Skip to contentSkip to conversation

qla2xxx: synchronize rport dev_loss_tmo setting

PATCH Superseded Daniel Wagner 1 participant 1 message Jul 2, 2021

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 qla2xxx: synchronize rport dev_loss_tmo setting

From: Hannes Reinecke <[email protected]>

Currently, the dev_loss_tmo setting is only ever used for SCSI devices. This patch reshuffles initialisation such that the SCSI remote ports are registered before the NVMe ones, allowing the dev_loss_tmo setting to be synchronized between SCSI and NVMe.

[lkp: Do not depend on nvme_fc_set_remoteport_devloss() for !NVME_FC]

---

This patch got some more testing by one of our partners. So far, no regression identified.

changes v2:
- fixed build failure for !NVME_FC reported by lkp

 drivers/scsi/qla2xxx/qla_attr.c |  6 ++++++
 drivers/scsi/qla2xxx/qla_init.c | 10 +++-------
 drivers/scsi/qla2xxx/qla_nvme.c |  5 ++++-
 3 files changed, 13 insertions(+), 8 deletions(-)
drivers/scsi/qla2xxx/qla_attr.c +6 -0
index 3aa9869f6fae..dad48a982804 100644
@@ -2648,7 +2648,13 @@ qla2x00_get_starget_port_id(struct scsi_target *starget)
 static inline void
 qla2x00_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout)
 {
+	fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
+
 	rport->dev_loss_tmo = timeout ? timeout : 1;
+
+	if (IS_ENABLED(CONFIG_NVME_FC) && fcport->nvme_remote_port)
+		nvme_fc_set_remoteport_devloss(fcport->nvme_remote_port,
+					       rport->dev_loss_tmo);
 }
 
 static void
drivers/scsi/qla2xxx/qla_init.c +3 -7
index 0de250570e39..d078f16933c0 100644
@@ -5631,13 +5631,6 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 
 	qla2x00_dfs_create_rport(vha, fcport);
 
-	if (NVME_TARGET(vha->hw, fcport)) {
-		qla_nvme_register_remote(vha, fcport);
-		qla2x00_set_fcport_disc_state(fcport, DSC_LOGIN_COMPLETE);
-		qla2x00_set_fcport_state(fcport, FCS_ONLINE);
-		return;
-	}
-
 	qla24xx_update_fcport_fcp_prio(vha, fcport);
 
 	switch (vha->host->active_mode) {
@@ -5659,6 +5652,9 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 		break;
 	}
 
+	if (NVME_TARGET(vha->hw, fcport))
+		qla_nvme_register_remote(vha, fcport);
+
 	qla2x00_set_fcport_state(fcport, FCS_ONLINE);
 
 	if (IS_IIDMA_CAPABLE(vha->hw) && vha->hw->flags.gpsc_supported) {
drivers/scsi/qla2xxx/qla_nvme.c +0 -0
index 0cacb667a88b..678083a34e4d 100644

@@ -41,7 +41,7 @@ int qla_nvme_register_remote(struct scsi_qla_host *vha, struct fc_port *fcport)
req.port_name = wwn_to_u64(fcport->port_name);
req.node_name = wwn_to_u64(fcport->node_name);
req.port_role = 0;
- req.dev_loss_tmo = 0;
+ req.dev_loss_tmo = fcport->dev_loss_tmo;

if (fcport->nvme_prli_service_param & NVME_PRLI_SP_INITIATOR)
req.port_role = FC_PORT_ROLE_NVME_INITIATOR;
@@ -68,6 +68,9 @@ int qla_nvme_register_remote(struct scsi_qla_host *vha, struct fc_port *fcport)
return ret;
}

+ nvme_fc_set_remoteport_devloss(fcport->nvme_remote_port,
+ fcport->dev_loss_tmo);
+
if (fcport->nvme_prli_service_param & NVME_PRLI_SP_SLER)
ql_log(ql_log_info, vha, 0x212a,
"PortID:%06x Supports SLER\n", req.port_id);

Signature · 1 line
2.29.2