ARM: dts: aspeed: Everest PSU #3 address change
Subsystems (2)
PATCH 1/1 ARM: dts: aspeed: Everest PSU #3 address change
From: "B. J. Wyman" <[email protected]>
The third power supply had an I2C address conflict with another device in the system. The device will have the address changed from 6Ah to 6Dh.
--- arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts +2 -2
@@ -536,9 +536,9 @@ power-supply at 69 { reg = <0x69>; }; - power-supply at 6a { + power-supply at 6d { compatible = "ibm,cffps"; - reg = <0x6a>; + reg = <0x6d>; }; power-supply at 6b {
Signature · 1 line
2.25.1
PATCH 1/1 ARM: dts: aspeed: Everest PSU #3 address change
Quoted 6 lines · Brandon Wyman
From: "B. J. Wyman" <[email protected]>
The third power supply had an I2C address conflict with another device
in the system. The device will have the address changed from 6Ah to 6Dh.
Thanks Brandon.
Quoted 23 lines
Signed-off-by B. J. Wyman <[email protected]>--- arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts +2
-2@@ -536,9 +536,9 @@ power-supply at 69 { reg = <0x69>; }; - power-supply at 6a { + power-supply at 6d { compatible = "ibm,cffps"; - reg = <0x6a>; + reg = <0x6d>; }; power-supply at 6b {
PATCH 1/1 ARM: dts: aspeed: Everest PSU #3 address change
Quoted 4 lines · Eddie James
Quoted 2 lines · Brandon Wyman
From: "B. J. Wyman" <[email protected]>
Quoted 8 lines
Quoted 4 lines
The third power supply had an I2C address conflict with another device
in the system. The device will have the address changed from 6Ah to 6Dh.Thanks Brandon.
Reviewed-by Eddie James <[email protected]>
I've applied this to dev-5.10.
I'll try to remember to get the change upstream too.
Quoted 25 lines
Quoted 24 lines
Signed-off-by B. J. Wyman <[email protected]>--- arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts +2
-2@@ -536,9 +536,9 @@ power-supply at 69 { reg = <0x69>; }; - power-supply at 6a { + power-supply at 6d { compatible = "ibm,cffps"; - reg = <0x6a>; + reg = <0x6d>; }; power-supply at 6b {