Skip to contentSkip to conversation

i2c: qcom-cci: add sm8250 compatible

PATCH In review Jonathan Marek 5 participants 5 messages May 13, 2021 – Jun 20, 2021

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 i2c: qcom-cci: add sm8250 compatible

SM8250 CCI is the same as SDM845, add an equivalent compatible for SM8250.

---
 Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt | 5 +++--
 drivers/i2c/busses/i2c-qcom-cci.c                      | 1 +
 2 files changed, 4 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt +3 -2
index c6668b7c66e6..7b9fc0c22eaf 100644
@@ -9,6 +9,7 @@ PROPERTIES:
 		"qcom,msm8916-cci"
 		"qcom,msm8996-cci"
 		"qcom,sdm845-cci"
+		"qcom,sm8250-cci"
 
 - reg
 	Usage: required
@@ -41,8 +42,8 @@ PROPERTIES:
 
 SUBNODES:
 
-The CCI provides I2C masters for one (msm8916) or two i2c busses (msm8996 and
-sdm845), described as subdevices named "i2c-bus@0" and "i2c-bus@1".
+The CCI provides I2C masters for one (msm8916) or two i2c busses (msm8996,
+sdm845 and sm8250), described as subdevices named "i2c-bus@0" and "i2c-bus@1".
 
 PROPERTIES:
 
drivers/i2c/busses/i2c-qcom-cci.c +1 -0
index c63d5545fc2a..c1de8eb66169 100644
@@ -769,6 +769,7 @@ static const struct of_device_id cci_dt_match[] = {
 	{ .compatible = "qcom,msm8916-cci", .data = &cci_v1_data},
 	{ .compatible = "qcom,msm8996-cci", .data = &cci_v2_data},
 	{ .compatible = "qcom,sdm845-cci", .data = &cci_v2_data},
+	{ .compatible = "qcom,sm8250-cci", .data = &cci_v2_data},
 	{}
 };
 MODULE_DEVICE_TABLE(of, cci_dt_match);
Signature · 1 line
2.26.1