mm: hwpoison: don't drop slab caches for offlining non-LRU page
PATCH 1/2 mm: hwpoison: don't drop slab caches for offlining non-LRU page
In the current implementation of soft offline, if non-LRU page is met, all the slab caches will be dropped to free the page then offline. But if the page is not slab page all the effort is wasted in vain. Even though it is a slab page, it is not guaranteed the page could be freed at all.
However the side effect and cost is quite high. It does not only drop the slab caches, but also may drop a significant amount of page caches which are associated with inode caches. It could make the most workingset gone in order to just offline a page. And the offline is not guaranteed to succeed at all, actually I really doubt the success rate for real life workload.
Furthermore the worse consequence is the system may be locked up and unusable since the page cache release may incur huge amount of works queued for memcg release.
Actually we ran into such unpleasant case in our production environment. Firstly, the workqueue of memory_failure_work_func is locked up as below:
BUG: workqueue lockup - pool cpus=1 node=0 flags=0x0 nice=0 stuck for 53s!
Showing busy workqueues and worker pools:
workqueue events: flags=0x0
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=14/256 refcnt=15
in-flight: 409271:memory_failure_work_func
pending: kfree_rcu_work, kfree_rcu_monitor, kfree_rcu_work, rht_deferred_worker, rht_deferred_worker, rht_deferred_worker, rht_deferred_worker, kfree_rcu_work, kfree_rcu_work, kfree_rcu_work, kfree_rcu_work, drain_local_stock, kfree_rcu_work workqueue mm_percpu_wq: flags=0x8
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
pending: vmstat_update
workqueue cgroup_destroy: flags=0x0
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=1/1 refcnt=12072
pending: css_release_work_fn
There were over 12K css_release_work_fn queued, and this caused a few lockups due to the contention of worker pool lock with IRQ disabled, for example:
NMI watchdog: Watchdog detected hard LOCKUP on cpu 1
Modules linked in: amd64_edac_mod edac_mce_amd crct10dif_pclmul crc32_pclmul ghash_clmulni_intel xt_DSCP iptable_mangle kvm_amd bpfilter vfat fat acpi_ipmi i2c_piix4 usb_storage ipmi_si k10temp i2c_core ipmi_devintf ipmi_msghandler acpi_cpufreq sch_fq_codel xfs libcrc32c crc32c_intel mlx5_core mlxfw nvme xhci_pci ptp nvme_core pps_core xhci_hcd CPU: 1 PID: 205500 Comm: kworker/1:0 Tainted: G L 5.10.32-t1.el7.twitter.x86_64 #1 Hardware name: TYAN F5AMT /z /S8026GM2NRE-CGN, BIOS V8.030 03/30/2021 Workqueue: events memory_failure_work_func RIP: 0010:queued_spin_lock_slowpath+0x41/0x1a0 Code: 41 f0 0f ba 2f 08 0f 92 c0 0f b6 c0 c1 e0 08 89 c2 8b 07 30 e4 09 d0 a9 00 01 ff ff 75 1b 85 c0 74 0e 8b 07 84 c0 74 08 f3 90 <8b> 07 84 c0 75 f8 b8 01 00 00 00 66 89 07 c3 f6 c4 01 75 04 c6 47 RSP: 0018:ffff9b2ac278f900 EFLAGS: 00000002 RAX: 0000000000480101 RBX: ffff8ce98ce71800 RCX: 0000000000000084 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8ce98ce6a140 RBP: 00000000000284c8 R08: ffffd7248dcb6808 R09: 0000000000000000 R10: 0000000000000003 R11: ffff9b2ac278f9b0 R12: 0000000000000001 R13: ffff8cb44dab9c00 R14: ffffffffbd1ce6a0 R15: ffff8cacaa37f068 FS: 0000000000000000(0000) GS:ffff8ce98ce40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcf6e8cb000 CR3: 0000000a0c60a000 CR4: 0000000000350ee0 Call Trace: __queue_work+0xd6/0x3c0 queue_work_on+0x1c/0x30 uncharge_batch+0x10e/0x110 mem_cgroup_uncharge_list+0x6d/0x80 release_pages+0x37f/0x3f0 __pagevec_release+0x1c/0x50 __invalidate_mapping_pages+0x348/0x380 ? xfs_alloc_buftarg+0xa4/0x120 [xfs] inode_lru_isolate+0x10a/0x160 ? iput+0x1d0/0x1d0 __list_lru_walk_one+0x7b/0x170 ? iput+0x1d0/0x1d0 list_lru_walk_one+0x4a/0x60 prune_icache_sb+0x37/0x50 super_cache_scan+0x123/0x1a0 do_shrink_slab+0x10c/0x2c0 shrink_slab+0x1f1/0x290 drop_slab_node+0x4d/0x70 soft_offline_page+0x1ac/0x5b0 ? dev_mce_log+0xee/0x110 ? notifier_call_chain+0x39/0x90 memory_failure_work_func+0x6a/0x90 process_one_work+0x19e/0x340 ? process_one_work+0x340/0x340 worker_thread+0x30/0x360 ? process_one_work+0x340/0x340 kthread+0x116/0x130
The lockup made the machine is quite unusable. And it also made the most workingset gone, the reclaimabled slab caches were reduced from 12G to 300MB, the page caches were decreased from 17G to 4G.
But the most disappointing thing is all the effort doesn't make the page offline, it just returns:
soft_offline: 0x1469f2: unknown non LRU page type 5ffff0000000000 ()
It seems the aggressive behavior for non-LRU page didn't pay back, so it doesn't make too much sense to keep it considering the terrible side effect.
--- include/linux/mm.h | 2 +- mm/hwpoison-inject.c | 2 +- mm/memory-failure.c | 16 +++++----------- 3 files changed, 7 insertions(+), 13 deletions(-)
include/linux/mm.h +1 -1
@@ -3215,7 +3215,7 @@ extern void memory_failure_queue_kick(int cpu);extern int unpoison_memory (unsigned long pfn);extern int sysctl_memory_failure_early_kill;extern int sysctl_memory_failure_recovery; -extern void shake_page (struct page *p,int access); +extern void shake_page (struct page *p);extern atomic_long_t num_poisoned_pages__read_mostly ;extern int soft_offline_page (unsigned long pfn,int flags);
mm/hwpoison-inject.c +1 -1
@@ -30,7 +30,7 @@ static int hwpoison_inject(void *data, u64 val)if (!hwpoison_filter_enable) goto inject; -shake_page (hpage,0 ); +shake_page (hpage);/* * This implies unable to support non-LRU pages. */
mm/memory-failure.c +5 -11
@@ -282,9 +282,9 @@ static int kill_proc(struct to_kill *tk, unsigned long pfn, int flags)/* * Unknown page type encountered. Try to check whether it can turn PageLRU by -* lru_add_drain_all, or a free page by reclaiming slabs when possible. +* lru_add_drain_all. */ -void shake_page (struct page *p,int access) +void shake_page (struct page *p) {if (PageHuge (p))return ;
@@ -295,12 +295,6 @@ void shake_page(struct page *p, int access)return ; } -/* -* Only call shrink_node_slabs here (which would also shrink -* other caches) if access is not potentially fatal. -*/ -if (access) -drop_slab_node (page_to_nid (p)); }EXPORT_SYMBOL_GPL (shake_page);
@@ -1215,7 +1209,7 @@ static int get_any_page(struct page *p, unsigned long flags)*/ if (pass++ <3 ) {put_page (p); -shake_page (p,1 ); +shake_page (p); count_increased = false; goto try_again; }
@@ -1363,7 +1357,7 @@ static bool hwpoison_user_mappings(struct page *p, unsigned long pfn,* shake_page() again to ensure that it's flushed. */ if (mlocked) -shake_page (hpage,0 ); +shake_page (hpage);/* * Now that the dirty bit has been propagated to the
@@ -1718,7 +1712,7 @@ int memory_failure(unsigned long pfn, int flags)* The check (unnecessarily) ignores LRU pages being isolated and * walked by the page reclaim code, however that's not a big loss. */ -shake_page (p,0 ); +shake_page (p);lock_page (p);
Signature · 1 line
2.26.2
PATCH 2/2 doc: hwpoison: correct the support for hugepage
The hwpoison support for huge page, both hugetlb and THP, has been in kernel for a while, the statement in document is obsolete, correct it.
