README: Update toolchain information

index b296f00..b0246fc 100644
@@ -104,6 +104,12 @@ LLVM/Clang toolchain due to LLVM's ability to support multiple backends in the
 same binary, so is often an easy way to obtain a working cross-compilation
 toolchain.
 
+Basically, we prefer toolchains with PIE support like *riscv64-linux-gcc* as
+it generates Position Independent Executable firmware images that can run at
+arbitrary address with appropriate alignment. If a bare-metal toolchain (e.g.
+*riscv64-unknown-elf-gcc*) is used, static linked firmware images are generated
+instead.
+
 Please note that only a 64-bit version of the toolchain is available in
 the Bootlin toolchain repository for now.
 

@@ -116,7 +122,7 @@ architecture than RISC-V.
 
 For cross-compiling, the environment variable *CROSS_COMPILE* must be defined
 to specify the name prefix of the RISC-V compiler toolchain executables, e.g.
-*riscv64-unknown-elf-* if the gcc executable used is *riscv64-unknown-elf-gcc*.
+*riscv64-linux-* if the gcc executable used is *riscv64-linux-gcc*.
 
 To build *libsbi.a* simply execute:
 ```

@@ -192,16 +198,16 @@ Building 32-bit / 64-bit OpenSBI Images
 ---------------------------------------
 By default, building OpenSBI generates 32-bit or 64-bit images based on the
 supplied RISC-V cross-compile toolchain. For example if *CROSS_COMPILE* is set
-to *riscv64-unknown-elf-*, 64-bit OpenSBI images will be generated. If building
+to *riscv64-linux-*, 64-bit OpenSBI images will be generated. If building
 32-bit OpenSBI images, *CROSS_COMPILE* should be set to a toolchain that is
-pre-configured to generate 32-bit RISC-V codes, like *riscv32-unknown-elf-*.
+pre-configured to generate 32-bit RISC-V codes, like *riscv32-linux-*.
 
 However it's possible to explicitly specify the image bits we want to build with
 a given RISC-V toolchain. This can be done by setting the environment variable
 *PLATFORM_RISCV_XLEN* to the desired width, for example:
 
 ```
-export CROSS_COMPILE=riscv64-unknown-elf-
+export CROSS_COMPILE=riscv64-linux-
 export PLATFORM_RISCV_XLEN=32
 ```
 

@@ -235,7 +241,7 @@ valid triple.
 These can also be mixed; for example using a GCC cross-compiler but LLVM
 binutils would be:
 ```
-make CC=riscv64-unknown-elf-gcc LLVM=1
+make CC=riscv64-linux-gcc LLVM=1
 ```
 
 These variables must be passed for all the make invocations described in this