Add LaCie Rugged USB3-FW to IGNORE_UAS

LaCie Rugged USB3-FW appears to be incompatible with UAS. It generates errors like:

[ 1151.582598] sd 14:0:0:0: tag#16 uas_eh_abort_handler 0 uas-tag 1 inflight: IN
[ 1151.582602] sd 14:0:0:0: tag#16 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00
[ 1151.588594] scsi host14: uas_eh_device_reset_handler start
[ 1151.710482] usb 2-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1151.741398] scsi host14: uas_eh_device_reset_handler success
[ 1181.785534] scsi host14: uas_eh_device_reset_handler start

---
 drivers/usb/storage/unusual_uas.h | 7 +++++++
 1 file changed, 7 insertions(+)

index f9677a5ec31b..c35a6db993f1 100644
@@ -45,6 +45,13 @@ UNUSUAL_DEV(0x059f, 0x105f, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME),
 
+/* Reported-by: Julian Sikorski <[email protected]> */
+UNUSUAL_DEV(0x059f, 0x1061, 0x0000, 0x9999,
+		"LaCie",
+		"Rugged USB3-FW",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_UAS),
+
 /*
  * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI
  * commands in UAS mode.  Observed with the 1.28 firmware; are there others?

2.31.1