Skip to contentSkip to conversation

ncr53c8xx: Fixes for SCSI EH rework

PATCH Applied Hannes Reinecke 3 participants 9 messages Aug 20, 2021 – Aug 28, 2021 SCSI

lore
Share & tools
lore
#0 lore raw

cover ncr53c8xx: Fixes for SCSI EH rework

Hi all,

with the SCSI EH rework the scsi_cmnd argument for the SCSI EH callbacks is going away, so we need to fixup the drivers to work without it.

This patchset modifies the ncr53c8xx driver to not rely on a specific command for the SCSI EH callbacks.

As usual, comments and reviews are welcome.

Hannes Reinecke (3):
ncr53c8xx: remove 'sync_reset' argument from ncr_reset_bus()
ncr53c8xx: Complete all commands during bus reset
ncr53c8xx: Remove unused code

 drivers/scsi/ncr53c8xx.c | 199 +--------------------------------------
 1 file changed, 2 insertions(+), 197 deletions(-)
Signature · 1 line
2.29.2
#1 lore raw

PATCH 1/3 ncr53c8xx: remove 'sync_reset' argument from ncr_reset_bus()

From: Hannes Reinecke <[email protected]>

Always '1', so we can remove it.

---
 drivers/scsi/ncr53c8xx.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/scsi/ncr53c8xx.c +5 -6
index c76e9f05d042..3d2daaf2368c 100644
@@ -4553,7 +4553,7 @@ static void ncr_start_reset(struct ncb *np)
 **
 **==========================================================
 */
-static int ncr_reset_bus (struct ncb *np, struct scsi_cmnd *cmd, int sync_reset)
+static int ncr_reset_bus (struct ncb *np, struct scsi_cmnd *cmd)
 {
 /*	struct scsi_device        *device    = cmd->device; */
 	struct ccb *cp;
@@ -4600,11 +4600,10 @@ static int ncr_reset_bus (struct ncb *np, struct scsi_cmnd *cmd, int sync_reset)
 	ncr_wakeup(np, HS_RESET);
 /*
  * If the involved command was not in a driver queue, and the 
- * scsi driver told us reset is synchronous, and the command is not 
- * currently in the waiting list, complete it with DID_RESET status,
- * in order to keep it alive.
+ * command is not currently in the waiting list, complete it
+ * with DID_RESET status in order to keep it alive.
  */
-	if (!found && sync_reset && !retrieve_from_waiting_list(0, np, cmd)) {
+	if (!found && !retrieve_from_waiting_list(0, np, cmd)) {
 		set_host_byte(cmd, DID_RESET);
 		ncr_queue_done_cmd(np, cmd);
 	}
@@ -8125,7 +8124,7 @@ static int ncr53c8xx_bus_reset(struct scsi_cmnd *cmd)
 	 */
 
 	spin_lock_irqsave(&np->smp_lock, flags);
-	sts = ncr_reset_bus(np, cmd, 1);
+	sts = ncr_reset_bus(np, cmd);
 
 	done_list     = np->done_list;
 	np->done_list = NULL;
Signature · 1 line
2.29.2
#3 lore raw

PATCH 2/3 ncr53c8xx: Complete all commands during bus reset

In reply to Hannes Reinecke

From: Hannes Reinecke <[email protected]>

ncr_reset_bus() will complete all outstanding commands anyway, so there's no need to single out a specific command.

---
 drivers/scsi/ncr53c8xx.c | 35 ++---------------------------------
 1 file changed, 2 insertions(+), 33 deletions(-)
drivers/scsi/ncr53c8xx.c +2 -33
index 3d2daaf2368c..1c1f5df83dca 100644
@@ -4553,12 +4553,8 @@ static void ncr_start_reset(struct ncb *np)
 **
 **==========================================================
 */
-static int ncr_reset_bus (struct ncb *np, struct scsi_cmnd *cmd)
+static int ncr_reset_bus (struct ncb *np)
 {
-/*	struct scsi_device        *device    = cmd->device; */
-	struct ccb *cp;
-	int found;
-
 /*
  * Return immediately if reset is in progress.
  */
@@ -4572,24 +4568,6 @@ static int ncr_reset_bus (struct ncb *np, struct scsi_cmnd *cmd)
  * delay of 2 seconds will be completed.
  */
 	ncr_start_reset(np);
-/*
- * First, look in the wakeup list
- */
-	for (found=0, cp=np->ccb; cp; cp=cp->link_ccb) {
-		/*
-		**	look for the ccb of this command.
-		*/
-		if (cp->host_status == HS_IDLE) continue;
-		if (cp->cmd == cmd) {
-			found = 1;
-			break;
-		}
-	}
-/*
- * Then, look in the waiting list
- */
-	if (!found && retrieve_from_waiting_list(0, np, cmd))
-		found = 1;
 /*
  * Wake-up all awaiting commands with DID_RESET.
  */
@@ -4598,15 +4576,6 @@ static int ncr_reset_bus (struct ncb *np, struct scsi_cmnd *cmd)
  * Wake-up all pending commands with HS_RESET -> DID_RESET.
  */
 	ncr_wakeup(np, HS_RESET);
-/*
- * If the involved command was not in a driver queue, and the 
- * command is not currently in the waiting list, complete it
- * with DID_RESET status in order to keep it alive.
- */
-	if (!found && !retrieve_from_waiting_list(0, np, cmd)) {
-		set_host_byte(cmd, DID_RESET);
-		ncr_queue_done_cmd(np, cmd);
-	}
 
