Skip to contentSkip to conversation

qla2xxx: Fixes for SCSI EH rework

PATCH Applied Hannes Reinecke 3 participants 9 messages Aug 19, 2021 – Aug 28, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover qla2xxx: Fixes for SCSI EH rework

Hi all,

with the SCSI EH rework the scsi_cmnd argument for the SCSI EH callbacks is going away, so we need to fixup the drivers to work without it.

This patchset modifies the qla2xxx driver to not rely on a specific command for the SCSI EH callbacks.

As usual, comments and reviews are welcome.

Hannes Reinecke (3):
qla2xxx: Do not call fc_block_scsi_eh() during bus reset
qla2xxx: Open-code qla2xxx_eh_target_reset()
qla2xxx: Open-code qla2xxx_eh_device_reset()

 drivers/scsi/qla2xxx/qla_os.c | 116 ++++++++++++++++++++++------------
 1 file changed, 74 insertions(+), 42 deletions(-)
Signature · 1 line
2.29.2
#1 lore raw

PATCH 1/3 qla2xxx: Do not call fc_block_scsi_eh() during bus reset

When calling bus reset the driver will be doing a full SAN resync anyway, so there is no need to wait for any pending RSCNs; they'll be re-issued during resync anyway.

---
 drivers/scsi/qla2xxx/qla_os.c | 10 ----------
 1 file changed, 10 deletions(-)
drivers/scsi/qla2xxx/qla_os.c +0 -10
index 868037c7d608..54254bd3a7d7 100644
@@ -1499,7 +1499,6 @@ static int
 qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
-	fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 	int ret = FAILED;
 	unsigned int id;
 	uint64_t lun;
@@ -1515,15 +1514,6 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
 	id = cmd->device->id;
 	lun = cmd->device->lun;
 
-	if (!fcport) {
-		return ret;
-	}
-
-	ret = fc_block_scsi_eh(cmd);
-	if (ret != 0)
-		return ret;
-	ret = FAILED;
-
 	if (qla2x00_chip_is_down(vha))
 		return ret;
 
Signature · 1 line
2.29.2
maintainer Reviewed-by on v1 1/3
#2 lore raw

RE: [EXT] [PATCH 1/3] qla2xxx: Do not call fc_block_scsi_eh() during bus reset

Hannes,

Quoted 53 lines

-----Original Message-----
From: Hannes Reinecke <[email protected]>
Sent: Thursday, August 19, 2021 2:49 PM
To: Martin K. Petersen <[email protected]>
Cc: Christoph Hellwig <[email protected]>; James Bottomley <[email protected]>; Nilesh Javali <[email protected]>; [email protected]; Hannes Reinecke <[email protected]>
Subject: [EXT] [PATCH 1/3] qla2xxx: Do not call fc_block_scsi_eh() during bus reset

External Email

----------------------------------------------------------------------
When calling bus reset the driver will be doing a full SAN resync anyway, so there is no need to wait for any pending RSCNs; they'll be re-issued during resync anyway.

---
 drivers/scsi/qla2xxx/qla_os.c | 10 ----------
 1 file changed, 10 deletions(-)
drivers/scsi/qla2xxx/qla_os.c +0 -11
index 868037c7d608..54254bd3a7d7 100644
@@ -1499,7 +1499,6 @@ static int
 qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
-	fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 	int ret = FAILED;
 	unsigned int id;
 	uint64_t lun;
@@ -1515,15 +1514,6 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
 	id = cmd->device->id;
 	lun = cmd->device->lun;
 
-	if (!fcport) {
-		return ret;
-	}
-
-	ret = fc_block_scsi_eh(cmd);
-	if (ret != 0)
-		return ret;
-	ret = FAILED;
-
 	if (qla2x00_chip_is_down(vha))
 		return ret;
 
--
Quoted 1 line

2.29.2

Thanks for the patches.

#3 lore raw

Re: [PATCH 1/3] qla2xxx: Do not call fc_block_scsi_eh() during bus reset

In reply to Hannes Reinecke

Hannes,

Quoted 3 lines

When calling bus reset the driver will be doing a full SAN resync anyway, so there is no need to wait for any pending RSCNs; they'll be re-issued during resync anyway.

Applied to 5.15/scsi-staging, thanks!

Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering
#4 lore raw

PATCH 2/3 qla2xxx: Open-code qla2xxx_eh_target_reset()

In reply to Hannes Reinecke

Device reset and target reset will be using different calling sequences, so open-code __qla2xxx_eh_generic_reset() in qla2xxx_eh_target_reset(). No functional changes.

---
 drivers/scsi/qla2xxx/qla_os.c | 56 +++++++++++++++++++++++++++++++++--
 1 file changed, 53 insertions(+), 3 deletions(-)
drivers/scsi/qla2xxx/qla_os.c +53 -3
index 54254bd3a7d7..7786af46224a 100644
@@ -1466,8 +1466,12 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
 static int
 qla2xxx_eh_target_reset(struct scsi_cmnd *cmd)
 {
-	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
+	struct scsi_device *sdev = cmd->device;
+	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
+	scsi_qla_host_t *vha = shost_priv(rport_to_shost(rport));
 	struct qla_hw_data *ha = vha->hw;
+	fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
+	int err;
 
 	if (qla2x00_isp_reg_stat(ha)) {
 		ql_log(ql_log_info, vha, 0x803f,
@@ -1476,8 +1480,54 @@ qla2xxx_eh_target_reset(struct scsi_cmnd *cmd)
 		return FAILED;
 	}
 
-	return __qla2xxx_eh_generic_reset("TARGET", WAIT_TARGET, cmd,
-	    ha->isp_ops->target_reset);
+	if (!fcport) {
+		return FAILED;
+	}
+
+	err = fc_block_rport(rport);
+	if (err != 0)
+		return err;
+
+	if (fcport->deleted)
+		return SUCCESS;
+
+	ql_log(ql_log_info, vha, 0x8009,
+	    "TARGET RESET ISSUED nexus=%ld:%d cmd=%p.\n", vha->host_no,
+	    sdev->id, cmd);
+
+	err = 0;
+	if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
+		ql_log(ql_log_warn, vha, 0x800a,
+		    "Wait for hba online failed for cmd=%p.\n", cmd);
+		goto eh_reset_failed;
+	}
+	err = 2;
+	if (ha->isp_ops->target_reset(fcport, 0, 0) != QLA_SUCCESS) {
+		ql_log(ql_log_warn, vha, 0x800c,
+		    "target_reset failed for cmd=%p.\n", cmd);
+		goto eh_reset_failed;
+	}
+	err = 3;
+	if (qla2x00_eh_wait_for_pending_commands(vha, sdev->id,
+	    0, WAIT_TARGET) != QLA_SUCCESS) {
+		ql_log(ql_log_warn, vha, 0x800d,
+		    "wait for pending cmds failed for cmd=%p.\n", cmd);
+		goto eh_reset_failed;
+	}
+
+	ql_log(ql_log_info, vha, 0x800e,
+	    "TARGET RESET SUCCEEDED nexus:%ld:%d cmd=%p.\n",
+	    vha->host_no, sdev->id, cmd);
+
+	return SUCCESS;
+
+eh_reset_failed:
+	ql_log(ql_log_info, vha, 0x800f,
+	    "TARGET RESET FAILED: %s nexus=%ld:%d:%llu cmd=%p.\n",
+	    reset_errors[err], vha->host_no, cmd->device->id, cmd->device->lun,
+	    cmd);
+	vha->reset_cmd_err_cnt++;
+	return FAILED;
 }
 
 /**************************************************************************
Signature · 1 line
2.29.2
maintainer Reviewed-by on v1 2/3
#5 lore raw

RE: [EXT] [PATCH 2/3] qla2xxx: Open-code qla2xxx_eh_target_reset()

Quoted 101 lines

-----Original Message-----
From: Hannes Reinecke <[email protected]>
Sent: Thursday, August 19, 2021 2:49 PM
To: Martin K. Petersen <[email protected]>
Cc: Christoph Hellwig <[email protected]>; James Bottomley <[email protected]>; Nilesh Javali <[email protected]>; [email protected]; Hannes Reinecke <[email protected]>
Subject: [EXT] [PATCH 2/3] qla2xxx: Open-code qla2xxx_eh_target_reset()

External Email

----------------------------------------------------------------------
Device reset and target reset will be using different calling sequences, so open-code __qla2xxx_eh_generic_reset() in qla2xxx_eh_target_reset(). No functional changes.

---
 drivers/scsi/qla2xxx/qla_os.c | 56 +++++++++++++++++++++++++++++++++--
 1 file changed, 53 insertions(+), 3 deletions(-)
drivers/scsi/qla2xxx/qla_os.c +53 -3
index 54254bd3a7d7..7786af46224a 100644
@@ -1466,8 +1466,12 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
 static int
 qla2xxx_eh_target_reset(struct scsi_cmnd *cmd)
 {
-	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
+	struct scsi_device *sdev = cmd->device;
+	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
+	scsi_qla_host_t *vha = shost_priv(rport_to_shost(rport));
 	struct qla_hw_data *ha = vha->hw;
+	fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
+	int err;
 
 	if (qla2x00_isp_reg_stat(ha)) {
 		ql_log(ql_log_info, vha, 0x803f,
@@ -1476,8 +1480,54 @@ qla2xxx_eh_target_reset(struct scsi_cmnd *cmd)
 		return FAILED;
 	}
 
-	return __qla2xxx_eh_generic_reset("TARGET", WAIT_TARGET, cmd,
-	    ha->isp_ops->target_reset);
+	if (!fcport) {
+		return FAILED;
+	}
+
+	err = fc_block_rport(rport);
+	if (err != 0)
+		return err;
+
+	if (fcport->deleted)
+		return SUCCESS;
+
+	ql_log(ql_log_info, vha, 0x8009,
+	    "TARGET RESET ISSUED nexus=%ld:%d cmd=%p.\n", vha->host_no,
+	    sdev->id, cmd);
+
+	err = 0;
+	if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
+		ql_log(ql_log_warn, vha, 0x800a,
+		    "Wait for hba online failed for cmd=%p.\n", cmd);
+		goto eh_reset_failed;
+	}
+	err = 2;
+	if (ha->isp_ops->target_reset(fcport, 0, 0) != QLA_SUCCESS) {
+		ql_log(ql_log_warn, vha, 0x800c,
+		    "target_reset failed for cmd=%p.\n", cmd);
+		goto eh_reset_failed;
+	}
+	err = 3;
+	if (qla2x00_eh_wait_for_pending_commands(vha, sdev->id,
+	    0, WAIT_TARGET) != QLA_SUCCESS) {
+		ql_log(ql_log_warn, vha, 0x800d,
+		    "wait for pending cmds failed for cmd=%p.\n", cmd);
+		goto eh_reset_failed;
+	}
+
+	ql_log(ql_log_info, vha, 0x800e,
+	    "TARGET RESET SUCCEEDED nexus:%ld:%d cmd=%p.\n",
+	    vha->host_no, sdev->id, cmd);
+
+	return SUCCESS;
+
+eh_reset_failed:
+	ql_log(ql_log_info, vha, 0x800f,
+	    "TARGET RESET FAILED: %s nexus=%ld:%d:%llu cmd=%p.\n",
+	    reset_errors[err], vha->host_no, cmd->device->id, cmd->device-
 >lun,
+	    cmd);
+	vha->reset_cmd_err_cnt++;
+	return FAILED;
 }
 
Quoted 4 lines

/***************************************************************
***********
--
2.29.2

#6 lore raw

PATCH 3/3 qla2xxx: Open-code qla2xxx_eh_device_reset()

In reply to Hannes Reinecke

Device reset and target reset will be using different calling sequences, so open-code __qla2xxx_eh_generic_reset() in qla2xxx_eh_device_reset(), and remove the now obsolete function __qla2xxx_eh_generic_reset(). No functional changes.

---
 drivers/scsi/qla2xxx/qla_os.c | 54 +++++++++++++++--------------------
 1 file changed, 23 insertions(+), 31 deletions(-)
drivers/scsi/qla2xxx/qla_os.c +23 -31
index 7786af46224a..ea804dc69b6f 100644
@@ -1388,18 +1388,27 @@ static char *reset_errors[] = {
 };
 
 static int
-__qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
-    struct scsi_cmnd *cmd, int (*do_reset)(struct fc_port *, uint64_t, int))
+qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
 {
-	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
-	fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
+	struct scsi_device *sdev = cmd->device;
+	scsi_qla_host_t *vha = shost_priv(sdev->host);
+	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
+	fc_port_t *fcport = (struct fc_port *) sdev->hostdata;
+	struct qla_hw_data *ha = vha->hw;
 	int err;
 
+	if (qla2x00_isp_reg_stat(ha)) {
+		ql_log(ql_log_info, vha, 0x803e,
+		    "PCI/Register disconnect, exiting.\n");
+		qla_pci_set_eeh_busy(vha);
+		return FAILED;
+	}
+
 	if (!fcport) {
 		return FAILED;
 	}
 
-	err = fc_block_scsi_eh(cmd);
+	err = fc_block_rport(rport);
 	if (err != 0)
 		return err;
 
@@ -1407,8 +1416,8 @@ __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
 		return SUCCESS;
 
 	ql_log(ql_log_info, vha, 0x8009,
-	    "%s RESET ISSUED nexus=%ld:%d:%llu cmd=%p.\n", name, vha->host_no,
-	    cmd->device->id, cmd->device->lun, cmd);
+	    "DEVICE RESET ISSUED nexus=%ld:%d:%llu cmd=%p.\n", vha->host_no,
+	    sdev->id, sdev->lun, cmd);
 
 	err = 0;
 	if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
@@ -1417,52 +1426,35 @@ __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
 		goto eh_reset_failed;
 	}
 	err = 2;
-	if (do_reset(fcport, cmd->device->lun, 1)
+	if (ha->isp_ops->lun_reset(fcport, sdev->lun, 1)
 		!= QLA_SUCCESS) {
 		ql_log(ql_log_warn, vha, 0x800c,
 		    "do_reset failed for cmd=%p.\n", cmd);
 		goto eh_reset_failed;
 	}
 	err = 3;
-	if (qla2x00_eh_wait_for_pending_commands(vha, cmd->device->id,
-	    cmd->device->lun, type) != QLA_SUCCESS) {
+	if (qla2x00_eh_wait_for_pending_commands(vha, sdev->id,
+	    sdev->lun, WAIT_LUN) != QLA_SUCCESS) {
 		ql_log(ql_log_warn, vha, 0x800d,
 		    "wait for pending cmds failed for cmd=%p.\n", cmd);
 		goto eh_reset_failed;
 	}
 
 	ql_log(ql_log_info, vha, 0x800e,
-	    "%s RESET SUCCEEDED nexus:%ld:%d:%llu cmd=%p.\n", name,
-	    vha->host_no, cmd->device->id, cmd->device->lun, cmd);
+	    "DEVICE RESET SUCCEEDED nexus:%ld:%d:%llu cmd=%p.\n",
+	    vha->host_no, sdev->id, sdev->lun, cmd);
 
 	return SUCCESS;
 
 eh_reset_failed:
 	ql_log(ql_log_info, vha, 0x800f,
-	    "%s RESET FAILED: %s nexus=%ld:%d:%llu cmd=%p.\n", name,
-	    reset_errors[err], vha->host_no, cmd->device->id, cmd->device->lun,
+	    "DEVICE RESET FAILED: %s nexus=%ld:%d:%llu cmd=%p.\n",
+	    reset_errors[err], vha->host_no, sdev->id, sdev->lun,
 	    cmd);
 	vha->reset_cmd_err_cnt++;
 	return FAILED;
 }
 
-static int
-qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
-{
-	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
-	struct qla_hw_data *ha = vha->hw;
-
-	if (qla2x00_isp_reg_stat(ha)) {
-		ql_log(ql_log_info, vha, 0x803e,
-		    "PCI/Register disconnect, exiting.\n");
-		qla_pci_set_eeh_busy(vha);
-		return FAILED;
-	}
-
-	return __qla2xxx_eh_generic_reset("DEVICE", WAIT_LUN, cmd,
-	    ha->isp_ops->lun_reset);
-}
-
 static int
 qla2xxx_eh_target_reset(struct scsi_cmnd *cmd)
 {
Signature · 1 line
2.29.2
maintainer Reviewed-by on v1 3/3
#7 lore raw

RE: [EXT] [PATCH 3/3] qla2xxx: Open-code qla2xxx_eh_device_reset()

Quoted 137 lines

-----Original Message-----
From: Hannes Reinecke <[email protected]>
Sent: Thursday, August 19, 2021 2:49 PM
To: Martin K. Petersen <[email protected]>
Cc: Christoph Hellwig <[email protected]>; James Bottomley <[email protected]>; Nilesh Javali <[email protected]>; [email protected]; Hannes Reinecke <[email protected]>
Subject: [EXT] [PATCH 3/3] qla2xxx: Open-code qla2xxx_eh_device_reset()

External Email

----------------------------------------------------------------------
Device reset and target reset will be using different calling sequences, so open-code __qla2xxx_eh_generic_reset() in qla2xxx_eh_device_reset(), and remove the now obsolete function __qla2xxx_eh_generic_reset(). No functional changes.

---
 drivers/scsi/qla2xxx/qla_os.c | 54 +++++++++++++++--------------------
 1 file changed, 23 insertions(+), 31 deletions(-)
drivers/scsi/qla2xxx/qla_os.c +16 -7
index 7786af46224a..ea804dc69b6f 100644
@@ -1388,18 +1388,27 @@ static char *reset_errors[] = {
 };
 
 static int
-__qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
-    struct scsi_cmnd *cmd, int (*do_reset)(struct fc_port *, uint64_t, int))
+qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
 {
-	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
-	fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
+	struct scsi_device *sdev = cmd->device;
+	scsi_qla_host_t *vha = shost_priv(sdev->host);
+	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
+	fc_port_t *fcport = (struct fc_port *) sdev->hostdata;
+	struct qla_hw_data *ha = vha->hw;
 	int err;
 
+	if (qla2x00_isp_reg_stat(ha)) {
+		ql_log(ql_log_info, vha, 0x803e,
+		    "PCI/Register disconnect, exiting.\n");
+		qla_pci_set_eeh_busy(vha);
+		return FAILED;
+	}
+
 	if (!fcport) {
 		return FAILED;
 	}
 
-	err = fc_block_scsi_eh(cmd);
+	err = fc_block_rport(rport);
 	if (err != 0)
 		return err;
 
@@ -1407,8 +1416,8 @@ __qla2xxx_eh_generic_reset(char *name, enum
 nexus_wait_type type,
 		return SUCCESS;
 
 	ql_log(ql_log_info, vha, 0x8009,
-	    "%s RESET ISSUED nexus=%ld:%d:%llu cmd=%p.\n", name, vha-
 >host_no,
-	    cmd->device->id, cmd->device->lun, cmd);
+	    "DEVICE RESET ISSUED nexus=%ld:%d:%llu cmd=%p.\n", vha-
 >host_no,
+	    sdev->id, sdev->lun, cmd);
drivers/scsi/qla2xxx/qla_os.c +7 -24
 	err = 0;
 	if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
@@ -1417,52 +1426,35 @@ __qla2xxx_eh_generic_reset(char *name, enum
 nexus_wait_type type,
 		goto eh_reset_failed;
 	}
 	err = 2;
-	if (do_reset(fcport, cmd->device->lun, 1)
+	if (ha->isp_ops->lun_reset(fcport, sdev->lun, 1)
 		!= QLA_SUCCESS) {
 		ql_log(ql_log_warn, vha, 0x800c,
 		    "do_reset failed for cmd=%p.\n", cmd);
 		goto eh_reset_failed;
 	}
 	err = 3;
-	if (qla2x00_eh_wait_for_pending_commands(vha, cmd->device->id,
-	    cmd->device->lun, type) != QLA_SUCCESS) {
+	if (qla2x00_eh_wait_for_pending_commands(vha, sdev->id,
+	    sdev->lun, WAIT_LUN) != QLA_SUCCESS) {
 		ql_log(ql_log_warn, vha, 0x800d,
 		    "wait for pending cmds failed for cmd=%p.\n", cmd);
 		goto eh_reset_failed;
 	}
 
 	ql_log(ql_log_info, vha, 0x800e,
-	    "%s RESET SUCCEEDED nexus:%ld:%d:%llu cmd=%p.\n", name,
-	    vha->host_no, cmd->device->id, cmd->device->lun, cmd);
+	    "DEVICE RESET SUCCEEDED nexus:%ld:%d:%llu cmd=%p.\n",
+	    vha->host_no, sdev->id, sdev->lun, cmd);
 
 	return SUCCESS;
 
 eh_reset_failed:
 	ql_log(ql_log_info, vha, 0x800f,
-	    "%s RESET FAILED: %s nexus=%ld:%d:%llu cmd=%p.\n", name,
-	    reset_errors[err], vha->host_no, cmd->device->id, cmd->device-
 >lun,
+	    "DEVICE RESET FAILED: %s nexus=%ld:%d:%llu cmd=%p.\n",
+	    reset_errors[err], vha->host_no, sdev->id, sdev->lun,
 	    cmd);
 	vha->reset_cmd_err_cnt++;
 	return FAILED;
 }
 
-static int
-qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
-{
-	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
-	struct qla_hw_data *ha = vha->hw;
-
-	if (qla2x00_isp_reg_stat(ha)) {
-		ql_log(ql_log_info, vha, 0x803e,
-		    "PCI/Register disconnect, exiting.\n");
-		qla_pci_set_eeh_busy(vha);
-		return FAILED;
-	}
-
-	return __qla2xxx_eh_generic_reset("DEVICE", WAIT_LUN, cmd,
-	    ha->isp_ops->lun_reset);
-}
-
 static int
Quoted 4 lines

qla2xxx_eh_target_reset(struct scsi_cmnd *cmd)
{
--
2.29.2

#8 lore raw
In reply to Hannes Reinecke
Quoted 8 lines · Hannes Reinecke

with the SCSI EH rework the scsi_cmnd argument for the SCSI EH callbacks is going away, so we need to fixup the drivers to work without it.

This patchset modifies the qla2xxx driver to not rely on a specific command for the SCSI EH callbacks.

[...]

Applied to 5.15/scsi-queue, thanks!

[1/3] qla2xxx: Do not call fc_block_scsi_eh() during bus reset

      https://git.kernel.org/mkp/scsi/c/c74ce061f898
[2/3] qla2xxx: Open-code qla2xxx_eh_target_reset()
      https://git.kernel.org/mkp/scsi/c/e56b2234ab64
[3/3] qla2xxx: Open-code qla2xxx_eh_device_reset()
      https://git.kernel.org/mkp/scsi/c/cbe1f0d70072
Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering