Skip to contentSkip to conversation

5.10.65-rc1 review

PATCH In review Greg Kroah-Hartman 11 participants 250 messages Sep 13, 2021 – Sep 16, 2021 Page 1 of 2

Subsystems (2)
lore
Share & tools
lore
author maintainer
#13 lore raw

PATCH 13/236 hrtimer: Ensure timerfd notification for HIGHRES=n

In reply to Greg Kroah-Hartman

From: Thomas Gleixner <[email protected]>

[ Upstream commit 8c3b5e6ec0fee18bc2ce38d1dfe913413205f908 ]

If high resolution timers are disabled the timerfd notification about a clock was set event is not happening for all cases which use clock_was_set_delayed() because that's a NOP for HIGHRES=n, which is wrong.

Make clock_was_set_delayed() unconditially available to fix that.

---
 include/linux/hrtimer.h     |  5 -----
 kernel/time/hrtimer.c       | 32 ++++++++++++++++----------------
 kernel/time/tick-internal.h |  3 +++
 3 files changed, 19 insertions(+), 21 deletions(-)
include/linux/hrtimer.h +0 -5
index 107cedd7019a..7f1b8549ebce 100644
@@ -318,16 +318,12 @@ struct clock_event_device;
 
 extern void hrtimer_interrupt(struct clock_event_device *dev);
 
-extern void clock_was_set_delayed(void);
-
 extern unsigned int hrtimer_resolution;
 
 #else
 
 #define hrtimer_resolution	(unsigned int)LOW_RES_NSEC
 
-static inline void clock_was_set_delayed(void) { }
-
 #endif
 
 static inline ktime_t
@@ -351,7 +347,6 @@ hrtimer_expires_remaining_adjusted(const struct hrtimer *timer)
 						    timer->base->get_time());
 }
 
-extern void clock_was_set(void);
 #ifdef CONFIG_TIMERFD
 extern void timerfd_clock_was_set(void);
 #else
kernel/time/hrtimer.c +16 -16
index 4bdceb1ff069..4ef90718c114 100644
@@ -758,22 +758,6 @@ static void hrtimer_switch_to_hres(void)
 	retrigger_next_event(NULL);
 }
 
-static void clock_was_set_work(struct work_struct *work)
-{
-	clock_was_set();
-}
-
-static DECLARE_WORK(hrtimer_work, clock_was_set_work);
-
-/*
- * Called from timekeeping and resume code to reprogram the hrtimer
- * interrupt device on all cpus.
- */
-void clock_was_set_delayed(void)
-{
-	schedule_work(&hrtimer_work);
-}
-
 #else
 
 static inline int hrtimer_is_hres_enabled(void) { return 0; }
@@ -891,6 +875,22 @@ void clock_was_set(void)
 	timerfd_clock_was_set();
 }
 
+static void clock_was_set_work(struct work_struct *work)
+{
+	clock_was_set();
+}
+
+static DECLARE_WORK(hrtimer_work, clock_was_set_work);
+
+/*
+ * Called from timekeeping and resume code to reprogram the hrtimer
+ * interrupt device on all cpus and to notify timerfd.
+ */
+void clock_was_set_delayed(void)
+{
+	schedule_work(&hrtimer_work);
+}
+
 /*
  * During resume we might have to reprogram the high resolution timer
  * interrupt on all online CPUs.  However, all other CPUs will be
kernel/time/tick-internal.h +3 -0
index 7b2496136729..5294f5b1f955 100644
@@ -165,3 +165,6 @@ DECLARE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases);
 
 extern u64 get_next_timer_interrupt(unsigned long basej, u64 basem);
 void timer_clear_idle(void);
+
+void clock_was_set(void);
+void clock_was_set_delayed(void);
Signature · 1 line
2.30.2
author maintainer
#12 lore raw

PATCH 12/236 hrtimer: Avoid double reprogramming in __hrtimer_start_range_ns()

In reply to Greg Kroah-Hartman

From: Thomas Gleixner <[email protected]>

[ Upstream commit 627ef5ae2df8eeccb20d5af0e4cfa4df9e61ed28 ]

If __hrtimer_start_range_ns() is invoked with an already armed hrtimer then the timer has to be canceled first and then added back. If the timer is the first expiring timer then on removal the clockevent device is reprogrammed to the next expiring timer to avoid that the pending expiry fires needlessly.

If the new expiry time ends up to be the first expiry again then the clock event device has to reprogrammed again.

Avoid this by checking whether the timer is the first to expire and in that case, keep the timer on the current CPU and delay the reprogramming up to the point where the timer has been enqueued again.

---
 kernel/time/hrtimer.c | 60 ++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 53 insertions(+), 7 deletions(-)
kernel/time/hrtimer.c +53 -7
index 9505b1f21cdf..4bdceb1ff069 100644
@@ -1030,12 +1030,13 @@ static void __remove_hrtimer(struct hrtimer *timer,
  * remove hrtimer, called with base lock held
  */
 static inline int
-remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, bool restart)
+remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base,
+	       bool restart, bool keep_local)
 {
 	u8 state = timer->state;
 
 	if (state & HRTIMER_STATE_ENQUEUED) {
-		int reprogram;
+		bool reprogram;
 
 		/*
 		 * Remove the timer and force reprogramming when high
@@ -1048,8 +1049,16 @@ remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, bool rest
 		debug_deactivate(timer);
 		reprogram = base->cpu_base == this_cpu_ptr(&hrtimer_bases);
 
+		/*
+		 * If the timer is not restarted then reprogramming is
+		 * required if the timer is local. If it is local and about
+		 * to be restarted, avoid programming it twice (on removal
+		 * and a moment later when it's requeued).
+		 */
 		if (!restart)
 			state = HRTIMER_STATE_INACTIVE;
+		else
+			reprogram &= !keep_local;
 
 		__remove_hrtimer(timer, base, state, reprogram);
 		return 1;
@@ -1103,9 +1112,31 @@ static int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
 				    struct hrtimer_clock_base *base)
 {
 	struct hrtimer_clock_base *new_base;
+	bool force_local, first;
 
-	/* Remove an active timer from the queue: */
-	remove_hrtimer(timer, base, true);
+	/*
+	 * If the timer is on the local cpu base and is the first expiring
+	 * timer then this might end up reprogramming the hardware twice
+	 * (on removal and on enqueue). To avoid that by prevent the
+	 * reprogram on removal, keep the timer local to the current CPU
+	 * and enforce reprogramming after it is queued no matter whether
+	 * it is the new first expiring timer again or not.
+	 */
+	force_local = base->cpu_base == this_cpu_ptr(&hrtimer_bases);
+	force_local &= base->cpu_base->next_timer == timer;
+
+	/*
+	 * Remove an active timer from the queue. In case it is not queued
+	 * on the current CPU, make sure that remove_hrtimer() updates the
+	 * remote data correctly.
+	 *
+	 * If it's on the current CPU and the first expiring timer, then
+	 * skip reprogramming, keep the timer local and enforce
+	 * reprogramming later if it was the first expiring timer.  This
+	 * avoids programming the underlying clock event twice (once at
+	 * removal and once after enqueue).
+	 */
+	remove_hrtimer(timer, base, true, force_local);
 
 	if (mode & HRTIMER_MODE_REL)
 		tim = ktime_add_safe(tim, base->get_time());
@@ -1115,9 +1146,24 @@ static int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
 	hrtimer_set_expires_range_ns(timer, tim, delta_ns);
 
 	/* Switch the timer base, if necessary: */
-	new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED);
+	if (!force_local) {
+		new_base = switch_hrtimer_base(timer, base,
+					       mode & HRTIMER_MODE_PINNED);
+	} else {
+		new_base = base;
+	}
+
+	first = enqueue_hrtimer(timer, new_base, mode);
+	if (!force_local)
+		return first;
 
-	return enqueue_hrtimer(timer, new_base, mode);
+	/*
+	 * Timer was forced to stay on the current CPU to avoid
+	 * reprogramming on removal and enqueue. Force reprogram the
+	 * hardware by evaluating the new first expiring timer.
+	 */
+	hrtimer_force_reprogram(new_base->cpu_base, 1);
+	return 0;
 }
 
 /**
@@ -1183,7 +1229,7 @@ int hrtimer_try_to_cancel(struct hrtimer *timer)
 	base = lock_hrtimer_base(timer, &flags);
 
 	if (!hrtimer_callback_running(timer))
-		ret = remove_hrtimer(timer, base, false);
+		ret = remove_hrtimer(timer, base, false, false);
 
 	unlock_hrtimer_base(timer, &flags);
 
Signature · 1 line
2.30.2
author maintainer
#16 lore raw

PATCH 16/236 isofs: joliet: Fix iocharset=utf8 mount option

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

[ Upstream commit 28ce50f8d96ec9035f60c9348294ea26b94db944 ]

Currently iocharset=utf8 mount option is broken. To use UTF-8 as iocharset, it is required to use utf8 mount option.

Fix iocharset=utf8 mount option to use be equivalent to the utf8 mount option.

If UTF-8 as iocharset is used then s_nls_iocharset is set to NULL. So simplify code around, remove s_utf8 field as to distinguish between UTF-8 and non-UTF-8 it is needed just to check if s_nls_iocharset is set to NULL or not.

---
 fs/isofs/inode.c  | 27 +++++++++++++--------------
 fs/isofs/isofs.h  |  1 -
 fs/isofs/joliet.c |  4 +---
 3 files changed, 14 insertions(+), 18 deletions(-)
fs/isofs/inode.c +13 -14
index ec90773527ee..35675a1065be 100644
@@ -155,7 +155,6 @@ struct iso9660_options{
 	unsigned int overriderockperm:1;
 	unsigned int uid_set:1;
 	unsigned int gid_set:1;
-	unsigned int utf8:1;
 	unsigned char map;
 	unsigned char check;
 	unsigned int blocksize;
@@ -355,7 +354,6 @@ static int parse_options(char *options, struct iso9660_options *popt)
 	popt->gid = GLOBAL_ROOT_GID;
 	popt->uid = GLOBAL_ROOT_UID;
 	popt->iocharset = NULL;
-	popt->utf8 = 0;
 	popt->overriderockperm = 0;
 	popt->session=-1;
 	popt->sbsector=-1;
@@ -388,10 +386,13 @@ static int parse_options(char *options, struct iso9660_options *popt)
 		case Opt_cruft:
 			popt->cruft = 1;
 			break;
+#ifdef CONFIG_JOLIET
 		case Opt_utf8:
-			popt->utf8 = 1;
+			kfree(popt->iocharset);
+			popt->iocharset = kstrdup("utf8", GFP_KERNEL);
+			if (!popt->iocharset)
+				return 0;
 			break;
-#ifdef CONFIG_JOLIET
 		case Opt_iocharset:
 			kfree(popt->iocharset);
 			popt->iocharset = match_strdup(&args[0]);
@@ -494,7 +495,6 @@ static int isofs_show_options(struct seq_file *m, struct dentry *root)
 	if (sbi->s_nocompress)		seq_puts(m, ",nocompress");
 	if (sbi->s_overriderockperm)	seq_puts(m, ",overriderockperm");
 	if (sbi->s_showassoc)		seq_puts(m, ",showassoc");
-	if (sbi->s_utf8)		seq_puts(m, ",utf8");
 
 	if (sbi->s_check)		seq_printf(m, ",check=%c", sbi->s_check);
 	if (sbi->s_mapping)		seq_printf(m, ",map=%c", sbi->s_mapping);
@@ -517,9 +517,10 @@ static int isofs_show_options(struct seq_file *m, struct dentry *root)
 		seq_printf(m, ",fmode=%o", sbi->s_fmode);
 
 #ifdef CONFIG_JOLIET
-	if (sbi->s_nls_iocharset &&
-	    strcmp(sbi->s_nls_iocharset->charset, CONFIG_NLS_DEFAULT) != 0)
+	if (sbi->s_nls_iocharset)
 		seq_printf(m, ",iocharset=%s", sbi->s_nls_iocharset->charset);
+	else
+		seq_puts(m, ",iocharset=utf8");
 #endif
 	return 0;
 }
@@ -862,14 +863,13 @@ root_found:
 	sbi->s_nls_iocharset = NULL;
 
 #ifdef CONFIG_JOLIET
-	if (joliet_level && opt.utf8 == 0) {
+	if (joliet_level) {
 		char *p = opt.iocharset ? opt.iocharset : CONFIG_NLS_DEFAULT;
-		sbi->s_nls_iocharset = load_nls(p);
-		if (! sbi->s_nls_iocharset) {
-			/* Fail only if explicit charset specified */
-			if (opt.iocharset)
+		if (strcmp(p, "utf8") != 0) {
+			sbi->s_nls_iocharset = opt.iocharset ?
+				load_nls(opt.iocharset) : load_nls_default();
+			if (!sbi->s_nls_iocharset)
 				goto out_freesbi;
-			sbi->s_nls_iocharset = load_nls_default();
 		}
 	}
 #endif
@@ -885,7 +885,6 @@ root_found:
 	sbi->s_gid = opt.gid;
 	sbi->s_uid_set = opt.uid_set;
 	sbi->s_gid_set = opt.gid_set;
-	sbi->s_utf8 = opt.utf8;
 	sbi->s_nocompress = opt.nocompress;
 	sbi->s_overriderockperm = opt.overriderockperm;
 	/*
fs/isofs/isofs.h +0 -1
index 055ec6c586f7..dcdc191ed183 100644
@@ -44,7 +44,6 @@ struct isofs_sb_info {
 	unsigned char s_session;
 	unsigned int  s_high_sierra:1;
 	unsigned int  s_rock:2;
-	unsigned int  s_utf8:1;
 	unsigned int  s_cruft:1; /* Broken disks with high byte of length
 				  * containing junk */
 	unsigned int  s_nocompress:1;
fs/isofs/joliet.c +1 -3
index be8b6a9d0b92..c0f04a1e7f69 100644
@@ -41,14 +41,12 @@ uni16_to_x8(unsigned char *ascii, __be16 *uni, int len, struct nls_table *nls)
 int
 get_joliet_filename(struct iso_directory_record * de, unsigned char *outname, struct inode * inode)
 {
-	unsigned char utf8;
 	struct nls_table *nls;
 	unsigned char len = 0;
 
-	utf8 = ISOFS_SB(inode->i_sb)->s_utf8;
 	nls = ISOFS_SB(inode->i_sb)->s_nls_iocharset;
 
-	if (utf8) {
+	if (!nls) {
 		len = utf16s_to_utf8s((const wchar_t *) de->name,
 				de->name_len[0] >> 1, UTF16_BIG_ENDIAN,
 				outname, PAGE_SIZE);
Signature · 1 line
2.30.2
author maintainer
#18 lore raw

PATCH 18/236 blk-throtl: optimize IOPS throttle for large IO scenarios

In reply to Greg Kroah-Hartman

From: Chunguang Xu <[email protected]>

[ Upstream commit 4f1e9630afe6332de7286820fedd019f19eac057 ]

After patch 54efd50 (block: make generic_make_request handle arbitrarily sized bios), the IO through io-throttle may be larger, and these IOs may be further split into more small IOs. However, IOPS throttle does not seem to be aware of this change, which makes the calculation of IOPS of large IOs incomplete, resulting in disk-side IOPS that does not meet expectations. Maybe we should fix this problem.

We can reproduce it by set max_sectors_kb of disk to 128, set blkio.write_iops_throttle to 100, run a dd instance inside blkio and use iostat to watch IOPS:

dd if=/dev/zero of=/dev/sdb bs=1M count=1000 oflag=direct

As a result, without this change the average IOPS is 1995, with this change the IOPS is 98.

---
 block/blk-merge.c    |  2 ++
 block/blk-throttle.c | 32 ++++++++++++++++++++++++++++++++
 block/blk.h          |  2 ++
 3 files changed, 36 insertions(+)
block/blk-merge.c +2 -0
index 349cd7d3af81..110db636d230 100644
@@ -341,6 +341,8 @@ void __blk_queue_split(struct bio **bio, unsigned int *nr_segs)
 		trace_block_split(q, split, (*bio)->bi_iter.bi_sector);
 		submit_bio_noacct(*bio);
 		*bio = split;
+
+		blk_throtl_charge_bio_split(*bio);
 	}
 }
 
block/blk-throttle.c +32 -0
index b771c4299982..63e9d00a0832 100644
@@ -178,6 +178,9 @@ struct throtl_grp {
 	unsigned int bad_bio_cnt; /* bios exceeding latency threshold */
 	unsigned long bio_cnt_reset_time;
 
+	atomic_t io_split_cnt[2];
+	atomic_t last_io_split_cnt[2];
+
 	struct blkg_rwstat stat_bytes;
 	struct blkg_rwstat stat_ios;
 };
@@ -771,6 +774,8 @@ static inline void throtl_start_new_slice_with_credit(struct throtl_grp *tg,
 	tg->bytes_disp[rw] = 0;
 	tg->io_disp[rw] = 0;
 
+	atomic_set(&tg->io_split_cnt[rw], 0);
+
 	/*
 	 * Previous slice has expired. We must have trimmed it after last
 	 * bio dispatch. That means since start of last slice, we never used
@@ -793,6 +798,9 @@ static inline void throtl_start_new_slice(struct throtl_grp *tg, bool rw)
 	tg->io_disp[rw] = 0;
 	tg->slice_start[rw] = jiffies;
 	tg->slice_end[rw] = jiffies + tg->td->throtl_slice;
+
+	atomic_set(&tg->io_split_cnt[rw], 0);
+
 	throtl_log(&tg->service_queue,
 		   "[%c] new slice start=%lu end=%lu jiffies=%lu",
 		   rw == READ ? 'R' : 'W', tg->slice_start[rw],
@@ -1025,6 +1033,9 @@ static bool tg_may_dispatch(struct throtl_grp *tg, struct bio *bio,
 				jiffies + tg->td->throtl_slice);
 	}
 
+	if (iops_limit != UINT_MAX)
+		tg->io_disp[rw] += atomic_xchg(&tg->io_split_cnt[rw], 0);
+
 	if (tg_with_in_bps_limit(tg, bio, bps_limit, &bps_wait) &&
 	    tg_with_in_iops_limit(tg, bio, iops_limit, &iops_wait)) {
 		if (wait)
@@ -2046,12 +2057,14 @@ static void throtl_downgrade_check(struct throtl_grp *tg)
 	}
 
 	if (tg->iops[READ][LIMIT_LOW]) {
+		tg->last_io_disp[READ] += atomic_xchg(&tg->last_io_split_cnt[READ], 0);
 		iops = tg->last_io_disp[READ] * HZ / elapsed_time;
 		if (iops >= tg->iops[READ][LIMIT_LOW])
 			tg->last_low_overflow_time[READ] = now;
 	}
 
 	if (tg->iops[WRITE][LIMIT_LOW]) {
+		tg->last_io_disp[WRITE] += atomic_xchg(&tg->last_io_split_cnt[WRITE], 0);
 		iops = tg->last_io_disp[WRITE] * HZ / elapsed_time;
 		if (iops >= tg->iops[WRITE][LIMIT_LOW])
 			tg->last_low_overflow_time[WRITE] = now;
@@ -2170,6 +2183,25 @@ static inline void throtl_update_latency_buckets(struct throtl_data *td)
 }
 #endif
 
+void blk_throtl_charge_bio_split(struct bio *bio)
+{
+	struct blkcg_gq *blkg = bio->bi_blkg;
+	struct throtl_grp *parent = blkg_to_tg(blkg);
+	struct throtl_service_queue *parent_sq;
+	bool rw = bio_data_dir(bio);
+
+	do {
+		if (!parent->has_rules[rw])
+			break;
+
+		atomic_inc(&parent->io_split_cnt[rw]);
+		atomic_inc(&parent->last_io_split_cnt[rw]);
+
+		parent_sq = parent->service_queue.parent_sq;
+		parent = sq_to_tg(parent_sq);
+	} while (parent);
+}
+
 bool blk_throtl_bio(struct bio *bio)
 {
 	struct request_queue *q = bio->bi_disk->queue;
block/blk.h +2 -0
index ecfd523c68d0..f84c83300f6f 100644
@@ -299,11 +299,13 @@ int create_task_io_context(struct task_struct *task, gfp_t gfp_mask, int node);
 extern int blk_throtl_init(struct request_queue *q);
 extern void blk_throtl_exit(struct request_queue *q);
 extern void blk_throtl_register_queue(struct request_queue *q);
+extern void blk_throtl_charge_bio_split(struct bio *bio);
 bool blk_throtl_bio(struct bio *bio);
 #else /* CONFIG_BLK_DEV_THROTTLING */
 static inline int blk_throtl_init(struct request_queue *q) { return 0; }
 static inline void blk_throtl_exit(struct request_queue *q) { }
 static inline void blk_throtl_register_queue(struct request_queue *q) { }
+static inline void blk_throtl_charge_bio_split(struct bio *bio) { }
 static inline bool blk_throtl_bio(struct bio *bio) { return false; }
 #endif /* CONFIG_BLK_DEV_THROTTLING */
 #ifdef CONFIG_BLK_DEV_THROTTLING_LOW
Signature · 1 line
2.30.2
author maintainer
#2 lore raw

PATCH 2/236 regmap: fix the offset of register error log

In reply to Greg Kroah-Hartman

From: Jeongtae Park <[email protected]>

[ Upstream commit 1852f5ed358147095297a09cc3c6f160208a676d ]

This patch fixes the offset of register error log
by using regmap_get_offset().

---
 drivers/base/regmap/regmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/base/regmap/regmap.c +1 -1
index 5db536ccfcd6..456a1787e18d 100644
@@ -1652,7 +1652,7 @@ static int _regmap_raw_write_impl(struct regmap *map, unsigned int reg,
 			if (ret) {
 				dev_err(map->dev,
 					"Error in caching of register: %x ret: %d\n",
-					reg + i, ret);
+					reg + regmap_get_offset(map, i), ret);
 				return ret;
 			}
 		}
Signature · 1 line
2.30.2
author maintainer
#19 lore raw

PATCH 19/236 nvme-tcp: dont update queue count when failing to set io queues

In reply to Greg Kroah-Hartman

From: Ruozhu Li <[email protected]>

[ Upstream commit 664227fde63844d69e9ec9e90a8a7801e6ff072d ]

We update ctrl->queue_count and schedule another reconnect when io queue count is zero.But we will never try to create any io queue in next reco- nnection, because ctrl->queue_count already set to zero.We will end up having an admin-only session in Live state, which is exactly what we try to avoid in the original patch.
Update ctrl->queue_count after queue_count zero checking to fix it.

---
 drivers/nvme/host/tcp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/nvme/host/tcp.c +2 -2
index 82b2611d39a2..5b11d8a23813 100644
@@ -1755,13 +1755,13 @@ static int nvme_tcp_alloc_io_queues(struct nvme_ctrl *ctrl)
 	if (ret)
 		return ret;
 
-	ctrl->queue_count = nr_io_queues + 1;
-	if (ctrl->queue_count < 2) {
+	if (nr_io_queues == 0) {
 		dev_err(ctrl->device,
 			"unable to set any I/O queues\n");
 		return -ENOMEM;
 	}
 
+	ctrl->queue_count = nr_io_queues + 1;
 	dev_info(ctrl->device,
 		"creating %d I/O queues.\n", nr_io_queues);
 
Signature · 1 line
2.30.2
author maintainer
#20 lore raw

PATCH 20/236 nvme-rdma: dont update queue count when failing to set io queues

In reply to Greg Kroah-Hartman

From: Ruozhu Li <[email protected]>

[ Upstream commit 85032874f80ba17bf187de1d14d9603bf3f582b8 ]

We update ctrl->queue_count and schedule another reconnect when io queue count is zero.But we will never try to create any io queue in next reco- nnection, because ctrl->queue_count already set to zero.We will end up having an admin-only session in Live state, which is exactly what we try to avoid in the original patch.
Update ctrl->queue_count after queue_count zero checking to fix it.

---
 drivers/nvme/host/rdma.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/nvme/host/rdma.c +2 -2
index e6d58402b829..c6c2e2361b2f 100644
@@ -735,13 +735,13 @@ static int nvme_rdma_alloc_io_queues(struct nvme_rdma_ctrl *ctrl)
 	if (ret)
 		return ret;
 
-	ctrl->ctrl.queue_count = nr_io_queues + 1;
-	if (ctrl->ctrl.queue_count < 2) {
+	if (nr_io_queues == 0) {
 		dev_err(ctrl->ctrl.device,
 			"unable to set any I/O queues\n");
 		return -ENOMEM;
 	}
 
+	ctrl->ctrl.queue_count = nr_io_queues + 1;
 	dev_info(ctrl->ctrl.device,
 		"creating %d I/O queues.\n", nr_io_queues);
 
Signature · 1 line
2.30.2
author maintainer
#21 lore raw

PATCH 21/236 nvmet: pass back cntlid on successful completion

In reply to Greg Kroah-Hartman

From: Amit Engel <[email protected]>

[ Upstream commit e804d5abe2d74cfe23f5f83be580d1cdc9307111 ]

According to the NVMe specification, the response dword 0 value of the Connect command is based on status code: return cntlid for successful compeltion return IPO and IATTR for connect invalid parameters. Fix a missing error information for a zero sized queue, and return the cntlid also for I/O queue Connect commands.

---
 drivers/nvme/target/fabrics-cmd.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/nvme/target/fabrics-cmd.c +5 -4
index 42bd12b8bf00..e62d3d0fa6c8 100644
@@ -120,6 +120,7 @@ static u16 nvmet_install_queue(struct nvmet_ctrl *ctrl, struct nvmet_req *req)
 	if (!sqsize) {
 		pr_warn("queue size zero!\n");
 		req->error_loc = offsetof(struct nvmf_connect_command, sqsize);
+		req->cqe->result.u32 = IPO_IATTR_CONNECT_SQE(sqsize);
 		ret = NVME_SC_CONNECT_INVALID_PARAM | NVME_SC_DNR;
 		goto err;
 	}
@@ -263,11 +264,11 @@ static void nvmet_execute_io_connect(struct nvmet_req *req)
 	}
 
 	status = nvmet_install_queue(ctrl, req);
-	if (status) {
-		/* pass back cntlid that had the issue of installing queue */
-		req->cqe->result.u16 = cpu_to_le16(ctrl->cntlid);
+	if (status)
 		goto out_ctrl_put;
-	}
+
+	/* pass back cntlid for successful completion */
+	req->cqe->result.u16 = cpu_to_le16(ctrl->cntlid);
 
 	pr_debug("adding queue %d to ctrl %d.\n", qid, ctrl->cntlid);
 
Signature · 1 line
2.30.2
author maintainer
#23 lore raw

PATCH 23/236 power: supply: max17042_battery: fix typo in MAx17042_TOFF

In reply to Greg Kroah-Hartman

From: Sebastian Krzyszkowiak <[email protected]>

[ Upstream commit ed0d0a0506025f06061325cedae1bbebd081620a ]

---
 drivers/power/supply/max17042_battery.c | 2 +-
 include/linux/power/max17042_battery.h  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/power/supply/max17042_battery.c +1 -1
index 794caf03658d..48d3985eaa8a 100644
@@ -738,7 +738,7 @@ static inline void max17042_override_por_values(struct max17042_chip *chip)
 	struct max17042_config_data *config = chip->pdata->config_data;
 
 	max17042_override_por(map, MAX17042_TGAIN, config->tgain);
-	max17042_override_por(map, MAx17042_TOFF, config->toff);
+	max17042_override_por(map, MAX17042_TOFF, config->toff);
 	max17042_override_por(map, MAX17042_CGAIN, config->cgain);
 	max17042_override_por(map, MAX17042_COFF, config->coff);
 
include/linux/power/max17042_battery.h +1 -1
index d55c746ac56e..e00ad1cfb1f1 100644
@@ -69,7 +69,7 @@ enum max17042_register {
 	MAX17042_RelaxCFG	= 0x2A,
 	MAX17042_MiscCFG	= 0x2B,
 	MAX17042_TGAIN		= 0x2C,
-	MAx17042_TOFF		= 0x2D,
+	MAX17042_TOFF		= 0x2D,
 	MAX17042_CGAIN		= 0x2E,
 	MAX17042_COFF		= 0x2F,
 
Signature · 1 line
2.30.2
author maintainer
#1 lore raw

PATCH 1/236 locking/mutex: Fix HANDOFF condition

In reply to Greg Kroah-Hartman

From: Peter Zijlstra <[email protected]>

[ Upstream commit 048661a1f963e9517630f080687d48af79ed784c ]

Yanfei reported that setting HANDOFF should not depend on recomputing @first, only on @first state. Which would then give:

  if (ww_ctx || !first)
    first = __mutex_waiter_is_first(lock, &waiter);
  if (first)
    __mutex_set_flag(lock, MUTEX_FLAG_HANDOFF);

But because 'ww_ctx || !first' is basically 'always' and the test for first is relatively cheap, omit that first branch entirely.