 	return SUCCESS;
 }
@@ -8124,7 +8093,7 @@ static int ncr53c8xx_bus_reset(struct scsi_cmnd *cmd)
 	 */
 
 	spin_lock_irqsave(&np->smp_lock, flags);
-	sts = ncr_reset_bus(np, cmd);
+	sts = ncr_reset_bus(np);
 
 	done_list     = np->done_list;
 	np->done_list = NULL;
Signature · 1 line
2.29.2
#5 lore raw

PATCH 3/3 ncr53c8xx: Remove unused code

In reply to Hannes Reinecke

From: Hannes Reinecke <[email protected]>

---
 drivers/scsi/ncr53c8xx.c | 163 ---------------------------------------
 1 file changed, 163 deletions(-)
drivers/scsi/ncr53c8xx.c +0 -163
index 1c1f5df83dca..e7115cba4b28 100644
@@ -1453,11 +1453,6 @@ struct head {
 #define  xerr_status   phys.xerr_st
 #define  nego_status   phys.nego_st
 
-#if 0
-#define  sync_status   phys.sync_st
-#define  wide_status   phys.wide_st
-#endif
-
 /*==========================================================
 **
 **      Declaration of structs:     Data structure block
@@ -1980,9 +1975,6 @@ static inline char *ncr_name (struct ncb *np)
 #define	RELOC_SOFTC	0x40000000
 #define	RELOC_LABEL	0x50000000
 #define	RELOC_REGISTER	0x60000000
-#if 0
-#define	RELOC_KVAR	0x70000000
-#endif
 #define	RELOC_LABELH	0x80000000
 #define	RELOC_MASK	0xf0000000
 
@@ -1991,21 +1983,7 @@ static inline char *ncr_name (struct ncb *np)
 #define PADDRH(label)   (RELOC_LABELH | offsetof(struct scripth, label))
 #define	RADDR(label)	(RELOC_REGISTER | REG(label))
 #define	FADDR(label,ofs)(RELOC_REGISTER | ((REG(label))+(ofs)))
-#if 0
-#define	KVAR(which)	(RELOC_KVAR | (which))
-#endif
 
-#if 0
-#define	SCRIPT_KVAR_JIFFIES	(0)
-#define	SCRIPT_KVAR_FIRST		SCRIPT_KVAR_JIFFIES
-#define	SCRIPT_KVAR_LAST		SCRIPT_KVAR_JIFFIES
-/*
- * Kernel variables referenced in the scripts.
- * THESE MUST ALL BE ALIGNED TO A 4-BYTE BOUNDARY.
- */
-static void *script_kvars[] __initdata =
-	{ (void *)&jiffies };
-#endif
 
 static	struct script script0 __initdata = {
 /*--------------------------< START >-----------------------*/ {
@@ -2162,11 +2140,6 @@ static	struct script script0 __initdata = {
 	SCR_COPY (1),
 		RADDR (scratcha),
 		NADDR (msgout),
-#if 0
-	SCR_COPY (1),
-		RADDR (scratcha),
-		NADDR (msgin),
-#endif
 	/*
 	**	Anticipate the COMMAND phase.
 	**	This is the normal case for initial selection.
@@ -4378,10 +4351,6 @@ static int ncr_queue_command (struct ncb *np, struct scsi_cmnd *cmd)
 	cp->parity_status		= 0;
 
 	cp->xerr_status			= XE_OK;
-#if 0
-	cp->sync_status			= tp->sval;
-	cp->wide_status			= tp->wval;
-#endif
 
 	/*----------------------------------------------------
 	**
@@ -4580,89 +4549,6 @@ static int ncr_reset_bus (struct ncb *np)
 	return SUCCESS;
 }
 
-#if 0 /* unused and broken.. */
-/*==========================================================
-**
-**
-**	Abort an SCSI command.
-**	This is called from the generic SCSI driver.
-**
-**
-**==========================================================
-*/
-static int ncr_abort_command (struct ncb *np, struct scsi_cmnd *cmd)
-{
-/*	struct scsi_device        *device    = cmd->device; */
-	struct ccb *cp;
-	int found;
-	int retv;
-
-/*
- * First, look for the scsi command in the waiting list
- */
-	if (remove_from_waiting_list(np, cmd)) {
-		set_host_byte(cmd, DID_ABORT);
-		ncr_queue_done_cmd(np, cmd);
-		return SCSI_ABORT_SUCCESS;
-	}
-
-/*
- * Then, look in the wakeup list
- */
-	for (found=0, cp=np->ccb; cp; cp=cp->link_ccb) {
-		/*
-		**	look for the ccb of this command.
-		*/
-		if (cp->host_status == HS_IDLE) continue;
-		if (cp->cmd == cmd) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (!found) {
-		return SCSI_ABORT_NOT_RUNNING;
-	}
-
-	if (np->settle_time) {
-		return SCSI_ABORT_SNOOZE;
-	}
-
-	/*
-	**	If the CCB is active, patch schedule jumps for the 
-	**	script to abort the command.
-	*/
-
-	switch(cp->host_status) {
-	case HS_BUSY:
-	case HS_NEGOTIATE:
-		printk ("%s: abort ccb=%p (cancel)\n", ncr_name (np), cp);
-			cp->start.schedule.l_paddr =
-				cpu_to_scr(NCB_SCRIPTH_PHYS (np, cancel));
-		retv = SCSI_ABORT_PENDING;
-		break;
-	case HS_DISCONNECT:
-		cp->restart.schedule.l_paddr =
-				cpu_to_scr(NCB_SCRIPTH_PHYS (np, abort));
-		retv = SCSI_ABORT_PENDING;
-		break;
-	default:
-		retv = SCSI_ABORT_NOT_RUNNING;
-		break;
-
-	}
-
-	/*
-	**      If there are no requests, the script
-	**      processor will sleep on SEL_WAIT_RESEL.
-	**      Let's wake it up, since it may have to work.
-	*/
-	OUTB (nc_istat, SIGP);
-
-	return retv;
-}
-#endif
-
 static void ncr_detach(struct ncb *np)
 {
 	struct ccb *cp;
@@ -5421,27 +5307,6 @@ static void ncr_getsync(struct ncb *np, u_char sfac, u_char *fakp, u_char *scntl
 	*/
 	fak = (kpc - 1) / div_10M[div] + 1;
 
-#if 0	/* This optimization does not seem very useful */
-
-	per = (fak * div_10M[div]) / clk;
-
-	/*
-	**	Why not to try the immediate lower divisor and to choose 
-	**	the one that allows the fastest output speed ?
-	**	We don't want input speed too much greater than output speed.
-	*/
-	if (div >= 1 && fak < 8) {
-		u_long fak2, per2;
-		fak2 = (kpc - 1) / div_10M[div-1] + 1;
-		per2 = (fak2 * div_10M[div-1]) / clk;
-		if (per2 < per && fak2 <= 8) {
-			fak = fak2;
-			per = per2;
-			--div;
-		}
-	}
-#endif
-
 	if (fak < 4) fak = 4;	/* Should never happen, too bad ... */
 
 	/*
@@ -5479,10 +5344,6 @@ static void ncr_set_sync_wide_status (struct ncb *np, u_char target)
 	for (cp = np->ccb; cp; cp = cp->link_ccb) {
 		if (!cp->cmd) continue;
 		if (scmd_id(cp->cmd) != target) continue;
-#if 0
-		cp->sync_status = tp->sval;
-		cp->wide_status = tp->wval;
-#endif
 		cp->phys.select.sel_scntl3 = tp->wval;
 		cp->phys.select.sel_sxfer  = tp->sval;
 	}
@@ -8104,30 +7965,6 @@ static int ncr53c8xx_bus_reset(struct scsi_cmnd *cmd)
 	return sts;
 }
 
-#if 0 /* unused and broken */
-static int ncr53c8xx_abort(struct scsi_cmnd *cmd)
-{
-	struct ncb *np = ((struct host_data *) cmd->device->host->hostdata)->ncb;
-	int sts;
-	unsigned long flags;
-	struct scsi_cmnd *done_list;
-
-	printk("ncr53c8xx_abort\n");
-
-	NCR_LOCK_NCB(np, flags);
-
-	sts = ncr_abort_command(np, cmd);
-out:
-	done_list     = np->done_list;
-	np->done_list = NULL;
-	NCR_UNLOCK_NCB(np, flags);
-
-	ncr_flush_done_cmds(done_list);
-
-	return sts;
-}
-#endif
-
 
 /*
 **	Scsi command waiting list management.
Signature · 1 line
2.29.2
#7 lore raw
In reply to Hannes Reinecke

Hannes,

Quoted 6 lines

with the SCSI EH rework the scsi_cmnd argument for the SCSI EH callbacks is going away, so we need to fixup the drivers to work without it.

This patchset modifies the ncr53c8xx driver to not rely on a specific command for the SCSI EH callbacks.

Applied to 5.15/scsi-staging, thanks!

Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering
#8 lore raw
In reply to Hannes Reinecke
Quoted 8 lines · Hannes Reinecke

with the SCSI EH rework the scsi_cmnd argument for the SCSI EH callbacks is going away, so we need to fixup the drivers to work without it.

This patchset modifies the ncr53c8xx driver to not rely on a specific command for the SCSI EH callbacks.

[...]

Applied to 5.15/scsi-queue, thanks!

[1/3] ncr53c8xx: remove 'sync_reset' argument from ncr_reset_bus()

      https://git.kernel.org/mkp/scsi/c/227a13cf12f9
[2/3] ncr53c8xx: Complete all commands during bus reset
      https://git.kernel.org/mkp/scsi/c/f434e4984f5f
[3/3] ncr53c8xx: Remove unused code
      https://git.kernel.org/mkp/scsi/c/1c22e327545c
Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering