Skip to contentSkip to conversation

add support for zstd

PATCH In review [email protected] 4 participants 4 messages Jun 1, 2021 – Jun 7, 2021

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 add support for zstd

Date: Tue, 1 Jun 2021 15:43:00 +0800
Subject: [PATCH] add support for zstd

Add support for zstd

---
 Makefile       |  5 +++++
 diskdump_mod.h |  1 +
 makedumpfile.c | 36 ++++++++++++++++++++++++++++++------
 makedumpfile.h |  1 +
 4 files changed, 37 insertions(+), 6 deletions(-)
Makefile +5 -0
index 5d61a69..725c186 100644
@@ -68,6 +68,11 @@ endif
 CFLAGS += -DUSESNAPPY
 endif
 
+ifeq ($(USEZSTD), on)
+LIBS := -lzstd $(LIBS)
+CFLAGS += -DUSEZSTD
+endif
+
 LIBS := $(LIBS) -lpthread
 
 try-run = $(shell set -e;      \
diskdump_mod.h +1 -0
index 3733953..ffd9ab2 100644
@@ -98,6 +98,7 @@ struct kdump_sub_header {
 #define DUMP_DH_COMPRESSED_INCOMPLETE  0x8
                    /* indicate an incomplete dumpfile */
 #define DUMP_DH_EXCLUDED_VMEMMAP 0x10  /* unused vmemmap pages are excluded */
+#define DUMP_DH_COMPRESSED_ZSTD 0x20
 
 /* descriptor of each page for vmcore */
 typedef struct page_desc {
makedumpfile.c +30 -6
index 894c88e..3b588c3 100644
@@ -26,6 +26,9 @@
 #include <limits.h>
 #include <assert.h>
 #include <zlib.h>
+#ifdef USEZSTD
+#include <zstd.h>
+#endif
 
 struct symbol_table    symbol_table;
 struct size_table  size_table;
@@ -296,10 +299,10 @@ is_cache_page(unsigned long flags)
 static inline unsigned long
 calculate_len_buf_out(long page_size)
 {
-   unsigned long len_buf_out_zlib, len_buf_out_lzo, len_buf_out_snappy;
+   unsigned long len_buf_out_zlib, len_buf_out_lzo, len_buf_out_snappy, len_buf_out_zstd;
    unsigned long len_buf_out;
 
-   len_buf_out_zlib = len_buf_out_lzo = len_buf_out_snappy = 0;
+   len_buf_out_zlib = len_buf_out_lzo = len_buf_out_snappy = len_buf_out_zstd = 0;
 
 #ifdef USELZO
    len_buf_out_lzo = page_size + page_size / 16 + 64 + 3;
@@ -309,11 +312,14 @@ calculate_len_buf_out(long page_size)
    len_buf_out_snappy = snappy_max_compressed_length(page_size);
 #endif
 
+#ifdef USEZSTD
+   len_buf_out_zstd = ZSTD_compressBound(page_size);
+#endif
+
    len_buf_out_zlib = compressBound(page_size);
 
-   len_buf_out = MAX(len_buf_out_zlib,
-             MAX(len_buf_out_lzo,
-                 len_buf_out_snappy));
+   len_buf_out = MAX(MAX(len_buf_out_zlib,len_buf_out_zstd),
+           MAX(len_buf_out_lzo,len_buf_out_snappy));
 
    return len_buf_out;
 }
@@ -7235,6 +7241,10 @@ write_kdump_header(void)
 
