Skip to contentSkip to conversation

kbuild: Fix TRIM_UNUSED_KSYMS with LTO_CLANG

PATCH Superseded Sami Tolvanen 2 participants 3 messages Aug 12, 2021 – Aug 16, 2021 Kbuild

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 kbuild: Fix TRIM_UNUSED_KSYMS with LTO_CLANG

With CONFIG_LTO_CLANG, we currently link modules into native code just before modpost, which means with TRIM_UNUSED_KSYMS enabled, we still look at the LLVM bitcode in the .o files when generating the list of used symbols. As the bitcode doesn't yet have calls to compiler intrinsics and llvm-nm doesn't see function references that only exist in function-level inline assembly, we currently need a whitelist for TRIM_UNUSED_KSYMS to work with LTO.

This change moves module LTO linking to happen earlier, and thus avoids the issue with LLVM bitcode and TRIM_UNUSED_KSYMS entirely, allowing us to also drop the whitelist from gen_autoksyms.sh.

---
Changes in v3:
- Added missing FORCE.

Changes in v2:
- Fixed a couple of typos.
- Fixed objtool arguments for .lto.o to always include --module.

---
 scripts/Makefile.build    | 24 +++++++++++++++++++++++-
 scripts/Makefile.lib      |  7 +++++++
 scripts/Makefile.modfinal | 21 ++-------------------
 scripts/Makefile.modpost  | 22 +++-------------------
 scripts/gen_autoksyms.sh  | 12 ------------
 5 files changed, 35 insertions(+), 51 deletions(-)
scripts/Makefile.build +23 -1
index 02197cb8e3a7..524701d9896b 100644
@@ -271,12 +271,34 @@ $(obj)/%.o: $(src)/%.c $(recordmcount_source) $$(objtool_dep) FORCE
 	$(call if_changed_rule,cc_o_c)
 	$(call cmd,force_checksrc)
 
+ifdef CONFIG_LTO_CLANG
+# Module .o files may contain LLVM bitcode, compile them into native code
+# before ELF processing
+quiet_cmd_cc_lto_link_modules = LTO [M] $@
+cmd_cc_lto_link_modules =						\
+	$(LD) $(ld_flags) -r -o $@					\
+		$(shell [ -s $(@:.lto.o=.o.symversions) ] &&		\
+			echo -T $(@:.lto.o=.o.symversions))		\
+		--whole-archive $(filter-out FORCE,$^)
+
+ifdef CONFIG_STACK_VALIDATION
+# objtool was skipped for LLVM bitcode, run it now that we have compiled
+# modules into native code
+cmd_cc_lto_link_modules += ;						\
+	$(objtree)/tools/objtool/objtool $(objtool_args) --module	\
+		$(@:.ko=$(mod-prelink-ext).o)
+endif
+
+$(obj)/%.lto.o: $(obj)/%.o FORCE
+	$(call if_changed,cc_lto_link_modules)
+endif
+
 cmd_mod = { \
 	echo $(if $($*-objs)$($*-y)$($*-m), $(addprefix $(obj)/, $($*-objs) $($*-y) $($*-m)), $(@:.mod=.o)); \
 	$(undefined_syms) echo; \
 	} > $@
 
-$(obj)/%.mod: $(obj)/%.o FORCE
+$(obj)/%.mod: $(obj)/%$(mod-prelink-ext).o FORCE
 	$(call if_changed,mod)
 
 quiet_cmd_cc_lst_c = MKLST   $@
scripts/Makefile.lib +7 -0
index 10950559b223..af1c920a585c 100644
@@ -225,6 +225,13 @@ dtc_cpp_flags  = -Wp,-MMD,$(depfile).pre.tmp -nostdinc                    \
 		 $(addprefix -I,$(DTC_INCLUDE))                          \
 		 -undef -D__DTS__
 
+ifeq ($(CONFIG_LTO_CLANG),y)
+# With CONFIG_LTO_CLANG, .o files in modules might be LLVM bitcode, so we
+# need to run LTO to compile them into native code (.lto.o) before further
+# processing.
+mod-prelink-ext := .lto
+endif
+
 # Objtool arguments are also needed for modfinal with LTO, so we define
 # then here to avoid duplication.
 objtool_args =								\
scripts/Makefile.modfinal +2 -19
index 5e9b8057fb24..ff805777431c 100644
@@ -9,7 +9,7 @@ __modfinal:
 include include/config/auto.conf
 include $(srctree)/scripts/Kbuild.include
 
-# for c_flags and objtool_args
+# for c_flags and mod-prelink-ext
 include $(srctree)/scripts/Makefile.lib
 
 # find all modules listed in modules.order
@@ -30,23 +30,6 @@ quiet_cmd_cc_o_c = CC [M]  $@
 
 ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(SRCARCH)/Makefile.postlink)
 
-ifdef CONFIG_LTO_CLANG
-# With CONFIG_LTO_CLANG, reuse the object file we compiled for modpost to
-# avoid a second slow LTO link
-prelink-ext := .lto
-
-# ELF processing was skipped earlier because we didn't have native code,
-# so let's now process the prelinked binary before we link the module.
-
-ifdef CONFIG_STACK_VALIDATION
-cmd_ld_ko_o +=								\
-	$(objtree)/tools/objtool/objtool $(objtool_args)		\
-		$(@:.ko=$(prelink-ext).o);
-
-endif # CONFIG_STACK_VALIDATION
-
-endif # CONFIG_LTO_CLANG
-
 quiet_cmd_ld_ko_o = LD [M]  $@
       cmd_ld_ko_o +=							\
 	$(LD) -r $(KBUILD_LDFLAGS)					\
@@ -72,7 +55,7 @@ if_changed_except = $(if $(call newer_prereqs_except,$(2))$(cmd-check),      \
 
 
 # Re-generate module BTFs if either module's .ko or vmlinux changed
-$(modules): %.ko: %$(prelink-ext).o %.mod.o scripts/module.lds $(if $(KBUILD_BUILTIN),vmlinux) FORCE
+$(modules): %.ko: %$(mod-prelink-ext).o %.mod.o scripts/module.lds $(if $(KBUILD_BUILTIN),vmlinux) FORCE
 	+$(call if_changed_except,ld_ko_o,vmlinux)
 ifdef CONFIG_DEBUG_INFO_BTF_MODULES
 	+$(if $(newer-prereqs),$(call cmd,btf_ko))
scripts/Makefile.modpost +3 -19
index c383ba33d837..eef56d629799 100644
@@ -41,7 +41,7 @@ __modpost:
 include include/config/auto.conf
 include $(srctree)/scripts/Kbuild.include
 
-# for ld_flags
+# for mod-prelink-ext
 include $(srctree)/scripts/Makefile.lib
 
 MODPOST = scripts/mod/modpost								\
@@ -118,22 +118,6 @@ $(input-symdump):
 	@echo >&2 '         Modules may not have dependencies or modversions.'
 	@echo >&2 '         You may get many unresolved symbol warnings.'
 
-ifdef CONFIG_LTO_CLANG
-# With CONFIG_LTO_CLANG, .o files might be LLVM bitcode, so we need to run
-# LTO to compile them into native code before running modpost
-prelink-ext := .lto
-
-quiet_cmd_cc_lto_link_modules = LTO [M] $@
-cmd_cc_lto_link_modules =						\
-	$(LD) $(ld_flags) -r -o $@					\
-		$(shell [ -s $(@:.lto.o=.o.symversions) ] &&		\
-			echo -T $(@:.lto.o=.o.symversions))		\
-		--whole-archive $^
-
-%.lto.o: %.o
-	$(call if_changed,cc_lto_link_modules)
-endif
-
 modules := $(sort $(shell cat $(MODORDER)))
 
 # KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined symbols
@@ -144,9 +128,9 @@ endif
 # Read out modules.order to pass in modpost.
 # Otherwise, allmodconfig would fail with "Argument list too long".
 quiet_cmd_modpost = MODPOST $@
-      cmd_modpost = sed 's/\.ko$$/$(prelink-ext)\.o/' $< | $(MODPOST) -T -
+      cmd_modpost = sed 's/\.ko$$/$(mod-prelink-ext)\.o/' $< | $(MODPOST) -T -
 
-$(output-symdump): $(MODORDER) $(input-symdump) $(modules:.ko=$(prelink-ext).o) FORCE
+$(output-symdump): $(MODORDER) $(input-symdump) $(modules:.ko=$(mod-prelink-ext).o) FORCE
 	$(call if_changed,modpost)
 
 targets += $(output-symdump)
scripts/gen_autoksyms.sh +0 -12
index da320151e7c3..6ed0d225c8b1 100755
@@ -26,18 +26,6 @@ if [ -n "$CONFIG_MODVERSIONS" ]; then
 	needed_symbols="$needed_symbols module_layout"
 fi
 
-# With CONFIG_LTO_CLANG, LLVM bitcode has not yet been compiled into a binary
-# when the .mod files are generated, which means they don't yet contain
-# references to certain symbols that will be present in the final binaries.
-if [ -n "$CONFIG_LTO_CLANG" ]; then
-	# intrinsic functions
-	needed_symbols="$needed_symbols memcpy memmove memset"
-	# ftrace
-	needed_symbols="$needed_symbols _mcount"
-	# stack protector symbols
-	needed_symbols="$needed_symbols __stack_chk_fail __stack_chk_guard"
-fi
-
 ksym_wl=
 if [ -n "$CONFIG_UNUSED_KSYMS_WHITELIST" ]; then
 	# Use 'eval' to expand the whitelist path and check if it is relative

base-commit: f8fbb47c6e86c0b75f8df864db702c3e3f757361

Signature · 1 line
2.33.0.rc1.237.g0d66db33f3-goog
#1 lore raw
Quoted 15 lines · Sami Tolvanen' via Clang Built Linux

With CONFIG_LTO_CLANG, we currently link modules into native code just before modpost, which means with TRIM_UNUSED_KSYMS enabled, we still look at the LLVM bitcode in the .o files when generating the list of used symbols. As the bitcode doesn't yet have calls to compiler intrinsics and llvm-nm doesn't see function references that only exist in function-level inline assembly, we currently need a whitelist for TRIM_UNUSED_KSYMS to work with LTO.

This change moves module LTO linking to happen earlier, and thus avoids the issue with LLVM bitcode and TRIM_UNUSED_KSYMS entirely, allowing us to also drop the whitelist from gen_autoksyms.sh.

Quoted 7 lines

---
Changes in v3:
- Added missing FORCE.

All the modules are recompiled every time.

masahiro@oscar:~/workspace/linux-kbuild$ make LLVM=1 LLVM_IAS=1  -j24
  DESCEND objtool
  CALL    scripts/atomic/check-atomics.sh
  CALL    scripts/checksyscalls.sh
  CHK     include/generated/compile.h
  LTO [M] net/netfilter/nf_log_syslog.lto.o
  LTO [M] net/netfilter/xt_mark.lto.o
  LTO [M] net/netfilter/xt_nat.lto.o
  LTO [M] net/netfilter/xt_LOG.lto.o
  LTO [M] drivers/thermal/intel/x86_pkg_temp_thermal.lto.o
  LTO [M] net/netfilter/xt_MASQUERADE.lto.o
  LTO [M] net/netfilter/xt_addrtype.lto.o
  LTO [M] fs/efivarfs/efivarfs.lto.o
  LTO [M] net/ipv4/netfilter/iptable_nat.lto.o
  CHK     include/generated/autoksyms.h
  MODPOST modules-only.symvers
  GEN     Module.symvers
  LD [M]  drivers/thermal/intel/x86_pkg_temp_thermal.ko
  LD [M]  fs/efivarfs/efivarfs.ko
  LD [M]  net/ipv4/netfilter/iptable_nat.ko
  LD [M]  net/netfilter/nf_log_syslog.ko
  LD [M]  net/netfilter/xt_LOG.ko
  LD [M]  net/netfilter/xt_MASQUERADE.ko
  LD [M]  net/netfilter/xt_addrtype.ko
  LD [M]  net/netfilter/xt_mark.ko
  LD [M]  net/netfilter/xt_nat.ko
Kernel: arch/x86/boot/bzImage is ready  (#20)
Quoted 196 lines

Changes in v2:
- Fixed a couple of typos.
- Fixed objtool arguments for .lto.o to always include --module.

---
 scripts/Makefile.build    | 24 +++++++++++++++++++++++-
 scripts/Makefile.lib      |  7 +++++++
 scripts/Makefile.modfinal | 21 ++-------------------
 scripts/Makefile.modpost  | 22 +++-------------------
 scripts/gen_autoksyms.sh  | 12 ------------
 5 files changed, 35 insertions(+), 51 deletions(-)
scripts/Makefile.build +23 -1
index 02197cb8e3a7..524701d9896b 100644
@@ -271,12 +271,34 @@ $(obj)/%.o: $(src)/%.c $(recordmcount_source) $$(objtool_dep) FORCE
        $(call if_changed_rule,cc_o_c)
        $(call cmd,force_checksrc)
 
+ifdef CONFIG_LTO_CLANG
+# Module .o files may contain LLVM bitcode, compile them into native code
+# before ELF processing
+quiet_cmd_cc_lto_link_modules = LTO [M] $@
+cmd_cc_lto_link_modules =                                              \
+       $(LD) $(ld_flags) -r -o $@                                      \
+               $(shell [ -s $(@:.lto.o=.o.symversions) ] &&            \
+                       echo -T $(@:.lto.o=.o.symversions))             \
+               --whole-archive $(filter-out FORCE,$^)
+
+ifdef CONFIG_STACK_VALIDATION
+# objtool was skipped for LLVM bitcode, run it now that we have compiled
+# modules into native code
+cmd_cc_lto_link_modules += ;                                           \
+       $(objtree)/tools/objtool/objtool $(objtool_args) --module       \
+               $(@:.ko=$(mod-prelink-ext).o)
+endif
+
+$(obj)/%.lto.o: $(obj)/%.o FORCE
+       $(call if_changed,cc_lto_link_modules)
+endif
+
 cmd_mod = { \
        echo $(if $($*-objs)$($*-y)$($*-m), $(addprefix $(obj)/, $($*-objs) $($*-y) $($*-m)), $(@:.mod=.o)); \
        $(undefined_syms) echo; \
        } > $@
 
-$(obj)/%.mod: $(obj)/%.o FORCE
+$(obj)/%.mod: $(obj)/%$(mod-prelink-ext).o FORCE
        $(call if_changed,mod)
 
 quiet_cmd_cc_lst_c = MKLST   $@
scripts/Makefile.lib +7 -0
index 10950559b223..af1c920a585c 100644
@@ -225,6 +225,13 @@ dtc_cpp_flags  = -Wp,-MMD,$(depfile).pre.tmp -nostdinc                    \
                 $(addprefix -I,$(DTC_INCLUDE))                          \
                 -undef -D__DTS__
 
+ifeq ($(CONFIG_LTO_CLANG),y)
+# With CONFIG_LTO_CLANG, .o files in modules might be LLVM bitcode, so we
+# need to run LTO to compile them into native code (.lto.o) before further
+# processing.
+mod-prelink-ext := .lto
+endif
+
 # Objtool arguments are also needed for modfinal with LTO, so we define
 # then here to avoid duplication.
 objtool_args =                                                         \
scripts/Makefile.modfinal +2 -19
index 5e9b8057fb24..ff805777431c 100644
@@ -9,7 +9,7 @@ __modfinal:
 include include/config/auto.conf
 include $(srctree)/scripts/Kbuild.include
 
-# for c_flags and objtool_args
+# for c_flags and mod-prelink-ext
 include $(srctree)/scripts/Makefile.lib
 
 # find all modules listed in modules.order
@@ -30,23 +30,6 @@ quiet_cmd_cc_o_c = CC [M]  $@
 
 ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(SRCARCH)/Makefile.postlink)
 
-ifdef CONFIG_LTO_CLANG
-# With CONFIG_LTO_CLANG, reuse the object file we compiled for modpost to
-# avoid a second slow LTO link
-prelink-ext := .lto
-
-# ELF processing was skipped earlier because we didn't have native code,
-# so let's now process the prelinked binary before we link the module.
-
-ifdef CONFIG_STACK_VALIDATION
-cmd_ld_ko_o +=                                                         \
-       $(objtree)/tools/objtool/objtool $(objtool_args)                \
-               $(@:.ko=$(prelink-ext).o);
-
-endif # CONFIG_STACK_VALIDATION
-
-endif # CONFIG_LTO_CLANG
-
 quiet_cmd_ld_ko_o = LD [M]  $@
       cmd_ld_ko_o +=                                                   \
        $(LD) -r $(KBUILD_LDFLAGS)                                      \
@@ -72,7 +55,7 @@ if_changed_except = $(if $(call newer_prereqs_except,$(2))$(cmd-check),      \
 
 
 # Re-generate module BTFs if either module's .ko or vmlinux changed
-$(modules): %.ko: %$(prelink-ext).o %.mod.o scripts/module.lds $(if $(KBUILD_BUILTIN),vmlinux) FORCE
+$(modules): %.ko: %$(mod-prelink-ext).o %.mod.o scripts/module.lds $(if $(KBUILD_BUILTIN),vmlinux) FORCE
        +$(call if_changed_except,ld_ko_o,vmlinux)
 ifdef CONFIG_DEBUG_INFO_BTF_MODULES
        +$(if $(newer-prereqs),$(call cmd,btf_ko))
scripts/Makefile.modpost +3 -19
index c383ba33d837..eef56d629799 100644
@@ -41,7 +41,7 @@ __modpost:
 include include/config/auto.conf
 include $(srctree)/scripts/Kbuild.include
 
-# for ld_flags
+# for mod-prelink-ext
 include $(srctree)/scripts/Makefile.lib
 
 MODPOST = scripts/mod/modpost                                                          \
@@ -118,22 +118,6 @@ $(input-symdump):
        @echo >&2 '         Modules may not have dependencies or modversions.'
        @echo >&2 '         You may get many unresolved symbol warnings.'
 
-ifdef CONFIG_LTO_CLANG
-# With CONFIG_LTO_CLANG, .o files might be LLVM bitcode, so we need to run
-# LTO to compile them into native code before running modpost
-prelink-ext := .lto
-
-quiet_cmd_cc_lto_link_modules = LTO [M] $@
-cmd_cc_lto_link_modules =                                              \
-       $(LD) $(ld_flags) -r -o $@                                      \
-               $(shell [ -s $(@:.lto.o=.o.symversions) ] &&            \
-                       echo -T $(@:.lto.o=.o.symversions))             \
-               --whole-archive $^
-
-%.lto.o: %.o
-       $(call if_changed,cc_lto_link_modules)
-endif
-
 modules := $(sort $(shell cat $(MODORDER)))
 
 # KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined symbols
@@ -144,9 +128,9 @@ endif
 # Read out modules.order to pass in modpost.
 # Otherwise, allmodconfig would fail with "Argument list too long".
 quiet_cmd_modpost = MODPOST $@
-      cmd_modpost = sed 's/\.ko$$/$(prelink-ext)\.o/' $< | $(MODPOST) -T -
+      cmd_modpost = sed 's/\.ko$$/$(mod-prelink-ext)\.o/' $< | $(MODPOST) -T -
 
-$(output-symdump): $(MODORDER) $(input-symdump) $(modules:.ko=$(prelink-ext).o) FORCE
+$(output-symdump): $(MODORDER) $(input-symdump) $(modules:.ko=$(mod-prelink-ext).o) FORCE
        $(call if_changed,modpost)
 
 targets += $(output-symdump)
scripts/gen_autoksyms.sh +0 -12
index da320151e7c3..6ed0d225c8b1 100755
@@ -26,18 +26,6 @@ if [ -n "$CONFIG_MODVERSIONS" ]; then
        needed_symbols="$needed_symbols module_layout"
 fi
 
-# With CONFIG_LTO_CLANG, LLVM bitcode has not yet been compiled into a binary
-# when the .mod files are generated, which means they don't yet contain
-# references to certain symbols that will be present in the final binaries.
-if [ -n "$CONFIG_LTO_CLANG" ]; then
-       # intrinsic functions
-       needed_symbols="$needed_symbols memcpy memmove memset"
-       # ftrace
-       needed_symbols="$needed_symbols _mcount"
-       # stack protector symbols
-       needed_symbols="$needed_symbols __stack_chk_fail __stack_chk_guard"
-fi
-
 ksym_wl=
 if [ -n "$CONFIG_UNUSED_KSYMS_WHITELIST" ]; then
        # Use 'eval' to expand the whitelist path and check if it is relative

base-commit: f8fbb47c6e86c0b75f8df864db702c3e3f757361 --
2.33.0.rc1.237.g0d66db33f3-goog

--
You received this message because you are subscribed to the Google Groups "Clang Built Linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/clang-built-linux/20210812214614.1797845-1-samitolvanen%40google.com.

Signature · 2 lines
Best Regards
Masahiro Yamada
#2 lore raw
Quoted 28 lines · Masahiro Yamada
Quoted 15 lines · Sami Tolvanen' via Clang Built Linux

With CONFIG_LTO_CLANG, we currently link modules into native code just before modpost, which means with TRIM_UNUSED_KSYMS enabled, we still look at the LLVM bitcode in the .o files when generating the list of used symbols. As the bitcode doesn't yet have calls to compiler intrinsics and llvm-nm doesn't see function references that only exist in function-level inline assembly, we currently need a whitelist for TRIM_UNUSED_KSYMS to work with LTO.

This change moves module LTO linking to happen earlier, and thus avoids the issue with LLVM bitcode and TRIM_UNUSED_KSYMS entirely, allowing us to also drop the whitelist from gen_autoksyms.sh.

Quoted 7 lines

---
Changes in v3:
- Added missing FORCE.

Quoted 1 line

All the modules are recompiled every time.

Oops, .lto.o is missing from targets still, which breaks if_changed. Fixed in v4. Thanks for testing!

Sami