xfs: CIL and log optimisations
Subsystems (3)
v5 cover xfs: CIL and log optimisations
Hi folks,
This is an update of the consolidated log scalability patchset I've been working on. Version 4 was posted here:
https://lore.kernel.org/linux-xfs/[email protected]/
This version contains the changes Darrick requested during review. The only patch remaining without at least one RVB tag is patch 30.
Performance improvements are largely documented in the change logs of the individual patches. Headline numbers are an increase in transaction rate from 700k commits/s to 1.7M commits/s, and a reduction in fua/flush operations by 2-3 orders of magnitude on metadata heavy workloads that don't use fsync.
Summary of series:
Patches Modifications
------- -------------
1-7: log write FUA/FLUSH optimisations
8: bug fix
9-11: Async CIL pushes
12-25: xlog_write() rework
26-39: CIL commit scalability
Change log is below.
Cheers,
Dave.
Version 5:
- fix typo in comment (patch 4)
- fix typo in commit msg (patch 7)
- removed unnecessary update of num_iovecs (patch 20)
- fixed whitespace (patch 29)
- removed unused space_used/curr_res from CIL pcp structure (patch 29)
- added space_used to CIL pcp structure (patch 30)
- add comment to xlog_cil_pcp_aggregate() (patch 30)
- added space_reserved to CIL pcp structure (patch 31)
- removed unnecessary commentary about CIL ordering issues from commit msg in patch 33 as patch 35 addresses these issues..
- fix whitespace in xlog_cil_free_logvec() (patch 35)
- fix weird sentence in docco (patch 39)
- propagate changes through patches to fix conflicts due to dependent changes. (various patches)
Version 4:
- rebase on 5.13-rc2+
- fixed completion logic for async cache flush
- trimmed superflous comments about not requiring REQ_PREFLUSH for iclog IO anymore.
- ensure that setting/clearing XLOG_ICL_NEED_FLUSH is atomic (i.e. only modified while holding the icloglock)
- ensure callers only add iclog flush/fua flags appropriately before releasing the iclog so that multiple independent writes to an iclog doesn't clear flags other writes into the iclog depend on.
- buffer log item dirty tracking patches merged so removed from series
- replaced XFS_LSN_CMP() checks with direct lsn1 == lsn2 comparisons to simplify the code
- changed "push_async" to "push_commit_stable" to indicate that the push caller wants the entire CIL checkpoint and commit record to be on stable storage when it completes.
- updated comment to indicate that iclog sync state is set according to the caller's desire for a stable checkpoint to be performed.
- Added comment explaining why the CIL workqueue is limited to 4 concurrent works per filesystem.
- debug overhead reduction patches merged so removed from series
- cleaned up a couple of typedef uses.
- updated pahole output for checkpoint header in commit message
- Added BUILD_BUG_ON() to check the size of unmount records.
- got rid of XFS_VOLUME define.
- got rid of XLOG_TIC_LEN_MAX define.
- cleaned up extra blank lines.
- fixed double initialisation of lv in xlog_write_single().
- removed the unnecessary change for reserved iclog space in xlog_state_get_iclog_space().
- no need to check for XLOG_CONTINUE_TRANS in xlog_write_partial() as it will always be set.
- added a patch for removing the optype parameter from xlog_write()
- removed unused nvecs from struct xfs_cil_ctx
- fixed whitespace damage in xlog_cil_pcp_dead()
- added missing cpu dead accounting transfer in xlog_cil_pcp_dead().
- factored out CIL push percpu structure aggregation into xlog_cil_pcp_aggregate()
- added the ctx->ticket->t_unit_res update back into the code even though it is largely unnecessary.
- cleaned up the pcp, cilpcp, pcptr mess in xlog_cil_pcp_alloc() and elsewhere to use variable names consistently.
- simplified the CIL sort comparison functions to a single comparison operation
- fixed percpu CIL item list sort order where items in the same transaction (order id) were reversed, leading to intents being replayed in the wrong order.
- split out log vector chain conversion to list_head into separate patch
- Updated documentation with all the fixes and suggestions made.
Version 3:
- rebase onto 5.12-rc1+
- aggregate many small dependent patchsets in one large one.
- simplify xlog_wait_on_iclog_lsn() back to just a call to xlog_wait_on_iclog()
- remove xfs_blkdev_issue_flush() instead of moving and renaming it.
- pass bio to xfs_flush_bdev_async() so it doesn't need allocation.
- skip cache flush in xfs_flush_bdev_async() if the underlying queue does not require it.
- fixed whitespace in xfs_flush_bdev_async()
- remove the implicit external log's data device cache flush code and replace it with an explicit flush in the unmount record write so that it works the same as the new CIL checkpoint cache pre-flush mechanism. This mechanism now guarantees metadata vs journal ordering for both internal and external logs.
- updated various commit messages
- fixed incorrect/unintended changes to xfs_log_force() behaviour
- typedef uint64_t xfs_csn_t; and conversion.
- removed stray trace_printk()s that were used for debugging.
- fixed minor formatting details.
- uninlined xlog_prepare_iovec()
- fixed up "lv chain vector and size calculation" commit message to reflect we are only calculating and passin gin the vector byte count.
- reworked the loop in xlog_write_single() based on Christoph's suggestion. Much cleaner!
- added patch to pass log ticket down to xlog_sync() so that it accounts the roundoff to the log ticket rather than directly modifying grant heads. Grant heads are hot, so every little bit helps.
- added patch to update delayed logging design doc with background material on how transactions and log space accounting works in XFS.
Version 2:
- fix ticket reservation roundoff to include 2 roundoffs
- removed stale copied comment from roundoff initialisation.
- clarified "separation" to mean "separation for ordering purposes" in commit message.
- added comment that newly activated, clean, empty iclogs have a LSN of 0 so are captured by the "iclog lsn < start_lsn" case that avoids needing to wait before releasing the commit iclog to be written.
- added async cache flush infrastructure
- convert CIL checkpoint push work it issue an unconditional metadata device cache flush rather than asking the first iclog write to issue it via REQ_PREFLUSH.
- cleaned up xlog_write() to remove a redundant parameter and prepare the logic for setting flags on the iclog based on the type of operational data is being written to the log.
- added XLOG_ICL_NEED_FUA flag to complement the NEED_FLUSH flag, allowing callers to issue explicit flushes and clear the NEED_FLUSH flag before the iclog is written without dropping the REQ_FUA requirement in /dev/null...
- added CIL commit-in-start-iclog optimisation that clears the NEED_FLUSH flag to avoid an unnecessary cache flush when issuing the iclog.
- fixed typo in CIL throttle bugfix comment.
- fixed trailing whitespace in commit message.
PATCH v5 6/39 xfs: remove need_start_rec parameter from xlog_write()
From: Dave Chinner <[email protected]>
The CIL push is the only call to xlog_write that sets this variable to true. The other callers don't need a start rec, and they tell xlog_write what to do by passing the type of ophdr they need written in the flags field. The need_start_rec parameter essentially tells xlog_write to to write an extra ophdr with a XLOG_START_TRANS type, so get rid of the variable to do this and pass XLOG_START_TRANS as the flag value into xlog_write() from the CIL push.
$ size fs/xfs/xfs_log.o* text data bss dec hex filename 27595 560 8 28163 6e03 fs/xfs/xfs_log.o.orig 27454 560 8 28022 6d76 fs/xfs/xfs_log.o.patched
--- fs/xfs/xfs_log.c | 44 +++++++++++++++++++++---------------------- fs/xfs/xfs_log_cil.c | 3 ++- fs/xfs/xfs_log_priv.h | 3 +-- 3 files changed, 25 insertions(+), 25 deletions(-)
fs/xfs/xfs_log.c +22 -22
@@ -820,9 +820,7 @@ xlog_wait_on_iclog(static int xlog_write_unmount_record (struct xlog *log, -struct xlog_ticket *ticket, -xfs_lsn_t *lsn, -uint flags) +struct xlog_ticket *ticket) {struct xfs_unmount_log_format ulf = { .magic =XLOG_UNMOUNT_TYPE ,
@@ -839,7 +837,7 @@ xlog_write_unmount_record(/* account for space used by record data */ ticket->t_curr_res -=sizeof (ulf); -return xlog_write (log, &vec, ticket, lsn,NULL , flags, false); +return xlog_write (log, &vec, ticket,NULL ,NULL ,XLOG_UNMOUNT_TRANS ); }/*
@@ -853,15 +851,13 @@ xlog_unmount_write(struct xfs_mount *mp = log->l_mp;struct xlog_in_core *iclog;struct xlog_ticket *tic =NULL ; -xfs_lsn_t lsn; -uint flags =XLOG_UNMOUNT_TRANS ;int error; error =xfs_log_reserve (mp,600 ,1 , &tic,XFS_LOG ,0 );if (error) goto out_err; - error =xlog_write_unmount_record (log, tic, &lsn, flags); + error =xlog_write_unmount_record (log, tic);/* * At this point, we're umounting anyway, so there's no point in * transitioning log state to IOERROR. Just continue...
@@ -1553,8 +1549,7 @@ xlog_commit_record(if (XLOG_FORCED_SHUTDOWN (log))return -EIO ; - error =xlog_write (log, &vec, ticket, lsn, iclog,XLOG_COMMIT_TRANS , - false); + error =xlog_write (log, &vec, ticket, lsn, iclog,XLOG_COMMIT_TRANS );if (error)xfs_force_shutdown (log->l_mp,SHUTDOWN_LOG_IO_ERROR );return error;
@@ -2151,13 +2146,16 @@ static intxlog_write_calc_vec_length ( struct xlog_ticket *ticket, struct xfs_log_vec *log_vector, - bool need_start_rec) + uint optype) { struct xfs_log_vec *lv; -int headers = need_start_rec ?1 :0 ; +int headers =0 ;int len =0 ;int i; +if (optype &XLOG_START_TRANS ) + headers++; +for (lv = log_vector; lv; lv = lv->lv_next) {/* we don't write ordered log vectors */ if (lv->lv_buf_len ==XFS_LOG_VEC_ORDERED )
@@ -2377,8 +2375,7 @@ xlog_write(struct xlog_ticket *ticket, xfs_lsn_t *start_lsn, struct xlog_in_core **commit_iclog, - uint flags, - bool need_start_rec) + uint optype) { struct xlog_in_core *iclog = NULL;struct xfs_log_vec *lv = log_vector;
@@ -2406,8 +2403,9 @@ xlog_write(xfs_force_shutdown (log->l_mp,SHUTDOWN_LOG_IO_ERROR ); } - len =xlog_write_calc_vec_length (ticket, log_vector, need_start_rec); - *start_lsn =0 ; + len =xlog_write_calc_vec_length (ticket, log_vector, optype); +if (start_lsn) + *start_lsn =0 ;while (lv && (!lv->lv_niovecs || index < lv->lv_niovecs)) {void *ptr;int log_offset;
@@ -2421,7 +2419,7 @@ xlog_write( ptr = iclog->ic_datap + log_offset;/* start_lsn is the first lsn written to. That's all we need. */ -if (!*start_lsn) +if (start_lsn && !*start_lsn) *start_lsn =be64_to_cpu (iclog->ic_header.h_lsn);/*
@@ -2434,6 +2432,7 @@ xlog_write(int copy_len;int copy_off;bool ordered = false; +bool wrote_start_rec = false;/* ordered log vectors have no regions to write */ if (lv->lv_buf_len ==XFS_LOG_VEC_ORDERED ) {
@@ -2451,13 +2450,15 @@ xlog_write(* write a start record. Only do this for the first * iclog we write to. */ -if (need_start_rec) { +if (optype &XLOG_START_TRANS ) {xlog_write_start_rec (ptr, ticket);xlog_write_adv_cnt (&ptr, &len, &log_offset,sizeof (struct xlog_op_header )); + optype &= ~XLOG_START_TRANS ; + wrote_start_rec = true; } - ophdr =xlog_write_setup_ophdr (log, ptr, ticket, flags); + ophdr =xlog_write_setup_ophdr (log, ptr, ticket, optype);if (!ophdr)return -EIO ;
@@ -2488,14 +2489,13 @@ xlog_write( } copy_len +=sizeof (struct xlog_op_header ); record_cnt++; -if (need_start_rec) { +if (wrote_start_rec) { copy_len +=sizeof (struct xlog_op_header ); record_cnt++; - need_start_rec = false; } data_cnt += contwr ? copy_len :0 ; - error = xlog_write_copy_finish(log, iclog, flags, + error = xlog_write_copy_finish(log, iclog, optype, &record_cnt, &data_cnt, &partial_copy, &partial_copy_len,
@@ -2539,7 +2539,7 @@ xlog_write(spin_lock (&log->l_icloglock);xlog_state_finish_copy (log, iclog, record_cnt, data_cnt);if (commit_iclog) { -ASSERT (flags &XLOG_COMMIT_TRANS ); +ASSERT (optype &XLOG_COMMIT_TRANS ); *commit_iclog = iclog; }else { error =xlog_state_release_iclog (log, iclog);
fs/xfs/xfs_log_cil.c +2 -1
@@ -823,7 +823,8 @@ xlog_cil_push_work(*/ wait_for_completion (&bdev_flush); - error =xlog_write (log, &lvhdr, tic, &ctx->start_lsn,NULL ,0 , true); + error =xlog_write (log, &lvhdr, tic, &ctx->start_lsn,NULL , +XLOG_START_TRANS );if (error) goto out_abort_free_ticket;
fs/xfs/xfs_log_priv.h +1 -2
@@ -480,8 +480,7 @@ void xlog_print_tic_res(struct xfs_mount *mp, struct xlog_ticket *ticket);void xlog_print_trans (struct xfs_trans *);int xlog_write (struct xlog *log,struct xfs_log_vec *log_vector,struct xlog_ticket *tic,xfs_lsn_t *start_lsn, -struct xlog_in_core **commit_iclog,uint flags, -bool need_start_rec); +struct xlog_in_core **commit_iclog,uint optype);int xlog_commit_record (struct xlog *log,struct xlog_ticket *ticket,struct xlog_in_core **iclog,xfs_lsn_t *lsn);void xfs_log_ticket_ungrant (struct xlog *log,struct xlog_ticket *ticket);
Signature · 1 line
2.31.1
PATCH v5 14/39 xfs: embed the xlog_op_header in the unmount record
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Remove another case where xlog_write() has to prepend an opheader to a log transaction. The unmount record + ophdr is smaller than the minimum amount of space guaranteed to be free in an iclog (2 * sizeof(ophdr)) and so we don't have to care about an unmount record being split across 2 iclogs.
--- fs/xfs/xfs_log.c | 39 ++++++++++++++++++++++++++++----------- 1 file changed, 28 insertions(+), 11 deletions(-)
fs/xfs/xfs_log.c +28 -11
@@ -800,12 +800,22 @@ xlog_write_unmount_record( struct xlog *log, struct xlog_ticket *ticket) { - struct xfs_unmount_log_format ulf = { - .magic =XLOG_UNMOUNT_TYPE , +struct { +struct xlog_op_header ophdr; +struct xfs_unmount_log_format ulf; + } unmount_rec = { + .ophdr = { + .oh_clientid =XFS_LOG , + .oh_tid =cpu_to_be32 (ticket->t_tid), + .oh_flags =XLOG_UNMOUNT_TRANS , + }, + .ulf = { + .magic =XLOG_UNMOUNT_TYPE , + }, };struct xfs_log_iovec reg = { - .i_addr = &ulf, - .i_len =sizeof (ulf), + .i_addr = &unmount_rec, + .i_len =sizeof (unmount_rec), .i_type =XLOG_REG_TYPE_UNMOUNT , };struct xfs_log_vec vec = {
@@ -813,8 +823,12 @@ xlog_write_unmount_record( .lv_iovecp = ®, }; +BUILD_BUG_ON ((sizeof (struct xlog_op_header ) + +sizeof (struct xfs_unmount_log_format )) != +sizeof (unmount_rec)); +/* account for space used by record data */ - ticket->t_curr_res -=sizeof (ulf); + ticket->t_curr_res -=sizeof (unmount_rec);/* * For external log devices, we need to flush the data device cache
@@ -2145,6 +2159,8 @@ xlog_write_calc_vec_length(/* Don't account for regions with embedded ophdrs */ if (optype && headers >0 ) { +if (optype &XLOG_UNMOUNT_TRANS ) + headers--;if (optype &XLOG_START_TRANS ) {ASSERT (headers >=2 ); headers -=2 ;
@@ -2359,12 +2375,11 @@ xlog_write(/* * If this is a commit or unmount transaction, we don't need a start -* record to be written. We do, however, have to account for the -* commit or unmount header that gets written. Hence we always have -* to account for an extra xlog_op_header here for commit and unmount -* records. +* record to be written. We do, however, have to account for the commit +* header that gets written. Hence we always have to account for an +* extra xlog_op_header here for commit records. */ -if (optype & (XLOG_COMMIT_TRANS |XLOG_UNMOUNT_TRANS )) +if (optype &XLOG_COMMIT_TRANS ) ticket->t_curr_res -=sizeof (struct xlog_op_header );if (ticket->t_curr_res <0 ) { xfs_alert_tag(log->l_mp, XFS_PTAG_LOGRES,
@@ -2424,6 +2439,8 @@ xlog_write( ophdr = reg->i_addr;if (index) optype &= ~XLOG_START_TRANS ; + }else if (optype &XLOG_UNMOUNT_TRANS ) { + ophdr = reg->i_addr; }else { ophdr =xlog_write_setup_ophdr (log, ptr, ticket, optype);
@@ -2454,7 +2471,7 @@ xlog_write(/* * Copy region. * -* Commit and unmount records just log an opheader, so +* Commit records just log an opheader, so * we can have empty payloads with no data region to * copy. Hence we only copy the payload if the vector * says it has data to copy.
Signature · 1 line
2.31.1
PATCH v5 22/39 xfs:_introduce xlog_write_partial()
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Handle writing of a logvec chain into an iclog that doesn't have enough space to fit it all. The iclog has already been changed to WANT_SYNC by xlog_get_iclog_space(), so the entire remaining space in the iclog is exclusively owned by this logvec chain.
The difference between the single and partial cases is that we end up with partial iovec writes in the iclog and have to split a log vec regions across two iclogs. The state handling for this is currently awful and so we're building up the pieces needed to handle this more cleanly one at a time.
--- fs/xfs/xfs_log.c | 504 ++++++++++++++++++++++------------------------- 1 file changed, 240 insertions(+), 264 deletions(-)
fs/xfs/xfs_log.c +240 -264
@@ -2110,166 +2110,250 @@ xlog_print_trans( } } -static xlog_op_header_t * -xlog_write_setup_ophdr ( -struct xlog_op_header *ophdr, -struct xlog_ticket *ticket) -{ - ophdr->oh_clientid =XFS_TRANSACTION ; - ophdr->oh_res2 =0 ; - ophdr->oh_flags =0 ; -return ophdr; -} -/* -* Set up the parameters of the region copy into the log. This has -* to handle region write split across multiple log buffers - this -* state is kept external to this function so that this code can -* be written in an obvious, self documenting manner. +* Write whole log vectors into a single iclog which is guaranteed to have +* either sufficient space for the entire log vector chain to be written or +* exclusive access to the remaining space in the iclog. +* +* Return the number of iovecs and data written into the iclog, as well as +* a pointer to the logvec that doesn't fit in the log (or NULL if we hit the +* end of the chain. */ -static int -xlog_write_setup_copy ( +static struct xfs_log_vec * +xlog_write_single ( +struct xfs_log_vec *log_vector,struct xlog_ticket *ticket, -struct xlog_op_header *ophdr, -int space_available, -int space_required, -int *copy_off, -int *copy_len, -int *last_was_partial_copy, -int *bytes_consumed) -{ -int still_to_copy; - - still_to_copy = space_required - *bytes_consumed; - *copy_off = *bytes_consumed; - -if (still_to_copy <= space_available) { -/* write of region completes here */ - *copy_len = still_to_copy; - ophdr->oh_len =cpu_to_be32 (*copy_len); -if (*last_was_partial_copy) - ophdr->oh_flags |= (XLOG_END_TRANS |XLOG_WAS_CONT_TRANS ); - *last_was_partial_copy =0 ; - *bytes_consumed =0 ; -return 0 ; - } - -/* partial write of region, needs extra log op header reservation */ - *copy_len = space_available; - ophdr->oh_len =cpu_to_be32 (*copy_len); - ophdr->oh_flags |=XLOG_CONTINUE_TRANS ; -if (*last_was_partial_copy) - ophdr->oh_flags |=XLOG_WAS_CONT_TRANS ; - *bytes_consumed += *copy_len; - (*last_was_partial_copy)++; - -/* account for new log op header */ - ticket->t_curr_res -=sizeof (struct xlog_op_header ); - -return sizeof (struct xlog_op_header ); -} - -static int -xlog_write_copy_finish ( -struct xlog *log,struct xlog_in_core *iclog, -uint flags, -int *record_cnt, -int *data_cnt, -int *partial_copy, -int *partial_copy_len, -int log_offset, -struct xlog_in_core **commit_iclog) +uint32_t *log_offset, +uint32_t *len, +uint32_t *record_cnt, +uint32_t *data_cnt) { -int error; +struct xfs_log_vec *lv; +void *ptr; +int index; + +ASSERT (*log_offset + *len <= iclog->ic_size || + iclog->ic_state ==XLOG_STATE_WANT_SYNC ); -if (*partial_copy) { + ptr = iclog->ic_datap + *log_offset; +for (lv = log_vector; lv; lv = lv->lv_next) {/* -* This iclog has already been marked WANT_SYNC by -* xlog_state_get_iclog_space. +* If the entire log vec does not fit in the iclog, punt it to +* the partial copy loop which can handle this case. */ -spin_lock (&log->l_icloglock); -xlog_state_finish_copy (log, iclog, *record_cnt, *data_cnt); - *record_cnt =0 ; - *data_cnt =0 ; - goto release_iclog; - } +if (lv->lv_niovecs && + lv->lv_bytes > iclog->ic_size - *log_offset) +break ; - *partial_copy =0 ; - *partial_copy_len =0 ; +/* +* Ordered log vectors have no regions to write so this +* loop will naturally skip them. +*/ +for (index =0 ; index < lv->lv_niovecs; index++) { +struct xfs_log_iovec *reg = &lv->lv_iovecp[index]; +struct xlog_op_header *ophdr = reg->i_addr; -if (iclog->ic_size - log_offset <=sizeof (xlog_op_header_t)) { -/* no more space in this iclog - push it. */ -spin_lock (&log->l_icloglock); -xlog_state_finish_copy (log, iclog, *record_cnt, *data_cnt); - *record_cnt =0 ; - *data_cnt =0 ; +ASSERT (reg->i_len %sizeof (int32_t ) ==0 ); +ASSERT ((unsigned long )ptr %sizeof (int32_t ) ==0 ); -if (iclog->ic_state ==XLOG_STATE_ACTIVE ) -xlog_state_switch_iclogs (log, iclog,0 ); -else -ASSERT (iclog->ic_state ==XLOG_STATE_WANT_SYNC || - iclog->ic_state ==XLOG_STATE_IOERROR ); -if (!commit_iclog) - goto release_iclog; -spin_unlock (&log->l_icloglock); -ASSERT (flags &XLOG_COMMIT_TRANS ); - *commit_iclog = iclog; + ophdr->oh_tid =cpu_to_be32 (ticket->t_tid); + ophdr->oh_len =cpu_to_be32 (reg->i_len - +sizeof (struct xlog_op_header )); +memcpy (ptr, reg->i_addr, reg->i_len); +xlog_write_adv_cnt (&ptr, len, log_offset, reg->i_len); + (*record_cnt)++; + *data_cnt += reg->i_len; + } } +ASSERT (*len ==0 || lv); +return lv; +} -return 0 ; +static int +xlog_write_get_more_iclog_space ( +struct xlog *log, +struct xlog_ticket *ticket, +struct xlog_in_core **iclogp, +uint32_t *log_offset, +uint32_t len, +uint32_t *record_cnt, +uint32_t *data_cnt, +int *contwr) +{ +struct xlog_in_core *iclog = *iclogp; +int error; -release_iclog: +spin_lock (&log->l_icloglock); +xlog_state_finish_copy (log, iclog, *record_cnt, *data_cnt); +ASSERT (iclog->ic_state ==XLOG_STATE_WANT_SYNC || + iclog->ic_state ==XLOG_STATE_IOERROR ); error =xlog_state_release_iclog (log, iclog);spin_unlock (&log->l_icloglock); -return error; +if (error) +return error; + + error =xlog_state_get_iclog_space (log, len, &iclog, + ticket, contwr, log_offset); +if (error) +return error; + *record_cnt =0 ; + *data_cnt =0 ; + *iclogp = iclog; +return 0 ; }/* -* Write log vectors into a single iclog which is guaranteed by the caller -* to have enough space to write the entire log vector into. Return the number -* of log vectors written into the iclog. +* Write log vectors into a single iclog which is smaller than the current chain +* length. We write until we cannot fit a full record into the remaining space +* and then stop. We return the log vector that is to be written that cannot +* wholly fit in the iclog. */ -static int -xlog_write_single ( +static struct xfs_log_vec * +xlog_write_partial ( +struct xlog *log,struct xfs_log_vec *log_vector,struct xlog_ticket *ticket, -struct xlog_in_core *iclog, -uint32_t log_offset, -uint32_t len) +struct xlog_in_core **iclogp, +uint32_t *log_offset, +uint32_t *len, +uint32_t *record_cnt, +uint32_t *data_cnt, +int *contwr) { -struct xfs_log_vec *lv; +struct xlog_in_core *iclog = *iclogp; +struct xfs_log_vec *lv = log_vector; +struct xfs_log_iovec *reg; +struct xlog_op_header *ophdr;void *ptr;int index =0 ; -int record_cnt =0 ; +uint32_t rlen; +int error; -ASSERT (log_offset + len <= iclog->ic_size); +/* walk the logvec, copying until we run out of space in the iclog */ + ptr = iclog->ic_datap + *log_offset; +for (index =0 ; index < lv->lv_niovecs; index++) { +uint32_t reg_offset =0 ; + + reg = &lv->lv_iovecp[index]; +ASSERT (reg->i_len %sizeof (int32_t ) ==0 ); - ptr = iclog->ic_datap + log_offset; -for (lv = log_vector; lv; lv = lv->lv_next) {/* -* Ordered log vectors have no regions to write so this -* loop will naturally skip them. +* The first region of a continuation must have a non-zero +* length otherwise log recovery will just skip over it and +* start recovering from the next opheader it finds. Because we +* mark the next opheader as a continuation, recovery will then +* incorrectly add the continuation to the previous region and +* that breaks stuff. +* +* Hence if there isn't space for region data after the +* opheader, then we need to start afresh with a new iclog. */ -for (index =0 ; index < lv->lv_niovecs; index++) { -struct xfs_log_iovec *reg = &lv->lv_iovecp[index]; -struct xlog_op_header *ophdr = reg->i_addr; +if (iclog->ic_size - *log_offset <= +sizeof (struct xlog_op_header )) { + error =xlog_write_get_more_iclog_space (log, ticket, + &iclog, log_offset, *len, record_cnt, + data_cnt, contwr); +if (error) +return ERR_PTR (error); + ptr = iclog->ic_datap + *log_offset; + } -ASSERT (reg->i_len %sizeof (int32_t ) ==0 ); -ASSERT ((unsigned long )ptr %sizeof (int32_t ) ==0 ); + ophdr = reg->i_addr; + rlen =min_t (uint32_t, reg->i_len, iclog->ic_size - *log_offset); + + ophdr->oh_tid =cpu_to_be32 (ticket->t_tid); + ophdr->oh_len =cpu_to_be32 (rlen -sizeof (struct xlog_op_header )); +if (rlen != reg->i_len) + ophdr->oh_flags |=XLOG_CONTINUE_TRANS ; + +ASSERT ((unsigned long )ptr %sizeof (int32_t ) ==0 ); +xlog_verify_dest_ptr (log, ptr); +memcpy (ptr, reg->i_addr, rlen); +xlog_write_adv_cnt (&ptr, len, log_offset, rlen); + (*record_cnt)++; + *data_cnt += rlen; + +/* If we wrote the whole region, move to the next. */ +if (rlen == reg->i_len) +continue ; + +/* +* We now have a partially written iovec, but it can span +* multiple iclogs so we loop here. First we release the iclog +* we currently have, then we get a new iclog and add a new +* opheader. Then we continue copying from where we were until +* we either complete the iovec or fill the iclog. If we +* complete the iovec, then we increment the index and go right +* back to the top of the outer loop. if we fill the iclog, we +* run the inner loop again. +* +* This is complicated by the tail of a region using all the +* space in an iclog and hence requiring us to release the iclog +* and get a new one before returning to the outer loop. We must +* always guarantee that we exit this inner loop with at least +* space for log transaction opheaders left in the current +* iclog, hence we cannot just terminate the loop at the end +* of the of the continuation. So we loop while there is no +* space left in the current iclog, and check for the end of the +* continuation after getting a new iclog. +*/ +do { +/* +* Account for the continuation opheader before we get +* a new iclog. This is necessary so that we reserve +* space in the iclog for it. +*/ + *len +=sizeof (struct xlog_op_header ); + ticket->t_curr_res -=sizeof (struct xlog_op_header ); + + error =xlog_write_get_more_iclog_space (log, ticket, + &iclog, log_offset, *len, record_cnt, + data_cnt, contwr); +if (error) +return ERR_PTR (error); + ptr = iclog->ic_datap + *log_offset; + ophdr = ptr; ophdr->oh_tid =cpu_to_be32 (ticket->t_tid); - ophdr->oh_len =cpu_to_be32 (reg->i_len - + ophdr->oh_clientid =XFS_TRANSACTION ; + ophdr->oh_res2 =0 ; + ophdr->oh_flags =XLOG_WAS_CONT_TRANS ; + +xlog_write_adv_cnt (&ptr, len, log_offset,sizeof (struct xlog_op_header )); -memcpy (ptr, reg->i_addr, reg->i_len); -xlog_write_adv_cnt (&ptr, &len, &log_offset, reg->i_len); - record_cnt++; - } + *data_cnt +=sizeof (struct xlog_op_header ); + +/* +* If rlen fits in the iclog, then end the region +* continuation. Otherwise we're going around again. +*/ + reg_offset += rlen; + rlen = reg->i_len - reg_offset; +if (rlen <= iclog->ic_size - *log_offset) + ophdr->oh_flags |=XLOG_END_TRANS ; +else + ophdr->oh_flags |=XLOG_CONTINUE_TRANS ; + + rlen =min_t (uint32_t, rlen, iclog->ic_size - *log_offset); + ophdr->oh_len =cpu_to_be32 (rlen); + +xlog_verify_dest_ptr (log, ptr); +memcpy (ptr, reg->i_addr + reg_offset, rlen); +xlog_write_adv_cnt (&ptr, len, log_offset, rlen); + (*record_cnt)++; + *data_cnt += rlen; + + }while (ophdr->oh_flags &XLOG_CONTINUE_TRANS ); } -ASSERT (len ==0 ); -return record_cnt; -} +/* +* No more iovecs remain in this logvec so return the next log vec to +* the caller so it can go back to fast path copying. +*/ + *iclogp = iclog; +return lv->lv_next; +}/* * Write some region out to in-core log
@@ -2323,14 +2407,11 @@ xlog_write( {struct xlog_in_core *iclog =NULL ;struct xfs_log_vec *lv = log_vector; -struct xfs_log_iovec *vecp = lv->lv_iovecp; -int index =0 ; -int partial_copy =0 ; -int partial_copy_len =0 ;int contwr =0 ;int record_cnt =0 ;int data_cnt =0 ;int error =0 ; +int log_offset;if (ticket->t_curr_res <0 ) { xfs_alert_tag(log->l_mp, XFS_PTAG_LOGRES,
@@ -2339,146 +2420,40 @@ xlog_write(xfs_force_shutdown (log->l_mp,SHUTDOWN_LOG_IO_ERROR ); } -if (start_lsn) - *start_lsn =0 ; -while (lv && (!lv->lv_niovecs || index < lv->lv_niovecs)) { -void *ptr; -int log_offset; - - error =xlog_state_get_iclog_space (log, len, &iclog, ticket, - &contwr, &log_offset); -if (error) -return error; - -ASSERT (log_offset <= iclog->ic_size -1 ); + error =xlog_state_get_iclog_space (log, len, &iclog, ticket, + &contwr, &log_offset); +if (error) +return error; -/* Start_lsn is the first lsn written to. */ -if (start_lsn && !*start_lsn) - *start_lsn =be64_to_cpu (iclog->ic_header.h_lsn); +/* start_lsn is the LSN of the first iclog written to. */ +if (start_lsn) + *start_lsn =be64_to_cpu (iclog->ic_header.h_lsn); -/* If this is a single iclog write, go fast... */ -if (!contwr && lv == log_vector) { - record_cnt =xlog_write_single (lv, ticket, iclog, - log_offset, len); - len =0 ; - data_cnt = len; +while (lv) { + lv =xlog_write_single (lv, ticket, iclog, &log_offset, + &len, &record_cnt, &data_cnt); +if (!lv)break ; - } - -/* -* This loop writes out as many regions as can fit in the amount -* of space which was allocated by xlog_state_get_iclog_space(). -*/ - ptr = iclog->ic_datap + log_offset; -while (lv && (!lv->lv_niovecs || index < lv->lv_niovecs)) { -struct xfs_log_iovec *reg; -struct xlog_op_header *ophdr; -int copy_len; -int copy_off; -bool ordered = false; -bool added_ophdr = false; - -/* ordered log vectors have no regions to write */ -if (lv->lv_buf_len ==XFS_LOG_VEC_ORDERED ) { -ASSERT (lv->lv_niovecs ==0 ); - ordered = true; - goto next_lv; - } - - reg = &vecp[index]; -ASSERT (reg->i_len %sizeof (int32_t ) ==0 ); -ASSERT ((unsigned long )ptr %sizeof (int32_t ) ==0 ); - -/* -* Regions always have their ophdr at the start of the -* region, except for: -* - a transaction start which has a start record ophdr -* before the first region ophdr; and -* - the previous region didn't fully fit into an iclog -* so needs a continuation ophdr to prepend the region -* in this new iclog. -*/ - ophdr = reg->i_addr; -if (optype && index) { - optype &= ~XLOG_START_TRANS ; - }else if (partial_copy) { - ophdr =xlog_write_setup_ophdr (ptr, ticket); -xlog_write_adv_cnt (&ptr, &len, &log_offset, -sizeof (struct xlog_op_header )); - added_ophdr = true; - } - ophdr->oh_tid =cpu_to_be32 (ticket->t_tid); - - len +=xlog_write_setup_copy (ticket, ophdr, - iclog->ic_size-log_offset, - reg->i_len, - ©_off, ©_len, - &partial_copy, - &partial_copy_len); -xlog_verify_dest_ptr (log, ptr); - -/* -* Wart: need to update length in embedded ophdr not -* to include it's own length. -*/ -if (!added_ophdr) { - ophdr->oh_len =cpu_to_be32 (copy_len - -sizeof (struct xlog_op_header )); - } - -ASSERT (copy_len >0 ); -memcpy (ptr, reg->i_addr + copy_off, copy_len); -xlog_write_adv_cnt (&ptr, &len, &log_offset, copy_len); - -if (added_ophdr) - copy_len +=sizeof (struct xlog_op_header ); - record_cnt++; - data_cnt += contwr ? copy_len :0 ; - - error =xlog_write_copy_finish (log, iclog, optype, - &record_cnt, &data_cnt, - &partial_copy, - &partial_copy_len, - log_offset, - commit_iclog); -if (error) -return error; - -/* -* if we had a partial copy, we need to get more iclog -* space but we don't want to increment the region -* index because there is still more is this region to -* write. -* -* If we completed writing this region, and we flushed -* the iclog (indicated by resetting of the record -* count), then we also need to get more log space. If -* this was the last record, though, we are done and -* can just return. -*/ -if (partial_copy) -break ; - -if (++index == lv->lv_niovecs) { -next_lv: - lv = lv->lv_next; - index =0 ; -if (lv) - vecp = lv->lv_iovecp; - } -if (record_cnt ==0 && !ordered) { -if (!lv) -return 0 ; -break ; - } +ASSERT (!(optype & (XLOG_COMMIT_TRANS |XLOG_UNMOUNT_TRANS ))); + lv =xlog_write_partial (log, lv, ticket, &iclog, &log_offset, + &len, &record_cnt, &data_cnt, &contwr); +if (IS_ERR_OR_NULL (lv)) { + error =PTR_ERR_OR_ZERO (lv); +break ; } } +ASSERT ((len ==0 && !lv) || error); -ASSERT (len ==0 ); - +/* +* We've already been guaranteed that the last writes will fit inside +* the current iclog, and hence it will already have the space used by +* those writes accounted to it. Hence we do not need to update the +* iclog with the number of bytes written here. +*/ +ASSERT (!contwr ||XLOG_FORCED_SHUTDOWN (log));spin_lock (&log->l_icloglock); -xlog_state_finish_copy (log, iclog, record_cnt, data_cnt); +xlog_state_finish_copy (log, iclog, record_cnt,0 );if (commit_iclog) {ASSERT (optype &XLOG_COMMIT_TRANS ); *commit_iclog = iclog;
@@ -3633,11 +3608,12 @@ xlog_verify_iclog( iclog->ic_header.h_cycle_data[idx]); } } -if (clientid !=XFS_TRANSACTION && clientid !=XFS_LOG ) +if (clientid !=XFS_TRANSACTION && clientid !=XFS_LOG ) {xfs_warn (log->l_mp, -"%s: invalid clientid %d op " PTR_FMT " offset 0x%lx" , - __func__, clientid, ophead, +"%s: op %d invalid clientid %d op " PTR_FMT " offset 0x%lx" , + __func__, i, clientid, ophead, (unsigned long )field_offset); + }/* check length */ p = &ophead->oh_len;
Signature · 1 line
2.31.1
PATCH v5 13/39 xfs: only CIL pushes require a start record
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
So move the one-off start record writing in xlog_write() out into the static header that the CIL push builds to write into the log initially. This simplifes the xlog_write() logic a lot.
pahole on x86-64 confirms that the xlog_cil_trans_hdr is correctly 32 bit aligned and packed for copying the log op and transaction headers directly into the log as a single log region copy.
struct xlog_cil_trans_hdr {
struct xlog_op_header oph[2]; /* 0 24 */
struct xfs_trans_header thdr; /* 24 16 */
struct xfs_log_iovec lhdr[2]; /* 40 32 */ /* size: 72, cachelines: 2, members: 3 */
/* last cacheline: 8 bytes */
};A wart is needed to handle the fact that length of the region the opheader points to doesn't include the opheader length. hence if we embed the opheader, we have to substract the opheader length from the length written into the opheader by the generic copying code. This will eventually go away when everything is converted to embedded opheaders.
--- fs/xfs/xfs_log.c | 90 ++++++++++++++++++++++---------------------- fs/xfs/xfs_log_cil.c | 44 ++++++++++++++++++---- 2 files changed, 81 insertions(+), 53 deletions(-)
fs/xfs/xfs_log.c +45 -45
@@ -2113,9 +2113,9 @@ xlog_print_trans( }/* -* Calculate the potential space needed by the log vector. We may need a start -* record, and each region gets its own struct xlog_op_header and may need to be -* double word aligned. +* Calculate the potential space needed by the log vector. If this is a start +* transaction, the caller has already accounted for both opheaders in the start +* transaction, so we don't need to account for them here. */ static int xlog_write_calc_vec_length(
@@ -2128,9 +2128,6 @@ xlog_write_calc_vec_length(int len =0 ;int i; -if (optype &XLOG_START_TRANS ) - headers++; -for (lv = log_vector; lv; lv = lv->lv_next) {/* we don't write ordered log vectors */ if (lv->lv_buf_len ==XFS_LOG_VEC_ORDERED )
@@ -2146,24 +2143,20 @@ xlog_write_calc_vec_length( } } +/* Don't account for regions with embedded ophdrs */ +if (optype && headers >0 ) { +if (optype &XLOG_START_TRANS ) { +ASSERT (headers >=2 ); + headers -=2 ; + } + } + ticket->t_res_num_ophdrs += headers; len += headers *sizeof (struct xlog_op_header );return len; } -static void -xlog_write_start_rec ( -struct xlog_op_header *ophdr, -struct xlog_ticket *ticket) -{ - ophdr->oh_tid =cpu_to_be32 (ticket->t_tid); - ophdr->oh_clientid = ticket->t_clientid; - ophdr->oh_len =0 ; - ophdr->oh_flags =XLOG_START_TRANS ; - ophdr->oh_res2 =0 ; -} -static xlog_op_header_t * xlog_write_setup_ophdr( struct xlog *log,
@@ -2368,9 +2361,11 @@ xlog_write(* If this is a commit or unmount transaction, we don't need a start * record to be written. We do, however, have to account for the * commit or unmount header that gets written. Hence we always have -* to account for an extra xlog_op_header here. +* to account for an extra xlog_op_header here for commit and unmount +* records. */ - ticket->t_curr_res -=sizeof (struct xlog_op_header ); +if (optype & (XLOG_COMMIT_TRANS |XLOG_UNMOUNT_TRANS )) + ticket->t_curr_res -=sizeof (struct xlog_op_header );if (ticket->t_curr_res <0 ) {xfs_alert_tag (log->l_mp,XFS_PTAG_LOGRES ,"ctx ticket reservation ran out. Need to up reservation" );
@@ -2407,7 +2402,7 @@ xlog_write(int copy_len;int copy_off;bool ordered = false; -bool wrote_start_rec = false; +bool added_ophdr = false;/* ordered log vectors have no regions to write */ if (lv->lv_buf_len ==XFS_LOG_VEC_ORDERED ) {
@@ -2421,25 +2416,24 @@ xlog_write(ASSERT ((unsigned long )ptr %sizeof (int32_t ) ==0 );/* -* Before we start formatting log vectors, we need to -* write a start record. Only do this for the first -* iclog we write to. +* The XLOG_START_TRANS has embedded ophdrs for the +* start record and transaction header. They will always +* be the first two regions in the lv chain. */ if (optype &XLOG_START_TRANS ) { -xlog_write_start_rec (ptr, ticket); -xlog_write_adv_cnt (&ptr, &len, &log_offset, -sizeof (struct xlog_op_header )); - optype &= ~XLOG_START_TRANS ; - wrote_start_rec = true; - } - - ophdr =xlog_write_setup_ophdr (log, ptr, ticket, optype); -if (!ophdr) -return -EIO ; + ophdr = reg->i_addr; +if (index) + optype &= ~XLOG_START_TRANS ; + }else { + ophdr =xlog_write_setup_ophdr (log, ptr, + ticket, optype); +if (!ophdr) +return -EIO ; -xlog_write_adv_cnt (&ptr, &len, &log_offset, +xlog_write_adv_cnt (&ptr, &len, &log_offset,sizeof (struct xlog_op_header )); - + added_ophdr = true; + } len += xlog_write_setup_copy(ticket, ophdr, iclog->ic_size-log_offset, reg->i_len,
@@ -2448,13 +2442,22 @@ xlog_write( &partial_copy_len);xlog_verify_dest_ptr (log, ptr); + +/* +* Wart: need to update length in embedded ophdr not +* to include it's own length. +*/ +if (!added_ophdr) { + ophdr->oh_len =cpu_to_be32 (copy_len - +sizeof (struct xlog_op_header )); + }/* * Copy region. * -* Unmount records just log an opheader, so can have -* empty payloads with no data region to copy. Hence we -* only copy the payload if the vector says it has data -* to copy. +* Commit and unmount records just log an opheader, so +* we can have empty payloads with no data region to +* copy. Hence we only copy the payload if the vector +* says it has data to copy. */ ASSERT (copy_len >=0 );if (copy_len >0 ) {
@@ -2462,12 +2465,9 @@ xlog_write(xlog_write_adv_cnt (&ptr, &len, &log_offset, copy_len); } - copy_len +=sizeof (struct xlog_op_header ); - record_cnt++; -if (wrote_start_rec) { +if (added_ophdr) copy_len +=sizeof (struct xlog_op_header ); - record_cnt++; - } + record_cnt++; data_cnt += contwr ? copy_len :0 ; error = xlog_write_copy_finish(log, iclog, optype,
fs/xfs/xfs_log_cil.c +36 -8
70 lines not on this page · raw message
Signature · 1 line
2.31.1
PATCH v5 15/39 xfs: embed the xlog_op_header in the commit record
In reply to Dave ChinnerRemove the final case where xlog_write() has to prepend an opheader to a log transaction. Similar to the start record, the commit record is just an empty opheader with a XLOG_COMMIT_TRANS type, so we can just make this the payload for the region being passed to xlog_write() and remove the special handling in xlog_write() for the commit record.
--- fs/xfs/xfs_log.c | 33 +++++++++++++++------------------ 1 file changed, 15 insertions(+), 18 deletions(-)
fs/xfs/xfs_log.c +15 -18
@@ -1540,9 +1540,14 @@ xlog_commit_record(struct xlog_in_core **iclog, xfs_lsn_t *lsn) { + struct xlog_op_header ophdr = { + .oh_clientid =XFS_TRANSACTION , + .oh_tid =cpu_to_be32 (ticket->t_tid), + .oh_flags =XLOG_COMMIT_TRANS , + };struct xfs_log_iovec reg = { - .i_addr =NULL , - .i_len =0 , + .i_addr = &ophdr, + .i_len =sizeof (struct xlog_op_header ), .i_type =XLOG_REG_TYPE_COMMIT , }; struct xfs_log_vec vec = {
@@ -1554,6 +1559,8 @@ xlog_commit_record(if (XLOG_FORCED_SHUTDOWN (log))return -EIO ; +/* account for space used by record data */ + ticket->t_curr_res -= reg.i_len; error =xlog_write (log, &vec, ticket, lsn, iclog,XLOG_COMMIT_TRANS );if (error)xfs_force_shutdown (log->l_mp,SHUTDOWN_LOG_IO_ERROR );
@@ -2159,11 +2166,10 @@ xlog_write_calc_vec_length(/* Don't account for regions with embedded ophdrs */ if (optype && headers >0 ) { -if (optype &XLOG_UNMOUNT_TRANS ) - headers--; + headers--;if (optype &XLOG_START_TRANS ) { -ASSERT (headers >=2 ); - headers -=2 ; +ASSERT (headers >=1 ); + headers--; } }
@@ -2373,14 +2379,6 @@ xlog_write(int data_cnt =0 ;int error =0 ; -/* -* If this is a commit or unmount transaction, we don't need a start -* record to be written. We do, however, have to account for the commit -* header that gets written. Hence we always have to account for an -* extra xlog_op_header here for commit records. -*/ -if (optype &XLOG_COMMIT_TRANS ) - ticket->t_curr_res -=sizeof (struct xlog_op_header );if (ticket->t_curr_res <0 ) {xfs_alert_tag (log->l_mp,XFS_PTAG_LOGRES ,"ctx ticket reservation ran out. Need to up reservation" );
@@ -2433,14 +2431,13 @@ xlog_write(/* * The XLOG_START_TRANS has embedded ophdrs for the * start record and transaction header. They will always -* be the first two regions in the lv chain. +* be the first two regions in the lv chain. Commit and +* unmount records also have embedded ophdrs. */ -if (optype &XLOG_START_TRANS ) { +if (optype) { ophdr = reg->i_addr;if (index) optype &= ~XLOG_START_TRANS ; - }else if (optype &XLOG_UNMOUNT_TRANS ) { - ophdr = reg->i_addr; }else { ophdr =xlog_write_setup_ophdr (log, ptr, ticket, optype);
Signature · 1 line
2.31.1
PATCH v5 23/39 xfs: xlog_write() no longer needs contwr state
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
The rework of xlog_write() no longer requires xlog_get_iclog_state() to tell it about internal iclog space reservation state to direct it on what to do. Remove this parameter.
$ size fs/xfs/xfs_log.o.* text data bss dec hex filename 26520 560 8 27088 69d0 fs/xfs/xfs_log.o.orig 26384 560 8 26952 6948 fs/xfs/xfs_log.o.patched
--- fs/xfs/xfs_log.c | 29 ++++++++++------------------- 1 file changed, 10 insertions(+), 19 deletions(-)
fs/xfs/xfs_log.c +10 -19
@@ -47,7 +47,6 @@ xlog_state_get_iclog_space(int len, struct xlog_in_core **iclog, struct xlog_ticket *ticket, - int *continued_write, int *logoffsetp); STATIC void xlog_grant_push_ail(
@@ -2178,8 +2177,7 @@ xlog_write_get_more_iclog_space(uint32_t *log_offset, uint32_t len, uint32_t *record_cnt, - uint32_t *data_cnt, - int *contwr) + uint32_t *data_cnt) { struct xlog_in_core *iclog = *iclogp;int error;
@@ -2193,8 +2191,8 @@ xlog_write_get_more_iclog_space(if (error)return error; - error =xlog_state_get_iclog_space (log, len, &iclog, - ticket, contwr, log_offset); + error =xlog_state_get_iclog_space (log, len, &iclog, ticket, + log_offset);if (error)return error; *record_cnt =0 ;
@@ -2218,8 +2216,7 @@ xlog_write_partial(uint32_t *log_offset, uint32_t *len, uint32_t *record_cnt, - uint32_t *data_cnt, - int *contwr) + uint32_t *data_cnt) { struct xlog_in_core *iclog = *iclogp;struct xfs_log_vec *lv = log_vector;
@@ -2253,7 +2250,7 @@ xlog_write_partial( sizeof(struct xlog_op_header)) { error =xlog_write_get_more_iclog_space (log, ticket, &iclog, log_offset, *len, record_cnt, - data_cnt, contwr); + data_cnt);if (error)return ERR_PTR (error); ptr = iclog->ic_datap + *log_offset;
@@ -2309,7 +2306,7 @@ xlog_write_partial( error =xlog_write_get_more_iclog_space (log, ticket, &iclog, log_offset, *len, record_cnt, - data_cnt, contwr); + data_cnt);if (error)return ERR_PTR (error); ptr = iclog->ic_datap + *log_offset;
@@ -2407,7 +2404,6 @@ xlog_write( {struct xlog_in_core *iclog =NULL ;struct xfs_log_vec *lv = log_vector; -int contwr =0 ;int record_cnt =0 ;int data_cnt =0 ;int error =0 ;
@@ -2421,7 +2417,7 @@ xlog_write( } error =xlog_state_get_iclog_space (log, len, &iclog, ticket, - &contwr, &log_offset); + &log_offset);if (error)return error;
@@ -2437,7 +2433,7 @@ xlog_write(ASSERT (!(optype & (XLOG_COMMIT_TRANS |XLOG_UNMOUNT_TRANS ))); lv =xlog_write_partial (log, lv, ticket, &iclog, &log_offset, - &len, &record_cnt, &data_cnt, &contwr); + &len, &record_cnt, &data_cnt);if (IS_ERR_OR_NULL (lv)) { error =PTR_ERR_OR_ZERO (lv);break ;
@@ -2451,7 +2447,6 @@ xlog_write(* those writes accounted to it. Hence we do not need to update the * iclog with the number of bytes written here. */ -ASSERT (!contwr ||XLOG_FORCED_SHUTDOWN (log));spin_lock (&log->l_icloglock);xlog_state_finish_copy (log, iclog, record_cnt,0 );if (commit_iclog) {
@@ -2855,7 +2850,6 @@ xlog_state_get_iclog_space(int len, struct xlog_in_core **iclogp, struct xlog_ticket *ticket, - int *continued_write, int *logoffsetp) { int log_offset;
@@ -2931,13 +2925,10 @@ xlog_state_get_iclog_space(* iclogs (to mark it taken), this particular iclog will release/sync * to disk in xlog_write(). */ -if (len <= iclog->ic_size - iclog->ic_offset) { - *continued_write =0 ; +if (len <= iclog->ic_size - iclog->ic_offset) iclog->ic_offset += len; - }else { - *continued_write =1 ; +else xlog_state_switch_iclogs (log, iclog, iclog->ic_size); - } *iclogp = iclog;ASSERT (iclog->ic_offset <= iclog->ic_size);
Signature · 1 line
2.31.1
PATCH v5 2/39 xfs: separate CIL commit record IO
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
To allow for iclog IO device cache flush behaviour to be optimised, we first need to separate out the commit record iclog IO from the rest of the checkpoint so we can wait for the checkpoint IO to complete before we issue the commit record.
This separation is only necessary if the commit record is being written into a different iclog to the start of the checkpoint as the upcoming cache flushing changes requires completion ordering against the other iclogs submitted by the checkpoint.
If the entire checkpoint and commit is in the one iclog, then they are both covered by the one set of cache flush primitives on the iclog and hence there is no need to separate them for ordering.
Otherwise, we need to wait for all the previous iclogs to complete so they are ordered correctly and made stable by the REQ_PREFLUSH that the commit record iclog IO issues. This guarantees that if a reader sees the commit record in the journal, they will also see the entire checkpoint that commit record closes off.
This also provides the guarantee that when the commit record IO completes, we can safely unpin all the log items in the checkpoint so they can be written back because the entire checkpoint is stable in the journal.
--- fs/xfs/xfs_log.c | 8 +++++--- fs/xfs/xfs_log_cil.c | 9 +++++++++ fs/xfs/xfs_log_priv.h | 2 ++ 3 files changed, 16 insertions(+), 3 deletions(-)
fs/xfs/xfs_log.c +5 -3
@@ -786,10 +786,12 @@ xfs_log_mount_cancel( }/* -* Wait for the iclog to be written disk, or return an error if the log has been -* shut down. +* Wait for the iclog and all prior iclogs to be written disk as required by the +* log force state machine. Waiting on ic_force_wait ensures iclog completions +* have been ordered and callbacks run before we are woken here, hence +* guaranteeing that all the iclogs up to this one are on stable storage. */ -static int +int xlog_wait_on_iclog( struct xlog_in_core *iclog) __releases(iclog->ic_log->l_icloglock)
fs/xfs/xfs_log_cil.c +9 -0
@@ -870,6 +870,15 @@ xlog_cil_push_work(wake_up_all (&cil->xc_commit_wait);spin_unlock (&cil->xc_push_lock); +/* +* If the checkpoint spans multiple iclogs, wait for all previous +* iclogs to complete before we submit the commit_iclog. +*/ +if (ctx->start_lsn != commit_lsn) { +spin_lock (&log->l_icloglock); +xlog_wait_on_iclog (commit_iclog->ic_prev); + } +/* release the hounds! */ xfs_log_release_iclog (commit_iclog);return ;
fs/xfs/xfs_log_priv.h +2 -0
@@ -584,6 +584,8 @@ xlog_wait(remove_wait_queue (wq, &wait); } +int xlog_wait_on_iclog (struct xlog_in_core *iclog); +/* * The LSN is valid so long as it is behind the current LSN. If it isn't, this * means that the next log record that includes this metadata could have a
Signature · 1 line
2.31.1
PATCH v5 7/39 xfs: journal IO cache flush reductions
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Currently every journal IO is issued as REQ_PREFLUSH | REQ_FUA to guarantee the ordering requirements the journal has w.r.t. metadata writeback. THe two ordering constraints are:
1. we cannot overwrite metadata in the journal until we guarantee that the dirty metadata has been written back in place and is stable.
2. we cannot write back dirty metadata until it has been written to the journal and guaranteed to be stable (and hence recoverable) in the journal.
The ordering guarantees of #1 are provided by REQ_PREFLUSH. This causes the journal IO to issue a cache flush and wait for it to complete before issuing the write IO to the journal. Hence all completed metadata IO is guaranteed to be stable before the journal overwrites the old metadata.
The ordering guarantees of #2 are provided by the REQ_FUA, which ensures the journal writes do not complete until they are on stable storage. Hence by the time the last journal IO in a checkpoint completes, we know that the entire checkpoint is on stable storage and we can unpin the dirty metadata and allow it to be written back.
This is the mechanism by which ordering was first implemented in XFS way back in 2002 by commit 95d97c36e5155075ba2eb22b17562cfcc53fcf96 ("Add support for drive write cache flushing") in the xfs-archive tree.
A lot has changed since then, most notably we now use delayed logging to checkpoint the filesystem to the journal rather than write each individual transaction to the journal. Cache flushes on journal IO are necessary when individual transactions are wholly contained within a single iclog. However, CIL checkpoints are single transactions that typically span hundreds to thousands of individual journal writes, and so the requirements for device cache flushing have changed.
That is, the ordering rules I state above apply to ordering of atomic transactions recorded in the journal, not to the journal IO itself. Hence we need to ensure metadata is stable before we start writing a new transaction to the journal (guarantee #1), and we need to ensure the entire transaction is stable in the journal before we start metadata writeback (guarantee #2).
Hence we only need a REQ_PREFLUSH on the journal IO that starts a new journal transaction to provide #1, and it is not on any other journal IO done within the context of that journal transaction.
The CIL checkpoint already issues a cache flush before it starts writing to the log, so we no longer need the iclog IO to issue a REQ_REFLUSH for us. Hence if XLOG_START_TRANS is passed to xlog_write(), we no longer need to mark the first iclog in the log write with REQ_PREFLUSH for this case. As an added bonus, this ordering mechanism works for both internal and external logs, meaning we can remove the explicit data device cache flushes from the iclog write code when using external logs.
Given the new ordering semantics of commit records for the CIL, we need iclogs containing commit records to issue a REQ_PREFLUSH. We also require unmount records to do this. Hence for both XLOG_COMMIT_TRANS and XLOG_UNMOUNT_TRANS xlog_write() calls we need to mark the first iclog being written with REQ_PREFLUSH.
For both commit records and unmount records, we also want them immediately on stable storage, so we want to also mark the iclogs that contain these records to be marked REQ_FUA. That means if a record is split across multiple iclogs, they are all marked REQ_FUA and not just the last one so that when the transaction is completed all the parts of the record are on stable storage.
And for external logs, unmount records need a pre-write data device cache flush similar to the CIL checkpoint cache pre-flush as the internal iclog write code does not do this implicitly anymore.
As an optimisation, when the commit record lands in the same iclog as the journal transaction starts, we don't need to wait for anything and can simply use REQ_FUA to provide guarantee #2. This means that for fsync() heavy workloads, the cache flush behaviour is completely unchanged and there is no degradation in performance as a result of optimise the multi-IO transaction case.
The most notable sign that there is less IO latency on my test machine (nvme SSDs) is that the "noiclogs" rate has dropped substantially. This metric indicates that the CIL push is blocking in xlog_get_iclog_space() waiting for iclog IO completion to occur. With 8 iclogs of 256kB, the rate is appoximately 1 noiclog event to every 4 iclog writes. IOWs, every 4th call to xlog_get_iclog_space() is blocking waiting for log IO. With the changes in this patch, this drops to 1 noiclog event for every 100 iclog writes. Hence it is clear that log IO is completing much faster than it was previously, but it is also clear that for large iclog sizes, this isn't the performance limiting factor on this hardware.
With smaller iclogs (32kB), however, there is a substantial difference. With the cache flush modifications, the journal is now running at over 4000 write IOPS, and the journal throughput is largely identical to the 256kB iclogs and the noiclog event rate stays low at about 1:50 iclog writes. The existing code tops out at about 2500 IOPS as the number of cache flushes dominate performance and latency. The noiclog event rate is about 1:4, and the performance variance is quite large as the journal throughput can fall to less than half the peak sustained rate when the cache flush rate prevents metadata writeback from keeping up and the log runs out of space and throttles reservations.
As a result:
logbsize fsmark create rate rm -rf
before 32kb 152851+/-5.3e+04 5m28s
patched 32kb 221533+/-1.1e+04 5m24s
before 256kb 220239+/-6.2e+03 4m58s
patched 256kb 228286+/-9.2e+03 5m06s
The rm -rf times are included because I ran them, but the differences are largely noise. This workload is largely metadata read IO latency bound and the changes to the journal cache flushing doesn't really make any noticable difference to behaviour apart from a reduction in noiclog events from background CIL pushing.
--- fs/xfs/xfs_log.c | 66 +++++++++++++++---------------------------- fs/xfs/xfs_log.h | 1 - fs/xfs/xfs_log_cil.c | 18 +++++++++--- fs/xfs/xfs_log_priv.h | 6 ++++ 4 files changed, 43 insertions(+), 48 deletions(-)
fs/xfs/xfs_log.c +23 -43
@@ -513,7 +513,7 @@ __xlog_state_release_iclog(* Flush iclog to disk if this is the last reference to the given iclog and the * it is in the WANT_SYNC state. */ -static int +int xlog_state_release_iclog (struct xlog *log,struct xlog_in_core *iclog)
@@ -533,23 +533,6 @@ xlog_state_release_iclog(return 0 ; } -void -xfs_log_release_iclog ( -struct xlog_in_core *iclog) -{ -struct xlog *log = iclog->ic_log; -bool sync = false; - -if (atomic_dec_and_lock (&iclog->ic_refcnt, &log->l_icloglock)) { -if (iclog->ic_state !=XLOG_STATE_IOERROR ) - sync =__xlog_state_release_iclog (log, iclog); -spin_unlock (&log->l_icloglock); - } - -if (sync) -xlog_sync (log, iclog); -} -/* * Mount a log filesystem *
@@ -837,6 +820,14 @@ xlog_write_unmount_record(/* account for space used by record data */ ticket->t_curr_res -=sizeof (ulf); + +/* +* For external log devices, we need to flush the data device cache +* first to ensure all metadata writeback is on stable storage before we +* stamp the tail LSN into the unmount record. +*/ +if (log->l_targ != log->l_mp->m_ddev_targp) +blkdev_issue_flush (log->l_targ->bt_bdev);return xlog_write (log, &vec, ticket,NULL ,NULL ,XLOG_UNMOUNT_TRANS ); }
@@ -874,6 +865,11 @@ xlog_unmount_write(else ASSERT (iclog->ic_state ==XLOG_STATE_WANT_SYNC || iclog->ic_state ==XLOG_STATE_IOERROR ); +/* +* Ensure the journal is fully flushed and on stable storage once the +* iclog containing the unmount record is written. +*/ + iclog->ic_flags |= (XLOG_ICL_NEED_FLUSH |XLOG_ICL_NEED_FUA ); error =xlog_state_release_iclog (log, iclog);xlog_wait_on_iclog (iclog);
@@ -1755,8 +1751,7 @@ xlog_write_iclog(struct xlog *log, struct xlog_in_core *iclog, uint64_t bno, - unsigned int count, - bool need_flush) + unsigned int count) { ASSERT(bno < log->l_logBBsize);
@@ -1794,10 +1789,12 @@ xlog_write_iclog(* writeback throttle from throttling log writes behind background * metadata writeback and causing priority inversions. */ - iclog->ic_bio.bi_opf =REQ_OP_WRITE |REQ_META |REQ_SYNC | -REQ_IDLE |REQ_FUA ; -if (need_flush) + iclog->ic_bio.bi_opf =REQ_OP_WRITE |REQ_META |REQ_SYNC |REQ_IDLE ; +if (iclog->ic_flags &XLOG_ICL_NEED_FLUSH ) iclog->ic_bio.bi_opf |=REQ_PREFLUSH ; +if (iclog->ic_flags &XLOG_ICL_NEED_FUA ) + iclog->ic_bio.bi_opf |=REQ_FUA ; + iclog->ic_flags &= ~(XLOG_ICL_NEED_FLUSH |XLOG_ICL_NEED_FUA );if (xlog_map_iclog_data (&iclog->ic_bio, iclog->ic_data, count)) {xfs_force_shutdown (log->l_mp,SHUTDOWN_LOG_IO_ERROR );
@@ -1900,7 +1897,6 @@ xlog_sync(unsigned int roundoff;/* roundoff to BB or stripe */ uint64_t bno;unsigned int size; -bool need_flush = true, split = false;ASSERT (atomic_read (&iclog->ic_refcnt) ==0 );
@@ -1925,10 +1921,8 @@ xlog_sync( bno =BLOCK_LSN (be64_to_cpu (iclog->ic_header.h_lsn));/* Do we need to split this write into 2 parts? */ -if (bno +BTOBB (count) > log->l_logBBsize) { +if (bno +BTOBB (count) > log->l_logBBsize)xlog_split_iclog (log, &iclog->ic_header, bno, count); - split = true; - }/* calculcate the checksum */ iclog->ic_header.h_crc = xlog_cksum(log, &iclog->ic_header,
@@ -1949,22 +1943,8 @@ xlog_sync( be64_to_cpu(iclog->ic_header.h_lsn)); }#endif - -/* -* Flush the data device before flushing the log to make sure all meta -* data written back from the AIL actually made it to disk before -* stamping the new log tail LSN into the log buffer. For an external -* log we need to issue the flush explicitly, and unfortunately -* synchronously here; for an internal log we can simply use the block -* layer state machine for preflushes. -*/ -if (log->l_targ != log->l_mp->m_ddev_targp || split) { -blkdev_issue_flush (log->l_mp->m_ddev_targp->bt_bdev); - need_flush = false; - } -xlog_verify_iclog (log, iclog, count); -xlog_write_iclog (log, iclog, bno, count, need_flush); +xlog_write_iclog (log, iclog, bno, count); }/*
@@ -2418,7 +2398,7 @@ xlog_write(ASSERT (log_offset <= iclog->ic_size -1 ); ptr = iclog->ic_datap + log_offset; -/* start_lsn is the first lsn written to. That's all we need. */ +/* Start_lsn is the first lsn written to. */ if (start_lsn && !*start_lsn) *start_lsn =be64_to_cpu (iclog->ic_header.h_lsn);
fs/xfs/xfs_log.h +0 -1
@@ -117,7 +117,6 @@ void xfs_log_mount_cancel(struct xfs_mount *);xfs_lsn_t xlog_assign_tail_lsn (struct xfs_mount *mp);xfs_lsn_t xlog_assign_tail_lsn_locked (struct xfs_mount *mp);void xfs_log_space_wake (struct xfs_mount *mp); -void xfs_log_release_iclog (struct xlog_in_core *iclog); int xfs_log_reserve(struct xfs_mount *mp, int length, int count,
fs/xfs/xfs_log_cil.c +14 -4
@@ -890,15 +890,25 @@ xlog_cil_push_work(/* * If the checkpoint spans multiple iclogs, wait for all previous -* iclogs to complete before we submit the commit_iclog. +* iclogs to complete before we submit the commit_iclog. In this case, +* the commit_iclog write needs to issue a pre-flush so that the +* ordering is correctly preserved down to stable storage. */ +spin_lock (&log->l_icloglock);if (ctx->start_lsn != commit_lsn) { -spin_lock (&log->l_icloglock);xlog_wait_on_iclog (commit_iclog->ic_prev); +spin_lock (&log->l_icloglock); + commit_iclog->ic_flags |=XLOG_ICL_NEED_FLUSH ; } -/* release the hounds! */ -xfs_log_release_iclog (commit_iclog); +/* +* The commit iclog must be written to stable storage to guarantee +* journal IO vs metadata writeback IO is correctly ordered on stable +* storage. +*/ + commit_iclog->ic_flags |=XLOG_ICL_NEED_FUA ; +xlog_state_release_iclog (log, commit_iclog); +spin_unlock (&log->l_icloglock);return ; out_skip:
fs/xfs/xfs_log_priv.h +6 -0
@@ -133,6 +133,9 @@ enum xlog_iclog_state {#define XLOG_COVER_OPS 5 +#define XLOG_ICL_NEED_FLUSH (1 << 0)/* iclog needs REQ_PREFLUSH */ +#define XLOG_ICL_NEED_FUA (1 << 1)/* iclog needs REQ_FUA */ +/* Ticket reservation region accounting */ #define XLOG_TIC_LEN_MAX 15
@@ -201,6 +204,7 @@ typedef struct xlog_in_core {u32 ic_size;u32 ic_offset;enum xlog_iclog_state ic_state; +unsigned int ic_flags;char *ic_datap;/* pointer to iclog data */ /* Callback structures need their own cacheline */
@@ -486,6 +490,8 @@ int xlog_commit_record(struct xlog *log, struct xlog_ticket *ticket,void xfs_log_ticket_ungrant (struct xlog *log,struct xlog_ticket *ticket);void xfs_log_ticket_regrant (struct xlog *log,struct xlog_ticket *ticket); +int xlog_state_release_iclog (struct xlog *log,struct xlog_in_core *iclog); +/* * When we crack an atomic LSN, we sample it first so that the value will not * change while we are cracking it into the component values. This means we
Signature · 1 line
2.31.1
PATCH v5 19/39 xfs: log ticket region debug is largely useless
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
xlog_tic_add_region() is used to trace the regions being added to a log ticket to provide information in the situation where a ticket reservation overrun occurs. The information gathered is stored int the ticket, and dumped if xlog_print_tic_res() is called.
For a front end struct xfs_trans overrun, the ticket only contains reservation tracking information - the ticket is never handed to the log so has no regions attached to it. The overrun debug information in this case comes from xlog_print_trans(), which walks the items attached to the transaction and dumps their attached formatted log vectors directly. It also dumps the ticket state, but that only contains reservation accounting and nothing else. Hence xlog_print_tic_res() never dumps region or overrun information from this path.
xlog_tic_add_region() is actually called from xlog_write(), which means it is being used to track the regions seen in a CIL checkpoint log vector chain. In looking at CIL behaviour recently, I've seen 32MB checkpoints regularly exceed 250,000 regions in the LV chain. The log ticket debug code can track *15* regions. IOWs, if there is a ticket overrun in the CIL code, the ticket region tracking code is going to be completely useless for determining what went wrong. The only thing it can tell us is how much of an overrun occurred, and we really don't need extra debug information in the log ticket to tell us that.
Indeed, the main place we call xlog_tic_add_region() is also adding up the number of regions and the space used so that xlog_write() knows how much will be written to the log. This is exactly the same information that log ticket is storing once we take away the useless region tracking array. Hence xlog_tic_add_region() is not useful, but can be called 250,000 times a CIL push...
Just strip all that debug "information" out of the of the log ticket and only have it report reservation space information when an overrun occurs. This also reduces the size of a log ticket down by about 150 bytes...
