Skip to contentSkip to conversation

media: camss: vfe: Don't read hardware version needlessly

PATCH In review Robert Foss 2 participants 6 messages Jul 26, 2021 – Aug 11, 2021

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/4 media: camss: vfe: Don't read hardware version needlessly

vfe_set_power() is invoced a few times, which causes a lot of VFE HW version prints.

Secondly there is no real reason for calling hw_version_read() from this location specifically, since it does nothing more than print the VFE HW version.

A better location for the hw_version_read() call would be somewhere which is only executed once per VFE unit.

---
 drivers/media/platform/qcom/camss/camss-vfe.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/media/platform/qcom/camss/camss-vfe.c +1 -2
index e0f3a36f3f3f..f6e889c1598e 100644
@@ -713,8 +713,6 @@ static int vfe_set_power(struct v4l2_subdev *sd, int on)
 		ret = vfe_get(vfe);
 		if (ret < 0)
 			return ret;
-
-		vfe->ops->hw_version_read(vfe, vfe->camss->dev);
 	} else {
 		vfe_put(vfe);
 	}
@@ -1301,6 +1299,7 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
 		return -EINVAL;
 	}
 	vfe->ops->subdev_init(dev, vfe);
+	vfe->ops->hw_version_read(vfe, dev);
 
 	/* Memory */
 
Signature · 1 line
2.29.2
#1 lore raw

PATCH 2/4 media: camss: vfe: Decrease priority of of VFE HW version to 'dbg'

The HW Version can in no case represent an error, so change the print priority to 'dbg'.

---
 drivers/media/platform/qcom/camss/camss-vfe-170.c | 2 +-
 drivers/media/platform/qcom/camss/camss-vfe-4-7.c | 2 +-
 drivers/media/platform/qcom/camss/camss-vfe-4-8.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)
drivers/media/platform/qcom/camss/camss-vfe-170.c +1 -1
index 8594d275b41d..1ad502a1c276 100644
@@ -185,7 +185,7 @@ static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)
 	u32 rev = (hw_version >> 16) & 0xFFF;
 	u32 step = hw_version & 0xFFFF;
 
-	dev_err(dev, "VFE HW Version = %u.%u.%u\n", gen, rev, step);
+	dev_dbg(dev, "VFE HW Version = %u.%u.%u\n", gen, rev, step);
 }
 
 static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)
drivers/media/platform/qcom/camss/camss-vfe-4-7.c +1 -1
index a59635217758..13f0fa6a7d60 100644
@@ -258,7 +258,7 @@ static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)
 {
 	u32 hw_version = readl_relaxed(vfe->base + VFE_0_HW_VERSION);
 
-	dev_err(dev, "VFE HW Version = 0x%08x\n", hw_version);
+	dev_dbg(dev, "VFE HW Version = 0x%08x\n", hw_version);
 }
 
 static u16 vfe_get_ub_size(u8 vfe_id)
drivers/media/platform/qcom/camss/camss-vfe-4-8.c +1 -1
index 998429dbb65c..03f92a6737b0 100644
@@ -251,7 +251,7 @@ static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)
 {
 	u32 hw_version = readl_relaxed(vfe->base + VFE_0_HW_VERSION);
 
-	dev_err(dev, "VFE HW Version = 0x%08x\n", hw_version);
+	dev_dbg(dev, "VFE HW Version = 0x%08x\n", hw_version);
 }
 
 static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)
Signature · 1 line
2.29.2
#2 lore raw

PATCH 3/4 media: camss: vfe: Remove vfe_hw_version_read() argument

In reply to Robert Foss

The device argument is not needed, since it is accessible through the vfe_device argument already.

---
 drivers/media/platform/qcom/camss/camss-vfe-170.c | 5 +++--
 drivers/media/platform/qcom/camss/camss-vfe-4-1.c | 4 ++--
 drivers/media/platform/qcom/camss/camss-vfe-4-7.c | 4 ++--
 drivers/media/platform/qcom/camss/camss-vfe-4-8.c | 4 ++--
 drivers/media/platform/qcom/camss/camss-vfe.c     | 2 +-
 drivers/media/platform/qcom/camss/camss-vfe.h     | 2 +-
 6 files changed, 11 insertions(+), 10 deletions(-)
drivers/media/platform/qcom/camss/camss-vfe-170.c +3 -2
index 1ad502a1c276..8ef4e80a62a2 100644
@@ -177,7 +177,7 @@
 #define VFE_BUS_WM_FRAME_INC(n)			(0x2258 + (n) * 0x100)
 #define VFE_BUS_WM_BURST_LIMIT(n)		(0x225c + (n) * 0x100)
 
-static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)
+static void vfe_hw_version_read(struct vfe_device *vfe)
 {
 	u32 hw_version = readl_relaxed(vfe->base + VFE_HW_VERSION);
 
@@ -185,7 +185,8 @@ static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)
 	u32 rev = (hw_version >> 16) & 0xFFF;
 	u32 step = hw_version & 0xFFFF;
 
-	dev_dbg(dev, "VFE HW Version = %u.%u.%u\n", gen, rev, step);
+	dev_dbg(vfe->camss->dev, "VFE HW Version = %u.%u.%u\n",
+		gen, rev, step);
 }
 
 static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)
drivers/media/platform/qcom/camss/camss-vfe-4-1.c +2 -2
index 53c56a8d4545..614c266e8cd1 100644
@@ -210,11 +210,11 @@
 #define MSM_VFE_VFE0_UB_SIZE 1023
 #define MSM_VFE_VFE0_UB_SIZE_RDI (MSM_VFE_VFE0_UB_SIZE / 3)
 
-static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)
+static void vfe_hw_version_read(struct vfe_device *vfe)
 {
 	u32 hw_version = readl_relaxed(vfe->base + VFE_0_HW_VERSION);
 
-	dev_dbg(dev, "VFE HW Version = 0x%08x\n", hw_version);
+	dev_dbg(vfe->camss->dev, "VFE HW Version = 0x%08x\n", hw_version);
 }
 
 static u16 vfe_get_ub_size(u8 vfe_id)
drivers/media/platform/qcom/camss/camss-vfe-4-7.c +2 -2
index 13f0fa6a7d60..aa175e0f6331 100644
@@ -254,11 +254,11 @@
 #define MSM_VFE_VFE1_UB_SIZE 1535
 #define MSM_VFE_VFE1_UB_SIZE_RDI (MSM_VFE_VFE1_UB_SIZE / 3)
 
-static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)
+static void vfe_hw_version_read(struct vfe_device *vfe)
 {
 	u32 hw_version = readl_relaxed(vfe->base + VFE_0_HW_VERSION);
 
-	dev_dbg(dev, "VFE HW Version = 0x%08x\n", hw_version);
+	dev_dbg(vfe->camss->dev, "VFE HW Version = 0x%08x\n", hw_version);
 }
 
 static u16 vfe_get_ub_size(u8 vfe_id)
drivers/media/platform/qcom/camss/camss-vfe-4-8.c +2 -2
index 03f92a6737b0..b897f5163c5d 100644
@@ -247,11 +247,11 @@
 #define MSM_VFE_VFE1_UB_SIZE 1535
 #define MSM_VFE_VFE1_UB_SIZE_RDI (MSM_VFE_VFE1_UB_SIZE / 3)
 
-static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)
+static void vfe_hw_version_read(struct vfe_device *vfe)
 {
 	u32 hw_version = readl_relaxed(vfe->base + VFE_0_HW_VERSION);
 
-	dev_dbg(dev, "VFE HW Version = 0x%08x\n", hw_version);
+	dev_dbg(vfe->camss->dev, "VFE HW Version = 0x%08x\n", hw_version);
 }
 
 static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)
drivers/media/platform/qcom/camss/camss-vfe.c +1 -1
index f6e889c1598e..9b4f8136759c 100644
@@ -1299,7 +1299,7 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
 		return -EINVAL;
 	}
 	vfe->ops->subdev_init(dev, vfe);
-	vfe->ops->hw_version_read(vfe, dev);
+	vfe->ops->hw_version_read(vfe);
 
 	/* Memory */
 
drivers/media/platform/qcom/camss/camss-vfe.h +1 -1
index 844b9275031d..cca251816d28 100644
@@ -103,7 +103,7 @@ struct vfe_device;
 struct vfe_hw_ops {
 	void (*enable_irq_common)(struct vfe_device *vfe);
 	void (*global_reset)(struct vfe_device *vfe);
-	void (*hw_version_read)(struct vfe_device *vfe, struct device *dev);
+	void (*hw_version_read)(struct vfe_device *vfe);
 	irqreturn_t (*isr)(int irq, void *dev);
 	void (*isr_read)(struct vfe_device *vfe, u32 *value0, u32 *value1);
 	void (*pm_domain_off)(struct vfe_device *vfe);
Signature · 1 line
2.29.2
#3 lore raw

PATCH 4/4 media: camss: vfe: Rework vfe_hw_version_read() function definition

In reply to Robert Foss

Expose the VFE version by returning the value read from the HW_VERSION register.

Secondly, change the name of this function to conform with the CSID equivalent.

---
 drivers/media/platform/qcom/camss/camss-vfe-170.c | 6 ++++--
 drivers/media/platform/qcom/camss/camss-vfe-4-1.c | 6 ++++--
 drivers/media/platform/qcom/camss/camss-vfe-4-7.c | 6 ++++--
 drivers/media/platform/qcom/camss/camss-vfe-4-8.c | 6 ++++--
 drivers/media/platform/qcom/camss/camss-vfe.c     | 2 +-
 drivers/media/platform/qcom/camss/camss-vfe.h     | 2 +-
 6 files changed, 18 insertions(+), 10 deletions(-)
drivers/media/platform/qcom/camss/camss-vfe-170.c +4 -2
index 8ef4e80a62a2..5c083d70d495 100644
@@ -177,7 +177,7 @@
 #define VFE_BUS_WM_FRAME_INC(n)			(0x2258 + (n) * 0x100)
 #define VFE_BUS_WM_BURST_LIMIT(n)		(0x225c + (n) * 0x100)
 
-static void vfe_hw_version_read(struct vfe_device *vfe)
+static u32 vfe_hw_version(struct vfe_device *vfe)
 {
 	u32 hw_version = readl_relaxed(vfe->base + VFE_HW_VERSION);
 
@@ -187,6 +187,8 @@ static void vfe_hw_version_read(struct vfe_device *vfe)
 
 	dev_dbg(vfe->camss->dev, "VFE HW Version = %u.%u.%u\n",
 		gen, rev, step);
+
+	return hw_version;
 }
 
 static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)
@@ -772,7 +774,7 @@ static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
 
 const struct vfe_hw_ops vfe_ops_170 = {
 	.global_reset = vfe_global_reset,
-	.hw_version_read = vfe_hw_version_read,
+	.hw_version = vfe_hw_version,
 	.isr_read = vfe_isr_read,
 	.isr = vfe_isr,
 	.pm_domain_off = vfe_pm_domain_off,
drivers/media/platform/qcom/camss/camss-vfe-4-1.c +4 -2
index 614c266e8cd1..7b7c9a0aaab2 100644
@@ -210,11 +210,13 @@
 #define MSM_VFE_VFE0_UB_SIZE 1023
 #define MSM_VFE_VFE0_UB_SIZE_RDI (MSM_VFE_VFE0_UB_SIZE / 3)
 
-static void vfe_hw_version_read(struct vfe_device *vfe)
+static u32 vfe_hw_version(struct vfe_device *vfe)
 {
 	u32 hw_version = readl_relaxed(vfe->base + VFE_0_HW_VERSION);
 
 	dev_dbg(vfe->camss->dev, "VFE HW Version = 0x%08x\n", hw_version);
+
+	return hw_version;
 }
 
 static u16 vfe_get_ub_size(u8 vfe_id)
@@ -1004,7 +1006,7 @@ static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
 
 const struct vfe_hw_ops vfe_ops_4_1 = {
 	.global_reset = vfe_global_reset,
-	.hw_version_read = vfe_hw_version_read,
+	.hw_version = vfe_hw_version,
 	.isr_read = vfe_isr_read,
 	.isr = vfe_isr,
 	.pm_domain_off = vfe_pm_domain_off,
drivers/media/platform/qcom/camss/camss-vfe-4-7.c +4 -2
index aa175e0f6331..2836b12ec989 100644
@@ -254,11 +254,13 @@
 #define MSM_VFE_VFE1_UB_SIZE 1535
 #define MSM_VFE_VFE1_UB_SIZE_RDI (MSM_VFE_VFE1_UB_SIZE / 3)
 
-static void vfe_hw_version_read(struct vfe_device *vfe)
+static u32 vfe_hw_version(struct vfe_device *vfe)
 {
 	u32 hw_version = readl_relaxed(vfe->base + VFE_0_HW_VERSION);
 
 	dev_dbg(vfe->camss->dev, "VFE HW Version = 0x%08x\n", hw_version);
+
+	return hw_version;
 }
 
 static u16 vfe_get_ub_size(u8 vfe_id)
@@ -1196,7 +1198,7 @@ static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
 
 const struct vfe_hw_ops vfe_ops_4_7 = {
 	.global_reset = vfe_global_reset,
-	.hw_version_read = vfe_hw_version_read,
+	.hw_version = vfe_hw_version,
 	.isr_read = vfe_isr_read,
 	.isr = vfe_isr,
 	.pm_domain_off = vfe_pm_domain_off,
drivers/media/platform/qcom/camss/camss-vfe-4-8.c +4 -2
index b897f5163c5d..19519234f727 100644
@@ -247,11 +247,13 @@
 #define MSM_VFE_VFE1_UB_SIZE 1535
 #define MSM_VFE_VFE1_UB_SIZE_RDI (MSM_VFE_VFE1_UB_SIZE / 3)
 
-static void vfe_hw_version_read(struct vfe_device *vfe)
+static u32 vfe_hw_version(struct vfe_device *vfe)
 {
 	u32 hw_version = readl_relaxed(vfe->base + VFE_0_HW_VERSION);
 
 	dev_dbg(vfe->camss->dev, "VFE HW Version = 0x%08x\n", hw_version);
+
+	return hw_version;
 }
 
 static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)
@@ -1180,7 +1182,7 @@ static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
 
 const struct vfe_hw_ops vfe_ops_4_8 = {
 	.global_reset = vfe_global_reset,
-	.hw_version_read = vfe_hw_version_read,
+	.hw_version = vfe_hw_version,
 	.isr_read = vfe_isr_read,
 	.isr = vfe_isr,
 	.pm_domain_off = vfe_pm_domain_off,
drivers/media/platform/qcom/camss/camss-vfe.c +1 -1
index 9b4f8136759c..6b2f33fc9be2 100644
@@ -1299,7 +1299,7 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
 		return -EINVAL;
 	}
 	vfe->ops->subdev_init(dev, vfe);
-	vfe->ops->hw_version_read(vfe);
+	vfe->ops->hw_version(vfe);
 
 	/* Memory */
 
drivers/media/platform/qcom/camss/camss-vfe.h +1 -1
index cca251816d28..f166d176cb77 100644
@@ -103,7 +103,7 @@ struct vfe_device;
 struct vfe_hw_ops {
 	void (*enable_irq_common)(struct vfe_device *vfe);
 	void (*global_reset)(struct vfe_device *vfe);
-	void (*hw_version_read)(struct vfe_device *vfe);
+	u32 (*hw_version)(struct vfe_device *vfe);
 	irqreturn_t (*isr)(int irq, void *dev);
 	void (*isr_read)(struct vfe_device *vfe, u32 *value0, u32 *value1);
 	void (*pm_domain_off)(struct vfe_device *vfe);
Signature · 1 line
2.29.2
#4 lore raw
In reply to Robert Foss

Hi,

Quoted 11 lines · Robert Foss

vfe_set_power() is invoced a few times, which causes a lot of VFE HW version prints.

Secondly there is no real reason for calling hw_version_read() from this location specifically, since it does nothing more than print the VFE HW version.

A better location for the hw_version_read() call would be somewhere which is only executed once per VFE unit.

This patch landed recently in linux-next as commit b10b5334528a ("media:
camss: vfe: Don't read hardware version needlessly"). Sadly it causes a following regression on DragonBoard410c (arch/arm64/boot/dts/qcom/apq8016-sbc.dts):

Unable to handle kernel NULL pointer dereference at virtual address 

0000000000000000
Mem abort info:
  ESR = 0x96000006
  EC = 0x25: DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
  FSC = 0x06: level 2 translation fault
input: pm8941_resin as /devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pmic@0:pon@800/200f000.spmi:pmic@0:pon@800:resin/input/input2 Data abort info:
  ISV = 0, ISS = 0x00000006
  CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000087ca0000
[0000000000000000] pgd=0800000084c4c003, p4d=0800000084c4c003,
pud=08000000859c2003, pmd=0000000000000000

Internal error: Oops: 96000006 [#1] PREEMPT SMP
Modules linked in: msm(+) qcom_pon rtc_pm8xxx qcom_spmi_vadc 

qcom_vadc_common qcom_camss(+) snd_soc_msm8916_analog qcom_spmi_temp_alarm venus_core(+) videobuf2_dma_sg v4l2_fwnode snd_soc_lpass_apq8016 v4l2_async videobuf2_memops snd_soc_lpass_cpu v4l2_mem2mem snd_soc_apq8016_sbc snd_soc_lpass_platform snd_soc_msm8916_digital videobuf2_v4l2 snd_soc_qcom_common videobuf2_common qnoc_msm8916 qcom_rng videodev i2c_qcom_cci mdt_loader mc icc_smd_rpm crct10dif_ce socinfo rmtfs_mem display_connector adreno 1c00000.gpu: Adding to iommu group 2

CPU: 1 PID: 286 Comm: systemd-udevd Not tainted 5.14.0-rc4+ #3778
Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
pc : vfe_hw_version_read+0x4/0x10 [qcom_camss]
platform 1a98000.dsi: Fixing up cyclic dependency with 3-0039
lr : msm_vfe_subdev_init+0x84/0x558 [qcom_camss]

platform 1a98000.dsi: Fixing up cyclic dependency with 1a01000.mdp sp : ffff8000148337f0
x29: ffff8000148337f0 x28: ffff000006c1d800 x27: 0000000000000001
x26: 0000000000000002 x25: ffff8000091976d0 x24: ffff000006a98080
x23: 0000000000000000 x22: ffff000006c1d800 x21: ffff000000298010
x20: ffff800009197028 x19: ffff000000298000 x18: 0000000000000000
x17: 2e726f74616c7567 x16: 0000000000000028 x15: 0000b5f01da86af8
x14: 0000000000000001 x13: 000000000000001f x12: 0000000000000001
x11: 0000000000000010 x10: 0101010101010101 x9 : ffff8000091922f0 x8 : ffff8000091949f0 x7 : ffff800009194a08 x6 : ffff8000091925c8 x5 : ffff800009191f00 x4 : ffff000006a9ca00 x3 : ffff000006a9c080 x2 : ffff80000918d3a0 x1 : ffff000000298010 x0 : 0000000000000000 msm_mdp 1a01000.mdp: Adding to iommu group 3

Call trace:
  vfe_hw_version_read+0x4/0x10 [qcom_camss]
  camss_probe+0x370/0xdd0 [qcom_camss]
  platform_probe+0x90/0xd8
  really_probe+0x138/0x2d0
  __driver_probe_device+0x78/0xd8
  driver_probe_device+0x40/0x110
  __driver_attach+0xcc/0x118
  bus_for_each_dev+0x68/0xc8
  driver_attach+0x20/0x28
  bus_add_driver+0x168/0x1f8
  driver_register+0x60/0x110
  __platform_driver_register+0x24/0x30
  qcom_camss_driver_init+0x1c/0x1000 [qcom_camss]
  do_one_initcall+0x84/0x450
  do_init_module+0x58/0x200
  load_module+0x1f54/0x26a0
  __do_sys_finit_module+0xe4/0x100
  __arm64_sys_finit_module+0x18/0x20
  invoke_syscall+0x40/0xf8
  el0_svc_common+0x60/0x100
  do_el0_svc_compat+0x1c/0x48
  el0_svc_compat+0x20/0x30
  el0t_32_sync_handler+0xec/0x140
  el0t_32_sync+0x168/0x16c
Code: 88dffc63 88dffc63 00000000 f9400800 (b9400000)
---[ end trace e1e3b303eae40654 ]---

Let me know if I can help somehow to fix this issue.

Quoted 18 lines
---
  drivers/media/platform/qcom/camss/camss-vfe.c | 3 +--
  1 file changed, 1 insertion(+), 2 deletions(-)
drivers/media/platform/qcom/camss/camss-vfe.c +0 -2
index e0f3a36f3f3f..f6e889c1598e 100644
@@ -713,8 +713,6 @@ static int vfe_set_power(struct v4l2_subdev *sd, int on)
  		ret = vfe_get(vfe);
  		if (ret < 0)
  			return ret;
-
-		vfe->ops->hw_version_read(vfe, vfe->camss->dev);
  	} else {
  		vfe_put(vfe);
  	}

drivers/media/platform/qcom/camss/camss-vfe.c int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe, · line 1305

Quoted 7 lines
drivers/media/platform/qcom/camss/camss-vfe.c +1 -0
@@ -1301,6 +1299,7 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
  		return -EINVAL;
  	}
  	vfe->ops->subdev_init(dev, vfe);
+	vfe->ops->hw_version_read(vfe, dev);
 
  	/* Memory */
 

Best regards

Signature · 2 lines
Marek Szyprowski, PhD
Samsung R&D Institute Poland
#5 lore raw

Hey Marek,

Quoted 119 lines · Marek Szyprowski

Hi,

Quoted 11 lines · Robert Foss

vfe_set_power() is invoced a few times, which causes a lot of VFE HW version prints.

Secondly there is no real reason for calling hw_version_read() from this location specifically, since it does nothing more than print the VFE HW version.

A better location for the hw_version_read() call would be somewhere which is only executed once per VFE unit.

This patch landed recently in linux-next as commit b10b5334528a ("media:
camss: vfe: Don't read hardware version needlessly"). Sadly it causes a following regression on DragonBoard410c (arch/arm64/boot/dts/qcom/apq8016-sbc.dts):

Unable to handle kernel NULL pointer dereference at virtual address
0000000000000000
Mem abort info:
   ESR = 0x96000006
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
   FSC = 0x06: level 2 translation fault
input: pm8941_resin as
/devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pmic@0:pon@800/200f000.spmi:pmic@0:pon@800:resin/input/input2
Data abort info:
   ISV = 0, ISS = 0x00000006
   CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000087ca0000
[0000000000000000] pgd=0800000084c4c003, p4d=0800000084c4c003,
pud=08000000859c2003, pmd=0000000000000000
Internal error: Oops: 96000006 [#1] PREEMPT SMP
Modules linked in: msm(+) qcom_pon rtc_pm8xxx qcom_spmi_vadc

qcom_vadc_common qcom_camss(+) snd_soc_msm8916_analog qcom_spmi_temp_alarm venus_core(+) videobuf2_dma_sg v4l2_fwnode snd_soc_lpass_apq8016 v4l2_async videobuf2_memops snd_soc_lpass_cpu v4l2_mem2mem snd_soc_apq8016_sbc snd_soc_lpass_platform snd_soc_msm8916_digital videobuf2_v4l2 snd_soc_qcom_common videobuf2_common qnoc_msm8916 qcom_rng videodev i2c_qcom_cci mdt_loader mc icc_smd_rpm crct10dif_ce socinfo rmtfs_mem display_connector adreno 1c00000.gpu: Adding to iommu group 2

CPU: 1 PID: 286 Comm: systemd-udevd Not tainted 5.14.0-rc4+ #3778
Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
pc : vfe_hw_version_read+0x4/0x10 [qcom_camss]
platform 1a98000.dsi: Fixing up cyclic dependency with 3-0039
lr : msm_vfe_subdev_init+0x84/0x558 [qcom_camss]

platform 1a98000.dsi: Fixing up cyclic dependency with 1a01000.mdp sp : ffff8000148337f0
x29: ffff8000148337f0 x28: ffff000006c1d800 x27: 0000000000000001
x26: 0000000000000002 x25: ffff8000091976d0 x24: ffff000006a98080
x23: 0000000000000000 x22: ffff000006c1d800 x21: ffff000000298010
x20: ffff800009197028 x19: ffff000000298000 x18: 0000000000000000
x17: 2e726f74616c7567 x16: 0000000000000028 x15: 0000b5f01da86af8
x14: 0000000000000001 x13: 000000000000001f x12: 0000000000000001
x11: 0000000000000010 x10: 0101010101010101 x9 : ffff8000091922f0 x8 : ffff8000091949f0 x7 : ffff800009194a08 x6 : ffff8000091925c8 x5 : ffff800009191f00 x4 : ffff000006a9ca00 x3 : ffff000006a9c080 x2 : ffff80000918d3a0 x1 : ffff000000298010 x0 : 0000000000000000 msm_mdp 1a01000.mdp: Adding to iommu group 3

Call trace:
  vfe_hw_version_read+0x4/0x10 [qcom_camss]
  camss_probe+0x370/0xdd0 [qcom_camss]
  platform_probe+0x90/0xd8
  really_probe+0x138/0x2d0
  __driver_probe_device+0x78/0xd8
  driver_probe_device+0x40/0x110
  __driver_attach+0xcc/0x118
  bus_for_each_dev+0x68/0xc8
  driver_attach+0x20/0x28
  bus_add_driver+0x168/0x1f8
  driver_register+0x60/0x110
  __platform_driver_register+0x24/0x30
  qcom_camss_driver_init+0x1c/0x1000 [qcom_camss]
  do_one_initcall+0x84/0x450
  do_init_module+0x58/0x200
  load_module+0x1f54/0x26a0
  __do_sys_finit_module+0xe4/0x100
  __arm64_sys_finit_module+0x18/0x20
  invoke_syscall+0x40/0xf8
  el0_svc_common+0x60/0x100
  do_el0_svc_compat+0x1c/0x48
  el0_svc_compat+0x20/0x30
  el0t_32_sync_handler+0xec/0x140
  el0t_32_sync+0x168/0x16c
Code: 88dffc63 88dffc63 00000000 f9400800 (b9400000)
---[ end trace e1e3b303eae40654 ]---

Let me know if I can help somehow to fix this issue.

Quoted 23 lines
---
  drivers/media/platform/qcom/camss/camss-vfe.c | 3 +--
  1 file changed, 1 insertion(+), 2 deletions(-)
drivers/media/platform/qcom/camss/camss-vfe.c +1 -2
index e0f3a36f3f3f..f6e889c1598e 100644
@@ -713,8 +713,6 @@ static int vfe_set_power(struct v4l2_subdev *sd, int on)
              ret = vfe_get(vfe);
              if (ret < 0)
                      return ret;
-
-             vfe->ops->hw_version_read(vfe, vfe->camss->dev);
      } else {
              vfe_put(vfe);
      }
@@ -1301,6 +1299,7 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
              return -EINVAL;
      }
      vfe->ops->subdev_init(dev, vfe);
+     vfe->ops->hw_version_read(vfe, dev);
 
Quoted 3 lines

drivers/media/platform/qcom/camss/camss-vfe.c int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe, · line 1305

Quoted 2 lines
drivers/media/platform/qcom/camss/camss-vfe.c +0 -0
      /* Memory */
 

Thanks for reporting this.

I submitted a patch[1] for this yesterday, if you have time to test it and supply a Tested-by/Reviewed-by, that would be really helpful.

[1] https://lore.kernel.org/linux-arm-msm/[email protected]/