Skip to contentSkip to conversation

5.10.44-rc2 review

PATCH In review Greg Kroah-Hartman 11 participants 15 messages Jun 14, 2021 – Jun 15, 2021

Subsystems (3)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 5.10.44-rc2 review

This is the start of the stable review cycle for the 5.10.44 release. There are 130 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 16 Jun 2021 16:13:59 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.44-rc2.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.10.44-rc2

Liangyan <[email protected]>
tracing: Correct the length check which causes memory corruption

Ming Lei <[email protected]>
scsi: core: Only put parent device if host state differs from SHOST_CREATED

Ming Lei <[email protected]>
scsi: core: Put .shost_dev in failure path if host state changes to RUNNING

Ming Lei <[email protected]>
scsi: core: Fix failure handling of scsi_add_host_with_dma()

Ming Lei <[email protected]>
scsi: core: Fix error handling of scsi_host_alloc()

Dai Ngo <[email protected]>
NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error.

Trond Myklebust <[email protected]>
NFSv4: Fix second deadlock in nfs4_evict_inode()

Anna Schumaker <[email protected]>
NFS: Fix use-after-free in nfs4_init_client()

Paolo Bonzini <[email protected]>
kvm: fix previous commit for 32-bit builds

Leo Yan <[email protected]>
perf session: Correct buffer copying when peeking events

Trond Myklebust <[email protected]>
NFSv4: Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode()

Dan Carpenter <[email protected]>
NFS: Fix a potential NULL dereference in nfs_get_client()

Alaa Hleihel <[email protected]>
IB/mlx5: Fix initializing CQ fragments buffer

Sean Christopherson <[email protected]>
KVM: x86: Ensure liveliness of nested VM-Enter fail tracepoint message

CodyYao-oc <[email protected]>
x86/nmi_watchdog: Fix old-style NMI watchdog regression on old Intel CPUs

Dietmar Eggemann <[email protected]>
sched/fair: Fix util_est UTIL_AVG_UNCHANGED handling

Vincent Guittot <[email protected]>
sched/fair: Make sure to update tg contrib for blocked load

Vincent Guittot <[email protected]>
sched/fair: Keep load_avg and load_sum synced

Marco Elver <[email protected]>
perf: Fix data race between pin_count increment/decrement

Srinivas Kandagatla <[email protected]>
gpio: wcd934x: Fix shift-out-of-bounds error

Yang Li <[email protected]>
phy: ti: Fix an error code in wiz_probe()

Jerome Brunet <[email protected]>
ASoC: meson: gx-card: fix sound-dai dt schema

Kefeng Wang <[email protected]>
ASoC: core: Fix Null-point-dereference in fmt_single_name()

Wang Wensheng <[email protected]>
phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe()

Zhen Lei <[email protected]>
tools/bootconfig: Fix error return code in apply_xbc()

Nathan Chancellor <[email protected]>
vmlinux.lds.h: Avoid orphan section with !SMP

Arnd Bergmann <[email protected]>
ARM: cpuidle: Avoid orphan section warning

Shay Drory <[email protected]>
RDMA/mlx4: Do not map the core_clock page to user space unless enabled

Kamal Heib <[email protected]>
RDMA/ipoib: Fix warning caused by destroying non-initial netns

Jonathan Marek <[email protected]>
drm/msm/a6xx: avoid shadow NULL reference in failure path

Jonathan Marek <[email protected]>
drm/msm/a6xx: update/fix CP_PROTECT initialization

Jonathan Marek <[email protected]>
drm/msm/a6xx: fix incorrectly set uavflagprd_inv field for A650

Linus Walleij <[email protected]>
drm/mcde: Fix off by 10^3 in calculation

Bjorn Andersson <[email protected]>
usb: typec: mux: Fix copy-paste mistake in typec_mux_match

Wesley Cheng <[email protected]>
usb: dwc3: gadget: Disable gadget IRQ during pullup disable

Chen Li <[email protected]>
phy: usb: Fix misuse of IS_ENABLED

Axel Lin <[email protected]>
regulator: rtmv20: Fix .set_current_limit/.get_current_limit callbacks

Axel Lin <[email protected]>
regulator: bd71828: Fix .n_voltages settings

Axel Lin <[email protected]>
regulator: fan53880: Fix missing n_voltages setting

Matti Vaittinen <[email protected]>
regulator: bd718x7: Fix the BUCK7 voltage setting on BD71837

Dmitry Osipenko <[email protected]>

    regulator: max77620: Use device_set_of_node_from_dev()

Dmitry Baryshkov <[email protected]>
regulator: core: resolve supply for boot-on/always-on regulators

Li Jun <[email protected]>
usb: typec: tcpm: cancel frs hrtimer when unregister tcpm port

Li Jun <[email protected]>
usb: typec: tcpm: cancel vdm and state machine hrtimer when unregister tcpm port

Maciej Żenczykowski <[email protected]>
usb: fix various gadget panics on 10gbps cabling

Maciej Żenczykowski <[email protected]>
usb: fix various gadgets null ptr deref on 10gbps cabling.

