Skip to contentSkip to conversation

net: ieee802154: fix null deref in parse dev addr

PATCH New Sasha Levin 1 participant 21 messages Jun 7, 2021

Subsystems (12)
lore
Share & tools
lore
author maintainer
#6 lore raw

PATCH 7/21 gfs2: Prevent direct-I/O write fallback errors from getting lost

In reply to Sasha Levin

From: Andreas Gruenbacher <[email protected]>

[ Upstream commit 43a511c44e58e357a687d61a20cf5ef1dc9e5a7c ]

When a direct I/O write falls entirely and falls back to buffered I/O and the buffered I/O fails, the write failed with return value 0 instead of the error number reported by the buffered I/O. Fix that.

---
 fs/gfs2/file.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
fs/gfs2/file.c +4 -1
index 143e7d518c5d..7c69486d556f 100644
@@ -822,8 +822,11 @@ static ssize_t gfs2_file_write_iter(struct kiocb *iocb, struct iov_iter *from)
 		current->backing_dev_info = inode_to_bdi(inode);
 		buffered = iomap_file_buffered_write(iocb, from, &gfs2_iomap_ops);
 		current->backing_dev_info = NULL;
-		if (unlikely(buffered <= 0))
+		if (unlikely(buffered <= 0)) {
+			if (!ret)
+				ret = buffered;
 			goto out_unlock;
+		}
 
 		/*
 		 * We need to ensure that the page cache pages are written to
Signature · 1 line
2.30.2
author maintainer
#8 lore raw

PATCH 9/21 gfs2: Fix use-after-free in gfs2_glock_shrink_scan

In reply to Sasha Levin

From: Hillf Danton <[email protected]>

[ Upstream commit 1ab19c5de4c537ec0d9b21020395a5b5a6c059b2 ]

The GLF_LRU flag is checked under lru_lock in gfs2_glock_remove_from_lru() to remove the glock from the lru list in __gfs2_glock_put().

On the shrink scan path, the same flag is cleared under lru_lock but because of cond_resched_lock(&lru_lock) in gfs2_dispose_glock_lru(), progress on the put side can be made without deleting the glock from the lru list.

Keep GLF_LRU across the race window opened by cond_resched_lock(&lru_lock) to ensure correct behavior on both sides - clear GLF_LRU after list_del under lru_lock.

---
 fs/gfs2/glock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/gfs2/glock.c +1 -1
index c20d71d86812..14d11ccda868 100644
@@ -1457,6 +1457,7 @@ __acquires(&lru_lock)
 	while(!list_empty(list)) {
 		gl = list_entry(list->next, struct gfs2_glock, gl_lru);
 		list_del_init(&gl->gl_lru);
+		clear_bit(GLF_LRU, &gl->gl_flags);
 		if (!spin_trylock(&gl->gl_lockref.lock)) {
 add_back_to_lru:
 			list_add(&gl->gl_lru, &lru_list);
@@ -1502,7 +1503,6 @@ static long gfs2_scan_glock_lru(int nr)
 		if (!test_bit(GLF_LOCK, &gl->gl_flags)) {
 			list_move(&gl->gl_lru, &dispose);
 			atomic_dec(&lru_count);
-			clear_bit(GLF_LRU, &gl->gl_flags);
 			freed++;
 			continue;
 		}
Signature · 1 line
2.30.2
author maintainer
#18 lore raw

PATCH 19/21 net/x25: Return the correct errno code

In reply to Sasha Levin

From: Zheng Yongjun <[email protected]>

[ Upstream commit d7736958668c4facc15f421e622ffd718f5be80a ]

When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF.

---
 net/x25/af_x25.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/x25/af_x25.c +1 -1
index f43d037ea852..f87002792836 100644
@@ -551,7 +551,7 @@ static int x25_create(struct net *net, struct socket *sock, int protocol,
 	if (protocol)
 		goto out;
 
-	rc = -ENOBUFS;
+	rc = -ENOMEM;
 	if ((sk = x25_alloc_socket(net, kern)) == NULL)
 		goto out;
 
Signature · 1 line
2.30.2

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/21 net: ieee802154: fix null deref in parse dev addr

From: Dan Robertson <[email protected]>

[ Upstream commit 9fdd04918a452980631ecc499317881c1d120b70 ]

Fix a logic error that could result in a null deref if the user sets the mode incorrectly for the given addr type.

---
 net/ieee802154/nl802154.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
net/ieee802154/nl802154.c +5 -4
index b1c55db73764..6d4c71a52b6b 100644
@@ -1315,19 +1315,20 @@ ieee802154_llsec_parse_dev_addr(struct nlattr *nla,
 				     nl802154_dev_addr_policy, NULL))
 		return -EINVAL;
 
-	if (!attrs[NL802154_DEV_ADDR_ATTR_PAN_ID] ||
-	    !attrs[NL802154_DEV_ADDR_ATTR_MODE] ||
-	    !(attrs[NL802154_DEV_ADDR_ATTR_SHORT] ||
-	      attrs[NL802154_DEV_ADDR_ATTR_EXTENDED]))
+	if (!attrs[NL802154_DEV_ADDR_ATTR_PAN_ID] || !attrs[NL802154_DEV_ADDR_ATTR_MODE])
 		return -EINVAL;
 
 	addr->pan_id = nla_get_le16(attrs[NL802154_DEV_ADDR_ATTR_PAN_ID]);
 	addr->mode = nla_get_u32(attrs[NL802154_DEV_ADDR_ATTR_MODE]);
 	switch (addr->mode) {
 	case NL802154_DEV_ADDR_SHORT:
+		if (!attrs[NL802154_DEV_ADDR_ATTR_SHORT])
+			return -EINVAL;
 		addr->short_addr = nla_get_le16(attrs[NL802154_DEV_ADDR_ATTR_SHORT]);
 		break;
 	case NL802154_DEV_ADDR_EXTENDED:
+		if (!attrs[NL802154_DEV_ADDR_ATTR_EXTENDED])
+			return -EINVAL;
 		addr->extended_addr = nla_get_le64(attrs[NL802154_DEV_ADDR_ATTR_EXTENDED]);
 		break;
 	default:
Signature · 1 line
2.30.2
author maintainer
#1 lore raw

PATCH 2/21 HID: quirks: Set INCREMENT_USAGE_ON_DUPLICATE for Saitek X65

From: Nirenjan Krishnan <[email protected]>

[ Upstream commit 25bdbfbb2d8331a67824dd03d0087e9c98835f3a ]

The Saitek X65 joystick has a pair of axes that were used as mouse pointer controls by the Windows driver. The corresponding usage page is the Game Controls page, which is not recognized by the generic HID driver, and therefore, both axes get mapped to ABS_MISC. The quirk makes the second axis get mapped to ABS_MISC+1, and therefore made available separately.

---
 drivers/hid/hid-ids.h    | 1 +
 drivers/hid/hid-quirks.c | 1 +
 2 files changed, 2 insertions(+)
drivers/hid/hid-ids.h +1 -0
index 75342f3dfb86..ee5dce862a21 100644
@@ -999,6 +999,7 @@
 #define USB_DEVICE_ID_SAITEK_X52	0x075c
 #define USB_DEVICE_ID_SAITEK_X52_2	0x0255
 #define USB_DEVICE_ID_SAITEK_X52_PRO	0x0762
+#define USB_DEVICE_ID_SAITEK_X65	0x0b6a
 
 #define USB_VENDOR_ID_SAMSUNG		0x0419
 #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE	0x0001
drivers/hid/hid-quirks.c +1 -0
index 8fbe7b9cd84a..48e9761d4ace 100644
@@ -155,6 +155,7 @@ static const struct hid_device_id hid_quirks[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_X52), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_X52_2), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_X52_PRO), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_X65), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SEMICO, USB_DEVICE_ID_SEMICO_USB_KEYKOARD2), HID_QUIRK_NO_INIT_REPORTS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SEMICO, USB_DEVICE_ID_SEMICO_USB_KEYKOARD), HID_QUIRK_NO_INIT_REPORTS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SENNHEISER, USB_DEVICE_ID_SENNHEISER_BTD500USB), HID_QUIRK_NOGET },
Signature · 1 line
2.30.2
author maintainer
#2 lore raw

PATCH 3/21 HID: hid-sensor-hub: Return error for hid_set_field() failure

In reply to Sasha Levin

From: Srinivas Pandruvada <[email protected]>

[ Upstream commit edb032033da0dc850f6e7740fa1023c73195bc89 ]

In the function sensor_hub_set_feature(), return error when hid_set_field() fails.

---
 drivers/hid/hid-sensor-hub.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/hid/hid-sensor-hub.c +9 -4
index 21fbdcde1faa..ef62f36ebcf9 100644
@@ -223,16 +223,21 @@ int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
 	buffer_size = buffer_size / sizeof(__s32);
 	if (buffer_size) {
 		for (i = 0; i < buffer_size; ++i) {
-			hid_set_field(report->field[field_index], i,
-				      (__force __s32)cpu_to_le32(*buf32));
+			ret = hid_set_field(report->field[field_index], i,
+					    (__force __s32)cpu_to_le32(*buf32));
+			if (ret)
+				goto done_proc;
+
 			++buf32;
 		}
 	}
 	if (remaining_bytes) {
 		value = 0;
 		memcpy(&value, (u8 *)buf32, remaining_bytes);
-		hid_set_field(report->field[field_index], i,
-			      (__force __s32)cpu_to_le32(value));
+		ret = hid_set_field(report->field[field_index], i,
+				    (__force __s32)cpu_to_le32(value));
+		if (ret)
+			goto done_proc;
 	}
 	hid_hw_request(hsdev->hdev, report, HID_REQ_SET_REPORT);
 	hid_hw_wait(hsdev->hdev);
Signature · 1 line
2.30.2
author maintainer
#3 lore raw

PATCH 4/21 HID: Add BUS_VIRTUAL to hid_connect logging

In reply to Sasha Levin

From: Mark Bolhuis <[email protected]>

[ Upstream commit 48e33befe61a7d407753c53d1a06fc8d6b5dab80 ]

Add BUS_VIRTUAL to hid_connect logging since it's a valid hid bus type and it should not print <UNKNOWN>

---
 drivers/hid/hid-core.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/hid/hid-core.c +3 -0
index 9b66eb1d42c2..acbbc21e6233 100644
@@ -1823,6 +1823,9 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask)
 	case BUS_I2C:
 		bus = "I2C";
 		break;
+	case BUS_VIRTUAL:
+		bus = "VIRTUAL";
+		break;
 	default:
 		bus = "<UNKNOWN>";
 	}
Signature · 1 line
2.30.2
author maintainer
#4 lore raw

PATCH 5/21 HID: usbhid: fix info leak in hid_submit_ctrl

In reply to Sasha Levin

From: Anirudh Rayabharam <[email protected]>

[ Upstream commit 6be388f4a35d2ce5ef7dbf635a8964a5da7f799f ]

In hid_submit_ctrl(), the way of calculating the report length doesn't take into account that report->size can be zero. When running the syzkaller reproducer, a report of size 0 causes hid_submit_ctrl) to calculate transfer_buffer_length as 16384. When this urb is passed to the usb core layer, KMSAN reports an info leak of 16384 bytes.

To fix this, first modify hid_report_len() to account for the zero report size case by using DIV_ROUND_UP for the division. Then, call it from hid_submit_ctrl().

---
 drivers/hid/usbhid/hid-core.c | 2 +-
 include/linux/hid.h           | 3 +--
 2 files changed, 2 insertions(+), 3 deletions(-)
drivers/hid/usbhid/hid-core.c +1 -1
index 1e6f8b0d00fb..6b6db57b49d6 100644
@@ -377,7 +377,7 @@ static int hid_submit_ctrl(struct hid_device *hid)
 	raw_report = usbhid->ctrl[usbhid->ctrltail].raw_report;
 	dir = usbhid->ctrl[usbhid->ctrltail].dir;
 
-	len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
+	len = hid_report_len(report);
 	if (dir == USB_DIR_OUT) {
 		usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0);
 		usbhid->urbctrl->transfer_buffer_length = len;
include/linux/hid.h +1 -2
index 4dcce83ca378..c833948aade0 100644
@@ -1151,8 +1151,7 @@ static inline void hid_hw_wait(struct hid_device *hdev)
  */
 static inline u32 hid_report_len(struct hid_report *report)
 {
-	/* equivalent to DIV_ROUND_UP(report->size, 8) + !!(report->id > 0) */
-	return ((report->size - 1) >> 3) + 1 + (report->id > 0);
+	return DIV_ROUND_UP(report->size, 8) + (report->id > 0);
 }
 
 int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, u32 size,
Signature · 1 line
2.30.2
author maintainer
#5 lore raw

PATCH 6/21 ARM: OMAP2+: Fix build warning when mmc_omap is not built

In reply to Sasha Levin

From: Yongqiang Liu <[email protected]>

[ Upstream commit 040ab72ee10ea88e1883ad143b3e2b77596abc31 ]

GCC reports the following warning with W=1:

arch/arm/mach-omap2/board-n8x0.c:325:19: warning:
variable 'index' set but not used [-Wunused-but-set-variable] 325 | int bit, *openp, index;
| ^~~~~

Fix this by moving CONFIG_MMC_OMAP to cover the rest codes in the n8x0_mmc_callback().

---
 arch/arm/mach-omap2/board-n8x0.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-omap2/board-n8x0.c +1 -1
index 75bc18646df6..902e9df9b8bb 100644
@@ -325,6 +325,7 @@ static int n8x0_mmc_get_cover_state(struct device *dev, int slot)
 
 static void n8x0_mmc_callback(void *data, u8 card_mask)
 {
+#ifdef CONFIG_MMC_OMAP
 	int bit, *openp, index;
 
 	if (board_is_n800()) {
@@ -342,7 +343,6 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
 	else
 		*openp = 0;
 
-#ifdef CONFIG_MMC_OMAP
 	omap_mmc_notify_cover_event(mmc_device, index, *openp);
 #else
 	pr_warn("MMC: notify cover event not available\n");
Signature · 1 line
2.30.2
author maintainer
#7 lore raw

PATCH 8/21 HID: gt683r: add missing MODULE_DEVICE_TABLE

In reply to Sasha Levin

From: Bixuan Cui <[email protected]>

[ Upstream commit a4b494099ad657f1cb85436d333cf38870ee95bc ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module.

---
 drivers/hid/hid-gt683r.c | 1 +
 1 file changed, 1 insertion(+)
drivers/hid/hid-gt683r.c +1 -0
index a298fbd8db6b..8ca4c1baeda8 100644
@@ -64,6 +64,7 @@ static const struct hid_device_id gt683r_led_id[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL) },
 	{ }
 };
+MODULE_DEVICE_TABLE(hid, gt683r_led_id);
 
 static void gt683r_brightness_set(struct led_classdev *led_cdev,
 				enum led_brightness brightness)
Signature · 1 line
2.30.2
author maintainer
#9 lore raw

PATCH 10/21 Bluetooth: use correct lock to prevent UAF of hdev object

In reply to Sasha Levin

From: Lin Ma <[email protected]>

[ Upstream commit e305509e678b3a4af2b3cfd410f409f7cdaabb52 ]

The hci_sock_dev_event() function will cleanup the hdev object for sockets even if this object may still be in used within the hci_sock_bound_ioctl() function, result in UAF vulnerability.

This patch replace the BH context lock to serialize these affairs and prevent the race condition.

---
 net/bluetooth/hci_sock.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/bluetooth/hci_sock.c +2 -2
index e506c51ff765..06156de24c50 100644
@@ -755,7 +755,7 @@ void hci_sock_dev_event(struct hci_dev *hdev, int event)
 		/* Detach sockets from device */
 		read_lock(&hci_sk_list.lock);
 		sk_for_each(sk, &hci_sk_list.head) {
-			bh_lock_sock_nested(sk);
+			lock_sock(sk);
 			if (hci_pi(sk)->hdev == hdev) {
 				hci_pi(sk)->hdev = NULL;
 				sk->sk_err = EPIPE;
@@ -764,7 +764,7 @@ void hci_sock_dev_event(struct hci_dev *hdev, int event)
 
 				hci_dev_put(hdev);
 			}
-			bh_unlock_sock(sk);
+			release_sock(sk);
 		}
 		read_unlock(&hci_sk_list.lock);
 	}
Signature · 1 line
2.30.2
author maintainer
#10 lore raw

PATCH 11/21 scsi: target: core: Fix warning on realtime kernels

In reply to Sasha Levin

From: Maurizio Lombardi <[email protected]>

[ Upstream commit 515da6f4295c2c42b8c54572cce3d2dd1167c41e ]

On realtime kernels, spin_lock_irq*(spinlock_t) do not disable the interrupts, a call to irqs_disabled() will return false thus firing a warning in __transport_wait_for_tasks().

Remove the warning and also replace assert_spin_locked() with lockdep_assert_held()

---
 drivers/target/target_core_transport.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/target/target_core_transport.c +1 -3
index bdada97cd4fe..9c60a090cfd1 100644
@@ -2982,9 +2982,7 @@ __transport_wait_for_tasks(struct se_cmd *cmd, bool fabric_stop,
 	__releases(&cmd->t_state_lock)
 	__acquires(&cmd->t_state_lock)
 {
-
-	assert_spin_locked(&cmd->t_state_lock);
-	WARN_ON_ONCE(!irqs_disabled());
+	lockdep_assert_held(&cmd->t_state_lock);
 
 	if (fabric_stop)
 		cmd->transport_state |= CMD_T_FABRIC_STOP;
Signature · 1 line
2.30.2
author maintainer
#12 lore raw

PATCH 13/21 scsi: scsi_devinfo: Add blacklist entry for HPE OPEN-V

In reply to Sasha Levin

From: "Ewan D. Milne" <[email protected]>

[ Upstream commit e57f5cd99ca60cddf40201b0f4ced9f1938e299c ]

Apparently some arrays are now returning "HPE" as the vendor.

---
 drivers/scsi/scsi_devinfo.c | 1 +
 1 file changed, 1 insertion(+)
drivers/scsi/scsi_devinfo.c +1 -0
index a08ff3bd6310..6a2a413cc97e 100644
@@ -184,6 +184,7 @@ static struct {
 	{"HP", "C3323-300", "4269", BLIST_NOTQ},
 	{"HP", "C5713A", NULL, BLIST_NOREPORTLUN},
 	{"HP", "DISK-SUBSYSTEM", "*", BLIST_REPORTLUN2},
+	{"HPE", "OPEN-", "*", BLIST_REPORTLUN2 | BLIST_TRY_VPD_PAGES},
 	{"IBM", "AuSaV1S2", NULL, BLIST_FORCELUN},
 	{"IBM", "ProFibre 4000R", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
 	{"IBM", "2105", NULL, BLIST_RETRY_HWERROR},
Signature · 1 line
2.30.2
author maintainer
#11 lore raw

PATCH 12/21 ethernet: myri10ge: Fix missing error code in myri10ge_probe()

In reply to Sasha Levin

From: Jiapeng Chong <[email protected]>

[ Upstream commit f336d0b93ae978f12c5e27199f828da89b91e56a ]

The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'status'.

Eliminate the follow smatch warning:

drivers/net/ethernet/myricom/myri10ge/myri10ge.c:3818 myri10ge_probe()
warn: missing error code 'status'.

---
 drivers/net/ethernet/myricom/myri10ge/myri10ge.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/myricom/myri10ge/myri10ge.c +1 -0
index 6789eed78ff7..3bc570c46f81 100644
@@ -3853,6 +3853,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		dev_err(&pdev->dev,
 			"invalid sram_size %dB or board span %ldB\n",
 			mgp->sram_size, mgp->board_span);
+		status = -EINVAL;
 		goto abort_with_ioremap;
 	}
 	memcpy_fromio(mgp->eeprom_strings,
Signature · 1 line
2.30.2
author maintainer
#15 lore raw

PATCH 16/21 nvme-loop: check for NVME_LOOP_Q_LIVE in nvme_loop_destroy_admin_queue()

In reply to Sasha Levin

From: Hannes Reinecke <[email protected]>

[ Upstream commit 4237de2f73a669e4f89ac0aa2b44fb1a1d9ec583 ]

We need to check the NVME_LOOP_Q_LIVE flag in nvme_loop_destroy_admin_queue() to protect against duplicate invocations eg during concurrent reset and remove calls.

---
 drivers/nvme/target/loop.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/nvme/target/loop.c +2 -1
index dba0b0145f48..08b52f3ed0c3 100644
@@ -274,7 +274,8 @@ static const struct blk_mq_ops nvme_loop_admin_mq_ops = {
 
 static void nvme_loop_destroy_admin_queue(struct nvme_loop_ctrl *ctrl)
 {
-	clear_bit(NVME_LOOP_Q_LIVE, &ctrl->queues[0].flags);
+	if (!test_and_clear_bit(NVME_LOOP_Q_LIVE, &ctrl->queues[0].flags))
+		return;
 	nvmet_sq_destroy(&ctrl->queues[0].nvme_sq);
 	blk_cleanup_queue(ctrl->ctrl.admin_q);
 	blk_mq_free_tag_set(&ctrl->admin_tag_set);
Signature · 1 line
2.30.2
author maintainer
#14 lore raw

PATCH 15/21 nvme-loop: clear NVME_LOOP_Q_LIVE when nvme_loop_configure_admin_queue() fails

In reply to Sasha Levin

From: Hannes Reinecke <[email protected]>

[ Upstream commit 1c5f8e882a05de5c011e8c3fbeceb0d1c590eb53 ]

When the call to nvme_enable_ctrl() in nvme_loop_configure_admin_queue() fails the NVME_LOOP_Q_LIVE flag is not cleared.

---
 drivers/nvme/target/loop.c | 1 +
 1 file changed, 1 insertion(+)
drivers/nvme/target/loop.c +1 -0
index 7b6e44ed299a..dba0b0145f48 100644
@@ -418,6 +418,7 @@ static int nvme_loop_configure_admin_queue(struct nvme_loop_ctrl *ctrl)
 	return 0;
 
 out_cleanup_queue:
+	clear_bit(NVME_LOOP_Q_LIVE, &ctrl->queues[0].flags);
 	blk_cleanup_queue(ctrl->ctrl.admin_q);
 out_free_tagset:
 	blk_mq_free_tag_set(&ctrl->admin_tag_set);
Signature · 1 line
2.30.2
author maintainer
#13 lore raw

PATCH 14/21 nvme-loop: reset queue count to 1 in nvme_loop_destroy_io_queues()

In reply to Sasha Levin

From: Hannes Reinecke <[email protected]>

[ Upstream commit a6c144f3d2e230f2b3ac5ed8c51e0f0391556197 ]

The queue count is increased in nvme_loop_init_io_queues(), so we need to reset it to 1 at the end of nvme_loop_destroy_io_queues(). Otherwise the function is not re-entrant safe, and crash will happen during concurrent reset and remove calls.

---
 drivers/nvme/target/loop.c | 1 +
 1 file changed, 1 insertion(+)
drivers/nvme/target/loop.c +1 -0
index 137a27fa369c..7b6e44ed299a 100644
@@ -309,6 +309,7 @@ static void nvme_loop_destroy_io_queues(struct nvme_loop_ctrl *ctrl)
 		clear_bit(NVME_LOOP_Q_LIVE, &ctrl->queues[i].flags);
 		nvmet_sq_destroy(&ctrl->queues[i].nvme_sq);
 	}
+	ctrl->ctrl.queue_count = 1;
 }
 
 static int nvme_loop_init_io_queues(struct nvme_loop_ctrl *ctrl)
Signature · 1 line
2.30.2
author maintainer
#16 lore raw

PATCH 17/21 net: ipconfig: Don't override command-line hostnames or domains

In reply to Sasha Levin

From: Josh Triplett <[email protected]>

[ Upstream commit b508d5fb69c2211a1b860fc058aafbefc3b3c3cd ]

If the user specifies a hostname or domain name as part of the ip= command-line option, preserve it and don't overwrite it with one supplied by DHCP/BOOTP.

For instance, ip=::::myhostname::dhcp will use "myhostname" rather than ignoring and overwriting it.

Fix the comment on ic_bootp_string that suggests it only copies a string "if not already set"; it doesn't have any such logic.

---
 net/ipv4/ipconfig.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
net/ipv4/ipconfig.c +8 -5
index 88212615bf4c..58719b9635d9 100644
@@ -866,7 +866,7 @@ static void __init ic_bootp_send_if(struct ic_device *d, unsigned long jiffies_d
 
 
 /*
- *  Copy BOOTP-supplied string if not already set.
+ *  Copy BOOTP-supplied string
  */
 static int __init ic_bootp_string(char *dest, char *src, int len, int max)
 {
@@ -915,12 +915,15 @@ static void __init ic_do_bootp_ext(u8 *ext)
 		}
 		break;
 	case 12:	/* Host name */
-		ic_bootp_string(utsname()->nodename, ext+1, *ext,
-				__NEW_UTS_LEN);
-		ic_host_name_set = 1;
+		if (!ic_host_name_set) {
+			ic_bootp_string(utsname()->nodename, ext+1, *ext,
+					__NEW_UTS_LEN);
+			ic_host_name_set = 1;
+		}
 		break;
 	case 15:	/* Domain name (DNS) */
-		ic_bootp_string(ic_domain, ext+1, *ext, sizeof(ic_domain));
+		if (!ic_domain[0])
+			ic_bootp_string(ic_domain, ext+1, *ext, sizeof(ic_domain));
 		break;
 	case 17:	/* Root path */
 		if (!root_server_path[0])
Signature · 1 line
2.30.2
author maintainer
#17 lore raw

PATCH 18/21 rtnetlink: Fix missing error code in rtnl_bridge_notify()

In reply to Sasha Levin

From: Jiapeng Chong <[email protected]>

[ Upstream commit a8db57c1d285c758adc7fb43d6e2bad2554106e1 ]

The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'err'.

Eliminate the follow smatch warning:

net/core/rtnetlink.c:4834 rtnl_bridge_notify() warn: missing error code 'err'.

---
 net/core/rtnetlink.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
net/core/rtnetlink.c +3 -1
index 935053ee7765..7f2dda27f9e7 100644
@@ -4102,8 +4102,10 @@ static int rtnl_bridge_notify(struct net_device *dev)
 	if (err < 0)
 		goto errout;
 
-	if (!skb->len)
+	if (!skb->len) {
+		err = -EINVAL;
 		goto errout;
+	}
 
 	rtnl_notify(skb, net, 0, RTNLGRP_LINK, NULL, GFP_ATOMIC);
 	return 0;
Signature · 1 line
2.30.2
author maintainer
#19 lore raw

PATCH 20/21 net: Return the correct errno code

In reply to Sasha Levin

From: Zheng Yongjun <[email protected]>

[ Upstream commit 49251cd00228a3c983651f6bb2f33f6a0b8f152e ]

When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF.

---
 net/compat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/compat.c +1 -1
index 2a8c7cb5f06a..2778a236e091 100644
@@ -158,7 +158,7 @@ int cmsghdr_from_user_compat_to_kern(struct msghdr *kmsg, struct sock *sk,
 	if (kcmlen > stackbuf_size)
 		kcmsg_base = kcmsg = sock_kmalloc(sk, kcmlen, GFP_KERNEL);
 	if (kcmsg == NULL)
-		return -ENOBUFS;
+		return -ENOMEM;
 
 	/* Now copy them over neatly. */
 	memset(kcmsg, 0, kcmlen);
Signature · 1 line
2.30.2
author maintainer
#20 lore raw

PATCH 21/21 fib: Return the correct errno code

In reply to Sasha Levin

From: Zheng Yongjun <[email protected]>

[ Upstream commit 59607863c54e9eb3f69afc5257dfe71c38bb751e ]

When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF.

---
 net/core/fib_rules.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/core/fib_rules.c +1 -1
index 8916c5d9b3b3..46a13ed15c4e 100644
@@ -1105,7 +1105,7 @@ static void notify_rule_change(int event, struct fib_rule *rule,
 {
 	struct net *net;
 	struct sk_buff *skb;
-	int err = -ENOBUFS;
+	int err = -ENOMEM;
 
 	net = ops->fro_net;
 	skb = nlmsg_new(fib_rule_nlmsg_size(ops, rule), GFP_KERNEL);
Signature · 1 line
2.30.2