fpga: reorganize to subdirs
[email protected]
reviewerv5 cover fpga: reorganize to subdirs
From: Tom Rix <[email protected]>
The incoming xrt patchset has a toplevel subdir xrt/
The current fpga/ uses a single dir with filename prefixes to subdivide owners For consistency, there should be only one way to organize the fpga/ dir. Because the subdir model scales better, refactor to use it.
The discussion wrt xrt is here:
https://lore.kernel.org/linux-fpga/[email protected]/
Follow drivers/net/ethernet/ which has control configs NET_VENDOR_BLA that map to drivers/net/ethernet/bla Since fpgas do not have many vendors, drop the 'VENDOR' and use FPGA_BLA.
There are several new subdirs
altera/
dfl/
lattice/
xilinx/
Each subdir has a Kconfig that has a new/reused
if FPGA_BLA
... existing configs ...
endif FPGA_BLA
Which is sourced into the main fpga/Kconfig
Each subdir has a Makefile whose transversal is controlled in the fpga/Makefile by
obj-$(CONFIG_FPGA_BLA) += bla/
Some cleanup to arrange thing alphabetically and make fpga/Makefile's whitespace look more like net/'s
Changes from
v1
Drop renaming files
Cleanup makefiles
v2
Expand commit messages
Add SPDX to Kconfig
Expand new Kconfig variable help messages
v3
Update Documentation/fpga/dfl.rst for fpga/dfl/
v4
Restore HAS_IOMEM depends in dfl/Kconfig
Fix vendor names in Kconfig's
Tom Rix (4):
fpga: dfl: reorganize to subdir layout
fpga: xilinx: reorganize to subdir layout
fpga: altera: reorganize to subdir layout
fpga: lattice: reorganize to subdir layout
Documentation/fpga/dfl.rst | 4 +-
MAINTAINERS | 2 +-
drivers/fpga/Kconfig | 204 +-----------------
drivers/fpga/Makefile | 47 +---
drivers/fpga/altera/Kconfig | 85 ++++++++
drivers/fpga/altera/Makefile | 12 ++
drivers/fpga/{ => altera}/altera-cvp.c | 0
drivers/fpga/{ => altera}/altera-fpga2sdram.c | 0
.../fpga/{ => altera}/altera-freeze-bridge.c | 0
drivers/fpga/{ => altera}/altera-hps2fpga.c | 0
.../{ => altera}/altera-pr-ip-core-plat.c | 0
drivers/fpga/{ => altera}/altera-pr-ip-core.c | 0
drivers/fpga/{ => altera}/altera-ps-spi.c | 0
drivers/fpga/{ => altera}/socfpga-a10.c | 0
drivers/fpga/{ => altera}/socfpga.c | 0
drivers/fpga/{ => altera}/stratix10-soc.c | 0
drivers/fpga/{ => altera}/ts73xx-fpga.c | 0
drivers/fpga/dfl/Kconfig | 83 +++++++
drivers/fpga/dfl/Makefile | 16 ++
drivers/fpga/{ => dfl}/dfl-afu-dma-region.c | 0
drivers/fpga/{ => dfl}/dfl-afu-error.c | 0
drivers/fpga/{ => dfl}/dfl-afu-main.c | 0
drivers/fpga/{ => dfl}/dfl-afu-region.c | 0
drivers/fpga/{ => dfl}/dfl-afu.h | 0
drivers/fpga/{ => dfl}/dfl-fme-br.c | 0
drivers/fpga/{ => dfl}/dfl-fme-error.c | 0
drivers/fpga/{ => dfl}/dfl-fme-main.c | 0
drivers/fpga/{ => dfl}/dfl-fme-mgr.c | 0
drivers/fpga/{ => dfl}/dfl-fme-perf.c | 0
drivers/fpga/{ => dfl}/dfl-fme-pr.c | 0
drivers/fpga/{ => dfl}/dfl-fme-pr.h | 0
drivers/fpga/{ => dfl}/dfl-fme-region.c | 0
drivers/fpga/{ => dfl}/dfl-fme.h | 0
drivers/fpga/{ => dfl}/dfl-n3000-nios.c | 0
drivers/fpga/{ => dfl}/dfl-pci.c | 0
drivers/fpga/{ => dfl}/dfl.c | 0
drivers/fpga/{ => dfl}/dfl.h | 0
drivers/fpga/lattice/Kconfig | 29 +++
drivers/fpga/lattice/Makefile | 4 +
drivers/fpga/{ => lattice}/ice40-spi.c | 0
drivers/fpga/{ => lattice}/machxo2-spi.c | 0
drivers/fpga/xilinx/Kconfig | 55 +++++
drivers/fpga/xilinx/Makefile | 6 +
.../fpga/{ => xilinx}/xilinx-pr-decoupler.c | 0
drivers/fpga/{ => xilinx}/xilinx-spi.c | 0
drivers/fpga/{ => xilinx}/zynq-fpga.c | 0
drivers/fpga/{ => xilinx}/zynqmp-fpga.c | 0
47 files changed, 305 insertions(+), 242 deletions(-)
create mode 100644 drivers/fpga/altera/Kconfig
create mode 100644 drivers/fpga/altera/Makefile
rename drivers/fpga/{ => altera}/altera-cvp.c (100%)
rename drivers/fpga/{ => altera}/altera-fpga2sdram.c (100%)
rename drivers/fpga/{ => altera}/altera-freeze-bridge.c (100%)
rename drivers/fpga/{ => altera}/altera-hps2fpga.c (100%)
rename drivers/fpga/{ => altera}/altera-pr-ip-core-plat.c (100%)
rename drivers/fpga/{ => altera}/altera-pr-ip-core.c (100%)
rename drivers/fpga/{ => altera}/altera-ps-spi.c (100%)
rename drivers/fpga/{ => altera}/socfpga-a10.c (100%)
rename drivers/fpga/{ => altera}/socfpga.c (100%)
rename drivers/fpga/{ => altera}/stratix10-soc.c (100%)
rename drivers/fpga/{ => altera}/ts73xx-fpga.c (100%)
create mode 100644 drivers/fpga/dfl/Kconfig
create mode 100644 drivers/fpga/dfl/Makefile
rename drivers/fpga/{ => dfl}/dfl-afu-dma-region.c (100%)
rename drivers/fpga/{ => dfl}/dfl-afu-error.c (100%)
rename drivers/fpga/{ => dfl}/dfl-afu-main.c (100%)
rename drivers/fpga/{ => dfl}/dfl-afu-region.c (100%)
rename drivers/fpga/{ => dfl}/dfl-afu.h (100%)
rename drivers/fpga/{ => dfl}/dfl-fme-br.c (100%)
rename drivers/fpga/{ => dfl}/dfl-fme-error.c (100%)
rename drivers/fpga/{ => dfl}/dfl-fme-main.c (100%)
rename drivers/fpga/{ => dfl}/dfl-fme-mgr.c (100%)
rename drivers/fpga/{ => dfl}/dfl-fme-perf.c (100%)
rename drivers/fpga/{ => dfl}/dfl-fme-pr.c (100%)
rename drivers/fpga/{ => dfl}/dfl-fme-pr.h (100%)
rename drivers/fpga/{ => dfl}/dfl-fme-region.c (100%)
rename drivers/fpga/{ => dfl}/dfl-fme.h (100%)
rename drivers/fpga/{ => dfl}/dfl-n3000-nios.c (100%)
rename drivers/fpga/{ => dfl}/dfl-pci.c (100%)
rename drivers/fpga/{ => dfl}/dfl.c (100%)
rename drivers/fpga/{ => dfl}/dfl.h (100%)
create mode 100644 drivers/fpga/lattice/Kconfig
create mode 100644 drivers/fpga/lattice/Makefile
rename drivers/fpga/{ => lattice}/ice40-spi.c (100%)
rename drivers/fpga/{ => lattice}/machxo2-spi.c (100%)
create mode 100644 drivers/fpga/xilinx/Kconfig
create mode 100644 drivers/fpga/xilinx/Makefile
rename drivers/fpga/{ => xilinx}/xilinx-pr-decoupler.c (100%)
rename drivers/fpga/{ => xilinx}/xilinx-spi.c (100%)
rename drivers/fpga/{ => xilinx}/zynq-fpga.c (100%)
rename drivers/fpga/{ => xilinx}/zynqmp-fpga.c (100%)Signature · 1 line
2.26.3
[email protected]
reviewerPATCH v5 1/4 fpga: dfl: reorganize to subdir layout
From: Tom Rix <[email protected]>
Follow drivers/net/ethernet/ which has control configs NET_VENDOR_BLA that map to drivers/net/ethernet/bla Since fpgas do not have many vendors, drop the 'VENDOR' and use FPGA_BLA.
There are several new subdirs
altera/
dfl/
lattice/
xilinx/
Each subdir has a Kconfig that has a new/reused
if FPGA_BLA
... existing configs ...
endif FPGA_BLA
Which is sourced into the main fpga/Kconfig
Each subdir has a Makefile whose transversal is controlled in the fpga/Makefile by
obj-$(CONFIG_FPGA_BLA) += bla/
This is the dfl/ subdir part.
Create a dfl/ subdir
Move dfl-* files to it.
Add a Kconfig and Makefile
Because FPGA_DFL is now used in dfl/Kconfig in a if/endif block, all the other configs in dfl/Kconfig implicitly depend on FPGA_DFL.
---
Documentation/fpga/dfl.rst | 4 +-
MAINTAINERS | 2 +-
drivers/fpga/Kconfig | 80 +-------------------
drivers/fpga/Makefile | 18 +----
drivers/fpga/dfl/Kconfig | 83 +++++++++++++++++++++
drivers/fpga/dfl/Makefile | 16 ++++
drivers/fpga/{ => dfl}/dfl-afu-dma-region.c | 0
drivers/fpga/{ => dfl}/dfl-afu-error.c | 0
drivers/fpga/{ => dfl}/dfl-afu-main.c | 0
drivers/fpga/{ => dfl}/dfl-afu-region.c | 0
drivers/fpga/{ => dfl}/dfl-afu.h | 0
drivers/fpga/{ => dfl}/dfl-fme-br.c | 0
drivers/fpga/{ => dfl}/dfl-fme-error.c | 0
drivers/fpga/{ => dfl}/dfl-fme-main.c | 0
drivers/fpga/{ => dfl}/dfl-fme-mgr.c | 0
drivers/fpga/{ => dfl}/dfl-fme-perf.c | 0
drivers/fpga/{ => dfl}/dfl-fme-pr.c | 0
drivers/fpga/{ => dfl}/dfl-fme-pr.h | 0
drivers/fpga/{ => dfl}/dfl-fme-region.c | 0
drivers/fpga/{ => dfl}/dfl-fme.h | 0
drivers/fpga/{ => dfl}/dfl-n3000-nios.c | 0
drivers/fpga/{ => dfl}/dfl-pci.c | 0
drivers/fpga/{ => dfl}/dfl.c | 0
drivers/fpga/{ => dfl}/dfl.h | 0
24 files changed, 104 insertions(+), 99 deletions(-)
create mode 100644 drivers/fpga/dfl/Kconfig
create mode 100644 drivers/fpga/dfl/Makefile
rename drivers/fpga/{ => dfl}/dfl-afu-dma-region.c (100%)
rename drivers/fpga/{ => dfl}/dfl-afu-error.c (100%)
rename drivers/fpga/{ => dfl}/dfl-afu-main.c (100%)
rename drivers/fpga/{ => dfl}/dfl-afu-region.c (100%)
rename drivers/fpga/{ => dfl}/dfl-afu.h (100%)
rename drivers/fpga/{ => dfl}/dfl-fme-br.c (100%)
rename drivers/fpga/{ => dfl}/dfl-fme-error.c (100%)
rename drivers/fpga/{ => dfl}/dfl-fme-main.c (100%)
rename drivers/fpga/{ => dfl}/dfl-fme-mgr.c (100%)
rename drivers/fpga/{ => dfl}/dfl-fme-perf.c (100%)
rename drivers/fpga/{ => dfl}/dfl-fme-pr.c (100%)
rename drivers/fpga/{ => dfl}/dfl-fme-pr.h (100%)
rename drivers/fpga/{ => dfl}/dfl-fme-region.c (100%)
rename drivers/fpga/{ => dfl}/dfl-fme.h (100%)
rename drivers/fpga/{ => dfl}/dfl-n3000-nios.c (100%)
rename drivers/fpga/{ => dfl}/dfl-pci.c (100%)
rename drivers/fpga/{ => dfl}/dfl.c (100%)
rename drivers/fpga/{ => dfl}/dfl.h (100%)Documentation/fpga/dfl.rst +2 -2
@@ -210,7 +210,7 @@ device and etc. Its driver module is always loaded first once the device is created by the system. This driver plays an infrastructural role in the driver architecture. It locates the DFLs in the device memory, handles them and related resources to common interfaces from DFL framework for enumeration. -(Please refer to drivers/fpga/dfl.c for detailed enumeration APIs). +(Please refer to drivers/fpga/dfl/dfl.c for detailed enumeration APIs). The FPGA Management Engine (FME) driver is a platform driver which is loaded automatically after FME platform device creation from the DFL device module. It
@@ -499,7 +499,7 @@ In some cases, we may need to add some new private features to existing FIUs framework, as each private feature will be parsed automatically and related mmio resources can be found under FIU platform device created by DFL framework. Developer only needs to provide a sub feature driver with matched feature id. -FME Partial Reconfiguration Sub Feature driver (see drivers/fpga/dfl-fme-pr.c) +FME Partial Reconfiguration Sub Feature driver (see drivers/fpga/dfl/dfl-fme-pr.c) could be a reference. Location of DFLs on a PCI Device
MAINTAINERS +1 -1
@@ -7244,7 +7244,7 @@ L: [email protected] S: Maintained F: Documentation/ABI/testing/sysfs-bus-dfl* F: Documentation/fpga/dfl.rst -F: drivers/fpga/dfl* +F: drivers/fpga/dfl/ F: drivers/uio/uio_dfl.c F: include/linux/dfl.h F: include/uapi/linux/fpga-dfl.h
drivers/fpga/Kconfig +1 -79
86 lines not on this page · raw message
drivers/fpga/Makefile +1 -17
@@ -31,20 +31,4 @@ obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o obj-$(CONFIG_FPGA_REGION) += fpga-region.o obj-$(CONFIG_OF_FPGA_REGION) += of-fpga-region.o -# FPGA Device Feature List Support -obj-$(CONFIG_FPGA_DFL) += dfl.o -obj-$(CONFIG_FPGA_DFL_FME) += dfl-fme.o -obj-$(CONFIG_FPGA_DFL_FME_MGR) += dfl-fme-mgr.o -obj-$(CONFIG_FPGA_DFL_FME_BRIDGE) += dfl-fme-br.o -obj-$(CONFIG_FPGA_DFL_FME_REGION) += dfl-fme-region.o -obj-$(CONFIG_FPGA_DFL_AFU) += dfl-afu.o - -dfl-fme-objs := dfl-fme-main.o dfl-fme-pr.o dfl-fme-error.o -dfl-fme-objs += dfl-fme-perf.o -dfl-afu-objs := dfl-afu-main.o dfl-afu-region.o dfl-afu-dma-region.o -dfl-afu-objs += dfl-afu-error.o - -obj-$(CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000) += dfl-n3000-nios.o - -# Drivers for FPGAs which implement DFL -obj-$(CONFIG_FPGA_DFL_PCI) += dfl-pci.o +obj-$(CONFIG_FPGA_DFL) += dfl/
drivers/fpga/dfl/Kconfig new file +83 -0
83 lines not on this page · raw message
drivers/fpga/dfl/Makefile new file +16 -0
@@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# FPGA Device Feature List (DFL) Support +obj-$(CONFIG_FPGA_DFL) += dfl.o +obj-$(CONFIG_FPGA_DFL_AFU) += dfl-afu.o +obj-$(CONFIG_FPGA_DFL_FME) += dfl-fme.o +obj-$(CONFIG_FPGA_DFL_FME_BRIDGE) += dfl-fme-br.o +obj-$(CONFIG_FPGA_DFL_FME_MGR) += dfl-fme-mgr.o +obj-$(CONFIG_FPGA_DFL_FME_REGION) += dfl-fme-region.o +obj-$(CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000) += dfl-n3000-nios.o +obj-$(CONFIG_FPGA_DFL_PCI) += dfl-pci.o + +dfl-fme-objs := dfl-fme-main.o dfl-fme-pr.o dfl-fme-error.o \ + dfl-fme-perf.o +dfl-afu-objs := dfl-afu-main.o dfl-afu-region.o dfl-afu-dma-region.o \ + dfl-afu-error.o
drivers/fpga/dfl/dfl-afu-dma-region.c renamed from drivers/fpga/dfl-afu-dma-region.c +0 -0
drivers/fpga/dfl/dfl-afu-error.c renamed from drivers/fpga/dfl-afu-error.c +0 -0
drivers/fpga/dfl/dfl-afu-main.c renamed from drivers/fpga/dfl-afu-main.c +0 -0
drivers/fpga/dfl/dfl-afu-region.c renamed from drivers/fpga/dfl-afu-region.c +0 -0
drivers/fpga/dfl/dfl-afu.h renamed from drivers/fpga/dfl-afu.h +0 -0
drivers/fpga/dfl/dfl-fme-br.c renamed from drivers/fpga/dfl-fme-br.c +0 -0
drivers/fpga/dfl/dfl-fme-error.c renamed from drivers/fpga/dfl-fme-error.c +0 -0
drivers/fpga/dfl/dfl-fme-main.c renamed from drivers/fpga/dfl-fme-main.c +0 -0
drivers/fpga/dfl/dfl-fme-mgr.c renamed from drivers/fpga/dfl-fme-mgr.c +0 -0
drivers/fpga/dfl/dfl-fme-perf.c renamed from drivers/fpga/dfl-fme-perf.c +0 -0
drivers/fpga/dfl/dfl-fme-pr.c renamed from drivers/fpga/dfl-fme-pr.c +0 -0
drivers/fpga/dfl/dfl-fme-pr.h renamed from drivers/fpga/dfl-fme-pr.h +0 -0
drivers/fpga/dfl/dfl-fme-region.c renamed from drivers/fpga/dfl-fme-region.c +0 -0
drivers/fpga/dfl/dfl-fme.h renamed from drivers/fpga/dfl-fme.h +0 -0
drivers/fpga/dfl/dfl-n3000-nios.c renamed from drivers/fpga/dfl-n3000-nios.c +0 -0
drivers/fpga/dfl/dfl-pci.c renamed from drivers/fpga/dfl-pci.c +0 -0
drivers/fpga/dfl/dfl.c renamed from drivers/fpga/dfl.c +0 -0
drivers/fpga/dfl/dfl.h renamed from drivers/fpga/dfl.h +0 -0
Signature · 1 line
2.26.3
[email protected]
reviewerPATCH v5 2/4 fpga: xilinx: reorganize to subdir layout
In reply to [email protected]From: Tom Rix <[email protected]>
Follow drivers/net/ethernet/ which has control configs NET_VENDOR_BLA that map to drivers/net/ethernet/bla Since fpgas do not have many vendors, drop the 'VENDOR' and use FPGA_BLA.
There are several new subdirs
altera/
dfl/
lattice/
xilinx/
Each subdir has a Kconfig that has a new/reused
if FPGA_BLA
... existing configs ...
endif FPGA_BLA
Which is sourced into the main fpga/Kconfig
Each subdir has a Makefile whose transversal is controlled in the fpga/Makefile by
obj-$(CONFIG_FPGA_BLA) += bla/
This is the xilinx/ subdir part
Create a xilinx/ subdir
Move xilinx-* and zynq* files to it.
Add a Kconfig and Makefile
---
drivers/fpga/Kconfig | 40 +-------------
drivers/fpga/Makefile | 5 +-
drivers/fpga/xilinx/Kconfig | 55 +++++++++++++++++++
drivers/fpga/xilinx/Makefile | 6 ++
.../fpga/{ => xilinx}/xilinx-pr-decoupler.c | 0
drivers/fpga/{ => xilinx}/xilinx-spi.c | 0
drivers/fpga/{ => xilinx}/zynq-fpga.c | 0
drivers/fpga/{ => xilinx}/zynqmp-fpga.c | 0
8 files changed, 63 insertions(+), 43 deletions(-)
create mode 100644 drivers/fpga/xilinx/Kconfig
create mode 100644 drivers/fpga/xilinx/Makefile
rename drivers/fpga/{ => xilinx}/xilinx-pr-decoupler.c (100%)
rename drivers/fpga/{ => xilinx}/xilinx-spi.c (100%)
rename drivers/fpga/{ => xilinx}/zynq-fpga.c (100%)
rename drivers/fpga/{ => xilinx}/zynqmp-fpga.c (100%)drivers/fpga/Kconfig +1 -39
@@ -52,25 +52,12 @@ config FPGA_MGR_ALTERA_CVP FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V, Arria 10 and Stratix10 Altera FPGAs using the CvP interface over PCIe. -config FPGA_MGR_ZYNQ_FPGA - tristate "Xilinx Zynq FPGA" - depends on ARCH_ZYNQ || COMPILE_TEST - help - FPGA manager driver support for Xilinx Zynq FPGAs. - config FPGA_MGR_STRATIX10_SOC tristate "Intel Stratix10 SoC FPGA Manager" depends on (ARCH_INTEL_SOCFPGA && INTEL_STRATIX10_SERVICE) help FPGA manager driver support for the Intel Stratix10 SoC. -config FPGA_MGR_XILINX_SPI - tristate "Xilinx Configuration over Slave Serial (SPI)" - depends on SPI - help - FPGA manager driver support for Xilinx FPGA configuration - over slave serial interface. - config FPGA_MGR_ICE40_SPI tristate "Lattice iCE40 SPI" depends on OF && SPI
@@ -113,23 +100,6 @@ config ALTERA_FREEZE_BRIDGE isolate one region of the FPGA from the busses while that region is being reprogrammed. -config XILINX_PR_DECOUPLER - tristate "Xilinx LogiCORE PR Decoupler" - depends on FPGA_BRIDGE - depends on HAS_IOMEM - help - Say Y to enable drivers for Xilinx LogiCORE PR Decoupler - or Xilinx Dynamic Function eXchnage AIX Shutdown Manager. - The PR Decoupler exists in the FPGA fabric to isolate one - region of the FPGA from the busses while that region is - being reprogrammed during partial reconfig. - The Dynamic Function eXchange AXI shutdown manager prevents - AXI traffic from passing through the bridge. The controller - safely handles AXI4MM and AXI4-Lite interfaces on a - Reconfigurable Partition when it is undergoing dynamic - reconfiguration, preventing the system deadlock that can - occur if AXI transactions are interrupted by DFX. - config FPGA_REGION tristate "FPGA Region" depends on FPGA_BRIDGE
@@ -146,14 +116,6 @@ config OF_FPGA_REGION overlay. source "drivers/fpga/dfl/Kconfig" - -config FPGA_MGR_ZYNQMP_FPGA - tristate "Xilinx ZynqMP FPGA" - depends on ZYNQMP_FIRMWARE || (!ZYNQMP_FIRMWARE && COMPILE_TEST) - help - FPGA manager driver support for Xilinx ZynqMP FPGAs. - This driver uses the processor configuration port(PCAP) - to configure the programmable logic(PL) through PS - on ZynqMP SoC. +source "drivers/fpga/xilinx/Kconfig" endif # FPGA
drivers/fpga/Makefile +1 -4
@@ -15,9 +15,6 @@ obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o obj-$(CONFIG_FPGA_MGR_STRATIX10_SOC) += stratix10-soc.o obj-$(CONFIG_FPGA_MGR_TS73XX) += ts73xx-fpga.o -obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o -obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o -obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o obj-$(CONFIG_ALTERA_PR_IP_CORE) += altera-pr-ip-core.o obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o
@@ -25,10 +22,10 @@ obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE) += altera-hps2fpga.o altera-fpga2sdram.o obj-$(CONFIG_ALTERA_FREEZE_BRIDGE) += altera-freeze-bridge.o -obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o # High Level Interfaces obj-$(CONFIG_FPGA_REGION) += fpga-region.o obj-$(CONFIG_OF_FPGA_REGION) += of-fpga-region.o obj-$(CONFIG_FPGA_DFL) += dfl/ +obj-$(CONFIG_FPGA_XILINX) += xilinx/
drivers/fpga/xilinx/Kconfig new file +55 -0
55 lines not on this page · raw message
drivers/fpga/xilinx/Makefile new file +6 -0
@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0-only + +obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o +obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o +obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o +obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o
drivers/fpga/xilinx/xilinx-pr-decoupler.c renamed from drivers/fpga/xilinx-pr-decoupler.c +0 -0
drivers/fpga/xilinx/xilinx-spi.c renamed from drivers/fpga/xilinx-spi.c +0 -0
drivers/fpga/xilinx/zynq-fpga.c renamed from drivers/fpga/zynq-fpga.c +0 -0
drivers/fpga/xilinx/zynqmp-fpga.c renamed from drivers/fpga/zynqmp-fpga.c +0 -0
Signature · 1 line
2.26.3
[email protected]
reviewerPATCH v5 3/4 fpga: altera: reorganize to subdir layout
In reply to [email protected]From: Tom Rix <[email protected]>
Follow drivers/net/ethernet/ which has control configs NET_VENDOR_BLA that map to drivers/net/ethernet/bla Since fpgas do not have many vendors, drop the 'VENDOR' and use FPGA_BLA.
There are several new subdirs
altera/
dfl/
lattice/
xilinx/
Each subdir has a Kconfig that has a new/reused
if FPGA_BLA
... existing configs ...
endif FPGA_BLA
Which is sourced into the main fpga/Kconfig
Each subdir has a Makefile whose transversal is controlled in the fpga/Makefile by
obj-$(CONFIG_FPGA_BLA) += bla/
This is the altera/ subdir part.
Create a altera/ subdir
Move altera-* and soc* ts73xx* files to it.
Add a Kconfig and Makefile
---
drivers/fpga/Kconfig | 70 +--------------
drivers/fpga/Makefile | 11 +--
drivers/fpga/altera/Kconfig | 85 +++++++++++++++++++
drivers/fpga/altera/Makefile | 12 +++
drivers/fpga/{ => altera}/altera-cvp.c | 0
drivers/fpga/{ => altera}/altera-fpga2sdram.c | 0
.../fpga/{ => altera}/altera-freeze-bridge.c | 0
drivers/fpga/{ => altera}/altera-hps2fpga.c | 0
.../{ => altera}/altera-pr-ip-core-plat.c | 0
drivers/fpga/{ => altera}/altera-pr-ip-core.c | 0
drivers/fpga/{ => altera}/altera-ps-spi.c | 0
drivers/fpga/{ => altera}/socfpga-a10.c | 0
drivers/fpga/{ => altera}/socfpga.c | 0
drivers/fpga/{ => altera}/stratix10-soc.c | 0
drivers/fpga/{ => altera}/ts73xx-fpga.c | 0
15 files changed, 99 insertions(+), 79 deletions(-)
create mode 100644 drivers/fpga/altera/Kconfig
create mode 100644 drivers/fpga/altera/Makefile
rename drivers/fpga/{ => altera}/altera-cvp.c (100%)
rename drivers/fpga/{ => altera}/altera-fpga2sdram.c (100%)
rename drivers/fpga/{ => altera}/altera-freeze-bridge.c (100%)
rename drivers/fpga/{ => altera}/altera-hps2fpga.c (100%)
rename drivers/fpga/{ => altera}/altera-pr-ip-core-plat.c (100%)
rename drivers/fpga/{ => altera}/altera-pr-ip-core.c (100%)
rename drivers/fpga/{ => altera}/altera-ps-spi.c (100%)
rename drivers/fpga/{ => altera}/socfpga-a10.c (100%)
rename drivers/fpga/{ => altera}/socfpga.c (100%)
rename drivers/fpga/{ => altera}/stratix10-soc.c (100%)
rename drivers/fpga/{ => altera}/ts73xx-fpga.c (100%)drivers/fpga/Kconfig +1 -69
@@ -12,52 +12,6 @@ menuconfig FPGA if FPGA -config FPGA_MGR_SOCFPGA - tristate "Altera SOCFPGA FPGA Manager" - depends on ARCH_INTEL_SOCFPGA || COMPILE_TEST - help - FPGA manager driver support for Altera SOCFPGA. - -config FPGA_MGR_SOCFPGA_A10 - tristate "Altera SoCFPGA Arria10" - depends on ARCH_INTEL_SOCFPGA || COMPILE_TEST - select REGMAP_MMIO - help - FPGA manager driver support for Altera Arria10 SoCFPGA. - -config ALTERA_PR_IP_CORE - tristate "Altera Partial Reconfiguration IP Core" - help - Core driver support for Altera Partial Reconfiguration IP component - -config ALTERA_PR_IP_CORE_PLAT - tristate "Platform support of Altera Partial Reconfiguration IP Core" - depends on ALTERA_PR_IP_CORE && OF && HAS_IOMEM - help - Platform driver support for Altera Partial Reconfiguration IP - component - -config FPGA_MGR_ALTERA_PS_SPI - tristate "Altera FPGA Passive Serial over SPI" - depends on SPI - select BITREVERSE - help - FPGA manager driver support for Altera Arria/Cyclone/Stratix - using the passive serial interface over SPI. - -config FPGA_MGR_ALTERA_CVP - tristate "Altera CvP FPGA Manager" - depends on PCI - help - FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V, - Arria 10 and Stratix10 Altera FPGAs using the CvP interface over PCIe. - -config FPGA_MGR_STRATIX10_SOC - tristate "Intel Stratix10 SoC FPGA Manager" - depends on (ARCH_INTEL_SOCFPGA && INTEL_STRATIX10_SERVICE) - help - FPGA manager driver support for the Intel Stratix10 SoC. - config FPGA_MGR_ICE40_SPI tristate "Lattice iCE40 SPI" depends on OF && SPI
@@ -71,35 +25,12 @@ config FPGA_MGR_MACHXO2_SPI FPGA manager driver support for Lattice MachXO2 configuration over slave SPI interface. -config FPGA_MGR_TS73XX - tristate "Technologic Systems TS-73xx SBC FPGA Manager" - depends on ARCH_EP93XX && MACH_TS72XX - help - FPGA manager driver support for the Altera Cyclone II FPGA - present on the TS-73xx SBC boards. - config FPGA_BRIDGE tristate "FPGA Bridge Framework" help Say Y here if you want to support bridges connected between host processors and FPGAs or between FPGAs. -config SOCFPGA_FPGA_BRIDGE - tristate "Altera SoCFPGA FPGA Bridges" - depends on ARCH_INTEL_SOCFPGA && FPGA_BRIDGE - help - Say Y to enable drivers for FPGA bridges for Altera SOCFPGA - devices. - -config ALTERA_FREEZE_BRIDGE - tristate "Altera FPGA Freeze Bridge" - depends on FPGA_BRIDGE && HAS_IOMEM - help - Say Y to enable drivers for Altera FPGA Freeze bridges. A - freeze bridge is a bridge that exists in the FPGA fabric to - isolate one region of the FPGA from the busses while that - region is being reprogrammed. - config FPGA_REGION tristate "FPGA Region" depends on FPGA_BRIDGE
@@ -115,6 +46,7 @@ config OF_FPGA_REGION Support for loading FPGA images by applying a Device Tree overlay. +source "drivers/fpga/altera/Kconfig" source "drivers/fpga/dfl/Kconfig" source "drivers/fpga/xilinx/Kconfig"
drivers/fpga/Makefile +1 -10
@@ -7,25 +7,16 @@ obj-$(CONFIG_FPGA) += fpga-mgr.o # FPGA Manager Drivers -obj-$(CONFIG_FPGA_MGR_ALTERA_CVP) += altera-cvp.o -obj-$(CONFIG_FPGA_MGR_ALTERA_PS_SPI) += altera-ps-spi.o obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o obj-$(CONFIG_FPGA_MGR_MACHXO2_SPI) += machxo2-spi.o -obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o -obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o -obj-$(CONFIG_FPGA_MGR_STRATIX10_SOC) += stratix10-soc.o -obj-$(CONFIG_FPGA_MGR_TS73XX) += ts73xx-fpga.o -obj-$(CONFIG_ALTERA_PR_IP_CORE) += altera-pr-ip-core.o -obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o # FPGA Bridge Drivers obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o -obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE) += altera-hps2fpga.o altera-fpga2sdram.o -obj-$(CONFIG_ALTERA_FREEZE_BRIDGE) += altera-freeze-bridge.o # High Level Interfaces obj-$(CONFIG_FPGA_REGION) += fpga-region.o obj-$(CONFIG_OF_FPGA_REGION) += of-fpga-region.o +obj-$(CONFIG_FPGA_ALTERA) += altera/ obj-$(CONFIG_FPGA_DFL) += dfl/ obj-$(CONFIG_FPGA_XILINX) += xilinx/
drivers/fpga/altera/Kconfig new file +85 -0
85 lines not on this page · raw message
drivers/fpga/altera/Makefile new file +12 -0
@@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0-only + +obj-$(CONFIG_ALTERA_FREEZE_BRIDGE) += altera-freeze-bridge.o +obj-$(CONFIG_ALTERA_PR_IP_CORE) += altera-pr-ip-core.o +obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o +obj-$(CONFIG_FPGA_MGR_ALTERA_CVP) += altera-cvp.o +obj-$(CONFIG_FPGA_MGR_ALTERA_PS_SPI) += altera-ps-spi.o +obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o +obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o +obj-$(CONFIG_FPGA_MGR_STRATIX10_SOC) += stratix10-soc.o +obj-$(CONFIG_FPGA_MGR_TS73XX) += ts73xx-fpga.o +obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE) += altera-hps2fpga.o altera-fpga2sdram.o
drivers/fpga/altera/altera-cvp.c renamed from drivers/fpga/altera-cvp.c +0 -0
drivers/fpga/altera/altera-fpga2sdram.c renamed from drivers/fpga/altera-fpga2sdram.c +0 -0
drivers/fpga/altera/altera-freeze-bridge.c renamed from drivers/fpga/altera-freeze-bridge.c +0 -0
drivers/fpga/altera/altera-hps2fpga.c renamed from drivers/fpga/altera-hps2fpga.c +0 -0
drivers/fpga/altera/altera-pr-ip-core-plat.c renamed from drivers/fpga/altera-pr-ip-core-plat.c +0 -0
drivers/fpga/altera/altera-pr-ip-core.c renamed from drivers/fpga/altera-pr-ip-core.c +0 -0
drivers/fpga/altera/altera-ps-spi.c renamed from drivers/fpga/altera-ps-spi.c +0 -0
drivers/fpga/altera/socfpga-a10.c renamed from drivers/fpga/socfpga-a10.c +0 -0
drivers/fpga/altera/socfpga.c renamed from drivers/fpga/socfpga.c +0 -0
drivers/fpga/altera/stratix10-soc.c renamed from drivers/fpga/stratix10-soc.c +0 -0
drivers/fpga/altera/ts73xx-fpga.c renamed from drivers/fpga/ts73xx-fpga.c +0 -0
Signature · 1 line
2.26.3
[email protected]
reviewerPATCH v5 4/4 fpga: lattice: reorganize to subdir layout
In reply to [email protected]From: Tom Rix <[email protected]>
Follow drivers/net/ethernet/ which has control configs NET_VENDOR_BLA that map to drivers/net/ethernet/bla Since fpgas do not have many vendors, drop the 'VENDOR' and use FPGA_BLA.
There are several new subdirs
altera/
dfl/
lattice/
xilinx/
Each subdir has a Kconfig that has a new/reused
if FPGA_BLA
... existing configs ...
endif FPGA_BLA
Which is sourced into the main fpga/Kconfig
Each subdir has a Makefile whose transversal is controlled in the fpga/Makefile by
obj-$(CONFIG_FPGA_BLA) += bla/
This is the lattice/ subdir part.
Create a lattice/ subdir
Move ice40* and machxo2* files to it.
Add a Kconfig and Makefile
---
drivers/fpga/Kconfig | 14 +-----------
drivers/fpga/Makefile | 13 ++++-------
drivers/fpga/lattice/Kconfig | 29 ++++++++++++++++++++++++
drivers/fpga/lattice/Makefile | 4 ++++
drivers/fpga/{ => lattice}/ice40-spi.c | 0
drivers/fpga/{ => lattice}/machxo2-spi.c | 0
6 files changed, 39 insertions(+), 21 deletions(-)
create mode 100644 drivers/fpga/lattice/Kconfig
create mode 100644 drivers/fpga/lattice/Makefile
rename drivers/fpga/{ => lattice}/ice40-spi.c (100%)
rename drivers/fpga/{ => lattice}/machxo2-spi.c (100%)drivers/fpga/Kconfig +1 -13
@@ -12,19 +12,6 @@ menuconfig FPGA if FPGA -config FPGA_MGR_ICE40_SPI - tristate "Lattice iCE40 SPI" - depends on OF && SPI - help - FPGA manager driver support for Lattice iCE40 FPGAs over SPI. - -config FPGA_MGR_MACHXO2_SPI - tristate "Lattice MachXO2 SPI" - depends on SPI - help - FPGA manager driver support for Lattice MachXO2 configuration - over slave SPI interface. - config FPGA_BRIDGE tristate "FPGA Bridge Framework" help
@@ -48,6 +35,7 @@ config OF_FPGA_REGION source "drivers/fpga/altera/Kconfig" source "drivers/fpga/dfl/Kconfig" +source "drivers/fpga/lattice/Kconfig" source "drivers/fpga/xilinx/Kconfig" endif # FPGA
drivers/fpga/Makefile +5 -8
@@ -4,19 +4,16 @@ # # Core FPGA Manager Framework -obj-$(CONFIG_FPGA) += fpga-mgr.o - -# FPGA Manager Drivers -obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o -obj-$(CONFIG_FPGA_MGR_MACHXO2_SPI) += machxo2-spi.o +obj-$(CONFIG_FPGA) += fpga-mgr.o # FPGA Bridge Drivers -obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o +obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o # High Level Interfaces -obj-$(CONFIG_FPGA_REGION) += fpga-region.o -obj-$(CONFIG_OF_FPGA_REGION) += of-fpga-region.o +obj-$(CONFIG_FPGA_REGION) += fpga-region.o +obj-$(CONFIG_OF_FPGA_REGION) += of-fpga-region.o obj-$(CONFIG_FPGA_ALTERA) += altera/ obj-$(CONFIG_FPGA_DFL) += dfl/ +obj-$(CONFIG_FPGA_LATTICE) += lattice/ obj-$(CONFIG_FPGA_XILINX) += xilinx/
drivers/fpga/lattice/Kconfig new file +29 -0
@@ -0,0 +1,29 @@ +# SPDX-License-Identifier: GPL-2.0-only + +config FPGA_LATTICE + bool "Lattice FPGAs" + default y + help + If you have a Lattice FPGA, say Y. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Lattice FPGAs. If you say Y, you will be asked + for your specific device in the following questions. + +if FPGA_LATTICE + +config FPGA_MGR_ICE40_SPI + tristate "Lattice iCE40 SPI" + depends on OF && SPI + help + FPGA manager driver support for Lattice iCE40 FPGAs over SPI. + +config FPGA_MGR_MACHXO2_SPI + tristate "Lattice MachXO2 SPI" + depends on SPI + help + FPGA manager driver support for Lattice MachXO2 configuration + over slave SPI interface. + +endif #FPGA_LATTICE
drivers/fpga/lattice/Makefile new file +4 -0
@@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only + +obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o +obj-$(CONFIG_FPGA_MGR_MACHXO2_SPI) += machxo2-spi.o
drivers/fpga/lattice/ice40-spi.c renamed from drivers/fpga/ice40-spi.c +0 -0
drivers/fpga/lattice/machxo2-spi.c renamed from drivers/fpga/machxo2-spi.c +0 -0
Signature · 1 line
2.26.3
kernel test robot
build botRe: [PATCH v5 3/4] fpga: altera: reorganize to subdir layout
In reply to [email protected]I love your patch! Perhaps something to improve:
Hi,
I love your patch! Perhaps something to improve:
[auto build test WARNING on linus/master]
[also build test WARNING on v5.13 next-20210701]
[cannot apply to xlnx/master]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/trix-redhat-com/fpga-reorganize-to-subdirs/20210623-040811 base: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 0c18f29aae7ce3dadd26d8ee3505d07cc982df75 config: x86_64-randconfig-r031-20210702 (attached as .config) compiler: clang version 13.0.0 (https://github.com/llvm/llvm-project 9eb613b2de3163686b1a4bd1160f15ac56a4b083)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# install x86_64 cross compiling tool for clang build
# apt-get install binutils-x86-64-linux-gnu
# https://github.com/0day-ci/linux/commit/5e515251fd2c4a922934399c3c2007271dcf1398
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review trix-redhat-com/fpga-reorganize-to-subdirs/20210623-040811 git checkout 5e515251fd2c4a922934399c3c2007271dcf1398
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64
If you fix the issue, kindly add following tag as appropriate
All warnings (new ones prefixed by >>):
>> drivers/fpga/altera/altera-freeze-bridge.c:201:34: warning: unused variable 'altera_freeze_br_of_match' [-Wunused-const-variable]
static const struct of_device_id altera_freeze_br_of_match[] = {
^1 warning generated.
vim +/altera_freeze_br_of_match +201 drivers/fpga/altera/altera-freeze-bridge.c
ca24a648f535a0 drivers/fpga/altera-freeze-bridge.c Alan Tull 2016-11-01 200
ca24a648f535a0 drivers/fpga/altera-freeze-bridge.c Alan Tull 2016-11-01 @201 static const struct of_device_id altera_freeze_br_of_match[] = {
ca24a648f535a0 drivers/fpga/altera-freeze-bridge.c Alan Tull 2016-11-01 202 { .compatible = "altr,freeze-bridge-controller", },
ca24a648f535a0 drivers/fpga/altera-freeze-bridge.c Alan Tull 2016-11-01 203 {},
ca24a648f535a0 drivers/fpga/altera-freeze-bridge.c Alan Tull 2016-11-01 204 };
ca24a648f535a0 drivers/fpga/altera-freeze-bridge.c Alan Tull 2016-11-01 205 MODULE_DEVICE_TABLE(of, altera_freeze_br_of_match);ca24a648f535a0 drivers/fpga/altera-freeze-bridge.c Alan Tull 2016-11-01 206
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
Moritz Fischer
maintainerRe: [PATCH v5 3/4] fpga: altera: reorganize to subdir layout
Quoted 46 lines · kernel test robot
Hi,
I love your patch! Perhaps something to improve:
[auto build test WARNING on linus/master]
[also build test WARNING on v5.13 next-20210701]
[cannot apply to xlnx/master]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]url: https://github.com/0day-ci/linux/commits/trix-redhat-com/fpga-reorganize-to-subdirs/20210623-040811 base: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 0c18f29aae7ce3dadd26d8ee3505d07cc982df75 config: x86_64-randconfig-r031-20210702 (attached as .config) compiler: clang version 13.0.0 (https://github.com/llvm/llvm-project 9eb613b2de3163686b1a4bd1160f15ac56a4b083)reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# installx86_64cross compiling tool for clang build
# apt-get install binutils-x86-64-linux-gnu
# https://github.com/0day-ci/linux/commit/5e515251fd2c4a922934399c3c2007271dcf1398
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review trix-redhat-com/fpga-reorganize-to-subdirs/20210623-040811 git checkout5e515251fd2c4a922934399c3c2007271dcf1398
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64If you fix the issue, kindly add following tag as appropriate
Reported-by kernel test robot <[email protected]>All warnings (new ones prefixed by >>):
Quoted 1 line
Quoted 1 line
drivers/fpga/altera/altera-freeze-bridge.c:201:34: warning: unused variable 'altera_freeze_br_of_match' [-Wunused-const-variable]static const struct of_device_id altera_freeze_br_of_match[] = { ^1 warning generated.
vim +/altera_freeze_br_of_match +201
drivers/fpga/altera/altera-freeze-bridge.c
ca24a648f535a0drivers/fpga/altera-freeze-bridge.cAlan Tull 2016-11-01 200ca24a648f535a0 drivers/fpga/altera-freeze-bridge.c Alan Tull 2016-11-01 @201 static const struct of_device_id altera_freeze_br_of_match[] = { ca24a648f535a0 drivers/fpga/altera-freeze-bridge.c Alan Tull 2016-11-01 202 { .compatible = "altr,freeze-bridge-controller", }, ca24a648f535a0 drivers/fpga/altera-freeze-bridge.c Alan Tull 2016-11-01 203 {}, ca24a648f535a0 drivers/fpga/altera-freeze-bridge.c Alan Tull 2016-11-01 204 }; ca24a648f535a0 drivers/fpga/altera-freeze-bridge.c Alan Tull 2016-11-01 205 MODULE_DEVICE_TABLE(of, altera_freeze_br_of_match);
Quoted 5 lines
ca24a648f535a0drivers/fpga/altera-freeze-bridge.cAlan Tull 2016-11-01 206---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
I have a series to clean all of those up, I'll send it out tomorrow morning.
- Moritz
kernel test robot
build botRe: [PATCH v5 2/4] fpga: xilinx: reorganize to subdir layout
In reply to [email protected]I love your patch! Perhaps something to improve:
Hi,
I love your patch! Perhaps something to improve:
[auto build test WARNING on linus/master]
[also build test WARNING on v5.13 next-20210701]
[cannot apply to xlnx/master]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/trix-redhat-com/fpga-reorganize-to-subdirs/20210623-040811 base: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 0c18f29aae7ce3dadd26d8ee3505d07cc982df75 config: x86_64-randconfig-a016-20210705 (attached as .config) compiler: clang version 13.0.0 (https://github.com/llvm/llvm-project 3f9bf9f42a9043e20c6d2a74dd4f47a90a7e2b41)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# install x86_64 cross compiling tool for clang build
# apt-get install binutils-x86-64-linux-gnu
# https://github.com/0day-ci/linux/commit/d9e57cd01c49381771481c50a7705262d4980335
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review trix-redhat-com/fpga-reorganize-to-subdirs/20210623-040811 git checkout d9e57cd01c49381771481c50a7705262d4980335
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64
If you fix the issue, kindly add following tag as appropriate
All warnings (new ones prefixed by >>):
>> drivers/fpga/xilinx/xilinx-spi.c:259:34: warning: unused variable 'xlnx_spi_of_match' [-Wunused-const-variable]
static const struct of_device_id xlnx_spi_of_match[] = {
^1 warning generated.
vim +/xlnx_spi_of_match +259 drivers/fpga/xilinx/xilinx-spi.c
061c97d13f1a69 drivers/fpga/xilinx-spi.c Anatolij Gustschin 2017-03-23 258
061c97d13f1a69 drivers/fpga/xilinx-spi.c Anatolij Gustschin 2017-03-23 @259 static const struct of_device_id xlnx_spi_of_match[] = {
061c97d13f1a69 drivers/fpga/xilinx-spi.c Anatolij Gustschin 2017-03-23 260 { .compatible = "xlnx,fpga-slave-serial", },
061c97d13f1a69 drivers/fpga/xilinx-spi.c Anatolij Gustschin 2017-03-23 261 {}
061c97d13f1a69 drivers/fpga/xilinx-spi.c Anatolij Gustschin 2017-03-23 262 };
061c97d13f1a69 drivers/fpga/xilinx-spi.c Anatolij Gustschin 2017-03-23 263 MODULE_DEVICE_TABLE(of, xlnx_spi_of_match);061c97d13f1a69 drivers/fpga/xilinx-spi.c Anatolij Gustschin 2017-03-23 264
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org