Linyu Yuan <[email protected]>
usb: gadget: eem: fix wrong eem header operation

Stefan Agner <[email protected]>

    USB: serial: cp210x: fix alternate function for CP2102N QFN20

Johan Hovold <[email protected]>
USB: serial: quatech2: fix control-request directions

Alexandre GRIVEAUX <[email protected]>
USB: serial: omninet: add device id for Zyxel Omni 56K Plus

George McCollister <[email protected]>
USB: serial: ftdi_sio: add NovaTech OrionMX product ID

Wesley Cheng <[email protected]>
usb: gadget: f_fs: Ensure io_completion_wq is idle during unbind

Andy Shevchenko <[email protected]>
usb: typec: intel_pmc_mux: Add missed error check for devm_ioremap_resource()

Andy Shevchenko <[email protected]>

    usb: typec: intel_pmc_mux: Put fwnode in error case during ->probe()

Mayank Rana <[email protected]>
usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path

Andy Shevchenko <[email protected]>

    usb: typec: wcove: Use LE to CPU conversion when accessing msg->header

Thomas Petazzoni <[email protected]>
usb: musb: fix MUSB_QUIRK_B_DISCONNECT_99 handling

Marian-Cristian Rotariu <[email protected]>
usb: dwc3: ep0: fix NULL pointer exception

Jack Pham <[email protected]>
usb: dwc3: debugfs: Add and remove endpoint dirs dynamically

Jack Pham <[email protected]>

    usb: dwc3: gadget: Bail from dwc3_gadget_exit() if dwc->gadget is NULL

Christophe JAILLET <[email protected]>
usb: dwc3: meson-g12a: Disable the regulator in the error handling path of the probe

Neil Armstrong <[email protected]>
usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled

Kyle Tso <[email protected]>
usb: pd: Set PD_T_SINK_WAIT_CAP to 310ms

Maciej Żenczykowski <[email protected]>
usb: f_ncm: only first packet of aggregate needs to start timer

Maciej Żenczykowski <[email protected]>
USB: f_ncm: ncm_bitrate (speed) is unsigned

Geert Uytterhoeven <[email protected]>
mmc: renesas_sdhi: Fix HS400 on R-Car M3-W+

Wolfram Sang <[email protected]>
mmc: renesas_sdhi: abort tuning when timeout detected

Steven Rostedt (VMware) <[email protected]>
ftrace: Do not blindly read the ip address in ftrace_bug()

Alexander Kuznetsov <[email protected]>
cgroup1: don't allow '\n' in renaming

Nikolay Borisov <[email protected]>
btrfs: promote debugging asserts to full-fledged checks in validate_super

Ritesh Harjani <[email protected]>
btrfs: return value from btrfs_mark_extent_written() in case of error

Xiao Ni <[email protected]>
async_xor: check src_offs is not NULL before updating it

Wenli Looi <[email protected]>
staging: rtl8723bs: Fix uninitialized variables

Paolo Bonzini <[email protected]>
kvm: avoid speculation-based attacks from out-of-range memslot accesses

Lai Jiangshan <[email protected]>
KVM: X86: MMU: Use the correct inherited permissions to get shadow page

Kan Liang <[email protected]>
perf/x86/intel/uncore: Fix M2M event umask for Ice Lake server

Desmond Cheong Zhi Xi <[email protected]>
drm: Lock pointer access in drm_master_release()

Desmond Cheong Zhi Xi <[email protected]>
drm: Fix use-after-free read in drm_getunique()

Zhang Rui <[email protected]>
Revert "ACPI: sleep: Put the FACS table after using it"

Lukas Wunner <[email protected]>
spi: bcm2835: Fix out-of-bounds access with more than 4 slaves

Jeremy Szu <[email protected]>
ALSA: hda/realtek: fix mute/micmute LEDs for HP ZBook Power G8

Jeremy Szu <[email protected]>
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 840 Aero G8

Jeremy Szu <[email protected]>
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP EliteBook x360 1040 G8

Jeremy Szu <[email protected]>
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Elite Dragonfly G2

Hui Wang <[email protected]>
ALSA: hda/realtek: headphone and mic don't work on an Acer laptop

Takashi Sakamoto <[email protected]>
ALSA: firewire-lib: fix the context to call snd_pcm_stop_xrun()

Takashi Iwai <[email protected]>
ALSA: seq: Fix race of snd_seq_timer_open()

Chris Packham <[email protected]>
i2c: mpc: implement erratum A-004447 workaround

Chris Packham <[email protected]>
i2c: mpc: Make use of i2c_recover_bus()

Lukas Wunner <[email protected]>
spi: Cleanup on failure of initial setup

Saravana Kannan <[email protected]>
spi: Don't have controller clean up spi device before driver unbind

Chris Packham <[email protected]>
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers

Chris Packham <[email protected]>
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers

Sagi Grimberg <[email protected]>
nvmet: fix false keep-alive timeout when a controller is torn down

Sagi Grimberg <[email protected]>
nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME

Jiapeng Chong <[email protected]>
bnx2x: Fix missing error code in bnx2x_iov_init_one()

John Keeping <[email protected]>
dm verity: fix require_signatures module_param permissions

Tiezhu Yang <[email protected]>
MIPS: Fix kernel hang under FUNCTION_GRAPH_TRACER and PREEMPT_TRACER

Hannes Reinecke <[email protected]>
nvme-fabrics: decode host pathing error for connect

George McCollister <[email protected]>
net: dsa: microchip: enable phy errata workaround on 9567

Saubhik Mukherjee <[email protected]>
net: appletalk: cops: Fix data race in cops_probe1

Zong Li <[email protected]>
net: macb: ensure the device is available before accessing GEMGXL control registers

Dmitry Bogdanov <[email protected]>
scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal

Yang Yingliang <[email protected]>
scsi: hisi_sas: Drop free_irq() of devm_request_irq() allocated irq

Matt Wang <[email protected]>
scsi: vmw_pvscsi: Set correct residual data length

Javed Hasan <[email protected]>
scsi: bnx2fc: Return failure if io_req is already in ABTS processing

Íñigo Huguet <[email protected]>
net:sfc: fix non-freed irq in legacy irq mode

Rao Shoaib <[email protected]>
RDS tcp loopback connection can hang

Zheyu Ma <[email protected]>
net/qla3xxx: fix schedule while atomic in ql_sem_spinlock

