Add support UHS-II for GL9755
cover Add support UHS-II for GL9755
Summary
=======
In these patches we focus on uhs2 side to address Ulf's suggestion which was mentioned in patch [mmc: core: Preparations to support SD UHS-II cards].
I moved codes in uhs2.c to proper functions in sd_uhs2.c, which should meet Ulf's expection.
Please review this series (particularly Patch 29/29).
Thanks.
-Jason Lai
------ original cover letter from v3 ------
This is an interim snapshot of our next version, v4, for enabling UHS-II on MMC/SD.
It is focused on 'sdhci' side to address Adrian's comments regarding "modularising" sdhci-uhs2.c.
The whole aim of this version is to get early feedback from Adrian (and others) on this issue. Without any consensus about the code structure, it would make little sense to go further ahead on sdhci side. (Actually, Adrian has made no comments other than "modularising" so far.)
I heavily reworked/refactored sdhci-uhs2.c and re-organised the patch set to meet what I believe Adrian expects; no UHS-II related code in Legacy (UHS-I) code or sdhci.c.
Nevertheless, almost of all changes I made are trivial and straightforward in this direction, and I believe that there is no logic changed since v3 except sdhci_uhs2_irq(), as ops->irq hook, where we must deal with UHS-II command sequences in addition to UHS-II errors. So I added extra handlings.
I admit that there is plenty of room for improvements (for example, handling host->flags), but again the focal point here is how sdhci-uhs2.c should be built as a module.
Please review this series (particularly Patch#8-#26 and #27) from this viewpoint in the first place.
(Ben is working on 'host' side but there is no change on 'host' side in this submission except a minor tweak.)
Thanks,
-Takahiro Akashi
------ original cover letter from v3 ------
Summary
=======
These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.
About UHS-II, roughly deal with the following three parts:
1) A UHS-II detection and initialization:
- Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence [2]).
- Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]).
- In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register Setup Sequence.
2) Send Legacy SD command through SD-TRAN
- Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet Types and Format Overview[3]).
- Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
3) UHS-II Interrupt
- Except for UHS-II error interrupts, most interrupts share the original interrupt registers.
Patch structure
===============
patch#1-#7: for core
patch#8-#17: for sdhci
patch#18-#21: for GL9755
Tests
=====
Ran 'dd' command to evaluate the performance:
(SanDisk UHS-II card on GL9755 controller)
Read Write
UHS-II disabled (UHS-I): 88.3MB/s 60.7MB/s
UHS-II enabled : 206MB/s 80MB/s
TODO
====
- replace some define with BIT macro
Reference
=========
[1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git
[2] SD Host Controller Simplified Specification 4.20
[3] UHS-II Simplified Addendum 1.02
Changes in v3 (Jul. 10, 2020)
* rebased to v5.8-rc4
* add copyright notice
* reorganize the patch set and split some commits into smaller ones
* separate uhs-2 headers from others
* correct wrong spellings
* fix most of checkpatch warnings/errors
* remove all k[cz]alloc() from the code
* guard sdhci-uhs2 specific code with
'if (IS_ENABLED(CONFIG_MMC_SDHCI_UHS2))'
* make sdhci-uhs2.c as a module
* trivial changes, including
- rename back sdhci-core.c to sdhci.c
- allow vendor code to disable uhs2 if v4_mode == 0
in __sdhci_add_host()
- merge uhs2_power_up() into mmc_power_up()
- remove flag_uhs2 from mmc_attach_sd()
- add function descriptions to EXPORT'ed functions
- other minor code optimization
Changes in v2 (Jan. 9, 2020)
* rebased to v5.5-rc5
AKASHI Takahiro (23):
mmc: core: UHS-II support, modify power-up sequence
mmc: core: UHS-II support, skip set_chip_select()
mmc: core: UHS-II support, skip TMODE setup in some cases
mmc: core: UHS-II support, generate UHS-II SD command packet
mmc: core: UHS-II support, set APP_CMD bit if necessary
mmc: sdhci: add a kernel configuration for enabling UHS-II support
mmc: sdhci: add UHS-II related definitions in headers
mmc: sdhci: add UHS-II module
mmc: sdhci-uhs2: dump UHS-II registers
mmc: sdhci-uhs2: add reset function
mmc: sdhci-uhs2: add set_power() to support vdd2
mmc: sdhci-uhs2: skip signal_voltage_switch()
mmc: sdhci-uhs2: add set_timeout()
mmc: sdhci-uhs2: add set_ios()
mmc: sdhci-uhs2: add detect_init() to detect the interface
mmc: sdhci-uhs2: add clock operations
mmc: sdhci-uhs2: add set_reg() to initialise the interface
mmc: sdhci-uhs2: add request() and others
mmc: sdhci-uhs2: add irq() and others
mmc: sdhci-uhs2: add add_host() and others to set up the driver
mmc: core: add post-mmc_attach_sd hook
mmc: sdhci-pci: add UHS-II support framework
mmc: sdhci-pci-gli: enable UHS-II mode for GL9755
Ben Chuang (4):
mmc: add UHS-II related definitions in public headers
mmc: core: UHS-II support, try to select UHS-II interface
mmc: sdhci-uhs2: add pre-detect_init hook
mmc: sdhci-uhs2: add post-mmc_attach_sd hook
drivers/mmc/core/Makefile | 2 +- drivers/mmc/core/block.c | 7 +- drivers/mmc/core/bus.c | 5 +- drivers/mmc/core/core.c | 118 +- drivers/mmc/core/regulator.c | 14 + drivers/mmc/core/sd.c | 32 + drivers/mmc/core/sd_ops.c | 12 + drivers/mmc/core/uhs2.c | 883 +++++++++++++++ drivers/mmc/core/uhs2.h | 21 + drivers/mmc/host/Kconfig | 10 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-pci-core.c | 16 +- drivers/mmc/host/sdhci-pci-gli.c | 318 +++++- drivers/mmc/host/sdhci-pci.h | 3 + drivers/mmc/host/sdhci-uhs2.c | 1697 +++++++++++++++++++++++++++++ drivers/mmc/host/sdhci-uhs2.h | 224 ++++ drivers/mmc/host/sdhci.c | 333 +++--- drivers/mmc/host/sdhci.h | 117 +- include/linux/mmc/card.h | 1 + include/linux/mmc/core.h | 6 + include/linux/mmc/host.h | 31 + include/linux/mmc/uhs2.h | 268 +++++ 22 files changed, 3961 insertions(+), 158 deletions(-) create mode 100644 drivers/mmc/core/uhs2.c create mode 100644 drivers/mmc/core/uhs2.h create mode 100644 drivers/mmc/host/sdhci-uhs2.c create mode 100644 drivers/mmc/host/sdhci-uhs2.h create mode 100644 include/linux/mmc/uhs2.h
Quoted 11 lines · Jason Lai
Summary
=======
In these patches we focus on uhs2 side to address Ulf's suggestion which was mentioned in patch [mmc: core: Preparations to support SD UHS-II cards].I moved codes in
uhs2.cto proper functions insd_uhs2.c, which should meet Ulf's expection.Please review this series (particularly Patch 29/29).
I think you have misunderstood the intent with the series that I posted [1] a while ago. The idea was to add the foundation of what should be needed in the mmc core to support UHS-II cards. Note, it's only the foundation, not the complete code.
In other words, I think you should base the next version of $subject series *on top* of my series [1], rather than the opposite.
Moreover, next time, please try to better describe in each changelog and in a cover letter what you have changed and why, as it helps me to review.
Kind regards
Uffe
[1]
https://patchwork.kernel.org/project/linux-mmc/list/?series=438509
Quoted 167 lines
Thanks.
-Jason Lai------ original cover letter from v3 ------
This is an interim snapshot of our next version, v4, for enabling UHS-II on MMC/SD.It is focused on 'sdhci' side to address Adrian's comments regarding "modularising"
sdhci-uhs2.c.
The whole aim of this version is to get early feedback from Adrian (and others) on this issue. Without any consensus about the code structure, it would make little sense to go further ahead on sdhci side. (Actually, Adrian has made no comments other than "modularising" so far.)I heavily reworked/refactored
sdhci-uhs2.cand re-organised the patch set to meet what I believe Adrian expects; no UHS-II related code in Legacy (UHS-I) code orsdhci.c.Nevertheless, almost of all changes I made are trivial and straightforward in this direction, and I believe that there is no logic changed since v3 except
sdhci_uhs2_irq(), asops->irqhook, where we must deal with UHS-II command sequences in addition to UHS-II errors. So I added extra handlings.I admit that there is plenty of room for improvements (for example, handling
host->flags), but again the focal point here is howsdhci-uhs2.cshould be built as a module.Please review this series (particularly Patch#8-#26 and #27) from this viewpoint in the first place.
(Ben is working on 'host' side but there is no change on 'host' side in this submission except a minor tweak.)Thanks,
-Takahiro Akashi------ original cover letter from v3 ------
Summary
=======
These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.About UHS-II, roughly deal with the following three parts:
1) A UHS-II detection and initialization:
- Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence [2]).
- Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]).
- In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register Setup Sequence.2) Send Legacy SD command through SD-TRAN
- Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet Types and Format Overview[3]).
- Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).3) UHS-II Interrupt
- Except for UHS-II error interrupts, most interrupts share the original interrupt registers.Patch structure
===============
patch#1-#7: for core
patch#8-#17: for sdhci
patch#18-#21: for GL9755Tests
=====
Ran 'dd' command to evaluate the performance:
(SanDisk UHS-II card on GL9755 controller)
Read Write
UHS-II disabled (UHS-I): 88.3MB/s 60.7MB/s
UHS-II enabled : 206MB/s 80MB/sTODO
====
- replace some define with BIT macroReference
=========
[1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git
[2] SD Host Controller Simplified Specification 4.20
[3] UHS-II Simplified Addendum 1.02Changes in v3 (Jul. 10, 2020)
* rebased to v5.8-rc4
* add copyright notice
* reorganize the patch set and split some commits into smaller ones
* separate uhs-2 headers from others
* correct wrong spellings
* fix most of checkpatch warnings/errors
* remove all k[cz]alloc() from the code
* guard sdhci-uhs2 specific code with'if (IS_ENABLED(CONFIG_MMC_SDHCI_UHS2))'* make
sdhci-uhs2.cas a module
* trivial changes, including
- rename backsdhci-core.ctosdhci.c
- allow vendor code to disable uhs2 ifv4_mode== 0in __sdhci_add_host()- merge
uhs2_power_up()intommc_power_up()
- removeflag_uhs2frommmc_attach_sd()
- add function descriptions to EXPORT'ed functions
- other minor code optimizationChanges in v2 (Jan. 9, 2020)
* rebased to v5.5-rc5AKASHI Takahiro (23):
mmc: core: UHS-II support, modify power-up sequence
mmc: core: UHS-II support, skipset_chip_select()
mmc: core: UHS-II support, skip TMODE setup in some cases
mmc: core: UHS-II support, generate UHS-II SD command packet
mmc: core: UHS-II support, setAPP_CMDbit if necessary
mmc: sdhci: add a kernel configuration for enabling UHS-II support
mmc: sdhci: add UHS-II related definitions in headers
mmc: sdhci: add UHS-II module
mmc: sdhci-uhs2: dump UHS-II registers
mmc: sdhci-uhs2: add reset function
mmc: sdhci-uhs2: addset_power()to support vdd2
mmc: sdhci-uhs2: skipsignal_voltage_switch()
mmc: sdhci-uhs2: addset_timeout()
mmc: sdhci-uhs2: addset_ios()
mmc: sdhci-uhs2: adddetect_init()to detect the interface
mmc: sdhci-uhs2: add clock operations
mmc: sdhci-uhs2: addset_reg()to initialise the interface
mmc: sdhci-uhs2: addrequest()and others
mmc: sdhci-uhs2: addirq()and others
mmc: sdhci-uhs2: addadd_host()and others to set up the driver
mmc: core: add post-mmc_attach_sd hook
mmc: sdhci-pci: add UHS-II support framework
mmc: sdhci-pci-gli: enable UHS-II mode for GL9755Ben Chuang (4):
mmc: add UHS-II related definitions in public headers
mmc: core: UHS-II support, try to select UHS-II interface
mmc: sdhci-uhs2: add pre-detect_init hook
mmc: sdhci-uhs2: add post-mmc_attach_sd hookdrivers/mmc/core/Makefile | 2 +- drivers/mmc/core/block.c | 7 +- drivers/mmc/core/bus.c | 5 +- drivers/mmc/core/core.c | 118 +- drivers/mmc/core/regulator.c | 14 + drivers/mmc/core/sd.c | 32 + drivers/mmc/core/sd_ops.c | 12 + drivers/mmc/core/uhs2.c | 883 +++++++++++++++ drivers/mmc/core/uhs2.h | 21 + drivers/mmc/host/Kconfig | 10 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-pci-core.c | 16 +- drivers/mmc/host/sdhci-pci-gli.c | 318 +++++- drivers/mmc/host/sdhci-pci.h | 3 + drivers/mmc/host/sdhci-uhs2.c | 1697 +++++++++++++++++++++++++++++ drivers/mmc/host/sdhci-uhs2.h | 224 ++++ drivers/mmc/host/sdhci.c | 333 +++--- drivers/mmc/host/sdhci.h | 117 +- include/linux/mmc/card.h | 1 + include/linux/mmc/core.h | 6 + include/linux/mmc/host.h | 31 + include/linux/mmc/uhs2.h | 268 +++++ 22 files changed, 3961 insertions(+), 158 deletions(-) create mode 100644 drivers/mmc/core/uhs2.c create mode 100644 drivers/mmc/core/uhs2.h create mode 100644 drivers/mmc/host/sdhci-uhs2.c create mode 100644 drivers/mmc/host/sdhci-uhs2.h create mode 100644 include/linux/mmc/uhs2.h
Quoted 14 lines · Ulf Hansson
Quoted 11 lines · Jason Lai
Summary
=======
In these patches we focus on uhs2 side to address Ulf's suggestion which was mentioned in patch [mmc: core: Preparations to support SD UHS-II cards].I moved codes in
uhs2.cto proper functions insd_uhs2.c, which should meet Ulf's expection.Please review this series (particularly Patch 29/29).
Quoted 8 lines
I think you have misunderstood the intent with the series that I posted [1] a while ago. The idea was to add the foundation of what should be needed in the mmc core to support UHS-II cards. Note, it's only the foundation, not the complete code.
In other words, I think you should base the next version of $subject series *on top* of my series [1], rather than the opposite.
Actually, I understand your intention is to implement functions which can be applied to control all UHS-II cards.
However, why do I choose to base it on “[RFC,v3.1,00/27] Add support UHS-II for GL9755”?
Because it contains a complete UHS-II interface(both host & card side) and UHS-II card can work normally.
The functionality of uhs2.c in the previous version of $subject almost equal to sd_uhs2.c in your series [1].
The only difference is that UHS-II card initialization flow had been modulated according to different phases(detect / phy_init / legacy_init…).
Hence, I decided to apply your architecture of sd_uhs2.c to uhs2.c and rename uhs2.c to sd_uhs2.c.
All patches are briefed below:
1. Patch #1 to patch #26 are used to create a UHS-II interface, both in host side and sd card side.
- patch#1: add UHS-II support in public headers. (include/linux/mmc).
- patch#2: add UHS-II relative features in mmc_power_up() /mmc_power_off() / mmc_regulator_get_supply().
- patch#3: skip set_chip_select().
- patch#4: flow of “interface selection and initialization” was a
bit modified for UHS-II card.
- patch#5: skip TMODE(field of UHS-II command packet) setup in some cases.
- patch#6 - #7: generate UHS-II SD command packet.
- patch#8: add a kernel configuration for enabling UHS-II support.
- patch#9: add UHS-II related definitions in sdhci.h and sdhci-uhs2.h.
- patch#10: add sdhci-uhs2.c as a module for UHS-II support.
- patch#11: dump UHS-II registers
- patch#12 - #26: add UHS-II host setting / control / attach,card detect / attach.
2. Patch #27: drivers/mmc/host/sdhci-pci-gli.c contains vendor(Genesyslogic) specific operations which are related to hardware control.
3. Patch #28: remove redundant code.
4. Patch #29: move code from uhs2.c to sd_uhs2.c and place them to proper functions.
Quoted 3 lines
Moreover, next time, please try to better describe in each changelog and in a cover letter what you have changed and why, as it helps me to review.
Okay.
So what is the next you suggest to do after my explanation?
1. Update cover letter & change note in current version of $subject.
2. Submit a new version on top of your series [1].
For example: Series “Add Support UHS-II for GL9755“ patch #1~#4 are your original series[1] and patch #33 is to apply
your patch to support UHS-II cards. Below is the patch list:
[0/33] mmc: core: Add Support UHS-II for GL9755
[1/33] mmc: core: Cleanup printing of speed mode at card insertion [2/33] mmc: core: Prepare to support SD UHS-II cards [3/33] mmc: core: Announce successful insertion of an SD UHS-II card [4/33] mmc: core: Extend support for mmc regulators with a vqmmc2 [5/33] mmc: add UHS-II related definitions in public headers [6/33] mmc: core: UHS-II support, modify power-up sequence ……
[33/33] mmc: core: Apply Ulf's patch for supporting UHS-II car
Kind regards,
Jason Lai
Quoted 165 lines
Kind regards
Uffe[1]
https://patchwork.kernel.org/project/linux-mmc/list/?series=438509Quoted 159 lines
Thanks.
-Jason Lai------ original cover letter from v3 ------
This is an interim snapshot of our next version, v4, for enabling UHS-II on MMC/SD.It is focused on 'sdhci' side to address Adrian's comments regarding "modularising"
sdhci-uhs2.c.
The whole aim of this version is to get early feedback from Adrian (and others) on this issue. Without any consensus about the code structure, it would make little sense to go further ahead on sdhci side. (Actually, Adrian has made no comments other than "modularising" so far.)I heavily reworked/refactored
sdhci-uhs2.cand re-organised the patch set to meet what I believe Adrian expects; no UHS-II related code in Legacy (UHS-I) code orsdhci.c.Nevertheless, almost of all changes I made are trivial and straightforward in this direction, and I believe that there is no logic changed since v3 except
sdhci_uhs2_irq(), asops->irqhook, where we must deal with UHS-II command sequences in addition to UHS-II errors. So I added extra handlings.I admit that there is plenty of room for improvements (for example, handling
host->flags), but again the focal point here is howsdhci-uhs2.cshould be built as a module.Please review this series (particularly Patch#8-#26 and #27) from this viewpoint in the first place.
(Ben is working on 'host' side but there is no change on 'host' side in this submission except a minor tweak.)Thanks,
-Takahiro Akashi------ original cover letter from v3 ------
Summary
=======
These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.About UHS-II, roughly deal with the following three parts:
1) A UHS-II detection and initialization:
- Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence [2]).
- Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]).
- In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register Setup Sequence.2) Send Legacy SD command through SD-TRAN
- Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet Types and Format Overview[3]).
- Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).3) UHS-II Interrupt
- Except for UHS-II error interrupts, most interrupts share the original interrupt registers.Patch structure
===============
patch#1-#7: for core
patch#8-#17: for sdhci
patch#18-#21: for GL9755Tests
=====
Ran 'dd' command to evaluate the performance:
(SanDisk UHS-II card on GL9755 controller)
Read Write
UHS-II disabled (UHS-I): 88.3MB/s 60.7MB/s
UHS-II enabled : 206MB/s 80MB/sTODO
====
- replace some define with BIT macroReference
=========
[1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git
[2] SD Host Controller Simplified Specification 4.20
[3] UHS-II Simplified Addendum 1.02Changes in v3 (Jul. 10, 2020)
* rebased to v5.8-rc4
* add copyright notice
* reorganize the patch set and split some commits into smaller ones
* separate uhs-2 headers from others
* correct wrong spellings
* fix most of checkpatch warnings/errors
* remove all k[cz]alloc() from the code
* guard sdhci-uhs2 specific code with'if (IS_ENABLED(CONFIG_MMC_SDHCI_UHS2))'* make
sdhci-uhs2.cas a module
* trivial changes, including
- rename backsdhci-core.ctosdhci.c
- allow vendor code to disable uhs2 ifv4_mode== 0in __sdhci_add_host()- merge
uhs2_power_up()intommc_power_up()
- removeflag_uhs2frommmc_attach_sd()
- add function descriptions to EXPORT'ed functions
- other minor code optimizationChanges in v2 (Jan. 9, 2020)
* rebased to v5.5-rc5AKASHI Takahiro (23):
mmc: core: UHS-II support, modify power-up sequence
mmc: core: UHS-II support, skipset_chip_select()
mmc: core: UHS-II support, skip TMODE setup in some cases
mmc: core: UHS-II support, generate UHS-II SD command packet
mmc: core: UHS-II support, setAPP_CMDbit if necessary
mmc: sdhci: add a kernel configuration for enabling UHS-II support
mmc: sdhci: add UHS-II related definitions in headers
mmc: sdhci: add UHS-II module
mmc: sdhci-uhs2: dump UHS-II registers
mmc: sdhci-uhs2: add reset function
mmc: sdhci-uhs2: addset_power()to support vdd2
mmc: sdhci-uhs2: skipsignal_voltage_switch()
mmc: sdhci-uhs2: addset_timeout()
mmc: sdhci-uhs2: addset_ios()
mmc: sdhci-uhs2: adddetect_init()to detect the interface
mmc: sdhci-uhs2: add clock operations
mmc: sdhci-uhs2: addset_reg()to initialise the interface
mmc: sdhci-uhs2: addrequest()and others
mmc: sdhci-uhs2: addirq()and others
mmc: sdhci-uhs2: addadd_host()and others to set up the driver
mmc: core: add post-mmc_attach_sd hook
mmc: sdhci-pci: add UHS-II support framework
mmc: sdhci-pci-gli: enable UHS-II mode for GL9755Ben Chuang (4):
mmc: add UHS-II related definitions in public headers
mmc: core: UHS-II support, try to select UHS-II interface
mmc: sdhci-uhs2: add pre-detect_init hook
mmc: sdhci-uhs2: add post-mmc_attach_sd hookdrivers/mmc/core/Makefile | 2 +- drivers/mmc/core/block.c | 7 +- drivers/mmc/core/bus.c | 5 +- drivers/mmc/core/core.c | 118 +- drivers/mmc/core/regulator.c | 14 + drivers/mmc/core/sd.c | 32 + drivers/mmc/core/sd_ops.c | 12 + drivers/mmc/core/uhs2.c | 883 +++++++++++++++ drivers/mmc/core/uhs2.h | 21 + drivers/mmc/host/Kconfig | 10 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-pci-core.c | 16 +- drivers/mmc/host/sdhci-pci-gli.c | 318 +++++- drivers/mmc/host/sdhci-pci.h | 3 + drivers/mmc/host/sdhci-uhs2.c | 1697 +++++++++++++++++++++++++++++ drivers/mmc/host/sdhci-uhs2.h | 224 ++++ drivers/mmc/host/sdhci.c | 333 +++--- drivers/mmc/host/sdhci.h | 117 +- include/linux/mmc/card.h | 1 + include/linux/mmc/core.h | 6 +
Quoted 8 lines
Quoted 8 lines
include/linux/mmc/host.h | 31 + include/linux/mmc/uhs2.h | 268 +++++ 22 files changed, 3961 insertions(+), 158 deletions(-) create mode 100644 drivers/mmc/core/uhs2.c create mode 100644 drivers/mmc/core/uhs2.h create mode 100644 drivers/mmc/host/sdhci-uhs2.c create mode 100644 drivers/mmc/host/sdhci-uhs2.h create mode 100644 include/linux/mmc/uhs2.h
Ulf Hansson <[email protected]> 於 2021年8月3日 週二 上午12:23寫道:
Quoted 199 lines · Jason Lai
Quoted 11 lines
Summary
=======
In these patches we focus on uhs2 side to address Ulf's suggestion which was mentioned in patch [mmc: core: Preparations to support SD UHS-II cards].I moved codes in
uhs2.cto proper functions insd_uhs2.c, which should meet Ulf's expection.Please review this series (particularly Patch 29/29).
I think you have misunderstood the intent with the series that I posted [1] a while ago. The idea was to add the foundation of what should be needed in the mmc core to support UHS-II cards. Note, it's only the foundation, not the complete code.
In other words, I think you should base the next version of $subject series *on top* of my series [1], rather than the opposite.
Moreover, next time, please try to better describe in each changelog and in a cover letter what you have changed and why, as it helps me to review.
Kind regards
Uffe[1]
https://patchwork.kernel.org/project/linux-mmc/list/?series=438509Quoted 167 lines
Thanks.
-Jason Lai------ original cover letter from v3 ------
This is an interim snapshot of our next version, v4, for enabling UHS-II on MMC/SD.It is focused on 'sdhci' side to address Adrian's comments regarding "modularising"
sdhci-uhs2.c.
The whole aim of this version is to get early feedback from Adrian (and others) on this issue. Without any consensus about the code structure, it would make little sense to go further ahead on sdhci side. (Actually, Adrian has made no comments other than "modularising" so far.)I heavily reworked/refactored
sdhci-uhs2.cand re-organised the patch set to meet what I believe Adrian expects; no UHS-II related code in Legacy (UHS-I) code orsdhci.c.Nevertheless, almost of all changes I made are trivial and straightforward in this direction, and I believe that there is no logic changed since v3 except
sdhci_uhs2_irq(), asops->irqhook, where we must deal with UHS-II command sequences in addition to UHS-II errors. So I added extra handlings.I admit that there is plenty of room for improvements (for example, handling
host->flags), but again the focal point here is howsdhci-uhs2.cshould be built as a module.Please review this series (particularly Patch#8-#26 and #27) from this viewpoint in the first place.
(Ben is working on 'host' side but there is no change on 'host' side in this submission except a minor tweak.)Thanks,
-Takahiro Akashi------ original cover letter from v3 ------
Summary
=======
These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.About UHS-II, roughly deal with the following three parts:
1) A UHS-II detection and initialization:
- Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence [2]).
- Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]).
- In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register Setup Sequence.2) Send Legacy SD command through SD-TRAN
- Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet Types and Format Overview[3]).
- Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).3) UHS-II Interrupt
- Except for UHS-II error interrupts, most interrupts share the original interrupt registers.Patch structure
===============
patch#1-#7: for core
patch#8-#17: for sdhci
patch#18-#21: for GL9755Tests
=====
Ran 'dd' command to evaluate the performance:
(SanDisk UHS-II card on GL9755 controller)
Read Write
UHS-II disabled (UHS-I): 88.3MB/s 60.7MB/s
UHS-II enabled : 206MB/s 80MB/sTODO
====
- replace some define with BIT macroReference
=========
[1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git
[2] SD Host Controller Simplified Specification 4.20
[3] UHS-II Simplified Addendum 1.02Changes in v3 (Jul. 10, 2020)
* rebased to v5.8-rc4
* add copyright notice
* reorganize the patch set and split some commits into smaller ones
* separate uhs-2 headers from others
* correct wrong spellings
* fix most of checkpatch warnings/errors
* remove all k[cz]alloc() from the code
* guard sdhci-uhs2 specific code with'if (IS_ENABLED(CONFIG_MMC_SDHCI_UHS2))'* make
sdhci-uhs2.cas a module
* trivial changes, including
- rename backsdhci-core.ctosdhci.c
- allow vendor code to disable uhs2 ifv4_mode== 0in __sdhci_add_host()- merge
uhs2_power_up()intommc_power_up()
- removeflag_uhs2frommmc_attach_sd()
- add function descriptions to EXPORT'ed functions
- other minor code optimizationChanges in v2 (Jan. 9, 2020)
* rebased to v5.5-rc5AKASHI Takahiro (23):
mmc: core: UHS-II support, modify power-up sequence
mmc: core: UHS-II support, skipset_chip_select()
mmc: core: UHS-II support, skip TMODE setup in some cases
mmc: core: UHS-II support, generate UHS-II SD command packet
mmc: core: UHS-II support, setAPP_CMDbit if necessary
mmc: sdhci: add a kernel configuration for enabling UHS-II support
mmc: sdhci: add UHS-II related definitions in headers
mmc: sdhci: add UHS-II module
mmc: sdhci-uhs2: dump UHS-II registers
mmc: sdhci-uhs2: add reset function
mmc: sdhci-uhs2: addset_power()to support vdd2
mmc: sdhci-uhs2: skipsignal_voltage_switch()
mmc: sdhci-uhs2: addset_timeout()
mmc: sdhci-uhs2: addset_ios()
mmc: sdhci-uhs2: adddetect_init()to detect the interface
mmc: sdhci-uhs2: add clock operations
mmc: sdhci-uhs2: addset_reg()to initialise the interface
mmc: sdhci-uhs2: addrequest()and others
mmc: sdhci-uhs2: addirq()and others
mmc: sdhci-uhs2: addadd_host()and others to set up the driver
mmc: core: add post-mmc_attach_sd hook
mmc: sdhci-pci: add UHS-II support framework
mmc: sdhci-pci-gli: enable UHS-II mode for GL9755Ben Chuang (4):
mmc: add UHS-II related definitions in public headers
mmc: core: UHS-II support, try to select UHS-II interface
mmc: sdhci-uhs2: add pre-detect_init hook
mmc: sdhci-uhs2: add post-mmc_attach_sd hookdrivers/mmc/core/Makefile | 2 +- drivers/mmc/core/block.c | 7 +- drivers/mmc/core/bus.c | 5 +- drivers/mmc/core/core.c | 118 +- drivers/mmc/core/regulator.c | 14 + drivers/mmc/core/sd.c | 32 + drivers/mmc/core/sd_ops.c | 12 + drivers/mmc/core/uhs2.c | 883 +++++++++++++++ drivers/mmc/core/uhs2.h | 21 + drivers/mmc/host/Kconfig | 10 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-pci-core.c | 16 +- drivers/mmc/host/sdhci-pci-gli.c | 318 +++++- drivers/mmc/host/sdhci-pci.h | 3 + drivers/mmc/host/sdhci-uhs2.c | 1697 +++++++++++++++++++++++++++++ drivers/mmc/host/sdhci-uhs2.h | 224 ++++ drivers/mmc/host/sdhci.c | 333 +++--- drivers/mmc/host/sdhci.h | 117 +- include/linux/mmc/card.h | 1 + include/linux/mmc/core.h | 6 + include/linux/mmc/host.h | 31 + include/linux/mmc/uhs2.h | 268 +++++ 22 files changed, 3961 insertions(+), 158 deletions(-) create mode 100644 drivers/mmc/core/uhs2.c create mode 100644 drivers/mmc/core/uhs2.h create mode 100644 drivers/mmc/host/sdhci-uhs2.c create mode 100644 drivers/mmc/host/sdhci-uhs2.h create mode 100644 include/linux/mmc/uhs2.h
Quoted 24 lines · Lai Jason
Quoted 14 lines · Ulf Hansson
Quoted 11 lines · Jason Lai
Summary
=======
In these patches we focus on uhs2 side to address Ulf's suggestion which was mentioned in patch [mmc: core: Preparations to support SD UHS-II cards].I moved codes in
uhs2.cto proper functions insd_uhs2.c, which should meet Ulf's expection.Please review this series (particularly Patch 29/29).
Quoted 8 lines
I think you have misunderstood the intent with the series that I posted [1] a while ago. The idea was to add the foundation of what should be needed in the mmc core to support UHS-II cards. Note, it's only the foundation, not the complete code.
In other words, I think you should base the next version of $subject series *on top* of my series [1], rather than the opposite.
Quoted 6 lines
Actually, I understand your intention is to implement functions which can be applied to control all UHS-II cards.
However, why do I choose to base it on “[RFC,v3.1,00/27] Add support UHS-II for GL9755”?
Because it contains a complete UHS-IIinterface(both host & card side)and UHS-II card can work normally.
It doesn't matter if things "work".
The code/patches need to be better organized than currently, especially the changes for the mmc core, which is why I stepped in and tried to help out earlier. Otherwise it is impossible for me to review the changes, but also to maintain the code in the long run.
The sdhci part is likely a bit more mature as it has been reviewed and iterated with Adrian/Ben/Akashi-san. However, new/more changes needed when my suggested changes for the mmc core come into play.
[...]
Kind regards
Uffe