Skip to contentSkip to conversation

Add p2p via dmabuf to habanalabs

PATCH Superseded Oded Gabbay 3 participants 24 messages Sep 12, 2021 – Oct 1, 2021

Subsystems (3)

v6 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

v6 cover Add p2p via dmabuf to habanalabs

Hi,
Re-sending this patch-set following the release of our user-space TPC compiler and runtime library.

I would appreciate a review on this.

Thanks,
Oded

Oded Gabbay (1):
habanalabs: define uAPI to export FD for DMA-BUF

Tomer Tayar (1):
habanalabs: add support for dma-buf exporter

 drivers/misc/habanalabs/Kconfig             |   1 +
 drivers/misc/habanalabs/common/habanalabs.h |  22 +
 drivers/misc/habanalabs/common/memory.c     | 522 +++++++++++++++++++-
 drivers/misc/habanalabs/gaudi/gaudi.c       |   1 +
 drivers/misc/habanalabs/goya/goya.c         |   1 +
 include/uapi/misc/habanalabs.h              |  28 +-
 6 files changed, 570 insertions(+), 5 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH v6 1/2 habanalabs: define uAPI to export FD for DMA-BUF

User process might want to share the device memory with another driver/device, and to allow it to access it over PCIe (P2P).

To enable this, we utilize the dma-buf mechanism and add a dma-buf exporter support, so the other driver can import the device memory and access it.

The device memory is allocated using our existing allocation uAPI, where the user will get a handle that represents the allocation.

The user will then need to call the new
uAPI (HL_MEM_OP_EXPORT_DMABUF_FD) and give the handle as a parameter.

The driver will return a FD that represents the DMA-BUF object that was created to match that allocation.

---
 include/uapi/misc/habanalabs.h | 28 +++++++++++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)
include/uapi/misc/habanalabs.h +27 -1
index 042e96f99d85..b1def68bf5d3 100644
@@ -960,6 +960,10 @@ union hl_wait_cs_args {
 #define HL_MEM_OP_UNMAP			3
 /* Opcode to map a hw block */
 #define HL_MEM_OP_MAP_BLOCK		4
+/* Opcode to create DMA-BUF object for an existing device memory allocation
+ * and to export an FD of that DMA-BUF back to the caller
+ */
+#define HL_MEM_OP_EXPORT_DMABUF_FD	5
 
 /* Memory flags */
 #define HL_MEM_CONTIGUOUS	0x1
@@ -1031,11 +1035,26 @@ struct hl_mem_in {
 			/* Virtual address returned from HL_MEM_OP_MAP */
 			__u64 device_virt_addr;
 		} unmap;
+
+		/* HL_MEM_OP_EXPORT_DMABUF_FD */
+		struct {
+			/* Handle returned from HL_MEM_OP_ALLOC. In Gaudi,
+			 * where we don't have MMU for the device memory, the
+			 * driver expects a physical address (instead of
+			 * a handle) in the device memory space.
+			 */
+			__u64 handle;
+			/* Size of memory allocation. Relevant only for GAUDI */
+			__u64 mem_size;
+		} export_dmabuf_fd;
 	};
 
 	/* HL_MEM_OP_* */
 	__u32 op;
-	/* HL_MEM_* flags */
+	/* HL_MEM_* flags.
+	 * For the HL_MEM_OP_EXPORT_DMABUF_FD opcode, this field holds the
+	 * DMA-BUF file/FD flags.
+	 */
 	__u32 flags;
 	/* Context ID - Currently not in use */
 	__u32 ctx_id;
@@ -1072,6 +1091,13 @@ struct hl_mem_out {
 
 			__u32 pad;
 		};
+
+		/* Returned in HL_MEM_OP_EXPORT_DMABUF_FD. Represents the
+		 * DMA-BUF object that was created to describe a memory
+		 * allocation on the device's memory space. The FD should be
+		 * passed to the importer driver
+		 */
+		__u64 fd;
 	};
 };
 
Signature · 1 line
2.17.1
#4 lore raw

PATCH v6 2/2 habanalabs: add support for dma-buf exporter

In reply to Oded Gabbay

From: Tomer Tayar <[email protected]>

Implement the calls to the dma-buf kernel api to create a dma-buf object backed by FD.

We block the option to mmap the DMA-BUF object because we don't support DIRECT_IO and implicit P2P. We only implement support for explicit P2P through importing the FD of the DMA-BUF.

In the export phase, we provide to the DMA-BUF object an array of pages that represent the device's memory area. During the map callback, we convert the array of pages into an SGT. We split/merge the pages according to the dma max segment size of the importer.

To get the DMA address of the PCI bar, we use the dma_map_resources() kernel API, because our device memory is not backed by page struct and this API doesn't need page struct to map the physical address to a DMA address.

We set the orig_nents member of the SGT to be 0, to indicate to other drivers that we don't support CPU mappings.

Note that in Habanalabs's ASICs, the device memory is pinned and immutable. Therefore, there is no need for dynamic mappings and pinning callbacks.

Also note that in GAUDI we don't have an MMU towards the device memory and the user works on physical addresses. Therefore, the user doesn't pass through the kernel driver to allocate memory there. As a result, only for GAUDI we receive from the user a device memory physical address (instead of a handle) and a size.

We check the p2p distance using pci_p2pdma_distance_many() and refusing to map dmabuf in case the distance doesn't allow p2p.

---
 drivers/misc/habanalabs/Kconfig             |   1 +
 drivers/misc/habanalabs/common/habanalabs.h |  22 +
 drivers/misc/habanalabs/common/memory.c     | 522 +++++++++++++++++++-
 drivers/misc/habanalabs/gaudi/gaudi.c       |   1 +
 drivers/misc/habanalabs/goya/goya.c         |   1 +
 5 files changed, 543 insertions(+), 4 deletions(-)
drivers/misc/habanalabs/Kconfig +1 -0
index 293d79811372..c82d2e7b2035 100644
@@ -8,6 +8,7 @@ config HABANA_AI
 	depends on PCI && HAS_IOMEM
 	select GENERIC_ALLOCATOR
 	select HWMON
+	select DMA_SHARED_BUFFER
 	help
 	  Enables PCIe card driver for Habana's AI Processors (AIP) that are
 	  designed to accelerate Deep Learning inference and training workloads.
drivers/misc/habanalabs/common/habanalabs.h +22 -0
index bebebcb163ee..df49376a0880 100644
@@ -26,6 +26,7 @@
 #include <linux/sched/signal.h>
 #include <linux/io-64-nonatomic-lo-hi.h>
 #include <linux/coresight.h>
+#include <linux/dma-buf.h>
 
 #define HL_NAME				"habanalabs"
 
@@ -1352,6 +1353,23 @@ struct hl_cs_counters_atomic {
 	atomic64_t validation_drop_cnt;
 };
 
+/**
+ * struct hl_dmabuf_wrapper - a dma-buf wrapper object.
+ * @dmabuf: pointer to dma-buf object.
+ * @ctx: pointer to the dma-buf owner's context.
+ * @phys_pg_pack: pointer to physical page pack if the dma-buf was exported for
+ *                memory allocation handle.
+ * @device_address: physical address of the device's memory. Relevant only
+ *                  if phys_pg_pack is NULL (dma-buf was exported from address).
+ *                  The total size can be taken from the dmabuf object.
+ */
+struct hl_dmabuf_wrapper {
+	struct dma_buf			*dmabuf;
+	struct hl_ctx			*ctx;
+	struct hl_vm_phys_pg_pack	*phys_pg_pack;
+	uint64_t			device_address;
+};
+
 /**
  * struct hl_ctx - user/kernel context.
  * @mem_hash: holds mapping from virtual address to virtual memory area
@@ -1662,6 +1680,7 @@ struct hl_vm_hw_block_list_node {
  * @npages: num physical pages in the pack.
  * @total_size: total size of all the pages in this list.
  * @mapping_cnt: number of shared mappings.
+ * @exporting_cnt: number of dma-buf exporting.
  * @asid: the context related to this list.
  * @page_size: size of each page in the pack.
  * @flags: HL_MEM_* flags related to this list.
@@ -1676,6 +1695,7 @@ struct hl_vm_phys_pg_pack {
 	u64			npages;
 	u64			total_size;
 	atomic_t		mapping_cnt;
+	u32			exporting_cnt;
 	u32			asid;
 	u32			page_size;
 	u32			flags;
@@ -2396,6 +2416,7 @@ struct multi_cs_data {
  *                          the error will be ignored by the driver during
  *                          device initialization. Mainly used to debug and
  *                          workaround firmware bugs
+ * @dram_pci_bar_start: start bus address of PCIe bar towards DRAM.
  * @last_successful_open_jif: timestamp (jiffies) of the last successful
  *                            device open.
  * @last_open_session_duration_jif: duration (jiffies) of the last device open
@@ -2537,6 +2558,7 @@ struct hl_device {
 	u64				max_power;
 	u64				clock_gating_mask;
 	u64				boot_error_status_mask;
+	u64				dram_pci_bar_start;
 	u64				last_successful_open_jif;
 	u64				last_open_session_duration_jif;
 	u64				open_counter;
drivers/misc/habanalabs/common/memory.c +518 -4

574 lines not on this page · raw message

drivers/misc/habanalabs/gaudi/gaudi.c +1 -0
index 383865be3c2c..48cea845624e 100644
@@ -795,6 +795,7 @@ static int gaudi_early_init(struct hl_device *hdev)
 	}
 
 	prop->dram_pci_bar_size = pci_resource_len(pdev, HBM_BAR_ID);
+	hdev->dram_pci_bar_start = pci_resource_start(pdev, HBM_BAR_ID);
 
 	/* If FW security is enabled at this point it means no access to ELBI */
 	if (hdev->asic_prop.fw_security_enabled) {
drivers/misc/habanalabs/goya/goya.c +1 -0
index 031c1849da14..65e4a4bb9323 100644
@@ -622,6 +622,7 @@ static int goya_early_init(struct hl_device *hdev)
 	}
 
 	prop->dram_pci_bar_size = pci_resource_len(pdev, DDR_BAR_ID);
+	hdev->dram_pci_bar_start = pci_resource_start(pdev, DDR_BAR_ID);
 
 	/* If FW security is enabled at this point it means no access to ELBI */
 	if (hdev->asic_prop.fw_security_enabled) {
Signature · 1 line
2.17.1
#10 lore raw
In reply to Oded Gabbay
Quoted 5 lines · Oded Gabbay

Hi,
Re-sending this patch-set following the release of our user-space TPC compiler and runtime library.

I would appreciate a review on this.

I think the big open we have is the entire revoke discussions. Having the option to let dma-buf hang around which map to random local memory ranges, without clear ownership link and a way to kill it sounds bad to me.

I think there's a few options:
- We require revoke support. But I've heard rdma really doesn't like that, I guess because taking out an MR while holding the dma_resv_lock would be an inversion, so can't be done. Jason, can you recap what exactly the hold-up was again that makes this a no-go?

- The other option I discussed is a bit more the exlusive device ownership model we've had for gpus in drm of the really old kind. Roughly this would work like this, in terms of drm_device:
- Only the current owner (drm_master in current drm code, but should probably rename that to drm_owner) is allowed to use the accel driver. So all ioctl would fail if you're not drm_master.
- On dropmaster/file close we'd revoke as much as possible, e.g. in-flight commands, mmaps, anything really that can be revoked.
- For non-revokable things like these dma-buf we'd keep a drm_master reference around. This would prevent the next open to acquire ownership rights, which at least prevents all the nasty potential problems.
- admin (or well container orchestrator) then has responsibility to shoot down all process until the problem goes away (i.e. until you hit the one with the rdma MR which keeps the dma-buf alive)

- Not sure there's another reasonable way to do this without inviting some problems once we get outside of the "single kernel instance per tenant" use-case.

Wrt implementation there's the trouble of this reinventing a bunch of drm stuff and concepts, but that's maybe for after we've figured out semantics.

Also would be great if you have a pull request for the userspace runtime that shows a bit how this all gets used and tied together. Or maybe some pointers, since I guess retconning a PR in github is maybe a bit much.

Cheers, Daniel

Quoted 21 lines

Thanks,
Oded

Oded Gabbay (1):
habanalabs: define uAPI to export FD for DMA-BUF

Tomer Tayar (1):
habanalabs: add support for dma-buf exporter

 drivers/misc/habanalabs/Kconfig             |   1 +
 drivers/misc/habanalabs/common/habanalabs.h |  22 +
 drivers/misc/habanalabs/common/memory.c     | 522 +++++++++++++++++++-
 drivers/misc/habanalabs/gaudi/gaudi.c       |   1 +
 drivers/misc/habanalabs/goya/goya.c         |   1 +
 include/uapi/misc/habanalabs.h              |  28 +-
 6 files changed, 570 insertions(+), 5 deletions(-)
Signature · 1 line
2.17.1
Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
#11 lore raw
Quoted 6 lines · Daniel Vetter
Quoted 4 lines · Oded Gabbay

Hi,
Re-sending this patch-set following the release of our user-space TPC compiler and runtime library.

Quoted 6 lines
Quoted 1 line

I would appreciate a review on this.

I think the big open we have is the entire revoke discussions. Having the option to let dma-buf hang around which map to random local memory ranges, without clear ownership link and a way to kill it sounds bad to me.

Hi Daniel, thanks for the reply.

What is this revocation requirement ?
Is it relevant to my case, where our device has a single user at a time (only a single process can open the device character file) and that user has ownership of the entire device local memory ?

Because I don't care if the user has this dma-buf object lying around, as it only wastes device memory for that user. And the user can't close the fd of the device until it has closed the fd of the dmabuf.

Or is the revocation referring to something else entirely ?

Quoted 26 lines

I think there's a few options:
- We require revoke support. But I've heard rdma really doesn't like that, I guess because taking out an MR while holding the dma_resv_lock would be an inversion, so can't be done. Jason, can you recap what exactly the hold-up was again that makes this a no-go?

- The other option I discussed is a bit more the exlusive device ownership model we've had for gpus in drm of the really old kind. Roughly this would work like this, in terms of drm_device:
- Only the current owner (drm_master in current drm code, but should probably rename that to drm_owner) is allowed to use the accel driver. So all ioctl would fail if you're not drm_master.
- On dropmaster/file close we'd revoke as much as possible, e.g. in-flight commands, mmaps, anything really that can be revoked.
- For non-revokable things like these dma-buf we'd keep a drm_master reference around. This would prevent the next open to acquire ownership rights, which at least prevents all the nasty potential problems.
- admin (or well container orchestrator) then has responsibility to shoot down all process until the problem goes away (i.e. until you hit the one with the rdma MR which keeps the dma-buf alive)

- Not sure there's another reasonable way to do this without inviting some problems once we get outside of the "single kernel instance per tenant" use-case.

Quoted 7 lines

Wrt implementation there's the trouble of this reinventing a bunch of drm stuff and concepts, but that's maybe for after we've figured out semantics.

Also would be great if you have a pull request for the userspace runtime that shows a bit how this all gets used and tied together. Or maybe some pointers, since I guess retconning a PR in github is maybe a bit much.

hmm.. so actually this has only an API in the hl-thunk library. I have not put it in github but I can do it fairly quickly.
But the callee of this API is not the userspace runtime. The callee is another library which is responsible for doing scale-out of training outside of a box of gaudi devices. That library implements collective operations (e.g. all gather, all reduce) over multiple gaudi devices. And in fact, the real user is the training framework (e.g. tensorflow, pytorch) that calls these collective operations. The framework then passes the dmabuf fd to libfabric (open source project) which uses rdma-core to pass it to the rdma driver.

I can give you a short presentation on that if you want :)

Quoted 29 lines

Cheers, Daniel

Quoted 18 lines

Thanks,
Oded

Oded Gabbay (1):
habanalabs: define uAPI to export FD for DMA-BUF

Tomer Tayar (1):
habanalabs: add support for dma-buf exporter

 drivers/misc/habanalabs/Kconfig             |   1 +
 drivers/misc/habanalabs/common/habanalabs.h |  22 +
 drivers/misc/habanalabs/common/memory.c     | 522 +++++++++++++++++++-
 drivers/misc/habanalabs/gaudi/gaudi.c       |   1 +
 drivers/misc/habanalabs/goya/goya.c         |   1 +
 include/uapi/misc/habanalabs.h              |  28 +-
 6 files changed, 570 insertions(+), 5 deletions(-)
Quoted 3 lines

--
2.17.1

--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

#12 lore raw
In reply to Daniel Vetter
Quoted 11 lines · Daniel Vetter
Quoted 5 lines · Oded Gabbay

Hi,
Re-sending this patch-set following the release of our user-space TPC compiler and runtime library.

I would appreciate a review on this.

I think the big open we have is the entire revoke discussions. Having the option to let dma-buf hang around which map to random local memory ranges, without clear ownership link and a way to kill it sounds bad to me.

Quoted 5 lines

I think there's a few options:
- We require revoke support. But I've heard rdma really doesn't like that, I guess because taking out an MR while holding the dma_resv_lock would be an inversion, so can't be done. Jason, can you recap what exactly the hold-up was again that makes this a no-go?

RDMA HW can't do revoke.

So we have to exclude almost all the HW and several interesting use cases to enable a revoke operation.

Quoted 4 lines

- For non-revokable things like these dma-buf we'd keep a drm_master reference around. This would prevent the next open to acquire ownership rights, which at least prevents all the nasty potential problems.

This is what I generally would expect, the DMABUF FD and its DMA memory just floats about until the unrevokable user releases it, which happens when the FD that is driving the import eventually gets closed.

I still don't think any of the complexity is needed, pinnable memory is a thing in Linux, just account for it in mlocked and that is enough.

Jason

#13 lore raw
Quoted 24 lines · Jason Gunthorpe
Quoted 11 lines · Daniel Vetter
Quoted 5 lines · Oded Gabbay

Hi,
Re-sending this patch-set following the release of our user-space TPC compiler and runtime library.

I would appreciate a review on this.

I think the big open we have is the entire revoke discussions. Having the option to let dma-buf hang around which map to random local memory ranges, without clear ownership link and a way to kill it sounds bad to me.

Quoted 5 lines

I think there's a few options:
- We require revoke support. But I've heard rdma really doesn't like that, I guess because taking out an MR while holding the dma_resv_lock would be an inversion, so can't be done. Jason, can you recap what exactly the hold-up was again that makes this a no-go?

RDMA HW can't do revoke.

So we have to exclude almost all the HW and several interesting use cases to enable a revoke operation.

Quoted 8 lines
Quoted 4 lines

- For non-revokable things like these dma-buf we'd keep a drm_master reference around. This would prevent the next open to acquire ownership rights, which at least prevents all the nasty potential problems.

This is what I generally would expect, the DMABUF FD and its DMA memory just floats about until the unrevokable user releases it, which happens when the FD that is driving the import eventually gets closed.

This is exactly what we are doing in the driver. We make sure everything is valid until the unrevokable user releases it and that happens only when the dmabuf fd gets closed.
And the user can't close it's fd of the device until he performs the above, so there is no leakage between users.

Quoted 6 lines

I still don't think any of the complexity is needed, pinnable memory is a thing in Linux, just account for it in mlocked and that is enough.

Jason

#14 lore raw
Quoted 14 lines · Oded Gabbay
Quoted 13 lines · Jason Gunthorpe
Quoted 11 lines · Daniel Vetter
Quoted 5 lines · Oded Gabbay

Hi,
Re-sending this patch-set following the release of our user-space TPC compiler and runtime library.

I would appreciate a review on this.

I think the big open we have is the entire revoke discussions. Having the option to let dma-buf hang around which map to random local memory ranges, without clear ownership link and a way to kill it sounds bad to me.

Quoted 7 lines
Quoted 7 lines
Quoted 5 lines

I think there's a few options:
- We require revoke support. But I've heard rdma really doesn't like that, I guess because taking out an MR while holding the dma_resv_lock would be an inversion, so can't be done. Jason, can you recap what exactly the hold-up was again that makes this a no-go?

RDMA HW can't do revoke.

Like why? I'm assuming when the final open handle or whatever for that MR is closed, you do clean up everything? Or does that MR still stick around forever too?

Quoted 8 lines
Quoted 8 lines

So we have to exclude almost all the HW and several interesting use cases to enable a revoke operation.

Quoted 4 lines

- For non-revokable things like these dma-buf we'd keep a drm_master reference around. This would prevent the next open to acquire ownership rights, which at least prevents all the nasty potential problems.

Quoted 8 lines
Quoted 3 lines

This is what I generally would expect, the DMABUF FD and its DMA memory just floats about until the unrevokable user releases it, which happens when the FD that is driving the import eventually gets closed.

This is exactly what we are doing in the driver. We make sure everything is valid until the unrevokable user releases it and that happens only when the dmabuf fd gets closed.
And the user can't close it's fd of the device until he performs the above, so there is no leakage between users.

Maybe I got the device security model all wrong, but I thought Guadi is single user, and the only thing it protects is the system against the Gaudi device trhough iommu/device gart. So roughly the following can happen:

1. User A opens gaudi device, sets up dma-buf export

2. User A registers that with RDMA, or anything else that doesn't support revoke.

3. User A closes gaudi device

4. User B opens gaudi device, assumes that it has full control over the device and uploads some secrets, which happen to end up in the dma-buf region user A set up

5. User B extracts secrets.

Quoted 3 lines
Quoted 3 lines

I still don't think any of the complexity is needed, pinnable memory is a thing in Linux, just account for it in mlocked and that is enough.

It's not mlocked memory, it's mlocked memory and I can exfiltrate it. Mlock is fine, exfiltration not so much. It's mlock, but a global pool and if you didn't munlock then the next mlock from a completely different user will alias with your stuff.

Or is there something that prevents that? Oded at least explain that gaudi works like a gpu from 20 years ago, single user, no security at all within the device.
-Daniel

Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
#15 lore raw
Quoted 50 lines · Daniel Vetter
Quoted 14 lines · Oded Gabbay
Quoted 13 lines · Jason Gunthorpe
Quoted 11 lines · Daniel Vetter
Quoted 5 lines · Oded Gabbay

Hi,
Re-sending this patch-set following the release of our user-space TPC compiler and runtime library.

I would appreciate a review on this.

I think the big open we have is the entire revoke discussions. Having the option to let dma-buf hang around which map to random local memory ranges, without clear ownership link and a way to kill it sounds bad to me.

Quoted 7 lines
Quoted 7 lines
Quoted 5 lines

I think there's a few options:
- We require revoke support. But I've heard rdma really doesn't like that, I guess because taking out an MR while holding the dma_resv_lock would be an inversion, so can't be done. Jason, can you recap what exactly the hold-up was again that makes this a no-go?

RDMA HW can't do revoke.

Like why? I'm assuming when the final open handle or whatever for that MR is closed, you do clean up everything? Or does that MR still stick around forever too?

Quoted 8 lines
Quoted 8 lines

So we have to exclude almost all the HW and several interesting use cases to enable a revoke operation.

Quoted 4 lines

- For non-revokable things like these dma-buf we'd keep a drm_master reference around. This would prevent the next open to acquire ownership rights, which at least prevents all the nasty potential problems.

Quoted 8 lines
Quoted 3 lines

This is what I generally would expect, the DMABUF FD and its DMA memory just floats about until the unrevokable user releases it, which happens when the FD that is driving the import eventually gets closed.

This is exactly what we are doing in the driver. We make sure everything is valid until the unrevokable user releases it and that happens only when the dmabuf fd gets closed.
And the user can't close it's fd of the device until he performs the above, so there is no leakage between users.

Maybe I got the device security model all wrong, but I thought Guadi is single user, and the only thing it protects is the system against the Gaudi device trhough iommu/device gart. So roughly the following can happen:

Quoted 6 lines

1. User A opens gaudi device, sets up dma-buf export

2. User A registers that with RDMA, or anything else that doesn't support revoke.

3. User A closes gaudi device

This can not happen without User A closing the FD of the dma-buf it exported. We prevent User A from closing the device because when it exported the dma-buf, the driver's code took a refcnt of the user's private structure. You can see that in export_dmabuf_common() in the 2nd patch. There is a call there to hl_ctx_get.
So even if User A calls close(device_fd), the driver won't let any other user open the device until User A closes the fd of the dma-buf object.

Moreover, once User A will close the dma-buf fd and the device is released, the driver will scrub the device memory (this is optional for systems who care about security).

And AFAIK, User A can't close the dma-buf fd once it registered it with RDMA, without doing unregister.
This can be seen in ib_umem_dmabuf_get() which calls dma_buf_get() which does fget(fd)

Quoted 24 lines

4. User B opens gaudi device, assumes that it has full control over the device and uploads some secrets, which happen to end up in the dma-buf region user A set up

5. User B extracts secrets.

Quoted 3 lines
Quoted 3 lines

I still don't think any of the complexity is needed, pinnable memory is a thing in Linux, just account for it in mlocked and that is enough.

It's not mlocked memory, it's mlocked memory and I can exfiltrate it. Mlock is fine, exfiltration not so much. It's mlock, but a global pool and if you didn't munlock then the next mlock from a completely different user will alias with your stuff.

Or is there something that prevents that? Oded at least explain that gaudi works like a gpu from 20 years ago, single user, no security at all within the device.
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

#18 lore raw
In reply to Daniel Vetter
Quoted 21 lines · Daniel Vetter
Quoted 20 lines · Oded Gabbay
Quoted 19 lines · Jason Gunthorpe
Quoted 16 lines · Daniel Vetter
Quoted 5 lines · Oded Gabbay

Hi,
Re-sending this patch-set following the release of our user-space TPC compiler and runtime library.

I would appreciate a review on this.

I think the big open we have is the entire revoke discussions. Having the option to let dma-buf hang around which map to random local memory ranges, without clear ownership link and a way to kill it sounds bad to me.

I think there's a few options:
- We require revoke support. But I've heard rdma really doesn't like that, I guess because taking out an MR while holding the dma_resv_lock would be an inversion, so can't be done. Jason, can you recap what exactly the hold-up was again that makes this a no-go?

Quoted 5 lines
Quoted 1 line
Quoted 1 line

RDMA HW can't do revoke.

Like why? I'm assuming when the final open handle or whatever for that MR is closed, you do clean up everything? Or does that MR still stick around forever too?

It is a combination of uAPI and HW specification.

revoke here means you take a MR object and tell it to stop doing DMA without causing the MR object to be destructed.

All the drivers can of course destruct the MR, but doing such a destruction without explicit synchronization with user space opens things up to a serious use-after potential that could be a security issue.

When the open handle closes the userspace is synchronized with the kernel and we can destruct the HW objects safely.

So, the special HW feature required is 'stop doing DMA but keep the object in an error state' which isn't really implemented, and doesn't extend very well to other object types beyond simple MRs.

Quoted 10 lines

1. User A opens gaudi device, sets up dma-buf export

2. User A registers that with RDMA, or anything else that doesn't support revoke.

3. User A closes gaudi device

4. User B opens gaudi device, assumes that it has full control over the device and uploads some secrets, which happen to end up in the dma-buf region user A set up

I would expect this is blocked so long as the DMABUF exists - eg the DMABUF will hold a fget on the FD of #1 until the DMABUF is closed, so that #3 can't actually happen.

Quoted 2 lines

It's not mlocked memory, it's mlocked memory and I can exfiltrate it.

That's just bug, don't make buggy drivers :)

Jason

#16 lore raw
In reply to Oded Gabbay
Quoted 23 lines · Oded Gabbay
Quoted 6 lines · Daniel Vetter

Maybe I got the device security model all wrong, but I thought Guadi is single user, and the only thing it protects is the system against the Gaudi device trhough iommu/device gart. So roughly the following can happen:

Quoted 6 lines

1. User A opens gaudi device, sets up dma-buf export

2. User A registers that with RDMA, or anything else that doesn't support revoke.

3. User A closes gaudi device

This can not happen without User A closing the FD of the dma-buf it exported. We prevent User A from closing the device because when it exported the dma-buf, the driver's code took a refcnt of the user's private structure. You can see that in export_dmabuf_common() in the 2nd patch. There is a call there to hl_ctx_get.
So even if User A calls close(device_fd), the driver won't let any other user open the device until User A closes the fd of the dma-buf object.

Quoted 8 lines

Moreover, once User A will close the dma-buf fd and the device is released, the driver will scrub the device memory (this is optional for systems who care about security).

And AFAIK, User A can't close the dma-buf fd once it registered it with RDMA, without doing unregister.
This can be seen in ib_umem_dmabuf_get() which calls dma_buf_get() which does fget(fd)

Adding Daniel, I don't know how his email got dropped when I replied to him...

#17 lore raw
In reply to Oded Gabbay
Quoted 66 lines · Oded Gabbay
Quoted 50 lines · Daniel Vetter
Quoted 14 lines · Oded Gabbay
Quoted 13 lines · Jason Gunthorpe
Quoted 11 lines · Daniel Vetter
Quoted 5 lines · Oded Gabbay

Hi,
Re-sending this patch-set following the release of our user-space TPC compiler and runtime library.

I would appreciate a review on this.

I think the big open we have is the entire revoke discussions. Having the option to let dma-buf hang around which map to random local memory ranges, without clear ownership link and a way to kill it sounds bad to me.

Quoted 7 lines
Quoted 7 lines
Quoted 5 lines

I think there's a few options:
- We require revoke support. But I've heard rdma really doesn't like that, I guess because taking out an MR while holding the dma_resv_lock would be an inversion, so can't be done. Jason, can you recap what exactly the hold-up was again that makes this a no-go?

RDMA HW can't do revoke.

Like why? I'm assuming when the final open handle or whatever for that MR is closed, you do clean up everything? Or does that MR still stick around forever too?

Quoted 8 lines
Quoted 8 lines

So we have to exclude almost all the HW and several interesting use cases to enable a revoke operation.

Quoted 4 lines

- For non-revokable things like these dma-buf we'd keep a drm_master reference around. This would prevent the next open to acquire ownership rights, which at least prevents all the nasty potential problems.

Quoted 8 lines
Quoted 3 lines

This is what I generally would expect, the DMABUF FD and its DMA memory just floats about until the unrevokable user releases it, which happens when the FD that is driving the import eventually gets closed.

This is exactly what we are doing in the driver. We make sure everything is valid until the unrevokable user releases it and that happens only when the dmabuf fd gets closed.
And the user can't close it's fd of the device until he performs the above, so there is no leakage between users.

Maybe I got the device security model all wrong, but I thought Guadi is single user, and the only thing it protects is the system against the Gaudi device trhough iommu/device gart. So roughly the following can happen:

Quoted 6 lines

1. User A opens gaudi device, sets up dma-buf export

2. User A registers that with RDMA, or anything else that doesn't support revoke.

3. User A closes gaudi device

This can not happen without User A closing the FD of the dma-buf it exported. We prevent User A from closing the device because when it exported the dma-buf, the driver's code took a refcnt of the user's private structure. You can see that in export_dmabuf_common() in the 2nd patch. There is a call there to hl_ctx_get.
So even if User A calls close(device_fd), the driver won't let any other user open the device until User A closes the fd of the dma-buf object.

Quoted 8 lines

Moreover, once User A will close the dma-buf fd and the device is released, the driver will scrub the device memory (this is optional for systems who care about security).

And AFAIK, User A can't close the dma-buf fd once it registered it with RDMA, without doing unregister.
This can be seen in ib_umem_dmabuf_get() which calls dma_buf_get() which does fget(fd)

Yeah that's essentially what I was looking for. This is defacto hand-rolling the drm_master owner tracking stuff. As long as we have something like this in place it should be fine I think. -Daniel

Quoted 23 lines
Quoted 23 lines

4. User B opens gaudi device, assumes that it has full control over the device and uploads some secrets, which happen to end up in the dma-buf region user A set up

5. User B extracts secrets.

Quoted 3 lines
Quoted 3 lines

I still don't think any of the complexity is needed, pinnable memory is a thing in Linux, just account for it in mlocked and that is enough.

It's not mlocked memory, it's mlocked memory and I can exfiltrate it. Mlock is fine, exfiltration not so much. It's mlock, but a global pool and if you didn't munlock then the next mlock from a completely different user will alias with your stuff.

Or is there something that prevents that? Oded at least explain that gaudi works like a gpu from 20 years ago, single user, no security at all within the device.
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
#19 lore raw
In reply to Jason Gunthorpe
Quoted 38 lines · Jason Gunthorpe
Quoted 21 lines · Daniel Vetter
Quoted 20 lines · Oded Gabbay
Quoted 19 lines · Jason Gunthorpe
Quoted 16 lines · Daniel Vetter
Quoted 5 lines · Oded Gabbay

Hi,
Re-sending this patch-set following the release of our user-space TPC compiler and runtime library.

I would appreciate a review on this.

I think the big open we have is the entire revoke discussions. Having the option to let dma-buf hang around which map to random local memory ranges, without clear ownership link and a way to kill it sounds bad to me.

I think there's a few options:
- We require revoke support. But I've heard rdma really doesn't like that, I guess because taking out an MR while holding the dma_resv_lock would be an inversion, so can't be done. Jason, can you recap what exactly the hold-up was again that makes this a no-go?

Quoted 5 lines
Quoted 1 line
Quoted 1 line

RDMA HW can't do revoke.

Like why? I'm assuming when the final open handle or whatever for that MR is closed, you do clean up everything? Or does that MR still stick around forever too?

It is a combination of uAPI and HW specification.

revoke here means you take a MR object and tell it to stop doing DMA without causing the MR object to be destructed.

All the drivers can of course destruct the MR, but doing such a destruction without explicit synchronization with user space opens things up to a serious use-after potential that could be a security issue.

Quoted 6 lines

When the open handle closes the userspace is synchronized with the kernel and we can destruct the HW objects safely.

So, the special HW feature required is 'stop doing DMA but keep the object in an error state' which isn't really implemented, and doesn't extend very well to other object types beyond simple MRs.

Yeah revoke without destroying the MR doesn't work, and it sounds like revoke by destroying the MR just moves the can of worms around to another place.

Quoted 11 lines
Quoted 10 lines

1. User A opens gaudi device, sets up dma-buf export

2. User A registers that with RDMA, or anything else that doesn't support revoke.

3. User A closes gaudi device

4. User B opens gaudi device, assumes that it has full control over the device and uploads some secrets, which happen to end up in the dma-buf region user A set up

Quoted 8 lines

I would expect this is blocked so long as the DMABUF exists - eg the DMABUF will hold a fget on the FD of #1 until the DMABUF is closed, so that #3 can't actually happen.

Quoted 2 lines

It's not mlocked memory, it's mlocked memory and I can exfiltrate it.

That's just bug, don't make buggy drivers :)

Well yeah, but given that habanalabs hand rolled this I can't just check for the usual things we have to enforce this in drm. And generally you can just open chardevs arbitrarily, and multiple users fighting over each another. The troubles only start when you have private state or memory allocations of some kind attached to the struct file (instead of the underlying device), or something else that requires device exclusivity. There's no standard way to do that.

Plus in many cases you really want revoke on top (can't get that here unfortunately it seems), and the attempts to get towards a generic revoke() just never went anywhere. So again it's all hand-rolled per-subsystem. *insert lament about us not having done this through a proper subsystem*

Anyway it sounds like the code takes care of that. -Daniel

Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
#20 lore raw
Quoted 79 lines · Daniel Vetter
Quoted 38 lines · Jason Gunthorpe
Quoted 21 lines · Daniel Vetter
Quoted 20 lines · Oded Gabbay
Quoted 19 lines · Jason Gunthorpe
Quoted 16 lines · Daniel Vetter
Quoted 5 lines · Oded Gabbay

Hi,
Re-sending this patch-set following the release of our user-space TPC compiler and runtime library.

I would appreciate a review on this.

I think the big open we have is the entire revoke discussions. Having the option to let dma-buf hang around which map to random local memory ranges, without clear ownership link and a way to kill it sounds bad to me.

I think there's a few options:
- We require revoke support. But I've heard rdma really doesn't like that, I guess because taking out an MR while holding the dma_resv_lock would be an inversion, so can't be done. Jason, can you recap what exactly the hold-up was again that makes this a no-go?

Quoted 5 lines
Quoted 1 line
Quoted 1 line

RDMA HW can't do revoke.

Like why? I'm assuming when the final open handle or whatever for that MR is closed, you do clean up everything? Or does that MR still stick around forever too?

It is a combination of uAPI and HW specification.

revoke here means you take a MR object and tell it to stop doing DMA without causing the MR object to be destructed.

All the drivers can of course destruct the MR, but doing such a destruction without explicit synchronization with user space opens things up to a serious use-after potential that could be a security issue.

Quoted 6 lines

When the open handle closes the userspace is synchronized with the kernel and we can destruct the HW objects safely.

So, the special HW feature required is 'stop doing DMA but keep the object in an error state' which isn't really implemented, and doesn't extend very well to other object types beyond simple MRs.

Yeah revoke without destroying the MR doesn't work, and it sounds like revoke by destroying the MR just moves the can of worms around to another place.

Quoted 11 lines
Quoted 10 lines

1. User A opens gaudi device, sets up dma-buf export

2. User A registers that with RDMA, or anything else that doesn't support revoke.

3. User A closes gaudi device

4. User B opens gaudi device, assumes that it has full control over the device and uploads some secrets, which happen to end up in the dma-buf region user A set up

Quoted 8 lines

I would expect this is blocked so long as the DMABUF exists - eg the DMABUF will hold a fget on the FD of #1 until the DMABUF is closed, so that #3 can't actually happen.

Quoted 2 lines

It's not mlocked memory, it's mlocked memory and I can exfiltrate it.

That's just bug, don't make buggy drivers :)

Well yeah, but given that habanalabs hand rolled this I can't just check for the usual things we have to enforce this in drm. And generally you can just open chardevs arbitrarily, and multiple users fighting over each another. The troubles only start when you have private state or memory allocations of some kind attached to the struct file (instead of the underlying device), or something else that requires device exclusivity. There's no standard way to do that.

Quoted 8 lines

Plus in many cases you really want revoke on top (can't get that here unfortunately it seems), and the attempts to get towards a generic revoke() just never went anywhere. So again it's all hand-rolled per-subsystem. *insert lament about us not having done this through a proper subsystem*

Anyway it sounds like the code takes care of that. -Daniel

Daniel, Jason,
Thanks for reviewing this code.

Can I get an R-B / A-B from you for this patch-set ?

Thanks,
Oded

#21 lore raw
Quoted 90 lines · Oded Gabbay
Quoted 79 lines · Daniel Vetter
Quoted 38 lines · Jason Gunthorpe
Quoted 21 lines · Daniel Vetter
Quoted 20 lines · Oded Gabbay
Quoted 19 lines · Jason Gunthorpe
Quoted 16 lines · Daniel Vetter
Quoted 5 lines · Oded Gabbay

Hi,
Re-sending this patch-set following the release of our user-space TPC compiler and runtime library.

I would appreciate a review on this.

I think the big open we have is the entire revoke discussions. Having the option to let dma-buf hang around which map to random local memory ranges, without clear ownership link and a way to kill it sounds bad to me.

I think there's a few options:
- We require revoke support. But I've heard rdma really doesn't like that, I guess because taking out an MR while holding the dma_resv_lock would be an inversion, so can't be done. Jason, can you recap what exactly the hold-up was again that makes this a no-go?

Quoted 5 lines
Quoted 1 line
Quoted 1 line

RDMA HW can't do revoke.

Like why? I'm assuming when the final open handle or whatever for that MR is closed, you do clean up everything? Or does that MR still stick around forever too?

It is a combination of uAPI and HW specification.

revoke here means you take a MR object and tell it to stop doing DMA without causing the MR object to be destructed.

All the drivers can of course destruct the MR, but doing such a destruction without explicit synchronization with user space opens things up to a serious use-after potential that could be a security issue.

Quoted 6 lines

When the open handle closes the userspace is synchronized with the kernel and we can destruct the HW objects safely.

So, the special HW feature required is 'stop doing DMA but keep the object in an error state' which isn't really implemented, and doesn't extend very well to other object types beyond simple MRs.

Yeah revoke without destroying the MR doesn't work, and it sounds like revoke by destroying the MR just moves the can of worms around to another place.

Quoted 11 lines
Quoted 10 lines

1. User A opens gaudi device, sets up dma-buf export

2. User A registers that with RDMA, or anything else that doesn't support revoke.

3. User A closes gaudi device

4. User B opens gaudi device, assumes that it has full control over the device and uploads some secrets, which happen to end up in the dma-buf region user A set up

Quoted 8 lines

I would expect this is blocked so long as the DMABUF exists - eg the DMABUF will hold a fget on the FD of #1 until the DMABUF is closed, so that #3 can't actually happen.

Quoted 2 lines

It's not mlocked memory, it's mlocked memory and I can exfiltrate it.

That's just bug, don't make buggy drivers :)

Well yeah, but given that habanalabs hand rolled this I can't just check for the usual things we have to enforce this in drm. And generally you can just open chardevs arbitrarily, and multiple users fighting over each another. The troubles only start when you have private state or memory allocations of some kind attached to the struct file (instead of the underlying device), or something else that requires device exclusivity. There's no standard way to do that.

Quoted 8 lines

Plus in many cases you really want revoke on top (can't get that here unfortunately it seems), and the attempts to get towards a generic revoke() just never went anywhere. So again it's all hand-rolled per-subsystem. *insert lament about us not having done this through a proper subsystem*

Anyway it sounds like the code takes care of that. -Daniel

Quoted 7 lines

Daniel, Jason,
Thanks for reviewing this code.

Can I get an R-B / A-B from you for this patch-set ?

Thanks,
Oded

A kind reminder.

Thanks,
Oded

#22 lore raw
Quoted 97 lines · Oded Gabbay
Quoted 95 lines · Oded Gabbay
Quoted 79 lines · Daniel Vetter
Quoted 38 lines · Jason Gunthorpe
Quoted 21 lines · Daniel Vetter
Quoted 20 lines · Oded Gabbay
Quoted 19 lines · Jason Gunthorpe
Quoted 16 lines · Daniel Vetter
Quoted 5 lines · Oded Gabbay

Hi,
Re-sending this patch-set following the release of our user-space TPC compiler and runtime library.

I would appreciate a review on this.

I think the big open we have is the entire revoke discussions. Having the option to let dma-buf hang around which map to random local memory ranges, without clear ownership link and a way to kill it sounds bad to me.

I think there's a few options:
- We require revoke support. But I've heard rdma really doesn't like that, I guess because taking out an MR while holding the dma_resv_lock would be an inversion, so can't be done. Jason, can you recap what exactly the hold-up was again that makes this a no-go?

Quoted 5 lines
Quoted 1 line
Quoted 1 line

RDMA HW can't do revoke.

Like why? I'm assuming when the final open handle or whatever for that MR is closed, you do clean up everything? Or does that MR still stick around forever too?

It is a combination of uAPI and HW specification.

revoke here means you take a MR object and tell it to stop doing DMA without causing the MR object to be destructed.

All the drivers can of course destruct the MR, but doing such a destruction without explicit synchronization with user space opens things up to a serious use-after potential that could be a security issue.

Quoted 6 lines

When the open handle closes the userspace is synchronized with the kernel and we can destruct the HW objects safely.

So, the special HW feature required is 'stop doing DMA but keep the object in an error state' which isn't really implemented, and doesn't extend very well to other object types beyond simple MRs.

Yeah revoke without destroying the MR doesn't work, and it sounds like revoke by destroying the MR just moves the can of worms around to another place.

Quoted 11 lines
Quoted 10 lines

1. User A opens gaudi device, sets up dma-buf export

2. User A registers that with RDMA, or anything else that doesn't support revoke.

3. User A closes gaudi device

4. User B opens gaudi device, assumes that it has full control over the device and uploads some secrets, which happen to end up in the dma-buf region user A set up

Quoted 8 lines

I would expect this is blocked so long as the DMABUF exists - eg the DMABUF will hold a fget on the FD of #1 until the DMABUF is closed, so that #3 can't actually happen.

Quoted 2 lines

It's not mlocked memory, it's mlocked memory and I can exfiltrate it.

That's just bug, don't make buggy drivers :)

Well yeah, but given that habanalabs hand rolled this I can't just check for the usual things we have to enforce this in drm. And generally you can just open chardevs arbitrarily, and multiple users fighting over each another. The troubles only start when you have private state or memory allocations of some kind attached to the struct file (instead of the underlying device), or something else that requires device exclusivity. There's no standard way to do that.

Quoted 8 lines

Plus in many cases you really want revoke on top (can't get that here unfortunately it seems), and the attempts to get towards a generic revoke() just never went anywhere. So again it's all hand-rolled per-subsystem. *insert lament about us not having done this through a proper subsystem*

Anyway it sounds like the code takes care of that. -Daniel

Daniel, Jason,
Thanks for reviewing this code.

Can I get an R-B / A-B from you for this patch-set ?

Quoted 7 lines
Quoted 2 lines

Thanks,
Oded

A kind reminder.

Thanks,
Oded

Hi,
I know last week was LPC and maybe this got lost in the inbox, so I'm sending it again to make sure you got my request for R-B / A-B.

Thanks,
Oded

#2 lore raw

Re: [PATCH v6 1/2] habanalabs: define uAPI to export FD for DMA-BUF

In reply to Oded Gabbay
Quoted 11 lines · Oded Gabbay
include/uapi/misc/habanalabs.h +4 -1
 	/* HL_MEM_OP_* */
 	__u32 op;
-	/* HL_MEM_* flags */
+	/* HL_MEM_* flags.
+	 * For the HL_MEM_OP_EXPORT_DMABUF_FD opcode, this field holds the
+	 * DMA-BUF file/FD flags.
+	 */
 	__u32 flags;
 	/* Context ID - Currently not in use */
 	__u32 ctx_id;

include/uapi/misc/habanalabs.h struct hl_mem_out { · line 1100

Quoted 10 lines
include/uapi/misc/habanalabs.h +7 -0
@@ -1072,6 +1091,13 @@ struct hl_mem_out {
 
 			__u32 pad;
 		};
+
+		/* Returned in HL_MEM_OP_EXPORT_DMABUF_FD. Represents the
+		 * DMA-BUF object that was created to describe a memory
+		 * allocation on the device's memory space. The FD should be
+		 * passed to the importer driver
+		 */
+		__u64 fd;

fd's should be a s32 type in a fixed width uapi.

I usually expect to see the uapi changes inside the commit that consumes them, splitting the patch like this seems strange but harmless.

Jason

#5 lore raw

Re: [PATCH v6 2/2] habanalabs: add support for dma-buf exporter

In reply to Oded Gabbay
Quoted 7 lines · Oded Gabbay

From: Tomer Tayar <[email protected]>

Implement the calls to the dma-buf kernel api to create a dma-buf object backed by FD.

We block the option to mmap the DMA-BUF object because we don't support DIRECT_IO and implicit P2P.

This statement doesn't make sense, you can mmap your dmabuf if you like. All dmabuf mmaps are supposed to set the special bit/etc to exclude them from get_user_pages() anyhow - and since this is BAR memory not struct page memory this driver would be doing it anyhow.

Quoted 2 lines

We check the p2p distance using pci_p2pdma_distance_many() and refusing to map dmabuf in case the distance doesn't allow p2p.

Does this actually allow the p2p transfer for your intended use cases?

Quoted 14 lines
drivers/misc/habanalabs/common/memory.c +2 -1
index 33986933aa9e..8cf5437c0390 100644
+++ b/drivers/misc/habanalabs/common/memory.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 
 /*
- * Copyright 2016-2019 HabanaLabs, Ltd.
+ * Copyright 2016-2021 HabanaLabs, Ltd.
  * All Rights Reserved.
  */
 
@@ -11,11 +11,13 @@
 

drivers/misc/habanalabs/common/memory.c line 20

Quoted 10 lines
drivers/misc/habanalabs/common/memory.c +3 -1
 #include <linux/uaccess.h>
 #include <linux/slab.h>
+#include <linux/pci-p2pdma.h>
 
 #define HL_MMU_DEBUG	0
 
 /* use small pages for supporting non-pow2 (32M/40M/48M) DRAM phys page sizes */
-#define DRAM_POOL_PAGE_SIZE SZ_8M
+#define DRAM_POOL_PAGE_SIZE		SZ_8M
+

??

drivers/misc/habanalabs/common/memory.c static int free_device_memory(struct hl_ctx *ctx, struct hl_mem_in *args) · line 355

Quoted 10 lines
drivers/misc/habanalabs/common/memory.c +4 -0
 /*
  * The va ranges in context object contain a list with the available chunks of
@@ -347,6 +349,13 @@ static int free_device_memory(struct hl_ctx *ctx, struct hl_mem_in *args)
 			return -EINVAL;
 		}
 
+		if (phys_pg_pack->exporting_cnt) {
+			dev_err(hdev->dev,
+				"handle %u is exported, cannot free\n",	handle);
+			spin_unlock(&vm->idr_lock);

Don't write to the kernel log from user space triggered actions

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1522

Quoted 5 lines
drivers/misc/habanalabs/common/memory.c +5 -0
+static int alloc_sgt_from_device_pages(struct hl_device *hdev,
+					struct sg_table **sgt, u64 *pages,
+					u64 npages, u64 page_size,
+					struct device *dev,
+					enum dma_data_direction dir)

Why doesn't this return a sg_table * and an ERR_PTR?

Quoted 47 lines
drivers/misc/habanalabs/common/memory.c +46 -0
+{
+	u64 chunk_size, bar_address, dma_max_seg_size;
+	struct asic_fixed_properties *prop;
+	int rc, i, j, nents, cur_page;
+	struct scatterlist *sg;
+
+	prop = &hdev->asic_prop;
+
+	dma_max_seg_size = dma_get_max_seg_size(dev);
 
+
+	/* We would like to align the max segment size to PAGE_SIZE, so the
+	 * SGL will contain aligned addresses that can be easily mapped to
+	 * an MMU
+	 */
+	dma_max_seg_size = ALIGN_DOWN(dma_max_seg_size, PAGE_SIZE);
+	if (dma_max_seg_size < PAGE_SIZE) {
+		dev_err_ratelimited(hdev->dev,
+				"dma_max_seg_size %llu can't be smaller than PAGE_SIZE\n",
+				dma_max_seg_size);
+		return -EINVAL;
+	}
+
+	*sgt = kzalloc(sizeof(**sgt), GFP_KERNEL);
+	if (!*sgt)
+		return -ENOMEM;
+
+	/* If the size of each page is larger than the dma max segment size,
+	 * then we can't combine pages and the number of entries in the SGL
+	 * will just be the
+	 * <number of pages> * <chunks of max segment size in each page>
+	 */
+	if (page_size > dma_max_seg_size)
+		nents = npages * DIV_ROUND_UP_ULL(page_size, dma_max_seg_size);
+	else
+		/* Get number of non-contiguous chunks */
+		for (i = 1, nents = 1, chunk_size = page_size ; i < npages ; i++) {
+			if (pages[i - 1] + page_size != pages[i] ||
+					chunk_size + page_size > dma_max_seg_size) {
+				nents++;
+				chunk_size = page_size;
+				continue;
+			}
+
+			chunk_size += page_size;
+		}
+

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1578

Quoted 10 lines
drivers/misc/habanalabs/common/memory.c +10 -0
+	rc = sg_alloc_table(*sgt, nents, GFP_KERNEL | __GFP_ZERO);
+	if (rc)
+		goto error_free;
+
+	/* Because we are not going to include a CPU list we want to have some
+	 * chance that other users will detect this by setting the orig_nents
+	 * to 0 and using only nents (length of DMA list) when going over the
+	 * sgl
+	 */
+	(*sgt)->orig_nents = 0;

Maybe do this at the end so you'd have to undo it on the error path?

Quoted 44 lines
drivers/misc/habanalabs/common/memory.c +44 -0
+	cur_page = 0;
+
+	if (page_size > dma_max_seg_size) {
+		u64 size_left, cur_device_address = 0;
+
+		size_left = page_size;
+
+		/* Need to split each page into the number of chunks of
+		 * dma_max_seg_size
+		 */
+		for_each_sgtable_dma_sg((*sgt), sg, i) {
+			if (size_left == page_size)
+				cur_device_address =
+					pages[cur_page] - prop->dram_base_address;
+			else
+				cur_device_address += dma_max_seg_size;
+
+			chunk_size = min(size_left, dma_max_seg_size);
+
+			bar_address = hdev->dram_pci_bar_start + cur_device_address;
+
+			rc = set_dma_sg(sg, bar_address, chunk_size, dev, dir);
+			if (rc)
+				goto error_unmap;
+
+			if (size_left > dma_max_seg_size) {
+				size_left -= dma_max_seg_size;
+			} else {
+				cur_page++;
+				size_left = page_size;
+			}
+		}
+	} else {
+		/* Merge pages and put them into the scatterlist */
+		for_each_sgtable_dma_sg((*sgt), sg, i) {
+			chunk_size = page_size;
+			for (j = cur_page + 1 ; j < npages ; j++) {
+				if (pages[j - 1] + page_size != pages[j] ||
+						chunk_size + page_size > dma_max_seg_size)
+					break;
+
+				chunk_size += page_size;
+			}
+

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1633

Quoted 10 lines
drivers/misc/habanalabs/common/memory.c +10 -0
+			bar_address = hdev->dram_pci_bar_start +
+					(pages[cur_page] - prop->dram_base_address);
+
+			rc = set_dma_sg(sg, bar_address, chunk_size, dev, dir);
+			if (rc)
+				goto error_unmap;
+
+			cur_page = j;
+		}
+	}

We have this sg_append stuff now that is intended to help building these things. It can only build CPU page lists, not these DMA lists, but I do wonder if open coding in drivers is slipping back a bit. Especially since AMD seems to be doing something different.

Could the DMABUF layer gain some helpers styled after the sg_append to simplify building these things? and convert the AMD driver of course.

Quoted 4 lines
drivers/misc/habanalabs/common/memory.c +4 -0
+static int hl_dmabuf_attach(struct dma_buf *dmabuf,
+				struct dma_buf_attachment *attachment)
+{
+	struct hl_dmabuf_wrapper *hl_dmabuf;

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1669

Quoted 10 lines
drivers/misc/habanalabs/common/memory.c +10 -0
+	struct hl_device *hdev;
+	int rc;
+
+	hl_dmabuf = dmabuf->priv;
+	hdev = hl_dmabuf->ctx->hdev;
+
+	rc = pci_p2pdma_distance_many(hdev->pdev, &attachment->dev, 1, true);
+
+	if (rc < 0)
+		attachment->peer2peer = false;

Extra blank line

Quoted 12 lines
drivers/misc/habanalabs/common/memory.c +12 -0
+
+	return 0;
+}
+
+static struct sg_table *hl_map_dmabuf(struct dma_buf_attachment *attachment,
+					enum dma_data_direction dir)
+{
+	struct dma_buf *dma_buf = attachment->dmabuf;
+	struct hl_vm_phys_pg_pack *phys_pg_pack;
+	struct hl_dmabuf_wrapper *hl_dmabuf;
+	struct hl_device *hdev;
+	struct sg_table *sgt;

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1691

Quoted 10 lines
drivers/misc/habanalabs/common/memory.c +10 -0
+	int rc;
+
+	hl_dmabuf = dma_buf->priv;
+	hdev = hl_dmabuf->ctx->hdev;
+	phys_pg_pack = hl_dmabuf->phys_pg_pack;
+
+	if (!attachment->peer2peer) {
+		dev_err(hdev->dev,
+			"Failed to map dmabuf because p2p is disabled\n");
+		return ERR_PTR(-EPERM);

User triggered printable again?

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1729

Quoted 11 lines
drivers/misc/habanalabs/common/memory.c +11 -0
+static void hl_unmap_dmabuf(struct dma_buf_attachment *attachment,
+				  struct sg_table *sgt,
+				  enum dma_data_direction dir)
+{
+	struct scatterlist *sg;
+	int i;
+
+	for_each_sgtable_dma_sg(sgt, sg, i)
+		dma_unmap_resource(attachment->dev, sg_dma_address(sg),
+					sg_dma_len(sg), dir,
+					DMA_ATTR_SKIP_CPU_SYNC);

Why can we skip the CPU_SYNC? Seems like a comment is needed

Something has to do a CPU_SYNC before recylcing this memory for another purpose, where is it?

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1739

Quoted 3 lines
drivers/misc/habanalabs/common/memory.c +3 -0
+static void hl_release_dmabuf(struct dma_buf *dmabuf)
+{
+	struct hl_dmabuf_wrapper *hl_dmabuf = dmabuf->priv;

Maybe hl_dmabuf_wrapper should be hl_dmabuf_priv

Quoted 49 lines

+ * export_dmabuf_from_addr() - export a dma-buf object for the given memory
+ * address and size.
+ * @ctx: pointer to the context structure.
+ * @device_addr: device memory physical address.
+ * @size: size of device memory.
+ * @flags: DMA-BUF file/FD flags.
+ * @dmabuf_fd: pointer to result FD that represents the dma-buf object.
+ *
+ * Create and export a dma-buf object for an existing memory allocation inside
+ * the device memory, and return a FD which is associated with the dma-buf
+ * object.
+ *
+ * Return: 0 on success, non-zero for failure.
+ */

drivers/misc/habanalabs/common/memory.c +35 -0
+static int export_dmabuf_from_addr(struct hl_ctx *ctx, u64 device_addr,
+					u64 size, int flags, int *dmabuf_fd)
+{
+	struct hl_dmabuf_wrapper *hl_dmabuf;
+	struct hl_device *hdev = ctx->hdev;
+	struct asic_fixed_properties *prop;
+	u64 bar_address;
+	int rc;
+
+	prop = &hdev->asic_prop;
+
+	if (!IS_ALIGNED(device_addr, PAGE_SIZE)) {
+		dev_err_ratelimited(hdev->dev,
+			"address of exported device memory should be aligned to 0x%lx, address 0x%llx\n",
+			PAGE_SIZE, device_addr);
+		return -EINVAL;
+	}
+
+	if (size < PAGE_SIZE) {
+		dev_err_ratelimited(hdev->dev,
+			"size %llu of exported device memory should be equal to or greater than %lu\n",
+			size, PAGE_SIZE);
+		return -EINVAL;
+	}
+
+	if (device_addr < prop->dram_user_base_address ||
+				device_addr + size > prop->dram_end_address ||
+				device_addr + size < device_addr) {
+		dev_err_ratelimited(hdev->dev,
+			"DRAM memory range is outside of DRAM boundaries, address 0x%llx, size 0x%llx\n",
+			device_addr, size);
+		return -EINVAL;
+	}
+
+	bar_address = hdev->dram_pci_bar_start +

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1860

Quoted 10 lines
drivers/misc/habanalabs/common/memory.c +10 -0
+			(device_addr - prop->dram_base_address);
+
+	if (bar_address + size >
+			hdev->dram_pci_bar_start + prop->dram_pci_bar_size ||
+			bar_address + size < bar_address) {
+		dev_err_ratelimited(hdev->dev,
+			"DRAM memory range is outside of PCI BAR boundaries, address 0x%llx, size 0x%llx\n",
+			device_addr, size);
+		return -EINVAL;
+	}

More prints from userspace

Quoted 5 lines
drivers/misc/habanalabs/common/memory.c +5 -0
+static int export_dmabuf_from_handle(struct hl_ctx *ctx, u64 handle, int flags,
+					int *dmabuf_fd)
+{
+	struct hl_vm_phys_pg_pack *phys_pg_pack;
+	struct hl_dmabuf_wrapper *hl_dmabuf;

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1907

Quoted 10 lines
drivers/misc/habanalabs/common/memory.c +10 -0
+	struct hl_device *hdev = ctx->hdev;
+	struct asic_fixed_properties *prop;
+	struct hl_vm *vm = &hdev->vm;
+	u64 bar_address;
+	u32 idr_handle;
+	int rc, i;
+
+	prop = &hdev->asic_prop;
+
+	idr_handle = lower_32_bits(handle);

Why silent truncation? Shouldn't setting the upper 32 bits be an error?

drivers/misc/habanalabs/common/memory.c static int mem_ioctl_no_mmu(struct hl_fpriv *hpriv, union hl_mem_args *args) · line 2040

Quoted 8 lines
drivers/misc/habanalabs/common/memory.c +8 -0
+	case HL_MEM_OP_EXPORT_DMABUF_FD:
+		rc = export_dmabuf_from_addr(ctx,
+				args->in.export_dmabuf_fd.handle,
+				args->in.export_dmabuf_fd.mem_size,
+				args->in.flags,
+				&dmabuf_fd);
+		memset(args, 0, sizeof(*args));
+		args->out.fd = dmabuf_fd;

Would expect the installed fd to be the positive return, not a pointer

Jason

#3 lore raw

Re: [PATCH v6 1/2] habanalabs: define uAPI to export FD for DMA-BUF

In reply to Jason Gunthorpe
Quoted 14 lines · Jason Gunthorpe
Quoted 12 lines · Oded Gabbay
      /* HL_MEM_OP_* */
      __u32 op;
include/uapi/misc/habanalabs.h +4 -1
-     /* HL_MEM_* flags */
+     /* HL_MEM_* flags.
+      * For the HL_MEM_OP_EXPORT_DMABUF_FD opcode, this field holds the
+      * DMA-BUF file/FD flags.
+      */
      __u32 flags;
      /* Context ID - Currently not in use */
      __u32 ctx_id;
@@ -1072,6 +1091,13 @@ struct hl_mem_out {
 
Quoted 11 lines

include/uapi/misc/habanalabs.h struct hl_mem_out { · line 1100

Quoted 9 lines
include/uapi/misc/habanalabs.h +7 -0
                      __u32 pad;
              };
+
+             /* Returned in HL_MEM_OP_EXPORT_DMABUF_FD. Represents the
+              * DMA-BUF object that was created to describe a memory
+              * allocation on the device's memory space. The FD should be
+              * passed to the importer driver
+              */
+             __u64 fd;

fd's should be a s32 type in a fixed width uapi.

Yep, will correct this.

Quoted 4 lines

I usually expect to see the uapi changes inside the commit that consumes them, splitting the patch like this seems strange but harmless.

I'll remember that when I send the RDMA patches down the road :)

Thanks,
Oded

Quoted 2 lines

Jason

#6 lore raw

Re: [PATCH v6 2/2] habanalabs: add support for dma-buf exporter

In reply to Jason Gunthorpe
Quoted 7 lines · Jason Gunthorpe
Quoted 5 lines · Oded Gabbay

From: Tomer Tayar <[email protected]>

Implement the calls to the dma-buf kernel api to create a dma-buf object backed by FD.

Quoted 8 lines
Quoted 2 lines

We block the option to mmap the DMA-BUF object because we don't support DIRECT_IO and implicit P2P.

This statement doesn't make sense, you can mmap your dmabuf if you like. All dmabuf mmaps are supposed to set the special bit/etc to exclude them from get_user_pages() anyhow - and since this is BAR memory not struct page memory this driver would be doing it anyhow.

But we block mmap the dmabuf fd from user-space.
If you try to do it, you will get MAP_FAILED.
That's because we don't supply a function to the mmap callback in dmabuf. We did that per Christian's advice. It is in one of the long email threads on previous versions of this patch.

Quoted 5 lines
Quoted 2 lines

We check the p2p distance using pci_p2pdma_distance_many() and refusing to map dmabuf in case the distance doesn't allow p2p.

Does this actually allow the p2p transfer for your intended use cases?

It depends on the system. If we are working bare-metal, then yes, it allows. If inside a VM, then no. The virtualized root complex is not white-listed and the kernel can't know the distance.
But I remember you asked me to add this check, in v3 of the review IIRC. I don't mind removing this check if you don't object.

