gpiomon: Add option to set debounce period
PATCH 1/1 gpiomon: Add option to set debounce period
With the v2 API it's now possible to enable debouncing of an input. Add an option to enable debouncing with a specific period.
Signed-off-by Ben Hutchings <[email protected]>
--- tools/gpiomon.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
tools/gpiomon.c +11 -1
@@ -22,6 +22,7 @@ static const struct option longopts[] = { { "version", no_argument, NULL, 'v' }, { "active-low", no_argument, NULL, 'l' }, { "bias", required_argument, NULL, 'B' }, + { "debounce", required_argument, NULL, 'd' }, { "num-events", required_argument, NULL, 'n' }, { "silent", no_argument, NULL, 's' }, { "rising-edge", no_argument, NULL, 'r' },
@@ -31,7 +32,7 @@ static const struct option longopts[] = { { GETOPT_NULL_LONGOPT }, }; -static const char *const shortopts ="+hvlB:n:srfbF:" ; +static const char *const shortopts ="+hvlB:d:n:srfbF:" ;static void print_help (void ) {
@@ -46,6 +47,7 @@ static void print_help(void)printf (" -l, --active-low:\tset the line active state to low\n" );printf (" -B, --bias=[as-is|disable|pull-down|pull-up] (defaults to 'as-is'):\n" );printf (" set the line bias\n" ); +printf (" -d, --debounce=PERIOD: enable debouncing with period in microseconds\n" );printf (" -n, --num-events=NUM:\texit after processing NUM events\n" );printf (" -s, --silent:\t\tdon't print event info\n" );printf (" -r, --rising-edge:\tonly process rising edge events\n" );
@@ -157,6 +159,7 @@ int main(int argc, char **argv)unsigned int offsets[64 ], num_lines =0 , offset, events_wanted =0 , events_done =0 ;bool watch_rising = false, watch_falling = false, active_low = false; +unsigned long debounce_period =0 ;struct gpiod_edge_event_buffer *event_buffer;int optc, opti, ret, i, edge, bias =0 ;uint64_t timeout =10 *1000000000LLU ;
@@ -195,6 +198,11 @@ int main(int argc, char **argv)case 'B' : bias =parse_bias (optarg);break ; +case 'd' : + debounce_period =strtoul (optarg, &end,10 ); +if (*end !='\0' ) +die ("invalid number: %s" , optarg); +break ;case 'n' : events_wanted =strtoul (optarg, &end,10 );if (*end !='\0' )
@@ -263,6 +271,8 @@ int main(int argc, char **argv)if (active_low)gpiod_line_config_set_active_low (line_cfg);gpiod_line_config_set_edge_detection (line_cfg, edge); +if (debounce_period) +gpiod_line_config_set_debounce_period (line_cfg, debounce_period); req_cfg =gpiod_request_config_new ();if (!req_cfg)
Signature · 1 line
2.20.1
Quoted 68 lines · Ben Hutchings
With the v2 API it's now possible to enable debouncing of an input. Add an option to enable debouncing with a specific period.
Signed-off-by Ben Hutchings <[email protected]>--- tools/gpiomon.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)tools/gpiomon.c +11
-2@@ -22,6 +22,7 @@ static const struct option longopts[] = { { "version", no_argument, NULL, 'v' }, { "active-low", no_argument, NULL, 'l' }, { "bias", required_argument, NULL, 'B' }, + { "debounce", required_argument, NULL, 'd' }, { "num-events", required_argument, NULL, 'n' }, { "silent", no_argument, NULL, 's' }, { "rising-edge", no_argument, NULL, 'r' },@@ -31,7 +32,7 @@ static const struct option longopts[] = { { GETOPT_NULL_LONGOPT }, }; -static const char *const shortopts ="+hvlB:n:srfbF:" ; +static const char *const shortopts ="+hvlB:d:n:srfbF:" ;static void print_help (void ) {@@ -46,6 +47,7 @@ static void print_help(void)printf (" -l, --active-low:\tset the line active state to low\n" );printf (" -B, --bias=[as-is|disable|pull-down|pull-up] (defaults to 'as-is'):\n" );printf (" set the line bias\n" ); +printf (" -d, --debounce=PERIOD: enable debouncing with period in microseconds\n" );printf (" -n, --num-events=NUM:\texit after processing NUM events\n" );printf (" -s, --silent:\t\tdon't print event info\n" );printf (" -r, --rising-edge:\tonly process rising edge events\n" );@@ -157,6 +159,7 @@ int main(int argc, char **argv)unsigned int offsets[64 ], num_lines =0 , offset, events_wanted =0 , events_done =0 ;bool watch_rising = false, watch_falling = false, active_low = false; +unsigned long debounce_period =0 ;struct gpiod_edge_event_buffer *event_buffer;int optc, opti, ret, i, edge, bias =0 ;uint64_t timeout =10 *1000000000LLU ;@@ -195,6 +198,11 @@ int main(int argc, char **argv)case 'B' : bias =parse_bias (optarg);break ; +case 'd' : + debounce_period =strtoul (optarg, &end,10 ); +if (*end !='\0' ) +die ("invalid number: %s" , optarg); +break ;case 'n' : events_wanted =strtoul (optarg, &end,10 );if (*end !='\0' )@@ -263,6 +271,8 @@ int main(int argc, char **argv)if (active_low)gpiod_line_config_set_active_low (line_cfg);gpiod_line_config_set_edge_detection (line_cfg, edge); +if (debounce_period) +gpiod_line_config_set_debounce_period (line_cfg, debounce_period); req_cfg =gpiod_request_config_new ();if (!req_cfg) --
Quoted 1 line
2.20.1
Queued for post libgpiod v2.
Bart