Sergey Senozhatsky <[email protected]>
wq: handle VM suspension in stall detection

Shakeel Butt <[email protected]>
cgroup: disable controllers at parse time

Dan Carpenter <[email protected]>
net: mdiobus: get rid of a BUG_ON()

Johannes Berg <[email protected]>
netlink: disable IRQs for netlink_lock_table()

Johannes Berg <[email protected]>
bonding: init notify_work earlier to avoid uninitialized use

Zheyu Ma <[email protected]>
isdn: mISDN: netjet: Fix crash in nj_probe:

Li Jun <[email protected]>
usb: chipidea: udc: assign interrupt number to USB gadget structure

Chunyan Zhang <[email protected]>
spi: sprd: Add missing MODULE_DEVICE_TABLE

Zou Wei <[email protected]>
ASoC: sti-sas: add missing MODULE_DEVICE_TABLE

Eric Farman <[email protected]>
vfio-ccw: Serialize FSM IDLE state with I/O completion

Eric Farman <[email protected]>
vfio-ccw: Reset FSM state to IDLE inside FSM

Hans de Goede <[email protected]>
ASoC: Intel: bytcr_rt5640: Add quirk for the Lenovo Miix 3-830 tablet

Hans de Goede <[email protected]>
ASoC: Intel: bytcr_rt5640: Add quirk for the Glavey TM800A550L tablet

Dinghao Liu <[email protected]>
usb: cdns3: Fix runtime PM imbalance on error

Jeimon <[email protected]>
net/nfc/rawsock.c: fix a permission check bug

Jiri Olsa <[email protected]>
bpf: Forbid trampoline attach for functions with variable arguments

Karen Dombroski <[email protected]>
spi: spi-zynq-qspi: Fix stack violation bug

Saravana Kannan <[email protected]>
spi: Fix spi device unregister flow

Vijendar Mukunda <[email protected]>
ASoC: amd: fix for pcm_read() error

Marco Felsch <[email protected]>
ASoC: max98088: fix ni clock divider calculation

Kees Cook <[email protected]>
proc: Track /proc/$pid/attr/ opener mm_struct

-------------

Diffstat:

 .../bindings/sound/amlogic,gx-sound-card.yaml      |   4 +-
 Documentation/virt/kvm/mmu.rst                     |   4 +-
 Makefile                                           |   4 +-
 arch/arm/include/asm/cpuidle.h                     |   5 +-
 arch/mips/lib/mips-atomic.c                        |  12 +-
 arch/powerpc/boot/dts/fsl/p1010si-post.dtsi        |   8 ++
 arch/powerpc/boot/dts/fsl/p2041si-post.dtsi        |  16 +++
 arch/x86/events/intel/uncore_snbep.c               |   3 +-
 arch/x86/kernel/cpu/perfctr-watchdog.c             |   4 +-
 arch/x86/kvm/mmu/paging_tmpl.h                     |  14 +-
 arch/x86/kvm/trace.h                               |   6 +-
 crypto/async_tx/async_xor.c                        |   3 +-
 drivers/acpi/sleep.c                               |   4 +-
 drivers/gpio/gpio-wcd934x.c                        |   2 +-
 drivers/gpu/drm/drm_auth.c                         |   3 +-
 drivers/gpu/drm/drm_ioctl.c                        |   9 +-
 drivers/gpu/drm/mcde/mcde_dsi.c                    |   2 +-
 drivers/gpu/drm/msm/adreno/a6xx_gpu.c              | 155 +++++++++++++++------
 drivers/gpu/drm/msm/adreno/a6xx_gpu.h              |   2 +-
 drivers/i2c/busses/i2c-mpc.c                       |  95 ++++++++++++-
 drivers/infiniband/hw/mlx4/main.c                  |   5 +-
 drivers/infiniband/hw/mlx5/cq.c                    |   9 +-
 drivers/infiniband/ulp/ipoib/ipoib_netlink.c       |   1 +
 drivers/isdn/hardware/mISDN/netjet.c               |   1 -
 drivers/md/dm-verity-verify-sig.c                  |   2 +-
 drivers/mmc/host/renesas_sdhi_core.c               |   9 +-
 drivers/net/appletalk/cops.c                       |   4 +-
 drivers/net/bonding/bond_main.c                    |   2 +-
 drivers/net/dsa/microchip/ksz9477.c                |   1 +
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c  |   4 +-
 drivers/net/ethernet/cadence/macb_main.c           |   3 +
 drivers/net/ethernet/mellanox/mlx4/fw.c            |   3 +
 drivers/net/ethernet/mellanox/mlx4/fw.h            |   1 +
 drivers/net/ethernet/mellanox/mlx4/main.c          |   6 +
 drivers/net/ethernet/qlogic/qla3xxx.c              |   2 +-
 drivers/net/ethernet/sfc/nic.c                     |   1 +
 drivers/net/phy/mdio_bus.c                         |   3 +-
 drivers/nvme/host/Kconfig                          |   3 +-
 drivers/nvme/host/fabrics.c                        |   5 +
 drivers/nvme/target/core.c                         |  15 +-
 drivers/nvme/target/nvmet.h                        |   2 +-
 drivers/phy/broadcom/phy-brcm-usb-init.h           |   4 +-
 drivers/phy/cadence/phy-cadence-sierra.c           |   1 +
 drivers/phy/ti/phy-j721e-wiz.c                     |   1 +
 drivers/regulator/bd718x7-regulator.c              |   2 +-
 drivers/regulator/core.c                           |   6 +
 drivers/regulator/fan53880.c                       |   3 +
 drivers/regulator/max77620-regulator.c             |   7 +
 drivers/regulator/rtmv20-regulator.c               |  42 +++++-
 drivers/s390/cio/vfio_ccw_drv.c                    |  12 +-
 drivers/s390/cio/vfio_ccw_fsm.c                    |   1 +
 drivers/s390/cio/vfio_ccw_ops.c                    |   2 -
 drivers/scsi/bnx2fc/bnx2fc_io.c                    |   1 +
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c             |   8 +-
 drivers/scsi/hosts.c                               |  47 ++++---
 drivers/scsi/qla2xxx/qla_target.c                  |   2 +
 drivers/scsi/vmw_pvscsi.c                          |   8 +-
 drivers/spi/spi-bcm2835.c                          |  10 +-
 drivers/spi/spi-bitbang.c                          |  18 ++-
 drivers/spi/spi-fsl-spi.c                          |   4 +
 drivers/spi/spi-omap-uwire.c                       |   9 +-
 drivers/spi/spi-omap2-mcspi.c                      |  33 +++--
 drivers/spi/spi-pxa2xx.c                           |   9 +-
 drivers/spi/spi-sprd.c                             |   1 +
 drivers/spi/spi-zynq-qspi.c                        |   7 +-
 drivers/spi/spi.c                                  |  20 ++-
 drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c  |   2 +-
 drivers/usb/cdns3/gadget.c                         |   4 +-
 drivers/usb/chipidea/udc.c                         |   1 +
 drivers/usb/dwc3/debug.h                           |   3 +
 drivers/usb/dwc3/debugfs.c                         |  21 +--
 drivers/usb/dwc3/dwc3-meson-g12a.c                 |  13 +-
 drivers/usb/dwc3/ep0.c                             |   3 +
 drivers/usb/dwc3/gadget.c                          |  18 ++-
 drivers/usb/gadget/config.c                        |   8 ++
 drivers/usb/gadget/function/f_ecm.c                |   2 +-
 drivers/usb/gadget/function/f_eem.c                |   6 +-
 drivers/usb/gadget/function/f_fs.c                 |   3 +
 drivers/usb/gadget/function/f_hid.c                |   3 +-
 drivers/usb/gadget/function/f_loopback.c           |   2 +-
 drivers/usb/gadget/function/f_ncm.c                |  10 +-
 drivers/usb/gadget/function/f_printer.c            |   3 +-
 drivers/usb/gadget/function/f_rndis.c              |   2 +-
 drivers/usb/gadget/function/f_serial.c             |   2 +-
 drivers/usb/gadget/function/f_sourcesink.c         |   3 +-
 drivers/usb/gadget/function/f_subset.c             |   2 +-
 drivers/usb/gadget/function/f_tcm.c                |   3 +-
 drivers/usb/musb/musb_core.c                       |   3 +-
 drivers/usb/serial/cp210x.c                        |  20 ++-
 drivers/usb/serial/ftdi_sio.c                      |   1 +
 drivers/usb/serial/ftdi_sio_ids.h                  |   1 +
 drivers/usb/serial/omninet.c                       |   2 +
 drivers/usb/serial/quatech2.c                      |   6 +-
 drivers/usb/typec/mux.c                            |   2 +-
 drivers/usb/typec/mux/intel_pmc_mux.c              |   9 +-
 drivers/usb/typec/tcpm/tcpm.c                      |   4 +
 drivers/usb/typec/tcpm/wcove.c                     |   2 +-
 drivers/usb/typec/ucsi/ucsi.c                      |   1 +
 fs/btrfs/disk-io.c                                 |  26 ++--
 fs/btrfs/file.c                                    |   4 +-
 fs/nfs/client.c                                    |   2 +-
 fs/nfs/nfs4_fs.h                                   |   1 +
 fs/nfs/nfs4client.c                                |   2 +-
 fs/nfs/nfs4proc.c                                  |  29 +++-
 fs/proc/base.c                                     |   9 +-
 include/asm-generic/vmlinux.lds.h                  |   1 +
 include/linux/kvm_host.h                           |  10 +-
 include/linux/mfd/rohm-bd71828.h                   |  10 +-
 include/linux/mlx4/device.h                        |   1 +
 include/linux/sched.h                              |   8 ++
 include/linux/usb/pd.h                             |   2 +-
 kernel/bpf/btf.c                                   |  12 ++
 kernel/cgroup/cgroup-v1.c                          |   4 +
 kernel/cgroup/cgroup.c                             |  13 +-
 kernel/events/core.c                               |   2 +
 kernel/sched/debug.c                               |   3 +-
 kernel/sched/fair.c                                |  18 +--
 kernel/sched/pelt.h                                |  11 +-
 kernel/trace/ftrace.c                              |   8 +-
 kernel/trace/trace.c                               |   2 +-
 kernel/workqueue.c                                 |  12 +-
 net/netlink/af_netlink.c                           |   6 +-
 net/nfc/rawsock.c                                  |   2 +-
 net/rds/connection.c                               |  23 ++-
 net/rds/tcp.c                                      |   4 +-
 net/rds/tcp.h                                      |   3 +-
 net/rds/tcp_listen.c                               |   6 +
 sound/core/seq/seq_timer.c                         |  10 +-
 sound/firewire/amdtp-stream.c                      |   2 +-
 sound/pci/hda/patch_realtek.c                      |  16 +++
 sound/soc/amd/raven/acp3x-pcm-dma.c                |  10 --
 sound/soc/amd/raven/acp3x.h                        |   1 +
 sound/soc/amd/raven/pci-acp3x.c                    |  15 ++
 sound/soc/codecs/max98088.c                        |  13 +-
 sound/soc/codecs/sti-sas.c                         |   1 +
 sound/soc/intel/boards/bytcr_rt5640.c              |  25 ++++
 sound/soc/soc-core.c                               |   2 +
 tools/bootconfig/main.c                            |   1 +
 tools/perf/util/session.c                          |   1 +
 139 files changed, 882 insertions(+), 309 deletions(-)
maintainer Tested-by on the v1 series
#1 lore raw
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.44 release. There are 130 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 16 Jun 2021 16:13:59 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.44-rc2.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

All tests passing for Tegra ...