Quoted 18 lines
Quoted 18 lines
drivers/misc/habanalabs/common/memory.c +3 -1
index 33986933aa9e..8cf5437c0390 100644
+++ b/drivers/misc/habanalabs/common/memory.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 
 /*
- * Copyright 2016-2019 HabanaLabs, Ltd.
+ * Copyright 2016-2021 HabanaLabs, Ltd.
  * All Rights Reserved.
  */
 
@@ -11,11 +11,13 @@
 
 #include <linux/uaccess.h>
 #include <linux/slab.h>
+#include <linux/pci-p2pdma.h>
 
Quoted 8 lines

drivers/misc/habanalabs/common/memory.c line 20

Quoted 6 lines
drivers/misc/habanalabs/common/memory.c +2 -1
 #define HL_MMU_DEBUG 0
 
 /* use small pages for supporting non-pow2 (32M/40M/48M) DRAM phys page sizes */
-#define DRAM_POOL_PAGE_SIZE SZ_8M
+#define DRAM_POOL_PAGE_SIZE          SZ_8M
+

??

ok, I 'll remove

Quoted 7 lines
Quoted 7 lines
drivers/misc/habanalabs/common/memory.c +0 -0
 /*
  * The va ranges in context object contain a list with the available chunks of
@@ -347,6 +349,13 @@ static int free_device_memory(struct hl_ctx *ctx, struct hl_mem_in *args)
                      return -EINVAL;
              }
 
Quoted 6 lines

drivers/misc/habanalabs/common/memory.c static int free_device_memory(struct hl_ctx *ctx, struct hl_mem_in *args) · line 355

Quoted 4 lines
drivers/misc/habanalabs/common/memory.c +4 -0
+             if (phys_pg_pack->exporting_cnt) {
+                     dev_err(hdev->dev,
+                             "handle %u is exported, cannot free\n", handle);
+                     spin_unlock(&vm->idr_lock);

Don't write to the kernel log from user space triggered actions

at all ?
It's the first time I hear about this limitation...
How do you tell the user it has done something wrong ? I agree it might be better to rate limit it, but why not give the information to the user ?

Quoted 8 lines

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1522

Quoted 6 lines
drivers/misc/habanalabs/common/memory.c +5 -0
+static int alloc_sgt_from_device_pages(struct hl_device *hdev,
+                                     struct sg_table **sgt, u64 *pages,
+                                     u64 npages, u64 page_size,
+                                     struct device *dev,
+                                     enum dma_data_direction dir)

Why doesn't this return a sg_table * and an ERR_PTR?

Basically I modeled this function after amdgpu_vram_mgr_alloc_sgt() And in that function they also return int and pass the sg_table as **

If it's critical I can change.

Quoted 52 lines
Quoted 52 lines
drivers/misc/habanalabs/common/memory.c +50 -0
+{
+     u64 chunk_size, bar_address, dma_max_seg_size;
+     struct asic_fixed_properties *prop;
+     int rc, i, j, nents, cur_page;
+     struct scatterlist *sg;
+
+     prop = &hdev->asic_prop;
+
+     dma_max_seg_size = dma_get_max_seg_size(dev);
 
+
+     /* We would like to align the max segment size to PAGE_SIZE, so the
+      * SGL will contain aligned addresses that can be easily mapped to
+      * an MMU
+      */
+     dma_max_seg_size = ALIGN_DOWN(dma_max_seg_size, PAGE_SIZE);
+     if (dma_max_seg_size < PAGE_SIZE) {
+             dev_err_ratelimited(hdev->dev,
+                             "dma_max_seg_size %llu can't be smaller than PAGE_SIZE\n",
+                             dma_max_seg_size);
+             return -EINVAL;
+     }
+
+     *sgt = kzalloc(sizeof(**sgt), GFP_KERNEL);
+     if (!*sgt)
+             return -ENOMEM;
+
+     /* If the size of each page is larger than the dma max segment size,
+      * then we can't combine pages and the number of entries in the SGL
+      * will just be the
+      * <number of pages> * <chunks of max segment size in each page>
+      */
+     if (page_size > dma_max_seg_size)
+             nents = npages * DIV_ROUND_UP_ULL(page_size, dma_max_seg_size);
+     else
+             /* Get number of non-contiguous chunks */
+             for (i = 1, nents = 1, chunk_size = page_size ; i < npages ; i++) {
+                     if (pages[i - 1] + page_size != pages[i] ||
+                                     chunk_size + page_size > dma_max_seg_size) {
+                             nents++;
+                             chunk_size = page_size;
+                             continue;
+                     }
+
+                     chunk_size += page_size;
+             }
+
+     rc = sg_alloc_table(*sgt, nents, GFP_KERNEL | __GFP_ZERO);
+     if (rc)
+             goto error_free;
+
Quoted 8 lines

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1578

Quoted 6 lines
drivers/misc/habanalabs/common/memory.c +6 -0
+     /* Because we are not going to include a CPU list we want to have some
+      * chance that other users will detect this by setting the orig_nents
+      * to 0 and using only nents (length of DMA list) when going over the
+      * sgl
+      */
+     (*sgt)->orig_nents = 0;

Maybe do this at the end so you'd have to undo it on the error path?

Agreed, less code

Quoted 61 lines
Quoted 45 lines
drivers/misc/habanalabs/common/memory.c +44 -0
+     cur_page = 0;
+
+     if (page_size > dma_max_seg_size) {
+             u64 size_left, cur_device_address = 0;
+
+             size_left = page_size;
+
+             /* Need to split each page into the number of chunks of
+              * dma_max_seg_size
+              */
+             for_each_sgtable_dma_sg((*sgt), sg, i) {
+                     if (size_left == page_size)
+                             cur_device_address =
+                                     pages[cur_page] - prop->dram_base_address;
+                     else
+                             cur_device_address += dma_max_seg_size;
+
+                     chunk_size = min(size_left, dma_max_seg_size);
+
+                     bar_address = hdev->dram_pci_bar_start + cur_device_address;
+
+                     rc = set_dma_sg(sg, bar_address, chunk_size, dev, dir);
+                     if (rc)
+                             goto error_unmap;
+
+                     if (size_left > dma_max_seg_size) {
+                             size_left -= dma_max_seg_size;
+                     } else {
+                             cur_page++;
+                             size_left = page_size;
+                     }
+             }
+     } else {
+             /* Merge pages and put them into the scatterlist */
+             for_each_sgtable_dma_sg((*sgt), sg, i) {
+                     chunk_size = page_size;
+                     for (j = cur_page + 1 ; j < npages ; j++) {
+                             if (pages[j - 1] + page_size != pages[j] ||
+                                             chunk_size + page_size > dma_max_seg_size)
+                                     break;
+
+                             chunk_size += page_size;
+                     }
+

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1633

Quoted 10 lines
drivers/misc/habanalabs/common/memory.c +10 -0
+                     bar_address = hdev->dram_pci_bar_start +
+                                     (pages[cur_page] - prop->dram_base_address);
+
+                     rc = set_dma_sg(sg, bar_address, chunk_size, dev, dir);
+                     if (rc)
+                             goto error_unmap;
+
+                     cur_page = j;
+             }
+     }

We have this sg_append stuff now that is intended to help building these things. It can only build CPU page lists, not these DMA lists, but I do wonder if open coding in drivers is slipping back a bit. Especially since AMD seems to be doing something different.

Quoted 3 lines

Could the DMABUF layer gain some helpers styled after the sg_append to simplify building these things? and convert the AMD driver of course.

I will take it as a task to do in the near future, but I prefer to first upstream these patches as-is,
because I don't have a way to check AMD devices and I guess converting them might take some time.

Quoted 33 lines
Quoted 4 lines
drivers/misc/habanalabs/common/memory.c +4 -0
+static int hl_dmabuf_attach(struct dma_buf *dmabuf,
+                             struct dma_buf_attachment *attachment)
+{
+     struct hl_dmabuf_wrapper *hl_dmabuf;

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1669

Quoted 10 lines
drivers/misc/habanalabs/common/memory.c +10 -0
+     struct hl_device *hdev;
+     int rc;
+
+     hl_dmabuf = dmabuf->priv;
+     hdev = hl_dmabuf->ctx->hdev;
+
+     rc = pci_p2pdma_distance_many(hdev->pdev, &attachment->dev, 1, true);
+
+     if (rc < 0)
+             attachment->peer2peer = false;

Extra blank line

Quoted 16 lines
drivers/misc/habanalabs/common/memory.c +16 -0
+
+     return 0;
+}
+
+static struct sg_table *hl_map_dmabuf(struct dma_buf_attachment *attachment,
+                                     enum dma_data_direction dir)
+{
+     struct dma_buf *dma_buf = attachment->dmabuf;
+     struct hl_vm_phys_pg_pack *phys_pg_pack;
+     struct hl_dmabuf_wrapper *hl_dmabuf;
+     struct hl_device *hdev;
+     struct sg_table *sgt;
+     int rc;
+
+     hl_dmabuf = dma_buf->priv;
+     hdev = hl_dmabuf->ctx->hdev;
Quoted 8 lines

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1691

Quoted 6 lines
drivers/misc/habanalabs/common/memory.c +6 -0
+     phys_pg_pack = hl_dmabuf->phys_pg_pack;
+
+     if (!attachment->peer2peer) {
+             dev_err(hdev->dev,
+                     "Failed to map dmabuf because p2p is disabled\n");
+             return ERR_PTR(-EPERM);

User triggered printable again?

But how will the user know what the reason for the failure is ?

Quoted 15 lines

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1729

Quoted 12 lines
drivers/misc/habanalabs/common/memory.c +11 -0
+static void hl_unmap_dmabuf(struct dma_buf_attachment *attachment,
+                               struct sg_table *sgt,
+                               enum dma_data_direction dir)
+{
+     struct scatterlist *sg;
+     int i;
+
+     for_each_sgtable_dma_sg(sgt, sg, i)
+             dma_unmap_resource(attachment->dev, sg_dma_address(sg),
+                                     sg_dma_len(sg), dir,
+                                     DMA_ATTR_SKIP_CPU_SYNC);

Why can we skip the CPU_SYNC? Seems like a comment is needed

Quoted 2 lines

Something has to do a CPU_SYNC before recylcing this memory for another purpose, where is it?

I have to ask for further explanation here.
Same as before, this function is modeled after the amdgpu one - amdgpu_vram_mgr_free_sgt()
They also use CPU_SYNC in that function.
Christain, maybe you know ?

Maybe it is not relevant to our case as it represents a PCI bar ?

Quoted 6 lines

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1739

Quoted 4 lines
drivers/misc/habanalabs/common/memory.c +3 -0
+static void hl_release_dmabuf(struct dma_buf *dmabuf)
+{
+     struct hl_dmabuf_wrapper *hl_dmabuf = dmabuf->priv;

Maybe hl_dmabuf_wrapper should be hl_dmabuf_priv

Agreed.

Quoted 73 lines
Quoted 50 lines

+ * export_dmabuf_from_addr() - export a dma-buf object for the given memory
+ * address and size.
+ * @ctx: pointer to the context structure.
+ * @device_addr: device memory physical address.
+ * @size: size of device memory.
+ * @flags: DMA-BUF file/FD flags.
+ * @dmabuf_fd: pointer to result FD that represents the dma-buf object.
+ *
+ * Create and export a dma-buf object for an existing memory allocation inside
+ * the device memory, and return a FD which is associated with the dma-buf
+ * object.
+ *
+ * Return: 0 on success, non-zero for failure.
+ */

drivers/misc/habanalabs/common/memory.c +35 -0
+static int export_dmabuf_from_addr(struct hl_ctx *ctx, u64 device_addr,
+                                     u64 size, int flags, int *dmabuf_fd)
+{
+     struct hl_dmabuf_wrapper *hl_dmabuf;
+     struct hl_device *hdev = ctx->hdev;
+     struct asic_fixed_properties *prop;
+     u64 bar_address;
+     int rc;
+
+     prop = &hdev->asic_prop;
+
+     if (!IS_ALIGNED(device_addr, PAGE_SIZE)) {
+             dev_err_ratelimited(hdev->dev,
+                     "address of exported device memory should be aligned to 0x%lx, address 0x%llx\n",
+                     PAGE_SIZE, device_addr);
+             return -EINVAL;
+     }
+
+     if (size < PAGE_SIZE) {
+             dev_err_ratelimited(hdev->dev,
+                     "size %llu of exported device memory should be equal to or greater than %lu\n",
+                     size, PAGE_SIZE);
+             return -EINVAL;
+     }
+
+     if (device_addr < prop->dram_user_base_address ||
+                             device_addr + size > prop->dram_end_address ||
+                             device_addr + size < device_addr) {
+             dev_err_ratelimited(hdev->dev,
+                     "DRAM memory range is outside of DRAM boundaries, address 0x%llx, size 0x%llx\n",
+                     device_addr, size);
+             return -EINVAL;
+     }
+
+     bar_address = hdev->dram_pci_bar_start +

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1860

Quoted 10 lines
drivers/misc/habanalabs/common/memory.c +10 -0
+                     (device_addr - prop->dram_base_address);
+
+     if (bar_address + size >
+                     hdev->dram_pci_bar_start + prop->dram_pci_bar_size ||
+                     bar_address + size < bar_address) {
+             dev_err_ratelimited(hdev->dev,
+                     "DRAM memory range is outside of PCI BAR boundaries, address 0x%llx, size 0x%llx\n",
+                     device_addr, size);
+             return -EINVAL;
+     }

More prints from userspace

Quoted 10 lines
drivers/misc/habanalabs/common/memory.c +10 -0
+static int export_dmabuf_from_handle(struct hl_ctx *ctx, u64 handle, int flags,
+                                     int *dmabuf_fd)
+{
+     struct hl_vm_phys_pg_pack *phys_pg_pack;
+     struct hl_dmabuf_wrapper *hl_dmabuf;
+     struct hl_device *hdev = ctx->hdev;
+     struct asic_fixed_properties *prop;
+     struct hl_vm *vm = &hdev->vm;
+     u64 bar_address;
+     u32 idr_handle;
Quoted 8 lines

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1907

Quoted 5 lines
drivers/misc/habanalabs/common/memory.c +5 -0
+     int rc, i;
+
+     prop = &hdev->asic_prop;
+
+     idr_handle = lower_32_bits(handle);

Why silent truncation? Shouldn't setting the upper 32 bits be an error?

Yes, you are correct. I will fix it.

Quoted 11 lines

drivers/misc/habanalabs/common/memory.c static int mem_ioctl_no_mmu(struct hl_fpriv *hpriv, union hl_mem_args *args) · line 2040

Quoted 9 lines
drivers/misc/habanalabs/common/memory.c +8 -0
+     case HL_MEM_OP_EXPORT_DMABUF_FD:
+             rc = export_dmabuf_from_addr(ctx,
+                             args->in.export_dmabuf_fd.handle,
+                             args->in.export_dmabuf_fd.mem_size,
+                             args->in.flags,
+                             &dmabuf_fd);
+             memset(args, 0, sizeof(*args));
+             args->out.fd = dmabuf_fd;

Would expect the installed fd to be the positive return, not a pointer

yeah, changed it to s32 as you suggested.

Quoted 2 lines

Jason

Acked-by
#23 lore raw
In reply to Oded Gabbay
Quoted 101 lines · Oded Gabbay
Quoted 100 lines · Oded Gabbay
Quoted 97 lines · Oded Gabbay
Quoted 79 lines · Daniel Vetter
Quoted 38 lines · Jason Gunthorpe
Quoted 21 lines · Daniel Vetter
Quoted 20 lines · Oded Gabbay
Quoted 19 lines · Jason Gunthorpe
Quoted 16 lines · Daniel Vetter
Quoted 5 lines · Oded Gabbay

Hi,
Re-sending this patch-set following the release of our user-space TPC compiler and runtime library.

I would appreciate a review on this.

I think the big open we have is the entire revoke discussions. Having the option to let dma-buf hang around which map to random local memory ranges, without clear ownership link and a way to kill it sounds bad to me.

I think there's a few options:
- We require revoke support. But I've heard rdma really doesn't like that, I guess because taking out an MR while holding the dma_resv_lock would be an inversion, so can't be done. Jason, can you recap what exactly the hold-up was again that makes this a no-go?

Quoted 5 lines
Quoted 1 line
Quoted 1 line

RDMA HW can't do revoke.

Like why? I'm assuming when the final open handle or whatever for that MR is closed, you do clean up everything? Or does that MR still stick around forever too?

It is a combination of uAPI and HW specification.

revoke here means you take a MR object and tell it to stop doing DMA without causing the MR object to be destructed.

All the drivers can of course destruct the MR, but doing such a destruction without explicit synchronization with user space opens things up to a serious use-after potential that could be a security issue.

Quoted 6 lines

When the open handle closes the userspace is synchronized with the kernel and we can destruct the HW objects safely.

So, the special HW feature required is 'stop doing DMA but keep the object in an error state' which isn't really implemented, and doesn't extend very well to other object types beyond simple MRs.

Yeah revoke without destroying the MR doesn't work, and it sounds like revoke by destroying the MR just moves the can of worms around to another place.

Quoted 11 lines
Quoted 10 lines

1. User A opens gaudi device, sets up dma-buf export

2. User A registers that with RDMA, or anything else that doesn't support revoke.

3. User A closes gaudi device

4. User B opens gaudi device, assumes that it has full control over the device and uploads some secrets, which happen to end up in the dma-buf region user A set up

Quoted 8 lines

I would expect this is blocked so long as the DMABUF exists - eg the DMABUF will hold a fget on the FD of #1 until the DMABUF is closed, so that #3 can't actually happen.

Quoted 2 lines

It's not mlocked memory, it's mlocked memory and I can exfiltrate it.

That's just bug, don't make buggy drivers :)

Well yeah, but given that habanalabs hand rolled this I can't just check for the usual things we have to enforce this in drm. And generally you can just open chardevs arbitrarily, and multiple users fighting over each another. The troubles only start when you have private state or memory allocations of some kind attached to the struct file (instead of the underlying device), or something else that requires device exclusivity. There's no standard way to do that.

Quoted 8 lines

Plus in many cases you really want revoke on top (can't get that here unfortunately it seems), and the attempts to get towards a generic revoke() just never went anywhere. So again it's all hand-rolled per-subsystem. *insert lament about us not having done this through a proper subsystem*

Anyway it sounds like the code takes care of that. -Daniel

Daniel, Jason,
Thanks for reviewing this code.

Can I get an R-B / A-B from you for this patch-set ?

Thanks,
Oded

Quoted 8 lines
Quoted 4 lines

A kind reminder.

Thanks,
Oded

Hi,
I know last week was LPC and maybe this got lost in the inbox, so I'm sending it again to make sure you got my request for R-B / A-B.

I was waiting for some clarity from the maintainers summit, but that's still about as unclear as it gets. Either way technically it sounds ok, but I'm a bit burried so didn't look at the code.

But looking beyond the strict lens of dma-buf I'm still impressed by the mess this created, to get to the same endpoint of "we open our stack" in the same time it takes others to sort this out. I'm still looking for some kind of plan to fix this.

Also you probably want to get Dave to ack this too, I pinged him on irc last week about this after maintainer summit.
-Daniel

Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
#7 lore raw

Re: [PATCH v6 2/2] habanalabs: add support for dma-buf exporter

In reply to Oded Gabbay
Quoted 285 lines · Oded Gabbay
Quoted 7 lines · Jason Gunthorpe
Quoted 5 lines · Oded Gabbay

From: Tomer Tayar <[email protected]>

Implement the calls to the dma-buf kernel api to create a dma-buf object backed by FD.

Quoted 8 lines
Quoted 2 lines

We block the option to mmap the DMA-BUF object because we don't support DIRECT_IO and implicit P2P.

This statement doesn't make sense, you can mmap your dmabuf if you like. All dmabuf mmaps are supposed to set the special bit/etc to exclude them from get_user_pages() anyhow - and since this is BAR memory not struct page memory this driver would be doing it anyhow.

But we block mmap the dmabuf fd from user-space.
If you try to do it, you will get MAP_FAILED.
That's because we don't supply a function to the mmap callback in dmabuf. We did that per Christian's advice. It is in one of the long email threads on previous versions of this patch.

Quoted 5 lines
Quoted 2 lines

We check the p2p distance using pci_p2pdma_distance_many() and refusing to map dmabuf in case the distance doesn't allow p2p.

Does this actually allow the p2p transfer for your intended use cases?

It depends on the system. If we are working bare-metal, then yes, it allows. If inside a VM, then no. The virtualized root complex is not white-listed and the kernel can't know the distance.
But I remember you asked me to add this check, in v3 of the review IIRC. I don't mind removing this check if you don't object.

Quoted 18 lines
Quoted 18 lines
drivers/misc/habanalabs/common/memory.c +3 -1
index 33986933aa9e..8cf5437c0390 100644
+++ b/drivers/misc/habanalabs/common/memory.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 
 /*
- * Copyright 2016-2019 HabanaLabs, Ltd.
+ * Copyright 2016-2021 HabanaLabs, Ltd.
  * All Rights Reserved.
  */
 
@@ -11,11 +11,13 @@
 
 #include <linux/uaccess.h>
 #include <linux/slab.h>
+#include <linux/pci-p2pdma.h>
 
Quoted 8 lines

drivers/misc/habanalabs/common/memory.c line 20

Quoted 6 lines
drivers/misc/habanalabs/common/memory.c +2 -1
 #define HL_MMU_DEBUG 0
 
 /* use small pages for supporting non-pow2 (32M/40M/48M) DRAM phys page sizes */
-#define DRAM_POOL_PAGE_SIZE SZ_8M
+#define DRAM_POOL_PAGE_SIZE          SZ_8M
+

??

ok, I 'll remove

Quoted 7 lines
Quoted 7 lines
drivers/misc/habanalabs/common/memory.c +0 -0
 /*
  * The va ranges in context object contain a list with the available chunks of
@@ -347,6 +349,13 @@ static int free_device_memory(struct hl_ctx *ctx, struct hl_mem_in *args)
                      return -EINVAL;
              }
 
Quoted 6 lines

drivers/misc/habanalabs/common/memory.c static int free_device_memory(struct hl_ctx *ctx, struct hl_mem_in *args) · line 355

Quoted 4 lines
drivers/misc/habanalabs/common/memory.c +4 -0
+             if (phys_pg_pack->exporting_cnt) {
+                     dev_err(hdev->dev,
+                             "handle %u is exported, cannot free\n", handle);
+                     spin_unlock(&vm->idr_lock);

Don't write to the kernel log from user space triggered actions

at all ?
It's the first time I hear about this limitation...
How do you tell the user it has done something wrong ? I agree it might be better to rate limit it, but why not give the information to the user ?

Quoted 8 lines

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1522

Quoted 6 lines
drivers/misc/habanalabs/common/memory.c +5 -0
+static int alloc_sgt_from_device_pages(struct hl_device *hdev,
+                                     struct sg_table **sgt, u64 *pages,
+                                     u64 npages, u64 page_size,
+                                     struct device *dev,
+                                     enum dma_data_direction dir)

Why doesn't this return a sg_table * and an ERR_PTR?

Basically I modeled this function after amdgpu_vram_mgr_alloc_sgt() And in that function they also return int and pass the sg_table as **

If it's critical I can change.

Quoted 52 lines
Quoted 52 lines
drivers/misc/habanalabs/common/memory.c +50 -0
+{
+     u64 chunk_size, bar_address, dma_max_seg_size;
+     struct asic_fixed_properties *prop;
+     int rc, i, j, nents, cur_page;
+     struct scatterlist *sg;
+
+     prop = &hdev->asic_prop;
+
+     dma_max_seg_size = dma_get_max_seg_size(dev);
 
+
+     /* We would like to align the max segment size to PAGE_SIZE, so the
+      * SGL will contain aligned addresses that can be easily mapped to
+      * an MMU
+      */
+     dma_max_seg_size = ALIGN_DOWN(dma_max_seg_size, PAGE_SIZE);
+     if (dma_max_seg_size < PAGE_SIZE) {
+             dev_err_ratelimited(hdev->dev,
+                             "dma_max_seg_size %llu can't be smaller than PAGE_SIZE\n",
+                             dma_max_seg_size);
+             return -EINVAL;
+     }
+
+     *sgt = kzalloc(sizeof(**sgt), GFP_KERNEL);
+     if (!*sgt)
+             return -ENOMEM;
+
+     /* If the size of each page is larger than the dma max segment size,
+      * then we can't combine pages and the number of entries in the SGL
+      * will just be the
+      * <number of pages> * <chunks of max segment size in each page>
+      */
+     if (page_size > dma_max_seg_size)
+             nents = npages * DIV_ROUND_UP_ULL(page_size, dma_max_seg_size);
+     else
+             /* Get number of non-contiguous chunks */
+             for (i = 1, nents = 1, chunk_size = page_size ; i < npages ; i++) {
+                     if (pages[i - 1] + page_size != pages[i] ||
+                                     chunk_size + page_size > dma_max_seg_size) {
+                             nents++;
+                             chunk_size = page_size;
+                             continue;
+                     }
+
+                     chunk_size += page_size;
+             }
+
+     rc = sg_alloc_table(*sgt, nents, GFP_KERNEL | __GFP_ZERO);
+     if (rc)
+             goto error_free;
+
Quoted 8 lines

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1578

Quoted 6 lines
drivers/misc/habanalabs/common/memory.c +6 -0
+     /* Because we are not going to include a CPU list we want to have some
+      * chance that other users will detect this by setting the orig_nents
+      * to 0 and using only nents (length of DMA list) when going over the
+      * sgl
+      */
+     (*sgt)->orig_nents = 0;

Maybe do this at the end so you'd have to undo it on the error path?

Agreed, less code

Quoted 61 lines
Quoted 45 lines
drivers/misc/habanalabs/common/memory.c +44 -0
+     cur_page = 0;
+
+     if (page_size > dma_max_seg_size) {
+             u64 size_left, cur_device_address = 0;
+
+             size_left = page_size;
+
+             /* Need to split each page into the number of chunks of
+              * dma_max_seg_size
+              */
+             for_each_sgtable_dma_sg((*sgt), sg, i) {
+                     if (size_left == page_size)
+                             cur_device_address =
+                                     pages[cur_page] - prop->dram_base_address;
+                     else
+                             cur_device_address += dma_max_seg_size;
+
+                     chunk_size = min(size_left, dma_max_seg_size);
+
+                     bar_address = hdev->dram_pci_bar_start + cur_device_address;
+
+                     rc = set_dma_sg(sg, bar_address, chunk_size, dev, dir);
+                     if (rc)
+                             goto error_unmap;
+
+                     if (size_left > dma_max_seg_size) {
+                             size_left -= dma_max_seg_size;
+                     } else {
+                             cur_page++;
+                             size_left = page_size;
+                     }
+             }
+     } else {
+             /* Merge pages and put them into the scatterlist */
+             for_each_sgtable_dma_sg((*sgt), sg, i) {
+                     chunk_size = page_size;
+                     for (j = cur_page + 1 ; j < npages ; j++) {
+                             if (pages[j - 1] + page_size != pages[j] ||
+                                             chunk_size + page_size > dma_max_seg_size)
+                                     break;
+
+                             chunk_size += page_size;
+                     }
+

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1633

Quoted 10 lines
drivers/misc/habanalabs/common/memory.c +10 -0
+                     bar_address = hdev->dram_pci_bar_start +
+                                     (pages[cur_page] - prop->dram_base_address);
+
+                     rc = set_dma_sg(sg, bar_address, chunk_size, dev, dir);
+                     if (rc)
+                             goto error_unmap;
+
+                     cur_page = j;
+             }
+     }

We have this sg_append stuff now that is intended to help building these things. It can only build CPU page lists, not these DMA lists, but I do wonder if open coding in drivers is slipping back a bit. Especially since AMD seems to be doing something different.

Quoted 3 lines

Could the DMABUF layer gain some helpers styled after the sg_append to simplify building these things? and convert the AMD driver of course.

I will take it as a task to do in the near future, but I prefer to first upstream these patches as-is,
because I don't have a way to check AMD devices and I guess converting them might take some time.

Quoted 33 lines
Quoted 4 lines
drivers/misc/habanalabs/common/memory.c +4 -0
+static int hl_dmabuf_attach(struct dma_buf *dmabuf,
+                             struct dma_buf_attachment *attachment)
+{
+     struct hl_dmabuf_wrapper *hl_dmabuf;

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1669

Quoted 10 lines
drivers/misc/habanalabs/common/memory.c +10 -0
+     struct hl_device *hdev;
+     int rc;
+
+     hl_dmabuf = dmabuf->priv;
+     hdev = hl_dmabuf->ctx->hdev;
+
+     rc = pci_p2pdma_distance_many(hdev->pdev, &attachment->dev, 1, true);
+
+     if (rc < 0)
+             attachment->peer2peer = false;

Extra blank line

Quoted 16 lines
drivers/misc/habanalabs/common/memory.c +16 -0
+
+     return 0;
+}
+
+static struct sg_table *hl_map_dmabuf(struct dma_buf_attachment *attachment,
+                                     enum dma_data_direction dir)
+{
+     struct dma_buf *dma_buf = attachment->dmabuf;
+     struct hl_vm_phys_pg_pack *phys_pg_pack;
+     struct hl_dmabuf_wrapper *hl_dmabuf;
+     struct hl_device *hdev;
+     struct sg_table *sgt;
+     int rc;
+
+     hl_dmabuf = dma_buf->priv;
+     hdev = hl_dmabuf->ctx->hdev;
Quoted 8 lines

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1691

Quoted 6 lines
drivers/misc/habanalabs/common/memory.c +6 -0
+     phys_pg_pack = hl_dmabuf->phys_pg_pack;
+
+     if (!attachment->peer2peer) {
+             dev_err(hdev->dev,
+                     "Failed to map dmabuf because p2p is disabled\n");
+             return ERR_PTR(-EPERM);

User triggered printable again?

But how will the user know what the reason for the failure is ?

Quoted 15 lines

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1729

Quoted 12 lines
drivers/misc/habanalabs/common/memory.c +11 -0
+static void hl_unmap_dmabuf(struct dma_buf_attachment *attachment,
+                               struct sg_table *sgt,
+                               enum dma_data_direction dir)
+{
+     struct scatterlist *sg;
+     int i;
+
+     for_each_sgtable_dma_sg(sgt, sg, i)
+             dma_unmap_resource(attachment->dev, sg_dma_address(sg),
+                                     sg_dma_len(sg), dir,
+                                     DMA_ATTR_SKIP_CPU_SYNC);

Why can we skip the CPU_SYNC? Seems like a comment is needed

Quoted 2 lines

Something has to do a CPU_SYNC before recylcing this memory for another purpose, where is it?

Quoted 8 lines

I have to ask for further explanation here.
Same as before, this function is modeled after the amdgpu one - amdgpu_vram_mgr_free_sgt()
They also use CPU_SYNC in that function.
Christain, maybe you know ?

Maybe it is not relevant to our case as it represents a PCI bar ?

Hi Jason,
After reading the kernel iommu code, I think this is not relevant here, and I'll add a comment
appropriately but I'll also write it here, and please correct me if my understanding
is wrong.

The memory behind this specific dma-buf has *always* resided on the device itself, i.e. it lives
only in the 'device' domain (after all, it maps a PCI bar address which points to the device memory).
Therefore, it was never in the 'CPU' domain and hence, there is no need to perform a sync
of the memory to the CPU's cache, as it was never inside that cache to begin with.

This is not the same case as with regular memory which is dma-mapped and then copied
into the device using a dma engine. In that case, the memory started in the 'CPU' domain
and moved to the 'device' domain. When it is unmapped it will indeed be recycled to be
used for another purpose and therefore we need to sync the CPU cache.

Is my understanding correct ?

Thanks,
Oded

Quoted 105 lines
Quoted 6 lines

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1739

Quoted 4 lines
drivers/misc/habanalabs/common/memory.c +3 -0
+static void hl_release_dmabuf(struct dma_buf *dmabuf)
+{
+     struct hl_dmabuf_wrapper *hl_dmabuf = dmabuf->priv;

Maybe hl_dmabuf_wrapper should be hl_dmabuf_priv

Agreed.

Quoted 73 lines
Quoted 50 lines

+ * export_dmabuf_from_addr() - export a dma-buf object for the given memory
+ * address and size.
+ * @ctx: pointer to the context structure.
+ * @device_addr: device memory physical address.
+ * @size: size of device memory.
+ * @flags: DMA-BUF file/FD flags.
+ * @dmabuf_fd: pointer to result FD that represents the dma-buf object.
+ *
+ * Create and export a dma-buf object for an existing memory allocation inside
+ * the device memory, and return a FD which is associated with the dma-buf
+ * object.
+ *
+ * Return: 0 on success, non-zero for failure.
+ */

drivers/misc/habanalabs/common/memory.c +35 -0
+static int export_dmabuf_from_addr(struct hl_ctx *ctx, u64 device_addr,
+                                     u64 size, int flags, int *dmabuf_fd)
+{
+     struct hl_dmabuf_wrapper *hl_dmabuf;
+     struct hl_device *hdev = ctx->hdev;
+     struct asic_fixed_properties *prop;
+     u64 bar_address;
+     int rc;
+
+     prop = &hdev->asic_prop;
+
+     if (!IS_ALIGNED(device_addr, PAGE_SIZE)) {
+             dev_err_ratelimited(hdev->dev,
+                     "address of exported device memory should be aligned to 0x%lx, address 0x%llx\n",
+                     PAGE_SIZE, device_addr);
+             return -EINVAL;
+     }
+
+     if (size < PAGE_SIZE) {
+             dev_err_ratelimited(hdev->dev,
+                     "size %llu of exported device memory should be equal to or greater than %lu\n",
+                     size, PAGE_SIZE);
+             return -EINVAL;
+     }
+
+     if (device_addr < prop->dram_user_base_address ||
+                             device_addr + size > prop->dram_end_address ||
+                             device_addr + size < device_addr) {
+             dev_err_ratelimited(hdev->dev,
+                     "DRAM memory range is outside of DRAM boundaries, address 0x%llx, size 0x%llx\n",
+                     device_addr, size);
+             return -EINVAL;
+     }
+
+     bar_address = hdev->dram_pci_bar_start +

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1860

Quoted 10 lines
drivers/misc/habanalabs/common/memory.c +10 -0
+                     (device_addr - prop->dram_base_address);
+
+     if (bar_address + size >
+                     hdev->dram_pci_bar_start + prop->dram_pci_bar_size ||
+                     bar_address + size < bar_address) {
+             dev_err_ratelimited(hdev->dev,
+                     "DRAM memory range is outside of PCI BAR boundaries, address 0x%llx, size 0x%llx\n",
+                     device_addr, size);
+             return -EINVAL;
+     }

More prints from userspace

Quoted 10 lines
drivers/misc/habanalabs/common/memory.c +10 -0
+static int export_dmabuf_from_handle(struct hl_ctx *ctx, u64 handle, int flags,
+                                     int *dmabuf_fd)
+{
+     struct hl_vm_phys_pg_pack *phys_pg_pack;
+     struct hl_dmabuf_wrapper *hl_dmabuf;
+     struct hl_device *hdev = ctx->hdev;
+     struct asic_fixed_properties *prop;
+     struct hl_vm *vm = &hdev->vm;
+     u64 bar_address;
+     u32 idr_handle;
Quoted 8 lines

drivers/misc/habanalabs/common/memory.c int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) · line 1907

Quoted 5 lines
drivers/misc/habanalabs/common/memory.c +5 -0
+     int rc, i;
+
+     prop = &hdev->asic_prop;
+
+     idr_handle = lower_32_bits(handle);

Why silent truncation? Shouldn't setting the upper 32 bits be an error?

Yes, you are correct. I will fix it.

Quoted 11 lines

drivers/misc/habanalabs/common/memory.c static int mem_ioctl_no_mmu(struct hl_fpriv *hpriv, union hl_mem_args *args) · line 2040

Quoted 9 lines
drivers/misc/habanalabs/common/memory.c +8 -0
+     case HL_MEM_OP_EXPORT_DMABUF_FD:
+             rc = export_dmabuf_from_addr(ctx,
+                             args->in.export_dmabuf_fd.handle,
+                             args->in.export_dmabuf_fd.mem_size,
+                             args->in.flags,
+                             &dmabuf_fd);
+             memset(args, 0, sizeof(*args));
+             args->out.fd = dmabuf_fd;

Would expect the installed fd to be the positive return, not a pointer

yeah, changed it to s32 as you suggested.

Quoted 2 lines

Jason

#9 lore raw

Re: [PATCH v6 2/2] habanalabs: add support for dma-buf exporter

In reply to Oded Gabbay
Quoted 11 lines · Oded Gabbay
Quoted 10 lines · Jason Gunthorpe
Quoted 7 lines · Oded Gabbay

From: Tomer Tayar <[email protected]>

Implement the calls to the dma-buf kernel api to create a dma-buf object backed by FD.

We block the option to mmap the DMA-BUF object because we don't support DIRECT_IO and implicit P2P.

Quoted 7 lines
Quoted 5 lines

This statement doesn't make sense, you can mmap your dmabuf if you like. All dmabuf mmaps are supposed to set the special bit/etc to exclude them from get_user_pages() anyhow - and since this is BAR memory not struct page memory this driver would be doing it anyhow.

But we block mmap the dmabuf fd from user-space.
If you try to do it, you will get MAP_FAILED.

You do, I'm saying the above paragraph explaining *why* that was done is not correct.

Quoted 10 lines
Quoted 4 lines
Quoted 2 lines

We check the p2p distance using pci_p2pdma_distance_many() and refusing to map dmabuf in case the distance doesn't allow p2p.

Does this actually allow the p2p transfer for your intended use cases?

It depends on the system. If we are working bare-metal, then yes, it allows. If inside a VM, then no. The virtualized root complex is not white-listed and the kernel can't know the distance.
But I remember you asked me to add this check, in v3 of the review IIRC. I don't mind removing this check if you don't object.

Yes, i tis the right code, I was curious how far along things have gotten

Quoted 2 lines
Quoted 1 line

Don't write to the kernel log from user space triggered actions

at all ?

At all.

Quoted 1 line

It's the first time I hear about this limitation...

Oh? It is a security issue, we don't want to allow userspace to DOS the kerne logging.

Quoted 1 line

How do you tell the user it has done something wrong ?

dev_dbg is the usual way and then users doing debugging can opt in to the logging.

Quoted 5 lines
Quoted 1 line

Why doesn't this return a sg_table * and an ERR_PTR?

Basically I modeled this function after amdgpu_vram_mgr_alloc_sgt() And in that function they also return int and pass the sg_table as **

If it's critical I can change.

Please follow the normal kernel style

Jason

#8 lore raw

Re: [PATCH v6 2/2] habanalabs: add support for dma-buf exporter

In reply to Oded Gabbay
Quoted 11 lines · Oded Gabbay

After reading the kernel iommu code, I think this is not relevant here, and I'll add a comment appropriately but I'll also write it here, and please correct me if my understanding is wrong.

The memory behind this specific dma-buf has *always* resided on the device itself, i.e. it lives only in the 'device' domain (after all, it maps a PCI bar address which points to the device memory). Therefore, it was never in the 'CPU' domain and hence, there is no need to perform a sync of the memory to the CPU's cache, as it was never inside that cache to begin with.

Quoted 7 lines

This is not the same case as with regular memory which is dma-mapped and then copied into the device using a dma engine. In that case, the memory started in the 'CPU' domain and moved to the 'device' domain. When it is unmapped it will indeed be recycled to be used for another purpose and therefore we need to sync the CPU cache.

Is my understanding correct ?

It makes sense to me

Jason