Skip to contentSkip to conversation

irqchip/gic-v3: Fix selection of partition domain for EPPIs

PATCH Applied James Morse 3 participants 7 messages Jul 29, 2021 – Aug 12, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover irqchip/gic-v3: Fix selection of partition domain for EPPIs

Hello!

gic_irq_domain_translate()'s GIC_IRQ_TYPE_PARTITION code knows about EPPI, and gic_populate_ppi_partitions() sets them up, but gic_irq_domain_select() and partition_domain_translate() didn't get the memo, meaning partitioned EPPI don't work.

I'm not aware of a platform affected by this, so I don't think its stable material.

Based on rc1, available here:

git://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git irqchip/ppi_partition/eppi_fixes/v1

Thanks,

James Morse (2):
irqchip/gic-v3: Add __gic_get_ppi_index() to find the PPI number from
hwirq
irqchip/gic-v3: Fix selection of partition domain for EPPIs

 drivers/irqchip/irq-gic-v3.c | 61 +++++++++++++++++++++++++++++-------
 1 file changed, 50 insertions(+), 11 deletions(-)
Signature · 1 line
2.30.2
#1 lore raw

PATCH 1/2 irqchip/gic-v3: Add __gic_get_ppi_index() to find the PPI number from hwirq

gic_get_ppi_index() is a useful concept for ppi partitions, as the GIC has two PPI ranges but needs mapping to a single range when used as an index in the gic_data.ppi_descs[] array.

Add a double-underscore version which takes just the intid. This will be used in the partition domain select and translate helpers to enable partition support for the EPPI range.

---
 drivers/irqchip/irq-gic-v3.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/irqchip/irq-gic-v3.c +9 -4
index e0f4debe64e1..b24f0a9d2876 100644
@@ -446,18 +446,23 @@ static void gic_irq_set_prio(struct irq_data *d, u8 prio)
 	writeb_relaxed(prio, base + offset + index);
 }
 
-static u32 gic_get_ppi_index(struct irq_data *d)
+static u32 __gic_get_ppi_index(irq_hw_number_t hwirq)
 {
-	switch (get_intid_range(d)) {
+	switch (__get_intid_range(hwirq)) {
 	case PPI_RANGE:
-		return d->hwirq - 16;
+		return hwirq - 16;
 	case EPPI_RANGE:
-		return d->hwirq - EPPI_BASE_INTID + 16;
+		return hwirq - EPPI_BASE_INTID + 16;
 	default:
 		unreachable();
 	}
 }
 
+static u32 gic_get_ppi_index(struct irq_data *d)
+{
+	return __gic_get_ppi_index(d->hwirq);
+}
+
 static int gic_irq_nmi_setup(struct irq_data *d)
 {
 	struct irq_desc *desc = irq_to_desc(d->irq);
Signature · 1 line
2.30.2
Reviewed-by on v1 1/2
#2 lore raw

Re: [PATCH 1/2] irqchip/gic-v3: Add __gic_get_ppi_index() to find the PPI number from hwirq

Quoted 9 lines · James Morse

gic_get_ppi_index() is a useful concept for ppi partitions, as the GIC has two PPI ranges but needs mapping to a single range when used as an index in the gic_data.ppi_descs[] array.

Add a double-underscore version which takes just the intid. This will be used in the partition domain select and translate helpers to enable partition support for the EPPI range.

merge bot Applied
#3 lore raw

[irqchip: irq/irqchip-next] irqchip/gic-v3: Add __gic_get_ppi_index() to find the PPI number from hwirq

In reply to James Morse
The following commit has been merged into the irq/irqchip-next branch of irqchip:

The following commit has been merged into the irq/irqchip-next branch of irqchip:

Commit-ID:     bfa80ee9ce6e2f18da76459c3dd7b0ad57fb2c20
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms/bfa80ee9ce6e2f18da76459c3dd7b0ad57fb2c20
Author:        James Morse <[email protected]>
AuthorDate:    Thu, 29 Jul 2021 17:27:47 
Committer:     Marc Zyngier <[email protected]>
CommitterDate: Thu, 12 Aug 2021 08:11:03 +01:00

irqchip/gic-v3: Add __gic_get_ppi_index() to find the PPI number from hwirq

gic_get_ppi_index() is a useful concept for ppi partitions, as the GIC has two PPI ranges but needs mapping to a single range when used as an index in the gic_data.ppi_descs[] array.

Add a double-underscore version which takes just the intid. This will be used in the partition domain select and translate helpers to enable partition support for the EPPI range.

---
 drivers/irqchip/irq-gic-v3.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/irqchip/irq-gic-v3.c +9 -4
index e0f4deb..b24f0a9 100644
@@ -446,18 +446,23 @@ static void gic_irq_set_prio(struct irq_data *d, u8 prio)
 	writeb_relaxed(prio, base + offset + index);
 }
 
-static u32 gic_get_ppi_index(struct irq_data *d)
+static u32 __gic_get_ppi_index(irq_hw_number_t hwirq)
 {
-	switch (get_intid_range(d)) {
+	switch (__get_intid_range(hwirq)) {
 	case PPI_RANGE:
-		return d->hwirq - 16;
+		return hwirq - 16;
 	case EPPI_RANGE:
-		return d->hwirq - EPPI_BASE_INTID + 16;
+		return hwirq - EPPI_BASE_INTID + 16;
 	default:
 		unreachable();
 	}
 }
 
+static u32 gic_get_ppi_index(struct irq_data *d)
+{
+	return __gic_get_ppi_index(d->hwirq);
+}
+
 static int gic_irq_nmi_setup(struct irq_data *d)
 {
 	struct irq_desc *desc = irq_to_desc(d->irq);
#4 lore raw

PATCH 2/2 irqchip/gic-v3: Fix selection of partition domain for EPPIs

In reply to James Morse

commit 5f51f803826e ("irqchip/gic-v3: Add EPPI range support") added GIC_IRQ_TYPE_PARTITION support for EPPI to gic_irq_domain_translate(), and commit 52085d3f2028 ("irqchip/gic-v3: Dynamically allocate PPI partition descriptors") made the gic_data.ppi_descs array big enough for EPPI, but neither gic_irq_domain_select() nor partition_domain_translate() were updated.

This means partitions are created by partition_create_desc() for the EPPI range, but can't be registered as they will always match the root domain and map to the summary interrupt.

Update gic_irq_domain_select() to match PPI and EPPI. The fwspec for PPI and EPPI both start from 0. Use gic_irq_domain_translate() to find the hwirq from the fwspec, then convert this to a ppi index.

---
I'm not aware of a platform affected by this. If wanted as a fix, the tag would be:

Fixes 5f51f803826e ("irqchip/gic-v3: Add EPPI range support")

(and merge both patches)

---
 drivers/irqchip/irq-gic-v3.c | 48 ++++++++++++++++++++++++++++++------
 1 file changed, 41 insertions(+), 7 deletions(-)
drivers/irqchip/irq-gic-v3.c +41 -7
index b24f0a9d2876..8b6e9b2fc621 100644
@@ -1472,10 +1472,34 @@ static void gic_irq_domain_free(struct irq_domain *domain, unsigned int virq,
 	}
 }
 
+static bool fwspec_is_partitioned_ppi(struct irq_fwspec *fwspec,
+				      irq_hw_number_t hwirq)
+{
+	enum gic_intid_range range;
+
+	if (!gic_data.ppi_descs)
+		return false;
+
+	if (!is_of_node(fwspec->fwnode))
+		return false;
+
+	if (fwspec->param_count < 4 || !fwspec->param[3])
+		return false;
+
+	range = __get_intid_range(hwirq);
+	if (range != PPI_RANGE && range != EPPI_RANGE)
+		return false;
+
+	return true;
+}
+
 static int gic_irq_domain_select(struct irq_domain *d,
 				 struct irq_fwspec *fwspec,
 				 enum irq_domain_bus_token bus_token)
 {
+	unsigned int type, ret, ppi_idx;
+	irq_hw_number_t hwirq;
+
 	/* Not for us */
         if (fwspec->fwnode != d->fwnode)
 		return 0;
@@ -1484,16 +1508,19 @@ static int gic_irq_domain_select(struct irq_domain *d,
 	if (!is_of_node(fwspec->fwnode))
 		return 1;
 
+	ret = gic_irq_domain_translate(d, fwspec, &hwirq, &type);
+	if (WARN_ON_ONCE(ret))
+		return 0;
+
+	if (!fwspec_is_partitioned_ppi(fwspec, hwirq))
+		return d == gic_data.domain;
+
 	/*
 	 * If this is a PPI and we have a 4th (non-null) parameter,
 	 * then we need to match the partition domain.
 	 */
-	if (fwspec->param_count >= 4 &&
-	    fwspec->param[0] == 1 && fwspec->param[3] != 0 &&
-	    gic_data.ppi_descs)
-		return d == partition_get_domain(gic_data.ppi_descs[fwspec->param[1]]);
-
-	return d == gic_data.domain;
+	ppi_idx = __gic_get_ppi_index(hwirq);
+	return d == partition_get_domain(gic_data.ppi_descs[ppi_idx]);
 }
 
 static const struct irq_domain_ops gic_irq_domain_ops = {
@@ -1508,7 +1535,9 @@ static int partition_domain_translate(struct irq_domain *d,
 				      unsigned long *hwirq,
 				      unsigned int *type)
 {
+	unsigned long ppi_intid;
 	struct device_node *np;
+	unsigned int ppi_idx;
 	int ret;
 
 	if (!gic_data.ppi_descs)
@@ -1518,7 +1547,12 @@ static int partition_domain_translate(struct irq_domain *d,
 	if (WARN_ON(!np))
 		return -EINVAL;
 
-	ret = partition_translate_id(gic_data.ppi_descs[fwspec->param[1]],
+	ret = gic_irq_domain_translate(d, fwspec, &ppi_intid, type);
+	if (WARN_ON_ONCE(ret))
+		return 0;
+
+	ppi_idx = __gic_get_ppi_index(ppi_intid);
+	ret = partition_translate_id(gic_data.ppi_descs[ppi_idx],
 				     of_node_to_fwnode(np));
 	if (ret < 0)
 		return ret;
Signature · 1 line
2.30.2
Reviewed-by on v1 2/2
#5 lore raw
Quoted 11 lines · James Morse

commit 5f51f803826e ("irqchip/gic-v3: Add EPPI range support") added GIC_IRQ_TYPE_PARTITION support for EPPI to gic_irq_domain_translate(), and commit 52085d3f2028 ("irqchip/gic-v3: Dynamically allocate PPI partition descriptors") made the gic_data.ppi_descs array big enough for EPPI, but neither gic_irq_domain_select() nor partition_domain_translate() were updated.

This means partitions are created by partition_create_desc() for the EPPI range, but can't be registered as they will always match the root domain and map to the summary interrupt.

Quoted 6 lines

Update gic_irq_domain_select() to match PPI and EPPI. The fwspec for PPI and EPPI both start from 0. Use gic_irq_domain_translate() to find the hwirq from the fwspec, then convert this to a ppi index.

Tiny nit below, regardless:

drivers/irqchip/irq-gic-v3.c static int partition_domain_translate(struct irq_domain *d, · line 1550

Quoted 6 lines
drivers/irqchip/irq-gic-v3.c +1 -1
@@ -1518,7 +1547,12 @@ static int partition_domain_translate(struct irq_domain *d,
      if (WARN_ON(!np))
              return -EINVAL;
 
-	ret = partition_translate_id(gic_data.ppi_descs[fwspec->param[1]],
+	ret = gic_irq_domain_translate(d, fwspec, &ppi_intid, type);

This assigns @type for us, so the @type assignment at the tail of partition_domain_translate() becomes redundant.

Quoted 10 lines
drivers/irqchip/irq-gic-v3.c +5 -1
+	if (WARN_ON_ONCE(ret))
+		return 0;
+
+	ppi_idx = __gic_get_ppi_index(ppi_intid);
+	ret = partition_translate_id(gic_data.ppi_descs[ppi_idx],
                                   of_node_to_fwnode(np));
      if (ret < 0)
              return ret;
--

2.30.2

merge bot Applied
#6 lore raw
In reply to James Morse
The following commit has been merged into the irq/irqchip-next branch of irqchip:

The following commit has been merged into the irq/irqchip-next branch of irqchip:

Commit-ID:     d753f849bf487faffd05898e6a8e5aa9d146cb50
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms/d753f849bf487faffd05898e6a8e5aa9d146cb50
Author:        James Morse <[email protected]>
AuthorDate:    Thu, 29 Jul 2021 17:27:48 
Committer:     Marc Zyngier <[email protected]>
CommitterDate: Thu, 12 Aug 2021 08:11:03 +01:00

irqchip/gic-v3: Fix selection of partition domain for EPPIs

commit 5f51f803826e ("irqchip/gic-v3: Add EPPI range support") added GIC_IRQ_TYPE_PARTITION support for EPPI to gic_irq_domain_translate(), and commit 52085d3f2028 ("irqchip/gic-v3: Dynamically allocate PPI partition descriptors") made the gic_data.ppi_descs array big enough for EPPI, but neither gic_irq_domain_select() nor partition_domain_translate() were updated.

This means partitions are created by partition_create_desc() for the EPPI range, but can't be registered as they will always match the root domain and map to the summary interrupt.

Update gic_irq_domain_select() to match PPI and EPPI. The fwspec for PPI and EPPI both start from 0. Use gic_irq_domain_translate() to find the hwirq from the fwspec, then convert this to a ppi index.

---
 drivers/irqchip/irq-gic-v3.c | 48 +++++++++++++++++++++++++++++------
 1 file changed, 41 insertions(+), 7 deletions(-)
drivers/irqchip/irq-gic-v3.c +41 -7
index b24f0a9..8b6e9b2 100644
@@ -1472,10 +1472,34 @@ static void gic_irq_domain_free(struct irq_domain *domain, unsigned int virq,
 	}
 }
 
+static bool fwspec_is_partitioned_ppi(struct irq_fwspec *fwspec,
+				      irq_hw_number_t hwirq)
+{
+	enum gic_intid_range range;
+
+	if (!gic_data.ppi_descs)
+		return false;
+
+	if (!is_of_node(fwspec->fwnode))
+		return false;
+
+	if (fwspec->param_count < 4 || !fwspec->param[3])
+		return false;
+
+	range = __get_intid_range(hwirq);
+	if (range != PPI_RANGE && range != EPPI_RANGE)
+		return false;
+
+	return true;
+}
+
 static int gic_irq_domain_select(struct irq_domain *d,
 				 struct irq_fwspec *fwspec,
 				 enum irq_domain_bus_token bus_token)
 {
+	unsigned int type, ret, ppi_idx;
+	irq_hw_number_t hwirq;
+
 	/* Not for us */
         if (fwspec->fwnode != d->fwnode)
 		return 0;
@@ -1484,16 +1508,19 @@ static int gic_irq_domain_select(struct irq_domain *d,
 	if (!is_of_node(fwspec->fwnode))
 		return 1;
 
+	ret = gic_irq_domain_translate(d, fwspec, &hwirq, &type);
+	if (WARN_ON_ONCE(ret))
+		return 0;
+
+	if (!fwspec_is_partitioned_ppi(fwspec, hwirq))
+		return d == gic_data.domain;
+
 	/*
 	 * If this is a PPI and we have a 4th (non-null) parameter,
 	 * then we need to match the partition domain.
 	 */
-	if (fwspec->param_count >= 4 &&
-	    fwspec->param[0] == 1 && fwspec->param[3] != 0 &&
-	    gic_data.ppi_descs)
-		return d == partition_get_domain(gic_data.ppi_descs[fwspec->param[1]]);
-
-	return d == gic_data.domain;
+	ppi_idx = __gic_get_ppi_index(hwirq);
+	return d == partition_get_domain(gic_data.ppi_descs[ppi_idx]);
 }
 
 static const struct irq_domain_ops gic_irq_domain_ops = {
@@ -1508,7 +1535,9 @@ static int partition_domain_translate(struct irq_domain *d,
 				      unsigned long *hwirq,
 				      unsigned int *type)
 {
+	unsigned long ppi_intid;
 	struct device_node *np;
+	unsigned int ppi_idx;
 	int ret;
 
 	if (!gic_data.ppi_descs)
@@ -1518,7 +1547,12 @@ static int partition_domain_translate(struct irq_domain *d,
 	if (WARN_ON(!np))
 		return -EINVAL;
 
-	ret = partition_translate_id(gic_data.ppi_descs[fwspec->param[1]],
+	ret = gic_irq_domain_translate(d, fwspec, &ppi_intid, type);
+	if (WARN_ON_ONCE(ret))
+		return 0;
+
+	ppi_idx = __gic_get_ppi_index(ppi_intid);
+	ret = partition_translate_id(gic_data.ppi_descs[ppi_idx],
 				     of_node_to_fwnode(np));
 	if (ret < 0)
 		return ret;