SCSI result cleanup, part 2
Subsystems (43)
v3 cover SCSI result cleanup, part 2
Hi all,
here is now my alternative approach on how the SCSI result could be cleaned up. It's based on the observation that two fields (namely driver_byte and message_byte) are essentially unused.
The driver byte really is an unloved thing, with very few drivers using it, and not really consistent, either.
It's only DRIVER_SENSE which has a meaning for userspace, and that just indicates if a sense code is present; as such it can easily inferred by looking at the sense code itself.
The message byte is a different story, as it's being used internally by some SCSI parallel drivers. But even here, in the end the message byte is only ever relevant for SCSI EH, and that just checks if any message byte is set apart from COMMAND_COMPLETE.
And we have the SCp.Message field, which can be used to hold the message values for drivers which had been using the message byte in the SCSI result. If we do that the message byte itself becomes irrelevant and can be dropped, too.
So with this approach we can stop using the driver_byte and the message_byte values in the SCSI result, which means we only have two values (host byte and status byte) left to deal with.
My plan here is move every driver to use accessors for the remaining bytes in the SCSI result, and with that move the SCSI result over into two separate values.
A patchset implementing this can be found at:
git://git.kernel.org/pub/scm/linux/kernel/hare/scsi-devel.git
scsi-result-rework
This patchset is the first part of that; later parts will be posted once this one is accepted.
As it has been noted that there is a confusion between 'status_byte()' (which returns the linux status code) and 'get_status_byte()' (which returns the SAM status code) I've added another patch to rip out the linux-specific SCSI status code; they have been obsoleted years ago and it's time for them to go.
As usual, comments and reviews are welcome.
Changes to v2:
- Include reviews from Finn Thain and Christoph
- Add a new patch to modify response handling in
scsi_mode_sense() as suggested by Christoph
Changes to v1:
- Drop patches not relevant to this series
- Include reviews from Bart and Doug Gilbert
- Add patch to remove status_byte()
Hannes Reinecke (40):
st: return error code in st_scsi_execute()
scsi_ioctl: return error code when blk_rq_map_kern() fails
scsi: Fixup calling convention for scsi_mode_sense()
scsi: reshuffle response handling in scsi_mode_sense()
scsi_dh_alua: check for negative result value
scsi: stop using DRIVER_ERROR
scsi: introduce scsi_build_sense()
scsi: introduce scsi_status_is_check_condition()
scsi: Kill DRIVER_SENSE
scsi: do not use DRIVER_INVALID
scsi_error: use DID_TIME_OUT instead of DRIVER_TIMEOUT
xen-scsiback: use DID_ERROR instead of DRIVER_ERROR
xen-scsifront: compability status handling
scsi: Drop the now obsolete driver_byte definitions
NCR5380: Fold SCSI message ABORT onto DID_ABORT
scsi: add get_{status,host}_byte() accessor function
scsi: add scsi_msg_to_host_byte()
dc395: use standard macros to set SCSI result
dc395: translate message bytes
qlogicfas408: make ql_pcmd() a void function
qlogicfas408: whitespace cleanup
qlogicfas408: translate message to host byte status
nsp32: whitespace cleanup
nsp32: do not set message byte
wd33c93: translate message byte to host byte
mesh: translate message to host byte status
acornscsi: remove acornscsi_reportstatus()
acornscsi: translate message byte to host byte
aha152x: modify done() to use separate status bytes
aha152x: do not set message byte when calling scsi_done()
advansys: do not set message byte in SCSI status
fas216: translate message to host byte status
fas216: Use get_status_byte() to avoid using linux-specific status
codes
FlashPoint: Use standard SCSI definitions
fdomain: drop last argument to fdomain_finish_cmd()
fdomain: translate message to host byte status
scsi: drop message byte helper
scsi: kill message byte
target: use standard SAM status types
scsi: drop obsolete linux-specific SCSI status codes
Documentation/scsi/scsi_mid_low_api.rst | 7 +- block/bsg-lib.c | 2 +- block/bsg.c | 4 +- block/scsi_ioctl.c | 13 +- drivers/ata/libata-scsi.c | 30 +- drivers/infiniband/ulp/srp/ib_srp.c | 2 +- drivers/s390/scsi/zfcp_scsi.c | 5 +- drivers/scsi/3w-9xxx.c | 2 +- drivers/scsi/3w-xxxx.c | 6 +- drivers/scsi/53c700.c | 6 +- drivers/scsi/FlashPoint.c | 165 ++++---- drivers/scsi/NCR5380.c | 10 +- drivers/scsi/advansys.c | 4 - drivers/scsi/aha152x.c | 33 +- drivers/scsi/aic7xxx/aic79xx_osm.c | 19 +- drivers/scsi/aic7xxx/aic7xxx_osm.c | 1 - drivers/scsi/arcmsr/arcmsr_hba.c | 5 +- drivers/scsi/arm/acornscsi.c | 46 +-- drivers/scsi/arm/fas216.c | 15 +- drivers/scsi/ch.c | 5 +- drivers/scsi/constants.c | 15 - drivers/scsi/cxlflash/superpipe.c | 3 +- drivers/scsi/dc395x.c | 80 ++-- drivers/scsi/device_handler/scsi_dh_alua.c | 8 +- drivers/scsi/esas2r/esas2r_main.c | 2 +- drivers/scsi/esp_scsi.c | 4 +- drivers/scsi/fdomain.c | 22 +- drivers/scsi/hptiop.c | 2 +- drivers/scsi/ibmvscsi/ibmvscsi.c | 2 +- drivers/scsi/libiscsi.c | 5 +- drivers/scsi/lpfc/lpfc_scsi.c | 54 +-- drivers/scsi/megaraid.c | 20 +- drivers/scsi/megaraid/megaraid_mbox.c | 25 +- drivers/scsi/megaraid/megaraid_sas_base.c | 2 - drivers/scsi/megaraid/megaraid_sas_fusion.c | 1 - drivers/scsi/mesh.c | 9 +- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 14 +- drivers/scsi/mvumi.c | 10 +- drivers/scsi/myrb.c | 64 +-- drivers/scsi/myrs.c | 9 +- drivers/scsi/nsp32.c | 419 +++++++++++--------- drivers/scsi/ps3rom.c | 7 +- drivers/scsi/qla2xxx/qla_isr.c | 15 +- drivers/scsi/qlogicfas408.c | 137 ++++--- drivers/scsi/scsi.c | 11 +- drivers/scsi/scsi_debug.c | 15 +- drivers/scsi/scsi_error.c | 70 ++-- drivers/scsi/scsi_ioctl.c | 7 +- drivers/scsi/scsi_lib.c | 119 +++--- drivers/scsi/scsi_logging.c | 10 +- drivers/scsi/scsi_scan.c | 6 +- drivers/scsi/scsi_transport_sas.c | 9 +- drivers/scsi/scsi_transport_spi.c | 2 +- drivers/scsi/sd.c | 63 +-- drivers/scsi/sd_zbc.c | 3 +- drivers/scsi/sg.c | 9 +- drivers/scsi/smartpqi/smartpqi_init.c | 3 +- drivers/scsi/sr.c | 4 +- drivers/scsi/sr_ioctl.c | 6 +- drivers/scsi/st.c | 8 +- drivers/scsi/stex.c | 9 +- drivers/scsi/sym53c8xx_2/sym_glue.c | 6 +- drivers/scsi/ufs/ufshcd.c | 2 +- drivers/scsi/virtio_scsi.c | 5 +- drivers/scsi/vmw_pvscsi.c | 6 - drivers/scsi/wd33c93.c | 43 +- drivers/scsi/xen-scsifront.c | 8 +- drivers/target/loopback/tcm_loop.c | 1 - drivers/target/target_core_alua.c | 6 +- drivers/target/target_core_iblock.c | 2 +- drivers/target/target_core_pr.c | 8 +- drivers/target/target_core_pscsi.c | 2 +- drivers/target/target_core_sbc.c | 10 +- drivers/target/target_core_spc.c | 14 +- drivers/target/target_core_xcopy.c | 2 +- drivers/usb/storage/cypress_atacb.c | 4 +- drivers/xen/xen-scsiback.c | 17 +- include/scsi/scsi.h | 38 +- include/scsi/scsi_cmnd.h | 38 +- include/scsi/scsi_proto.h | 22 +- include/scsi/sg.h | 33 ++ include/trace/events/scsi.h | 48 +-- 82 files changed, 908 insertions(+), 1070 deletions(-)
Signature · 1 line
2.29.2
PATCH v3 1/40 st: return error code in st_scsi_execute()
The callers to st_scsi_execute already check for negative return values, so we can drop the use of DRIVER_ERROR and return the actual error code.
--- drivers/scsi/st.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/st.c +2 -2
@@ -551,7 +551,7 @@ static int st_scsi_execute(struct st_request *SRpnt, const unsigned char *cmd, data_direction ==DMA_TO_DEVICE ? REQ_OP_SCSI_OUT : REQ_OP_SCSI_IN, 0);if (IS_ERR (req)) -return DRIVER_ERROR <<24 ; +return PTR_ERR (req); rq =scsi_req (req); req->rq_flags |=RQF_QUIET ;
@@ -562,7 +562,7 @@ static int st_scsi_execute(struct st_request *SRpnt, const unsigned char *cmd, GFP_KERNEL);if (err) {blk_put_request (req); -return DRIVER_ERROR <<24 ; +return err; } }
Signature · 1 line
2.29.2
PATCH v3 2/40 scsi_ioctl: return error code when blk_rq_map_kern() fails
In reply to Hannes ReineckeThe callers of sg_scsi_ioctl() already check for negative return values, so we can drop the usage of DRIVER_ERROR and return the error from blk_rq_map_kern() instead.
--- block/scsi_ioctl.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
block/scsi_ioctl.c +4 -3
@@ -488,9 +488,10 @@ int sg_scsi_ioctl(struct request_queue *q, struct gendisk *disk, fmode_t mode,break ; } -if (bytes &&blk_rq_map_kern (q, rq, buffer, bytes,GFP_NOIO )) { - err =DRIVER_ERROR <<24 ; - goto error; +if (bytes) { + err =blk_rq_map_kern (q, rq, buffer, bytes,GFP_NOIO ); +if (err) + goto error; }blk_execute_rq (disk, rq,0 );
Signature · 1 line
2.29.2
PATCH v3 3/40 scsi: Fixup calling convention for scsi_mode_sense()
In reply to Hannes ReineckeThe description for scsi_mode_sense() claims to return the number of valid bytes on success, which is not what the code does. Additionally there is no gain in returning the scsi status, as everything the callers do is to check against scsi_result_is_good(), which is what scsi_mode_sense() does already.
So change the calling convention to return a standard error code on failure, and 0 on success, and adapt the description and all callers.
--- drivers/scsi/scsi_lib.c | 10 ++++++---- drivers/scsi/scsi_transport_sas.c | 9 ++++----- drivers/scsi/sd.c | 12 ++++++------ drivers/scsi/sr.c | 2 +- 4 files changed, 17 insertions(+), 16 deletions(-)
drivers/scsi/scsi_lib.c +6 -4
@@ -2135,9 +2135,7 @@ EXPORT_SYMBOL_GPL(scsi_mode_select);* @sshdr: place to put sense data (or NULL if no sense to be collected). * must be SCSI_SENSE_BUFFERSIZE big. * -* Returns zero if unsuccessful, or the header offset (either 4 -* or 8 depending on whether a six or ten byte command was -* issued) if successful. +* Returns zero if successful, or a negative error number on failure */ int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
@@ -2184,6 +2182,8 @@ scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage, result =scsi_execute_req (sdev, cmd,DMA_FROM_DEVICE , buffer, len, sshdr, timeout, retries,NULL ); +if (result <0 ) +return result;/* This code looks awful: what it's doing is making sure an * ILLEGAL REQUEST sense return identifies the actual command
@@ -2228,13 +2228,15 @@ scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage, data->block_descriptor_length = buffer[3 ]; } data->header_length = header_length; + result =0 ; }else if ((status_byte (result) ==CHECK_CONDITION ) &&scsi_sense_valid (sshdr) && sshdr->sense_key ==UNIT_ATTENTION && retry_count) { retry_count--; goto retry; } - +if (result >0 ) + result = -EIO ;return result; }EXPORT_SYMBOL (scsi_mode_sense);
drivers/scsi/scsi_transport_sas.c +4 -5
@@ -1229,16 +1229,15 @@ int sas_read_port_mode_page(struct scsi_device *sdev)char *buffer =kzalloc (BUF_SIZE ,GFP_KERNEL ), *msdata;struct sas_end_device *rdev =sas_sdev_to_rdev (sdev);struct scsi_mode_data mode_data; -int res, error; +int error;if (!buffer)return -ENOMEM ; - res =scsi_mode_sense (sdev,1 ,0x19 , buffer,BUF_SIZE ,30 *HZ ,3 , - &mode_data,NULL ); + error =scsi_mode_sense (sdev,1 ,0x19 , buffer,BUF_SIZE ,30 *HZ ,3 , + &mode_data,NULL ); - error = -EINVAL ; -if (!scsi_status_is_good (res)) +if (error) goto out; msdata = buffer + mode_data.header_length +
drivers/scsi/sd.c +6 -6
@@ -2670,18 +2670,18 @@ sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer)* 5: Illegal Request, Sense Code 24: Invalid field in * CDB. */ -if (!scsi_status_is_good (res)) +if (res <0 ) res =sd_do_mode_sense (sdkp,0 ,0 , buffer,4 , &data,NULL );/* * Third attempt: ask 255 bytes, as we did earlier. */ -if (!scsi_status_is_good (res)) +if (res <0 ) res =sd_do_mode_sense (sdkp,0 ,0x3F , buffer,255 , &data,NULL ); } -if (!scsi_status_is_good (res)) { +if (res <0 ) {sd_first_printk (KERN_WARNING , sdkp,"Test WP failed, assume Write Enabled\n" ); }else {
@@ -2742,7 +2742,7 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer) res =sd_do_mode_sense (sdkp, dbd, modepage, buffer, first_len, &data, &sshdr); -if (!scsi_status_is_good (res)) +if (res <0 ) goto bad_sense;if (!data.header_length) {
@@ -2774,7 +2774,7 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer) res =sd_do_mode_sense (sdkp, dbd, modepage, buffer, len, &data, &sshdr); -if (scsi_status_is_good (res)) { +if (!res) {int offset = data.header_length + data.block_descriptor_length;while (offset < len) {
@@ -2892,7 +2892,7 @@ static void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer) res =scsi_mode_sense (sdp,1 ,0x0a , buffer,36 ,SD_TIMEOUT , sdkp->max_retries, &data, &sshdr); -if (!scsi_status_is_good (res) || !data.header_length || +if (res <0 || !data.header_length || data.length <6 ) {sd_first_printk (KERN_WARNING , sdkp,"getting Control mode page failed, assume no ATO\n" );
drivers/scsi/sr.c +1 -1
@@ -911,7 +911,7 @@ static void get_capabilities(struct scsi_cd *cd) rc =scsi_mode_sense (cd->device,0 ,0x2a , buffer, ms_len,SR_TIMEOUT ,3 , &data,NULL ); -if (!scsi_status_is_good (rc) || data.length > ms_len || +if (rc <0 || data.length > ms_len || data.header_length + data.block_descriptor_length > data.length) {/* failed, drive doesn't have capabilities mode page */ cd->cdi.speed =1 ;
Signature · 1 line
2.29.2
PATCH v3 4/40 scsi: reshuffle response handling in scsi_mode_sense()
In reply to Hannes ReineckeReshuffle response handling in scsi_mode_sense() to make the code easier to follow.
--- drivers/scsi/scsi_lib.c | 75 ++++++++++++++++++++--------------------- 1 file changed, 37 insertions(+), 38 deletions(-)
drivers/scsi/scsi_lib.c +37 -38
@@ -2190,54 +2190,53 @@ scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,* byte as the problem. MODE_SENSE commands can return * ILLEGAL REQUEST if the code page isn't supported */ -if (use_10_for_ms && !scsi_status_is_good (result) && -driver_byte (result) ==DRIVER_SENSE ) { -if (scsi_sense_valid (sshdr)) { +if (!scsi_status_is_good (result)) { +if (driver_byte (result) ==DRIVER_SENSE && +scsi_sense_valid (sshdr)) {if ((sshdr->sense_key ==ILLEGAL_REQUEST ) && (sshdr->asc ==0x20 ) && (sshdr->ascq ==0 )) {/* * Invalid command operation code */ - sdev->use_10_for_ms =0 ; +if (use_10_for_ms) { + sdev->use_10_for_ms =0 ; + goto retry; + } + } +if ((status_byte (result) ==CHECK_CONDITION ) && + sshdr->sense_key ==UNIT_ATTENTION && + retry_count) { + retry_count--; goto retry; } } +return -EIO ; + } +if (unlikely (buffer[0 ] ==0x86 && buffer[1 ] ==0x0b && + (modepage ==6 || modepage ==8 ))) { +/* Initio breakage? */ + header_length =0 ; + data->length =13 ; + data->medium_type =0 ; + data->device_specific =0 ; + data->longlba =0 ; + data->block_descriptor_length =0 ; + }else if (use_10_for_ms) { + data->length = buffer[0 ]*256 + buffer[1 ] +2 ; + data->medium_type = buffer[2 ]; + data->device_specific = buffer[3 ]; + data->longlba = buffer[4 ] &0x01 ; + data->block_descriptor_length = buffer[6 ]*256 + + buffer[7 ]; + }else { + data->length = buffer[0 ] +1 ; + data->medium_type = buffer[1 ]; + data->device_specific = buffer[2 ]; + data->block_descriptor_length = buffer[3 ]; } + data->header_length = header_length; -if (scsi_status_is_good (result)) { -if (unlikely (buffer[0 ] ==0x86 && buffer[1 ] ==0x0b && - (modepage ==6 || modepage ==8 ))) { -/* Initio breakage? */ - header_length =0 ; - data->length =13 ; - data->medium_type =0 ; - data->device_specific =0 ; - data->longlba =0 ; - data->block_descriptor_length =0 ; - }else if (use_10_for_ms) { - data->length = buffer[0 ]*256 + buffer[1 ] +2 ; - data->medium_type = buffer[2 ]; - data->device_specific = buffer[3 ]; - data->longlba = buffer[4 ] &0x01 ; - data->block_descriptor_length = buffer[6 ]*256 - + buffer[7 ]; - }else { - data->length = buffer[0 ] +1 ; - data->medium_type = buffer[1 ]; - data->device_specific = buffer[2 ]; - data->block_descriptor_length = buffer[3 ]; - } - data->header_length = header_length; - result =0 ; - }else if ((status_byte (result) ==CHECK_CONDITION ) && -scsi_sense_valid (sshdr) && - sshdr->sense_key ==UNIT_ATTENTION && retry_count) { - retry_count--; - goto retry; - } -if (result >0 ) - result = -EIO ; -return result; +return 0 ; }EXPORT_SYMBOL (scsi_mode_sense);
Signature · 1 line
2.29.2
PATCH v3 5/40 scsi_dh_alua: check for negative result value
In reply to Hannes Reineckescsi_execute will now return a negative error if there was an error prior to command submission; evaluate that instead if checking for DRIVER_ERROR.
--- drivers/scsi/device_handler/scsi_dh_alua.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/scsi/device_handler/scsi_dh_alua.c +4 -4
@@ -562,12 +562,12 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg)kfree (buff);return SCSI_DH_OK ; } -if (!scsi_sense_valid (&sense_hdr)) { +if (result <0 || !scsi_sense_valid (&sense_hdr)) {sdev_printk (KERN_INFO , sdev,"%s: rtpg failed, result %d\n" ,ALUA_DH_NAME , retval);kfree (buff); -if (driver_byte (retval) ==DRIVER_ERROR ) +if (result <0 )return SCSI_DH_DEV_TEMP_BUSY ;return SCSI_DH_IO ; }
@@ -791,11 +791,11 @@ static unsigned alua_stpg(struct scsi_device *sdev, struct alua_port_group *pg) retval =submit_stpg (sdev, pg->group_id, &sense_hdr);if (retval) { -if (!scsi_sense_valid (&sense_hdr)) { +if (retval <0 || !scsi_sense_valid (&sense_hdr)) {sdev_printk (KERN_INFO , sdev,"%s: stpg failed, result %d" ,ALUA_DH_NAME , retval); -if (driver_byte (retval) ==DRIVER_ERROR ) +if (retval <0 )return SCSI_DH_DEV_TEMP_BUSY ; }else { sdev_printk(KERN_INFO, sdev, "%s: stpg failed\n",
Signature · 1 line
2.29.2
PATCH v3 6/40 scsi: stop using DRIVER_ERROR
In reply to Hannes ReineckeReturn the actual error code in __scsi_execute() (which, according to the documentation, should have happened anyway).
And audit all callers to cope with negative return values from __scsi_execute() and friends.
--- drivers/ata/libata-scsi.c | 8 ++++++++ drivers/scsi/ch.c | 3 ++- drivers/scsi/cxlflash/superpipe.c | 2 +- drivers/scsi/scsi.c | 2 ++ drivers/scsi/scsi_ioctl.c | 4 +++- drivers/scsi/scsi_lib.c | 15 +++++++++------ drivers/scsi/scsi_scan.c | 4 ++-- drivers/scsi/scsi_transport_spi.c | 2 +- drivers/scsi/sd.c | 15 +++++++++------ drivers/scsi/sd_zbc.c | 2 +- drivers/scsi/sr_ioctl.c | 4 ++++ drivers/scsi/ufs/ufshcd.c | 2 +- drivers/scsi/virtio_scsi.c | 2 +- include/scsi/scsi.h | 3 +++ 14 files changed, 47 insertions(+), 21 deletions(-)
drivers/ata/libata-scsi.c +8 -0
@@ -409,6 +409,10 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) cmd_result =scsi_execute (scsidev, scsi_cmd, data_dir, argbuf, argsize, sensebuf, &sshdr, (10 *HZ ),5 ,0 ,0 ,NULL ); +if (cmd_result <0 ) { + rc = cmd_result; + goto error; + }if (driver_byte (cmd_result) ==DRIVER_SENSE ) {/* sense data available */ u8 *desc = sensebuf +8 ; cmd_result &= ~(0xFF <<24 );/* DRIVER_SENSE is not an error */
@@ -490,6 +494,10 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) cmd_result =scsi_execute (scsidev, scsi_cmd,DMA_NONE ,NULL ,0 , sensebuf, &sshdr, (10 *HZ ),5 ,0 ,0 ,NULL ); +if (cmd_result <0 ) { + rc = cmd_result; + goto error; + }if (driver_byte (cmd_result) ==DRIVER_SENSE ) {/* sense data available */ u8 *desc = sensebuf +8 ; cmd_result &= ~(0xFF <<24 );/* DRIVER_SENSE is not an error */
drivers/scsi/ch.c +2 -1
@@ -198,7 +198,8 @@ ch_do_scsi(scsi_changer *ch, unsigned char *cmd, int cmd_len, result =scsi_execute_req (ch->device, cmd, direction, buffer, buflength, &sshdr, timeout *HZ ,MAX_RETRIES ,NULL ); - +if (result <0 ) +return result;if (driver_byte (result) ==DRIVER_SENSE ) {if (debug)scsi_print_sense_hdr (ch->device, ch->name, &sshdr);
drivers/scsi/cxlflash/superpipe.c +1 -1
@@ -369,7 +369,7 @@ static int read_cap16(struct scsi_device *sdev, struct llun_info *lli) goto out; } -if (driver_byte (result) ==DRIVER_SENSE ) { +if (result >0 &&driver_byte (result) ==DRIVER_SENSE ) { result &= ~(0xFF <<24 );/* DRIVER_SENSE is not an error */ if (result &SAM_STAT_CHECK_CONDITION ) {switch (sshdr.sense_key) {
drivers/scsi/scsi.c +2 -0
@@ -508,6 +508,8 @@ int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer, result =scsi_execute_req (sdev, cmd,DMA_FROM_DEVICE , buffer, len, &sshdr,30 *HZ ,3 ,NULL ); +if (result <0 ) +return result;if (result &&scsi_sense_valid (&sshdr) && sshdr.sense_key ==ILLEGAL_REQUEST && (sshdr.asc ==0x20 || sshdr.asc ==0x24 ) && sshdr.ascq ==0x00 )
drivers/scsi/scsi_ioctl.c +3 -1
@@ -101,6 +101,8 @@ static int ioctl_internal_command(struct scsi_device *sdev, char *cmd,SCSI_LOG_IOCTL (2 ,sdev_printk (KERN_INFO , sdev,"Ioctl returned 0x%x\n" , result)); +if (result <0 ) + goto out;if (driver_byte (result) ==DRIVER_SENSE &&scsi_sense_valid (&sshdr)) {switch (sshdr.sense_key) {
@@ -133,7 +135,7 @@ static int ioctl_internal_command(struct scsi_device *sdev, char *cmd,break ; } } - +out:SCSI_LOG_IOCTL (2 ,sdev_printk (KERN_INFO , sdev,"IOCTL Releasing command\n" ));return result;
drivers/scsi/scsi_lib.c +9 -6
@@ -245,20 +245,23 @@ int __scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, {struct request *req;struct scsi_request *rq; -int ret =DRIVER_ERROR <<24 ; +int ret; req =blk_get_request (sdev->request_queue, data_direction ==DMA_TO_DEVICE ?REQ_OP_SCSI_OUT :REQ_OP_SCSI_IN , rq_flags &RQF_PM ?BLK_MQ_REQ_PM :0 );if (IS_ERR (req)) -return ret; - rq =scsi_req (req); +return PTR_ERR (req); -if (bufflen &&blk_rq_map_kern (sdev->request_queue, req, - buffer, bufflen,GFP_NOIO )) - goto out; + rq =scsi_req (req); +if (bufflen) { + ret =blk_rq_map_kern (sdev->request_queue, req, + buffer, bufflen,GFP_NOIO ); +if (ret) + goto out; + } rq->cmd_len =COMMAND_SIZE (cmd[0 ]);memcpy (rq->cmd, cmd, rq->cmd_len); rq->retries = retries;
drivers/scsi/scsi_scan.c +2 -2
@@ -616,7 +616,7 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,"scsi scan: INQUIRY %s with code 0x%x\n" , result ? "failed" : "successful", result)); -if (result) { +if (result >0 ) {/* * not-ready to ready transition [asc/ascq=0x28/0x0] * or power-on, reset [asc/ascq=0x29/0x0], continue.
@@ -631,7 +631,7 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result, (sshdr.ascq == 0))continue ; } - }else { + }else if (result ==0 ) {/* * if nothing was transferred, we try * again. It's a workaround for some USB
drivers/scsi/scsi_transport_spi.c +1 -1
@@ -127,7 +127,7 @@ static int spi_execute(struct scsi_device *sdev, const void *cmd,REQ_FAILFAST_TRANSPORT |REQ_FAILFAST_DRIVER , RQF_PM, NULL); -if (driver_byte (result) !=DRIVER_SENSE || +if (result <0 ||driver_byte (result) !=DRIVER_SENSE || sshdr->sense_key !=UNIT_ATTENTION )break ; }
drivers/scsi/sd.c +9 -6
@@ -1658,7 +1658,7 @@ static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing) &sshdr);/* failed to execute TUR, assume media not present */ -if (host_byte (retval)) { +if (retval <0 ||host_byte (retval)) {set_media_not_present (sdkp); goto out; }
@@ -1719,6 +1719,9 @@ static int sd_sync_cache(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr)if (res) {sd_print_result (sdkp,"Synchronize Cache(10) failed" , res); +if (res <0 ) +return res; +if (driver_byte (res) ==DRIVER_SENSE )sd_print_sense_hdr (sdkp, sshdr);
@@ -1825,7 +1828,7 @@ static int sd_pr_command(struct block_device *bdev, u8 sa, result =scsi_execute_req (sdev, cmd,DMA_TO_DEVICE , &data,sizeof (data), &sshdr,SD_TIMEOUT , sdkp->max_retries,NULL ); -if (driver_byte (result) ==DRIVER_SENSE && +if (result >0 &&driver_byte (result) ==DRIVER_SENSE &&scsi_sense_valid (&sshdr)) {sdev_printk (KERN_INFO , sdev,"PR command failed: %d\n" , result);scsi_print_sense_hdr (sdev,NULL , &sshdr);
@@ -2177,7 +2180,7 @@ sd_spinup_disk(struct scsi_disk *sdkp) ((driver_byte (the_result) ==DRIVER_SENSE ) && sense_valid && sshdr.sense_key == UNIT_ATTENTION))); -if (driver_byte (the_result) !=DRIVER_SENSE ) { +if (the_result <0 ||driver_byte (the_result) !=DRIVER_SENSE ) {/* no sense, TUR either succeeded or failed * with a status error */ if (!spintime && !scsi_status_is_good (the_result)) {
@@ -2362,7 +2365,7 @@ static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,if (media_not_present (sdkp, &sshdr))return -ENODEV ; -if (the_result) { +if (the_result >0 ) { sense_valid =scsi_sense_valid (&sshdr); if (sense_valid && sshdr.sense_key == ILLEGAL_REQUEST &&
@@ -2447,7 +2450,7 @@ static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp,if (media_not_present (sdkp, &sshdr))return -ENODEV ; -if (the_result) { +if (the_result >0 ) { sense_valid =scsi_sense_valid (&sshdr); if (sense_valid && sshdr.sense_key == UNIT_ATTENTION &&
@@ -3591,7 +3594,7 @@ static int sd_start_stop_device(struct scsi_disk *sdkp, int start) SD_TIMEOUT, sdkp->max_retries, 0, RQF_PM, NULL);if (res) {sd_print_result (sdkp,"Start/Stop Unit failed" , res); -if (driver_byte (res) ==DRIVER_SENSE ) +if (res >0 &&driver_byte (res) ==DRIVER_SENSE )sd_print_sense_hdr (sdkp, &sshdr); if (scsi_sense_valid(&sshdr) &&/* 0x3a is medium not present */
drivers/scsi/sd_zbc.c +1 -1
@@ -116,7 +116,7 @@ static int sd_zbc_do_report_zones(struct scsi_disk *sdkp, unsigned char *buf,sd_printk (KERN_ERR , sdkp,"REPORT ZONES start lba %llu failed\n" , lba);sd_print_result (sdkp,"REPORT ZONES" , result); -if (driver_byte (result) ==DRIVER_SENSE && +if (result >0 &&driver_byte (result) ==DRIVER_SENSE &&scsi_sense_valid (&sshdr))sd_print_sense_hdr (sdkp, &sshdr);return -EIO ;
drivers/scsi/sr_ioctl.c +4 -0
@@ -205,6 +205,10 @@ int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc) cgc->timeout, IOCTL_RETRIES, 0, 0, NULL);/* Minimal error checking. Ignore cases we know about, and report the rest. */ +if (result <0 ) { + err = result; + goto out; + }if (driver_byte (result) !=0 ) {switch (sshdr->sense_key) {case UNIT_ATTENTION :
drivers/scsi/ufs/ufshcd.c +1 -1
@@ -8487,7 +8487,7 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,sdev_printk (KERN_WARNING , sdp,"START_STOP failed for power mode: %d, result %x\n" , pwr_mode, ret); -if (driver_byte (ret) ==DRIVER_SENSE ) +if (ret >0 &&driver_byte (ret) ==DRIVER_SENSE )scsi_print_sense_hdr (sdp,NULL , &sshdr); }
drivers/scsi/virtio_scsi.c +1 -1
@@ -355,7 +355,7 @@ static void virtscsi_rescan_hotunplug(struct virtio_scsi *vscsi)if (result ==0 && inq_result[0 ] >>5 ) {/* PQ indicates the LUN is not attached */ scsi_remove_device (sdev); - }else if (host_byte (result) ==DID_BAD_TARGET ) { + }else if (result >0 &&host_byte (result) ==DID_BAD_TARGET ) {/* * If all LUNs of a virtio-scsi device are unplugged * it will respond with BAD TARGET on any INQUIRY
include/scsi/scsi.h +3 -0
@@ -40,6 +40,9 @@ enum scsi_timeouts {*/ static inline int scsi_status_is_good (int status) { +if (status <0 ) +return false; +/* * FIXME: bit0 is listed as reserved in SCSI-2, but is * significant in SCSI-3. For now, we follow the SCSI-2
Signature · 1 line
2.29.2
PATCH v3 7/40 scsi: introduce scsi_build_sense()
In reply to Hannes ReineckeIntroduce scsi_build_sense() as a wrapper around scsi_build_sense_buffer() to format the buffer and set the correct SCSI status.