--- fs/xfs/xfs_log.c | 107 +++--------------------------------------- fs/xfs/xfs_log_priv.h | 20 -------- 2 files changed, 6 insertions(+), 121 deletions(-)
fs/xfs/xfs_log.c +6 -101
@@ -377,30 +377,6 @@ xlog_grant_head_check(return error; } -static void -xlog_tic_reset_res (xlog_ticket_t *tic) -{ - tic->t_res_num =0 ; - tic->t_res_arr_sum =0 ; - tic->t_res_num_ophdrs =0 ; -} - -static void -xlog_tic_add_region (xlog_ticket_t *tic,uint len,uint type) -{ -if (tic->t_res_num ==XLOG_TIC_LEN_MAX ) { -/* add to overflow and start again */ - tic->t_res_o_flow += tic->t_res_arr_sum; - tic->t_res_num =0 ; - tic->t_res_arr_sum =0 ; - } - - tic->t_res_arr[tic->t_res_num].r_len = len; - tic->t_res_arr[tic->t_res_num].r_type = type; - tic->t_res_arr_sum += len; - tic->t_res_num++; -} -bool xfs_log_writable (struct xfs_mount *mp)
@@ -450,8 +426,6 @@ xfs_log_regrant(xlog_grant_push_ail (log, tic->t_unit_res); tic->t_curr_res = tic->t_unit_res; -xlog_tic_reset_res (tic); -if (tic->t_cnt >0 )return 0 ;
@@ -2077,63 +2051,11 @@ xlog_print_tic_res(struct xfs_mount *mp, struct xlog_ticket *ticket) { - uint i; -uint ophdr_spc = ticket->t_res_num_ophdrs * (uint )sizeof (xlog_op_header_t); - -/* match with XLOG_REG_TYPE_* in xfs_log.h */ -#define REG_TYPE_STR (type, str) [XLOG_REG_TYPE_##type] = str -static char *res_type_str[] = { -REG_TYPE_STR (BFORMAT ,"bformat" ), -REG_TYPE_STR (BCHUNK ,"bchunk" ), -REG_TYPE_STR (EFI_FORMAT ,"efi_format" ), -REG_TYPE_STR (EFD_FORMAT ,"efd_format" ), -REG_TYPE_STR (IFORMAT ,"iformat" ), -REG_TYPE_STR (ICORE ,"icore" ), -REG_TYPE_STR (IEXT ,"iext" ), -REG_TYPE_STR (IBROOT ,"ibroot" ), -REG_TYPE_STR (ILOCAL ,"ilocal" ), -REG_TYPE_STR (IATTR_EXT ,"iattr_ext" ), -REG_TYPE_STR (IATTR_BROOT ,"iattr_broot" ), -REG_TYPE_STR (IATTR_LOCAL ,"iattr_local" ), -REG_TYPE_STR (QFORMAT ,"qformat" ), -REG_TYPE_STR (DQUOT ,"dquot" ), -REG_TYPE_STR (QUOTAOFF ,"quotaoff" ), -REG_TYPE_STR (LRHEADER ,"LR header" ), -REG_TYPE_STR (UNMOUNT ,"unmount" ), -REG_TYPE_STR (COMMIT ,"commit" ), -REG_TYPE_STR (TRANSHDR ,"trans header" ), -REG_TYPE_STR (ICREATE ,"inode create" ), -REG_TYPE_STR (RUI_FORMAT ,"rui_format" ), -REG_TYPE_STR (RUD_FORMAT ,"rud_format" ), -REG_TYPE_STR (CUI_FORMAT ,"cui_format" ), -REG_TYPE_STR (CUD_FORMAT ,"cud_format" ), -REG_TYPE_STR (BUI_FORMAT ,"bui_format" ), -REG_TYPE_STR (BUD_FORMAT ,"bud_format" ), - }; -BUILD_BUG_ON (ARRAY_SIZE (res_type_str) !=XLOG_REG_TYPE_MAX +1 ); -#undef REG_TYPE_STR - xfs_warn(mp, "ticket reservation summary:"); -xfs_warn (mp," unit res = %d bytes" , - ticket->t_unit_res); -xfs_warn (mp," current res = %d bytes" , - ticket->t_curr_res); -xfs_warn (mp," total reg = %u bytes (o/flow = %u bytes)" , - ticket->t_res_arr_sum, ticket->t_res_o_flow); -xfs_warn (mp," ophdrs = %u (ophdr space = %u bytes)" , - ticket->t_res_num_ophdrs, ophdr_spc); -xfs_warn (mp," ophdr + reg = %u bytes" , - ticket->t_res_arr_sum + ticket->t_res_o_flow + ophdr_spc); -xfs_warn (mp," num regions = %u" , - ticket->t_res_num); - -for (i =0 ; i < ticket->t_res_num; i++) { -uint r_type = ticket->t_res_arr[i].r_type; -xfs_warn (mp,"region[%u]: %s - %u bytes" , i, - ((r_type <=0 || r_type >XLOG_REG_TYPE_MAX ) ? -"bad-rtype" : res_type_str[r_type]), - ticket->t_res_arr[i].r_len); - } +xfs_warn (mp," unit res = %d bytes" , ticket->t_unit_res); +xfs_warn (mp," current res = %d bytes" , ticket->t_curr_res); +xfs_warn (mp," original count = %d" , ticket->t_ocnt); +xfs_warn (mp," remaining count = %d" , ticket->t_cnt); }/*
@@ -2198,7 +2120,6 @@ xlog_write_calc_vec_length( uint optype) {struct xfs_log_vec *lv; -int headers =0 ;int len =0 ;int i;
@@ -2207,17 +2128,9 @@ xlog_write_calc_vec_length(if (lv->lv_buf_len ==XFS_LOG_VEC_ORDERED )continue ; - headers += lv->lv_niovecs; - -for (i =0 ; i < lv->lv_niovecs; i++) { -struct xfs_log_iovec *vecp = &lv->lv_iovecp[i]; - - len += vecp->i_len; -xlog_tic_add_region (ticket, vecp->i_len, vecp->i_type); - } +for (i =0 ; i < lv->lv_niovecs; i++) + len += lv->lv_iovecp[i].i_len; } - ticket->t_res_num_ophdrs += headers; -return len; }
@@ -2276,7 +2189,6 @@ xlog_write_setup_copy(/* account for new log op header */ ticket->t_curr_res -=sizeof (struct xlog_op_header ); - ticket->t_res_num_ophdrs++;return sizeof (struct xlog_op_header ); }
@@ -2973,9 +2885,6 @@ xlog_state_get_iclog_space(*/ if (log_offset ==0 ) { ticket->t_curr_res -= log->l_iclog_hsize; -xlog_tic_add_region (ticket, - log->l_iclog_hsize, -XLOG_REG_TYPE_LRHEADER ); head->h_cycle =cpu_to_be32 (log->l_curr_cycle); head->h_lsn =cpu_to_be64 (xlog_assign_lsn (log->l_curr_cycle, log->l_curr_block));
@@ -3055,7 +2964,6 @@ xfs_log_ticket_regrant(xlog_grant_sub_space (log, &log->l_write_head.grant, ticket->t_curr_res); ticket->t_curr_res = ticket->t_unit_res; -xlog_tic_reset_res (ticket);trace_xfs_log_ticket_regrant_sub (log, ticket);
@@ -3066,7 +2974,6 @@ xfs_log_ticket_regrant(trace_xfs_log_ticket_regrant_exit (log, ticket); ticket->t_curr_res = ticket->t_unit_res; -xlog_tic_reset_res (ticket); }xfs_log_ticket_put (ticket);
@@ -3529,8 +3436,6 @@ xlog_ticket_alloc(if (permanent) tic->t_flags |=XLOG_TIC_PERM_RESERV ; -xlog_tic_reset_res (tic); -return tic; }
fs/xfs/xfs_log_priv.h +0 -20
@@ -136,19 +136,6 @@ enum xlog_iclog_state {#define XLOG_ICL_NEED_FLUSH (1 << 0)/* iclog needs REQ_PREFLUSH */ #define XLOG_ICL_NEED_FUA (1 << 1)/* iclog needs REQ_FUA */ -/* Ticket reservation region accounting */ -#define XLOG_TIC_LEN_MAX 15 - -/* -* Reservation region -* As would be stored in xfs_log_iovec but without the i_addr which -* we don't care about. -*/ -typedef struct xlog_res { -uint r_len;/* region length :4 */ -uint r_type;/* region's transaction type :4 */ -}xlog_res_t ; - typedef struct xlog_ticket { struct list_head t_queue; /* reserve/write queue */ struct task_struct *t_task; /* task that owns this ticket */
@@ -159,13 +146,6 @@ typedef struct xlog_ticket {char t_ocnt;/* original count : 1 */ char t_cnt;/* current count : 1 */ char t_flags;/* properties of reservation : 1 */ - -/* reservation array fields */ -uint t_res_num;/* num in array : 4 */ -uint t_res_num_ophdrs;/* num op hdrs : 4 */ -uint t_res_arr_sum;/* array sum : 4 */ -uint t_res_o_flow;/* sum overflow : 4 */ -xlog_res_t t_res_arr[XLOG_TIC_LEN_MAX ];/* array of res : 8 * 15 */ } xlog_ticket_t;/*
Signature · 1 line
2.31.1
PATCH v5 8/39 xfs: Fix CIL throttle hang when CIL space used going backwards
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
A hang with tasks stuck on the CIL hard throttle was reported and largely diagnosed by Donald Buczek, who discovered that it was a result of the CIL context space usage decrementing in committed transactions once the hard throttle limit had been hit and processes were already blocked. This resulted in the CIL push not waking up those waiters because the CIL context was no longer over the hard throttle limit.
The surprising aspect of this was the CIL space usage going backwards regularly enough to trigger this situation. Assumptions had been made in design that the relogging process would only increase the size of the objects in the CIL, and so that space would only increase.
This change and commit message fixes the issue and documents the result of an audit of the triggers that can cause the CIL space to go backwards, how large the backwards steps tend to be, the frequency in which they occur, and what the impact on the CIL accounting code is.
Even though the CIL ctx->space_used can go backwards, it will only do so if the log item is already logged to the CIL and contains a space reservation for it's entire logged state. This is tracked by the shadow buffer state on the log item. If the item is not previously logged in the CIL it has no shadow buffer nor log vector, and hence the entire size of the logged item copied to the log vector is accounted to the CIL space usage. i.e. it will always go up in this case.
If the item has a log vector (i.e. already in the CIL) and the size decreases, then the existing log vector will be overwritten and the space usage will go down. This is the only condition where the space usage reduces, and it can only occur when an item is already tracked in the CIL. Hence we are safe from CIL space usage underruns as a result of log items decreasing in size when they are relogged.
Typically this reduction in CIL usage occurs from metadata blocks being free, such as when a btree block merge occurs or a directory enter/xattr entry is removed and the da-tree is reduced in size. This generally results in a reduction in size of around a single block in the CIL, but also tends to increase the number of log vectors because the parent and sibling nodes in the tree needs to be updated when a btree block is removed. If a multi-level merge occurs, then we see reduction in size of 2+ blocks, but again the log vector count goes up.
The other vector is inode fork size changes, which only log the current size of the fork and ignore the previously logged size when the fork is relogged. Hence if we are removing items from the inode fork (dir/xattr removal in shortform, extent record removal in extent form, etc) the relogged size of the inode for can decrease.
No other log items can decrease in size either because they are a fixed size (e.g. dquots) or they cannot be relogged (e.g. relogging an intent actually creates a new intent log item and doesn't relog the old item at all.) Hence the only two vectors for CIL context size reduction are relogging inode forks and marking buffers active in the CIL as stale.
Long story short: the majority of the code does the right thing and handles the reduction in log item size correctly, and only the CIL hard throttle implementation is problematic and needs fixing. This patch makes that fix, as well as adds comments in the log item code that result in items shrinking in size when they are relogged as a clear reminder that this can and does happen frequently.
The throttle fix is based upon the change Donald proposed, though it goes further to ensure that once the throttle is activated, it captures all tasks until the CIL push issues a wakeup, regardless of whether the CIL space used has gone back under the throttle threshold.
This ensures that we prevent tasks reducing the CIL slightly under the throttle threshold and then making more changes that push it well over the throttle limit. This is acheived by checking if the throttle wait queue is already active as a condition of throttling. Hence once we start throttling, we continue to apply the throttle until the CIL context push wakes everything on the wait queue.
We can use waitqueue_active() for the waitqueue manipulations and checks as they are all done under the ctx->xc_push_lock. Hence the waitqueue has external serialisation and we can safely peek inside the wait queue without holding the internal waitqueue locks.
Many thanks to Donald for his diagnostic and analysis work to isolate the cause of this hang.
--- fs/xfs/xfs_buf_item.c | 37 ++++++++++++++++++------------------- fs/xfs/xfs_inode_item.c | 14 ++++++++++++++ fs/xfs/xfs_log_cil.c | 22 +++++++++++++++++----- 3 files changed, 49 insertions(+), 24 deletions(-)
fs/xfs/xfs_buf_item.c +18 -19
@@ -74,14 +74,12 @@ xfs_buf_item_straddle( }/* -* This returns the number of log iovecs needed to log the -* given buf log item. +* Return the number of log iovecs and space needed to log the given buf log +* item segment. * -* It calculates this as 1 iovec for the buf log format structure -* and 1 for each stretch of non-contiguous chunks to be logged. -* Contiguous chunks are logged in a single iovec. -* -* If the XFS_BLI_STALE flag has been set, then log nothing. +* It calculates this as 1 iovec for the buf log format structure and 1 for each +* stretch of non-contiguous chunks to be logged. Contiguous chunks are logged +* in a single iovec. */ STATIC void xfs_buf_item_size_segment(
@@ -168,11 +166,8 @@ xfs_buf_item_size_segment( }/* -* This returns the number of log iovecs needed to log the given buf log item. -* -* It calculates this as 1 iovec for the buf log format structure and 1 for each -* stretch of non-contiguous chunks to be logged. Contiguous chunks are logged -* in a single iovec. +* Return the number of log iovecs and space needed to log the given buf log +* item. * * Discontiguous buffers need a format structure per region that is being * logged. This makes the changes in the buffer appear to log recovery as though
@@ -182,7 +177,11 @@ xfs_buf_item_size_segment(* what ends up on disk. * * If the XFS_BLI_STALE flag has been set, then log nothing but the buf log -* format structures. +* format structures. If the item has previously been logged and has dirty +* regions, we do not relog them in stale buffers. This has the effect of +* reducing the size of the relogged item by the amount of dirty data tracked +* by the log item. This can result in the committing transaction reducing the +* amount of space being consumed by the CIL. */ STATIC void xfs_buf_item_size(
@@ -199,9 +198,9 @@ xfs_buf_item_size(ASSERT (atomic_read (&bip->bli_refcount) >0 );if (bip->bli_flags &XFS_BLI_STALE ) {/* -* The buffer is stale, so all we need to log -* is the buf log format structure with the -* cancel flag in it. +* The buffer is stale, so all we need to log is the buf log +* format structure with the cancel flag in it as we are never +* going to replay the changes tracked in the log item. */ trace_xfs_buf_item_size_stale (bip);ASSERT (bip->__bli_format.blf_flags &XFS_BLF_CANCEL );
@@ -216,9 +215,9 @@ xfs_buf_item_size(if (bip->bli_flags &XFS_BLI_ORDERED ) {/* -* The buffer has been logged just to order it. -* It is not being included in the transaction -* commit, so no vectors are used at all. +* The buffer has been logged just to order it. It is not being +* included in the transaction commit, so no vectors are used at +* all. */ trace_xfs_buf_item_size_ordered (bip); *nvecs =XFS_LOG_VEC_ORDERED ;
fs/xfs/xfs_inode_item.c +14 -0
@@ -28,6 +28,20 @@ static inline struct xfs_inode_log_item *INODE_ITEM(struct xfs_log_item *lip) return container_of(lip, struct xfs_inode_log_item, ili_item); } +/* +* The logged size of an inode fork is always the current size of the inode +* fork. This means that when an inode fork is relogged, the size of the logged +* region is determined by the current state, not the combination of the +* previously logged state + the current state. This is different relogging +* behaviour to most other log items which will retain the size of the +* previously logged changes when smaller regions are relogged. +* +* Hence operations that remove data from the inode fork (e.g. shortform +* dir/attr remove, extent form extent removal, etc), the size of the relogged +* inode gets -smaller- rather than stays the same size as the previously logged +* size and this can result in the committing transaction reducing the amount of +* space being consumed by the CIL. +*/ STATIC void xfs_inode_item_data_fork_size( struct xfs_inode_log_item *iip,
fs/xfs/xfs_log_cil.c +17 -5
@@ -670,9 +670,14 @@ xlog_cil_push_work(ASSERT (push_seq <= ctx->sequence);/* -* Wake up any background push waiters now this context is being pushed. +* As we are about to switch to a new, empty CIL context, we no longer +* need to throttle tasks on CIL space overruns. Wake any waiters that +* the hard push throttle may have caught so they can start committing +* to the new context. The ctx->xc_push_lock provides the serialisation +* necessary for safely using the lockless waitqueue_active() check in +* this context. */ -if (ctx->space_used >=XLOG_CIL_BLOCKING_SPACE_LIMIT (log)) +if (waitqueue_active (&cil->xc_push_wait))wake_up_all (&cil->xc_push_wait);/*
@@ -944,7 +949,7 @@ xlog_cil_push_background(ASSERT (!list_empty (&cil->xc_cil));/* -* don't do a background push if we haven't used up all the +* Don't do a background push if we haven't used up all the * space available yet. */ if (cil->xc_ctx->space_used <XLOG_CIL_SPACE_LIMIT (log)) {
@@ -968,9 +973,16 @@ xlog_cil_push_background(/* * If we are well over the space limit, throttle the work that is being -* done until the push work on this context has begun. +* done until the push work on this context has begun. Enforce the hard +* throttle on all transaction commits once it has been activated, even +* if the committing transactions have resulted in the space usage +* dipping back down under the hard limit. +* +* The ctx->xc_push_lock provides the serialisation necessary for safely +* using the lockless waitqueue_active() check in this context. */ -if (cil->xc_ctx->space_used >=XLOG_CIL_BLOCKING_SPACE_LIMIT (log)) { +if (cil->xc_ctx->space_used >=XLOG_CIL_BLOCKING_SPACE_LIMIT (log) || +waitqueue_active (&cil->xc_push_wait)) {trace_xfs_log_cil_wait (log, cil->xc_ctx->ticket);ASSERT (cil->xc_ctx->space_used < log->l_logsize);xlog_wait (&cil->xc_push_wait, &cil->xc_push_lock);
Signature · 1 line
2.31.1
PATCH v5 9/39 xfs: xfs_log_force_lsn isn't passed a LSN
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
In doing an investigation into AIL push stalls, I was looking at the log force code to see if an async CIL push could be done instead. This lead me to xfs_log_force_lsn() and looking at how it works.
xfs_log_force_lsn() is only called from inode synchronisation contexts such as fsync(), and it takes the ip->i_itemp->ili_last_lsn value as the LSN to sync the log to. This gets passed to xlog_cil_force_lsn() via xfs_log_force_lsn() to flush the CIL to the journal, and then used by xfs_log_force_lsn() to flush the iclogs to the journal.
The problem is that ip->i_itemp->ili_last_lsn does not store a log sequence number. What it stores is passed to it from the ->iop_committing method, which is called by xfs_log_commit_cil(). The value this passes to the iop_committing method is the CIL context sequence number that the item was committed to.
As it turns out, xlog_cil_force_lsn() converts the sequence to an actual commit LSN for the related context and returns that to xfs_log_force_lsn(). xfs_log_force_lsn() overwrites it's "lsn" variable that contained a sequence with an actual LSN and then uses that to sync the iclogs.
This caused me some confusion for a while, even though I originally wrote all this code a decade ago. ->iop_committing is only used by a couple of log item types, and only inode items use the sequence number it is passed.
Let's clean up the API, CIL structures and inode log item to call it a sequence number, and make it clear that the high level code is using CIL sequence numbers and not on-disk LSNs for integrity synchronisation purposes.
--- fs/xfs/libxfs/xfs_types.h | 1 + fs/xfs/xfs_buf_item.c | 2 +- fs/xfs/xfs_dquot_item.c | 2 +- fs/xfs/xfs_file.c | 14 +++++++------- fs/xfs/xfs_inode.c | 10 +++++----- fs/xfs/xfs_inode_item.c | 4 ++-- fs/xfs/xfs_inode_item.h | 2 +- fs/xfs/xfs_log.c | 27 ++++++++++++++------------- fs/xfs/xfs_log.h | 4 +--- fs/xfs/xfs_log_cil.c | 30 +++++++++++------------------- fs/xfs/xfs_log_priv.h | 15 +++++++-------- fs/xfs/xfs_trans.c | 6 +++--- fs/xfs/xfs_trans.h | 4 ++-- 13 files changed, 56 insertions(+), 65 deletions(-)
fs/xfs/libxfs/xfs_types.h +1 -0
@@ -21,6 +21,7 @@ typedef int32_t xfs_suminfo_t; /* type of bitmap summary info */typedef uint32_t xfs_rtword_t ;/* word type for bitmap manipulations */ typedef int64_t xfs_lsn_t ;/* log sequence number */ +typedef int64_t xfs_csn_t ;/* CIL sequence number */ typedef uint32_t xfs_dablk_t ;/* dir/attr block number (in file) */ typedef uint32_t xfs_dahash_t ;/* dir/attr hash value */
fs/xfs/xfs_buf_item.c +1 -1
@@ -713,7 +713,7 @@ xfs_buf_item_release( STATIC voidxfs_buf_item_committing (struct xfs_log_item *lip, -xfs_lsn_t commit_lsn) +xfs_csn_t seq) {return xfs_buf_item_release (lip); }
fs/xfs/xfs_dquot_item.c +1 -1
@@ -188,7 +188,7 @@ xfs_qm_dquot_logitem_release( STATIC voidxfs_qm_dquot_logitem_committing (struct xfs_log_item *lip, -xfs_lsn_t commit_lsn) +xfs_csn_t seq) {return xfs_qm_dquot_logitem_release (lip); }
fs/xfs/xfs_file.c +7 -7
@@ -119,8 +119,8 @@ xfs_dir_fsync(return xfs_log_force_inode (ip); } -static xfs_lsn_t -xfs_fsync_lsn ( +static xfs_csn_t +xfs_fsync_seq (struct xfs_inode *ip,bool datasync) {
@@ -128,7 +128,7 @@ xfs_fsync_lsn(return 0 ;if (datasync && !(ip->i_itemp->ili_fsync_fields & ~XFS_ILOG_TIMESTAMP ))return 0 ; -return ip->i_itemp->ili_last_lsn; +return ip->i_itemp->ili_commit_seq; }/*
@@ -151,12 +151,12 @@ xfs_fsync_flush_log( int *log_flushed) {int error =0 ; -xfs_lsn_t lsn; +xfs_csn_t seq;xfs_ilock (ip,XFS_ILOCK_SHARED ); - lsn =xfs_fsync_lsn (ip, datasync); -if (lsn) { - error =xfs_log_force_lsn (ip->i_mount, lsn,XFS_LOG_SYNC , + seq =xfs_fsync_seq (ip, datasync); +if (seq) { + error =xfs_log_force_seq (ip->i_mount, seq,XFS_LOG_SYNC , log_flushed);spin_lock (&ip->i_itemp->ili_lock);
fs/xfs/xfs_inode.c +5 -5
@@ -2635,7 +2635,7 @@ xfs_iunpin(trace_xfs_inode_unpin_nowait (ip, _RET_IP_);/* Give the log a push to start the unpinning I/O */ -xfs_log_force_lsn (ip->i_mount, ip->i_itemp->ili_last_lsn,0 ,NULL ); +xfs_log_force_seq (ip->i_mount, ip->i_itemp->ili_commit_seq,0 ,NULL ); }
@@ -3644,16 +3644,16 @@ intxfs_log_force_inode ( struct xfs_inode *ip) { -xfs_lsn_t lsn =0 ; +xfs_csn_t seq =0 ;xfs_ilock (ip,XFS_ILOCK_SHARED );if (xfs_ipincount (ip)) - lsn = ip->i_itemp->ili_last_lsn; + seq = ip->i_itemp->ili_commit_seq;xfs_iunlock (ip,XFS_ILOCK_SHARED ); -if (!lsn) +if (!seq)return 0 ; -return xfs_log_force_lsn (ip->i_mount, lsn,XFS_LOG_SYNC ,NULL ); +return xfs_log_force_seq (ip->i_mount, seq,XFS_LOG_SYNC ,NULL ); }/*
fs/xfs/xfs_inode_item.c +2 -2
@@ -643,9 +643,9 @@ xfs_inode_item_committed( STATIC voidxfs_inode_item_committing (struct xfs_log_item *lip, -xfs_lsn_t commit_lsn) +xfs_csn_t seq) { -INODE_ITEM (lip)->ili_last_lsn = commit_lsn; +INODE_ITEM (lip)->ili_commit_seq = seq;return xfs_inode_item_release (lip); }
fs/xfs/xfs_inode_item.h +1 -1
@@ -33,7 +33,7 @@ struct xfs_inode_log_item {unsigned int ili_fields;/* fields to be logged */ unsigned int ili_fsync_fields;/* logged since last fsync */ xfs_lsn_t ili_flush_lsn;/* lsn at last flush */ -xfs_lsn_t ili_last_lsn;/* lsn at last transaction */ +xfs_csn_t ili_commit_seq;/* last transaction commit */ };static inline int xfs_inode_clean (struct xfs_inode *ip)
fs/xfs/xfs_log.c +14 -13
@@ -3252,14 +3252,13 @@ xfs_log_force( }static int -__xfs_log_force_lsn ( -struct xfs_mount *mp, +xlog_force_lsn ( +struct xlog *log,xfs_lsn_t lsn,uint flags,int *log_flushed,bool already_slept) { -struct xlog *log = mp->m_log;struct xlog_in_core *iclog;spin_lock (&log->l_icloglock);
@@ -3292,8 +3291,6 @@ __xfs_log_force_lsn(if (!already_slept && (iclog->ic_prev->ic_state ==XLOG_STATE_WANT_SYNC || iclog->ic_prev->ic_state ==XLOG_STATE_SYNCING )) { -XFS_STATS_INC (mp, xs_log_force_sleep); -xlog_wait (&iclog->ic_prev->ic_write_wait, &log->l_icloglock);return -EAGAIN ;
@@ -3331,25 +3328,29 @@ __xfs_log_force_lsn(* to disk, that thread will wake up all threads waiting on the queue. */ int -xfs_log_force_lsn ( +xfs_log_force_seq (struct xfs_mount *mp, -xfs_lsn_t lsn, +xfs_csn_t seq,uint flags,int *log_flushed) { +struct xlog *log = mp->m_log; +xfs_lsn_t lsn;int ret; -ASSERT (lsn !=0 ); +ASSERT (seq !=0 );XFS_STATS_INC (mp, xs_log_force); -trace_xfs_log_force (mp, lsn, _RET_IP_); +trace_xfs_log_force (mp, seq, _RET_IP_); - lsn =xlog_cil_force_lsn (mp->m_log, lsn); + lsn =xlog_cil_force_seq (log, seq);if (lsn ==NULLCOMMITLSN )return 0 ; - ret =__xfs_log_force_lsn (mp, lsn, flags, log_flushed, false); -if (ret == -EAGAIN ) - ret =__xfs_log_force_lsn (mp, lsn, flags, log_flushed, true); + ret =xlog_force_lsn (log, lsn, flags, log_flushed, false); +if (ret == -EAGAIN ) { +XFS_STATS_INC (mp, xs_log_force_sleep); + ret =xlog_force_lsn (log, lsn, flags, log_flushed, true); + }return ret; }
fs/xfs/xfs_log.h +1 -3
@@ -106,7 +106,7 @@ struct xfs_item_ops;struct xfs_trans ;int xfs_log_force (struct xfs_mount *mp,uint flags); -int xfs_log_force_lsn (struct xfs_mount *mp,xfs_lsn_t lsn,uint flags, +int xfs_log_force_seq (struct xfs_mount *mp,xfs_csn_t seq,uint flags,int *log_forced); int xfs_log_mount(struct xfs_mount *mp, struct xfs_buftarg *log_target,
@@ -131,8 +131,6 @@ bool xfs_log_writable(struct xfs_mount *mp);struct xlog_ticket *xfs_log_ticket_get (struct xlog_ticket *ticket);void xfs_log_ticket_put (struct xlog_ticket *ticket); -void xfs_log_commit_cil (struct xfs_mount *mp,struct xfs_trans *tp, -xfs_lsn_t *commit_lsn,bool regrant);void xlog_cil_process_committed (struct list_head *list);bool xfs_log_item_in_current_chkpt (struct xfs_log_item *lip);
fs/xfs/xfs_log_cil.c +11 -19
@@ -788,7 +788,7 @@ xlog_cil_push_work(* that higher sequences will wait for us to write out a commit record * before they do. * -* xfs_log_force_lsn requires us to mirror the new sequence into the cil +* xfs_log_force_seq requires us to mirror the new sequence into the cil * structure atomically with the addition of this sequence to the * committing list. This also ensures that we can do unlocked checks * against the current sequence in log forces without risking
@@ -1057,16 +1057,14 @@ xlog_cil_empty(* allowed again. */ void -xfs_log_commit_cil ( -struct xfs_mount *mp, +xlog_cil_commit ( +struct xlog *log,struct xfs_trans *tp, -xfs_lsn_t *commit_lsn, +xfs_csn_t *commit_seq,bool regrant) { -struct xlog *log = mp->m_log;struct xfs_cil *cil = log->l_cilp;struct xfs_log_item *lip, *next; -xfs_lsn_t xc_commit_lsn;/* * Do all necessary memory allocation before we lock the CIL.
@@ -1080,10 +1078,6 @@ xfs_log_commit_cil(xlog_cil_insert_items (log, tp); - xc_commit_lsn = cil->xc_ctx->sequence; -if (commit_lsn) - *commit_lsn = xc_commit_lsn; -if (regrant && !XLOG_FORCED_SHUTDOWN (log))xfs_log_ticket_regrant (log, tp->t_ticket);else
@@ -1106,8 +1100,10 @@ xfs_log_commit_cil(list_for_each_entry_safe (lip, next, &tp->t_items, li_trans) {xfs_trans_del_item (lip);if (lip->li_ops->iop_committing) - lip->li_ops->iop_committing (lip, xc_commit_lsn); + lip->li_ops->iop_committing (lip, cil->xc_ctx->sequence); } +if (commit_seq) + *commit_seq = cil->xc_ctx->sequence;/* xlog_cil_push_background() releases cil->xc_ctx_lock */ xlog_cil_push_background (log);
@@ -1124,9 +1120,9 @@ xfs_log_commit_cil(* iclog flush is necessary following this call. */ xfs_lsn_t -xlog_cil_force_lsn ( +xlog_cil_force_seq (struct xlog *log, -xfs_lsn_t sequence) +xfs_csn_t sequence) {struct xfs_cil *cil = log->l_cilp;struct xfs_cil_ctx *ctx;
@@ -1222,21 +1218,17 @@ boolxfs_log_item_in_current_chkpt ( struct xfs_log_item *lip) { -struct xfs_cil_ctx *ctx; +struct xfs_cil_ctx *ctx = lip->li_mountp->m_log->l_cilp->xc_ctx;if (list_empty (&lip->li_cil))return false; - ctx = lip->li_mountp->m_log->l_cilp->xc_ctx; -/* * li_seq is written on the first commit of a log item to record the * first checkpoint it is written to. Hence if it is different to the * current sequence, we're in a new checkpoint. */ -if (XFS_LSN_CMP (lip->li_seq, ctx->sequence) !=0 ) -return false; -return true; +return lip->li_seq == ctx->sequence; }/*
fs/xfs/xfs_log_priv.h +7 -8
@@ -234,7 +234,7 @@ struct xfs_cil;struct xfs_cil_ctx {struct xfs_cil *cil; -xfs_lsn_t sequence;/* chkpt sequence # */ +xfs_csn_t sequence;/* chkpt sequence # */ xfs_lsn_t start_lsn;/* first LSN of chkpt commit */ xfs_lsn_t commit_lsn;/* chkpt commit record lsn */ struct xlog_ticket *ticket;/* chkpt ticket */
@@ -272,10 +272,10 @@ struct xfs_cil {struct xfs_cil_ctx *xc_ctx;spinlock_t xc_push_lock____cacheline_aligned_in_smp ; -xfs_lsn_t xc_push_seq; +xfs_csn_t xc_push_seq;struct list_head xc_committing;wait_queue_head_t xc_commit_wait; -xfs_lsn_t xc_current_sequence; +xfs_csn_t xc_current_sequence;struct work_struct xc_push_work;wait_queue_head_t xc_push_wait;/* background push throttle */ }____cacheline_aligned_in_smp ;
@@ -554,19 +554,18 @@ int xlog_cil_init(struct xlog *log);void xlog_cil_init_post_recovery (struct xlog *log);void xlog_cil_destroy (struct xlog *log);bool xlog_cil_empty (struct xlog *log); +void xlog_cil_commit (struct xlog *log,struct xfs_trans *tp, +xfs_csn_t *commit_seq,bool regrant);/* * CIL force routines */ -xfs_lsn_t -xlog_cil_force_lsn ( -struct xlog *log, -xfs_lsn_t sequence); +xfs_lsn_t xlog_cil_force_seq (struct xlog *log,xfs_csn_t sequence);static inline void xlog_cil_force (struct xlog *log) { -xlog_cil_force_lsn (log, log->l_cilp->xc_current_sequence); +xlog_cil_force_seq (log, log->l_cilp->xc_current_sequence); }/*
fs/xfs/xfs_trans.c +3 -3
@@ -839,7 +839,7 @@ __xfs_trans_commit( bool regrant) {struct xfs_mount *mp = tp->t_mountp; -xfs_lsn_t commit_lsn =-1 ; +xfs_csn_t commit_seq =0 ;int error =0 ;int sync = tp->t_flags &XFS_TRANS_SYNC ;
@@ -881,7 +881,7 @@ __xfs_trans_commit(xfs_trans_apply_sb_deltas (tp);xfs_trans_apply_dquot_deltas (tp); -xfs_log_commit_cil (mp, tp, &commit_lsn, regrant); +xlog_cil_commit (mp->m_log, tp, &commit_seq, regrant);xfs_trans_free (tp);
@@ -890,7 +890,7 @@ __xfs_trans_commit(* log out now and wait for it. */ if (sync) { - error =xfs_log_force_lsn (mp, commit_lsn,XFS_LOG_SYNC ,NULL ); + error =xfs_log_force_seq (mp, commit_seq,XFS_LOG_SYNC ,NULL );XFS_STATS_INC (mp, xs_trans_sync); }else {XFS_STATS_INC (mp, xs_trans_async);
fs/xfs/xfs_trans.h +2 -2
@@ -43,7 +43,7 @@ struct xfs_log_item {struct list_head li_cil;/* CIL pointers */ struct xfs_log_vec *li_lv;/* active log vector */ struct xfs_log_vec *li_lv_shadow;/* standby vector */ -xfs_lsn_t li_seq;/* CIL commit seq */ +xfs_csn_t li_seq;/* CIL commit seq */ };/*
@@ -69,7 +69,7 @@ struct xfs_item_ops {void (*iop_pin)(struct xfs_log_item *);void (*iop_unpin)(struct xfs_log_item *,int remove);uint (*iop_push)(struct xfs_log_item *,struct list_head *); -void (*iop_committing)(struct xfs_log_item *,xfs_lsn_t commit_lsn); +void (*iop_committing)(struct xfs_log_item *lip,xfs_csn_t seq);void (*iop_release)(struct xfs_log_item *);xfs_lsn_t (*iop_committed)(struct xfs_log_item *,xfs_lsn_t ); int (*iop_recover)(struct xfs_log_item *lip,
Signature · 1 line
2.31.1
PATCH v5 11/39 xfs: CIL work is serialised, not pipelined
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Because we use a single work structure attached to the CIL rather than the CIL context, we can only queue a single work item at a time. This results in the CIL being single threaded and limits performance when it becomes CPU bound.
The design of the CIL is that it is pipelined and multiple commits can be running concurrently, but the way the work is currently implemented means that it is not pipelining as it was intended. The critical work to switch the CIL context can take a few milliseconds to run, but the rest of the CIL context flush can take hundreds of milliseconds to complete. The context switching is the serialisation point of the CIL, once the context has been switched the rest of the context push can run asynchrnously with all other context pushes.
Hence we can move the work to the CIL context so that we can run multiple CIL pushes at the same time and spread the majority of the work out over multiple CPUs. We can keep the per-cpu CIL commit state on the CIL rather than the context, because the context is pinned to the CIL until the switch is done and we aggregate and drain the per-cpu state held on the CIL during the context switch.
However, because we no longer serialise the CIL work, we can have effectively unlimited CIL pushes in progress. We don't want to do this - not only does it create contention on the iclogs and the state machine locks, we can run the log right out of space with outstanding pushes. Instead, limit the work concurrency to 4 concurrent works being processed at a time. This is enough concurrency to remove the CIL from being a CPU bound bottleneck but not enough to create new contention points or unbound concurrency issues.
--- fs/xfs/xfs_log_cil.c | 80 +++++++++++++++++++++++-------------------- fs/xfs/xfs_log_priv.h | 2 +- fs/xfs/xfs_super.c | 6 +++- 3 files changed, 48 insertions(+), 40 deletions(-)
fs/xfs/xfs_log_cil.c +42 -38
@@ -47,6 +47,34 @@ xlog_cil_ticket_alloc(return tic; } +/* +* Unavoidable forward declaration - xlog_cil_push_work() calls +* xlog_cil_ctx_alloc() itself. +*/ +static void xlog_cil_push_work (struct work_struct *work); + +static struct xfs_cil_ctx * +xlog_cil_ctx_alloc (void ) +{ +struct xfs_cil_ctx *ctx; + + ctx =kmem_zalloc (sizeof (*ctx),KM_NOFS ); +INIT_LIST_HEAD (&ctx->committing); +INIT_LIST_HEAD (&ctx->busy_extents); +INIT_WORK (&ctx->push_work, xlog_cil_push_work); +return ctx; +} + +static void +xlog_cil_ctx_switch ( +struct xfs_cil *cil, +struct xfs_cil_ctx *ctx) +{ + ctx->sequence = ++cil->xc_current_sequence; + ctx->cil = cil; + cil->xc_ctx = ctx; +} +/* * After the first stage of log recovery is done, we know where the head and * tail of the log are. We need this log initialisation done before we can
@@ -641,11 +669,11 @@ static voidxlog_cil_push_work ( struct work_struct *work) { -struct xfs_cil *cil = - container_of(work, struct xfs_cil, xc_push_work); +struct xfs_cil_ctx *ctx = + container_of(work, struct xfs_cil_ctx, push_work); +struct xfs_cil *cil = ctx->cil;struct xlog *log = cil->xc_log;struct xfs_log_vec *lv; -struct xfs_cil_ctx *ctx;struct xfs_cil_ctx *new_ctx;struct xlog_in_core *commit_iclog;struct xlog_ticket *tic;
@@ -660,11 +688,10 @@ xlog_cil_push_work(DECLARE_COMPLETION_ONSTACK (bdev_flush);bool push_commit_stable; - new_ctx =kmem_zalloc (sizeof (*new_ctx),KM_NOFS ); + new_ctx =xlog_cil_ctx_alloc (); new_ctx->ticket =xlog_cil_ticket_alloc (log);down_write (&cil->xc_ctx_lock); - ctx = cil->xc_ctx;spin_lock (&cil->xc_push_lock); push_seq = cil->xc_push_seq;
@@ -696,7 +723,7 @@ xlog_cil_push_work(/* check for a previously pushed sequence */ -if (push_seq < cil->xc_ctx->sequence) { +if (push_seq < ctx->sequence) {spin_unlock (&cil->xc_push_lock); goto out_skip; }
@@ -761,19 +788,7 @@ xlog_cil_push_work( }/* -* initialise the new context and attach it to the CIL. Then attach -* the current context to the CIL committing list so it can be found -* during log forces to extract the commit lsn of the sequence that -* needs to be forced. -*/ -INIT_LIST_HEAD (&new_ctx->committing); -INIT_LIST_HEAD (&new_ctx->busy_extents); - new_ctx->sequence = ctx->sequence +1 ; - new_ctx->cil = cil; - cil->xc_ctx = new_ctx; - -/* -* The switch is now done, so we can drop the context lock and move out +* Switch the contexts so we can drop the context lock and move out * of a shared context. We can't just go straight to the commit record, * though - we need to synchronise with previous and future commits so * that the commit records are correctly ordered in the log to ensure
@@ -798,7 +813,7 @@ xlog_cil_push_work(* deferencing a freed context pointer. */ spin_lock (&cil->xc_push_lock); - cil->xc_current_sequence = new_ctx->sequence; +xlog_cil_ctx_switch (cil, new_ctx);spin_unlock (&cil->xc_push_lock);up_write (&cil->xc_ctx_lock);
@@ -970,7 +985,7 @@ xlog_cil_push_background(spin_lock (&cil->xc_push_lock);if (cil->xc_push_seq < cil->xc_current_sequence) { cil->xc_push_seq = cil->xc_current_sequence; -queue_work (log->l_mp->m_cil_workqueue, &cil->xc_push_work); +queue_work (log->l_mp->m_cil_workqueue, &cil->xc_ctx->push_work); }/*
@@ -1036,7 +1051,7 @@ xlog_cil_push_now(/* start on any pending background push to minimise wait time on it */ if (!async) -flush_work (&cil->xc_push_work); +flush_workqueue (log->l_mp->m_cil_workqueue);/* * If the CIL is empty or we've already pushed the sequence then
@@ -1050,7 +1065,7 @@ xlog_cil_push_now( cil->xc_push_seq = push_seq; cil->xc_push_commit_stable = async; -queue_work (log->l_mp->m_cil_workqueue, &cil->xc_push_work); +queue_work (log->l_mp->m_cil_workqueue, &cil->xc_ctx->push_work);spin_unlock (&cil->xc_push_lock); }
@@ -1290,13 +1305,6 @@ xlog_cil_init(if (!cil)return -ENOMEM ; - ctx =kmem_zalloc (sizeof (*ctx),KM_MAYFAIL ); -if (!ctx) { -kmem_free (cil); -return -ENOMEM ; - } - -INIT_WORK (&cil->xc_push_work, xlog_cil_push_work);INIT_LIST_HEAD (&cil->xc_cil);INIT_LIST_HEAD (&cil->xc_committing);spin_lock_init (&cil->xc_cil_lock);
@@ -1304,16 +1312,12 @@ xlog_cil_init(init_waitqueue_head (&cil->xc_push_wait);init_rwsem (&cil->xc_ctx_lock);init_waitqueue_head (&cil->xc_commit_wait); - -INIT_LIST_HEAD (&ctx->committing); -INIT_LIST_HEAD (&ctx->busy_extents); - ctx->sequence =1 ; - ctx->cil = cil; - cil->xc_ctx = ctx; - cil->xc_current_sequence = ctx->sequence; - cil->xc_log = log; log->l_cilp = cil; + + ctx =xlog_cil_ctx_alloc (); +xlog_cil_ctx_switch (cil, ctx); +return 0 ; }
fs/xfs/xfs_log_priv.h +1 -1
@@ -245,6 +245,7 @@ struct xfs_cil_ctx {struct list_head iclog_entry;struct list_head committing;/* ctx committing list */ struct work_struct discard_endio_work; +struct work_struct push_work; };/*
@@ -277,7 +278,6 @@ struct xfs_cil {struct list_head xc_committing;wait_queue_head_t xc_commit_wait;xfs_csn_t xc_current_sequence; -struct work_struct xc_push_work;wait_queue_head_t xc_push_wait;/* background push throttle */ }____cacheline_aligned_in_smp ;
fs/xfs/xfs_super.c +5 -1
@@ -500,9 +500,13 @@ xfs_init_mount_workqueues(if (!mp->m_unwritten_workqueue) goto out_destroy_buf; +/* +* Limit the CIL pipeline depth to 4 concurrent works to bound the +* concurrency the log spinlocks will be exposed to. +*/ mp->m_cil_workqueue =alloc_workqueue ("xfs-cil/%s" ,XFS_WQFLAGS (WQ_FREEZABLE |WQ_MEM_RECLAIM |WQ_UNBOUND ), -0 , mp->m_super->s_id); +4 , mp->m_super->s_id);if (!mp->m_cil_workqueue) goto out_destroy_unwritten;
Signature · 1 line
2.31.1
PATCH v5 17/39 xfs: move log iovec alignment to preparation function
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
To include log op headers directly into the log iovec regions that the ophdrs wrap, we need to move the buffer alignment code from xlog_finish_iovec() to xlog_prepare_iovec(). This is because the xlog_op_header is only 12 bytes long, and we need the buffer that the caller formats their data into to be 8 byte aligned.
Hence once we start prepending the ophdr in xlog_prepare_iovec(), we are going to need to manage the padding directly to ensure that the buffer pointer returned is correctly aligned.
--- fs/xfs/xfs_log.h | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-)
fs/xfs/xfs_log.h +14 -11
@@ -21,6 +21,16 @@ struct xfs_log_vec {#define XFS_LOG_VEC_ORDERED (-1) +/* +* We need to make sure the buffer pointer returned is naturally aligned for the +* biggest basic data type we put into it. We have already accounted for this +* padding when sizing the buffer. +* +* However, this padding does not get written into the log, and hence we have to +* track the space used by the log vectors separately to prevent log space hangs +* due to inaccurate accounting (i.e. a leak) of the used log space through the +* CIL context ticket. +*/ static inline void *xlog_prepare_iovec (struct xfs_log_vec *lv,struct xfs_log_iovec **vecp,uint type)
@@ -34,6 +44,9 @@ xlog_prepare_iovec(struct xfs_log_vec *lv, struct xfs_log_iovec **vecp, vec = &lv->lv_iovecp[0 ]; } +if (!IS_ALIGNED (lv->lv_buf_len,sizeof (uint64_t ))) + lv->lv_buf_len =round_up (lv->lv_buf_len,sizeof (uint64_t )); + vec->i_type = type; vec->i_addr = lv->lv_buf + lv->lv_buf_len;
@@ -43,20 +56,10 @@ xlog_prepare_iovec(struct xfs_log_vec *lv, struct xfs_log_iovec **vecp,return vec->i_addr; } -/* -* We need to make sure the next buffer is naturally aligned for the biggest -* basic data type we put into it. We already accounted for this padding when -* sizing the buffer. -* -* However, this padding does not get written into the log, and hence we have to -* track the space used by the log vectors separately to prevent log space hangs -* due to inaccurate accounting (i.e. a leak) of the used log space through the -* CIL context ticket. -*/ static inline void xlog_finish_iovec (struct xfs_log_vec *lv,struct xfs_log_iovec *vec,int len) { - lv->lv_buf_len +=round_up (len,sizeof (uint64_t )); + lv->lv_buf_len += len; lv->lv_bytes += len; vec->i_len = len; }
Signature · 1 line
2.31.1
PATCH v5 1/39 xfs: log stripe roundoff is a property of the log
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
We don't need to look at the xfs_mount and superblock every time we need to do an iclog roundoff calculation. The property is fixed for the life of the log, so store the roundoff in the log at mount time and use that everywhere.
On a debug build:
$ size fs/xfs/xfs_log.o.* text data bss dec hex filename 27360 560 8 27928 6d18 fs/xfs/xfs_log.o.orig 27219 560 8 27787 6c8b fs/xfs/xfs_log.o.patched
--- fs/xfs/libxfs/xfs_log_format.h | 3 -- fs/xfs/xfs_log.c | 59 ++++++++++++++-------------------- fs/xfs/xfs_log_priv.h | 2 ++ 3 files changed, 27 insertions(+), 37 deletions(-)
fs/xfs/libxfs/xfs_log_format.h +0 -3
@@ -34,9 +34,6 @@ typedef uint32_t xlog_tid_t;#define XLOG_MIN_RECORD_BSHIFT 14/* 16384 == 1 << 14 */ #define XLOG_BIG_RECORD_BSHIFT 15/* 32k == 1 << 15 */ #define XLOG_MAX_RECORD_BSHIFT 18/* 256k == 1 << 18 */ -#define XLOG_BTOLSUNIT (log, b) (((b)+(log)->l_mp->m_sb.sb_logsunit-1) / \ - (log)->l_mp->m_sb.sb_logsunit) -#define XLOG_LSUNITTOB (log, su) ((su) * (log)->l_mp->m_sb.sb_logsunit)#define XLOG_HEADER_SIZE 512
fs/xfs/xfs_log.c +25 -34
107 lines not on this page · raw message
fs/xfs/xfs_log_priv.h +2 -0
@@ -436,6 +436,8 @@ struct xlog {#endif /* log recovery lsn tracking (for buffer submission */ xfs_lsn_t l_recovery_lsn; + +uint32_t l_iclog_roundoff;/* padding roundoff */ };#define XLOG_BUF_CANCEL_BUCKET (log, blkno) \
Signature · 1 line
2.31.1
PATCH v5 3/39 xfs: remove xfs_blkdev_issue_flush
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
It's a one line wrapper around blkdev_issue_flush(). Just replace it with direct calls to blkdev_issue_flush().
--- fs/xfs/xfs_buf.c | 2 +- fs/xfs/xfs_file.c | 6 +++--- fs/xfs/xfs_log.c | 2 +- fs/xfs/xfs_super.c | 7 ------- fs/xfs/xfs_super.h | 1 - 5 files changed, 5 insertions(+), 13 deletions(-)
fs/xfs/xfs_buf.c +1 -1
@@ -1958,7 +1958,7 @@ xfs_free_buftarg(percpu_counter_destroy (&btp->bt_io_count);list_lru_destroy (&btp->bt_lru); -xfs_blkdev_issue_flush (btp); +blkdev_issue_flush (btp->bt_bdev);kmem_free (btp); }
fs/xfs/xfs_file.c +3 -3
@@ -197,9 +197,9 @@ xfs_file_fsync(* inode size in case of an extending write. */ if (XFS_IS_REALTIME_INODE (ip)) -xfs_blkdev_issue_flush (mp->m_rtdev_targp); +blkdev_issue_flush (mp->m_rtdev_targp->bt_bdev);else if (mp->m_logdev_targp != mp->m_ddev_targp) -xfs_blkdev_issue_flush (mp->m_ddev_targp); +blkdev_issue_flush (mp->m_ddev_targp->bt_bdev);/* * Any inode that has dirty modifications in the log is pinned. The
@@ -219,7 +219,7 @@ xfs_file_fsync(*/ if (!log_flushed && !XFS_IS_REALTIME_INODE (ip) && mp->m_logdev_targp == mp->m_ddev_targp) -xfs_blkdev_issue_flush (mp->m_ddev_targp); +blkdev_issue_flush (mp->m_ddev_targp->bt_bdev);return error; }
fs/xfs/xfs_log.c +1 -1
@@ -1964,7 +1964,7 @@ xlog_sync(* layer state machine for preflushes. */ if (log->l_targ != log->l_mp->m_ddev_targp || split) { -xfs_blkdev_issue_flush (log->l_mp->m_ddev_targp); +blkdev_issue_flush (log->l_mp->m_ddev_targp->bt_bdev); need_flush = false; }
fs/xfs/xfs_super.c +0 -7
@@ -339,13 +339,6 @@ xfs_blkdev_put(blkdev_put (bdev,FMODE_READ |FMODE_WRITE |FMODE_EXCL ); } -void -xfs_blkdev_issue_flush ( -xfs_buftarg_t *buftarg) -{ -blkdev_issue_flush (buftarg->bt_bdev); -} - STATIC voidxfs_close_devices (struct xfs_mount *mp)
fs/xfs/xfs_super.h +0 -1
@@ -87,7 +87,6 @@ struct xfs_buftarg;struct block_device ;extern void xfs_flush_inodes (struct xfs_mount *mp); -extern void xfs_blkdev_issue_flush (struct xfs_buftarg *);extern xfs_agnumber_t xfs_set_inode_alloc (struct xfs_mount *,xfs_agnumber_t agcount);
Signature · 1 line
2.31.1
PATCH v5 4/39 xfs: async blkdev cache flush
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
The new checkpoint cache flush mechanism requires us to issue an unconditional cache flush before we start a new checkpoint. We don't want to block for this if we can help it, and we have a fair chunk of CPU work to do between starting the checkpoint and issuing the first journal IO.
Hence it makes sense to amortise the latency cost of the cache flush by issuing it asynchronously and then waiting for it only when we need to issue the first IO in the transaction.
To do this, we need async cache flush primitives to submit the cache flush bio and to wait on it. The block layer has no such primitives for filesystems, so roll our own for the moment.
--- fs/xfs/xfs_bio_io.c | 35 +++++++++++++++++++++++++++++++++++ fs/xfs/xfs_linux.h | 2 ++ 2 files changed, 37 insertions(+)
fs/xfs/xfs_bio_io.c +35 -0
@@ -9,6 +9,41 @@ static inline unsigned int bio_max_vecs(unsigned int count)return bio_max_segs (howmany (count,PAGE_SIZE )); } +static void +xfs_flush_bdev_async_endio ( +struct bio *bio) +{ +complete (bio->bi_private); +} + +/* +* Submit a request for an async cache flush to run. If the request queue does +* not require flush operations, just skip it altogether. If the caller needs +* to wait for the flush completion at a later point in time, they must supply a +* valid completion. This will be signalled when the flush completes. The +* caller never sees the bio that is issued here. +*/ +void +xfs_flush_bdev_async ( +struct bio *bio, +struct block_device *bdev, +struct completion *done) +{ +struct request_queue *q = bdev->bd_disk->queue; + +if (!test_bit (QUEUE_FLAG_WC , &q->queue_flags)) { +complete (done); +return ; + } + +bio_init (bio,NULL ,0 ); +bio_set_dev (bio, bdev); + bio->bi_opf =REQ_OP_WRITE |REQ_PREFLUSH |REQ_SYNC ; + bio->bi_private = done; + bio->bi_end_io = xfs_flush_bdev_async_endio; + +submit_bio (bio); +} int xfs_rw_bdev( struct block_device *bdev,
fs/xfs/xfs_linux.h +2 -0
@@ -196,6 +196,8 @@ static inline uint64_t howmany_64(uint64_t x, uint32_t y)int xfs_rw_bdev (struct block_device *bdev,sector_t sector,unsigned int count,char *data,unsigned int op); +void xfs_flush_bdev_async (struct bio *bio,struct block_device *bdev, +struct completion *done);#define ASSERT_ALWAYS (expr) \ (likely(expr) ? (void)0 : assfail(NULL, #expr, __FILE__, __LINE__))
Signature · 1 line
2.31.1
PATCH v5 25/39 xfs: CIL context doesn't need to count iovecs
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Now that we account for log opheaders in the log item formatting code, we don't actually use the aggregated count of log iovecs in the CIL for anything. Remove it and the tracking code that calculates it.
--- fs/xfs/xfs_log_cil.c | 22 ++++++---------------- fs/xfs/xfs_log_priv.h | 1 - 2 files changed, 6 insertions(+), 17 deletions(-)
fs/xfs/xfs_log_cil.c +6 -16
@@ -252,22 +252,18 @@ xlog_cil_alloc_shadow_bufs(/* * Prepare the log item for insertion into the CIL. Calculate the difference in -* log space and vectors it will consume, and if it is a new item pin it as -* well. +* log space it will consume, and if it is a new item pin it as well. */ STATIC voidxfs_cil_prepare_item (struct xlog *log,struct xfs_log_vec *lv,struct xfs_log_vec *old_lv, -int *diff_len, -int *diff_iovecs) +int *diff_len) {/* Account for the new LV being passed in */ -if (lv->lv_buf_len !=XFS_LOG_VEC_ORDERED ) { +if (lv->lv_buf_len !=XFS_LOG_VEC_ORDERED ) *diff_len += lv->lv_bytes; - *diff_iovecs += lv->lv_niovecs; - }/* * If there is no old LV, this is the first time we've seen the item in
@@ -284,7 +280,6 @@ xfs_cil_prepare_item(ASSERT (lv->lv_buf_len !=XFS_LOG_VEC_ORDERED ); *diff_len -= old_lv->lv_bytes; - *diff_iovecs -= old_lv->lv_niovecs; lv->lv_item->li_lv_shadow = old_lv; }
@@ -333,12 +328,10 @@ static voidxlog_cil_insert_format_items ( struct xlog *log, struct xfs_trans *tp, - int *diff_len, - int *diff_iovecs) + int *diff_len) { struct xfs_log_item *lip; -/* Bail out if we didn't find a log item. */ if (list_empty (&tp->t_items)) {ASSERT (0 );
@@ -381,7 +374,6 @@ xlog_cil_insert_format_items(* set the item up as though it is a new insertion so * that the space reservation accounting is correct. */ - *diff_iovecs -= lv->lv_niovecs; *diff_len -= lv->lv_bytes;/* Ensure the lv is set up according to ->iop_size */
@@ -406,7 +398,7 @@ xlog_cil_insert_format_items(ASSERT (IS_ALIGNED ((unsigned long )lv->lv_buf,sizeof (uint64_t ))); lip->li_ops->iop_format (lip, lv); insert: -xfs_cil_prepare_item (log, lv, old_lv, diff_len, diff_iovecs); +xfs_cil_prepare_item (log, lv, old_lv, diff_len); } }
@@ -426,7 +418,6 @@ xlog_cil_insert_items(struct xfs_cil_ctx *ctx = cil->xc_ctx;struct xfs_log_item *lip;int len =0 ; -int diff_iovecs =0 ;int iclog_space;int iovhdr_res =0 , split_res =0 , ctx_res =0 ;
@@ -436,7 +427,7 @@ xlog_cil_insert_items(* We can do this safely because the context can't checkpoint until we * are done so it doesn't matter exactly how we update the CIL. */ -xlog_cil_insert_format_items (log, tp, &len, &diff_iovecs); +xlog_cil_insert_format_items (log, tp, &len);spin_lock (&cil->xc_cil_lock);
@@ -471,7 +462,6 @@ xlog_cil_insert_items( } tp->t_ticket->t_curr_res -= len; ctx->space_used += len; - ctx->nvecs += diff_iovecs;/* * If we've overrun the reservation, dump the tx details before we move
fs/xfs/xfs_log_priv.h +0 -1
@@ -217,7 +217,6 @@ struct xfs_cil_ctx {xfs_lsn_t start_lsn;/* first LSN of chkpt commit */ xfs_lsn_t commit_lsn;/* chkpt commit record lsn */ struct xlog_ticket *ticket;/* chkpt ticket */ -int nvecs;/* number of regions */ int space_used;/* aggregate size of regions */ struct list_head busy_extents;/* busy extents in chkpt */ struct xfs_log_vec *lv_chain;/* logvecs being pushed */
Signature · 1 line
2.31.1
PATCH v5 27/39 xfs: lift init CIL reservation out of xc_cil_lock
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
The xc_cil_lock is the most highly contended lock in XFS now. To start the process of getting rid of it, lift the initial reservation of the CIL log space out from under the xc_cil_lock.
--- fs/xfs/xfs_log_cil.c | 27 ++++++++++++--------------- 1 file changed, 12 insertions(+), 15 deletions(-)
fs/xfs/xfs_log_cil.c +12 -15
@@ -430,23 +430,19 @@ xlog_cil_insert_items(*/ xlog_cil_insert_format_items (log, tp, &len); -spin_lock (&cil->xc_cil_lock); - -/* attach the transaction to the CIL if it has any busy extents */ -if (!list_empty (&tp->t_busy)) -list_splice_init (&tp->t_busy, &ctx->busy_extents); -/* * We need to take the CIL checkpoint unit reservation on the first * commit into the CIL. Test the XLOG_CIL_EMPTY bit first so we don't -* unnecessarily do an atomic op in the fast path here. +* unnecessarily do an atomic op in the fast path here. We don't need to +* hold the xc_cil_lock here to clear the XLOG_CIL_EMPTY bit as we are +* under the xc_ctx_lock here and that needs to be held exclusively to +* reset the XLOG_CIL_EMPTY bit. */ if (test_bit (XLOG_CIL_EMPTY , &cil->xc_flags) && -test_and_clear_bit (XLOG_CIL_EMPTY , &cil->xc_flags)) { +test_and_clear_bit (XLOG_CIL_EMPTY , &cil->xc_flags)) ctx_res = ctx->ticket->t_unit_res; - ctx->ticket->t_curr_res = ctx_res; - tp->t_ticket->t_curr_res -= ctx_res; - } + +spin_lock (&cil->xc_cil_lock);/* do we need space for more log record headers? */ iclog_space = log->l_iclog_size - log->l_iclog_hsize;
@@ -456,11 +452,9 @@ xlog_cil_insert_items(/* need to take into account split region headers, too */ split_res *= log->l_iclog_hsize +sizeof (struct xlog_op_header ); ctx->ticket->t_unit_res += split_res; - ctx->ticket->t_curr_res += split_res; - tp->t_ticket->t_curr_res -= split_res; -ASSERT (tp->t_ticket->t_curr_res >= len); } - tp->t_ticket->t_curr_res -= len; + tp->t_ticket->t_curr_res -= split_res + ctx_res + len; + ctx->ticket->t_curr_res += split_res + ctx_res; ctx->space_used += len;/*
@@ -498,6 +492,9 @@ xlog_cil_insert_items(list_move_tail (&lip->li_cil, &cil->xc_cil); } +/* attach the transaction to the CIL if it has any busy extents */ +if (!list_empty (&tp->t_busy)) +list_splice_init (&tp->t_busy, &ctx->busy_extents);spin_unlock (&cil->xc_cil_lock);if (tp->t_ticket->t_curr_res <0 )
Signature · 1 line
2.31.1
PATCH v5 31/39 xfs: track CIL ticket reservation in percpu structure
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
To get it out from under the cil spinlock.
--- fs/xfs/xfs_log_cil.c | 21 ++++++++++++++++----- fs/xfs/xfs_log_priv.h | 1 + 2 files changed, 17 insertions(+), 5 deletions(-)
fs/xfs/xfs_log_cil.c +16 -5
@@ -91,12 +91,17 @@ xlog_cil_pcp_aggregate(for_each_online_cpu (cpu) { cilpcp =per_cpu_ptr (cil->xc_pcp, cpu); + ctx->ticket->t_curr_res += cilpcp->space_reserved; + ctx->ticket->t_unit_res += cilpcp->space_reserved; + cilpcp->space_reserved =0 ; +/* * We're in the middle of switching cil contexts. Reset the * counter we use to detect when the current context is nearing * full. */ cilpcp->space_used =0 ; + } }
@@ -516,6 +521,7 @@ xlog_cil_insert_items(* based on how close we are to the hard limit. */ cilpcp =get_cpu_ptr (cil->xc_pcp); + cilpcp->space_reserved += ctx_res; cilpcp->space_used += len;if (space_used >=XLOG_CIL_SPACE_LIMIT (log) || cilpcp->space_used >
@@ -526,10 +532,6 @@ xlog_cil_insert_items( }put_cpu_ptr (cilpcp); -spin_lock (&cil->xc_cil_lock); - ctx->ticket->t_unit_res += ctx_res; - ctx->ticket->t_curr_res += ctx_res; -/* * If we've overrun the reservation, dump the tx details before we move * the log items. Shutdown is imminent...
@@ -551,6 +553,7 @@ xlog_cil_insert_items(* We do this here so we only need to take the CIL lock once during * the transaction commit. */ +spin_lock (&cil->xc_cil_lock);list_for_each_entry (lip, &tp->t_items, li_trans) {/* Skip items which aren't dirty in this transaction. */
@@ -1439,12 +1442,20 @@ xlog_cil_pcp_dead(spin_lock (&xlog_cil_pcp_lock);list_for_each_entry_safe (cil, n, &xlog_cil_pcp_list, xc_pcp_list) {struct xlog_cil_pcp *cilpcp =per_cpu_ptr (cil->xc_pcp, cpu); +struct xfs_cil_ctx *ctx;spin_unlock (&xlog_cil_pcp_lock);down_write (&cil->xc_ctx_lock); + ctx = cil->xc_ctx; + +atomic_add (cilpcp->space_used, &ctx->space_used); +if (ctx->ticket) { + ctx->ticket->t_curr_res += cilpcp->space_reserved; + ctx->ticket->t_unit_res += cilpcp->space_reserved; + } -atomic_add (cilpcp->space_used, &cil->xc_ctx->space_used); cilpcp->space_used =0 ; + cilpcp->space_reserved =0 ;up_write (&cil->xc_ctx_lock);spin_lock (&xlog_cil_pcp_lock);
fs/xfs/xfs_log_priv.h +1 -0
@@ -232,6 +232,7 @@ struct xfs_cil_ctx {*/ struct xlog_cil_pcp {uint32_t space_used; +uint32_t space_reserved;struct list_head busy_extents;struct list_head log_items; };
Signature · 1 line
2.31.1
PATCH v5 32/39 xfs: convert CIL busy extents to per-cpu
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
To get them out from under the CIL lock.
This is an unordered list, so we can simply punt it to per-cpu lists during transaction commits and reaggregate it back into a single list during the CIL push work.
--- fs/xfs/xfs_log_cil.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-)
fs/xfs/xfs_log_cil.c +19 -3
@@ -95,6 +95,11 @@ xlog_cil_pcp_aggregate( ctx->ticket->t_unit_res += cilpcp->space_reserved; cilpcp->space_reserved =0 ; +if (!list_empty (&cilpcp->busy_extents)) { +list_splice_init (&cilpcp->busy_extents, + &ctx->busy_extents); + } +/* * We're in the middle of switching cil contexts. Reset the * counter we use to detect when the current context is nearing
@@ -530,6 +535,9 @@ xlog_cil_insert_items(atomic_add (cilpcp->space_used, &ctx->space_used); cilpcp->space_used =0 ; } +/* attach the transaction to the CIL if it has any busy extents */ +if (!list_empty (&tp->t_busy)) +list_splice_init (&tp->t_busy, &cilpcp->busy_extents);put_cpu_ptr (cilpcp);/*
@@ -569,9 +577,6 @@ xlog_cil_insert_items(list_move_tail (&lip->li_cil, &cil->xc_cil); } -/* attach the transaction to the CIL if it has any busy extents */ -if (!list_empty (&tp->t_busy)) -list_splice_init (&tp->t_busy, &ctx->busy_extents);spin_unlock (&cil->xc_cil_lock);if (tp->t_ticket->t_curr_res <0 )
@@ -1453,6 +1458,10 @@ xlog_cil_pcp_dead( ctx->ticket->t_curr_res += cilpcp->space_reserved; ctx->ticket->t_unit_res += cilpcp->space_reserved; } +if (!list_empty (&cilpcp->busy_extents)) { +list_splice_init (&cilpcp->busy_extents, + &ctx->busy_extents); + } cilpcp->space_used =0 ; cilpcp->space_reserved =0 ;
@@ -1509,7 +1518,9 @@ static void __percpu *xlog_cil_pcp_alloc ( struct xfs_cil *cil) { +struct xlog_cil_pcp *cilpcp;void __percpu *pcp; +int cpu; pcp = alloc_percpu(struct xlog_cil_pcp);if (!pcp)
@@ -1519,6 +1530,11 @@ xlog_cil_pcp_alloc(free_percpu (pcp);return NULL ; } + +for_each_possible_cpu (cpu) { + cilpcp =per_cpu_ptr (pcp, cpu); +INIT_LIST_HEAD (&cilpcp->busy_extents); + }return pcp; }
Signature · 1 line
2.31.1
PATCH v5 35/39 xfs: convert log vector chain to use list heads
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Because the next change is going to require sorting log vectors, and that requires arbitrary rearrangement of the list which cannot be done easily with a single linked list.
--- fs/xfs/xfs_log.c | 35 +++++++++++++++++++++++++--------- fs/xfs/xfs_log.h | 2 +- fs/xfs/xfs_log_cil.c | 42 +++++++++++++++++++++++------------------ fs/xfs/xfs_log_priv.h | 4 ++-- fs/xfs/xfs_trans.c | 4 ++-- fs/xfs/xfs_trans_priv.h | 3 ++- 6 files changed, 57 insertions(+), 33 deletions(-)
fs/xfs/xfs_log.c +26 -9
@@ -848,6 +848,9 @@ xlog_write_unmount_record( .lv_niovecs = 1, .lv_iovecp = ®, }; +LIST_HEAD (lv_chain); +INIT_LIST_HEAD (&vec.lv_list); +list_add (&vec.lv_list, &lv_chain); BUILD_BUG_ON((sizeof(struct xlog_op_header) + sizeof(struct xfs_unmount_log_format)) !=
@@ -863,7 +866,7 @@ xlog_write_unmount_record(*/ if (log->l_targ != log->l_mp->m_ddev_targp)blkdev_issue_flush (log->l_targ->bt_bdev); -return xlog_write (log, &vec, ticket,NULL ,NULL , reg.i_len); +return xlog_write (log, &lv_chain, ticket,NULL ,NULL , reg.i_len); }/*
@@ -1581,13 +1584,16 @@ xlog_commit_record( .lv_iovecp = ®, };int error; +LIST_HEAD (lv_chain); +INIT_LIST_HEAD (&vec.lv_list); +list_add (&vec.lv_list, &lv_chain);if (XLOG_FORCED_SHUTDOWN (log))return -EIO ;/* account for space used by record data */ ticket->t_curr_res -= reg.i_len; - error =xlog_write (log, &vec, ticket, lsn, iclog, reg.i_len); + error =xlog_write (log, &lv_chain, ticket, lsn, iclog, reg.i_len);if (error)xfs_force_shutdown (log->l_mp,SHUTDOWN_LOG_IO_ERROR );return error;
@@ -2118,6 +2124,7 @@ xlog_print_trans(*/ static struct xfs_log_vec * xlog_write_single( + struct list_head *lv_chain, struct xfs_log_vec *log_vector, struct xlog_ticket *ticket, struct xlog_in_core *iclog,
@@ -2134,7 +2141,9 @@ xlog_write_single( iclog->ic_state == XLOG_STATE_WANT_SYNC); ptr = iclog->ic_datap + *log_offset; -for (lv = log_vector; lv; lv = lv->lv_next) { +for (lv = log_vector; + !list_entry_is_head (lv, lv_chain, lv_list); + lv =list_next_entry (lv, lv_list)) {/* * If the entire log vec does not fit in the iclog, punt it to * the partial copy loop which can handle this case.
