Skip to contentSkip to conversation

habanalabs: missing mutex_unlock in process kill procedure

PATCH New Oded Gabbay 1 participant 7 messages Jul 11, 2021 Char and misc drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/7 habanalabs: missing mutex_unlock in process kill procedure

From: Ofir Bitton <[email protected]>

missing mutex unlock once driver is giving up killing user processes.

---
 drivers/misc/habanalabs/common/device.c | 1 +
 1 file changed, 1 insertion(+)
drivers/misc/habanalabs/common/device.c +1 -0
index 86426052a191..28fe15a28361 100644
@@ -822,6 +822,7 @@ static int device_kill_open_processes(struct hl_device *hdev, u32 timeout)
 		} else {
 			dev_warn(hdev->dev,
 				"Can't get task struct for PID so giving up on killing process\n");
+			mutex_unlock(&hdev->fpriv_list_lock);
 			return -ETIME;
 		}
 	}
Signature · 1 line
2.25.1
#1 lore raw

PATCH 2/7 habanalabs: rename cb_mmap to mmap

From: Zvika Yehudai <[email protected]>

This function will be used for more mmap operations than just mmaping CBs.

---
 drivers/misc/habanalabs/common/command_buffer.c | 2 +-
 drivers/misc/habanalabs/common/habanalabs.h     | 4 ++--
 drivers/misc/habanalabs/gaudi/gaudi.c           | 4 ++--
 drivers/misc/habanalabs/goya/goya.c             | 4 ++--
 4 files changed, 7 insertions(+), 7 deletions(-)
drivers/misc/habanalabs/common/command_buffer.c +1 -1
index 719168c980a4..58afefcd74f3 100644
@@ -552,7 +552,7 @@ int hl_cb_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma)
 
 	vma->vm_private_data = cb;
 
-	rc = hdev->asic_funcs->cb_mmap(hdev, vma, cb->kernel_address,
+	rc = hdev->asic_funcs->mmap(hdev, vma, cb->kernel_address,
 					cb->bus_address, cb->size);
 	if (rc) {
 		spin_lock(&cb->lock);
drivers/misc/habanalabs/common/habanalabs.h +2 -2
index 9aedea471ebe..6affad6bc1b9 100644
@@ -1024,7 +1024,7 @@ struct fw_load_mgr {
  *                hw_fini and before CS rollback.
  * @suspend: handles IP specific H/W or SW changes for suspend.
  * @resume: handles IP specific H/W or SW changes for resume.
- * @cb_mmap: maps a CB.
+ * @mmap: maps a memory.
  * @ring_doorbell: increment PI on a given QMAN.
  * @pqe_write: Write the PQ entry to the PQ. This is ASIC-specific
  *             function because the PQs are located in different memory areas
@@ -1143,7 +1143,7 @@ struct hl_asic_funcs {
 	void (*halt_engines)(struct hl_device *hdev, bool hard_reset);
 	int (*suspend)(struct hl_device *hdev);
 	int (*resume)(struct hl_device *hdev);
-	int (*cb_mmap)(struct hl_device *hdev, struct vm_area_struct *vma,
+	int (*mmap)(struct hl_device *hdev, struct vm_area_struct *vma,
 			void *cpu_addr, dma_addr_t dma_addr, size_t size);
 	void (*ring_doorbell)(struct hl_device *hdev, u32 hw_queue_id, u32 pi);
 	void (*pqe_write)(struct hl_device *hdev, __le64 *pqe,
drivers/misc/habanalabs/gaudi/gaudi.c +2 -2
index 7dd36d1cb39e..14d0f6d9a383 100644
@@ -4299,7 +4299,7 @@ static int gaudi_resume(struct hl_device *hdev)
 	return gaudi_init_iatu(hdev);
 }
 
-static int gaudi_cb_mmap(struct hl_device *hdev, struct vm_area_struct *vma,
+static int gaudi_mmap(struct hl_device *hdev, struct vm_area_struct *vma,
 			void *cpu_addr, dma_addr_t dma_addr, size_t size)
 {
 	int rc;
@@ -9313,7 +9313,7 @@ static const struct hl_asic_funcs gaudi_funcs = {
 	.halt_engines = gaudi_halt_engines,
 	.suspend = gaudi_suspend,
 	.resume = gaudi_resume,
-	.cb_mmap = gaudi_cb_mmap,
+	.mmap = gaudi_mmap,
 	.ring_doorbell = gaudi_ring_doorbell,
 	.pqe_write = gaudi_pqe_write,
 	.asic_dma_alloc_coherent = gaudi_dma_alloc_coherent,
drivers/misc/habanalabs/goya/goya.c +2 -2
index 4144a8445eef..017c913f7b5a 100644
@@ -2798,7 +2798,7 @@ int goya_resume(struct hl_device *hdev)
 	return goya_init_iatu(hdev);
 }
 
-static int goya_cb_mmap(struct hl_device *hdev, struct vm_area_struct *vma,
+static int goya_mmap(struct hl_device *hdev, struct vm_area_struct *vma,
 			void *cpu_addr, dma_addr_t dma_addr, size_t size)
 {
 	int rc;
@@ -5584,7 +5584,7 @@ static const struct hl_asic_funcs goya_funcs = {
 	.halt_engines = goya_halt_engines,
 	.suspend = goya_suspend,
 	.resume = goya_resume,
-	.cb_mmap = goya_cb_mmap,
+	.mmap = goya_mmap,
 	.ring_doorbell = goya_ring_doorbell,
 	.pqe_write = goya_pqe_write,
 	.asic_dma_alloc_coherent = goya_dma_alloc_coherent,
Signature · 1 line
2.25.1
#2 lore raw

PATCH 3/7 habanalabs: fix nullifying of destroyed mmu pgt pool

In reply to Oded Gabbay

From: Tomer Tayar <[email protected]>

In case of host-resident MMU, when the page tables pool is destroyed, its pointer is not nullified correctly.
As a result, on a device fini which happens after a failing reset, the already destroyed pool is accessed, which leads to a kernel panic. The patch fixes the setting of the pool pointer to NULL.

---
 drivers/misc/habanalabs/common/mmu/mmu_v1.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/misc/habanalabs/common/mmu/mmu_v1.c +6 -6
index c5e93ff32586..0f536f79dd9c 100644
@@ -470,13 +470,13 @@ static void hl_mmu_v1_fini(struct hl_device *hdev)
 	if (!ZERO_OR_NULL_PTR(hdev->mmu_priv.hr.mmu_shadow_hop0)) {
 		kvfree(hdev->mmu_priv.dr.mmu_shadow_hop0);
 		gen_pool_destroy(hdev->mmu_priv.dr.mmu_pgt_pool);
-	}
 
-	/* Make sure that if we arrive here again without init was called we
-	 * won't cause kernel panic. This can happen for example if we fail
-	 * during hard reset code at certain points
-	 */
-	hdev->mmu_priv.dr.mmu_shadow_hop0 = NULL;
+		/* Make sure that if we arrive here again without init was
+		 * called we won't cause kernel panic. This can happen for
+		 * example if we fail during hard reset code at certain points
+		 */
+		hdev->mmu_priv.dr.mmu_shadow_hop0 = NULL;
+	}
 }
 
 /**
Signature · 1 line
2.25.1
#3 lore raw

PATCH 4/7 habanalabs: mark linux image as not loaded after hw_fini

In reply to Oded Gabbay

From: Tomer Tayar <[email protected]>

If hard reset fails after the call to hw_fini and before loading the linux image to the device, a subsequent call to hw_fini should communicate via COMMS (or MSG_TO_CPU regs for old FW versions). However, the driver still tries in this case to communicate via the GIC, and thus no hard reset is actually done.
To avoid that, the patch clears the linux_loaded flag after every call to hw_fini.

---
 drivers/misc/habanalabs/common/device.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/misc/habanalabs/common/device.c +5 -0
index 28fe15a28361..4fcd24e5a609 100644
@@ -1075,9 +1075,12 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
 	hdev->asic_funcs->hw_fini(hdev, hard_reset);
 
 	if (hard_reset) {
+		hdev->fw_loader.linux_loaded = false;
+
 		/* Release kernel context */
 		if (hdev->kernel_ctx && hl_ctx_put(hdev->kernel_ctx) == 1)
 			hdev->kernel_ctx = NULL;
+
 		hl_vm_fini(hdev);
 		hl_mmu_fini(hdev);
 		hl_eq_reset(hdev, &hdev->event_queue);
@@ -1611,6 +1614,8 @@ void hl_device_fini(struct hl_device *hdev)
 	/* Reset the H/W. It will be in idle state after this returns */
 	hdev->asic_funcs->hw_fini(hdev, true);
 
+	hdev->fw_loader.linux_loaded = false;
+
 	/* Release kernel context */
 	if ((hdev->kernel_ctx) && (hl_ctx_put(hdev->kernel_ctx) != 1))
 		dev_err(hdev->dev, "kernel ctx is still alive\n");
Signature · 1 line
2.25.1
#4 lore raw

PATCH 5/7 habanalabs: fix type of variable

In reply to Oded Gabbay

Recently, the size parameter in userptr structure was change to u64. As a result, we need to change the type of the local range_size in device_va_to_pa() to u64 to avoid overflow.

---
 drivers/misc/habanalabs/common/debugfs.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/misc/habanalabs/common/debugfs.c +1 -2
index 51744e42b808..2c587af28f9b 100644
@@ -491,11 +491,10 @@ static int device_va_to_pa(struct hl_device *hdev, u64 virt_addr, u32 size,
 	struct hl_vm_phys_pg_pack *phys_pg_pack;
 	struct hl_ctx *ctx = hdev->compute_ctx;
 	struct hl_vm_hash_node *hnode;
+	u64 end_address, range_size;
 	struct hl_userptr *userptr;
 	enum vm_type *vm_type;
 	bool valid = false;
-	u64 end_address;
-	u32 range_size;
 	int i, rc = 0;
 
 	if (!ctx) {
Signature · 1 line
2.25.1
#5 lore raw

PATCH 6/7 habanalabs: add asic property of host dma offset

In reply to Oded Gabbay

Each ASIC can have a different offset to add to a host dma address, to enable the ASIC to access that host memory.

The usage for this can be common code so add this to the asic property structure.

---
 drivers/misc/habanalabs/common/habanalabs.h | 3 +++
 drivers/misc/habanalabs/gaudi/gaudi.c       | 1 +
 drivers/misc/habanalabs/goya/goya.c         | 1 +
 3 files changed, 5 insertions(+)
drivers/misc/habanalabs/common/habanalabs.h +3 -0
index 6affad6bc1b9..9782bb50931a 100644
@@ -434,6 +434,8 @@ struct hl_hints_range {
  *                  the device's MMU.
  * @dram_hints_align_mask: dram va hint addresses alignment mask which is used
  *                  for hints validity check.
+ * device_dma_offset_for_host_access: the offset to add to host DMA addresses
+ *                                    to enable the device to access them.
  * @mmu_pgt_size: MMU page tables total size.
  * @mmu_pte_size: PTE size in MMU page tables.
  * @mmu_hop_table_size: MMU hop table size.
@@ -527,6 +529,7 @@ struct asic_fixed_properties {
 	u64				cb_va_start_addr;
 	u64				cb_va_end_addr;
 	u64				dram_hints_align_mask;
+	u64				device_dma_offset_for_host_access;
 	u32				mmu_pgt_size;
 	u32				mmu_pte_size;
 	u32				mmu_hop_table_size;
drivers/misc/habanalabs/gaudi/gaudi.c +1 -0
index 14d0f6d9a383..fdbe8155ef3c 100644
@@ -537,6 +537,7 @@ static int gaudi_set_fixed_properties(struct hl_device *hdev)
 						get_collective_mode(hdev, i);
 	}
 
+	prop->device_dma_offset_for_host_access = HOST_PHYS_BASE;
 	prop->completion_queues_count = NUMBER_OF_CMPLT_QUEUES;
 	prop->collective_first_sob = 0;
 	prop->collective_first_mon = 0;
drivers/misc/habanalabs/goya/goya.c +1 -0
index 017c913f7b5a..ae9871928369 100644
@@ -389,6 +389,7 @@ int goya_set_fixed_properties(struct hl_device *hdev)
 		prop->hw_queues_props[i].cb_alloc_flags = CB_ALLOC_USER;
 	}
 
+	prop->device_dma_offset_for_host_access = HOST_PHYS_BASE;
 	prop->completion_queues_count = NUMBER_OF_CMPLT_QUEUES;
 
 	prop->dram_base_address = DRAM_PHYS_BASE;
Signature · 1 line
2.25.1
#6 lore raw

PATCH 7/7 habanalabs: set dma max segment size

In reply to Oded Gabbay

This is required from any device that is capable to perform DMA.

---
 drivers/misc/habanalabs/common/pci/pci.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/misc/habanalabs/common/pci/pci.c +2 -0
index d5bedf5ba011..0b5366cc84fd 100644
@@ -436,6 +436,8 @@ int hl_pci_init(struct hl_device *hdev)
 		goto unmap_pci_bars;
 	}
 
+	dma_set_max_seg_size(&pdev->dev, U32_MAX);
+
 	return 0;
 
 unmap_pci_bars:
Signature · 1 line
2.25.1