    if (info->flag_compress & DUMP_DH_COMPRESSED_ZLIB)
        dh->status |= DUMP_DH_COMPRESSED_ZLIB;
+#ifdef USEZSTD
+   else if (info->flag_compress & DUMP_DH_COMPRESSED_ZSTD)
+       dh->status |= DUMP_DH_COMPRESSED_ZSTD;
+#endif
 #ifdef USELZO
    else if (info->flag_compress & DUMP_DH_COMPRESSED_LZO)
        dh->status |= DUMP_DH_COMPRESSED_LZO;
@@ -8589,6 +8599,17 @@ write_kdump_pages_cyclic(struct cache_data *cd_header, struct cache_data *cd_pag
            && (size_out < info->page_size)) {
            pd.flags = DUMP_DH_COMPRESSED_ZLIB;
            pd.size  = size_out;
+#ifdef USEZSTD
+       } else if ((info->flag_compress & DUMP_DH_COMPRESSED_ZSTD)
+               && (size_out = len_buf_out)
+               && (len_buf_out = ZSTD_compress((void *)buf_out,
+                       size_out, (const void *)buf, info->page_size, 1))
+               && (len_buf_out < info->page_size)
+             ) {
+           CHECK_ZSTD(len_buf_out);
+           pd.flags = DUMP_DH_COMPRESSED_ZSTD;
+           pd.size  = len_buf_out;
+#endif
 #ifdef USELZO
        } else if (info->flag_lzo_support
               && (info->flag_compress & DUMP_DH_COMPRESSED_LZO)
@@ -11605,7 +11626,7 @@ main(int argc, char *argv[])
 
    info->block_order = DEFAULT_ORDER;
    message_level = DEFAULT_MSG_LEVEL;
-   while ((opt = getopt_long(argc, argv, "b:cDd:eEFfg:hi:lpRvXx:", longopts,
+   while ((opt = getopt_long(argc, argv, "b:cDd:eEFfg:hi:lpRvXx:z", longopts,
        NULL)) != -1) {
        switch (opt) {
        case OPT_BLOCK_ORDER:
@@ -11617,6 +11638,9 @@ main(int argc, char *argv[])
        case OPT_COMPRESS_ZLIB:
            info->flag_compress = DUMP_DH_COMPRESSED_ZLIB;
            break;
+       case OPT_COMPRESS_ZSTD:
+           info->flag_compress = DUMP_DH_COMPRESSED_ZSTD;
+           break;
        case OPT_DEBUG:
            flag_debug = TRUE;
            break;
makedumpfile.h +1 -0
index 79046f2..3fb1b57 100644
@@ -2463,6 +2463,7 @@ struct elf_prstatus {
 #define OPT_VERSION             'v'
 #define OPT_EXCLUDE_XEN_DOM     'X'
 #define OPT_VMLINUX             'x'
+#define OPT_COMPRESS_ZSTD       'z'
 #define OPT_START               256
 #define OPT_SPLIT               OPT_START+0
 #define OPT_REASSEMBLE          OPT_START+1
Signature · 1 line
1.8.3.1

_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec

#1 lore raw

-----Original Message-----

Quoted 4 lines

Date: Tue, 1 Jun 2021 15:43:00 +0800
Subject: [PATCH] add support for zstd

Add support for zstd

Thanks for the patch, but we've worked on the zstd support based on these test patches:
https://github.com/k-hagio/makedumpfile/commit/f6eaf2424f41d8e9af40f7ce67e0f52b387311af
https://github.com/k-hagio/crash/commit/5c55c380120d7b7d450e07c4605aaf330f6219dc

I would like to proceed with those, please wait for a while.

Coiby, do you have any patch you can share and how is the state? IIRC, your draft patches supported also decompression etc.

Thanks,
Kazu

Quoted 143 lines
---
 Makefile       |  5 +++++
 diskdump_mod.h |  1 +
 makedumpfile.c | 36 ++++++++++++++++++++++++++++++------
 makedumpfile.h |  1 +
 4 files changed, 37 insertions(+), 6 deletions(-)
Makefile +5 -0
index 5d61a69..725c186 100644
@@ -68,6 +68,11 @@ endif
 CFLAGS += -DUSESNAPPY
 endif
 
