Add ubiscan utility
PATCH 1/1 Add ubiscan utility
ubiscan will scan the PEBs in a specific MTD device and print a summary of the PEB erase counters and (optionally) details about each PEB's status.
Example output:
# ./ubiscan /dev/mtd6 Summary ========================================================= mtd : 6 type : nand size : 110362624 bytes (105.2 MiB) PEBs : 842 min I/O: 2048 bytes
PEB erase counters
=========================================================
valid : 834
empty : 0
corrupted: 0
alien : 0
bad : 8
Histogram
=========================================================
from to count min avg max
---------------------------------------------------------
0 .. 9: 55 1 4 9 10 .. 99: 174 10 48 99 100 .. 999: 514 103 287 987 1000 .. 9999: 91 1004 1880 2251 10000 .. 99999: 0 0 0 0 100000 .. inf: 0 0 0 0
---------------------------------------------------------
Total : 834 1 392 2251
If the --verbose switch is given, ubiscan will print PEB details:
# ./ubiscan --verbose /dev/mtd6
[... same output as before ...]
Details
=========================================================
PEB 0: 253
PEB 1: 1489
PEB 2: 1
PEB 3: 1
PEB 4: 1
PEB 5: 1
PEB 6: 1
PEB 7: 1
PEB 8: 1
PEB 9: 1
PEB 10: 1
...
PEB 832: 1225
PEB 833: 252
PEB 834: 111
PEB 835: 298
PEB 836: 1264
PEB 837: 11
PEB 838: EB_BAD
PEB 839: EB_BAD
PEB 840: EB_BAD
PEB 841: EB_BAD
--- ubi-utils/Makemodule.am | 5 +- ubi-utils/ubiscan.c | 318 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 322 insertions(+), 1 deletion(-) create mode 100644 ubi-utils/ubiscan.c
ubi-utils/Makemodule.am +4 -1
@@ -25,6 +25,9 @@ ubinize_LDADD = libubi.a libubigen.a libmtd.a libiniparser.a ubiformat_SOURCES = ubi-utils/ubiformat.c include/mtd_swab.h ubiformat_LDADD = libubi.a libubigen.a libmtd.a libscan.a +ubiscan_SOURCES = ubi-utils/ubiscan.c include/mtd_swab.h +ubiscan_LDADD = libubi.a libubigen.a libscan.a libmtd.a + ubirename_SOURCES = ubi-utils/ubirename.c ubirename_LDADD = libmtd.a libubi.a
@@ -44,7 +47,7 @@ endif sbin_PROGRAMS += \ ubiupdatevol ubimkvol ubirmvol ubicrc32 ubinfo ubiattach \ - ubidetach ubinize ubiformat ubirename mtdinfo ubirsvol ubiblock + ubidetach ubinize ubiformat ubirename mtdinfo ubirsvol ubiblock ubiscan if WITH_GETRANDOM sbin_PROGRAMS += ubihealthd
ubi-utils/ubiscan.c new file +318 -0
318 lines not on this page · raw message
Signature · 6 lines
2.17.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
David Oberhollenzer
AppliedHi,
this does sound like a useful utility to me. Sorry to leave you hanging there, I was also hoping to maybe get some other feedback as well before applying it.
Applied to mtd-utils.git master.
Thanks,
David
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/