--- Documentation/vm/hwpoison.rst | 1 - 1 file changed, 1 deletion(-)
Documentation/vm/hwpoison.rst +0 -1
@@ -180,7 +180,6 @@ Limitations =========== - Not all page types are supported and never will. Most kernel internal objects cannot be recovered, only LRU pages for now. -- Right now hugepage support is missing. --- Andi Kleen, Oct 2009
Signature · 1 line
2.26.2
Re: [PATCH 2/2] doc: hwpoison: correct the support for hugepage
Quoted 6 lines · Yang Shi
The hwpoison support for huge page, both hugetlb and THP, has been in kernel for a while, the statement in document is obsolete, correct it.
Cc Naoya Horiguchi <[email protected]>Cc Oscar Salvador <[email protected]>Signed-off-by Yang Shi <[email protected]>
Thank you!
Quoted 74 lines · Yang Shi
In the current implementation of soft offline, if non-LRU page is met, all the slab caches will be dropped to free the page then offline. But if the page is not slab page all the effort is wasted in vain. Even though it is a slab page, it is not guaranteed the page could be freed at all.
However the side effect and cost is quite high. It does not only drop the slab caches, but also may drop a significant amount of page caches which are associated with inode caches. It could make the most workingset gone in order to just offline a page. And the offline is not guaranteed to succeed at all, actually I really doubt the success rate for real life workload.
Furthermore the worse consequence is the system may be locked up and unusable since the page cache release may incur huge amount of works queued for memcg release.
Actually we ran into such unpleasant case in our production environment. Firstly, the workqueue of
memory_failure_work_funcis locked up as below:BUG: workqueue lockup - pool cpus=1 node=0 flags=0x0 nice=0 stuck for 53s!Showing busy workqueues and worker pools:
workqueue events: flags=0x0
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=14/256 refcnt=15
in-flight: 409271:memory_failure_work_func
pending:kfree_rcu_work,kfree_rcu_monitor,kfree_rcu_work,rht_deferred_worker,rht_deferred_worker,rht_deferred_worker,rht_deferred_worker,kfree_rcu_work,kfree_rcu_work,kfree_rcu_work,kfree_rcu_work,drain_local_stock,kfree_rcu_work
workqueuemm_percpu_wq: flags=0x8
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
pending:vmstat_update
workqueuecgroup_destroy: flags=0x0
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=1/1 refcnt=12072
pending:css_release_work_fnThere were over 12K
css_release_work_fnqueued, and this caused a few lockups due to the contention of worker pool lock with IRQ disabled, for example:NMI watchdog: Watchdog detected hard LOCKUP on cpu 1
Modules linked in: amd64_edac_mod edac_mce_amd crct10dif_pclmul crc32_pclmul ghash_clmulni_intel xt_DSCP iptable_mangle kvm_amd bpfilter vfat fat acpi_ipmi i2c_piix4 usb_storage ipmi_si k10temp i2c_core ipmi_devintf ipmi_msghandler acpi_cpufreq sch_fq_codel xfs libcrc32c crc32c_intel mlx5_core mlxfw nvme xhci_pci ptp nvme_core pps_core xhci_hcd CPU: 1 PID: 205500 Comm: kworker/1:0 Tainted: G L 5.10.32-t1.el7.twitter.x86_64 #1 Hardware name: TYAN F5AMT /z /S8026GM2NRE-CGN, BIOS V8.030 03/30/2021 Workqueue: events memory_failure_work_func RIP: 0010:queued_spin_lock_slowpath+0x41/0x1a0 Code: 41 f0 0f ba 2f 08 0f 92 c0 0f b6 c0 c1 e0 08 89 c2 8b 07 30 e4 09 d0 a9 00 01 ff ff 75 1b 85 c0 74 0e 8b 07 84 c0 74 08 f3 90 <8b> 07 84 c0 75 f8 b8 01 00 00 00 66 89 07 c3 f6 c4 01 75 04 c6 47 RSP: 0018:ffff9b2ac278f900 EFLAGS: 00000002 RAX: 0000000000480101 RBX: ffff8ce98ce71800 RCX: 0000000000000084 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8ce98ce6a140 RBP: 00000000000284c8 R08: ffffd7248dcb6808 R09: 0000000000000000 R10: 0000000000000003 R11: ffff9b2ac278f9b0 R12: 0000000000000001 R13: ffff8cb44dab9c00 R14: ffffffffbd1ce6a0 R15: ffff8cacaa37f068 FS: 0000000000000000(0000) GS:ffff8ce98ce40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcf6e8cb000 CR3: 0000000a0c60a000 CR4: 0000000000350ee0 Call Trace: __queue_work+0xd6/0x3c0 queue_work_on+0x1c/0x30 uncharge_batch+0x10e/0x110 mem_cgroup_uncharge_list+0x6d/0x80 release_pages+0x37f/0x3f0 __pagevec_release+0x1c/0x50 __invalidate_mapping_pages+0x348/0x380 ? xfs_alloc_buftarg+0xa4/0x120 [xfs] inode_lru_isolate+0x10a/0x160 ? iput+0x1d0/0x1d0 __list_lru_walk_one+0x7b/0x170 ? iput+0x1d0/0x1d0 list_lru_walk_one+0x4a/0x60 prune_icache_sb+0x37/0x50 super_cache_scan+0x123/0x1a0 do_shrink_slab+0x10c/0x2c0 shrink_slab+0x1f1/0x290 drop_slab_node+0x4d/0x70 soft_offline_page+0x1ac/0x5b0
Quoted 8 lines
? dev_mce_log+0xee/0x110 ? notifier_call_chain+0x39/0x90 memory_failure_work_func+0x6a/0x90 process_one_work+0x19e/0x340 ? process_one_work+0x340/0x340 worker_thread+0x30/0x360 ? process_one_work+0x340/0x340 kthread+0x116/0x130
Just curious, who actually ends up calling soft_offline_page() ? I cannot really make sense of this, looking at upstream Linux.
I can spot
a) drivers/base/memory.c: /sys/devices/system/memory/soft_offline_page seems to be a testing interface
b) MADV_SOFT_OFFLINE seems to be a testing interface as well
c) arch/parisc/kernel/pdt.c doesn't apply to your case I guess?
I'm just wondering who ends up calling soft_offline_page() in a production environment and via which call path. I'm most probably missing something.
Signature · 3 lines
Thanks, David / dhildenb
Quoted 92 lines · David Hildenbrand
Quoted 74 lines · Yang Shi
In the current implementation of soft offline, if non-LRU page is met, all the slab caches will be dropped to free the page then offline. But if the page is not slab page all the effort is wasted in vain. Even though it is a slab page, it is not guaranteed the page could be freed at all.
