kbuild: Enable dtc 'pci_device_reg' warning by default
PATCH 1/1 kbuild: Enable dtc 'pci_device_reg' warning by default
There's only a couple of instances of the 'pci_device_reg' warnings left and they look legit, so let's enable the warning by default.
---
These are the 2 remaining warnings:
arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi:464.3-52: Warning (pci_device_reg): /pcie@f8000000/pcie@0,0:reg: PCI reg address is not configuration space arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning (pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format error, expected "0,0"
--- scripts/Makefile.lib | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
scripts/Makefile.lib +1 -2
@@ -309,8 +309,7 @@ DTC_FLAGS += -Wno-unit_address_vs_reg \ -Wno-alias_paths \ -Wno-graph_child_address \ -Wno-simple_bus_reg \ - -Wno-unique_unit_address \ - -Wno-pci_device_reg + -Wno-unique_unit_address endif ifneq ($(findstring 2,$(KBUILD_EXTRA_WARN)),)
Signature · 1 line
2.30.2
Quoted 7 lines · Rob Herring
There's only a couple of instances of the '
pci_device_reg' warnings left and they look legit, so let's enable the warning by default.Cc Heiko Stuebner <[email protected]>Cc Nicolas Saenz Julienne <[email protected]>Signed-off-by Rob Herring <[email protected]>
Quoted 5 lines
---
These are the 2 remaining warnings:arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi:464.3-52: Warning (
pci_device_reg): /pcie@f8000000/pcie@0,0:reg: PCI reg address is not configuration space arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning (pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format error, expected "0,0"
Just for the record, bcm2771 issue is being fixed here:
https://lkml.org/lkml/2021/8/30/232
Regards,
Nicolas