Skip to contentSkip to conversation

qapi: introduce 'query-x86-cpuid' QMP command.

PATCH Superseded Valeriy Vdovin 3 participants 4 messages Aug 10, 2021 KVM

v14 of 15 Superseded Latest is v15 →

lore
Share & tools
lore
#0 lore raw

PATCH v14 1/1 qapi: introduce 'query-x86-cpuid' QMP command.

From: Valeriy Vdovin <[email protected]>

Introducing new QMP command 'query-x86-cpuid'. This command can be used to get virtualized cpu model info generated by QEMU during VM initialization in the form of cpuid representation.

Diving into more details about virtual CPU generation: QEMU first parses '-cpu' command line option. From there it takes the name of the model as the basis for feature set of the new virtual CPU. After that it uses trailing '-cpu' options, that state if additional cpu features should be present on the virtual CPU or excluded from it (tokens '+'/'-' or '=on'/'=off').
After that QEMU checks if the host's cpu can actually support the derived feature set and applies host limitations to it.
After this initialization procedure, virtual CPU has it's model and vendor names, and a working feature set and is ready for identification instructions such as CPUID.

To learn exactly how virtual CPU is presented to the guest machine via CPUID instruction, new QMP command can be used. By calling 'query-x86-cpuid' command, one can get a full listing of all CPUID leaves with subleaves which are supported by the initialized virtual CPU.

Other than debug, the command is useful in cases when we would like to utilize QEMU's virtual CPU initialization routines and put the retrieved values into kernel CPUID overriding mechanics for more precise control over how various processes perceive its underlying hardware with container processes as a good example.

The command is specific to x86. It is currenly only implemented for KVM acceleator.

Output format:
The output is a plain list of leaf/subleaf argument combinations, that return 4 words in registers EAX, EBX, ECX, EDX.

Use example:
qmp_request: {
"execute": "query-x86-cpuid"
}

qmp_response: {
"return": [

    {
      "eax": 1073741825,
      "edx": 77,
      "in-eax": 1073741824,
      "ecx": 1447775574,
      "ebx": 1263359563
    },
    {
      "eax": 16777339,
      "edx": 0,
      "in-eax": 1073741825,
      "ecx": 0,
      "ebx": 0
    },
    {
      "eax": 13,
      "edx": 1231384169,
      "in-eax": 0,
      "ecx": 1818588270,
      "ebx": 1970169159
    },
    {
      "eax": 198354,
      "edx": 126614527,
      "in-eax": 1,
      "ecx": 2176328193,
      "ebx": 2048
    },
    ....
    {
      "eax": 12328,
      "edx": 0,
      "in-eax": 2147483656,
      "ecx": 0,
      "ebx": 0
    }

]
}

---
v2: - Removed leaf/subleaf iterators.
- Modified cpu_x86_cpuid to return false in cases when count is greater than supported subleaves.
v3: - Fixed structure name coding style.
- Added more comments
- Ensured buildability for non-x86 targets.
v4: - Fixed cpu_x86_cpuid return value logic and handling of 0xA leaf.
- Fixed comments.
- Removed target check in qmp_query_cpu_model_cpuid.
v5: - Added error handling code in qmp_query_cpu_model_cpuid
v6: - Fixed error handling code. Added method to query_error_class
v7: - Changed implementation in favor of cached cpuid_data for
KVM_SET_CPUID2
v8: - Renamed qmp method to query-kvm-cpuid and some fields in response.
- Modified documentation to qmp method
- Removed helper struct declaration
v9: - Renamed 'in_eax' / 'in_ecx' fields to 'in-eax' / 'in-ecx'
- Pasted more complete response to commit message.
v10:
- Subject changed
- Fixes in commit message
- Small fixes in QMP command docs
v11:
- Added explanation about CONFIG_KVM to the commit message.
v12:
- Changed title from query-kvm-cpuid to query-x86-cpuid
- Removed CONFIG_KVM ifdefs
- Added detailed error messages for some stub/unimplemented cases.
v13:
- Tagged with since 6.2
v14:
- Rebased to latest master 632eda54043d6f26ff87dac16233e14b4708b967
- Added note about error return cases in api documentation.

 qapi/machine-target.json   | 46 ++++++++++++++++++++++++++++++++++
 softmmu/cpus.c             |  2 +-
 target/i386/kvm/kvm-stub.c | 10 ++++++++
 target/i386/kvm/kvm.c      | 51 ++++++++++++++++++++++++++++++++++++++
 tests/qtest/qmp-cmd-test.c |  1 +
 5 files changed, 109 insertions(+), 1 deletion(-)
qapi/machine-target.json +46 -0
index e7811654b7..71648a4f56 100644
@@ -329,3 +329,49 @@
 ##
 { 'command': 'query-cpu-definitions', 'returns': ['CpuDefinitionInfo'],
   'if': 'defined(TARGET_PPC) || defined(TARGET_ARM) || defined(TARGET_I386) || defined(TARGET_S390X) || defined(TARGET_MIPS)' }
+
+##
+# @CpuidEntry:
+#
+# A single entry of a CPUID response.
+#
+# One entry holds full set of information (leaf) returned to the guest
+# in response to it calling a CPUID instruction with eax, ecx used as
+# the arguments to that instruction. ecx is an optional argument as
+# not all of the leaves support it.
+#
+# @in-eax: CPUID argument in eax
+# @in-ecx: CPUID argument in ecx
+# @eax: CPUID result in eax
+# @ebx: CPUID result in ebx
+# @ecx: CPUID result in ecx
+# @edx: CPUID result in edx
+#
+# Since: 6.2
+##
+{ 'struct': 'CpuidEntry',
+  'data': { 'in-eax' : 'uint32',
+            '*in-ecx' : 'uint32',
+            'eax' : 'uint32',
+            'ebx' : 'uint32',
+            'ecx' : 'uint32',
+            'edx' : 'uint32'
+          },
+  'if': 'defined(TARGET_I386)' }
+
+##
+# @query-x86-cpuid:
+#
+# Returns raw data from the emulated CPUID table for the first VCPU.
+# The emulated CPUID table defines the response to the CPUID
+# instruction when executed by the guest operating system.
+# 
+#
+# Returns: a list of CpuidEntry. Returns error when qemu is configured with
+# --disable-kvm flag or if qemu is run with any other accelerator than KVM.
+#
+# Since: 6.2
+##
+{ 'command': 'query-x86-cpuid',
+  'returns': ['CpuidEntry'],
+  'if': 'defined(TARGET_I386)' }
softmmu/cpus.c +1 -1
index 071085f840..8501081897 100644
@@ -129,7 +129,7 @@ void hw_error(const char *fmt, ...)
 /*
  * The chosen accelerator is supposed to register this.
  */
-static const AccelOpsClass *cpus_accel;
+const AccelOpsClass *cpus_accel;
 
 void cpu_synchronize_all_states(void)
 {
target/i386/kvm/kvm-stub.c +10 -0
index f6e7e4466e..9eb04d908f 100644
@@ -12,6 +12,7 @@
 #include "qemu/osdep.h"
 #include "cpu.h"
 #include "kvm_i386.h"
+#include "qapi/error.h"
 
 #ifndef __OPTIMIZE__
 bool kvm_has_smm(void)
@@ -44,3 +45,12 @@ bool kvm_hyperv_expand_features(X86CPU *cpu, Error **errp)
 {
     abort();
 }
+
+typedef struct CpuidEntryList CpuidEntryList;
+CpuidEntryList *qmp_query_x86_cpuid(Error **errp);
+
+CpuidEntryList *qmp_query_x86_cpuid(Error **errp)
+{
+    error_setg(errp, "Not implemented in --disable-kvm configuration");
+    return NULL;
+}
target/i386/kvm/kvm.c +51 -0

74 lines not on this page · raw message

tests/qtest/qmp-cmd-test.c +1 -0
index c98b78d033..bd883f7f52 100644
@@ -46,6 +46,7 @@ static int query_error_class(const char *cmd)
         { "query-balloon", ERROR_CLASS_DEVICE_NOT_ACTIVE },
         { "query-hotpluggable-cpus", ERROR_CLASS_GENERIC_ERROR },
         { "query-vm-generation-id", ERROR_CLASS_GENERIC_ERROR },
+        { "query-x86-cpuid", ERROR_CLASS_GENERIC_ERROR },
         { NULL, -1 }
     };
     int i;
Signature · 1 line
2.17.1
#1 lore raw
Quoted 234 lines · Valeriy Vdovin

From: Valeriy Vdovin <[email protected]>

Introducing new QMP command 'query-x86-cpuid'. This command can be used to get virtualized cpu model info generated by QEMU during VM initialization in the form of cpuid representation.

Diving into more details about virtual CPU generation: QEMU first parses '-cpu' command line option. From there it takes the name of the model as the basis for feature set of the new virtual CPU. After that it uses trailing '-cpu' options, that state if additional cpu features should be present on the virtual CPU or excluded from it (tokens '+'/'-' or '=on'/'=off').
After that QEMU checks if the host's cpu can actually support the derived feature set and applies host limitations to it.
After this initialization procedure, virtual CPU has it's model and vendor names, and a working feature set and is ready for identification instructions such as CPUID.

To learn exactly how virtual CPU is presented to the guest machine via CPUID instruction, new QMP command can be used. By calling 'query-x86-cpuid' command, one can get a full listing of all CPUID leaves with subleaves which are supported by the initialized virtual CPU.

Other than debug, the command is useful in cases when we would like to utilize QEMU's virtual CPU initialization routines and put the retrieved values into kernel CPUID overriding mechanics for more precise control over how various processes perceive its underlying hardware with container processes as a good example.

The command is specific to x86. It is currenly only implemented for KVM acceleator.

Output format:
The output is a plain list of leaf/subleaf argument combinations, that return 4 words in registers EAX, EBX, ECX, EDX.

Use example:
qmp_request: {
"execute": "query-x86-cpuid"
}

qmp_response: {
"return": [

    {
      "eax": 1073741825,
      "edx": 77,
      "in-eax": 1073741824,
      "ecx": 1447775574,
      "ebx": 1263359563
    },
    {
      "eax": 16777339,
      "edx": 0,
      "in-eax": 1073741825,
      "ecx": 0,
      "ebx": 0
    },
    {
      "eax": 13,
      "edx": 1231384169,
      "in-eax": 0,
      "ecx": 1818588270,
      "ebx": 1970169159
    },
    {
      "eax": 198354,
      "edx": 126614527,
      "in-eax": 1,
      "ecx": 2176328193,
      "ebx": 2048
    },
    ....
    {
      "eax": 12328,
      "edx": 0,
      "in-eax": 2147483656,
      "ecx": 0,
      "ebx": 0
    }

]
}

---
v2: - Removed leaf/subleaf iterators.
- Modified cpu_x86_cpuid to return false in cases when count is greater than supported subleaves.
v3: - Fixed structure name coding style.
- Added more comments
- Ensured buildability for non-x86 targets.
v4: - Fixed cpu_x86_cpuid return value logic and handling of 0xA leaf.
- Fixed comments.
- Removed target check in qmp_query_cpu_model_cpuid.
v5: - Added error handling code in qmp_query_cpu_model_cpuid
v6: - Fixed error handling code. Added method to query_error_class
v7: - Changed implementation in favor of cached cpuid_data for
KVM_SET_CPUID2
v8: - Renamed qmp method to query-kvm-cpuid and some fields in response.
- Modified documentation to qmp method
- Removed helper struct declaration
v9: - Renamed 'in_eax' / 'in_ecx' fields to 'in-eax' / 'in-ecx'
- Pasted more complete response to commit message.
v10:
- Subject changed
- Fixes in commit message
- Small fixes in QMP command docs
v11:
- Added explanation about CONFIG_KVM to the commit message.
v12:
- Changed title from query-kvm-cpuid to query-x86-cpuid
- Removed CONFIG_KVM ifdefs
- Added detailed error messages for some stub/unimplemented cases.
v13:
- Tagged with since 6.2
v14:
- Rebased to latest master 632eda54043d6f26ff87dac16233e14b4708b967
- Added note about error return cases in api documentation.

 qapi/machine-target.json   | 46 ++++++++++++++++++++++++++++++++++
 softmmu/cpus.c             |  2 +-
 target/i386/kvm/kvm-stub.c | 10 ++++++++
 target/i386/kvm/kvm.c      | 51 ++++++++++++++++++++++++++++++++++++++
 tests/qtest/qmp-cmd-test.c |  1 +
 5 files changed, 109 insertions(+), 1 deletion(-)
qapi/machine-target.json +46 -0
index e7811654b7..71648a4f56 100644
@@ -329,3 +329,49 @@
 ##
 { 'command': 'query-cpu-definitions', 'returns': ['CpuDefinitionInfo'],
   'if': 'defined(TARGET_PPC) || defined(TARGET_ARM) || defined(TARGET_I386) || defined(TARGET_S390X) || defined(TARGET_MIPS)' }
+
+##
+# @CpuidEntry:
+#
+# A single entry of a CPUID response.
+#
+# One entry holds full set of information (leaf) returned to the guest
+# in response to it calling a CPUID instruction with eax, ecx used as
+# the arguments to that instruction. ecx is an optional argument as
+# not all of the leaves support it.
+#
+# @in-eax: CPUID argument in eax
+# @in-ecx: CPUID argument in ecx
+# @eax: CPUID result in eax
+# @ebx: CPUID result in ebx
+# @ecx: CPUID result in ecx
+# @edx: CPUID result in edx
+#
+# Since: 6.2
+##
+{ 'struct': 'CpuidEntry',
+  'data': { 'in-eax' : 'uint32',
+            '*in-ecx' : 'uint32',
+            'eax' : 'uint32',
+            'ebx' : 'uint32',
+            'ecx' : 'uint32',
+            'edx' : 'uint32'
+          },
+  'if': 'defined(TARGET_I386)' }
+
+##
+# @query-x86-cpuid:
+#
+# Returns raw data from the emulated CPUID table for the first VCPU.
+# The emulated CPUID table defines the response to the CPUID
+# instruction when executed by the guest operating system.
+# 
+#
+# Returns: a list of CpuidEntry. Returns error when qemu is configured with
+# --disable-kvm flag or if qemu is run with any other accelerator than KVM.
+#
+# Since: 6.2
+##
+{ 'command': 'query-x86-cpuid',
+  'returns': ['CpuidEntry'],
+  'if': 'defined(TARGET_I386)' }
softmmu/cpus.c +1 -1
index 071085f840..8501081897 100644
@@ -129,7 +129,7 @@ void hw_error(const char *fmt, ...)
 /*
  * The chosen accelerator is supposed to register this.
  */
-static const AccelOpsClass *cpus_accel;
+const AccelOpsClass *cpus_accel;
 
 void cpu_synchronize_all_states(void)
 {
target/i386/kvm/kvm-stub.c +10 -0
index f6e7e4466e..9eb04d908f 100644
@@ -12,6 +12,7 @@
 #include "qemu/osdep.h"
 #include "cpu.h"
 #include "kvm_i386.h"
+#include "qapi/error.h"
 
 #ifndef __OPTIMIZE__
 bool kvm_has_smm(void)
@@ -44,3 +45,12 @@ bool kvm_hyperv_expand_features(X86CPU *cpu, Error **errp)
 {
     abort();
 }
+
+typedef struct CpuidEntryList CpuidEntryList;
+CpuidEntryList *qmp_query_x86_cpuid(Error **errp);
+
+CpuidEntryList *qmp_query_x86_cpuid(Error **errp)
+{
+    error_setg(errp, "Not implemented in --disable-kvm configuration");
+    return NULL;
+}
target/i386/kvm/kvm.c +2 -0
index e69abe48e3..28e79cd0cf 100644
@@ -20,11 +20,13 @@
 
 #include <linux/kvm.h>
 #include "standard-headers/asm-x86/kvm_para.h"
+#include "qapi/qapi-commands-machine-target.h"
 
 #include "cpu.h"
 #include "host-cpu.h"
 #include "sysemu/sysemu.h"
 #include "sysemu/hw_accel.h"
+#include "sysemu/accel-ops.h"
 #include "sysemu/kvm_int.h"
 #include "sysemu/runstate.h"
 #include "kvm_i386.h"

target/i386/kvm/kvm.c static Error *invtsc_mig_blocker; · line 1550

Quoted 9 lines
target/i386/kvm/kvm.c +6 -0
@@ -1540,6 +1542,51 @@ static Error *invtsc_mig_blocker;
 
 #define KVM_MAX_CPUID_ENTRIES  100
 
+struct kvm_cpuid2 *cpuid_data_cached;
+extern const AccelOpsClass *cpus_accel;
+
+static inline int is_kvm_accel(AccelOpsClass *class)
+{
+    ObjectClass *parent_class;

We normally call ObjectClass variables 'oc'.

target/i386/kvm/kvm.c static Error *invtsc_mig_blocker; · line 1552

Quoted 2 lines
target/i386/kvm/kvm.c +2 -0
+
+    parent_class = &class->parent_class;

The right way to cast a class/object to a different type is to use the type casting macros. e.g.:

    oc = OBJECT_CLASS(class);

target/i386/kvm/kvm.c static Error *invtsc_mig_blocker; · line 1554

Quoted 2 lines
target/i386/kvm/kvm.c +2 -0
+    return strcmp(object_class_get_name(parent_class),
+        "kvm-accel-ops") == 0;

You should never do a string comparison of the QOM type name to decide what to do. If you want to know if a class implements a specific type, you can just call:

object_class_dynamic_cast(class, TYPE_KVM_ACCEL)

In either case, this function can probably be deleted and replaced with a simple kvm_enabled() call (see below).

target/i386/kvm/kvm.c static Error *invtsc_mig_blocker; · line 1565

Quoted 11 lines
target/i386/kvm/kvm.c +11 -0
+}
+
+CpuidEntryList *qmp_query_x86_cpuid(Error **errp)
+{
+    int i;
+    struct kvm_cpuid_entry2 *kvm_entry;
+    CpuidEntryList *head = NULL, **tail = &head;
+    CpuidEntry *entry;
+
+    if (!cpuid_data_cached) {
+         if (cpus_accel && !is_kvm_accel((AccelOpsClass *)cpus_accel))

This can be replaced by a kvm_enabled() check.

Also, I suggest avoid nesting conditionals when possible. e.g.:

  if (!kvm_enabled()) {
      error_setg(...);
      return NULL;
  }
  if (!cpuid_data_cached) {
      error_setg(...);
      return NULL;
  }
Quoted 53 lines
target/i386/kvm/kvm.c +28 -0
+             error_setg(errp, "Not implemented for non-kvm accel");
+         else
+             error_setg(errp, "VCPU was not initialized yet");
+         return NULL;
+    }
+
+    for (i = 0; i < cpuid_data_cached->nent; ++i) {
+        kvm_entry = &cpuid_data_cached->entries[i];
+        entry = g_malloc0(sizeof(*entry));
+        entry->in_eax = kvm_entry->function;
+        if (kvm_entry->flags & KVM_CPUID_FLAG_SIGNIFCANT_INDEX) {
+            entry->in_ecx = kvm_entry->index;
+            entry->has_in_ecx = true;
+        }
+        entry->eax = kvm_entry->eax;
+        entry->ebx = kvm_entry->ebx;
+        entry->ecx = kvm_entry->ecx;
+        entry->edx = kvm_entry->edx;
+        QAPI_LIST_APPEND(tail, entry);
+    }
+
+    return head;
+}
+
 int kvm_arch_init_vcpu(CPUState *cs)
 {
     struct {
@@ -1923,6 +1970,10 @@ int kvm_arch_init_vcpu(CPUState *cs)
     if (r) {
         goto fail;
     }
+    if (!cpuid_data_cached) {
+        cpuid_data_cached = g_malloc0(sizeof(cpuid_data));
+        memcpy(cpuid_data_cached, &cpuid_data, sizeof(cpuid_data));
+    }
 
     if (has_xsave) {
         env->xsave_buf_len = sizeof(struct kvm_xsave);
tests/qtest/qmp-cmd-test.c +1 -0
index c98b78d033..bd883f7f52 100644
@@ -46,6 +46,7 @@ static int query_error_class(const char *cmd)
         { "query-balloon", ERROR_CLASS_DEVICE_NOT_ACTIVE },
         { "query-hotpluggable-cpus", ERROR_CLASS_GENERIC_ERROR },
         { "query-vm-generation-id", ERROR_CLASS_GENERIC_ERROR },
+        { "query-x86-cpuid", ERROR_CLASS_GENERIC_ERROR },
         { NULL, -1 }
     };
     int i;
Signature · 1 line
2.17.1
Signature · 1 line
Eduardo
#2 lore raw
In reply to Valeriy Vdovin
Quoted 203 lines · Valeriy Vdovin

From: Valeriy Vdovin <[email protected]>

Introducing new QMP command 'query-x86-cpuid'. This command can be used to get virtualized cpu model info generated by QEMU during VM initialization in the form of cpuid representation.

Diving into more details about virtual CPU generation: QEMU first parses '-cpu' command line option. From there it takes the name of the model as the basis for feature set of the new virtual CPU. After that it uses trailing '-cpu' options, that state if additional cpu features should be present on the virtual CPU or excluded from it (tokens '+'/'-' or '=on'/'=off').
After that QEMU checks if the host's cpu can actually support the derived feature set and applies host limitations to it.
After this initialization procedure, virtual CPU has it's model and vendor names, and a working feature set and is ready for identification instructions such as CPUID.

To learn exactly how virtual CPU is presented to the guest machine via CPUID instruction, new QMP command can be used. By calling 'query-x86-cpuid' command, one can get a full listing of all CPUID leaves with subleaves which are supported by the initialized virtual CPU.

Other than debug, the command is useful in cases when we would like to utilize QEMU's virtual CPU initialization routines and put the retrieved values into kernel CPUID overriding mechanics for more precise control over how various processes perceive its underlying hardware with container processes as a good example.

The command is specific to x86. It is currenly only implemented for KVM acceleator.

Output format:
The output is a plain list of leaf/subleaf argument combinations, that return 4 words in registers EAX, EBX, ECX, EDX.

Use example:
qmp_request: {
"execute": "query-x86-cpuid"
}

qmp_response: {
"return": [

    {
      "eax": 1073741825,
      "edx": 77,
      "in-eax": 1073741824,
      "ecx": 1447775574,
      "ebx": 1263359563
    },
    {
      "eax": 16777339,
      "edx": 0,
      "in-eax": 1073741825,
      "ecx": 0,
      "ebx": 0
    },
    {
      "eax": 13,
      "edx": 1231384169,
      "in-eax": 0,
      "ecx": 1818588270,
      "ebx": 1970169159
    },
    {
      "eax": 198354,
      "edx": 126614527,
      "in-eax": 1,
      "ecx": 2176328193,
      "ebx": 2048
    },
    ....
    {
      "eax": 12328,
      "edx": 0,
      "in-eax": 2147483656,
      "ecx": 0,
      "ebx": 0
    }

]
}

---
v2: - Removed leaf/subleaf iterators.
- Modified cpu_x86_cpuid to return false in cases when count is greater than supported subleaves.
v3: - Fixed structure name coding style.
- Added more comments
- Ensured buildability for non-x86 targets.
v4: - Fixed cpu_x86_cpuid return value logic and handling of 0xA leaf.
- Fixed comments.
- Removed target check in qmp_query_cpu_model_cpuid.
v5: - Added error handling code in qmp_query_cpu_model_cpuid
v6: - Fixed error handling code. Added method to query_error_class
v7: - Changed implementation in favor of cached cpuid_data for
KVM_SET_CPUID2
v8: - Renamed qmp method to query-kvm-cpuid and some fields in response.
- Modified documentation to qmp method
- Removed helper struct declaration
v9: - Renamed 'in_eax' / 'in_ecx' fields to 'in-eax' / 'in-ecx'
- Pasted more complete response to commit message.
v10:
- Subject changed
- Fixes in commit message
- Small fixes in QMP command docs
v11:
- Added explanation about CONFIG_KVM to the commit message.
v12:
- Changed title from query-kvm-cpuid to query-x86-cpuid
- Removed CONFIG_KVM ifdefs
- Added detailed error messages for some stub/unimplemented cases.
v13:
- Tagged with since 6.2
v14:
- Rebased to latest master 632eda54043d6f26ff87dac16233e14b4708b967
- Added note about error return cases in api documentation.

 qapi/machine-target.json   | 46 ++++++++++++++++++++++++++++++++++
 softmmu/cpus.c             |  2 +-
 target/i386/kvm/kvm-stub.c | 10 ++++++++
 target/i386/kvm/kvm.c      | 51 ++++++++++++++++++++++++++++++++++++++
 tests/qtest/qmp-cmd-test.c |  1 +
 5 files changed, 109 insertions(+), 1 deletion(-)
qapi/machine-target.json +46 -0
index e7811654b7..71648a4f56 100644
@@ -329,3 +329,49 @@
 ##
 { 'command': 'query-cpu-definitions', 'returns': ['CpuDefinitionInfo'],
   'if': 'defined(TARGET_PPC) || defined(TARGET_ARM) || defined(TARGET_I386) || defined(TARGET_S390X) || defined(TARGET_MIPS)' }
+
+##
+# @CpuidEntry:
+#
+# A single entry of a CPUID response.
+#
+# One entry holds full set of information (leaf) returned to the guest
+# in response to it calling a CPUID instruction with eax, ecx used as
+# the arguments to that instruction. ecx is an optional argument as
+# not all of the leaves support it.
+#
+# @in-eax: CPUID argument in eax
+# @in-ecx: CPUID argument in ecx
+# @eax: CPUID result in eax
+# @ebx: CPUID result in ebx
+# @ecx: CPUID result in ecx
+# @edx: CPUID result in edx
+#
+# Since: 6.2
+##
+{ 'struct': 'CpuidEntry',
+  'data': { 'in-eax' : 'uint32',
+            '*in-ecx' : 'uint32',
+            'eax' : 'uint32',
+            'ebx' : 'uint32',
+            'ecx' : 'uint32',
+            'edx' : 'uint32'
+          },
+  'if': 'defined(TARGET_I386)' }
+
+##
+# @query-x86-cpuid:
+#
+# Returns raw data from the emulated CPUID table for the first VCPU.
+# The emulated CPUID table defines the response to the CPUID
+# instruction when executed by the guest operating system.
+# 
+#
+# Returns: a list of CpuidEntry. Returns error when qemu is configured with
+# --disable-kvm flag or if qemu is run with any other accelerator than KVM.
+#
+# Since: 6.2
+##
+{ 'command': 'query-x86-cpuid',
+  'returns': ['CpuidEntry'],
+  'if': 'defined(TARGET_I386)' }
softmmu/cpus.c +1 -1
index 071085f840..8501081897 100644
@@ -129,7 +129,7 @@ void hw_error(const char *fmt, ...)
 /*
  * The chosen accelerator is supposed to register this.
  */
-static const AccelOpsClass *cpus_accel;
+const AccelOpsClass *cpus_accel;
 
 void cpu_synchronize_all_states(void)
 {
target/i386/kvm/kvm-stub.c +1 -0
index f6e7e4466e..9eb04d908f 100644
@@ -12,6 +12,7 @@
 #include "qemu/osdep.h"
 #include "cpu.h"
 #include "kvm_i386.h"
+#include "qapi/error.h"
 
 #ifndef __OPTIMIZE__
 bool kvm_has_smm(void)

target/i386/kvm/kvm-stub.c bool kvm_hyperv_expand_features(X86CPU *cpu, Error **errp) · line 49

Quoted 5 lines
target/i386/kvm/kvm-stub.c +2 -0
@@ -44,3 +45,12 @@ bool kvm_hyperv_expand_features(X86CPU *cpu, Error **errp)
 {
     abort();
 }
+
+typedef struct CpuidEntryList CpuidEntryList;

Isn't the typedef QAPI-generated?

Quoted 26 lines
target/i386/kvm/kvm-stub.c +7 -0
+CpuidEntryList *qmp_query_x86_cpuid(Error **errp);
+
+CpuidEntryList *qmp_query_x86_cpuid(Error **errp)
+{
+    error_setg(errp, "Not implemented in --disable-kvm configuration");
+    return NULL;
+}
target/i386/kvm/kvm.c +2 -0
index e69abe48e3..28e79cd0cf 100644
@@ -20,11 +20,13 @@
 
 #include <linux/kvm.h>
 #include "standard-headers/asm-x86/kvm_para.h"
+#include "qapi/qapi-commands-machine-target.h"
 
 #include "cpu.h"
 #include "host-cpu.h"
 #include "sysemu/sysemu.h"
 #include "sysemu/hw_accel.h"
+#include "sysemu/accel-ops.h"
 #include "sysemu/kvm_int.h"
 #include "sysemu/runstate.h"
 #include "kvm_i386.h"

target/i386/kvm/kvm.c static Error *invtsc_mig_blocker; · line 1546

Quoted 5 lines
target/i386/kvm/kvm.c +2 -0
@@ -1540,6 +1542,51 @@ static Error *invtsc_mig_blocker;
 
 #define KVM_MAX_CPUID_ENTRIES  100
 
+struct kvm_cpuid2 *cpuid_data_cached;
+extern const AccelOpsClass *cpus_accel;

Nack. Declarations go in headers.

You might want to look at
https://www.mail-archive.com/[email protected]/msg827317.html
and rebase your series on it.

Quoted 70 lines
target/i386/kvm/kvm.c +47 -0
+
+static inline int is_kvm_accel(AccelOpsClass *class)
+{
+    ObjectClass *parent_class;
+
+    parent_class = &class->parent_class;
+    return strcmp(object_class_get_name(parent_class),
+        "kvm-accel-ops") == 0;
+}
+
+CpuidEntryList *qmp_query_x86_cpuid(Error **errp)
+{
+    int i;
+    struct kvm_cpuid_entry2 *kvm_entry;
+    CpuidEntryList *head = NULL, **tail = &head;
+    CpuidEntry *entry;
+
+    if (!cpuid_data_cached) {
+         if (cpus_accel && !is_kvm_accel((AccelOpsClass *)cpus_accel))
+             error_setg(errp, "Not implemented for non-kvm accel");
+         else
+             error_setg(errp, "VCPU was not initialized yet");
+         return NULL;
+    }
+
+    for (i = 0; i < cpuid_data_cached->nent; ++i) {
+        kvm_entry = &cpuid_data_cached->entries[i];
+        entry = g_malloc0(sizeof(*entry));
+        entry->in_eax = kvm_entry->function;
+        if (kvm_entry->flags & KVM_CPUID_FLAG_SIGNIFCANT_INDEX) {
+            entry->in_ecx = kvm_entry->index;
+            entry->has_in_ecx = true;
+        }
+        entry->eax = kvm_entry->eax;
+        entry->ebx = kvm_entry->ebx;
+        entry->ecx = kvm_entry->ecx;
+        entry->edx = kvm_entry->edx;
+        QAPI_LIST_APPEND(tail, entry);
+    }
+
+    return head;
+}
+
 int kvm_arch_init_vcpu(CPUState *cs)
 {
     struct {
@@ -1923,6 +1970,10 @@ int kvm_arch_init_vcpu(CPUState *cs)
     if (r) {
         goto fail;
     }
+    if (!cpuid_data_cached) {
+        cpuid_data_cached = g_malloc0(sizeof(cpuid_data));
+        memcpy(cpuid_data_cached, &cpuid_data, sizeof(cpuid_data));
+    }
 
     if (has_xsave) {
         env->xsave_buf_len = sizeof(struct kvm_xsave);
tests/qtest/qmp-cmd-test.c +1 -0
index c98b78d033..bd883f7f52 100644
@@ -46,6 +46,7 @@ static int query_error_class(const char *cmd)
         { "query-balloon", ERROR_CLASS_DEVICE_NOT_ACTIVE },
         { "query-hotpluggable-cpus", ERROR_CLASS_GENERIC_ERROR },
         { "query-vm-generation-id", ERROR_CLASS_GENERIC_ERROR },
+        { "query-x86-cpuid", ERROR_CLASS_GENERIC_ERROR },
         { NULL, -1 }
     };
     int i;
#3 lore raw
In reply to Valeriy Vdovin
Quoted 28 lines · Valeriy Vdovin

From: Valeriy Vdovin <[email protected]>

Introducing new QMP command 'query-x86-cpuid'. This command can be used to get virtualized cpu model info generated by QEMU during VM initialization in the form of cpuid representation.

Diving into more details about virtual CPU generation: QEMU first parses '-cpu' command line option. From there it takes the name of the model as the basis for feature set of the new virtual CPU. After that it uses trailing '-cpu' options, that state if additional cpu features should be present on the virtual CPU or excluded from it (tokens '+'/'-' or '=on'/'=off').
After that QEMU checks if the host's cpu can actually support the derived feature set and applies host limitations to it.
After this initialization procedure, virtual CPU has it's model and vendor names, and a working feature set and is ready for identification instructions such as CPUID.

To learn exactly how virtual CPU is presented to the guest machine via CPUID instruction, new QMP command can be used. By calling 'query-x86-cpuid' command, one can get a full listing of all CPUID leaves with subleaves which are supported by the initialized virtual CPU.

Other than debug, the command is useful in cases when we would like to utilize QEMU's virtual CPU initialization routines and put the retrieved values into kernel CPUID overriding mechanics for more precise control over how various processes perceive its underlying hardware with container processes as a good example.

Quoted 6 lines

The command is specific to x86. It is currenly only implemented for KVM acceleator.

Output format:
The output is a plain list of leaf/subleaf argument combinations, that return 4 words in registers EAX, EBX, ECX, EDX.

[...]

Based on the effort being required from you to make sure this patch is in good shape, maybe you could reconsider my suggestion from a while ago for a single-CPUID-leaf interface, as discussed at:
https://lore.kernel.org/qemu-devel/[email protected]/

A single-CPUID-leaf qmp_query_x86_cpuid() function that is generic and not KVM-specific can probably be implemented in ~5 lines of code.

I'm not against the interface proposed here, but you are surely going to get more friction and more complexity to deal with.

Signature · 1 line
Eduardo