include: dt-bindings: mfd: add atmel flexcom include file
Subsystems (4)
PATCH 1/2 include: dt-bindings: mfd: add atmel flexcom include file
Add dt-bindings include file for Atmel Flexcom hardware block. This file is copied from Linux kernel.
It is used in devicetrees from Linux.
Signed-off-by Eugen Hristev <[email protected]>
--- MAINTAINERS | 1 + include/dt-bindings/mfd/atmel-flexcom.h | 15 +++++++++++++++ 2 files changed, 16 insertions(+) create mode 100644 include/dt-bindings/mfd/atmel-flexcom.h
MAINTAINERS +1 -0
@@ -312,6 +312,7 @@ F: arch/arm/mach-at91/ F: board/atmel/ F: drivers/cpu/at91_cpu.c F: drivers/misc/microchip_flexcom.c +F: include/dt-bindings/mfd/atmel-flexcom.h F: drivers/timer/mchp-pit64b-timer.c ARM NEXELL S5P4418
include/dt-bindings/mfd/atmel-flexcom.h new file +15 -0
@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* +* This header provides macros for Atmel Flexcom DT bindings. +* +* Copyright (C) 2015 Cyrille Pitchen <[email protected]> +*/ + +#ifndef __DT_BINDINGS_ATMEL_FLEXCOM_H__ +#define __DT_BINDINGS_ATMEL_FLEXCOM_H__ + +#define ATMEL_FLEXCOM_MODE_USART 1 +#define ATMEL_FLEXCOM_MODE_SPI 2 +#define ATMEL_FLEXCOM_MODE_TWI 3 + +#endif /* __DT_BINDINGS_ATMEL_FLEXCOM_H__ */
Signature · 1 line
2.25.1
PATCH 2/2 ARM: dts: at91: update flexcom defines using include file
Replace the number in the flexcom-mode property with the define from the include file.
This corresponds to the approach in Linux kernel.
Signed-off-by Eugen Hristev <[email protected]>
--- arch/arm/dts/sam9x60ek.dts | 3 ++- arch/arm/dts/sama7g5ek.dts | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-)
arch/arm/dts/sam9x60ek.dts +2 -1
@@ -7,6 +7,7 @@ * Author: Sandeep Sheriker M <[email protected]> */ /dts-v1/; +#include <dt-bindings/mfd/atmel-flexcom.h> #include "sam9x60.dtsi" / {
@@ -57,7 +58,7 @@ }; flx0: flexcom@f801c600 { - atmel,flexcom-mode = <3>; + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; status = "okay"; i2c@600 {
arch/arm/dts/sama7g5ek.dts +2 -1
@@ -8,6 +8,7 @@ * 2020, Claudiu Beznea <[email protected]> */ /dts-v1/; +#include <dt-bindings/mfd/atmel-flexcom.h> #include "sama7g5.dtsi" #include "sama7g5-pinfunc.h"
@@ -64,7 +65,7 @@ }; &flx1 { - atmel,flexcom-mode = <3>; + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; status = "okay"; };
Signature · 1 line
2.25.1
Quoted 6 lines · Eugen Hristev
Add dt-bindings include file for Atmel Flexcom hardware block. This file is copied from Linux kernel.
It is used in devicetrees from Linux.Signed-off-by Eugen Hristev <[email protected]>---
Applied series to u-boot-atmel/next