Skip to contentSkip to conversation

virtio/pci: Size the MSI-X bar according to the number of MSI-X

PATCH Applied Marc Zyngier 3 participants 5 messages Aug 27, 2021 – Aug 31, 2021

Subsystems (2)
lore
Share & tools
lore

Marc Zyngier

author maintainer
#0 lore raw

PATCH 1/1 virtio/pci: Size the MSI-X bar according to the number of MSI-X

Since 45d3b59e8c45 ("kvm tools: Increase amount of possible interrupts per PCI device"), the number of MSI-S has gone from 4 to 33.

However, the corresponding storage hasn't been upgraded, and writing to the MSI-X table is a pretty risky business. Now that the Linux kernel writes to *all* MSI-X entries before doing anything else with the device, kvmtool dies a horrible death.

Fix it by properly defining the size of the MSI-X bar, and make Linux great again.

This includes some fixes the PBA region decoding, as well as minor cleanups to make this code a bit more maintainable.

---
 virtio/pci.c | 42 ++++++++++++++++++++++++++++++------------
 1 file changed, 30 insertions(+), 12 deletions(-)
virtio/pci.c +30 -12
index eb91f512..41085291 100644
@@ -7,6 +7,7 @@
 #include "kvm/irq.h"
 #include "kvm/virtio.h"
 #include "kvm/ioeventfd.h"
+#include "kvm/util.h"
 
 #include <sys/ioctl.h>
 #include <linux/virtio_pci.h>
@@ -14,6 +15,13 @@
 #include <assert.h>
 #include <string.h>
 
+#define ALIGN_UP(x, s)		ALIGN((x) + (s) - 1, (s))
+#define VIRTIO_NR_MSIX		(VIRTIO_PCI_MAX_VQ + VIRTIO_PCI_MAX_CONFIG)
+#define VIRTIO_MSIX_TABLE_SIZE	(VIRTIO_NR_MSIX * 16)
+#define VIRTIO_MSIX_PBA_SIZE	(ALIGN_UP(VIRTIO_MSIX_TABLE_SIZE, 64) / 8)
+#define VIRTIO_MSIX_BAR_SIZE	(1UL << fls_long(VIRTIO_MSIX_TABLE_SIZE + \
+						 VIRTIO_MSIX_PBA_SIZE))
+
 static u16 virtio_pci__port_addr(struct virtio_pci *vpci)
 {
 	return pci__bar_address(&vpci->pci_hdr, 0);
@@ -333,18 +341,27 @@ static void virtio_pci__msix_mmio_callback(struct kvm_cpu *vcpu,
 	struct virtio_pci *vpci = vdev->virtio;
 	struct msix_table *table;
 	u32 msix_io_addr = virtio_pci__msix_io_addr(vpci);
+	u32 pba_offset;
 	int vecnum;
 	size_t offset;
 
-	if (addr > msix_io_addr + PCI_IO_SIZE) {
+	BUILD_BUG_ON(VIRTIO_NR_MSIX > (sizeof(vpci->msix_pba) * 8));
+
+	pba_offset = vpci->pci_hdr.msix.pba_offset & ~PCI_MSIX_TABLE_BIR;
+	if (addr >= msix_io_addr + pba_offset) {
+		/* Read access to PBA */
 		if (is_write)
 			return;
-		table  = (struct msix_table *)&vpci->msix_pba;
-		offset = addr - (msix_io_addr + PCI_IO_SIZE);
-	} else {
-		table  = vpci->msix_table;
-		offset = addr - msix_io_addr;
+		offset = addr - (msix_io_addr + pba_offset);
+		if ((offset + len) > sizeof (vpci->msix_pba))
+			return;
+		memcpy(data, (void *)&vpci->msix_pba + offset, len);
+		return;
 	}
+
+	table  = vpci->msix_table;
+	offset = addr - msix_io_addr;
+
 	vecnum = offset / sizeof(struct msix_table);
 	offset = offset % sizeof(struct msix_table);
 
@@ -520,7 +537,7 @@ int virtio_pci__init(struct kvm *kvm, void *dev, struct virtio_device *vdev,
 
 	port_addr = pci_get_io_port_block(PCI_IO_SIZE);
 	mmio_addr = pci_get_mmio_block(PCI_IO_SIZE);
-	msix_io_block = pci_get_mmio_block(PCI_IO_SIZE * 2);
+	msix_io_block = pci_get_mmio_block(VIRTIO_MSIX_BAR_SIZE);
 
 	vpci->pci_hdr = (struct pci_device_header) {
 		.vendor_id		= cpu_to_le16(PCI_VENDOR_ID_REDHAT_QUMRANET),
@@ -543,7 +560,7 @@ int virtio_pci__init(struct kvm *kvm, void *dev, struct virtio_device *vdev,
 		.capabilities		= (void *)&vpci->pci_hdr.msix - (void *)&vpci->pci_hdr,
 		.bar_size[0]		= cpu_to_le32(PCI_IO_SIZE),
 		.bar_size[1]		= cpu_to_le32(PCI_IO_SIZE),
-		.bar_size[2]		= cpu_to_le32(PCI_IO_SIZE*2),
+		.bar_size[2]		= cpu_to_le32(VIRTIO_MSIX_BAR_SIZE),
 	};
 
 	r = pci__register_bar_regions(kvm, &vpci->pci_hdr,
@@ -560,8 +577,9 @@ int virtio_pci__init(struct kvm *kvm, void *dev, struct virtio_device *vdev,
 	vpci->pci_hdr.msix.cap = PCI_CAP_ID_MSIX;
 	vpci->pci_hdr.msix.next = 0;
 	/*
-	 * We at most have VIRTIO_PCI_MAX_VQ entries for virt queue,
-	 * VIRTIO_PCI_MAX_CONFIG entries for config.
+	 * We at most have VIRTIO_NR_MSIX entries (VIRTIO_PCI_MAX_VQ
+	 * entries for virt queue, VIRTIO_PCI_MAX_CONFIG entries for
+	 * config).
 	 *
 	 * To quote the PCI spec:
 	 *
@@ -570,11 +588,11 @@ int virtio_pci__init(struct kvm *kvm, void *dev, struct virtio_device *vdev,
 	 * For example, a returned value of "00000000011"
 	 * indicates a table size of 4.
 	 */
-	vpci->pci_hdr.msix.ctrl = cpu_to_le16(VIRTIO_PCI_MAX_VQ + VIRTIO_PCI_MAX_CONFIG - 1);
+	vpci->pci_hdr.msix.ctrl = cpu_to_le16(VIRTIO_NR_MSIX - 1);
 
 	/* Both table and PBA are mapped to the same BAR (2) */
 	vpci->pci_hdr.msix.table_offset = cpu_to_le32(2);
-	vpci->pci_hdr.msix.pba_offset = cpu_to_le32(2 | PCI_IO_SIZE);
+	vpci->pci_hdr.msix.pba_offset = cpu_to_le32(2 | VIRTIO_MSIX_TABLE_SIZE);
 	vpci->config_vector = 0;
 
 	if (irq__can_signal_msi(kvm))
Signature · 1 line
2.30.2
#1 lore raw

On Fri, 27 Aug 2021 12:54:05 +0100
Marc Zyngier <[email protected]> wrote:

Hi Marc,

Quoted 8 lines

Since 45d3b59e8c45 ("kvm tools: Increase amount of possible interrupts per PCI device"), the number of MSI-S has gone from 4 to 33.

However, the corresponding storage hasn't been upgraded, and writing to the MSI-X table is a pretty risky business. Now that the Linux kernel writes to *all* MSI-X entries before doing anything else with the device, kvmtool dies a horrible death.

Quoted 7 lines

Fix it by properly defining the size of the MSI-X bar, and make Linux great again.

This includes some fixes the PBA region decoding, as well as minor cleanups to make this code a bit more maintainable.

Many thanks for fixing this, it looks good to me now. Just some questions below:

Quoted 31 lines
---
 virtio/pci.c | 42 ++++++++++++++++++++++++++++++------------
 1 file changed, 30 insertions(+), 12 deletions(-)
virtio/pci.c +8 -0
index eb91f512..41085291 100644
@@ -7,6 +7,7 @@
 #include "kvm/irq.h"
 #include "kvm/virtio.h"
 #include "kvm/ioeventfd.h"
+#include "kvm/util.h"
 
 #include <sys/ioctl.h>
 #include <linux/virtio_pci.h>
@@ -14,6 +15,13 @@
 #include <assert.h>
 #include <string.h>
 
+#define ALIGN_UP(x, s)		ALIGN((x) + (s) - 1, (s))
+#define VIRTIO_NR_MSIX		(VIRTIO_PCI_MAX_VQ + VIRTIO_PCI_MAX_CONFIG)
+#define VIRTIO_MSIX_TABLE_SIZE	(VIRTIO_NR_MSIX * 16)
+#define VIRTIO_MSIX_PBA_SIZE	(ALIGN_UP(VIRTIO_MSIX_TABLE_SIZE, 64) / 8)
+#define VIRTIO_MSIX_BAR_SIZE	(1UL << fls_long(VIRTIO_MSIX_TABLE_SIZE + \
+						 VIRTIO_MSIX_PBA_SIZE))
+
 static u16 virtio_pci__port_addr(struct virtio_pci *vpci)
 {
 	return pci__bar_address(&vpci->pci_hdr, 0);

virtio/pci.c static void virtio_pci__msix_mmio_callback(struct kvm_cpu *vcpu, · line 339

Quoted 8 lines
virtio/pci.c +1 -1
@@ -333,18 +341,27 @@ static void virtio_pci__msix_mmio_callback(struct kvm_cpu *vcpu,
 	struct virtio_pci *vpci = vdev->virtio;
 	struct msix_table *table;
 	u32 msix_io_addr = virtio_pci__msix_io_addr(vpci);
+	u32 pba_offset;
 	int vecnum;
 	size_t offset;
 
-	if (addr > msix_io_addr + PCI_IO_SIZE) {

Ouch, the missing "=" looks like another long standing bug you fixed, I wonder how this ever worked before? Looking deeper it looks like the whole PBA code was quite broken (allowing writes, for instance, and mixing with the code for the MSIX table)?

virtio/pci.c static void virtio_pci__msix_mmio_callback(struct kvm_cpu *vcpu, · line 350

Quoted 3 lines
virtio/pci.c +3 -0
+	BUILD_BUG_ON(VIRTIO_NR_MSIX > (sizeof(vpci->msix_pba) * 8));
+
+	pba_offset = vpci->pci_hdr.msix.pba_offset & ~PCI_MSIX_TABLE_BIR;

Any particular reason you read back the offset from the MSIX capability instead of just using VIRTIO_MSIX_TABLE_SIZE here? Is that to avoid accidentally diverging in the future, by having just one place of definition?

virtio/pci.c static void virtio_pci__msix_mmio_callback(struct kvm_cpu *vcpu, · line 358

Quoted 13 lines
virtio/pci.c +6 -5
+	if (addr >= msix_io_addr + pba_offset) {
+		/* Read access to PBA */
 		if (is_write)
 			return;
-		table  = (struct msix_table *)&vpci->msix_pba;
-		offset = addr - (msix_io_addr + PCI_IO_SIZE);
-	} else {
-		table  = vpci->msix_table;
-		offset = addr - msix_io_addr;
+		offset = addr - (msix_io_addr + pba_offset);
+		if ((offset + len) > sizeof (vpci->msix_pba))
+			return;
+		memcpy(data, (void *)&vpci->msix_pba + offset, len);

Should this be a char* cast, since pointer arithmetic on void* is somewhat frowned upon (aka "forbidden in the C standard, but allowed as a GCC extension")?

Cheers,
Andre

Quoted 53 lines
virtio/pci.c +12 -6
+		return;
 	}
+
+	table  = vpci->msix_table;
+	offset = addr - msix_io_addr;
+
 	vecnum = offset / sizeof(struct msix_table);
 	offset = offset % sizeof(struct msix_table);
 
@@ -520,7 +537,7 @@ int virtio_pci__init(struct kvm *kvm, void *dev, struct virtio_device *vdev,
 
 	port_addr = pci_get_io_port_block(PCI_IO_SIZE);
 	mmio_addr = pci_get_mmio_block(PCI_IO_SIZE);
-	msix_io_block = pci_get_mmio_block(PCI_IO_SIZE * 2);
+	msix_io_block = pci_get_mmio_block(VIRTIO_MSIX_BAR_SIZE);
 
 	vpci->pci_hdr = (struct pci_device_header) {
 		.vendor_id		= cpu_to_le16(PCI_VENDOR_ID_REDHAT_QUMRANET),
@@ -543,7 +560,7 @@ int virtio_pci__init(struct kvm *kvm, void *dev, struct virtio_device *vdev,
 		.capabilities		= (void *)&vpci->pci_hdr.msix - (void *)&vpci->pci_hdr,
 		.bar_size[0]		= cpu_to_le32(PCI_IO_SIZE),
 		.bar_size[1]		= cpu_to_le32(PCI_IO_SIZE),
-		.bar_size[2]		= cpu_to_le32(PCI_IO_SIZE*2),
+		.bar_size[2]		= cpu_to_le32(VIRTIO_MSIX_BAR_SIZE),
 	};
 
 	r = pci__register_bar_regions(kvm, &vpci->pci_hdr,
@@ -560,8 +577,9 @@ int virtio_pci__init(struct kvm *kvm, void *dev, struct virtio_device *vdev,
 	vpci->pci_hdr.msix.cap = PCI_CAP_ID_MSIX;
 	vpci->pci_hdr.msix.next = 0;
 	/*
-	 * We at most have VIRTIO_PCI_MAX_VQ entries for virt queue,
-	 * VIRTIO_PCI_MAX_CONFIG entries for config.
+	 * We at most have VIRTIO_NR_MSIX entries (VIRTIO_PCI_MAX_VQ
+	 * entries for virt queue, VIRTIO_PCI_MAX_CONFIG entries for
+	 * config).
 	 *
 	 * To quote the PCI spec:
 	 *
@@ -570,11 +588,11 @@ int virtio_pci__init(struct kvm *kvm, void *dev, struct virtio_device *vdev,
 	 * For example, a returned value of "00000000011"
 	 * indicates a table size of 4.
 	 */
-	vpci->pci_hdr.msix.ctrl = cpu_to_le16(VIRTIO_PCI_MAX_VQ + VIRTIO_PCI_MAX_CONFIG - 1);
+	vpci->pci_hdr.msix.ctrl = cpu_to_le16(VIRTIO_NR_MSIX - 1);
 
 	/* Both table and PBA are mapped to the same BAR (2) */
 	vpci->pci_hdr.msix.table_offset = cpu_to_le32(2);
-	vpci->pci_hdr.msix.pba_offset = cpu_to_le32(2 | PCI_IO_SIZE);
+	vpci->pci_hdr.msix.pba_offset = cpu_to_le32(2 | VIRTIO_MSIX_TABLE_SIZE);
 	vpci->config_vector = 0;
 
 	if (irq__can_signal_msi(kvm))
author maintainer
#2 lore raw

Hi Andre,

Quoted 63 lines · Andre Przywara

On Fri, 27 Aug 2021 12:54:05 +0100
Marc Zyngier <[email protected]> wrote:

Hi Marc,

Quoted 8 lines

Since 45d3b59e8c45 ("kvm tools: Increase amount of possible interrupts per PCI device"), the number of MSI-S has gone from 4 to 33.

However, the corresponding storage hasn't been upgraded, and writing to the MSI-X table is a pretty risky business. Now that the Linux kernel writes to *all* MSI-X entries before doing anything else with the device, kvmtool dies a horrible death.

Quoted 7 lines

Fix it by properly defining the size of the MSI-X bar, and make Linux great again.

This includes some fixes the PBA region decoding, as well as minor cleanups to make this code a bit more maintainable.

Many thanks for fixing this, it looks good to me now. Just some questions below:

Quoted 38 lines
---
 virtio/pci.c | 42 ++++++++++++++++++++++++++++++------------
 1 file changed, 30 insertions(+), 12 deletions(-)
virtio/pci.c +9 -0
index eb91f512..41085291 100644
@@ -7,6 +7,7 @@
 #include "kvm/irq.h"
 #include "kvm/virtio.h"
 #include "kvm/ioeventfd.h"
+#include "kvm/util.h"
 
 #include <sys/ioctl.h>
 #include <linux/virtio_pci.h>
@@ -14,6 +15,13 @@
 #include <assert.h>
 #include <string.h>
 
+#define ALIGN_UP(x, s)		ALIGN((x) + (s) - 1, (s))
+#define VIRTIO_NR_MSIX		(VIRTIO_PCI_MAX_VQ + VIRTIO_PCI_MAX_CONFIG)
+#define VIRTIO_MSIX_TABLE_SIZE	(VIRTIO_NR_MSIX * 16)
+#define VIRTIO_MSIX_PBA_SIZE	(ALIGN_UP(VIRTIO_MSIX_TABLE_SIZE, 64) / 8)
+#define VIRTIO_MSIX_BAR_SIZE	(1UL << fls_long(VIRTIO_MSIX_TABLE_SIZE + \
+						 VIRTIO_MSIX_PBA_SIZE))
+
 static u16 virtio_pci__port_addr(struct virtio_pci *vpci)
 {
 	return pci__bar_address(&vpci->pci_hdr, 0);
@@ -333,18 +341,27 @@ static void virtio_pci__msix_mmio_callback(struct kvm_cpu *vcpu,
 	struct virtio_pci *vpci = vdev->virtio;
 	struct msix_table *table;
 	u32 msix_io_addr = virtio_pci__msix_io_addr(vpci);
+	u32 pba_offset;
 	int vecnum;
 	size_t offset;
 
Quoted 6 lines

virtio/pci.c static void virtio_pci__msix_mmio_callback(struct kvm_cpu *vcpu, · line 339

Quoted 1 line
virtio/pci.c +0 -1
-	if (addr > msix_io_addr + PCI_IO_SIZE) {

Ouch, the missing "=" looks like another long standing bug you fixed, I wonder how this ever worked before? Looking deeper it looks like the whole PBA code was quite broken (allowing writes, for instance, and mixing with the code for the MSIX table)?

I don't think it ever worked. And to be fair, no known guest ever reads from it either. It just that as I was reworking it, some of the pitfalls became obvious.

Quoted 9 lines

virtio/pci.c static void virtio_pci__msix_mmio_callback(struct kvm_cpu *vcpu, · line 350

Quoted 4 lines
virtio/pci.c +3 -0
+	BUILD_BUG_ON(VIRTIO_NR_MSIX > (sizeof(vpci->msix_pba) * 8));
+
+	pba_offset = vpci->pci_hdr.msix.pba_offset & ~PCI_MSIX_TABLE_BIR;

Any particular reason you read back the offset from the MSIX capability instead of just using VIRTIO_MSIX_TABLE_SIZE here? Is that to avoid accidentally diverging in the future, by having just one place of definition?

Exactly. My first version of this patch actually failed to update the offset advertised to the guest, so I decided to just have a single location for this. At least, we won't have to touch this code again if we change the number of MSI-X.

Quoted 10 lines
Quoted 10 lines
virtio/pci.c +2 -5
+	if (addr >= msix_io_addr + pba_offset) {
+		/* Read access to PBA */
 		if (is_write)
 			return;
-		table  = (struct msix_table *)&vpci->msix_pba;
-		offset = addr - (msix_io_addr + PCI_IO_SIZE);
-	} else {
-		table  = vpci->msix_table;
-		offset = addr - msix_io_addr;
Quoted 8 lines

virtio/pci.c static void virtio_pci__msix_mmio_callback(struct kvm_cpu *vcpu, · line 358

Quoted 4 lines
virtio/pci.c +4 -0
+		offset = addr - (msix_io_addr + pba_offset);
+		if ((offset + len) > sizeof (vpci->msix_pba))
+			return;
+		memcpy(data, (void *)&vpci->msix_pba + offset, len);

Should this be a char* cast, since pointer arithmetic on void* is somewhat frowned upon (aka "forbidden in the C standard, but allowed as a GCC extension")?

I am trying to be consistent. A quick grep shows at least 19 occurrences of pointer arithmetic with '(void *)', and none with '(char *)'. Happy for someone to go and repaint this, but I don't think this should be the purpose of this patch.

Thanks,

	M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
Reviewed-by
#3 lore raw
Quoted 28 lines · On Tue, 31 Aug 2021 12:28:28 +0100 Marc Zyngier <[email protected]> wrote:

Hi Andre,

Quoted 24 lines · Andre Przywara

On Fri, 27 Aug 2021 12:54:05 +0100
Marc Zyngier <[email protected]> wrote:

Hi Marc,

Quoted 8 lines

Since 45d3b59e8c45 ("kvm tools: Increase amount of possible interrupts per PCI device"), the number of MSI-S has gone from 4 to 33.

However, the corresponding storage hasn't been upgraded, and writing to the MSI-X table is a pretty risky business. Now that the Linux kernel writes to *all* MSI-X entries before doing anything else with the device, kvmtool dies a horrible death.

Quoted 7 lines

Fix it by properly defining the size of the MSI-X bar, and make Linux great again.

This includes some fixes the PBA region decoding, as well as minor cleanups to make this code a bit more maintainable.

Many thanks for fixing this, it looks good to me now. Just some questions below:

Thanks for the explanation, and keeping (void *) as there are more instances sounds fair enough. So:

Cheers,
Andre

Quoted 93 lines
Quoted 39 lines
Quoted 39 lines
  
---
 virtio/pci.c | 42 ++++++++++++++++++++++++++++++------------
 1 file changed, 30 insertions(+), 12 deletions(-)
virtio/pci.c +9 -0
index eb91f512..41085291 100644
@@ -7,6 +7,7 @@
 #include "kvm/irq.h"
 #include "kvm/virtio.h"
 #include "kvm/ioeventfd.h"
+#include "kvm/util.h"
 
 #include <sys/ioctl.h>
 #include <linux/virtio_pci.h>
@@ -14,6 +15,13 @@
 #include <assert.h>
 #include <string.h>
 
+#define ALIGN_UP(x, s)		ALIGN((x) + (s) - 1, (s))
+#define VIRTIO_NR_MSIX		(VIRTIO_PCI_MAX_VQ + VIRTIO_PCI_MAX_CONFIG)
+#define VIRTIO_MSIX_TABLE_SIZE	(VIRTIO_NR_MSIX * 16)
+#define VIRTIO_MSIX_PBA_SIZE	(ALIGN_UP(VIRTIO_MSIX_TABLE_SIZE, 64) / 8)
+#define VIRTIO_MSIX_BAR_SIZE	(1UL << fls_long(VIRTIO_MSIX_TABLE_SIZE + \
+						 VIRTIO_MSIX_PBA_SIZE))
+
 static u16 virtio_pci__port_addr(struct virtio_pci *vpci)
 {
 	return pci__bar_address(&vpci->pci_hdr, 0);
@@ -333,18 +341,27 @@ static void virtio_pci__msix_mmio_callback(struct kvm_cpu *vcpu,
 	struct virtio_pci *vpci = vdev->virtio;
 	struct msix_table *table;
 	u32 msix_io_addr = virtio_pci__msix_io_addr(vpci);
+	u32 pba_offset;
 	int vecnum;
 	size_t offset;
 
Quoted 6 lines

virtio/pci.c static void virtio_pci__msix_mmio_callback(struct kvm_cpu *vcpu, · line 339

Quoted 1 line
virtio/pci.c +0 -1
-	if (addr > msix_io_addr + PCI_IO_SIZE) {  

Ouch, the missing "=" looks like another long standing bug you fixed, I wonder how this ever worked before? Looking deeper it looks like the whole PBA code was quite broken (allowing writes, for instance, and mixing with the code for the MSIX table)?

I don't think it ever worked. And to be fair, no known guest ever reads from it either. It just that as I was reworking it, some of the pitfalls became obvious.

Quoted 9 lines

virtio/pci.c static void virtio_pci__msix_mmio_callback(struct kvm_cpu *vcpu, · line 350

Quoted 4 lines
virtio/pci.c +3 -0
+	BUILD_BUG_ON(VIRTIO_NR_MSIX > (sizeof(vpci->msix_pba) * 8));
+
+	pba_offset = vpci->pci_hdr.msix.pba_offset & ~PCI_MSIX_TABLE_BIR;  

Any particular reason you read back the offset from the MSIX capability instead of just using VIRTIO_MSIX_TABLE_SIZE here? Is that to avoid accidentally diverging in the future, by having just one place of definition?

Exactly. My first version of this patch actually failed to update the offset advertised to the guest, so I decided to just have a single location for this. At least, we won't have to touch this code again if we change the number of MSI-X.

Quoted 10 lines
Quoted 10 lines
virtio/pci.c +2 -5
+	if (addr >= msix_io_addr + pba_offset) {
+		/* Read access to PBA */
 		if (is_write)
 			return;
-		table  = (struct msix_table *)&vpci->msix_pba;
-		offset = addr - (msix_io_addr + PCI_IO_SIZE);
-	} else {
-		table  = vpci->msix_table;
-		offset = addr - msix_io_addr;
Quoted 8 lines

virtio/pci.c static void virtio_pci__msix_mmio_callback(struct kvm_cpu *vcpu, · line 358

Quoted 4 lines
virtio/pci.c +4 -0
+		offset = addr - (msix_io_addr + pba_offset);
+		if ((offset + len) > sizeof (vpci->msix_pba))
+			return;
+		memcpy(data, (void *)&vpci->msix_pba + offset, len);  

Should this be a char* cast, since pointer arithmetic on void* is somewhat frowned upon (aka "forbidden in the C standard, but allowed as a GCC extension")?

I am trying to be consistent. A quick grep shows at least 19 occurrences of pointer arithmetic with '(void *)', and none with '(char *)'. Happy for someone to go and repaint this, but I don't think this should be the purpose of this patch.

Thanks,

	M.
Applied
#4 lore raw
In reply to Marc Zyngier
Quoted 9 lines · Marc Zyngier

Since 45d3b59e8c45 ("kvm tools: Increase amount of possible interrupts per PCI device"), the number of MSI-S has gone from 4 to 33.

However, the corresponding storage hasn't been upgraded, and writing to the MSI-X table is a pretty risky business. Now that the Linux kernel writes to *all* MSI-X entries before doing anything else with the device, kvmtool dies a horrible death.

[...]

Applied to kvmtool (master), thanks!

[1/1] virtio/pci: Size the MSI-X bar according to the number of MSI-X

      https://git.kernel.org/will/kvmtool/c/2e7380db438d

Cheers,

Signature · 5 lines
Will

https://fixes.arm64.dev
https://next.arm64.dev
https://will.arm64.dev