--- drivers/ata/libata-scsi.c | 7 +-- drivers/s390/scsi/zfcp_scsi.c | 5 +-- drivers/scsi/3w-xxxx.c | 2 +- drivers/scsi/libiscsi.c | 5 +-- drivers/scsi/lpfc/lpfc_scsi.c | 54 ++++++++-------------- drivers/scsi/megaraid.c | 8 ++-- drivers/scsi/megaraid/megaraid_mbox.c | 14 +++--- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 14 ++---- drivers/scsi/mvumi.c | 5 +-- drivers/scsi/myrb.c | 64 +++++++-------------------- drivers/scsi/myrs.c | 9 +--- drivers/scsi/ps3rom.c | 7 +-- drivers/scsi/qla2xxx/qla_isr.c | 15 ++----- drivers/scsi/scsi_debug.c | 11 ++--- drivers/scsi/scsi_lib.c | 18 ++++++++ drivers/scsi/smartpqi/smartpqi_init.c | 3 +- drivers/scsi/stex.c | 5 +-- include/scsi/scsi_cmnd.h | 3 ++ 18 files changed, 85 insertions(+), 164 deletions(-)
drivers/ata/libata-scsi.c +2 -5
@@ -196,9 +196,7 @@ void ata_scsi_set_sense(struct ata_device *dev, struct scsi_cmnd *cmd,if (!cmd)return ; - cmd->result = (DRIVER_SENSE <<24 ) |SAM_STAT_CHECK_CONDITION ; - -scsi_build_sense_buffer (d_sense, cmd->sense_buffer, sk, asc, ascq); +scsi_build_sense (cmd, d_sense, sk, asc, ascq); } void ata_scsi_set_sense_information(struct ata_device *dev,
@@ -882,8 +880,7 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)* ATA PASS-THROUGH INFORMATION AVAILABLE * Always in descriptor format sense. */ -scsi_build_sense_buffer (1 , cmd->sense_buffer, -RECOVERED_ERROR ,0 ,0x1D ); +scsi_build_sense (cmd,1 ,RECOVERED_ERROR ,0 ,0x1D ); }if ((cmd->sense_buffer[0 ] &0x7f ) >=0x72 ) {
drivers/s390/scsi/zfcp_scsi.c +1 -4
@@ -856,10 +856,7 @@ void zfcp_scsi_set_prot(struct zfcp_adapter *adapter)*/ void zfcp_scsi_dif_sense_error (struct scsi_cmnd *scmd,int ascq) { -scsi_build_sense_buffer (1 , scmd->sense_buffer, -ILLEGAL_REQUEST ,0x10 , ascq); -set_driver_byte (scmd,DRIVER_SENSE ); - scmd->result |=SAM_STAT_CHECK_CONDITION ; +scsi_build_sense (scmd,1 ,ILLEGAL_REQUEST ,0x10 , ascq);set_host_byte (scmd,DID_SOFT_ERROR ); }
drivers/scsi/3w-xxxx.c +1 -1
@@ -1977,7 +1977,7 @@ static int tw_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cprintk (KERN_NOTICE "3w-xxxx: scsi%d: Unknown scsi opcode: 0x%x\n" , tw_dev->host->host_no, *command); tw_dev->state[request_id] =TW_S_COMPLETED ;tw_state_request_finish (tw_dev, request_id); -scsi_build_sense_buffer (1 , SCpnt->sense_buffer,ILLEGAL_REQUEST ,0x20 ,0 ); +scsi_build_sense (SCpnt,1 ,ILLEGAL_REQUEST ,0x20 ,0 );done (SCpnt); retval =0 ; }
drivers/scsi/libiscsi.c +1 -4
@@ -829,10 +829,7 @@ static void iscsi_scsi_cmd_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr, ascq = session->tt->check_protection (task, §or);if (ascq) { - sc->result =DRIVER_SENSE <<24 | -SAM_STAT_CHECK_CONDITION ; -scsi_build_sense_buffer (1 , sc->sense_buffer, -ILLEGAL_REQUEST ,0x10 , ascq); +scsi_build_sense (sc,1 ,ILLEGAL_REQUEST ,0x10 , ascq);scsi_set_sense_information (sc->sense_buffer,SCSI_SENSE_BUFFERSIZE , sector);
drivers/scsi/lpfc/lpfc_scsi.c +18 -36
108 lines not on this page · raw message
drivers/scsi/megaraid.c +3 -5
@@ -1596,11 +1596,9 @@ mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status) cmd->result = (DRIVER_SENSE <<24 ) | (DID_OK <<16 ) | (CHECK_CONDITION <<1 ); - }else { - cmd->sense_buffer[0 ] =0x70 ; - cmd->sense_buffer[2 ] =ABORTED_COMMAND ; - cmd->result |= (CHECK_CONDITION <<1 ); - } + }else +scsi_build_sense (cmd,0 , +ABORTED_COMMAND ,0 ,0 ); }break ;
drivers/scsi/megaraid/megaraid_mbox.c +5 -9
@@ -1574,10 +1574,8 @@ megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy) }if (scp->cmnd[1 ] &MEGA_SCSI_INQ_EVPD ) { - scp->sense_buffer[0 ] =0x70 ; - scp->sense_buffer[2 ] =ILLEGAL_REQUEST ; - scp->sense_buffer[12 ] =MEGA_INVALID_FIELD_IN_CDB ; - scp->result =CHECK_CONDITION <<1 ; +scsi_build_sense (scp,0 ,ILLEGAL_REQUEST , +MEGA_INVALID_FIELD_IN_CDB ,0 );return NULL ; }
@@ -2313,11 +2311,9 @@ megaraid_mbox_dpc(unsigned long devp) scp->result =DRIVER_SENSE <<24 |DID_OK <<16 |CHECK_CONDITION <<1 ; - }else { - scp->sense_buffer[0 ] =0x70 ; - scp->sense_buffer[2 ] =ABORTED_COMMAND ; - scp->result =CHECK_CONDITION <<1 ; - } + }else +scsi_build_sense (scp,0 , +ABORTED_COMMAND ,0 ,0 ); }break ;
drivers/scsi/mpt3sas/mpt3sas_scsih.c +4 -10
@@ -5077,10 +5077,8 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status) ascq =0x00 ;break ; } -scsi_build_sense_buffer (0 , scmd->sense_buffer,ILLEGAL_REQUEST ,0x10 , - ascq); - scmd->result =DRIVER_SENSE <<24 | (DID_ABORT <<16 ) | -SAM_STAT_CHECK_CONDITION ; +scsi_build_sense (scmd,0 ,ILLEGAL_REQUEST ,0x10 , ascq); +set_host_byte (scmd,DID_ABORT ); }/**
@@ -5837,12 +5835,8 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)else if (!xfer_cnt && scmd->cmnd[0 ] ==REPORT_LUNS ) { mpi_reply->SCSIState =MPI2_SCSI_STATE_AUTOSENSE_VALID ; mpi_reply->SCSIStatus =SAM_STAT_CHECK_CONDITION ; - scmd->result = (DRIVER_SENSE <<24 ) | -SAM_STAT_CHECK_CONDITION ; - scmd->sense_buffer[0 ] =0x70 ; - scmd->sense_buffer[2 ] =ILLEGAL_REQUEST ; - scmd->sense_buffer[12 ] =0x20 ; - scmd->sense_buffer[13 ] =0 ; +scsi_build_sense (scmd,0 ,ILLEGAL_REQUEST , +0x20 ,0 ); }break ;
drivers/scsi/mvumi.c +1 -4
@@ -2068,10 +2068,7 @@ static unsigned char mvumi_build_frame(struct mvumi_hba *mhba,return 0 ; error: - scmd->result = (DID_OK <<16 ) | (DRIVER_SENSE <<24 ) | -SAM_STAT_CHECK_CONDITION ; -scsi_build_sense_buffer (0 , scmd->sense_buffer,ILLEGAL_REQUEST ,0x24 , -0 ); +scsi_build_sense (scmd,0 ,ILLEGAL_REQUEST ,0x24 ,0 );return -1 ; }
drivers/scsi/myrb.c +15 -49
145 lines not on this page · raw message
drivers/scsi/myrs.c +2 -7
@@ -1600,9 +1600,7 @@ static int myrs_queuecommand(struct Scsi_Host *shost,switch (scmd->cmnd[0 ]) {case REPORT_LUNS : -scsi_build_sense_buffer (0 , scmd->sense_buffer,ILLEGAL_REQUEST , -0x20 ,0x0 ); - scmd->result = (DRIVER_SENSE <<24 ) |SAM_STAT_CHECK_CONDITION ; +scsi_build_sense (scmd,0 ,ILLEGAL_REQUEST ,0x20 ,0x0 ); scmd->scsi_done (scmd);return 0 ;case MODE_SENSE :
@@ -1612,10 +1610,7 @@ static int myrs_queuecommand(struct Scsi_Host *shost,if ((scmd->cmnd[2 ] &0x3F ) !=0x3F && (scmd->cmnd[2 ] &0x3F ) !=0x08 ) {/* Illegal request, invalid field in CDB */ -scsi_build_sense_buffer (0 , scmd->sense_buffer, -ILLEGAL_REQUEST ,0x24 ,0 ); - scmd->result = (DRIVER_SENSE <<24 ) | -SAM_STAT_CHECK_CONDITION ; +scsi_build_sense (scmd,0 ,ILLEGAL_REQUEST ,0x24 ,0 ); }else {myrs_mode_sense (cs, scmd, ldev_info); scmd->result = (DID_OK <<16 );
drivers/scsi/ps3rom.c +2 -5
@@ -234,10 +234,8 @@ static int ps3rom_queuecommand_lck(struct scsi_cmnd *cmd, }if (res) { -memset (cmd->sense_buffer,0 ,SCSI_SENSE_BUFFERSIZE ); +scsi_build_sense (cmd,0 ,ILLEGAL_REQUEST ,0 ,0 ); cmd->result = res; - cmd->sense_buffer[0 ] =0x70 ; - cmd->sense_buffer[2 ] =ILLEGAL_REQUEST ; priv->curr_cmd =NULL ; cmd->scsi_done (cmd); }
@@ -319,8 +317,7 @@ static irqreturn_t ps3rom_interrupt(int irq, void *data) goto done; } -scsi_build_sense_buffer (0 , cmd->sense_buffer, sense_key, asc, ascq); - cmd->result =SAM_STAT_CHECK_CONDITION ; +scsi_build_sense (cmd,0 , sense_key, asc, ascq); done: priv->curr_cmd =NULL ;
drivers/scsi/qla2xxx/qla_isr.c +3 -12
@@ -2694,31 +2694,22 @@ qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24)/* check guard */ if (e_guard != a_guard) { -scsi_build_sense_buffer (1 , cmd->sense_buffer,ILLEGAL_REQUEST , -0x10 ,0x1 ); -set_driver_byte (cmd,DRIVER_SENSE ); +scsi_build_sense (cmd,1 ,ILLEGAL_REQUEST ,0x10 ,0x1 );set_host_byte (cmd,DID_ABORT ); - cmd->result |=SAM_STAT_CHECK_CONDITION ;return 1 ; }/* check ref tag */ if (e_ref_tag != a_ref_tag) { -scsi_build_sense_buffer (1 , cmd->sense_buffer,ILLEGAL_REQUEST , -0x10 ,0x3 ); -set_driver_byte (cmd,DRIVER_SENSE ); +scsi_build_sense (cmd,1 ,ILLEGAL_REQUEST ,0x10 ,0x3 );set_host_byte (cmd,DID_ABORT ); - cmd->result |=SAM_STAT_CHECK_CONDITION ;return 1 ; }/* check appl tag */ if (e_app_tag != a_app_tag) { -scsi_build_sense_buffer (1 , cmd->sense_buffer,ILLEGAL_REQUEST , -0x10 ,0x2 ); -set_driver_byte (cmd,DRIVER_SENSE ); +scsi_build_sense (cmd,1 ,ILLEGAL_REQUEST ,0x10 ,0x2 );set_host_byte (cmd,DID_ABORT ); - cmd->result |=SAM_STAT_CHECK_CONDITION ;return 1 ; }
drivers/scsi/scsi_debug.c +4 -7
@@ -931,7 +931,7 @@ static void mk_sense_invalid_fld(struct scsi_cmnd *scp, } asc = c_d ?INVALID_FIELD_IN_CDB :INVALID_FIELD_IN_PARAM_LIST ;memset (sbuff,0 ,SCSI_SENSE_BUFFERSIZE ); -scsi_build_sense_buffer (sdebug_dsense, sbuff,ILLEGAL_REQUEST , asc,0 ); +scsi_build_sense (scp, sdebug_dsense,ILLEGAL_REQUEST , asc,0 );memset (sks,0 ,sizeof (sks)); sks[0 ] =0x80 ;if (c_d)
@@ -957,17 +957,14 @@ static void mk_sense_invalid_fld(struct scsi_cmnd *scp,static void mk_sense_buffer (struct scsi_cmnd *scp,int key,int asc,int asq) { -unsigned char *sbuff; - - sbuff = scp->sense_buffer; -if (!sbuff) { +if (!scp->sense_buffer) {sdev_printk (KERN_ERR , scp->device,"%s: sense_buffer is NULL\n" , __func__);return ; } -memset (sbuff,0 ,SCSI_SENSE_BUFFERSIZE ); +memset (scp->sense_buffer,0 ,SCSI_SENSE_BUFFERSIZE ); -scsi_build_sense_buffer (sdebug_dsense, sbuff, key, asc, asq); +scsi_build_sense (scp, sdebug_dsense, key, asc, asq);if (sdebug_verbose) sdev_printk(KERN_INFO, scp->device,
drivers/scsi/scsi_lib.c +18 -0
@@ -3264,3 +3264,21 @@ int scsi_vpd_tpg_id(struct scsi_device *sdev, int *rel_id)return group_id; }EXPORT_SYMBOL (scsi_vpd_tpg_id); + +/** +* scsi_build_sense - build sense data for a command +* @scmd: scsi command for which the sense should be formatted +* @desc: Sense format (non-zero == descriptor format, +* 0 == fixed format) +* @key: Sense key +* @asc: Additional sense code +* @ascq: Additional sense code qualifier +* +**/ +void scsi_build_sense (struct scsi_cmnd *scmd,int desc,u8 key,u8 asc,u8 ascq) +{ +scsi_build_sense_buffer (desc, scmd->sense_buffer, key, asc, ascq); + scmd->result = (DRIVER_SENSE <<24 ) | (DID_OK <<16 ) | +SAM_STAT_CHECK_CONDITION ; +} +EXPORT_SYMBOL_GPL (scsi_build_sense);
drivers/scsi/smartpqi/smartpqi_init.c +1 -2
@@ -3088,8 +3088,7 @@ static void pqi_process_aio_io_error(struct pqi_io_request *io_request) }if (device_offline && sense_data_length ==0 ) -scsi_build_sense_buffer (0 , scmd->sense_buffer,HARDWARE_ERROR , -0x3e ,0x1 ); +scsi_build_sense (scmd,0 ,HARDWARE_ERROR ,0x3e ,0x1 ); scmd->result = scsi_status;set_host_byte (scmd, host_byte);
drivers/scsi/stex.c +1 -4
@@ -398,11 +398,8 @@ static struct status_msg *stex_get_status(struct st_hba *hba)static void stex_invalid_field (struct scsi_cmnd *cmd,void (*done)(struct scsi_cmnd *)) { - cmd->result = (DRIVER_SENSE <<24 ) |SAM_STAT_CHECK_CONDITION ; -/* "Invalid field in cdb" */ -scsi_build_sense_buffer (0 , cmd->sense_buffer,ILLEGAL_REQUEST ,0x24 , -0x0 ); +scsi_build_sense (cmd,0 ,ILLEGAL_REQUEST ,0x24 ,0x0 );done (cmd); }
include/scsi/scsi_cmnd.h +3 -0
@@ -342,4 +342,7 @@ static inline unsigned scsi_transfer_length(struct scsi_cmnd *scmd) return xfer_len; } +extern void scsi_build_sense (struct scsi_cmnd *scmd,int desc, +u8 key,u8 asc,u8 ascq); +#endif /* _SCSI_SCSI_CMND_H */
Signature · 1 line
2.29.2
PATCH v3 10/40 scsi: do not use DRIVER_INVALID
In reply to Hannes ReineckeThere is no point in returning DID_ABORT together with DRIVER_INVALID, as the caller couldn't care less where the abort originated. So drop the use of DRIVER_INVALID.
--- drivers/scsi/hptiop.c | 2 +- drivers/scsi/mvumi.c | 4 ++-- drivers/scsi/vmw_pvscsi.c | 3 --- 3 files changed, 3 insertions(+), 6 deletions(-)
drivers/scsi/hptiop.c +1 -1
@@ -760,7 +760,7 @@ static void hptiop_finish_scsi_req(struct hptiop_hba *hba, u32 tag, goto skip_resid;default : - scp->result =DRIVER_INVALID <<24 |DID_ABORT <<16 ; + scp->result =DID_ABORT <<16 ;break ; }
drivers/scsi/mvumi.c +2 -2
@@ -1320,7 +1320,7 @@ static void mvumi_complete_cmd(struct mvumi_hba *mhba, struct mvumi_cmd *cmd, }break ;default : - scmd->result |= (DRIVER_INVALID <<24 ) | (DID_ABORT <<16 ); + scmd->result |= (DID_ABORT <<16 );break ; }
@@ -2127,7 +2127,7 @@ static enum blk_eh_timer_return mvumi_timed_out(struct scsi_cmnd *scmd)else atomic_dec (&mhba->fw_outstanding); - scmd->result = (DRIVER_INVALID <<24 ) | (DID_ABORT <<16 ); + scmd->result = (DID_ABORT <<16 ); scmd->SCp.ptr =NULL ;if (scsi_bufflen (scmd)) { dma_unmap_sg(&mhba->pdev->dev, scsi_sglist(scmd),
drivers/scsi/vmw_pvscsi.c +0 -3
@@ -601,9 +601,6 @@ static void pvscsi_complete_request(struct pvscsi_adapter *adapter,case BTSTAT_LUNMISMATCH :case BTSTAT_TAGREJECT :case BTSTAT_BADMSG : - cmd->result = (DRIVER_INVALID <<24 ); - fallthrough; -case BTSTAT_HAHARDWARE :case BTSTAT_INVPHASE :case BTSTAT_HATIMEOUT :
Signature · 1 line
2.29.2
PATCH v3 12/40 xen-scsiback: use DID_ERROR instead of DRIVER_ERROR
In reply to Hannes ReineckeDRIVER_ERROR was supposed to signal an error generated by the driver, which xen-scsiback arguably isn't. Also the driver bytes don't have a detailed error recovery, so we should rather return DID_ERROR instead of DRIVER_ERROR.
--- drivers/xen/xen-scsiback.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/xen/xen-scsiback.c +4 -4
@@ -719,10 +719,10 @@ static int scsiback_do_cmd_fn(struct vscsibk_info *info, result =DID_NO_CONNECT ;break ;default : - result =DRIVER_ERROR ; + result =DID_ERROR ;break ; } -scsiback_send_response (info,NULL , result <<24 ,0 , +scsiback_send_response (info,NULL , result <<16 ,0 , ring_req.rqid);return 1 ; }
@@ -732,7 +732,7 @@ static int scsiback_do_cmd_fn(struct vscsibk_info *info,if (scsiback_gnttab_data_map (&ring_req, pending_req)) {scsiback_fast_flush_area (pending_req);scsiback_do_resp_with_sense (NULL , -DRIVER_ERROR <<24 ,0 , pending_req); +DID_ERROR <<16 ,0 , pending_req);transport_generic_free_cmd (&pending_req->se_cmd,0 ); }else {scsiback_cmd_exec (pending_req);
@@ -747,7 +747,7 @@ static int scsiback_do_cmd_fn(struct vscsibk_info *info,break ;default :pr_err_ratelimited ("invalid request\n" ); -scsiback_do_resp_with_sense (NULL ,DRIVER_ERROR <<24 ,0 , +scsiback_do_resp_with_sense (NULL ,DID_ERROR <<16 ,0 , pending_req);transport_generic_free_cmd (&pending_req->se_cmd,0 );break ;
Signature · 1 line
2.29.2
PATCH v3 8/40 scsi: introduce scsi_status_is_check_condition()
In reply to Hannes ReineckeAdd a helper function scsi_status_is_check_condition() to encapsulate the frequent checks for SAM_STAT_CHECK_CONDITION.
--- drivers/scsi/ibmvscsi/ibmvscsi.c | 2 +- drivers/scsi/scsi.c | 2 +- drivers/scsi/scsi_error.c | 4 ++-- drivers/scsi/scsi_lib.c | 2 +- include/scsi/scsi.h | 15 +++++++++++++++ 5 files changed, 20 insertions(+), 5 deletions(-)
drivers/scsi/ibmvscsi/ibmvscsi.c +1 -1
@@ -1005,7 +1005,7 @@ static void handle_cmd_rsp(struct srp_event_struct *evt_struct)if (cmnd) { cmnd->result |= rsp->status; -if (((cmnd->result >>1 ) &0x1f ) ==CHECK_CONDITION ) +if (scsi_status_is_check_condition (cmnd->result))memcpy (cmnd->sense_buffer, rsp->data,be32_to_cpu (rsp->sense_data_len));
drivers/scsi/scsi.c +1 -1
@@ -144,7 +144,7 @@ void scsi_log_completion(struct scsi_cmnd *cmd, int disposition) (level > 1)) {scsi_print_result (cmd,"Done" , disposition);scsi_print_command (cmd); -if (status_byte (cmd->result) ==CHECK_CONDITION ) +if (scsi_status_is_check_condition (cmd->result))scsi_print_sense (cmd);if (level >3 ) scmd_printk(KERN_INFO, cmd,
drivers/scsi/scsi_error.c +2 -2
@@ -1258,7 +1258,7 @@ int scsi_eh_get_sense(struct list_head *work_q, current->comm));break ; } -if (status_byte (scmd->result) !=CHECK_CONDITION ) +if (!scsi_status_is_check_condition (scmd->result))/* * don't request sense if there's no check condition * status because the error we're processing isn't one
@@ -1774,7 +1774,7 @@ int scsi_noretry_cmd(struct scsi_cmnd *scmd)return (scmd->request->cmd_flags &REQ_FAILFAST_DRIVER ); } -if (status_byte (scmd->result) !=CHECK_CONDITION ) +if (!scsi_status_is_check_condition (scmd->result))return 0 ; check_type:
drivers/scsi/scsi_lib.c +1 -1
@@ -2206,7 +2206,7 @@ scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage, goto retry; } } -if ((status_byte (result) ==CHECK_CONDITION ) && +if (scsi_status_is_check_condition (result) && sshdr->sense_key ==UNIT_ATTENTION && retry_count) { retry_count--;
include/scsi/scsi.h +15 -0
@@ -58,6 +58,21 @@ static inline int scsi_status_is_good(int status) (status == SAM_STAT_COMMAND_TERMINATED)); } +/** +* scsi_status_is_check_condition - check the status return. +* +* @status: the status passed up from the driver (including host and +* driver components) +* +* This returns true if the status code is SAM_STAT_CHECK_CONDITION. +*/ +static inline int scsi_status_is_check_condition (int status) +{ +if (status <0 ) +return false; + status &=0xfe ; +return status ==SAM_STAT_CHECK_CONDITION ; +}/* * standard mode-select header prepended to all mode-select commands
Signature · 1 line
2.29.2
PATCH v3 9/40 scsi: Kill DRIVER_SENSE
In reply to Hannes ReineckeReplace the check for DRIVER_SENSE with a check for scsi_status_is_check_condition().
And audit all callsites to ensure the SAM status is set correctly. For backwards compability move the DRIVER_SENSE definition to sg.h, and update sg, bsg, and scsi_ioctl to set the DRIVER_SENSE driver_status whenever SAM_STAT_CHECK_CONDITION is present.
--- block/bsg.c | 2 ++ block/scsi_ioctl.c | 2 ++ drivers/ata/libata-scsi.c | 13 ++------ drivers/scsi/NCR5380.c | 2 +- drivers/scsi/advansys.c | 2 -- drivers/scsi/aic7xxx/aic79xx_osm.c | 19 +++++------- drivers/scsi/aic7xxx/aic7xxx_osm.c | 1 - drivers/scsi/arcmsr/arcmsr_hba.c | 1 - drivers/scsi/ch.c | 2 +- drivers/scsi/cxlflash/superpipe.c | 3 +- drivers/scsi/dc395x.c | 13 ++------ drivers/scsi/esp_scsi.c | 4 +-- drivers/scsi/megaraid.c | 8 ++--- drivers/scsi/megaraid/megaraid_mbox.c | 7 ++--- drivers/scsi/megaraid/megaraid_sas_base.c | 2 -- drivers/scsi/megaraid/megaraid_sas_fusion.c | 1 - drivers/scsi/mvumi.c | 1 - drivers/scsi/scsi.c | 7 ----- drivers/scsi/scsi_debug.c | 4 +-- drivers/scsi/scsi_ioctl.c | 3 +- drivers/scsi/scsi_lib.c | 10 ++----- drivers/scsi/scsi_scan.c | 2 +- drivers/scsi/scsi_transport_spi.c | 2 +- drivers/scsi/sd.c | 33 +++++++++++---------- drivers/scsi/sd_zbc.c | 3 +- drivers/scsi/sg.c | 7 +++-- drivers/scsi/stex.c | 4 +-- drivers/scsi/sym53c8xx_2/sym_glue.c | 6 ++-- drivers/scsi/ufs/ufshcd.c | 2 +- drivers/scsi/virtio_scsi.c | 3 +- drivers/scsi/vmw_pvscsi.c | 3 -- drivers/target/loopback/tcm_loop.c | 1 - drivers/usb/storage/cypress_atacb.c | 4 +-- drivers/xen/xen-scsiback.c | 3 +- include/scsi/sg.h | 11 +++++++ 35 files changed, 76 insertions(+), 115 deletions(-)
block/bsg.c +2 -0
@@ -97,6 +97,8 @@ static int bsg_scsi_complete_rq(struct request *rq, struct sg_io_v4 *hdr) hdr->device_status = sreq->result &0xff ; hdr->transport_status =host_byte (sreq->result); hdr->driver_status =driver_byte (sreq->result); +if (scsi_status_is_check_condition (sreq->result)) + hdr->driver_status =DRIVER_SENSE ; hdr->info =0 ;if (hdr->device_status || hdr->transport_status || hdr->driver_status) hdr->info |=SG_INFO_CHECK ;
block/scsi_ioctl.c +2 -0
@@ -257,6 +257,8 @@ static int blk_complete_sghdr_rq(struct request *rq, struct sg_io_hdr *hdr, hdr->msg_status =msg_byte (req->result); hdr->host_status =host_byte (req->result); hdr->driver_status =driver_byte (req->result); +if (scsi_status_is_check_condition (hdr->status)) + hdr->driver_status =DRIVER_SENSE ; hdr->info =0 ;if (hdr->masked_status || hdr->host_status || hdr->driver_status) hdr->info |=SG_INFO_CHECK ;
drivers/ata/libata-scsi.c +3 -10
@@ -411,13 +411,12 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) rc = cmd_result; goto error; } -if (driver_byte (cmd_result) ==DRIVER_SENSE ) {/* sense data available */ +if (scsi_sense_valid (&sshdr)) {/* sense data available */ u8 *desc = sensebuf +8 ; - cmd_result &= ~(0xFF <<24 );/* DRIVER_SENSE is not an error */ /* If we set cc then ATA pass-through will cause a * check condition even if no error. Filter that. */ -if (cmd_result &SAM_STAT_CHECK_CONDITION ) { +if (scsi_status_is_check_condition (cmd_result)) {if (sshdr.sense_key ==RECOVERED_ERROR && sshdr.asc ==0 && sshdr.ascq ==0x1d ) cmd_result &= ~SAM_STAT_CHECK_CONDITION ;
@@ -496,9 +495,8 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) rc = cmd_result; goto error; } -if (driver_byte (cmd_result) ==DRIVER_SENSE ) {/* sense data available */ +if (scsi_sense_valid (&sshdr)) {/* sense data available */ u8 *desc = sensebuf +8 ; - cmd_result &= ~(0xFF <<24 );/* DRIVER_SENSE is not an error */ /* If we set cc then ATA pass-through will cause a * check condition even if no error. Filter that. */
@@ -864,8 +862,6 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)memset (sb,0 ,SCSI_SENSE_BUFFERSIZE ); - cmd->result = (DRIVER_SENSE <<24 ) |SAM_STAT_CHECK_CONDITION ; -/* * Use ata_to_sense_error() to map status register bits * onto sense key, asc & ascq.
@@ -962,8 +958,6 @@ static void ata_gen_ata_sense(struct ata_queued_cmd *qc)memset (sb,0 ,SCSI_SENSE_BUFFERSIZE ); - cmd->result = (DRIVER_SENSE <<24 ) |SAM_STAT_CHECK_CONDITION ; -if (ata_dev_disabled (dev)) {/* Device disabled after error recovery */ /* LOGICAL UNIT NOT READY, HARD RESET REQUIRED */
@@ -4202,7 +4196,6 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd)case REQUEST_SENSE :ata_scsi_set_sense (dev, cmd,0 ,0 ,0 ); - cmd->result = (DRIVER_SENSE <<24 );break ;/* if we reach this, then writeback caching is disabled,
drivers/scsi/NCR5380.c +1 -1
@@ -542,7 +542,7 @@ static void complete_cmd(struct Scsi_Host *instance,scsi_eh_restore_cmnd (cmd, &hostdata->ses); }else {scsi_eh_restore_cmnd (cmd, &hostdata->ses); -set_driver_byte (cmd,DRIVER_SENSE ); +set_status_byte (cmd,SAM_STAT_CHECK_CONDITION ); } hostdata->sensing =NULL ; }
drivers/scsi/advansys.c +0 -2
@@ -6009,7 +6009,6 @@ static void adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp)ASC_DBG (2 ,"SAM_STAT_CHECK_CONDITION\n" );ASC_DBG_PRT_SENSE (2 , scp->sense_buffer,SCSI_SENSE_BUFFERSIZE ); -set_driver_byte (scp,DRIVER_SENSE ); }break ;
@@ -6760,7 +6759,6 @@ static void asc_isr_callback(ASC_DVC_VAR *asc_dvc_varp, ASC_QDONE_INFO *qdonep)ASC_DBG (2 ,"SAM_STAT_CHECK_CONDITION\n" );ASC_DBG_PRT_SENSE (2 , scp->sense_buffer,SCSI_SENSE_BUFFERSIZE ); -set_driver_byte (scp,DRIVER_SENSE ); }break ;
drivers/scsi/aic7xxx/aic79xx_osm.c +7 -12
@@ -1928,7 +1928,7 @@ ahd_linux_handle_scsi_status(struct ahd_softc *ahd,memcpy (cmd->sense_buffer,ahd_get_sense_buf (ahd, scb) + sense_offset, sense_size); - cmd->result |= (DRIVER_SENSE <<24 ); +set_status_byte (cmd,SAM_STAT_CHECK_CONDITION );#ifdef AHD_DEBUG if (ahd_debug &AHD_SHOW_SENSE ) {
@@ -2018,6 +2018,7 @@ ahd_linux_queue_cmd_complete(struct ahd_softc *ahd, struct scsi_cmnd *cmd)int new_status =DID_OK ;int do_fallback =0 ;int scsi_status; +struct scsi_sense_data *sense;/* * Map CAM error codes into Linux Error codes. We
@@ -2041,18 +2042,12 @@ ahd_linux_queue_cmd_complete(struct ahd_softc *ahd, struct scsi_cmnd *cmd)switch (scsi_status) {case SAM_STAT_COMMAND_TERMINATED :case SAM_STAT_CHECK_CONDITION : -if ((cmd->result >>24 ) !=DRIVER_SENSE ) { + sense = (struct scsi_sense_data *) + cmd->sense_buffer; +if (sense->extra_len >=5 && + (sense->add_sense_code ==0x47 + || sense->add_sense_code ==0x48 )) do_fallback =1 ; - }else { -struct scsi_sense_data *sense; - - sense = (struct scsi_sense_data *) - cmd->sense_buffer; -if (sense->extra_len >=5 && - (sense->add_sense_code ==0x47 - || sense->add_sense_code ==0x48 )) - do_fallback =1 ; - }break ;default :break ;
drivers/scsi/aic7xxx/aic7xxx_osm.c +0 -1
@@ -1838,7 +1838,6 @@ ahc_linux_handle_scsi_status(struct ahc_softc *ahc,if (sense_size <SCSI_SENSE_BUFFERSIZE )memset (&cmd->sense_buffer[sense_size],0 ,SCSI_SENSE_BUFFERSIZE - sense_size); - cmd->result |= (DRIVER_SENSE <<24 );#ifdef AHC_DEBUG if (ahc_debug &AHC_SHOW_SENSE ) {int i;
drivers/scsi/arcmsr/arcmsr_hba.c +0 -1
@@ -1335,7 +1335,6 @@ static void arcmsr_report_sense_info(struct CommandControlBlock *ccb)memcpy (sensebuffer, ccb->arcmsr_cdb.SenseData, sense_data_length); sensebuffer->ErrorCode =SCSI_SENSE_CURRENT_ERRORS ; sensebuffer->Valid =1 ; - pcmd->result |= (DRIVER_SENSE <<24 ); } }
drivers/scsi/ch.c +1 -1
@@ -200,7 +200,7 @@ ch_do_scsi(scsi_changer *ch, unsigned char *cmd, int cmd_len, MAX_RETRIES, NULL);if (result <0 )return result; -if (driver_byte (result) ==DRIVER_SENSE ) { +if (scsi_sense_valid (&sshdr)) {if (debug)scsi_print_sense_hdr (ch->device, ch->name, &sshdr); errno =ch_find_errno (&sshdr);
drivers/scsi/cxlflash/superpipe.c +1 -2
@@ -369,8 +369,7 @@ static int read_cap16(struct scsi_device *sdev, struct llun_info *lli) goto out; } -if (result >0 &&driver_byte (result) ==DRIVER_SENSE ) { - result &= ~(0xFF <<24 );/* DRIVER_SENSE is not an error */ +if (result >0 &&scsi_sense_valid (&sshdr)) {if (result &SAM_STAT_CHECK_CONDITION ) {switch (sshdr.sense_key) {case NO_SENSE :
drivers/scsi/dc395x.c +3 -10
@@ -3239,16 +3239,9 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb, }dprintkdbg (DBG_0 ,"srb_done: AUTO_REQSENSE2\n" ); -if (srb->total_xfer_length - && srb->total_xfer_length >= cmd->underflow) - cmd->result = -MK_RES_LNX (DRIVER_SENSE ,DID_OK , - srb->end_message,CHECK_CONDITION ); -/*SET_RES_DID(cmd->result,DID_OK) */ -else - cmd->result = -MK_RES_LNX (DRIVER_SENSE ,DID_OK , - srb->end_message,CHECK_CONDITION ); + cmd->result = +MK_RES (0 ,DID_OK , + srb->end_message,SAM_STAT_CHECK_CONDITION ); goto ckc_e; }
drivers/scsi/esp_scsi.c +1 -3
@@ -922,9 +922,7 @@ static void esp_cmd_is_done(struct esp *esp, struct esp_cmd_entry *ent,* saw originally. Also, report that we are providing * the sense data. */ - cmd->result = ((DRIVER_SENSE <<24 ) | - (DID_OK <<16 ) | - (SAM_STAT_CHECK_CONDITION <<0 )); + cmd->result =SAM_STAT_CHECK_CONDITION ; ent->flags &= ~ESP_CMD_FLAG_AUTOSENSE ;if (esp_debug &ESP_DEBUG_AUTOSENSE ) {
drivers/scsi/megaraid.c +2 -6
@@ -1583,9 +1583,7 @@ mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)memcpy (cmd->sense_buffer, pthru->reqsensearea,14 ); - cmd->result = (DRIVER_SENSE <<24 ) | - (DID_OK <<16 ) | - (CHECK_CONDITION <<1 ); + cmd->result =SAM_STAT_CHECK_CONDITION ; }else {if (mbox->m_out.cmd ==MEGA_MBOXCMD_EXTPTHRU ) {
@@ -1593,9 +1591,7 @@ mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)memcpy (cmd->sense_buffer, epthru->reqsensearea,14 ); - cmd->result = (DRIVER_SENSE <<24 ) | - (DID_OK <<16 ) | - (CHECK_CONDITION <<1 ); + cmd->result =SAM_STAT_CHECK_CONDITION ; }else scsi_build_sense (cmd,0 ,ABORTED_COMMAND ,0 ,0 );
drivers/scsi/megaraid/megaraid_mbox.c +2 -5
@@ -2299,8 +2299,7 @@ megaraid_mbox_dpc(unsigned long devp)memcpy (scp->sense_buffer, pthru->reqsensearea,14 ); - scp->result =DRIVER_SENSE <<24 | -DID_OK <<16 |CHECK_CONDITION <<1 ; + scp->result =SAM_STAT_CHECK_CONDITION ; }else {if (mbox->cmd ==MBOXCMD_EXTPTHRU ) {
@@ -2308,9 +2307,7 @@ megaraid_mbox_dpc(unsigned long devp)memcpy (scp->sense_buffer, epthru->reqsensearea,14 ); - scp->result =DRIVER_SENSE <<24 | -DID_OK <<16 | -CHECK_CONDITION <<1 ; + scp->result =SAM_STAT_CHECK_CONDITION ; }else scsi_build_sense (scp,0 ,ABORTED_COMMAND ,0 ,0 );
drivers/scsi/megaraid/megaraid_sas_base.c +0 -2
@@ -3617,8 +3617,6 @@ megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd, SCSI_SENSE_BUFFERSIZE);memcpy (cmd->scmd->sense_buffer, cmd->sense, hdr->sense_len); - - cmd->scmd->result |=DRIVER_SENSE <<24 ; }break ;
drivers/scsi/megaraid/megaraid_sas_fusion.c +0 -1
@@ -2051,7 +2051,6 @@ map_cmd_status(struct fusion_context *fusion, SCSI_SENSE_BUFFERSIZE);memcpy (scmd->sense_buffer, sense,SCSI_SENSE_BUFFERSIZE ); - scmd->result |=DRIVER_SENSE <<24 ; }/*
drivers/scsi/mvumi.c +0 -1
@@ -1317,7 +1317,6 @@ static void mvumi_complete_cmd(struct mvumi_hba *mhba, struct mvumi_cmd *cmd,if (ob_frame->rsp_flag &CL_RSP_FLAG_SENSEDATA ) {memcpy (cmd->scmd->sense_buffer, ob_frame->payload,sizeof (struct mvumi_sense_data )); - scmd->result |= (DRIVER_SENSE <<24 ); }break ;default :
drivers/scsi/scsi.c +0 -7
@@ -185,13 +185,6 @@ void scsi_finish_command(struct scsi_cmnd *cmd)if (atomic_read (&sdev->device_blocked))atomic_set (&sdev->device_blocked,0 ); -/* -* If we have valid sense information, then some kind of recovery -* must have taken place. Make a note of this. -*/ -if (SCSI_SENSE_VALID (cmd)) - cmd->result |= (DRIVER_SENSE <<24 ); -SCSI_LOG_MLCOMPLETE (4 ,sdev_printk (KERN_INFO , sdev,"Notifying upper driver of completion " "(result %x)\n" , cmd->result));
drivers/scsi/scsi_debug.c +2 -2
@@ -851,10 +851,10 @@ static struct device_driver sdebug_driverfs_driver = { };static const int check_condition_result = - (DRIVER_SENSE <<24 ) |SAM_STAT_CHECK_CONDITION ; +SAM_STAT_CHECK_CONDITION ;static const int illegal_condition_result = - (DRIVER_SENSE <<24 ) | (DID_ABORT <<16 ) |SAM_STAT_CHECK_CONDITION ; + (DID_ABORT <<16 ) |SAM_STAT_CHECK_CONDITION ;static const int device_qfull_result = (DID_OK <<16 ) |SAM_STAT_TASK_SET_FULL ;
drivers/scsi/scsi_ioctl.c +1 -2
@@ -103,8 +103,7 @@ static int ioctl_internal_command(struct scsi_device *sdev, char *cmd,if (result <0 ) goto out; -if (driver_byte (result) ==DRIVER_SENSE && -scsi_sense_valid (&sshdr)) { +if (scsi_sense_valid (&sshdr)) {switch (sshdr.sense_key) {case ILLEGAL_REQUEST :if (cmd[0 ] ==ALLOW_MEDIUM_REMOVAL )
drivers/scsi/scsi_lib.c +3 -7
@@ -627,8 +627,6 @@ static blk_status_t scsi_result_to_blk_status(struct scsi_cmnd *cmd, int result)case DID_OK :/* * Also check the other bytes than the status byte in result -* to handle the case when a SCSI LLD sets result to -* DRIVER_SENSE << 24 without setting SAM_STAT_CHECK_CONDITION. */ if (scsi_status_is_good (result) && (result & ~0xff ) ==0 )return BLK_STS_OK ;
@@ -824,7 +822,7 @@ static void scsi_io_completion_action(struct scsi_cmnd *cmd, int result)*/ if (!level &&__ratelimit (&_rs)) {scsi_print_result (cmd,NULL ,FAILED ); -if (driver_byte (result) ==DRIVER_SENSE ) +if (sense_valid)scsi_print_sense (cmd);scsi_print_command (cmd); }
@@ -2194,8 +2192,7 @@ scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,* ILLEGAL REQUEST if the code page isn't supported */ if (!scsi_status_is_good (result)) { -if (driver_byte (result) ==DRIVER_SENSE && -scsi_sense_valid (sshdr)) { +if (scsi_sense_valid (sshdr)) {if ((sshdr->sense_key ==ILLEGAL_REQUEST ) && (sshdr->asc ==0x20 ) && (sshdr->ascq ==0 )) {/*
@@ -3278,7 +3275,6 @@ EXPORT_SYMBOL(scsi_vpd_tpg_id);void scsi_build_sense (struct scsi_cmnd *scmd,int desc,u8 key,u8 asc,u8 ascq) {scsi_build_sense_buffer (desc, scmd->sense_buffer, key, asc, ascq); - scmd->result = (DRIVER_SENSE <<24 ) | (DID_OK <<16 ) | -SAM_STAT_CHECK_CONDITION ; + scmd->result =SAM_STAT_CHECK_CONDITION ; }EXPORT_SYMBOL_GPL (scsi_build_sense);
drivers/scsi/scsi_scan.c +1 -1
@@ -623,7 +623,7 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,* INQUIRY should not yield UNIT_ATTENTION * but many buggy devices do so anyway. */ -if (driver_byte (result) ==DRIVER_SENSE && +if (scsi_status_is_check_condition (result) &&scsi_sense_valid (&sshdr)) { if ((sshdr.sense_key == UNIT_ATTENTION) && ((sshdr.asc == 0x28) ||
drivers/scsi/scsi_transport_spi.c +1 -1
@@ -127,7 +127,7 @@ static int spi_execute(struct scsi_device *sdev, const void *cmd,REQ_FAILFAST_TRANSPORT |REQ_FAILFAST_DRIVER , RQF_PM, NULL); -if (result <0 ||driver_byte (result) !=DRIVER_SENSE || +if (result <0 || !scsi_sense_valid (sshdr) || sshdr->sense_key !=UNIT_ATTENTION )break ; }
drivers/scsi/sd.c +17 -16
@@ -1722,16 +1722,17 @@ static int sd_sync_cache(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr)if (res <0 )return res; -if (driver_byte (res) ==DRIVER_SENSE ) +if (scsi_status_is_check_condition (res) && +scsi_sense_valid (sshdr)) {sd_print_sense_hdr (sdkp, sshdr); -/* we need to evaluate the error return */ -if (scsi_sense_valid (sshdr) && - (sshdr->asc ==0x3a ||/* medium not present */ - sshdr->asc ==0x20 ||/* invalid command */ - (sshdr->asc ==0x74 && sshdr->ascq ==0x71 )))/* drive is password locked */ +/* we need to evaluate the error return */ +if (sshdr->asc ==0x3a ||/* medium not present */ + sshdr->asc ==0x20 ||/* invalid command */ + (sshdr->asc ==0x74 && sshdr->ascq ==0x71 ))/* drive is password locked */ /* this is no error here */ return 0 ; + }switch (host_byte (res)) {/* ignore errors due to racing a disconnection */
@@ -1828,7 +1829,7 @@ static int sd_pr_command(struct block_device *bdev, u8 sa, result =scsi_execute_req (sdev, cmd,DMA_TO_DEVICE , &data,sizeof (data), &sshdr,SD_TIMEOUT , sdkp->max_retries,NULL ); -if (result >0 &&driver_byte (result) ==DRIVER_SENSE && +if (scsi_status_is_check_condition (result) &&scsi_sense_valid (&sshdr)) {sdev_printk (KERN_INFO , sdev,"PR command failed: %d\n" , result);scsi_print_sense_hdr (sdev,NULL , &sshdr);
@@ -2072,7 +2073,7 @@ static int sd_done(struct scsi_cmnd *SCpnt) } sdkp->medium_access_timed_out =0 ; -if (driver_byte (result) !=DRIVER_SENSE && +if (!scsi_status_is_check_condition (result) && (!sense_valid || sense_deferred)) goto out;
@@ -2175,12 +2176,12 @@ sd_spinup_disk(struct scsi_disk *sdkp)if (the_result) sense_valid =scsi_sense_valid (&sshdr); retries++; - }while (retries <3 && + }while (retries <3 && (!scsi_status_is_good (the_result) || - ((driver_byte (the_result) ==DRIVER_SENSE ) && + (scsi_status_is_check_condition (the_result) && sense_valid && sshdr.sense_key ==UNIT_ATTENTION ))); -if (the_result <0 ||driver_byte (the_result) !=DRIVER_SENSE ) { +if (!scsi_status_is_check_condition (the_result)) {/* no sense, TUR either succeeded or failed * with a status error */ if (!spintime && !scsi_status_is_good (the_result)) {
@@ -2308,7 +2309,7 @@ static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp, struct scsi_sense_hdr *sshdr, int sense_valid, int the_result) { - if (driver_byte(the_result) == DRIVER_SENSE) + if (sense_valid) sd_print_sense_hdr(sdkp, sshdr); else sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n");
@@ -3594,12 +3595,12 @@ static int sd_start_stop_device(struct scsi_disk *sdkp, int start) SD_TIMEOUT, sdkp->max_retries, 0, RQF_PM, NULL);if (res) {sd_print_result (sdkp,"Start/Stop Unit failed" , res); -if (res >0 &&driver_byte (res) ==DRIVER_SENSE ) +if (res >0 &&scsi_sense_valid (&sshdr)) {sd_print_sense_hdr (sdkp, &sshdr); -if (scsi_sense_valid (&sshdr) &&/* 0x3a is medium not present */ - sshdr.asc ==0x3a ) - res =0 ; +if (sshdr.asc ==0x3a ) + res =0 ; + } }/* SCSI error codes must not go to the generic layer */
drivers/scsi/sd_zbc.c +1 -2
@@ -116,8 +116,7 @@ static int sd_zbc_do_report_zones(struct scsi_disk *sdkp, unsigned char *buf,sd_printk (KERN_ERR , sdkp,"REPORT ZONES start lba %llu failed\n" , lba);sd_print_result (sdkp,"REPORT ZONES" , result); -if (result >0 &&driver_byte (result) ==DRIVER_SENSE && -scsi_sense_valid (&sshdr)) +if (result >0 &&scsi_sense_valid (&sshdr))sd_print_sense_hdr (sdkp, &sshdr);return -EIO ; }
drivers/scsi/sg.c +5 -2
@@ -498,9 +498,11 @@ sg_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos) old_hdr->host_status = hp->host_status; old_hdr->driver_status = hp->driver_status;if ((CHECK_CONDITION & hp->masked_status) || - (DRIVER_SENSE & hp->driver_status)) + (srp->sense_b && (srp->sense_b[0 ] &0x70 ) ==0x70 )) { + old_hdr->driver_status =DRIVER_SENSE ;memcpy (old_hdr->sense_buffer, srp->sense_b,sizeof (old_hdr->sense_buffer)); + }switch (hp->host_status) {/* This setup of 'result' is for backward compatibility and is best ignored by the user who should use target, host + driver status */
@@ -574,7 +576,7 @@ sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp) hp->sb_len_wr =0 ;if ((hp->mx_sb_len >0 ) && hp->sbp) {if ((CHECK_CONDITION & hp->masked_status) || - (DRIVER_SENSE & hp->driver_status)) { + (srp->sense_b && (srp->sense_b[0 ] &0x70 ) ==0x70 )) {int sb_len =SCSI_SENSE_BUFFERSIZE ; sb_len = (hp->mx_sb_len > sb_len) ? sb_len : hp->mx_sb_len; len =8 + (int ) srp->sense_b[7 ];/* Additional sense length field */
@@ -583,6 +585,7 @@ sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp) err = -EFAULT ; goto err_out; } + hp->driver_status =DRIVER_SENSE ; hp->sb_len_wr = len; } }
drivers/scsi/stex.c +2 -2
@@ -737,7 +737,7 @@ static void stex_scsi_done(struct st_ccb *ccb) result |=DID_OK <<16 ;break ;case SAM_STAT_CHECK_CONDITION : - result |=DRIVER_SENSE <<24 ; + result |=DID_OK <<16 ;break ;case SAM_STAT_BUSY : result |=DID_BUS_BUSY <<16 ;
@@ -748,7 +748,7 @@ static void stex_scsi_done(struct st_ccb *ccb) } }else if (ccb->srb_status &SRB_SEE_SENSE ) - result =DRIVER_SENSE <<24 |SAM_STAT_CHECK_CONDITION ; + result =SAM_STAT_CHECK_CONDITION ;else switch (ccb->srb_status) {case SRB_STATUS_SELECTION_TIMEOUT : result =DID_NO_CONNECT <<16 ;
drivers/scsi/sym53c8xx_2/sym_glue.c +2 -4
@@ -170,9 +170,8 @@ static int sym_xerr_cam_status(int cam_status, int x_status)void sym_set_cam_result_error (struct sym_hcb *np,struct sym_ccb *cp,int resid) {struct scsi_cmnd *cmd = cp->cmd; -u_int cam_status, scsi_status, drv_status; +u_int cam_status, scsi_status; - drv_status =0 ; cam_status =DID_OK ; scsi_status = cp->ssss_status;
@@ -186,7 +185,6 @@ void sym_set_cam_result_error(struct sym_hcb *np, struct sym_ccb *cp, int resid) cp->xerr_status == 0) { cam_status =sym_xerr_cam_status (DID_OK , cp->sv_xerr_status); - drv_status =DRIVER_SENSE ;/* * Bounce back the sense data to user. */
@@ -235,7 +233,7 @@ void sym_set_cam_result_error(struct sym_hcb *np, struct sym_ccb *cp, int resid) cam_status =sym_xerr_cam_status (DID_ERROR , cp->xerr_status); }scsi_set_resid (cmd, resid); - cmd->result = (drv_status <<24 ) | (cam_status <<16 ) | scsi_status; + cmd->result = (cam_status <<16 ) | scsi_status; }static int sym_scatter (struct sym_hcb *np,struct sym_ccb *cp,struct scsi_cmnd *cmd)
drivers/scsi/ufs/ufshcd.c +1 -1
@@ -8487,7 +8487,7 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,sdev_printk (KERN_WARNING , sdp,"START_STOP failed for power mode: %d, result %x\n" , pwr_mode, ret); -if (ret >0 &&driver_byte (ret) ==DRIVER_SENSE ) +if (ret >0 &&scsi_sense_valid (&sshdr))scsi_print_sense_hdr (sdp,NULL , &sshdr); }
drivers/scsi/virtio_scsi.c +1 -2
@@ -161,8 +161,7 @@ static void virtscsi_complete_cmd(struct virtio_scsi *vscsi, void *buf)min_t (u32,virtio32_to_cpu (vscsi->vdev, resp->sense_len), VIRTIO_SCSI_SENSE_SIZE)); -if (resp->sense_len) -set_driver_byte (sc,DRIVER_SENSE ); +set_status_byte (sc,SAM_STAT_CHECK_CONDITION ); } sc->scsi_done (sc);
drivers/scsi/vmw_pvscsi.c +0 -3
@@ -576,9 +576,6 @@ static void pvscsi_complete_request(struct pvscsi_adapter *adapter, cmd->result = (DID_RESET <<16 ); }else { cmd->result = (DID_OK <<16 ) | sdstat; -if (sdstat ==SAM_STAT_CHECK_CONDITION && - cmd->sense_buffer) - cmd->result |= (DRIVER_SENSE <<24 ); } }else switch (btstat) {
drivers/target/loopback/tcm_loop.c +0 -1
@@ -566,7 +566,6 @@ static int tcm_loop_queue_data_or_status(const char *func,memcpy (sc->sense_buffer, se_cmd->sense_buffer,SCSI_SENSE_BUFFERSIZE ); sc->result =SAM_STAT_CHECK_CONDITION ; -set_driver_byte (sc,DRIVER_SENSE ); }else sc->result = scsi_status;
drivers/usb/storage/cypress_atacb.c +2 -2
@@ -221,11 +221,11 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) desc[12 ] = regs[6 ];/* device */ desc[13 ] = regs[7 ];/* command */ - srb->result = (DRIVER_SENSE <<24 ) |SAM_STAT_CHECK_CONDITION ; + srb->result =SAM_STAT_CHECK_CONDITION ; } goto end; invalid_fld: - srb->result = (DRIVER_SENSE <<24 ) |SAM_STAT_CHECK_CONDITION ; + srb->result =SAM_STAT_CHECK_CONDITION ; memcpy(srb->sense_buffer, usb_stor_sense_invalidCDB,
drivers/xen/xen-scsiback.c +1 -2
@@ -1401,8 +1401,7 @@ static int scsiback_queue_status(struct se_cmd *se_cmd)if (se_cmd->sense_buffer && ((se_cmd->se_cmd_flags &SCF_TRANSPORT_TASK_SENSE ) || (se_cmd->se_cmd_flags &SCF_EMULATED_TASK_SENSE ))) - pending_req->result = (DRIVER_SENSE <<24 ) | -SAM_STAT_CHECK_CONDITION ; + pending_req->result =SAM_STAT_CHECK_CONDITION ;else pending_req->result = se_cmd->scsi_status;
include/scsi/sg.h +11 -0
@@ -131,6 +131,17 @@ struct compat_sg_io_hdr {#define SG_INFO_DIRECT_IO 0x2/* direct IO requested and performed */ #define SG_INFO_MIXED_IO 0x4/* part direct, part indirect IO */ +/* +* Obsolete DRIVER_SENSE driver byte +* +* Originally the SCSI midlayer would set the DRIVER_SENSE driver byte when +* a sense code was generated and a sense buffer was allocated. +* However, as nowadays every scsi command has a sense code allocated this +* distinction became moot as one could check the sense buffer directly. +* Consequently this byte is not set anymore from the midlayer, but SG will +* keep setting this byte to be compatible with previous releases. +*/ +#define DRIVER_SENSE 0x08 typedef struct sg_scsi_id { /* used by SG_GET_SCSI_ID ioctl() */ int host_no; /* as in "scsi<n>" where 'n' is one of 0, 1, 2 etc */
Signature · 1 line
2.29.2
PATCH v3 13/40 xen-scsifront: compability status handling
In reply to Hannes ReineckeThe Xen guest might run against arbitrary backends, so the driver might receive a status with driver_byte set. Map these errors to DID_ERROR to be consistent with recent changes.
--- drivers/scsi/xen-scsifront.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/scsi/xen-scsifront.c +7 -1
@@ -251,6 +251,7 @@ static void scsifront_cdb_cmd_done(struct vscsifrnt_info *info,struct scsi_cmnd *sc;uint32_t id;uint8_t sense_len; +int result; id = ring_rsp->rqid; shadow = info->shadow[id];
@@ -261,7 +262,12 @@ static void scsifront_cdb_cmd_done(struct vscsifrnt_info *info,scsifront_gnttab_done (info, shadow);scsifront_put_rqid (info, id); - sc->result = ring_rsp->rslt; + result = ring_rsp->rslt; +if (result >>24 ) +set_host_byte (sc,DID_ERROR ); +else +set_host_byte (sc,host_byte (result)); +set_status_byte (sc, result &0xff );scsi_set_resid (sc, ring_rsp->residual_len); sense_len = min_t(uint8_t, VSCSIIF_SENSE_BUFFERSIZE,
Signature · 1 line
2.29.2
PATCH v3 14/40 scsi: Drop the now obsolete driver_byte definitions
In reply to Hannes ReineckeFrom: Hannes Reinecke <[email protected]>
The driver_byte field in the result is now unused, so we can drop the definitions.
--- Documentation/scsi/scsi_mid_low_api.rst | 3 +-- block/bsg-lib.c | 2 +- block/bsg.c | 2 +- block/scsi_ioctl.c | 2 +- drivers/scsi/constants.c | 15 --------------- drivers/scsi/scsi_logging.c | 10 ++-------- drivers/scsi/sd.c | 9 ++++----- drivers/scsi/sr.c | 2 +- drivers/scsi/sr_ioctl.c | 2 +- drivers/scsi/st.c | 4 ++-- drivers/xen/xen-scsiback.c | 4 ++-- include/scsi/scsi.h | 16 ---------------- include/scsi/scsi_cmnd.h | 4 ---- include/scsi/sg.h | 2 ++ include/trace/events/scsi.h | 15 +-------------- 15 files changed, 19 insertions(+), 73 deletions(-)
Documentation/scsi/scsi_mid_low_api.rst +1 -2
@@ -1178,8 +1178,7 @@ Members of interest: target device). 'result' is a 32 bit unsigned integer that can be viewed as 4 related bytes. The SCSI status value is in the LSB. See include/scsi/scsi.h status_byte(), - msg_byte(), host_byte() and driver_byte() macros and - related constants. + msg_byte() and host_byte() macros and related constants. sense_buffer - an array (maximum size: SCSI_SENSE_BUFFERSIZE bytes) that should be written when the SCSI status (LSB of 'result')
block/bsg-lib.c +1 -1
@@ -84,7 +84,7 @@ static int bsg_transport_complete_rq(struct request *rq, struct sg_io_v4 *hdr)*/ hdr->device_status = job->result &0xff ; hdr->transport_status =host_byte (job->result); - hdr->driver_status =driver_byte (job->result); + hdr->driver_status =0 ; hdr->info =0 ;if (hdr->device_status || hdr->transport_status || hdr->driver_status) hdr->info |=SG_INFO_CHECK ;
block/bsg.c +1 -1
@@ -96,7 +96,7 @@ static int bsg_scsi_complete_rq(struct request *rq, struct sg_io_v4 *hdr)*/ hdr->device_status = sreq->result &0xff ; hdr->transport_status =host_byte (sreq->result); - hdr->driver_status =driver_byte (sreq->result); + hdr->driver_status =0 ;if (scsi_status_is_check_condition (sreq->result)) hdr->driver_status =DRIVER_SENSE ; hdr->info =0 ;
block/scsi_ioctl.c +1 -1
@@ -256,7 +256,7 @@ static int blk_complete_sghdr_rq(struct request *rq, struct sg_io_hdr *hdr, hdr->masked_status =status_byte (req->result); hdr->msg_status =msg_byte (req->result); hdr->host_status =host_byte (req->result); - hdr->driver_status =driver_byte (req->result); + hdr->driver_status =0 ;if (scsi_status_is_check_condition (hdr->status)) hdr->driver_status =DRIVER_SENSE ; hdr->info =0 ;
drivers/scsi/constants.c +0 -15
@@ -406,10 +406,6 @@ static const char * const hostbyte_table[]={"DID_TRANSPORT_DISRUPTED" ,"DID_TRANSPORT_FAILFAST" ,"DID_TARGET_FAILURE" , "DID_NEXUS_FAILURE", "DID_ALLOC_FAILURE", "DID_MEDIUM_ERROR" }; -static const char *const driverbyte_table[]={ -"DRIVER_OK" ,"DRIVER_BUSY" ,"DRIVER_SOFT" ,"DRIVER_MEDIA" ,"DRIVER_ERROR" , -"DRIVER_INVALID" ,"DRIVER_TIMEOUT" ,"DRIVER_HARD" ,"DRIVER_SENSE" }; -const char *scsi_hostbyte_string (int result) {const char *hb_string =NULL ;
@@ -421,17 +417,6 @@ const char *scsi_hostbyte_string(int result) }EXPORT_SYMBOL (scsi_hostbyte_string); -const char *scsi_driverbyte_string (int result) -{ -const char *db_string =NULL ; -int db =driver_byte (result); - -if (db <ARRAY_SIZE (driverbyte_table)) - db_string = driverbyte_table[db]; -return db_string; -} -EXPORT_SYMBOL (scsi_driverbyte_string); -#define scsi_mlreturn_name (result) { result, #result }static const struct value_name_pair scsi_mlreturn_arr[] = {scsi_mlreturn_name (NEEDS_RETRY ),
drivers/scsi/scsi_logging.c +2 -8
@@ -385,7 +385,6 @@ void scsi_print_result(const struct scsi_cmnd *cmd, const char *msg,size_t off, logbuf_len;const char *mlret_string =scsi_mlreturn_string (disposition);const char *hb_string =scsi_hostbyte_string (cmd->result); -const char *db_string =scsi_driverbyte_string (cmd->result);unsigned long cmd_age = (jiffies - cmd->jiffies_at_alloc) /HZ ; logbuf =scsi_log_reserve_buffer (&logbuf_len);
@@ -426,13 +425,8 @@ void scsi_print_result(const struct scsi_cmnd *cmd, const char *msg,if (WARN_ON (off >= logbuf_len)) goto out_printk; -if (db_string) - off +=scnprintf (logbuf + off, logbuf_len - off, -"driverbyte=%s " , db_string); -else - off +=scnprintf (logbuf + off, logbuf_len - off, -"driverbyte=0x%02x " , -driver_byte (cmd->result)); + off +=scnprintf (logbuf + off, logbuf_len - off, +"driverbyte=DRIVER_OK " ); off +=scnprintf (logbuf + off, logbuf_len - off,"cmd_age=%lus" , cmd_age);
drivers/scsi/sd.c +4 -5
@@ -3810,15 +3810,14 @@ void sd_print_sense_hdr(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr)void sd_print_result (const struct scsi_disk *sdkp,const char *msg,int result) {const char *hb_string =scsi_hostbyte_string (result); -const char *db_string =scsi_driverbyte_string (result); -if (hb_string || db_string) +if (hb_string)sd_printk (KERN_INFO , sdkp,"%s: Result: hostbyte=%s driverbyte=%s\n" , msg, hb_string ? hb_string :"invalid" , - db_string ? db_string :"invalid" ); +"DRIVER_OK" );else sd_printk (KERN_INFO , sdkp, -"%s: Result: hostbyte=0x%02x driverbyte=0x%02x\n" , - msg,host_byte (result),driver_byte (result)); +"%s: Result: hostbyte=0x%02x driverbyte=%s\n" , + msg,host_byte (result),"DRIVER_OK" ); }
drivers/scsi/sr.c +1 -1
@@ -338,7 +338,7 @@ static int sr_done(struct scsi_cmnd *SCpnt)* care is taken to avoid unnecessary additional work such as * memcpy's that could be avoided. */ -if (driver_byte (result) !=0 &&/* An error occurred */ +if (status_byte (result) ==SAM_STAT_CHECK_CONDITION && (SCpnt->sense_buffer[0 ] &0x7f ) ==0x70 ) {/* Sense current */ switch (SCpnt->sense_buffer[2 ]) {case MEDIUM_ERROR :
drivers/scsi/sr_ioctl.c +1 -1
@@ -209,7 +209,7 @@ int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc) err = result; goto out; } -if (driver_byte (result) !=0 ) { +if (status_byte (result) ==SAM_STAT_CHECK_CONDITION ) {switch (sshdr->sense_key) {case UNIT_ATTENTION : SDev->changed =1 ;
drivers/scsi/st.c +2 -2
@@ -390,8 +390,8 @@ static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt)if (!debugging) {/* Abnormal conditions for tape */ if (!cmdstatp->have_sense)st_printk (KERN_WARNING , STp, -"Error %x (driver bt 0x%x, host bt 0x%x).\n" , - result,driver_byte (result),host_byte (result)); +"Error %x (driver bt 0, host bt 0x%x).\n" , + result,host_byte (result)); else if (cmdstatp->have_sense && scode != NO_SENSE && scode != RECOVERED_ERROR &&
drivers/xen/xen-scsiback.c +2 -2
@@ -222,10 +222,10 @@ static void scsiback_print_status(char *sense_buffer, int errors, {struct scsiback_tpg *tpg = pending_req->v2p->tpg; -pr_err ("[%s:%d] cmnd[0]=%02x -> st=%02x msg=%02x host=%02x drv=%02x\n" , +pr_err ("[%s:%d] cmnd[0]=%02x -> st=%02x msg=%02x host=%02x\n" , tpg->tport->tport_name, pending_req->v2p->lun, pending_req->cmnd[0 ],status_byte (errors),msg_byte (errors), -host_byte (errors),driver_byte (errors)); +host_byte (errors)); }static void scsiback_fast_flush_area (struct vscsibk_pend *req)
include/scsi/scsi.h +0 -16
@@ -181,20 +181,6 @@ static inline int scsi_is_wlun(u64 lun)#define DID_TRANSPORT_MARGINAL 0x14/* Transport marginal errors */ #define DRIVER_OK 0x00/* Driver status */ -/* -* These indicate the error that occurred, and what is available. -*/ - -#define DRIVER_BUSY 0x01 -#define DRIVER_SOFT 0x02 -#define DRIVER_MEDIA 0x03 -#define DRIVER_ERROR 0x04 - -#define DRIVER_INVALID 0x05 -#define DRIVER_TIMEOUT 0x06 -#define DRIVER_HARD 0x07 -#define DRIVER_SENSE 0x08 -/* * Internal return values. */
@@ -226,12 +212,10 @@ enum scsi_disposition {* status byte = set from target device * msg_byte = return status from host adapter itself. * host_byte = set by low-level driver to indicate status. -* driver_byte = set by mid-level. */ #define status_byte (result) (((result) >> 1) & 0x7f)#define msg_byte (result) (((result) >> 8) & 0xff)#define host_byte (result) (((result) >> 16) & 0xff) -#define driver_byte (result) (((result) >> 24) & 0xff)#define sense_class (sense) (((sense) >> 4) & 0x7)#define sense_error (sense) ((sense) & 0xf)
include/scsi/scsi_cmnd.h +0 -4
@@ -326,10 +326,6 @@ static inline void set_host_byte(struct scsi_cmnd *cmd, char status) cmd->result = (cmd->result &0xff00ffff ) | (status <<16 ); } -static inline void set_driver_byte (struct scsi_cmnd *cmd,char status) -{ - cmd->result = (cmd->result &0x00ffffff ) | (status <<24 ); -}static inline unsigned scsi_transfer_length (struct scsi_cmnd *scmd) {
include/scsi/sg.h +2 -0
@@ -142,6 +142,8 @@ struct compat_sg_io_hdr {* keep setting this byte to be compatible with previous releases. */ #define DRIVER_SENSE 0x08 +/* Obsolete driver_byte() declaration */ +#define driver_byte (result) (((result) >> 24) & 0xff) typedef struct sg_scsi_id { /* used by SG_GET_SCSI_ID ioctl() */ int host_no; /* as in "scsi<n>" where 'n' is one of 0, 1, 2 etc */
include/trace/events/scsi.h +1 -14
@@ -124,19 +124,6 @@ scsi_hostbyte_name(DID_TRANSPORT_DISRUPTED), \ scsi_hostbyte_name(DID_TRANSPORT_FAILFAST)) -#define scsi_driverbyte_name (result) { result, #result } -#define show_driverbyte_name (val) \ - __print_symbolic(val, \ - scsi_driverbyte_name(DRIVER_OK), \ - scsi_driverbyte_name(DRIVER_BUSY), \ - scsi_driverbyte_name(DRIVER_SOFT), \ - scsi_driverbyte_name(DRIVER_MEDIA), \ - scsi_driverbyte_name(DRIVER_ERROR), \ - scsi_driverbyte_name(DRIVER_INVALID), \ - scsi_driverbyte_name(DRIVER_TIMEOUT), \ - scsi_driverbyte_name(DRIVER_HARD), \ - scsi_driverbyte_name(DRIVER_SENSE)) -#define scsi_msgbyte_name (result) { result, #result }#define show_msgbyte_name (val) \ __print_symbolic(val, \
@@ -327,7 +314,7 @@ DECLARE_EVENT_CLASS(scsi_cmd_done_timeout_template,show_opcode_name (__entry->opcode),__parse_cdb (__get_dynamic_array (cmnd), __entry->cmd_len),__print_hex (__get_dynamic_array (cmnd), __entry->cmd_len), -show_driverbyte_name (((__entry->result) >>24 ) &0xff ), +"DRIVER_OK" ,show_hostbyte_name (((__entry->result) >>16 ) &0xff ),show_msgbyte_name (((__entry->result) >>8 ) &0xff ), show_statusbyte_name(__entry->result & 0xff))
Signature · 1 line
2.29.2
PATCH v3 20/40 qlogicfas408: make ql_pcmd() a void function
In reply to Hannes ReineckeMake ql_pcmd() a void function and set the SCSI result directly.
--- drivers/scsi/qlogicfas408.c | 75 ++++++++++++++++++++++++------------- 1 file changed, 49 insertions(+), 26 deletions(-)
drivers/scsi/qlogicfas408.c +49 -26
@@ -256,7 +256,7 @@ static void ql_icmd(struct scsi_cmnd *cmd)* Process scsi command - usually after interrupt */ -static unsigned int ql_pcmd (struct scsi_cmnd *cmd) +static void ql_pcmd (struct scsi_cmnd *cmd) {unsigned int i, j;unsigned long k;
@@ -274,13 +274,15 @@ static unsigned int ql_pcmd(struct scsi_cmnd *cmd) j =inb (qbase +6 ); i =inb (qbase +5 );if (i ==0x20 ) { -return (DID_NO_CONNECT <<16 ); +set_host_byte (cmd,DID_NO_CONNECT ); +return ; } i |=inb (qbase +5 );/* the 0x10 bit can be set after the 0x08 */ if (i !=0x18 ) {printk (KERN_ERR "Ql:Bad Interrupt status:%02x\n" , i);ql_zap (priv); -return (DID_BAD_INTR <<16 ); +set_host_byte (cmd,DID_BAD_INTR ); +return ; } j &=7 ;/* j = inb( qbase + 7 ) >> 5; */
@@ -293,9 +295,10 @@ static unsigned int ql_pcmd(struct scsi_cmnd *cmd)printk (KERN_ERR "Ql:Bad sequence for command %d, int %02X, cmdleft = %d\n" , j, i,inb (qbase +7 ) &0x1f );ql_zap (priv); -return (DID_ERROR <<16 ); +set_host_byte (cmd,DID_ERROR ); +return ; } - result =DID_OK ; +if (inb (qbase +7 ) &0x1f )/* if some bytes in fifo */ outb (1 , qbase +3 );/* clear fifo */ /* note that request_bufflen is the total xfer size when sg is used */
@@ -314,21 +317,24 @@ static unsigned int ql_pcmd(struct scsi_cmnd *cmd)scsi_for_each_sg (cmd, sg,scsi_sg_count (cmd), i) {if (priv->qabort) {REG0 ; -return ((priv->qabort ==1 ? -DID_ABORT :DID_RESET ) <<16 ); +set_host_byte (cmd, + priv->qabort ==1 ? +DID_ABORT :DID_RESET ); } buf =sg_virt (sg);if (ql_pdma (priv, phase, buf, sg->length))break ; }REG0 ; -rtrc (2 ) +rtrc (2 );/* * Wait for irq (split into second state of irq handler * if this can take time) */ -if ((k =ql_wai (priv))) -return (k <<16 ); +if ((k =ql_wai (priv))) { +set_host_byte (cmd, k); +return ; + } k =inb (qbase +5 );/* should be 0x10, bus service */ }
@@ -344,19 +350,25 @@ static unsigned int ql_pcmd(struct scsi_cmnd *cmd)if (time_after_eq (jiffies, k)) {ql_zap (priv); -return (DID_TIME_OUT <<16 ); +set_host_byte (cmd,DID_TIME_OUT ); +return ; }/* FIXME: timeout ?? */ while (inb (qbase +5 ))cpu_relax ();/* clear pending ints */ -if (priv->qabort) -return ((priv->qabort ==1 ?DID_ABORT :DID_RESET ) <<16 ); +if (priv->qabort) { +set_host_byte (cmd, + priv->qabort ==1 ?DID_ABORT :DID_RESET ); +return ; + }outb (0x11 , qbase +3 );/* get status and message */ -if ((k =ql_wai (priv))) -return (k <<16 ); +if ((k =ql_wai (priv))) { +set_host_byte (cmd, k); +return ; + } i =inb (qbase +5 );/* get chip irq stat */ j =inb (qbase +7 ) &0x1f ;/* and bytes rec'd */ status =inb (qbase +2 );
@@ -368,12 +380,14 @@ static unsigned int ql_pcmd(struct scsi_cmnd *cmd)*/ if (!((i ==8 && j ==2 ) || (i ==0x10 && j ==1 ))) {printk (KERN_ERR "Ql:Error during status phase, int=%02X, %d bytes recd\n" , i, j); - result =DID_ERROR ; +set_host_byte (cmd,DID_ERROR ); }outb (0x12 , qbase +3 );/* done, disconnect */ - rtrc(1) -if ((k =ql_wai (priv))) -return (k <<16 ); +rtrc (1 ); +if ((k =ql_wai (priv))) { +set_host_byte (cmd, k); +return ; + }/* * Should get bus service interrupt and disconnect interrupt
@@ -385,12 +399,18 @@ static unsigned int ql_pcmd(struct scsi_cmnd *cmd)cpu_relax (); i |=inb (qbase +5 ); } - rtrc(0) +rtrc (0 ); -if (priv->qabort) -return ((priv->qabort ==1 ?DID_ABORT :DID_RESET ) <<16 ); - -return (result <<16 ) | (message <<8 ) | (status &STATUS_MASK ); +if (priv->qabort) { +set_host_byte (cmd, + priv->qabort ==1 ?DID_ABORT :DID_RESET ); +return ; + } + +set_host_byte (cmd, result); +set_msg_byte (cmd, message); +set_status_byte (cmd, status); +return ; }/*
@@ -415,7 +435,7 @@ static void ql_ihandl(void *dev_id)return ; } icmd = priv->qlcmd; - icmd->result =ql_pcmd (icmd); +ql_pcmd (icmd); priv->qlcmd =NULL ;/* * If result is CHECK CONDITION done calls qcommand to request
@@ -443,8 +463,11 @@ static int qlogicfas408_queuecommand_lck(struct scsi_cmnd *cmd, void (*done) (struct scsi_cmnd *)) {struct qlogicfas408_priv *priv =get_priv_by_cmd (cmd); + +set_host_byte (cmd,DID_OK ); +set_status_byte (cmd,SAM_STAT_GOOD );if (scmd_id (cmd) == priv->qinitid) { - cmd->result =DID_BAD_TARGET <<16 ; +set_host_byte (cmd,DID_BAD_TARGET );done (cmd);return 0 ; }
Signature · 1 line
2.29.2
PATCH v3 11/40 scsi_error: use DID_TIME_OUT instead of DRIVER_TIMEOUT
In reply to Hannes ReineckeSet DID_TIME_OUT instead of DRIVER_TIMEOUT when a command is finally marked as failed after error recovery.
--- drivers/scsi/scsi_error.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/scsi_error.c +2 -2
@@ -2137,10 +2137,10 @@ void scsi_eh_flush_done_q(struct list_head *done_q)/* * If just we got sense for the device (called * scsi_eh_get_sense), scmd->result is already -* set, do not set DRIVER_TIMEOUT. +* set, do not set DID_TIME_OUT. */ if (!scmd->result) - scmd->result |= (DRIVER_TIMEOUT <<24 ); + scmd->result |= (DID_TIME_OUT <<16 ); SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd, "%s: flush finish cmd\n",
Signature · 1 line
2.29.2
PATCH v3 18/40 dc395: use standard macros to set SCSI result
In reply to Hannes ReineckeUse standard macros to set the SCSI result and drop the internal ones.
--- drivers/scsi/dc395x.c | 76 ++++++++++++++++--------------------------- 1 file changed, 28 insertions(+), 48 deletions(-)
drivers/scsi/dc395x.c +28 -48
@@ -160,22 +160,6 @@#define DC395x_write16 (acb,address,value) outw((value), acb->io_port_base + (address))#define DC395x_write32 (acb,address,value) outl((value), acb->io_port_base + (address)) -/* cmd->result */ -#define RES_TARGET 0x000000FF/* Target State */ -#define RES_TARGET_LNX STATUS_MASK/* Only official ... */ -#define RES_ENDMSG 0x0000FF00/* End Message */ -#define RES_DID 0x00FF0000/* DID_ codes */ -#define RES_DRV 0xFF000000/* DRIVER_ codes */ - -#define MK_RES (drv,did,msg,tgt) ((int)(drv)<<24 | (int)(did)<<16 | (int)(msg)<<8 | (int)(tgt)) -#define MK_RES_LNX (drv,did,msg,tgt) ((int)(drv)<<24 | (int)(did)<<16 | (int)(msg)<<8 | (int)(tgt)<<1) - -#define SET_RES_TARGET (who,tgt) { who &= ~RES_TARGET; who |= (int)(tgt); } -#define SET_RES_TARGET_LNX (who,tgt) { who &= ~RES_TARGET_LNX; who |= (int)(tgt) << 1; } -#define SET_RES_MSG (who,msg) { who &= ~RES_ENDMSG; who |= (int)(msg) << 8; } -#define SET_RES_DID (who,did) { who &= ~RES_DID; who |= (int)(did) << 16; } -#define SET_RES_DRV (who,drv) { who &= ~RES_DRV; who |= (int)(drv) << 24; } -#define TAG_NONE 255/*
@@ -986,7 +970,7 @@ static int dc395x_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct s cmd, cmd->device->id, (u8)cmd->device->lun, cmd->cmnd[0]);/* Assume BAD_TARGET; will be cleared later */ - cmd->result =DID_BAD_TARGET <<16 ; +set_host_byte (cmd,DID_BAD_TARGET );/* ignore invalid targets */ if (cmd->device->id >= acb->scsi_host->max_id ||
@@ -1013,7 +997,8 @@ static int dc395x_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct s/* set callback and clear result in the command */ cmd->scsi_done = done; - cmd->result =0 ; +set_host_byte (cmd,DID_OK ); +set_status_byte (cmd,SAM_STAT_GOOD ); srb =list_first_entry_or_null (&acb->srb_free_list, struct ScsiReqBlk, list);
@@ -1250,7 +1235,7 @@ static int dc395x_eh_abort(struct scsi_cmnd *cmd)free_tag (dcb, srb);list_add_tail (&srb->list, &acb->srb_free_list);dprintkl (KERN_DEBUG ,"eh_abort: Command was waiting\n" ); - cmd->result =DID_ABORT <<16 ; +set_host_byte (cmd,DID_ABORT );return SUCCESS ; } srb =find_cmd (cmd, &dcb->srb_going_list);
@@ -3178,6 +3163,8 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb, srb,scsi_sg_count (cmd), srb->sg_index, srb->sg_count, scsi_sgtalbe(cmd)); status = srb->target_status; +set_host_byte (cmd,DID_OK ); +set_status_byte (cmd,SAM_STAT_GOOD );if (srb->flag &AUTO_REQSENSE ) {dprintkdbg (DBG_0 ,"srb_done: AUTO_REQSENSE1\n" );pci_unmap_srb_sense (acb, srb);
@@ -3186,7 +3173,7 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,*/ srb->flag &= ~AUTO_REQSENSE ; srb->adapter_status =0 ; - srb->target_status =CHECK_CONDITION <<1 ; + srb->target_status =SAM_STAT_CHECK_CONDITION ;if (debug_enabled (DBG_1 )) {switch (cmd->sense_buffer[2 ] &0x0f ) {case NOT_READY :
@@ -3233,15 +3220,14 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb, *((unsigned int *)(cmd->sense_buffer + 3))); } -if (status == (CHECK_CONDITION <<1 )) { - cmd->result =DID_BAD_TARGET <<16 ; +if (status ==SAM_STAT_CHECK_CONDITION ) { +set_host_byte (cmd,DID_BAD_TARGET ); goto ckc_e; }dprintkdbg (DBG_0 ,"srb_done: AUTO_REQSENSE2\n" ); - cmd->result = -MK_RES (0 ,DID_OK , - srb->end_message,SAM_STAT_CHECK_CONDITION ); +set_msg_byte (cmd, srb->end_message); +set_status_byte (cmd,SAM_STAT_CHECK_CONDITION ); goto ckc_e; }
@@ -3251,10 +3237,10 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,/* * target status.......................... */ -if (status >>1 ==CHECK_CONDITION ) { +if (status ==SAM_STAT_CHECK_CONDITION ) {request_sense (acb, dcb, srb);return ; - }else if (status >>1 ==QUEUE_FULL ) { + }else if (status ==SAM_STAT_TASK_SET_FULL ) { tempcnt = (u8 )list_size (&dcb->srb_going_list);dprintkl (KERN_INFO ,"QUEUE_FULL for dev <%02i-%i> with %i cmnds\n" , dcb->target_id, dcb->target_lun, tempcnt);
@@ -3270,13 +3256,12 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb, }else if (status ==SCSI_STAT_SEL_TIMEOUT ) { srb->adapter_status =H_SEL_TIMEOUT ; srb->target_status =0 ; - cmd->result =DID_NO_CONNECT <<16 ; +set_host_byte (cmd,DID_NO_CONNECT ); }else { srb->adapter_status =0 ; -SET_RES_DID (cmd->result,DID_ERROR ); -SET_RES_MSG (cmd->result, srb->end_message); -SET_RES_TARGET (cmd->result, status); - +set_host_byte (cmd,DID_ERROR ); +set_msg_byte (cmd, srb->end_message); +set_status_byte (cmd, status); } }else {/*
@@ -3285,16 +3270,14 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb, status = srb->adapter_status;if (status &H_OVER_UNDER_RUN ) { srb->target_status =0 ; -SET_RES_DID (cmd->result,DID_OK ); -SET_RES_MSG (cmd->result, srb->end_message); +set_msg_byte (cmd, srb->end_message); }else if (srb->status &PARITY_ERROR ) { -SET_RES_DID (cmd->result,DID_PARITY ); -SET_RES_MSG (cmd->result, srb->end_message); +set_host_byte (cmd,DID_PARITY ); +set_msg_byte (cmd, srb->end_message); }else {/* No error */ srb->adapter_status =0 ; srb->target_status =0 ; -SET_RES_DID (cmd->result,DID_OK ); } }
@@ -3315,15 +3298,15 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb, base =scsi_kmap_atomic_sg (sg,scsi_sg_count (cmd), &offset, &len); ptr = (struct ScsiInqData *)(base + offset); -if (!ckc_only && (cmd->result &RES_DID ) ==0 +if (!ckc_only &&get_host_byte (cmd) ==DID_OK && cmd->cmnd[2 ] ==0 &&scsi_bufflen (cmd) >=8 && dir !=DMA_NONE && ptr && (ptr->Vers &0x07 ) >=2 ) dcb->inquiry7 = ptr->Flags;/*if( srb->cmd->cmnd[0] == INQUIRY && */ /* (host_byte(cmd->result) == DID_OK || status_byte(cmd->result) & CHECK_CONDITION) ) */ -if ((cmd->result == (DID_OK <<16 ) || -status_byte (cmd->result) ==CHECK_CONDITION )) { +if ((get_host_byte (cmd) ==DID_OK ) || + (get_status_byte (cmd) ==SAM_STAT_CHECK_CONDITION )) {if (!dcb->init_tcq_flag) {add_dev (acb, dcb, ptr); dcb->init_tcq_flag =1 ;
@@ -3350,7 +3333,7 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,if (srb != acb->tmp_srb) {/* Add to free list */ dprintkdbg (DBG_0 ,"srb_done: (0x%p) done result=0x%08x\n" , - cmd, cmd->result); + cmd, cmd->result);list_move_tail (&srb->list, &acb->srb_free_list); }else {dprintkl (KERN_ERR ,"srb_done: ERROR! Completed cmd with tmp_srb\n" );
@@ -3374,16 +3357,14 @@ static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_flag,struct scsi_cmnd *p;list_for_each_entry_safe (srb, tmp, &dcb->srb_going_list, list) { -int result; - p = srb->cmd; - result =MK_RES (0 , did_flag,0 ,0 );printk ("G:%p(%02i-%i) " , p, p->device->id, (u8 )p->device->lun);list_del (&srb->list);free_tag (dcb, srb);list_add_tail (&srb->list, &acb->srb_free_list); - p->result = result; +set_host_byte (p, did_flag); +set_status_byte (p,SAM_STAT_GOOD );pci_unmap_srb_sense (acb, srb);pci_unmap_srb (acb, srb);if (force) {
@@ -3404,14 +3385,13 @@ static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_flag,/* Waiting queue */ list_for_each_entry_safe (srb, tmp, &dcb->srb_waiting_list, list) { -int result; p = srb->cmd; - result =MK_RES (0 , did_flag,0 ,0 );printk ("W:%p<%02i-%i>" , p, p->device->id, (u8 )p->device->lun);list_move_tail (&srb->list, &acb->srb_free_list); - p->result = result; +set_host_byte (p, did_flag); +set_status_byte (p,SAM_STAT_GOOD );pci_unmap_srb_sense (acb, srb);pci_unmap_srb (acb, srb);if (force) {
Signature · 1 line
2.29.2
PATCH v3 16/40 scsi: add get_{status,host}_byte() accessor function
In reply to Hannes ReineckeAdd accessor functions for the host and status byte.
--- include/scsi/scsi_cmnd.h | 10 ++++++++++ 1 file changed, 10 insertions(+)
include/scsi/scsi_cmnd.h +10 -0
@@ -316,6 +316,11 @@ static inline void set_status_byte(struct scsi_cmnd *cmd, char status) cmd->result = (cmd->result &0xffffff00 ) | status; } +static inline u8 get_status_byte (struct scsi_cmnd *cmd) +{ +return cmd->result &0xff ; +} +static inline void set_msg_byte (struct scsi_cmnd *cmd,char status) { cmd->result = (cmd->result &0xffff00ff ) | (status <<8 );
@@ -326,6 +331,11 @@ static inline void set_host_byte(struct scsi_cmnd *cmd, char status) cmd->result = (cmd->result &0xff00ffff ) | (status <<16 ); } +static inline u8 get_host_byte (struct scsi_cmnd *cmd) +{ +return (cmd->result >>16 ) &0xff ; +} +static inline unsigned scsi_transfer_length (struct scsi_cmnd *scmd) {
Signature · 1 line
2.29.2
PATCH v3 24/40 nsp32: do not set message byte
In reply to Hannes ReineckeThe message byte always devolves to COMMAND_COMPLETE, so there is no point in setting it.
--- drivers/scsi/nsp32.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
drivers/scsi/nsp32.c +1 -5
@@ -948,7 +948,6 @@ static int nsp32_queuecommand_lck(struct scsi_cmnd *SCpnt, SCpnt->scsi_done = done; data->CurrentSC = SCpnt; SCpnt->SCp.Status =SAM_STAT_CHECK_CONDITION ; - SCpnt->SCp.Message =0 ;scsi_set_resid (SCpnt,scsi_bufflen (SCpnt)); SCpnt->SCp.ptr = (char *)scsi_sglist (SCpnt);
@@ -1690,12 +1689,10 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)nsp32_dbg (NSP32_DEBUG_BUSFREE ,"command complete" ); SCpnt->SCp.Status =nsp32_read1 (base,SCSI_CSB_IN ); - SCpnt->SCp.Message =0 ;nsp32_dbg (NSP32_DEBUG_BUSFREE ,"normal end stat=0x%x resid=0x%x\n" , SCpnt->SCp.Status,scsi_get_resid (SCpnt)); SCpnt->result = (DID_OK <<16 ) | - (SCpnt->SCp.Message <<8 ) | (SCpnt->SCp.Status <<0 );nsp32_scsi_done (SCpnt);/* All operation is done */
@@ -1703,7 +1700,6 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph) }else if (execph &MSGIN_04_VALID ) {/* MsgIn 04: Disconnect */ SCpnt->SCp.Status =nsp32_read1 (base,SCSI_CSB_IN ); - SCpnt->SCp.Message =4 ;nsp32_dbg (NSP32_DEBUG_BUSFREE ,"disconnect" );return TRUE;
@@ -1712,7 +1708,7 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)nsp32_msg (KERN_WARNING ,"unexpected bus free occurred" );/* DID_ERROR? */ -//SCpnt->result = (DID_OK << 16) | (SCpnt->SCp.Message << 8) | (SCpnt->SCp.Status << 0); +//SCpnt->result = (DID_OK << 16) | (SCpnt->SCp.Status << 0); SCpnt->result =DID_ERROR <<16 ;nsp32_scsi_done (SCpnt);return TRUE;
Signature · 1 line
2.29.2
PATCH v3 15/40 NCR5380: Fold SCSI message ABORT onto DID_ABORT
In reply to Hannes ReineckeThe message byte can take only two values, COMMAND_COMPLETE and ABORT. So we can easily map ABORT to DID_ABORT and do not set the message byte.
--- drivers/scsi/NCR5380.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/scsi/NCR5380.c +3 -3
@@ -1815,6 +1815,8 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)switch (tmp) {case ABORT : +set_host_byte (cmd,DID_ABORT ); +/* fallthrough */ case COMMAND_COMPLETE :/* Accept message by clearing ACK */ sink =1 ;
@@ -1826,9 +1828,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) hostdata->connected =NULL ; hostdata->busy[scmd_id (cmd)] &= ~(1 << cmd->device->lun); - cmd->result &= ~0xffff ; - cmd->result |= cmd->SCp.Status; - cmd->result |= cmd->SCp.Message <<8 ; +set_status_byte (cmd, cmd->SCp.Status);set_resid_from_SCp (cmd);
Signature · 1 line
2.29.2
PATCH v3 21/40 qlogicfas408: whitespace cleanup
In reply to Hannes Reinecke--- drivers/scsi/qlogicfas408.c | 61 +++++++++++++++++++------------------ 1 file changed, 31 insertions(+), 30 deletions(-)
drivers/scsi/qlogicfas408.c +31 -30
@@ -4,9 +4,9 @@ Use at your own risk. Support Tort Reform so you won't have to read all these silly disclaimers. - Copyright 1994, Tom Zerucha. + Copyright 1994, Tom Zerucha. [email protected] - + Additional Code, and much appreciated help by Michael A. Griffith [email protected]
@@ -22,12 +22,12 @@ Functions as standalone, loadable, and PCMCIA driver, the latter from Dave Hinds' PCMCIA package. - + Cleaned up 26/10/2002 by Alan Cox <[email protected]> as part of the 2.5 SCSI driver cleanup and audit. This driver still needs work on the following - - Non terminating hardware waits - - Some layering violations with its pcmcia stub + - Non terminating hardware waits + - Some layering violations with its pcmcia stub Redistributable under terms of the GNU General Public License
@@ -92,8 +92,9 @@ static void ql_zap(struct qlogicfas408_priv *priv)/* * Do a pseudo-dma tranfer */ - -static int ql_pdma (struct qlogicfas408_priv *priv,int phase,char *request,int reqlen) + +static int ql_pdma (struct qlogicfas408_priv *priv,int phase,char *request, +int reqlen) {int j;int qbase = priv->qbase;
@@ -108,7 +109,7 @@ static int ql_pdma(struct qlogicfas408_priv *priv, int phase, char *request, int request +=128 ; }while (reqlen >=84 && !(j &0xc0 ))/* 2/3 */ -if ((j =inb (qbase +8 )) &4 ) +if ((j =inb (qbase +8 )) &4 ) {insl (qbase +4 , request,21 ); reqlen -=84 ;
@@ -123,11 +124,11 @@ static int ql_pdma(struct qlogicfas408_priv *priv, int phase, char *request, int/* until both empty and int (or until reclen is 0) */ rtrc (7 ) j = 0; -while (reqlen && !((j &0x10 ) && (j &0xc0 ))) +while (reqlen && !((j &0x10 ) && (j &0xc0 ))) {/* while bytes to receive and not empty */ j &=0xc0 ; -while (reqlen && !((j =inb (qbase +8 )) &0x10 )) +while (reqlen && !((j =inb (qbase +8 )) &0x10 )) { *request++ =inb (qbase +4 ); reqlen--;
@@ -161,7 +162,7 @@ static int ql_pdma(struct qlogicfas408_priv *priv, int phase, char *request, int j =0 ;while (reqlen && !((j &2 ) && (j &0xc0 ))) {/* while bytes to send and not full */ -while (reqlen && !((j =inb (qbase +8 )) &2 )) +while (reqlen && !((j =inb (qbase +8 )) &2 )) {outb (*request++, qbase +4 ); reqlen--;
@@ -175,7 +176,7 @@ static int ql_pdma(struct qlogicfas408_priv *priv, int phase, char *request, int }/* -* Wait for interrupt flag (polled - not real hardware interrupt) +* Wait for interrupt flag (polled - not real hardware interrupt) */ static int ql_wai (struct qlogicfas408_priv *priv)
@@ -205,14 +206,14 @@ static int ql_wai(struct qlogicfas408_priv *priv) }/* -* Initiate scsi command - queueing handler +* Initiate scsi command - queueing handler * caller must hold host lock */ static void ql_icmd (struct scsi_cmnd *cmd) {struct qlogicfas408_priv *priv =get_priv_by_cmd (cmd); -int qbase = priv->qbase; +int qbase = priv->qbase;int int_type = priv->int_type;unsigned int i;
@@ -253,7 +254,7 @@ static void ql_icmd(struct scsi_cmnd *cmd) }/* -* Process scsi command - usually after interrupt +* Process scsi command - usually after interrupt */ static void ql_pcmd (struct scsi_cmnd *cmd)
@@ -329,7 +330,7 @@ static void ql_pcmd(struct scsi_cmnd *cmd)rtrc (2 );/* * Wait for irq (split into second state of irq handler -* if this can take time) +* if this can take time) */ if ((k =ql_wai (priv))) {set_host_byte (cmd, k);
@@ -339,9 +340,9 @@ static void ql_pcmd(struct scsi_cmnd *cmd) }/* -* Enter Status (and Message In) Phase +* Enter Status (and Message In) Phase */ - + k = jiffies +WATCHDOG ; while (time_before(jiffies, k) && !priv->qabort &&
@@ -375,8 +376,8 @@ static void ql_pcmd(struct scsi_cmnd *cmd) message =inb (qbase +2 );/* -* Should get function complete int if Status and message, else -* bus serv if only status +* Should get function complete int if Status and message, else +* bus serv if only status */ if (!((i ==8 && j ==2 ) || (i ==0x10 && j ==1 ))) {printk (KERN_ERR "Ql:Error during status phase, int=%02X, %d bytes recd\n" , i, j);
@@ -390,9 +391,9 @@ static void ql_pcmd(struct scsi_cmnd *cmd) }/* -* Should get bus service interrupt and disconnect interrupt +* Should get bus service interrupt and disconnect interrupt */ - + i =inb (qbase +5 );/* should be bus service */ while (!priv->qabort && ((i &0x20 ) !=0x20 )) {barrier ();
@@ -414,7 +415,7 @@ static void ql_pcmd(struct scsi_cmnd *cmd) }/* -* Interrupt handler +* Interrupt handler */ static void ql_ihandl (void *dev_id)
@@ -438,8 +439,8 @@ static void ql_ihandl(void *dev_id)ql_pcmd (icmd); priv->qlcmd =NULL ;/* -* If result is CHECK CONDITION done calls qcommand to request -* sense +* If result is CHECK CONDITION done calls qcommand to request +* sense */ (icmd->scsi_done) (icmd); }
@@ -484,8 +485,8 @@ static int qlogicfas408_queuecommand_lck(struct scsi_cmnd *cmd, DEF_SCSI_QCMD(qlogicfas408_queuecommand) -/* - * Return bios parameters +/* + * Return bios parameters */ int qlogicfas408_biosparam(struct scsi_device *disk, struct block_device *dev,
@@ -510,7 +511,7 @@ int qlogicfas408_biosparam(struct scsi_device *disk, struct block_device *dev,/* * Abort a command in progress */ - +int qlogicfas408_abort (struct scsi_cmnd *cmd) {struct qlogicfas408_priv *priv =get_priv_by_cmd (cmd);
@@ -589,9 +590,9 @@ void qlogicfas408_setup(int qbase, int id, int int_type)int qlogicfas408_detect (int qbase,int int_type) { -REG1 ; +REG1 ;return (((inb (qbase +0xe ) ^inb (qbase +0xe )) ==7 ) && - ((inb (qbase +0xe ) ^inb (qbase +0xe )) ==7 )); + ((inb (qbase +0xe ) ^inb (qbase +0xe )) ==7 )); }/*
Signature · 1 line
2.29.2
PATCH v3 19/40 dc395: translate message bytes
In reply to Hannes ReineckeDrop message byte setting if the host byte is already set, and translate message bytes into the related host bytes when evaluating an overrun or underrun.
--- drivers/scsi/dc395x.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
drivers/scsi/dc395x.c +1 -4
@@ -3226,7 +3226,6 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb, }dprintkdbg (DBG_0 ,"srb_done: AUTO_REQSENSE2\n" ); -set_msg_byte (cmd, srb->end_message);set_status_byte (cmd,SAM_STAT_CHECK_CONDITION ); goto ckc_e;
@@ -3260,7 +3259,6 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb, }else { srb->adapter_status =0 ;set_host_byte (cmd,DID_ERROR ); -set_msg_byte (cmd, srb->end_message);set_status_byte (cmd, status); } }else {
@@ -3270,10 +3268,9 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb, status = srb->adapter_status;if (status &H_OVER_UNDER_RUN ) { srb->target_status =0 ; -set_msg_byte (cmd, srb->end_message); +scsi_msg_to_host_byte (cmd, srb->end_message); }else if (srb->status &PARITY_ERROR ) {set_host_byte (cmd,DID_PARITY ); -set_msg_byte (cmd, srb->end_message); }else {/* No error */ srb->adapter_status =0 ;
Signature · 1 line
2.29.2
PATCH v3 22/40 qlogicfas408: translate message to host byte status
In reply to Hannes ReineckeInstead of setting the message byte translate it to the appropriate host byte. As error recovery would return DID_ERROR for any non-zero message byte the translation doesn't change the error handling.
--- drivers/scsi/qlogicfas408.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/scsi/qlogicfas408.c +2 -1
@@ -409,7 +409,8 @@ static void ql_pcmd(struct scsi_cmnd *cmd) }set_host_byte (cmd, result); -set_msg_byte (cmd, message); +if (result ==DID_OK && message !=COMMAND_COMPLETE ) +scsi_msg_to_host_byte (cmd, message);set_status_byte (cmd, status);return ; }
Signature · 1 line
2.29.2
PATCH v3 17/40 scsi: add scsi_msg_to_host_byte()
In reply to Hannes ReineckeAdd helper to convert message byte into a host byte code.
--- include/scsi/scsi_cmnd.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
include/scsi/scsi_cmnd.h +26 -0
@@ -336,6 +336,32 @@ static inline u8 get_host_byte(struct scsi_cmnd *cmd)return (cmd->result >>16 ) &0xff ; } +/** +* scsi_msg_to_host_byte() - translate message byte +* +* Translate the SCSI parallel message byte to a matching +* host byte setting. A message of COMMAND_COMPLETE indicates +* a successful command execution, any other message indicate +* an error. As the messages themselves only have a meaning +* for the SCSI parallel protocol this function translates +* them into a matching host byte value for SCSI EH. +*/ +static inline void scsi_msg_to_host_byte (struct scsi_cmnd *cmd,u8 msg) +{ +switch (msg) { +case COMMAND_COMPLETE : +break ; +case ABORT_TASK_SET : +set_host_byte (cmd,DID_ABORT ); +break ; +case TARGET_RESET : +set_host_byte (cmd,DID_RESET ); +break ; +default : +set_host_byte (cmd,DID_ERROR ); +break ; + } +}static inline unsigned scsi_transfer_length (struct scsi_cmnd *scmd) {
Signature · 1 line
2.29.2
PATCH v3 26/40 mesh: translate message to host byte status
In reply to Hannes ReineckeInstead of setting the message byte translate it to a host byte status. As the error recovery would map it to DID_ERROR anyway the translation doesn't change the SCSI error handling.
--- drivers/scsi/mesh.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/scsi/mesh.c +5 -4
@@ -595,9 +595,10 @@ static void mesh_done(struct mesh_state *ms, int start_next) ms->current_req =NULL ; tp->current_req =NULL ;if (cmd) { - cmd->result = (ms->stat <<16 ) | cmd->SCp.Status; +set_host_byte (cmd, ms->stat); +set_status_byte (cmd, cmd->SCp.Status);if (ms->stat ==DID_OK ) - cmd->result |= cmd->SCp.Message <<8 ; +scsi_msg_to_host_byte (cmd, cmd->SCp.Message);if (DEBUG_TARGET (cmd)) {printk (KERN_DEBUG "mesh_done: result = %x, data_ptr=%d, buflen=%d\n" , cmd->result, ms->data_ptr,scsi_bufflen (cmd));
@@ -993,7 +994,7 @@ static void handle_reset(struct mesh_state *ms)for (tgt =0 ; tgt <8 ; ++tgt) { tp = &ms->tgts[tgt];if ((cmd = tp->current_req) !=NULL ) { - cmd->result =DID_RESET <<16 ; +set_host_byte (cmd,DID_RESET ); tp->current_req =NULL ;mesh_completed (ms, cmd); }
@@ -1003,7 +1004,7 @@ static void handle_reset(struct mesh_state *ms) ms->current_req =NULL ;while ((cmd = ms->request_q) !=NULL ) { ms->request_q = (struct scsi_cmnd *) cmd->host_scribble; - cmd->result =DID_RESET <<16 ; +set_host_byte (cmd,DID_RESET );mesh_completed (ms, cmd); } ms->phase = idle;
Signature · 1 line
2.29.2
PATCH v3 25/40 wd33c93: translate message byte to host byte
In reply to Hannes ReineckeInstead of setting the message byte translate it to the appropriate host byte. As error recovery would return DID_ERROR for any non-zero message byte the translation doesn't change the error handling.
--- drivers/scsi/wd33c93.c | 43 ++++++++++++++++++++++-------------------- 1 file changed, 23 insertions(+), 20 deletions(-)
drivers/scsi/wd33c93.c +23 -20
@@ -1176,13 +1176,13 @@ wd33c93_intr(struct Scsi_Host *instance)if (cmd->SCp.Status ==ILLEGAL_STATUS_BYTE ) cmd->SCp.Status = lun;if (cmd->cmnd[0 ] ==REQUEST_SENSE - && cmd->SCp.Status !=SAM_STAT_GOOD ) - cmd->result = - (cmd-> - result &0x00ffff ) | (DID_ERROR <<16 ); -else - cmd->result = - cmd->SCp.Status | (cmd->SCp.Message <<8 ); + && cmd->SCp.Status !=SAM_STAT_GOOD ) { +set_host_byte (cmd,DID_ERROR ); + }else { +set_host_byte (cmd,DID_OK ); +scsi_msg_to_host_byte (cmd, cmd->SCp.Message); +set_status_byte (cmd, cmd->SCp.Status); + } cmd->scsi_done (cmd);/* We are no longer connected to a target - check to see if
@@ -1262,11 +1262,14 @@ wd33c93_intr(struct Scsi_Host *instance) hostdata->connected =NULL ; hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun &0xff )); hostdata->state =S_UNCONNECTED ; -if (cmd->cmnd[0 ] ==REQUEST_SENSE && cmd->SCp.Status !=SAM_STAT_GOOD ) - cmd->result = - (cmd->result &0x00ffff ) | (DID_ERROR <<16 ); -else - cmd->result = cmd->SCp.Status | (cmd->SCp.Message <<8 ); +if (cmd->cmnd[0 ] ==REQUEST_SENSE && + cmd->SCp.Status !=SAM_STAT_GOOD ) { +set_host_byte (cmd,DID_ERROR ); + }else { +set_host_byte (cmd,DID_OK ); +scsi_msg_to_host_byte (cmd, cmd->SCp.Message); +set_status_byte (cmd, cmd->SCp.Status); + } cmd->scsi_done (cmd);/* We are no longer connected to a target - check to see if
@@ -1295,14 +1298,14 @@ wd33c93_intr(struct Scsi_Host *instance) hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun &0xff )); hostdata->state =S_UNCONNECTED ; DB(DB_INTR, printk(":%d", cmd->SCp.Status)) -if (cmd->cmnd[0 ] ==REQUEST_SENSE - && cmd->SCp.Status !=SAM_STAT_GOOD ) - cmd->result = - (cmd-> - result &0x00ffff ) | (DID_ERROR <<16 ); -else - cmd->result = - cmd->SCp.Status | (cmd->SCp.Message <<8 ); +if (cmd->cmnd[0 ] ==REQUEST_SENSE + && cmd->SCp.Status !=SAM_STAT_GOOD ) { +set_host_byte (cmd,DID_ERROR ); + }else { +set_host_byte (cmd,DID_OK ); +scsi_msg_to_host_byte (cmd, cmd->SCp.Message); +set_status_byte (cmd, cmd->SCp.Status); + } cmd->scsi_done (cmd);break ;case S_PRE_TMP_DISC :
Signature · 1 line
2.29.2
PATCH v3 28/40 acornscsi: translate message byte to host byte
In reply to Hannes ReineckeInstead of setting the message byte translate it to the appropriate host byte. As error recovery would return DID_ERROR for any non-zero message byte the translation doesn't change the error handling. And use SCSI result accessors while we're at it.
--- drivers/scsi/arm/acornscsi.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-)
drivers/scsi/arm/acornscsi.c +12 -9
@@ -794,7 +794,10 @@ static void acornscsi_done(AS_Host *host, struct scsi_cmnd **SCpntp,acornscsi_dma_cleanup (host); - SCpnt->result = result <<16 | host->scsi.SCp.Message <<8 | host->scsi.SCp.Status; +set_host_byte (SCpnt, result); +if (result ==DID_OK ) +scsi_msg_to_host_byte (SCpnt, host->scsi.SCp.Message); +set_status_byte (SCpnt, host->scsi.SCp.Status);/* * In theory, this should not happen. In practice, it seems to.
@@ -833,12 +836,12 @@ static void acornscsi_done(AS_Host *host, struct scsi_cmnd **SCpntp, xfer_warn =0 ;if (xfer_warn) { -switch (status_byte (SCpnt->result)) { -case CHECK_CONDITION : -case COMMAND_TERMINATED : -case BUSY : -case QUEUE_FULL : -case RESERVATION_CONFLICT : +switch (get_status_byte (SCpnt)) { +case SAM_STAT_CHECK_CONDITION : +case SAM_STAT_COMMAND_TERMINATED : +case SAM_STAT_BUSY : +case SAM_STAT_TASK_SET_FULL : +case SAM_STAT_RESERVATION_CONFLICT :break ;default :
@@ -2470,7 +2473,7 @@ static int acornscsi_queuecmd_lck(struct scsi_cmnd *SCpnt,if (acornscsi_cmdtype (SCpnt->cmnd[0 ]) ==CMD_WRITE && (NO_WRITE & (1 << SCpnt->device->id))) {printk (KERN_CRIT "scsi%d.%c: WRITE attempted with NO_WRITE flag set\n" , host->host->host_no,'0' + SCpnt->device->id); - SCpnt->result =DID_NO_CONNECT <<16 ; +set_host_byte (SCpnt,DID_NO_CONNECT );done (SCpnt);return 0 ; }
@@ -2492,7 +2495,7 @@ static int acornscsi_queuecmd_lck(struct scsi_cmnd *SCpnt,unsigned long flags;if (!queue_add_cmd_ordered (&host->queues.issue, SCpnt)) { - SCpnt->result =DID_ERROR <<16 ; +set_host_byte (SCpnt,DID_ERROR );done (SCpnt);return 0 ; }
Signature · 1 line
2.29.2
PATCH v3 31/40 advansys: do not set message byte in SCSI status
In reply to Hannes ReineckeThe host byte in the SCSI status takes precedence during error recovery, so there is no point in setting the message byte in addition to a host byte which is not DID_OK.
--- drivers/scsi/advansys.c | 2 -- 1 file changed, 2 deletions(-)
drivers/scsi/advansys.c +0 -2
@@ -6773,14 +6773,12 @@ static void asc_isr_callback(ASC_DVC_VAR *asc_dvc_varp, ASC_QDONE_INFO *qdonep)case QD_ABORTED_BY_HOST :ASC_DBG (1 ,"QD_ABORTED_BY_HOST\n" );set_status_byte (scp, qdonep->d3.scsi_stat); -set_msg_byte (scp, qdonep->d3.scsi_msg);set_host_byte (scp,DID_ABORT );break ;default :ASC_DBG (1 ,"done_stat 0x%x\n" , qdonep->d3.done_stat);set_status_byte (scp, qdonep->d3.scsi_stat); -set_msg_byte (scp, qdonep->d3.scsi_msg);set_host_byte (scp,DID_ERROR );break ; }
Signature · 1 line
2.29.2
PATCH v3 29/40 aha152x: modify done() to use separate status bytes
In reply to Hannes ReineckeInstead of passing in the combined SCSI result value split them off into separate status, message, and host byte values.
--- drivers/scsi/aha152x.c | 43 ++++++++++++++++++++++++++++-------------- 1 file changed, 29 insertions(+), 14 deletions(-)
drivers/scsi/aha152x.c +29 -14
@@ -619,7 +619,8 @@ static struct {static irqreturn_t intr (int irq,void *dev_id);static void reset_ports (struct Scsi_Host *shpnt);static void aha152x_error (struct Scsi_Host *shpnt,char *msg); -static void done (struct Scsi_Host *shpnt,int error); +static void done (struct Scsi_Host *shpnt,unsigned char status_byte, +unsigned char msg_byte,unsigned char host_byte);/* diagnostics */ static void show_command (struct scsi_cmnd * ptr);
@@ -1271,7 +1272,8 @@ static int aha152x_biosparam(struct scsi_device *sdev, struct block_device *bdev* Internal done function * */ -static void done (struct Scsi_Host *shpnt,int error) +static void done (struct Scsi_Host *shpnt,unsigned char status_byte, +unsigned char msg_byte,unsigned char host_byte) {if (CURRENT_SC ) {if (DONE_SC )
@@ -1281,7 +1283,9 @@ static void done(struct Scsi_Host *shpnt, int error)DONE_SC =CURRENT_SC ;CURRENT_SC =NULL ; -DONE_SC ->result = error; +DONE_SC ->result = status_byte; +set_msg_byte (DONE_SC , msg_byte); +set_host_byte (DONE_SC , host_byte); }else printk (KERN_ERR "aha152x: done() called outside of command\n" ); }
@@ -1376,13 +1380,16 @@ static void busfree_run(struct Scsi_Host *shpnt)if (CURRENT_SC ->SCp.phase & completed) {/* target sent COMMAND COMPLETE */ -done (shpnt, (CURRENT_SC ->SCp.Status &0xff ) | ((CURRENT_SC ->SCp.Message &0xff ) <<8 ) | (DID_OK <<16 )); +done (shpnt,CURRENT_SC ->SCp.Status, +CURRENT_SC ->SCp.Message,DID_OK ); }else if (CURRENT_SC ->SCp.phase & aborted) { -done (shpnt, (CURRENT_SC ->SCp.Status &0xff ) | ((CURRENT_SC ->SCp.Message &0xff ) <<8 ) | (DID_ABORT <<16 )); +done (shpnt,CURRENT_SC ->SCp.Status, +CURRENT_SC ->SCp.Message,DID_ABORT ); }else if (CURRENT_SC ->SCp.phase & resetted) { -done (shpnt, (CURRENT_SC ->SCp.Status &0xff ) | ((CURRENT_SC ->SCp.Message &0xff ) <<8 ) | (DID_RESET <<16 )); +done (shpnt,CURRENT_SC ->SCp.Status, +CURRENT_SC ->SCp.Message,DID_RESET ); }else if (CURRENT_SC ->SCp.phase & disconnected) {/* target sent DISCONNECT */
@@ -1394,7 +1401,8 @@ static void busfree_run(struct Scsi_Host *shpnt)CURRENT_SC =NULL ; }else { -done (shpnt,DID_ERROR <<16 ); +done (shpnt,SAM_STAT_GOOD , +COMMAND_COMPLETE ,DID_ERROR ); }#if defined(AHA152X_STAT ) } else {
@@ -1515,7 +1523,8 @@ static void seldo_run(struct Scsi_Host *shpnt)if (TESTLO (SSTAT0 ,SELDO )) {scmd_printk (KERN_ERR ,CURRENT_SC ,"aha152x: passing bus free condition\n" ); -done (shpnt,DID_NO_CONNECT <<16 ); +done (shpnt,SAM_STAT_GOOD , +COMMAND_COMPLETE ,DID_NO_CONNECT );return ; }
@@ -1552,12 +1561,15 @@ static void selto_run(struct Scsi_Host *shpnt)CURRENT_SC ->SCp.phase &= ~selecting;if (CURRENT_SC ->SCp.phase & aborted) -done (shpnt,DID_ABORT <<16 ); +done (shpnt,SAM_STAT_GOOD , +COMMAND_COMPLETE ,DID_ABORT );else if (TESTLO (SSTAT0 ,SELINGO )) -done (shpnt,DID_BUS_BUSY <<16 ); +done (shpnt,SAM_STAT_GOOD , +COMMAND_COMPLETE ,DID_BUS_BUSY );else /* ARBITRATION won, but SELECTION failed */ -done (shpnt,DID_NO_CONNECT <<16 ); +done (shpnt,SAM_STAT_GOOD , +COMMAND_COMPLETE ,DID_NO_CONNECT ); }/*
@@ -1891,7 +1903,8 @@ static void cmd_init(struct Scsi_Host *shpnt)if (CURRENT_SC ->SCp.sent_command) {scmd_printk (KERN_ERR ,CURRENT_SC ,"command already sent\n" ); -done (shpnt,DID_ERROR <<16 ); +done (shpnt,SAM_STAT_GOOD , +COMMAND_COMPLETE ,DID_ERROR );return ; }
@@ -2231,7 +2244,8 @@ static int update_state(struct Scsi_Host *shpnt)static void parerr_run (struct Scsi_Host *shpnt) {scmd_printk (KERN_ERR ,CURRENT_SC ,"parity error\n" ); -done (shpnt,DID_PARITY <<16 ); +done (shpnt,SAM_STAT_GOOD , +COMMAND_COMPLETE ,DID_PARITY ); }/*
@@ -2262,7 +2276,8 @@ static void rsti_run(struct Scsi_Host *shpnt) }if (CURRENT_SC && !CURRENT_SC ->device->soft_reset) -done (shpnt,DID_RESET <<16 ); +done (shpnt,SAM_STAT_GOOD , +COMMAND_COMPLETE ,DID_RESET ); }
Signature · 1 line
2.29.2
PATCH v3 27/40 acornscsi: remove acornscsi_reportstatus()
In reply to Hannes ReineckeUnused.
--- drivers/scsi/arm/acornscsi.c | 25 ------------------------- 1 file changed, 25 deletions(-)
drivers/scsi/arm/acornscsi.c +0 -25
@@ -2506,31 +2506,6 @@ static int acornscsi_queuecmd_lck(struct scsi_cmnd *SCpnt,DEF_SCSI_QCMD (acornscsi_queuecmd) -/* -* Prototype: void acornscsi_reportstatus(struct scsi_cmnd **SCpntp1, struct scsi_cmnd **SCpntp2, int result) -* Purpose : pass a result to *SCpntp1, and check if *SCpntp1 = *SCpntp2 -* Params : SCpntp1 - pointer to command to return -* SCpntp2 - pointer to command to check -* result - result to pass back to mid-level done function -* Returns : *SCpntp2 = NULL if *SCpntp1 is the same command structure as *SCpntp2. -*/ -static inline void acornscsi_reportstatus(struct scsi_cmnd **SCpntp1, -struct scsi_cmnd **SCpntp2, -int result) -{ -struct scsi_cmnd *SCpnt = *SCpntp1; - -if (SCpnt) { - *SCpntp1 =NULL ; - - SCpnt->result = result; - SCpnt->scsi_done (SCpnt); - } - -if (SCpnt == *SCpntp2) - *SCpntp2 =NULL ; -} - enum res_abort { res_not_running, res_success, res_success_clear, res_snooze };/*
Signature · 1 line
2.29.2
PATCH v3 23/40 nsp32: whitespace cleanup
In reply to Hannes Reinecke--- drivers/scsi/nsp32.c | 415 +++++++++++++++++++++++-------------------- 1 file changed, 221 insertions(+), 194 deletions(-)
drivers/scsi/nsp32.c +221 -194
@@ -176,38 +176,40 @@ static nsp32_sync_table nsp32_sync_table_pci[] = {* function declaration */ /* module entry point */ -static int nsp32_probe (struct pci_dev *,const struct pci_device_id *); -static void nsp32_remove (struct pci_dev *); +static int nsp32_probe (struct pci_dev *,const struct pci_device_id *); +static void nsp32_remove (struct pci_dev *);static int __init init_nsp32 (void ); static void __exit exit_nsp32 (void);/* struct struct scsi_host_template */ -static int nsp32_show_info (struct seq_file *,struct Scsi_Host *); +static int nsp32_show_info (struct seq_file *,struct Scsi_Host *); -static int nsp32_detect (struct pci_dev *pdev); -static int nsp32_queuecommand (struct Scsi_Host *,struct scsi_cmnd *); -static const char *nsp32_info (struct Scsi_Host *); -static int nsp32_release (struct Scsi_Host *); +static int nsp32_detect (struct pci_dev *pdev); +static int nsp32_queuecommand (struct Scsi_Host *,struct scsi_cmnd *); +static const char *nsp32_info (struct Scsi_Host *); +static int nsp32_release (struct Scsi_Host *);/* SCSI error handler */ -static int nsp32_eh_abort (struct scsi_cmnd *); -static int nsp32_eh_host_reset (struct scsi_cmnd *); +static int nsp32_eh_abort (struct scsi_cmnd *); +static int nsp32_eh_host_reset (struct scsi_cmnd *);/* generate SCSI message */ static void nsp32_build_identify (struct scsi_cmnd *);static void nsp32_build_nop (struct scsi_cmnd *);static void nsp32_build_reject (struct scsi_cmnd *); -static void nsp32_build_sdtr (struct scsi_cmnd *,unsigned char ,unsigned char ); +static void nsp32_build_sdtr (struct scsi_cmnd *,unsigned char , +unsigned char );/* SCSI message handler */ static int nsp32_busfree_occur (struct scsi_cmnd *,unsigned short );static void nsp32_msgout_occur (struct scsi_cmnd *); -static void nsp32_msgin_occur (struct scsi_cmnd *,unsigned long ,unsigned short ); +static void nsp32_msgin_occur (struct scsi_cmnd *,unsigned long , +unsigned short );static int nsp32_setup_sg_table (struct scsi_cmnd *);static int nsp32_selection_autopara (struct scsi_cmnd *);static int nsp32_selection_autoscsi (struct scsi_cmnd *); -static void nsp32_scsi_done (struct scsi_cmnd *); +static void nsp32_scsi_done (struct scsi_cmnd *);static int nsp32_arbitration (struct scsi_cmnd *,unsigned int );static int nsp32_reselection (struct scsi_cmnd *,unsigned char );static void nsp32_adjust_busfree (struct scsi_cmnd *,unsigned int );
@@ -215,10 +217,13 @@ static void nsp32_restart_autoscsi (struct scsi_cmnd *, unsigned short);/* SCSI SDTR */ static void nsp32_analyze_sdtr (struct scsi_cmnd *); -static int nsp32_search_period_entry (nsp32_hw_data *,nsp32_target *,unsigned char ); -static void nsp32_set_async (nsp32_hw_data *,nsp32_target *); -static void nsp32_set_max_sync (nsp32_hw_data *,nsp32_target *,unsigned char *,unsigned char *); -static void nsp32_set_sync_entry (nsp32_hw_data *,nsp32_target *,int ,unsigned char ); +static int nsp32_search_period_entry (nsp32_hw_data *,nsp32_target *, +unsigned char ); +static void nsp32_set_async (nsp32_hw_data *,nsp32_target *); +static void nsp32_set_max_sync (nsp32_hw_data *,nsp32_target *, +unsigned char *,unsigned char *); +static void nsp32_set_sync_entry (nsp32_hw_data *,nsp32_target *, +int ,unsigned char );/* SCSI bus status handler */ static void nsp32_wait_req (nsp32_hw_data *,int );
@@ -234,16 +239,16 @@ static irqreturn_t do_nsp32_isr(int, void *);static int nsp32hw_init (nsp32_hw_data *);/* EEPROM handler */ -static int nsp32_getprom_param (nsp32_hw_data *); -static int nsp32_getprom_at24 (nsp32_hw_data *); -static int nsp32_getprom_c16 (nsp32_hw_data *); -static void nsp32_prom_start (nsp32_hw_data *); -static void nsp32_prom_stop (nsp32_hw_data *); -static int nsp32_prom_read (nsp32_hw_data *,int ); -static int nsp32_prom_read_bit (nsp32_hw_data *); -static void nsp32_prom_write_bit (nsp32_hw_data *,int ); -static void nsp32_prom_set (nsp32_hw_data *,int ,int ); -static int nsp32_prom_get (nsp32_hw_data *,int ); +static int nsp32_getprom_param (nsp32_hw_data *); +static int nsp32_getprom_at24 (nsp32_hw_data *); +static int nsp32_getprom_c16 (nsp32_hw_data *); +static void nsp32_prom_start (nsp32_hw_data *); +static void nsp32_prom_stop (nsp32_hw_data *); +static int nsp32_prom_read (nsp32_hw_data *,int ); +static int nsp32_prom_read_bit (nsp32_hw_data *); +static void nsp32_prom_write_bit (nsp32_hw_data *,int ); +static void nsp32_prom_set (nsp32_hw_data *,int ,int ); +static int nsp32_prom_get (nsp32_hw_data *,int );/* debug/warning/info message */ static void nsp32_message (const char *,int ,char *,char *, ...);
@@ -356,8 +361,8 @@ static void nsp32_dmessage(const char *func, int line, int mask, char *fmt, ...)static void nsp32_build_identify (struct scsi_cmnd *SCpnt) {nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; -int pos = data->msgout_len; -int mode = FALSE; +int pos = data->msgout_len; +int mode = FALSE;/* XXX: Auto DiscPriv detection is progressing... */ if (disc_priv ==0 ) {
@@ -377,13 +382,13 @@ static void nsp32_build_sdtr(struct scsi_cmnd *SCpnt, unsigned char offset) {nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; -int pos = data->msgout_len; +int pos = data->msgout_len; data->msgoutbuf[pos] =EXTENDED_MESSAGE ; pos++; data->msgoutbuf[pos] =EXTENDED_SDTR_LEN ; pos++; data->msgoutbuf[pos] =EXTENDED_SDTR ; pos++; - data->msgoutbuf[pos] = period; pos++; - data->msgoutbuf[pos] = offset; pos++; + data->msgoutbuf[pos] = period; pos++; + data->msgoutbuf[pos] = offset; pos++; data->msgout_len = pos; }
@@ -394,7 +399,7 @@ static void nsp32_build_sdtr(struct scsi_cmnd *SCpnt,static void nsp32_build_nop (struct scsi_cmnd *SCpnt) {nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; -int pos = data->msgout_len; +int pos = data->msgout_len;if (pos !=0 ) { nsp32_msg(KERN_WARNING,
@@ -412,12 +417,12 @@ static void nsp32_build_nop(struct scsi_cmnd *SCpnt)static void nsp32_build_reject (struct scsi_cmnd *SCpnt) {nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; -int pos = data->msgout_len; +int pos = data->msgout_len; data->msgoutbuf[pos] =MESSAGE_REJECT ; pos++; data->msgout_len = pos; } - +/* * timer */
@@ -450,7 +455,7 @@ static int nsp32_selection_autopara(struct scsi_cmnd *SCpnt)unsigned char phase;int i, ret;unsigned int msgout; -u16_le s; +u16_le s;nsp32_dbg (NSP32_DEBUG_AUTOSCSI ,"in" );
@@ -482,7 +487,7 @@ static int nsp32_selection_autopara(struct scsi_cmnd *SCpnt)* the sending order of the message is: * MCNT 3: MSG#0 -> MSG#1 -> MSG#2 * MCNT 2: MSG#1 -> MSG#2 -* MCNT 1: MSG#2 +* MCNT 1: MSG#2 */ msgout >>=8 ; msgout |= ((unsigned int )(data->msgoutbuf[i]) <<24 );
@@ -494,7 +499,8 @@ static int nsp32_selection_autopara(struct scsi_cmnd *SCpnt) msgout =0 ; } -// nsp_dbg(NSP32_DEBUG_AUTOSCSI, "sel time out=0x%x\n", nsp32_read2(base, SEL_TIME_OUT)); +// nsp_dbg(NSP32_DEBUG_AUTOSCSI, "sel time out=0x%x\n", +// nsp32_read2(base, SEL_TIME_OUT)); // nsp32_write2(base, SEL_TIME_OUT, SEL_TIMEOUT_TIME); /*
@@ -520,10 +526,10 @@ static int nsp32_selection_autopara(struct scsi_cmnd *SCpnt)/* command control */ param->command_control =cpu_to_le16 (CLEAR_CDB_FIFO_POINTER | -AUTOSCSI_START | -AUTO_MSGIN_00_OR_04 | -AUTO_MSGIN_02 | -AUTO_ATN ); +AUTOSCSI_START | +AUTO_MSGIN_00_OR_04 | +AUTO_MSGIN_02 | +AUTO_ATN );/* transfer control */
@@ -555,9 +561,9 @@ static int nsp32_selection_autopara(struct scsi_cmnd *SCpnt)/* * transfer parameter to ASIC */ -nsp32_write4 (base,SGT_ADR , data->auto_paddr); -nsp32_write2 (base,COMMAND_CONTROL ,CLEAR_CDB_FIFO_POINTER | -AUTO_PARAMETER ); +nsp32_write4 (base,SGT_ADR , data->auto_paddr); +nsp32_write2 (base,COMMAND_CONTROL , +CLEAR_CDB_FIFO_POINTER |AUTO_PARAMETER );/* * Check arbitration
@@ -599,7 +605,7 @@ static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt) SCpnt->result =DID_BUS_BUSY <<16 ; status =1 ; goto out; - } + }/* * clear execph
@@ -616,13 +622,14 @@ static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt)*/ for (i =0 ; i < SCpnt->cmd_len; i++) {nsp32_write1 (base,COMMAND_DATA , SCpnt->cmnd[i]); - } + }nsp32_dbg (NSP32_DEBUG_CDB_CONTENTS ,"CDB[0]=[0x%x]" , SCpnt->cmnd[0 ]);/* * set SCSIOUT LATCH(initiator)/TARGET(target) (OR-ed) ID */ -nsp32_write1 (base,SCSI_OUT_LATCH_TARGET_ID ,BIT (host_id) |BIT (target)); +nsp32_write1 (base,SCSI_OUT_LATCH_TARGET_ID , +BIT (host_id) |BIT (target));/* * set SCSI MSGOUT REG
@@ -642,7 +649,7 @@ static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt)* the sending order of the message is: * MCNT 3: MSG#0 -> MSG#1 -> MSG#2 * MCNT 2: MSG#1 -> MSG#2 -* MCNT 1: MSG#2 +* MCNT 1: MSG#2 */ msgout >>=8 ; msgout |= ((unsigned int )(data->msgoutbuf[i]) <<24 );
@@ -662,7 +669,7 @@ static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt)/* * set SREQ hazard killer sampling rate -* +* * TODO: sample_rate (BASE+0F) is 0 when internal clock = 40MHz. * check other internal clock! */
@@ -687,7 +694,8 @@ static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt)nsp32_dbg (NSP32_DEBUG_AUTOSCSI ,"syncreg=0x%x, ackwidth=0x%x, sgtpaddr=0x%x, id=0x%x" ,nsp32_read1 (base,SYNC_REG ),nsp32_read1 (base,ACK_WIDTH ), -nsp32_read4 (base,SGT_ADR ),nsp32_read1 (base,SCSI_OUT_LATCH_TARGET_ID )); +nsp32_read4 (base,SGT_ADR ), +nsp32_read1 (base,SCSI_OUT_LATCH_TARGET_ID ));nsp32_dbg (NSP32_DEBUG_AUTOSCSI ,"msgout_len=%d, msgout=0x%x" , data->msgout_len, msgout);
@@ -716,10 +724,10 @@ static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt)* start AUTO SCSI, kick off arbitration */ command = (CLEAR_CDB_FIFO_POINTER | -AUTOSCSI_START | +AUTOSCSI_START |AUTO_MSGIN_00_OR_04 | -AUTO_MSGIN_02 | -AUTO_ATN ); +AUTO_MSGIN_02 | +AUTO_ATN );nsp32_write2 (base,COMMAND_CONTROL , command);/*
@@ -739,9 +747,9 @@ static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt)/* * Arbitration Status Check -* +* * Note: Arbitration counter is waited during ARBIT_GO is not lifting. -* Using udelay(1) consumes CPU time and system time, but +* Using udelay(1) consumes CPU time and system time, but * arbitration delay time is defined minimal 2.4us in SCSI * specification, thus udelay works as coarse grained wait timer. */
@@ -776,7 +784,7 @@ static int nsp32_arbitration(struct scsi_cmnd *SCpnt, unsigned int base)nsp32_dbg (NSP32_DEBUG_AUTOSCSI ,"arbit timeout" ); SCpnt->result =DID_NO_CONNECT <<16 ; status = FALSE; - } + }/* * clear Arbit
@@ -822,7 +830,8 @@ static int nsp32_reselection(struct scsi_cmnd *SCpnt, unsigned char newlun)* or current nexus is not existed, unexpected * reselection is occurred. Send reject message. */ -if (newid >=ARRAY_SIZE (data->lunt) || newlun >=ARRAY_SIZE (data->lunt[0 ])) { +if (newid >=ARRAY_SIZE (data->lunt) || + newlun >=ARRAY_SIZE (data->lunt[0 ])) {nsp32_msg (KERN_WARNING ,"unknown id/lun" );return FALSE; }else if (data->lunt[newid][newlun].SCpnt ==NULL ) {
@@ -876,7 +885,8 @@ static int nsp32_setup_sg_table(struct scsi_cmnd *SCpnt)if (le32_to_cpu (sgt[i].len) >0x10000 ) {nsp32_msg (KERN_ERR , -"can't transfer over 64KB at a time, size=0x%x" ,le32_to_cpu (sgt[i].len)); +"can't transfer over 64KB at a time, " +"size=0x%lx" ,le32_to_cpu (sgt[i].len));return FALSE; } nsp32_dbg(NSP32_DEBUG_SGLIST,
@@ -894,7 +904,8 @@ static int nsp32_setup_sg_table(struct scsi_cmnd *SCpnt)return TRUE; } -static int nsp32_queuecommand_lck (struct scsi_cmnd *SCpnt,void (*done)(struct scsi_cmnd *)) +static int nsp32_queuecommand_lck (struct scsi_cmnd *SCpnt, +void (*done)(struct scsi_cmnd *)) {nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;nsp32_target *target;
@@ -904,8 +915,9 @@ static int nsp32_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct snsp32_dbg (NSP32_DEBUG_QUEUECOMMAND ,"enter. target: 0x%x LUN: 0x%llx cmnd: 0x%x cmndlen: 0x%x " "use_sg: 0x%x reqbuf: 0x%lx reqlen: 0x%x" , - SCpnt->device->id, SCpnt->device->lun, SCpnt->cmnd[0 ], SCpnt->cmd_len, -scsi_sg_count (SCpnt),scsi_sglist (SCpnt),scsi_bufflen (SCpnt)); + SCpnt->device->id, SCpnt->device->lun, SCpnt->cmnd[0 ], + SCpnt->cmd_len,scsi_sg_count (SCpnt),scsi_sglist (SCpnt), +scsi_bufflen (SCpnt));if (data->CurrentSC !=NULL ) {nsp32_msg (KERN_ERR ,"Currentsc != NULL. Cancel this command request" );
@@ -966,7 +978,7 @@ static int nsp32_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct s/* Build IDENTIFY */ nsp32_build_identify (SCpnt); -/* +/* * If target is the first time to transfer after the reset * (target don't have SDTR_DONE and SDTR_INITIATOR), sync * message SDTR is needed to do synchronous transfer.
@@ -1051,9 +1063,9 @@ static int nsp32hw_init(nsp32_hw_data *data)nsp32_index_write2 (base,CFG_LATE_CACHE , lc_reg &0xffff ); } -nsp32_write2 (base,IRQ_CONTROL ,IRQ_CONTROL_ALL_IRQ_MASK ); -nsp32_write2 (base,TRANSFER_CONTROL ,0 ); -nsp32_write4 (base,BM_CNT ,0 ); +nsp32_write2 (base,IRQ_CONTROL ,IRQ_CONTROL_ALL_IRQ_MASK ); +nsp32_write2 (base,TRANSFER_CONTROL ,0 ); +nsp32_write4 (base,BM_CNT ,0 );nsp32_write2 (base,SCSI_EXECUTE_PHASE ,0 ); do {
@@ -1081,12 +1093,13 @@ static int nsp32hw_init(nsp32_hw_data *data) nsp32_index_read1(base, FIFO_EMPTY_SHLD_COUNT));nsp32_index_write1 (base,CLOCK_DIV , data->clock); -nsp32_index_write1 (base,BM_CYCLE ,MEMRD_CMD1 |SGT_AUTO_PARA_MEMED_CMD ); +nsp32_index_write1 (base,BM_CYCLE , +MEMRD_CMD1 |SGT_AUTO_PARA_MEMED_CMD );nsp32_write1 (base,PARITY_CONTROL ,0 );/* parity check is disable */ /* * initialize MISC_WRRD register -* +* * Note: Designated parameters is obeyed as following: * MISC_SCSI_DIRECTION_DETECTOR_SELECT: It must be set. * MISC_MASTER_TERMINATION_SELECT: It must be set.
@@ -1101,10 +1114,10 @@ static int nsp32hw_init(nsp32_hw_data *data)*/ nsp32_index_write2 (base,MISC_WR , (SCSI_DIRECTION_DETECTOR_SELECT | -DELAYED_BMSTART | -MASTER_TERMINATION_SELECT | -BMREQ_NEGATE_TIMING_SEL | -AUTOSEL_TIMING_SEL | +DELAYED_BMSTART | +MASTER_TERMINATION_SELECT | +BMREQ_NEGATE_TIMING_SEL | +AUTOSEL_TIMING_SEL |BMSTOP_CHANGE2_NONDATA_PHASE ));nsp32_index_write1 (base,TERM_PWR_CONTROL ,0 );
@@ -1125,15 +1138,16 @@ static int nsp32hw_init(nsp32_hw_data *data)* enable to select designated IRQ (except for * IRQSELECT_SERR, IRQSELECT_PERR, IRQSELECT_BMCNTERR) */ -nsp32_index_write2 (base,IRQ_SELECT ,IRQSELECT_TIMER_IRQ | -IRQSELECT_SCSIRESET_IRQ | -IRQSELECT_FIFO_SHLD_IRQ | -IRQSELECT_RESELECT_IRQ | -IRQSELECT_PHASE_CHANGE_IRQ | -IRQSELECT_AUTO_SCSI_SEQ_IRQ | -// IRQSELECT_BMCNTERR_IRQ | -IRQSELECT_TARGET_ABORT_IRQ | -IRQSELECT_MASTER_ABORT_IRQ ); +nsp32_index_write2 (base,IRQ_SELECT , +IRQSELECT_TIMER_IRQ | +IRQSELECT_SCSIRESET_IRQ | +IRQSELECT_FIFO_SHLD_IRQ | +IRQSELECT_RESELECT_IRQ | +IRQSELECT_PHASE_CHANGE_IRQ | +IRQSELECT_AUTO_SCSI_SEQ_IRQ | +// IRQSELECT_BMCNTERR_IRQ | +IRQSELECT_TARGET_ABORT_IRQ | +IRQSELECT_MASTER_ABORT_IRQ );nsp32_write2 (base,IRQ_CONTROL ,0 );/* PCI LED off */
@@ -1163,11 +1177,12 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)* IRQ check, then enable IRQ mask */ irq_stat =nsp32_read2 (base,IRQ_STATUS ); -nsp32_dbg (NSP32_DEBUG_INTR , +nsp32_dbg (NSP32_DEBUG_INTR ,"enter IRQ: %d, IRQstatus: 0x%x" , irq, irq_stat);/* is this interrupt comes from Ninja asic? */ if ((irq_stat &IRQSTATUS_ANY_IRQ ) ==0 ) { -nsp32_dbg (NSP32_DEBUG_INTR ,"shared interrupt: irq other 0x%x" , irq_stat); +nsp32_dbg (NSP32_DEBUG_INTR , +"shared interrupt: irq other 0x%x" , irq_stat); goto out2; } handled =1 ;
@@ -1207,7 +1222,8 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)if (SCpnt ==NULL ) {nsp32_msg (KERN_WARNING ,"SCpnt==NULL this can't be happened" ); -nsp32_msg (KERN_WARNING ,"irq_stat=0x%x trans_stat=0x%x" , irq_stat, trans_stat); +nsp32_msg (KERN_WARNING ,"irq_stat=0x%x trans_stat=0x%x" , + irq_stat, trans_stat); goto out; }
@@ -1265,13 +1281,13 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id) "Data in/out phase processed");/* read BMCNT, SGT pointer addr */ -nsp32_dbg (NSP32_DEBUG_INTR ,"BMCNT=0x%lx" , +nsp32_dbg (NSP32_DEBUG_INTR ,"BMCNT=0x%lx" ,nsp32_read4 (base,BM_CNT )); -nsp32_dbg (NSP32_DEBUG_INTR ,"addr=0x%lx" , +nsp32_dbg (NSP32_DEBUG_INTR ,"addr=0x%lx" ,nsp32_read4 (base,SGT_ADR )); -nsp32_dbg (NSP32_DEBUG_INTR ,"SACK=0x%lx" , +nsp32_dbg (NSP32_DEBUG_INTR ,"SACK=0x%lx" ,nsp32_read4 (base,SACK_CNT )); -nsp32_dbg (NSP32_DEBUG_INTR ,"SSACK=0x%lx" , +nsp32_dbg (NSP32_DEBUG_INTR ,"SSACK=0x%lx" ,nsp32_read4 (base,SAVED_SACK_CNT ));scsi_set_resid (SCpnt,0 );/* all data transferred! */
@@ -1306,7 +1322,7 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)* Read CSB and substitute CSB for SCpnt->result * to save status phase stutas byte. * scsi error handler checks host_byte (DID_*: -* low level driver to indicate status), then checks +* low level driver to indicate status), then checks * status_byte (SCSI status byte). */ SCpnt->result = (int )nsp32_read1 (base,SCSI_CSB_IN );
@@ -1314,7 +1330,7 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)if (auto_stat &ILLEGAL_PHASE ) {/* Illegal phase is detected. SACK is not back. */ -nsp32_msg (KERN_WARNING , +nsp32_msg (KERN_WARNING ,"AUTO SCSI ILLEGAL PHASE OCCUR!!!!" );/* TODO: currently we don't have any action... bus reset? */
@@ -1367,7 +1383,8 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)break ;default :nsp32_dbg (NSP32_DEBUG_INTR ,"fifo/other phase" ); -nsp32_dbg (NSP32_DEBUG_INTR ,"irq_stat=0x%x trans_stat=0x%x" , irq_stat, trans_stat); +nsp32_dbg (NSP32_DEBUG_INTR ,"irq_stat=0x%x trans_stat=0x%x" , + irq_stat, trans_stat);show_busphase (busphase);break ; }
@@ -1433,32 +1450,39 @@ static int nsp32_show_info(struct seq_file *m, struct Scsi_Host *host) {unsigned long flags;nsp32_hw_data *data; -int hostno; +int hostno;unsigned int base;unsigned char mode_reg; -int id, speed; -long model; +int id, speed; +long model; hostno = host->host_no; data = (nsp32_hw_data *)host->hostdata; base = host->io_port;seq_puts (m,"NinjaSCSI-32 status\n\n" ); -seq_printf (m,"Driver version: %s, $Revision: 1.33 $\n" , nsp32_release_version); -seq_printf (m,"SCSI host No.: %d\n" , hostno); -seq_printf (m,"IRQ: %d\n" , host->irq); -seq_printf (m,"IO: 0x%lx-0x%lx\n" , host->io_port, host->io_port + host->n_io_port -1 ); -seq_printf (m,"MMIO(virtual address): 0x%lx-0x%lx\n" , host->base, host->base + data->MmioLength -1 ); -seq_printf (m,"sg_tablesize: %d\n" , host->sg_tablesize); -seq_printf (m,"Chip revision: 0x%x\n" , (nsp32_read2 (base,INDEX_REG ) >>8 ) &0xff ); +seq_printf (m,"Driver version: %s, $Revision: 1.33 $\n" , + nsp32_release_version); +seq_printf (m,"SCSI host No.: %d\n" , hostno); +seq_printf (m,"IRQ: %d\n" , host->irq); +seq_printf (m,"IO: 0x%lx-0x%lx\n" , + host->io_port, host->io_port + host->n_io_port -1 ); +seq_printf (m,"MMIO(virtual address): 0x%lx-0x%lx\n" , + host->base, host->base + data->MmioLength -1 ); +seq_printf (m,"sg_tablesize: %d\n" , + host->sg_tablesize); +seq_printf (m,"Chip revision: 0x%x\n" , + (nsp32_read2 (base,INDEX_REG ) >>8 ) &0xff ); mode_reg =nsp32_index_read1 (base,CHIP_MODE ); model = data->pci_devid->driver_data;#ifdef CONFIG_PM -seq_printf (m,"Power Management: %s\n" , (mode_reg &OPTF ) ?"yes" :"no" ); +seq_printf (m,"Power Management: %s\n" , + (mode_reg &OPTF ) ?"yes" :"no" );#endif -seq_printf (m,"OEM: %ld, %s\n" , (mode_reg & (OEM0 |OEM1 )), nsp32_model[model]); +seq_printf (m,"OEM: %ld, %s\n" , + (mode_reg & (OEM0 |OEM1 )), nsp32_model[model]);spin_lock_irqsave (&(data->Lock), flags);seq_printf (m,"CurrentSC: 0x%p\n\n" , data->CurrentSC);
@@ -1476,7 +1500,7 @@ static int nsp32_show_info(struct seq_file *m, struct Scsi_Host *host) }if (data->target[id].sync_flag ==SDTR_DONE ) { -if (data->target[id].period ==0 && +if (data->target[id].period ==0 && data->target[id].offset ==ASYNC_OFFSET ) {seq_puts (m,"async" ); }else {
@@ -1518,7 +1542,7 @@ static void nsp32_scsi_done(struct scsi_cmnd *SCpnt)* clear TRANSFERCONTROL_BM_START */ nsp32_write2 (base,TRANSFER_CONTROL ,0 ); -nsp32_write4 (base,BM_CNT ,0 ); +nsp32_write4 (base,BM_CNT ,0 );/* * call scsi_done
@@ -1528,10 +1552,10 @@ static void nsp32_scsi_done(struct scsi_cmnd *SCpnt)/* * reset parameters */ - data->cur_lunt->SCpnt =NULL ; - data->cur_lunt =NULL ; - data->cur_target =NULL ; - data->CurrentSC =NULL ; + data->cur_lunt->SCpnt =NULL ; + data->cur_lunt =NULL ; + data->cur_target =NULL ; + data->CurrentSC =NULL ; }
@@ -1553,7 +1577,7 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)nsp32_dbg (NSP32_DEBUG_BUSFREE ,"enter execph=0x%x" , execph);show_autophase (execph); -nsp32_write4 (base,BM_CNT ,0 ); +nsp32_write4 (base,BM_CNT ,0 );nsp32_write2 (base,TRANSFER_CONTROL ,0 );/*
@@ -1561,7 +1585,7 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)* * VALID: * Save Data Pointer is received. Adjust pointer. -* +* * NO-VALID: * SCSI-3 says if Save Data Pointer is not received, then we restart * processing and we can't adjust any SCSI data pointer in next data
@@ -1574,7 +1598,7 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)* Check sack_cnt/saved_sack_cnt, then adjust sg table if * needed. */ -if (!(execph &MSGIN_00_VALID ) && +if (!(execph &MSGIN_00_VALID ) && ((execph &DATA_IN_PHASE ) || (execph &DATA_OUT_PHASE ))) {unsigned int sacklen, s_sacklen;
@@ -1617,7 +1641,7 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)* no processing. */ } - +if (execph &MSGIN_03_VALID ) {/* MsgIn03 was valid to be processed. No need processing. */ }
@@ -1639,7 +1663,7 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)* negotiating. */ if (execph & (MSGIN_00_VALID |MSGIN_04_VALID )) { -/* +/* * If valid message is received, then * negotiation is succeeded. */
@@ -1667,12 +1691,12 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph) SCpnt->SCp.Status =nsp32_read1 (base,SCSI_CSB_IN ); SCpnt->SCp.Message =0 ; -nsp32_dbg (NSP32_DEBUG_BUSFREE , +nsp32_dbg (NSP32_DEBUG_BUSFREE ,"normal end stat=0x%x resid=0x%x\n" , SCpnt->SCp.Status,scsi_get_resid (SCpnt)); - SCpnt->result = (DID_OK <<16 ) | - (SCpnt->SCp.Message <<8 ) | - (SCpnt->SCp.Status <<0 ); + SCpnt->result = (DID_OK <<16 ) | + (SCpnt->SCp.Message <<8 ) | + (SCpnt->SCp.Status <<0 );nsp32_scsi_done (SCpnt);/* All operation is done */ return TRUE;
@@ -1680,7 +1704,7 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)/* MsgIn 04: Disconnect */ SCpnt->SCp.Status =nsp32_read1 (base,SCSI_CSB_IN ); SCpnt->SCp.Message =4 ; - +nsp32_dbg (NSP32_DEBUG_BUSFREE ,"disconnect" );return TRUE; }else {
@@ -1706,12 +1730,12 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)static void nsp32_adjust_busfree (struct scsi_cmnd *SCpnt,unsigned int s_sacklen) {nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; -int old_entry = data->cur_entry; -int new_entry; -int sg_num = data->cur_lunt->sg_num; -nsp32_sgtable *sgt = data->cur_lunt->sglun->sgt; -unsigned int restlen, sentlen; -u32_le len, addr; +int old_entry = data->cur_entry; +int new_entry; +int sg_num = data->cur_lunt->sg_num; +nsp32_sgtable *sgt = data->cur_lunt->sglun->sgt; +unsigned int restlen, sentlen; +u32_le len, addr;nsp32_dbg (NSP32_DEBUG_SGLIST ,"old resid=0x%x" ,scsi_get_resid (SCpnt));
@@ -1719,7 +1743,7 @@ static void nsp32_adjust_busfree(struct scsi_cmnd *SCpnt, unsigned int s_sacklen s_sacklen -=le32_to_cpu (sgt[old_entry].addr) &3 ;/* -* calculate new_entry from sack count and each sgt[].len +* calculate new_entry from sack count and each sgt[].len * calculate the byte which is intent to send */ sentlen =0 ;
@@ -1737,8 +1761,10 @@ static void nsp32_adjust_busfree(struct scsi_cmnd *SCpnt, unsigned int s_sacklenif (sentlen == s_sacklen) {/* XXX: confirm it's ok or not */ -/* In this case, it's ok because we are at -the head element of the sg. restlen is correctly calculated. */ +/* In this case, it's ok because we are at +* the head element of the sg. restlen is correctly +* calculated. +*/ }/* calculate the rest length for transferring */
@@ -1753,7 +1779,7 @@ static void nsp32_adjust_busfree(struct scsi_cmnd *SCpnt, unsigned int s_sacklen/* set cur_entry with new_entry */ data->cur_entry = new_entry; - +return ; last:
@@ -1781,7 +1807,7 @@ static void nsp32_msgout_occur(struct scsi_cmnd *SCpnt)nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;unsigned int base = SCpnt->device->host->io_port;int i; - +nsp32_dbg (NSP32_DEBUG_MSGOUTOCCUR ,"enter: msgout_len: 0x%x" , data->msgout_len);
@@ -1815,10 +1841,10 @@ static void nsp32_msgout_occur(struct scsi_cmnd *SCpnt)//nsp32_restart_autoscsi(SCpnt, command); nsp32_write2 (base,COMMAND_CONTROL , (CLEAR_CDB_FIFO_POINTER | -AUTO_COMMAND_PHASE | -AUTOSCSI_RESTART | -AUTO_MSGIN_00_OR_04 | -AUTO_MSGIN_02 )); +AUTO_COMMAND_PHASE | +AUTOSCSI_RESTART | +AUTO_MSGIN_00_OR_04 | +AUTO_MSGIN_02 )); }/* * Write data with SACK, then wait sack is
@@ -1918,9 +1944,9 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,unsigned char msgtype;unsigned char newlun;unsigned short command =0 ; -int msgclear = TRUE; -long new_sgtp; -int ret; +int msgclear = TRUE; +long new_sgtp; +int ret;/* * read first message
@@ -1960,7 +1986,7 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt, goto reject; } } - +/* * processing messages except for IDENTIFY *
@@ -1976,10 +2002,10 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,* These messages should not be occurred. * They should be processed on AutoSCSI sequencer. */ -nsp32_msg (KERN_WARNING , +nsp32_msg (KERN_WARNING ,"unexpected message of AutoSCSI MsgIn: 0x%x" , msg);break ; - +case RESTORE_POINTERS :/* * AutoMsgIn03 is disabled, and HBA gets this message.
@@ -2005,7 +2031,7 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,/* * set new sg pointer */ - new_sgtp = data->cur_lunt->sglun_paddr + + new_sgtp = data->cur_lunt->sglun_paddr + (data->cur_lunt->cur_entry *sizeof (nsp32_sgtable));nsp32_write4 (base,SGT_ADR , new_sgtp);
@@ -2016,13 +2042,13 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,* These messages should not be occurred. * They should be processed on AutoSCSI sequencer. */ -nsp32_msg (KERN_WARNING , +nsp32_msg (KERN_WARNING ,"unexpected message of AutoSCSI MsgIn: SAVE_POINTERS" ); - +break ; - +case MESSAGE_REJECT : -/* If previous message_out is sending SDTR, and get +/* If previous message_out is sending SDTR, and get message_reject from target, SDTR negotiation is failed */ if (data->cur_target->sync_flag & (SDTR_INITIATOR |SDTR_TARGET )) {
@@ -2041,7 +2067,7 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,case LINKED_CMD_COMPLETE :case LINKED_FLG_CMD_COMPLETE :/* queue tag is not supported currently */ -nsp32_msg (KERN_WARNING , +nsp32_msg (KERN_WARNING ,"unsupported message: 0x%x" , msgtype);break ;
@@ -2094,7 +2120,7 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt, }/* -* Reach here means regular length of each type of +* Reach here means regular length of each type of * extended messages. */ switch (data->msginbuf[2 ]) {
@@ -2129,12 +2155,12 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt, goto reject;/* not implemented yet */ break ; - +default : goto reject; }break ; - +default : goto reject; }
@@ -2150,7 +2176,7 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,* AutoSCSI restart, at the same time MsgOutOccur should be * happened (however, such situation is really possible...?). */ -if (data->msgout_len >0 ) { +if (data->msgout_len >0 ) {nsp32_write4 (base,SCSI_MSG_OUT ,0 ); command |=AUTO_ATN ; }
@@ -2192,7 +2218,7 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,return ; reject: -nsp32_msg (KERN_WARNING , +nsp32_msg (KERN_WARNING ,"invalid or unsupported MessageIn, rejected. " "current msg: 0x%x (len: 0x%x), processing msg: 0x%x" , msg, data->msgin_len, msgtype);
@@ -2203,15 +2229,15 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt, }/* -* +* */ static void nsp32_analyze_sdtr (struct scsi_cmnd *SCpnt) {nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; -nsp32_target *target = data->cur_target; -unsigned char get_period = data->msginbuf[3 ]; -unsigned char get_offset = data->msginbuf[4 ]; -int entry; +nsp32_target *target = data->cur_target; +unsigned char get_period = data->msginbuf[3 ]; +unsigned char get_offset = data->msginbuf[4 ]; +int entry;nsp32_dbg (NSP32_DEBUG_MSGINOCCUR ,"enter" );
@@ -2219,16 +2245,16 @@ static void nsp32_analyze_sdtr(struct scsi_cmnd *SCpnt)* If this inititor sent the SDTR message, then target responds SDTR, * initiator SYNCREG, ACKWIDTH from SDTR parameter. * Messages are not appropriate, then send back reject message. -* If initiator did not send the SDTR, but target sends SDTR, +* If initiator did not send the SDTR, but target sends SDTR, * initiator calculator the appropriate parameter and send back SDTR. -*/ +*/ if (target->sync_flag &SDTR_INITIATOR ) {/* * Initiator sent SDTR, the target responds and * send back negotiation SDTR. */ nsp32_dbg (NSP32_DEBUG_MSGINOCCUR ,"target responds SDTR" ); - + target->sync_flag &= ~SDTR_INITIATOR ; target->sync_flag |=SDTR_DONE ;
@@ -2242,7 +2268,7 @@ static void nsp32_analyze_sdtr(struct scsi_cmnd *SCpnt)*/ goto reject; } - +if (get_offset ==ASYNC_OFFSET ) {/* * Negotiation is succeeded, the target want
@@ -2273,7 +2299,7 @@ static void nsp32_analyze_sdtr(struct scsi_cmnd *SCpnt)if (entry <0 ) {/* -* Target want to use long period which is not +* Target want to use long period which is not * acceptable NinjaSCSI-32Bi/UDE. */ goto reject;
@@ -2286,7 +2312,7 @@ static void nsp32_analyze_sdtr(struct scsi_cmnd *SCpnt) }else {/* Target send SDTR to initiator. */ nsp32_dbg (NSP32_DEBUG_MSGINOCCUR ,"target send SDTR" ); - + target->sync_flag |=SDTR_INITIATOR ;/* offset: */
@@ -2409,7 +2435,7 @@ static void nsp32_set_max_sync(nsp32_hw_data *data,*/ static void nsp32_set_sync_entry (nsp32_hw_data *data,nsp32_target *target, -int entry, +int entry,unsigned char offset) {unsigned char period, ackwidth, sample_rate;
@@ -2438,7 +2464,7 @@ static void nsp32_set_sync_entry(nsp32_hw_data *data,static void nsp32_wait_req (nsp32_hw_data *data,int state) {unsigned int base = data->BaseAddress; -int wait_time =0 ; +int wait_time =0 ;unsigned char bus, req_bit;if (!((state ==ASSERT ) || (state ==NEGATE ))) {
@@ -2450,7 +2476,7 @@ static void nsp32_wait_req(nsp32_hw_data *data, int state) do { bus = nsp32_read1(base, SCSI_BUS_MONITOR); if ((bus & BUSMON_REQ) == req_bit) { - nsp32_dbg(NSP32_DEBUG_WAIT, + nsp32_dbg(NSP32_DEBUG_WAIT, "wait_time: %d", wait_time); return; }
@@ -2467,7 +2493,7 @@ static void nsp32_wait_req(nsp32_hw_data *data, int state)static void nsp32_wait_sack (nsp32_hw_data *data,int state) {unsigned int base = data->BaseAddress; -int wait_time =0 ; +int wait_time =0 ;unsigned char bus, ack_bit;if (!((state ==ASSERT ) || (state ==NEGATE ))) {
@@ -2532,8 +2558,8 @@ static int nsp32_detect(struct pci_dev *pdev)struct Scsi_Host *host;/* registered host structure */ struct resource *res;nsp32_hw_data *data; -int ret; -int i, j; +int ret; +int i, j;nsp32_dbg (NSP32_DEBUG_REGISTER ,"enter" );
@@ -2610,7 +2636,7 @@ static int nsp32_detect(struct pci_dev *pdev)*/ /* -* setup DMA +* setup DMA */ if (dma_set_mask (&pdev->dev,DMA_BIT_MASK (32 )) !=0 ) {nsp32_msg (KERN_ERR ,"failed to set PCI DMA mask" );
@@ -2710,16 +2736,16 @@ static int nsp32_detect(struct pci_dev *pdev) goto free_sg_list; } -/* +/* * PCI IO register */ res =request_region (host->io_port, host->n_io_port,"nsp32" );if (res ==NULL ) { -nsp32_msg (KERN_ERR , +nsp32_msg (KERN_ERR ,"I/O region 0x%x+0x%x is already used" , data->BaseAddress, data->NumAddress); goto free_irq; - } + } ret =scsi_add_host (host, &pdev->dev);if (ret) {
@@ -2743,7 +2769,7 @@ static int nsp32_detect(struct pci_dev *pdev) free_autoparam:dma_free_coherent (&pdev->dev,sizeof (nsp32_autoparam), data->autoparam, data->auto_paddr); - + scsi_unregister:scsi_host_put (host);
@@ -2810,7 +2836,7 @@ static int nsp32_eh_abort(struct scsi_cmnd *SCpnt) }nsp32_write2 (base,TRANSFER_CONTROL ,0 ); -nsp32_write2 (base,BM_CNT ,0 ); +nsp32_write2 (base,BM_CNT ,0 ); SCpnt->result =DID_ABORT <<16 ;nsp32_scsi_done (SCpnt);
@@ -2833,8 +2859,8 @@ static void nsp32_do_bus_reset(nsp32_hw_data *data)* clear counter */ nsp32_write2 (base,TRANSFER_CONTROL ,0 ); -nsp32_write4 (base,BM_CNT ,0 ); -nsp32_write4 (base,CLR_COUNTER ,CLRCOUNTER_ALLMASK ); +nsp32_write4 (base,BM_CNT ,0 ); +nsp32_write4 (base,CLR_COUNTER ,CLRCOUNTER_ALLMASK );/* * fall back to asynchronous transfer mode
@@ -2856,7 +2882,7 @@ static void nsp32_do_bus_reset(nsp32_hw_data *data)for (i =0 ; i <5 ; i++) { intrdat =nsp32_read2 (base,IRQ_STATUS );/* dummy read */ nsp32_dbg (NSP32_DEBUG_BUSRESET ,"irq:1: 0x%x" , intrdat); - } + } data->CurrentSC =NULL ; }
@@ -2867,7 +2893,7 @@ static int nsp32_eh_host_reset(struct scsi_cmnd *SCpnt)unsigned int base = SCpnt->device->host->io_port;nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata; -nsp32_msg (KERN_INFO ,"Host Reset" ); +nsp32_msg (KERN_INFO ,"Host Reset" );nsp32_dbg (NSP32_DEBUG_BUSRESET ,"SCpnt=0x%x" , SCpnt);spin_lock_irq (SCpnt->device->host->host_lock);
@@ -2942,13 +2968,13 @@ static int nsp32_getprom_param(nsp32_hw_data *data)* AT24C01A (Logitec: LHA-600S), AT24C02 (Melco Buffalo: IFC-USLP) data map: * * ROMADDR -* 0x00 - 0x06 : Device Synchronous Transfer Period (SCSI ID 0 - 6) +* 0x00 - 0x06 : Device Synchronous Transfer Period (SCSI ID 0 - 6) * Value 0x0: ASYNC, 0x0c: Ultra-20M, 0x19: Fast-10M * 0x07 : HBA Synchronous Transfer Period * Value 0: AutoSync, 1: Manual Setting * 0x08 - 0x0f : Not Used? (0x0) * 0x10 : Bus Termination -* Value 0: Auto[ON], 1: ON, 2: OFF +* Value 0: Auto[ON], 1: ON, 2: OFF * 0x11 : Not Used? (0) * 0x12 : Bus Reset Delay Time (0x03) * 0x13 : Bootable CD Support
@@ -2956,7 +2982,7 @@ static int nsp32_getprom_param(nsp32_hw_data *data)* 0x14 : Device Scan * Bit 7 6 5 4 3 2 1 0 * | <-----------------> -* | SCSI ID: Value 0: Skip, 1: YES +* | SCSI ID: Value 0: Skip, 1: YES * |-> Value 0: ALL scan, Value 1: Manual * 0x15 - 0x1b : Not Used? (0) * 0x1c : Constant? (0x01) (clock div?)
@@ -2967,10 +2993,10 @@ static int nsp32_getprom_param(nsp32_hw_data *data)*/ static int nsp32_getprom_at24 (nsp32_hw_data *data) { -int ret, i; -int auto_sync; +int ret, i; +int auto_sync;nsp32_target *target; -int entry; +int entry;/* * Reset time which is designated by EEPROM.
@@ -3036,7 +3062,7 @@ static int nsp32_getprom_at24(nsp32_hw_data *data)* C16 110 (I-O Data: SC-NBD) data map: * * ROMADDR -* 0x00 - 0x06 : Device Synchronous Transfer Period (SCSI ID 0 - 6) +* 0x00 - 0x06 : Device Synchronous Transfer Period (SCSI ID 0 - 6) * Value 0x0: 20MB/S, 0x1: 10MB/S, 0x2: 5MB/S, 0x3: ASYNC * 0x07 : 0 (HBA Synchronous Transfer Period: Auto Sync) * 0x08 - 0x0f : Not Used? (0x0)
@@ -3044,7 +3070,7 @@ static int nsp32_getprom_at24(nsp32_hw_data *data)* Value 0: PIO, 1: Busmater * 0x11 : Bus Reset Delay Time (0x00-0x20) * 0x12 : Bus Termination -* Value 0: Disable, 1: Enable +* Value 0: Disable, 1: Enable * 0x13 - 0x19 : Disconnection * Value 0: Disable, 1: Enable * 0x1a - 0x7c : Not Used? (0)
@@ -3054,9 +3080,9 @@ static int nsp32_getprom_at24(nsp32_hw_data *data)*/ static int nsp32_getprom_c16 (nsp32_hw_data *data) { -int ret, i; +int ret, i;nsp32_target *target; -int entry, val; +int entry, val;/* * Reset time which is designated by EEPROM.
@@ -3156,7 +3182,7 @@ static int nsp32_prom_read(nsp32_hw_data *data, int romaddr)for (i =7 ; i >=0 ; i--) { val += (nsp32_prom_read_bit (data) << i); } - +/* no ack */ nsp32_prom_write_bit (data,1 );
@@ -3281,7 +3307,8 @@ static int nsp32_resume(struct pci_dev *pdev)nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata;unsigned short reg; -nsp32_msg (KERN_INFO ,"pci-resume: pdev=0x%p, slot=%s, host=0x%p" , pdev,pci_name (pdev), host); +nsp32_msg (KERN_INFO ,"pci-resume: pdev=0x%p, slot=%s, host=0x%p" , + pdev,pci_name (pdev), host);pci_set_power_state (pdev,PCI_D0 );pci_enable_wake (pdev,PCI_D0 ,0 );
@@ -3316,13 +3343,13 @@ static int nsp32_probe(struct pci_dev *pdev, const struct pci_device_id *id)nsp32_dbg (NSP32_DEBUG_REGISTER ,"enter" ); - ret =pci_enable_device (pdev); + ret =pci_enable_device (pdev);if (ret) {nsp32_msg (KERN_ERR ,"failed to enable pci device" );return ret; } - data->Pci = pdev; + data->Pci = pdev; data->pci_devid = id; data->IrqNumber = pdev->irq; data->BaseAddress =pci_resource_start (pdev,0 );
@@ -3351,7 +3378,7 @@ static void nsp32_remove(struct pci_dev *pdev)nsp32_dbg (NSP32_DEBUG_REGISTER ,"enter" ); -scsi_remove_host (host); +scsi_remove_host (host);nsp32_release (host);
@@ -3364,8 +3391,8 @@ static struct pci_driver nsp32_driver = { .probe = nsp32_probe, .remove = nsp32_remove, #ifdef CONFIG_PM - .suspend = nsp32_suspend, - .resume = nsp32_resume, + .suspend = nsp32_suspend, + .resume = nsp32_resume,#endif };
Signature · 1 line
2.29.2
PATCH v3 33/40 fas216: Use get_status_byte() to avoid using linux-specific status codes
In reply to Hannes ReineckeThe driver should be using the standard SAM_STAT_ values, and not the linux-specific ones.
--- drivers/scsi/arm/fas216.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/scsi/arm/fas216.c +3 -3
@@ -2060,15 +2060,15 @@ fas216_std_done(FAS216_Info *info, struct scsi_cmnd *SCpnt, unsigned int result)* If the command returned CHECK_CONDITION or COMMAND_TERMINATED * status, request the sense information. */ -if (status_byte (SCpnt->result) ==CHECK_CONDITION || -status_byte (SCpnt->result) ==COMMAND_TERMINATED ) +if (get_status_byte (SCpnt) ==SAM_STAT_CHECK_CONDITION || +get_status_byte (SCpnt) ==SAM_STAT_COMMAND_TERMINATED ) goto request_sense;/* * If the command did not complete with GOOD status, * we are all done here. */ -if (status_byte (SCpnt->result) !=GOOD ) +if (get_status_byte (SCpnt) !=SAM_STAT_GOOD ) goto done;/*
Signature · 1 line
2.29.2
PATCH v3 30/40 aha152x: do not set message byte when calling scsi_done()
In reply to Hannes ReineckeThe done() function is called with a host_byte indicating the actual error when the message byte is set. As the host byte takes precedence during error recovery we can drop setting the message byte if the host byte is set, too.
The only other case is when the host byte is DID_OK, but in that case the message byte is always COMMAND_COMPLETE (ie 0), so we can drop it there, too.
--- drivers/scsi/aha152x.c | 42 +++++++++++++++--------------------------- 1 file changed, 15 insertions(+), 27 deletions(-)
drivers/scsi/aha152x.c +15 -27
@@ -620,7 +620,7 @@ static irqreturn_t intr(int irq, void *dev_id);static void reset_ports (struct Scsi_Host *shpnt);static void aha152x_error (struct Scsi_Host *shpnt,char *msg);static void done (struct Scsi_Host *shpnt,unsigned char status_byte, -unsigned char msg_byte,unsigned char host_byte); +unsigned char host_byte);/* diagnostics */ static void show_command (struct scsi_cmnd * ptr);
@@ -1273,7 +1273,7 @@ static int aha152x_biosparam(struct scsi_device *sdev, struct block_device *bdev* */ static void done (struct Scsi_Host *shpnt,unsigned char status_byte, -unsigned char msg_byte,unsigned char host_byte) +unsigned char host_byte) {if (CURRENT_SC ) {if (DONE_SC )
@@ -1283,8 +1283,7 @@ static void done(struct Scsi_Host *shpnt, unsigned char status_byte,DONE_SC =CURRENT_SC ;CURRENT_SC =NULL ; -DONE_SC ->result = status_byte; -set_msg_byte (DONE_SC , msg_byte); +set_status_byte (DONE_SC , status_byte);set_host_byte (DONE_SC , host_byte); }else printk (KERN_ERR "aha152x: done() called outside of command\n" );
@@ -1380,16 +1379,13 @@ static void busfree_run(struct Scsi_Host *shpnt)if (CURRENT_SC ->SCp.phase & completed) {/* target sent COMMAND COMPLETE */ -done (shpnt,CURRENT_SC ->SCp.Status, -CURRENT_SC ->SCp.Message,DID_OK ); +done (shpnt,CURRENT_SC ->SCp.Status,DID_OK ); }else if (CURRENT_SC ->SCp.phase & aborted) { -done (shpnt,CURRENT_SC ->SCp.Status, -CURRENT_SC ->SCp.Message,DID_ABORT ); +done (shpnt,CURRENT_SC ->SCp.Status,DID_ABORT ); }else if (CURRENT_SC ->SCp.phase & resetted) { -done (shpnt,CURRENT_SC ->SCp.Status, -CURRENT_SC ->SCp.Message,DID_RESET ); +done (shpnt,CURRENT_SC ->SCp.Status,DID_RESET ); }else if (CURRENT_SC ->SCp.phase & disconnected) {/* target sent DISCONNECT */
@@ -1401,8 +1397,7 @@ static void busfree_run(struct Scsi_Host *shpnt)CURRENT_SC =NULL ; }else { -done (shpnt,SAM_STAT_GOOD , -COMMAND_COMPLETE ,DID_ERROR ); +done (shpnt,SAM_STAT_GOOD ,DID_ERROR ); }#if defined(AHA152X_STAT ) } else {
@@ -1523,8 +1518,7 @@ static void seldo_run(struct Scsi_Host *shpnt)if (TESTLO (SSTAT0 ,SELDO )) {scmd_printk (KERN_ERR ,CURRENT_SC ,"aha152x: passing bus free condition\n" ); -done (shpnt,SAM_STAT_GOOD , -COMMAND_COMPLETE ,DID_NO_CONNECT ); +done (shpnt,SAM_STAT_GOOD ,DID_NO_CONNECT );return ; }
@@ -1561,15 +1555,12 @@ static void selto_run(struct Scsi_Host *shpnt)CURRENT_SC ->SCp.phase &= ~selecting;if (CURRENT_SC ->SCp.phase & aborted) -done (shpnt,SAM_STAT_GOOD , -COMMAND_COMPLETE ,DID_ABORT ); +done (shpnt,SAM_STAT_GOOD ,DID_ABORT );else if (TESTLO (SSTAT0 ,SELINGO )) -done (shpnt,SAM_STAT_GOOD , -COMMAND_COMPLETE ,DID_BUS_BUSY ); +done (shpnt,SAM_STAT_GOOD ,DID_BUS_BUSY );else /* ARBITRATION won, but SELECTION failed */ -done (shpnt,SAM_STAT_GOOD , -COMMAND_COMPLETE ,DID_NO_CONNECT ); +done (shpnt,SAM_STAT_GOOD ,DID_NO_CONNECT ); }/*
@@ -1903,8 +1894,7 @@ static void cmd_init(struct Scsi_Host *shpnt)if (CURRENT_SC ->SCp.sent_command) {scmd_printk (KERN_ERR ,CURRENT_SC ,"command already sent\n" ); -done (shpnt,SAM_STAT_GOOD , -COMMAND_COMPLETE ,DID_ERROR ); +done (shpnt,SAM_STAT_GOOD ,DID_ERROR );return ; }
@@ -2244,8 +2234,7 @@ static int update_state(struct Scsi_Host *shpnt)static void parerr_run (struct Scsi_Host *shpnt) {scmd_printk (KERN_ERR ,CURRENT_SC ,"parity error\n" ); -done (shpnt,SAM_STAT_GOOD , -COMMAND_COMPLETE ,DID_PARITY ); +done (shpnt,SAM_STAT_GOOD ,DID_PARITY ); }/*
@@ -2268,7 +2257,7 @@ static void rsti_run(struct Scsi_Host *shpnt)kfree (ptr->host_scribble); ptr->host_scribble=NULL ; - ptr->result =DID_RESET <<16 ; +set_host_byte (ptr,DID_RESET ); ptr->scsi_done (ptr); }
@@ -2276,8 +2265,7 @@ static void rsti_run(struct Scsi_Host *shpnt) }if (CURRENT_SC && !CURRENT_SC ->device->soft_reset) -done (shpnt,SAM_STAT_GOOD , -COMMAND_COMPLETE ,DID_RESET ); +done (shpnt,SAM_STAT_GOOD ,DID_RESET ); }
Signature · 1 line
2.29.2
PATCH v3 32/40 fas216: translate message to host byte status
In reply to Hannes ReineckeInstead of setting the message byte translate it to the appropriate host byte. As error recovery would return DID_ERROR for any non-zero message byte the translation doesn't change the error handling.
--- drivers/scsi/arm/fas216.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/scsi/arm/fas216.c +5 -4
@@ -2042,8 +2042,10 @@ fas216_std_done(FAS216_Info *info, struct scsi_cmnd *SCpnt, unsigned int result) { info->stats.fins +=1 ; - SCpnt->result = result <<16 | info->scsi.SCp.Message <<8 | - info->scsi.SCp.Status; +set_host_byte (SCpnt, result); +if (result ==DID_OK ) +scsi_msg_to_host_byte (SCpnt, info->scsi.SCp.Message); +set_status_byte (SCpnt, info->scsi.SCp.Status);fas216_log_command (info,LOG_CONNECT , SCpnt,"command complete, result=0x%08x" , SCpnt->result);
@@ -2051,8 +2053,7 @@ fas216_std_done(FAS216_Info *info, struct scsi_cmnd *SCpnt, unsigned int result)/* * If the driver detected an error, we're all done. */ -if (host_byte (SCpnt->result) !=DID_OK || -msg_byte (SCpnt->result) !=COMMAND_COMPLETE ) +if (get_host_byte (SCpnt->result) !=DID_OK ) goto done;/*
Signature · 1 line
2.29.2
PATCH v3 35/40 fdomain: drop last argument to fdomain_finish_cmd()
In reply to Hannes ReineckeSet the SCSI host status before calling fdomein_finish_cmd(), and drop the last argument to that function.
--- drivers/scsi/fdomain.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-)
drivers/scsi/fdomain.c +12 -10
@@ -202,11 +202,10 @@ static int fdomain_select(struct Scsi_Host *sh, int target)return 1 ; } -static void fdomain_finish_cmd (struct fdomain *fd,int result) +static void fdomain_finish_cmd (struct fdomain *fd) {outb (0 , fd->base +REG_ICTL );fdomain_make_bus_idle (fd); - fd->cur_cmd->result = result; fd->cur_cmd->scsi_done (fd->cur_cmd); fd->cur_cmd =NULL ; }
@@ -273,7 +272,8 @@ static void fdomain_work(struct work_struct *work)if (cmd->SCp.phase & in_arbitration) { status =inb (fd->base +REG_ASTAT );if (!(status &ASTAT_ARB )) { -fdomain_finish_cmd (fd,DID_BUS_BUSY <<16 ); +set_host_byte (cmd,DID_BUS_BUSY ); +fdomain_finish_cmd (fd); goto out; } cmd->SCp.phase = in_selection;
@@ -290,7 +290,8 @@ static void fdomain_work(struct work_struct *work)if (!(status &BSTAT_BSY )) {/* Try again, for slow devices */ if (fdomain_select (cmd->device->host,scmd_id (cmd))) { -fdomain_finish_cmd (fd,DID_NO_CONNECT <<16 ); +set_host_byte (cmd,DID_NO_CONNECT ); +fdomain_finish_cmd (fd); goto out; }/* Stop arbitration and enable parity */
@@ -333,7 +334,7 @@ static void fdomain_work(struct work_struct *work)break ;case BSTAT_MSG |BSTAT_CMD |BSTAT_IO :/* MESSAGE IN */ cmd->SCp.Message =inb (fd->base +REG_SCSI_DATA ); -if (!cmd->SCp.Message) +if (cmd->SCp.Message ==COMMAND_COMPLETE ) ++done;break ; }
@@ -359,9 +360,10 @@ static void fdomain_work(struct work_struct *work)fdomain_read_data (cmd);if (done) { -fdomain_finish_cmd (fd, (cmd->SCp.Status &0xff ) | - ((cmd->SCp.Message &0xff ) <<8 ) | - (DID_OK <<16 )); +set_status_byte (cmd, cmd->SCp.Status); +set_msg_byte (cmd, cmd->SCp.Message); +set_host_byte (cmd,DID_OK ); +fdomain_finish_cmd (fd); }else {if (cmd->SCp.phase & disconnect) { outb(ICTL_FIFO | ICTL_SEL | ICTL_REQ | FIFO_COUNT,
@@ -439,10 +441,10 @@ static int fdomain_abort(struct scsi_cmnd *cmd)fdomain_make_bus_idle (fd); fd->cur_cmd->SCp.phase |= aborted; - fd->cur_cmd->result =DID_ABORT <<16 ;/* Aborts are not done well. . . */ -fdomain_finish_cmd (fd,DID_ABORT <<16 ); +set_host_byte (fd->cur_cmd,DID_ABORT ); +fdomain_finish_cmd (fd);spin_unlock_irqrestore (sh->host_lock, flags);return SUCCESS ; }
Signature · 1 line
2.29.2
PATCH v3 36/40 fdomain: translate message to host byte status
In reply to Hannes ReineckeInstead of setting the message byte translate it to the appropriate host byte. As error recovery would return DID_ERROR for any non-zero message byte the translation doesn't change the error handling.
--- drivers/scsi/fdomain.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/fdomain.c +1 -1
@@ -361,8 +361,8 @@ static void fdomain_work(struct work_struct *work)if (done) {set_status_byte (cmd, cmd->SCp.Status); -set_msg_byte (cmd, cmd->SCp.Message);set_host_byte (cmd,DID_OK ); +scsi_msg_to_host_byte (cmd, cmd->SCp.Message);fdomain_finish_cmd (fd); }else {if (cmd->SCp.phase & disconnect) {
Signature · 1 line
2.29.2
PATCH v3 34/40 FlashPoint: Use standard SCSI definitions
In reply to Hannes ReineckeNo point in having the driver providing its own definitions.
--- drivers/scsi/FlashPoint.c | 165 ++++++++++++++++---------------------- 1 file changed, 69 insertions(+), 96 deletions(-)
drivers/scsi/FlashPoint.c +69 -96
@@ -304,40 +304,12 @@ typedef struct SCCBscam_info { }SCCBSCAM_INFO ; -#define SCSI_REQUEST_SENSE 0x03 -#define SCSI_READ 0x08 -#define SCSI_WRITE 0x0A -#define SCSI_START_STOP_UNIT 0x1B -#define SCSI_READ_EXTENDED 0x28 -#define SCSI_WRITE_EXTENDED 0x2A -#define SCSI_WRITE_AND_VERIFY 0x2E - -#define SSGOOD 0x00 -#define SSCHECK 0x02 -#define SSQ_FULL 0x28 - -#define SMCMD_COMP 0x00 -#define SMEXT 0x01 -#define SMSAVE_DATA_PTR 0x02 -#define SMREST_DATA_PTR 0x03 -#define SMDISC 0x04 -#define SMABORT 0x06 -#define SMREJECT 0x07 -#define SMNO_OP 0x08 -#define SMPARITY 0x09 -#define SMDEV_RESET 0x0C -#define SMABORT_TAG 0x0D -#define SMINIT_RECOVERY 0x0F -#define SMREL_RECOVERY 0x10#define SMIDENT 0x80#define DISC_PRIV 0x40 -#define SMSYNC 0x01 -#define SMWDTR 0x03#define SM8BIT 0x00#define SM16BIT 0x01 -#define SMIGNORWR 0x23/* Ignore Wide Residue */ #define SIX_BYTE_CMD 0x06#define TWELVE_BYTE_CMD 0x0C
@@ -1660,7 +1632,7 @@ static int FlashPoint_AbortCCB(void *pCurrCard, struct sccb *p_Sccb) p_Sccb->Sccb_scsistat =ABORT_ST ; p_Sccb->Sccb_scsimsg = -SMABORT_TAG ; +ABORT_TASK ; if (((struct sccb_card *) pCurrCard)->currentSCCB ==
@@ -1812,7 +1784,7 @@ static int FlashPoint_HandleInterrupt(void *pcard)FPT_phaseChkFifo (ioport, thisCard);if (RD_HARPOON (ioport + hp_gp_reg_1) == -SMSAVE_DATA_PTR ) { +SAVE_POINTERS ) {WR_HARPOON (ioport + hp_gp_reg_1,0x00 ); currSCCB->Sccb_XferState |=F_NO_DATA_YET ;
@@ -1865,7 +1837,7 @@ static int FlashPoint_HandleInterrupt(void *pcard)FPT_phaseChkFifo (ioport, thisCard);if (RD_HARPOON (ioport + hp_gp_reg_1) == -SMSAVE_DATA_PTR ) { +SAVE_POINTERS ) {WR_HARPOON (ioport + hp_gp_reg_1,0x00 ); currSCCB->Sccb_XferState |=F_NO_DATA_YET ;
@@ -2258,7 +2230,7 @@ static unsigned char FPT_sfm(u32 port, struct sccb *pCurrSCCB)WR_HARPOON (port + hp_fiforead,0 );WR_HARPOON (port + hp_fifowrite,0 );if (pCurrSCCB !=NULL ) { - pCurrSCCB->Sccb_scsimsg =SMPARITY ; + pCurrSCCB->Sccb_scsimsg =MSG_PARITY_ERROR ; } message =0x00 ; do {
@@ -2411,7 +2383,7 @@ static void FPT_ssel(u32 port, unsigned char p_card)WRW_HARPOON ((port +ID_MSG_STRT +2 ),BRH_OP +ALWAYS +NP ); - currSCCB->Sccb_scsimsg =SMDEV_RESET ; + currSCCB->Sccb_scsimsg =TARGET_RESET ;WR_HARPOON (port + hp_autostart_3, (SELECT +SELCHK_STRT )); auto_loaded =1 ;
@@ -2758,9 +2730,9 @@ static void FPT_sres(u32 port, unsigned char p_card,if (message ==0 ) { msgRetryCount++;if (msgRetryCount ==1 ) { -FPT_SendMsg (port,SMPARITY ); +FPT_SendMsg (port,MSG_PARITY_ERROR ); }else { -FPT_SendMsg (port,SMDEV_RESET ); +FPT_SendMsg (port,TARGET_RESET );FPT_sssyncv (port, our_target,NARROW_SCSI , currTar_Info);
@@ -2860,8 +2832,8 @@ static void FPT_SendMsg(u32 port, unsigned char message)WR_HARPOON (port + hp_portctrl_0,0x00 ); -if ((message ==SMABORT ) || (message ==SMDEV_RESET ) || - (message ==SMABORT_TAG )) { +if ((message ==ABORT_TASK_SET ) || (message ==TARGET_RESET ) || + (message ==ABORT_TASK )) {while (! (RDW_HARPOON ((port + hp_intstat)) & (BUS_FREE |PHASE ))) {
@@ -2893,7 +2865,7 @@ static void FPT_sdecm(unsigned char message, u32 port, unsigned char p_card) currTar_Info = &FPT_sccbMgrTbl[p_card][currSCCB->TargID]; -if (message ==SMREST_DATA_PTR ) { +if (message ==RESTORE_POINTERS ) {if (!(currSCCB->Sccb_XferState &F_NO_DATA_YET )) { currSCCB->Sccb_ATC = currSCCB->Sccb_savedATC;
@@ -2905,7 +2877,7 @@ static void FPT_sdecm(unsigned char message, u32 port, unsigned char p_card) (AUTO_IMMED + DISCONNECT_START)); } -else if (message ==SMCMD_COMP ) { +else if (message ==COMMAND_COMPLETE ) {if (currSCCB->Sccb_scsistat ==SELECT_Q_ST ) { currTar_Info->TarStatus &=
@@ -2917,15 +2889,16 @@ static void FPT_sdecm(unsigned char message, u32 port, unsigned char p_card) } -else if ((message ==SMNO_OP ) || (message >=SMIDENT ) - || (message ==SMINIT_RECOVERY ) || (message ==SMREL_RECOVERY )) { +else if ((message ==NOP ) || (message >=IDENTIFY_BASE ) || + (message ==INITIATE_RECOVERY ) || + (message ==RELEASE_RECOVERY )) {ACCEPT_MSG (port);WR_HARPOON (port + hp_autostart_1, (AUTO_IMMED +DISCONNECT_START )); } -else if (message ==SMREJECT ) { +else if (message ==MESSAGE_REJECT ) { if ((currSCCB->Sccb_scsistat == SELECT_SN_ST) || (currSCCB->Sccb_scsistat == SELECT_WN_ST) ||
@@ -3026,19 +2999,19 @@ static void FPT_sdecm(unsigned char message, u32 port, unsigned char p_card) } } -else if (message ==SMEXT ) { +else if (message ==EXTENDED_MESSAGE ) {ACCEPT_MSG (port);FPT_shandem (port, p_card, currSCCB); } -else if (message ==SMIGNORWR ) { +else if (message ==IGNORE_WIDE_RESIDUE ) {ACCEPT_MSG (port);/* ACK the RESIDUE MSG */ message =FPT_sfm (port, currSCCB); -if (currSCCB->Sccb_scsimsg !=SMPARITY ) +if (currSCCB->Sccb_scsimsg !=MSG_PARITY_ERROR )ACCEPT_MSG (port);WR_HARPOON (port + hp_autostart_1, (AUTO_IMMED +DISCONNECT_START ));
@@ -3047,7 +3020,7 @@ static void FPT_sdecm(unsigned char message, u32 port, unsigned char p_card)else { currSCCB->HostStatus =SCCB_PHASE_SEQUENCE_FAIL ; - currSCCB->Sccb_scsimsg =SMREJECT ; + currSCCB->Sccb_scsimsg =MESSAGE_REJECT ;ACCEPT_MSG_ATN (port); WR_HARPOON(port + hp_autostart_1,
@@ -3073,7 +3046,7 @@ static void FPT_shandem(u32 port, unsigned char p_card, struct sccb *pCurrSCCB) message =FPT_sfm (port, pCurrSCCB);if (message) { -if (message ==SMSYNC ) { +if (message ==EXTENDED_SDTR ) {if (length ==0x03 ) {
@@ -3081,10 +3054,10 @@ static void FPT_shandem(u32 port, unsigned char p_card, struct sccb *pCurrSCCB)FPT_stsyncn (port, p_card); }else { - pCurrSCCB->Sccb_scsimsg =SMREJECT ; + pCurrSCCB->Sccb_scsimsg =MESSAGE_REJECT ;ACCEPT_MSG_ATN (port); } - }else if (message ==SMWDTR ) { + }else if (message ==EXTENDED_WDTR ) {if (length ==0x02 ) {
@@ -3092,7 +3065,7 @@ static void FPT_shandem(u32 port, unsigned char p_card, struct sccb *pCurrSCCB)FPT_stwidn (port, p_card); }else { - pCurrSCCB->Sccb_scsimsg =SMREJECT ; + pCurrSCCB->Sccb_scsimsg =MESSAGE_REJECT ;ACCEPT_MSG_ATN (port); WR_HARPOON(port + hp_autostart_1,
@@ -3101,20 +3074,20 @@ static void FPT_shandem(u32 port, unsigned char p_card, struct sccb *pCurrSCCB) } }else { - pCurrSCCB->Sccb_scsimsg =SMREJECT ; + pCurrSCCB->Sccb_scsimsg =MESSAGE_REJECT ;ACCEPT_MSG_ATN (port);WR_HARPOON (port + hp_autostart_1, (AUTO_IMMED +DISCONNECT_START )); } }else { -if (pCurrSCCB->Sccb_scsimsg !=SMPARITY ) +if (pCurrSCCB->Sccb_scsimsg !=MSG_PARITY_ERROR )ACCEPT_MSG (port);WR_HARPOON (port + hp_autostart_1, (AUTO_IMMED +DISCONNECT_START )); } }else { -if (pCurrSCCB->Sccb_scsimsg ==SMPARITY ) +if (pCurrSCCB->Sccb_scsimsg ==MSG_PARITY_ERROR )WR_HARPOON (port + hp_autostart_1, (AUTO_IMMED +DISCONNECT_START )); }
@@ -3148,10 +3121,10 @@ static unsigned char FPT_sisyncn(u32 port, unsigned char p_card,WRW_HARPOON ((port +ID_MSG_STRT +2 ),BRH_OP +ALWAYS +CMDPZ );WRW_HARPOON ((port +SYNC_MSGS +0 ), - (MPM_OP +AMSG_OUT +SMEXT )); + (MPM_OP +AMSG_OUT +EXTENDED_MESSAGE ));WRW_HARPOON ((port +SYNC_MSGS +2 ), (MPM_OP +AMSG_OUT +0x03 ));WRW_HARPOON ((port +SYNC_MSGS +4 ), - (MPM_OP +AMSG_OUT +SMSYNC )); + (MPM_OP +AMSG_OUT +EXTENDED_SDTR ));if ((currTar_Info->TarEEValue &EE_SYNC_MASK ) ==EE_SYNC_20MB )
@@ -3221,7 +3194,7 @@ static void FPT_stsyncn(u32 port, unsigned char p_card) sync_msg =FPT_sfm (port, currSCCB); -if ((sync_msg ==0x00 ) && (currSCCB->Sccb_scsimsg ==SMPARITY )) { +if ((sync_msg ==0x00 ) && (currSCCB->Sccb_scsimsg ==MSG_PARITY_ERROR )) {WR_HARPOON (port + hp_autostart_1, (AUTO_IMMED +DISCONNECT_START ));return ;
@@ -3231,7 +3204,7 @@ static void FPT_stsyncn(u32 port, unsigned char p_card) offset =FPT_sfm (port, currSCCB); -if ((offset ==0x00 ) && (currSCCB->Sccb_scsimsg ==SMPARITY )) { +if ((offset ==0x00 ) && (currSCCB->Sccb_scsimsg ==MSG_PARITY_ERROR )) {WR_HARPOON (port + hp_autostart_1, (AUTO_IMMED +DISCONNECT_START ));return ;
@@ -3343,9 +3316,11 @@ static void FPT_sisyncr(u32 port, unsigned char sync_pulse, unsigned char offset) {ARAM_ACCESS (port); -WRW_HARPOON ((port +SYNC_MSGS +0 ), (MPM_OP +AMSG_OUT +SMEXT )); +WRW_HARPOON ((port +SYNC_MSGS +0 ), + (MPM_OP +AMSG_OUT +EXTENDED_MESSAGE ));WRW_HARPOON ((port +SYNC_MSGS +2 ), (MPM_OP +AMSG_OUT +0x03 )); -WRW_HARPOON ((port +SYNC_MSGS +4 ), (MPM_OP +AMSG_OUT +SMSYNC )); +WRW_HARPOON ((port +SYNC_MSGS +4 ), + (MPM_OP +AMSG_OUT +EXTENDED_SDTR ));WRW_HARPOON ((port +SYNC_MSGS +6 ), (MPM_OP +AMSG_OUT + sync_pulse));WRW_HARPOON ((port +SYNC_MSGS +8 ), (RAT_OP ));WRW_HARPOON ((port +SYNC_MSGS +10 ), (MPM_OP +AMSG_OUT + offset));
@@ -3388,10 +3363,10 @@ static unsigned char FPT_siwidn(u32 port, unsigned char p_card)WRW_HARPOON ((port +ID_MSG_STRT +2 ),BRH_OP +ALWAYS +CMDPZ );WRW_HARPOON ((port +SYNC_MSGS +0 ), - (MPM_OP +AMSG_OUT +SMEXT )); + (MPM_OP +AMSG_OUT +EXTENDED_MESSAGE ));WRW_HARPOON ((port +SYNC_MSGS +2 ), (MPM_OP +AMSG_OUT +0x02 ));WRW_HARPOON ((port +SYNC_MSGS +4 ), - (MPM_OP +AMSG_OUT +SMWDTR )); + (MPM_OP +AMSG_OUT +EXTENDED_WDTR ));WRW_HARPOON ((port +SYNC_MSGS +6 ), (RAT_OP ));WRW_HARPOON ((port +SYNC_MSGS +8 ), (MPM_OP +AMSG_OUT +SM16BIT ));
@@ -3436,7 +3411,7 @@ static void FPT_stwidn(u32 port, unsigned char p_card) width =FPT_sfm (port, currSCCB); -if ((width ==0x00 ) && (currSCCB->Sccb_scsimsg ==SMPARITY )) { +if ((width ==0x00 ) && (currSCCB->Sccb_scsimsg ==MSG_PARITY_ERROR )) {WR_HARPOON (port + hp_autostart_1, (AUTO_IMMED +DISCONNECT_START ));return ;
@@ -3499,9 +3474,11 @@ static void FPT_stwidn(u32 port, unsigned char p_card)static void FPT_siwidr (u32 port,unsigned char width) {ARAM_ACCESS (port); -WRW_HARPOON ((port +SYNC_MSGS +0 ), (MPM_OP +AMSG_OUT +SMEXT )); +WRW_HARPOON ((port +SYNC_MSGS +0 ), + (MPM_OP +AMSG_OUT +EXTENDED_MESSAGE ));WRW_HARPOON ((port +SYNC_MSGS +2 ), (MPM_OP +AMSG_OUT +0x02 )); -WRW_HARPOON ((port +SYNC_MSGS +4 ), (MPM_OP +AMSG_OUT +SMWDTR )); +WRW_HARPOON ((port +SYNC_MSGS +4 ), + (MPM_OP +AMSG_OUT +EXTENDED_WDTR ));WRW_HARPOON ((port +SYNC_MSGS +6 ), (RAT_OP ));WRW_HARPOON ((port +SYNC_MSGS +8 ), (MPM_OP +AMSG_OUT + width));WRW_HARPOON ((port +SYNC_MSGS +10 ), (BRH_OP +ALWAYS +NP ));
@@ -3682,7 +3659,7 @@ static void FPT_ssenss(struct sccb_card *pCurrCard) } currSCCB->CdbLength =SIX_BYTE_CMD ; - currSCCB->Cdb[0 ] =SCSI_REQUEST_SENSE ; + currSCCB->Cdb[0 ] =REQUEST_SENSE ; currSCCB->Cdb[1 ] = currSCCB->Cdb[1 ] & (unsigned char )0xE0 ;/*Keep LUN. */ currSCCB->Cdb[2 ] =0x00 ; currSCCB->Cdb[3 ] =0x00 ;
@@ -3939,13 +3916,9 @@ static void FPT_sinits(struct sccb *p_sccb, unsigned char p_card)*/ if ((currTar_Info->TarStatus &TAR_ALLOW_DISC ) || (currTar_Info->TarStatus &TAG_Q_TRYING )) { - p_sccb->Sccb_idmsg = - (unsigned char )(SMIDENT |DISC_PRIV ) | p_sccb->Lun; - } - -else { - - p_sccb->Sccb_idmsg = (unsigned char )SMIDENT | p_sccb->Lun; + p_sccb->Sccb_idmsg =IDENTIFY (true, p_sccb->Lun); + }else { + p_sccb->Sccb_idmsg =IDENTIFY (false, p_sccb->Lun); } p_sccb->HostStatus =0x00 ;
@@ -3962,7 +3935,7 @@ static void FPT_sinits(struct sccb *p_sccb, unsigned char p_card)*/ p_sccb->Sccb_scsistat =BUS_FREE_ST ; p_sccb->SccbStatus =SCCB_IN_PROCESS ; - p_sccb->Sccb_scsimsg =SMNO_OP ; + p_sccb->Sccb_scsimsg =NOP ; }
@@ -4167,7 +4140,7 @@ static void FPT_phaseMsgOut(u32 port, unsigned char p_card) message = currSCCB->Sccb_scsimsg; scsiID = currSCCB->TargID; -if (message ==SMDEV_RESET ) { +if (message ==TARGET_RESET ) { currTar_Info = &FPT_sccbMgrTbl[p_card][scsiID]; currTar_Info->TarSyncCtrl =0 ;
@@ -4203,7 +4176,7 @@ static void FPT_phaseMsgOut(u32 port, unsigned char p_card)else if (currSCCB->Sccb_scsistat <COMMAND_ST ) { -if (message ==SMNO_OP ) { +if (message ==NOP ) { currSCCB->Sccb_MGRFlags |=F_DEV_SELECTED ;FPT_ssel (port, p_card);
@@ -4211,13 +4184,13 @@ static void FPT_phaseMsgOut(u32 port, unsigned char p_card) } }else { -if (message ==SMABORT ) +if (message ==ABORT_TASK_SET )FPT_queueFlushSccb (p_card,SCCB_COMPLETE ); } }else { - message =SMABORT ; + message =ABORT_TASK_SET ; }WRW_HARPOON ((port + hp_intstat), (BUS_FREE |PHASE |XFER_CNT_0 ));
@@ -4232,8 +4205,8 @@ static void FPT_phaseMsgOut(u32 port, unsigned char p_card)WR_HARPOON (port + hp_portctrl_0,0x00 ); -if ((message ==SMABORT ) || (message ==SMDEV_RESET ) || - (message ==SMABORT_TAG )) { +if ((message ==ABORT_TASK_SET ) || (message ==TARGET_RESET ) || + (message ==ABORT_TASK )) {while (!(RDW_HARPOON ((port + hp_intstat)) & (BUS_FREE |PHASE ))) { }
@@ -4275,8 +4248,8 @@ static void FPT_phaseMsgOut(u32 port, unsigned char p_card)else { -if (message ==SMPARITY ) { - currSCCB->Sccb_scsimsg =SMNO_OP ; +if (message ==MSG_PARITY_ERROR ) { + currSCCB->Sccb_scsimsg =NOP ;WR_HARPOON (port + hp_autostart_1, (AUTO_IMMED +DISCONNECT_START )); }else {
@@ -4306,7 +4279,7 @@ static void FPT_phaseMsgIn(u32 port, unsigned char p_card) } message =RD_HARPOON (port + hp_scsidata_0); -if ((message ==SMDISC ) || (message ==SMSAVE_DATA_PTR )) { +if ((message ==DISCONNECT ) || (message ==SAVE_POINTERS )) {WR_HARPOON (port + hp_autostart_1, (AUTO_IMMED +END_DATA_START ));
@@ -4321,7 +4294,7 @@ static void FPT_phaseMsgIn(u32 port, unsigned char p_card)FPT_sdecm (message, port, p_card); }else { -if (currSCCB->Sccb_scsimsg !=SMPARITY ) +if (currSCCB->Sccb_scsimsg !=MSG_PARITY_ERROR )ACCEPT_MSG (port);WR_HARPOON (port + hp_autostart_1, (AUTO_IMMED +DISCONNECT_START ));
@@ -4351,7 +4324,7 @@ static void FPT_phaseIllegal(u32 port, unsigned char p_card) currSCCB->HostStatus =SCCB_PHASE_SEQUENCE_FAIL ; currSCCB->Sccb_scsistat =ABORT_ST ; - currSCCB->Sccb_scsimsg =SMABORT ; + currSCCB->Sccb_scsimsg =ABORT_TASK_SET ; }ACCEPT_MSG_ATN (port);
@@ -4650,9 +4623,9 @@ static void FPT_autoCmdCmplt(u32 p_port, unsigned char p_card) FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUN_CA =0 ; -if (status_byte !=SSGOOD ) { +if (status_byte !=SAM_STAT_GOOD ) { -if (status_byte ==SSQ_FULL ) { +if (status_byte ==SAM_STAT_TASK_SET_FULL ) { if (((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) && ((FPT_sccbMgrTbl[p_card][currSCCB->TargID].
@@ -4784,7 +4757,7 @@ static void FPT_autoCmdCmplt(u32 p_port, unsigned char p_card) } -if (status_byte ==SSCHECK ) { +if (status_byte ==SAM_STAT_CHECK_CONDITION ) {if (FPT_BL_Card[p_card].globalFlags &F_DO_RENEGO ) {if (FPT_sccbMgrTbl[p_card][currSCCB->TargID]. TarEEValue &EE_SYNC_MASK ) {
@@ -4806,7 +4779,7 @@ static void FPT_autoCmdCmplt(u32 p_port, unsigned char p_card) currSCCB->SccbStatus =SCCB_ERROR ; currSCCB->TargetStatus = status_byte; -if (status_byte ==SSCHECK ) { +if (status_byte ==SAM_STAT_CHECK_CONDITION ) { FPT_sccbMgrTbl[p_card][currSCCB->TargID]. TarLUN_CA =1 ;
@@ -6868,14 +6841,14 @@ static void FPT_queueCmdComplete(struct sccb_card *pCurrCard,if ((p_sccb-> ControlByte & (SCCB_DATA_XFER_OUT |SCCB_DATA_XFER_IN )) && (p_sccb->HostStatus ==SCCB_COMPLETE ) - && (p_sccb->TargetStatus !=SSCHECK )) - -if ((SCSIcmd ==SCSI_READ ) || - (SCSIcmd ==SCSI_WRITE ) || - (SCSIcmd ==SCSI_READ_EXTENDED ) || - (SCSIcmd ==SCSI_WRITE_EXTENDED ) || - (SCSIcmd ==SCSI_WRITE_AND_VERIFY ) || - (SCSIcmd ==SCSI_START_STOP_UNIT ) || + && (p_sccb->TargetStatus !=SAM_STAT_CHECK_CONDITION )) + +if ((SCSIcmd ==READ_6 ) || + (SCSIcmd ==WRITE_6 ) || + (SCSIcmd ==READ_10 ) || + (SCSIcmd ==WRITE_10 ) || + (SCSIcmd ==WRITE_VERIFY ) || + (SCSIcmd ==START_STOP ) || (pCurrCard->globalFlags &F_NO_FILTER ) ) p_sccb->HostStatus =SCCB_DATA_UNDER_RUN ;
Signature · 1 line
2.29.2
PATCH v3 37/40 scsi: drop message byte helper
In reply to Hannes ReineckeThe message byte is now unused, so we can drop the helper to set the message byte and the check for message bytes during error recovery.
--- block/scsi_ioctl.c | 2 +- drivers/scsi/scsi_error.c | 18 ++---------------- drivers/scsi/sg.c | 2 +- drivers/xen/xen-scsiback.c | 2 +- include/scsi/scsi.h | 3 +-- include/scsi/scsi_cmnd.h | 5 ----- 6 files changed, 6 insertions(+), 26 deletions(-)
block/scsi_ioctl.c +1 -1
@@ -254,7 +254,7 @@ static int blk_complete_sghdr_rq(struct request *rq, struct sg_io_hdr *hdr,*/ hdr->status = req->result &0xff ; hdr->masked_status =status_byte (req->result); - hdr->msg_status =msg_byte (req->result); + hdr->msg_status =COMMAND_COMPLETE ; hdr->host_status =host_byte (req->result); hdr->driver_status =0 ;if (scsi_status_is_check_condition (hdr->status))
drivers/scsi/scsi_error.c +2 -16
@@ -741,12 +741,6 @@ static enum scsi_disposition scsi_eh_completed_normally(struct scsi_cmnd *scmd)if (host_byte (scmd->result) !=DID_OK )return FAILED ; -/* -* next, check the message byte. -*/ -if (msg_byte (scmd->result) !=COMMAND_COMPLETE ) -return FAILED ; -/* * now, check the status byte to see if this indicates * anything special.
@@ -1766,8 +1760,7 @@ int scsi_noretry_cmd(struct scsi_cmnd *scmd)case DID_PARITY :return (scmd->request->cmd_flags &REQ_FAILFAST_DEV );case DID_ERROR : -if (msg_byte (scmd->result) ==COMMAND_COMPLETE && -status_byte (scmd->result) ==RESERVATION_CONFLICT ) +if (status_byte (scmd->result) ==RESERVATION_CONFLICT )return 0 ; fallthrough;case DID_SOFT_ERROR :
@@ -1883,8 +1876,7 @@ enum scsi_disposition scsi_decide_disposition(struct scsi_cmnd *scmd)*/ return SUCCESS ;case DID_ERROR : -if (msg_byte (scmd->result) ==COMMAND_COMPLETE && -status_byte (scmd->result) ==RESERVATION_CONFLICT ) +if (status_byte (scmd->result) ==RESERVATION_CONFLICT )/* * execute reservation conflict processing code * lower down
@@ -1912,12 +1904,6 @@ enum scsi_disposition scsi_decide_disposition(struct scsi_cmnd *scmd)return FAILED ; } -/* -* next, check the message byte. -*/ -if (msg_byte (scmd->result) !=COMMAND_COMPLETE ) -return FAILED ; -/* * check the status byte to see if this indicates anything special. */
drivers/scsi/sg.c +1 -1
@@ -1376,7 +1376,7 @@ sg_rq_end_io(struct request *rq, blk_status_t status) srp->header.status =0xff & result; srp->header.masked_status =status_byte (result); - srp->header.msg_status =msg_byte (result); + srp->header.msg_status =COMMAND_COMPLETE ; srp->header.host_status =host_byte (result); srp->header.driver_status =driver_byte (result); if ((sdp->sgdebug > 0) &&
drivers/xen/xen-scsiback.c +1 -1
@@ -224,7 +224,7 @@ static void scsiback_print_status(char *sense_buffer, int errors,pr_err ("[%s:%d] cmnd[0]=%02x -> st=%02x msg=%02x host=%02x\n" , tpg->tport->tport_name, pending_req->v2p->lun, - pending_req->cmnd[0 ],status_byte (errors),msg_byte (errors), + pending_req->cmnd[0 ],status_byte (errors),COMMAND_COMPLETE ,host_byte (errors)); }
include/scsi/scsi.h +1 -2
@@ -210,11 +210,10 @@ enum scsi_disposition {* These are set by: * * status byte = set from target device -* msg_byte = return status from host adapter itself. +* msg_byte (unused) * host_byte = set by low-level driver to indicate status. */ #define status_byte (result) (((result) >> 1) & 0x7f) -#define msg_byte (result) (((result) >> 8) & 0xff)#define host_byte (result) (((result) >> 16) & 0xff)#define sense_class (sense) (((sense) >> 4) & 0x7)
include/scsi/scsi_cmnd.h +0 -5
@@ -321,11 +321,6 @@ static inline u8 get_status_byte(struct scsi_cmnd *cmd)return cmd->result &0xff ; } -static inline void set_msg_byte (struct scsi_cmnd *cmd,char status) -{ - cmd->result = (cmd->result &0xffff00ff ) | (status <<8 ); -} -static inline void set_host_byte (struct scsi_cmnd *cmd,char status) { cmd->result = (cmd->result &0xff00ffff ) | (status <<16 );
Signature · 1 line
2.29.2
PATCH v3 39/40 target: use standard SAM status types
In reply to Hannes Reinecketarget_complete_cmd() and friends requires a SAM status type, so passing GOOD here is actually wrong.
--- drivers/target/target_core_alua.c | 6 +++--- drivers/target/target_core_iblock.c | 2 +- drivers/target/target_core_pr.c | 8 ++++---- drivers/target/target_core_pscsi.c | 2 +- drivers/target/target_core_sbc.c | 10 +++++----- drivers/target/target_core_spc.c | 14 +++++++------- drivers/target/target_core_xcopy.c | 2 +- 7 files changed, 22 insertions(+), 22 deletions(-)
drivers/target/target_core_alua.c +3 -3
@@ -123,7 +123,7 @@ target_emulate_report_referrals(struct se_cmd *cmd)transport_kunmap_data_sg (cmd); -target_complete_cmd (cmd,GOOD ); +target_complete_cmd (cmd,SAM_STAT_GOOD );return 0 ; }
@@ -255,7 +255,7 @@ target_emulate_report_target_port_groups(struct se_cmd *cmd) }transport_kunmap_data_sg (cmd); -target_complete_cmd_with_length (cmd,GOOD , rd_len +4 ); +target_complete_cmd_with_length (cmd,SAM_STAT_GOOD , rd_len +4 );return 0 ; }
@@ -424,7 +424,7 @@ target_emulate_set_target_port_groups(struct se_cmd *cmd) out:transport_kunmap_data_sg (cmd);if (!rc) -target_complete_cmd (cmd,GOOD ); +target_complete_cmd (cmd,SAM_STAT_GOOD );return rc; }
drivers/target/target_core_iblock.c +1 -1
@@ -474,7 +474,7 @@ iblock_execute_zero_out(struct block_device *bdev, struct se_cmd *cmd)if (ret)return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE ; -target_complete_cmd (cmd,GOOD ); +target_complete_cmd (cmd,SAM_STAT_GOOD );return 0 ; }
drivers/target/target_core_pr.c +4 -4
@@ -234,7 +234,7 @@ target_scsi2_reservation_release(struct se_cmd *cmd) out_unlock:spin_unlock (&dev->dev_reservation_lock); out: -target_complete_cmd (cmd,GOOD ); +target_complete_cmd (cmd,SAM_STAT_GOOD );return 0 ; }
@@ -297,7 +297,7 @@ target_scsi2_reservation_reserve(struct se_cmd *cmd)spin_unlock (&dev->dev_reservation_lock); out:if (!ret) -target_complete_cmd (cmd,GOOD ); +target_complete_cmd (cmd,SAM_STAT_GOOD );return ret; }
@@ -3676,7 +3676,7 @@ target_scsi3_emulate_pr_out(struct se_cmd *cmd) }if (!ret) -target_complete_cmd (cmd,GOOD ); +target_complete_cmd (cmd,SAM_STAT_GOOD );return ret; }
@@ -4073,7 +4073,7 @@ target_scsi3_emulate_pr_in(struct se_cmd *cmd) }if (!ret) -target_complete_cmd (cmd,GOOD ); +target_complete_cmd (cmd,SAM_STAT_GOOD );return ret; }
drivers/target/target_core_pscsi.c +1 -1
@@ -1044,7 +1044,7 @@ static void pscsi_req_done(struct request *req, blk_status_t status)struct se_cmd *cmd = req->end_io_data;struct pscsi_plugin_task *pt = cmd->priv;int result =scsi_req (req)->result; -u8 scsi_status =status_byte (result) <<1 ; +u8 scsi_status = result &0xff ;if (scsi_status !=SAM_STAT_GOOD ) { pr_debug("PSCSI Status Byte exception at cmd: %p CDB:"
drivers/target/target_core_sbc.c +5 -5
@@ -67,7 +67,7 @@ sbc_emulate_readcapacity(struct se_cmd *cmd)transport_kunmap_data_sg (cmd); } -target_complete_cmd_with_length (cmd,GOOD ,8 ); +target_complete_cmd_with_length (cmd,SAM_STAT_GOOD ,8 );return 0 ; }
@@ -130,7 +130,7 @@ sbc_emulate_readcapacity_16(struct se_cmd *cmd)transport_kunmap_data_sg (cmd); } -target_complete_cmd_with_length (cmd,GOOD ,32 ); +target_complete_cmd_with_length (cmd,SAM_STAT_GOOD ,32 );return 0 ; }
@@ -202,14 +202,14 @@ sbc_execute_write_same_unmap(struct se_cmd *cmd)return ret; } -target_complete_cmd (cmd,GOOD ); +target_complete_cmd (cmd,SAM_STAT_GOOD );return 0 ; }static sense_reason_t sbc_emulate_noop (struct se_cmd *cmd) { -target_complete_cmd (cmd,GOOD ); +target_complete_cmd (cmd,SAM_STAT_GOOD );return 0 ; }
@@ -1245,7 +1245,7 @@ sbc_execute_unmap(struct se_cmd *cmd) err:transport_kunmap_data_sg (cmd);if (!ret) -target_complete_cmd (cmd,GOOD ); +target_complete_cmd (cmd,SAM_STAT_GOOD );return ret; }
drivers/target/target_core_spc.c +7 -7
@@ -750,7 +750,7 @@ spc_emulate_inquiry(struct se_cmd *cmd)kfree (buf);if (!ret) -target_complete_cmd_with_length (cmd,GOOD , len); +target_complete_cmd_with_length (cmd,SAM_STAT_GOOD , len);return ret; }
@@ -1104,7 +1104,7 @@ static sense_reason_t spc_emulate_modesense(struct se_cmd *cmd)transport_kunmap_data_sg (cmd); } -target_complete_cmd_with_length (cmd,GOOD , length); +target_complete_cmd_with_length (cmd,SAM_STAT_GOOD , length);return 0 ; }
@@ -1122,7 +1122,7 @@ static sense_reason_t spc_emulate_modeselect(struct se_cmd *cmd)int i;if (!cmd->data_length) { -target_complete_cmd (cmd,GOOD ); +target_complete_cmd (cmd,SAM_STAT_GOOD );return 0 ; }
@@ -1165,7 +1165,7 @@ static sense_reason_t spc_emulate_modeselect(struct se_cmd *cmd)transport_kunmap_data_sg (cmd);if (!ret) -target_complete_cmd (cmd,GOOD ); +target_complete_cmd (cmd,SAM_STAT_GOOD );return ret; }
@@ -1198,7 +1198,7 @@ static sense_reason_t spc_emulate_request_sense(struct se_cmd *cmd)memcpy (rbuf, buf,min_t (u32,sizeof (buf), cmd->data_length));transport_kunmap_data_sg (cmd); -target_complete_cmd (cmd,GOOD ); +target_complete_cmd (cmd,SAM_STAT_GOOD );return 0 ; }
@@ -1265,7 +1265,7 @@ sense_reason_t spc_emulate_report_luns(struct se_cmd *cmd)transport_kunmap_data_sg (cmd); } -target_complete_cmd_with_length (cmd,GOOD ,8 + lun_count *8 ); +target_complete_cmd_with_length (cmd,SAM_STAT_GOOD ,8 + lun_count *8 );return 0 ; }EXPORT_SYMBOL (spc_emulate_report_luns);
@@ -1273,7 +1273,7 @@ EXPORT_SYMBOL(spc_emulate_report_luns);static sense_reason_t spc_emulate_testunitready (struct se_cmd *cmd) { -target_complete_cmd (cmd,GOOD ); +target_complete_cmd (cmd,SAM_STAT_GOOD );return 0 ; }
drivers/target/target_core_xcopy.c +1 -1
@@ -1011,7 +1011,7 @@ static sense_reason_t target_rcr_operating_parameters(struct se_cmd *se_cmd)put_unaligned_be32 (42 , &p[0 ]);transport_kunmap_data_sg (se_cmd); -target_complete_cmd (se_cmd,GOOD ); +target_complete_cmd (se_cmd,SAM_STAT_GOOD );return TCM_NO_SENSE ; }
Signature · 1 line
2.29.2
PATCH v3 38/40 scsi: kill message byte
In reply to Hannes ReineckeRemove last vestiges of SCSI status message bytes.
--- Documentation/scsi/scsi_mid_low_api.rst | 6 ++--- drivers/scsi/scsi_lib.c | 5 +--- include/trace/events/scsi.h | 33 +------------------------ 3 files changed, 5 insertions(+), 39 deletions(-)
Documentation/scsi/scsi_mid_low_api.rst +3 -3
@@ -1176,9 +1176,9 @@ Members of interest: of 0 implies a successfully completed command (and all data (if any) has been transferred to or from the SCSI target device). 'result' is a 32 bit unsigned integer that - can be viewed as 4 related bytes. The SCSI status value is - in the LSB. See include/scsi/scsi.h status_byte(), - msg_byte() and host_byte() macros and related constants. + can be viewed as 2 related bytes. The SCSI status value is + in the LSB. See include/scsi/scsi.h status_byte() and + host_byte() macros and related constants. sense_buffer - an array (maximum size: SCSI_SENSE_BUFFERSIZE bytes) that should be written when the SCSI status (LSB of 'result')
drivers/scsi/scsi_lib.c +1 -4
@@ -625,10 +625,7 @@ static blk_status_t scsi_result_to_blk_status(struct scsi_cmnd *cmd, int result) {switch (host_byte (result)) {case DID_OK : -/* -* Also check the other bytes than the status byte in result -*/ -if (scsi_status_is_good (result) && (result & ~0xff ) ==0 ) +if (scsi_status_is_good (result))return BLK_STS_OK ;return BLK_STS_IOERR ;case DID_TRANSPORT_FAILFAST :
include/trace/events/scsi.h +1 -32
@@ -124,37 +124,6 @@ scsi_hostbyte_name(DID_TRANSPORT_DISRUPTED), \ scsi_hostbyte_name(DID_TRANSPORT_FAILFAST)) -#define scsi_msgbyte_name (result) { result, #result } -#define show_msgbyte_name (val) \ - __print_symbolic(val, \ - scsi_msgbyte_name(COMMAND_COMPLETE), \ - scsi_msgbyte_name(EXTENDED_MESSAGE), \ - scsi_msgbyte_name(SAVE_POINTERS), \ - scsi_msgbyte_name(RESTORE_POINTERS), \ - scsi_msgbyte_name(DISCONNECT), \ - scsi_msgbyte_name(INITIATOR_ERROR), \ - scsi_msgbyte_name(ABORT_TASK_SET), \ - scsi_msgbyte_name(MESSAGE_REJECT), \ - scsi_msgbyte_name(NOP), \ - scsi_msgbyte_name(MSG_PARITY_ERROR), \ - scsi_msgbyte_name(LINKED_CMD_COMPLETE), \ - scsi_msgbyte_name(LINKED_FLG_CMD_COMPLETE), \ - scsi_msgbyte_name(TARGET_RESET), \ - scsi_msgbyte_name(ABORT_TASK), \ - scsi_msgbyte_name(CLEAR_TASK_SET), \ - scsi_msgbyte_name(INITIATE_RECOVERY), \ - scsi_msgbyte_name(RELEASE_RECOVERY), \ - scsi_msgbyte_name(CLEAR_ACA), \ - scsi_msgbyte_name(LOGICAL_UNIT_RESET), \ - scsi_msgbyte_name(SIMPLE_QUEUE_TAG), \ - scsi_msgbyte_name(HEAD_OF_QUEUE_TAG), \ - scsi_msgbyte_name(ORDERED_QUEUE_TAG), \ - scsi_msgbyte_name(IGNORE_WIDE_RESIDUE), \ - scsi_msgbyte_name(ACA), \ - scsi_msgbyte_name(QAS_REQUEST), \ - scsi_msgbyte_name(BUS_DEVICE_RESET), \ - scsi_msgbyte_name(ABORT)) -#define scsi_statusbyte_name (result) { result, #result }#define show_statusbyte_name (val) \ __print_symbolic(val, \
@@ -316,7 +285,7 @@ DECLARE_EVENT_CLASS(scsi_cmd_done_timeout_template,__print_hex (__get_dynamic_array (cmnd), __entry->cmd_len),"DRIVER_OK" ,show_hostbyte_name (((__entry->result) >>16 ) &0xff ), -show_msgbyte_name (((__entry->result) >>8 ) &0xff ), +"COMMAND_COMPLETE" , show_statusbyte_name(__entry->result & 0xff)) );
Signature · 1 line
2.29.2
PATCH v3 40/40 scsi: drop obsolete linux-specific SCSI status codes
In reply to Hannes ReineckeOriginally the SCSI subsystem has been using 'special' SCSI status codes, which were the SAM-specified ones but shifted by 1. As most drivers have now been modified to use the SAM-specified ones having two nearly identical sets of definitions only causes confusion for no good reason.
And the linux-specifed SCSI status codes are marked obsolete since several years now.
So drop them and use the SAM-specified status codes throughout.
--- drivers/ata/libata-scsi.c | 2 +- drivers/infiniband/ulp/srp/ib_srp.c | 2 +- drivers/scsi/3w-9xxx.c | 2 +- drivers/scsi/3w-xxxx.c | 4 +-- drivers/scsi/53c700.c | 6 ++-- drivers/scsi/NCR5380.c | 2 +- drivers/scsi/arcmsr/arcmsr_hba.c | 4 +-- drivers/scsi/esas2r/esas2r_main.c | 2 +- drivers/scsi/megaraid.c | 4 +-- drivers/scsi/megaraid/megaraid_mbox.c | 4 +-- drivers/scsi/scsi_error.c | 48 +++++++++++++-------------- drivers/scsi/scsi_lib.c | 2 +- drivers/scsi/sr.c | 2 +- drivers/scsi/sr_ioctl.c | 2 +- drivers/xen/xen-scsiback.c | 2 +- include/scsi/scsi.h | 1 - include/scsi/scsi_proto.h | 22 +----------- include/scsi/sg.h | 20 +++++++++++ 18 files changed, 65 insertions(+), 66 deletions(-)
drivers/ata/libata-scsi.c +1 -1
@@ -642,7 +642,7 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev,if (cmd->request->rq_flags &RQF_QUIET ) qc->flags |=ATA_QCFLAG_QUIET ; }else { - cmd->result = (DID_OK <<16 ) | (QUEUE_FULL <<1 ); + cmd->result = (DID_OK <<16 ) |SAM_STAT_TASK_SET_FULL ; cmd->scsi_done (cmd); }
drivers/infiniband/ulp/srp/ib_srp.c +1 -1
@@ -2232,7 +2232,7 @@ static int srp_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scmnd)* to reduce queue depth temporarily. */ scmnd->result = len == -ENOMEM ? -DID_OK <<16 |QUEUE_FULL <<1 :DID_ERROR <<16 ; +DID_OK <<16 |SAM_STAT_TASK_SET_FULL :DID_ERROR <<16 ; goto err_iu; }
drivers/scsi/3w-9xxx.c +1 -1
@@ -1342,7 +1342,7 @@ static irqreturn_t twa_interrupt(int irq, void *dev_instance)/* If error, command failed */ if (error ==1 ) {/* Ask for a host reset */ - cmd->result = (DID_OK <<16 ) | (CHECK_CONDITION <<1 ); + cmd->result = (DID_OK <<16 ) |SAM_STAT_CHECK_CONDITION ; }/* Report residual bytes for single sgl */
drivers/scsi/3w-xxxx.c +2 -2
@@ -429,7 +429,7 @@ static int tw_decode_sense(TW_Device_Extension *tw_dev, int request_id, int fill/* Additional sense code qualifier */ tw_dev->srb[request_id]->sense_buffer[13 ] = tw_sense_table[i][3 ]; - tw_dev->srb[request_id]->result = (DID_OK <<16 ) | (CHECK_CONDITION <<1 ); + tw_dev->srb[request_id]->result = (DID_OK <<16 ) |SAM_STAT_CHECK_CONDITION ;return TW_ISR_DONT_RESULT ;/* Special case for isr to not over-write result */ } }
@@ -2159,7 +2159,7 @@ static irqreturn_t tw_interrupt(int irq, void *dev_instance)/* If error, command failed */ if (error ==1 ) {/* Ask for a host reset */ - tw_dev->srb[request_id]->result = (DID_OK <<16 ) | (CHECK_CONDITION <<1 ); + tw_dev->srb[request_id]->result = (DID_OK <<16 ) |SAM_STAT_CHECK_CONDITION ; }/* Now complete the io */
drivers/scsi/53c700.c +3 -3
@@ -979,10 +979,10 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp,if (NCR_700_get_tag_neg_state (SCp->device) ==NCR_700_DURING_TAG_NEGOTIATION )NCR_700_set_tag_neg_state (SCp->device,NCR_700_FINISHED_TAG_NEGOTIATION ); - +/* check for contingent allegiance conditions */ -if (hostdata->status[0 ] >>1 ==CHECK_CONDITION || - hostdata->status[0 ] >>1 ==COMMAND_TERMINATED ) { +if (hostdata->status[0 ] ==SAM_STAT_CHECK_CONDITION || + hostdata->status[0 ] ==SAM_STAT_COMMAND_TERMINATED ) {struct NCR_700_command_slot *slot = (struct NCR_700_command_slot *)SCp->host_scribble;if (slot->flags ==NCR_700_FLAG_AUTOSENSE ) {
drivers/scsi/NCR5380.c +1 -1
@@ -538,7 +538,7 @@ static void complete_cmd(struct Scsi_Host *instance,if (hostdata->sensing == cmd) {/* Autosense processing ends here */ -if (status_byte (cmd->result) !=GOOD ) { +if (get_status_byte (cmd) !=SAM_STAT_GOOD ) {scsi_eh_restore_cmnd (cmd, &hostdata->ses); }else {scsi_eh_restore_cmnd (cmd, &hostdata->ses);
drivers/scsi/arcmsr/arcmsr_hba.c +2 -2
@@ -1326,7 +1326,7 @@ static void arcmsr_report_sense_info(struct CommandControlBlock *ccb)struct scsi_cmnd *pcmd = ccb->pcmd;struct SENSE_DATA *sensebuffer = (struct SENSE_DATA *)pcmd->sense_buffer; - pcmd->result = (DID_OK <<16 ) | (CHECK_CONDITION <<1 ); + pcmd->result = (DID_OK <<16 ) |SAM_STAT_CHECK_CONDITION ;if (sensebuffer) {int sense_data_length =sizeof (struct SENSE_DATA ) <SCSI_SENSE_BUFFERSIZE
@@ -3242,7 +3242,7 @@ static int arcmsr_queue_command_lck(struct scsi_cmnd *cmd,if (!ccb)return SCSI_MLQUEUE_HOST_BUSY ;if (arcmsr_build_ccb ( acb, ccb, cmd ) ==FAILED ) { - cmd->result = (DID_ERROR <<16 ) | (RESERVATION_CONFLICT <<1 ); + cmd->result = (DID_ERROR <<16 ) |SAM_STAT_RESERVATION_CONFLICT ; cmd->scsi_done (cmd);return 0 ; }
drivers/scsi/esas2r/esas2r_main.c +1 -1
@@ -1525,7 +1525,7 @@ void esas2r_complete_request_cb(struct esas2r_adapter *a, rq->cmd->result = ((esas2r_req_status_to_error (rq->req_stat) <<16 ) - | (rq->func_rsp.scsi_rsp.scsi_stat &STATUS_MASK )); + | rq->func_rsp.scsi_rsp.scsi_stat);if (rq->req_stat ==RS_UNDERRUN ) scsi_set_resid(rq->cmd,
drivers/scsi/megaraid.c +2 -2
@@ -1611,7 +1611,7 @@ mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)*/ if ( cmd->cmnd[0 ] ==TEST_UNIT_READY ) { cmd->result |= (DID_ERROR <<16 ) | - (RESERVATION_CONFLICT <<1 ); +SAM_STAT_RESERVATION_CONFLICT ; }else /*
@@ -1623,7 +1623,7 @@ mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status) cmd->cmnd[0] == RELEASE) ) { cmd->result |= (DID_ERROR << 16) | - (RESERVATION_CONFLICT << 1); + SAM_STAT_RESERVATION_CONFLICT; } else#endif
drivers/scsi/megaraid/megaraid_mbox.c +2 -2
@@ -2327,7 +2327,7 @@ megaraid_mbox_dpc(unsigned long devp)*/ if (scp->cmnd[0 ] ==TEST_UNIT_READY ) { scp->result =DID_ERROR <<16 | -RESERVATION_CONFLICT <<1 ; +SAM_STAT_RESERVATION_CONFLICT ; }else /*
@@ -2338,7 +2338,7 @@ megaraid_mbox_dpc(unsigned long devp) scp->cmnd[0] == RELEASE)) { scp->result = DID_ERROR << 16 | - RESERVATION_CONFLICT << 1; + SAM_STAT_RESERVATION_CONFLICT; } else { scp->result =DID_BAD_TARGET <<16 | status;
drivers/scsi/scsi_error.c +24 -24
117 lines not on this page · raw message
drivers/scsi/scsi_lib.c +1 -1
@@ -907,7 +907,7 @@ static int scsi_io_completion_nz_result(struct scsi_cmnd *cmd, int result,* if it can't fit). Treat SAM_STAT_CONDITION_MET and the related * intermediate statuses (both obsolete in SAM-4) as good. */ -if (status_byte (result) &&scsi_status_is_good (result)) { +if ((result &0xff ) &&scsi_status_is_good (result)) { result =0 ; *blk_statp =BLK_STS_OK ; }
drivers/scsi/sr.c +1 -1
@@ -338,7 +338,7 @@ static int sr_done(struct scsi_cmnd *SCpnt)* care is taken to avoid unnecessary additional work such as * memcpy's that could be avoided. */ -if (status_byte (result) ==SAM_STAT_CHECK_CONDITION && +if (scsi_status_is_check_condition (result) && (SCpnt->sense_buffer[0 ] &0x7f ) ==0x70 ) {/* Sense current */ switch (SCpnt->sense_buffer[2 ]) {case MEDIUM_ERROR :
drivers/scsi/sr_ioctl.c +1 -1
@@ -209,7 +209,7 @@ int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc) err = result; goto out; } -if (status_byte (result) ==SAM_STAT_CHECK_CONDITION ) { +if (scsi_status_is_check_condition (result)) {switch (sshdr->sense_key) {case UNIT_ATTENTION : SDev->changed =1 ;
drivers/xen/xen-scsiback.c +1 -1
@@ -224,7 +224,7 @@ static void scsiback_print_status(char *sense_buffer, int errors,pr_err ("[%s:%d] cmnd[0]=%02x -> st=%02x msg=%02x host=%02x\n" , tpg->tport->tport_name, pending_req->v2p->lun, - pending_req->cmnd[0 ],status_byte (errors),COMMAND_COMPLETE , + pending_req->cmnd[0 ], errors &0xff ,COMMAND_COMPLETE ,host_byte (errors)); }
include/scsi/scsi.h +0 -1
@@ -213,7 +213,6 @@ enum scsi_disposition {* msg_byte (unused) * host_byte = set by low-level driver to indicate status. */ -#define status_byte (result) (((result) >> 1) & 0x7f)#define host_byte (result) (((result) >> 16) & 0xff)#define sense_class (sense) (((sense) >> 4) & 0x7)
include/scsi/scsi_proto.h +1 -21
@@ -202,27 +202,7 @@ struct scsi_varlen_cdb_hdr {#define SAM_STAT_ACA_ACTIVE 0x30#define SAM_STAT_TASK_ABORTED 0x40 -/* -* Status codes. These are deprecated as they are shifted 1 bit right -* from those found in the SCSI standards. This causes confusion for -* applications that are ported to several OSes. Prefer SAM Status codes -* above. -*/ - -#define GOOD 0x00 -#define CHECK_CONDITION 0x01 -#define CONDITION_GOOD 0x02 -#define BUSY 0x04 -#define INTERMEDIATE_GOOD 0x08 -#define INTERMEDIATE_C_GOOD 0x0a -#define RESERVATION_CONFLICT 0x0c -#define COMMAND_TERMINATED 0x11 -#define QUEUE_FULL 0x14 -#define ACA_ACTIVE 0x18 -#define TASK_ABORTED 0x20 - -#define STATUS_MASK 0xfe - +#define STATUS_MASK 0xfe/* * SENSE KEYS */
include/scsi/sg.h +20 -0
@@ -145,6 +145,26 @@ struct compat_sg_io_hdr {/* Obsolete driver_byte() declaration */ #define driver_byte (result) (((result) >> 24) & 0xff) +/* +* Original linux SCSI Status codes. They are shifted 1 bit right +* from those found in the SCSI standards. +*/ + +#define GOOD 0x00 +#define CHECK_CONDITION 0x01 +#define CONDITION_GOOD 0x02 +#define BUSY 0x04 +#define INTERMEDIATE_GOOD 0x08 +#define INTERMEDIATE_C_GOOD 0x0a +#define RESERVATION_CONFLICT 0x0c +#define COMMAND_TERMINATED 0x11 +#define QUEUE_FULL 0x14 +#define ACA_ACTIVE 0x18 +#define TASK_ABORTED 0x20 + +/* Obsolete status_byte() declaration */ +#define status_byte (result) (((result) >> 1) & 0x7f) + typedef struct sg_scsi_id { /* used by SG_GET_SCSI_ID ioctl() */ int host_no; /* as in "scsi<n>" where 'n' is one of 0, 1, 2 etc */ int channel;
Signature · 1 line
2.29.2
Re: [PATCH 01/40] st: return error code in st_scsi_execute()
In reply to Hannes ReineckeQuoted 11 lines · Hannes Reinecke
The callers to
st_scsi_executealready check for negative return values, so we can drop the use ofDRIVER_ERRORand return the actual error code.Signed-off-by Hannes Reinecke <[email protected]>Reviewed-by Bart Van Assche <[email protected]>Reviewed-by Christoph Hellwig <[email protected]>
Re: [PATCH 40/40] scsi: drop obsolete linux-specific SCSI status codes
In reply to Hannes ReineckeQuoted 6 lines · Hannes Reinecke
include/scsi/sg.h +6
-0+/* +* Original linux SCSI Status codes. They are shifted 1 bit right +* from those found in the SCSI standards. +*/ + +#define GOOD 0x00
include/scsi/sg.h struct compat_sg_io_hdr { · line 163
Quoted 10 lines
include/scsi/sg.h +10
-0+#define CHECK_CONDITION 0x01 +#define CONDITION_GOOD 0x02 +#define BUSY 0x04 +#define INTERMEDIATE_GOOD 0x08 +#define INTERMEDIATE_C_GOOD 0x0a +#define RESERVATION_CONFLICT 0x0c +#define COMMAND_TERMINATED 0x11 +#define QUEUE_FULL 0x14 +#define ACA_ACTIVE 0x18 +#define TASK_ABORTED 0x20
I don't think there is any need to keep defining them, is there?
Re: [PATCH 40/40] scsi: drop obsolete linux-specific SCSI status codes
Quoted 11 lines · Christoph Hellwig
Quoted 10 lines · Hannes Reinecke
include/scsi/sg.h +10
-0+/* +* Original linux SCSI Status codes. They are shifted 1 bit right +* from those found in the SCSI standards. +*/ + +#define GOOD 0x00 +#define CHECK_CONDITION 0x01 +#define CONDITION_GOOD 0x02 +#define BUSY 0x04 +#define INTERMEDIATE_GOOD 0x08
Quoted 9 lines
include/scsi/sg.h struct compat_sg_io_hdr { · line 163
Quoted 6 lines
include/scsi/sg.h +6
-0+#define INTERMEDIATE_C_GOOD 0x0a +#define RESERVATION_CONFLICT 0x0c +#define COMMAND_TERMINATED 0x11 +#define QUEUE_FULL 0x14 +#define ACA_ACTIVE 0x18 +#define TASK_ABORTED 0x20I don't think there is any need to keep defining them, is there?
Probably not. I'll drop them for the next round.
Cheers,
Hannes
Signature · 4 lines
Dr. Hannes Reinecke Kernel Storage Architect [email protected] +49 911 74053 688 SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, 90409 Nürnberg HRB 36809 (AG Nürnberg), GF: Felix Imendörffer
Re: [PATCH 40/40] scsi: drop obsolete linux-specific SCSI status codes
In reply to Christoph HellwigQuoted 11 lines · Christoph Hellwig
Quoted 10 lines · Hannes Reinecke
include/scsi/sg.h +10
-0+/* +* Original linux SCSI Status codes. They are shifted 1 bit right +* from those found in the SCSI standards. +*/ + +#define GOOD 0x00 +#define CHECK_CONDITION 0x01 +#define CONDITION_GOOD 0x02 +#define BUSY 0x04 +#define INTERMEDIATE_GOOD 0x08
Quoted 8 lines
include/scsi/sg.h struct compat_sg_io_hdr { · line 163
Quoted 6 lines
include/scsi/sg.h +6
-0+#define INTERMEDIATE_C_GOOD 0x0a +#define RESERVATION_CONFLICT 0x0c +#define COMMAND_TERMINATED 0x11 +#define QUEUE_FULL 0x14 +#define ACA_ACTIVE 0x18 +#define TASK_ABORTED 0x20I don't think there is any need to keep defining them, is there?
If you don't mind breaking existing, user space facing APIs, then yes, they can be dropped ...
Banishing them to the sg header is correct IMO. Which is exactly what this patch does.
One thought, they could be wrapped with:
#ifndef __KERNEL__
...
#endif
and repeated in a new header: scsi/sg_priv.h
Then the sg driver and any other files that need those old defines could include sg_priv.h . The result would be parts of the kernel not being polluted with commonly use names like GOOD and BUSY.
Anyway: