arm: mach-snapdragon: misc: Initialize eMMC if necessary
Subsystems (2)
PATCH 1/2 arm: mach-snapdragon: misc: Initialize eMMC if necessary
At the moment U-Boot produces an empty MAC address (02:00:00:00:00:00) if the eMMC is not used by anything in U-Boot (e.g. with CONFIG_ENV_IS_NOWHERE=y instead of having the environment on eMMC). This happens because then there is nothing that actually initializes the eMMC and reads the "cid" that is later accessed.
To fix this, call mmc_init() to ensure the eMMC is initialized. There is no functional difference if the eMMC is already initialized since then mmc_init() will just return without doing anything.
---
arch/arm/mach-snapdragon/misc.c | 3 +++ 1 file changed, 3 insertions(+)
arch/arm/mach-snapdragon/misc.c +3 -0
@@ -33,6 +33,9 @@ u32 msm_board_serial(void)if (!mmc_dev)return 0 ; +if (mmc_init (mmc_dev)) +return 0 ; +return UNSTUFF_BITS (mmc_dev->cid,16 ,32 ); }
Signature · 1 line
2.32.0
PATCH 2/2 arm: mach-snapdrgon: misc: Simplify msm_generate_mac_addr()
The logic in msm_generate_mac_addr() was originally taken from the LK bootloader where the serial number is a string and must be parsed first. However, in U-Boot msm_board_serial() returns an u32 and msm_generate_mac_addr() has quite complicated code that will first print it as a hex string and then immediately parse it again.
What this function actually does at the end is to put the serial number encoded as big endian (the order used for the hex string) into the u8 *mac. Use put_unaligned_be32() to do that with bit shifts instead of going through the string format.
This should be slightly more efficient and cleaner but does not result in any functional difference.
---
arch/arm/mach-snapdragon/misc.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-)
arch/arm/mach-snapdragon/misc.c +3 -10
@@ -9,6 +9,7 @@#include <common.h> #include <mmc.h> #include <asm/arch/misc.h> +#include <asm/unaligned.h> /* UNSTUFF_BITS macro taken from Linux Kernel: drivers/mmc/core/sd.c */ #define UNSTUFF_BITS (resp, start, size) \
@@ -41,16 +42,8 @@ u32 msm_board_serial(void)void msm_generate_mac_addr (u8 *mac) { -int i; -char sn[9 ]; - -snprintf (sn,9 ,"%08x" ,msm_board_serial ()); -/* fill in the mac with serialno, use locally adminstrated pool */ mac[0 ] =0x02 ; - mac[1 ] =00 ; -for (i =3 ; i >=0 ; i--) { - mac[i +2 ] =simple_strtoul (&sn[2 * i],NULL ,16 ); - sn[2 * i] =0 ; - } + mac[1 ] =0x00 ; +put_unaligned_be32 (msm_board_serial (), &mac[2 ]); }
Signature · 1 line
2.32.0
Re: [PATCH 2/2] arm: mach-snapdrgon: misc: Simplify msm_generate_mac_addr()
Quoted 54 lines · Stephan Gerhold
The logic in
msm_generate_mac_addr()was originally taken from the LK bootloader where the serial number is a string and must be parsed first. However, in U-Bootmsm_board_serial()returns an u32 andmsm_generate_mac_addr()has quite complicated code that will first print it as a hex string and then immediately parse it again.What this function actually does at the end is to put the serial number encoded as big endian (the order used for the hex string) into the u8 *mac. Use
put_unaligned_be32()to do that with bit shifts instead of going through the string format.This should be slightly more efficient and cleaner but does not result in any functional difference.
Cc Ramon Fried <[email protected]>Signed-off-by Stephan Gerhold <[email protected]>---
arch/arm/mach-snapdragon/misc.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-)arch/arm/mach-snapdragon/misc.c +3
-11@@ -9,6 +9,7 @@#include <common.h> #include <mmc.h> #include <asm/arch/misc.h> +#include <asm/unaligned.h> /* UNSTUFF_BITS macro taken from Linux Kernel: drivers/mmc/core/sd.c */ #define UNSTUFF_BITS (resp, start, size) \@@ -41,16 +42,8 @@ u32 msm_board_serial(void)void msm_generate_mac_addr (u8 *mac) { -int i; -char sn[9 ]; - -snprintf (sn,9 ,"%08x" ,msm_board_serial ()); -/* fill in the mac with serialno, use locally adminstrated pool */ mac[0 ] =0x02 ; - mac[1 ] =00 ; -for (i =3 ; i >=0 ; i--) { - mac[i +2 ] =simple_strtoul (&sn[2 * i],NULL ,16 ); - sn[2 * i] =0 ; - } + mac[1 ] =0x00 ; +put_unaligned_be32 (msm_board_serial (), &mac[2 ]); } --
Quoted 2 lines
2.32.0
Please add a comment explaining the logic in the code. This is not understandable without explanation.
Thanks,
Ramon.
Quoted 33 lines · Stephan Gerhold
At the moment U-Boot produces an empty MAC address (02:00:00:00:00:00) if the eMMC is not used by anything in U-Boot (e.g. with
CONFIG_ENV_IS_NOWHERE=yinstead of having the environment on eMMC). This happens because then there is nothing that actually initializes the eMMC and reads the "cid" that is later accessed.To fix this, call
mmc_init()to ensure the eMMC is initialized. There is no functional difference if the eMMC is already initialized since thenmmc_init()will just return without doing anything.Cc Ramon Fried <[email protected]>Signed-off-by Stephan Gerhold <[email protected]>---
arch/arm/mach-snapdragon/misc.c | 3 +++ 1 file changed, 3 insertions(+)arch/arm/mach-snapdragon/misc.c +3
-1@@ -33,6 +33,9 @@ u32 msm_board_serial(void)if (!mmc_dev)return 0 ; +if (mmc_init (mmc_dev)) +return 0 ; +return UNSTUFF_BITS (mmc_dev->cid,16 ,32 ); } --
Quoted 2 lines
2.32.0