Test results for stable-v5.10:

    12 builds:	12 pass, 0 fail
    28 boots:	28 pass, 0 fail
    70 tests:	70 pass, 0 fail

Linux version: 5.10.44-rc2-g3f05ff8b3370
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Jon

Tested-by on the v1 series
#2 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.44 release. There are 130 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 16 Jun 2021 16:13:59 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.44-rc2.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

5.10.44-rc2 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)

Tested-by on the v1 series
#3 lore raw
In reply to Greg Kroah-Hartman

Hi!

Quoted 4 lines

This is the start of the stable review cycle for the 5.10.44 release. There are 130 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y

Best regards,
Pavel

Signature · 2 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Tested-by Tested-by on the v1 series
#4 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.44 release. There are 130 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 16 Jun 2021 16:13:59 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.44-rc2.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit kernels:

32-bit and 64-bit kernels:

Signature · 1 line
Florian
Tested-by on the v1 series
#5 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.44 release. There are 130 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 16 Jun 2021 16:13:59 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.44-rc2.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

#6 lore raw
In reply to Greg Kroah-Hartman

Hi Greg,

Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.44 release. There are 130 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 16 Jun 2021 16:13:59 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.44-rc2.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

The following kernel crash reported on stable rc 5.10.44-rc2 arm64 db845c board.

[    5.127966] dwc3-qcom a6f8800.usb: failed to get usb-ddr path: -517
[    5.145567] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000002
[    5.154451] Mem abort info:
[    5.157296]   ESR = 0x96000004
[    5.160401]   EC = 0x25: DABT (current EL), IL = 32 bits
[    5.165771]   SET = 0, FnV = 0
[    5.168873]   EA = 0, S1PTW = 0
[    5.172064] Data abort info:
[    5.174980]   ISV = 0, ISS = 0x00000004
[    5.178860]   CM = 0, WnR = 0
[    5.181872] [0000000000000002] user address but active_mm is swapper
[    5.188293] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    5.193922] Modules linked in:
[    5.197022] CPU: 4 PID: 57 Comm: kworker/4:3 Not tainted 5.10.44-rc2 #1
[    5.203697] Hardware name: Thundercomm Dragonboard 845c (DT)
[    5.204022] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX,
TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
[    5.209434] Workqueue: events deferred_probe_work_func
[    5.221786] ufshcd-qcom 1d84000.ufshc:
ufshcd_find_max_sup_active_icc_level: Regulator capability was not
set, actvIccLevel=0
[    5.226541] pstate: 60c00005 (nZCv daif +PAN +UAO -TCO BTYPE=--)
[    5.226551] pc : inode_permission+0x2c/0x178
[    5.226559] lr : lookup_one_len_common+0xac/0x100

ref:
https://lkft.validation.linaro.org/scheduler/job/2899138#L2873

There is a crash like this reported and discussed on the mailing thread.
https://lore.kernel.org/linux-usb/[email protected]/

metadata:
git branch: linux-5.10.y
git repo: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
git commit: 3f05ff8b337097d73b2c408d60befe39dac31bb8
git describe: v5.10.43-131-g3f05ff8b3370
make_kernelversion: 5.10.44-rc2
kernel-config: https://builds.tuxbuild.com/1twkN9cmRWOK3boqZes7Yi1t0OO/config

--
Linaro LKFT
https://lkft.linaro.org

author maintainer
#7 lore raw
Quoted 51 lines · Naresh Kamboju

Hi Greg,

Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.44 release. There are 130 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 16 Jun 2021 16:13:59 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.44-rc2.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

The following kernel crash reported on stable rc 5.10.44-rc2 arm64 db845c board.

[    5.127966] dwc3-qcom a6f8800.usb: failed to get usb-ddr path: -517
[    5.145567] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000002
[    5.154451] Mem abort info:
[    5.157296]   ESR = 0x96000004
[    5.160401]   EC = 0x25: DABT (current EL), IL = 32 bits
[    5.165771]   SET = 0, FnV = 0
[    5.168873]   EA = 0, S1PTW = 0
[    5.172064] Data abort info:
[    5.174980]   ISV = 0, ISS = 0x00000004
[    5.178860]   CM = 0, WnR = 0
[    5.181872] [0000000000000002] user address but active_mm is swapper
[    5.188293] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    5.193922] Modules linked in:
[    5.197022] CPU: 4 PID: 57 Comm: kworker/4:3 Not tainted 5.10.44-rc2 #1
[    5.203697] Hardware name: Thundercomm Dragonboard 845c (DT)
[    5.204022] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX,
TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
[    5.209434] Workqueue: events deferred_probe_work_func
[    5.221786] ufshcd-qcom 1d84000.ufshc:
ufshcd_find_max_sup_active_icc_level: Regulator capability was not
set, actvIccLevel=0
[    5.226541] pstate: 60c00005 (nZCv daif +PAN +UAO -TCO BTYPE=--)
[    5.226551] pc : inode_permission+0x2c/0x178
[    5.226559] lr : lookup_one_len_common+0xac/0x100
Quoted 7 lines

ref:
https://lkft.validation.linaro.org/scheduler/job/2899138#L2873

There is a crash like this reported and discussed on the mailing thread.
https://lore.kernel.org/linux-usb/[email protected]/

Is this crash just on shutdown? That's what that commit was fixing, but it is resolving an error that should not be in the 5.10.y tree.

thanks,

greg k-h

#8 lore raw

Hi Greg,

Quoted 18 lines · Greg Kroah-Hartman
Quoted 17 lines · Naresh Kamboju
Quoted 15 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.44 release. There are 130 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 16 Jun 2021 16:13:59 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

        https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.44-rc2.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

Quoted 7 lines
Quoted 7 lines
Quoted 3 lines

thanks,

greg k-h

The following kernel crash reported on stable rc 5.10.44-rc2 arm64 db845c board.

[    5.127966] dwc3-qcom a6f8800.usb: failed to get usb-ddr path: -517

Looks like -EPROBE_DEFER happened here due to a not-yet-probed dependency (interconnect driver). This leads to dwc3_qcom_probe() unwinding and calling of_platform_depopulate() which triggers the "child" dwc3's driver remove callback dwc3_remove()...

Quoted 28 lines
Quoted 28 lines
[    5.145567] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000002
[    5.154451] Mem abort info:
[    5.157296]   ESR = 0x96000004
[    5.160401]   EC = 0x25: DABT (current EL), IL = 32 bits
[    5.165771]   SET = 0, FnV = 0
[    5.168873]   EA = 0, S1PTW = 0
[    5.172064] Data abort info:
[    5.174980]   ISV = 0, ISS = 0x00000004
[    5.178860]   CM = 0, WnR = 0
[    5.181872] [0000000000000002] user address but active_mm is swapper
[    5.188293] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    5.193922] Modules linked in:
[    5.197022] CPU: 4 PID: 57 Comm: kworker/4:3 Not tainted 5.10.44-rc2 #1
[    5.203697] Hardware name: Thundercomm Dragonboard 845c (DT)
[    5.204022] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX,
TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
[    5.209434] Workqueue: events deferred_probe_work_func
[    5.221786] ufshcd-qcom 1d84000.ufshc:
ufshcd_find_max_sup_active_icc_level: Regulator capability was not
set, actvIccLevel=0
[    5.226541] pstate: 60c00005 (nZCv daif +PAN +UAO -TCO BTYPE=--)
[    5.226551] pc : inode_permission+0x2c/0x178
[    5.226559] lr : lookup_one_len_common+0xac/0x100

ref:
https://lkft.validation.linaro.org/scheduler/job/2899138#L2873

Quoted 7 lines
Quoted 4 lines

There is a crash like this reported and discussed on the mailing thread.
https://lore.kernel.org/linux-usb/[email protected]/

Is this crash just on shutdown? That's what that commit was fixing, but it is resolving an error that should not be in the 5.10.y tree.

Peter reported and fixed it based on reproducing the crash from shutting down but in my manual testing I found that it could be triggered any time dwc3_remove() is called, though I surmised it would be a rare occurence. In this particular case however Naresh is reporting it is triggered even during bootup since dwc3-qcom would add its dwc3 child, but because it encounters a probe deferral it has to subsequently trigger the dwc3 driver remove callback right after it was just probed.

So I think it would be good if Peter's follow-up change (2a042767814b in your usb-next branch) can please go into stable as well as it should help not only for the shutdown/reboot case. Otherwise, my change "usb: dwc3: debugfs: Add and remove endpoint dirs dynamically" could be simply be dropped until they can go in together.

Thanks,
Jack

Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
author maintainer
#9 lore raw
Quoted 79 lines · Jack Pham

Hi Greg,

Quoted 18 lines · Greg Kroah-Hartman
Quoted 17 lines · Naresh Kamboju
Quoted 15 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.44 release. There are 130 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 16 Jun 2021 16:13:59 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

        https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.44-rc2.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

Quoted 7 lines
Quoted 7 lines
Quoted 3 lines

thanks,

greg k-h

The following kernel crash reported on stable rc 5.10.44-rc2 arm64 db845c board.

[    5.127966] dwc3-qcom a6f8800.usb: failed to get usb-ddr path: -517

Looks like -EPROBE_DEFER happened here due to a not-yet-probed dependency (interconnect driver). This leads to dwc3_qcom_probe() unwinding and calling of_platform_depopulate() which triggers the "child" dwc3's driver remove callback dwc3_remove()...

Quoted 28 lines
Quoted 28 lines
[    5.145567] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000002
[    5.154451] Mem abort info:
[    5.157296]   ESR = 0x96000004
[    5.160401]   EC = 0x25: DABT (current EL), IL = 32 bits
[    5.165771]   SET = 0, FnV = 0
[    5.168873]   EA = 0, S1PTW = 0
[    5.172064] Data abort info:
[    5.174980]   ISV = 0, ISS = 0x00000004
[    5.178860]   CM = 0, WnR = 0
[    5.181872] [0000000000000002] user address but active_mm is swapper
[    5.188293] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    5.193922] Modules linked in:
[    5.197022] CPU: 4 PID: 57 Comm: kworker/4:3 Not tainted 5.10.44-rc2 #1
[    5.203697] Hardware name: Thundercomm Dragonboard 845c (DT)
[    5.204022] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX,
TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
[    5.209434] Workqueue: events deferred_probe_work_func
[    5.221786] ufshcd-qcom 1d84000.ufshc:
ufshcd_find_max_sup_active_icc_level: Regulator capability was not
set, actvIccLevel=0
[    5.226541] pstate: 60c00005 (nZCv daif +PAN +UAO -TCO BTYPE=--)
[    5.226551] pc : inode_permission+0x2c/0x178
[    5.226559] lr : lookup_one_len_common+0xac/0x100

ref:
https://lkft.validation.linaro.org/scheduler/job/2899138#L2873

Quoted 7 lines
Quoted 4 lines

There is a crash like this reported and discussed on the mailing thread.
https://lore.kernel.org/linux-usb/[email protected]/

Is this crash just on shutdown? That's what that commit was fixing, but it is resolving an error that should not be in the 5.10.y tree.

Peter reported and fixed it based on reproducing the crash from shutting down but in my manual testing I found that it could be triggered any time dwc3_remove() is called, though I surmised it would be a rare occurence. In this particular case however Naresh is reporting it is triggered even during bootup since dwc3-qcom would add its dwc3 child, but because it encounters a probe deferral it has to subsequently trigger the dwc3 driver remove callback right after it was just probed.

Quoted 5 lines

So I think it would be good if Peter's follow-up change (2a042767814b in your usb-next branch) can please go into stable as well as it should help not only for the shutdown/reboot case. Otherwise, my change "usb: dwc3: debugfs: Add and remove endpoint dirs dynamically" could be simply be dropped until they can go in together.

That will all have to wait until 5.14-rc1 as these patches are not queued up to hit Linus's tree until then. I was not aware that this problem was showing up anywhere except in linux-next.

If we need a fix in 5.13-final before then, please let me know and submit it so that I can take it in my tree and get it to Linus quickly.

thanks,

greg k-h

#10 lore raw
Quoted 86 lines · Greg Kroah-Hartman
Quoted 79 lines · Jack Pham

Hi Greg,

Quoted 18 lines · Greg Kroah-Hartman
Quoted 17 lines · Naresh Kamboju
Quoted 15 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.44 release. There are 130 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 16 Jun 2021 16:13:59 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

        https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.44-rc2.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

Quoted 7 lines
Quoted 7 lines
Quoted 3 lines

thanks,

greg k-h

The following kernel crash reported on stable rc 5.10.44-rc2 arm64 db845c board.

[    5.127966] dwc3-qcom a6f8800.usb: failed to get usb-ddr path: -517

Looks like -EPROBE_DEFER happened here due to a not-yet-probed dependency (interconnect driver). This leads to dwc3_qcom_probe() unwinding and calling of_platform_depopulate() which triggers the "child" dwc3's driver remove callback dwc3_remove()...

Quoted 28 lines
Quoted 28 lines
[    5.145567] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000002
[    5.154451] Mem abort info:
[    5.157296]   ESR = 0x96000004
[    5.160401]   EC = 0x25: DABT (current EL), IL = 32 bits
[    5.165771]   SET = 0, FnV = 0
[    5.168873]   EA = 0, S1PTW = 0
[    5.172064] Data abort info:
[    5.174980]   ISV = 0, ISS = 0x00000004
[    5.178860]   CM = 0, WnR = 0
[    5.181872] [0000000000000002] user address but active_mm is swapper
[    5.188293] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    5.193922] Modules linked in:
[    5.197022] CPU: 4 PID: 57 Comm: kworker/4:3 Not tainted 5.10.44-rc2 #1
[    5.203697] Hardware name: Thundercomm Dragonboard 845c (DT)
[    5.204022] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX,
TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
[    5.209434] Workqueue: events deferred_probe_work_func
[    5.221786] ufshcd-qcom 1d84000.ufshc:
ufshcd_find_max_sup_active_icc_level: Regulator capability was not
set, actvIccLevel=0
[    5.226541] pstate: 60c00005 (nZCv daif +PAN +UAO -TCO BTYPE=--)
[    5.226551] pc : inode_permission+0x2c/0x178
[    5.226559] lr : lookup_one_len_common+0xac/0x100

ref:
https://lkft.validation.linaro.org/scheduler/job/2899138#L2873

Quoted 7 lines
Quoted 4 lines

There is a crash like this reported and discussed on the mailing thread.
https://lore.kernel.org/linux-usb/[email protected]/

Is this crash just on shutdown? That's what that commit was fixing, but it is resolving an error that should not be in the 5.10.y tree.

Peter reported and fixed it based on reproducing the crash from shutting down but in my manual testing I found that it could be triggered any time dwc3_remove() is called, though I surmised it would be a rare occurence. In this particular case however Naresh is reporting it is triggered even during bootup since dwc3-qcom would add its dwc3 child, but because it encounters a probe deferral it has to subsequently trigger the dwc3 driver remove callback right after it was just probed.

Quoted 5 lines

So I think it would be good if Peter's follow-up change (2a042767814b in your usb-next branch) can please go into stable as well as it should help not only for the shutdown/reboot case. Otherwise, my change "usb: dwc3: debugfs: Add and remove endpoint dirs dynamically" could be simply be dropped until they can go in together.

Quoted 6 lines

That will all have to wait until 5.14-rc1 as these patches are not queued up to hit Linus's tree until then. I was not aware that this problem was showing up anywhere except in linux-next.

If we need a fix in 5.13-final before then, please let me know and submit it so that I can take it in my tree and get it to Linus quickly.

Sure. I just responded to one of your auto-replies about Peter's patch "usb: dwc3: core: fix kernel panic when do reboot" getting accepted for usb-next and asked if you can take it for usb-linus for 5.13-final asap as well. Or did you mean I should submit a new separate patch?

As for this failure in $subject on 5.10.44-rc2, I think the prudent thing would be to drop my patch "usb: dwc3: debugfs: Add and remove endpoint dirs dynamically" from the stable queue altogether and revisit it later (when it can go in along with Peter's fix). I hope it's not too late to NAK it (at least for now) on stable?

Sorry for the mess.
Jack

Tested-by Hulk Robot on the v1 series
#12 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.44 release. There are 130 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 16 Jun 2021 16:13:59 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.44-rc2.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

Tested on arm64 and x86 for 5.10.44-rc2,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.10.y
Version: 5.10.44-rc2
Commit: 3f05ff8b337097d73b2c408d60befe39dac31bb8
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8906
passed: 8906
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8906
passed: 8906
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by on the v1 series
#13 lore raw
In reply to Greg Kroah-Hartman

Hi Greg,

Quoted 7 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.44 release. There are 130 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 16 Jun 2021 16:13:59 +0000. Anything received after that time might be too late.

Build test:
mips (gcc version 11.1.1 20210523): 63 configs -> no failure arm (gcc version 11.1.1 20210523): 105 configs -> no new failure arm64 (gcc version 11.1.1 20210523): 2 configs -> no failure x86_64 (gcc version 10.2.1 20210110): 2 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression.
arm64: Booted on rpi4b (4GB model). No regression.

--
Regards
Sudip

author maintainer
#11 lore raw
In reply to Jack Pham
Quoted 99 lines · Jack Pham
Quoted 86 lines · Greg Kroah-Hartman
Quoted 79 lines · Jack Pham

Hi Greg,

Quoted 18 lines · Greg Kroah-Hartman
Quoted 17 lines · Naresh Kamboju
Quoted 15 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.44 release. There are 130 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 16 Jun 2021 16:13:59 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

        https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.44-rc2.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

Quoted 7 lines
Quoted 7 lines
Quoted 3 lines

thanks,

greg k-h

The following kernel crash reported on stable rc 5.10.44-rc2 arm64 db845c board.

[    5.127966] dwc3-qcom a6f8800.usb: failed to get usb-ddr path: -517

Looks like -EPROBE_DEFER happened here due to a not-yet-probed dependency (interconnect driver). This leads to dwc3_qcom_probe() unwinding and calling of_platform_depopulate() which triggers the "child" dwc3's driver remove callback dwc3_remove()...

Quoted 28 lines
Quoted 28 lines
[    5.145567] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000002
[    5.154451] Mem abort info:
[    5.157296]   ESR = 0x96000004
[    5.160401]   EC = 0x25: DABT (current EL), IL = 32 bits
[    5.165771]   SET = 0, FnV = 0
[    5.168873]   EA = 0, S1PTW = 0
[    5.172064] Data abort info:
[    5.174980]   ISV = 0, ISS = 0x00000004
[    5.178860]   CM = 0, WnR = 0
[    5.181872] [0000000000000002] user address but active_mm is swapper
[    5.188293] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    5.193922] Modules linked in:
[    5.197022] CPU: 4 PID: 57 Comm: kworker/4:3 Not tainted 5.10.44-rc2 #1
[    5.203697] Hardware name: Thundercomm Dragonboard 845c (DT)
[    5.204022] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX,
TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
[    5.209434] Workqueue: events deferred_probe_work_func
[    5.221786] ufshcd-qcom 1d84000.ufshc:
ufshcd_find_max_sup_active_icc_level: Regulator capability was not
set, actvIccLevel=0
[    5.226541] pstate: 60c00005 (nZCv daif +PAN +UAO -TCO BTYPE=--)
[    5.226551] pc : inode_permission+0x2c/0x178
[    5.226559] lr : lookup_one_len_common+0xac/0x100

ref:
https://lkft.validation.linaro.org/scheduler/job/2899138#L2873

Quoted 7 lines
Quoted 4 lines

There is a crash like this reported and discussed on the mailing thread.
https://lore.kernel.org/linux-usb/[email protected]/

Is this crash just on shutdown? That's what that commit was fixing, but it is resolving an error that should not be in the 5.10.y tree.

Peter reported and fixed it based on reproducing the crash from shutting down but in my manual testing I found that it could be triggered any time dwc3_remove() is called, though I surmised it would be a rare occurence. In this particular case however Naresh is reporting it is triggered even during bootup since dwc3-qcom would add its dwc3 child, but because it encounters a probe deferral it has to subsequently trigger the dwc3 driver remove callback right after it was just probed.

Quoted 5 lines

So I think it would be good if Peter's follow-up change (2a042767814b in your usb-next branch) can please go into stable as well as it should help not only for the shutdown/reboot case. Otherwise, my change "usb: dwc3: debugfs: Add and remove endpoint dirs dynamically" could be simply be dropped until they can go in together.

Quoted 6 lines

That will all have to wait until 5.14-rc1 as these patches are not queued up to hit Linus's tree until then. I was not aware that this problem was showing up anywhere except in linux-next.

If we need a fix in 5.13-final before then, please let me know and submit it so that I can take it in my tree and get it to Linus quickly.

Sure. I just responded to one of your auto-replies about Peter's patch "usb: dwc3: core: fix kernel panic when do reboot" getting accepted for usb-next and asked if you can take it for usb-linus for 5.13-final asap as well. Or did you mean I should submit a new separate patch?

Quoted 7 lines

As for this failure in $subject on 5.10.44-rc2, I think the prudent thing would be to drop my patch "usb: dwc3: debugfs: Add and remove endpoint dirs dynamically" from the stable queue altogether and revisit it later (when it can go in along with Peter's fix). I hope it's not too late to NAK it (at least for now) on stable?

Sorry for the mess.

Ick, yeah, that's a mess, we had this commit in two different branches, and that's what happens when this gets out of sync...

Anyway, I've cherry-picked this commit now to my branch for 5.13-final, fixed up the "Fixes:" line, and will get it to Linus soon.

I'll also go drop this "dwc3: debugfs:" patch from the stable queue as it will cause problems for people, and not add it back until I can get this fix into Linus's tree as well.

thanks,

greg k-h

Tested-by on the v1 series
#14 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.44 release. There are 130 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 16 Jun 2021 16:13:59 +0000. Anything received after that time might be too late.

Build results:

	total: 156 pass: 156 fail: 0
Qemu test results:
	total: 455 pass: 455 fail: 0

Guenter