watchdog: Add a driver for the sunxi watchdog
Samuel Holland
maintainerPATCH 1/3 watchdog: Add a driver for the sunxi watchdog
This driver supports the sun4i/sun6i/sun20i watchdog timers. They have a maximum timeout of 16 seconds.
---
drivers/watchdog/Kconfig | 8 ++ drivers/watchdog/Makefile | 1 + drivers/watchdog/sunxi_wdt.c | 188 +++++++++++++++++++++++++++++++++++ 3 files changed, 197 insertions(+) create mode 100644 drivers/watchdog/sunxi_wdt.c
drivers/watchdog/Kconfig +8 -0
@@ -27,6 +27,7 @@ config WATCHDOG_TIMEOUT_MSECS default 128000 if ARCH_MX25 || ARCH_MX31 || ARCH_MX5 || ARCH_MX6 default 128000 if ARCH_MX7 || ARCH_VF610 default 30000 if ARCH_SOCFPGA + default 16000 if ARCH_SUNXI default 60000 help Watchdog timeout in msec
@@ -241,6 +242,13 @@ config WDT_STM32MP Enable the STM32 watchdog (IWDG) driver. Enable support to configure STM32's on-SoC watchdog. +config WDT_SUNXI + bool "Allwinner sunxi watchdog timer support" + depends on WDT && ARCH_SUNXI + default y + help + Enable support for the watchdog timer in Allwinner sunxi SoCs. + config XILINX_TB_WATCHDOG bool "Xilinx Axi watchdog timer support" depends on WDT
drivers/watchdog/Makefile +1 -0
@@ -35,5 +35,6 @@ obj-$(CONFIG_WDT_SBSA) += sbsa_gwdt.o obj-$(CONFIG_WDT_K3_RTI) += rti_wdt.o obj-$(CONFIG_WDT_SP805) += sp805_wdt.o obj-$(CONFIG_WDT_STM32MP) += stm32mp_wdt.o +obj-$(CONFIG_WDT_SUNXI) += sunxi_wdt.o obj-$(CONFIG_WDT_TANGIER) += tangier_wdt.o obj-$(CONFIG_WDT_XILINX) += xilinx_wwdt.o
drivers/watchdog/sunxi_wdt.c new file +188 -0
188 lines not on this page · raw message
Signature · 1 line
2.31.1
Samuel Holland
maintainerPATCH 2/3 sunxi: Enable watchdog timer support by default
A watchdog helps recover from hangs or failure to boot an OS. It can also be used by the sysreset framework to intentionally reset the system. Now that a driver is available, let's enable this functionality on sunxi boards.
---
arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm/Kconfig +1 -0
@@ -1036,6 +1036,7 @@ config ARCH_SUNXI imply SPL_POWER imply SPL_SERIAL_SUPPORT imply USB_GADGET + imply WDT config ARCH_U8500 bool "ST-Ericsson U8500 Series"
Signature · 1 line
2.31.1
Samuel Holland
maintainerPATCH 3/3 sunxi: dts: H616: Enable the watchdog
In reply to Samuel HollandFor some reason, the watchdog was disabled in the H616 device tree. Most likely this is a copy-paste from the H6 device tree: the H6 watchdog is disabled because it is broken in some chips. However, there is no evidence of issues with the H616 watchdog.
Enable the watchdog node so it can be used by the driver.
---
arch/arm/dts/sun50i-h616.dtsi | 1 - 1 file changed, 1 deletion(-)
arch/arm/dts/sun50i-h616.dtsi +0 -1
@@ -122,7 +122,6 @@ reg = <0x030090a0 0x20>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&osc24M>; - status = "disabled"; }; pio: pinctrl@300b000 {
Signature · 1 line
2.31.1