@@ -2163,6 +2172,8 @@ xlog_write_single( *data_cnt += reg->i_len; } } +if (list_entry_is_head (lv, lv_chain, lv_list)) + lv =NULL ;ASSERT (*len ==0 || lv);return lv; }
@@ -2208,6 +2219,7 @@ xlog_write_get_more_iclog_space(static struct xfs_log_vec * xlog_write_partial( struct xlog *log, + struct list_head *lv_chain, struct xfs_log_vec *log_vector, struct xlog_ticket *ticket, struct xlog_in_core **iclogp,
@@ -2347,7 +2359,10 @@ xlog_write_partial(* the caller so it can go back to fast path copying. */ *iclogp = iclog; -return lv->lv_next; + lv =list_next_entry (lv, lv_list); +if (list_entry_is_head (lv, lv_chain, lv_list)) +return NULL ; +return lv; }/*
@@ -2393,14 +2408,14 @@ xlog_write_partial(int xlog_write (struct xlog *log, -struct xfs_log_vec *log_vector, +struct list_head *lv_chain,struct xlog_ticket *ticket,xfs_lsn_t *start_lsn,struct xlog_in_core **commit_iclog,uint32_t len) {struct xlog_in_core *iclog =NULL ; -struct xfs_log_vec *lv = log_vector; +struct xfs_log_vec *lv;int record_cnt =0 ;int data_cnt =0 ;int error =0 ;
@@ -2422,14 +2437,16 @@ xlog_write(if (start_lsn) *start_lsn =be64_to_cpu (iclog->ic_header.h_lsn); + lv = list_first_entry_or_null(lv_chain, struct xfs_log_vec, lv_list);while (lv) { - lv =xlog_write_single (lv, ticket, iclog, &log_offset, + lv =xlog_write_single (lv_chain, lv, ticket, iclog, &log_offset, &len, &record_cnt, &data_cnt);if (!lv)break ; - lv =xlog_write_partial (log, lv, ticket, &iclog, &log_offset, - &len, &record_cnt, &data_cnt); + lv =xlog_write_partial (log, lv_chain, lv, ticket, &iclog, + &log_offset, &len, &record_cnt, + &data_cnt);if (IS_ERR_OR_NULL (lv)) { error =PTR_ERR_OR_ZERO (lv);break ;
fs/xfs/xfs_log.h +1 -1
@@ -9,7 +9,7 @@struct xfs_cil_ctx ;struct xfs_log_vec { -struct xfs_log_vec *lv_next;/* next lv in build list */ +struct list_head lv_list;/* CIL lv chain ptrs */ int lv_niovecs;/* number of iovecs in lv */ struct xfs_log_iovec *lv_iovecp;/* iovec array */ struct xfs_log_item *lv_item;/* owner */
fs/xfs/xfs_log_cil.c +24 -18
127 lines not on this page · raw message
fs/xfs/xfs_log_priv.h +2 -2
@@ -221,7 +221,7 @@ struct xfs_cil_ctx {atomic_t space_used;/* aggregate size of regions */ struct list_head busy_extents;/* busy extents in chkpt */ struct list_head log_items;/* log items in chkpt */ -struct xfs_log_vec *lv_chain;/* logvecs being pushed */ +struct list_head lv_chain;/* logvecs being pushed */ struct list_head iclog_entry;struct list_head committing;/* ctx committing list */ struct work_struct discard_endio_work;
@@ -477,7 +477,7 @@ xlog_write_adv_cnt(void **ptr, int *len, int *off, size_t bytes)void xlog_print_tic_res (struct xfs_mount *mp,struct xlog_ticket *ticket);void xlog_print_trans (struct xfs_trans *); -int xlog_write (struct xlog *log,struct xfs_log_vec *log_vector, +int xlog_write (struct xlog *log,struct list_head *lv_chain,struct xlog_ticket *tic,xfs_lsn_t *start_lsn,struct xlog_in_core **commit_iclog,uint32_t len); int xlog_commit_record(struct xlog *log, struct xlog_ticket *ticket,
fs/xfs/xfs_trans.c +2 -2
@@ -735,7 +735,7 @@ xfs_log_item_batch_insert(void xfs_trans_committed_bulk (struct xfs_ail *ailp, -struct xfs_log_vec *log_vector, +struct list_head *lv_chain,xfs_lsn_t commit_lsn,bool aborted) {
@@ -750,7 +750,7 @@ xfs_trans_committed_bulk(spin_unlock (&ailp->ail_lock);/* unpin all the log items */ -for (lv = log_vector; lv; lv = lv->lv_next ) { +list_for_each_entry (lv, lv_chain, lv_list) {struct xfs_log_item *lip = lv->lv_item;xfs_lsn_t item_lsn;
fs/xfs/xfs_trans_priv.h +2 -1
@@ -18,7 +18,8 @@ void xfs_trans_add_item(struct xfs_trans *, struct xfs_log_item *);void xfs_trans_del_item (struct xfs_log_item *);void xfs_trans_unreserve_and_mod_sb (struct xfs_trans *tp); -void xfs_trans_committed_bulk (struct xfs_ail *ailp,struct xfs_log_vec *lv, +void xfs_trans_committed_bulk (struct xfs_ail *ailp, +struct list_head *lv_chain,xfs_lsn_t commit_lsn,bool aborted);/* * AIL traversal cursor.
Signature · 1 line
2.31.1
PATCH v5 10/39 xfs: AIL needs asynchronous CIL forcing
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
The AIL pushing is stalling on log forces when it comes across pinned items. This is happening on removal workloads where the AIL is dominated by stale items that are removed from AIL when the checkpoint that marks the items stale is committed to the journal. This results is relatively few items in the AIL, but those that are are often pinned as directories items are being removed from are still being logged.
As a result, many push cycles through the CIL will first issue a blocking log force to unpin the items. This can take some time to complete, with tracing regularly showing push delays of half a second and sometimes up into the range of several seconds. Sequences like this aren't uncommon:
....
399.829437: xfsaild: last lsn 0x11002dd000 count 101 stuck 101 flushing 0 tout 20
<wanted 20ms, got 270ms delay>
400.099622: xfsaild: target 0x11002f3600, prev 0x11002f3600, last lsn 0x0 400.099623: xfsaild: first lsn 0x11002f3600 400.099679: xfsaild: last lsn 0x1100305000 count 16 stuck 11 flushing 0 tout 50 <wanted 50ms, got 500ms delay> 400.589348: xfsaild: target 0x110032e600, prev 0x11002f3600, last lsn 0x0 400.589349: xfsaild: first lsn 0x1100305000 400.589595: xfsaild: last lsn 0x110032e600 count 156 stuck 101 flushing 30 tout 50 <wanted 50ms, got 460ms delay> 400.950341: xfsaild: target 0x1100353000, prev 0x110032e600, last lsn 0x0 400.950343: xfsaild: first lsn 0x1100317c00 400.950436: xfsaild: last lsn 0x110033d200 count 105 stuck 101 flushing 0 tout 20 <wanted 20ms, got 200ms delay> 401.142333: xfsaild: target 0x1100361600, prev 0x1100353000, last lsn 0x0 401.142334: xfsaild: first lsn 0x110032e600 401.142535: xfsaild: last lsn 0x1100353000 count 122 stuck 101 flushing 8 tout 10 <wanted 10ms, got 10ms delay> 401.154323: xfsaild: target 0x1100361600, prev 0x1100361600, last lsn 0x1100353000 401.154328: xfsaild: first lsn 0x1100353000 401.154389: xfsaild: last lsn 0x1100353000 count 101 stuck 101 flushing 0 tout 20 <wanted 20ms, got 300ms delay> 401.451525: xfsaild: target 0x1100361600, prev 0x1100361600, last lsn 0x0 401.451526: xfsaild: first lsn 0x1100353000 401.451804: xfsaild: last lsn 0x1100377200 count 170 stuck 22 flushing 122 tout 50
<wanted 50ms, got 500ms delay>
401.933581: xfsaild: target 0x1100361600, prev 0x1100361600, last lsn 0x0
....
In each of these cases, every AIL pass saw 101 log items stuck on the AIL (pinned) with very few other items being found. Each pass, a log force was issued, and delay between last/first is the sleep time
+ the sync log force time.
Some of these 101 items pinned the tail of the log. The tail of the log does slowly creep forward (first lsn), but the problem is that the log is actually out of reservation space because it's been running so many transactions that stale items that never reach the AIL but consume log space. Hence we have a largely empty AIL, with long term pins on items that pin the tail of the log that don't get pushed frequently enough to keep log space available.
The problem is the hundreds of milliseconds that we block in the log force pushing the CIL out to disk. The AIL should not be stalled like this - it needs to run and flush items that are at the tail of the log with minimal latency. What we really need to do is trigger a log flush, but then not wait for it at all - we've already done our waiting for stuff to complete when we backed off prior to the log force being issued.
Even if we remove the XFS_LOG_SYNC from the xfs_log_force() call, we still do a blocking flush of the CIL and that is what is causing the issue. Hence we need a new interface for the CIL to trigger an immediate background push of the CIL to get it moving faster but not to wait on that to occur. While the CIL is pushing, the AIL can also be pushing.
We already have an internal interface to do this - xlog_cil_push_now() - but we need a wrapper for it to be used externally. xlog_cil_force_seq() can easily be extended to do what we need as it already implements the synchronous CIL push via xlog_cil_push_now(). Add the necessary flags and "push current sequence" semantics to xlog_cil_force_seq() and convert the AIL pushing to use it.
One of the complexities here is that the CIL push does not guarantee that the commit record for the CIL checkpoint is written to disk. The current log force ensures this by submitting the current ACTIVE iclog that the commit record was written to. We need the CIL to actually write this commit record to disk for an async push to ensure that the checkpoint actually makes it to disk and unpins the pinned items in the checkpoint on completion. Hence we need to pass down to the CIL push that we are doing an async flush so that it can switch out the commit_iclog if necessary to get written to disk when the commit iclog is finally released.
--- fs/xfs/xfs_log.c | 38 ++++++++++++++------------ fs/xfs/xfs_log.h | 1 + fs/xfs/xfs_log_cil.c | 61 ++++++++++++++++++++++++++++++++++++------ fs/xfs/xfs_log_priv.h | 5 ++++ fs/xfs/xfs_sysfs.c | 1 + fs/xfs/xfs_trace.c | 1 + fs/xfs/xfs_trans.c | 2 +- fs/xfs/xfs_trans_ail.c | 11 +++++--- 8 files changed, 91 insertions(+), 29 deletions(-)
fs/xfs/xfs_log.c +21 -17
@@ -50,11 +50,6 @@ xlog_state_get_iclog_space(int *continued_write, int *logoffsetp); STATIC void -xlog_state_switch_iclogs ( -struct xlog *log, -struct xlog_in_core *iclog, -int eventual_size); -STATIC voidxlog_grant_push_ail (struct xlog *log,int need_bytes);
@@ -3104,7 +3099,7 @@ xfs_log_ticket_ungrant(* This routine will mark the current iclog in the ring as WANT_SYNC and move * the current iclog pointer to the next iclog in the ring. */ -STATIC void +void xlog_state_switch_iclogs( struct xlog *log, struct xlog_in_core *iclog,
@@ -3251,6 +3246,20 @@ xfs_log_force(return -EIO ; } +/* +* Force the log to a specific LSN. +* +* If an iclog with that lsn can be found: +* If it is in the DIRTY state, just return. +* If it is in the ACTIVE state, move the in-core log into the WANT_SYNC +* state and go to sleep or return. +* If it is in any other state, go to sleep or return. +* +* Synchronous forces are implemented with a wait queue. All callers trying +* to force a given lsn to disk must wait on the queue attached to the +* specific in-core log. When given in-core log finally completes its write +* to disk, that thread will wake up all threads waiting on the queue. +*/ static int xlog_force_lsn( struct xlog *log,
@@ -3314,18 +3323,13 @@ xlog_force_lsn( }/* -* Force the in-core log to disk for a specific LSN. +* Force the log to a specific checkpoint sequence. * -* Find in-core log with lsn. -* If it is in the DIRTY state, just return. -* If it is in the ACTIVE state, move the in-core log into the WANT_SYNC -* state and go to sleep or return. -* If it is in any other state, go to sleep or return. -* -* Synchronous forces are implemented with a wait queue. All callers trying -* to force a given lsn to disk must wait on the queue attached to the -* specific in-core log. When given in-core log finally completes its write -* to disk, that thread will wake up all threads waiting on the queue. +* First force the CIL so that all the required changes have been flushed to the +* iclogs. If the CIL force completed it will return a commit LSN that indicates +* the iclog that needs to be flushed to stable storage. If the caller needs +* a synchronous log force, we will wait on the iclog with the LSN returned by +* xlog_cil_force_seq() to be completed. */ int xfs_log_force_seq(
fs/xfs/xfs_log.h +1 -0
@@ -104,6 +104,7 @@ struct xlog_ticket;struct xfs_log_item ;struct xfs_item_ops ;struct xfs_trans ; +struct xlog ;int xfs_log_force (struct xfs_mount *mp,uint flags); int xfs_log_force_seq(struct xfs_mount *mp, xfs_csn_t seq, uint flags,
fs/xfs/xfs_log_cil.c +53 -8
130 lines not on this page · raw message
fs/xfs/xfs_log_priv.h +5 -0
@@ -273,6 +273,7 @@ struct xfs_cil {spinlock_t xc_push_lock____cacheline_aligned_in_smp ;xfs_csn_t xc_push_seq; +bool xc_push_commit_stable;struct list_head xc_committing;wait_queue_head_t xc_commit_wait;xfs_csn_t xc_current_sequence;
@@ -487,9 +488,12 @@ int xlog_write(struct xlog *log, struct xfs_log_vec *log_vector, struct xlog_in_core **commit_iclog, uint optype);int xlog_commit_record (struct xlog *log,struct xlog_ticket *ticket,struct xlog_in_core **iclog,xfs_lsn_t *lsn); +void xfs_log_ticket_ungrant (struct xlog *log,struct xlog_ticket *ticket);void xfs_log_ticket_regrant (struct xlog *log,struct xlog_ticket *ticket); +void xlog_state_switch_iclogs (struct xlog *log,struct xlog_in_core *iclog, +int eventual_size);int xlog_state_release_iclog (struct xlog *log,struct xlog_in_core *iclog);/*
@@ -560,6 +564,7 @@ void xlog_cil_commit(struct xlog *log, struct xfs_trans *tp,/* * CIL force routines */ +void xlog_cil_flush (struct xlog *log);xfs_lsn_t xlog_cil_force_seq (struct xlog *log,xfs_csn_t sequence); static inline void
fs/xfs/xfs_sysfs.c +1 -0
@@ -10,6 +10,7 @@#include "xfs_log_format.h" #include "xfs_trans_resv.h" #include "xfs_sysfs.h" +#include "xfs_log.h" #include "xfs_log_priv.h" #include "xfs_mount.h"
fs/xfs/xfs_trace.c +1 -0
@@ -20,6 +20,7 @@#include "xfs_bmap.h" #include "xfs_attr.h" #include "xfs_trans.h" +#include "xfs_log.h" #include "xfs_log_priv.h" #include "xfs_buf_item.h" #include "xfs_quota.h"
fs/xfs/xfs_trans.c +1 -1
@@ -9,7 +9,6 @@#include "xfs_shared.h" #include "xfs_format.h" #include "xfs_log_format.h" -#include "xfs_log_priv.h" #include "xfs_trans_resv.h" #include "xfs_mount.h" #include "xfs_extent_busy.h"
@@ -17,6 +16,7 @@#include "xfs_trans.h" #include "xfs_trans_priv.h" #include "xfs_log.h" +#include "xfs_log_priv.h" #include "xfs_trace.h" #include "xfs_error.h" #include "xfs_defer.h"
fs/xfs/xfs_trans_ail.c +8 -3
@@ -17,6 +17,7 @@#include "xfs_errortag.h" #include "xfs_error.h" #include "xfs_log.h" +#include "xfs_log_priv.h" #ifdef DEBUG /*
@@ -429,8 +430,12 @@ xfsaild_push(/* * If we encountered pinned items or did not finish writing out all -* buffers the last time we ran, force the log first and wait for it -* before pushing again. +* buffers the last time we ran, force a background CIL push to get the +* items unpinned in the near future. We do not wait on the CIL push as +* that could stall us for seconds if there is enough background IO +* load. Stalling for that long when the tail of the log is pinned and +* needs flushing will hard stop the transaction subsystem when log +* space runs out. */ if (ailp->ail_log_flush && ailp->ail_last_pushed_lsn == 0 && (!list_empty_careful(&ailp->ail_buf_list) ||
@@ -438,7 +443,7 @@ xfsaild_push( ailp->ail_log_flush =0 ;XFS_STATS_INC (mp, xs_push_ail_flush); -xfs_log_force (mp,XFS_LOG_SYNC ); +xlog_cil_flush (mp->m_log); }spin_lock (&ailp->ail_lock);
Signature · 1 line
2.31.1
PATCH v5 20/39 xfs: pass lv chain length into xlog_write()
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
The caller of xlog_write() usually has a close accounting of the aggregated vector length contained in the log vector chain passed to xlog_write(). There is no need to iterate the chain to calculate he length of the data in xlog_write_calculate_len() if the caller is already iterating that chain to build it.
Passing in the vector length avoids doing an extra chain iteration, which can be a significant amount of work given that large CIL commits can have hundreds of thousands of vectors attached to the chain.
--- fs/xfs/xfs_log.c | 37 ++++++------------------------------- fs/xfs/xfs_log_cil.c | 16 +++++++++++----- fs/xfs/xfs_log_priv.h | 2 +- 3 files changed, 18 insertions(+), 37 deletions(-)
fs/xfs/xfs_log.c +6 -31
@@ -864,7 +864,8 @@ xlog_write_unmount_record(*/ if (log->l_targ != log->l_mp->m_ddev_targp)blkdev_issue_flush (log->l_targ->bt_bdev); -return xlog_write (log, &vec, ticket,NULL ,NULL ,XLOG_UNMOUNT_TRANS ); +return xlog_write (log, &vec, ticket,NULL ,NULL ,XLOG_UNMOUNT_TRANS , + reg.i_len); }/*
@@ -1588,7 +1589,8 @@ xlog_commit_record(/* account for space used by record data */ ticket->t_curr_res -= reg.i_len; - error =xlog_write (log, &vec, ticket, lsn, iclog,XLOG_COMMIT_TRANS ); + error =xlog_write (log, &vec, ticket, lsn, iclog,XLOG_COMMIT_TRANS , + reg.i_len);if (error)xfs_force_shutdown (log->l_mp,SHUTDOWN_LOG_IO_ERROR );return error;
@@ -2108,32 +2110,6 @@ xlog_print_trans( } } -/* -* Calculate the potential space needed by the log vector. All regions contain -* their own opheaders and they are accounted for in region space so we don't -* need to add them to the vector length here. -*/ -static int -xlog_write_calc_vec_length ( -struct xlog_ticket *ticket, -struct xfs_log_vec *log_vector, -uint optype) -{ -struct xfs_log_vec *lv; -int len =0 ; -int i; - -for (lv = log_vector; lv; lv = lv->lv_next) { -/* we don't write ordered log vectors */ -if (lv->lv_buf_len ==XFS_LOG_VEC_ORDERED ) -continue ; - -for (i =0 ; i < lv->lv_niovecs; i++) - len += lv->lv_iovecp[i].i_len; - } -return len; -} -static xlog_op_header_t * xlog_write_setup_ophdr( struct xlog_op_header *ophdr,
@@ -2296,13 +2272,13 @@ xlog_write(struct xlog_ticket *ticket, xfs_lsn_t *start_lsn, struct xlog_in_core **commit_iclog, - uint optype) + uint optype, + uint32_t len) { struct xlog_in_core *iclog = NULL;struct xfs_log_vec *lv = log_vector;struct xfs_log_iovec *vecp = lv->lv_iovecp;int index =0 ; -int len;int partial_copy =0 ;int partial_copy_len =0 ;int contwr =0 ;
@@ -2317,7 +2293,6 @@ xlog_write(xfs_force_shutdown (log->l_mp,SHUTDOWN_LOG_IO_ERROR ); } - len =xlog_write_calc_vec_length (ticket, log_vector, optype);if (start_lsn) *start_lsn =0 ;while (lv && (!lv->lv_niovecs || index < lv->lv_niovecs)) {
fs/xfs/xfs_log_cil.c +11 -5
@@ -710,11 +710,12 @@ xlog_cil_build_trans_hdr(sizeof (struct xfs_trans_header ); hdr->lhdr[1 ].i_type =XLOG_REG_TYPE_TRANSHDR ; - tic->t_curr_res -= hdr->lhdr[0 ].i_len + hdr->lhdr[1 ].i_len; - lvhdr->lv_niovecs =2 ; lvhdr->lv_iovecp = &hdr->lhdr[0 ]; + lvhdr->lv_bytes = hdr->lhdr[0 ].i_len + hdr->lhdr[1 ].i_len; lvhdr->lv_next = ctx->lv_chain; + + tic->t_curr_res -= lvhdr->lv_bytes; }/*
@@ -742,7 +743,8 @@ xlog_cil_push_work(struct xfs_log_vec *lv;struct xfs_cil_ctx *new_ctx;struct xlog_in_core *commit_iclog; -int num_iovecs; +int num_iovecs =0 ; +int num_bytes =0 ;int error =0 ;struct xlog_cil_trans_hdr thdr;struct xfs_log_vec lvhdr = {NULL };
@@ -835,7 +837,6 @@ xlog_cil_push_work(* by the flush lock. */ lv =NULL ; - num_iovecs =0 ;while (!list_empty (&cil->xc_cil)) {struct xfs_log_item *item;
@@ -849,6 +850,10 @@ xlog_cil_push_work( lv = item->li_lv; item->li_lv =NULL ; num_iovecs += lv->lv_niovecs; + +/* we don't write ordered log vectors */ +if (lv->lv_buf_len !=XFS_LOG_VEC_ORDERED ) + num_bytes += lv->lv_bytes; }/*
@@ -887,6 +892,7 @@ xlog_cil_push_work(* transaction header here as it is not accounted for in xlog_write(). */ xlog_cil_build_trans_hdr (ctx, &thdr, &lvhdr, num_iovecs); + num_bytes += lvhdr.lv_bytes;/* * Before we format and submit the first iclog, we have to ensure that
@@ -901,7 +907,7 @@ xlog_cil_push_work(* write head. */ error =xlog_write (log, &lvhdr, ctx->ticket, &ctx->start_lsn,NULL , -XLOG_START_TRANS ); +XLOG_START_TRANS , num_bytes);if (error) goto out_abort_free_ticket;
fs/xfs/xfs_log_priv.h +1 -1
@@ -459,7 +459,7 @@ void xlog_print_tic_res(struct xfs_mount *mp, struct xlog_ticket *ticket);void xlog_print_trans (struct xfs_trans *);int xlog_write (struct xlog *log,struct xfs_log_vec *log_vector,struct xlog_ticket *tic,xfs_lsn_t *start_lsn, -struct xlog_in_core **commit_iclog,uint optype); +struct xlog_in_core **commit_iclog,uint optype,uint32_t len);int xlog_commit_record (struct xlog *log,struct xlog_ticket *ticket,struct xlog_in_core **iclog,xfs_lsn_t *lsn);
Signature · 1 line
2.31.1
PATCH v5 37/39 xfs: avoid cil push lock if possible
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Because now it hurts when the CIL fills up.
- 37.20% __xfs_trans_commit
- 35.84% xfs_log_commit_cil
- 19.34% _raw_spin_lock
- do_raw_spin_lock
19.01% __pv_queued_spin_lock_slowpath
- 4.20% xfs_log_ticket_ungrant
0.90% xfs_log_space_wake
--- fs/xfs/xfs_log_cil.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
fs/xfs/xfs_log_cil.c +11 -3
@@ -1131,10 +1131,18 @@ xlog_cil_push_background(ASSERT (!test_bit (XLOG_CIL_EMPTY , &cil->xc_flags));/* -* Don't do a background push if we haven't used up all the -* space available yet. +* We are done if: +* - we haven't used up all the space available yet; or +* - we've already queued up a push; and +* - we're not over the hard limit; and +* - nothing has been over the hard limit. +* +* If so, we don't need to take the push lock as there's nothing to do. */ -if (space_used <XLOG_CIL_SPACE_LIMIT (log)) { +if (space_used <XLOG_CIL_SPACE_LIMIT (log) || + (cil->xc_push_seq == cil->xc_current_sequence && + space_used <XLOG_CIL_BLOCKING_SPACE_LIMIT (log) && + !waitqueue_active (&cil->xc_push_wait))) {up_read (&cil->xc_ctx_lock);return ; }
Signature · 1 line
2.31.1
PATCH v5 12/39 xfs: factor out the CIL transaction header building
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
It is static code deep in the middle of the CIL push logic. Factor it out into a helper so that it is clear and easy to modify separately.
--- fs/xfs/xfs_log_cil.c | 71 +++++++++++++++++++++++++++++--------------- 1 file changed, 47 insertions(+), 24 deletions(-)
fs/xfs/xfs_log_cil.c +47 -24
@@ -651,6 +651,41 @@ xlog_cil_process_committed( } } +struct xlog_cil_trans_hdr { +struct xfs_trans_header thdr; +struct xfs_log_iovec lhdr; +}; + +/* +* Build a checkpoint transaction header to begin the journal transaction. We +* need to account for the space used by the transaction header here as it is +* not accounted for in xlog_write(). +*/ +static void +xlog_cil_build_trans_hdr ( +struct xfs_cil_ctx *ctx, +struct xlog_cil_trans_hdr *hdr, +struct xfs_log_vec *lvhdr, +int num_iovecs) +{ +struct xlog_ticket *tic = ctx->ticket; + +memset (hdr,0 ,sizeof (*hdr)); + + hdr->thdr.th_magic =XFS_TRANS_HEADER_MAGIC ; + hdr->thdr.th_type =XFS_TRANS_CHECKPOINT ; + hdr->thdr.th_tid = tic->t_tid; + hdr->thdr.th_num_items = num_iovecs; + hdr->lhdr.i_addr = &hdr->thdr; + hdr->lhdr.i_len =sizeof (xfs_trans_header_t); + hdr->lhdr.i_type =XLOG_REG_TYPE_TRANSHDR ; + tic->t_curr_res -= hdr->lhdr.i_len +sizeof (struct xlog_op_header ); + + lvhdr->lv_niovecs =1 ; + lvhdr->lv_iovecp = &hdr->lhdr; + lvhdr->lv_next = ctx->lv_chain; +} +/* * Push the Committed Item List to the log. *
@@ -676,11 +711,9 @@ xlog_cil_push_work(struct xfs_log_vec *lv;struct xfs_cil_ctx *new_ctx;struct xlog_in_core *commit_iclog; -struct xlog_ticket *tic;int num_iovecs;int error =0 ; -struct xfs_trans_header thdr; -struct xfs_log_iovec lhdr; +struct xlog_cil_trans_hdr thdr;struct xfs_log_vec lvhdr = {NULL };xfs_lsn_t commit_lsn;xfs_lsn_t push_seq;
@@ -821,24 +854,8 @@ xlog_cil_push_work(* Build a checkpoint transaction header and write it to the log to * begin the transaction. We need to account for the space used by the * transaction header here as it is not accounted for in xlog_write(). -* -* The LSN we need to pass to the log items on transaction commit is -* the LSN reported by the first log vector write. If we use the commit -* record lsn then we can move the tail beyond the grant write head. */ - tic = ctx->ticket; - thdr.th_magic =XFS_TRANS_HEADER_MAGIC ; - thdr.th_type =XFS_TRANS_CHECKPOINT ; - thdr.th_tid = tic->t_tid; - thdr.th_num_items = num_iovecs; - lhdr.i_addr = &thdr; - lhdr.i_len =sizeof (xfs_trans_header_t); - lhdr.i_type =XLOG_REG_TYPE_TRANSHDR ; - tic->t_curr_res -= lhdr.i_len +sizeof (xlog_op_header_t); - - lvhdr.lv_niovecs =1 ; - lvhdr.lv_iovecp = &lhdr; - lvhdr.lv_next = ctx->lv_chain; +xlog_cil_build_trans_hdr (ctx, &thdr, &lvhdr, num_iovecs);/* * Before we format and submit the first iclog, we have to ensure that
@@ -846,7 +863,13 @@ xlog_cil_push_work(*/ wait_for_completion (&bdev_flush); - error =xlog_write (log, &lvhdr, tic, &ctx->start_lsn,NULL , +/* +* The LSN we need to pass to the log items on transaction commit is the +* LSN reported by the first log vector write, not the commit lsn. If we +* use the commit record lsn then we can move the tail beyond the grant +* write head. +*/ + error =xlog_write (log, &lvhdr, ctx->ticket, &ctx->start_lsn,NULL ,XLOG_START_TRANS );if (error) goto out_abort_free_ticket;
@@ -885,11 +908,11 @@ xlog_cil_push_work( }spin_unlock (&cil->xc_push_lock); - error =xlog_commit_record (log, tic, &commit_iclog, &commit_lsn); + error =xlog_commit_record (log, ctx->ticket, &commit_iclog, &commit_lsn);if (error) goto out_abort_free_ticket; -xfs_log_ticket_ungrant (log, tic); +xfs_log_ticket_ungrant (log, ctx->ticket);spin_lock (&commit_iclog->ic_callback_lock);if (commit_iclog->ic_state ==XLOG_STATE_IOERROR ) {
@@ -948,7 +971,7 @@ xlog_cil_push_work(return ; out_abort_free_ticket: -xfs_log_ticket_ungrant (log, tic); +xfs_log_ticket_ungrant (log, ctx->ticket); out_abort:ASSERT (XLOG_FORCED_SHUTDOWN (log));xlog_cil_committed (ctx);
Signature · 1 line
2.31.1
PATCH v5 34/39 xfs: convert CIL to unordered per cpu lists
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
So that we can remove the cil_lock which is a global serialisation point. We've already got ordering sorted, so all we need to do is treat the CIL list like the busy extent list and reconstruct it before the push starts.
This is what we're trying to avoid:
- 75.35% 1.83% [kernel] [k] xfs_log_commit_cil
- 46.35% xfs_log_commit_cil
- 41.54% _raw_spin_lock
- 67.30% do_raw_spin_lock
66.96% __pv_queued_spin_lock_slowpath
Which happens on a 32p system when running a 32-way 'rm -rf' workload. After this patch:
- 20.90% 3.23% [kernel] [k] xfs_log_commit_cil
- 17.67% xfs_log_commit_cil
- 6.51% xfs_log_ticket_ungrant
1.40% xfs_log_space_wake
2.32% memcpy_erms
- 2.18% xfs_buf_item_committing
- 2.12% xfs_buf_item_release
- 1.03% xfs_buf_unlock
0.96% up
0.72% xfs_buf_rele
1.33% xfs_inode_item_format
1.19% down_read
0.91% up_read
0.76% xfs_buf_item_format
- 0.68% kmem_alloc_large
- 0.67% kmem_alloc
0.64% __kmalloc
0.50% xfs_buf_item_sizeIt kinda looks like the workload is running out of log space all the time. But all the spinlock contention is gone and the transaction commit rate has gone from 800k/s to 1.3M/s so the amount of real work being done has gone up a *lot*.
--- fs/xfs/xfs_log_cil.c | 69 +++++++++++++++++++------------------------ fs/xfs/xfs_log_priv.h | 3 +- 2 files changed, 31 insertions(+), 41 deletions(-)
fs/xfs/xfs_log_cil.c +30 -39
@@ -72,6 +72,7 @@ xlog_cil_ctx_alloc(void) ctx =kmem_zalloc (sizeof (*ctx),KM_NOFS );INIT_LIST_HEAD (&ctx->committing);INIT_LIST_HEAD (&ctx->busy_extents); +INIT_LIST_HEAD (&ctx->log_items);INIT_WORK (&ctx->push_work, xlog_cil_push_work);return ctx; }
@@ -99,6 +100,8 @@ xlog_cil_pcp_aggregate(list_splice_init (&cilpcp->busy_extents, &ctx->busy_extents); } +if (!list_empty (&cilpcp->log_items)) +list_splice_init (&cilpcp->log_items, &ctx->log_items);/* * We're in the middle of switching cil contexts. Reset the
@@ -482,10 +485,9 @@ xlog_cil_insert_items(/* * We need to take the CIL checkpoint unit reservation on the first * commit into the CIL. Test the XLOG_CIL_EMPTY bit first so we don't -* unnecessarily do an atomic op in the fast path here. We don't need to -* hold the xc_cil_lock here to clear the XLOG_CIL_EMPTY bit as we are -* under the xc_ctx_lock here and that needs to be held exclusively to -* reset the XLOG_CIL_EMPTY bit. +* unnecessarily do an atomic op in the fast path here. We can clear the +* XLOG_CIL_EMPTY bit as we are under the xc_ctx_lock here and that +* needs to be held exclusively to reset the XLOG_CIL_EMPTY bit. */ if (test_bit (XLOG_CIL_EMPTY , &cil->xc_flags) &&test_and_clear_bit (XLOG_CIL_EMPTY , &cil->xc_flags))
@@ -539,24 +541,6 @@ xlog_cil_insert_items(/* attach the transaction to the CIL if it has any busy extents */ if (!list_empty (&tp->t_busy))list_splice_init (&tp->t_busy, &cilpcp->busy_extents); -put_cpu_ptr (cilpcp); - -/* -* If we've overrun the reservation, dump the tx details before we move -* the log items. Shutdown is imminent... -*/ - tp->t_ticket->t_curr_res -= ctx_res + len; -if (WARN_ON (tp->t_ticket->t_curr_res <0 )) { -xfs_warn (log->l_mp,"Transaction log reservation overrun:" ); -xfs_warn (log->l_mp, -" log items: %d bytes (iov hdrs: %d bytes)" , - len, iovhdr_res); -xfs_warn (log->l_mp," split region headers: %d bytes" , - split_res); -xfs_warn (log->l_mp," ctx ticket: %d bytes" , ctx_res); -xlog_print_trans (tp); - } -/* * Now update the order of everything modified in the transaction * and insert items into the CIL if they aren't already there.
@@ -564,7 +548,6 @@ xlog_cil_insert_items(* the transaction commit. */ order =atomic_inc_return (&ctx->order_id); -spin_lock (&cil->xc_cil_lock);list_for_each_entry (lip, &tp->t_items, li_trans) {/* Skip items which aren't dirty in this transaction. */
@@ -574,10 +557,25 @@ xlog_cil_insert_items( lip->li_order_id = order;if (!list_empty (&lip->li_cil))continue ; -list_add_tail (&lip->li_cil, &cil->xc_cil); +list_add_tail (&lip->li_cil, &cilpcp->log_items); } +put_cpu_ptr (cilpcp); -spin_unlock (&cil->xc_cil_lock); +/* +* If we've overrun the reservation, dump the tx details before we move +* the log items. Shutdown is imminent... +*/ + tp->t_ticket->t_curr_res -= ctx_res + len; +if (WARN_ON (tp->t_ticket->t_curr_res <0 )) { +xfs_warn (log->l_mp,"Transaction log reservation overrun:" ); +xfs_warn (log->l_mp, +" log items: %d bytes (iov hdrs: %d bytes)" , + len, iovhdr_res); +xfs_warn (log->l_mp," split region headers: %d bytes" , + split_res); +xfs_warn (log->l_mp," ctx ticket: %d bytes" , ctx_res); +xlog_print_trans (tp); + }if (tp->t_ticket->t_curr_res <0 )xfs_force_shutdown (log->l_mp,SHUTDOWN_LOG_IO_ERROR );
@@ -921,18 +919,12 @@ xlog_cil_push_work(xlog_cil_pcp_aggregate (cil, ctx); -/* -* Pull all the log vectors off the items in the CIL, and remove the -* items from the CIL. We don't need the CIL lock here because it's only -* needed on the transaction commit side which is currently locked out -* by the flush lock. -*/ -list_sort (NULL , &cil->xc_cil, xlog_cil_order_cmp); - lv =NULL ; -while (!list_empty (&cil->xc_cil)) { +list_sort (NULL , &ctx->log_items, xlog_cil_order_cmp); + +while (!list_empty (&ctx->log_items)) {struct xfs_log_item *item; - item =list_first_entry (&cil->xc_cil, + item =list_first_entry (&ctx->log_items, struct xfs_log_item, li_cil);list_del_init (&item->li_cil); item->li_order_id =0 ;
@@ -1125,7 +1117,6 @@ xlog_cil_push_background(* The cil won't be empty because we are called while holding the * context lock so whatever we added to the CIL will still be there. */ -ASSERT (!list_empty (&cil->xc_cil));ASSERT (!test_bit (XLOG_CIL_EMPTY , &cil->xc_flags));/*
@@ -1484,6 +1475,8 @@ xlog_cil_pcp_dead(list_splice_init (&cilpcp->busy_extents, &ctx->busy_extents); } +if (!list_empty (&cilpcp->log_items)) +list_splice_init (&cilpcp->log_items, &ctx->log_items); cilpcp->space_used =0 ; cilpcp->space_reserved =0 ;
@@ -1556,6 +1549,7 @@ xlog_cil_pcp_alloc(for_each_possible_cpu (cpu) { cilpcp =per_cpu_ptr (pcp, cpu);INIT_LIST_HEAD (&cilpcp->busy_extents); +INIT_LIST_HEAD (&cilpcp->log_items); }return pcp; }
@@ -1591,9 +1585,7 @@ xlog_cil_init(return -ENOMEM ; } -INIT_LIST_HEAD (&cil->xc_cil);INIT_LIST_HEAD (&cil->xc_committing); -spin_lock_init (&cil->xc_cil_lock);spin_lock_init (&cil->xc_push_lock);init_waitqueue_head (&cil->xc_push_wait);init_rwsem (&cil->xc_ctx_lock);
@@ -1619,7 +1611,6 @@ xlog_cil_destroy(kmem_free (cil->xc_ctx); } -ASSERT (list_empty (&cil->xc_cil));ASSERT (test_bit (XLOG_CIL_EMPTY , &cil->xc_flags));xlog_cil_pcp_free (cil, cil->xc_pcp);kmem_free (cil);
fs/xfs/xfs_log_priv.h +1 -2
@@ -220,6 +220,7 @@ struct xfs_cil_ctx {struct xlog_ticket *ticket;/* chkpt ticket */ atomic_t space_used;/* aggregate size of regions */ struct list_head busy_extents;/* busy extents in chkpt */ +struct list_head log_items;/* log items in chkpt */ struct xfs_log_vec *lv_chain;/* logvecs being pushed */ struct list_head iclog_entry;struct list_head committing;/* ctx committing list */
@@ -258,8 +259,6 @@ struct xfs_cil {struct xlog *xc_log;unsigned long xc_flags;atomic_t xc_iclog_hdrs; -struct list_head xc_cil; -spinlock_t xc_cil_lock;struct rw_semaphore xc_ctx_lock____cacheline_aligned_in_smp ;struct xfs_cil_ctx *xc_ctx;
Signature · 1 line
2.31.1
PATCH v5 18/39 xfs: reserve space and initialise xlog_op_header in item formatting
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Current xlog_write() adds op headers to the log manually for every log item region that is in the vector passed to it. While xlog_write() needs to stamp the transaction ID into the ophdr, we already know it's length, flags, clientid, etc at CIL commit time.
This means the only time that xlog write really needs to format and reserve space for a new ophdr is when a region is split across two iclogs. Adding the opheader and accounting for it as part of the normal formatted item region means we simplify the accounting of space used by a transaction and we don't have to special case reserving of space in for the ophdrs in xlog_write(). It also means we can largely initialise the ophdr in transaction commit instead of xlog_write, making the xlog_write formatting inner loop much tighter.
xlog_prepare_iovec() is now too large to stay as an inline function, so we move it out of line and into xfs_log.c.
Object sizes:
text data bss dec hex filename
1125934 305951 484 1432369 15db31 fs/xfs/built-in.a.before
1123360 305951 484 1429795 15d123 fs/xfs/built-in.a.after
So the code is a roughly 2.5kB smaller with xlog_prepare_iovec() now out of line, even though it grew in size itself.
--- fs/xfs/xfs_log.c | 115 +++++++++++++++++++++++++++++-------------- fs/xfs/xfs_log.h | 42 +++------------- fs/xfs/xfs_log_cil.c | 25 +++++----- 3 files changed, 99 insertions(+), 83 deletions(-)
fs/xfs/xfs_log.c +77 -38
@@ -89,6 +89,62 @@ xlog_iclogs_empty(static int xfs_log_cover (struct xfs_mount *); +/* +* We need to make sure the buffer pointer returned is naturally aligned for the +* biggest basic data type we put into it. We have already accounted for this +* padding when sizing the buffer. +* +* However, this padding does not get written into the log, and hence we have to +* track the space used by the log vectors separately to prevent log space hangs +* due to inaccurate accounting (i.e. a leak) of the used log space through the +* CIL context ticket. +* +* We also add space for the xlog_op_header that describes this region in the +* log. This prepends the data region we return to the caller to copy their data +* into, so do all the static initialisation of the ophdr now. Because the ophdr +* is not 8 byte aligned, we have to be careful to ensure that we align the +* start of the buffer such that the region we return to the call is 8 byte +* aligned and packed against the tail of the ophdr. +*/ +void * +xlog_prepare_iovec ( +struct xfs_log_vec *lv, +struct xfs_log_iovec **vecp, +uint type) +{ +struct xfs_log_iovec *vec = *vecp; +struct xlog_op_header *oph; +uint32_t len; +void *buf; + +if (vec) { +ASSERT (vec - lv->lv_iovecp < lv->lv_niovecs); + vec++; + }else { + vec = &lv->lv_iovecp[0 ]; + } + + len = lv->lv_buf_len +sizeof (struct xlog_op_header ); +if (!IS_ALIGNED (len,sizeof (uint64_t ))) { + lv->lv_buf_len =round_up (len,sizeof (uint64_t )) - +sizeof (struct xlog_op_header ); + } + + vec->i_type = type; + vec->i_addr = lv->lv_buf + lv->lv_buf_len; + + oph = vec->i_addr; + oph->oh_clientid =XFS_TRANSACTION ; + oph->oh_res2 =0 ; + oph->oh_flags =0 ; + + buf = vec->i_addr +sizeof (struct xlog_op_header ); +ASSERT (IS_ALIGNED ((unsigned long )buf,sizeof (uint64_t ))); + + *vecp = vec; +return buf; +} + static void xlog_grant_sub_space( struct xlog *log,
@@ -2131,9 +2187,9 @@ xlog_print_trans( }/* -* Calculate the potential space needed by the log vector. If this is a start -* transaction, the caller has already accounted for both opheaders in the start -* transaction, so we don't need to account for them here. +* Calculate the potential space needed by the log vector. All regions contain +* their own opheaders and they are accounted for in region space so we don't +* need to add them to the vector length here. */ static int xlog_write_calc_vec_length(
@@ -2160,18 +2216,7 @@ xlog_write_calc_vec_length(xlog_tic_add_region (ticket, vecp->i_len, vecp->i_type); } } - -/* Don't account for regions with embedded ophdrs */ -if (optype && headers >0 ) { - headers--; -if (optype &XLOG_START_TRANS ) { -ASSERT (headers >=1 ); - headers--; - } - } - ticket->t_res_num_ophdrs += headers; - len += headers *sizeof (struct xlog_op_header );return len; }
@@ -2181,7 +2226,6 @@ xlog_write_setup_ophdr(struct xlog_op_header *ophdr, struct xlog_ticket *ticket) { - ophdr->oh_tid = cpu_to_be32(ticket->t_tid); ophdr->oh_clientid = XFS_TRANSACTION; ophdr->oh_res2 =0 ; ophdr->oh_flags =0 ;
@@ -2404,21 +2448,25 @@ xlog_write(ASSERT ((unsigned long )ptr %sizeof (int32_t ) ==0 );/* -* The XLOG_START_TRANS has embedded ophdrs for the -* start record and transaction header. They will always -* be the first two regions in the lv chain. Commit and -* unmount records also have embedded ophdrs. +* Regions always have their ophdr at the start of the +* region, except for: +* - a transaction start which has a start record ophdr +* before the first region ophdr; and +* - the previous region didn't fully fit into an iclog +* so needs a continuation ophdr to prepend the region +* in this new iclog. */ -if (optype) { - ophdr = reg->i_addr; -if (index) - optype &= ~XLOG_START_TRANS ; - }else { + ophdr = reg->i_addr; +if (optype && index) { + optype &= ~XLOG_START_TRANS ; + }else if (partial_copy) { ophdr =xlog_write_setup_ophdr (ptr, ticket);xlog_write_adv_cnt (&ptr, &len, &log_offset,sizeof (struct xlog_op_header )); added_ophdr = true; } + ophdr->oh_tid =cpu_to_be32 (ticket->t_tid); + len += xlog_write_setup_copy(ticket, ophdr, iclog->ic_size-log_offset, reg->i_len,
@@ -2436,20 +2484,11 @@ xlog_write( ophdr->oh_len =cpu_to_be32 (copy_len -sizeof (struct xlog_op_header )); } -/* -* Copy region. -* -* Commit records just log an opheader, so -* we can have empty payloads with no data region to -* copy. Hence we only copy the payload if the vector -* says it has data to copy. -*/ -ASSERT (copy_len >=0 ); -if (copy_len >0 ) { -memcpy (ptr, reg->i_addr + copy_off, copy_len); -xlog_write_adv_cnt (&ptr, &len, &log_offset, - copy_len); - } + +ASSERT (copy_len >0 ); +memcpy (ptr, reg->i_addr + copy_off, copy_len); +xlog_write_adv_cnt (&ptr, &len, &log_offset, copy_len); +if (added_ophdr) copy_len +=sizeof (struct xlog_op_header ); record_cnt++;
fs/xfs/xfs_log.h +8 -34
52 lines not on this page · raw message
fs/xfs/xfs_log_cil.c +14 -11
@@ -181,13 +181,20 @@ xlog_cil_alloc_shadow_bufs( }/* -* We 64-bit align the length of each iovec so that the start -* of the next one is naturally aligned. We'll need to -* account for that slack space here. Then round nbytes up -* to 64-bit alignment so that the initial buffer alignment is -* easy to calculate and verify. +* We 64-bit align the length of each iovec so that the start of +* the next one is naturally aligned. We'll need to account for +* that slack space here. +* +* We also add the xlog_op_header to each region when +* formatting, but that's not accounted to the size of the item +* at this point. Hence we'll need an addition number of bytes +* for each vector to hold an opheader. +* +* Then round nbytes up to 64-bit alignment so that the initial +* buffer alignment is easy to calculate and verify. */ - nbytes += niovecs *sizeof (uint64_t ); + nbytes += niovecs * + (sizeof (uint64_t ) +sizeof (struct xlog_op_header )); nbytes =round_up (nbytes,sizeof (uint64_t ));/*
@@ -433,11 +440,6 @@ xlog_cil_insert_items(spin_lock (&cil->xc_cil_lock); -/* account for space used by new iovec headers */ - iovhdr_res = diff_iovecs *sizeof (xlog_op_header_t); - len += iovhdr_res; - ctx->nvecs += diff_iovecs; -/* attach the transaction to the CIL if it has any busy extents */ if (!list_empty (&tp->t_busy))list_splice_init (&tp->t_busy, &ctx->busy_extents);
@@ -469,6 +471,7 @@ xlog_cil_insert_items( } tp->t_ticket->t_curr_res -= len; ctx->space_used += len; + ctx->nvecs += diff_iovecs;/* * If we've overrun the reservation, dump the tx details before we move
Signature · 1 line
2.31.1
PATCH v5 21/39 xfs: introduce xlog_write_single()
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Introduce an optimised version of xlog_write() that is used when the entire write will fit in a single iclog. This greatly simplifies the implementation of writing a log vector chain into an iclog, and sets the ground work for a much more understandable xlog_write() implementation.
--- fs/xfs/xfs_log.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 56 insertions(+), 1 deletion(-)
fs/xfs/xfs_log.c +56 -1
@@ -2225,6 +2225,52 @@ xlog_write_copy_finish(return error; } +/* +* Write log vectors into a single iclog which is guaranteed by the caller +* to have enough space to write the entire log vector into. Return the number +* of log vectors written into the iclog. +*/ +static int +xlog_write_single ( +struct xfs_log_vec *log_vector, +struct xlog_ticket *ticket, +struct xlog_in_core *iclog, +uint32_t log_offset, +uint32_t len) +{ +struct xfs_log_vec *lv; +void *ptr; +int index =0 ; +int record_cnt =0 ; + +ASSERT (log_offset + len <= iclog->ic_size); + + ptr = iclog->ic_datap + log_offset; +for (lv = log_vector; lv; lv = lv->lv_next) { +/* +* Ordered log vectors have no regions to write so this +* loop will naturally skip them. +*/ +for (index =0 ; index < lv->lv_niovecs; index++) { +struct xfs_log_iovec *reg = &lv->lv_iovecp[index]; +struct xlog_op_header *ophdr = reg->i_addr; + +ASSERT (reg->i_len %sizeof (int32_t ) ==0 ); +ASSERT ((unsigned long )ptr %sizeof (int32_t ) ==0 ); + + ophdr->oh_tid =cpu_to_be32 (ticket->t_tid); + ophdr->oh_len =cpu_to_be32 (reg->i_len - +sizeof (struct xlog_op_header )); +memcpy (ptr, reg->i_addr, reg->i_len); +xlog_write_adv_cnt (&ptr, &len, &log_offset, reg->i_len); + record_cnt++; + } + } +ASSERT (len ==0 ); +return record_cnt; +} + +/* * Write some region out to in-core log *
@@ -2305,16 +2351,25 @@ xlog_write(return error;ASSERT (log_offset <= iclog->ic_size -1 ); - ptr = iclog->ic_datap + log_offset;/* Start_lsn is the first lsn written to. */ if (start_lsn && !*start_lsn) *start_lsn =be64_to_cpu (iclog->ic_header.h_lsn); +/* If this is a single iclog write, go fast... */ +if (!contwr && lv == log_vector) { + record_cnt =xlog_write_single (lv, ticket, iclog, + log_offset, len); + len =0 ; + data_cnt = len; +break ; + } +/* * This loop writes out as many regions as can fit in the amount * of space which was allocated by xlog_state_get_iclog_space(). */ + ptr = iclog->ic_datap + log_offset;while (lv && (!lv->lv_niovecs || index < lv->lv_niovecs)) {struct xfs_log_iovec *reg;struct xlog_op_header *ophdr;
Signature · 1 line
2.31.1
PATCH v5 33/39 xfs: Add order IDs to log items in CIL
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Before we split the ordered CIL up into per cpu lists, we need a mechanism to track the order of the items in the CIL. We need to do this because there are rules around the order in which related items must physically appear in the log even inside a single checkpoint transaction.
An example of this is intents - an intent must appear in the log before it's intent done record so that log recovery can cancel the intent correctly. If we have these two records misordered in the CIL, then they will not be recovered correctly by journal replay.
We also will not be able to move items to the tail of the CIL list when they are relogged, hence the log items will need some mechanism to allow the correct log item order to be recreated before we write log items to the hournal.
Hence we need to have a mechanism for recording global order of transactions in the log items so that we can recover that order from un-ordered per-cpu lists.
Do this with a simple monotonic increasing commit counter in the CIL context. Each log item in the transaction gets stamped with the current commit order ID before it is added to the CIL. If the item is already in the CIL, leave it where it is instead of moving it to the tail of the list and instead sort the list before we start the push work.
--- fs/xfs/xfs_log_cil.c | 38 ++++++++++++++++++++++++++++++-------- fs/xfs/xfs_log_priv.h | 1 + fs/xfs/xfs_trans.h | 1 + 3 files changed, 32 insertions(+), 8 deletions(-)
fs/xfs/xfs_log_cil.c +30 -8
@@ -468,6 +468,7 @@ xlog_cil_insert_items(int len =0 ;int iovhdr_res =0 , split_res =0 , ctx_res =0 ;int space_used; +int order;struct xlog_cil_pcp *cilpcp;ASSERT (tp);
@@ -557,10 +558,12 @@ xlog_cil_insert_items( }/* -* Now (re-)position everything modified at the tail of the CIL. +* Now update the order of everything modified in the transaction +* and insert items into the CIL if they aren't already there. * We do this here so we only need to take the CIL lock once during * the transaction commit. */ + order =atomic_inc_return (&ctx->order_id);spin_lock (&cil->xc_cil_lock);list_for_each_entry (lip, &tp->t_items, li_trans) {
@@ -568,13 +571,10 @@ xlog_cil_insert_items(if (!test_bit (XFS_LI_DIRTY , &lip->li_flags))continue ; -/* -* Only move the item if it isn't already at the tail. This is -* to prevent a transient list_empty() state when reinserting -* an item that is already the only item in the CIL. -*/ -if (!list_is_last (&lip->li_cil, &cil->xc_cil)) -list_move_tail (&lip->li_cil, &cil->xc_cil); + lip->li_order_id = order; +if (!list_empty (&lip->li_cil)) +continue ; +list_add_tail (&lip->li_cil, &cil->xc_cil); }spin_unlock (&cil->xc_cil_lock);
@@ -787,6 +787,26 @@ xlog_cil_build_trans_hdr( tic->t_curr_res -= lvhdr->lv_bytes; } +/* +* CIL item reordering compare function. We want to order in ascending ID order, +* but we want to leave items with the same ID in the order they were added to +* the list. This is important for operations like reflink where we log 4 order +* dependent intents in a single transaction when we overwrite an existing +* shared extent with a new shared extent. i.e. BUI(unmap), CUI(drop), +* CUI (inc), BUI(remap)... +*/ +static int +xlog_cil_order_cmp ( +void *priv, +const struct list_head *a, +const struct list_head *b) +{ + struct xfs_log_item *l1 = container_of(a, struct xfs_log_item, li_cil); + struct xfs_log_item *l2 = container_of(b, struct xfs_log_item, li_cil); + +return l1->li_order_id > l2->li_order_id; +} +/* * Push the Committed Item List to the log. *
@@ -907,6 +927,7 @@ xlog_cil_push_work(* needed on the transaction commit side which is currently locked out * by the flush lock. */ +list_sort (NULL , &cil->xc_cil, xlog_cil_order_cmp); lv =NULL ;while (!list_empty (&cil->xc_cil)) {struct xfs_log_item *item;
@@ -914,6 +935,7 @@ xlog_cil_push_work( item =list_first_entry (&cil->xc_cil, struct xfs_log_item, li_cil);list_del_init (&item->li_cil); + item->li_order_id =0 ;if (!ctx->lv_chain) ctx->lv_chain = item->li_lv;else
fs/xfs/xfs_log_priv.h +1 -0
@@ -225,6 +225,7 @@ struct xfs_cil_ctx {struct list_head committing;/* ctx committing list */ struct work_struct discard_endio_work;struct work_struct push_work; +atomic_t order_id; };/*
fs/xfs/xfs_trans.h +1 -0
@@ -44,6 +44,7 @@ struct xfs_log_item {struct xfs_log_vec *li_lv;/* active log vector */ struct xfs_log_vec *li_lv_shadow;/* standby vector */ xfs_csn_t li_seq;/* CIL commit seq */ +uint32_t li_order_id;/* CIL commit order */ };/*
Signature · 1 line
2.31.1
PATCH v5 16/39 xfs: log tickets don't need log client id
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
We currently set the log ticket client ID when we reserve a transaction. This client ID is only ever written to the log by a CIL checkpoint or unmount records, and so anything using a high level transaction allocated through xfs_trans_alloc() does not need a log ticket client ID to be set.
For the CIL checkpoint, the client ID written to the journal is always XFS_TRANSACTION, and for the unmount record it is always XFS_LOG, and nothing else writes to the log. All of these operations tell xlog_write() exactly what they need to write to the log (the optype) and build their own opheaders for start, commit and unmount records. Hence we no longer need to set the client id in either the log ticket or the xfs_trans.
--- fs/xfs/libxfs/xfs_log_format.h | 1 - fs/xfs/xfs_log.c | 47 ++++++---------------------------- fs/xfs/xfs_log.h | 16 +++++------- fs/xfs/xfs_log_cil.c | 2 +- fs/xfs/xfs_log_priv.h | 10 ++------ fs/xfs/xfs_trans.c | 6 ++--- 6 files changed, 19 insertions(+), 63 deletions(-)
fs/xfs/libxfs/xfs_log_format.h +0 -1
@@ -69,7 +69,6 @@ static inline uint xlog_get_cycle(char *ptr)/* Log Clients */ #define XFS_TRANSACTION 0x69 -#define XFS_VOLUME 0x2#define XFS_LOG 0xaa#define XLOG_UNMOUNT_TYPE 0x556e/* Un for Unmount */
fs/xfs/xfs_log.c +8 -39
100 lines not on this page · raw message
fs/xfs/xfs_log.h +6 -10
@@ -117,16 +117,12 @@ int xfs_log_mount_finish(struct xfs_mount *mp);void xfs_log_mount_cancel (struct xfs_mount *);xfs_lsn_t xlog_assign_tail_lsn (struct xfs_mount *mp);xfs_lsn_t xlog_assign_tail_lsn_locked (struct xfs_mount *mp); -void xfs_log_space_wake (struct xfs_mount *mp); -int xfs_log_reserve (struct xfs_mount *mp, -int length, -int count, -struct xlog_ticket **ticket, -uint8_t clientid, -bool permanent); -int xfs_log_regrant (struct xfs_mount *mp,struct xlog_ticket *tic); -void xfs_log_unmount (struct xfs_mount *mp); -int xfs_log_force_umount (struct xfs_mount *mp,int logerror); +void xfs_log_space_wake (struct xfs_mount *mp); +int xfs_log_reserve (struct xfs_mount *mp,int length,int count, +struct xlog_ticket **ticket,bool permanent); +int xfs_log_regrant (struct xfs_mount *mp,struct xlog_ticket *tic); +void xfs_log_unmount (struct xfs_mount *mp); +int xfs_log_force_umount (struct xfs_mount *mp,int logerror);bool xfs_log_writable (struct xfs_mount *mp);struct xlog_ticket *xfs_log_ticket_get (struct xlog_ticket *ticket);
fs/xfs/xfs_log_cil.c +1 -1
@@ -37,7 +37,7 @@ xlog_cil_ticket_alloc( {struct xlog_ticket *tic; - tic =xlog_ticket_alloc (log,0 ,1 ,XFS_TRANSACTION ,0 ); + tic =xlog_ticket_alloc (log,0 ,1 ,0 );/* * set the current reservation to zero so we know to steal the basic
fs/xfs/xfs_log_priv.h +2 -8
@@ -158,7 +158,6 @@ typedef struct xlog_ticket {int t_unit_res;/* unit reservation in bytes : 4 */ char t_ocnt;/* original count : 1 */ char t_cnt;/* current count : 1 */ -char t_clientid;/* who does this belong to; : 1 */ char t_flags;/* properties of reservation : 1 */ /* reservation array fields */
@@ -465,13 +464,8 @@ extern __le32 xlog_cksum(struct xlog *log, struct xlog_rec_header *rhead, char *dp, int size);extern kmem_zone_t *xfs_log_ticket_zone; -struct xlog_ticket * -xlog_ticket_alloc ( -struct xlog *log, -int unit_bytes, -int count, -char client, -bool permanent); +struct xlog_ticket *xlog_ticket_alloc (struct xlog *log,int unit_bytes, +int count,bool permanent);static inline void xlog_write_adv_cnt (void **ptr,int *len,int *off,size_t bytes)
fs/xfs/xfs_trans.c +2 -4
@@ -194,11 +194,9 @@ xfs_trans_reserve(ASSERT (resp->tr_logflags &XFS_TRANS_PERM_LOG_RES ); error =xfs_log_regrant (mp, tp->t_ticket); }else { - error =xfs_log_reserve (mp, - resp->tr_logres, + error =xfs_log_reserve (mp, resp->tr_logres, resp->tr_logcount, - &tp->t_ticket,XFS_TRANSACTION , - permanent); + &tp->t_ticket, permanent); }if (error)
Signature · 1 line
2.31.1
PATCH v5 28/39 xfs: rework per-iclog header CIL reservation
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
For every iclog that a CIL push will use up, we need to ensure we have space reserved for the iclog header in each iclog. It is extremely difficult to do this accurately with a per-cpu counter without expensive summing of the counter in every commit. However, we know what the maximum CIL size is going to be because of the hard space limit we have, and hence we know exactly how many iclogs we are going to need to write out the CIL.
We are constrained by the requirement that small transactions only have reservation space for a single iclog header built into them. At commit time we don't know how much of the current transaction reservation is made up of iclog header reservations as calculated by xfs_log_calc_unit_res() when the ticket was reserved. As larger reservations have multiple header spaces reserved, we can steal more than one iclog header reservation at a time, but we only steal the exact number needed for the given log vector size delta.
As a result, we don't know exactly when we are going to steal iclog header reservations, nor do we know exactly how many we are going to need for a given CIL.
To make things simple, start by calculating the worst case number of iclog headers a full CIL push will require. Record this into an atomic variable in the CIL. Then add a byte counter to the log ticket that records exactly how much iclog header space has been reserved in this ticket by xfs_log_calc_unit_res(). This tells us exactly how much space we can steal from the ticket at transaction commit time.
Now, at transaction commit time, we can check if the CIL has a full iclog header reservation and, if not, steal the entire reservation the current ticket holds for iclog headers. This minimises the number of times we need to do atomic operations in the fast path, but still guarantees we get all the reservations we need.
--- fs/xfs/xfs_log.c | 9 ++++--- fs/xfs/xfs_log_cil.c | 55 +++++++++++++++++++++++++++++++++---------- fs/xfs/xfs_log_priv.h | 20 +++++++++------- 3 files changed, 59 insertions(+), 25 deletions(-)
fs/xfs/xfs_log.c +6 -3
@@ -3307,7 +3307,8 @@ xfs_log_ticket_get(static int xlog_calc_unit_res (struct xlog *log, -int unit_bytes) +int unit_bytes, +int *niclogs) {int iclog_space;uint num_headers;
@@ -3387,6 +3388,8 @@ xlog_calc_unit_res(/* roundoff padding for transaction data and one for commit record */ unit_bytes +=2 * log->l_iclog_roundoff; +if (niclogs) + *niclogs = num_headers;return unit_bytes; }
@@ -3395,7 +3398,7 @@ xfs_log_calc_unit_res( struct xfs_mount *mp, int unit_bytes) { -return xlog_calc_unit_res (mp->m_log, unit_bytes); +return xlog_calc_unit_res (mp->m_log, unit_bytes,NULL ); }/*
@@ -3413,7 +3416,7 @@ xlog_ticket_alloc( tic =kmem_cache_zalloc (xfs_log_ticket_zone,GFP_NOFS | __GFP_NOFAIL); - unit_res =xlog_calc_unit_res (log, unit_bytes); + unit_res =xlog_calc_unit_res (log, unit_bytes, &tic->t_iclog_hdrs);atomic_set (&tic->t_ref,1 ); tic->t_task = current;
fs/xfs/xfs_log_cil.c +42 -13
89 lines not on this page · raw message
fs/xfs/xfs_log_priv.h +11 -9
@@ -137,15 +137,16 @@ enum xlog_iclog_state {#define XLOG_ICL_NEED_FUA (1 << 1)/* iclog needs REQ_FUA */ typedef struct xlog_ticket { -struct list_head t_queue;/* reserve/write queue */ -struct task_struct *t_task;/* task that owns this ticket */ -xlog_tid_t t_tid;/* transaction identifier : 4 */ -atomic_t t_ref;/* ticket reference count : 4 */ -int t_curr_res;/* current reservation in bytes : 4 */ -int t_unit_res;/* unit reservation in bytes : 4 */ -char t_ocnt;/* original count : 1 */ -char t_cnt;/* current count : 1 */ -char t_flags;/* properties of reservation : 1 */ +struct list_head t_queue;/* reserve/write queue */ +struct task_struct *t_task;/* task that owns this ticket */ +xlog_tid_t t_tid;/* transaction identifier */ +atomic_t t_ref;/* ticket reference count */ +int t_curr_res;/* current reservation */ +int t_unit_res;/* unit reservation */ +char t_ocnt;/* original count */ +char t_cnt;/* current count */ +char t_flags;/* properties of reservation */ +int t_iclog_hdrs;/* iclog hdrs in t_curr_res */ }xlog_ticket_t ;/*
@@ -245,6 +246,7 @@ struct xfs_cil_ctx {struct xfs_cil {struct xlog *xc_log;unsigned long xc_flags; +atomic_t xc_iclog_hdrs;struct list_head xc_cil;spinlock_t xc_cil_lock;
Signature · 1 line
2.31.1
PATCH v5 29/39 xfs: introduce per-cpu CIL tracking structure
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
The CIL push lock is highly contended on larger machines, becoming a hard bottleneck that about 700,000 transaction commits/s on >16p machines. To address this, start moving the CIL tracking infrastructure to utilise per-CPU structures.
We need to track the space used, the amount of log reservation space reserved to write the CIL, the log items in the CIL and the busy extents that need to be completed by the CIL commit. This requires a couple of per-cpu counters, an unordered per-cpu list and a globally ordered per-cpu list.
Create a per-cpu structure to hold these and all the management interfaces needed, as well as the hooks to handle hotplug CPUs.
--- fs/xfs/xfs_log_cil.c | 107 +++++++++++++++++++++++++++++++++++++ fs/xfs/xfs_log_priv.h | 13 +++++ include/linux/cpuhotplug.h | 1 + 3 files changed, 121 insertions(+)
fs/xfs/xfs_log_cil.c +107 -0
@@ -1369,6 +1369,106 @@ xfs_log_item_in_current_chkpt(return lip->li_seq == cil->xc_ctx->sequence; } +#ifdef CONFIG_HOTPLUG_CPU +static LIST_HEAD (xlog_cil_pcp_list); +static DEFINE_SPINLOCK (xlog_cil_pcp_lock); +static bool xlog_cil_pcp_init; + +/* +* Move dead percpu state to the relevant CIL context structures. +* +* We have to lock the CIL context here to ensure that nothing is modifying +* the percpu state, either addition or removal. Both of these are done under +* the CIL context lock, so grabbing that exclusively here will ensure we can +* safely drain the cilpcp for the CPU that is dying. +*/ +static int +xlog_cil_pcp_dead ( +unsigned int cpu) +{ +struct xfs_cil *cil, *n; + +spin_lock (&xlog_cil_pcp_lock); +list_for_each_entry_safe (cil, n, &xlog_cil_pcp_list, xc_pcp_list) { +spin_unlock (&xlog_cil_pcp_lock); +down_write (&cil->xc_ctx_lock); +/* move stuff on dead CPU to context */ +up_write (&cil->xc_ctx_lock); +spin_lock (&xlog_cil_pcp_lock); + } +spin_unlock (&xlog_cil_pcp_lock); +return 0 ; +} + +static int +xlog_cil_pcp_hpadd ( +struct xfs_cil *cil) +{ +if (!xlog_cil_pcp_init) { +int ret; + + ret =cpuhp_setup_state_nocalls (CPUHP_XFS_CIL_DEAD , +"xfs/cil_pcp:dead" ,NULL , + xlog_cil_pcp_dead); +if (ret <0 ) { +xfs_warn (cil->xc_log->l_mp, +"Failed to initialise CIL hotplug, error %d. XFS is non-functional." , + ret); +ASSERT (0 ); +return -ENOMEM ; + } + xlog_cil_pcp_init = true; + } + +INIT_LIST_HEAD (&cil->xc_pcp_list); +spin_lock (&xlog_cil_pcp_lock); +list_add (&cil->xc_pcp_list, &xlog_cil_pcp_list); +spin_unlock (&xlog_cil_pcp_lock); +return 0 ; +} + +static void +xlog_cil_pcp_hpremove ( +struct xfs_cil *cil) +{ +spin_lock (&xlog_cil_pcp_lock); +list_del (&cil->xc_pcp_list); +spin_unlock (&xlog_cil_pcp_lock); +} + +#else /* !CONFIG_HOTPLUG_CPU */ +static inline void xlog_cil_pcp_hpadd (struct xfs_cil *cil) {} +static inline void xlog_cil_pcp_hpremove (struct xfs_cil *cil) {} +#endif + +static void __percpu * +xlog_cil_pcp_alloc ( +struct xfs_cil *cil) +{ +void __percpu *pcp; + + pcp = alloc_percpu(struct xlog_cil_pcp); +if (!pcp) +return NULL ; + +if (xlog_cil_pcp_hpadd (cil) <0 ) { +free_percpu (pcp); +return NULL ; + } +return pcp; +} + +static void +xlog_cil_pcp_free ( +struct xfs_cil *cil, +void __percpu *pcp) +{ +if (!pcp) +return ; +xlog_cil_pcp_hpremove (cil); +free_percpu (pcp); +} +/* * Perform initial CIL structure initialisation. */
@@ -1383,6 +1483,12 @@ xlog_cil_init(if (!cil)return -ENOMEM ; + cil->xc_pcp =xlog_cil_pcp_alloc (cil); +if (!cil->xc_pcp) { +kmem_free (cil); +return -ENOMEM ; + } +INIT_LIST_HEAD (&cil->xc_cil);INIT_LIST_HEAD (&cil->xc_committing);spin_lock_init (&cil->xc_cil_lock);
@@ -1413,6 +1519,7 @@ xlog_cil_destroy(ASSERT (list_empty (&cil->xc_cil));ASSERT (test_bit (XLOG_CIL_EMPTY , &cil->xc_flags)); +xlog_cil_pcp_free (cil, cil->xc_pcp);kmem_free (cil); }
fs/xfs/xfs_log_priv.h +13 -0
@@ -227,6 +227,14 @@ struct xfs_cil_ctx {struct work_struct push_work; }; +/* +* Per-cpu CIL tracking items +*/ +struct xlog_cil_pcp { +struct list_head busy_extents; +struct list_head log_items; +}; +/* * Committed Item List structure *
@@ -260,6 +268,11 @@ struct xfs_cil {wait_queue_head_t xc_commit_wait;xfs_csn_t xc_current_sequence;wait_queue_head_t xc_push_wait;/* background push throttle */ + +void __percpu *xc_pcp;/* percpu CIL structures */ +#ifdef CONFIG_HOTPLUG_CPU +struct list_head xc_pcp_list; +#endif }____cacheline_aligned_in_smp ;/* xc_flags bit values */
include/linux/cpuhotplug.h +1 -0
@@ -52,6 +52,7 @@ enum cpuhp_state {CPUHP_FS_BUFF_DEAD ,CPUHP_PRINTK_DEAD ,CPUHP_MM_MEMCQ_DEAD , +CPUHP_XFS_CIL_DEAD ,CPUHP_PERCPU_CNT_DEAD ,CPUHP_RADIX_DEAD , CPUHP_PAGE_ALLOC_DEAD,
Signature · 1 line
2.31.1
PATCH v5 36/39 xfs: move CIL ordering to the logvec chain
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Adding a list_sort() call to the CIL push work while the xc_ctx_lock is held exclusively has resulted in fairly long lock hold times and that stops all front end transaction commits from making progress.
We can move the sorting out of the xc_ctx_lock if we can transfer the ordering information to the log vectors as they are detached from the log items and then we can sort the log vectors. With these changes, we can move the list_sort() call to just before we call xlog_write() when we aren't holding any locks at all.
--- fs/xfs/xfs_log.h | 1 + fs/xfs/xfs_log_cil.c | 23 ++++++++++++++--------- 2 files changed, 15 insertions(+), 9 deletions(-)
fs/xfs/xfs_log.h +1 -0
@@ -10,6 +10,7 @@ struct xfs_cil_ctx;struct xfs_log_vec {struct list_head lv_list;/* CIL lv chain ptrs */ +uint32_t lv_order_id;/* chain ordering info */ int lv_niovecs;/* number of iovecs in lv */ struct xfs_log_iovec *lv_iovecp;/* iovec array */ struct xfs_log_item *lv_item;/* owner */
fs/xfs/xfs_log_cil.c +14 -9
@@ -798,10 +798,10 @@ xlog_cil_order_cmp(const struct list_head *a, const struct list_head *b) { - struct xfs_log_item *l1 = container_of(a, struct xfs_log_item, li_cil); - struct xfs_log_item *l2 = container_of(b, struct xfs_log_item, li_cil); + struct xfs_log_vec *l1 = container_of(a, struct xfs_log_vec, lv_list); + struct xfs_log_vec *l2 = container_of(b, struct xfs_log_vec, lv_list); -return l1->li_order_id > l2->li_order_id; +return l1->lv_order_id > l2->lv_order_id; }/*
@@ -918,24 +918,22 @@ xlog_cil_push_work(xlog_cil_pcp_aggregate (cil, ctx); -list_sort (NULL , &ctx->log_items, xlog_cil_order_cmp);while (!list_empty (&ctx->log_items)) {struct xfs_log_item *item; item =list_first_entry (&ctx->log_items, struct xfs_log_item, li_cil); lv = item->li_lv; -list_del_init (&item->li_cil); - item->li_order_id =0 ; - item->li_lv =NULL ; - + lv->lv_order_id = item->li_order_id; num_iovecs += lv->lv_niovecs;/* we don't write ordered log vectors */ if (lv->lv_buf_len !=XFS_LOG_VEC_ORDERED ) num_bytes += lv->lv_bytes;list_add_tail (&lv->lv_list, &ctx->lv_chain); - +list_del_init (&item->li_cil); + item->li_order_id =0 ; + item->li_lv =NULL ; }/*
@@ -968,6 +966,13 @@ xlog_cil_push_work(spin_unlock (&cil->xc_push_lock);up_write (&cil->xc_ctx_lock); +/* +* Sort the log vector chain before we add the transaction headers. +* This ensures we always have the transaction headers at the start +* of the chain. +*/ +list_sort (NULL , &ctx->lv_chain, xlog_cil_order_cmp); +/* * Build a checkpoint transaction header and write it to the log to * begin the transaction. We need to account for the space used by the
Signature · 1 line
2.31.1
PATCH v5 38/39 xfs: xlog_sync() manually adjusts grant head space
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
When xlog_sync() rounds off the tail the iclog that is being flushed, it manually subtracts that space from the grant heads. This space is actually reserved by the transaction ticket that covers the xlog_sync() call from xlog_write(), but we don't plumb the ticket down far enough for it to account for the space consumed in the current log ticket.
The grant heads are hot, so we really should be accounting this to the ticket is we can, rather than adding thousands of extra grant head updates every CIL commit.
Interestingly, this actually indicates a potential log space overrun can occur when we force the log. By the time that xfs_log_force() pushes out an active iclog and consumes the roundoff space, the reservation for that roundoff space has been returned to the grant heads and is no longer covered by a reservation. In theory the roundoff added to log force on an already full log could push the write head past the tail. In practice, the CIL commit that writes to the log and needs the iclog pushed will have reserved space for roundoff, so when it releases the ticket there will still be physical space for the roundoff to be committed to the log, even though it is no longer reserved. This roundoff won't be enough space to allow a transaction to be woken if the log is full, so overruns should not actually occur in practice.
That said, it indicates that we should not release the CIL context log ticket until after we've released the commit iclog. It also means that xlog_sync() still needs the direct grant head manipulation if we don't provide it with a ticket. Log forces are rare when we are in fast paths running 1.5 million transactions/s that make the grant heads hot, so let's optimise the hot case and pass CIL log tickets down to the xlog_sync() code.
--- fs/xfs/xfs_log.c | 39 +++++++++++++++++++++++++-------------- fs/xfs/xfs_log_cil.c | 19 ++++++++++++++----- fs/xfs/xfs_log_priv.h | 3 ++- 3 files changed, 41 insertions(+), 20 deletions(-)
fs/xfs/xfs_log.c +25 -14
@@ -55,7 +55,8 @@ xlog_grant_push_ail( STATIC voidxlog_sync (struct xlog *log, -struct xlog_in_core *iclog); +struct xlog_in_core *iclog, +struct xlog_ticket *ticket);#if defined(DEBUG ) STATIC void xlog_verify_dest_ptr(
@@ -537,7 +538,8 @@ __xlog_state_release_iclog(int xlog_state_release_iclog (struct xlog *log, -struct xlog_in_core *iclog) +struct xlog_in_core *iclog, +struct xlog_ticket *ticket) {lockdep_assert_held (&log->l_icloglock);
@@ -547,7 +549,7 @@ xlog_state_release_iclog(if (atomic_dec_and_test (&iclog->ic_refcnt) &&__xlog_state_release_iclog (log, iclog)) {spin_unlock (&log->l_icloglock); -xlog_sync (log, iclog); +xlog_sync (log, iclog, ticket);spin_lock (&log->l_icloglock); }
@@ -908,7 +910,7 @@ xlog_unmount_write(* iclog containing the unmount record is written. */ iclog->ic_flags |= (XLOG_ICL_NEED_FLUSH |XLOG_ICL_NEED_FUA ); - error =xlog_state_release_iclog (log, iclog); + error =xlog_state_release_iclog (log, iclog, tic);xlog_wait_on_iclog (iclog);if (tic) {
@@ -1939,7 +1941,8 @@ xlog_calc_iclog_size( STATIC voidxlog_sync (struct xlog *log, -struct xlog_in_core *iclog) +struct xlog_in_core *iclog, +struct xlog_ticket *ticket) {unsigned int count;/* byte count of bwrite */ unsigned int roundoff;/* roundoff to BB or stripe */
@@ -1950,12 +1953,20 @@ xlog_sync( count =xlog_calc_iclog_size (log, iclog, &roundoff); -/* move grant heads by roundoff in sync */ -xlog_grant_add_space (log, &log->l_reserve_head.grant, roundoff); -xlog_grant_add_space (log, &log->l_write_head.grant, roundoff); +/* +* If we have a ticket, account for the roundoff via the ticket +* reservation to avoid touching the hot grant heads needlessly. +* Otherwise, we have to move grant heads directly. +*/ +if (ticket) { + ticket->t_curr_res -= roundoff; + }else { +xlog_grant_add_space (log, &log->l_reserve_head.grant, roundoff); +xlog_grant_add_space (log, &log->l_write_head.grant, roundoff); + }/* put cycle number in every block */ -xlog_pack_data (log, iclog, roundoff); +xlog_pack_data (log, iclog, roundoff);/* real byte length */ size = iclog->ic_offset;
@@ -2195,7 +2206,7 @@ xlog_write_get_more_iclog_space(xlog_state_finish_copy (log, iclog, *record_cnt, *data_cnt);ASSERT (iclog->ic_state ==XLOG_STATE_WANT_SYNC || iclog->ic_state ==XLOG_STATE_IOERROR ); - error =xlog_state_release_iclog (log, iclog); + error =xlog_state_release_iclog (log, iclog, ticket);spin_unlock (&log->l_icloglock);if (error)return error;
@@ -2465,7 +2476,7 @@ xlog_write(if (commit_iclog) *commit_iclog = iclog;else - error =xlog_state_release_iclog (log, iclog); + error =xlog_state_release_iclog (log, iclog, ticket);spin_unlock (&log->l_icloglock);return error;
@@ -2923,7 +2934,7 @@ xlog_state_get_iclog_space(* reference to the iclog. */ if (!atomic_add_unless (&iclog->ic_refcnt,-1 ,1 )) - error =xlog_state_release_iclog (log, iclog); + error =xlog_state_release_iclog (log, iclog, ticket);spin_unlock (&log->l_icloglock);if (error)return error;
@@ -3151,7 +3162,7 @@ xfs_log_force(atomic_inc (&iclog->ic_refcnt); lsn =be64_to_cpu (iclog->ic_header.h_lsn);xlog_state_switch_iclogs (log, iclog,0 ); -if (xlog_state_release_iclog (log, iclog)) +if (xlog_state_release_iclog (log, iclog,NULL )) goto out_error;if (be64_to_cpu (iclog->ic_header.h_lsn) != lsn)
@@ -3244,7 +3255,7 @@ xlog_force_lsn( }atomic_inc (&iclog->ic_refcnt);xlog_state_switch_iclogs (log, iclog,0 ); -if (xlog_state_release_iclog (log, iclog)) +if (xlog_state_release_iclog (log, iclog,NULL )) goto out_error;if (log_flushed) *log_flushed =1 ;
fs/xfs/xfs_log_cil.c +14 -5
@@ -839,6 +839,7 @@ xlog_cil_push_work(struct bio bio;DECLARE_COMPLETION_ONSTACK (bdev_flush);bool push_commit_stable; +struct xlog_ticket *ticket; new_ctx =xlog_cil_ctx_alloc (); new_ctx->ticket =xlog_cil_ticket_alloc (log);
@@ -1045,12 +1046,10 @@ xlog_cil_push_work(if (error) goto out_abort_free_ticket; -xfs_log_ticket_ungrant (log, ctx->ticket); -spin_lock (&commit_iclog->ic_callback_lock);if (commit_iclog->ic_state ==XLOG_STATE_IOERROR ) {spin_unlock (&commit_iclog->ic_callback_lock); - goto out_abort; + goto out_abort_free_ticket; }ASSERT_ALWAYS (commit_iclog->ic_state ==XLOG_STATE_ACTIVE || commit_iclog->ic_state ==XLOG_STATE_WANT_SYNC );
@@ -1067,6 +1066,15 @@ xlog_cil_push_work(wake_up_all (&cil->xc_commit_wait);spin_unlock (&cil->xc_push_lock); +/* +* Pull the ticket off the ctx so we can ungrant it after releasing the +* commit_iclog. The ctx may be freed by the time we return from +* releasing the commit_iclog (i.e. checkpoint has been completed and +* callback run) so we can't reference the ctx after the call to +* xlog_state_release_iclog(). +*/ + ticket = ctx->ticket; +/* * If the checkpoint spans multiple iclogs, wait for all previous * iclogs to complete before we submit the commit_iclog. In this case,
@@ -1093,8 +1101,10 @@ xlog_cil_push_work( commit_iclog->ic_flags |=XLOG_ICL_NEED_FUA ;if (push_commit_stable && commit_iclog->ic_state ==XLOG_STATE_ACTIVE )xlog_state_switch_iclogs (log, commit_iclog,0 ); -xlog_state_release_iclog (log, commit_iclog); +xlog_state_release_iclog (log, commit_iclog, ticket);spin_unlock (&log->l_icloglock); + +xfs_log_ticket_ungrant (log, ticket);return ; out_skip:
@@ -1105,7 +1115,6 @@ xlog_cil_push_work( out_abort_free_ticket:xfs_log_ticket_ungrant (log, ctx->ticket); -out_abort:ASSERT (XLOG_FORCED_SHUTDOWN (log));xlog_cil_committed (ctx); }
fs/xfs/xfs_log_priv.h +2 -1
@@ -488,7 +488,8 @@ void xfs_log_ticket_regrant(struct xlog *log, struct xlog_ticket *ticket);void xlog_state_switch_iclogs (struct xlog *log,struct xlog_in_core *iclog,int eventual_size); -int xlog_state_release_iclog (struct xlog *log,struct xlog_in_core *iclog); +int xlog_state_release_iclog (struct xlog *xlog,struct xlog_in_core *iclog, +struct xlog_ticket *ticket);/* * When we crack an atomic LSN, we sample it first so that the value will not
Signature · 1 line
2.31.1
PATCH v5 39/39 xfs: expanding delayed logging design with background material
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
I wrote up a description of how transactions, space reservations and relogging work together in response to a question for background material on the delayed logging design. Add this to the existing document for ease of future reference.
--- .../xfs-delayed-logging-design.rst | 361 ++++++++++++++++-- 1 file changed, 322 insertions(+), 39 deletions(-)
Documentation/filesystems/xfs-delayed-logging-design.rst +322 -39
@@ -1,29 +1,314 @@ .. SPDX-License-Identifier: GPL-2.0 -========================== -XFS Delayed Logging Design -========================== - -Introduction to Re-logging in XFS -================================= - -XFS logging is a combination of logical and physical logging. Some objects, -such as inodes and dquots, are logged in logical format where the details -logged are made up of the changes to in-core structures rather than on-disk -structures. Other objects - typically buffers - have their physical changes -logged. The reason for these differences is to reduce the amount of log space -required for objects that are frequently logged. Some parts of inodes are more -frequently logged than others, and inodes are typically more frequently logged -than any other object (except maybe the superblock buffer) so keeping the -amount of metadata logged low is of prime importance. - -The reason that this is such a concern is that XFS allows multiple separate -modifications to a single object to be carried in the log at any given time. -This allows the log to avoid needing to flush each change to disk before -recording a new change to the object. XFS does this via a method called -"re-logging". Conceptually, this is quite simple - all it requires is that any -new change to the object is recorded with a *new copy* of all the existing -changes in the new transaction that is written to the log. +================== +XFS Logging Design +================== + +Preamble +======== + +This document describes the design and algorithms that the XFS journalling +subsystem is based on. This document describes the design and algorithms that +the XFS journalling subsystem is based on so that readers may familiarize +themselves with the general concepts of how transaction processing in XFS works. + +We begin with an overview of transactions in XFS, followed by describing how +transaction reservations are structured and accounted, and then move into how we +guarantee forwards progress for long running transactions with finite initial +reservations bounds. At this point we need to explain how relogging works. With +the basic concepts covered, the design of the delayed logging mechanism is +documented. + + +Introduction +============ + +XFS uses Write Ahead Logging for ensuring changes to the filesystem metadata +are atomic and recoverable. For reasons of space and time efficiency, the +logging mechanisms are varied and complex, combining intents, logical and +physical logging mechanisms to provide the necessary recovery guarantees the +filesystem requires. + +Some objects, such as inodes and dquots, are logged in logical format where the +details logged are made up of the changes to in-core structures rather than +on-disk structures. Other objects - typically buffers - have their physical +changes logged. Long running atomic modifications have individual changes +chained together by intents, ensuring that journal recovery can restart and +finish an operation that was only partially done when the system stopped +functioning. + +The reason for these differences is to keep the amount of log space and CPU time +required to process objects being modified as small as possible and hence the +logging overhead as low as possible. Some items are very frequently modified, +and some parts of objects are more frequently modified than others, so keeping +the overhead of metadata logging low is of prime importance. + +The method used to log an item or chain modifications together isn't +particularly important in the scope of this document. It suffices to know that +the method used for logging a particular object or chaining modifications +together are different and are dependent on the object and/or modification being +performed. The logging subsystem only cares that certain specific rules are +followed to guarantee forwards progress and prevent deadlocks. + + +Transactions in XFS +=================== + +XFS has two types of high level transactions, defined by the type of log space +reservation they take. These are known as "one shot" and "permanent" +transactions. Permanent transaction reservations can take reservations that span +commit boundaries, whilst "one shot" transactions are for a single atomic +modification. + +The type and size of reservation must be matched to the modification taking +place. This means that permanent transactions can be used for one-shot +modifications, but one-shot reservations cannot be used for permanent +transactions. + +In the code, a one-shot transaction pattern looks somewhat like this:: + + tp = xfs_trans_alloc(<reservation>) + <lock items> + <join item to transaction> + <do modification> + xfs_trans_commit(tp); + +As items are modified in the transaction, the dirty regions in those items are +tracked via the transaction handle. Once the transaction is committed, all +resources joined to it are released, along with the remaining unused reservation +space that was taken at the transaction allocation time. + +In contrast, a permanent transaction is made up of multiple linked individual +transactions, and the pattern looks like this:: + + tp = xfs_trans_alloc(<reservation>) + xfs_ilock(ip, XFS_ILOCK_EXCL) + + loop { + xfs_trans_ijoin(tp, 0); + <do modification> + xfs_trans_log_inode(tp, ip); + xfs_trans_roll(&tp); + } + + xfs_trans_commit(tp); + xfs_iunlock(ip, XFS_ILOCK_EXCL); + +While this might look similar to a one-shot transaction, there is an important +difference: xfs_trans_roll() performs a specific operation that links two +transactions together:: + + ntp = xfs_trans_dup(tp); + xfs_trans_commit(tp); + xfs_log_reserve(ntp); + +This results in a series of "rolling transactions" where the inode is locked +across the entire chain of transactions. Hence while this series of rolling +transactions is running, nothing else can read from or write to the inode and +this provides a mechanism for complex changes to appear atomic from an external +observer's point of view. + +It is important to note that a series of rolling transactions in a permanent +transaction does not form an atomic change in the journal. While each +individual modification is atomic, the chain is *not atomic*. If we crash half +way through, then recovery will only replay up to the last transactional +modification the loop made that was committed to the journal. + +This affects long running permanent transactions in that it is not possible to +predict how much of a long running operation will actually be recovered because +there is no guarantee of how much of the operation reached stale storage. Hence +if a long running operation requires multiple transactions to fully complete, +the high level operation must use intents and deferred operations to guarantee +recovery can complete the operation once the first transactions is persisted in +the on-disk journal. + + +Transactions are Asynchronous +============================= + +In XFS, all high level transactions are asynchronous by default. This means that +xfs_trans_commit() does not guarantee that the modification has been committed +to stable storage when it returns. Hence when a system crashes, not all the +completed transactions will be replayed during recovery. + +However, the logging subsystem does provide global ordering guarantees, such +that if a specific change is seen after recovery, all metadata modifications +that were committed prior to that change will also be seen. + +For single shot operations that need to reach stable storage immediately, or +ensuring that a long running permanent transaction is fully committed once it is +complete, we can explicitly tag a transaction as synchronous. This will trigger +a "log force" to flush the outstanding committed transactions to stable storage +in the journal and wait for that to complete. + +Synchronous transactions are rarely used, however, because they limit logging +throughput to the IO latency limitations of the underlying storage. Instead, we +tend to use log forces to ensure modifications are on stable storage only when +a user operation requires a synchronisation point to occur (e.g. fsync). + + +Transaction Reservations +======================== + +It has been mentioned a number of times now that the logging subsystem needs to +provide a forwards progress guarantee so that no modification ever stalls +because it can't be written to the journal due to a lack of space in the +journal. This is achieved by the transaction reservations that are made when +a transaction is first allocated. For permanent transactions, these reservations +are maintained as part of the transaction rolling mechanism. + +A transaction reservation provides a guarantee that there is physical log space +available to write the modification into the journal before we start making +modifications to objects and items. As such, the reservation needs to be large +enough to take into account the amount of metadata that the change might need to +log in the worst case. This means that if we are modifying a btree in the +transaction, we have to reserve enough space to record a full leaf-to-root split +of the btree. As such, the reservations are quite complex because we have to +take into account all the hidden changes that might occur. + +For example, a user data extent allocation involves allocating an extent from +free space, which modifies the free space trees. That's two btrees. Inserting +the extent into the inode's extent map might require a split of the extent map +btree, which requires another allocation that can modify the free space trees +again. Then we might have to update reverse mappings, which modifies yet +another btree which might require more space. And so on. Hence the amount of +metadata that a "simple" operation can modify can be quite large. + +This "worst case" calculation provides us with the static "unit reservation" +for the transaction that is calculated at mount time. We must guarantee that the +log has this much space available before the transaction is allowed to proceed +so that when we come to write the dirty metadata into the log we don't run out +of log space half way through the write. + +For one-shot transactions, a single unit space reservation is all that is +required for the transaction to proceed. For permanent transactions, however, we +also have a "log count" that affects the size of the reservation that is to be +made. + +While a permanent transaction can get by with a single unit of space +reservation, it is somewhat inefficient to do this as it requires the +transaction rolling mechanism to re-reserve space on every transaction roll. We +know from the implementation of the permanent transactions how many transaction +rolls are likely for the common modifications that need to be made. + +For example, and inode allocation is typically two transactions - one to +physically allocate a free inode chunk on disk, and another to allocate an inode +from an inode chunk that has free inodes in it. Hence for an inode allocation +transaction, we might set the reservation log count to a value of 2 to indicate +that the common/fast path transaction will commit two linked transactions in a +chain. Each time a permanent transaction rolls, it consumes an entire unit +reservation. + +Hence when the permanent transaction is first allocated, the log space +reservation is increases from a single unit reservation to multiple unit +reservations. That multiple is defined by the reservation log count, and this +means we can roll the transaction multiple times before we have to re-reserve +log space when we roll the transaction. This ensures that the common +modifications we make only need to reserve log space once. + +If the log count for a permanent transaction reaches zero, then it needs to +re-reserve physical space in the log. This is somewhat complex, and requires +an understanding of how the log accounts for space that has been reserved. + + +Log Space Accounting +==================== + +The position in the log is typically referred to as a Log Sequence Number (LSN). +The log is circular, so the positions in the log are defined by the combination +of a cycle number - the number of times the log has been overwritten - and the +offset into the log. A LSN carries the cycle in the upper 32 bits and the +offset in the lower 32 bits. The offset is in units of "basic blocks" (512 +bytes). Hence we can do realtively simple LSN based math to keep track of +available space in the log. + +Log space accounting is done via a pair of constructs called "grant heads". The +position of the grant heads is an absolute value, so the amount of space +available in the log is defined by the distance between the position of the +grant head and the current log tail. That is, how much space can be +reserved/consumed before the grant heads would fully wrap the log and overtake +the tail position. + +The first grant head is the "reserve" head. This tracks the byte count of the +reservations currently held by active transactions. It is a purely in-memory +accounting of the space reservation and, as such, actually tracks byte offsets +into the log rather than basic blocks. Hence it technically isn't using LSNs to +represent the log position, but it is still treated like a split {cycle,offset} +tuple for the purposes of tracking reservation space. + +The reserve grant head is used to accurately account for exact transaction +reservations amounts and the exact byte count that modifications actually make +and need to write into the log. The reserve head is used to prevent new +transactions from taking new reservations when the head reaches the current +tail. It will block new reservations in a FIFO queue and as the log tail moves +forward it will wake them in order once sufficient space is available. This FIFO +mechanism ensures no transaction is starved of resources when log space +shortages occur. + +The other grant head is the "write" head. Unlike the reserve head, this grant +head contains an LSN and it tracks the physical space usage in the log. While +this might sound like it is accounting the same state as the reserve grant head +- and it mostly does track exactly the same location as the reserve grant head - +there are critical differences in behaviour between them that provides the +forwards progress guarantees that rolling permanent transactions require. + +These differences when a permanent transaction is rolled and the internal "log +count" reaches zero and the initial set of unit reservations have been +exhausted. At this point, we still require a log space reservation to continue +the next transaction in the sequeunce, but we have none remaining. We cannot +sleep during the transaction commit process waiting for new log space to become +available, as we may end up on the end of the FIFO queue and the items we have +locked while we sleep could end up pinning the tail of the log before there is +enough free space in the log to fulfil all of the pending reservations and +then wake up transaction commit in progress. + +To take a new reservation without sleeping requires us to be able to take a +reservation even if there is no reservation space currently available. That is, +we need to be able to *overcommit* the log reservation space. As has already +been detailed, we cannot overcommit physical log space. However, the reserve +grant head does not track physical space - it only accounts for the amount of +reservations we currently have outstanding. Hence if the reserve head passes +over the tail of the log all it means is that new reservations will be throttled +immediately and remain throttled until the log tail is moved forward far enough +to remove the overcommit and start taking new reservations. In other words, we +can overcommit the reserve head without violating the physical log head and tail +rules. + +As a result, permanent transactions only "regrant" reservation space during +xfs_trans_commit() calls, while the physical log space reservation - tracked by +the write head - is then reserved separately by a call to xfs_log_reserve() +after the commit completes. Once the commit completes, we can sleep waiting for +physical log space to be reserved from the write grant head, but only if one +critical rule has been observed:: + + Code using permanent reservations must always log the items they hold + locked across each transaction they roll in the chain. + +"Re-logging" the locked items on every transaction roll ensures that the items +attached to the transaction chain being rolled are always relocated to the +physical head of the log and so do not pin the tail of the log. If a locked item +pins the tail of the log when we sleep on the write reservation, then we will +deadlock the log as we cannot take the locks needed to write back that item and +move the tail of the log forwards to free up write grant space. Re-logging the +locked items avoids this deadlock and guarantees that the log reservation we are +making cannot self-deadlock. + +If all rolling transactions obey this rule, then they can all make forwards +progress independently because nothing will block the progress of the log +tail moving forwards and hence ensuring that write grant space is always +(eventually) made available to permanent transactions no matter how many times +they roll. + + +Re-logging Explained +==================== + +XFS allows multiple separate modifications to a single object to be carried in +the log at any given time. This allows the log to avoid needing to flush each +change to disk before recording a new change to the object. XFS does this via a +method called "re-logging". Conceptually, this is quite simple - all it requires +is that any new change to the object is recorded with a *new copy* of all the +existing changes in the new transaction that is written to the log. That is, if we have a sequence of changes A through to F, and the object was written to disk after change D, we would see in the log the following series
@@ -42,16 +327,13 @@ transaction:: In other words, each time an object is relogged, the new transaction contains the aggregation of all the previous changes currently held only in the log. -This relogging technique also allows objects to be moved forward in the log so -that an object being relogged does not prevent the tail of the log from ever -moving forward. This can be seen in the table above by the changing -(increasing) LSN of each subsequent transaction - the LSN is effectively a -direct encoding of the location in the log of the transaction. +This relogging technique allows objects to be moved forward in the log so that +an object being relogged does not prevent the tail of the log from ever moving +forward. This can be seen in the table above by the changing (increasing) LSN +of each subsequent transaction, and it's the technique that allows us to +implement long-running, multiple-commit permanent transactions. -This relogging is also used to implement long-running, multiple-commit -transactions. These transaction are known as rolling transactions, and require -a special log reservation known as a permanent transaction reservation. A -typical example of a rolling transaction is the removal of extents from an +A typical example of a rolling transaction is the removal of extents from an inode which can only be done at a rate of two extents per transaction because of reservation size limitations. Hence a rolling extent removal transaction keeps relogging the inode and btree buffers as they get modified in each
@@ -67,12 +349,13 @@ the log over and over again. Worse is the fact that objects tend to get dirtier as they get relogged, so each subsequent transaction is writing more metadata into the log. -Another feature of the XFS transaction subsystem is that most transactions are -asynchronous. That is, they don't commit to disk until either a log buffer is -filled (a log buffer can hold multiple transactions) or a synchronous operation -forces the log buffers holding the transactions to disk. This means that XFS is -doing aggregation of transactions in memory - batching them, if you like - to -minimise the impact of the log IO on transaction throughput. +It should now also be obvious how relogging and asynchronous transactions go +hand in hand. That is, transactions don't get written to the physical journal +until either a log buffer is filled (a log buffer can hold multiple +transactions) or a synchronous operation forces the log buffers holding the +transactions to disk. This means that XFS is doing aggregation of transactions +in memory - batching them, if you like - to minimise the impact of the log IO on +transaction throughput. The limitation on asynchronous transaction throughput is the number and size of log buffers made available by the log manager. By default there are 8 log
Signature · 1 line
2.31.1
PATCH v5 26/39 xfs: use the CIL space used counter for emptiness checks
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
In the next patches we are going to make the CIL list itself per-cpu, and so we cannot use list_empty() to check is the list is empty. Replace the list_empty() checks with a flag in the CIL to indicate we have committed at least one transaction to the CIL and hence the CIL is not empty.
We need this flag to be an atomic so that we can clear it without holding any locks in the commit fast path, but we also need to be careful to avoid atomic operations in the fast path. Hence we use the fact that test_bit() is not an atomic op to first check if the flag is set and then run the atomic test_and_clear_bit() operation to clear it and steal the initial unit reservation for the CIL context checkpoint.
When we are switching to a new context in a push, we place the setting of the XLOG_CIL_EMPTY flag under the xc_push_lock. THis allows all the other places that need to check whether the CIL is empty to use test_bit() and still be serialised correctly with the CIL context swaps that set the bit.
--- fs/xfs/xfs_log_cil.c | 45 ++++++++++++++++++++++++------------------- fs/xfs/xfs_log_priv.h | 4 ++++ 2 files changed, 29 insertions(+), 20 deletions(-)
fs/xfs/xfs_log_cil.c +25 -20
@@ -70,6 +70,7 @@ xlog_cil_ctx_switch(struct xfs_cil *cil, struct xfs_cil_ctx *ctx) { + set_bit(XLOG_CIL_EMPTY, &cil->xc_flags); ctx->sequence = ++cil->xc_current_sequence; ctx->cil = cil; cil->xc_ctx = ctx;
@@ -436,13 +437,12 @@ xlog_cil_insert_items(list_splice_init (&tp->t_busy, &ctx->busy_extents);/* -* Now transfer enough transaction reservation to the context ticket -* for the checkpoint. The context ticket is special - the unit -* reservation has to grow as well as the current reservation as we -* steal from tickets so we can correctly determine the space used -* during the transaction commit. +* We need to take the CIL checkpoint unit reservation on the first +* commit into the CIL. Test the XLOG_CIL_EMPTY bit first so we don't +* unnecessarily do an atomic op in the fast path here. */ -if (ctx->ticket->t_curr_res ==0 ) { +if (test_bit (XLOG_CIL_EMPTY , &cil->xc_flags) && +test_and_clear_bit (XLOG_CIL_EMPTY , &cil->xc_flags)) { ctx_res = ctx->ticket->t_unit_res; ctx->ticket->t_curr_res = ctx_res; tp->t_ticket->t_curr_res -= ctx_res;
@@ -771,7 +771,7 @@ xlog_cil_push_work(* move on to a new sequence number and so we have to be able to push * this sequence again later. */ -if (list_empty (&cil->xc_cil)) { +if (test_bit (XLOG_CIL_EMPTY , &cil->xc_flags)) { cil->xc_push_seq =0 ;spin_unlock (&cil->xc_push_lock); goto out_skip;
@@ -1019,9 +1019,10 @@ xlog_cil_push_background(/* * The cil won't be empty because we are called while holding the -* context lock so whatever we added to the CIL will still be there +* context lock so whatever we added to the CIL will still be there. */ ASSERT (!list_empty (&cil->xc_cil)); +ASSERT (!test_bit (XLOG_CIL_EMPTY , &cil->xc_flags));/* * Don't do a background push if we haven't used up all the
@@ -1108,7 +1109,8 @@ xlog_cil_push_now(* there's no work we need to do. */ spin_lock (&cil->xc_push_lock); -if (list_empty (&cil->xc_cil) || push_seq <= cil->xc_push_seq) { +if (test_bit (XLOG_CIL_EMPTY , &cil->xc_flags) || + push_seq <= cil->xc_push_seq) {spin_unlock (&cil->xc_push_lock);return ; }
@@ -1127,7 +1129,7 @@ xlog_cil_empty(bool empty = false;spin_lock (&cil->xc_push_lock); -if (list_empty (&cil->xc_cil)) +if (test_bit (XLOG_CIL_EMPTY , &cil->xc_flags)) empty = true;spin_unlock (&cil->xc_push_lock);return empty;
@@ -1295,7 +1297,7 @@ xlog_cil_force_seq(* we would have found the context on the committing list. */ if (sequence == cil->xc_current_sequence && - !list_empty (&cil->xc_cil)) { + !test_bit (XLOG_CIL_EMPTY , &cil->xc_flags)) {spin_unlock (&cil->xc_push_lock); goto restart; }
@@ -1328,9 +1330,9 @@ boolxfs_log_item_in_current_chkpt ( struct xfs_log_item *lip) { -struct xfs_cil_ctx *ctx = lip->li_mountp->m_log->l_cilp->xc_ctx; +struct xfs_cil *cil = lip->li_mountp->m_log->l_cilp; -if (list_empty (&lip->li_cil)) +if (test_bit (XLOG_CIL_EMPTY , &cil->xc_flags))return false;/*
@@ -1338,7 +1340,7 @@ xfs_log_item_in_current_chkpt(* first checkpoint it is written to. Hence if it is different to the * current sequence, we're in a new checkpoint. */ -return lip->li_seq == ctx->sequence; +return lip->li_seq == cil->xc_ctx->sequence; }/*
@@ -1375,13 +1377,16 @@ voidxlog_cil_destroy ( struct xlog *log) { -if (log->l_cilp->xc_ctx) { -if (log->l_cilp->xc_ctx->ticket) -xfs_log_ticket_put (log->l_cilp->xc_ctx->ticket); -kmem_free (log->l_cilp->xc_ctx); +struct xfs_cil *cil = log->l_cilp; + +if (cil->xc_ctx) { +if (cil->xc_ctx->ticket) +xfs_log_ticket_put (cil->xc_ctx->ticket); +kmem_free (cil->xc_ctx); } -ASSERT (list_empty (&log->l_cilp->xc_cil)); -kmem_free (log->l_cilp); +ASSERT (list_empty (&cil->xc_cil)); +ASSERT (test_bit (XLOG_CIL_EMPTY , &cil->xc_flags)); +kmem_free (cil); }
fs/xfs/xfs_log_priv.h +4 -0
@@ -244,6 +244,7 @@ struct xfs_cil_ctx {*/ struct xfs_cil {struct xlog *xc_log; +unsigned long xc_flags;struct list_head xc_cil;spinlock_t xc_cil_lock;
@@ -259,6 +260,9 @@ struct xfs_cil {wait_queue_head_t xc_push_wait;/* background push throttle */ }____cacheline_aligned_in_smp ; +/* xc_flags bit values */ +#define XLOG_CIL_EMPTY 1 +/* * The amount of log space we allow the CIL to aggregate is difficult to size. * Whatever we choose, we have to make sure we can get a reservation for the
Signature · 1 line
2.31.1
PATCH v5 30/39 xfs: implement percpu cil space used calculation
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Now that we have the CIL percpu structures in place, implement the space used counter with a fast sum check similar to the percpu_counter infrastructure.
--- fs/xfs/xfs_log_cil.c | 67 ++++++++++++++++++++++++++++++++++++++----- fs/xfs/xfs_log_priv.h | 3 +- 2 files changed, 62 insertions(+), 8 deletions(-)
fs/xfs/xfs_log_cil.c +60 -7
@@ -76,6 +76,30 @@ xlog_cil_ctx_alloc(void)return ctx; } +/* +* Aggregate the CIL per cpu structures into global counts, lists, etc and +* clear the percpu state ready for the next context to use. +*/ +static void +xlog_cil_pcp_aggregate ( +struct xfs_cil *cil, +struct xfs_cil_ctx *ctx) +{ +struct xlog_cil_pcp *cilpcp; +int cpu; + +for_each_online_cpu (cpu) { + cilpcp =per_cpu_ptr (cil->xc_pcp, cpu); + +/* +* We're in the middle of switching cil contexts. Reset the +* counter we use to detect when the current context is nearing +* full. +*/ + cilpcp->space_used =0 ; + } +} + static void xlog_cil_ctx_switch( struct xfs_cil *cil,
@@ -433,6 +457,8 @@ xlog_cil_insert_items(struct xfs_log_item *lip;int len =0 ;int iovhdr_res =0 , split_res =0 , ctx_res =0 ; +int space_used; +struct xlog_cil_pcp *cilpcp;ASSERT (tp);
@@ -469,8 +495,9 @@ xlog_cil_insert_items(* * This can steal more than we need, but that's OK. */ + space_used =atomic_read (&ctx->space_used);if (atomic_read (&cil->xc_iclog_hdrs) >0 || - ctx->space_used + len >=XLOG_CIL_BLOCKING_SPACE_LIMIT (log)) { + space_used + len >=XLOG_CIL_BLOCKING_SPACE_LIMIT (log)) {int split_res = log->l_iclog_hsize +sizeof (struct xlog_op_header );if (ctx_res)
@@ -480,16 +507,34 @@ xlog_cil_insert_items(atomic_sub (tp->t_ticket->t_iclog_hdrs, &cil->xc_iclog_hdrs); } +/* +* Update the CIL percpu pointer. This updates the global counter when +* over the percpu batch size or when the CIL is over the space limit. +* This means low lock overhead for normal updates, and when over the +* limit the space used is immediately accounted. This makes enforcing +* the hard limit much more accurate. The per cpu fold threshold is +* based on how close we are to the hard limit. +*/ + cilpcp =get_cpu_ptr (cil->xc_pcp); + cilpcp->space_used += len; +if (space_used >=XLOG_CIL_SPACE_LIMIT (log) || + cilpcp->space_used > + ((XLOG_CIL_BLOCKING_SPACE_LIMIT (log) - space_used) / +num_online_cpus ())) { +atomic_add (cilpcp->space_used, &ctx->space_used); + cilpcp->space_used =0 ; + } +put_cpu_ptr (cilpcp); +spin_lock (&cil->xc_cil_lock); - tp->t_ticket->t_curr_res -= ctx_res + len; ctx->ticket->t_unit_res += ctx_res; ctx->ticket->t_curr_res += ctx_res; - ctx->space_used += len;/* * If we've overrun the reservation, dump the tx details before we move * the log items. Shutdown is imminent... */ + tp->t_ticket->t_curr_res -= ctx_res + len;if (WARN_ON (tp->t_ticket->t_curr_res <0 )) {xfs_warn (log->l_mp,"Transaction log reservation overrun:" ); xfs_warn(log->l_mp,
@@ -846,6 +891,8 @@ xlog_cil_push_work(xfs_flush_bdev_async (&bio, log->l_mp->m_ddev_targp->bt_bdev, &bdev_flush); +xlog_cil_pcp_aggregate (cil, ctx); +/* * Pull all the log vectors off the items in the CIL, and remove the * items from the CIL. We don't need the CIL lock here because it's only
@@ -1042,6 +1089,7 @@ xlog_cil_push_background( struct xlog *log) __releases(cil->xc_ctx_lock) {struct xfs_cil *cil = log->l_cilp; +int space_used =atomic_read (&cil->xc_ctx->space_used);/* * The cil won't be empty because we are called while holding the
@@ -1054,7 +1102,7 @@ xlog_cil_push_background(* Don't do a background push if we haven't used up all the * space available yet. */ -if (cil->xc_ctx->space_used <XLOG_CIL_SPACE_LIMIT (log)) { +if (space_used <XLOG_CIL_SPACE_LIMIT (log)) {up_read (&cil->xc_ctx_lock);return ; }
@@ -1083,10 +1131,10 @@ xlog_cil_push_background(* The ctx->xc_push_lock provides the serialisation necessary for safely * using the lockless waitqueue_active() check in this context. */ -if (cil->xc_ctx->space_used >=XLOG_CIL_BLOCKING_SPACE_LIMIT (log) || +if (space_used >=XLOG_CIL_BLOCKING_SPACE_LIMIT (log) ||waitqueue_active (&cil->xc_push_wait)) {trace_xfs_log_cil_wait (log, cil->xc_ctx->ticket); -ASSERT (cil->xc_ctx->space_used < log->l_logsize); +ASSERT (space_used < log->l_logsize);xlog_wait (&cil->xc_push_wait, &cil->xc_push_lock);return ; }
@@ -1390,9 +1438,14 @@ xlog_cil_pcp_dead(spin_lock (&xlog_cil_pcp_lock);list_for_each_entry_safe (cil, n, &xlog_cil_pcp_list, xc_pcp_list) { +struct xlog_cil_pcp *cilpcp =per_cpu_ptr (cil->xc_pcp, cpu); +spin_unlock (&xlog_cil_pcp_lock);down_write (&cil->xc_ctx_lock); -/* move stuff on dead CPU to context */ + +atomic_add (cilpcp->space_used, &cil->xc_ctx->space_used); + cilpcp->space_used =0 ; +up_write (&cil->xc_ctx_lock);spin_lock (&xlog_cil_pcp_lock); }
fs/xfs/xfs_log_priv.h +2 -1
@@ -218,7 +218,7 @@ struct xfs_cil_ctx {xfs_lsn_t start_lsn;/* first LSN of chkpt commit */ xfs_lsn_t commit_lsn;/* chkpt commit record lsn */ struct xlog_ticket *ticket;/* chkpt ticket */ -int space_used;/* aggregate size of regions */ +atomic_t space_used;/* aggregate size of regions */ struct list_head busy_extents;/* busy extents in chkpt */ struct xfs_log_vec *lv_chain;/* logvecs being pushed */ struct list_head iclog_entry;
@@ -231,6 +231,7 @@ struct xfs_cil_ctx {* Per-cpu CIL tracking items */ struct xlog_cil_pcp { +uint32_t space_used;struct list_head busy_extents;struct list_head log_items; };
Signature · 1 line
2.31.1
PATCH v5 24/39 xfs: xlog_write() doesn't need optype anymore
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
So remove it from the interface and callers.
--- fs/xfs/xfs_log.c | 14 ++++---------- fs/xfs/xfs_log_cil.c | 2 +- fs/xfs/xfs_log_priv.h | 2 +- 3 files changed, 6 insertions(+), 12 deletions(-)
fs/xfs/xfs_log.c +4 -10
@@ -863,8 +863,7 @@ xlog_write_unmount_record(*/ if (log->l_targ != log->l_mp->m_ddev_targp)blkdev_issue_flush (log->l_targ->bt_bdev); -return xlog_write (log, &vec, ticket,NULL ,NULL ,XLOG_UNMOUNT_TRANS , - reg.i_len); +return xlog_write (log, &vec, ticket,NULL ,NULL , reg.i_len); }/*
@@ -1588,8 +1587,7 @@ xlog_commit_record(/* account for space used by record data */ ticket->t_curr_res -= reg.i_len; - error =xlog_write (log, &vec, ticket, lsn, iclog,XLOG_COMMIT_TRANS , - reg.i_len); + error =xlog_write (log, &vec, ticket, lsn, iclog, reg.i_len);if (error)xfs_force_shutdown (log->l_mp,SHUTDOWN_LOG_IO_ERROR );return error;
@@ -2399,7 +2397,6 @@ xlog_write(struct xlog_ticket *ticket, xfs_lsn_t *start_lsn, struct xlog_in_core **commit_iclog, - uint optype, uint32_t len) { struct xlog_in_core *iclog = NULL;
@@ -2431,7 +2428,6 @@ xlog_write(if (!lv)break ; -ASSERT (!(optype & (XLOG_COMMIT_TRANS |XLOG_UNMOUNT_TRANS ))); lv =xlog_write_partial (log, lv, ticket, &iclog, &log_offset, &len, &record_cnt, &data_cnt);if (IS_ERR_OR_NULL (lv)) {
@@ -2449,12 +2445,10 @@ xlog_write(*/ spin_lock (&log->l_icloglock);xlog_state_finish_copy (log, iclog, record_cnt,0 ); -if (commit_iclog) { -ASSERT (optype &XLOG_COMMIT_TRANS ); +if (commit_iclog) *commit_iclog = iclog; - }else { +else error =xlog_state_release_iclog (log, iclog); - }spin_unlock (&log->l_icloglock);return error;
fs/xfs/xfs_log_cil.c +1 -1
@@ -907,7 +907,7 @@ xlog_cil_push_work(* write head. */ error =xlog_write (log, &lvhdr, ctx->ticket, &ctx->start_lsn,NULL , -XLOG_START_TRANS , num_bytes); + num_bytes);if (error) goto out_abort_free_ticket;
fs/xfs/xfs_log_priv.h +1 -1
@@ -459,7 +459,7 @@ void xlog_print_tic_res(struct xfs_mount *mp, struct xlog_ticket *ticket);void xlog_print_trans (struct xfs_trans *);int xlog_write (struct xlog *log,struct xfs_log_vec *log_vector,struct xlog_ticket *tic,xfs_lsn_t *start_lsn, -struct xlog_in_core **commit_iclog,uint optype,uint32_t len); +struct xlog_in_core **commit_iclog,uint32_t len);int xlog_commit_record (struct xlog *log,struct xlog_ticket *ticket,struct xlog_in_core **iclog,xfs_lsn_t *lsn);
Signature · 1 line
2.31.1
PATCH v5 5/39 xfs: CIL checkpoint flushes caches unconditionally
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Currently every journal IO is issued as REQ_PREFLUSH | REQ_FUA to guarantee the ordering requirements the journal has w.r.t. metadata writeback. THe two ordering constraints are:
1. we cannot overwrite metadata in the journal until we guarantee that the dirty metadata has been written back in place and is stable.
2. we cannot write back dirty metadata until it has been written to the journal and guaranteed to be stable (and hence recoverable) in the journal.
These rules apply to the atomic transactions recorded in the journal, not to the journal IO itself. Hence we need to ensure metadata is stable before we start writing a new transaction to the journal (guarantee #1), and we need to ensure the entire transaction is stable in the journal before we start metadata writeback (guarantee #2).
The ordering guarantees of #1 are currently provided by REQ_PREFLUSH being added to every iclog IO. This causes the journal IO to issue a cache flush and wait for it to complete before issuing the write IO to the journal. Hence all completed metadata IO is guaranteed to be stable before the journal overwrites the old metadata.
However, for long running CIL checkpoints that might do a thousand journal IOs, we don't need every single one of these iclog IOs to issue a cache flush - the cache flush done before the first iclog is submitted is sufficient to cover the entire range in the log that the checkpoint will overwrite because the CIL space reservation guarantees the tail of the log (completed metadata) is already beyond the range of the checkpoint write.
Hence we only need a full cache flush between closing off the CIL checkpoint context (i.e. when the push switches it out) and issuing the first journal IO. Rather than plumbing this through to the journal IO, we can start this cache flush the moment the CIL context is owned exclusively by the push worker. The cache flush can be in progress while we process the CIL ready for writing, hence reducing the latency of the initial iclog write. This is especially true for large checkpoints, where we might have to process hundreds of thousands of log vectors before we issue the first iclog write. In these cases, it is likely the cache flush has already been completed by the time we have built the CIL log vector chain.
--- fs/xfs/xfs_log_cil.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-)
fs/xfs/xfs_log_cil.c +21 -4
@@ -656,6 +656,8 @@ xlog_cil_push_work(struct xfs_log_vec lvhdr = {NULL };xfs_lsn_t commit_lsn;xfs_lsn_t push_seq; +struct bio bio; +DECLARE_COMPLETION_ONSTACK (bdev_flush); new_ctx =kmem_zalloc (sizeof (*new_ctx),KM_NOFS ); new_ctx->ticket =xlog_cil_ticket_alloc (log);
@@ -719,10 +721,19 @@ xlog_cil_push_work(spin_unlock (&cil->xc_push_lock);/* -* pull all the log vectors off the items in the CIL, and -* remove the items from the CIL. We don't need the CIL lock -* here because it's only needed on the transaction commit -* side which is currently locked out by the flush lock. +* The CIL is stable at this point - nothing new will be added to it +* because we hold the flush lock exclusively. Hence we can now issue +* a cache flush to ensure all the completed metadata in the journal we +* are about to overwrite is on stable storage. +*/ +xfs_flush_bdev_async (&bio, log->l_mp->m_ddev_targp->bt_bdev, + &bdev_flush); + +/* +* Pull all the log vectors off the items in the CIL, and remove the +* items from the CIL. We don't need the CIL lock here because it's only +* needed on the transaction commit side which is currently locked out +* by the flush lock. */ lv =NULL ; num_iovecs =0 ;
@@ -806,6 +817,12 @@ xlog_cil_push_work( lvhdr.lv_iovecp = &lhdr; lvhdr.lv_next = ctx->lv_chain; +/* +* Before we format and submit the first iclog, we have to ensure that +* the metadata writeback ordering cache flush is complete. +*/ +wait_for_completion (&bdev_flush); + error =xlog_write (log, &lvhdr, tic, &ctx->start_lsn,NULL ,0 , true);if (error) goto out_abort_free_ticket;
Signature · 1 line
2.31.1
kernel test robot
build botRe: [PATCH 29/39] xfs: introduce per-cpu CIL tracking structure
In reply to Dave ChinnerThank you for the patch! Yet something to improve:
Hi Dave,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on xfs-linux/for-next]
[also build test ERROR on linus/master v5.13-rc4 next-20210602] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Dave-Chinner/xfs-CIL-and-log-optimisations/20210603-134113 base: https://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git for-next config: arm-randconfig-r023-20210603 (attached as .config) compiler: clang version 13.0.0 (https://github.com/llvm/llvm-project d8e0ae9a76a62bdc6117630d59bf9967ac9bb4ea)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# install arm cross compiling tool for clang build
# apt-get install binutils-arm-linux-gnueabi
# https://github.com/0day-ci/linux/commit/7832a61eefffdb48fdd863bbb0da4b8b7a4e2bb9
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Dave-Chinner/xfs-CIL-and-log-optimisations/20210603-134113 git checkout 7832a61eefffdb48fdd863bbb0da4b8b7a4e2bb9
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=arm
If you fix the issue, kindly add following tag as appropriate
All errors (new ones prefixed by >>):
>> fs/xfs/xfs_log_cil.c:1454:30: error: invalid operands to binary expression ('void' and 'int')
if (xlog_cil_pcp_hpadd(cil) < 0) {
~~~~~~~~~~~~~~~~~~~~~~~ ^ ~1 error generated.
vim +1454 fs/xfs/xfs_log_cil.c
1443
1444 static void __percpu *
1445 xlog_cil_pcp_alloc(
1446 struct xfs_cil *cil)
1447 {
1448 void __percpu *pcp;
1449
1450 pcp = alloc_percpu(struct xlog_cil_pcp);
1451 if (!pcp)
1452 return NULL;
1453
> 1454 if (xlog_cil_pcp_hpadd(cil) < 0) { 1455 free_percpu(pcp);
1456 return NULL;
1457 }
1458 return pcp;
1459 }
1460
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/[email protected]
kernel test robot
build botRe: [PATCH 29/39] xfs: introduce per-cpu CIL tracking structure
In reply to Dave ChinnerThank you for the patch! Yet something to improve:
Hi Dave,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on xfs-linux/for-next]
[also build test ERROR on linus/master v5.13-rc4 next-20210602] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Dave-Chinner/xfs-CIL-and-log-optimisations/20210603-134113 base: https://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git for-next config: arc-randconfig-r034-20210603 (attached as .config) compiler: arc-elf-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/7832a61eefffdb48fdd863bbb0da4b8b7a4e2bb9
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Dave-Chinner/xfs-CIL-and-log-optimisations/20210603-134113 git checkout 7832a61eefffdb48fdd863bbb0da4b8b7a4e2bb9
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arc
If you fix the issue, kindly add following tag as appropriate
All errors (new ones prefixed by >>):
In file included from include/linux/string.h:6,
from include/linux/uuid.h:12,
from fs/xfs/xfs_linux.h:10,
from fs/xfs/xfs.h:22,
from fs/xfs/xfs_log_cil.c:6:
fs/xfs/xfs_log_cil.c: In function 'xlog_cil_pcp_alloc':
>> fs/xfs/xfs_log_cil.c:1454:6: error: void value not ignored as it ought to be
1454 | if (xlog_cil_pcp_hpadd(cil) < 0) {
| ^~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:58:52: note: in definition of macro '__trace_if_var'
58 | #define __trace_if_var(cond) (__builtin_constant_p(cond) ? (cond) : __trace_if_value(cond))
| ^~~~
fs/xfs/xfs_log_cil.c:1454:2: note: in expansion of macro 'if'
1454 | if (xlog_cil_pcp_hpadd(cil) < 0) {
| ^~
>> fs/xfs/xfs_log_cil.c:1454:6: error: void value not ignored as it ought to be
1454 | if (xlog_cil_pcp_hpadd(cil) < 0) {
| ^~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:58:61: note: in definition of macro '__trace_if_var'
58 | #define __trace_if_var(cond) (__builtin_constant_p(cond) ? (cond) : __trace_if_value(cond))
| ^~~~
fs/xfs/xfs_log_cil.c:1454:2: note: in expansion of macro 'if'
1454 | if (xlog_cil_pcp_hpadd(cil) < 0) {
| ^~
>> fs/xfs/xfs_log_cil.c:1454:6: error: void value not ignored as it ought to be
1454 | if (xlog_cil_pcp_hpadd(cil) < 0) {
| ^~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:69:3: note: in definition of macro '__trace_if_value'
69 | (cond) ? \
| ^~~~
include/linux/compiler.h:56:28: note: in expansion of macro '__trace_if_var'
56 | #define if(cond, ...) if ( __trace_if_var( !!(cond , ## __VA_ARGS__) ) )
| ^~~~~~~~~~~~~~
fs/xfs/xfs_log_cil.c:1454:2: note: in expansion of macro 'if'
1454 | if (xlog_cil_pcp_hpadd(cil) < 0) {
| ^~vim +1454 fs/xfs/xfs_log_cil.c
1443
1444 static void __percpu *
1445 xlog_cil_pcp_alloc(
1446 struct xfs_cil *cil)
1447 {
1448 void __percpu *pcp;
1449
1450 pcp = alloc_percpu(struct xlog_cil_pcp);
1451 if (!pcp)
1452 return NULL;
1453
> 1454 if (xlog_cil_pcp_hpadd(cil) < 0) { 1455 free_percpu(pcp);
1456 return NULL;
1457 }
1458 return pcp;
1459 }
1460
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/[email protected]
kernel test robot
build botRe: [PATCH 35/39] xfs: convert log vector chain to use list heads
In reply to Dave ChinnerThank you for the patch! Perhaps something to improve:
Hi Dave,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on xfs-linux/for-next]
[also build test WARNING on linus/master v5.13-rc4 next-20210602] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Dave-Chinner/xfs-CIL-and-log-optimisations/20210603-134113 base: https://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git for-next config: arm-randconfig-r023-20210603 (attached as .config) compiler: clang version 13.0.0 (https://github.com/llvm/llvm-project d8e0ae9a76a62bdc6117630d59bf9967ac9bb4ea)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# install arm cross compiling tool for clang build
# apt-get install binutils-arm-linux-gnueabi
# https://github.com/0day-ci/linux/commit/b9844caa1f30dfae6f4e78de2b70126ba2898eda
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Dave-Chinner/xfs-CIL-and-log-optimisations/20210603-134113 git checkout b9844caa1f30dfae6f4e78de2b70126ba2898eda
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=arm
If you fix the issue, kindly add following tag as appropriate
All warnings (new ones prefixed by >>):
>> fs/xfs/xfs_log_cil.c:836:31: warning: suggest braces around initialization of subobject [-Wmissing-braces]
struct xfs_log_vec lvhdr = { NULL };
^~~~
{ }
include/linux/stddef.h:8:14: note: expanded from macro 'NULL'
#define NULL ((void *)0)
^~~~~~~~~~~
fs/xfs/xfs_log_cil.c:1550:30: error: invalid operands to binary expression ('void' and 'int')
if (xlog_cil_pcp_hpadd(cil) < 0) {
~~~~~~~~~~~~~~~~~~~~~~~ ^ ~1 warning and 1 error generated.
vim +836 fs/xfs/xfs_log_cil.c
08a813aea7434e Dave Chinner 2021-06-03 806
71e330b593905e Dave Chinner 2010-05-21 807 /*
c7cc296ddd1f6d Christoph Hellwig 2020-03-20 808 * Push the Committed Item List to the log.
c7cc296ddd1f6d Christoph Hellwig 2020-03-20 809 *
c7cc296ddd1f6d Christoph Hellwig 2020-03-20 810 * If the current sequence is the same as xc_push_seq we need to do a flush. If
c7cc296ddd1f6d Christoph Hellwig 2020-03-20 811 * xc_push_seq is less than the current sequence, then it has already been
a44f13edf0ebb4 Dave Chinner 2010-08-24 812 * flushed and we don't need to do anything - the caller will wait for it to
a44f13edf0ebb4 Dave Chinner 2010-08-24 813 * complete if necessary.
a44f13edf0ebb4 Dave Chinner 2010-08-24 814 *
c7cc296ddd1f6d Christoph Hellwig 2020-03-20 815 * xc_push_seq is checked unlocked against the sequence number for a match.
c7cc296ddd1f6d Christoph Hellwig 2020-03-20 816 * Hence we can allow log forces to run racily and not issue pushes for the
c7cc296ddd1f6d Christoph Hellwig 2020-03-20 817 * same sequence twice. If we get a race between multiple pushes for the same
c7cc296ddd1f6d Christoph Hellwig 2020-03-20 818 * sequence they will block on the first one and then abort, hence avoiding
c7cc296ddd1f6d Christoph Hellwig 2020-03-20 819 * needless pushes.
c7cc296ddd1f6d Christoph Hellwig 2020-03-20 820 */
c7cc296ddd1f6d Christoph Hellwig 2020-03-20 821 static void
c7cc296ddd1f6d Christoph Hellwig 2020-03-20 822 xlog_cil_push_work(
c7cc296ddd1f6d Christoph Hellwig 2020-03-20 823 struct work_struct *work)
71e330b593905e Dave Chinner 2010-05-21 824 {
61691dab98fb92 Dave Chinner 2021-06-03 825 struct xfs_cil_ctx *ctx =
61691dab98fb92 Dave Chinner 2021-06-03 826 container_of(work, struct xfs_cil_ctx, push_work);
61691dab98fb92 Dave Chinner 2021-06-03 827 struct xfs_cil *cil = ctx->cil;
c7cc296ddd1f6d Christoph Hellwig 2020-03-20 828 struct xlog *log = cil->xc_log;
71e330b593905e Dave Chinner 2010-05-21 829 struct xfs_log_vec *lv;
71e330b593905e Dave Chinner 2010-05-21 830 struct xfs_cil_ctx *new_ctx;
71e330b593905e Dave Chinner 2010-05-21 831 struct xlog_in_core *commit_iclog;
964c4f5053f0cd Dave Chinner 2021-06-03 832 int num_iovecs = 0;
964c4f5053f0cd Dave Chinner 2021-06-03 833 int num_bytes = 0;
71e330b593905e Dave Chinner 2010-05-21 834 int error = 0;
81be7bf64fac48 Dave Chinner 2021-06-03 835 struct xlog_cil_trans_hdr thdr;
71e330b593905e Dave Chinner 2010-05-21 @836 struct xfs_log_vec lvhdr = { NULL };
71e330b593905e Dave Chinner 2010-05-21 837 xfs_lsn_t commit_lsn;
4c2d542f2e7865 Dave Chinner 2012-04-23 838 xfs_lsn_t push_seq;
395ce53dd09e23 Dave Chinner 2021-06-03 839 struct bio bio;
395ce53dd09e23 Dave Chinner 2021-06-03 840 DECLARE_COMPLETION_ONSTACK(bdev_flush);
ed3d678659f2f3 Dave Chinner 2021-06-03 841 bool push_commit_stable;
71e330b593905e Dave Chinner 2010-05-21 842
61691dab98fb92 Dave Chinner 2021-06-03 843 new_ctx = xlog_cil_ctx_alloc();
71e330b593905e Dave Chinner 2010-05-21 844 new_ctx->ticket = xlog_cil_ticket_alloc(log);
71e330b593905e Dave Chinner 2010-05-21 845
71e330b593905e Dave Chinner 2010-05-21 846 down_write(&cil->xc_ctx_lock);
71e330b593905e Dave Chinner 2010-05-21 847
4bb928cdb900d0 Dave Chinner 2013-08-12 848 spin_lock(&cil->xc_push_lock);
4c2d542f2e7865 Dave Chinner 2012-04-23 849 push_seq = cil->xc_push_seq;
4c2d542f2e7865 Dave Chinner 2012-04-23 850 ASSERT(push_seq <= ctx->sequence);
ed3d678659f2f3 Dave Chinner 2021-06-03 851 push_commit_stable = cil->xc_push_commit_stable;
ed3d678659f2f3 Dave Chinner 2021-06-03 852 cil->xc_push_commit_stable = false;
71e330b593905e Dave Chinner 2010-05-21 853
0e7ab7efe77451 Dave Chinner 2020-03-24 854 /*
1ac67445c59a8e Dave Chinner 2021-06-03 855 * As we are about to switch to a new, empty CIL context, we no longer
1ac67445c59a8e Dave Chinner 2021-06-03 856 * need to throttle tasks on CIL space overruns. Wake any waiters that
1ac67445c59a8e Dave Chinner 2021-06-03 857 * the hard push throttle may have caught so they can start committing
1ac67445c59a8e Dave Chinner 2021-06-03 858 * to the new context. The ctx->xc_push_lock provides the serialisation
1ac67445c59a8e Dave Chinner 2021-06-03 859 * necessary for safely using the lockless waitqueue_active() check in
1ac67445c59a8e Dave Chinner 2021-06-03 860 * this context.
1ac67445c59a8e Dave Chinner 2021-06-03 861 */
1ac67445c59a8e Dave Chinner 2021-06-03 862 if (waitqueue_active(&cil->xc_push_wait))
c7f87f3984cfa1 Dave Chinner 2020-06-16 863 wake_up_all(&cil->xc_push_wait);
0e7ab7efe77451 Dave Chinner 2020-03-24 864
4c2d542f2e7865 Dave Chinner 2012-04-23 865 /*
4c2d542f2e7865 Dave Chinner 2012-04-23 866 * Check if we've anything to push. If there is nothing, then we don't
4c2d542f2e7865 Dave Chinner 2012-04-23 867 * move on to a new sequence number and so we have to be able to push
4c2d542f2e7865 Dave Chinner 2012-04-23 868 * this sequence again later.
4c2d542f2e7865 Dave Chinner 2012-04-23 869 */
b8fab3c5759918 Dave Chinner 2021-06-03 870 if (test_bit(XLOG_CIL_EMPTY, &cil->xc_flags)) {
4c2d542f2e7865 Dave Chinner 2012-04-23 871 cil->xc_push_seq = 0;
4bb928cdb900d0 Dave Chinner 2013-08-12 872 spin_unlock(&cil->xc_push_lock);
a44f13edf0ebb4 Dave Chinner 2010-08-24 873 goto out_skip;
4c2d542f2e7865 Dave Chinner 2012-04-23 874 }
4c2d542f2e7865 Dave Chinner 2012-04-23 875
a44f13edf0ebb4 Dave Chinner 2010-08-24 876
cf085a1b5d2214 Joe Perches 2019-11-07 877 /* check for a previously pushed sequence */
61691dab98fb92 Dave Chinner 2021-06-03 878 if (push_seq < ctx->sequence) {
8af3dcd3c89aef Dave Chinner 2014-09-23 879 spin_unlock(&cil->xc_push_lock);
df806158b0f6eb Dave Chinner 2010-05-17 880 goto out_skip;
8af3dcd3c89aef Dave Chinner 2014-09-23 881 }
8af3dcd3c89aef Dave Chinner 2014-09-23 882
8af3dcd3c89aef Dave Chinner 2014-09-23 883 /*
8af3dcd3c89aef Dave Chinner 2014-09-23 884 * We are now going to push this context, so add it to the committing
8af3dcd3c89aef Dave Chinner 2014-09-23 885 * list before we do anything else. This ensures that anyone waiting on
8af3dcd3c89aef Dave Chinner 2014-09-23 886 * this push can easily detect the difference between a "push in
8af3dcd3c89aef Dave Chinner 2014-09-23 887 * progress" and "CIL is empty, nothing to do".
8af3dcd3c89aef Dave Chinner 2014-09-23 888 *
8af3dcd3c89aef Dave Chinner 2014-09-23 889 * IOWs, a wait loop can now check for:
8af3dcd3c89aef Dave Chinner 2014-09-23 890 * the current sequence not being found on the committing list;
8af3dcd3c89aef Dave Chinner 2014-09-23 891 * an empty CIL; and
8af3dcd3c89aef Dave Chinner 2014-09-23 892 * an unchanged sequence number
8af3dcd3c89aef Dave Chinner 2014-09-23 893 * to detect a push that had nothing to do and therefore does not need
8af3dcd3c89aef Dave Chinner 2014-09-23 894 * waiting on. If the CIL is not empty, we get put on the committing
8af3dcd3c89aef Dave Chinner 2014-09-23 895 * list before emptying the CIL and bumping the sequence number. Hence
8af3dcd3c89aef Dave Chinner 2014-09-23 896 * an empty CIL and an unchanged sequence number means we jumped out
8af3dcd3c89aef Dave Chinner 2014-09-23 897 * above after doing nothing.
8af3dcd3c89aef Dave Chinner 2014-09-23 898 *
8af3dcd3c89aef Dave Chinner 2014-09-23 899 * Hence the waiter will either find the commit sequence on the
8af3dcd3c89aef Dave Chinner 2014-09-23 900 * committing list or the sequence number will be unchanged and the CIL
8af3dcd3c89aef Dave Chinner 2014-09-23 901 * still dirty. In that latter case, the push has not yet started, and
8af3dcd3c89aef Dave Chinner 2014-09-23 902 * so the waiter will have to continue trying to check the CIL
8af3dcd3c89aef Dave Chinner 2014-09-23 903 * committing list until it is found. In extreme cases of delay, the
8af3dcd3c89aef Dave Chinner 2014-09-23 904 * sequence may fully commit between the attempts the wait makes to wait
8af3dcd3c89aef Dave Chinner 2014-09-23 905 * on the commit sequence.
8af3dcd3c89aef Dave Chinner 2014-09-23 906 */
8af3dcd3c89aef Dave Chinner 2014-09-23 907 list_add(&ctx->committing, &cil->xc_committing);
8af3dcd3c89aef Dave Chinner 2014-09-23 908 spin_unlock(&cil->xc_push_lock);
df806158b0f6eb Dave Chinner 2010-05-17 909
71e330b593905e Dave Chinner 2010-05-21 910 /*
395ce53dd09e23 Dave Chinner 2021-06-03 911 * The CIL is stable at this point - nothing new will be added to it
395ce53dd09e23 Dave Chinner 2021-06-03 912 * because we hold the flush lock exclusively. Hence we can now issue
395ce53dd09e23 Dave Chinner 2021-06-03 913 * a cache flush to ensure all the completed metadata in the journal we
395ce53dd09e23 Dave Chinner 2021-06-03 914 * are about to overwrite is on stable storage.
395ce53dd09e23 Dave Chinner 2021-06-03 915 */
395ce53dd09e23 Dave Chinner 2021-06-03 916 xfs_flush_bdev_async(&bio, log->l_mp->m_ddev_targp->bt_bdev,
395ce53dd09e23 Dave Chinner 2021-06-03 917 &bdev_flush);
395ce53dd09e23 Dave Chinner 2021-06-03 918
4da22b91f10349 Dave Chinner 2021-06-03 919 xlog_cil_pcp_aggregate(cil, ctx);
4da22b91f10349 Dave Chinner 2021-06-03 920
3bf44a60c84eae Dave Chinner 2021-06-03 921 list_sort(NULL, &ctx->log_items, xlog_cil_order_cmp);
3bf44a60c84eae Dave Chinner 2021-06-03 922 while (!list_empty(&ctx->log_items)) {
71e330b593905e Dave Chinner 2010-05-21 923 struct xfs_log_item *item;
71e330b593905e Dave Chinner 2010-05-21 924
3bf44a60c84eae Dave Chinner 2021-06-03 925 item = list_first_entry(&ctx->log_items,
71e330b593905e Dave Chinner 2010-05-21 926 struct xfs_log_item, li_cil);
b9844caa1f30df Dave Chinner 2021-06-03 927 lv = item->li_lv;
71e330b593905e Dave Chinner 2010-05-21 928 list_del_init(&item->li_cil);
08a813aea7434e Dave Chinner 2021-06-03 929 item->li_order_id = 0;
71e330b593905e Dave Chinner 2010-05-21 930 item->li_lv = NULL;
964c4f5053f0cd Dave Chinner 2021-06-03 931
b9844caa1f30df Dave Chinner 2021-06-03 932 num_iovecs += lv->lv_niovecs;
964c4f5053f0cd Dave Chinner 2021-06-03 933 /* we don't write ordered log vectors */
964c4f5053f0cd Dave Chinner 2021-06-03 934 if (lv->lv_buf_len != XFS_LOG_VEC_ORDERED)
964c4f5053f0cd Dave Chinner 2021-06-03 935 num_bytes += lv->lv_bytes;
b9844caa1f30df Dave Chinner 2021-06-03 936
b9844caa1f30df Dave Chinner 2021-06-03 937 list_add_tail(&lv->lv_list, &ctx->lv_chain);
b9844caa1f30df Dave Chinner 2021-06-03 938
71e330b593905e Dave Chinner 2010-05-21 939 }
71e330b593905e Dave Chinner 2010-05-21 940
71e330b593905e Dave Chinner 2010-05-21 941 /*
61691dab98fb92 Dave Chinner 2021-06-03 942 * Switch the contexts so we can drop the context lock and move out
71e330b593905e Dave Chinner 2010-05-21 943 * of a shared context. We can't just go straight to the commit record,
71e330b593905e Dave Chinner 2010-05-21 944 * though - we need to synchronise with previous and future commits so
71e330b593905e Dave Chinner 2010-05-21 945 * that the commit records are correctly ordered in the log to ensure
71e330b593905e Dave Chinner 2010-05-21 946 * that we process items during log IO completion in the correct order.
71e330b593905e Dave Chinner 2010-05-21 947 *
71e330b593905e Dave Chinner 2010-05-21 948 * For example, if we get an EFI in one checkpoint and the EFD in the
71e330b593905e Dave Chinner 2010-05-21 949 * next (e.g. due to log forces), we do not want the checkpoint with
71e330b593905e Dave Chinner 2010-05-21 950 * the EFD to be committed before the checkpoint with the EFI. Hence
71e330b593905e Dave Chinner 2010-05-21 951 * we must strictly order the commit records of the checkpoints so
71e330b593905e Dave Chinner 2010-05-21 952 * that: a) the checkpoint callbacks are attached to the iclogs in the
71e330b593905e Dave Chinner 2010-05-21 953 * correct order; and b) the checkpoints are replayed in correct order
71e330b593905e Dave Chinner 2010-05-21 954 * in log recovery.
71e330b593905e Dave Chinner 2010-05-21 955 *
71e330b593905e Dave Chinner 2010-05-21 956 * Hence we need to add this context to the committing context list so
71e330b593905e Dave Chinner 2010-05-21 957 * that higher sequences will wait for us to write out a commit record
71e330b593905e Dave Chinner 2010-05-21 958 * before they do.
f876e44603ad09 Dave Chinner 2014-02-27 959 *
015de1f284aa49 Dave Chinner 2021-06-03 960 * xfs_log_force_seq requires us to mirror the new sequence into the cil
f876e44603ad09 Dave Chinner 2014-02-27 961 * structure atomically with the addition of this sequence to the
f876e44603ad09 Dave Chinner 2014-02-27 962 * committing list. This also ensures that we can do unlocked checks
f876e44603ad09 Dave Chinner 2014-02-27 963 * against the current sequence in log forces without risking
f876e44603ad09 Dave Chinner 2014-02-27 964 * deferencing a freed context pointer.
71e330b593905e Dave Chinner 2010-05-21 965 */
4bb928cdb900d0 Dave Chinner 2013-08-12 966 spin_lock(&cil->xc_push_lock);
61691dab98fb92 Dave Chinner 2021-06-03 967 xlog_cil_ctx_switch(cil, new_ctx);
4bb928cdb900d0 Dave Chinner 2013-08-12 968 spin_unlock(&cil->xc_push_lock);
71e330b593905e Dave Chinner 2010-05-21 969 up_write(&cil->xc_ctx_lock);
71e330b593905e Dave Chinner 2010-05-21 970
71e330b593905e Dave Chinner 2010-05-21 971 /*
71e330b593905e Dave Chinner 2010-05-21 972 * Build a checkpoint transaction header and write it to the log to
71e330b593905e Dave Chinner 2010-05-21 973 * begin the transaction. We need to account for the space used by the
71e330b593905e Dave Chinner 2010-05-21 974 * transaction header here as it is not accounted for in xlog_write().
b9844caa1f30df Dave Chinner 2021-06-03 975 * Add the lvhdr to the head of the lv chain we pass to xlog_write() so
b9844caa1f30df Dave Chinner 2021-06-03 976 * it gets written into the iclog first.
71e330b593905e Dave Chinner 2010-05-21 977 */
81be7bf64fac48 Dave Chinner 2021-06-03 978 xlog_cil_build_trans_hdr(ctx, &thdr, &lvhdr, num_iovecs);
964c4f5053f0cd Dave Chinner 2021-06-03 979 num_bytes += lvhdr.lv_bytes;
b9844caa1f30df Dave Chinner 2021-06-03 980 list_add(&lvhdr.lv_list, &ctx->lv_chain);
71e330b593905e Dave Chinner 2010-05-21 981
395ce53dd09e23 Dave Chinner 2021-06-03 982 /*
395ce53dd09e23 Dave Chinner 2021-06-03 983 * Before we format and submit the first iclog, we have to ensure that
395ce53dd09e23 Dave Chinner 2021-06-03 984 * the metadata writeback ordering cache flush is complete.
395ce53dd09e23 Dave Chinner 2021-06-03 985 */
395ce53dd09e23 Dave Chinner 2021-06-03 986 wait_for_completion(&bdev_flush);
395ce53dd09e23 Dave Chinner 2021-06-03 987
81be7bf64fac48 Dave Chinner 2021-06-03 988 /*
81be7bf64fac48 Dave Chinner 2021-06-03 989 * The LSN we need to pass to the log items on transaction commit is the
81be7bf64fac48 Dave Chinner 2021-06-03 990 * LSN reported by the first log vector write, not the commit lsn. If we
81be7bf64fac48 Dave Chinner 2021-06-03 991 * use the commit record lsn then we can move the tail beyond the grant
81be7bf64fac48 Dave Chinner 2021-06-03 992 * write head.
81be7bf64fac48 Dave Chinner 2021-06-03 993 */
b9844caa1f30df Dave Chinner 2021-06-03 994 error = xlog_write(log, &ctx->lv_chain, ctx->ticket, &ctx->start_lsn,
b9844caa1f30df Dave Chinner 2021-06-03 995 NULL, num_bytes);
b9844caa1f30df Dave Chinner 2021-06-03 996
b9844caa1f30df Dave Chinner 2021-06-03 997 /*
b9844caa1f30df Dave Chinner 2021-06-03 998 * Take the lvhdr back off the lv_chain as it should not be passed
b9844caa1f30df Dave Chinner 2021-06-03 999 * to log IO completion.
b9844caa1f30df Dave Chinner 2021-06-03 1000 */
b9844caa1f30df Dave Chinner 2021-06-03 1001 list_del(&lvhdr.lv_list);
71e330b593905e Dave Chinner 2010-05-21 1002 if (error)
7db37c5e6575b2 Dave Chinner 2011-01-27 1003 goto out_abort_free_ticket;
71e330b593905e Dave Chinner 2010-05-21 1004
71e330b593905e Dave Chinner 2010-05-21 1005 /*
71e330b593905e Dave Chinner 2010-05-21 1006 * now that we've written the checkpoint into the log, strictly
71e330b593905e Dave Chinner 2010-05-21 1007 * order the commit records so replay will get them in the right order.
71e330b593905e Dave Chinner 2010-05-21 1008 */
71e330b593905e Dave Chinner 2010-05-21 1009 restart:
4bb928cdb900d0 Dave Chinner 2013-08-12 1010 spin_lock(&cil->xc_push_lock);
71e330b593905e Dave Chinner 2010-05-21 1011 list_for_each_entry(new_ctx, &cil->xc_committing, committing) {
ac983517ec5941 Dave Chinner 2014-05-07 1012 /*
ac983517ec5941 Dave Chinner 2014-05-07 1013 * Avoid getting stuck in this loop because we were woken by the
ac983517ec5941 Dave Chinner 2014-05-07 1014 * shutdown, but then went back to sleep once already in the
ac983517ec5941 Dave Chinner 2014-05-07 1015 * shutdown state.
ac983517ec5941 Dave Chinner 2014-05-07 1016 */
ac983517ec5941 Dave Chinner 2014-05-07 1017 if (XLOG_FORCED_SHUTDOWN(log)) {
ac983517ec5941 Dave Chinner 2014-05-07 1018 spin_unlock(&cil->xc_push_lock);
ac983517ec5941 Dave Chinner 2014-05-07 1019 goto out_abort_free_ticket;
ac983517ec5941 Dave Chinner 2014-05-07 1020 }
ac983517ec5941 Dave Chinner 2014-05-07 1021
71e330b593905e Dave Chinner 2010-05-21 1022 /*
71e330b593905e Dave Chinner 2010-05-21 1023 * Higher sequences will wait for this one so skip them.
ac983517ec5941 Dave Chinner 2014-05-07 1024 * Don't wait for our own sequence, either.
71e330b593905e Dave Chinner 2010-05-21 1025 */
71e330b593905e Dave Chinner 2010-05-21 1026 if (new_ctx->sequence >= ctx->sequence)
71e330b593905e Dave Chinner 2010-05-21 1027 continue;
71e330b593905e Dave Chinner 2010-05-21 1028 if (!new_ctx->commit_lsn) {
71e330b593905e Dave Chinner 2010-05-21 1029 /*
71e330b593905e Dave Chinner 2010-05-21 1030 * It is still being pushed! Wait for the push to
71e330b593905e Dave Chinner 2010-05-21 1031 * complete, then start again from the beginning.
71e330b593905e Dave Chinner 2010-05-21 1032 */
4bb928cdb900d0 Dave Chinner 2013-08-12 1033 xlog_wait(&cil->xc_commit_wait, &cil->xc_push_lock);
71e330b593905e Dave Chinner 2010-05-21 1034 goto restart;
71e330b593905e Dave Chinner 2010-05-21 1035 }
71e330b593905e Dave Chinner 2010-05-21 1036 }
4bb928cdb900d0 Dave Chinner 2013-08-12 1037 spin_unlock(&cil->xc_push_lock);
71e330b593905e Dave Chinner 2010-05-21 1038
81be7bf64fac48 Dave Chinner 2021-06-03 1039 error = xlog_commit_record(log, ctx->ticket, &commit_iclog, &commit_lsn);
dd401770b0ff68 Dave Chinner 2020-03-25 1040 if (error)
dd401770b0ff68 Dave Chinner 2020-03-25 1041 goto out_abort_free_ticket;
dd401770b0ff68 Dave Chinner 2020-03-25 1042
81be7bf64fac48 Dave Chinner 2021-06-03 1043 xfs_log_ticket_ungrant(log, ctx->ticket);
71e330b593905e Dave Chinner 2010-05-21 1044
89ae379d564c5d Christoph Hellwig 2019-06-28 1045 spin_lock(&commit_iclog->ic_callback_lock);
1858bb0bec612d Christoph Hellwig 2019-10-14 1046 if (commit_iclog->ic_state == XLOG_STATE_IOERROR) {
89ae379d564c5d Christoph Hellwig 2019-06-28 1047 spin_unlock(&commit_iclog->ic_callback_lock);
71e330b593905e Dave Chinner 2010-05-21 1048 goto out_abort;
89ae379d564c5d Christoph Hellwig 2019-06-28 1049 }
89ae379d564c5d Christoph Hellwig 2019-06-28 1050 ASSERT_ALWAYS(commit_iclog->ic_state == XLOG_STATE_ACTIVE ||
89ae379d564c5d Christoph Hellwig 2019-06-28 1051 commit_iclog->ic_state == XLOG_STATE_WANT_SYNC);
89ae379d564c5d Christoph Hellwig 2019-06-28 1052 list_add_tail(&ctx->iclog_entry, &commit_iclog->ic_callbacks);
89ae379d564c5d Christoph Hellwig 2019-06-28 1053 spin_unlock(&commit_iclog->ic_callback_lock);
71e330b593905e Dave Chinner 2010-05-21 1054
71e330b593905e Dave Chinner 2010-05-21 1055 /*
71e330b593905e Dave Chinner 2010-05-21 1056 * now the checkpoint commit is complete and we've attached the
71e330b593905e Dave Chinner 2010-05-21 1057 * callbacks to the iclog we can assign the commit LSN to the context
71e330b593905e Dave Chinner 2010-05-21 1058 * and wake up anyone who is waiting for the commit to complete.
71e330b593905e Dave Chinner 2010-05-21 1059 */
4bb928cdb900d0 Dave Chinner 2013-08-12 1060 spin_lock(&cil->xc_push_lock);
71e330b593905e Dave Chinner 2010-05-21 1061 ctx->commit_lsn = commit_lsn;
eb40a87500ac2f Dave Chinner 2010-12-21 1062 wake_up_all(&cil->xc_commit_wait);
4bb928cdb900d0 Dave Chinner 2013-08-12 1063 spin_unlock(&cil->xc_push_lock);
71e330b593905e Dave Chinner 2010-05-21 1064
bde964f7e822cc Dave Chinner 2021-06-03 1065 /*
bde964f7e822cc Dave Chinner 2021-06-03 1066 * If the checkpoint spans multiple iclogs, wait for all previous
80d287de7b49ed Dave Chinner 2021-06-03 1067 * iclogs to complete before we submit the commit_iclog. In this case,
80d287de7b49ed Dave Chinner 2021-06-03 1068 * the commit_iclog write needs to issue a pre-flush so that the
80d287de7b49ed Dave Chinner 2021-06-03 1069 * ordering is correctly preserved down to stable storage.
bde964f7e822cc Dave Chinner 2021-06-03 1070 */
bde964f7e822cc Dave Chinner 2021-06-03 1071 spin_lock(&log->l_icloglock);
80d287de7b49ed Dave Chinner 2021-06-03 1072 if (ctx->start_lsn != commit_lsn) {
bde964f7e822cc Dave Chinner 2021-06-03 1073 xlog_wait_on_iclog(commit_iclog->ic_prev);
80d287de7b49ed Dave Chinner 2021-06-03 1074 spin_lock(&log->l_icloglock);
80d287de7b49ed Dave Chinner 2021-06-03 1075 commit_iclog->ic_flags |= XLOG_ICL_NEED_FLUSH;
bde964f7e822cc Dave Chinner 2021-06-03 1076 }
bde964f7e822cc Dave Chinner 2021-06-03 1077
80d287de7b49ed Dave Chinner 2021-06-03 1078 /*
80d287de7b49ed Dave Chinner 2021-06-03 1079 * The commit iclog must be written to stable storage to guarantee
80d287de7b49ed Dave Chinner 2021-06-03 1080 * journal IO vs metadata writeback IO is correctly ordered on stable
80d287de7b49ed Dave Chinner 2021-06-03 1081 * storage.
ed3d678659f2f3 Dave Chinner 2021-06-03 1082 *
ed3d678659f2f3 Dave Chinner 2021-06-03 1083 * If the push caller needs the commit to be immediately stable and the
ed3d678659f2f3 Dave Chinner 2021-06-03 1084 * commit_iclog is not yet marked as XLOG_STATE_WANT_SYNC to indicate it
ed3d678659f2f3 Dave Chinner 2021-06-03 1085 * will be written when released, switch it's state to WANT_SYNC right
ed3d678659f2f3 Dave Chinner 2021-06-03 1086 * now.
80d287de7b49ed Dave Chinner 2021-06-03 1087 */
80d287de7b49ed Dave Chinner 2021-06-03 1088 commit_iclog->ic_flags |= XLOG_ICL_NEED_FUA;
ed3d678659f2f3 Dave Chinner 2021-06-03 1089 if (push_commit_stable && commit_iclog->ic_state == XLOG_STATE_ACTIVE)
ed3d678659f2f3 Dave Chinner 2021-06-03 1090 xlog_state_switch_iclogs(log, commit_iclog, 0);
80d287de7b49ed Dave Chinner 2021-06-03 1091 xlog_state_release_iclog(log, commit_iclog);
80d287de7b49ed Dave Chinner 2021-06-03 1092 spin_unlock(&log->l_icloglock);
c7cc296ddd1f6d Christoph Hellwig 2020-03-20 1093 return;
71e330b593905e Dave Chinner 2010-05-21 1094
71e330b593905e Dave Chinner 2010-05-21 1095 out_skip:
71e330b593905e Dave Chinner 2010-05-21 1096 up_write(&cil->xc_ctx_lock);
71e330b593905e Dave Chinner 2010-05-21 1097 xfs_log_ticket_put(new_ctx->ticket);
71e330b593905e Dave Chinner 2010-05-21 1098 kmem_free(new_ctx);
c7cc296ddd1f6d Christoph Hellwig 2020-03-20 1099 return;
71e330b593905e Dave Chinner 2010-05-21 1100
7db37c5e6575b2 Dave Chinner 2011-01-27 1101 out_abort_free_ticket:
81be7bf64fac48 Dave Chinner 2021-06-03 1102 xfs_log_ticket_ungrant(log, ctx->ticket);
71e330b593905e Dave Chinner 2010-05-21 1103 out_abort:
12e6a0f449d585 Christoph Hellwig 2020-03-20 1104 ASSERT(XLOG_FORCED_SHUTDOWN(log));
12e6a0f449d585 Christoph Hellwig 2020-03-20 1105 xlog_cil_committed(ctx);
4c2d542f2e7865 Dave Chinner 2012-04-23 1106 }
4c2d542f2e7865 Dave Chinner 2012-04-23 1107 ---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
Re: [PATCH 31/39] xfs: track CIL ticket reservation in percpu structure
In reply to Dave ChinnerQuoted 20 lines · Dave Chinner
From: Dave Chinner <[email protected]>
To get it out from under the cil spinlock.
Signed-off-by Dave Chinner <[email protected]>Reviewed-by Darrick J. Wong <[email protected]>--- fs/xfs/xfs_log_cil.c | 21 ++++++++++++++++----- fs/xfs/xfs_log_priv.h | 1 + 2 files changed, 17 insertions(+), 5 deletions(-)fs/xfs/xfs_log_cil.c +1
-0@@ -91,12 +91,17 @@ xlog_cil_pcp_aggregate(for_each_online_cpu (cpu) { cilpcp =per_cpu_ptr (cil->xc_pcp, cpu); + ctx->ticket->t_curr_res += cilpcp->space_reserved;
fs/xfs/xfs_log_cil.c xlog_cil_pcp_aggregate( · line 104
Quoted 10 lines
fs/xfs/xfs_log_cil.c +4
-0+ ctx->ticket->t_unit_res += cilpcp->space_reserved; + cilpcp->space_reserved =0 ; +/* * We're in the middle of switching cil contexts. Reset the * counter we use to detect when the current context is nearing * full. */ cilpcp->space_used =0 ; +
Dumb nit: empty line at end of block.
--D
Quoted 67 lines
fs/xfs/xfs_log_cil.c +11
-5} }@@ -516,6 +521,7 @@ xlog_cil_insert_items(* based on how close we are to the hard limit. */ cilpcp =get_cpu_ptr (cil->xc_pcp); + cilpcp->space_reserved += ctx_res; cilpcp->space_used += len;if (space_used >=XLOG_CIL_SPACE_LIMIT (log) || cilpcp->space_used >@@ -526,10 +532,6 @@ xlog_cil_insert_items( }put_cpu_ptr (cilpcp); -spin_lock (&cil->xc_cil_lock); - ctx->ticket->t_unit_res += ctx_res; - ctx->ticket->t_curr_res += ctx_res; -/* * If we've overrun the reservation, dump the tx details before we move * the log items. Shutdown is imminent... @@ -551,6 +553,7 @@ xlog_cil_insert_items(* We do this here so we only need to take the CIL lock once during * the transaction commit. */ +spin_lock (&cil->xc_cil_lock);list_for_each_entry (lip, &tp->t_items, li_trans) {/* Skip items which aren't dirty in this transaction. */ @@ -1439,12 +1442,20 @@ xlog_cil_pcp_dead(spin_lock (&xlog_cil_pcp_lock);list_for_each_entry_safe (cil, n, &xlog_cil_pcp_list, xc_pcp_list) {struct xlog_cil_pcp *cilpcp =per_cpu_ptr (cil->xc_pcp, cpu); +struct xfs_cil_ctx *ctx;spin_unlock (&xlog_cil_pcp_lock);down_write (&cil->xc_ctx_lock); + ctx = cil->xc_ctx; + +atomic_add (cilpcp->space_used, &ctx->space_used); +if (ctx->ticket) { + ctx->ticket->t_curr_res += cilpcp->space_reserved; + ctx->ticket->t_unit_res += cilpcp->space_reserved; + } -atomic_add (cilpcp->space_used, &cil->xc_ctx->space_used); cilpcp->space_used =0 ; + cilpcp->space_reserved =0 ;up_write (&cil->xc_ctx_lock);spin_lock (&xlog_cil_pcp_lock);fs/xfs/xfs_log_priv.h +1
-0@@ -232,6 +232,7 @@ struct xfs_cil_ctx {*/ struct xlog_cil_pcp {uint32_t space_used; +uint32_t space_reserved;struct list_head busy_extents;struct list_head log_items; };Signature · 1 line
2.31.1
Re: [PATCH 30/39] xfs: implement percpu cil space used calculation
In reply to Dave ChinnerQuoted 7 lines · Dave Chinner
From: Dave Chinner <[email protected]>
Now that we have the CIL percpu structures in place, implement the space used counter with a fast sum check similar to the
percpu_counterinfrastructure.Signed-off-by Dave Chinner <[email protected]>
/me gets it now, so:
--D
Quoted 176 lines
--- fs/xfs/xfs_log_cil.c | 67 ++++++++++++++++++++++++++++++++++++++----- fs/xfs/xfs_log_priv.h | 3 +- 2 files changed, 62 insertions(+), 8 deletions(-)fs/xfs/xfs_log_cil.c +60
-7@@ -76,6 +76,30 @@ xlog_cil_ctx_alloc(void)return ctx; } +/* +* Aggregate the CIL per cpu structures into global counts, lists, etc and +* clear the percpu state ready for the next context to use. +*/ +static void +xlog_cil_pcp_aggregate ( +struct xfs_cil *cil, +struct xfs_cil_ctx *ctx) +{ +struct xlog_cil_pcp *cilpcp; +int cpu; + +for_each_online_cpu (cpu) { + cilpcp =per_cpu_ptr (cil->xc_pcp, cpu); + +/* +* We're in the middle of switching cil contexts. Reset the +* counter we use to detect when the current context is nearing +* full. +*/ + cilpcp->space_used =0 ; + } +} + static void xlog_cil_ctx_switch( struct xfs_cil *cil,@@ -433,6 +457,8 @@ xlog_cil_insert_items(struct xfs_log_item *lip;int len =0 ;int iovhdr_res =0 , split_res =0 , ctx_res =0 ; +int space_used; +struct xlog_cil_pcp *cilpcp;ASSERT (tp);@@ -469,8 +495,9 @@ xlog_cil_insert_items(* * This can steal more than we need, but that's OK. */ + space_used =atomic_read (&ctx->space_used);if (atomic_read (&cil->xc_iclog_hdrs) >0 || - ctx->space_used + len >=XLOG_CIL_BLOCKING_SPACE_LIMIT (log)) { + space_used + len >=XLOG_CIL_BLOCKING_SPACE_LIMIT (log)) {int split_res = log->l_iclog_hsize +sizeof (struct xlog_op_header );if (ctx_res)@@ -480,16 +507,34 @@ xlog_cil_insert_items(atomic_sub (tp->t_ticket->t_iclog_hdrs, &cil->xc_iclog_hdrs); } +/* +* Update the CIL percpu pointer. This updates the global counter when +* over the percpu batch size or when the CIL is over the space limit. +* This means low lock overhead for normal updates, and when over the +* limit the space used is immediately accounted. This makes enforcing +* the hard limit much more accurate. The per cpu fold threshold is +* based on how close we are to the hard limit. +*/ + cilpcp =get_cpu_ptr (cil->xc_pcp); + cilpcp->space_used += len; +if (space_used >=XLOG_CIL_SPACE_LIMIT (log) || + cilpcp->space_used > + ((XLOG_CIL_BLOCKING_SPACE_LIMIT (log) - space_used) / +num_online_cpus ())) { +atomic_add (cilpcp->space_used, &ctx->space_used); + cilpcp->space_used =0 ; + } +put_cpu_ptr (cilpcp); +spin_lock (&cil->xc_cil_lock); - tp->t_ticket->t_curr_res -= ctx_res + len; ctx->ticket->t_unit_res += ctx_res; ctx->ticket->t_curr_res += ctx_res; - ctx->space_used += len;/* * If we've overrun the reservation, dump the tx details before we move * the log items. Shutdown is imminent... */ + tp->t_ticket->t_curr_res -= ctx_res + len;if (WARN_ON (tp->t_ticket->t_curr_res <0 )) {xfs_warn (log->l_mp,"Transaction log reservation overrun:" ); xfs_warn(log->l_mp,@@ -846,6 +891,8 @@ xlog_cil_push_work(xfs_flush_bdev_async (&bio, log->l_mp->m_ddev_targp->bt_bdev, &bdev_flush); +xlog_cil_pcp_aggregate (cil, ctx); +/* * Pull all the log vectors off the items in the CIL, and remove the * items from the CIL. We don't need the CIL lock here because it's only @@ -1042,6 +1089,7 @@ xlog_cil_push_background( struct xlog *log) __releases(cil->xc_ctx_lock) {struct xfs_cil *cil = log->l_cilp; +int space_used =atomic_read (&cil->xc_ctx->space_used);/* * The cil won't be empty because we are called while holding the @@ -1054,7 +1102,7 @@ xlog_cil_push_background(* Don't do a background push if we haven't used up all the * space available yet. */ -if (cil->xc_ctx->space_used <XLOG_CIL_SPACE_LIMIT (log)) { +if (space_used <XLOG_CIL_SPACE_LIMIT (log)) {up_read (&cil->xc_ctx_lock);return ; }@@ -1083,10 +1131,10 @@ xlog_cil_push_background(* The ctx->xc_push_lock provides the serialisation necessary for safely * using the lockless waitqueue_active() check in this context. */ -if (cil->xc_ctx->space_used >=XLOG_CIL_BLOCKING_SPACE_LIMIT (log) || +if (space_used >=XLOG_CIL_BLOCKING_SPACE_LIMIT (log) ||waitqueue_active (&cil->xc_push_wait)) {trace_xfs_log_cil_wait (log, cil->xc_ctx->ticket); -ASSERT (cil->xc_ctx->space_used < log->l_logsize); +ASSERT (space_used < log->l_logsize);xlog_wait (&cil->xc_push_wait, &cil->xc_push_lock);return ; }@@ -1390,9 +1438,14 @@ xlog_cil_pcp_dead(spin_lock (&xlog_cil_pcp_lock);list_for_each_entry_safe (cil, n, &xlog_cil_pcp_list, xc_pcp_list) { +struct xlog_cil_pcp *cilpcp =per_cpu_ptr (cil->xc_pcp, cpu); +spin_unlock (&xlog_cil_pcp_lock);down_write (&cil->xc_ctx_lock); -/* move stuff on dead CPU to context */ + +atomic_add (cilpcp->space_used, &cil->xc_ctx->space_used); + cilpcp->space_used =0 ; +up_write (&cil->xc_ctx_lock);spin_lock (&xlog_cil_pcp_lock); }fs/xfs/xfs_log_priv.h +2
-1@@ -218,7 +218,7 @@ struct xfs_cil_ctx {xfs_lsn_t start_lsn;/* first LSN of chkpt commit */ xfs_lsn_t commit_lsn;/* chkpt commit record lsn */ struct xlog_ticket *ticket;/* chkpt ticket */ -int space_used;/* aggregate size of regions */ +atomic_t space_used;/* aggregate size of regions */ struct list_head busy_extents;/* busy extents in chkpt */ struct xfs_log_vec *lv_chain;/* logvecs being pushed */ struct list_head iclog_entry;@@ -231,6 +231,7 @@ struct xfs_cil_ctx {* Per-cpu CIL tracking items */ struct xlog_cil_pcp { +uint32_t space_used;struct list_head busy_extents;struct list_head log_items; };Signature · 1 line
2.31.1
Re: [PATCH 29/39] xfs: introduce per-cpu CIL tracking structure
In reply to Dave ChinnerQuoted 90 lines · Dave Chinner
From: Dave Chinner <[email protected]>
The CIL push lock is highly contended on larger machines, becoming a hard bottleneck that about 700,000 transaction commits/s on >16p machines. To address this, start moving the CIL tracking infrastructure to utilise per-CPU structures.
We need to track the space used, the amount of log reservation space reserved to write the CIL, the log items in the CIL and the busy extents that need to be completed by the CIL commit. This requires a couple of per-cpu counters, an unordered per-cpu list and a globally ordered per-cpu list.
Create a per-cpu structure to hold these and all the management interfaces needed, as well as the hooks to handle hotplug CPUs.
Signed-off-by Dave Chinner <[email protected]>--- fs/xfs/xfs_log_cil.c | 107 +++++++++++++++++++++++++++++++++++++ fs/xfs/xfs_log_priv.h | 13 +++++ include/linux/cpuhotplug.h | 1 + 3 files changed, 121 insertions(+)fs/xfs/xfs_log_cil.c +59
-0@@ -1369,6 +1369,106 @@ xfs_log_item_in_current_chkpt(return lip->li_seq == cil->xc_ctx->sequence; } +#ifdef CONFIG_HOTPLUG_CPU +static LIST_HEAD (xlog_cil_pcp_list); +static DEFINE_SPINLOCK (xlog_cil_pcp_lock); +static bool xlog_cil_pcp_init; + +/* +* Move dead percpu state to the relevant CIL context structures. +* +* We have to lock the CIL context here to ensure that nothing is modifying +* the percpu state, either addition or removal. Both of these are done under +* the CIL context lock, so grabbing that exclusively here will ensure we can +* safely drain the cilpcp for the CPU that is dying. +*/ +static int +xlog_cil_pcp_dead ( +unsigned int cpu) +{ +struct xfs_cil *cil, *n; + +spin_lock (&xlog_cil_pcp_lock); +list_for_each_entry_safe (cil, n, &xlog_cil_pcp_list, xc_pcp_list) { +spin_unlock (&xlog_cil_pcp_lock); +down_write (&cil->xc_ctx_lock); +/* move stuff on dead CPU to context */ +up_write (&cil->xc_ctx_lock); +spin_lock (&xlog_cil_pcp_lock); + } +spin_unlock (&xlog_cil_pcp_lock); +return 0 ; +} + +static int +xlog_cil_pcp_hpadd ( +struct xfs_cil *cil) +{ +if (!xlog_cil_pcp_init) { +int ret; + + ret =cpuhp_setup_state_nocalls (CPUHP_XFS_CIL_DEAD , +"xfs/cil_pcp:dead" ,NULL , + xlog_cil_pcp_dead); +if (ret <0 ) { +xfs_warn (cil->xc_log->l_mp, +"Failed to initialise CIL hotplug, error %d. XFS is non-functional." , + ret); +ASSERT (0 ); +return -ENOMEM ; + } + xlog_cil_pcp_init = true; + } + +INIT_LIST_HEAD (&cil->xc_pcp_list); +spin_lock (&xlog_cil_pcp_lock); +list_add (&cil->xc_pcp_list, &xlog_cil_pcp_list); +spin_unlock (&xlog_cil_pcp_lock); +return 0 ; +} + +static void
fs/xfs/xfs_log_cil.c xfs_log_item_in_current_chkpt( · line 1440
Quoted 10 lines
fs/xfs/xfs_log_cil.c +10
-0+xlog_cil_pcp_hpremove ( + struct xfs_cil *cil) +{ +spin_lock (&xlog_cil_pcp_lock); +list_del (&cil->xc_pcp_list); +spin_unlock (&xlog_cil_pcp_lock); +} + +#else /* !CONFIG_HOTPLUG_CPU */ +static inline void xlog_cil_pcp_hpadd (struct xfs_cil *cil) {}
The signature doesn't match the one above, which I think is why the kbuild robot complained.
Now that I've gotten my head wrapped around the percpu cil tracking structures, I think the set looks reasonable. I have some logistical questions about this very long series, but I'll ask them in a reply to the cover letter.
With the !HOTPLUG function signature fixed,
--D
Quoted 101 lines
fs/xfs/xfs_log_cil.c +38
-0+static inline void xlog_cil_pcp_hpremove (struct xfs_cil *cil) {} +#endif + +static void __percpu * +xlog_cil_pcp_alloc ( +struct xfs_cil *cil) +{ +void __percpu *pcp; + + pcp = alloc_percpu(struct xlog_cil_pcp); +if (!pcp) +return NULL ; + +if (xlog_cil_pcp_hpadd (cil) <0 ) { +free_percpu (pcp); +return NULL ; + } +return pcp; +} + +static void +xlog_cil_pcp_free ( +struct xfs_cil *cil, +void __percpu *pcp) +{ +if (!pcp) +return ; +xlog_cil_pcp_hpremove (cil); +free_percpu (pcp); +} +/* * Perform initial CIL structure initialisation. */ @@ -1383,6 +1483,12 @@ xlog_cil_init(if (!cil)return -ENOMEM ; + cil->xc_pcp =xlog_cil_pcp_alloc (cil); +if (!cil->xc_pcp) { +kmem_free (cil); +return -ENOMEM ; + } +INIT_LIST_HEAD (&cil->xc_cil);INIT_LIST_HEAD (&cil->xc_committing);spin_lock_init (&cil->xc_cil_lock);@@ -1413,6 +1519,7 @@ xlog_cil_destroy(ASSERT (list_empty (&cil->xc_cil));ASSERT (test_bit (XLOG_CIL_EMPTY , &cil->xc_flags)); +xlog_cil_pcp_free (cil, cil->xc_pcp);kmem_free (cil); }fs/xfs/xfs_log_priv.h +13
-0@@ -227,6 +227,14 @@ struct xfs_cil_ctx {struct work_struct push_work; }; +/* +* Per-cpu CIL tracking items +*/ +struct xlog_cil_pcp { +struct list_head busy_extents; +struct list_head log_items; +}; +/* * Committed Item List structure * @@ -260,6 +268,11 @@ struct xfs_cil {wait_queue_head_t xc_commit_wait;xfs_csn_t xc_current_sequence;wait_queue_head_t xc_push_wait;/* background push throttle */ + +void __percpu *xc_pcp;/* percpu CIL structures */ +#ifdef CONFIG_HOTPLUG_CPU +struct list_head xc_pcp_list; +#endif }____cacheline_aligned_in_smp ;/* xc_flags bit values */ include/linux/cpuhotplug.h +1
-0@@ -52,6 +52,7 @@ enum cpuhp_state {CPUHP_FS_BUFF_DEAD ,CPUHP_PRINTK_DEAD ,CPUHP_MM_MEMCQ_DEAD , +CPUHP_XFS_CIL_DEAD ,CPUHP_PERCPU_CNT_DEAD ,CPUHP_RADIX_DEAD , CPUHP_PAGE_ALLOC_DEAD,Signature · 1 line
2.31.1
Quoted 17 lines · Dave Chinner
Hi folks,
This is an update of the consolidated log scalability patchset I've been working on. Version 4 was posted here:
https://lore.kernel.org/linux-xfs/[email protected]/
This version contains the changes Darrick requested during review. The only patch remaining without at least one RVB tag is patch 30.
Performance improvements are largely documented in the change logs of the individual patches. Headline numbers are an increase in transaction rate from 700k commits/s to 1.7M commits/s, and a reduction in fua/flush operations by 2-3 orders of magnitude on metadata heavy workloads that don't use fsync.
Summary of series:
Quoted 7 lines
Patches Modifications
------- -------------
1-7: log write FUA/FLUSH optimisations
8: bug fix
9-11: Async CIL pushes
12-25:xlog_write()rework
26-39: CIL commit scalability
From this latest posting, I see that the first nine patches all have multiple reviews. Some of patches 10-19 have review tags split between Brian and Christoph, but neither have added them all the way through. I think I'm the only one who has supplied RVB tags for all forty.
So my question is: at what point would you like me to pull the segments of this patchset into upstream? "The maintainer reviewed everything" is of course our usual standard, but this touches a /lot/ of core logging code, and logging isn't one of my stronger areas of familiarity.
I think 1-8 look fine for 5.14. Do you want me to wait for Brian and/or Christoph (or really, any third pair of eyes) to finish working their way through 9-11 and 12-25 before merging them?
--D
Quoted 127 lines
Change log is below.
Cheers,
Dave.
Version 5:
- fix typo in comment (patch 4)
- fix typo in commit msg (patch 7)
- removed unnecessary update ofnum_iovecs(patch 20)
- fixed whitespace (patch 29)
- removed unused space_used/curr_res from CIL pcp structure (patch 29)
- addedspace_usedto CIL pcp structure (patch 30)
- add comment toxlog_cil_pcp_aggregate()(patch 30)
- addedspace_reservedto CIL pcp structure (patch 31)
- removed unnecessary commentary about CIL ordering issues from commit msg in patch 33 as patch 35 addresses these issues..
- fix whitespace inxlog_cil_free_logvec()(patch 35)
- fix weird sentence in docco (patch 39)
- propagate changes through patches to fix conflicts due to dependent changes. (various patches)Version 4:
- rebase on 5.13-rc2+
- fixed completion logic for async cache flush
- trimmed superflous comments about not requiringREQ_PREFLUSHfor iclog IO anymore.
- ensure that setting/clearingXLOG_ICL_NEED_FLUSHis atomic (i.e. only modified while holding the icloglock)
- ensure callers only add iclog flush/fua flags appropriately before releasing the iclog so that multiple independent writes to an iclog doesn't clear flags other writes into the iclog depend on.
- buffer log item dirty tracking patches merged so removed from series
- replacedXFS_LSN_CMP()checks with direct lsn1 == lsn2 comparisons to simplify the code
- changed "push_async" to "push_commit_stable" to indicate that the push caller wants the entire CIL checkpoint and commit record to be on stable storage when it completes.
- updated comment to indicate that iclog sync state is set according to the caller's desire for a stable checkpoint to be performed.
- Added comment explaining why the CIL workqueue is limited to 4 concurrent works per filesystem.
- debug overhead reduction patches merged so removed from series
- cleaned up a couple of typedef uses.
- updated pahole output for checkpoint header in commit message
- AddedBUILD_BUG_ON()to check the size of unmount records.
- got rid ofXFS_VOLUMEdefine.
- got rid ofXLOG_TIC_LEN_MAXdefine.
- cleaned up extra blank lines.
- fixed double initialisation of lv inxlog_write_single().
- removed the unnecessary change for reserved iclog space inxlog_state_get_iclog_space().
- no need to check forXLOG_CONTINUE_TRANSinxlog_write_partial()as it will always be set.
- added a patch for removing the optype parameter fromxlog_write()
- removed unused nvecs from structxfs_cil_ctx
- fixed whitespace damage inxlog_cil_pcp_dead()
- added missing cpu dead accounting transfer inxlog_cil_pcp_dead().
- factored out CIL push percpu structure aggregation intoxlog_cil_pcp_aggregate()
- added thectx->ticket->t_unit_resupdate back into the code even though it is largely unnecessary.
- cleaned up the pcp, cilpcp, pcptr mess inxlog_cil_pcp_alloc()and elsewhere to use variable names consistently.
- simplified the CIL sort comparison functions to a single comparison operation
- fixed percpu CIL item list sort order where items in the same transaction (order id) were reversed, leading to intents being replayed in the wrong order.
- split out log vector chain conversion tolist_headinto separate patch
- Updated documentation with all the fixes and suggestions made.Version 3:
- rebase onto 5.12-rc1+
- aggregate many small dependent patchsets in one large one.
- simplifyxlog_wait_on_iclog_lsn()back to just a call toxlog_wait_on_iclog()
- removexfs_blkdev_issue_flush()instead of moving and renaming it.
- pass bio toxfs_flush_bdev_async()so it doesn't need allocation.
- skip cache flush inxfs_flush_bdev_async()if the underlying queue does not require it.
- fixed whitespace inxfs_flush_bdev_async()
- remove the implicit external log's data device cache flush code and replace it with an explicit flush in the unmount record write so that it works the same as the new CIL checkpoint cache pre-flush mechanism. This mechanism now guarantees metadata vs journal ordering for both internal and external logs.
- updated various commit messages
- fixed incorrect/unintended changes toxfs_log_force()behaviour
- typedefuint64_txfs_csn_t; and conversion.
- removed stray trace_printk()s that were used for debugging.
- fixed minor formatting details.
- uninlinedxlog_prepare_iovec()
- fixed up "lv chain vector and size calculation" commit message to reflect we are only calculating and passin gin the vector byte count.
- reworked the loop inxlog_write_single()based on Christoph's suggestion. Much cleaner!
- added patch to pass log ticket down toxlog_sync()so that it accounts the roundoff to the log ticket rather than directly modifying grant heads. Grant heads are hot, so every little bit helps.
- added patch to update delayed logging design doc with background material on how transactions and log space accounting works in XFS.Version 2:
- fix ticket reservation roundoff to include 2 roundoffs
- removed stale copied comment from roundoff initialisation.
- clarified "separation" to mean "separation for ordering purposes" in commit message.
- added comment that newly activated, clean, empty iclogs have a LSN of 0 so are captured by the "iclog lsn <start_lsn" case that avoids needing to wait before releasing the commit iclog to be written.
- added async cache flush infrastructure
- convert CIL checkpoint push work it issue an unconditional metadata device cache flush rather than asking the first iclog write to issue it viaREQ_PREFLUSH.
- cleaned upxlog_write()to remove a redundant parameter and prepare the logic for setting flags on the iclog based on the type of operational data is being written to the log.
- addedXLOG_ICL_NEED_FUAflag to complement theNEED_FLUSHflag, allowing callers to issue explicit flushes and clear theNEED_FLUSHflag before the iclog is written without dropping theREQ_FUArequirement in/dev/null...
- added CIL commit-in-start-iclog optimisation that clears theNEED_FLUSHflag to avoid an unnecessary cache flush when issuing the iclog.
- fixed typo in CIL throttle bugfix comment.
- fixed trailing whitespace in commit message.
Re: [PATCH 06/39] xfs: remove need_start_rec parameter from xlog_write()
In reply to Dave ChinnerQuoted 10 lines · Dave Chinner
From: Dave Chinner <[email protected]>
The CIL push is the only call to
xlog_writethat sets this variable to true. The other callers don't need a start rec, and they tellxlog_writewhat to do by passing the type of ophdr they need written in the flags field. Theneed_start_recparameter essentially tellsxlog_writeto to write an extra ophdr with aXLOG_START_TRANStype, so get rid of the variable to do this and passXLOG_START_TRANSas the flag value intoxlog_write()from the CIL push.
Quoted 8 lines
$ size fs/xfs/xfs_log.o* text data bss dec hex filename 27595 560 8 28163 6e03 fs/xfs/xfs_log.o.orig 27454 560 8 28022 6d76 fs/xfs/xfs_log.o.patchedSigned-off-by Dave Chinner <[email protected]>Reviewed-by Chandan Babu R <[email protected]>Reviewed-by Darrick J. Wong <[email protected]>
Ok, looks ok
Quoted 188 lines
--- fs/xfs/xfs_log.c | 44 +++++++++++++++++++++---------------------- fs/xfs/xfs_log_cil.c | 3 ++- fs/xfs/xfs_log_priv.h | 3 +-- 3 files changed, 25 insertions(+), 25 deletions(-)fs/xfs/xfs_log.c +22
-22@@ -820,9 +820,7 @@ xlog_wait_on_iclog(static int xlog_write_unmount_record (struct xlog *log, -struct xlog_ticket *ticket, -xfs_lsn_t *lsn, -uint flags) +struct xlog_ticket *ticket) {struct xfs_unmount_log_format ulf = { .magic =XLOG_UNMOUNT_TYPE ,@@ -839,7 +837,7 @@ xlog_write_unmount_record(/* account for space used by record data */ ticket->t_curr_res -=sizeof (ulf); -return xlog_write (log, &vec, ticket, lsn,NULL , flags, false); +return xlog_write (log, &vec, ticket,NULL ,NULL ,XLOG_UNMOUNT_TRANS ); }/* @@ -853,15 +851,13 @@ xlog_unmount_write(struct xfs_mount *mp = log->l_mp;struct xlog_in_core *iclog;struct xlog_ticket *tic =NULL ; -xfs_lsn_t lsn; -uint flags =XLOG_UNMOUNT_TRANS ;int error; error =xfs_log_reserve (mp,600 ,1 , &tic,XFS_LOG ,0 );if (error) goto out_err; - error =xlog_write_unmount_record (log, tic, &lsn, flags); + error =xlog_write_unmount_record (log, tic);/* * At this point, we're umounting anyway, so there's no point in * transitioning log state to IOERROR. Just continue... @@ -1553,8 +1549,7 @@ xlog_commit_record(if (XLOG_FORCED_SHUTDOWN (log))return -EIO ; - error =xlog_write (log, &vec, ticket, lsn, iclog,XLOG_COMMIT_TRANS , - false); + error =xlog_write (log, &vec, ticket, lsn, iclog,XLOG_COMMIT_TRANS );if (error)xfs_force_shutdown (log->l_mp,SHUTDOWN_LOG_IO_ERROR );return error;@@ -2151,13 +2146,16 @@ static intxlog_write_calc_vec_length ( struct xlog_ticket *ticket, struct xfs_log_vec *log_vector, - bool need_start_rec) + uint optype) { struct xfs_log_vec *lv; -int headers = need_start_rec ?1 :0 ; +int headers =0 ;int len =0 ;int i; +if (optype &XLOG_START_TRANS ) + headers++; +for (lv = log_vector; lv; lv = lv->lv_next) {/* we don't write ordered log vectors */ if (lv->lv_buf_len ==XFS_LOG_VEC_ORDERED )@@ -2377,8 +2375,7 @@ xlog_write(struct xlog_ticket *ticket, xfs_lsn_t *start_lsn, struct xlog_in_core **commit_iclog, - uint flags, - bool need_start_rec) + uint optype) { struct xlog_in_core *iclog = NULL;struct xfs_log_vec *lv = log_vector;@@ -2406,8 +2403,9 @@ xlog_write(xfs_force_shutdown (log->l_mp,SHUTDOWN_LOG_IO_ERROR ); } - len =xlog_write_calc_vec_length (ticket, log_vector, need_start_rec); - *start_lsn =0 ; + len =xlog_write_calc_vec_length (ticket, log_vector, optype); +if (start_lsn) + *start_lsn =0 ;while (lv && (!lv->lv_niovecs || index < lv->lv_niovecs)) {void *ptr;int log_offset;@@ -2421,7 +2419,7 @@ xlog_write( ptr = iclog->ic_datap + log_offset;/* start_lsn is the first lsn written to. That's all we need. */ -if (!*start_lsn) +if (start_lsn && !*start_lsn) *start_lsn =be64_to_cpu (iclog->ic_header.h_lsn);/* @@ -2434,6 +2432,7 @@ xlog_write(int copy_len;int copy_off;bool ordered = false; +bool wrote_start_rec = false;/* ordered log vectors have no regions to write */ if (lv->lv_buf_len ==XFS_LOG_VEC_ORDERED ) {@@ -2451,13 +2450,15 @@ xlog_write(* write a start record. Only do this for the first * iclog we write to. */ -if (need_start_rec) { +if (optype &XLOG_START_TRANS ) {xlog_write_start_rec (ptr, ticket);xlog_write_adv_cnt (&ptr, &len, &log_offset,sizeof (struct xlog_op_header )); + optype &= ~XLOG_START_TRANS ; + wrote_start_rec = true; } - ophdr =xlog_write_setup_ophdr (log, ptr, ticket, flags); + ophdr =xlog_write_setup_ophdr (log, ptr, ticket, optype);if (!ophdr)return -EIO ;@@ -2488,14 +2489,13 @@ xlog_write( } copy_len +=sizeof (struct xlog_op_header ); record_cnt++; -if (need_start_rec) { +if (wrote_start_rec) { copy_len +=sizeof (struct xlog_op_header ); record_cnt++; - need_start_rec = false; } data_cnt += contwr ? copy_len :0 ; - error = xlog_write_copy_finish(log, iclog, flags, + error = xlog_write_copy_finish(log, iclog, optype, &record_cnt, &data_cnt, &partial_copy, &partial_copy_len,@@ -2539,7 +2539,7 @@ xlog_write(spin_lock (&log->l_icloglock);xlog_state_finish_copy (log, iclog, record_cnt, data_cnt);if (commit_iclog) { -ASSERT (flags &XLOG_COMMIT_TRANS ); +ASSERT (optype &XLOG_COMMIT_TRANS ); *commit_iclog = iclog; }else { error =xlog_state_release_iclog (log, iclog);fs/xfs/xfs_log_cil.c +2
-1@@ -823,7 +823,8 @@ xlog_cil_push_work(*/ wait_for_completion (&bdev_flush); - error =xlog_write (log, &lvhdr, tic, &ctx->start_lsn,NULL ,0 , true); + error =xlog_write (log, &lvhdr, tic, &ctx->start_lsn,NULL , +XLOG_START_TRANS );if (error) goto out_abort_free_ticket;fs/xfs/xfs_log_priv.h +1
-2@@ -480,8 +480,7 @@ void xlog_print_tic_res(struct xfs_mount *mp, struct xlog_ticket *ticket);void xlog_print_trans (struct xfs_trans *);int xlog_write (struct xlog *log,struct xfs_log_vec *log_vector,struct xlog_ticket *tic,xfs_lsn_t *start_lsn, -struct xlog_in_core **commit_iclog,uint flags, -bool need_start_rec); +struct xlog_in_core **commit_iclog,uint optype);int xlog_commit_record (struct xlog *log,struct xlog_ticket *ticket,struct xlog_in_core **iclog,xfs_lsn_t *lsn);void xfs_log_ticket_ungrant (struct xlog *log,struct xlog_ticket *ticket);
Re: [PATCH 07/39] xfs: journal IO cache flush reductions
In reply to Dave ChinnerQuoted 123 lines · Dave Chinner
From: Dave Chinner <[email protected]>
Currently every journal IO is issued as
REQ_PREFLUSH|REQ_FUAto guarantee the ordering requirements the journal has w.r.t. metadata writeback. THe two ordering constraints are:1. we cannot overwrite metadata in the journal until we guarantee that the dirty metadata has been written back in place and is stable.
2. we cannot write back dirty metadata until it has been written to the journal and guaranteed to be stable (and hence recoverable) in the journal.
The ordering guarantees of #1 are provided by
REQ_PREFLUSH. This causes the journal IO to issue a cache flush and wait for it to complete before issuing the write IO to the journal. Hence all completed metadata IO is guaranteed to be stable before the journal overwrites the old metadata.The ordering guarantees of #2 are provided by the
REQ_FUA, which ensures the journal writes do not complete until they are on stable storage. Hence by the time the last journal IO in a checkpoint completes, we know that the entire checkpoint is on stable storage and we can unpin the dirty metadata and allow it to be written back.This is the mechanism by which ordering was first implemented in XFS way back in 2002 by commit
95d97c36e5155075ba2eb22b17562cfcc53fcf96("Add support for drive write cache flushing") in the xfs-archive tree.A lot has changed since then, most notably we now use delayed logging to checkpoint the filesystem to the journal rather than write each individual transaction to the journal. Cache flushes on journal IO are necessary when individual transactions are wholly contained within a single iclog. However, CIL checkpoints are single transactions that typically span hundreds to thousands of individual journal writes, and so the requirements for device cache flushing have changed.
That is, the ordering rules I state above apply to ordering of atomic transactions recorded in the journal, not to the journal IO itself. Hence we need to ensure metadata is stable before we start writing a new transaction to the journal (guarantee #1), and we need to ensure the entire transaction is stable in the journal before we start metadata writeback (guarantee #2).
Hence we only need a
REQ_PREFLUSHon the journal IO that starts a new journal transaction to provide #1, and it is not on any other journal IO done within the context of that journal transaction.The CIL checkpoint already issues a cache flush before it starts writing to the log, so we no longer need the iclog IO to issue a
REQ_REFLUSHfor us. Hence ifXLOG_START_TRANSis passed toxlog_write(), we no longer need to mark the first iclog in the log write withREQ_PREFLUSHfor this case. As an added bonus, this ordering mechanism works for both internal and external logs, meaning we can remove the explicit data device cache flushes from the iclog write code when using external logs.Given the new ordering semantics of commit records for the CIL, we need iclogs containing commit records to issue a
REQ_PREFLUSH. We also require unmount records to do this. Hence for bothXLOG_COMMIT_TRANSandXLOG_UNMOUNT_TRANSxlog_write()calls we need to mark the first iclog being written withREQ_PREFLUSH.For both commit records and unmount records, we also want them immediately on stable storage, so we want to also mark the iclogs that contain these records to be marked
REQ_FUA. That means if a record is split across multiple iclogs, they are all markedREQ_FUAand not just the last one so that when the transaction is completed all the parts of the record are on stable storage.And for external logs, unmount records need a pre-write data device cache flush similar to the CIL checkpoint cache pre-flush as the internal iclog write code does not do this implicitly anymore.
As an optimisation, when the commit record lands in the same iclog as the journal transaction starts, we don't need to wait for anything and can simply use
REQ_FUAto provide guarantee #2. This means that forfsync()heavy workloads, the cache flush behaviour is completely unchanged and there is no degradation in performance as a result of optimise the multi-IO transaction case.The most notable sign that there is less IO latency on my test machine (nvme SSDs) is that the "noiclogs" rate has dropped substantially. This metric indicates that the CIL push is blocking in
xlog_get_iclog_space()waiting for iclog IO completion to occur. With 8 iclogs of 256kB, the rate is appoximately 1 noiclog event to every 4 iclog writes. IOWs, every 4th call toxlog_get_iclog_space()is blocking waiting for log IO. With the changes in this patch, this drops to 1 noiclog event for every 100 iclog writes. Hence it is clear that log IO is completing much faster than it was previously, but it is also clear that for large iclog sizes, this isn't the performance limiting factor on this hardware.With smaller iclogs (32kB), however, there is a substantial difference. With the cache flush modifications, the journal is now running at over 4000 write IOPS, and the journal throughput is largely identical to the 256kB iclogs and the noiclog event rate stays low at about 1:50 iclog writes. The existing code tops out at about 2500 IOPS as the number of cache flushes dominate performance and latency. The noiclog event rate is about 1:4, and the performance variance is quite large as the journal throughput can fall to less than half the peak sustained rate when the cache flush rate prevents metadata writeback from keeping up and the log runs out of space and throttles reservations.
As a result:
logbsize fsmark create rate rm -rf
before 32kb 152851+/-5.3e+04 5m28s
patched 32kb 221533+/-1.1e+04 5m24sbefore 256kb 220239+/-6.2e+03 4m58s
patched 256kb 228286+/-9.2e+03 5m06sThe rm -rf times are included because I ran them, but the differences are largely noise. This workload is largely metadata read IO latency bound and the changes to the journal cache flushing doesn't really make any noticable difference to behaviour apart from a reduction in noiclog events from background CIL pushing.
Quoted 3 lines
Signed-off-by Dave Chinner <[email protected]>Reviewed-by Chandan Babu R <[email protected]>Reviewed-by Darrick J. Wong <[email protected]>
Ok, I followed it through and it makes sense. Thanks for the thorough explaination
Quoted 228 lines
--- fs/xfs/xfs_log.c | 66 +++++++++++++++---------------------------- fs/xfs/xfs_log.h | 1 - fs/xfs/xfs_log_cil.c | 18 +++++++++--- fs/xfs/xfs_log_priv.h | 6 ++++ 4 files changed, 43 insertions(+), 48 deletions(-)fs/xfs/xfs_log.c +23
-43@@ -513,7 +513,7 @@ __xlog_state_release_iclog(* Flush iclog to disk if this is the last reference to the given iclog and the * it is in the WANT_SYNC state. */ -static int +int xlog_state_release_iclog (struct xlog *log,struct xlog_in_core *iclog)@@ -533,23 +533,6 @@ xlog_state_release_iclog(return 0 ; } -void -xfs_log_release_iclog ( -struct xlog_in_core *iclog) -{ -struct xlog *log = iclog->ic_log; -bool sync = false; - -if (atomic_dec_and_lock (&iclog->ic_refcnt, &log->l_icloglock)) { -if (iclog->ic_state !=XLOG_STATE_IOERROR ) - sync =__xlog_state_release_iclog (log, iclog); -spin_unlock (&log->l_icloglock); - } - -if (sync) -xlog_sync (log, iclog); -} -/* * Mount a log filesystem * @@ -837,6 +820,14 @@ xlog_write_unmount_record(/* account for space used by record data */ ticket->t_curr_res -=sizeof (ulf); + +/* +* For external log devices, we need to flush the data device cache +* first to ensure all metadata writeback is on stable storage before we +* stamp the tail LSN into the unmount record. +*/ +if (log->l_targ != log->l_mp->m_ddev_targp) +blkdev_issue_flush (log->l_targ->bt_bdev);return xlog_write (log, &vec, ticket,NULL ,NULL ,XLOG_UNMOUNT_TRANS ); }@@ -874,6 +865,11 @@ xlog_unmount_write(else ASSERT (iclog->ic_state ==XLOG_STATE_WANT_SYNC || iclog->ic_state ==XLOG_STATE_IOERROR ); +/* +* Ensure the journal is fully flushed and on stable storage once the +* iclog containing the unmount record is written. +*/ + iclog->ic_flags |= (XLOG_ICL_NEED_FLUSH |XLOG_ICL_NEED_FUA ); error =xlog_state_release_iclog (log, iclog);xlog_wait_on_iclog (iclog);@@ -1755,8 +1751,7 @@ xlog_write_iclog(struct xlog *log, struct xlog_in_core *iclog, uint64_t bno, - unsigned int count, - bool need_flush) + unsigned int count) { ASSERT(bno < log->l_logBBsize);@@ -1794,10 +1789,12 @@ xlog_write_iclog(* writeback throttle from throttling log writes behind background * metadata writeback and causing priority inversions. */ - iclog->ic_bio.bi_opf =REQ_OP_WRITE |REQ_META |REQ_SYNC | -REQ_IDLE |REQ_FUA ; -if (need_flush) + iclog->ic_bio.bi_opf =REQ_OP_WRITE |REQ_META |REQ_SYNC |REQ_IDLE ; +if (iclog->ic_flags &XLOG_ICL_NEED_FLUSH ) iclog->ic_bio.bi_opf |=REQ_PREFLUSH ; +if (iclog->ic_flags &XLOG_ICL_NEED_FUA ) + iclog->ic_bio.bi_opf |=REQ_FUA ; + iclog->ic_flags &= ~(XLOG_ICL_NEED_FLUSH |XLOG_ICL_NEED_FUA );if (xlog_map_iclog_data (&iclog->ic_bio, iclog->ic_data, count)) {xfs_force_shutdown (log->l_mp,SHUTDOWN_LOG_IO_ERROR );@@ -1900,7 +1897,6 @@ xlog_sync(unsigned int roundoff;/* roundoff to BB or stripe */ uint64_t bno;unsigned int size; -bool need_flush = true, split = false;ASSERT (atomic_read (&iclog->ic_refcnt) ==0 );@@ -1925,10 +1921,8 @@ xlog_sync( bno =BLOCK_LSN (be64_to_cpu (iclog->ic_header.h_lsn));/* Do we need to split this write into 2 parts? */ -if (bno +BTOBB (count) > log->l_logBBsize) { +if (bno +BTOBB (count) > log->l_logBBsize)xlog_split_iclog (log, &iclog->ic_header, bno, count); - split = true; - }/* calculcate the checksum */ iclog->ic_header.h_crc = xlog_cksum(log, &iclog->ic_header,@@ -1949,22 +1943,8 @@ xlog_sync( be64_to_cpu(iclog->ic_header.h_lsn)); }#endif - -/* -* Flush the data device before flushing the log to make sure all meta -* data written back from the AIL actually made it to disk before -* stamping the new log tail LSN into the log buffer. For an external -* log we need to issue the flush explicitly, and unfortunately -* synchronously here; for an internal log we can simply use the block -* layer state machine for preflushes. -*/ -if (log->l_targ != log->l_mp->m_ddev_targp || split) { -blkdev_issue_flush (log->l_mp->m_ddev_targp->bt_bdev); - need_flush = false; - } -xlog_verify_iclog (log, iclog, count); -xlog_write_iclog (log, iclog, bno, count, need_flush); +xlog_write_iclog (log, iclog, bno, count); }/* @@ -2418,7 +2398,7 @@ xlog_write(ASSERT (log_offset <= iclog->ic_size -1 ); ptr = iclog->ic_datap + log_offset; -/* start_lsn is the first lsn written to. That's all we need. */ +/* Start_lsn is the first lsn written to. */ if (start_lsn && !*start_lsn) *start_lsn =be64_to_cpu (iclog->ic_header.h_lsn);fs/xfs/xfs_log.h +0
-1@@ -117,7 +117,6 @@ void xfs_log_mount_cancel(struct xfs_mount *);xfs_lsn_t xlog_assign_tail_lsn (struct xfs_mount *mp);xfs_lsn_t xlog_assign_tail_lsn_locked (struct xfs_mount *mp);void xfs_log_space_wake (struct xfs_mount *mp); -void xfs_log_release_iclog (struct xlog_in_core *iclog); int xfs_log_reserve(struct xfs_mount *mp, int length, int count,fs/xfs/xfs_log_cil.c +14
-4@@ -890,15 +890,25 @@ xlog_cil_push_work(/* * If the checkpoint spans multiple iclogs, wait for all previous -* iclogs to complete before we submit the commit_iclog. +* iclogs to complete before we submit the commit_iclog. In this case, +* the commit_iclog write needs to issue a pre-flush so that the +* ordering is correctly preserved down to stable storage. */ +spin_lock (&log->l_icloglock);if (ctx->start_lsn != commit_lsn) { -spin_lock (&log->l_icloglock);xlog_wait_on_iclog (commit_iclog->ic_prev); +spin_lock (&log->l_icloglock); + commit_iclog->ic_flags |=XLOG_ICL_NEED_FLUSH ; } -/* release the hounds! */ -xfs_log_release_iclog (commit_iclog); +/* +* The commit iclog must be written to stable storage to guarantee +* journal IO vs metadata writeback IO is correctly ordered on stable +* storage. +*/ + commit_iclog->ic_flags |=XLOG_ICL_NEED_FUA ; +xlog_state_release_iclog (log, commit_iclog); +spin_unlock (&log->l_icloglock);return ; out_skip:fs/xfs/xfs_log_priv.h +6
-0@@ -133,6 +133,9 @@ enum xlog_iclog_state {#define XLOG_COVER_OPS 5 +#define XLOG_ICL_NEED_FLUSH (1 << 0)/* iclog needs REQ_PREFLUSH */ +#define XLOG_ICL_NEED_FUA (1 << 1)/* iclog needs REQ_FUA */ +/* Ticket reservation region accounting */ #define XLOG_TIC_LEN_MAX 15@@ -201,6 +204,7 @@ typedef struct xlog_in_core {u32 ic_size;u32 ic_offset;enum xlog_iclog_state ic_state; +unsigned int ic_flags;char *ic_datap;/* pointer to iclog data */ /* Callback structures need their own cacheline */ @@ -486,6 +490,8 @@ int xlog_commit_record(struct xlog *log, struct xlog_ticket *ticket,void xfs_log_ticket_ungrant (struct xlog *log,struct xlog_ticket *ticket);void xfs_log_ticket_regrant (struct xlog *log,struct xlog_ticket *ticket); +int xlog_state_release_iclog (struct xlog *log,struct xlog_in_core *iclog); +/* * When we crack an atomic LSN, we sample it first so that the value will not * change while we are cracking it into the component values. This means we
Re: [PATCH 08/39] xfs: Fix CIL throttle hang when CIL space used going backwards
In reply to Dave ChinnerQuoted 86 lines · Dave Chinner
From: Dave Chinner <[email protected]>
A hang with tasks stuck on the CIL hard throttle was reported and largely diagnosed by Donald Buczek, who discovered that it was a result of the CIL context space usage decrementing in committed transactions once the hard throttle limit had been hit and processes were already blocked. This resulted in the CIL push not waking up those waiters because the CIL context was no longer over the hard throttle limit.
The surprising aspect of this was the CIL space usage going backwards regularly enough to trigger this situation. Assumptions had been made in design that the relogging process would only increase the size of the objects in the CIL, and so that space would only increase.
This change and commit message fixes the issue and documents the result of an audit of the triggers that can cause the CIL space to go backwards, how large the backwards steps tend to be, the frequency in which they occur, and what the impact on the CIL accounting code is.
Even though the CIL
ctx->space_usedcan go backwards, it will only do so if the log item is already logged to the CIL and contains a space reservation for it's entire logged state. This is tracked by the shadow buffer state on the log item. If the item is not previously logged in the CIL it has no shadow buffer nor log vector, and hence the entire size of the logged item copied to the log vector is accounted to the CIL space usage. i.e. it will always go up in this case.If the item has a log vector (i.e. already in the CIL) and the size decreases, then the existing log vector will be overwritten and the space usage will go down. This is the only condition where the space usage reduces, and it can only occur when an item is already tracked in the CIL. Hence we are safe from CIL space usage underruns as a result of log items decreasing in size when they are relogged.
Typically this reduction in CIL usage occurs from metadata blocks being free, such as when a btree block merge occurs or a directory enter/xattr entry is removed and the da-tree is reduced in size. This generally results in a reduction in size of around a single block in the CIL, but also tends to increase the number of log vectors because the parent and sibling nodes in the tree needs to be updated when a btree block is removed. If a multi-level merge occurs, then we see reduction in size of 2+ blocks, but again the log vector count goes up.
The other vector is inode fork size changes, which only log the current size of the fork and ignore the previously logged size when the fork is relogged. Hence if we are removing items from the inode fork (dir/xattr removal in shortform, extent record removal in extent form, etc) the relogged size of the inode for can decrease.
No other log items can decrease in size either because they are a fixed size (e.g. dquots) or they cannot be relogged (e.g. relogging an intent actually creates a new intent log item and doesn't relog the old item at all.) Hence the only two vectors for CIL context size reduction are relogging inode forks and marking buffers active in the CIL as stale.
Long story short: the majority of the code does the right thing and handles the reduction in log item size correctly, and only the CIL hard throttle implementation is problematic and needs fixing. This patch makes that fix, as well as adds comments in the log item code that result in items shrinking in size when they are relogged as a clear reminder that this can and does happen frequently.
The throttle fix is based upon the change Donald proposed, though it goes further to ensure that once the throttle is activated, it captures all tasks until the CIL push issues a wakeup, regardless of whether the CIL space used has gone back under the throttle threshold.
This ensures that we prevent tasks reducing the CIL slightly under the throttle threshold and then making more changes that push it well over the throttle limit. This is acheived by checking if the throttle wait queue is already active as a condition of throttling. Hence once we start throttling, we continue to apply the throttle until the CIL context push wakes everything on the wait queue.
We can use
waitqueue_active()for the waitqueue manipulations and checks as they are all done under thectx->xc_push_lock. Hence the waitqueue has external serialisation and we can safely peek inside the wait queue without holding the internal waitqueue locks.
Quoted 8 lines
Many thanks to Donald for his diagnostic and analysis work to isolate the cause of this hang.
Reported-and-tested-by Donald Buczek <[email protected]>Signed-off-by Dave Chinner <[email protected]>Reviewed-by Brian Foster <[email protected]>Reviewed-by Chandan Babu R <[email protected]>Reviewed-by Darrick J. Wong <[email protected]>
Ok, makes sense. Thanks for all the commentary
Quoted 158 lines
--- fs/xfs/xfs_buf_item.c | 37 ++++++++++++++++++------------------- fs/xfs/xfs_inode_item.c | 14 ++++++++++++++ fs/xfs/xfs_log_cil.c | 22 +++++++++++++++++----- 3 files changed, 49 insertions(+), 24 deletions(-)fs/xfs/xfs_buf_item.c +18
-19@@ -74,14 +74,12 @@ xfs_buf_item_straddle( }/* -* This returns the number of log iovecs needed to log the -* given buf log item. +* Return the number of log iovecs and space needed to log the given buf log +* item segment. * -* It calculates this as 1 iovec for the buf log format structure -* and 1 for each stretch of non-contiguous chunks to be logged. -* Contiguous chunks are logged in a single iovec. -* -* If the XFS_BLI_STALE flag has been set, then log nothing. +* It calculates this as 1 iovec for the buf log format structure and 1 for each +* stretch of non-contiguous chunks to be logged. Contiguous chunks are logged +* in a single iovec. */ STATIC void xfs_buf_item_size_segment(@@ -168,11 +166,8 @@ xfs_buf_item_size_segment( }/* -* This returns the number of log iovecs needed to log the given buf log item. -* -* It calculates this as 1 iovec for the buf log format structure and 1 for each -* stretch of non-contiguous chunks to be logged. Contiguous chunks are logged -* in a single iovec. +* Return the number of log iovecs and space needed to log the given buf log +* item. * * Discontiguous buffers need a format structure per region that is being * logged. This makes the changes in the buffer appear to log recovery as though @@ -182,7 +177,11 @@ xfs_buf_item_size_segment(* what ends up on disk. * * If the XFS_BLI_STALE flag has been set, then log nothing but the buf log -* format structures. +* format structures. If the item has previously been logged and has dirty +* regions, we do not relog them in stale buffers. This has the effect of +* reducing the size of the relogged item by the amount of dirty data tracked +* by the log item. This can result in the committing transaction reducing the +* amount of space being consumed by the CIL. */ STATIC void xfs_buf_item_size(@@ -199,9 +198,9 @@ xfs_buf_item_size(ASSERT (atomic_read (&bip->bli_refcount) >0 );if (bip->bli_flags &XFS_BLI_STALE ) {/* -* The buffer is stale, so all we need to log -* is the buf log format structure with the -* cancel flag in it. +* The buffer is stale, so all we need to log is the buf log +* format structure with the cancel flag in it as we are never +* going to replay the changes tracked in the log item. */ trace_xfs_buf_item_size_stale (bip);ASSERT (bip->__bli_format.blf_flags &XFS_BLF_CANCEL );@@ -216,9 +215,9 @@ xfs_buf_item_size(if (bip->bli_flags &XFS_BLI_ORDERED ) {/* -* The buffer has been logged just to order it. -* It is not being included in the transaction -* commit, so no vectors are used at all. +* The buffer has been logged just to order it. It is not being +* included in the transaction commit, so no vectors are used at +* all. */ trace_xfs_buf_item_size_ordered (bip); *nvecs =XFS_LOG_VEC_ORDERED ;fs/xfs/xfs_inode_item.c +14
-0@@ -28,6 +28,20 @@ static inline struct xfs_inode_log_item *INODE_ITEM(struct xfs_log_item *lip) return container_of(lip, struct xfs_inode_log_item, ili_item); } +/* +* The logged size of an inode fork is always the current size of the inode +* fork. This means that when an inode fork is relogged, the size of the logged +* region is determined by the current state, not the combination of the +* previously logged state + the current state. This is different relogging +* behaviour to most other log items which will retain the size of the +* previously logged changes when smaller regions are relogged. +* +* Hence operations that remove data from the inode fork (e.g. shortform +* dir/attr remove, extent form extent removal, etc), the size of the relogged +* inode gets -smaller- rather than stays the same size as the previously logged +* size and this can result in the committing transaction reducing the amount of +* space being consumed by the CIL. +*/ STATIC void xfs_inode_item_data_fork_size( struct xfs_inode_log_item *iip,fs/xfs/xfs_log_cil.c +17
-5@@ -670,9 +670,14 @@ xlog_cil_push_work(ASSERT (push_seq <= ctx->sequence);/* -* Wake up any background push waiters now this context is being pushed. +* As we are about to switch to a new, empty CIL context, we no longer +* need to throttle tasks on CIL space overruns. Wake any waiters that +* the hard push throttle may have caught so they can start committing +* to the new context. The ctx->xc_push_lock provides the serialisation +* necessary for safely using the lockless waitqueue_active() check in +* this context. */ -if (ctx->space_used >=XLOG_CIL_BLOCKING_SPACE_LIMIT (log)) +if (waitqueue_active (&cil->xc_push_wait))wake_up_all (&cil->xc_push_wait);/* @@ -944,7 +949,7 @@ xlog_cil_push_background(ASSERT (!list_empty (&cil->xc_cil));/* -* don't do a background push if we haven't used up all the +* Don't do a background push if we haven't used up all the * space available yet. */ if (cil->xc_ctx->space_used <XLOG_CIL_SPACE_LIMIT (log)) {@@ -968,9 +973,16 @@ xlog_cil_push_background(/* * If we are well over the space limit, throttle the work that is being -* done until the push work on this context has begun. +* done until the push work on this context has begun. Enforce the hard +* throttle on all transaction commits once it has been activated, even +* if the committing transactions have resulted in the space usage +* dipping back down under the hard limit. +* +* The ctx->xc_push_lock provides the serialisation necessary for safely +* using the lockless waitqueue_active() check in this context. */ -if (cil->xc_ctx->space_used >=XLOG_CIL_BLOCKING_SPACE_LIMIT (log)) { +if (cil->xc_ctx->space_used >=XLOG_CIL_BLOCKING_SPACE_LIMIT (log) || +waitqueue_active (&cil->xc_push_wait)) {trace_xfs_log_cil_wait (log, cil->xc_ctx->ticket);ASSERT (cil->xc_ctx->space_used < log->l_logsize);xlog_wait (&cil->xc_push_wait, &cil->xc_push_lock);
Re: [PATCH 09/39] xfs: xfs_log_force_lsn isn't passed a LSN
In reply to Dave ChinnerQuoted 30 lines · Dave Chinner
From: Dave Chinner <[email protected]>
In doing an investigation into AIL push stalls, I was looking at the log force code to see if an async CIL push could be done instead. This lead me to
xfs_log_force_lsn()and looking at how it works.
xfs_log_force_lsn()is only called from inode synchronisation contexts such asfsync(), and it takes theip->i_itemp->ili_last_lsnvalue as the LSN to sync the log to. This gets passed toxlog_cil_force_lsn()viaxfs_log_force_lsn()to flush the CIL to the journal, and then used byxfs_log_force_lsn()to flush the iclogs to the journal.The problem is that
ip->i_itemp->ili_last_lsndoes not store a log sequence number. What it stores is passed to it from the ->iop_committing method, which is called byxfs_log_commit_cil(). The value this passes to theiop_committingmethod is the CIL context sequence number that the item was committed to.As it turns out,
xlog_cil_force_lsn()converts the sequence to an actual commit LSN for the related context and returns that toxfs_log_force_lsn().xfs_log_force_lsn()overwrites it's "lsn" variable that contained a sequence with an actual LSN and then uses that to sync the iclogs.This caused me some confusion for a while, even though I originally wrote all this code a decade ago. ->iop_committing is only used by a couple of log item types, and only inode items use the sequence number it is passed.
Quoted 8 lines
Let's clean up the API, CIL structures and inode log item to call it a sequence number, and make it clear that the high level code is using CIL sequence numbers and not on-disk LSNs for integrity synchronisation purposes.
Signed-off-by Dave Chinner <[email protected]>Reviewed-by Brian Foster <[email protected]>Reviewed-by Darrick J. Wong <[email protected]>
Ok, looks like a nice clean up
Quoted 444 lines
--- fs/xfs/libxfs/xfs_types.h | 1 + fs/xfs/xfs_buf_item.c | 2 +- fs/xfs/xfs_dquot_item.c | 2 +- fs/xfs/xfs_file.c | 14 +++++++------- fs/xfs/xfs_inode.c | 10 +++++----- fs/xfs/xfs_inode_item.c | 4 ++-- fs/xfs/xfs_inode_item.h | 2 +- fs/xfs/xfs_log.c | 27 ++++++++++++++------------- fs/xfs/xfs_log.h | 4 +--- fs/xfs/xfs_log_cil.c | 30 +++++++++++------------------- fs/xfs/xfs_log_priv.h | 15 +++++++-------- fs/xfs/xfs_trans.c | 6 +++--- fs/xfs/xfs_trans.h | 4 ++-- 13 files changed, 56 insertions(+), 65 deletions(-)fs/xfs/libxfs/xfs_types.h +1
-0@@ -21,6 +21,7 @@ typedef int32_t xfs_suminfo_t; /* type of bitmap summary info */typedef uint32_t xfs_rtword_t ;/* word type for bitmap manipulations */ typedef int64_t xfs_lsn_t ;/* log sequence number */ +typedef int64_t xfs_csn_t ;/* CIL sequence number */ typedef uint32_t xfs_dablk_t ;/* dir/attr block number (in file) */ typedef uint32_t xfs_dahash_t ;/* dir/attr hash value */ fs/xfs/xfs_buf_item.c +1
-1@@ -713,7 +713,7 @@ xfs_buf_item_release( STATIC voidxfs_buf_item_committing (struct xfs_log_item *lip, -xfs_lsn_t commit_lsn) +xfs_csn_t seq) {return xfs_buf_item_release (lip); }fs/xfs/xfs_dquot_item.c +1
-1@@ -188,7 +188,7 @@ xfs_qm_dquot_logitem_release( STATIC voidxfs_qm_dquot_logitem_committing (struct xfs_log_item *lip, -xfs_lsn_t commit_lsn) +xfs_csn_t seq) {return xfs_qm_dquot_logitem_release (lip); }fs/xfs/xfs_file.c +7
-7@@ -119,8 +119,8 @@ xfs_dir_fsync(return xfs_log_force_inode (ip); } -static xfs_lsn_t -xfs_fsync_lsn ( +static xfs_csn_t +xfs_fsync_seq (struct xfs_inode *ip,bool datasync) {@@ -128,7 +128,7 @@ xfs_fsync_lsn(return 0 ;if (datasync && !(ip->i_itemp->ili_fsync_fields & ~XFS_ILOG_TIMESTAMP ))return 0 ; -return ip->i_itemp->ili_last_lsn; +return ip->i_itemp->ili_commit_seq; }/* @@ -151,12 +151,12 @@ xfs_fsync_flush_log( int *log_flushed) {int error =0 ; -xfs_lsn_t lsn; +xfs_csn_t seq;xfs_ilock (ip,XFS_ILOCK_SHARED ); - lsn =xfs_fsync_lsn (ip, datasync); -if (lsn) { - error =xfs_log_force_lsn (ip->i_mount, lsn,XFS_LOG_SYNC , + seq =xfs_fsync_seq (ip, datasync); +if (seq) { + error =xfs_log_force_seq (ip->i_mount, seq,XFS_LOG_SYNC , log_flushed);spin_lock (&ip->i_itemp->ili_lock);fs/xfs/xfs_inode.c +5
-5@@ -2635,7 +2635,7 @@ xfs_iunpin(trace_xfs_inode_unpin_nowait (ip, _RET_IP_);/* Give the log a push to start the unpinning I/O */ -xfs_log_force_lsn (ip->i_mount, ip->i_itemp->ili_last_lsn,0 ,NULL ); +xfs_log_force_seq (ip->i_mount, ip->i_itemp->ili_commit_seq,0 ,NULL ); }@@ -3644,16 +3644,16 @@ intxfs_log_force_inode ( struct xfs_inode *ip) { -xfs_lsn_t lsn =0 ; +xfs_csn_t seq =0 ;xfs_ilock (ip,XFS_ILOCK_SHARED );if (xfs_ipincount (ip)) - lsn = ip->i_itemp->ili_last_lsn; + seq = ip->i_itemp->ili_commit_seq;xfs_iunlock (ip,XFS_ILOCK_SHARED ); -if (!lsn) +if (!seq)return 0 ; -return xfs_log_force_lsn (ip->i_mount, lsn,XFS_LOG_SYNC ,NULL ); +return xfs_log_force_seq (ip->i_mount, seq,XFS_LOG_SYNC ,NULL ); }/* fs/xfs/xfs_inode_item.c +2
-2@@ -643,9 +643,9 @@ xfs_inode_item_committed( STATIC voidxfs_inode_item_committing (struct xfs_log_item *lip, -xfs_lsn_t commit_lsn) +xfs_csn_t seq) { -INODE_ITEM (lip)->ili_last_lsn = commit_lsn; +INODE_ITEM (lip)->ili_commit_seq = seq;return xfs_inode_item_release (lip); }fs/xfs/xfs_inode_item.h +1
-1@@ -33,7 +33,7 @@ struct xfs_inode_log_item {unsigned int ili_fields;/* fields to be logged */ unsigned int ili_fsync_fields;/* logged since last fsync */ xfs_lsn_t ili_flush_lsn;/* lsn at last flush */ -xfs_lsn_t ili_last_lsn;/* lsn at last transaction */ +xfs_csn_t ili_commit_seq;/* last transaction commit */ };static inline int xfs_inode_clean (struct xfs_inode *ip)fs/xfs/xfs_log.c +14
-13@@ -3252,14 +3252,13 @@ xfs_log_force( }static int -__xfs_log_force_lsn ( -struct xfs_mount *mp, +xlog_force_lsn ( +struct xlog *log,xfs_lsn_t lsn,uint flags,int *log_flushed,bool already_slept) { -struct xlog *log = mp->m_log;struct xlog_in_core *iclog;spin_lock (&log->l_icloglock);@@ -3292,8 +3291,6 @@ __xfs_log_force_lsn(if (!already_slept && (iclog->ic_prev->ic_state ==XLOG_STATE_WANT_SYNC || iclog->ic_prev->ic_state ==XLOG_STATE_SYNCING )) { -XFS_STATS_INC (mp, xs_log_force_sleep); -xlog_wait (&iclog->ic_prev->ic_write_wait, &log->l_icloglock);return -EAGAIN ;@@ -3331,25 +3328,29 @@ __xfs_log_force_lsn(* to disk, that thread will wake up all threads waiting on the queue. */ int -xfs_log_force_lsn ( +xfs_log_force_seq (struct xfs_mount *mp, -xfs_lsn_t lsn, +xfs_csn_t seq,uint flags,int *log_flushed) { +struct xlog *log = mp->m_log; +xfs_lsn_t lsn;int ret; -ASSERT (lsn !=0 ); +ASSERT (seq !=0 );XFS_STATS_INC (mp, xs_log_force); -trace_xfs_log_force (mp, lsn, _RET_IP_); +trace_xfs_log_force (mp, seq, _RET_IP_); - lsn =xlog_cil_force_lsn (mp->m_log, lsn); + lsn =xlog_cil_force_seq (log, seq);if (lsn ==NULLCOMMITLSN )return 0 ; - ret =__xfs_log_force_lsn (mp, lsn, flags, log_flushed, false); -if (ret == -EAGAIN ) - ret =__xfs_log_force_lsn (mp, lsn, flags, log_flushed, true); + ret =xlog_force_lsn (log, lsn, flags, log_flushed, false); +if (ret == -EAGAIN ) { +XFS_STATS_INC (mp, xs_log_force_sleep); + ret =xlog_force_lsn (log, lsn, flags, log_flushed, true); + }return ret; }fs/xfs/xfs_log.h +1
-3@@ -106,7 +106,7 @@ struct xfs_item_ops;struct xfs_trans ;int xfs_log_force (struct xfs_mount *mp,uint flags); -int xfs_log_force_lsn (struct xfs_mount *mp,xfs_lsn_t lsn,uint flags, +int xfs_log_force_seq (struct xfs_mount *mp,xfs_csn_t seq,uint flags,int *log_forced); int xfs_log_mount(struct xfs_mount *mp, struct xfs_buftarg *log_target,@@ -131,8 +131,6 @@ bool xfs_log_writable(struct xfs_mount *mp);struct xlog_ticket *xfs_log_ticket_get (struct xlog_ticket *ticket);void xfs_log_ticket_put (struct xlog_ticket *ticket); -void xfs_log_commit_cil (struct xfs_mount *mp,struct xfs_trans *tp, -xfs_lsn_t *commit_lsn,bool regrant);void xlog_cil_process_committed (struct list_head *list);bool xfs_log_item_in_current_chkpt (struct xfs_log_item *lip);fs/xfs/xfs_log_cil.c +11
-19@@ -788,7 +788,7 @@ xlog_cil_push_work(* that higher sequences will wait for us to write out a commit record * before they do. * -* xfs_log_force_lsn requires us to mirror the new sequence into the cil +* xfs_log_force_seq requires us to mirror the new sequence into the cil * structure atomically with the addition of this sequence to the * committing list. This also ensures that we can do unlocked checks * against the current sequence in log forces without risking @@ -1057,16 +1057,14 @@ xlog_cil_empty(* allowed again. */ void -xfs_log_commit_cil ( -struct xfs_mount *mp, +xlog_cil_commit ( +struct xlog *log,struct xfs_trans *tp, -xfs_lsn_t *commit_lsn, +xfs_csn_t *commit_seq,bool regrant) { -struct xlog *log = mp->m_log;struct xfs_cil *cil = log->l_cilp;struct xfs_log_item *lip, *next; -xfs_lsn_t xc_commit_lsn;/* * Do all necessary memory allocation before we lock the CIL. @@ -1080,10 +1078,6 @@ xfs_log_commit_cil(xlog_cil_insert_items (log, tp); - xc_commit_lsn = cil->xc_ctx->sequence; -if (commit_lsn) - *commit_lsn = xc_commit_lsn; -if (regrant && !XLOG_FORCED_SHUTDOWN (log))xfs_log_ticket_regrant (log, tp->t_ticket);else @@ -1106,8 +1100,10 @@ xfs_log_commit_cil(list_for_each_entry_safe (lip, next, &tp->t_items, li_trans) {xfs_trans_del_item (lip);if (lip->li_ops->iop_committing) - lip->li_ops->iop_committing (lip, xc_commit_lsn); + lip->li_ops->iop_committing (lip, cil->xc_ctx->sequence); } +if (commit_seq) + *commit_seq = cil->xc_ctx->sequence;/* xlog_cil_push_background() releases cil->xc_ctx_lock */ xlog_cil_push_background (log);@@ -1124,9 +1120,9 @@ xfs_log_commit_cil(* iclog flush is necessary following this call. */ xfs_lsn_t -xlog_cil_force_lsn ( +xlog_cil_force_seq (struct xlog *log, -xfs_lsn_t sequence) +xfs_csn_t sequence) {struct xfs_cil *cil = log->l_cilp;struct xfs_cil_ctx *ctx;@@ -1222,21 +1218,17 @@ boolxfs_log_item_in_current_chkpt ( struct xfs_log_item *lip) { -struct xfs_cil_ctx *ctx; +struct xfs_cil_ctx *ctx = lip->li_mountp->m_log->l_cilp->xc_ctx;if (list_empty (&lip->li_cil))return false; - ctx = lip->li_mountp->m_log->l_cilp->xc_ctx; -/* * li_seq is written on the first commit of a log item to record the * first checkpoint it is written to. Hence if it is different to the * current sequence, we're in a new checkpoint. */ -if (XFS_LSN_CMP (lip->li_seq, ctx->sequence) !=0 ) -return false; -return true; +return lip->li_seq == ctx->sequence; }/* fs/xfs/xfs_log_priv.h +7
-8@@ -234,7 +234,7 @@ struct xfs_cil;struct xfs_cil_ctx {struct xfs_cil *cil; -xfs_lsn_t sequence;/* chkpt sequence # */ +xfs_csn_t sequence;/* chkpt sequence # */ xfs_lsn_t start_lsn;/* first LSN of chkpt commit */ xfs_lsn_t commit_lsn;/* chkpt commit record lsn */ struct xlog_ticket *ticket;/* chkpt ticket */ @@ -272,10 +272,10 @@ struct xfs_cil {struct xfs_cil_ctx *xc_ctx;spinlock_t xc_push_lock____cacheline_aligned_in_smp ; -xfs_lsn_t xc_push_seq; +xfs_csn_t xc_push_seq;struct list_head xc_committing;wait_queue_head_t xc_commit_wait; -xfs_lsn_t xc_current_sequence; +xfs_csn_t xc_current_sequence;struct work_struct xc_push_work;wait_queue_head_t xc_push_wait;/* background push throttle */ }____cacheline_aligned_in_smp ;@@ -554,19 +554,18 @@ int xlog_cil_init(struct xlog *log);void xlog_cil_init_post_recovery (struct xlog *log);void xlog_cil_destroy (struct xlog *log);bool xlog_cil_empty (struct xlog *log); +void xlog_cil_commit (struct xlog *log,struct xfs_trans *tp, +xfs_csn_t *commit_seq,bool regrant);/* * CIL force routines */ -xfs_lsn_t -xlog_cil_force_lsn ( -struct xlog *log, -xfs_lsn_t sequence); +xfs_lsn_t xlog_cil_force_seq (struct xlog *log,xfs_csn_t sequence);static inline void xlog_cil_force (struct xlog *log) { -xlog_cil_force_lsn (log, log->l_cilp->xc_current_sequence); +xlog_cil_force_seq (log, log->l_cilp->xc_current_sequence); }/* fs/xfs/xfs_trans.c +3
-3@@ -839,7 +839,7 @@ __xfs_trans_commit( bool regrant) {struct xfs_mount *mp = tp->t_mountp; -xfs_lsn_t commit_lsn =-1 ; +xfs_csn_t commit_seq =0 ;int error =0 ;int sync = tp->t_flags &XFS_TRANS_SYNC ;@@ -881,7 +881,7 @@ __xfs_trans_commit(xfs_trans_apply_sb_deltas (tp);xfs_trans_apply_dquot_deltas (tp); -xfs_log_commit_cil (mp, tp, &commit_lsn, regrant); +xlog_cil_commit (mp->m_log, tp, &commit_seq, regrant);xfs_trans_free (tp);@@ -890,7 +890,7 @@ __xfs_trans_commit(* log out now and wait for it. */ if (sync) { - error =xfs_log_force_lsn (mp, commit_lsn,XFS_LOG_SYNC ,NULL ); + error =xfs_log_force_seq (mp, commit_seq,XFS_LOG_SYNC ,NULL );XFS_STATS_INC (mp, xs_trans_sync); }else {XFS_STATS_INC (mp, xs_trans_async);fs/xfs/xfs_trans.h +2
-2@@ -43,7 +43,7 @@ struct xfs_log_item {struct list_head li_cil;/* CIL pointers */ struct xfs_log_vec *li_lv;/* active log vector */ struct xfs_log_vec *li_lv_shadow;/* standby vector */ -xfs_lsn_t li_seq;/* CIL commit seq */ +xfs_csn_t li_seq;/* CIL commit seq */ };/* @@ -69,7 +69,7 @@ struct xfs_item_ops {void (*iop_pin)(struct xfs_log_item *);void (*iop_unpin)(struct xfs_log_item *,int remove);uint (*iop_push)(struct xfs_log_item *,struct list_head *); -void (*iop_committing)(struct xfs_log_item *,xfs_lsn_t commit_lsn); +void (*iop_committing)(struct xfs_log_item *lip,xfs_csn_t seq);void (*iop_release)(struct xfs_log_item *);xfs_lsn_t (*iop_committed)(struct xfs_log_item *,xfs_lsn_t ); int (*iop_recover)(struct xfs_log_item *lip,
Re: [PATCH 10/39] xfs: AIL needs asynchronous CIL forcing
In reply to Dave ChinnerQuoted 93 lines · Dave Chinner
From: Dave Chinner <[email protected]>
The AIL pushing is stalling on log forces when it comes across pinned items. This is happening on removal workloads where the AIL is dominated by stale items that are removed from AIL when the checkpoint that marks the items stale is committed to the journal. This results is relatively few items in the AIL, but those that are are often pinned as directories items are being removed from are still being logged.
As a result, many push cycles through the CIL will first issue a blocking log force to unpin the items. This can take some time to complete, with tracing regularly showing push delays of half a second and sometimes up into the range of several seconds. Sequences like this aren't uncommon:
....
399.829437: xfsaild: last lsn0x11002dd000count 101 stuck 101 flushing 0 tout 20
<wanted 20ms, got 270ms delay>400.099622: xfsaild: target 0x11002f3600, prev 0x11002f3600, last lsn 0x0 400.099623: xfsaild: first lsn 0x11002f3600 400.099679: xfsaild: last lsn 0x1100305000 count 16 stuck 11 flushing 0 tout 50 <wanted 50ms, got 500ms delay> 400.589348: xfsaild: target 0x110032e600, prev 0x11002f3600, last lsn 0x0 400.589349: xfsaild: first lsn 0x1100305000 400.589595: xfsaild: last lsn 0x110032e600 count 156 stuck 101 flushing 30 tout 50 <wanted 50ms, got 460ms delay> 400.950341: xfsaild: target 0x1100353000, prev 0x110032e600, last lsn 0x0 400.950343: xfsaild: first lsn 0x1100317c00 400.950436: xfsaild: last lsn 0x110033d200 count 105 stuck 101 flushing 0 tout 20 <wanted 20ms, got 200ms delay> 401.142333: xfsaild: target 0x1100361600, prev 0x1100353000, last lsn 0x0 401.142334: xfsaild: first lsn 0x110032e600 401.142535: xfsaild: last lsn 0x1100353000 count 122 stuck 101 flushing 8 tout 10 <wanted 10ms, got 10ms delay> 401.154323: xfsaild: target 0x1100361600, prev 0x1100361600, last lsn 0x1100353000 401.154328: xfsaild: first lsn 0x1100353000 401.154389: xfsaild: last lsn 0x1100353000 count 101 stuck 101 flushing 0 tout 20 <wanted 20ms, got 300ms delay> 401.451525: xfsaild: target 0x1100361600, prev 0x1100361600, last lsn 0x0 401.451526: xfsaild: first lsn 0x1100353000 401.451804: xfsaild: last lsn 0x1100377200 count 170 stuck 22 flushing 122 tout 50<wanted 50ms, got 500ms delay>
401.933581: xfsaild: target0x1100361600, prev0x1100361600, last lsn0x0
....In each of these cases, every AIL pass saw 101 log items stuck on the AIL (pinned) with very few other items being found. Each pass, a log force was issued, and delay between last/first is the sleep time
+ the sync log force time.Some of these 101 items pinned the tail of the log. The tail of the log does slowly creep forward (first lsn), but the problem is that the log is actually out of reservation space because it's been running so many transactions that stale items that never reach the AIL but consume log space. Hence we have a largely empty AIL, with long term pins on items that pin the tail of the log that don't get pushed frequently enough to keep log space available.
The problem is the hundreds of milliseconds that we block in the log force pushing the CIL out to disk. The AIL should not be stalled like this - it needs to run and flush items that are at the tail of the log with minimal latency. What we really need to do is trigger a log flush, but then not wait for it at all - we've already done our waiting for stuff to complete when we backed off prior to the log force being issued.
Even if we remove the
XFS_LOG_SYNCfrom thexfs_log_force()call, we still do a blocking flush of the CIL and that is what is causing the issue. Hence we need a new interface for the CIL to trigger an immediate background push of the CIL to get it moving faster but not to wait on that to occur. While the CIL is pushing, the AIL can also be pushing.We already have an internal interface to do this -
xlog_cil_push_now()- but we need a wrapper for it to be used externally.xlog_cil_force_seq()can easily be extended to do what we need as it already implements the synchronous CIL push viaxlog_cil_push_now(). Add the necessary flags and "push current sequence" semantics toxlog_cil_force_seq()and convert the AIL pushing to use it.One of the complexities here is that the CIL push does not guarantee that the commit record for the CIL checkpoint is written to disk. The current log force ensures this by submitting the current ACTIVE iclog that the commit record was written to. We need the CIL to actually write this commit record to disk for an async push to ensure that the checkpoint actually makes it to disk and unpins the pinned items in the checkpoint on completion. Hence we need to pass down to the CIL push that we are doing an async flush so that it can switch out the
commit_iclogif necessary to get written to disk when the commit iclog is finally released.
Quoted 2 lines
Signed-off-by Dave Chinner <[email protected]>Reviewed-by Darrick J. Wong <[email protected]>
Ok, makes sense
Quoted 351 lines
--- fs/xfs/xfs_log.c | 38 ++++++++++++++------------ fs/xfs/xfs_log.h | 1 + fs/xfs/xfs_log_cil.c | 61 ++++++++++++++++++++++++++++++++++++------ fs/xfs/xfs_log_priv.h | 5 ++++ fs/xfs/xfs_sysfs.c | 1 + fs/xfs/xfs_trace.c | 1 + fs/xfs/xfs_trans.c | 2 +- fs/xfs/xfs_trans_ail.c | 11 +++++--- 8 files changed, 91 insertions(+), 29 deletions(-)fs/xfs/xfs_log.c +21
-17@@ -50,11 +50,6 @@ xlog_state_get_iclog_space(int *continued_write, int *logoffsetp); STATIC void -xlog_state_switch_iclogs ( -struct xlog *log, -struct xlog_in_core *iclog, -int eventual_size); -STATIC voidxlog_grant_push_ail (struct xlog *log,int need_bytes);@@ -3104,7 +3099,7 @@ xfs_log_ticket_ungrant(* This routine will mark the current iclog in the ring as WANT_SYNC and move * the current iclog pointer to the next iclog in the ring. */ -STATIC void +void xlog_state_switch_iclogs( struct xlog *log, struct xlog_in_core *iclog,@@ -3251,6 +3246,20 @@ xfs_log_force(return -EIO ; } +/* +* Force the log to a specific LSN. +* +* If an iclog with that lsn can be found: +* If it is in the DIRTY state, just return. +* If it is in the ACTIVE state, move the in-core log into the WANT_SYNC +* state and go to sleep or return. +* If it is in any other state, go to sleep or return. +* +* Synchronous forces are implemented with a wait queue. All callers trying +* to force a given lsn to disk must wait on the queue attached to the +* specific in-core log. When given in-core log finally completes its write +* to disk, that thread will wake up all threads waiting on the queue. +*/ static int xlog_force_lsn( struct xlog *log,@@ -3314,18 +3323,13 @@ xlog_force_lsn( }/* -* Force the in-core log to disk for a specific LSN. +* Force the log to a specific checkpoint sequence. * -* Find in-core log with lsn. -* If it is in the DIRTY state, just return. -* If it is in the ACTIVE state, move the in-core log into the WANT_SYNC -* state and go to sleep or return. -* If it is in any other state, go to sleep or return. -* -* Synchronous forces are implemented with a wait queue. All callers trying -* to force a given lsn to disk must wait on the queue attached to the -* specific in-core log. When given in-core log finally completes its write -* to disk, that thread will wake up all threads waiting on the queue. +* First force the CIL so that all the required changes have been flushed to the +* iclogs. If the CIL force completed it will return a commit LSN that indicates +* the iclog that needs to be flushed to stable storage. If the caller needs +* a synchronous log force, we will wait on the iclog with the LSN returned by +* xlog_cil_force_seq() to be completed. */ int xfs_log_force_seq(fs/xfs/xfs_log.h +1
-0@@ -104,6 +104,7 @@ struct xlog_ticket;struct xfs_log_item ;struct xfs_item_ops ;struct xfs_trans ; +struct xlog ;int xfs_log_force (struct xfs_mount *mp,uint flags); int xfs_log_force_seq(struct xfs_mount *mp, xfs_csn_t seq, uint flags,fs/xfs/xfs_log_cil.c +53
-8@@ -658,6 +658,7 @@ xlog_cil_push_work(xfs_lsn_t push_seq;struct bio bio;DECLARE_COMPLETION_ONSTACK (bdev_flush); +bool push_commit_stable; new_ctx =kmem_zalloc (sizeof (*new_ctx),KM_NOFS ); new_ctx->ticket =xlog_cil_ticket_alloc (log);@@ -668,6 +669,8 @@ xlog_cil_push_work(spin_lock (&cil->xc_push_lock); push_seq = cil->xc_push_seq;ASSERT (push_seq <= ctx->sequence); + push_commit_stable = cil->xc_push_commit_stable; + cil->xc_push_commit_stable = false;/* * As we are about to switch to a new, empty CIL context, we no longer @@ -910,8 +913,15 @@ xlog_cil_push_work(* The commit iclog must be written to stable storage to guarantee * journal IO vs metadata writeback IO is correctly ordered on stable * storage. +* +* If the push caller needs the commit to be immediately stable and the +* commit_iclog is not yet marked as XLOG_STATE_WANT_SYNC to indicate it +* will be written when released, switch it's state to WANT_SYNC right +* now. */ commit_iclog->ic_flags |=XLOG_ICL_NEED_FUA ; +if (push_commit_stable && commit_iclog->ic_state ==XLOG_STATE_ACTIVE ) +xlog_state_switch_iclogs (log, commit_iclog,0 );xlog_state_release_iclog (log, commit_iclog);spin_unlock (&log->l_icloglock);return ;@@ -996,13 +1006,26 @@ xlog_cil_push_background(/* * xlog_cil_push_now() is used to trigger an immediate CIL push to the sequence * number that is passed. When it returns, the work will be queued for -* @push_seq, but it won't be completed. The caller is expected to do any -* waiting for push_seq to complete if it is required. +* @push_seq, but it won't be completed. +* +* If the caller is performing a synchronous force, we will flush the workqueue +* to get previously queued work moving to minimise the wait time they will +* undergo waiting for all outstanding pushes to complete. The caller is +* expected to do the required waiting for push_seq to complete. +* +* If the caller is performing an async push, we need to ensure that the +* checkpoint is fully flushed out of the iclogs when we finish the push. If we +* don't do this, then the commit record may remain sitting in memory in an +* ACTIVE iclog. This then requires another full log force to push to disk, +* which defeats the purpose of having an async, non-blocking CIL force +* mechanism. Hence in this case we need to pass a flag to the push work to +* indicate it needs to flush the commit record itself. */ static void xlog_cil_push_now (struct xlog *log, -xfs_lsn_t push_seq) +xfs_lsn_t push_seq, +bool async) {struct xfs_cil *cil = log->l_cilp;@@ -1012,7 +1035,8 @@ xlog_cil_push_now(ASSERT (push_seq && push_seq <= cil->xc_current_sequence);/* start on any pending background push to minimise wait time on it */ -flush_work (&cil->xc_push_work); +if (!async) +flush_work (&cil->xc_push_work);/* * If the CIL is empty or we've already pushed the sequence then @@ -1025,6 +1049,7 @@ xlog_cil_push_now( } cil->xc_push_seq = push_seq; + cil->xc_push_commit_stable = async;queue_work (log->l_mp->m_cil_workqueue, &cil->xc_push_work);spin_unlock (&cil->xc_push_lock); }@@ -1109,12 +1134,27 @@ xlog_cil_commit(xlog_cil_push_background (log); } +/* +* Flush the CIL to stable storage but don't wait for it to complete. This +* requires the CIL push to ensure the commit record for the push hits the disk, +* but otherwise is no different to a push done from a log force. +*/ +void +xlog_cil_flush ( +struct xlog *log) +{ +xfs_csn_t seq = log->l_cilp->xc_current_sequence; + +trace_xfs_log_force (log->l_mp, seq, _RET_IP_); +xlog_cil_push_now (log, seq, true); +} +/* * Conditionally push the CIL based on the sequence passed in. * -* We only need to push if we haven't already pushed the sequence -* number given. Hence the only time we will trigger a push here is -* if the push sequence is the same as the current context. +* We only need to push if we haven't already pushed the sequence number given. +* Hence the only time we will trigger a push here is if the push sequence is +* the same as the current context. * * We return the current commit lsn to allow the callers to determine if a * iclog flush is necessary following this call. @@ -1130,13 +1170,17 @@ xlog_cil_force_seq(ASSERT (sequence <= cil->xc_current_sequence); +if (!sequence) + sequence = cil->xc_current_sequence; +trace_xfs_log_force (log->l_mp, sequence, _RET_IP_); +/* * check to see if we need to force out the current context. * xlog_cil_push() handles racing pushes for the same sequence, * so no need to deal with it here. */ restart: -xlog_cil_push_now (log, sequence); +xlog_cil_push_now (log, sequence, false);/* * See if we can find a previous sequence still committing. @@ -1160,6 +1204,7 @@ xlog_cil_force_seq(* It is still being pushed! Wait for the push to * complete, then start again from the beginning. */ +XFS_STATS_INC (log->l_mp, xs_log_force_sleep);xlog_wait (&cil->xc_commit_wait, &cil->xc_push_lock); goto restart; }fs/xfs/xfs_log_priv.h +5
-0@@ -273,6 +273,7 @@ struct xfs_cil {spinlock_t xc_push_lock____cacheline_aligned_in_smp ;xfs_csn_t xc_push_seq; +bool xc_push_commit_stable;struct list_head xc_committing;wait_queue_head_t xc_commit_wait;xfs_csn_t xc_current_sequence;@@ -487,9 +488,12 @@ int xlog_write(struct xlog *log, struct xfs_log_vec *log_vector, struct xlog_in_core **commit_iclog, uint optype);int xlog_commit_record (struct xlog *log,struct xlog_ticket *ticket,struct xlog_in_core **iclog,xfs_lsn_t *lsn); +void xfs_log_ticket_ungrant (struct xlog *log,struct xlog_ticket *ticket);void xfs_log_ticket_regrant (struct xlog *log,struct xlog_ticket *ticket); +void xlog_state_switch_iclogs (struct xlog *log,struct xlog_in_core *iclog, +int eventual_size);int xlog_state_release_iclog (struct xlog *log,struct xlog_in_core *iclog);/* @@ -560,6 +564,7 @@ void xlog_cil_commit(struct xlog *log, struct xfs_trans *tp,/* * CIL force routines */ +void xlog_cil_flush (struct xlog *log);xfs_lsn_t xlog_cil_force_seq (struct xlog *log,xfs_csn_t sequence); static inline voidfs/xfs/xfs_sysfs.c +1
-0@@ -10,6 +10,7 @@#include "xfs_log_format.h" #include "xfs_trans_resv.h" #include "xfs_sysfs.h" +#include "xfs_log.h" #include "xfs_log_priv.h" #include "xfs_mount.h" fs/xfs/xfs_trace.c +1
-0@@ -20,6 +20,7 @@#include "xfs_bmap.h" #include "xfs_attr.h" #include "xfs_trans.h" +#include "xfs_log.h" #include "xfs_log_priv.h" #include "xfs_buf_item.h" #include "xfs_quota.h" fs/xfs/xfs_trans.c +1
-1@@ -9,7 +9,6 @@#include "xfs_shared.h" #include "xfs_format.h" #include "xfs_log_format.h" -#include "xfs_log_priv.h" #include "xfs_trans_resv.h" #include "xfs_mount.h" #include "xfs_extent_busy.h" @@ -17,6 +16,7 @@#include "xfs_trans.h" #include "xfs_trans_priv.h" #include "xfs_log.h" +#include "xfs_log_priv.h" #include "xfs_trace.h" #include "xfs_error.h" #include "xfs_defer.h" fs/xfs/xfs_trans_ail.c +8
-3@@ -17,6 +17,7 @@#include "xfs_errortag.h" #include "xfs_error.h" #include "xfs_log.h" +#include "xfs_log_priv.h" #ifdef DEBUG /* @@ -429,8 +430,12 @@ xfsaild_push(/* * If we encountered pinned items or did not finish writing out all -* buffers the last time we ran, force the log first and wait for it -* before pushing again. +* buffers the last time we ran, force a background CIL push to get the +* items unpinned in the near future. We do not wait on the CIL push as +* that could stall us for seconds if there is enough background IO +* load. Stalling for that long when the tail of the log is pinned and +* needs flushing will hard stop the transaction subsystem when log +* space runs out. */ if (ailp->ail_log_flush && ailp->ail_last_pushed_lsn == 0 && (!list_empty_careful(&ailp->ail_buf_list) ||@@ -438,7 +443,7 @@ xfsaild_push( ailp->ail_log_flush =0 ;XFS_STATS_INC (mp, xs_push_ail_flush); -xfs_log_force (mp,XFS_LOG_SYNC ); +xlog_cil_flush (mp->m_log); }spin_lock (&ailp->ail_lock);
Quoted 31 lines · Darrick J. Wong
Quoted 17 lines · Dave Chinner
Hi folks,
This is an update of the consolidated log scalability patchset I've been working on. Version 4 was posted here:
https://lore.kernel.org/linux-xfs/[email protected]/
This version contains the changes Darrick requested during review. The only patch remaining without at least one RVB tag is patch 30.
Performance improvements are largely documented in the change logs of the individual patches. Headline numbers are an increase in transaction rate from 700k commits/s to 1.7M commits/s, and a reduction in fua/flush operations by 2-3 orders of magnitude on metadata heavy workloads that don't use fsync.
Summary of series:
Quoted 7 lines
Patches Modifications
------- -------------
1-7: log write FUA/FLUSH optimisations
8: bug fix
9-11: Async CIL pushes
12-25:xlog_write()rework
26-39: CIL commit scalabilityFrom this latest posting, I see that the first nine patches all have multiple reviews. Some of patches 10-19 have review tags split between Brian and Christoph, but neither have added them all the way through. I think I'm the only one who has supplied RVB tags for all forty.
Quoted 8 lines
So my question is: at what point would you like me to pull the segments of this patchset into upstream? "The maintainer reviewed everything" is of course our usual standard, but this touches a /lot/ of core logging code, and logging isn't one of my stronger areas of familiarity.
I think 1-8 look fine for 5.14. Do you want me to wait for Brian and/or Christoph (or really, any third pair of eyes) to finish working their way through 9-11 and 12-25 before merging them?
Quite frankly, I don't think waiting longer for more review is going to do much to improve the code further. It's largely unchanged since the last merge cycle went by when I was already waiting for reviews and it was considered "not enough time to review in this cycle". It's got enough reviews now to pass the merge bar, and the only way we are going to shake any remaining problems with this code out is to merge it and get it out to a wider testing base....
Indeed, if it is merged now it is going to sit another 3 months in for-next+rc kernels before it is released to users, so I don't think having it sit for another 3 months only in my test tree before it gets wider testing benefits anyone. All it does is slow me down and start pushing me towards having an entirely unmanageable review backlog like you already have, Darrick.
Given that our rate-of-merge limitations are largely caused by a lack of review bandwidth, putting off merging code that has already met the review bar so it can have "more review" seems like a big step backwards in terms of working through our review backlog. We need to review and merge stuff faster, not block more stuff by trying to make review capture every possible problem before we merge the code.
So, yeah, if I were maintainer and I saw every patch had a RVB on it, I'd be merging it straight away. But I'm not the maintainer, so I'll do whatever you want...
I've fixed the little issues with the last posting, and it ran through fstests just fine last night, so I'm just about ready to send you a pull request for this series.
Cheers,
Dave.
Signature · 2 lines
Dave Chinner [email protected]
kernel test robot
build bot[xfs] 80d287de7b: stress-ng.dir.ops_per_sec 80.1% improvement
In reply to Dave ChinnerFYI, we noticed a 80.1% improvement of stress-ng.dir.ops_per_sec due to commit:
Greeting,
FYI, we noticed a 80.1% improvement of stress-ng.dir.ops_per_sec due to commit:
commit: 80d287de7b49ed673418f4fb91a523c58c5bebf2 ("[PATCH 07/39] xfs: journal IO cache flush reductions")
url: https://github.com/0day-ci/linux/commits/Dave-Chinner/xfs-CIL-and-log-optimisations/20210603-134113
base: https://git.kernel.org/cgit/fs/xfs/xfs-linux.git for-next
in testcase: stress-ng
on test machine: 96 threads 2 sockets Intel(R) Xeon(R) Gold 6252 CPU @ 2.10GHz with 512G memory with following parameters:
nr_threads: 10% disk: 1HDD testtime: 60s fs: xfs class: filesystem test: dir cpufreq_governor: performance ucode: 0x5003006
Details are as below:
-------------------------------------------------------------------------------------------------->
To reproduce:
git clone https://github.com/intel/lkp-tests.git
cd lkp-tests
bin/lkp install job.yaml # job file is attached in this email
bin/lkp split-job --compatible job.yaml # generate the yaml file for lkp run
bin/lkp run generated-yaml-file
=========================================================================================
class/compiler/cpufreq_governor/disk/fs/kconfig/nr_threads/rootfs/tbox_group/test/testcase/testtime/ucode:
filesystem/gcc-9/performance/1HDD/xfs/x86_64-rhel-8.3/10%/debian-10.4-x86_64-20200603.cgz/lkp-csl-2sp7/dir/stress-ng/60s/0x5003006
commit:
d5405b4dd5 ("xfs: remove need_start_rec parameter from xlog_write()") 80d287de7b ("xfs: journal IO cache flush reductions")
d5405b4dd577ba9a 80d287de7b49ed673418f4fb91a
---------------- ---------------------------
%stddev %change %stddev
\ | \
1482543 +80.1% 2669796 ± 6% stress-ng.dir.ops
24569 +80.1% 44248 ± 6% stress-ng.dir.ops_per_sec
713.83 ± 10% +74.0% 1241 ± 6% stress-ng.time.involuntary_context_switches
204.83 +84.8% 378.50 stress-ng.time.percent_of_cpu_this_job_got
124.81 +84.5% 230.26 stress-ng.time.system_time
2619366 +82.1% 4770408 ± 4% stress-ng.time.voluntary_context_switches
1.72 ± 14% +1.6 3.35 ± 5% mpstat.cpu.all.sys%
236.19 +15.9% 273.81 ± 2% pmeter.Average_Active_Power
96.31 -1.4% 94.95 iostat.cpu.idle
3.51 +37.5% 4.82 iostat.cpu.system
4568 ± 9% +22.0% 5572 ± 6% meminfo.Active
3959 ± 3% +27.8% 5061 ± 3% meminfo.Active(anon)
380393 ± 10% +49.6% 569186 ± 14% numa-numastat.node0.local_node
457743 ± 5% +39.2% 637259 ± 11% numa-numastat.node0.numa_hit
10063 ± 2% +33.4% 13426 ± 5% softirqs.BLOCK
8625 ± 19% +18.3% 10204 ± 4% softirqs.CPU14.SCHED
5410 ± 55% +89.4% 10248 ± 3% softirqs.CPU65.SCHED
41612495 +79.6% 74744322 ± 5% cpuidle.C1.time
1407022 +80.2% 2535388 ± 9% cpuidle.C1.usage
322643 ± 8% +52.7% 492813 ± 9% cpuidle.POLL.time
28413 ± 4% +39.4% 39600 ± 8% cpuidle.POLL.usage
96.00 -1.7% 94.33 vmstat.cpu.id
6494 ± 3% +74.4% 11328 ± 6% vmstat.io.bo
2.00 +75.0% 3.50 ± 14% vmstat.procs.r
81184 +81.5% 147330 ± 4% vmstat.system.cs
97.17 +49.2% 145.00 turbostat.Avg_MHz
4.87 +1.2 6.06 ± 2% turbostat.Busy%
2003 +19.9% 2402 ± 3% turbostat.Bzy_MHz
1402579 +80.4% 2530574 ± 9% turbostat.C1
0.67 +0.5 1.20 ± 5% turbostat.C1%
94.08 -2.0 92.07 turbostat.C1E%
46.17 +10.5% 51.00 turbostat.PkgTmp
112.71 +29.0% 145.38 ± 3% turbostat.PkgWatt
987.67 ± 3% +27.7% 1261 ± 3% proc-vmstat.nr_active_anon
3894 +7.3% 4179 proc-vmstat.nr_shmem
987.67 ± 3% +27.7% 1261 ± 3% proc-vmstat.nr_zone_active_anon
657336 +29.0% 847751 proc-vmstat.numa_hit
570584 +33.4% 761004 ± 2% proc-vmstat.numa_local
1419 ± 13% +56.8% 2226 ± 12% proc-vmstat.pgactivate
914482 ± 3% +31.0% 1197750 ± 2% proc-vmstat.pgalloc_normal
738528 ± 4% +37.0% 1011485 ± 3% proc-vmstat.pgfree
429578 ± 2% +74.9% 751447 ± 6% proc-vmstat.pgpgout
1282 ± 6% +25.4% 1608 ± 12% slabinfo.buffer_head.active_objs
1282 ± 6% +25.4% 1608 ± 12% slabinfo.buffer_head.num_objs
10382 ± 4% -12.9% 9043 ± 3% slabinfo.kmalloc-128.active_objs
10533 ± 3% -11.9% 9284 ± 3% slabinfo.kmalloc-128.num_objs
126328 ± 3% -14.4% 108194 ± 3% slabinfo.kmalloc-512.active_objs
257974 ± 5% +21.6% 313574 ± 9% slabinfo.kmalloc-8.active_objs
506.17 ± 5% +21.4% 614.33 ± 9% slabinfo.kmalloc-8.active_slabs
259338 ± 5% +21.4% 314774 ± 9% slabinfo.kmalloc-8.num_objs
506.17 ± 5% +21.4% 614.33 ± 9% slabinfo.kmalloc-8.num_slabs
17113 ± 2% +39.3% 23841 ± 6% interrupts.315:PCI-MSI.376832-edge.ahci[0000:00:17.0]
95405 ± 3% +27.9% 122055 ± 6% interrupts.CAL:Function_call_interrupts
1021 ± 25% +64.5% 1680 ± 22% interrupts.CPU14.CAL:Function_call_interrupts
81.83 ± 44% +100.8% 164.33 ± 17% interrupts.CPU14.RES:Rescheduling_interrupts
734.33 ± 21% +85.7% 1363 ± 47% interrupts.CPU16.CAL:Function_call_interrupts
936.83 ± 34% +67.6% 1570 ± 21% interrupts.CPU21.CAL:Function_call_interrupts
74.67 ± 46% +87.5% 140.00 ± 34% interrupts.CPU21.RES:Rescheduling_interrupts
990.50 ± 12% +28.8% 1275 ± 10% interrupts.CPU56.CAL:Function_call_interrupts
1000 ± 25% +88.2% 1882 ± 30% interrupts.CPU65.CAL:Function_call_interrupts
75.50 ± 34% +171.3% 204.83 ± 58% interrupts.CPU65.RES:Rescheduling_interrupts
1180 ± 23% +63.4% 1928 ± 31% interrupts.CPU8.CAL:Function_call_interrupts
1174 ± 27% +96.3% 2305 ± 38% interrupts.CPU9.CAL:Function_call_interrupts
31436 ± 8% +67.5% 52645 ± 7% interrupts.NMI:Non-maskable_interrupts
31436 ± 8% +67.5% 52645 ± 7% interrupts.PMI:Performance_monitoring_interrupts
4741 ± 4% +45.0% 6874 ± 13% interrupts.RES:Rescheduling_interrupts
4.00 -17.7% 3.29 ± 2% perf-stat.i.MPKI
2.268e+09 +70.7% 3.871e+09 ± 5% perf-stat.i.branch-instructions
0.84 ± 7% -0.3 0.59 ± 3% perf-stat.i.branch-miss-rate%
13994599 ± 5% +42.4% 19932596 ± 4% perf-stat.i.branch-misses
3478750 +137.0% 8243762 ± 67% perf-stat.i.cache-misses
40667842 +69.3% 68868679 ± 7% perf-stat.i.cache-references
84844 +81.4% 153896 ± 5% perf-stat.i.context-switches
1.24 ± 9% -46.8% 0.66 ± 7% perf-stat.i.cpi
8.853e+09 +52.6% 1.351e+10 perf-stat.i.cpu-cycles
111.43 +6.6% 118.78 perf-stat.i.cpu-migrations
2619 ± 5% -19.1% 2118 ± 27% perf-stat.i.cycles-between-cache-misses
0.01 ± 10% -0.0 0.01 ± 4% perf-stat.i.dTLB-load-miss-rate%
177121 ± 6% +93.5% 342763 ± 11% perf-stat.i.dTLB-load-misses
3.145e+09 +74.6% 5.492e+09 ± 6% perf-stat.i.dTLB-loads
0.00 ± 14% -0.0 0.00 ± 5% perf-stat.i.dTLB-store-miss-rate%
20981 ± 14% +41.5% 29678 ± 6% perf-stat.i.dTLB-store-misses
1.626e+09 +72.4% 2.804e+09 ± 5% perf-stat.i.dTLB-stores
4231356 +62.4% 6872280 ± 4% perf-stat.i.iTLB-load-misses
6324364 +60.3% 10139019 ± 4% perf-stat.i.iTLB-loads
1.222e+10 +71.5% 2.096e+10 ± 5% perf-stat.i.instructions
2568 +23.5% 3171 perf-stat.i.instructions-per-iTLB-miss
1.15 +33.4% 1.54 ± 6% perf-stat.i.ipc
0.09 +52.6% 0.14 perf-stat.i.metric.GHz
509.54 +70.8% 870.20 ± 3% perf-stat.i.metric.K/sec
73.36 +72.8% 126.75 ± 6% perf-stat.i.metric.M/sec
993104 +77.1% 1758681 ± 8% perf-stat.i.node-loads
0.62 ± 4% -0.1 0.52 ± 4% perf-stat.overall.branch-miss-rate%
2545 ± 2% -19.2% 2056 ± 30% perf-stat.overall.cycles-between-cache-misses
0.00 ± 14% -0.0 0.00 ± 6% perf-stat.overall.dTLB-store-miss-rate%
2888 +5.5% 3048 perf-stat.overall.instructions-per-iTLB-miss
2.233e+09 +70.6% 3.811e+09 ± 5% perf-stat.ps.branch-instructions
13776498 ± 5% +42.4% 19620370 ± 4% perf-stat.ps.branch-misses
3424430 +136.9% 8113289 ± 67% perf-stat.ps.cache-misses
40038403 +69.3% 67785317 ± 7% perf-stat.ps.cache-references
83516 +81.4% 151470 ± 5% perf-stat.ps.context-switches
8.716e+09 +52.6% 1.33e+10 perf-stat.ps.cpu-cycles
109.67 +6.6% 116.90 perf-stat.ps.cpu-migrations
174387 ± 6% +93.4% 337330 ± 11% perf-stat.ps.dTLB-load-misses
3.096e+09 +74.6% 5.406e+09 ± 6% perf-stat.ps.dTLB-loads
20649 ± 14% +41.4% 29202 ± 6% perf-stat.ps.dTLB-store-misses
1.601e+09 +72.4% 2.76e+09 ± 5% perf-stat.ps.dTLB-stores
4165626 +62.4% 6764240 ± 4% perf-stat.ps.iTLB-load-misses
6225700 +60.3% 9979567 ± 4% perf-stat.ps.iTLB-loads
1.203e+10 +71.5% 2.063e+10 ± 5% perf-stat.ps.instructions
977553 +77.0% 1730599 ± 8% perf-stat.ps.node-loads
7.679e+11 +71.5% 1.317e+12 ± 5% perf-stat.total.instructions
55.09 -5.3 49.84 perf-profile.calltrace.cycles-pp.secondary_startup_64_no_verify
8.68 ± 4% -4.7 4.02 ± 17% perf-profile.calltrace.cycles-pp.asm_sysvec_apic_timer_interrupt.cpuidle_enter_state.cpuidle_enter.do_idle.cpu_startup_entry
53.42 ± 2% -3.9 49.47 perf-profile.calltrace.cycles-pp.start_secondary.secondary_startup_64_no_verify
53.41 ± 2% -3.9 49.47 perf-profile.calltrace.cycles-pp.cpu_startup_entry.start_secondary.secondary_startup_64_no_verify
53.38 ± 2% -3.9 49.45 perf-profile.calltrace.cycles-pp.do_idle.cpu_startup_entry.start_secondary.secondary_startup_64_no_verify
7.08 ± 4% -3.7 3.33 ± 14% perf-profile.calltrace.cycles-pp.sysvec_apic_timer_interrupt.asm_sysvec_apic_timer_interrupt.cpuidle_enter_state.cpuidle_enter.do_idle
49.39 ± 2% -2.8 46.62 perf-profile.calltrace.cycles-pp.cpuidle_enter.do_idle.cpu_startup_entry.start_secondary.secondary_startup_64_no_verify
4.86 ± 6% -2.6 2.23 ± 13% perf-profile.calltrace.cycles-pp.__sysvec_apic_timer_interrupt.sysvec_apic_timer_interrupt.asm_sysvec_apic_timer_interrupt.cpuidle_enter_state.cpuidle_enter
4.81 ± 6% -2.6 2.20 ± 13% perf-profile.calltrace.cycles-pp.hrtimer_interrupt.__sysvec_apic_timer_interrupt.sysvec_apic_timer_interrupt.asm_sysvec_apic_timer_interrupt.cpuidle_enter_state
48.61 ± 2% -2.5 46.14 perf-profile.calltrace.cycles-pp.cpuidle_enter_state.cpuidle_enter.do_idle.cpu_startup_entry.start_secondary
2.65 ± 13% -1.1 1.57 ± 18% perf-profile.calltrace.cycles-pp.menu_select.do_idle.cpu_startup_entry.start_secondary.secondary_startup_64_no_verify
2.23 ± 5% -1.1 1.16 ± 11% perf-profile.calltrace.cycles-pp.__hrtimer_run_queues.hrtimer_interrupt.__sysvec_apic_timer_interrupt.sysvec_apic_timer_interrupt.asm_sysvec_apic_timer_interrupt
1.77 ± 11% -1.1 0.71 ± 22% perf-profile.calltrace.cycles-pp.clockevents_program_event.hrtimer_interrupt.__sysvec_apic_timer_interrupt.sysvec_apic_timer_interrupt.asm_sysvec_apic_timer_interrupt
1.59 ± 5% -0.8 0.77 ± 15% perf-profile.calltrace.cycles-pp.tick_sched_timer.__hrtimer_run_queues.hrtimer_interrupt.__sysvec_apic_timer_interrupt.sysvec_apic_timer_interrupt
1.21 ± 23% -0.7 0.47 ± 79% perf-profile.calltrace.cycles-pp.tick_nohz_next_event.tick_nohz_get_sleep_length.menu_select.do_idle.cpu_startup_entry
1.37 ± 5% -0.7 0.68 ± 17% perf-profile.calltrace.cycles-pp.tick_sched_handle.tick_sched_timer.__hrtimer_run_queues.hrtimer_interrupt.__sysvec_apic_timer_interrupt
1.48 ± 18% -0.7 0.81 ± 25% perf-profile.calltrace.cycles-pp.tick_nohz_get_sleep_length.menu_select.do_idle.cpu_startup_entry.start_secondary
1.33 ± 6% -0.7 0.65 ± 18% perf-profile.calltrace.cycles-pp.update_process_times.tick_sched_handle.tick_sched_timer.__hrtimer_run_queues.hrtimer_interrupt
0.97 ± 6% -0.5 0.46 ± 44% perf-profile.calltrace.cycles-pp.irq_exit_rcu.sysvec_apic_timer_interrupt.asm_sysvec_apic_timer_interrupt.cpuidle_enter_state.cpuidle_enter
0.85 ± 6% -0.3 0.51 ± 70% perf-profile.calltrace.cycles-pp.worker_thread.kthread.ret_from_fork
0.85 ± 6% -0.3 0.50 ± 70% perf-profile.calltrace.cycles-pp.process_one_work.worker_thread.kthread.ret_from_fork
0.91 ± 5% -0.2 0.73 ± 18% perf-profile.calltrace.cycles-pp.ret_from_fork
0.91 ± 5% -0.2 0.73 ± 18% perf-profile.calltrace.cycles-pp.kthread.ret_from_fork
0.64 ± 7% +0.1 0.76 ± 5% perf-profile.calltrace.cycles-pp.xfs_btree_lookup.xfs_check_agi_freecount.xfs_dialloc_ag.xfs_dir_ialloc.xfs_create
0.84 ± 6% +0.1 0.96 ± 4% perf-profile.calltrace.cycles-pp.xlog_cil_insert_items.xfs_log_commit_cil.__xfs_trans_commit.xfs_remove.xfs_vn_unlink
0.64 ± 4% +0.1 0.77 ± 7% perf-profile.calltrace.cycles-pp.xfs_trans_read_buf_map.xfs_read_agi.xfs_iunlink.xfs_remove.xfs_vn_unlink
0.72 ± 11% +0.1 0.85 ± 4% perf-profile.calltrace.cycles-pp.xfs_dir2_leafn_lookup_for_entry.xfs_da3_node_lookup_int.xfs_dir2_node_removename.xfs_dir_removename.xfs_remove
0.67 ± 3% +0.1 0.80 ± 7% perf-profile.calltrace.cycles-pp.xfs_read_agi.xfs_iunlink.xfs_remove.xfs_vn_unlink.vfs_rmdir
0.74 ± 3% +0.1 0.88 ± 8% perf-profile.calltrace.cycles-pp.xfs_dir2_leafn_remove.xfs_dir2_node_removename.xfs_dir_removename.xfs_remove.xfs_vn_unlink
0.77 ± 3% +0.1 0.91 ± 7% perf-profile.calltrace.cycles-pp.xfs_iunlink.xfs_remove.xfs_vn_unlink.vfs_rmdir.do_rmdir
1.15 ± 3% +0.2 1.32 ± 6% perf-profile.calltrace.cycles-pp.xlog_cil_insert_items.xfs_log_commit_cil.__xfs_trans_commit.xfs_create.xfs_generic_create
1.49 ± 4% +0.2 1.66 ± 3% perf-profile.calltrace.cycles-pp.xfs_btree_check_sblock.xfs_btree_get_rec.xfs_inobt_get_rec.xfs_check_agi_freecount.xfs_dialloc_ag
0.44 ± 44% +0.2 0.63 ± 7% perf-profile.calltrace.cycles-pp.xfs_buf_get_map.xfs_buf_read_map.xfs_trans_read_buf_map.xfs_read_agi.xfs_iunlink
0.94 ± 8% +0.2 1.13 ± 5% perf-profile.calltrace.cycles-pp.xfs_iunlink_remove.xfs_ifree.xfs_inactive_ifree.xfs_inactive.xfs_fs_destroy_inode
0.46 ± 45% +0.2 0.65 ± 7% perf-profile.calltrace.cycles-pp.xfs_buf_read_map.xfs_trans_read_buf_map.xfs_read_agi.xfs_iunlink.xfs_remove
1.74 ± 3% +0.2 1.94 ± 3% perf-profile.calltrace.cycles-pp.__xfs_btree_check_sblock.xfs_btree_check_sblock.xfs_btree_get_rec.xfs_inobt_get_rec.xfs_check_agi_freecount
1.15 ± 7% +0.2 1.35 perf-profile.calltrace.cycles-pp.xfs_da3_node_lookup_int.xfs_dir2_node_removename.xfs_dir_removename.xfs_remove.xfs_vn_unlink
0.51 ± 46% +0.2 0.71 ± 5% perf-profile.calltrace.cycles-pp.xfs_read_agi.xfs_iunlink_remove.xfs_ifree.xfs_inactive_ifree.xfs_inactive
0.95 ± 8% +0.2 1.16 ± 7% perf-profile.calltrace.cycles-pp.xfs_dialloc_select_ag.xfs_dir_ialloc.xfs_create.xfs_generic_create.vfs_mkdir
1.64 ± 4% +0.2 1.86 ± 3% perf-profile.calltrace.cycles-pp.xfs_btree_check_sblock.xfs_btree_increment.xfs_check_agi_freecount.xfs_dialloc_ag.xfs_dir_ialloc
2.67 ± 3% +0.2 2.90 ± 2% perf-profile.calltrace.cycles-pp.xfs_btree_get_rec.xfs_inobt_get_rec.xfs_check_agi_freecount.xfs_dialloc_ag.xfs_dir_ialloc
2.40 ± 4% +0.3 2.66 ± 5% perf-profile.calltrace.cycles-pp.__xfs_trans_commit.xfs_create.xfs_generic_create.vfs_mkdir.do_mkdirat
1.88 ± 4% +0.3 2.14 ± 3% perf-profile.calltrace.cycles-pp.xfs_log_commit_cil.__xfs_trans_commit.xfs_remove.xfs_vn_unlink.vfs_rmdir
2.36 ± 4% +0.3 2.62 ± 5% perf-profile.calltrace.cycles-pp.xfs_log_commit_cil.__xfs_trans_commit.xfs_create.xfs_generic_create.vfs_mkdir
1.96 ± 4% +0.3 2.23 ± 3% perf-profile.calltrace.cycles-pp.__xfs_trans_commit.xfs_remove.xfs_vn_unlink.vfs_rmdir.do_rmdir
1.56 ± 2% +0.3 1.86 ± 10% perf-profile.calltrace.cycles-pp.xfs_log_commit_cil.__xfs_trans_commit.xfs_inactive_ifree.xfs_inactive.xfs_fs_destroy_inode
1.64 ± 2% +0.3 1.94 ± 9% perf-profile.calltrace.cycles-pp.__xfs_trans_commit.xfs_inactive_ifree.xfs_inactive.xfs_fs_destroy_inode.destroy_inode
0.27 ±100% +0.3 0.59 ± 2% perf-profile.calltrace.cycles-pp.xfs_dir2_node_addname_int.xfs_dir2_node_addname.xfs_dir_createname.xfs_create.xfs_generic_create
2.87 ± 5% +0.4 3.23 ± 3% perf-profile.calltrace.cycles-pp.xfs_btree_increment.xfs_check_agi_freecount.xfs_dialloc_ag.xfs_dir_ialloc.xfs_create
2.05 ± 4% +0.4 2.41 ± 2% perf-profile.calltrace.cycles-pp.xfs_dir2_node_removename.xfs_dir_removename.xfs_remove.xfs_vn_unlink.vfs_rmdir
2.27 ± 4% +0.4 2.63 ± 3% perf-profile.calltrace.cycles-pp.xfs_dir_removename.xfs_remove.xfs_vn_unlink.vfs_rmdir.do_rmdir
8.99 ± 3% +0.8 9.77 ± 2% perf-profile.calltrace.cycles-pp.xfs_check_agi_freecount.xfs_dialloc_ag.xfs_dir_ialloc.xfs_create.xfs_generic_create
0.43 ± 80% +0.8 1.23 ± 18% perf-profile.calltrace.cycles-pp.xfs_buf_find.xfs_buf_get_map.xfs_buf_read_map.xfs_trans_read_buf_map.xfs_read_agi
9.71 ± 3% +0.8 10.53 ± 2% perf-profile.calltrace.cycles-pp.xfs_dialloc_ag.xfs_dir_ialloc.xfs_create.xfs_generic_create.vfs_mkdir
5.58 ± 3% +0.9 6.47 ± 2% perf-profile.calltrace.cycles-pp.xfs_vn_unlink.vfs_rmdir.do_rmdir.do_syscall_64.entry_SYSCALL_64_after_hwframe
5.56 ± 3% +0.9 6.46 ± 2% perf-profile.calltrace.cycles-pp.xfs_remove.xfs_vn_unlink.vfs_rmdir.do_rmdir.do_syscall_64
5.13 ± 4% +0.9 6.02 ± 8% perf-profile.calltrace.cycles-pp.__percpu_counter_sum.xfs_fs_statfs.statfs_by_dentry.vfs_statfs.user_statfs
5.41 ± 4% +0.9 6.36 ± 9% perf-profile.calltrace.cycles-pp.vfs_statfs.user_statfs.__do_sys_statfs.do_syscall_64.entry_SYSCALL_64_after_hwframe
5.39 ± 4% +1.0 6.34 ± 9% perf-profile.calltrace.cycles-pp.statfs_by_dentry.vfs_statfs.user_statfs.__do_sys_statfs.do_syscall_64
5.35 ± 4% +1.0 6.31 ± 9% perf-profile.calltrace.cycles-pp.xfs_fs_statfs.statfs_by_dentry.vfs_statfs.user_statfs.__do_sys_statfs
6.25 ± 3% +1.0 7.30 ± 7% perf-profile.calltrace.cycles-pp.user_statfs.__do_sys_statfs.do_syscall_64.entry_SYSCALL_64_after_hwframe
6.36 ± 3% +1.1 7.42 ± 7% perf-profile.calltrace.cycles-pp.__do_sys_statfs.do_syscall_64.entry_SYSCALL_64_after_hwframe
11.53 ± 3% +1.2 12.69 perf-profile.calltrace.cycles-pp.xfs_dir_ialloc.xfs_create.xfs_generic_create.vfs_mkdir.do_mkdirat
10.20 ± 3% +1.2 11.36 ± 4% perf-profile.calltrace.cycles-pp.xfs_difree.xfs_ifree.xfs_inactive_ifree.xfs_inactive.xfs_fs_destroy_inode
11.37 ± 3% +1.4 12.73 ± 3% perf-profile.calltrace.cycles-pp.xfs_ifree.xfs_inactive_ifree.xfs_inactive.xfs_fs_destroy_inode.destroy_inode
15.83 ± 3% +1.7 17.50 perf-profile.calltrace.cycles-pp.xfs_create.xfs_generic_create.vfs_mkdir.do_mkdirat.do_syscall_64
13.23 ± 3% +1.7 14.91 ± 2% perf-profile.calltrace.cycles-pp.xfs_inactive.xfs_fs_destroy_inode.destroy_inode.vfs_rmdir.do_rmdir
13.28 ± 3% +1.7 14.96 ± 2% perf-profile.calltrace.cycles-pp.xfs_fs_destroy_inode.destroy_inode.vfs_rmdir.do_rmdir.do_syscall_64
13.22 ± 3% +1.7 14.90 ± 2% perf-profile.calltrace.cycles-pp.xfs_inactive_ifree.xfs_inactive.xfs_fs_destroy_inode.destroy_inode.vfs_rmdir
13.44 ± 3% +1.7 15.14 ± 2% perf-profile.calltrace.cycles-pp.destroy_inode.vfs_rmdir.do_rmdir.do_syscall_64.entry_SYSCALL_64_after_hwframe
15.95 ± 3% +1.7 17.64 perf-profile.calltrace.cycles-pp.xfs_generic_create.vfs_mkdir.do_mkdirat.do_syscall_64.entry_SYSCALL_64_after_hwframe
15.99 ± 3% +1.7 17.70 perf-profile.calltrace.cycles-pp.vfs_mkdir.do_mkdirat.do_syscall_64.entry_SYSCALL_64_after_hwframe
16.34 ± 3% +1.8 18.12 perf-profile.calltrace.cycles-pp.do_mkdirat.do_syscall_64.entry_SYSCALL_64_after_hwframe
19.38 ± 3% +2.6 21.99 perf-profile.calltrace.cycles-pp.vfs_rmdir.do_rmdir.do_syscall_64.entry_SYSCALL_64_after_hwframe
19.73 ± 3% +2.7 22.41 perf-profile.calltrace.cycles-pp.do_rmdir.do_syscall_64.entry_SYSCALL_64_after_hwframe
43.26 +5.5 48.78 perf-profile.calltrace.cycles-pp.do_syscall_64.entry_SYSCALL_64_after_hwframe
43.31 +5.5 48.83 perf-profile.calltrace.cycles-pp.entry_SYSCALL_64_after_hwframe
55.08 -5.3 49.83 perf-profile.children.cycles-pp.do_idle
55.09 -5.3 49.84 perf-profile.children.cycles-pp.secondary_startup_64_no_verify
55.09 -5.3 49.84 perf-profile.children.cycles-pp.cpu_startup_entry
8.30 ± 4% -4.2 4.14 ± 12% perf-profile.children.cycles-pp.asm_sysvec_apic_timer_interrupt
51.02 -4.1 46.94 ± 2% perf-profile.children.cycles-pp.cpuidle_enter
51.00 -4.1 46.93 ± 2% perf-profile.children.cycles-pp.cpuidle_enter_state
53.42 ± 2% -3.9 49.47 perf-profile.children.cycles-pp.start_secondary
7.39 ± 4% -3.8 3.59 ± 13% perf-profile.children.cycles-pp.sysvec_apic_timer_interrupt
5.09 ± 6% -2.7 2.42 ± 13% perf-profile.children.cycles-pp.__sysvec_apic_timer_interrupt
5.05 ± 6% -2.7 2.38 ± 13% perf-profile.children.cycles-pp.hrtimer_interrupt
2.50 ± 7% -1.6 0.93 ± 37% perf-profile.children.cycles-pp.ktime_get
1.85 ± 12% -1.1 0.74 ± 23% perf-profile.children.cycles-pp.clockevents_program_event
2.69 ± 13% -1.1 1.60 ± 19% perf-profile.children.cycles-pp.menu_select
2.38 ± 4% -1.1 1.29 ± 11% perf-profile.children.cycles-pp.__hrtimer_run_queues
1.71 ± 5% -0.8 0.86 ± 14% perf-profile.children.cycles-pp.tick_sched_timer
1.47 ± 5% -0.7 0.76 ± 16% perf-profile.children.cycles-pp.tick_sched_handle
1.43 ± 5% -0.7 0.74 ± 16% perf-profile.children.cycles-pp.update_process_times
1.50 ± 18% -0.7 0.83 ± 25% perf-profile.children.cycles-pp.tick_nohz_get_sleep_length
1.23 ± 23% -0.6 0.65 ± 31% perf-profile.children.cycles-pp.tick_nohz_next_event
1.05 ± 6% -0.4 0.61 ± 6% perf-profile.children.cycles-pp.irq_exit_rcu
0.68 ± 30% -0.4 0.29 ± 56% perf-profile.children.cycles-pp.timekeeping_max_deferment
0.50 ± 11% -0.4 0.14 ± 51% perf-profile.children.cycles-pp.ktime_get_update_offsets_now
0.78 ± 11% -0.3 0.44 ± 17% perf-profile.children.cycles-pp.scheduler_tick
0.85 ± 6% -0.3 0.51 ± 6% perf-profile.children.cycles-pp.__softirqentry_text_start
0.50 ± 15% -0.3 0.22 ± 25% perf-profile.children.cycles-pp.tick_nohz_irq_exit
0.34 ± 15% -0.2 0.13 ± 48% perf-profile.children.cycles-pp.calc_global_load_tick
0.45 ± 9% -0.2 0.26 ± 6% perf-profile.children.cycles-pp.rebalance_domains
0.46 ± 9% -0.2 0.27 ± 8% perf-profile.children.cycles-pp.lapic_next_deadline
0.85 ± 6% -0.2 0.66 ± 19% perf-profile.children.cycles-pp.process_one_work
0.46 ± 5% -0.2 0.28 ± 11% perf-profile.children.cycles-pp.native_irq_return_iret
0.92 ± 5% -0.2 0.73 ± 18% perf-profile.children.cycles-pp.ret_from_fork
0.85 ± 6% -0.2 0.67 ± 19% perf-profile.children.cycles-pp.worker_thread
0.91 ± 5% -0.2 0.73 ± 18% perf-profile.children.cycles-pp.kthread
0.48 ± 4% -0.1 0.33 ± 9% perf-profile.children.cycles-pp.sched_clock_cpu
0.37 ± 11% -0.1 0.23 ± 13% perf-profile.children.cycles-pp.read_tsc
0.42 ± 5% -0.1 0.29 ± 9% perf-profile.children.cycles-pp.native_sched_clock
0.34 ± 12% -0.1 0.22 ± 9% perf-profile.children.cycles-pp.perf_mux_hrtimer_handler
0.29 ± 9% -0.1 0.18 ± 7% perf-profile.children.cycles-pp.irqtime_account_irq
0.17 ± 12% -0.1 0.06 ± 54% perf-profile.children.cycles-pp._raw_spin_trylock
0.28 ± 7% -0.1 0.17 ± 7% perf-profile.children.cycles-pp.irq_work_run_list
0.27 ± 7% -0.1 0.17 ± 6% perf-profile.children.cycles-pp.asm_sysvec_irq_work
0.27 ± 7% -0.1 0.17 ± 6% perf-profile.children.cycles-pp.sysvec_irq_work
0.27 ± 7% -0.1 0.17 ± 6% perf-profile.children.cycles-pp.__sysvec_irq_work
0.27 ± 7% -0.1 0.17 ± 6% perf-profile.children.cycles-pp.irq_work_run
0.27 ± 7% -0.1 0.17 ± 6% perf-profile.children.cycles-pp.irq_work_single
0.27 ± 7% -0.1 0.17 ± 6% perf-profile.children.cycles-pp.printk
0.27 ± 7% -0.1 0.17 ± 6% perf-profile.children.cycles-pp.vprintk_emit
0.27 ± 7% -0.1 0.17 ± 6% perf-profile.children.cycles-pp.console_unlock
0.26 ± 8% -0.1 0.16 ± 8% perf-profile.children.cycles-pp.serial8250_console_write
0.25 ± 7% -0.1 0.15 ± 7% perf-profile.children.cycles-pp.uart_console_write
0.18 ± 25% -0.1 0.07 ± 37% perf-profile.children.cycles-pp.tsc_verify_tsc_adjust
0.25 ± 7% -0.1 0.15 ± 8% perf-profile.children.cycles-pp.wait_for_xmitr
0.18 ± 25% -0.1 0.08 ± 34% perf-profile.children.cycles-pp.arch_cpu_idle_enter
0.27 ± 11% -0.1 0.18 ± 12% perf-profile.children.cycles-pp.load_balance
0.24 ± 7% -0.1 0.15 ± 9% perf-profile.children.cycles-pp.serial8250_console_putchar
0.32 ± 4% -0.1 0.24 ± 13% perf-profile.children.cycles-pp.update_rq_clock
0.21 ± 13% -0.1 0.13 ± 10% perf-profile.children.cycles-pp.io_serial_in
0.21 ± 12% -0.1 0.14 ± 8% perf-profile.children.cycles-pp.hrtimer_next_event_without
0.20 ± 13% -0.1 0.14 ± 11% perf-profile.children.cycles-pp.find_busiest_group
0.09 ± 11% -0.1 0.03 ± 99% perf-profile.children.cycles-pp.timerqueue_del
0.15 ± 14% -0.1 0.09 ± 30% perf-profile.children.cycles-pp.rcu_sched_clock_irq
0.18 ± 7% -0.1 0.11 ± 17% perf-profile.children.cycles-pp.__hrtimer_next_event_base
0.19 ± 14% -0.1 0.13 ± 12% perf-profile.children.cycles-pp.update_sd_lb_stats
0.12 ± 13% -0.1 0.07 ± 11% perf-profile.children.cycles-pp.__remove_hrtimer
0.14 ± 11% -0.1 0.09 ± 11% perf-profile.children.cycles-pp.run_rebalance_domains
0.14 ± 13% -0.0 0.09 ± 11% perf-profile.children.cycles-pp.hrtimer_update_next_event
0.12 ± 16% -0.0 0.07 ± 19% perf-profile.children.cycles-pp.update_irq_load_avg
0.14 ± 13% -0.0 0.09 ± 20% perf-profile.children.cycles-pp.update_blocked_averages
0.12 ± 10% +0.0 0.14 ± 5% perf-profile.children.cycles-pp.update_curr
0.07 ± 7% +0.0 0.09 ± 7% perf-profile.children.cycles-pp.tick_nohz_idle_exit
0.08 ± 30% +0.0 0.11 ± 18% perf-profile.children.cycles-pp.map_id_range_down
0.04 ± 73% +0.0 0.08 ± 13% perf-profile.children.cycles-pp.xfs_verify_agbno
0.20 ± 15% +0.0 0.25 ± 7% perf-profile.children.cycles-pp.filename_parentat
0.25 ± 14% +0.0 0.30 ± 9% perf-profile.children.cycles-pp.xfs_lookup_get_search_key
0.37 ± 9% +0.1 0.43 ± 7% perf-profile.children.cycles-pp.kmem_cache_alloc
0.32 ± 7% +0.1 0.39 ± 5% perf-profile.children.cycles-pp.__xfs_dir3_free_read
0.64 ± 6% +0.1 0.72 ± 6% perf-profile.children.cycles-pp.filename_lookup
0.57 ± 7% +0.1 0.66 ± 4% perf-profile.children.cycles-pp.xfs_inobt_get_maxrecs
0.50 ± 7% +0.1 0.59 ± 2% perf-profile.children.cycles-pp.xfs_dir2_node_addname_int
0.36 ± 6% +0.1 0.46 ± 9% perf-profile.children.cycles-pp.xfs_imap_to_bp
0.33 ± 2% +0.1 0.43 ± 11% perf-profile.children.cycles-pp.xfs_dir3_data_read
0.45 ± 6% +0.1 0.54 ± 6% perf-profile.children.cycles-pp.xfs_buf_rele
0.54 ± 7% +0.1 0.64 ± 8% perf-profile.children.cycles-pp.xfs_inode_item_format
0.60 ± 4% +0.1 0.71 ± 8% perf-profile.children.cycles-pp.xfs_trans_log_inode
1.21 ± 4% +0.1 1.34 ± 3% perf-profile.children.cycles-pp.xfs_buf_unlock
0.75 ± 3% +0.1 0.89 ± 8% perf-profile.children.cycles-pp.xfs_dir2_leafn_remove
0.70 ± 6% +0.1 0.84 ± 10% perf-profile.children.cycles-pp.xfs_perag_get
0.77 ± 3% +0.1 0.91 ± 7% perf-profile.children.cycles-pp.xfs_iunlink
1.15 ± 2% +0.1 1.29 ± 3% perf-profile.children.cycles-pp.up
1.08 ± 3% +0.1 1.23 ± 6% perf-profile.children.cycles-pp.xfs_btree_read_buf_block
1.29 ± 4% +0.2 1.46 ± 2% perf-profile.children.cycles-pp.xfs_buf_item_release
0.83 ± 3% +0.2 1.00 ± 7% perf-profile.children.cycles-pp.down
0.80 ± 3% +0.2 0.98 ± 7% perf-profile.children.cycles-pp.__down
0.86 ± 3% +0.2 1.04 ± 6% perf-profile.children.cycles-pp.xfs_buf_lock
1.22 ± 4% +0.2 1.40 ± 6% perf-profile.children.cycles-pp.xfs_btree_lookup_get_block
1.19 ± 3% +0.2 1.38 ± 5% perf-profile.children.cycles-pp.memcpy_erms
0.94 ± 8% +0.2 1.13 ± 5% perf-profile.children.cycles-pp.xfs_iunlink_remove
1.39 ± 2% +0.2 1.58 ± 4% perf-profile.children.cycles-pp.xfs_buf_item_format_segment
1.47 ± 2% +0.2 1.67 ± 4% perf-profile.children.cycles-pp.xfs_buf_item_format
0.95 ± 8% +0.2 1.16 ± 7% perf-profile.children.cycles-pp.xfs_dialloc_select_ag
1.47 ± 2% +0.2 1.70 ± 2% perf-profile.children.cycles-pp.xfs_errortag_test
1.61 ± 5% +0.3 1.87 perf-profile.children.cycles-pp.xfs_da3_node_lookup_int
1.41 ± 7% +0.3 1.69 ± 2% perf-profile.children.cycles-pp.xfs_da_read_buf
1.89 ± 3% +0.3 2.19 ± 4% perf-profile.children.cycles-pp.xfs_btree_lookup
1.82 ± 4% +0.3 2.16 ± 5% perf-profile.children.cycles-pp.xfs_read_agi
2.05 ± 4% +0.4 2.41 ± 2% perf-profile.children.cycles-pp.xfs_dir2_node_removename
2.27 ± 4% +0.4 2.63 ± 3% perf-profile.children.cycles-pp.xfs_dir_removename
3.93 ± 4% +0.4 4.35 ± 3% perf-profile.children.cycles-pp.__xfs_btree_check_sblock
2.70 +0.4 3.14 ± 5% perf-profile.children.cycles-pp.xlog_cil_insert_items
2.71 ± 2% +0.5 3.19 ± 3% perf-profile.children.cycles-pp.xfs_buf_find
2.93 ± 3% +0.5 3.45 ± 3% perf-profile.children.cycles-pp.xfs_buf_get_map
2.96 ± 2% +0.5 3.51 ± 3% perf-profile.children.cycles-pp.xfs_buf_read_map
4.06 ± 3% +0.7 4.77 ± 4% perf-profile.children.cycles-pp.xfs_trans_read_buf_map
6.62 +0.8 7.39 ± 3% perf-profile.children.cycles-pp.xfs_btree_check_sblock
9.72 ± 3% +0.8 10.54 ± 2% perf-profile.children.cycles-pp.xfs_dialloc_ag
5.92 ± 2% +0.8 6.75 ± 4% perf-profile.children.cycles-pp.xfs_log_commit_cil
6.11 ± 2% +0.9 6.97 ± 4% perf-profile.children.cycles-pp.__xfs_trans_commit
5.58 ± 3% +0.9 6.47 ± 2% perf-profile.children.cycles-pp.xfs_vn_unlink
5.56 ± 3% +0.9 6.46 ± 2% perf-profile.children.cycles-pp.xfs_remove
5.15 ± 4% +0.9 6.07 ± 8% perf-profile.children.cycles-pp.__percpu_counter_sum
10.88 ± 2% +0.9 11.80 ± 3% perf-profile.children.cycles-pp.xfs_inobt_get_rec
5.41 ± 4% +0.9 6.36 ± 9% perf-profile.children.cycles-pp.vfs_statfs
5.36 ± 4% +1.0 6.31 ± 9% perf-profile.children.cycles-pp.xfs_fs_statfs
5.39 ± 4% +1.0 6.34 ± 9% perf-profile.children.cycles-pp.statfs_by_dentry
6.25 ± 3% +1.0 7.30 ± 7% perf-profile.children.cycles-pp.user_statfs
6.36 ± 3% +1.1 7.42 ± 7% perf-profile.children.cycles-pp.__do_sys_statfs
11.53 ± 3% +1.2 12.69 perf-profile.children.cycles-pp.xfs_dir_ialloc
10.20 ± 3% +1.2 11.36 ± 4% perf-profile.children.cycles-pp.xfs_difree
11.37 ± 3% +1.4 12.74 ± 3% perf-profile.children.cycles-pp.xfs_ifree
15.83 ± 3% +1.7 17.50 perf-profile.children.cycles-pp.xfs_create
13.28 ± 3% +1.7 14.96 ± 2% perf-profile.children.cycles-pp.xfs_fs_destroy_inode
13.22 ± 3% +1.7 14.90 ± 2% perf-profile.children.cycles-pp.xfs_inactive_ifree
13.23 ± 3% +1.7 14.92 ± 2% perf-profile.children.cycles-pp.xfs_inactive
13.44 ± 3% +1.7 15.14 ± 2% perf-profile.children.cycles-pp.destroy_inode
15.95 ± 3% +1.7 17.65 perf-profile.children.cycles-pp.xfs_generic_create
15.99 ± 3% +1.7 17.70 perf-profile.children.cycles-pp.vfs_mkdir
16.34 ± 3% +1.8 18.12 perf-profile.children.cycles-pp.do_mkdirat
18.25 ± 2% +1.8 20.07 ± 3% perf-profile.children.cycles-pp.xfs_check_agi_freecount
19.38 ± 3% +2.6 22.00 perf-profile.children.cycles-pp.vfs_rmdir
19.73 ± 3% +2.7 22.42 perf-profile.children.cycles-pp.do_rmdir
43.47 +5.4 48.90 perf-profile.children.cycles-pp.do_syscall_64
43.51 +5.4 48.95 perf-profile.children.cycles-pp.entry_SYSCALL_64_after_hwframe
2.19 ± 7% -1.5 0.73 ± 46% perf-profile.self.cycles-pp.ktime_get
1.09 ± 5% -0.4 0.67 ± 7% perf-profile.self.cycles-pp.cpuidle_enter_state
0.68 ± 30% -0.4 0.28 ± 57% perf-profile.self.cycles-pp.timekeeping_max_deferment
0.45 ± 11% -0.3 0.11 ± 65% perf-profile.self.cycles-pp.ktime_get_update_offsets_now
0.37 ± 31% -0.3 0.12 ± 20% perf-profile.self.cycles-pp.update_process_times
0.34 ± 15% -0.2 0.13 ± 48% perf-profile.self.cycles-pp.calc_global_load_tick
0.46 ± 9% -0.2 0.27 ± 8% perf-profile.self.cycles-pp.lapic_next_deadline
0.46 ± 5% -0.2 0.28 ± 11% perf-profile.self.cycles-pp.native_irq_return_iret
0.36 ± 11% -0.1 0.22 ± 12% perf-profile.self.cycles-pp.read_tsc
0.41 ± 6% -0.1 0.29 ± 10% perf-profile.self.cycles-pp.native_sched_clock
0.17 ± 12% -0.1 0.06 ± 54% perf-profile.self.cycles-pp._raw_spin_trylock
0.17 ± 25% -0.1 0.07 ± 39% perf-profile.self.cycles-pp.tsc_verify_tsc_adjust
0.21 ± 13% -0.1 0.13 ± 10% perf-profile.self.cycles-pp.io_serial_in
0.13 ± 11% -0.1 0.07 ± 52% perf-profile.self.cycles-pp.rcu_sched_clock_irq
0.10 ± 25% -0.1 0.04 ± 75% perf-profile.self.cycles-pp.asm_sysvec_apic_timer_interrupt
0.15 ± 9% -0.0 0.10 ± 20% perf-profile.self.cycles-pp.__hrtimer_next_event_base
0.12 ± 14% -0.0 0.07 ± 19% perf-profile.self.cycles-pp.update_irq_load_avg
0.10 ± 16% -0.0 0.06 ± 9% perf-profile.self.cycles-pp.irqtime_account_irq
0.13 ± 15% -0.0 0.09 ± 16% perf-profile.self.cycles-pp.update_sd_lb_stats
0.05 ± 47% +0.0 0.08 ± 18% perf-profile.self.cycles-pp.schedule_timeout
0.14 ± 11% +0.0 0.17 ± 4% perf-profile.self.cycles-pp.xfs_buf_get_map
0.10 ± 17% +0.0 0.13 ± 8% perf-profile.self.cycles-pp.xfs_bmapi_read
0.04 ± 72% +0.0 0.08 ± 13% perf-profile.self.cycles-pp.xfs_verify_agbno
0.32 ± 8% +0.1 0.38 ± 8% perf-profile.self.cycles-pp.xlog_cil_insert_items
0.47 ± 9% +0.1 0.54 ± 6% perf-profile.self.cycles-pp.xfs_verify_dir_ino
0.45 ± 6% +0.1 0.52 ± 4% perf-profile.self.cycles-pp.xfs_check_agi_freecount
0.47 ± 6% +0.1 0.56 ± 5% perf-profile.self.cycles-pp.xfs_inobt_get_maxrecs
0.58 ± 6% +0.1 0.70 ± 8% perf-profile.self.cycles-pp.xfs_perag_get
1.17 ± 3% +0.2 1.36 ± 6% perf-profile.self.cycles-pp.memcpy_erms
1.43 +0.2 1.66 ± 2% perf-profile.self.cycles-pp.xfs_errortag_test
3.34 ± 5% +0.4 3.71 ± 3% perf-profile.self.cycles-pp.__xfs_btree_check_sblock
2.62 ± 5% +0.5 3.16 ± 11% perf-profile.self.cycles-pp.__percpu_counter_sum
stress-ng.dir.ops
3e+06 +-----------------------------------------------------------------+
| OO O O |
2.8e+06 |-+ O OO O O OO O O O OO OO O OO OO O OO OO OO O O |
2.6e+06 |-+ O |
| O O |
2.4e+06 |-+ O O O |
2.2e+06 |-+ O |
| |
2e+06 |-+ |
1.8e+06 |-+ |
| |
1.6e+06 |.+ .+ .+ +.+ .+ .+ .+.++.+.++.+.+ .+. .+ |
1.4e+06 |-++.+ +.+ :+ + +.+ +.+.++ + ++ +.+.++.+.++ |
| + | 1.2e+06 +-----------------------------------------------------------------+
stress-ng.dir.ops_per_sec
50000 +-------------------------------------------------------------------+
| OO O O |
45000 |-+ O O O O O O O O O OO OO O O O O OO O OO O OO O O |
| O O |
| O |
40000 |-+ O O O O |
| O |
35000 |-+ |
| |
30000 |-+ |
| |
|.+ .+. + .+ +. .+ +. +.+.+. +.+. +. |
25000 |-++.+ + + + + + : +.+ +.+.+ + + + ++.+.+ +.+.++.+.++ |
| + + + + |
20000 +-------------------------------------------------------------------+ [*] bisect-good sample
[O] bisect-bad sample
Disclaimer:
Results have been estimated based on internal Intel analysis and are provided for informational purposes only. Any difference in system hardware or software design or configuration may affect actual performance.
---
0DAY/LKP+ Test Infrastructure Open Source Technology Center
https://lists.01.org/hyperkitty/list/[email protected] Intel Corporation
Thanks,
Oliver Sang
#
# Automatically generated file; DO NOT EDIT. # Linux/x86_64 5.13.0-rc2 Kernel Configuration #CONFIG_CC_VERSION_TEXT="gcc-9 (Debian 9.3.0-22) 9.3.0" CONFIG_CC_IS_GCC=yCONFIG_GCC_VERSION=90300 CONFIG_CLANG_VERSION=0CONFIG_AS_IS_GNU=yCONFIG_AS_VERSION=23502CONFIG_LD_IS_BFD=yCONFIG_LD_VERSION=23502CONFIG_LLD_VERSION=0CONFIG_CC_CAN_LINK=y CONFIG_CC_CAN_LINK_STATIC=y CONFIG_CC_HAS_ASM_GOTO=y CONFIG_CC_HAS_ASM_INLINE=yCONFIG_IRQ_WORK=y CONFIG_BUILDTIME_TABLE_SORT=y CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not setCONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_BUILD_SALT=""CONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_HAVE_KERNEL_XZ=yCONFIG_HAVE_KERNEL_LZO=yCONFIG_HAVE_KERNEL_LZ4=yCONFIG_HAVE_KERNEL_ZSTD=yCONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not setCONFIG_DEFAULT_INIT=""CONFIG_DEFAULT_HOSTNAME="(none)"CONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not setCONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not setCONFIG_AUDIT=yCONFIG_HAVE_ARCH_AUDITSYSCALL=yCONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#CONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_IRQ_SHOW=yCONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=yCONFIG_GENERIC_PENDING_IRQ=yCONFIG_GENERIC_IRQ_MIGRATION=yCONFIG_GENERIC_IRQ_INJECTION=yCONFIG_HARDIRQS_SW_RESEND=yCONFIG_IRQ_DOMAIN=yCONFIG_IRQ_DOMAIN_HIERARCHY=yCONFIG_GENERIC_MSI_IRQ=yCONFIG_GENERIC_MSI_IRQ_DOMAIN=yCONFIG_IRQ_MSI_IOMMU=yCONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=yCONFIG_GENERIC_IRQ_RESERVATION_MODE=yCONFIG_IRQ_FORCED_THREADING=yCONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=yCONFIG_ARCH_CLOCKSOURCE_INIT=yCONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=yCONFIG_GENERIC_TIME_VSYSCALL=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_CLOCKEVENTS_BROADCAST=yCONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=yCONFIG_GENERIC_CMOS_UPDATE=yCONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=yCONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
#
# Timers subsystem
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not setCONFIG_NO_HZ_FULL=yCONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not setCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
# CONFIG_PREEMPT_NONE is not setCONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not setCONFIG_PREEMPT_COUNT=y
#
# CPU/Task time and stats accounting
#CONFIG_VIRT_CPU_ACCOUNTING=yCONFIG_VIRT_CPU_ACCOUNTING_GEN=yCONFIG_IRQ_TIME_ACCOUNTING=yCONFIG_HAVE_SCHED_AVG_IRQ=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=yCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=yCONFIG_TASK_XACCT=yCONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not setCONFIG_SRCU=yCONFIG_TREE_SRCU=yCONFIG_TASKS_RCU_GENERIC=yCONFIG_TASKS_RCU=yCONFIG_TASKS_RUDE_RCU=yCONFIG_TASKS_TRACE_RCU=yCONFIG_RCU_STALL_COMMON=yCONFIG_RCU_NEED_SEGCBLIST=yCONFIG_RCU_NOCB_CPU=y
# end of RCU Subsystem
CONFIG_BUILD_BIN2C=yCONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not setCONFIG_LOG_BUF_SHIFT=20CONFIG_LOG_CPU_MAX_BUF_SHIFT=12CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# CONFIG_UCLAMP_TASK is not set
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=yCONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=yCONFIG_CC_HAS_INT128=yCONFIG_ARCH_SUPPORTS_INT128=yCONFIG_NUMA_BALANCING=yCONFIG_NUMA_BALANCING_DEFAULT_ENABLED=yCONFIG_CGROUPS=yCONFIG_PAGE_COUNTER=yCONFIG_MEMCG=yCONFIG_MEMCG_SWAP=yCONFIG_MEMCG_KMEM=yCONFIG_BLK_CGROUP=yCONFIG_CGROUP_WRITEBACK=yCONFIG_CGROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=yCONFIG_CFS_BANDWIDTH=yCONFIG_RT_GROUP_SCHED=yCONFIG_CGROUP_PIDS=yCONFIG_CGROUP_RDMA=yCONFIG_CGROUP_FREEZER=yCONFIG_CGROUP_HUGETLB=yCONFIG_CPUSETS=yCONFIG_PROC_PID_CPUSET=yCONFIG_CGROUP_DEVICE=yCONFIG_CGROUP_CPUACCT=yCONFIG_CGROUP_PERF=yCONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not setCONFIG_SOCK_CGROUP_DATA=yCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_TIME_NS=yCONFIG_IPC_NS=yCONFIG_USER_NS=yCONFIG_PID_NS=yCONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not setCONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not setCONFIG_RELAY=yCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=yCONFIG_RD_LZMA=yCONFIG_RD_XZ=yCONFIG_RD_LZO=yCONFIG_RD_LZ4=yCONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not setCONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_LD_ORPHAN_WARN=yCONFIG_SYSCTL=yCONFIG_HAVE_UID16=yCONFIG_SYSCTL_EXCEPTION_TRACE=yCONFIG_HAVE_PCSPKR_PLATFORM=yCONFIG_BPF=y
# CONFIG_EXPERT is not setCONFIG_UID16=yCONFIG_MULTIUSER=yCONFIG_SGETMASK_SYSCALL=yCONFIG_SYSFS_SYSCALL=yCONFIG_FHANDLE=yCONFIG_POSIX_TIMERS=yCONFIG_PRINTK=yCONFIG_PRINTK_NMI=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_FUTEX_PI=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_IO_URING=yCONFIG_ADVISE_SYSCALLS=yCONFIG_HAVE_ARCH_USERFAULTFD_WP=yCONFIG_HAVE_ARCH_USERFAULTFD_MINOR=yCONFIG_MEMBARRIER=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_ABSOLUTE_PERCPU=yCONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_BPF_LSM is not setCONFIG_BPF_SYSCALL=yCONFIG_ARCH_WANT_DEFAULT_BPF_JIT=yCONFIG_BPF_JIT_ALWAYS_ON=yCONFIG_BPF_JIT_DEFAULT_ON=y
# CONFIG_BPF_PRELOAD is not setCONFIG_USERFAULTFD=yCONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=yCONFIG_KCMP=yCONFIG_RSEQ=y
# CONFIG_EMBEDDED is not setCONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_VM_EVENT_COUNTERS=yCONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not setCONFIG_SLUB=yCONFIG_SLAB_MERGE_DEFAULT=yCONFIG_SLAB_FREELIST_RANDOM=y
# CONFIG_SLAB_FREELIST_HARDENED is not setCONFIG_SHUFFLE_PAGE_ALLOCATOR=yCONFIG_SLUB_CPU_PARTIAL=yCONFIG_SYSTEM_DATA_VERIFICATION=yCONFIG_PROFILING=yCONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_64BIT=yCONFIG_X86_64=yCONFIG_X86=yCONFIG_INSTRUCTION_DECODER=yCONFIG_OUTPUT_FORMAT="elf64-x86-64"CONFIG_LOCKDEP_SUPPORT=yCONFIG_STACKTRACE_SUPPORT=yCONFIG_MMU=yCONFIG_ARCH_MMAP_RND_BITS_MIN=28CONFIG_ARCH_MMAP_RND_BITS_MAX=32CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16CONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_BUG_RELATIVE_POINTERS=yCONFIG_ARCH_MAY_HAVE_PC_FDC=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_ARCH_HAS_CPU_RELAX=yCONFIG_ARCH_HAS_FILTER_PGPROT=yCONFIG_HAVE_SETUP_PER_CPU_AREA=yCONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=yCONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=yCONFIG_ARCH_HIBERNATION_POSSIBLE=yCONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ARCH_WANT_GENERAL_HUGETLB=yCONFIG_ZONE_DMA32=yCONFIG_AUDIT_ARCH=yCONFIG_HAVE_INTEL_TXT=yCONFIG_X86_64_SMP=yCONFIG_ARCH_SUPPORTS_UPROBES=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_DYNAMIC_PHYSICAL_MASK=yCONFIG_PGTABLE_LEVELS=5CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#CONFIG_ZONE_DMA=yCONFIG_SMP=yCONFIG_X86_FEATURE_NAMES=yCONFIG_X86_X2APIC=yCONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not setCONFIG_RETPOLINE=yCONFIG_X86_CPU_RESCTRL=yCONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not setCONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not setCONFIG_X86_INTEL_LPSS=yCONFIG_X86_AMD_PLATFORM_DEVICE=yCONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not setCONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not setCONFIG_HYPERVISOR_GUEST=yCONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not setCONFIG_PARAVIRT_SPINLOCKS=yCONFIG_X86_HV_CALLBACK_VECTOR=yCONFIG_XEN=y
# CONFIG_XEN_PV is not setCONFIG_XEN_PVHVM=yCONFIG_XEN_PVHVM_SMP=yCONFIG_XEN_PVHVM_GUEST=yCONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_XEN_PVH is not setCONFIG_KVM_GUEST=yCONFIG_ARCH_CPUIDLE_HALTPOLL=y
# CONFIG_PVH is not setCONFIG_PARAVIRT_TIME_ACCOUNTING=yCONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
# CONFIG_ACRN_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not setCONFIG_GENERIC_CPU=yCONFIG_X86_INTERNODE_CACHE_SHIFT=6CONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=64CONFIG_X86_DEBUGCTLMSR=yCONFIG_IA32_FEAT_CTL=yCONFIG_X86_VMX_FEATURE_NAMES=yCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_HYGON=yCONFIG_CPU_SUP_CENTAUR=yCONFIG_CPU_SUP_ZHAOXIN=yCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=y
# CONFIG_GART_IOMMU is not setCONFIG_MAXSMP=yCONFIG_NR_CPUS_RANGE_BEGIN=8192CONFIG_NR_CPUS_RANGE_END=8192CONFIG_NR_CPUS_DEFAULT=8192CONFIG_NR_CPUS=8192CONFIG_SCHED_SMT=yCONFIG_SCHED_MC=yCONFIG_SCHED_MC_PRIO=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=yCONFIG_X86_MCE=yCONFIG_X86_MCELOG_LEGACY=yCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=yCONFIG_X86_MCE_THRESHOLD=yCONFIG_X86_MCE_INJECT=m
#
# Performance monitoring
#CONFIG_PERF_EVENTS_INTEL_UNCORE=mCONFIG_PERF_EVENTS_INTEL_RAPL=mCONFIG_PERF_EVENTS_INTEL_CSTATE=mCONFIG_PERF_EVENTS_AMD_POWER=m
# end of Performance monitoring
CONFIG_X86_16BIT=yCONFIG_X86_ESPFIX64=y CONFIG_X86_VSYSCALL_EMULATION=y CONFIG_X86_IOPL_IOPERM=yCONFIG_I8K=mCONFIG_MICROCODE=yCONFIG_MICROCODE_INTEL=yCONFIG_MICROCODE_AMD=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=yCONFIG_X86_CPUID=yCONFIG_X86_5LEVEL=yCONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set CONFIG_AMD_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT is not set CONFIG_NUMA=yCONFIG_AMD_NUMA=yCONFIG_X86_64_ACPI_NUMA=yCONFIG_NUMA_EMU=yCONFIG_NODES_SHIFT=10 CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y
# CONFIG_ARCH_MEMORY_PROBE is not set CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_X86_PMEM_LEGACY_DEVICE=y CONFIG_X86_PMEM_LEGACY=m CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set CONFIG_X86_RESERVE_LOW=64CONFIG_MTRR=yCONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=yCONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_ARCH_RANDOM=yCONFIG_X86_SMAP=yCONFIG_X86_UMIP=y CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_X86_SGX is not setCONFIG_EFI=yCONFIG_EFI_STUB=yCONFIG_EFI_MIXED=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not setCONFIG_HZ_1000=yCONFIG_HZ=1000CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=yCONFIG_KEXEC_FILE=y CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
# CONFIG_KEXEC_SIG is not set CONFIG_CRASH_DUMP=yCONFIG_KEXEC_JUMP=y CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=yCONFIG_RANDOMIZE_BASE=yCONFIG_X86_NEED_RELOCS=y CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_DYNAMIC_MEMORY_LAYOUT=y CONFIG_RANDOMIZE_MEMORY=y CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa CONFIG_HOTPLUG_CPU=y CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set CONFIG_MODIFY_LDT_SYSCALL=y CONFIG_HAVE_LIVEPATCH=yCONFIG_LIVEPATCH=y
# end of Processor type and features
CONFIG_ARCH_HAS_ADD_PAGES=yCONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=yCONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#CONFIG_ARCH_HIBERNATION_HEADER=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=yCONFIG_HIBERNATE_CALLBACKS=yCONFIG_HIBERNATION=yCONFIG_HIBERNATION_SNAPSHOT_DEV=yCONFIG_PM_STD_PARTITION=""CONFIG_PM_SLEEP=yCONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not setCONFIG_PM=yCONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not setCONFIG_PM_SLEEP_DEBUG=y
# CONFIG_PM_TRACE_RTC is not setCONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ENERGY_MODEL is not setCONFIG_ARCH_SUPPORTS_ACPI=yCONFIG_ACPI=yCONFIG_ACPI_LEGACY_TABLES_LOOKUP=yCONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=yCONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not setCONFIG_ACPI_SPCR_TABLE=y
# CONFIG_ACPI_FPDT is not setCONFIG_ACPI_LPIT=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_REV_OVERRIDE_POSSIBLE=yCONFIG_ACPI_EC_DEBUGFS=mCONFIG_ACPI_AC=yCONFIG_ACPI_BATTERY=yCONFIG_ACPI_BUTTON=yCONFIG_ACPI_VIDEO=mCONFIG_ACPI_FAN=yCONFIG_ACPI_TAD=mCONFIG_ACPI_DOCK=yCONFIG_ACPI_CPU_FREQ_PSS=yCONFIG_ACPI_PROCESSOR_CSTATE=yCONFIG_ACPI_PROCESSOR_IDLE=yCONFIG_ACPI_CPPC_LIB=yCONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_IPMI=mCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_PROCESSOR_AGGREGATOR=mCONFIG_ACPI_THERMAL=yCONFIG_ACPI_PLATFORM_PROFILE=mCONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=yCONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not setCONFIG_ACPI_PCI_SLOT=yCONFIG_ACPI_CONTAINER=yCONFIG_ACPI_HOTPLUG_MEMORY=yCONFIG_ACPI_HOTPLUG_IOAPIC=yCONFIG_ACPI_SBS=mCONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not setCONFIG_ACPI_BGRT=yCONFIG_ACPI_NFIT=m
# CONFIG_NFIT_SECURITY_DEBUG is not setCONFIG_ACPI_NUMA=y
# CONFIG_ACPI_HMAT is not setCONFIG_HAVE_ACPI_APEI=yCONFIG_HAVE_ACPI_APEI_NMI=yCONFIG_ACPI_APEI=yCONFIG_ACPI_APEI_GHES=yCONFIG_ACPI_APEI_PCIEAER=yCONFIG_ACPI_APEI_MEMORY_FAILURE=yCONFIG_ACPI_APEI_EINJ=mCONFIG_ACPI_APEI_ERST_DEBUG=y
# CONFIG_ACPI_DPTF is not setCONFIG_ACPI_WATCHDOG=yCONFIG_ACPI_EXTLOG=mCONFIG_ACPI_ADXL=y
# CONFIG_ACPI_CONFIGFS is not setCONFIG_PMIC_OPREGION=yCONFIG_X86_PM_TIMER=y
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_ATTR_SET=y CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
#
# CPU frequency scaling drivers
#CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not setCONFIG_X86_ACPI_CPUFREQ=mCONFIG_X86_ACPI_CPUFREQ_CPB=yCONFIG_X86_POWERNOW_K8=mCONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not setCONFIG_X86_P4_CLOCKMOD=m
#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=m # end of CPU Frequency scaling
#
# CPU Idle
#CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not setCONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# CONFIG_CPU_IDLE_GOV_HALTPOLL is not setCONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle
CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#CONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_XEN=yCONFIG_MMCONF_FAM10H=yCONFIG_ISA_DMA_API=yCONFIG_AMD_NB=y
# CONFIG_X86_SYSFB is not set
# end of Bus options (PCI etc.)
#
# Binary Emulations
#CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32 is not setCONFIG_COMPAT_32=yCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_SYSVIPC_COMPAT=y
# end of Binary Emulations
#
# Firmware Drivers
#CONFIG_EDD=m
# CONFIG_EDD_OFF is not setCONFIG_FIRMWARE_MEMMAP=yCONFIG_DMIID=yCONFIG_DMI_SYSFS=yCONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT is not setCONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#CONFIG_EFI_VARS=yCONFIG_EFI_ESRT=yCONFIG_EFI_VARS_PSTORE=yCONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=yCONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not setCONFIG_EFI_RUNTIME_WRAPPERS=yCONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not setCONFIG_APPLE_PROPERTIES=y
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_EFI_RCI2_TABLE is not set
# CONFIG_EFI_DISABLE_PCI_DMA is not set
# end of EFI (Extensible Firmware Interface) Support
CONFIG_UEFI_CPER=yCONFIG_UEFI_CPER_X86=yCONFIG_EFI_DEV_PATH_PARSER=yCONFIG_EFI_EARLYCON=yCONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
#
# Tegra firmware driver
#
# end of Tegra firmware driver # end of Firmware Drivers
CONFIG_HAVE_KVM=yCONFIG_HAVE_KVM_IRQCHIP=yCONFIG_HAVE_KVM_IRQFD=yCONFIG_HAVE_KVM_IRQ_ROUTING=yCONFIG_HAVE_KVM_EVENTFD=yCONFIG_KVM_MMIO=yCONFIG_KVM_ASYNC_PF=yCONFIG_HAVE_KVM_MSI=yCONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=yCONFIG_KVM_VFIO=yCONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=yCONFIG_KVM_COMPAT=yCONFIG_HAVE_KVM_IRQ_BYPASS=yCONFIG_HAVE_KVM_NO_POLL=yCONFIG_KVM_XFER_TO_GUEST_WORK=yCONFIG_VIRTUALIZATION=yCONFIG_KVM=mCONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_XEN is not setCONFIG_KVM_MMU_AUDIT=yCONFIG_AS_AVX512=yCONFIG_AS_SHA1_NI=yCONFIG_AS_SHA256_NI=yCONFIG_AS_TPAUSE=y
#
# General architecture-dependent options
#CONFIG_CRASH_CORE=yCONFIG_KEXEC_CORE=yCONFIG_HOTPLUG_SMT=yCONFIG_GENERIC_ENTRY=yCONFIG_KPROBES=yCONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set CONFIG_OPTPROBES=y CONFIG_KPROBES_ON_FTRACE=yCONFIG_UPROBES=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_KRETPROBES=y CONFIG_USER_RETURN_NOTIFIER=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_KPROBES_ON_FTRACE=y CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y CONFIG_HAVE_NMI=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_ARCH_HAS_FORTIFY_SOURCE=y CONFIG_ARCH_HAS_SET_MEMORY=y CONFIG_ARCH_HAS_SET_DIRECT_MAP=y CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y CONFIG_HAVE_ASM_MODVERSIONS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_RSEQ=y CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y CONFIG_HAVE_PERF_EVENTS_NMI=y CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y CONFIG_MMU_GATHER_TABLE_FREE=y CONFIG_MMU_GATHER_RCU_TABLE_FREE=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y CONFIG_HAVE_CMPXCHG_LOCAL=y CONFIG_HAVE_CMPXCHG_DOUBLE=y CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y CONFIG_HAVE_ARCH_SECCOMP=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_SECCOMP=yCONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set CONFIG_HAVE_ARCH_STACKLEAK=y CONFIG_HAVE_STACKPROTECTOR=y CONFIG_STACKPROTECTOR=y CONFIG_STACKPROTECTOR_STRONG=y CONFIG_ARCH_SUPPORTS_LTO_CLANG=y CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y CONFIG_LTO_NONE=y CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y CONFIG_HAVE_CONTEXT_TRACKING=y CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_MOVE_PUD=y CONFIG_HAVE_MOVE_PMD=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y CONFIG_HAVE_ARCH_HUGE_VMAP=y CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y CONFIG_HAVE_ARCH_SOFT_DIRTY=y CONFIG_HAVE_MOD_ARCH_SPECIFIC=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y CONFIG_ARCH_HAS_ELF_RANDOMIZE=y CONFIG_HAVE_ARCH_MMAP_RND_BITS=y CONFIG_HAVE_EXIT_THREAD=y CONFIG_ARCH_MMAP_RND_BITS=28 CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8 CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y CONFIG_HAVE_STACK_VALIDATION=y CONFIG_HAVE_RELIABLE_STACKTRACE=y CONFIG_OLD_SIGSUSPEND3=y CONFIG_COMPAT_OLD_SIGACTION=y CONFIG_COMPAT_32BIT_TIME=y CONFIG_HAVE_ARCH_VMAP_STACK=y CONFIG_VMAP_STACK=y CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y # CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y CONFIG_STRICT_KERNEL_RWX=y CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y CONFIG_STRICT_MODULE_RWX=y CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set CONFIG_ARCH_HAS_MEM_ENCRYPT=y CONFIG_HAVE_STATIC_CALL=y CONFIG_HAVE_STATIC_CALL_INLINE=y CONFIG_HAVE_PREEMPT_DYNAMIC=y CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not setCONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULE_SIG_FORMAT=yCONFIG_MODULES=yCONFIG_MODULE_FORCE_LOAD=yCONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set CONFIG_MODULE_SIG_HASH="sha256" CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set CONFIG_MODPROBE_PATH="/sbin/modprobe" CONFIG_MODULES_TREE_LOOKUP=yCONFIG_BLOCK=yCONFIG_BLK_SCSI_REQUEST=y CONFIG_BLK_CGROUP_RWSTAT=yCONFIG_BLK_DEV_BSG=yCONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_INTEGRITY_T10=m CONFIG_BLK_DEV_ZONED=y CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_CMDLINE_PARSER is not set CONFIG_BLK_WBT=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set CONFIG_BLK_WBT_MQ=yCONFIG_BLK_DEBUG_FS=yCONFIG_BLK_DEBUG_FS_ZONED=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not setCONFIG_OSF_PARTITION=yCONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not setCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not setCONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not setCONFIG_SUN_PARTITION=yCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLOCK_COMPAT=yCONFIG_BLK_MQ_PCI=yCONFIG_BLK_MQ_VIRTIO=yCONFIG_BLK_MQ_RDMA=yCONFIG_BLK_PM=y
#
# IO Schedulers
#CONFIG_MQ_IOSCHED_DEADLINE=yCONFIG_MQ_IOSCHED_KYBER=yCONFIG_IOSCHED_BFQ=yCONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers
CONFIG_PREEMPT_NOTIFIERS=yCONFIG_PADATA=yCONFIG_ASN1=yCONFIG_INLINE_SPIN_UNLOCK_IRQ=yCONFIG_INLINE_READ_UNLOCK=yCONFIG_INLINE_READ_UNLOCK_IRQ=yCONFIG_INLINE_WRITE_UNLOCK=yCONFIG_INLINE_WRITE_UNLOCK_IRQ=yCONFIG_ARCH_SUPPORTS_ATOMIC_RMW=yCONFIG_MUTEX_SPIN_ON_OWNER=yCONFIG_RWSEM_SPIN_ON_OWNER=yCONFIG_LOCK_SPIN_ON_OWNER=yCONFIG_ARCH_USE_QUEUED_SPINLOCKS=yCONFIG_QUEUED_SPINLOCKS=yCONFIG_ARCH_USE_QUEUED_RWLOCKS=yCONFIG_QUEUED_RWLOCKS=yCONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=yCONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=yCONFIG_ARCH_HAS_SYSCALL_WRAPPER=yCONFIG_FREEZER=y
#
# Executable file formats
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=yCONFIG_ELFCORE=yCONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=yCONFIG_BINFMT_SCRIPT=yCONFIG_BINFMT_MISC=mCONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_HAVE_FAST_GUP=y CONFIG_NUMA_KEEP_MEMINFO=y CONFIG_MEMORY_ISOLATION=y CONFIG_HAVE_BOOTMEM_INFO_NODE=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_MHP_MEMMAP_ON_MEMORY=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y CONFIG_MEMORY_BALLOON=y CONFIG_BALLOON_COMPACTION=y CONFIG_COMPACTION=yCONFIG_PAGE_REPORTING=yCONFIG_MIGRATION=y CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y CONFIG_ARCH_ENABLE_THP_MIGRATION=y CONFIG_CONTIG_ALLOC=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_VIRT_TO_BUS=yCONFIG_MMU_NOTIFIER=yCONFIG_KSM=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y CONFIG_MEMORY_FAILURE=y CONFIG_HWPOISON_INJECT=m CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set CONFIG_ARCH_WANTS_THP_SWAP=y CONFIG_THP_SWAP=yCONFIG_CLEANCACHE=yCONFIG_FRONTSWAP=yCONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
# CONFIG_CMA_SYSFS is not set CONFIG_CMA_AREAS=19CONFIG_ZSWAP=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo" CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set # CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
# CONFIG_ZSWAP_DEFAULT_ON is not set CONFIG_ZPOOL=yCONFIG_ZBUD=y
# CONFIG_Z3FOLD is not setCONFIG_ZSMALLOC=yCONFIG_ZSMALLOC_STAT=y CONFIG_GENERIC_EARLY_IOREMAP=y CONFIG_DEFERRED_STRUCT_PAGE_INIT=y CONFIG_IDLE_PAGE_TRACKING=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_ARCH_HAS_PTE_DEVMAP=y CONFIG_ZONE_DEVICE=y CONFIG_DEV_PAGEMAP_OPS=yCONFIG_HMM_MIRROR=yCONFIG_DEVICE_PRIVATE=yCONFIG_VMAP_PFN=y CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
# CONFIG_READ_ONLY_THP_FOR_FS is not set CONFIG_ARCH_HAS_PTE_SPECIAL=y CONFIG_IO_MAPPING=y
# end of Memory Management options
CONFIG_NET=yCONFIG_COMPAT_NETLINK_MESSAGES=yCONFIG_NET_INGRESS=yCONFIG_NET_EGRESS=yCONFIG_SKB_EXTENSIONS=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_DIAG=mCONFIG_UNIX=yCONFIG_UNIX_SCM=yCONFIG_UNIX_DIAG=mCONFIG_TLS=mCONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not setCONFIG_XFRM=yCONFIG_XFRM_OFFLOAD=yCONFIG_XFRM_ALGO=yCONFIG_XFRM_USER=y
# CONFIG_XFRM_USER_COMPAT is not set
# CONFIG_XFRM_INTERFACE is not setCONFIG_XFRM_SUB_POLICY=yCONFIG_XFRM_MIGRATE=yCONFIG_XFRM_STATISTICS=yCONFIG_XFRM_AH=mCONFIG_XFRM_ESP=mCONFIG_XFRM_IPCOMP=mCONFIG_NET_KEY=mCONFIG_NET_KEY_MIGRATE=y
# CONFIG_SMC is not setCONFIG_XDP_SOCKETS=y
# CONFIG_XDP_SOCKETS_DIAG is not setCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_IP_FIB_TRIE_STATS=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_VERBOSE=yCONFIG_IP_ROUTE_CLASSID=yCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not setCONFIG_NET_IPIP=mCONFIG_NET_IPGRE_DEMUX=mCONFIG_NET_IP_TUNNEL=mCONFIG_NET_IPGRE=mCONFIG_NET_IPGRE_BROADCAST=yCONFIG_IP_MROUTE_COMMON=yCONFIG_IP_MROUTE=yCONFIG_IP_MROUTE_MULTIPLE_TABLES=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=yCONFIG_SYN_COOKIES=yCONFIG_NET_IPVTI=mCONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not setCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_ESP_OFFLOAD=m
# CONFIG_INET_ESPINTCP is not setCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=mCONFIG_INET_DIAG=mCONFIG_INET_TCP_DIAG=mCONFIG_INET_UDP_DIAG=mCONFIG_INET_RAW_DIAG=m
# CONFIG_INET_DIAG_DESTROY is not setCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=mCONFIG_TCP_CONG_CUBIC=yCONFIG_TCP_CONG_WESTWOOD=mCONFIG_TCP_CONG_HTCP=mCONFIG_TCP_CONG_HSTCP=mCONFIG_TCP_CONG_HYBLA=mCONFIG_TCP_CONG_VEGAS=mCONFIG_TCP_CONG_NV=mCONFIG_TCP_CONG_SCALABLE=mCONFIG_TCP_CONG_LP=mCONFIG_TCP_CONG_VENO=mCONFIG_TCP_CONG_YEAH=mCONFIG_TCP_CONG_ILLINOIS=mCONFIG_TCP_CONG_DCTCP=m
# CONFIG_TCP_CONG_CDG is not setCONFIG_TCP_CONG_BBR=mCONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="cubic"CONFIG_TCP_MD5SIG=yCONFIG_IPV6=yCONFIG_IPV6_ROUTER_PREF=yCONFIG_IPV6_ROUTE_INFO=yCONFIG_IPV6_OPTIMISTIC_DAD=yCONFIG_INET6_AH=mCONFIG_INET6_ESP=mCONFIG_INET6_ESP_OFFLOAD=m
# CONFIG_INET6_ESPINTCP is not setCONFIG_INET6_IPCOMP=mCONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not setCONFIG_INET6_XFRM_TUNNEL=mCONFIG_INET6_TUNNEL=mCONFIG_IPV6_VTI=mCONFIG_IPV6_SIT=mCONFIG_IPV6_SIT_6RD=yCONFIG_IPV6_NDISC_NODETYPE=yCONFIG_IPV6_TUNNEL=mCONFIG_IPV6_GRE=mCONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not setCONFIG_IPV6_MROUTE=yCONFIG_IPV6_MROUTE_MULTIPLE_TABLES=yCONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not setCONFIG_NETLABEL=y
# CONFIG_MPTCP is not setCONFIG_NETWORK_SECMARK=yCONFIG_NET_PTP_CLASSIFY=yCONFIG_NETWORK_PHY_TIMESTAMPING=yCONFIG_NETFILTER=yCONFIG_NETFILTER_ADVANCED=yCONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_INGRESS=yCONFIG_NETFILTER_NETLINK=mCONFIG_NETFILTER_FAMILY_BRIDGE=yCONFIG_NETFILTER_FAMILY_ARP=y
# CONFIG_NETFILTER_NETLINK_ACCT is not setCONFIG_NETFILTER_NETLINK_QUEUE=mCONFIG_NETFILTER_NETLINK_LOG=mCONFIG_NETFILTER_NETLINK_OSF=mCONFIG_NF_CONNTRACK=mCONFIG_NF_LOG_SYSLOG=mCONFIG_NETFILTER_CONNCOUNT=mCONFIG_NF_CONNTRACK_MARK=yCONFIG_NF_CONNTRACK_SECMARK=yCONFIG_NF_CONNTRACK_ZONES=yCONFIG_NF_CONNTRACK_PROCFS=yCONFIG_NF_CONNTRACK_EVENTS=yCONFIG_NF_CONNTRACK_TIMEOUT=yCONFIG_NF_CONNTRACK_TIMESTAMP=yCONFIG_NF_CONNTRACK_LABELS=yCONFIG_NF_CT_PROTO_DCCP=yCONFIG_NF_CT_PROTO_GRE=yCONFIG_NF_CT_PROTO_SCTP=yCONFIG_NF_CT_PROTO_UDPLITE=yCONFIG_NF_CONNTRACK_AMANDA=mCONFIG_NF_CONNTRACK_FTP=mCONFIG_NF_CONNTRACK_H323=mCONFIG_NF_CONNTRACK_IRC=mCONFIG_NF_CONNTRACK_BROADCAST=mCONFIG_NF_CONNTRACK_NETBIOS_NS=mCONFIG_NF_CONNTRACK_SNMP=mCONFIG_NF_CONNTRACK_PPTP=mCONFIG_NF_CONNTRACK_SANE=mCONFIG_NF_CONNTRACK_SIP=mCONFIG_NF_CONNTRACK_TFTP=mCONFIG_NF_CT_NETLINK=mCONFIG_NF_CT_NETLINK_TIMEOUT=mCONFIG_NF_CT_NETLINK_HELPER=mCONFIG_NETFILTER_NETLINK_GLUE_CT=yCONFIG_NF_NAT=mCONFIG_NF_NAT_AMANDA=mCONFIG_NF_NAT_FTP=mCONFIG_NF_NAT_IRC=mCONFIG_NF_NAT_SIP=mCONFIG_NF_NAT_TFTP=mCONFIG_NF_NAT_REDIRECT=yCONFIG_NF_NAT_MASQUERADE=yCONFIG_NETFILTER_SYNPROXY=mCONFIG_NF_TABLES=mCONFIG_NF_TABLES_INET=yCONFIG_NF_TABLES_NETDEV=yCONFIG_NFT_NUMGEN=mCONFIG_NFT_CT=mCONFIG_NFT_COUNTER=mCONFIG_NFT_CONNLIMIT=mCONFIG_NFT_LOG=mCONFIG_NFT_LIMIT=mCONFIG_NFT_MASQ=mCONFIG_NFT_REDIR=mCONFIG_NFT_NAT=m
# CONFIG_NFT_TUNNEL is not setCONFIG_NFT_OBJREF=mCONFIG_NFT_QUEUE=mCONFIG_NFT_QUOTA=mCONFIG_NFT_REJECT=mCONFIG_NFT_REJECT_INET=mCONFIG_NFT_COMPAT=mCONFIG_NFT_HASH=mCONFIG_NFT_FIB=mCONFIG_NFT_FIB_INET=m
# CONFIG_NFT_XFRM is not setCONFIG_NFT_SOCKET=m
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
# CONFIG_NFT_SYNPROXY is not setCONFIG_NF_DUP_NETDEV=mCONFIG_NFT_DUP_NETDEV=mCONFIG_NFT_FWD_NETDEV=mCONFIG_NFT_FIB_NETDEV=m
# CONFIG_NFT_REJECT_NETDEV is not set
# CONFIG_NF_FLOW_TABLE is not setCONFIG_NETFILTER_XTABLES=yCONFIG_NETFILTER_XTABLES_COMPAT=y
#
# Xtables combined modules
#CONFIG_NETFILTER_XT_MARK=mCONFIG_NETFILTER_XT_CONNMARK=mCONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#CONFIG_NETFILTER_XT_TARGET_AUDIT=mCONFIG_NETFILTER_XT_TARGET_CHECKSUM=mCONFIG_NETFILTER_XT_TARGET_CLASSIFY=mCONFIG_NETFILTER_XT_TARGET_CONNMARK=mCONFIG_NETFILTER_XT_TARGET_CONNSECMARK=mCONFIG_NETFILTER_XT_TARGET_CT=mCONFIG_NETFILTER_XT_TARGET_DSCP=mCONFIG_NETFILTER_XT_TARGET_HL=mCONFIG_NETFILTER_XT_TARGET_HMARK=mCONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
# CONFIG_NETFILTER_XT_TARGET_LED is not setCONFIG_NETFILTER_XT_TARGET_LOG=mCONFIG_NETFILTER_XT_TARGET_MARK=mCONFIG_NETFILTER_XT_NAT=mCONFIG_NETFILTER_XT_TARGET_NETMAP=mCONFIG_NETFILTER_XT_TARGET_NFLOG=mCONFIG_NETFILTER_XT_TARGET_NFQUEUE=mCONFIG_NETFILTER_XT_TARGET_NOTRACK=mCONFIG_NETFILTER_XT_TARGET_RATEEST=mCONFIG_NETFILTER_XT_TARGET_REDIRECT=mCONFIG_NETFILTER_XT_TARGET_MASQUERADE=mCONFIG_NETFILTER_XT_TARGET_TEE=mCONFIG_NETFILTER_XT_TARGET_TPROXY=mCONFIG_NETFILTER_XT_TARGET_TRACE=mCONFIG_NETFILTER_XT_TARGET_SECMARK=mCONFIG_NETFILTER_XT_TARGET_TCPMSS=mCONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=mCONFIG_NETFILTER_XT_MATCH_BPF=mCONFIG_NETFILTER_XT_MATCH_CGROUP=mCONFIG_NETFILTER_XT_MATCH_CLUSTER=mCONFIG_NETFILTER_XT_MATCH_COMMENT=mCONFIG_NETFILTER_XT_MATCH_CONNBYTES=mCONFIG_NETFILTER_XT_MATCH_CONNLABEL=mCONFIG_NETFILTER_XT_MATCH_CONNLIMIT=mCONFIG_NETFILTER_XT_MATCH_CONNMARK=mCONFIG_NETFILTER_XT_MATCH_CONNTRACK=mCONFIG_NETFILTER_XT_MATCH_CPU=mCONFIG_NETFILTER_XT_MATCH_DCCP=mCONFIG_NETFILTER_XT_MATCH_DEVGROUP=mCONFIG_NETFILTER_XT_MATCH_DSCP=mCONFIG_NETFILTER_XT_MATCH_ECN=mCONFIG_NETFILTER_XT_MATCH_ESP=mCONFIG_NETFILTER_XT_MATCH_HASHLIMIT=mCONFIG_NETFILTER_XT_MATCH_HELPER=mCONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not setCONFIG_NETFILTER_XT_MATCH_IPRANGE=mCONFIG_NETFILTER_XT_MATCH_IPVS=m
# CONFIG_NETFILTER_XT_MATCH_L2TP is not setCONFIG_NETFILTER_XT_MATCH_LENGTH=mCONFIG_NETFILTER_XT_MATCH_LIMIT=mCONFIG_NETFILTER_XT_MATCH_MAC=mCONFIG_NETFILTER_XT_MATCH_MARK=mCONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not setCONFIG_NETFILTER_XT_MATCH_OSF=mCONFIG_NETFILTER_XT_MATCH_OWNER=mCONFIG_NETFILTER_XT_MATCH_POLICY=mCONFIG_NETFILTER_XT_MATCH_PHYSDEV=mCONFIG_NETFILTER_XT_MATCH_PKTTYPE=mCONFIG_NETFILTER_XT_MATCH_QUOTA=mCONFIG_NETFILTER_XT_MATCH_RATEEST=mCONFIG_NETFILTER_XT_MATCH_REALM=mCONFIG_NETFILTER_XT_MATCH_RECENT=mCONFIG_NETFILTER_XT_MATCH_SCTP=mCONFIG_NETFILTER_XT_MATCH_SOCKET=mCONFIG_NETFILTER_XT_MATCH_STATE=mCONFIG_NETFILTER_XT_MATCH_STATISTIC=mCONFIG_NETFILTER_XT_MATCH_STRING=mCONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration
CONFIG_IP_SET=mCONFIG_IP_SET_MAX=256CONFIG_IP_SET_BITMAP_IP=mCONFIG_IP_SET_BITMAP_IPMAC=mCONFIG_IP_SET_BITMAP_PORT=mCONFIG_IP_SET_HASH_IP=mCONFIG_IP_SET_HASH_IPMARK=mCONFIG_IP_SET_HASH_IPPORT=mCONFIG_IP_SET_HASH_IPPORTIP=mCONFIG_IP_SET_HASH_IPPORTNET=mCONFIG_IP_SET_HASH_IPMAC=mCONFIG_IP_SET_HASH_MAC=mCONFIG_IP_SET_HASH_NETPORTNET=mCONFIG_IP_SET_HASH_NET=mCONFIG_IP_SET_HASH_NETNET=mCONFIG_IP_SET_HASH_NETPORT=mCONFIG_IP_SET_HASH_NETIFACE=mCONFIG_IP_SET_LIST_SET=mCONFIG_IP_VS=mCONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not setCONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=yCONFIG_IP_VS_PROTO_AH_ESP=yCONFIG_IP_VS_PROTO_ESP=yCONFIG_IP_VS_PROTO_AH=yCONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#CONFIG_IP_VS_RR=mCONFIG_IP_VS_WRR=mCONFIG_IP_VS_LC=mCONFIG_IP_VS_WLC=mCONFIG_IP_VS_FO=mCONFIG_IP_VS_OVF=mCONFIG_IP_VS_LBLC=mCONFIG_IP_VS_LBLCR=mCONFIG_IP_VS_DH=mCONFIG_IP_VS_SH=m
# CONFIG_IP_VS_MH is not setCONFIG_IP_VS_SED=mCONFIG_IP_VS_NQ=m
# CONFIG_IP_VS_TWOS is not set
#
# IPVS SH scheduler
#CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS MH scheduler
#CONFIG_IP_VS_MH_TAB_INDEX=12
#
# IPVS application helper
#CONFIG_IP_VS_FTP=mCONFIG_IP_VS_NFCT=yCONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV4=mCONFIG_NF_SOCKET_IPV4=mCONFIG_NF_TPROXY_IPV4=mCONFIG_NF_TABLES_IPV4=yCONFIG_NFT_REJECT_IPV4=mCONFIG_NFT_DUP_IPV4=mCONFIG_NFT_FIB_IPV4=mCONFIG_NF_TABLES_ARP=yCONFIG_NF_DUP_IPV4=mCONFIG_NF_LOG_ARP=mCONFIG_NF_LOG_IPV4=mCONFIG_NF_REJECT_IPV4=mCONFIG_NF_NAT_SNMP_BASIC=mCONFIG_NF_NAT_PPTP=mCONFIG_NF_NAT_H323=mCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_AH=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_RPFILTER=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_SYNPROXY=mCONFIG_IP_NF_NAT=mCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_NETMAP=mCONFIG_IP_NF_TARGET_REDIRECT=mCONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not setCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_TTL=mCONFIG_IP_NF_RAW=mCONFIG_IP_NF_SECURITY=mCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#CONFIG_NF_SOCKET_IPV6=mCONFIG_NF_TPROXY_IPV6=mCONFIG_NF_TABLES_IPV6=yCONFIG_NFT_REJECT_IPV6=mCONFIG_NFT_DUP_IPV6=mCONFIG_NFT_FIB_IPV6=mCONFIG_NF_DUP_IPV6=mCONFIG_NF_REJECT_IPV6=mCONFIG_NF_LOG_IPV6=mCONFIG_IP6_NF_IPTABLES=mCONFIG_IP6_NF_MATCH_AH=mCONFIG_IP6_NF_MATCH_EUI64=mCONFIG_IP6_NF_MATCH_FRAG=mCONFIG_IP6_NF_MATCH_OPTS=mCONFIG_IP6_NF_MATCH_HL=mCONFIG_IP6_NF_MATCH_IPV6HEADER=mCONFIG_IP6_NF_MATCH_MH=mCONFIG_IP6_NF_MATCH_RPFILTER=mCONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not set
# CONFIG_IP6_NF_TARGET_HL is not setCONFIG_IP6_NF_FILTER=mCONFIG_IP6_NF_TARGET_REJECT=mCONFIG_IP6_NF_TARGET_SYNPROXY=mCONFIG_IP6_NF_MANGLE=mCONFIG_IP6_NF_RAW=mCONFIG_IP6_NF_SECURITY=mCONFIG_IP6_NF_NAT=mCONFIG_IP6_NF_TARGET_MASQUERADE=mCONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=m CONFIG_NF_TABLES_BRIDGE=m
# CONFIG_NFT_BRIDGE_META is not set CONFIG_NFT_BRIDGE_REJECT=m
# CONFIG_NF_CONNTRACK_BRIDGE is not set CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m CONFIG_BRIDGE_EBT_T_NAT=m CONFIG_BRIDGE_EBT_802_3=m CONFIG_BRIDGE_EBT_AMONG=m CONFIG_BRIDGE_EBT_ARP=m CONFIG_BRIDGE_EBT_IP=m CONFIG_BRIDGE_EBT_IP6=m CONFIG_BRIDGE_EBT_LIMIT=m CONFIG_BRIDGE_EBT_MARK=m CONFIG_BRIDGE_EBT_PKTTYPE=m CONFIG_BRIDGE_EBT_STP=m CONFIG_BRIDGE_EBT_VLAN=m CONFIG_BRIDGE_EBT_ARPREPLY=m CONFIG_BRIDGE_EBT_DNAT=m CONFIG_BRIDGE_EBT_MARK_T=m CONFIG_BRIDGE_EBT_REDIRECT=m CONFIG_BRIDGE_EBT_SNAT=m CONFIG_BRIDGE_EBT_LOG=m CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not setCONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set CONFIG_SCTP_COOKIE_HMAC_MD5=y CONFIG_SCTP_COOKIE_HMAC_SHA1=y CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not setCONFIG_TIPC=m
# CONFIG_TIPC_MEDIA_IB is not set CONFIG_TIPC_MEDIA_UDP=yCONFIG_TIPC_CRYPTO=yCONFIG_TIPC_DIAG=mCONFIG_ATM=mCONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_L2TP=mCONFIG_L2TP_DEBUGFS=mCONFIG_L2TP_V3=yCONFIG_L2TP_IP=mCONFIG_L2TP_ETH=mCONFIG_STP=mCONFIG_GARP=mCONFIG_MRP=mCONFIG_BRIDGE=m CONFIG_BRIDGE_IGMP_SNOOPING=y CONFIG_BRIDGE_VLAN_FILTERING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=mCONFIG_VLAN_8021Q_GVRP=y CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not setCONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not setCONFIG_6LOWPAN=m
# CONFIG_6LOWPAN_DEBUGFS is not set
# CONFIG_6LOWPAN_NHC is not set CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set CONFIG_IEEE802154_SOCKET=m CONFIG_IEEE802154_6LOWPAN=m CONFIG_MAC802154=mCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_HFSC=mCONFIG_NET_SCH_ATM=mCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_MULTIQ=mCONFIG_NET_SCH_RED=mCONFIG_NET_SCH_SFB=mCONFIG_NET_SCH_SFQ=mCONFIG_NET_SCH_TEQL=mCONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not setCONFIG_NET_SCH_GRED=mCONFIG_NET_SCH_DSMARK=mCONFIG_NET_SCH_NETEM=mCONFIG_NET_SCH_DRR=mCONFIG_NET_SCH_MQPRIO=m
# CONFIG_NET_SCH_SKBPRIO is not setCONFIG_NET_SCH_CHOKE=mCONFIG_NET_SCH_QFQ=mCONFIG_NET_SCH_CODEL=mCONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not setCONFIG_NET_SCH_FQ=mCONFIG_NET_SCH_HHF=mCONFIG_NET_SCH_PIE=m
# CONFIG_NET_SCH_FQ_PIE is not setCONFIG_NET_SCH_INGRESS=mCONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_ETS is not setCONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not setCONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_SFQ is not set
# CONFIG_DEFAULT_PFIFO_FAST is not setCONFIG_DEFAULT_NET_SCH="fq_codel"
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=mCONFIG_NET_CLS_TCINDEX=mCONFIG_NET_CLS_ROUTE4=mCONFIG_NET_CLS_FW=mCONFIG_NET_CLS_U32=mCONFIG_CLS_U32_PERF=yCONFIG_CLS_U32_MARK=yCONFIG_NET_CLS_RSVP=mCONFIG_NET_CLS_RSVP6=mCONFIG_NET_CLS_FLOW=mCONFIG_NET_CLS_CGROUP=yCONFIG_NET_CLS_BPF=mCONFIG_NET_CLS_FLOWER=mCONFIG_NET_CLS_MATCHALL=mCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=mCONFIG_NET_EMATCH_NBYTE=mCONFIG_NET_EMATCH_U32=mCONFIG_NET_EMATCH_META=mCONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_EMATCH_CANID is not setCONFIG_NET_EMATCH_IPSET=m
# CONFIG_NET_EMATCH_IPT is not setCONFIG_NET_CLS_ACT=yCONFIG_NET_ACT_POLICE=mCONFIG_NET_ACT_GACT=mCONFIG_GACT_PROB=yCONFIG_NET_ACT_MIRRED=mCONFIG_NET_ACT_SAMPLE=m
# CONFIG_NET_ACT_IPT is not setCONFIG_NET_ACT_NAT=mCONFIG_NET_ACT_PEDIT=mCONFIG_NET_ACT_SIMP=mCONFIG_NET_ACT_SKBEDIT=mCONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_MPLS is not setCONFIG_NET_ACT_VLAN=mCONFIG_NET_ACT_BPF=m
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_CTINFO is not setCONFIG_NET_ACT_SKBMOD=m
# CONFIG_NET_ACT_IFE is not setCONFIG_NET_ACT_TUNNEL_KEY=m
# CONFIG_NET_ACT_GATE is not set
# CONFIG_NET_TC_SKB_EXT is not setCONFIG_NET_SCH_FIFO=yCONFIG_DCB=yCONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not setCONFIG_OPENVSWITCH=mCONFIG_OPENVSWITCH_GRE=mCONFIG_VSOCKETS=mCONFIG_VSOCKETS_DIAG=mCONFIG_VSOCKETS_LOOPBACK=mCONFIG_VMWARE_VMCI_VSOCKETS=mCONFIG_VIRTIO_VSOCKETS=mCONFIG_VIRTIO_VSOCKETS_COMMON=mCONFIG_HYPERV_VSOCKETS=mCONFIG_NETLINK_DIAG=mCONFIG_MPLS=yCONFIG_NET_MPLS_GSO=yCONFIG_MPLS_ROUTING=mCONFIG_MPLS_IPTUNNEL=mCONFIG_NET_NSH=y
# CONFIG_HSR is not setCONFIG_NET_SWITCHDEV=yCONFIG_NET_L3_MASTER_DEV=y
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not setCONFIG_PCPU_DEV_REFCNT=yCONFIG_RPS=yCONFIG_RFS_ACCEL=yCONFIG_SOCK_RX_QUEUE_MAPPING=yCONFIG_XPS=yCONFIG_CGROUP_NET_PRIO=yCONFIG_CGROUP_NET_CLASSID=yCONFIG_NET_RX_BUSY_POLL=yCONFIG_BQL=yCONFIG_BPF_JIT=yCONFIG_BPF_STREAM_PARSER=yCONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#CONFIG_NET_PKTGEN=mCONFIG_NET_DROP_MONITOR=y
# end of Network testing # end of Networking options
# CONFIG_HAMRADIO is not setCONFIG_CAN=mCONFIG_CAN_RAW=mCONFIG_CAN_BCM=mCONFIG_CAN_GW=m
# CONFIG_CAN_J1939 is not set
# CONFIG_CAN_ISOTP is not set
#
# CAN Device Drivers
#CONFIG_CAN_VCAN=m
# CONFIG_CAN_VXCAN is not setCONFIG_CAN_SLCAN=mCONFIG_CAN_DEV=mCONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_KVASER_PCIEFD is not setCONFIG_CAN_C_CAN=mCONFIG_CAN_C_CAN_PLATFORM=mCONFIG_CAN_C_CAN_PCI=mCONFIG_CAN_CC770=m
# CONFIG_CAN_CC770_ISA is not setCONFIG_CAN_CC770_PLATFORM=m
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_PEAK_PCIEFD is not setCONFIG_CAN_SJA1000=mCONFIG_CAN_EMS_PCI=m
# CONFIG_CAN_F81601 is not setCONFIG_CAN_KVASER_PCI=mCONFIG_CAN_PEAK_PCI=mCONFIG_CAN_PEAK_PCIEC=yCONFIG_CAN_PLX_PCI=m
# CONFIG_CAN_SJA1000_ISA is not setCONFIG_CAN_SJA1000_PLATFORM=mCONFIG_CAN_SOFTING=m
#
# CAN SPI interfaces
#
# CONFIG_CAN_HI311X is not set
# CONFIG_CAN_MCP251X is not set
# CONFIG_CAN_MCP251XFD is not set
# end of CAN SPI interfaces
#
# CAN USB interfaces
#
# CONFIG_CAN_8DEV_USB is not set
# CONFIG_CAN_EMS_USB is not set
# CONFIG_CAN_ESD_USB2 is not set
# CONFIG_CAN_ETAS_ES58X is not set
# CONFIG_CAN_GS_USB is not set
# CONFIG_CAN_KVASER_USB is not set
# CONFIG_CAN_MCBA_USB is not set
# CONFIG_CAN_PEAK_USB is not set
# CONFIG_CAN_UCAN is not set
# end of CAN USB interfaces
# CONFIG_CAN_DEBUG_DEVICES is not set
# end of CAN Device Drivers
CONFIG_BT=mCONFIG_BT_BREDR=yCONFIG_BT_RFCOMM=mCONFIG_BT_RFCOMM_TTY=yCONFIG_BT_BNEP=mCONFIG_BT_BNEP_MC_FILTER=yCONFIG_BT_BNEP_PROTO_FILTER=yCONFIG_BT_HIDP=mCONFIG_BT_HS=yCONFIG_BT_LE=y
# CONFIG_BT_6LOWPAN is not set
# CONFIG_BT_LEDS is not set
# CONFIG_BT_MSFTEXT is not set
# CONFIG_BT_AOSPEXT is not setCONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not setCONFIG_BT_HCIUART=mCONFIG_BT_HCIUART_H4=yCONFIG_BT_HCIUART_BCSP=yCONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_INTEL is not set
# CONFIG_BT_HCIUART_AG6XX is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not setCONFIG_BT_HCIVHCI=mCONFIG_BT_MRVL=m
# CONFIG_BT_MRVL_SDIO is not set
# CONFIG_BT_MTKSDIO is not set
# CONFIG_BT_VIRTIO is not set
# end of Bluetooth device drivers
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not setCONFIG_STREAM_PARSER=yCONFIG_FIB_RULES=yCONFIG_WIRELESS=yCONFIG_WEXT_CORE=yCONFIG_WEXT_PROC=yCONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not setCONFIG_CFG80211_REQUIRE_SIGNED_REGDB=yCONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=yCONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not setCONFIG_CFG80211_CRDA_SUPPORT=yCONFIG_CFG80211_WEXT=yCONFIG_MAC80211=mCONFIG_MAC80211_HAS_RC=yCONFIG_MAC80211_RC_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT="minstrel_ht"CONFIG_MAC80211_MESH=yCONFIG_MAC80211_LEDS=yCONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not setCONFIG_MAC80211_STA_HASH_MAX_SIZE=0CONFIG_RFKILL=mCONFIG_RFKILL_LEDS=yCONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not setCONFIG_NET_9P=yCONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_XEN is not set
# CONFIG_NET_9P_RDMA is not set
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not setCONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not setCONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
# CONFIG_NFC is not setCONFIG_PSAMPLE=m
# CONFIG_NET_IFE is not setCONFIG_LWTUNNEL=yCONFIG_LWTUNNEL_BPF=yCONFIG_DST_CACHE=yCONFIG_GRO_CELLS=yCONFIG_SOCK_VALIDATE_XMIT=yCONFIG_NET_SELFTESTS=yCONFIG_NET_SOCK_MSG=yCONFIG_NET_DEVLINK=yCONFIG_PAGE_POOL=yCONFIG_FAILOVER=mCONFIG_ETHTOOL_NETLINK=yCONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#CONFIG_HAVE_EISA=y
# CONFIG_EISA is not setCONFIG_HAVE_PCI=yCONFIG_PCI=yCONFIG_PCI_DOMAINS=yCONFIG_PCIEPORTBUS=yCONFIG_HOTPLUG_PCI_PCIE=yCONFIG_PCIEAER=yCONFIG_PCIEAER_INJECT=mCONFIG_PCIE_ECRC=yCONFIG_PCIEASPM=yCONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not setCONFIG_PCIE_PME=yCONFIG_PCIE_DPC=y
# CONFIG_PCIE_PTM is not set
# CONFIG_PCIE_EDR is not setCONFIG_PCI_MSI=yCONFIG_PCI_MSI_IRQ_DOMAIN=yCONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not setCONFIG_PCI_STUB=yCONFIG_PCI_PF_STUB=m
# CONFIG_XEN_PCIDEV_FRONTEND is not setCONFIG_PCI_ATS=yCONFIG_PCI_LOCKLESS_CONFIG=yCONFIG_PCI_IOV=yCONFIG_PCI_PRI=yCONFIG_PCI_PASID=y
# CONFIG_PCI_P2PDMA is not setCONFIG_PCI_LABEL=yCONFIG_PCI_HYPERV=mCONFIG_HOTPLUG_PCI=yCONFIG_HOTPLUG_PCI_ACPI=yCONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not setCONFIG_HOTPLUG_PCI_SHPC=y
#
# PCI controller drivers
#CONFIG_VMD=yCONFIG_PCI_HYPERV_INTERFACE=m
#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support # end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not setCONFIG_DEVTMPFS=yCONFIG_DEVTMPFS_MOUNT=yCONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#CONFIG_FW_LOADER=y CONFIG_FW_LOADER_PAGED_BUF=y CONFIG_EXTRA_FIRMWARE="" CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set # CONFIG_FW_LOADER_COMPRESS is not set CONFIG_FW_CACHE=y
# end of Firmware loader
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_PM_QOS_KUNIT_TEST is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
# CONFIG_DRIVER_PE_KUNIT_TEST is not setCONFIG_SYS_HYPERVISOR=yCONFIG_GENERIC_CPU_AUTOPROBE=yCONFIG_GENERIC_CPU_VULNERABILITIES=yCONFIG_REGMAP=yCONFIG_REGMAP_I2C=mCONFIG_REGMAP_SPI=mCONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# end of Bus devices
CONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=y
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not setCONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=yCONFIG_PARPORT=mCONFIG_PARPORT_PC=mCONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AX88796 is not setCONFIG_PARPORT_1284=yCONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_NULL_BLK=mCONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION=y
# CONFIG_BLK_DEV_FD is not setCONFIG_CDROM=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not setCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not setCONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not setCONFIG_BLK_DEV_RAM=mCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=16384CONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not setCONFIG_XEN_BLKDEV_FRONTEND=mCONFIG_VIRTIO_BLK=mCONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_RSXX is not set
#
# NVME Support
#CONFIG_NVME_CORE=mCONFIG_BLK_DEV_NVME=mCONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_HWMON is not setCONFIG_NVME_FABRICS=m
# CONFIG_NVME_RDMA is not setCONFIG_NVME_FC=m
# CONFIG_NVME_TCP is not setCONFIG_NVME_TARGET=m
# CONFIG_NVME_TARGET_PASSTHRU is not setCONFIG_NVME_TARGET_LOOP=m
# CONFIG_NVME_TARGET_RDMA is not setCONFIG_NVME_TARGET_FC=mCONFIG_NVME_TARGET_FCLOOP=m
# CONFIG_NVME_TARGET_TCP is not set
# end of NVME Support
#
# Misc devices
#CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not setCONFIG_TIFM_CORE=mCONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not setCONFIG_ENCLOSURE_SERVICES=mCONFIG_SGI_XP=mCONFIG_HP_ILO=mCONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not setCONFIG_APDS9802ALS=mCONFIG_ISL29003=mCONFIG_ISL29020=mCONFIG_SENSORS_TSL2550=mCONFIG_SENSORS_BH1770=mCONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not setCONFIG_VMWARE_BALLOON=m
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not setCONFIG_MISC_RTSX=m
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not setCONFIG_EEPROM_LEGACY=mCONFIG_EEPROM_MAX6875=mCONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not setCONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline #
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=mCONFIG_ALTERA_STAPL=mCONFIG_INTEL_MEI=mCONFIG_INTEL_MEI_ME=m
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_INTEL_MEI_HDCP is not setCONFIG_VMWARE_VMCI=m
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not setCONFIG_MISC_RTSX_PCI=m
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
# CONFIG_UACCE is not setCONFIG_PVPANIC=y
# CONFIG_PVPANIC_MMIO is not set
# CONFIG_PVPANIC_PCI is not set
# end of Misc devices
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#CONFIG_SCSI_MOD=yCONFIG_RAID_ATTRS=mCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=mCONFIG_CHR_DEV_ST=mCONFIG_BLK_DEV_SR=mCONFIG_CHR_DEV_SG=mCONFIG_CHR_DEV_SCH=mCONFIG_SCSI_ENCLOSURE=mCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=yCONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=mCONFIG_SCSI_FC_ATTRS=mCONFIG_SCSI_ISCSI_ATTRS=mCONFIG_SCSI_SAS_ATTRS=mCONFIG_SCSI_SAS_LIBSAS=mCONFIG_SCSI_SAS_ATA=yCONFIG_SCSI_SAS_HOST_SMP=yCONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not setCONFIG_SCSI_MPT3SAS=mCONFIG_SCSI_MPT2SAS_MAX_SGE=128CONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_XEN_SCSI_FRONTEND is not setCONFIG_HYPERV_STORAGE=m
# CONFIG_LIBFC is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not setCONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not setCONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_CHELSIO_FCOE is not setCONFIG_SCSI_DH=yCONFIG_SCSI_DH_RDAC=yCONFIG_SCSI_DH_HP_SW=yCONFIG_SCSI_DH_EMC=yCONFIG_SCSI_DH_ALUA=y
# end of SCSI device support
CONFIG_ATA=mCONFIG_SATA_HOST=yCONFIG_PATA_TIMINGS=yCONFIG_ATA_VERBOSE_ERROR=yCONFIG_ATA_FORCE=yCONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not setCONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#CONFIG_SATA_AHCI=mCONFIG_SATA_MOBILE_LPM_POLICY=0CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not setCONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not setCONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set CONFIG_MD=yCONFIG_BLK_DEV_MD=yCONFIG_MD_AUTODETECT=yCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=mCONFIG_MD_RAID10=mCONFIG_MD_RAID456=mCONFIG_MD_MULTIPATH=mCONFIG_MD_FAULTY=mCONFIG_MD_CLUSTER=m
# CONFIG_BCACHE is not set CONFIG_BLK_DEV_DM_BUILTIN=y CONFIG_BLK_DEV_DM=mCONFIG_DM_DEBUG=yCONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set CONFIG_DM_BIO_PRISON=m CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set CONFIG_DM_CRYPT=mCONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=mCONFIG_DM_CACHE_SMQ=m CONFIG_DM_WRITECACHE=m
# CONFIG_DM_EBS is not setCONFIG_DM_ERA=m
# CONFIG_DM_CLONE is not set CONFIG_DM_MIRROR=m CONFIG_DM_LOG_USERSPACE=mCONFIG_DM_RAID=mCONFIG_DM_ZERO=mCONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_QL=m CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_MULTIPATH_HST is not set
# CONFIG_DM_MULTIPATH_IOA is not set CONFIG_DM_DELAY=m
# CONFIG_DM_DUST is not set CONFIG_DM_UEVENT=yCONFIG_DM_FLAKEY=mCONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set # CONFIG_DM_VERITY_FEC is not set CONFIG_DM_SWITCH=mCONFIG_DM_LOG_WRITES=m CONFIG_DM_INTEGRITY=m
# CONFIG_DM_ZONED is not set CONFIG_TARGET_CORE=mCONFIG_TCM_IBLOCK=mCONFIG_TCM_FILEIO=mCONFIG_TCM_PSCSI=mCONFIG_TCM_USER2=m CONFIG_LOOPBACK_TARGET=m CONFIG_ISCSI_TARGET=m
# CONFIG_SBP_TARGET is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#CONFIG_FIREWIRE=mCONFIG_FIREWIRE_OHCI=mCONFIG_FIREWIRE_SBP2=mCONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
CONFIG_MACINTOSH_DRIVERS=yCONFIG_MAC_EMUMOUSEBTN=yCONFIG_NETDEVICES=yCONFIG_MII=yCONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not setCONFIG_NETCONSOLE=mCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NET_POLL_CONTROLLER=yCONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not setCONFIG_VETH=mCONFIG_VIRTIO_NET=m
# CONFIG_NLMON is not set
# CONFIG_NET_VRF is not set
# CONFIG_VSOCKMON is not set
# CONFIG_ARCNET is not setCONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not setCONFIG_ETHERNET=yCONFIG_MDIO=yCONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not setCONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not setCONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not setCONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not setCONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not setCONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not setCONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD_XGBE is not setCONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not setCONFIG_NET_VENDOR_ARC=yCONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not setCONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not setCONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not setCONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not setCONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not setCONFIG_CAVIUM_PTP=y
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not setCONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not setCONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not setCONFIG_NET_VENDOR_CORTINA=y
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not setCONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not setCONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not setCONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not setCONFIG_NET_VENDOR_EZCHIP=yCONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not setCONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not setCONFIG_NET_VENDOR_I825XX=yCONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not setCONFIG_E1000=yCONFIG_E1000E=yCONFIG_E1000E_HWTS=yCONFIG_IGB=yCONFIG_IGB_HWMON=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not setCONFIG_IXGBE=yCONFIG_IXGBE_HWMON=y
# CONFIG_IXGBE_DCB is not setCONFIG_IXGBE_IPSEC=y
# CONFIG_IXGBEVF is not setCONFIG_I40E=y
# CONFIG_I40E_DCB is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not setCONFIG_IGC=yCONFIG_NET_VENDOR_MICROSOFT=y
# CONFIG_MICROSOFT_MANA is not set
# CONFIG_JME is not setCONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_PRESTERA is not setCONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not setCONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not setCONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not setCONFIG_NET_VENDOR_MICROSEMI=yCONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not setCONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not setCONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not setCONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not setCONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not setCONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not setCONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not setCONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not setCONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not setCONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not setCONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not setCONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not setCONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not setCONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not setCONFIG_R8169=yCONFIG_NET_VENDOR_RENESAS=yCONFIG_NET_VENDOR_ROCKER=y
# CONFIG_ROCKER is not setCONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not setCONFIG_NET_VENDOR_SEEQ=yCONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not setCONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not setCONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not setCONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not setCONFIG_NET_VENDOR_SOCIONEXT=yCONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not setCONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not setCONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not setCONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not setCONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not setCONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not setCONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not setCONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not setCONFIG_PHYLIB=y
# CONFIG_LED_TRIGGER_PHY is not set
# CONFIG_FIXED_PHY is not set
#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_ADIN_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AX88796B_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM84881_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MARVELL_88X2222_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_NXP_C45_TJA11XX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_QSEMI_PHY is not setCONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not setCONFIG_MDIO_DEVICE=yCONFIG_MDIO_BUS=yCONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_THUNDER is not set
#
# MDIO Multiplexers
#
#
# PCS device drivers
#
# CONFIG_PCS_XPCS is not set
# end of PCS device drivers
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not setCONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not setCONFIG_USB_RTL8152=y
# CONFIG_USB_LAN78XX is not setCONFIG_USB_USBNET=yCONFIG_USB_NET_AX8817X=yCONFIG_USB_NET_AX88179_178A=y
# CONFIG_USB_NET_CDCETHER is not set
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_CDC_NCM is not set
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
# CONFIG_USB_NET_CDC_MBIM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_NET_CH9200 is not set
# CONFIG_USB_NET_AQC111 is not setCONFIG_WLAN=yCONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not setCONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
# CONFIG_ATH11K is not setCONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not setCONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not setCONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not setCONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not setCONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_PRISM54 is not setCONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not setCONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
# CONFIG_MT76x0U is not set
# CONFIG_MT76x0E is not set
# CONFIG_MT76x2E is not set
# CONFIG_MT76x2U is not set
# CONFIG_MT7603E is not set
# CONFIG_MT7615E is not set
# CONFIG_MT7663U is not set
# CONFIG_MT7663S is not set
# CONFIG_MT7915E is not set
# CONFIG_MT7921E is not setCONFIG_WLAN_VENDOR_MICROCHIP=y
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not setCONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not setCONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not setCONFIG_RTL_CARDS=m
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not set
# CONFIG_RTW88 is not setCONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not setCONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not setCONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not setCONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not setCONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not setCONFIG_MAC80211_HWSIM=m
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_VIRT_WIFI is not set
# CONFIG_WAN is not setCONFIG_IEEE802154_DRIVERS=m
# CONFIG_IEEE802154_FAKELB is not set
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ATUSB is not set
# CONFIG_IEEE802154_ADF7242 is not set
# CONFIG_IEEE802154_CA8210 is not set
# CONFIG_IEEE802154_MCR20A is not set
# CONFIG_IEEE802154_HWSIM is not set
# CONFIG_WWAN is not setCONFIG_XEN_NETDEV_FRONTEND=y
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_HYPERV_NET is not setCONFIG_NETDEVSIM=mCONFIG_NET_FAILOVER=m
# CONFIG_ISDN is not set
# CONFIG_NVM is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_LEDS=yCONFIG_INPUT_FF_MEMLESS=mCONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=mCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_APPLESPI is not setCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_BYD=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=yCONFIG_MOUSE_PS2_CYPRESS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=yCONFIG_MOUSE_PS2_ELANTECH=yCONFIG_MOUSE_PS2_ELANTECH_SMBUS=yCONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not setCONFIG_MOUSE_PS2_FOCALTECH=yCONFIG_MOUSE_PS2_VMMOUSE=yCONFIG_MOUSE_PS2_SMBUS=yCONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not setCONFIG_MOUSE_CYAPA=mCONFIG_MOUSE_ELAN_I2C=mCONFIG_MOUSE_ELAN_I2C_I2C=yCONFIG_MOUSE_ELAN_I2C_SMBUS=yCONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not setCONFIG_MOUSE_SYNAPTICS_I2C=m
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not setCONFIG_RMI4_CORE=mCONFIG_RMI4_I2C=mCONFIG_RMI4_SPI=mCONFIG_RMI4_SMB=mCONFIG_RMI4_F03=yCONFIG_RMI4_F03_SERIO=mCONFIG_RMI4_2D_SENSOR=yCONFIG_RMI4_F11=yCONFIG_RMI4_F12=yCONFIG_RMI4_F30=yCONFIG_RMI4_F34=y
# CONFIG_RMI4_F3A is not set
# CONFIG_RMI4_F54 is not setCONFIG_RMI4_F55=y
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_ARCH_MIGHT_HAVE_PC_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=mCONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not setCONFIG_SERIO_ARC_PS2=mCONFIG_HYPERV_KEYBOARD=m
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports # end of Input device support
#
# Character devices
#CONFIG_TTY=yCONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_VT_CONSOLE_SLEEP=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not setCONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set # CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_EXAR=y CONFIG_SERIAL_8250_NR_UARTS=64 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_8250_DWLIB=y CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set CONFIG_SERIAL_8250_LPSS=y CONFIG_SERIAL_8250_MID=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not setCONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not setCONFIG_SERIAL_ARC=mCONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=yCONFIG_SERIAL_NONSTANDARD=y
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not setCONFIG_SYNCLINK_GT=mCONFIG_N_HDLC=mCONFIG_N_GSM=mCONFIG_NOZOMI=m
# CONFIG_NULL_TTY is not setCONFIG_HVC_DRIVER=yCONFIG_HVC_IRQ=yCONFIG_HVC_XEN=yCONFIG_HVC_XEN_FRONTEND=y
# CONFIG_SERIAL_DEV_BUS is not setCONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not setCONFIG_PPDEV=mCONFIG_VIRTIO_CONSOLE=mCONFIG_IPMI_HANDLER=mCONFIG_IPMI_DMI_DECODE=yCONFIG_IPMI_PLAT_DATA=yCONFIG_IPMI_PANIC_EVENT=yCONFIG_IPMI_PANIC_STRING=yCONFIG_IPMI_DEVICE_INTERFACE=mCONFIG_IPMI_SI=mCONFIG_IPMI_SSIF=mCONFIG_IPMI_WATCHDOG=mCONFIG_IPMI_POWEROFF=mCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_TIMERIOMEM=mCONFIG_HW_RANDOM_INTEL=mCONFIG_HW_RANDOM_AMD=m
# CONFIG_HW_RANDOM_BA431 is not setCONFIG_HW_RANDOM_VIA=mCONFIG_HW_RANDOM_VIRTIO=y
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not setCONFIG_DEVMEM=yCONFIG_NVRAM=yCONFIG_RAW_DRIVER=yCONFIG_MAX_RAW_DEVS=8192CONFIG_DEVPORT=yCONFIG_HPET=yCONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not setCONFIG_HANGCHECK_TIMER=mCONFIG_UV_MMTIMER=mCONFIG_TCG_TPM=yCONFIG_HW_RANDOM_TPM=yCONFIG_TCG_TIS_CORE=yCONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C_CR50 is not setCONFIG_TCG_TIS_I2C_ATMEL=mCONFIG_TCG_TIS_I2C_INFINEON=mCONFIG_TCG_TIS_I2C_NUVOTON=mCONFIG_TCG_NSC=mCONFIG_TCG_ATMEL=mCONFIG_TCG_INFINEON=m
# CONFIG_TCG_XEN is not setCONFIG_TCG_CRB=y
# CONFIG_TCG_VTPM_PROXY is not setCONFIG_TCG_TIS_ST33ZP24=mCONFIG_TCG_TIS_ST33ZP24_I2C=m
# CONFIG_TCG_TIS_ST33ZP24_SPI is not setCONFIG_TELCLOCK=m
# CONFIG_XILLYBUS is not set
# end of Character devices
# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
#
# I2C support
#CONFIG_I2C=yCONFIG_ACPI_I2C_OPREGION=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_COMPAT=yCONFIG_I2C_CHARDEV=mCONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_REG is not setCONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_SMBUS=yCONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not setCONFIG_I2C_AMD756=mCONFIG_I2C_AMD756_S4882=mCONFIG_I2C_AMD8111=m
# CONFIG_I2C_AMD_MP2 is not setCONFIG_I2C_I801=yCONFIG_I2C_ISCH=mCONFIG_I2C_ISMT=mCONFIG_I2C_PIIX4=mCONFIG_I2C_NFORCE2=mCONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not setCONFIG_I2C_SIS96X=mCONFIG_I2C_VIA=mCONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_CBUS_GPIO is not set CONFIG_I2C_DESIGNWARE_CORE=m
# CONFIG_I2C_DESIGNWARE_SLAVE is not set CONFIG_I2C_DESIGNWARE_PLATFORM=m CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set CONFIG_I2C_PCA_PLATFORM=mCONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_CP2615 is not setCONFIG_I2C_PARPORT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_MLXCPLD=m
# end of I2C Hardware Bus support
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not setCONFIG_SPI=y
# CONFIG_SPI_DEBUG is not setCONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_ALTERA_CORE is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_LANTIQ_SSC is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set
#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not setCONFIG_SPI_DYNAMIC=y
# CONFIG_SPMI is not set
# CONFIG_HSI is not setCONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not setCONFIG_PPS_CLIENT_LDISC=mCONFIG_PPS_CLIENT_PARPORT=mCONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#CONFIG_PTP_1588_CLOCK=y
# CONFIG_DP83640_PHY is not set
# CONFIG_PTP_1588_CLOCK_INES is not setCONFIG_PTP_1588_CLOCK_KVM=m
# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
# CONFIG_PTP_1588_CLOCK_IDTCM is not set
# CONFIG_PTP_1588_CLOCK_VMW is not set
# CONFIG_PTP_1588_CLOCK_OCP is not set
# end of PTP clock support
CONFIG_PINCTRL=yCONFIG_PINMUX=yCONFIG_PINCONF=yCONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not setCONFIG_PINCTRL_AMD=m
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SX150X is not setCONFIG_PINCTRL_BAYTRAIL=y
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_LYNXPOINT is not setCONFIG_PINCTRL_INTEL=y
# CONFIG_PINCTRL_ALDERLAKE is not setCONFIG_PINCTRL_BROXTON=mCONFIG_PINCTRL_CANNONLAKE=mCONFIG_PINCTRL_CEDARFORK=mCONFIG_PINCTRL_DENVERTON=m
# CONFIG_PINCTRL_ELKHARTLAKE is not set
# CONFIG_PINCTRL_EMMITSBURG is not setCONFIG_PINCTRL_GEMINILAKE=m
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_JASPERLAKE is not set
# CONFIG_PINCTRL_LAKEFIELD is not setCONFIG_PINCTRL_LEWISBURG=mCONFIG_PINCTRL_SUNRISEPOINT=m
# CONFIG_PINCTRL_TIGERLAKE is not set
#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers
CONFIG_GPIOLIB=yCONFIG_GPIOLIB_FASTPATH_LIMIT=512CONFIG_GPIO_ACPI=yCONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not setCONFIG_GPIO_CDEV=yCONFIG_GPIO_CDEV_V1=yCONFIG_GPIO_GENERIC=m
#
# Memory mapped GPIO drivers
#CONFIG_GPIO_AMDPT=m
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not setCONFIG_GPIO_ICH=m
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers
#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders
#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders
#
# USB GPIO expanders
#
# end of USB GPIO expanders
#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_MOCKUP is not set
# end of Virtual GPIO drivers
# CONFIG_W1 is not setCONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not setCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not setCONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ2515X is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not setCONFIG_CHARGER_SMB347=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_BD99954 is not setCONFIG_HWMON=yCONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#CONFIG_SENSORS_ABITUGURU=mCONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not setCONFIG_SENSORS_AD7414=mCONFIG_SENSORS_AD7418=mCONFIG_SENSORS_ADM1021=mCONFIG_SENSORS_ADM1025=mCONFIG_SENSORS_ADM1026=mCONFIG_SENSORS_ADM1029=mCONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM1177 is not setCONFIG_SENSORS_ADM9240=mCONFIG_SENSORS_ADT7X10=m
# CONFIG_SENSORS_ADT7310 is not setCONFIG_SENSORS_ADT7410=mCONFIG_SENSORS_ADT7411=mCONFIG_SENSORS_ADT7462=mCONFIG_SENSORS_ADT7470=mCONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AS370 is not setCONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_AXI_FAN_CONTROL is not setCONFIG_SENSORS_K8TEMP=mCONFIG_SENSORS_K10TEMP=mCONFIG_SENSORS_FAM15H_POWER=mCONFIG_SENSORS_APPLESMC=mCONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ASPEED is not setCONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
# CONFIG_SENSORS_DRIVETEMP is not setCONFIG_SENSORS_DS620=mCONFIG_SENSORS_DS1621=mCONFIG_SENSORS_DELL_SMM=mCONFIG_SENSORS_I5K_AMB=mCONFIG_SENSORS_F71805F=mCONFIG_SENSORS_F71882FG=mCONFIG_SENSORS_F75375S=mCONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not setCONFIG_SENSORS_GL518SM=mCONFIG_SENSORS_GL520SM=mCONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not setCONFIG_SENSORS_IBMAEM=mCONFIG_SENSORS_IBMPEX=mCONFIG_SENSORS_I5500=mCONFIG_SENSORS_CORETEMP=mCONFIG_SENSORS_IT87=mCONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not setCONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2947_SPI is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2992 is not setCONFIG_SENSORS_LTC4151=mCONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not setCONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not setCONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX127 is not setCONFIG_SENSORS_MAX16065=mCONFIG_SENSORS_MAX1619=mCONFIG_SENSORS_MAX1668=mCONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX6621 is not setCONFIG_SENSORS_MAX6639=mCONFIG_SENSORS_MAX6642=mCONFIG_SENSORS_MAX6650=mCONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not setCONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_MLXREG_FAN is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_ADCXX is not setCONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not setCONFIG_SENSORS_LM73=mCONFIG_SENSORS_LM75=mCONFIG_SENSORS_LM77=mCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM80=mCONFIG_SENSORS_LM83=mCONFIG_SENSORS_LM85=mCONFIG_SENSORS_LM87=mCONFIG_SENSORS_LM90=mCONFIG_SENSORS_LM92=mCONFIG_SENSORS_LM93=mCONFIG_SENSORS_LM95234=mCONFIG_SENSORS_LM95241=mCONFIG_SENSORS_LM95245=mCONFIG_SENSORS_PC87360=mCONFIG_SENSORS_PC87427=mCONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not setCONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not setCONFIG_SENSORS_PCF8591=mCONFIG_PMBUS=mCONFIG_SENSORS_PMBUS=m
# CONFIG_SENSORS_ADM1266 is not setCONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_BEL_PFE is not set
# CONFIG_SENSORS_BPA_RS600 is not set
# CONFIG_SENSORS_FSP_3Y is not set
# CONFIG_SENSORS_IBM_CFFPS is not set
# CONFIG_SENSORS_INSPUR_IPSPS is not set
# CONFIG_SENSORS_IR35221 is not set
# CONFIG_SENSORS_IR36021 is not set
# CONFIG_SENSORS_IR38064 is not set
# CONFIG_SENSORS_IRPS5401 is not set
# CONFIG_SENSORS_ISL68137 is not setCONFIG_SENSORS_LM25066=mCONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC3815 is not set
# CONFIG_SENSORS_MAX15301 is not setCONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX16601 is not set
# CONFIG_SENSORS_MAX20730 is not set
# CONFIG_SENSORS_MAX20751 is not set
# CONFIG_SENSORS_MAX31785 is not setCONFIG_SENSORS_MAX34440=mCONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_MP2975 is not set
# CONFIG_SENSORS_PM6764TR is not set
# CONFIG_SENSORS_PXE1610 is not set
# CONFIG_SENSORS_Q54SJ108A2 is not set
# CONFIG_SENSORS_STPDDC60 is not set
# CONFIG_SENSORS_TPS40422 is not set
# CONFIG_SENSORS_TPS53679 is not setCONFIG_SENSORS_UCD9000=mCONFIG_SENSORS_UCD9200=m
# CONFIG_SENSORS_XDPE122 is not setCONFIG_SENSORS_ZL6100=m
# CONFIG_SENSORS_SBTSI is not setCONFIG_SENSORS_SHT15=mCONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not setCONFIG_SENSORS_SIS5595=mCONFIG_SENSORS_DME1737=mCONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not setCONFIG_SENSORS_EMC6W201=mCONFIG_SENSORS_SMSC47M1=mCONFIG_SENSORS_SMSC47M192=mCONFIG_SENSORS_SMSC47B397=mCONFIG_SENSORS_SCH56XX_COMMON=mCONFIG_SENSORS_SCH5627=mCONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not setCONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not setCONFIG_SENSORS_AMC6821=mCONFIG_SENSORS_INA209=mCONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not setCONFIG_SENSORS_THMC50=mCONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not setCONFIG_SENSORS_TMP401=mCONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_TMP513 is not setCONFIG_SENSORS_VIA_CPUTEMP=mCONFIG_SENSORS_VIA686A=mCONFIG_SENSORS_VT1211=mCONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not setCONFIG_SENSORS_W83781D=mCONFIG_SENSORS_W83791D=mCONFIG_SENSORS_W83792D=mCONFIG_SENSORS_W83793=mCONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not setCONFIG_SENSORS_W83L785TS=mCONFIG_SENSORS_W83L786NG=mCONFIG_SENSORS_W83627HF=mCONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_XGENE is not set
#
# ACPI drivers
#CONFIG_SENSORS_ACPI_POWER=m CONFIG_SENSORS_ATK0110=mCONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_WRITABLE_TRIPS=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_BANG_BANG=y CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set
#
# Intel thermal drivers
#CONFIG_INTEL_POWERCLAMP=mCONFIG_X86_THERMAL_VECTOR=yCONFIG_X86_PKG_TEMP_THERMAL=mCONFIG_INTEL_SOC_DTS_IOSF_CORE=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#CONFIG_INT340X_THERMAL=mCONFIG_ACPI_THERMAL_REL=m
# CONFIG_INT3406_THERMAL is not setCONFIG_PROC_THERMAL_MMIO_RAPL=m
# end of ACPI INT340X thermal drivers
CONFIG_INTEL_PCH_THERMAL=m
# CONFIG_INTEL_TCC_COOLING is not set
# end of Intel thermal drivers
CONFIG_WATCHDOG=yCONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not setCONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=yCONFIG_WATCHDOG_OPEN_TIMEOUT=0CONFIG_WATCHDOG_SYSFS=y
#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=mCONFIG_WDAT_WDT=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_MLX_WDT is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not setCONFIG_ALIM1535_WDT=mCONFIG_ALIM7101_WDT=m
# CONFIG_EBC_C384_WDT is not setCONFIG_F71808E_WDT=mCONFIG_SP5100_TCO=mCONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not setCONFIG_IB700_WDT=mCONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not setCONFIG_I6300ESB_WDT=yCONFIG_IE6XX_WDT=mCONFIG_ITCO_WDT=yCONFIG_ITCO_VENDOR_SUPPORT=yCONFIG_IT8712F_WDT=mCONFIG_IT87_WDT=mCONFIG_HP_WATCHDOG=mCONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not setCONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not setCONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_TQMX86_WDT is not setCONFIG_VIA_WDT=mCONFIG_W83627HF_WDT=mCONFIG_W83877F_WDT=mCONFIG_W83977F_WDT=mCONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not setCONFIG_INTEL_MEI_WDT=m
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
# CONFIG_MEN_A21_WDT is not setCONFIG_XEN_WDT=m
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=mCONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not setCONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not setCONFIG_BCMA_POSSIBLE=yCONFIG_BCMA=mCONFIG_BCMA_HOST_PCI_POSSIBLE=yCONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not setCONFIG_BCMA_DRIVER_PCI=yCONFIG_BCMA_DRIVER_GMAC_CMN=yCONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not setCONFIG_LPC_ICH=yCONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not setCONFIG_MFD_INTEL_LPSS=yCONFIG_MFD_INTEL_LPSS_ACPI=yCONFIG_MFD_INTEL_LPSS_PCI=y
# CONFIG_MFD_INTEL_PMC_BXT is not set
# CONFIG_MFD_INTEL_PMT is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not setCONFIG_MFD_SM501=mCONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not setCONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_INTEL_M10_BMC is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not setCONFIG_RC_CORE=mCONFIG_RC_MAP=mCONFIG_LIRC=yCONFIG_RC_DECODERS=yCONFIG_IR_NEC_DECODER=mCONFIG_IR_RC5_DECODER=mCONFIG_IR_RC6_DECODER=mCONFIG_IR_JVC_DECODER=mCONFIG_IR_SONY_DECODER=mCONFIG_IR_SANYO_DECODER=m
# CONFIG_IR_SHARP_DECODER is not setCONFIG_IR_MCE_KBD_DECODER=m
# CONFIG_IR_XMP_DECODER is not setCONFIG_IR_IMON_DECODER=m
# CONFIG_IR_RCMM_DECODER is not setCONFIG_RC_DEVICES=y
# CONFIG_RC_ATI_REMOTE is not setCONFIG_IR_ENE=m
# CONFIG_IR_IMON is not set
# CONFIG_IR_IMON_RAW is not set
# CONFIG_IR_MCEUSB is not setCONFIG_IR_ITE_CIR=mCONFIG_IR_FINTEK=mCONFIG_IR_NUVOTON=m
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not setCONFIG_IR_WINBOND_CIR=m
# CONFIG_IR_IGORPLUGUSB is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_TTUSBIR is not set
# CONFIG_RC_LOOPBACK is not setCONFIG_IR_SERIAL=mCONFIG_IR_SERIAL_TRANSMITTER=yCONFIG_IR_SIR=m
# CONFIG_RC_XBOX_DVD is not set
# CONFIG_IR_TOY is not setCONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_CEC_CH7322 is not set
# CONFIG_CEC_SECO is not set
# CONFIG_USB_PULSE8_CEC is not set
# CONFIG_USB_RAINSHADOW_CEC is not setCONFIG_MEDIA_SUPPORT=m
# CONFIG_MEDIA_SUPPORT_FILTER is not set
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
#
# Media device types
#CONFIG_MEDIA_CAMERA_SUPPORT=yCONFIG_MEDIA_ANALOG_TV_SUPPORT=yCONFIG_MEDIA_DIGITAL_TV_SUPPORT=yCONFIG_MEDIA_RADIO_SUPPORT=yCONFIG_MEDIA_SDR_SUPPORT=yCONFIG_MEDIA_PLATFORM_SUPPORT=yCONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
#
# Media core support
#CONFIG_VIDEO_DEV=mCONFIG_MEDIA_CONTROLLER=yCONFIG_DVB_CORE=m
# end of Media core support
#
# Video4Linux options
#CONFIG_VIDEO_V4L2=mCONFIG_VIDEO_V4L2_I2C=yCONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
# end of Video4Linux options
#
# Media controller options
#
# CONFIG_MEDIA_CONTROLLER_DVB is not set
# end of Media controller options
#
# Digital TV options
#
# CONFIG_DVB_MMAP is not setCONFIG_DVB_NET=yCONFIG_DVB_MAX_ADAPTERS=16CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set
# end of Digital TV options
#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not setCONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not setCONFIG_VIDEOBUF2_CORE=mCONFIG_VIDEOBUF2_V4L2=mCONFIG_VIDEOBUF2_MEMOPS=mCONFIG_VIDEOBUF2_VMALLOC=m
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
# CONFIG_SDR_PLATFORM_DRIVERS is not set
#
# MMC/SDIO DVB adapters
#
# CONFIG_SMS_SDIO_DRV is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_TEST_DRIVERS is not set
#
# FireWire (IEEE 1394) Adapters
#
# CONFIG_DVB_FIREDTV is not set
# end of Media drivers
#
# Media ancillary drivers
#CONFIG_MEDIA_ATTACH=yCONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS3308 is not set
# CONFIG_VIDEO_CS5345 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_UDA1342 is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_VP27SMPX is not set
# CONFIG_VIDEO_SONY_BTF_MPX is not set
# end of Audio decoders, processors and mixers
#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set
# end of RDS decoders
#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_ADV7604 is not set
# CONFIG_VIDEO_ADV7842 is not set
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_ML86V7667 is not set
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_TC358743 is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_TW9910 is not set
# CONFIG_VIDEO_VPX3220 is not set
#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
# CONFIG_VIDEO_CX25840 is not set
# end of Video decoders
#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_ADV7511 is not set
# CONFIG_VIDEO_AD9389B is not set
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_THS8200 is not set
# end of Video encoders
#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
# end of Video improvement chips
#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set
# end of Audio/Video compression chips
#
# SDR tuner chips
#
# CONFIG_SDR_MAX2175 is not set
# end of SDR tuner chips
#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
# CONFIG_VIDEO_M52790 is not set
# CONFIG_VIDEO_I2C is not set
# CONFIG_VIDEO_ST_MIPID02 is not set
# end of Miscellaneous helper chips
#
# Camera sensor devices
#
# CONFIG_VIDEO_HI556 is not set
# CONFIG_VIDEO_IMX214 is not set
# CONFIG_VIDEO_IMX219 is not set
# CONFIG_VIDEO_IMX258 is not set
# CONFIG_VIDEO_IMX274 is not set
# CONFIG_VIDEO_IMX290 is not set
# CONFIG_VIDEO_IMX319 is not set
# CONFIG_VIDEO_IMX355 is not set
# CONFIG_VIDEO_OV02A10 is not set
# CONFIG_VIDEO_OV2640 is not set
# CONFIG_VIDEO_OV2659 is not set
# CONFIG_VIDEO_OV2680 is not set
# CONFIG_VIDEO_OV2685 is not set
# CONFIG_VIDEO_OV2740 is not set
# CONFIG_VIDEO_OV5647 is not set
# CONFIG_VIDEO_OV5648 is not set
# CONFIG_VIDEO_OV6650 is not set
# CONFIG_VIDEO_OV5670 is not set
# CONFIG_VIDEO_OV5675 is not set
# CONFIG_VIDEO_OV5695 is not set
# CONFIG_VIDEO_OV7251 is not set
# CONFIG_VIDEO_OV772X is not set
# CONFIG_VIDEO_OV7640 is not set
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_OV7740 is not set
# CONFIG_VIDEO_OV8856 is not set
# CONFIG_VIDEO_OV8865 is not set
# CONFIG_VIDEO_OV9640 is not set
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_OV9734 is not set
# CONFIG_VIDEO_OV13858 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_MT9M001 is not set
# CONFIG_VIDEO_MT9M032 is not set
# CONFIG_VIDEO_MT9M111 is not set
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T001 is not set
# CONFIG_VIDEO_MT9T112 is not set
# CONFIG_VIDEO_MT9V011 is not set
# CONFIG_VIDEO_MT9V032 is not set
# CONFIG_VIDEO_MT9V111 is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_VIDEO_M5MOLS is not set
# CONFIG_VIDEO_RDACM20 is not set
# CONFIG_VIDEO_RDACM21 is not set
# CONFIG_VIDEO_RJ54N1 is not set
# CONFIG_VIDEO_S5K6AA is not set
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_S5K4ECGX is not set
# CONFIG_VIDEO_S5K5BAF is not set
# CONFIG_VIDEO_CCS is not set
# CONFIG_VIDEO_ET8EK8 is not set
# CONFIG_VIDEO_S5C73M3 is not set
# end of Camera sensor devices
#
# Lens drivers
#
# CONFIG_VIDEO_AD5820 is not set
# CONFIG_VIDEO_AK7375 is not set
# CONFIG_VIDEO_DW9714 is not set
# CONFIG_VIDEO_DW9768 is not set
# CONFIG_VIDEO_DW9807_VCM is not set
# end of Lens drivers
#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set
# end of Flash devices
#
# SPI helper chips
#
# CONFIG_VIDEO_GS1662 is not set
# end of SPI helper chips
#
# Media SPI Adapters
#CONFIG_CXD2880_SPI_DRV=m
# end of Media SPI Adapters
CONFIG_MEDIA_TUNER=m
#
# Customize TV tuners
#CONFIG_MEDIA_TUNER_SIMPLE=mCONFIG_MEDIA_TUNER_TDA18250=mCONFIG_MEDIA_TUNER_TDA8290=mCONFIG_MEDIA_TUNER_TDA827X=mCONFIG_MEDIA_TUNER_TDA18271=mCONFIG_MEDIA_TUNER_TDA9887=mCONFIG_MEDIA_TUNER_TEA5761=mCONFIG_MEDIA_TUNER_TEA5767=mCONFIG_MEDIA_TUNER_MSI001=mCONFIG_MEDIA_TUNER_MT20XX=mCONFIG_MEDIA_TUNER_MT2060=mCONFIG_MEDIA_TUNER_MT2063=mCONFIG_MEDIA_TUNER_MT2266=mCONFIG_MEDIA_TUNER_MT2131=mCONFIG_MEDIA_TUNER_QT1010=mCONFIG_MEDIA_TUNER_XC2028=mCONFIG_MEDIA_TUNER_XC5000=mCONFIG_MEDIA_TUNER_XC4000=mCONFIG_MEDIA_TUNER_MXL5005S=mCONFIG_MEDIA_TUNER_MXL5007T=mCONFIG_MEDIA_TUNER_MC44S803=mCONFIG_MEDIA_TUNER_MAX2165=mCONFIG_MEDIA_TUNER_TDA18218=mCONFIG_MEDIA_TUNER_FC0011=mCONFIG_MEDIA_TUNER_FC0012=mCONFIG_MEDIA_TUNER_FC0013=mCONFIG_MEDIA_TUNER_TDA18212=mCONFIG_MEDIA_TUNER_E4000=mCONFIG_MEDIA_TUNER_FC2580=mCONFIG_MEDIA_TUNER_M88RS6000T=mCONFIG_MEDIA_TUNER_TUA9001=mCONFIG_MEDIA_TUNER_SI2157=mCONFIG_MEDIA_TUNER_IT913X=mCONFIG_MEDIA_TUNER_R820T=mCONFIG_MEDIA_TUNER_MXL301RF=mCONFIG_MEDIA_TUNER_QM1D1C0042=mCONFIG_MEDIA_TUNER_QM1D1B0004=m
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#CONFIG_DVB_STB0899=mCONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=mCONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=mCONFIG_DVB_STV6111=mCONFIG_DVB_MXL5XX=mCONFIG_DVB_M88DS3103=m
#
# Multistandard (cable + terrestrial) frontends
#CONFIG_DVB_DRXK=mCONFIG_DVB_TDA18271C2DD=mCONFIG_DVB_SI2165=mCONFIG_DVB_MN88472=mCONFIG_DVB_MN88473=m
#
# DVB-S (satellite) frontends
#CONFIG_DVB_CX24110=mCONFIG_DVB_CX24123=mCONFIG_DVB_MT312=mCONFIG_DVB_ZL10036=mCONFIG_DVB_ZL10039=mCONFIG_DVB_S5H1420=mCONFIG_DVB_STV0288=mCONFIG_DVB_STB6000=mCONFIG_DVB_STV0299=mCONFIG_DVB_STV6110=mCONFIG_DVB_STV0900=mCONFIG_DVB_TDA8083=mCONFIG_DVB_TDA10086=mCONFIG_DVB_TDA8261=mCONFIG_DVB_VES1X93=mCONFIG_DVB_TUNER_ITD1000=mCONFIG_DVB_TUNER_CX24113=mCONFIG_DVB_TDA826X=mCONFIG_DVB_TUA6100=mCONFIG_DVB_CX24116=mCONFIG_DVB_CX24117=mCONFIG_DVB_CX24120=mCONFIG_DVB_SI21XX=mCONFIG_DVB_TS2020=mCONFIG_DVB_DS3000=mCONFIG_DVB_MB86A16=mCONFIG_DVB_TDA10071=m
#
# DVB-T (terrestrial) frontends
#CONFIG_DVB_SP8870=mCONFIG_DVB_SP887X=mCONFIG_DVB_CX22700=mCONFIG_DVB_CX22702=mCONFIG_DVB_S5H1432=mCONFIG_DVB_DRXD=mCONFIG_DVB_L64781=mCONFIG_DVB_TDA1004X=mCONFIG_DVB_NXT6000=mCONFIG_DVB_MT352=mCONFIG_DVB_ZL10353=mCONFIG_DVB_DIB3000MB=mCONFIG_DVB_DIB3000MC=mCONFIG_DVB_DIB7000M=mCONFIG_DVB_DIB7000P=mCONFIG_DVB_DIB9000=mCONFIG_DVB_TDA10048=mCONFIG_DVB_AF9013=mCONFIG_DVB_EC100=mCONFIG_DVB_STV0367=mCONFIG_DVB_CXD2820R=mCONFIG_DVB_CXD2841ER=mCONFIG_DVB_RTL2830=mCONFIG_DVB_RTL2832=mCONFIG_DVB_RTL2832_SDR=mCONFIG_DVB_SI2168=mCONFIG_DVB_ZD1301_DEMOD=mCONFIG_DVB_CXD2880=m
#
# DVB-C (cable) frontends
#CONFIG_DVB_VES1820=mCONFIG_DVB_TDA10021=mCONFIG_DVB_TDA10023=mCONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #CONFIG_DVB_NXT200X=mCONFIG_DVB_OR51211=mCONFIG_DVB_OR51132=mCONFIG_DVB_BCM3510=mCONFIG_DVB_LGDT330X=mCONFIG_DVB_LGDT3305=mCONFIG_DVB_LGDT3306A=mCONFIG_DVB_LG2160=mCONFIG_DVB_S5H1409=mCONFIG_DVB_AU8522=mCONFIG_DVB_AU8522_DTV=mCONFIG_DVB_AU8522_V4L=mCONFIG_DVB_S5H1411=mCONFIG_DVB_MXL692=m
#
# ISDB-T (terrestrial) frontends
#CONFIG_DVB_S921=mCONFIG_DVB_DIB8000=mCONFIG_DVB_MB86A20S=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends #CONFIG_DVB_TC90522=mCONFIG_DVB_MN88443X=m
#
# Digital terrestrial only tuners/PLL
#CONFIG_DVB_PLL=mCONFIG_DVB_TUNER_DIB0070=mCONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#CONFIG_DVB_DRX39XYJ=mCONFIG_DVB_LNBH25=mCONFIG_DVB_LNBH29=mCONFIG_DVB_LNBP21=mCONFIG_DVB_LNBP22=mCONFIG_DVB_ISL6405=mCONFIG_DVB_ISL6421=mCONFIG_DVB_ISL6423=mCONFIG_DVB_A8293=mCONFIG_DVB_LGS8GL5=mCONFIG_DVB_LGS8GXX=mCONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=mCONFIG_DVB_IX2505V=mCONFIG_DVB_M88RS2000=mCONFIG_DVB_AF9033=mCONFIG_DVB_HORUS3A=mCONFIG_DVB_ASCOT2E=mCONFIG_DVB_HELENE=m
#
# Common Interface (EN50221) controller drivers
#CONFIG_DVB_CXD2099=mCONFIG_DVB_SP2=m
# end of Customise DVB Frontends
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
# end of Media ancillary drivers
#
# Graphics support
#
# CONFIG_AGP is not setCONFIG_INTEL_GTT=mCONFIG_VGA_ARB=yCONFIG_VGA_ARB_MAX_GPUS=64CONFIG_VGA_SWITCHEROO=yCONFIG_DRM=mCONFIG_DRM_MIPI_DSI=yCONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DEBUG_SELFTEST is not setCONFIG_DRM_KMS_HELPER=mCONFIG_DRM_KMS_FB_HELPER=yCONFIG_DRM_FBDEV_EMULATION=yCONFIG_DRM_FBDEV_OVERALLOC=100CONFIG_DRM_LOAD_EDID_FIRMWARE=y
# CONFIG_DRM_DP_CEC is not setCONFIG_DRM_TTM=mCONFIG_DRM_VRAM_HELPER=mCONFIG_DRM_TTM_HELPER=mCONFIG_DRM_GEM_SHMEM_HELPER=y
#
# I2C encoder or helper chips
#CONFIG_DRM_I2C_CH7006=mCONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
# end of ARM devices
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not setCONFIG_DRM_I915=mCONFIG_DRM_I915_FORCE_PROBE=""CONFIG_DRM_I915_CAPTURE_ERROR=yCONFIG_DRM_I915_COMPRESS_ERROR=yCONFIG_DRM_I915_USERPTR=yCONFIG_DRM_I915_GVT=yCONFIG_DRM_I915_GVT_KVMGT=mCONFIG_DRM_I915_REQUEST_TIMEOUT=20000CONFIG_DRM_I915_FENCE_TIMEOUT=10000CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500CONFIG_DRM_I915_PREEMPT_TIMEOUT=640CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000CONFIG_DRM_I915_STOP_TIMEOUT=100CONFIG_DRM_I915_TIMESLICE_DURATION=1
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_VMWGFX is not setCONFIG_DRM_GMA500=m
# CONFIG_DRM_UDL is not setCONFIG_DRM_AST=mCONFIG_DRM_MGAG200=mCONFIG_DRM_QXL=mCONFIG_DRM_BOCHS=mCONFIG_DRM_VIRTIO_GPU=mCONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# end of Display Panels
CONFIG_DRM_BRIDGE=yCONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# end of Display Interface Bridges
# CONFIG_DRM_ETNAVIV is not setCONFIG_DRM_CIRRUS_QEMU=m
# CONFIG_DRM_GM12U320 is not set
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_ILI9486 is not set
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
# CONFIG_TINYDRM_ST7735R is not set
# CONFIG_DRM_XEN_FRONTEND is not set
# CONFIG_DRM_VBOXVIDEO is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_LEGACY is not setCONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
#
# Frame buffer Devices
#CONFIG_FB_CMDLINE=yCONFIG_FB_NOTIFY=yCONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not setCONFIG_FB_BOOT_VESA_SUPPORT=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=yCONFIG_FB_SYS_FILLRECT=mCONFIG_FB_SYS_COPYAREA=mCONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not setCONFIG_FB_SYS_FOPS=mCONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_MODE_HELPERS is not setCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not setCONFIG_FB_VESA=yCONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not setCONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not setCONFIG_LCD_PLATFORM=m
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
# CONFIG_LCD_OTM3225A is not setCONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_PWM is not setCONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not setCONFIG_BACKLIGHT_LP855X=m
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support
CONFIG_HDMI=y
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=80 CONFIG_DUMMY_CONSOLE_ROWS=25 CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not setCONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support
# CONFIG_SOUND is not set
#
# HID support
#CONFIG_HID=yCONFIG_HID_BATTERY_STRENGTH=yCONFIG_HIDRAW=yCONFIG_UHID=mCONFIG_HID_GENERIC=y
#
# Special HID drivers
#CONFIG_HID_A4TECH=m
# CONFIG_HID_ACCUTOUCH is not setCONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not setCONFIG_HID_APPLE=m
# CONFIG_HID_APPLEIR is not setCONFIG_HID_ASUS=mCONFIG_HID_AUREAL=mCONFIG_HID_BELKIN=m
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not setCONFIG_HID_CHERRY=mCONFIG_HID_CHICONY=m
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not setCONFIG_HID_CMEDIA=m
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CREATIVE_SB0540 is not setCONFIG_HID_CYPRESS=mCONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not setCONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not setCONFIG_HID_EZKEY=m
# CONFIG_HID_FT260 is not setCONFIG_HID_GEMBIRD=mCONFIG_HID_GFRM=m
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_GT683R is not setCONFIG_HID_KEYTOUCH=mCONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not setCONFIG_HID_WALTOP=m
# CONFIG_HID_VIEWSONIC is not setCONFIG_HID_GYRATION=mCONFIG_HID_ICADE=mCONFIG_HID_ITE=mCONFIG_HID_JABRA=mCONFIG_HID_TWINHAN=mCONFIG_HID_KENSINGTON=mCONFIG_HID_LCPOWER=mCONFIG_HID_LED=mCONFIG_HID_LENOVO=mCONFIG_HID_LOGITECH=mCONFIG_HID_LOGITECH_DJ=mCONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not setCONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not setCONFIG_HID_MICROSOFT=mCONFIG_HID_MONTEREY=mCONFIG_HID_MULTITOUCH=mCONFIG_HID_NTI=m
# CONFIG_HID_NTRIG is not setCONFIG_HID_ORTEK=mCONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not setCONFIG_HID_PETALYNX=mCONFIG_HID_PICOLCD=mCONFIG_HID_PICOLCD_FB=yCONFIG_HID_PICOLCD_BACKLIGHT=yCONFIG_HID_PICOLCD_LCD=yCONFIG_HID_PICOLCD_LEDS=yCONFIG_HID_PICOLCD_CIR=yCONFIG_HID_PLANTRONICS=m
# CONFIG_HID_PLAYSTATION is not setCONFIG_HID_PRIMAX=m
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not setCONFIG_HID_SAITEK=mCONFIG_HID_SAMSUNG=m
# CONFIG_HID_SONY is not setCONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEAM is not setCONFIG_HID_STEELSERIES=mCONFIG_HID_SUNPLUS=mCONFIG_HID_RMI=mCONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not setCONFIG_HID_HYPERV_MOUSE=mCONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not setCONFIG_HID_TIVO=mCONFIG_HID_TOPSEED=mCONFIG_HID_THINGM=mCONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
# CONFIG_HID_WACOM is not setCONFIG_HID_WIIMOTE=mCONFIG_HID_XINMO=mCONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not setCONFIG_HID_ZYDACRON=mCONFIG_HID_SENSOR_HUB=yCONFIG_HID_SENSOR_CUSTOM_SENSOR=mCONFIG_HID_ALPS=m
# CONFIG_HID_MCP2221 is not set
# end of Special HID drivers
#
# USB HID support
#CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
# end of USB HID support
#
# I2C HID support
#
# CONFIG_I2C_HID_ACPI is not set
# end of I2C HID support
#
# Intel ISH HID support
#CONFIG_INTEL_ISH_HID=m
# CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER is not set
# end of Intel ISH HID support
#
# AMD SFH HID Support
#
# CONFIG_AMD_SFH_HID is not set
# end of AMD SFH HID Support # end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_SUPPORT=yCONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not setCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB=yCONFIG_USB_PCI=yCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not setCONFIG_USB_LEDS_TRIGGER_USBPORT=yCONFIG_USB_AUTOSUSPEND_DELAY=2CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not setCONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not setCONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PCI_RENESAS is not set
# CONFIG_USB_XHCI_PLATFORM is not setCONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not setCONFIG_USB_OHCI_HCD=yCONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not setCONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_REALTEK is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_STORAGE_ENE_UB6250 is not set # CONFIG_USB_UAS is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not setCONFIG_USB_SERIAL=mCONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_XR is not setCONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_USB_ATM is not set
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not setCONFIG_TYPEC=y
# CONFIG_TYPEC_TCPM is not setCONFIG_TYPEC_UCSI=y
# CONFIG_UCSI_CCG is not setCONFIG_UCSI_ACPI=y
# CONFIG_TYPEC_TPS6598X is not set
# CONFIG_TYPEC_STUSB160X is not set
#
# USB Type-C Multiplexer/DeMultiplexer Switch support #
# CONFIG_TYPEC_MUX_PI3USB30532 is not set
# end of USB Type-C Multiplexer/DeMultiplexer Switch support
#
# USB Type-C Alternate Mode drivers
#
# CONFIG_TYPEC_DP_ALTMODE is not set
# end of USB Type-C Alternate Mode drivers
# CONFIG_USB_ROLE_SWITCH is not setCONFIG_MMC=mCONFIG_MMC_BLOCK=mCONFIG_MMC_BLOCK_MINORS=8CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not setCONFIG_MMC_SDHCI=mCONFIG_MMC_SDHCI_IO_ACCESSORS=yCONFIG_MMC_SDHCI_PCI=mCONFIG_MMC_RICOH_MMC=yCONFIG_MMC_SDHCI_ACPI=mCONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_REALTEK_PCI is not setCONFIG_MMC_CQHCI=m
# CONFIG_MMC_HSQ is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_SDHCI_XENON is not set
# CONFIG_MEMSTICK is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
# CONFIG_LEDS_APU is not setCONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not setCONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
# CONFIG_LEDS_LP50XX is not setCONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not setCONFIG_LEDS_INTEL_SS4200=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) #CONFIG_LEDS_BLINKM=mCONFIG_LEDS_MLXCPLD=m
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set
#
# Flash and Torch LED drivers
#
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=mCONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not setCONFIG_LEDS_TRIGGER_HEARTBEAT=mCONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not setCONFIG_LEDS_TRIGGER_GPIO=mCONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target) # CONFIG_LEDS_TRIGGER_TRANSIENT=m CONFIG_LEDS_TRIGGER_CAMERA=m # CONFIG_LEDS_TRIGGER_PANIC is not set # CONFIG_LEDS_TRIGGER_NETDEV is not set # CONFIG_LEDS_TRIGGER_PATTERN is not set CONFIG_LEDS_TRIGGER_AUDIO=m # CONFIG_LEDS_TRIGGER_TTY is not set # CONFIG_ACCESSIBILITY is not set CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_MAD=m CONFIG_INFINIBAND_USER_ACCESS=m CONFIG_INFINIBAND_USER_MEM=y CONFIG_INFINIBAND_ON_DEMAND_PAGING=y CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y CONFIG_INFINIBAND_VIRT_DMA=y # CONFIG_INFINIBAND_MTHCA is not set # CONFIG_INFINIBAND_EFA is not set # CONFIG_INFINIBAND_I40IW is not set # CONFIG_MLX4_INFINIBAND is not set # CONFIG_INFINIBAND_OCRDMA is not set # CONFIG_INFINIBAND_USNIC is not set # CONFIG_INFINIBAND_RDMAVT is not set CONFIG_RDMA_RXE=m CONFIG_RDMA_SIW=m CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_CM is not set CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_SRPT=m # CONFIG_INFINIBAND_ISER is not set # CONFIG_INFINIBAND_ISERT is not set # CONFIG_INFINIBAND_RTRS_CLIENT is not set # CONFIG_INFINIBAND_RTRS_SERVER is not set # CONFIG_INFINIBAND_OPA_VNIC is not set CONFIG_EDAC_ATOMIC_SCRUB=y CONFIG_EDAC_SUPPORT=y CONFIG_EDAC=y CONFIG_EDAC_LEGACY_SYSFS=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_DECODE_MCE=m CONFIG_EDAC_GHES=y CONFIG_EDAC_AMD64=m CONFIG_EDAC_E752X=m CONFIG_EDAC_I82975X=m CONFIG_EDAC_I3000=m CONFIG_EDAC_I3200=m CONFIG_EDAC_IE31200=m CONFIG_EDAC_X38=m CONFIG_EDAC_I5400=m CONFIG_EDAC_I7CORE=m CONFIG_EDAC_I5000=m CONFIG_EDAC_I5100=m CONFIG_EDAC_I7300=m CONFIG_EDAC_SBRIDGE=m CONFIG_EDAC_SKX=m # CONFIG_EDAC_I10NM is not set CONFIG_EDAC_PND2=m # CONFIG_EDAC_IGEN6 is not set CONFIG_RTC_LIB=y CONFIG_RTC_MC146818_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_SYSTOHC is not set # CONFIG_RTC_DEBUG is not set CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not setCONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1307_CENTURY is not setCONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not setCONFIG_RTC_DRV_DS1672=mCONFIG_RTC_DRV_MAX6900=mCONFIG_RTC_DRV_RS5C372=mCONFIG_RTC_DRV_ISL1208=mCONFIG_RTC_DRV_ISL12022=mCONFIG_RTC_DRV_X1205=mCONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not setCONFIG_RTC_DRV_PCF8563=mCONFIG_RTC_DRV_PCF8583=mCONFIG_RTC_DRV_M41T80=mCONFIG_RTC_DRV_M41T80_WDT=yCONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not setCONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not setCONFIG_RTC_DRV_RX8581=mCONFIG_RTC_DRV_RX8025=mCONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not setCONFIG_RTC_DRV_RX4581=m
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not setCONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#CONFIG_RTC_DRV_DS3232=mCONFIG_RTC_DRV_DS3232_HWMON=y
# CONFIG_RTC_DRV_PCF2127 is not setCONFIG_RTC_DRV_RV3029C2=m
# CONFIG_RTC_DRV_RV3029_HWMON is not set
# CONFIG_RTC_DRV_RX6110 is not set
#
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=yCONFIG_RTC_DRV_DS1286=mCONFIG_RTC_DRV_DS1511=mCONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not setCONFIG_RTC_DRV_DS1742=mCONFIG_RTC_DRV_DS2404=mCONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not setCONFIG_RTC_DRV_M48T35=mCONFIG_RTC_DRV_M48T59=mCONFIG_RTC_DRV_MSM6242=mCONFIG_RTC_DRV_BQ4802=mCONFIG_RTC_DRV_RP5C01=mCONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not setCONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#CONFIG_DMA_ENGINE=yCONFIG_DMA_VIRTUAL_CHANNELS=yCONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not setCONFIG_INTEL_IDMA64=m
# CONFIG_INTEL_IDXD is not setCONFIG_INTEL_IOATDMA=m
# CONFIG_PLX_DMA is not set
# CONFIG_XILINX_ZYNQMP_DPDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not setCONFIG_DW_DMAC_CORE=yCONFIG_DW_DMAC=mCONFIG_DW_DMAC_PCI=y
# CONFIG_DW_EDMA is not set
# CONFIG_DW_EDMA_PCIE is not setCONFIG_HSU_DMA=y
# CONFIG_SF_PDMA is not set
# CONFIG_INTEL_LDMA is not set
#
# DMA Clients
#CONFIG_ASYNC_TX_DMA=yCONFIG_DMATEST=mCONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options
CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
# CONFIG_PANEL is not setCONFIG_UIO=mCONFIG_UIO_CIF=mCONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not setCONFIG_UIO_AEC=mCONFIG_UIO_SERCOS3=mCONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not setCONFIG_UIO_HV_GENERIC=mCONFIG_VFIO_IOMMU_TYPE1=mCONFIG_VFIO_VIRQFD=mCONFIG_VFIO=mCONFIG_VFIO_NOIOMMU=yCONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not setCONFIG_VFIO_PCI_MMAP=yCONFIG_VFIO_PCI_INTX=y
# CONFIG_VFIO_PCI_IGD is not setCONFIG_VFIO_MDEV=mCONFIG_VFIO_MDEV_DEVICE=mCONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not setCONFIG_VIRTIO=yCONFIG_ARCH_HAS_RESTRICTED_VIRTIO_MEMORY_ACCESS=yCONFIG_VIRTIO_PCI_LIB=yCONFIG_VIRTIO_MENU=yCONFIG_VIRTIO_PCI=yCONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_PMEM is not setCONFIG_VIRTIO_BALLOON=mCONFIG_VIRTIO_MEM=mCONFIG_VIRTIO_INPUT=m
# CONFIG_VIRTIO_MMIO is not setCONFIG_VIRTIO_DMA_SHARED_BUFFER=m
# CONFIG_VDPA is not setCONFIG_VHOST_IOTLB=mCONFIG_VHOST=mCONFIG_VHOST_MENU=yCONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not setCONFIG_VHOST_VSOCK=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#CONFIG_HYPERV=mCONFIG_HYPERV_TIMER=yCONFIG_HYPERV_UTILS=mCONFIG_HYPERV_BALLOON=m
# end of Microsoft Hyper-V guest support
#
# Xen driver support
#
# CONFIG_XEN_BALLOON is not setCONFIG_XEN_DEV_EVTCHN=m
# CONFIG_XEN_BACKEND is not setCONFIG_XENFS=mCONFIG_XEN_COMPAT_XENFS=yCONFIG_XEN_SYS_HYPERVISOR=yCONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
# CONFIG_XEN_GRANT_DMA_ALLOC is not setCONFIG_SWIOTLB_XEN=y
# CONFIG_XEN_PVCALLS_FRONTEND is not setCONFIG_XEN_PRIVCMD=mCONFIG_XEN_EFI=yCONFIG_XEN_AUTO_XLATE=yCONFIG_XEN_ACPI=y
# CONFIG_XEN_UNPOPULATED_ALLOC is not set
# end of Xen driver support
# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not setCONFIG_X86_PLATFORM_DEVICES=yCONFIG_ACPI_WMI=mCONFIG_WMI_BMOF=m
# CONFIG_HUAWEI_WMI is not set
# CONFIG_UV_SYSFS is not set
# CONFIG_INTEL_WMI_SBL_FW_UPDATE is not setCONFIG_INTEL_WMI_THUNDERBOLT=mCONFIG_MXM_WMI=m
# CONFIG_PEAQ_WMI is not set
# CONFIG_XIAOMI_WMI is not set
# CONFIG_GIGABYTE_WMI is not setCONFIG_ACERHDF=m
# CONFIG_ACER_WIRELESS is not setCONFIG_ACER_WMI=m
# CONFIG_AMD_PMC is not set
# CONFIG_ADV_SWBUTTON is not setCONFIG_APPLE_GMUX=mCONFIG_ASUS_LAPTOP=m
# CONFIG_ASUS_WIRELESS is not setCONFIG_ASUS_WMI=mCONFIG_ASUS_NB_WMI=mCONFIG_EEEPC_LAPTOP=mCONFIG_EEEPC_WMI=m
# CONFIG_X86_PLATFORM_DRIVERS_DELL is not setCONFIG_AMILO_RFKILL=mCONFIG_FUJITSU_LAPTOP=mCONFIG_FUJITSU_TABLET=m
# CONFIG_GPD_POCKET_FAN is not setCONFIG_HP_ACCEL=mCONFIG_HP_WIRELESS=mCONFIG_HP_WMI=m
# CONFIG_IBM_RTL is not setCONFIG_IDEAPAD_LAPTOP=mCONFIG_SENSORS_HDAPS=mCONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not setCONFIG_THINKPAD_ACPI_VIDEO=yCONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
# CONFIG_INTEL_ATOMISP2_PM is not setCONFIG_INTEL_HID_EVENT=m
# CONFIG_INTEL_INT0002_VGPIO is not set
# CONFIG_INTEL_MENLOW is not setCONFIG_INTEL_OAKTRAIL=mCONFIG_INTEL_VBTN=mCONFIG_MSI_LAPTOP=mCONFIG_MSI_WMI=m
# CONFIG_PCENGINES_APU2 is not setCONFIG_SAMSUNG_LAPTOP=mCONFIG_SAMSUNG_Q10=mCONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not setCONFIG_ACPI_CMPC=mCONFIG_COMPAL_LAPTOP=m
# CONFIG_LG_LAPTOP is not setCONFIG_PANASONIC_LAPTOP=mCONFIG_SONY_LAPTOP=mCONFIG_SONYPI_COMPAT=y
# CONFIG_SYSTEM76_ACPI is not setCONFIG_TOPSTAR_LAPTOP=m
# CONFIG_I2C_MULTI_INSTANTIATE is not setCONFIG_MLX_PLATFORM=mCONFIG_INTEL_IPS=mCONFIG_INTEL_RST=m
# CONFIG_INTEL_SMARTCONNECT is not set
#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support
CONFIG_INTEL_TURBO_MAX_3=y
# CONFIG_INTEL_UNCORE_FREQ_CONTROL is not setCONFIG_INTEL_PMC_CORE=m
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_INTEL_SCU_PCI is not set
# CONFIG_INTEL_SCU_PLATFORM is not setCONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not setCONFIG_MELLANOX_PLATFORM=yCONFIG_MLXREG_HOTPLUG=m
# CONFIG_MLXREG_IO is not setCONFIG_SURFACE_PLATFORMS=y
# CONFIG_SURFACE3_WMI is not set
# CONFIG_SURFACE_3_POWER_OPREGION is not set
# CONFIG_SURFACE_GPE is not set
# CONFIG_SURFACE_HOTPLUG is not set
# CONFIG_SURFACE_PRO3_BUTTON is not setCONFIG_HAVE_CLK=yCONFIG_CLKDEV_LOOKUP=yCONFIG_HAVE_CLK_PREPARE=yCONFIG_COMMON_CLK=y
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_XILINX_VCU is not setCONFIG_HWSPINLOCK=y
#
# Clock Source drivers
#CONFIG_CLKEVT_I8253=yCONFIG_I8253_LOCK=yCONFIG_CLKBLD_I8253=y
# end of Clock Source drivers
CONFIG_MAILBOX=yCONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not setCONFIG_IOMMU_IOVA=yCONFIG_IOASID=yCONFIG_IOMMU_API=yCONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#CONFIG_IOMMU_IO_PGTABLE=y
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set CONFIG_IOMMU_DMA=yCONFIG_AMD_IOMMU=yCONFIG_AMD_IOMMU_V2=mCONFIG_DMAR_TABLE=yCONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set CONFIG_INTEL_IOMMU_FLOPPY_WA=y
# CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON is not set CONFIG_IRQ_REMAP=yCONFIG_HYPERV_IOMMU=y
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers # end of SOC (System On Chip) specific Drivers
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not setCONFIG_NTB=m
# CONFIG_NTB_MSI is not set
# CONFIG_NTB_AMD is not set
# CONFIG_NTB_IDT is not set
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_EPF is not set
# CONFIG_NTB_SWITCHTEC is not set
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_TRANSPORT is not set
# CONFIG_VME_BUS is not setCONFIG_PWM=yCONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_DWC is not setCONFIG_PWM_LPSS=mCONFIG_PWM_LPSS_PCI=mCONFIG_PWM_LPSS_PLATFORM=m
# CONFIG_PWM_PCA9685 is not set
#
# IRQ chip support
#
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_USB_LGM_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem
CONFIG_POWERCAP=yCONFIG_INTEL_RAPL_CORE=mCONFIG_INTEL_RAPL=m
# CONFIG_IDLE_INJECT is not set
# CONFIG_DTPM is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# end of Performance monitor support
CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
# CONFIG_USB4 is not set
#
# Android
#
# CONFIG_ANDROID is not set
# end of Android
CONFIG_LIBNVDIMM=mCONFIG_BLK_DEV_PMEM=mCONFIG_ND_BLK=mCONFIG_ND_CLAIM=yCONFIG_ND_BTT=mCONFIG_BTT=yCONFIG_ND_PFN=mCONFIG_NVDIMM_PFN=yCONFIG_NVDIMM_DAX=yCONFIG_NVDIMM_KEYS=yCONFIG_DAX_DRIVER=yCONFIG_DAX=yCONFIG_DEV_DAX=mCONFIG_DEV_DAX_PMEM=mCONFIG_DEV_DAX_KMEM=mCONFIG_DEV_DAX_PMEM_COMPAT=mCONFIG_NVMEM=yCONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_RMEM is not set
#
# HW tracing support
#CONFIG_STM=m
# CONFIG_STM_PROTO_BASIC is not set
# CONFIG_STM_PROTO_SYS_T is not setCONFIG_STM_DUMMY=mCONFIG_STM_SOURCE_CONSOLE=mCONFIG_STM_SOURCE_HEARTBEAT=mCONFIG_STM_SOURCE_FTRACE=mCONFIG_INTEL_TH=mCONFIG_INTEL_TH_PCI=mCONFIG_INTEL_TH_ACPI=mCONFIG_INTEL_TH_GTH=mCONFIG_INTEL_TH_STH=mCONFIG_INTEL_TH_MSU=mCONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_TEE is not set
# CONFIG_UNISYS_VISORBUS is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# end of Device Drivers
#
# File systems
#CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set CONFIG_FS_IOMAP=yCONFIG_EXT2_FS=mCONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT3_FS is not setCONFIG_EXT4_FS=yCONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set CONFIG_EXT4_KUNIT_TESTS=mCONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not setCONFIG_XFS_FS=mCONFIG_XFS_SUPPORT_V4=yCONFIG_XFS_QUOTA=yCONFIG_XFS_POSIX_ACL=yCONFIG_XFS_RT=yCONFIG_XFS_ONLINE_SCRUB=y CONFIG_XFS_ONLINE_REPAIR=yCONFIG_XFS_DEBUG=yCONFIG_XFS_ASSERT_FATAL=yCONFIG_GFS2_FS=mCONFIG_GFS2_FS_LOCKING_DLM=y CONFIG_OCFS2_FS=mCONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m CONFIG_OCFS2_FS_STATS=y CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set CONFIG_BTRFS_FS=mCONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set # CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set # CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set CONFIG_F2FS_FS=mCONFIG_F2FS_STAT_FS=yCONFIG_F2FS_FS_XATTR=y CONFIG_F2FS_FS_POSIX_ACL=y CONFIG_F2FS_FS_SECURITY=y
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_F2FS_FS_COMPRESSION is not set
# CONFIG_ZONEFS_FS is not setCONFIG_FS_DAX=yCONFIG_FS_DAX_PMD=yCONFIG_FS_POSIX_ACL=yCONFIG_EXPORTFS=yCONFIG_EXPORTFS_BLOCK_OPS=y CONFIG_FILE_LOCKING=y CONFIG_MANDATORY_FILE_LOCKING=y CONFIG_FS_ENCRYPTION=y CONFIG_FS_ENCRYPTION_ALGS=y
# CONFIG_FS_VERITY is not set CONFIG_FSNOTIFY=yCONFIG_DNOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_FANOTIFY=y CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not setCONFIG_QFMT_V2=yCONFIG_QUOTACTL=yCONFIG_AUTOFS4_FS=yCONFIG_AUTOFS_FS=yCONFIG_FUSE_FS=mCONFIG_CUSE=m
# CONFIG_VIRTIO_FS is not set CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set # CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set
1,412 lines not shown · raw message
Part of this message is not shown here. View the raw message.