+ifeq ($(USEZSTD), on)
+LIBS := -lzstd $(LIBS)
+CFLAGS += -DUSEZSTD
+endif
+
 LIBS := $(LIBS) -lpthread
 
 try-run = $(shell set -e;      \
diskdump_mod.h +1 -0
index 3733953..ffd9ab2 100644
@@ -98,6 +98,7 @@ struct kdump_sub_header {
 #define DUMP_DH_COMPRESSED_INCOMPLETE  0x8
                    /* indicate an incomplete dumpfile */
 #define DUMP_DH_EXCLUDED_VMEMMAP 0x10  /* unused vmemmap pages are excluded */
+#define DUMP_DH_COMPRESSED_ZSTD 0x20
 
 /* descriptor of each page for vmcore */
 typedef struct page_desc {
makedumpfile.c +30 -6
index 894c88e..3b588c3 100644
@@ -26,6 +26,9 @@
 #include <limits.h>
 #include <assert.h>
 #include <zlib.h>
+#ifdef USEZSTD
+#include <zstd.h>
+#endif
 
 struct symbol_table    symbol_table;
 struct size_table  size_table;
@@ -296,10 +299,10 @@ is_cache_page(unsigned long flags)
 static inline unsigned long
 calculate_len_buf_out(long page_size)
 {
-   unsigned long len_buf_out_zlib, len_buf_out_lzo, len_buf_out_snappy;
+   unsigned long len_buf_out_zlib, len_buf_out_lzo, len_buf_out_snappy, len_buf_out_zstd;
    unsigned long len_buf_out;
 
-   len_buf_out_zlib = len_buf_out_lzo = len_buf_out_snappy = 0;
+   len_buf_out_zlib = len_buf_out_lzo = len_buf_out_snappy = len_buf_out_zstd = 0;
 
 #ifdef USELZO
    len_buf_out_lzo = page_size + page_size / 16 + 64 + 3;
@@ -309,11 +312,14 @@ calculate_len_buf_out(long page_size)
    len_buf_out_snappy = snappy_max_compressed_length(page_size);
 #endif
 
+#ifdef USEZSTD
+   len_buf_out_zstd = ZSTD_compressBound(page_size);
+#endif
+
    len_buf_out_zlib = compressBound(page_size);
 
-   len_buf_out = MAX(len_buf_out_zlib,
-             MAX(len_buf_out_lzo,
-                 len_buf_out_snappy));
+   len_buf_out = MAX(MAX(len_buf_out_zlib,len_buf_out_zstd),
+           MAX(len_buf_out_lzo,len_buf_out_snappy));
 
    return len_buf_out;
 }
@@ -7235,6 +7241,10 @@ write_kdump_header(void)
 
    if (info->flag_compress & DUMP_DH_COMPRESSED_ZLIB)
        dh->status |= DUMP_DH_COMPRESSED_ZLIB;
+#ifdef USEZSTD
+   else if (info->flag_compress & DUMP_DH_COMPRESSED_ZSTD)
+       dh->status |= DUMP_DH_COMPRESSED_ZSTD;
+#endif
 #ifdef USELZO
    else if (info->flag_compress & DUMP_DH_COMPRESSED_LZO)
        dh->status |= DUMP_DH_COMPRESSED_LZO;
@@ -8589,6 +8599,17 @@ write_kdump_pages_cyclic(struct cache_data *cd_header, struct cache_data *cd_pag
            && (size_out < info->page_size)) {
            pd.flags = DUMP_DH_COMPRESSED_ZLIB;
            pd.size  = size_out;
+#ifdef USEZSTD
+       } else if ((info->flag_compress & DUMP_DH_COMPRESSED_ZSTD)
+               && (size_out = len_buf_out)
+               && (len_buf_out = ZSTD_compress((void *)buf_out,
+                       size_out, (const void *)buf, info->page_size, 1))
+               && (len_buf_out < info->page_size)
+             ) {
+           CHECK_ZSTD(len_buf_out);
+           pd.flags = DUMP_DH_COMPRESSED_ZSTD;
+           pd.size  = len_buf_out;
+#endif
 #ifdef USELZO
        } else if (info->flag_lzo_support
               && (info->flag_compress & DUMP_DH_COMPRESSED_LZO)
@@ -11605,7 +11626,7 @@ main(int argc, char *argv[])
 
    info->block_order = DEFAULT_ORDER;
    message_level = DEFAULT_MSG_LEVEL;
-   while ((opt = getopt_long(argc, argv, "b:cDd:eEFfg:hi:lpRvXx:", longopts,
+   while ((opt = getopt_long(argc, argv, "b:cDd:eEFfg:hi:lpRvXx:z", longopts,
        NULL)) != -1) {
        switch (opt) {
        case OPT_BLOCK_ORDER:
@@ -11617,6 +11638,9 @@ main(int argc, char *argv[])
        case OPT_COMPRESS_ZLIB:
            info->flag_compress = DUMP_DH_COMPRESSED_ZLIB;
            break;
+       case OPT_COMPRESS_ZSTD:
+           info->flag_compress = DUMP_DH_COMPRESSED_ZSTD;
+           break;
        case OPT_DEBUG:
            flag_debug = TRUE;
            break;
makedumpfile.h +1 -1
index 79046f2..3fb1b57 100644
@@ -2463,6 +2463,7 @@ struct elf_prstatus {
 #define OPT_VERSION             'v'
 #define OPT_EXCLUDE_XEN_DOM     'X'
 #define OPT_VMLINUX             'x'
+#define OPT_COMPRESS_ZSTD       'z'
 #define OPT_START               256
 #define OPT_SPLIT               OPT_START+0
 #define OPT_REASSEMBLE          OPT_START+1
--
Quoted 1 line

1.8.3.1

_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec

#3 lore raw
In reply to [email protected]

Add Coiby and Kairui since they also did some experiments on this.

Quoted 148 lines · On Sun, 6 Jun 2021 at 15:07, <[email protected]> wrote:

Date: Tue, 1 Jun 2021 15:43:00 +0800
Subject: [PATCH] add support for zstd

Add support for zstd

---
 Makefile       |  5 +++++
 diskdump_mod.h |  1 +
 makedumpfile.c | 36 ++++++++++++++++++++++++++++++------
 makedumpfile.h |  1 +
 4 files changed, 37 insertions(+), 6 deletions(-)
Makefile +5 -0
index 5d61a69..725c186 100644
@@ -68,6 +68,11 @@ endif
 CFLAGS += -DUSESNAPPY
 endif
 
+ifeq ($(USEZSTD), on)
+LIBS := -lzstd $(LIBS)
+CFLAGS += -DUSEZSTD
+endif
+
 LIBS := $(LIBS) -lpthread
 
 try-run = $(shell set -e;      \
diskdump_mod.h +1 -0
index 3733953..ffd9ab2 100644
@@ -98,6 +98,7 @@ struct kdump_sub_header {
 #define DUMP_DH_COMPRESSED_INCOMPLETE  0x8
                    /* indicate an incomplete dumpfile */
 #define DUMP_DH_EXCLUDED_VMEMMAP 0x10  /* unused vmemmap pages are excluded */
+#define DUMP_DH_COMPRESSED_ZSTD 0x20
 
 /* descriptor of each page for vmcore */
 typedef struct page_desc {
makedumpfile.c +30 -6
index 894c88e..3b588c3 100644
@@ -26,6 +26,9 @@
 #include <limits.h>
 #include <assert.h>
 #include <zlib.h>
+#ifdef USEZSTD
+#include <zstd.h>
+#endif
 
 struct symbol_table    symbol_table;
 struct size_table  size_table;
@@ -296,10 +299,10 @@ is_cache_page(unsigned long flags)
 static inline unsigned long
 calculate_len_buf_out(long page_size)
 {
-   unsigned long len_buf_out_zlib, len_buf_out_lzo, len_buf_out_snappy;
+   unsigned long len_buf_out_zlib, len_buf_out_lzo, len_buf_out_snappy, len_buf_out_zstd;
    unsigned long len_buf_out;
 
-   len_buf_out_zlib = len_buf_out_lzo = len_buf_out_snappy = 0;
+   len_buf_out_zlib = len_buf_out_lzo = len_buf_out_snappy = len_buf_out_zstd = 0;
 
 #ifdef USELZO
    len_buf_out_lzo = page_size + page_size / 16 + 64 + 3;
@@ -309,11 +312,14 @@ calculate_len_buf_out(long page_size)
    len_buf_out_snappy = snappy_max_compressed_length(page_size);
 #endif
 
+#ifdef USEZSTD
+   len_buf_out_zstd = ZSTD_compressBound(page_size);
+#endif
+
    len_buf_out_zlib = compressBound(page_size);
 
-   len_buf_out = MAX(len_buf_out_zlib,
-             MAX(len_buf_out_lzo,
-                 len_buf_out_snappy));
+   len_buf_out = MAX(MAX(len_buf_out_zlib,len_buf_out_zstd),
+           MAX(len_buf_out_lzo,len_buf_out_snappy));
 
    return len_buf_out;
 }
@@ -7235,6 +7241,10 @@ write_kdump_header(void)
 
    if (info->flag_compress & DUMP_DH_COMPRESSED_ZLIB)
        dh->status |= DUMP_DH_COMPRESSED_ZLIB;
+#ifdef USEZSTD
+   else if (info->flag_compress & DUMP_DH_COMPRESSED_ZSTD)
+       dh->status |= DUMP_DH_COMPRESSED_ZSTD;
+#endif
 #ifdef USELZO
    else if (info->flag_compress & DUMP_DH_COMPRESSED_LZO)
        dh->status |= DUMP_DH_COMPRESSED_LZO;
@@ -8589,6 +8599,17 @@ write_kdump_pages_cyclic(struct cache_data *cd_header, struct cache_data *cd_pag
            && (size_out < info->page_size)) {
            pd.flags = DUMP_DH_COMPRESSED_ZLIB;
            pd.size  = size_out;
+#ifdef USEZSTD
+       } else if ((info->flag_compress & DUMP_DH_COMPRESSED_ZSTD)
+               && (size_out = len_buf_out)
+               && (len_buf_out = ZSTD_compress((void *)buf_out,
+                       size_out, (const void *)buf, info->page_size, 1))
+               && (len_buf_out < info->page_size)
+             ) {
+           CHECK_ZSTD(len_buf_out);
+           pd.flags = DUMP_DH_COMPRESSED_ZSTD;
+           pd.size  = len_buf_out;
+#endif
 #ifdef USELZO
        } else if (info->flag_lzo_support
               && (info->flag_compress & DUMP_DH_COMPRESSED_LZO)
@@ -11605,7 +11626,7 @@ main(int argc, char *argv[])
 
    info->block_order = DEFAULT_ORDER;
    message_level = DEFAULT_MSG_LEVEL;
-   while ((opt = getopt_long(argc, argv, "b:cDd:eEFfg:hi:lpRvXx:", longopts,
+   while ((opt = getopt_long(argc, argv, "b:cDd:eEFfg:hi:lpRvXx:z", longopts,
        NULL)) != -1) {
        switch (opt) {
        case OPT_BLOCK_ORDER:
@@ -11617,6 +11638,9 @@ main(int argc, char *argv[])
        case OPT_COMPRESS_ZLIB:
            info->flag_compress = DUMP_DH_COMPRESSED_ZLIB;
            break;
+       case OPT_COMPRESS_ZSTD:
+           info->flag_compress = DUMP_DH_COMPRESSED_ZSTD;
+           break;
        case OPT_DEBUG:
            flag_debug = TRUE;
            break;
makedumpfile.h +1 -1
index 79046f2..3fb1b57 100644
@@ -2463,6 +2463,7 @@ struct elf_prstatus {
 #define OPT_VERSION             'v'
 #define OPT_EXCLUDE_XEN_DOM     'X'
 #define OPT_VMLINUX             'x'
+#define OPT_COMPRESS_ZSTD       'z'
 #define OPT_START               256
 #define OPT_SPLIT               OPT_START+0
 #define OPT_REASSEMBLE          OPT_START+1
--
Quoted 4 lines

1.8.3.1_______________________________________________ kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec

_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec

#2 lore raw
In reply to HAGIO KAZUHITO(萩尾 一仁)
Quoted 11 lines · HAGIO KAZUHITO(萩尾 一仁)

-----Original Message-----

Quoted 4 lines

Date: Tue, 1 Jun 2021 15:43:00 +0800
Subject: [PATCH] add support for zstd

Add support for zstd

Thanks for the patch, but we've worked on the zstd support based on these test patches:
https://github.com/k-hagio/makedumpfile/commit/f6eaf2424f41d8e9af40f7ce67e0f52b387311af
https://github.com/k-hagio/crash/commit/5c55c380120d7b7d450e07c4605aaf330f6219dc

Quoted 4 lines

I would like to proceed with those, please wait for a while.

Coiby, do you have any patch you can share and how is the state? IIRC, your draft patches supported also decompression etc.

The latest work can be found on
https://github.com/coiby/makedumpfile/tree/zstd_context. I've done some simple tests following your previous suggestions. But I still need to do some tests on some huge vmcores to provide a benchmark as suggested by Dave.

Quoted 148 lines

Thanks,
Kazu

Quoted 144 lines
---
 Makefile       |  5 +++++
 diskdump_mod.h |  1 +
 makedumpfile.c | 36 ++++++++++++++++++++++++++++++------
 makedumpfile.h |  1 +
 4 files changed, 37 insertions(+), 6 deletions(-)
Makefile +5 -0
index 5d61a69..725c186 100644
@@ -68,6 +68,11 @@ endif
 CFLAGS += -DUSESNAPPY
 endif
 
+ifeq ($(USEZSTD), on)
+LIBS := -lzstd $(LIBS)
+CFLAGS += -DUSEZSTD
+endif
+
 LIBS := $(LIBS) -lpthread
 
 try-run = $(shell set -e;      \
diskdump_mod.h +1 -0
index 3733953..ffd9ab2 100644
@@ -98,6 +98,7 @@ struct kdump_sub_header {
 #define DUMP_DH_COMPRESSED_INCOMPLETE  0x8
                    /* indicate an incomplete dumpfile */
 #define DUMP_DH_EXCLUDED_VMEMMAP 0x10  /* unused vmemmap pages are excluded */
+#define DUMP_DH_COMPRESSED_ZSTD 0x20
 
 /* descriptor of each page for vmcore */
 typedef struct page_desc {
makedumpfile.c +30 -6
index 894c88e..3b588c3 100644
@@ -26,6 +26,9 @@
 #include <limits.h>
 #include <assert.h>
 #include <zlib.h>
+#ifdef USEZSTD
+#include <zstd.h>
+#endif
 
 struct symbol_table    symbol_table;
 struct size_table  size_table;
@@ -296,10 +299,10 @@ is_cache_page(unsigned long flags)
 static inline unsigned long
 calculate_len_buf_out(long page_size)
 {
-   unsigned long len_buf_out_zlib, len_buf_out_lzo, len_buf_out_snappy;
+   unsigned long len_buf_out_zlib, len_buf_out_lzo, len_buf_out_snappy, len_buf_out_zstd;
    unsigned long len_buf_out;
 
-   len_buf_out_zlib = len_buf_out_lzo = len_buf_out_snappy = 0;
+   len_buf_out_zlib = len_buf_out_lzo = len_buf_out_snappy = len_buf_out_zstd = 0;
 
 #ifdef USELZO
    len_buf_out_lzo = page_size + page_size / 16 + 64 + 3;
@@ -309,11 +312,14 @@ calculate_len_buf_out(long page_size)
    len_buf_out_snappy = snappy_max_compressed_length(page_size);
 #endif
 
+#ifdef USEZSTD
+   len_buf_out_zstd = ZSTD_compressBound(page_size);
+#endif
+
    len_buf_out_zlib = compressBound(page_size);
 
-   len_buf_out = MAX(len_buf_out_zlib,
-             MAX(len_buf_out_lzo,
-                 len_buf_out_snappy));
+   len_buf_out = MAX(MAX(len_buf_out_zlib,len_buf_out_zstd),
+           MAX(len_buf_out_lzo,len_buf_out_snappy));
 
    return len_buf_out;
 }
@@ -7235,6 +7241,10 @@ write_kdump_header(void)
 
    if (info->flag_compress & DUMP_DH_COMPRESSED_ZLIB)
        dh->status |= DUMP_DH_COMPRESSED_ZLIB;
+#ifdef USEZSTD
+   else if (info->flag_compress & DUMP_DH_COMPRESSED_ZSTD)
+       dh->status |= DUMP_DH_COMPRESSED_ZSTD;
+#endif
 #ifdef USELZO
    else if (info->flag_compress & DUMP_DH_COMPRESSED_LZO)
        dh->status |= DUMP_DH_COMPRESSED_LZO;
@@ -8589,6 +8599,17 @@ write_kdump_pages_cyclic(struct cache_data *cd_header, struct cache_data *cd_pag
            && (size_out < info->page_size)) {
            pd.flags = DUMP_DH_COMPRESSED_ZLIB;
            pd.size  = size_out;
+#ifdef USEZSTD
+       } else if ((info->flag_compress & DUMP_DH_COMPRESSED_ZSTD)
+               && (size_out = len_buf_out)
+               && (len_buf_out = ZSTD_compress((void *)buf_out,
+                       size_out, (const void *)buf, info->page_size, 1))
+               && (len_buf_out < info->page_size)
+             ) {
+           CHECK_ZSTD(len_buf_out);
+           pd.flags = DUMP_DH_COMPRESSED_ZSTD;
+           pd.size  = len_buf_out;
+#endif
 #ifdef USELZO
        } else if (info->flag_lzo_support
               && (info->flag_compress & DUMP_DH_COMPRESSED_LZO)
@@ -11605,7 +11626,7 @@ main(int argc, char *argv[])
 
    info->block_order = DEFAULT_ORDER;
    message_level = DEFAULT_MSG_LEVEL;
-   while ((opt = getopt_long(argc, argv, "b:cDd:eEFfg:hi:lpRvXx:", longopts,
+   while ((opt = getopt_long(argc, argv, "b:cDd:eEFfg:hi:lpRvXx:z", longopts,
        NULL)) != -1) {
        switch (opt) {
        case OPT_BLOCK_ORDER:
@@ -11617,6 +11638,9 @@ main(int argc, char *argv[])
        case OPT_COMPRESS_ZLIB:
            info->flag_compress = DUMP_DH_COMPRESSED_ZLIB;
            break;
+       case OPT_COMPRESS_ZSTD:
+           info->flag_compress = DUMP_DH_COMPRESSED_ZSTD;
+           break;
        case OPT_DEBUG:
            flag_debug = TRUE;
            break;
makedumpfile.h +1 -1
index 79046f2..3fb1b57 100644
@@ -2463,6 +2463,7 @@ struct elf_prstatus {
 #define OPT_VERSION             'v'
 #define OPT_EXCLUDE_XEN_DOM     'X'
 #define OPT_VMLINUX             'x'
+#define OPT_COMPRESS_ZSTD       'z'
 #define OPT_START               256
 #define OPT_SPLIT               OPT_START+0
 #define OPT_REASSEMBLE          OPT_START+1
--

1.8.3.1

Signature · 8 lines
Best regards,
Coiby


_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec