Skip to contentSkip to conversation

tracing/histogram: Rename "cpu" to "common_cpu"

PATCH In review Steven Rostedt 2 participants 2 messages Jul 21, 2021

Subsystems (2)
lore
Share & tools
lore

Steven Rostedt

author maintainer
#0 lore raw

PATCH v3 1/1 tracing/histogram: Rename "cpu" to "common_cpu"

From: "Steven Rostedt (VMware)" <[email protected]>

Currently the histogram logic allows the user to write "cpu" in as an event field, and it will record the CPU that the event happened on.

The problem with this is that there's a lot of events that have "cpu" as a real field, and using "cpu" as the CPU it ran on, makes it impossible to run histograms on the "cpu" field of events.

For example, if I want to have a histogram on the count of the workqueue_queue_work event on its cpu field, running:

Quoted 1 line
# echo 'hist:keys=cpu' > events/workqueue/workqueue_queue_work/trigger

Gives a misleading and wrong result.

Change the command to "common_cpu" as no event should have "common_*" fields as that's a reserved name for fields used by all events. And this makes sense here as common_cpu would be a field used by all events.

Now we can even do:

Quoted 2 lines
# echo 'hist:keys=common_cpu,cpu if cpu < 100' > events/workqueue/workqueue_queue_work/trigger
# cat events/workqueue/workqueue_queue_work/hist
 # event histogram
 #
 # trigger info: hist:keys=common_cpu,cpu:vals=hitcount:sort=hitcount:size=2048 if cpu < 100 [active]
 #
 { common_cpu:          0, cpu:          2 } hitcount:          1
 { common_cpu:          0, cpu:          4 } hitcount:          1
 { common_cpu:          7, cpu:          7 } hitcount:          1
 { common_cpu:          0, cpu:          7 } hitcount:          1
 { common_cpu:          0, cpu:          1 } hitcount:          1
 { common_cpu:          0, cpu:          6 } hitcount:          2
 { common_cpu:          0, cpu:          5 } hitcount:          2
 { common_cpu:          1, cpu:          1 } hitcount:          4
 { common_cpu:          6, cpu:          6 } hitcount:          4
 { common_cpu:          5, cpu:          5 } hitcount:         14
 { common_cpu:          4, cpu:          4 } hitcount:         26
 { common_cpu:          0, cpu:          0 } hitcount:         39
 { common_cpu:          2, cpu:          2 } hitcount:        184

Now for backward compatibility, I added a trick. If "cpu" is used, and the field is not found, it will fall back to "common_cpu" and work as it did before. This way, it will still work for old programs that use "cpu" to get the actual CPU, but if the event has a "cpu" as a field, it will get that event's "cpu" field, which is probably what it wants anyway.

I updated the tracefs/README to include documentation about both the common_timestamp and the common_cpu. This way, if that text is present in the README, then an application can know that common_cpu is supported over just plain "cpu".

Fixes 8b7622bf94a44 ("tracing: Add cpu field for hist triggers")

---
Changes since v2:
compile tested :-p and found I missed a '"' in the README.

 Documentation/trace/histogram.rst |  2 +-
 kernel/trace/trace.c              |  4 ++++
 kernel/trace/trace_events_hist.c  | 22 ++++++++++++++++------
 3 files changed, 21 insertions(+), 7 deletions(-)
Documentation/trace/histogram.rst +1 -1
index b71e09f745c3..f99be8062bc8 100644
@@ -191,7 +191,7 @@ Documentation written by Tom Zanussi
                                 with the event, in nanoseconds.  May be
 			        modified by .usecs to have timestamps
 			        interpreted as microseconds.
-    cpu                    int  the cpu on which the event occurred.
+    common_cpu             int  the cpu on which the event occurred.
     ====================== ==== =======================================
 
 Extended error information
kernel/trace/trace.c +4 -0
index 14f56e9fa001..e6074040c977 100644
@@ -5619,6 +5619,10 @@ static const char readme_msg[] =
 	"\t            [:name=histname1]\n"
 	"\t            [:<handler>.<action>]\n"
 	"\t            [if <filter>]\n\n"
+	"\t    Note, special fields can be used as well:\n"
+	"\t            common_timestamp - to record current timestamp\n"
+	"\t            common_cpu - to record the CPU the event happened on\n"
+	"\n"
 	"\t    When a matching event is hit, an entry is added to a hash\n"
 	"\t    table using the key(s) and value(s) named, and the value of a\n"
 	"\t    sum called 'hitcount' is incremented.  Keys and values\n"
kernel/trace/trace_events_hist.c +16 -6
index 16a9dfc9fffc..34325f41ebc0 100644
@@ -1111,7 +1111,7 @@ static const char *hist_field_name(struct hist_field *field,
 		 field->flags & HIST_FIELD_FL_ALIAS)
 		field_name = hist_field_name(field->operands[0], ++level);
 	else if (field->flags & HIST_FIELD_FL_CPU)
-		field_name = "cpu";
+		field_name = "common_cpu";
 	else if (field->flags & HIST_FIELD_FL_EXPR ||
 		 field->flags & HIST_FIELD_FL_VAR_REF) {
 		if (field->system) {
@@ -1991,14 +1991,24 @@ parse_field(struct hist_trigger_data *hist_data, struct trace_event_file *file,
 		hist_data->enable_timestamps = true;
 		if (*flags & HIST_FIELD_FL_TIMESTAMP_USECS)
 			hist_data->attrs->ts_in_usecs = true;
-	} else if (strcmp(field_name, "cpu") == 0)
+	} else if (strcmp(field_name, "common_cpu") == 0)
 		*flags |= HIST_FIELD_FL_CPU;
 	else {
 		field = trace_find_event_field(file->event_call, field_name);
 		if (!field || !field->size) {
-			hist_err(tr, HIST_ERR_FIELD_NOT_FOUND, errpos(field_name));
-			field = ERR_PTR(-EINVAL);
-			goto out;
+			/*
+			 * For backward compatibility, if field_name
+			 * was "cpu", then we treat this the same as
+			 * common_cpu.
+			 */
+			if (strcmp(field_name, "cpu") == 0) {
+				*flags |= HIST_FIELD_FL_CPU;
+			} else {
+				hist_err(tr, HIST_ERR_FIELD_NOT_FOUND,
+					 errpos(field_name));
+				field = ERR_PTR(-EINVAL);
+				goto out;
+			}
 		}
 	}
  out:
@@ -5085,7 +5095,7 @@ static void hist_field_print(struct seq_file *m, struct hist_field *hist_field)
 		seq_printf(m, "%s=", hist_field->var.name);
 
 	if (hist_field->flags & HIST_FIELD_FL_CPU)
-		seq_puts(m, "cpu");
+		seq_puts(m, "common_cpu");
 	else if (field_name) {
 		if (hist_field->flags & HIST_FIELD_FL_VAR_REF ||
 		    hist_field->flags & HIST_FIELD_FL_ALIAS)
Signature · 1 line
2.31.1
Reviewed-by on v3 1/1
#1 lore raw

Hi Steve,

Quoted 9 lines · Steven Rostedt

From: "Steven Rostedt (VMware)" <[email protected]>

Currently the histogram logic allows the user to write "cpu" in as an event field, and it will record the CPU that the event happened on.

The problem with this is that there's a lot of events that have "cpu" as a real field, and using "cpu" as the CPU it ran on, makes it impossible to run histograms on the "cpu" field of events.

Yes, you're absolutely right, it should have been named "common_cpu" from the start, not only for this reason but also just for the sake of consistency.