However the side effect and cost is quite high. It does not only drop the slab caches, but also may drop a significant amount of page caches which are associated with inode caches. It could make the most workingset gone in order to just offline a page. And the offline is not guaranteed to succeed at all, actually I really doubt the success rate for real life workload.
Furthermore the worse consequence is the system may be locked up and unusable since the page cache release may incur huge amount of works queued for memcg release.
Actually we ran into such unpleasant case in our production environment. Firstly, the workqueue of
memory_failure_work_funcis locked up as below:BUG: workqueue lockup - pool cpus=1 node=0 flags=0x0 nice=0 stuck for 53s!Showing busy workqueues and worker pools:
workqueue events: flags=0x0
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=14/256 refcnt=15
in-flight: 409271:memory_failure_work_func
pending:kfree_rcu_work,kfree_rcu_monitor,kfree_rcu_work,rht_deferred_worker,rht_deferred_worker,rht_deferred_worker,rht_deferred_worker,kfree_rcu_work,kfree_rcu_work,kfree_rcu_work,kfree_rcu_work,drain_local_stock,kfree_rcu_work
workqueuemm_percpu_wq: flags=0x8
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
pending:vmstat_update
workqueuecgroup_destroy: flags=0x0pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=1/1 refcnt=12072 pending: css_release_work_fnThere were over 12K
css_release_work_fnqueued, and this caused a few lockups due to the contention of worker pool lock with IRQ disabled, for example:NMI watchdog: Watchdog detected hard LOCKUP on cpu 1
Modules linked in: amd64_edac_mod edac_mce_amd crct10dif_pclmul crc32_pclmul ghash_clmulni_intel xt_DSCP iptable_mangle kvm_amd bpfilter vfat fat acpi_ipmi i2c_piix4 usb_storage ipmi_si k10temp i2c_core ipmi_devintf ipmi_msghandler acpi_cpufreq sch_fq_codel xfs libcrc32c crc32c_intel mlx5_core mlxfw nvme xhci_pci ptp nvme_core pps_core xhci_hcd CPU: 1 PID: 205500 Comm: kworker/1:0 Tainted: G L 5.10.32-t1.el7.twitter.x86_64 #1 Hardware name: TYAN F5AMT /z /S8026GM2NRE-CGN, BIOS V8.030 03/30/2021 Workqueue: events memory_failure_work_func RIP: 0010:queued_spin_lock_slowpath+0x41/0x1a0 Code: 41 f0 0f ba 2f 08 0f 92 c0 0f b6 c0 c1 e0 08 89 c2 8b 07 30 e4 09 d0 a9 00 01 ff ff 75 1b 85 c0 74 0e 8b 07 84 c0 74 08 f3 90 <8b> 07 84 c0 75 f8 b8 01 00 00 00 66 89 07 c3 f6 c4 01 75 04 c6 47 RSP: 0018:ffff9b2ac278f900 EFLAGS: 00000002 RAX: 0000000000480101 RBX: ffff8ce98ce71800 RCX: 0000000000000084 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8ce98ce6a140 RBP: 00000000000284c8 R08: ffffd7248dcb6808 R09: 0000000000000000 R10: 0000000000000003 R11: ffff9b2ac278f9b0 R12: 0000000000000001 R13: ffff8cb44dab9c00 R14: ffffffffbd1ce6a0 R15: ffff8cacaa37f068 FS: 0000000000000000(0000) GS:ffff8ce98ce40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcf6e8cb000 CR3: 0000000a0c60a000 CR4: 0000000000350ee0 Call Trace: __queue_work+0xd6/0x3c0 queue_work_on+0x1c/0x30 uncharge_batch+0x10e/0x110 mem_cgroup_uncharge_list+0x6d/0x80 release_pages+0x37f/0x3f0 __pagevec_release+0x1c/0x50 __invalidate_mapping_pages+0x348/0x380 ? xfs_alloc_buftarg+0xa4/0x120 [xfs] inode_lru_isolate+0x10a/0x160 ? iput+0x1d0/0x1d0 __list_lru_walk_one+0x7b/0x170 ? iput+0x1d0/0x1d0 list_lru_walk_one+0x4a/0x60 prune_icache_sb+0x37/0x50 super_cache_scan+0x123/0x1a0 do_shrink_slab+0x10c/0x2c0 shrink_slab+0x1f1/0x290 drop_slab_node+0x4d/0x70 soft_offline_page+0x1ac/0x5b0Quoted 8 lines
? dev_mce_log+0xee/0x110 ? notifier_call_chain+0x39/0x90 memory_failure_work_func+0x6a/0x90 process_one_work+0x19e/0x340 ? process_one_work+0x340/0x340 worker_thread+0x30/0x360 ? process_one_work+0x340/0x340 kthread+0x116/0x130Just curious, who actually ends up calling
soft_offline_page()? I cannot really make sense of this, looking at upstream Linux.I can spot
a)
drivers/base/memory.c:/sys/devices/system/memory/soft_offline_pageseems to be a testing interface
Quoted 8 lines
b)
MADV_SOFT_OFFLINEseems to be a testing interface as wellc)
arch/parisc/kernel/pdt.cdoesn't apply to your case I guess?I'm just wondering who ends up calling
soft_offline_page()in a production environment and via which call path. I'm most probably missing something.
... and I missed memory_failure_work_func() with MF_SOFT_OFFLINE :)
Ignore my question :)
Signature · 3 lines
Thanks, David / dhildenb
Quoted 5 lines · Yang Shi
In the current implementation of soft offline, if non-LRU page is met, all the slab caches will be dropped to free the page then offline. But if the page is not slab page all the effort is wasted in vain. Even though it is a slab page, it is not guaranteed the page could be freed at all.
... but there is a chance it could be and the current behavior is actually helpful in some setups.
[...]
Quoted 9 lines
The lockup made the machine is quite unusable. And it also made the most workingset gone, the reclaimabled slab caches were reduced from 12G to 300MB, the page caches were decreased from 17G to 4G.
But the most disappointing thing is all the effort doesn't make the page offline, it just returns:
soft_offline:0x1469f2: unknown non LRU page type5ffff0000000000()
In your example, yes. I had a look at the introducing commit: facb6011f399 ("HWPOISON: Add soft page offline support")
"
When the page is not free or LRU we try to free pages from slab and other caches. The slab freeing is currently quite dumb and does not try to focus on the specific slab cache which might own the page. This could be potentially improved later.
"
I wonder, if instead of removing it altogether, we could actually improve it as envisioned.
To be precise, for alloc_contig_range() it would also make sense to be able to shrink only in a specific physical memory range; this here seems to be a similar thing. (actually, alloc_contig_range(), actual memory offlining and hw poisoning/soft-offlining have a lot in common)
Unfortunately, the last time I took a brief look at teaching shrinkers to be range-aware, it turned out to be a lot of work ... so maybe this is really a long term goal to be mitigated in the meantime by disabling it, if it turns out to be more of a problem than actually help.
Signature · 3 lines
Thanks, David / dhildenb
Quoted 10 lines · David Hildenbrand
Quoted 5 lines · Yang Shi
In the current implementation of soft offline, if non-LRU page is met, all the slab caches will be dropped to free the page then offline. But if the page is not slab page all the effort is wasted in vain. Even though it is a slab page, it is not guaranteed the page could be freed at all.
... but there is a chance it could be and the current behavior is actually helpful in some setups.
I don't disagree it is kind of helpful for some cases, but the question is how likely it is helpful and if the cost is worth it or not. For non-slab page (of course, non-lru too), dropping slab doesn't make any sense. Even though it is slab page, it must be a reclaimable slab. Even though it is a reclaimable slab, dropping slab can't guarantee all objects on the same page are dropped.
IMHO the likelihood is not worth the cost and side effect, for example the unsuable system.
Quoted 32 lines
[...]
Quoted 9 lines
The lockup made the machine is quite unusable. And it also made the most workingset gone, the reclaimabled slab caches were reduced from 12G to 300MB, the page caches were decreased from 17G to 4G.
But the most disappointing thing is all the effort doesn't make the page offline, it just returns:
soft_offline:0x1469f2: unknown non LRU page type5ffff0000000000()In your example, yes. I had a look at the introducing commit:
facb6011f399("HWPOISON: Add soft page offline support")"
When the page is not free or LRU we try to free pages from slab and other caches. The slab freeing is currently quite dumb and does not try to focus on the specific slab cache which might own the page. This could be potentially improved later.
"I wonder, if instead of removing it altogether, we could actually improve it as envisioned.
To be precise, for
alloc_contig_range()it would also make sense to be able to shrink only in a specific physical memory range; this here seems to be a similar thing. (actually,alloc_contig_range(), actual memory offlining and hw poisoning/soft-offlining have a lot in common)
Quoted 4 lines
Unfortunately, the last time I took a brief look at teaching shrinkers to be range-aware, it turned out to be a lot of work ... so maybe this is really a long term goal to be mitigated in the meantime by disabling it, if it turns out to be more of a problem than actually help.
Do you mean physical page range? Yes, it would need a lot of work. TBH, I don't think it is quite feasible for the time being.
The problem is slabs for shrinker are managed by objects rather than pages. For example, dentry and inode objects (the most consumed reclaimable slabs) are linked to lru, and shrinkers traverse the lru to shrink the objects. The objects in a certain range can not be guaranteed in the same range of physical pages.
Quoted 6 lines
--
Thanks,David / dhildenb
Quoted 59 lines · Yang Shi
Quoted 10 lines · David Hildenbrand
Quoted 5 lines · Yang Shi
In the current implementation of soft offline, if non-LRU page is met, all the slab caches will be dropped to free the page then offline. But if the page is not slab page all the effort is wasted in vain. Even though it is a slab page, it is not guaranteed the page could be freed at all.
... but there is a chance it could be and the current behavior is actually helpful in some setups.
I don't disagree it is kind of helpful for some cases, but the question is how likely it is helpful and if the cost is worth it or not. For non-slab page (of course, non-lru too), dropping slab doesn't make any sense. Even though it is slab page, it must be a reclaimable slab. Even though it is a reclaimable slab, dropping slab can't guarantee all objects on the same page are dropped.
IMHO the likelihood is not worth the cost and side effect, for example the unsuable system.
Quoted 32 lines
[...]
Quoted 9 lines
The lockup made the machine is quite unusable. And it also made the most workingset gone, the reclaimabled slab caches were reduced from 12G to 300MB, the page caches were decreased from 17G to 4G.
But the most disappointing thing is all the effort doesn't make the page offline, it just returns:
soft_offline:0x1469f2: unknown non LRU page type5ffff0000000000()In your example, yes. I had a look at the introducing commit:
facb6011f399("HWPOISON: Add soft page offline support")"
When the page is not free or LRU we try to free pages from slab and other caches. The slab freeing is currently quite dumb and does not try to focus on the specific slab cache which might own the page. This could be potentially improved later.
"I wonder, if instead of removing it altogether, we could actually improve it as envisioned.
To be precise, for
alloc_contig_range()it would also make sense to be able to shrink only in a specific physical memory range; this here seems to be a similar thing. (actually,alloc_contig_range(), actual memory offlining and hw poisoning/soft-offlining have a lot in common)Quoted 4 lines
Unfortunately, the last time I took a brief look at teaching shrinkers to be range-aware, it turned out to be a lot of work ... so maybe this is really a long term goal to be mitigated in the meantime by disabling it, if it turns out to be more of a problem than actually help.
Quoted 8 lines
Do you mean physical page range? Yes, it would need a lot of work. TBH, I don't think it is quite feasible for the time being.
The problem is slabs for shrinker are managed by objects rather than pages. For example, dentry and inode objects (the most consumed reclaimable slabs) are linked to lru, and shrinkers traverse the lru to shrink the objects. The objects in a certain range can not be guaranteed in the same range of physical pages.
Right, essentially you would have to look at each individual object and test if it falls into the physical range of interest. Not that it can't be done I guess, but it screams to be a lot of work.
Signature · 3 lines
Thanks, David / dhildenb
Quoted 4 lines · Yang Shi
But the most disappointing thing is all the effort doesn't make the page offline, it just returns:
soft_offline:0x1469f2: unknown non LRU page type5ffff0000000000()
It's a shame it doesn't call dump_page(). There might be more interesting information somewhere in struct page that would help us figure out what kind of page it was in your environment. For example, it might be a page table page or a page allocated for vmalloc(), and in both those cases, there are things we might be able to do (we'd certainly be able to figure out that it isn't worth shrinking slab!)
Quoted 5 lines · Matthew Wilcox
Quoted 3 lines · Yang Shi
But the most disappointing thing is all the effort doesn't make the page offline, it just returns:
Quoted 8 lines
Quoted 1 line
soft_offline:0x1469f2: unknown non LRU page type5ffff0000000000()It's a shame it doesn't call
dump_page(). There might be more interesting information somewhere in struct page that would help us figure out what kind of page it was in your environment. For example, it might be a page table page or a page allocated forvmalloc(), and in both those cases, there are things we might be able to do (we'd certainly be able to figure out that it isn't worth shrinking slab!)
Yes, dump_page() could provide more information to us. I could add a new patch or just update this patch to call dump_page() if offline is failed if the hwpoison maintainer agrees to this as well.
Quoted 15 lines · Yang Shi
Quoted 5 lines · Matthew Wilcox
Quoted 3 lines · Yang Shi
But the most disappointing thing is all the effort doesn't make the page offline, it just returns:
Quoted 8 lines
Quoted 1 line
soft_offline:0x1469f2: unknown non LRU page type5ffff0000000000()It's a shame it doesn't call
dump_page(). There might be more interesting information somewhere in struct page that would help us figure out what kind of page it was in your environment. For example, it might be a page table page or a page allocated forvmalloc(), and in both those cases, there are things we might be able to do (we'd certainly be able to figure out that it isn't worth shrinking slab!)
Quoted 3 lines
Yes,
dump_page()could provide more information to us. I could add a new patch or just update this patch to calldump_page()if offline is failed if the hwpoison maintainer agrees to this as well.
I agree with showing more information in failure case. Thanks for the input.
- Naoya Horiguchi
Quoted 17 lines · HORIGUCHI NAOYA(堀口 直也)
Quoted 15 lines · Yang Shi
Quoted 13 lines · Matthew Wilcox
Quoted 4 lines · Yang Shi
But the most disappointing thing is all the effort doesn't make the page offline, it just returns:
soft_offline:0x1469f2: unknown non LRU page type5ffff0000000000()It's a shame it doesn't call
dump_page(). There might be more interesting information somewhere in struct page that would help us figure out what kind of page it was in your environment. For example, it might be a page table page or a page allocated forvmalloc(), and in both those cases, there are things we might be able to do (we'd certainly be able to figure out that it isn't worth shrinking slab!)
Quoted 5 lines
Quoted 3 lines
Yes,
dump_page()could provide more information to us. I could add a new patch or just update this patch to calldump_page()if offline is failed if the hwpoison maintainer agrees to this as well.I agree with showing more information in failure case. Thanks for the input.
By reading the code, it seems get_any_page() is called to shake the page for both soft offline and memory_failure(), so it seems like a good place to call dump_page() if -EIO is going to be returned, which hwpoison can't handle the page, otherwise we may need call dump_page() in a couple of different places.
Although dump_page() will be called with pcp disabled and holding memory hotplug lock if it is called by get_any_page(), but I'm supposed it should be not a big deal.
Quoted 2 lines
- Naoya Horiguchi
Quoted 92 lines · Yang Shi
In the current implementation of soft offline, if non-LRU page is met, all the slab caches will be dropped to free the page then offline. But if the page is not slab page all the effort is wasted in vain. Even though it is a slab page, it is not guaranteed the page could be freed at all.
However the side effect and cost is quite high. It does not only drop the slab caches, but also may drop a significant amount of page caches which are associated with inode caches. It could make the most workingset gone in order to just offline a page. And the offline is not guaranteed to succeed at all, actually I really doubt the success rate for real life workload.
Furthermore the worse consequence is the system may be locked up and unusable since the page cache release may incur huge amount of works queued for memcg release.
Actually we ran into such unpleasant case in our production environment. Firstly, the workqueue of
memory_failure_work_funcis locked up as below:BUG: workqueue lockup - pool cpus=1 node=0 flags=0x0 nice=0 stuck for 53s!Showing busy workqueues and worker pools:
workqueue events: flags=0x0
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=14/256 refcnt=15
in-flight: 409271:memory_failure_work_func
pending:kfree_rcu_work,kfree_rcu_monitor,kfree_rcu_work,rht_deferred_worker,rht_deferred_worker,rht_deferred_worker,rht_deferred_worker,kfree_rcu_work,kfree_rcu_work,kfree_rcu_work,kfree_rcu_work,drain_local_stock,kfree_rcu_workworkqueuemm_percpu_wq: flags=0x8
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
pending:vmstat_update
workqueuecgroup_destroy: flags=0x0
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=1/1 refcnt=12072
pending:css_release_work_fnThere were over 12K
css_release_work_fnqueued, and this caused a few lockups due to the contention of worker pool lock with IRQ disabled, for example:NMI watchdog: Watchdog detected hard LOCKUP on cpu 1
Modules linked in: amd64_edac_mod edac_mce_amd crct10dif_pclmul crc32_pclmul ghash_clmulni_intel xt_DSCP iptable_mangle kvm_amd bpfilter vfat fat acpi_ipmi i2c_piix4 usb_storage ipmi_si k10temp i2c_core ipmi_devintf ipmi_msghandler acpi_cpufreq sch_fq_codel xfs libcrc32c crc32c_intel mlx5_core mlxfw nvme xhci_pci ptp nvme_core pps_core xhci_hcd CPU: 1 PID: 205500 Comm: kworker/1:0 Tainted: G L 5.10.32-t1.el7.twitter.x86_64 #1 Hardware name: TYAN F5AMT /z /S8026GM2NRE-CGN, BIOS V8.030 03/30/2021 Workqueue: events memory_failure_work_func RIP: 0010:queued_spin_lock_slowpath+0x41/0x1a0 Code: 41 f0 0f ba 2f 08 0f 92 c0 0f b6 c0 c1 e0 08 89 c2 8b 07 30 e4 09 d0 a9 00 01 ff ff 75 1b 85 c0 74 0e 8b 07 84 c0 74 08 f3 90 <8b> 07 84 c0 75 f8 b8 01 00 00 00 66 89 07 c3 f6 c4 01 75 04 c6 47 RSP: 0018:ffff9b2ac278f900 EFLAGS: 00000002 RAX: 0000000000480101 RBX: ffff8ce98ce71800 RCX: 0000000000000084 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8ce98ce6a140 RBP: 00000000000284c8 R08: ffffd7248dcb6808 R09: 0000000000000000 R10: 0000000000000003 R11: ffff9b2ac278f9b0 R12: 0000000000000001 R13: ffff8cb44dab9c00 R14: ffffffffbd1ce6a0 R15: ffff8cacaa37f068 FS: 0000000000000000(0000) GS:ffff8ce98ce40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcf6e8cb000 CR3: 0000000a0c60a000 CR4: 0000000000350ee0 Call Trace: __queue_work+0xd6/0x3c0 queue_work_on+0x1c/0x30 uncharge_batch+0x10e/0x110 mem_cgroup_uncharge_list+0x6d/0x80 release_pages+0x37f/0x3f0 __pagevec_release+0x1c/0x50 __invalidate_mapping_pages+0x348/0x380 ? xfs_alloc_buftarg+0xa4/0x120 [xfs] inode_lru_isolate+0x10a/0x160 ? iput+0x1d0/0x1d0 __list_lru_walk_one+0x7b/0x170 ? iput+0x1d0/0x1d0 list_lru_walk_one+0x4a/0x60 prune_icache_sb+0x37/0x50 super_cache_scan+0x123/0x1a0 do_shrink_slab+0x10c/0x2c0 shrink_slab+0x1f1/0x290 drop_slab_node+0x4d/0x70 soft_offline_page+0x1ac/0x5b0 ? dev_mce_log+0xee/0x110 ? notifier_call_chain+0x39/0x90 memory_failure_work_func+0x6a/0x90 process_one_work+0x19e/0x340 ? process_one_work+0x340/0x340 worker_thread+0x30/0x360 ? process_one_work+0x340/0x340 kthread+0x116/0x130The lockup made the machine is quite unusable. And it also made the most workingset gone, the reclaimabled slab caches were reduced from 12G to 300MB, the page caches were decreased from 17G to 4G.
But the most disappointing thing is all the effort doesn't make the page offline, it just returns:
soft_offline:0x1469f2: unknown non LRU page type5ffff0000000000()
Quoted 8 lines
It seems the aggressive behavior for non-LRU page didn't pay back, so it doesn't make too much sense to keep it considering the terrible side effect.
Reported-by David Mackey <[email protected]>Cc Naoya Horiguchi <[email protected]>Cc Oscar Salvador <[email protected]>Signed-off-by Yang Shi <[email protected]>
Thank you. I agree with the idea of dropping drop_slab_node() in shake_page(), hoping that range-based slab shrinker will be implemented in the future.
This patch conflicts with the patch
https://lore.kernel.org/linux-mm/[email protected]/T/#u
which adds another shake_page(), so could you add the following hunk in your patch?
mm/memory-failure.c +1 -1
@@ -1198,7 +1198,7 @@ static int get_any_page(struct page *p, unsigned long flags)* page, retry. */ if (pass++ <3 ) { -shake_page (p,1 ); +shake_page (p); goto try_again; } goto out;
Thanks,
Naoya Horiguchi
Quoted 124 lines · Naoya Horiguchi
Quoted 92 lines · Yang Shi
In the current implementation of soft offline, if non-LRU page is met, all the slab caches will be dropped to free the page then offline. But if the page is not slab page all the effort is wasted in vain. Even though it is a slab page, it is not guaranteed the page could be freed at all.
However the side effect and cost is quite high. It does not only drop the slab caches, but also may drop a significant amount of page caches which are associated with inode caches. It could make the most workingset gone in order to just offline a page. And the offline is not guaranteed to succeed at all, actually I really doubt the success rate for real life workload.
Furthermore the worse consequence is the system may be locked up and unusable since the page cache release may incur huge amount of works queued for memcg release.
Actually we ran into such unpleasant case in our production environment. Firstly, the workqueue of
memory_failure_work_funcis locked up as below:BUG: workqueue lockup - pool cpus=1 node=0 flags=0x0 nice=0 stuck for 53s!Showing busy workqueues and worker pools:
workqueue events: flags=0x0
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=14/256 refcnt=15
in-flight: 409271:memory_failure_work_func
pending:kfree_rcu_work,kfree_rcu_monitor,kfree_rcu_work,rht_deferred_worker,rht_deferred_worker,rht_deferred_worker,rht_deferred_worker,kfree_rcu_work,kfree_rcu_work,kfree_rcu_work,kfree_rcu_work,drain_local_stock,kfree_rcu_work
workqueuemm_percpu_wq: flags=0x8
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
pending:vmstat_update
workqueuecgroup_destroy: flags=0x0
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=1/1 refcnt=12072
pending:css_release_work_fnThere were over 12K
css_release_work_fnqueued, and this caused a few lockups due to the contention of worker pool lock with IRQ disabled, for example:NMI watchdog: Watchdog detected hard LOCKUP on cpu 1
Modules linked in: amd64_edac_mod edac_mce_amd crct10dif_pclmul crc32_pclmul ghash_clmulni_intel xt_DSCP iptable_mangle kvm_amd bpfilter vfat fat acpi_ipmi i2c_piix4 usb_storage ipmi_si k10temp i2c_core ipmi_devintf ipmi_msghandler acpi_cpufreq sch_fq_codel xfs libcrc32c crc32c_intel mlx5_core mlxfw nvme xhci_pci ptp nvme_core pps_core xhci_hcd CPU: 1 PID: 205500 Comm: kworker/1:0 Tainted: G L 5.10.32-t1.el7.twitter.x86_64 #1 Hardware name: TYAN F5AMT /z /S8026GM2NRE-CGN, BIOS V8.030 03/30/2021 Workqueue: events memory_failure_work_func RIP: 0010:queued_spin_lock_slowpath+0x41/0x1a0 Code: 41 f0 0f ba 2f 08 0f 92 c0 0f b6 c0 c1 e0 08 89 c2 8b 07 30 e4 09 d0 a9 00 01 ff ff 75 1b 85 c0 74 0e 8b 07 84 c0 74 08 f3 90 <8b> 07 84 c0 75 f8 b8 01 00 00 00 66 89 07 c3 f6 c4 01 75 04 c6 47 RSP: 0018:ffff9b2ac278f900 EFLAGS: 00000002 RAX: 0000000000480101 RBX: ffff8ce98ce71800 RCX: 0000000000000084 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8ce98ce6a140 RBP: 00000000000284c8 R08: ffffd7248dcb6808 R09: 0000000000000000 R10: 0000000000000003 R11: ffff9b2ac278f9b0 R12: 0000000000000001 R13: ffff8cb44dab9c00 R14: ffffffffbd1ce6a0 R15: ffff8cacaa37f068 FS: 0000000000000000(0000) GS:ffff8ce98ce40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcf6e8cb000 CR3: 0000000a0c60a000 CR4: 0000000000350ee0 Call Trace: __queue_work+0xd6/0x3c0 queue_work_on+0x1c/0x30 uncharge_batch+0x10e/0x110 mem_cgroup_uncharge_list+0x6d/0x80 release_pages+0x37f/0x3f0 __pagevec_release+0x1c/0x50 __invalidate_mapping_pages+0x348/0x380 ? xfs_alloc_buftarg+0xa4/0x120 [xfs] inode_lru_isolate+0x10a/0x160 ? iput+0x1d0/0x1d0 __list_lru_walk_one+0x7b/0x170 ? iput+0x1d0/0x1d0 list_lru_walk_one+0x4a/0x60 prune_icache_sb+0x37/0x50 super_cache_scan+0x123/0x1a0 do_shrink_slab+0x10c/0x2c0 shrink_slab+0x1f1/0x290 drop_slab_node+0x4d/0x70 soft_offline_page+0x1ac/0x5b0 ? dev_mce_log+0xee/0x110 ? notifier_call_chain+0x39/0x90 memory_failure_work_func+0x6a/0x90 process_one_work+0x19e/0x340 ? process_one_work+0x340/0x340 worker_thread+0x30/0x360 ? process_one_work+0x340/0x340 kthread+0x116/0x130The lockup made the machine is quite unusable. And it also made the most workingset gone, the reclaimabled slab caches were reduced from 12G to 300MB, the page caches were decreased from 17G to 4G.
But the most disappointing thing is all the effort doesn't make the page offline, it just returns:
soft_offline:0x1469f2: unknown non LRU page type5ffff0000000000()Quoted 8 lines
It seems the aggressive behavior for non-LRU page didn't pay back, so it doesn't make too much sense to keep it considering the terrible side effect.
Reported-by David Mackey <[email protected]>Cc Naoya Horiguchi <[email protected]>Cc Oscar Salvador <[email protected]>Signed-off-by Yang Shi <[email protected]>Thank you. I agree with the idea of dropping
drop_slab_node()inshake_page(), hoping that range-based slab shrinker will be implemented in the future.This patch conflicts with the patch
https://lore.kernel.org/linux-mm/[email protected]/T/#u
which adds anothershake_page(), so could you add the following hunk in your patch?mm/memory-failure.c +1
-1@@ -1198,7 +1198,7 @@ static int get_any_page(struct page *p, unsigned long flags)* page, retry. */ if (pass++ <3 ) { -shake_page (p,1 ); +shake_page (p); goto try_again; } goto out;
Quoted 3 lines
Thanks,
Naoya Horiguchi
Might we want to add a TODO in the code? We have a similar one in mm/page_isolation.c:set_migratetype_isolate() and it's certainly a reminder that something of value is missing.
Signature · 3 lines
Thanks, David / dhildenb
On Wed, Aug 18, 2021 at 09:24:01AM +0200, David Hildenbrand wrote:
...
Quoted 4 lines
Might we want to add a TODO in the code? We have a similar one in mm/page_isolation.c:set_migratetype_isolate() and it's certainly a reminder that something of value is missing.
Yes, that will be helpful. The below's what's in my mind, but if someone has better idea, that's fine.
@@ -296,11 +296,9 @@ void shake_page(struct page *p, int access)
}
/*
- * Only call shrink_node_slabs here (which would also shrink
- * other caches) if access is not potentially fatal.
+ * TODO: Could shrink slab caches here if a lightweight range-based
+ * shrinker will be available.
*/
- if (access)
- drop_slab_node(page_to_nid(p));
}
EXPORT_SYMBOL_GPL(shake_page);
- Naoya Horiguchi
Quoted 13 lines · HORIGUCHI NAOYA(堀口 直也)
On Wed, Aug 18, 2021 at 09:24:01AM +0200, David Hildenbrand wrote:
...Quoted 4 lines
Might we want to add a TODO in the code? We have a similar one in mm/page_isolation.c:set_migratetype_isolate() and it's certainly a reminder that something of value is missing.
Yes, that will be helpful. The below's what's in my mind, but if someone has better idea, that's fine.
(quoted diff) +0
-0@@ -296,11 +296,9 @@ void shake_page(struct page *p, int access) }
Review void shake_page(struct page *p, int access) · line 303
Quoted 10 lines
(quoted diff) +2
-4/* - * Only call shrink_node_slabs here (which would also shrink - * other caches) if access is not potentially fatal. + * TODO: Could shrink slab caches here if a lightweight range-based + * shrinker will be available. */ - if (access) - drop_slab_node(page_to_nid(p)); } EXPORT_SYMBOL_GPL(shake_page);
Just what I had in mind, thanks!
Signature · 3 lines
Thanks, David / dhildenb
Quoted 15 lines · David Hildenbrand
Quoted 13 lines · HORIGUCHI NAOYA(堀口 直也)
On Wed, Aug 18, 2021 at 09:24:01AM +0200, David Hildenbrand wrote:
...Quoted 4 lines
Might we want to add a TODO in the code? We have a similar one in mm/page_isolation.c:set_migratetype_isolate() and it's certainly a reminder that something of value is missing.
Yes, that will be helpful. The below's what's in my mind, but if someone has better idea, that's fine.
(quoted diff) +0
-0@@ -296,11 +296,9 @@ void shake_page(struct page *p, int access) }
Quoted 12 lines
Review void shake_page(struct page *p, int access) · line 303
Quoted 10 lines
(quoted diff) +2
-4/* - * Only call shrink_node_slabs here (which would also shrink - * other caches) if access is not potentially fatal. + * TODO: Could shrink slab caches here if a lightweight range-based + * shrinker will be available. */ - if (access) - drop_slab_node(page_to_nid(p)); } EXPORT_SYMBOL_GPL(shake_page);Just what I had in mind, thanks!
Fine to me, will add this in v2.
Quoted 8 lines
--
Thanks,David / dhildenb
Quoted 98 lines · Naoya Horiguchi
Quoted 96 lines · Yang Shi
In the current implementation of soft offline, if non-LRU page is met, all the slab caches will be dropped to free the page then offline. But if the page is not slab page all the effort is wasted in vain. Even though it is a slab page, it is not guaranteed the page could be freed at all.
However the side effect and cost is quite high. It does not only drop the slab caches, but also may drop a significant amount of page caches which are associated with inode caches. It could make the most workingset gone in order to just offline a page. And the offline is not guaranteed to succeed at all, actually I really doubt the success rate for real life workload.
Furthermore the worse consequence is the system may be locked up and unusable since the page cache release may incur huge amount of works queued for memcg release.
Actually we ran into such unpleasant case in our production environment. Firstly, the workqueue of
memory_failure_work_funcis locked up as below:BUG: workqueue lockup - pool cpus=1 node=0 flags=0x0 nice=0 stuck for 53s!Showing busy workqueues and worker pools:
workqueue events: flags=0x0
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=14/256 refcnt=15
in-flight: 409271:memory_failure_work_func
pending:kfree_rcu_work,kfree_rcu_monitor,kfree_rcu_work,rht_deferred_worker,rht_deferred_worker,rht_deferred_worker,rht_deferred_worker,kfree_rcu_work,kfree_rcu_work,kfree_rcu_work,kfree_rcu_work,drain_local_stock,kfree_rcu_work
workqueuemm_percpu_wq: flags=0x8
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
pending:vmstat_update
workqueuecgroup_destroy: flags=0x0
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=1/1 refcnt=12072
pending:css_release_work_fnThere were over 12K
css_release_work_fnqueued, and this caused a few lockups due to the contention of worker pool lock with IRQ disabled, for example:NMI watchdog: Watchdog detected hard LOCKUP on cpu 1
Modules linked in: amd64_edac_mod edac_mce_amd crct10dif_pclmul crc32_pclmul ghash_clmulni_intel xt_DSCP iptable_mangle kvm_amd bpfilter vfat fat acpi_ipmi i2c_piix4 usb_storage ipmi_si k10temp i2c_core ipmi_devintf ipmi_msghandler acpi_cpufreq sch_fq_codel xfs libcrc32c crc32c_intel mlx5_core mlxfw nvme xhci_pci ptp nvme_core pps_core xhci_hcd CPU: 1 PID: 205500 Comm: kworker/1:0 Tainted: G L 5.10.32-t1.el7.twitter.x86_64 #1 Hardware name: TYAN F5AMT /z /S8026GM2NRE-CGN, BIOS V8.030 03/30/2021 Workqueue: events memory_failure_work_func RIP: 0010:queued_spin_lock_slowpath+0x41/0x1a0 Code: 41 f0 0f ba 2f 08 0f 92 c0 0f b6 c0 c1 e0 08 89 c2 8b 07 30 e4 09 d0 a9 00 01 ff ff 75 1b 85 c0 74 0e 8b 07 84 c0 74 08 f3 90 <8b> 07 84 c0 75 f8 b8 01 00 00 00 66 89 07 c3 f6 c4 01 75 04 c6 47 RSP: 0018:ffff9b2ac278f900 EFLAGS: 00000002 RAX: 0000000000480101 RBX: ffff8ce98ce71800 RCX: 0000000000000084 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8ce98ce6a140 RBP: 00000000000284c8 R08: ffffd7248dcb6808 R09: 0000000000000000 R10: 0000000000000003 R11: ffff9b2ac278f9b0 R12: 0000000000000001 R13: ffff8cb44dab9c00 R14: ffffffffbd1ce6a0 R15: ffff8cacaa37f068 FS: 0000000000000000(0000) GS:ffff8ce98ce40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcf6e8cb000 CR3: 0000000a0c60a000 CR4: 0000000000350ee0 Call Trace: __queue_work+0xd6/0x3c0 queue_work_on+0x1c/0x30 uncharge_batch+0x10e/0x110 mem_cgroup_uncharge_list+0x6d/0x80 release_pages+0x37f/0x3f0 __pagevec_release+0x1c/0x50 __invalidate_mapping_pages+0x348/0x380 ? xfs_alloc_buftarg+0xa4/0x120 [xfs] inode_lru_isolate+0x10a/0x160 ? iput+0x1d0/0x1d0 __list_lru_walk_one+0x7b/0x170 ? iput+0x1d0/0x1d0 list_lru_walk_one+0x4a/0x60 prune_icache_sb+0x37/0x50 super_cache_scan+0x123/0x1a0 do_shrink_slab+0x10c/0x2c0 shrink_slab+0x1f1/0x290 drop_slab_node+0x4d/0x70 soft_offline_page+0x1ac/0x5b0 ? dev_mce_log+0xee/0x110 ? notifier_call_chain+0x39/0x90 memory_failure_work_func+0x6a/0x90 process_one_work+0x19e/0x340 ? process_one_work+0x340/0x340 worker_thread+0x30/0x360 ? process_one_work+0x340/0x340 kthread+0x116/0x130The lockup made the machine is quite unusable. And it also made the most workingset gone, the reclaimabled slab caches were reduced from 12G to 300MB, the page caches were decreased from 17G to 4G.
But the most disappointing thing is all the effort doesn't make the page offline, it just returns:
soft_offline:0x1469f2: unknown non LRU page type5ffff0000000000()It seems the aggressive behavior for non-LRU page didn't pay back, so it doesn't make too much sense to keep it considering the terrible side effect.
Quoted 7 lines
Quoted 4 lines
Reported-by David Mackey <[email protected]>Cc Naoya Horiguchi <[email protected]>Cc Oscar Salvador <[email protected]>Signed-off-by Yang Shi <[email protected]>Thank you. I agree with the idea of dropping
drop_slab_node()inshake_page(), hoping that range-based slab shrinker will be implemented in the future.
Thank you.
Quoted 4 lines
This patch conflicts with the patch
https://lore.kernel.org/linux-mm/[email protected]/T/#u
which adds anothershake_page(), so could you add the following hunk in your patch?
Sure, I will rebase the patches on top of it.
Quoted 18 lines
mm/memory-failure.c +1
-1@@ -1198,7 +1198,7 @@ static int get_any_page(struct page *p, unsigned long flags)* page, retry. */ if (pass++ <3 ) { -shake_page (p,1 ); +shake_page (p); goto try_again; } goto out;Thanks,
Naoya Horiguchi
Quoted 115 lines · Naoya Horiguchi
Quoted 92 lines · Yang Shi
In the current implementation of soft offline, if non-LRU page is met, all the slab caches will be dropped to free the page then offline. But if the page is not slab page all the effort is wasted in vain. Even though it is a slab page, it is not guaranteed the page could be freed at all.
However the side effect and cost is quite high. It does not only drop the slab caches, but also may drop a significant amount of page caches which are associated with inode caches. It could make the most workingset gone in order to just offline a page. And the offline is not guaranteed to succeed at all, actually I really doubt the success rate for real life workload.
Furthermore the worse consequence is the system may be locked up and unusable since the page cache release may incur huge amount of works queued for memcg release.
Actually we ran into such unpleasant case in our production environment. Firstly, the workqueue of
memory_failure_work_funcis locked up as below:BUG: workqueue lockup - pool cpus=1 node=0 flags=0x0 nice=0 stuck for 53s!Showing busy workqueues and worker pools:
workqueue events: flags=0x0
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=14/256 refcnt=15
in-flight: 409271:memory_failure_work_func
pending:kfree_rcu_work,kfree_rcu_monitor,kfree_rcu_work,rht_deferred_worker,rht_deferred_worker,rht_deferred_worker,rht_deferred_worker,kfree_rcu_work,kfree_rcu_work,kfree_rcu_work,kfree_rcu_work,drain_local_stock,kfree_rcu_work
workqueuemm_percpu_wq: flags=0x8
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
pending:vmstat_update
workqueuecgroup_destroy: flags=0x0
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=1/1 refcnt=12072
pending:css_release_work_fnThere were over 12K
css_release_work_fnqueued, and this caused a few lockups due to the contention of worker pool lock with IRQ disabled, for example:NMI watchdog: Watchdog detected hard LOCKUP on cpu 1
Modules linked in: amd64_edac_mod edac_mce_amd crct10dif_pclmul crc32_pclmul ghash_clmulni_intel xt_DSCP iptable_mangle kvm_amd bpfilter vfat fat acpi_ipmi i2c_piix4 usb_storage ipmi_si k10temp i2c_core ipmi_devintf ipmi_msghandler acpi_cpufreq sch_fq_codel xfs libcrc32c crc32c_intel mlx5_core mlxfw nvme xhci_pci ptp nvme_core pps_core xhci_hcd CPU: 1 PID: 205500 Comm: kworker/1:0 Tainted: G L 5.10.32-t1.el7.twitter.x86_64 #1 Hardware name: TYAN F5AMT /z /S8026GM2NRE-CGN, BIOS V8.030 03/30/2021 Workqueue: events memory_failure_work_func RIP: 0010:queued_spin_lock_slowpath+0x41/0x1a0 Code: 41 f0 0f ba 2f 08 0f 92 c0 0f b6 c0 c1 e0 08 89 c2 8b 07 30 e4 09 d0 a9 00 01 ff ff 75 1b 85 c0 74 0e 8b 07 84 c0 74 08 f3 90 <8b> 07 84 c0 75 f8 b8 01 00 00 00 66 89 07 c3 f6 c4 01 75 04 c6 47 RSP: 0018:ffff9b2ac278f900 EFLAGS: 00000002 RAX: 0000000000480101 RBX: ffff8ce98ce71800 RCX: 0000000000000084 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8ce98ce6a140 RBP: 00000000000284c8 R08: ffffd7248dcb6808 R09: 0000000000000000 R10: 0000000000000003 R11: ffff9b2ac278f9b0 R12: 0000000000000001 R13: ffff8cb44dab9c00 R14: ffffffffbd1ce6a0 R15: ffff8cacaa37f068 FS: 0000000000000000(0000) GS:ffff8ce98ce40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcf6e8cb000 CR3: 0000000a0c60a000 CR4: 0000000000350ee0 Call Trace: __queue_work+0xd6/0x3c0 queue_work_on+0x1c/0x30 uncharge_batch+0x10e/0x110 mem_cgroup_uncharge_list+0x6d/0x80 release_pages+0x37f/0x3f0 __pagevec_release+0x1c/0x50 __invalidate_mapping_pages+0x348/0x380 ? xfs_alloc_buftarg+0xa4/0x120 [xfs] inode_lru_isolate+0x10a/0x160 ? iput+0x1d0/0x1d0 __list_lru_walk_one+0x7b/0x170 ? iput+0x1d0/0x1d0 list_lru_walk_one+0x4a/0x60 prune_icache_sb+0x37/0x50 super_cache_scan+0x123/0x1a0 do_shrink_slab+0x10c/0x2c0 shrink_slab+0x1f1/0x290 drop_slab_node+0x4d/0x70 soft_offline_page+0x1ac/0x5b0 ? dev_mce_log+0xee/0x110 ? notifier_call_chain+0x39/0x90 memory_failure_work_func+0x6a/0x90 process_one_work+0x19e/0x340 ? process_one_work+0x340/0x340 worker_thread+0x30/0x360 ? process_one_work+0x340/0x340 kthread+0x116/0x130The lockup made the machine is quite unusable. And it also made the most workingset gone, the reclaimabled slab caches were reduced from 12G to 300MB, the page caches were decreased from 17G to 4G.
But the most disappointing thing is all the effort doesn't make the page offline, it just returns:
soft_offline:0x1469f2: unknown non LRU page type5ffff0000000000()Quoted 8 lines
It seems the aggressive behavior for non-LRU page didn't pay back, so it doesn't make too much sense to keep it considering the terrible side effect.
Reported-by David Mackey <[email protected]>Cc Naoya Horiguchi <[email protected]>Cc Oscar Salvador <[email protected]>Signed-off-by Yang Shi <[email protected]>Thank you. I agree with the idea of dropping
drop_slab_node()inshake_page(), hoping that range-based slab shrinker will be implemented in the future.This patch conflicts with the patch
https://lore.kernel.org/linux-mm/[email protected]/T/#u
which adds anothershake_page(), so could you add the following hunk in your patch?mm/memory-failure.c +0
-0
mm/memory-failure.c static int get_any_page(struct page *p, unsigned long flags) · line 1204
Quoted 8 lines
mm/memory-failure.c +1
-1@@ -1198,7 +1198,7 @@ static int get_any_page(struct page *p, unsigned long flags)* page, retry. */ if (pass++ <3 ) { -shake_page (p,1 ); +shake_page (p); goto try_again; } goto out;
BTW, a question about the return value with the above patch, will reply in that thread.
Quoted 4 lines
Thanks,
Naoya Horiguchi