---
 kernel/locking/mutex.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)
kernel/locking/mutex.c +5 -10
index 15ac7c4bb111..86061901636c 100644
@@ -938,7 +938,6 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
 		    struct ww_acquire_ctx *ww_ctx, const bool use_ww_ctx)
 {
 	struct mutex_waiter waiter;
-	bool first = false;
 	struct ww_mutex *ww;
 	int ret;
 
@@ -1017,6 +1016,8 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
 
 	set_current_state(state);
 	for (;;) {
+		bool first;
+
 		/*
 		 * Once we hold wait_lock, we're serialized against
 		 * mutex_unlock() handing the lock off to us, do a trylock
@@ -1045,15 +1046,9 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
 		spin_unlock(&lock->wait_lock);
 		schedule_preempt_disabled();
 
-		/*
-		 * ww_mutex needs to always recheck its position since its waiter
-		 * list is not FIFO ordered.
-		 */
-		if (ww_ctx || !first) {
-			first = __mutex_waiter_is_first(lock, &waiter);
-			if (first)
-				__mutex_set_flag(lock, MUTEX_FLAG_HANDOFF);
-		}
+		first = __mutex_waiter_is_first(lock, &waiter);
+		if (first)
+			__mutex_set_flag(lock, MUTEX_FLAG_HANDOFF);
 
 		set_current_state(state);
 		/*
Signature · 1 line
2.30.2
author maintainer
#11 lore raw

PATCH 11/236 posix-cpu-timers: Force next expiration recalc after itimer reset

In reply to Greg Kroah-Hartman

From: Frederic Weisbecker <[email protected]>

[ Upstream commit 406dd42bd1ba0c01babf9cde169bb319e52f6147 ]

When an itimer deactivates a previously armed expiration, it simply doesn't do anything. As a result the process wide cputime counter keeps running and the tick dependency stays set until it reaches the old ghost expiration value.

This can be reproduced with the following snippet:

	void trigger_process_counter(void)
	{
		struct itimerval n = {};

		n.it_value.tv_sec = 100;
		setitimer(ITIMER_VIRTUAL, &n, NULL);
		n.it_value.tv_sec = 0;
		setitimer(ITIMER_VIRTUAL, &n, NULL);
	}

Fix this with resetting the relevant base expiration. This is similar to disarming a timer.

---
 kernel/time/posix-cpu-timers.c | 2 --
 1 file changed, 2 deletions(-)
kernel/time/posix-cpu-timers.c +0 -2
index 08c033b80256..d3d42b7637a1 100644
@@ -1346,8 +1346,6 @@ void set_process_cpu_timer(struct task_struct *tsk, unsigned int clkid,
 			}
 		}
 
-		if (!*newval)
-			return;
 		*newval += now;
 	}
 
Signature · 1 line
2.30.2
author maintainer
#14 lore raw

PATCH 14/236 udf: Check LVID earlier

In reply to Greg Kroah-Hartman

From: Jan Kara <[email protected]>

[ Upstream commit 781d2a9a2fc7d0be53a072794dc03ef6de770f3d ]

We were checking validity of LVID entries only when getting implementation use information from LVID in udf_sb_lvidiu(). However if the LVID is suitably corrupted, it can cause problems also to code such as udf_count_free() which doesn't use udf_sb_lvidiu(). So check validity of LVID already when loading it from the disk and just disable LVID altogether when it is not valid.

---
 fs/udf/super.c | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)
fs/udf/super.c +16 -9
index d0df217f4712..a59bf469dd1c 100644
@@ -108,16 +108,10 @@ struct logicalVolIntegrityDescImpUse *udf_sb_lvidiu(struct super_block *sb)
 		return NULL;
 	lvid = (struct logicalVolIntegrityDesc *)UDF_SB(sb)->s_lvid_bh->b_data;
 	partnum = le32_to_cpu(lvid->numOfPartitions);
-	if ((sb->s_blocksize - sizeof(struct logicalVolIntegrityDescImpUse) -
-	     offsetof(struct logicalVolIntegrityDesc, impUse)) /
-	     (2 * sizeof(uint32_t)) < partnum) {
-		udf_err(sb, "Logical volume integrity descriptor corrupted "
-			"(numOfPartitions = %u)!\n", partnum);
-		return NULL;
-	}
 	/* The offset is to skip freeSpaceTable and sizeTable arrays */
 	offset = partnum * 2 * sizeof(uint32_t);
-	return (struct logicalVolIntegrityDescImpUse *)&(lvid->impUse[offset]);
+	return (struct logicalVolIntegrityDescImpUse *)
+					(((uint8_t *)(lvid + 1)) + offset);
 }
 
 /* UDF filesystem type */
@@ -1541,6 +1535,7 @@ static void udf_load_logicalvolint(struct super_block *sb, struct kernel_extent_
 	struct udf_sb_info *sbi = UDF_SB(sb);
 	struct logicalVolIntegrityDesc *lvid;
 	int indirections = 0;
+	u32 parts, impuselen;
 
 	while (++indirections <= UDF_MAX_LVID_NESTING) {
 		final_bh = NULL;
@@ -1567,15 +1562,27 @@ static void udf_load_logicalvolint(struct super_block *sb, struct kernel_extent_
 
 		lvid = (struct logicalVolIntegrityDesc *)final_bh->b_data;
 		if (lvid->nextIntegrityExt.extLength == 0)
-			return;
+			goto check;
 
 		loc = leea_to_cpu(lvid->nextIntegrityExt);
 	}
 
 	udf_warn(sb, "Too many LVID indirections (max %u), ignoring.\n",
 		UDF_MAX_LVID_NESTING);
+out_err:
 	brelse(sbi->s_lvid_bh);
 	sbi->s_lvid_bh = NULL;
+	return;
+check:
+	parts = le32_to_cpu(lvid->numOfPartitions);
+	impuselen = le32_to_cpu(lvid->lengthOfImpUse);
+	if (parts >= sb->s_blocksize || impuselen >= sb->s_blocksize ||
+	    sizeof(struct logicalVolIntegrityDesc) + impuselen +
+	    2 * parts * sizeof(u32) > sb->s_blocksize) {
+		udf_warn(sb, "Corrupted LVID (parts=%u, impuselen=%u), "
+			 "ignoring.\n", parts, impuselen);
+		goto out_err;
+	}
 }
 
 /*
Signature · 1 line
2.30.2
author maintainer
#15 lore raw

PATCH 15/236 udf: Fix iocharset=utf8 mount option

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

[ Upstream commit b645333443712d2613e4e863f81090d5dc509657 ]

Currently iocharset=utf8 mount option is broken. To use UTF-8 as iocharset, it is required to use utf8 mount option.

Fix iocharset=utf8 mount option to use be equivalent to the utf8 mount option.

If UTF-8 as iocharset is used then s_nls_map is set to NULL. So simplify code around, remove UDF_FLAG_NLS_MAP and UDF_FLAG_UTF8 flags as to distinguish between UTF-8 and non-UTF-8 it is needed just to check if s_nls_map set to NULL or not.

---
 fs/udf/super.c   | 50 ++++++++++++++++++------------------------------
 fs/udf/udf_sb.h  |  2 --
 fs/udf/unicode.c |  4 ++--
 3 files changed, 21 insertions(+), 35 deletions(-)
fs/udf/super.c +19 -31
index a59bf469dd1c..5d2b820ef303 100644
@@ -343,10 +343,10 @@ static int udf_show_options(struct seq_file *seq, struct dentry *root)
 		seq_printf(seq, ",lastblock=%u", sbi->s_last_block);
 	if (sbi->s_anchor != 0)
 		seq_printf(seq, ",anchor=%u", sbi->s_anchor);
-	if (UDF_QUERY_FLAG(sb, UDF_FLAG_UTF8))
-		seq_puts(seq, ",utf8");
-	if (UDF_QUERY_FLAG(sb, UDF_FLAG_NLS_MAP) && sbi->s_nls_map)
+	if (sbi->s_nls_map)
 		seq_printf(seq, ",iocharset=%s", sbi->s_nls_map->charset);
+	else
+		seq_puts(seq, ",iocharset=utf8");
 
 	return 0;
 }
@@ -551,19 +551,24 @@ static int udf_parse_options(char *options, struct udf_options *uopt,
 			/* Ignored (never implemented properly) */
 			break;
 		case Opt_utf8:
-			uopt->flags |= (1 << UDF_FLAG_UTF8);
+			if (!remount) {
+				unload_nls(uopt->nls_map);
+				uopt->nls_map = NULL;
+			}
 			break;
 		case Opt_iocharset:
 			if (!remount) {
-				if (uopt->nls_map)
-					unload_nls(uopt->nls_map);
-				/*
-				 * load_nls() failure is handled later in
-				 * udf_fill_super() after all options are
-				 * parsed.
-				 */
+				unload_nls(uopt->nls_map);
+				uopt->nls_map = NULL;
+			}
+			/* When nls_map is not loaded then UTF-8 is used */
+			if (!remount && strcmp(args[0].from, "utf8") != 0) {
 				uopt->nls_map = load_nls(args[0].from);
-				uopt->flags |= (1 << UDF_FLAG_NLS_MAP);
+				if (!uopt->nls_map) {
+					pr_err("iocharset %s not found\n",
+						args[0].from);
+					return 0;
+				}
 			}
 			break;
 		case Opt_uforget:
@@ -2145,21 +2150,6 @@ static int udf_fill_super(struct super_block *sb, void *options, int silent)
 	if (!udf_parse_options((char *)options, &uopt, false))
 		goto parse_options_failure;
 
-	if (uopt.flags & (1 << UDF_FLAG_UTF8) &&
-	    uopt.flags & (1 << UDF_FLAG_NLS_MAP)) {
-		udf_err(sb, "utf8 cannot be combined with iocharset\n");
-		goto parse_options_failure;
-	}
-	if ((uopt.flags & (1 << UDF_FLAG_NLS_MAP)) && !uopt.nls_map) {
-		uopt.nls_map = load_nls_default();
-		if (!uopt.nls_map)
-			uopt.flags &= ~(1 << UDF_FLAG_NLS_MAP);
-		else
-			udf_debug("Using default NLS map\n");
-	}
-	if (!(uopt.flags & (1 << UDF_FLAG_NLS_MAP)))
-		uopt.flags |= (1 << UDF_FLAG_UTF8);
-
 	fileset.logicalBlockNum = 0xFFFFFFFF;
 	fileset.partitionReferenceNum = 0xFFFF;
 
@@ -2314,8 +2304,7 @@ static int udf_fill_super(struct super_block *sb, void *options, int silent)
 error_out:
 	iput(sbi->s_vat_inode);
 parse_options_failure:
-	if (uopt.nls_map)
-		unload_nls(uopt.nls_map);
+	unload_nls(uopt.nls_map);
 	if (lvid_open)
 		udf_close_lvid(sb);
 	brelse(sbi->s_lvid_bh);
@@ -2365,8 +2354,7 @@ static void udf_put_super(struct super_block *sb)
 	sbi = UDF_SB(sb);
 
 	iput(sbi->s_vat_inode);
-	if (UDF_QUERY_FLAG(sb, UDF_FLAG_NLS_MAP))
-		unload_nls(sbi->s_nls_map);
+	unload_nls(sbi->s_nls_map);
 	if (!sb_rdonly(sb))
 		udf_close_lvid(sb);
 	brelse(sbi->s_lvid_bh);
fs/udf/udf_sb.h +0 -2
index 758efe557a19..4fa620543d30 100644
@@ -20,8 +20,6 @@
 #define UDF_FLAG_UNDELETE		6
 #define UDF_FLAG_UNHIDE			7
 #define UDF_FLAG_VARCONV		8
-#define UDF_FLAG_NLS_MAP		9
-#define UDF_FLAG_UTF8			10
 #define UDF_FLAG_UID_FORGET     11    /* save -1 for uid to disk */
 #define UDF_FLAG_GID_FORGET     12
 #define UDF_FLAG_UID_SET	13
fs/udf/unicode.c +2 -2
index 5fcfa96463eb..622569007b53 100644
@@ -177,7 +177,7 @@ static int udf_name_from_CS0(struct super_block *sb,
 		return 0;
 	}
 
-	if (UDF_QUERY_FLAG(sb, UDF_FLAG_NLS_MAP))
+	if (UDF_SB(sb)->s_nls_map)
 		conv_f = UDF_SB(sb)->s_nls_map->uni2char;
 	else
 		conv_f = NULL;
@@ -285,7 +285,7 @@ static int udf_name_to_CS0(struct super_block *sb,
 	if (ocu_max_len <= 0)
 		return 0;
 
-	if (UDF_QUERY_FLAG(sb, UDF_FLAG_NLS_MAP))
+	if (UDF_SB(sb)->s_nls_map)
 		conv_f = UDF_SB(sb)->s_nls_map->char2uni;
 	else
 		conv_f = NULL;
Signature · 1 line
2.30.2
author maintainer
#17 lore raw

PATCH 17/236 bcache: add proper error unwinding in bcache_device_init

In reply to Greg Kroah-Hartman

From: Christoph Hellwig <[email protected]>

[ Upstream commit 224b0683228c5f332f9cee615d85e75e9a347170 ]

Except for the IDA none of the allocations in bcache_device_init is unwound on error, fix that.

---
 drivers/md/bcache/super.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)
drivers/md/bcache/super.c +11 -5
index 248bda63f085..81f1cc5b3499 100644
@@ -934,20 +934,20 @@ static int bcache_device_init(struct bcache_device *d, unsigned int block_size,
 	n = BITS_TO_LONGS(d->nr_stripes) * sizeof(unsigned long);
 	d->full_dirty_stripes = kvzalloc(n, GFP_KERNEL);
 	if (!d->full_dirty_stripes)
-		return -ENOMEM;
+		goto out_free_stripe_sectors_dirty;
 
 	idx = ida_simple_get(&bcache_device_idx, 0,
 				BCACHE_DEVICE_IDX_MAX, GFP_KERNEL);
 	if (idx < 0)
-		return idx;
+		goto out_free_full_dirty_stripes;
 
 	if (bioset_init(&d->bio_split, 4, offsetof(struct bbio, bio),
 			BIOSET_NEED_BVECS|BIOSET_NEED_RESCUER))
-		goto err;
+		goto out_ida_remove;
 
 	d->disk = alloc_disk(BCACHE_MINORS);
 	if (!d->disk)
-		goto err;
+		goto out_bioset_exit;
 
 	set_capacity(d->disk, sectors);
 	snprintf(d->disk->disk_name, DISK_NAME_LEN, "bcache%i", idx);
@@ -993,8 +993,14 @@ static int bcache_device_init(struct bcache_device *d, unsigned int block_size,
 
 	return 0;
 
-err:
+out_bioset_exit:
+	bioset_exit(&d->bio_split);
+out_ida_remove:
 	ida_simple_remove(&bcache_device_idx, idx);
+out_free_full_dirty_stripes:
+	kvfree(d->full_dirty_stripes);
+out_free_stripe_sectors_dirty:
+	kvfree(d->stripe_sectors_dirty);
 	return -ENOMEM;
 
 }
Signature · 1 line
2.30.2
author maintainer
#22 lore raw

PATCH 22/236 power: supply: smb347-charger: Add missing pin control activation

In reply to Greg Kroah-Hartman

From: Dmitry Osipenko <[email protected]>

[ Upstream commit efe2175478d5237949e33c84d9a722fc084b218c ]

Pin control needs to be activated by setting the enable bit, otherwise hardware rejects all pin changes. Previously this stayed unnoticed on Nexus 7 because pin control was enabled by default after rebooting from downstream kernel, which uses driver that enables the bit and charger registers are non-volatile until power supply (battery) is disconnected. Configure the pin control enable bit. This fixes the potentially never-enabled charging on devices that use pin control.

---
 drivers/power/supply/smb347-charger.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/power/supply/smb347-charger.c +10 -0
index 8cfbd8d6b478..912e2184f918 100644
@@ -56,6 +56,7 @@
 #define CFG_PIN_EN_CTRL_ACTIVE_LOW		0x60
 #define CFG_PIN_EN_APSD_IRQ			BIT(1)
 #define CFG_PIN_EN_CHARGER_ERROR		BIT(2)
+#define CFG_PIN_EN_CTRL				BIT(4)
 #define CFG_THERM				0x07
 #define CFG_THERM_SOFT_HOT_COMPENSATION_MASK	0x03
 #define CFG_THERM_SOFT_HOT_COMPENSATION_SHIFT	0
@@ -725,6 +726,15 @@ static int smb347_hw_init(struct smb347_charger *smb)
 	if (ret < 0)
 		goto fail;
 
+	/* Activate pin control, making it writable. */
+	switch (smb->enable_control) {
+	case SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW:
+	case SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH:
+		ret = regmap_set_bits(smb->regmap, CFG_PIN, CFG_PIN_EN_CTRL);
+		if (ret < 0)
+			goto fail;
+	}
+
 	/*
 	 * Make the charging functionality controllable by a write to the
 	 * command register unless pin control is specified in the platform
Signature · 1 line
2.30.2
author maintainer
#10 lore raw

PATCH 10/236 EDAC/mce_amd: Do not load edac_mce_amd module on guests

In reply to Greg Kroah-Hartman

From: Smita Koralahalli <[email protected]>

[ Upstream commit 767f4b620edadac579c9b8b6660761d4285fa6f9 ]

Hypervisors likely do not expose the SMCA feature to the guest and loading this module leads to false warnings. This module should not be loaded in guests to begin with, but people tend to do so, especially when testing kernels in VMs. And then they complain about those false warnings.

Do the practical thing and do not load this module when running as a guest to avoid all that complaining.

[ bp: Rewrite commit message. ]

---
 drivers/edac/mce_amd.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/edac/mce_amd.c +3 -0
index 6c474fbef32a..b6d4ae84a9a5 100644
@@ -1176,6 +1176,9 @@ static int __init mce_amd_init(void)
 	    c->x86_vendor != X86_VENDOR_HYGON)
 		return -ENODEV;
 
+	if (cpu_feature_enabled(X86_FEATURE_HYPERVISOR))
+		return -ENODEV;
+
 	if (boot_cpu_has(X86_FEATURE_SMCA)) {
 		xec_mask = 0x3f;
 		goto out;
Signature · 1 line
2.30.2
author maintainer
#46 lore raw

PATCH 46/236 rcu: Fix stall-warning deadlock due to non-release of rcu_node ->lock

In reply to Greg Kroah-Hartman

From: Yanfei Xu <[email protected]>

[ Upstream commit dc87740c8a6806bd2162bfb441770e4e53be5601 ]

If rcu_print_task_stall() is invoked on an rcu_node structure that does not contain any tasks blocking the current grace period, it takes an early exit that fails to release that rcu_node structure's lock. This results in a self-deadlock, which is detected by lockdep.

To reproduce this bug:

tools/testing/selftests/rcutorture/bin/kvm.sh --allcpus --duration 3 --trust-make --configs "TREE03" --kconfig "CONFIG_PROVE_LOCKING=y" --bootargs "rcutorture.stall_cpu=30 rcutorture.stall_cpu_block=1 rcutorture.fwd_progress=0 rcutorture.test_boost=0"

This will also result in other complaints, including RCU's scheduler hook complaining about blocking rather than preemption and an rcutorture writer stall.

Only a partial RCU CPU stall warning message will be printed because of the self-deadlock.

This commit therefore releases the lock on the rcu_print_task_stall() function's early exit path.

Fixes c583bcb8f5ed ("rcu: Don't invoke try_invoke_on_locked_down_task() with irqs disabled")
---
 kernel/rcu/tree_stall.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
kernel/rcu/tree_stall.h +3 -1
index 3fc21617546d..251a9af3709a 100644
@@ -263,8 +263,10 @@ static int rcu_print_task_stall(struct rcu_node *rnp, unsigned long flags)
 	struct task_struct *ts[8];
 
 	lockdep_assert_irqs_disabled();
-	if (!rcu_preempt_blocked_readers_cgp(rnp))
+	if (!rcu_preempt_blocked_readers_cgp(rnp)) {
+		raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
 		return 0;
+	}
 	pr_err("\tTasks blocked on level-%d rcu_node (CPUs %d-%d):",
 	       rnp->level, rnp->grplo, rnp->grphi);
 	t = list_entry(rnp->gp_tasks->prev,
Signature · 1 line
2.30.2
author maintainer
#48 lore raw

PATCH 48/236 block: return ELEVATOR_DISCARD_MERGE if possible

In reply to Greg Kroah-Hartman

From: Ming Lei <[email protected]>

[ Upstream commit 866663b7b52d2da267b28e12eed89ee781b8fed1 ]

When merging one bio to request, if they are discard IO and the queue supports multi-range discard, we need to return ELEVATOR_DISCARD_MERGE because both block core and related drivers(nvme, virtio-blk) doesn't handle mixed discard io merge(traditional IO merge together with discard merge) well.

Fix the issue by returning ELEVATOR_DISCARD_MERGE in this situation, so both blk-mq and drivers just need to handle multi-range discard.

---
 block/bfq-iosched.c    |  3 +++
 block/blk-merge.c      | 16 ----------------
 block/elevator.c       |  3 +++
 block/mq-deadline.c    |  2 ++
 include/linux/blkdev.h | 16 ++++++++++++++++
 5 files changed, 24 insertions(+), 16 deletions(-)
block/bfq-iosched.c +3 -0
index c91dca641eb4..8ea37328ca84 100644
@@ -2251,6 +2251,9 @@ static int bfq_request_merge(struct request_queue *q, struct request **req,
 	__rq = bfq_find_rq_fmerge(bfqd, bio, q);
 	if (__rq && elv_bio_merge_ok(__rq, bio)) {
 		*req = __rq;
+
+		if (blk_discard_mergable(__rq))
+			return ELEVATOR_DISCARD_MERGE;
 		return ELEVATOR_FRONT_MERGE;
 	}
 
block/blk-merge.c +0 -16
index 110db636d230..26f4bcc10de9 100644
@@ -702,22 +702,6 @@ static void blk_account_io_merge_request(struct request *req)
 	}
 }
 
-/*
- * Two cases of handling DISCARD merge:
- * If max_discard_segments > 1, the driver takes every bio
- * as a range and send them to controller together. The ranges
- * needn't to be contiguous.
- * Otherwise, the bios/requests will be handled as same as
- * others which should be contiguous.
- */
-static inline bool blk_discard_mergable(struct request *req)
-{
-	if (req_op(req) == REQ_OP_DISCARD &&
-	    queue_max_discard_segments(req->q) > 1)
-		return true;
-	return false;
-}
-
 static enum elv_merge blk_try_req_merge(struct request *req,
 					struct request *next)
 {
block/elevator.c +3 -0
index 293c5c81397a..2a525863d4e9 100644
@@ -336,6 +336,9 @@ enum elv_merge elv_merge(struct request_queue *q, struct request **req,
 	__rq = elv_rqhash_find(q, bio->bi_iter.bi_sector);
 	if (__rq && elv_bio_merge_ok(__rq, bio)) {
 		*req = __rq;
+
+		if (blk_discard_mergable(__rq))
+			return ELEVATOR_DISCARD_MERGE;
 		return ELEVATOR_BACK_MERGE;
 	}
 
block/mq-deadline.c +2 -0
index 2b9635d0dcba..e4e90761eab3 100644
@@ -454,6 +454,8 @@ static int dd_request_merge(struct request_queue *q, struct request **rq,
 
 		if (elv_bio_merge_ok(__rq, bio)) {
 			*rq = __rq;
+			if (blk_discard_mergable(__rq))
+				return ELEVATOR_DISCARD_MERGE;
 			return ELEVATOR_FRONT_MERGE;
 		}
 	}
include/linux/blkdev.h +16 -0
index 542471b76f41..8aae375864b6 100644
@@ -1534,6 +1534,22 @@ static inline int queue_limit_discard_alignment(struct queue_limits *lim, sector
 	return offset << SECTOR_SHIFT;
 }
 
+/*
+ * Two cases of handling DISCARD merge:
+ * If max_discard_segments > 1, the driver takes every bio
+ * as a range and send them to controller together. The ranges
+ * needn't to be contiguous.
+ * Otherwise, the bios/requests will be handled as same as
+ * others which should be contiguous.
+ */
+static inline bool blk_discard_mergable(struct request *req)
+{
+	if (req_op(req) == REQ_OP_DISCARD &&
+	    queue_max_discard_segments(req->q) > 1)
+		return true;
+	return false;
+}
+
 static inline int bdev_discard_alignment(struct block_device *bdev)
 {
 	struct request_queue *q = bdev_get_queue(bdev);
Signature · 1 line
2.30.2
author maintainer
#47 lore raw

PATCH 47/236 m68k: Fix invalid RMW_INSNS on CPUs that lack CAS

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 2189e928b62e91d8efbc9826ae7c0968f0d55790 ]

When enabling CONFIG_RMW_INSNS in e.g. a Coldfire build:

    {standard input}:3068: Error: invalid instruction for this architecture; needs 68020 or higher (68020 [68k, 68ec020], 68030 [68ec030], 68040 [68ec040], 68060 [68ec060]) -- statement `casl %d4,%d0,(%a6)' ignored

Fix this by (a) adding a new config symbol to track if support for any CPU that lacks the CAS instruction is enabled, and (b) making CONFIG_RMW_INSNS depend on the new symbol not being set.

Fixes 0e152d80507b75c0 ("m68k: reorganize Kconfig options to improve mmu/non-mmu selections")
---
 arch/m68k/Kconfig.cpu | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
arch/m68k/Kconfig.cpu +7 -1
index 694c4fca9f5d..c17205da47fe 100644
@@ -25,6 +25,7 @@ config COLDFIRE
 	bool "Coldfire CPU family support"
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select CPU_HAS_NO_BITFIELDS
+	select CPU_HAS_NO_CAS
 	select CPU_HAS_NO_MULDIV64
 	select GENERIC_CSUM
 	select GPIOLIB
@@ -38,6 +39,7 @@ config M68000
 	bool "MC68000"
 	depends on !MMU
 	select CPU_HAS_NO_BITFIELDS
+	select CPU_HAS_NO_CAS
 	select CPU_HAS_NO_MULDIV64
 	select CPU_HAS_NO_UNALIGNED
 	select GENERIC_CSUM
@@ -53,6 +55,7 @@ config M68000
 config MCPU32
 	bool
 	select CPU_HAS_NO_BITFIELDS
+	select CPU_HAS_NO_CAS
 	select CPU_HAS_NO_UNALIGNED
 	select CPU_NO_EFFICIENT_FFS
 	help
@@ -357,7 +360,7 @@ config ADVANCED
 
 config RMW_INSNS
 	bool "Use read-modify-write instructions"
-	depends on ADVANCED
+	depends on ADVANCED && !CPU_HAS_NO_CAS
 	help
 	  This allows to use certain instructions that work with indivisible
 	  read-modify-write bus cycles. While this is faster than the
@@ -411,6 +414,9 @@ config NODES_SHIFT
 config CPU_HAS_NO_BITFIELDS
 	bool
 
+config CPU_HAS_NO_CAS
+	bool
+
 config CPU_HAS_NO_MULDIV64
 	bool
 
Signature · 1 line
2.30.2
author maintainer
#28 lore raw

PATCH 28/236 crypto: qat - do not ignore errors from enable_vf2pf_comms()

In reply to Greg Kroah-Hartman

From: Giovanni Cabiddu <[email protected]>

[ Upstream commit 5147f0906d50a9d26f2b8698cd06b5680e9867ff ]

The function adf_dev_init() ignores the error code reported by enable_vf2pf_comms(). If the latter fails, e.g. the VF is not compatible with the pf, then the load of the VF driver progresses.
This patch changes adf_dev_init() so that the error code from enable_vf2pf_comms() is returned to the caller.

---
 drivers/crypto/qat/qat_common/adf_init.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/crypto/qat/qat_common/adf_init.c +3 -2
index 42029153408e..5c78433d19d4 100644
@@ -61,6 +61,7 @@ int adf_dev_init(struct adf_accel_dev *accel_dev)
 	struct service_hndl *service;
 	struct list_head *list_itr;
 	struct adf_hw_device_data *hw_data = accel_dev->hw_device;
+	int ret;
 
 	if (!hw_data) {
 		dev_err(&GET_DEV(accel_dev),
@@ -127,9 +128,9 @@ int adf_dev_init(struct adf_accel_dev *accel_dev)
 	}
 
 	hw_data->enable_error_correction(accel_dev);
-	hw_data->enable_vf2pf_comms(accel_dev);
+	ret = hw_data->enable_vf2pf_comms(accel_dev);
 
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(adf_dev_init);
 
Signature · 1 line
2.30.2
author maintainer
#49 lore raw

PATCH 49/236 spi: spi-fsl-dspi: Fix issue with uninitialized dma_slave_config

In reply to Greg Kroah-Hartman

From: Tony Lindgren <[email protected]>

[ Upstream commit 209ab223ad5b18e437289235e3bde12593b94ac4 ]

Depending on the DMA driver being used, the struct dma_slave_config may need to be initialized to zero for the unused data.

For example, we have three DMA drivers using src_port_window_size and dst_port_window_size. If these are left uninitialized, it can cause DMA failures.

For spi-fsl-dspi, this is probably not currently an issue but is still good to fix though.

Fixes 90ba37033cb9 ("spi: spi-fsl-dspi: Add DMA support for Vybrid")
Cc Sanchayan Maity <[email protected]>
Cc Vladimir Oltean <[email protected]>
Cc Peter Ujfalusi <[email protected]>
Cc Vinod Koul <[email protected]>
---
 drivers/spi/spi-fsl-dspi.c | 1 +
 1 file changed, 1 insertion(+)
drivers/spi/spi-fsl-dspi.c +1 -0
index fb45e6af6638..fd004c9db9dc 100644
@@ -530,6 +530,7 @@ static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr)
 		goto err_rx_dma_buf;
 	}
 
+	memset(&cfg, 0, sizeof(cfg));
 	cfg.src_addr = phy_addr + SPI_POPR;
 	cfg.dst_addr = phy_addr + SPI_PUSHR;
 	cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
Signature · 1 line
2.30.2
author maintainer
#51 lore raw

PATCH 51/236 genirq/timings: Fix error return code in irq_timings_test_irqs()

In reply to Greg Kroah-Hartman

From: Zhen Lei <[email protected]>

[ Upstream commit 290fdc4b7ef14e33d0e30058042b0e9bfd02b89b ]

Return a negative error code from the error handling case instead of 0, as done elsewhere in this function.

Fixes f52da98d900e ("genirq/timings: Add selftest for irqs circular buffer")
---
 kernel/irq/timings.c | 2 ++
 1 file changed, 2 insertions(+)
kernel/irq/timings.c +2 -0
index 6990490fa67b..1f981162648a 100644
@@ -799,12 +799,14 @@ static int __init irq_timings_test_irqs(struct timings_intervals *ti)
 
 		__irq_timings_store(irq, irqs, ti->intervals[i]);
 		if (irqs->circ_timings[i & IRQ_TIMINGS_MASK] != index) {
+			ret = -EBADSLT;
 			pr_err("Failed to store in the circular buffer\n");
 			goto out;
 		}
 	}
 
 	if (irqs->count != ti->count) {
+		ret = -ERANGE;
 		pr_err("Count differs\n");
 		goto out;
 	}
Signature · 1 line
2.30.2
author maintainer
#45 lore raw

PATCH 45/236 rcu: Add lockdep_assert_irqs_disabled() to rcu_sched_clock_irq() and callees

In reply to Greg Kroah-Hartman

From: Paul E. McKenney <[email protected]>

[ Upstream commit a649d25dcc671a33b9cc3176411920fdc5fbd98e ]

This commit adds a number of lockdep_assert_irqs_disabled() calls to rcu_sched_clock_irq() and a number of the functions that it calls. The point of this is to help track down a situation where lockdep appears to be insisting that interrupts are enabled within these functions, which should only ever be invoked from the scheduling-clock interrupt handler.

---
 kernel/rcu/tree.c        | 4 ++++
 kernel/rcu/tree_plugin.h | 1 +
 kernel/rcu/tree_stall.h  | 8 ++++++++
 3 files changed, 13 insertions(+)
kernel/rcu/tree.c +4 -0
index 8c3ba0185082..8c81c05c4236 100644
@@ -2561,6 +2561,7 @@ static void rcu_do_batch(struct rcu_data *rdp)
 void rcu_sched_clock_irq(int user)
 {
 	trace_rcu_utilization(TPS("Start scheduler-tick"));
+	lockdep_assert_irqs_disabled();
 	raw_cpu_inc(rcu_data.ticks_this_gp);
 	/* The load-acquire pairs with the store-release setting to true. */
 	if (smp_load_acquire(this_cpu_ptr(&rcu_data.rcu_urgent_qs))) {
@@ -2574,6 +2575,7 @@ void rcu_sched_clock_irq(int user)
 	rcu_flavor_sched_clock_irq(user);
 	if (rcu_pending(user))
 		invoke_rcu_core();
+	lockdep_assert_irqs_disabled();
 
 	trace_rcu_utilization(TPS("End scheduler-tick"));
 }
@@ -3730,6 +3732,8 @@ static int rcu_pending(int user)
 	struct rcu_data *rdp = this_cpu_ptr(&rcu_data);
 	struct rcu_node *rnp = rdp->mynode;
 
+	lockdep_assert_irqs_disabled();
+
 	/* Check for CPU stalls, if enabled. */
 	check_cpu_stall(rdp);
 
kernel/rcu/tree_plugin.h +1 -0
index 7d4f78bf4057..574aeaac9272 100644
@@ -682,6 +682,7 @@ static void rcu_flavor_sched_clock_irq(int user)
 {
 	struct task_struct *t = current;
 
+	lockdep_assert_irqs_disabled();
 	if (user || rcu_is_cpu_rrupt_from_idle()) {
 		rcu_note_voluntary_context_switch(current);
 	}
kernel/rcu/tree_stall.h +8 -0
index cdfaa44ffd70..3fc21617546d 100644
@@ -262,6 +262,7 @@ static int rcu_print_task_stall(struct rcu_node *rnp, unsigned long flags)
 	struct task_struct *t;
 	struct task_struct *ts[8];
 
+	lockdep_assert_irqs_disabled();
 	if (!rcu_preempt_blocked_readers_cgp(rnp))
 		return 0;
 	pr_err("\tTasks blocked on level-%d rcu_node (CPUs %d-%d):",
@@ -286,6 +287,7 @@ static int rcu_print_task_stall(struct rcu_node *rnp, unsigned long flags)
 				".q"[rscr.rs.b.need_qs],
 				".e"[rscr.rs.b.exp_hint],
 				".l"[rscr.on_blkd_list]);
+		lockdep_assert_irqs_disabled();
 		put_task_struct(t);
 		ndetected++;
 	}
@@ -474,6 +476,8 @@ static void print_other_cpu_stall(unsigned long gp_seq, unsigned long gps)
 	struct rcu_node *rnp;
 	long totqlen = 0;
 
+	lockdep_assert_irqs_disabled();
+
 	/* Kick and suppress, if so configured. */
 	rcu_stall_kick_kthreads();
 	if (rcu_stall_is_suppressed())
@@ -495,6 +499,7 @@ static void print_other_cpu_stall(unsigned long gp_seq, unsigned long gps)
 				}
 		}
 		ndetected += rcu_print_task_stall(rnp, flags); // Releases rnp->lock.
+		lockdep_assert_irqs_disabled();
 	}
 
 	for_each_possible_cpu(cpu)
@@ -540,6 +545,8 @@ static void print_cpu_stall(unsigned long gps)
 	struct rcu_node *rnp = rcu_get_root();
 	long totqlen = 0;
 
+	lockdep_assert_irqs_disabled();
+
 	/* Kick and suppress, if so configured. */
 	rcu_stall_kick_kthreads();
 	if (rcu_stall_is_suppressed())
@@ -594,6 +601,7 @@ static void check_cpu_stall(struct rcu_data *rdp)
 	unsigned long js;
 	struct rcu_node *rnp;
 
+	lockdep_assert_irqs_disabled();
 	if ((rcu_stall_is_suppressed() && !READ_ONCE(rcu_kick_kthreads)) ||
 	    !rcu_gp_in_progress())
 		return;
Signature · 1 line
2.30.2
author maintainer
#50 lore raw

PATCH 50/236 spi: spi-pic32: Fix issue with uninitialized dma_slave_config

In reply to Greg Kroah-Hartman

From: Tony Lindgren <[email protected]>

[ Upstream commit 976c1de1de147bb7f4e0d87482f375221c05aeaf ]

Depending on the DMA driver being used, the struct dma_slave_config may need to be initialized to zero for the unused data.

For example, we have three DMA drivers using src_port_window_size and dst_port_window_size. If these are left uninitialized, it can cause DMA failures.

For spi-pic32, this is probably not currently an issue but is still good to fix though.

Fixes 1bcb9f8ceb67 ("spi: spi-pic32: Add PIC32 SPI master driver")
Cc Purna Chandra Mandal <[email protected]>
Cc Peter Ujfalusi <[email protected]>
Cc Vinod Koul <[email protected]>
---
 drivers/spi/spi-pic32.c | 1 +
 1 file changed, 1 insertion(+)
drivers/spi/spi-pic32.c +1 -0
index 104bde153efd..5eb7b61bbb4d 100644
@@ -361,6 +361,7 @@ static int pic32_spi_dma_config(struct pic32_spi *pic32s, u32 dma_width)
 	struct dma_slave_config cfg;
 	int ret;
 
+	memset(&cfg, 0, sizeof(cfg));
 	cfg.device_fc = true;
 	cfg.src_addr = pic32s->dma_base + buf_offset;
 	cfg.dst_addr = pic32s->dma_base + buf_offset;
Signature · 1 line
2.30.2
author maintainer
#52 lore raw

PATCH 52/236 irqchip/loongson-pch-pic: Improve edge triggered interrupt support

In reply to Greg Kroah-Hartman

From: Huacai Chen <[email protected]>

[ Upstream commit e5dec38ac5d05d17a7110c8045aa101015281e4d ]

Edge-triggered mode and level-triggered mode need different handlers, and edge-triggered mode need a specific ack operation. So improve it.

Fixes ef8c01eb64ca6719da449dab0 ("irqchip: Add Loongson PCH PIC controller")
---
 drivers/irqchip/irq-loongson-pch-pic.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)
drivers/irqchip/irq-loongson-pch-pic.c +18 -1
index 9bf6b9a5f734..90e1ad6e3612 100644
@@ -92,18 +92,22 @@ static int pch_pic_set_type(struct irq_data *d, unsigned int type)
 	case IRQ_TYPE_EDGE_RISING:
 		pch_pic_bitset(priv, PCH_PIC_EDGE, d->hwirq);
 		pch_pic_bitclr(priv, PCH_PIC_POL, d->hwirq);
+		irq_set_handler_locked(d, handle_edge_irq);
 		break;
 	case IRQ_TYPE_EDGE_FALLING:
 		pch_pic_bitset(priv, PCH_PIC_EDGE, d->hwirq);
 		pch_pic_bitset(priv, PCH_PIC_POL, d->hwirq);
+		irq_set_handler_locked(d, handle_edge_irq);
 		break;
 	case IRQ_TYPE_LEVEL_HIGH:
 		pch_pic_bitclr(priv, PCH_PIC_EDGE, d->hwirq);
 		pch_pic_bitclr(priv, PCH_PIC_POL, d->hwirq);
+		irq_set_handler_locked(d, handle_level_irq);
 		break;
 	case IRQ_TYPE_LEVEL_LOW:
 		pch_pic_bitclr(priv, PCH_PIC_EDGE, d->hwirq);
 		pch_pic_bitset(priv, PCH_PIC_POL, d->hwirq);
+		irq_set_handler_locked(d, handle_level_irq);
 		break;
 	default:
 		ret = -EINVAL;
@@ -113,11 +117,24 @@ static int pch_pic_set_type(struct irq_data *d, unsigned int type)
 	return ret;
 }
 
+static void pch_pic_ack_irq(struct irq_data *d)
+{
+	unsigned int reg;
+	struct pch_pic *priv = irq_data_get_irq_chip_data(d);
+
+	reg = readl(priv->base + PCH_PIC_EDGE + PIC_REG_IDX(d->hwirq) * 4);
+	if (reg & BIT(PIC_REG_BIT(d->hwirq))) {
+		writel(BIT(PIC_REG_BIT(d->hwirq)),
+			priv->base + PCH_PIC_CLR + PIC_REG_IDX(d->hwirq) * 4);
+	}
+	irq_chip_ack_parent(d);
+}
+
 static struct irq_chip pch_pic_irq_chip = {
 	.name			= "PCH PIC",
 	.irq_mask		= pch_pic_mask_irq,
 	.irq_unmask		= pch_pic_unmask_irq,
-	.irq_ack		= irq_chip_ack_parent,
+	.irq_ack		= pch_pic_ack_irq,
 	.irq_set_affinity	= irq_chip_set_affinity_parent,
 	.irq_set_type		= pch_pic_set_type,
 };
Signature · 1 line
2.30.2
author maintainer
#53 lore raw

PATCH 53/236 lib/mpi: use kcalloc in mpi_resize

In reply to Greg Kroah-Hartman

From: Hongbo Li <[email protected]>

[ Upstream commit b6f756726e4dfe75be1883f6a0202dcecdc801ab ]

We should set the additional space to 0 in mpi_resize(). So use kcalloc() instead of kmalloc_array().

In lib/mpi/ec.c:
/****************
* Resize the array of A to NLIMBS. the additional space is cleared
* (set to 0) [done by m_realloc()]
*/
int mpi_resize(MPI a, unsigned nlimbs)

Like the comment of kernel's mpi_resize() said, the additional space need to be set to 0, but when a->d is not NULL, it does not set.

The kernel's mpi lib is from libgcrypt, the mpi resize in libgcrypt is _gcry_mpi_resize() which set the additional space to 0.

This bug may cause mpi api which use mpi_resize() get wrong result under the condition of using the additional space without initiation. If this condition is not met, the bug would not be triggered. Currently in kernel, rsa, sm2 and dh use mpi lib, and they works well, so the bug is not triggered in these cases.

add_points_edwards() use the additional space directly, so it will get a wrong result.

Fixes cdec9cb5167a ("crypto: GnuPG based MPI lib - source files (part 1)")
---
 lib/mpi/mpiutil.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/mpi/mpiutil.c +1 -1
index 3c63710c20c6..e6c4b3180ab1 100644
@@ -148,7 +148,7 @@ int mpi_resize(MPI a, unsigned nlimbs)
 		return 0;	/* no need to do it */
 
 	if (a->d) {
-		p = kmalloc_array(nlimbs, sizeof(mpi_limb_t), GFP_KERNEL);
+		p = kcalloc(nlimbs, sizeof(mpi_limb_t), GFP_KERNEL);
 		if (!p)
 			return -ENOMEM;
 		memcpy(p, a->d, a->alloced * sizeof(mpi_limb_t));
Signature · 1 line
2.30.2
author maintainer
#54 lore raw

PATCH 54/236 clocksource/drivers/sh_cmt: Fix wrong setting if dont request IRQ for clock source channel

In reply to Greg Kroah-Hartman

From: Phong Hoang <[email protected]>

[ Upstream commit be83c3b6e7b8ff22f72827a613bf6f3aa5afadbb ]

If CMT instance has at least two channels, one channel will be used as a clock source and another one used as a clock event device. In that case, IRQ is not requested for clock source channel so sh_cmt_clock_event_program_verify() might work incorrectly. Besides, when a channel is only used for clock source, don't need to re-set the next match_value since it should be maximum timeout as it still is.

On the other hand, due to no IRQ, total_cycles is not counted up when reaches compare match time (timer counter resets to zero), so sh_cmt_clocksource_read() returns unexpected value. Therefore, use 64-bit clocksoure's mask for 32-bit or 16-bit variants will also lead to wrong delta calculation. Hence, this mask should correspond to timer counter width, and above function just returns the raw value of timer counter register.

Fixes bfa76bb12f23 ("clocksource: sh_cmt: Request IRQ for clock event device only")
Fixes 37e7742c55ba ("clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines")
---
 drivers/clocksource/sh_cmt.c | 30 ++++++++++++++++++------------
 1 file changed, 18 insertions(+), 12 deletions(-)
drivers/clocksource/sh_cmt.c +18 -12
index 760777458a90..2acfcc966bb5 100644
@@ -572,7 +572,8 @@ static int sh_cmt_start(struct sh_cmt_channel *ch, unsigned long flag)
 	ch->flags |= flag;
 
 	/* setup timeout if no clockevent */
-	if ((flag == FLAG_CLOCKSOURCE) && (!(ch->flags & FLAG_CLOCKEVENT)))
+	if (ch->cmt->num_channels == 1 &&
+	    flag == FLAG_CLOCKSOURCE && (!(ch->flags & FLAG_CLOCKEVENT)))
 		__sh_cmt_set_next(ch, ch->max_match_value);
  out:
 	raw_spin_unlock_irqrestore(&ch->lock, flags);
@@ -608,20 +609,25 @@ static struct sh_cmt_channel *cs_to_sh_cmt(struct clocksource *cs)
 static u64 sh_cmt_clocksource_read(struct clocksource *cs)
 {
 	struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
-	unsigned long flags;
 	u32 has_wrapped;
-	u64 value;
-	u32 raw;
 
-	raw_spin_lock_irqsave(&ch->lock, flags);
-	value = ch->total_cycles;
-	raw = sh_cmt_get_counter(ch, &has_wrapped);
+	if (ch->cmt->num_channels == 1) {
+		unsigned long flags;
+		u64 value;
+		u32 raw;
 
-	if (unlikely(has_wrapped))
-		raw += ch->match_value + 1;
-	raw_spin_unlock_irqrestore(&ch->lock, flags);
+		raw_spin_lock_irqsave(&ch->lock, flags);
+		value = ch->total_cycles;
+		raw = sh_cmt_get_counter(ch, &has_wrapped);
+
+		if (unlikely(has_wrapped))
+			raw += ch->match_value + 1;
+		raw_spin_unlock_irqrestore(&ch->lock, flags);
+
+		return value + raw;
+	}
 
-	return value + raw;
+	return sh_cmt_get_counter(ch, &has_wrapped);
 }
 
 static int sh_cmt_clocksource_enable(struct clocksource *cs)
@@ -684,7 +690,7 @@ static int sh_cmt_register_clocksource(struct sh_cmt_channel *ch,
 	cs->disable = sh_cmt_clocksource_disable;
 	cs->suspend = sh_cmt_clocksource_suspend;
 	cs->resume = sh_cmt_clocksource_resume;
-	cs->mask = CLOCKSOURCE_MASK(sizeof(u64) * 8);
+	cs->mask = CLOCKSOURCE_MASK(ch->cmt->info->width);
 	cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
 
 	dev_info(&ch->cmt->pdev->dev, "ch%u: used as clock source\n",
Signature · 1 line
2.30.2
author maintainer
#55 lore raw

PATCH 55/236 block: nbd: add sanity check for first_minor

In reply to Greg Kroah-Hartman

From: Pavel Skripkin <[email protected]>

[ Upstream commit b1a811633f7321cf1ae2bb76a66805b7720e44c9 ]

Syzbot hit WARNING in internal_create_group(). The problem was in too big disk->first_minor.

disk->first_minor is initialized by value, which comes from userspace and there wasn't any sanity checks about value correctness. It can cause duplicate creation of sysfs files/links, because disk->first_minor will be passed to MKDEV() which causes truncation to byte. Since maximum minor value is 0xff, let's check if first_minor is correct minor number.

NOTE: the root case of the reported warning was in wrong error handling in register_disk(), but we can avoid passing knowingly wrong values to sysfs API, because sysfs error messages can confuse users. For example:
user passed 1048576 as index, but sysfs complains about duplicate creation of /dev/block/43:0. It's not obvious how 1048576 becomes 0. Log and reproducer for above example can be found on syzkaller bug report page.

---
 drivers/block/nbd.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/block/nbd.c +10 -0
index 59c452fff835..98274ba0701d 100644
@@ -1759,7 +1759,17 @@ static int nbd_dev_add(int index)
 	refcount_set(&nbd->refs, 1);
 	INIT_LIST_HEAD(&nbd->list);
 	disk->major = NBD_MAJOR;
+
+	/* Too big first_minor can cause duplicate creation of
+	 * sysfs files/links, since first_minor will be truncated to
+	 * byte in __device_add_disk().
+	 */
 	disk->first_minor = index << part_shift;
+	if (disk->first_minor > 0xff) {
+		err = -EINVAL;
+		goto out_free_idr;
+	}
+
 	disk->fops = &nbd_fops;
 	disk->private_data = nbd;
 	sprintf(disk->disk_name, "nbd%d", index);
Signature · 1 line
2.30.2
author maintainer
#29 lore raw

PATCH 29/236 crypto: qat - handle both source of interrupt in VF ISR

In reply to Greg Kroah-Hartman

From: Giovanni Cabiddu <[email protected]>

[ Upstream commit 0a73c762e1eee33a5e5dc0e3488f1b7cd17249b3 ]

The top half of the VF drivers handled only a source at the time. If an interrupt for PF2VF and bundle occurred at the same time, the ISR scheduled only the bottom half for PF2VF.
This patch fixes the VF top half so that if both sources of interrupt trigger at the same time, both bottom halves are scheduled.

This patch is based on earlier work done by Conor McLoughlin.

---
 drivers/crypto/qat/qat_common/adf_vf_isr.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/crypto/qat/qat_common/adf_vf_isr.c +4 -3
index 31a36288623a..024401ec9d1a 100644
@@ -159,6 +159,7 @@ static irqreturn_t adf_isr(int irq, void *privdata)
 	struct adf_bar *pmisc =
 			&GET_BARS(accel_dev)[hw_data->get_misc_bar_id(hw_data)];
 	void __iomem *pmisc_bar_addr = pmisc->virt_addr;
+	bool handled = false;
 	u32 v_int;
 
 	/* Read VF INT source CSR to determine the source of VF interrupt */
@@ -171,7 +172,7 @@ static irqreturn_t adf_isr(int irq, void *privdata)
 
 		/* Schedule tasklet to handle interrupt BH */
 		tasklet_hi_schedule(&accel_dev->vf.pf2vf_bh_tasklet);
-		return IRQ_HANDLED;
+		handled = true;
 	}
 
 	/* Check bundle interrupt */
@@ -183,10 +184,10 @@ static irqreturn_t adf_isr(int irq, void *privdata)
 		WRITE_CSR_INT_FLAG_AND_COL(bank->csr_addr, bank->bank_number,
 					   0);
 		tasklet_hi_schedule(&bank->resp_handler);
-		return IRQ_HANDLED;
+		handled = true;
 	}
 
-	return IRQ_NONE;
+	return handled ? IRQ_HANDLED : IRQ_NONE;
 }
 
 static int adf_request_msi_irq(struct adf_accel_dev *accel_dev)
Signature · 1 line
2.30.2
author maintainer
#44 lore raw

PATCH 44/236 rcu: Fix to include first blocked task in stall warning

In reply to Greg Kroah-Hartman

From: Yanfei Xu <[email protected]>

[ Upstream commit e6a901a44f76878ed1653626c9ff4cfc5a3f58f8 ]

The for loop in rcu_print_task_stall() always omits ts[0], which points to the first task blocking the stalled grace period. This in turn fails to count this first task, which means that ndetected will be equal to zero when all CPUs have passed through their quiescent states and only one task is blocking the stalled grace period. This zero value for ndetected will in turn result in an incorrect "All QSes seen" message:

rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu:    Tasks blocked on level-1 rcu_node (CPUs 12-23):
        (detected by 15, t=6504 jiffies, g=164777, q=9011209)
rcu: All QSes seen, last rcu_preempt kthread activity 1 (4295252379-4295252378), jiffies_till_next_fqs=1, root ->qsmask 0x2
BUG: sleeping function called from invalid context at include/linux/uaccess.h:156
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 70613, name: msgstress04
INFO: lockdep is turned off.
Preemption disabled at:
[<ffff8000104031a4>] create_object.isra.0+0x204/0x4b0
CPU: 15 PID: 70613 Comm: msgstress04 Kdump: loaded Not tainted
5.12.2-yoctodev-standard #1
Hardware name: Marvell OcteonTX CN96XX board (DT)
Call trace:
 dump_backtrace+0x0/0x2cc
 show_stack+0x24/0x30
 dump_stack+0x110/0x188
 ___might_sleep+0x214/0x2d0
 __might_sleep+0x7c/0xe0

This commit therefore fixes the loop to include ts[0].

Fixes c583bcb8f5ed ("rcu: Don't invoke try_invoke_on_locked_down_task() with irqs disabled")
---
 kernel/rcu/tree_stall.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/rcu/tree_stall.h +2 -2
index 0435e5e716a8..cdfaa44ffd70 100644
@@ -275,8 +275,8 @@ static int rcu_print_task_stall(struct rcu_node *rnp, unsigned long flags)
 			break;
 	}
 	raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
-	for (i--; i; i--) {
-		t = ts[i];
+	while (i) {
+		t = ts[--i];
 		if (!try_invoke_on_locked_down_task(t, check_slow_task, &rscr))
 			pr_cont(" P%d", t->pid);
 		else
Signature · 1 line
2.30.2
author maintainer
#56 lore raw

PATCH 56/236 spi: coldfire-qspi: Use clk_disable_unprepare in the remove function

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit d68f4c73d729245a47e70eb216fa24bc174ed2e2 ]

'clk_prepare_enable()' is used in the probe, so 'clk_disable_unprepare()' should be used in the remove function to be consistent.

---
 drivers/spi/spi-coldfire-qspi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/spi/spi-coldfire-qspi.c +1 -1
index 8996115ce736..263ce9047327 100644
@@ -444,7 +444,7 @@ static int mcfqspi_remove(struct platform_device *pdev)
 	mcfqspi_wr_qmr(mcfqspi, MCFQSPI_QMR_MSTR);
 
 	mcfqspi_cs_teardown(mcfqspi);
-	clk_disable(mcfqspi->clk);
+	clk_disable_unprepare(mcfqspi->clk);
 
 	return 0;
 }
Signature · 1 line
2.30.2
author maintainer
#43 lore raw

PATCH 43/236 sched: Fix UCLAMP_FLAG_IDLE setting

In reply to Greg Kroah-Hartman

From: Quentin Perret <[email protected]>

[ Upstream commit ca4984a7dd863f3e1c0df775ae3e744bff24c303 ]

The UCLAMP_FLAG_IDLE flag is set on a runqueue when dequeueing the last uclamp active task (that is, when buckets.tasks reaches 0 for all buckets) to maintain the last uclamp.max and prevent blocked util from suddenly becoming visible.

However, there is an asymmetry in how the flag is set and cleared which can lead to having the flag set whilst there are active tasks on the rq. Specifically, the flag is cleared in the uclamp_rq_inc() path, which is called at enqueue time, but set in uclamp_rq_dec_id() which is called both when dequeueing a task _and_ in the update_uclamp_active() path. As a result, when both uclamp_rq_{dec,ind}_id() are called from update_uclamp_active(), the flag ends up being set but not cleared, hence leaving the runqueue in a broken state.

Fix this by clearing the flag in update_uclamp_active() as well.

---
 kernel/sched/core.c | 25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)
kernel/sched/core.c +19 -6
index 84c105902027..6db20a66e8e6 100644
@@ -1279,6 +1279,23 @@ static inline void uclamp_rq_dec(struct rq *rq, struct task_struct *p)
 		uclamp_rq_dec_id(rq, p, clamp_id);
 }
 
+static inline void uclamp_rq_reinc_id(struct rq *rq, struct task_struct *p,
+				      enum uclamp_id clamp_id)
+{
+	if (!p->uclamp[clamp_id].active)
+		return;
+
+	uclamp_rq_dec_id(rq, p, clamp_id);
+	uclamp_rq_inc_id(rq, p, clamp_id);
+
+	/*
+	 * Make sure to clear the idle flag if we've transiently reached 0
+	 * active tasks on rq.
+	 */
+	if (clamp_id == UCLAMP_MAX && (rq->uclamp_flags & UCLAMP_FLAG_IDLE))
+		rq->uclamp_flags &= ~UCLAMP_FLAG_IDLE;
+}
+
 static inline void
 uclamp_update_active(struct task_struct *p)
 {
@@ -1302,12 +1319,8 @@ uclamp_update_active(struct task_struct *p)
 	 * affecting a valid clamp bucket, the next time it's enqueued,
 	 * it will already see the updated clamp bucket value.
 	 */
-	for_each_clamp_id(clamp_id) {
-		if (p->uclamp[clamp_id].active) {
-			uclamp_rq_dec_id(rq, p, clamp_id);
-			uclamp_rq_inc_id(rq, p, clamp_id);
-		}
-	}
+	for_each_clamp_id(clamp_id)
+		uclamp_rq_reinc_id(rq, p, clamp_id);
 
 	task_rq_unlock(rq, p, &rf);
 }
Signature · 1 line
2.30.2
author maintainer
#42 lore raw

PATCH 42/236 sched/numa: Fix is_core_idle()

In reply to Greg Kroah-Hartman

From: Mika Penttilä <[email protected]>

[ Upstream commit 1c6829cfd3d5124b125e6df41158665aea413b35 ]

Use the loop variable instead of the function argument to test the other SMT siblings for idle.

Fixes ff7db0bf24db ("sched/numa: Prefer using an idle CPU as a migration target instead of comparing tasks")
---
 kernel/sched/fair.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/sched/fair.c +1 -1
index bad97d35684d..c004e3b89c32 100644
@@ -1533,7 +1533,7 @@ static inline bool is_core_idle(int cpu)
 		if (cpu == sibling)
 			continue;
 
-		if (!idle_cpu(cpu))
+		if (!idle_cpu(sibling))
 			return false;
 	}
 #endif
Signature · 1 line
2.30.2
author maintainer
#57 lore raw

PATCH 57/236 irqchip/gic-v3: Fix priority comparison when non-secure priorities are used

In reply to Greg Kroah-Hartman

From: Chen-Yu Tsai <[email protected]>

[ Upstream commit 8d474deaba2c4dd33a5e2f5be82e6798ffa6b8a5 ]

When non-secure priorities are used, compared to the raw priority set, the value read back from RPR is also right-shifted by one and the highest bit set.

Add a macro to do the modifications to the raw priority when doing the comparison against the RPR value. This corrects the pseudo-NMI behavior when non-secure priorities in the GIC are used. Tested on 5.10 with the "IPI as pseudo-NMI" series [1] applied on MT8195.

[1] https://lore.kernel.org/linux-arm-kernel/[email protected]/

Fixes 336780590990 ("irqchip/gic-v3: Support pseudo-NMIs when SCR_EL3.FIQ == 0")
[maz: Added comment contributed by Alex]
---
 drivers/irqchip/irq-gic-v3.c | 23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)
drivers/irqchip/irq-gic-v3.c +22 -1
index 1005b182bab4..1bdb7acf445f 100644
@@ -100,6 +100,27 @@ EXPORT_SYMBOL(gic_pmr_sync);
 DEFINE_STATIC_KEY_FALSE(gic_nonsecure_priorities);
 EXPORT_SYMBOL(gic_nonsecure_priorities);
 
+/*
+ * When the Non-secure world has access to group 0 interrupts (as a
+ * consequence of SCR_EL3.FIQ == 0), reading the ICC_RPR_EL1 register will
+ * return the Distributor's view of the interrupt priority.
+ *
+ * When GIC security is enabled (GICD_CTLR.DS == 0), the interrupt priority
+ * written by software is moved to the Non-secure range by the Distributor.
+ *
+ * If both are true (which is when gic_nonsecure_priorities gets enabled),
+ * we need to shift down the priority programmed by software to match it
+ * against the value returned by ICC_RPR_EL1.
+ */
+#define GICD_INT_RPR_PRI(priority)					\
+	({								\
+		u32 __priority = (priority);				\
+		if (static_branch_unlikely(&gic_nonsecure_priorities))	\
+			__priority = 0x80 | (__priority >> 1);		\
+									\
+		__priority;						\
+	})
+
 /* ppi_nmi_refs[n] == number of cpus having ppi[n + 16] set as NMI */
 static refcount_t *ppi_nmi_refs;
 
@@ -687,7 +708,7 @@ static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs
 		return;
 
 	if (gic_supports_nmi() &&
-	    unlikely(gic_read_rpr() == GICD_INT_NMI_PRI)) {
+	    unlikely(gic_read_rpr() == GICD_INT_RPR_PRI(GICD_INT_NMI_PRI))) {
 		gic_handle_nmi(irqnr, regs);
 		return;
 	}
Signature · 1 line
2.30.2
author maintainer
#58 lore raw

PATCH 58/236 crypto: qat - use proper type for vf_mask

In reply to Greg Kroah-Hartman

From: Giovanni Cabiddu <[email protected]>

[ Upstream commit 462354d986b6a89c6449b85f17aaacf44e455216 ]

Replace vf_mask type with unsigned long to avoid a stack-out-of-bound.

This is to fix the following warning reported by KASAN the first time adf_msix_isr_ae() gets called.

    [  692.091987] BUG: KASAN: stack-out-of-bounds in find_first_bit+0x28/0x50
    [  692.092017] Read of size 8 at addr ffff88afdf789e60 by task swapper/32/0
    [  692.092076] Call Trace:
    [  692.092089]  <IRQ>
    [  692.092101]  dump_stack+0x9c/0xcf
    [  692.092132]  print_address_description.constprop.0+0x18/0x130
    [  692.092164]  ? find_first_bit+0x28/0x50
    [  692.092185]  kasan_report.cold+0x7f/0x111
    [  692.092213]  ? static_obj+0x10/0x80
    [  692.092234]  ? find_first_bit+0x28/0x50
    [  692.092262]  find_first_bit+0x28/0x50
    [  692.092288]  adf_msix_isr_ae+0x16e/0x230 [intel_qat]
Fixes ed8ccaef52fa ("crypto: qat - Add support for SRIOV")
---
 drivers/crypto/qat/qat_common/adf_isr.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/crypto/qat/qat_common/adf_isr.c +4 -3
index da6ef007a6ae..de2f137e44ef 100644
@@ -15,6 +15,8 @@
 #include "adf_transport_access_macros.h"
 #include "adf_transport_internal.h"
 
+#define ADF_MAX_NUM_VFS	32
+
 static int adf_enable_msix(struct adf_accel_dev *accel_dev)
 {
 	struct adf_accel_pci *pci_dev_info = &accel_dev->accel_pci_dev;
@@ -67,7 +69,7 @@ static irqreturn_t adf_msix_isr_ae(int irq, void *dev_ptr)
 		struct adf_bar *pmisc =
 			&GET_BARS(accel_dev)[hw_data->get_misc_bar_id(hw_data)];
 		void __iomem *pmisc_bar_addr = pmisc->virt_addr;
-		u32 vf_mask;
+		unsigned long vf_mask;
 
 		/* Get the interrupt sources triggered by VFs */
 		vf_mask = ((ADF_CSR_RD(pmisc_bar_addr, ADF_ERRSOU5) &
@@ -88,8 +90,7 @@ static irqreturn_t adf_msix_isr_ae(int irq, void *dev_ptr)
 			 * unless the VF is malicious and is attempting to
 			 * flood the host OS with VF2PF interrupts.
 			 */
-			for_each_set_bit(i, (const unsigned long *)&vf_mask,
-					 (sizeof(vf_mask) * BITS_PER_BYTE)) {
+			for_each_set_bit(i, &vf_mask, ADF_MAX_NUM_VFS) {
 				vf_info = accel_dev->pf.vf_info + i;
 
 				if (!__ratelimit(&vf_info->vf2pf_ratelimit)) {
Signature · 1 line
2.30.2
author maintainer
#59 lore raw

PATCH 59/236 certs: Trigger creation of RSA module signing key if its not an RSA key

In reply to Greg Kroah-Hartman

From: Stefan Berger <[email protected]>

[ Upstream commit ea35e0d5df6c92fa2e124bb1b91d09b2240715ba ]

Address a kbuild issue where a developer created an ECDSA key for signing kernel modules and then builds an older version of the kernel, when bi- secting the kernel for example, that does not support ECDSA keys.

If openssl is installed, trigger the creation of an RSA module signing key if it is not an RSA key.

Fixes cfc411e7fff3 ("Move certificate handling to its own directory")
Cc David Howells <[email protected]>
Cc David Woodhouse <[email protected]>
---
 certs/Makefile | 8 ++++++++
 1 file changed, 8 insertions(+)
certs/Makefile +8 -0
index b6db52ebf0be..b338799c0b24 100644
@@ -47,11 +47,19 @@ endif
 redirect_openssl	= 2>&1
 quiet_redirect_openssl	= 2>&1
 silent_redirect_openssl = 2>/dev/null
+openssl_available       = $(shell openssl help 2>/dev/null && echo yes)
 
 # We do it this way rather than having a boolean option for enabling an
 # external private key, because 'make randconfig' might enable such a
 # boolean option and we unfortunately can't make it depend on !RANDCONFIG.
 ifeq ($(CONFIG_MODULE_SIG_KEY),"certs/signing_key.pem")
+
+ifeq ($(openssl_available),yes)
+X509TEXT=$(shell openssl x509 -in "certs/signing_key.pem" -text 2>/dev/null)
+
+$(if $(findstring rsaEncryption,$(X509TEXT)),,$(shell rm -f "certs/signing_key.pem"))
+endif
+
 $(obj)/signing_key.pem: $(obj)/x509.genkey
 	@$(kecho) "###"
 	@$(kecho) "### Now generating an X.509 key pair to be used for signing modules."
Signature · 1 line
2.30.2
author maintainer
#41 lore raw

PATCH 41/236 m68k: emu: Fix invalid free in nfeth_cleanup()

In reply to Greg Kroah-Hartman

From: Pavel Skripkin <[email protected]>

[ Upstream commit 761608f5cf70e8876c2f0e39ca54b516bdcb7c12 ]

In the for loop all nfeth_dev array members should be freed, not only the first one. Freeing only the first array member can cause double-free bugs and memory leaks.

Fixes 9cd7b148312f ("m68k/atari: ARAnyM - Add support for network access")
---
 arch/m68k/emu/nfeth.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/m68k/emu/nfeth.c +2 -2
index d2875e32abfc..79e55421cfb1 100644
@@ -254,8 +254,8 @@ static void __exit nfeth_cleanup(void)
 
 	for (i = 0; i < MAX_UNIT; i++) {
 		if (nfeth_dev[i]) {
-			unregister_netdev(nfeth_dev[0]);
-			free_netdev(nfeth_dev[0]);
+			unregister_netdev(nfeth_dev[i]);
+			free_netdev(nfeth_dev[i]);
 		}
 	}
 	free_irq(nfEtherIRQ, nfeth_interrupt);
Signature · 1 line
2.30.2
author maintainer
#40 lore raw

PATCH 40/236 power: supply: cw2015: use dev_err_probe to allow deferred probe

In reply to Greg Kroah-Hartman

From: Peter Robinson <[email protected]>

[ Upstream commit ad1abe476995d97bfe7546ea91bb4f3dcdfbf3ab ]

Deal with deferred probe using dev_err_probe so the error is handled and avoid logging lots probe defer information like the following:

[    9.125121] cw2015 4-0062: Failed to register power supply
[    9.211131] cw2015 4-0062: Failed to register power supply
Fixes b4c7715c10c1 ("power: supply: add CellWise cw2015 fuel gauge driver")
---
 drivers/power/supply/cw2015_battery.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/power/supply/cw2015_battery.c +3 -1
index 0146f1bfc29b..de1fa71be1e8 100644
@@ -673,7 +673,9 @@ static int cw_bat_probe(struct i2c_client *client)
 						    &cw2015_bat_desc,
 						    &psy_cfg);
 	if (IS_ERR(cw_bat->rk_bat)) {
-		dev_err(cw_bat->dev, "Failed to register power supply\n");
+		/* try again if this happens */
+		dev_err_probe(&client->dev, PTR_ERR(cw_bat->rk_bat),
+			"Failed to register power supply\n");
 		return PTR_ERR(cw_bat->rk_bat);
 	}
 
Signature · 1 line
2.30.2
author maintainer
#39 lore raw

PATCH 39/236 s390/ap: fix state machine hang after failure to enable irq

In reply to Greg Kroah-Hartman

From: Harald Freudenberger <[email protected]>

[ Upstream commit cabebb697c98fb1f05cc950a747a9b6ec61a5b01 ]

If for any reason the interrupt enable for an ap queue fails the state machine run for the queue returned wrong return codes to the caller. So the caller assumed interrupt support for this queue in enabled and thus did not re-establish the high resolution timer used for polling. In the end this let to a hang for the user space process waiting "forever" for the reply.

This patch reworks these return codes to return correct indications for the caller to re-establish the timer when a queue runs without interrupt support.

Please note that this is fixing a wrong behavior after a first failure (enable interrupt support for the queue) failed. However, looks like this occasionally happens on KVM systems.

---
 drivers/s390/crypto/ap_bus.c   | 25 ++++++++-----------------
 drivers/s390/crypto/ap_bus.h   | 10 ++--------
 drivers/s390/crypto/ap_queue.c | 20 +++++++++++---------
 3 files changed, 21 insertions(+), 34 deletions(-)
drivers/s390/crypto/ap_bus.c +8 -17
index ef738b42a092..c00a288a4eca 100644
@@ -114,22 +114,13 @@ static struct bus_type ap_bus_type;
 /* Adapter interrupt definitions */
 static void ap_interrupt_handler(struct airq_struct *airq, bool floating);
 
-static int ap_airq_flag;
+static bool ap_irq_flag;
 
 static struct airq_struct ap_airq = {
 	.handler = ap_interrupt_handler,
 	.isc = AP_ISC,
 };
 
-/**
- * ap_using_interrupts() - Returns non-zero if interrupt support is
- * available.
- */
-static inline int ap_using_interrupts(void)
-{
-	return ap_airq_flag;
-}
-
 /**
  * ap_airq_ptr() - Get the address of the adapter interrupt indicator
  *
@@ -139,7 +130,7 @@ static inline int ap_using_interrupts(void)
  */
 void *ap_airq_ptr(void)
 {
-	if (ap_using_interrupts())
+	if (ap_irq_flag)
 		return ap_airq.lsi_ptr;
 	return NULL;
 }
@@ -369,7 +360,7 @@ void ap_wait(enum ap_sm_wait wait)
 	switch (wait) {
 	case AP_SM_WAIT_AGAIN:
 	case AP_SM_WAIT_INTERRUPT:
-		if (ap_using_interrupts())
+		if (ap_irq_flag)
 			break;
 		if (ap_poll_kthread) {
 			wake_up(&ap_poll_wait);
@@ -444,7 +435,7 @@ static void ap_tasklet_fn(unsigned long dummy)
 	 * be received. Doing it in the beginning of the tasklet is therefor
 	 * important that no requests on any AP get lost.
 	 */
-	if (ap_using_interrupts())
+	if (ap_irq_flag)
 		xchg(ap_airq.lsi_ptr, 0);
 
 	spin_lock_bh(&ap_queues_lock);
@@ -514,7 +505,7 @@ static int ap_poll_thread_start(void)
 {
 	int rc;
 
-	if (ap_using_interrupts() || ap_poll_kthread)
+	if (ap_irq_flag || ap_poll_kthread)
 		return 0;
 	mutex_lock(&ap_poll_thread_mutex);
 	ap_poll_kthread = kthread_run(ap_poll_thread, NULL, "appoll");
@@ -1014,7 +1005,7 @@ static BUS_ATTR_RO(ap_adapter_mask);
 static ssize_t ap_interrupts_show(struct bus_type *bus, char *buf)
 {
 	return scnprintf(buf, PAGE_SIZE, "%d\n",
-			 ap_using_interrupts() ? 1 : 0);
+			 ap_irq_flag ? 1 : 0);
 }
 
 static BUS_ATTR_RO(ap_interrupts);
@@ -1687,7 +1678,7 @@ static int __init ap_module_init(void)
 	/* enable interrupts if available */
 	if (ap_interrupts_available()) {
 		rc = register_adapter_interrupt(&ap_airq);
-		ap_airq_flag = (rc == 0);
+		ap_irq_flag = (rc == 0);
 	}
 
 	/* Create /sys/bus/ap. */
@@ -1737,7 +1728,7 @@ out_bus:
 		bus_remove_file(&ap_bus_type, ap_bus_attrs[i]);
 	bus_unregister(&ap_bus_type);
 out:
-	if (ap_using_interrupts())
+	if (ap_irq_flag)
 		unregister_adapter_interrupt(&ap_airq);
 	kfree(ap_qci_info);
 	return rc;
drivers/s390/crypto/ap_bus.h +2 -8
index 5029b80132aa..ccdbd95cab70 100644
@@ -77,12 +77,6 @@ static inline int ap_test_bit(unsigned int *ptr, unsigned int nr)
 #define AP_FUNC_EP11  5
 #define AP_FUNC_APXA  6
 
-/*
- * AP interrupt states
- */
-#define AP_INTR_DISABLED	0	/* AP interrupt disabled */
-#define AP_INTR_ENABLED		1	/* AP interrupt enabled */
-
 /*
  * AP queue state machine states
  */
@@ -109,7 +103,7 @@ enum ap_sm_event {
  * AP queue state wait behaviour
  */
 enum ap_sm_wait {
-	AP_SM_WAIT_AGAIN,	/* retry immediately */
+	AP_SM_WAIT_AGAIN = 0,	/* retry immediately */
 	AP_SM_WAIT_TIMEOUT,	/* wait for timeout */
 	AP_SM_WAIT_INTERRUPT,	/* wait for thin interrupt (if available) */
 	AP_SM_WAIT_NONE,	/* no wait */
@@ -182,7 +176,7 @@ struct ap_queue {
 	enum ap_dev_state dev_state;	/* queue device state */
 	bool config;			/* configured state */
 	ap_qid_t qid;			/* AP queue id. */
-	int interrupt;			/* indicate if interrupts are enabled */
+	bool interrupt;			/* indicate if interrupts are enabled */
 	int queue_count;		/* # messages currently on AP queue. */
 	int pendingq_count;		/* # requests on pendingq list. */
 	int requestq_count;		/* # requests on requestq list. */
drivers/s390/crypto/ap_queue.c +11 -9
index 337353c9655e..639f8d25679c 100644
@@ -19,7 +19,7 @@
 static void __ap_flush_queue(struct ap_queue *aq);
 
 /**
- * ap_queue_enable_interruption(): Enable interruption on an AP queue.
+ * ap_queue_enable_irq(): Enable interrupt support on this AP queue.
  * @qid: The AP queue number
  * @ind: the notification indicator byte
  *
@@ -27,7 +27,7 @@ static void __ap_flush_queue(struct ap_queue *aq);
  * value it waits a while and tests the AP queue if interrupts
  * have been switched on using ap_test_queue().
  */
-static int ap_queue_enable_interruption(struct ap_queue *aq, void *ind)
+static int ap_queue_enable_irq(struct ap_queue *aq, void *ind)
 {
 	struct ap_queue_status status;
 	struct ap_qirq_ctrl qirqctrl = { 0 };
@@ -198,7 +198,8 @@ static enum ap_sm_wait ap_sm_read(struct ap_queue *aq)
 		return AP_SM_WAIT_NONE;
 	case AP_RESPONSE_NO_PENDING_REPLY:
 		if (aq->queue_count > 0)
-			return AP_SM_WAIT_INTERRUPT;
+			return aq->interrupt ?
+				AP_SM_WAIT_INTERRUPT : AP_SM_WAIT_TIMEOUT;
 		aq->sm_state = AP_SM_STATE_IDLE;
 		return AP_SM_WAIT_NONE;
 	default:
@@ -252,7 +253,8 @@ static enum ap_sm_wait ap_sm_write(struct ap_queue *aq)
 		fallthrough;
 	case AP_RESPONSE_Q_FULL:
 		aq->sm_state = AP_SM_STATE_QUEUE_FULL;
-		return AP_SM_WAIT_INTERRUPT;
+		return aq->interrupt ?
+			AP_SM_WAIT_INTERRUPT : AP_SM_WAIT_TIMEOUT;
 	case AP_RESPONSE_RESET_IN_PROGRESS:
 		aq->sm_state = AP_SM_STATE_RESET_WAIT;
 		return AP_SM_WAIT_TIMEOUT;
@@ -302,7 +304,7 @@ static enum ap_sm_wait ap_sm_reset(struct ap_queue *aq)
 	case AP_RESPONSE_NORMAL:
 	case AP_RESPONSE_RESET_IN_PROGRESS:
 		aq->sm_state = AP_SM_STATE_RESET_WAIT;
-		aq->interrupt = AP_INTR_DISABLED;
+		aq->interrupt = false;
 		return AP_SM_WAIT_TIMEOUT;
 	default:
 		aq->dev_state = AP_DEV_STATE_ERROR;
@@ -335,7 +337,7 @@ static enum ap_sm_wait ap_sm_reset_wait(struct ap_queue *aq)
 	switch (status.response_code) {
 	case AP_RESPONSE_NORMAL:
 		lsi_ptr = ap_airq_ptr();
-		if (lsi_ptr && ap_queue_enable_interruption(aq, lsi_ptr) == 0)
+		if (lsi_ptr && ap_queue_enable_irq(aq, lsi_ptr) == 0)
 			aq->sm_state = AP_SM_STATE_SETIRQ_WAIT;
 		else
 			aq->sm_state = (aq->queue_count > 0) ?
@@ -376,7 +378,7 @@ static enum ap_sm_wait ap_sm_setirq_wait(struct ap_queue *aq)
 
 	if (status.irq_enabled == 1) {
 		/* Irqs are now enabled */
-		aq->interrupt = AP_INTR_ENABLED;
+		aq->interrupt = true;
 		aq->sm_state = (aq->queue_count > 0) ?
 			AP_SM_STATE_WORKING : AP_SM_STATE_IDLE;
 	}
@@ -566,7 +568,7 @@ static ssize_t interrupt_show(struct device *dev,
 	spin_lock_bh(&aq->lock);
 	if (aq->sm_state == AP_SM_STATE_SETIRQ_WAIT)
 		rc = scnprintf(buf, PAGE_SIZE, "Enable Interrupt pending.\n");
-	else if (aq->interrupt == AP_INTR_ENABLED)
+	else if (aq->interrupt)
 		rc = scnprintf(buf, PAGE_SIZE, "Interrupts enabled.\n");
 	else
 		rc = scnprintf(buf, PAGE_SIZE, "Interrupts disabled.\n");
@@ -747,7 +749,7 @@ struct ap_queue *ap_queue_create(ap_qid_t qid, int device_type)
 	aq->ap_dev.device.type = &ap_queue_type;
 	aq->ap_dev.device_type = device_type;
 	aq->qid = qid;
-	aq->interrupt = AP_INTR_DISABLED;
+	aq->interrupt = false;
 	spin_lock_init(&aq->lock);
 	INIT_LIST_HEAD(&aq->pendingq);
 	INIT_LIST_HEAD(&aq->requestq);
Signature · 1 line
2.30.2
author maintainer
#30 lore raw

PATCH 30/236 crypto: qat - fix reuse of completion variable

In reply to Greg Kroah-Hartman

From: Marco Chiappero <[email protected]>

[ Upstream commit 3d655732b0199562267a05c7ff69ecdd11632939 ]

Use reinit_completion() to set to a clean state a completion variable, used to coordinate the VF to PF request-response flow, before every new VF request.

---
 drivers/crypto/qat/qat_common/adf_pf2vf_msg.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/crypto/qat/qat_common/adf_pf2vf_msg.c +2 -0
index 8b090b7ae8c6..4c39731c51c8 100644
@@ -316,6 +316,8 @@ static int adf_vf2pf_request_version(struct adf_accel_dev *accel_dev)
 	msg |= ADF_PFVF_COMPATIBILITY_VERSION << ADF_VF2PF_COMPAT_VER_REQ_SHIFT;
 	BUILD_BUG_ON(ADF_PFVF_COMPATIBILITY_VERSION > 255);
 
+	reinit_completion(&accel_dev->vf.iov_msg_completion);
+
 	/* Send request from VF to PF */
 	ret = adf_iov_putmsg(accel_dev, msg, 0);
 	if (ret) {
Signature · 1 line
2.30.2
author maintainer
#31 lore raw

PATCH 31/236 crypto: qat - fix naming for init/shutdown VF to PF notifications

In reply to Greg Kroah-Hartman

From: Marco Chiappero <[email protected]>

[ Upstream commit b90c1c4d3fa8cd90f4e8245b13564380fd0bfad1 ]

At start and shutdown, VFs notify the PF about their state. These notifications are carried out through a message exchange using the PFVF protocol.

Function names lead to believe they do perform init or shutdown logic. This is to fix the naming to better reflect their purpose.

---
 drivers/crypto/qat/qat_c3xxxvf/adf_c3xxxvf_hw_data.c |  4 ++--
 drivers/crypto/qat/qat_c62xvf/adf_c62xvf_hw_data.c   |  4 ++--
 drivers/crypto/qat/qat_common/adf_common_drv.h       |  8 ++++----
 drivers/crypto/qat/qat_common/adf_vf2pf_msg.c        | 12 ++++++------
 .../qat/qat_dh895xccvf/adf_dh895xccvf_hw_data.c      |  4 ++--
 5 files changed, 16 insertions(+), 16 deletions(-)
drivers/crypto/qat/qat_c3xxxvf/adf_c3xxxvf_hw_data.c +2 -2
index d2fedbd7113c..9709f29b6454 100644
@@ -79,10 +79,10 @@ void adf_init_hw_data_c3xxxiov(struct adf_hw_device_data *hw_data)
 	hw_data->enable_error_correction = adf_vf_void_noop;
 	hw_data->init_admin_comms = adf_vf_int_noop;
 	hw_data->exit_admin_comms = adf_vf_void_noop;
-	hw_data->send_admin_init = adf_vf2pf_init;
+	hw_data->send_admin_init = adf_vf2pf_notify_init;
 	hw_data->init_arb = adf_vf_int_noop;
 	hw_data->exit_arb = adf_vf_void_noop;
-	hw_data->disable_iov = adf_vf2pf_shutdown;
+	hw_data->disable_iov = adf_vf2pf_notify_shutdown;
 	hw_data->get_accel_mask = get_accel_mask;
 	hw_data->get_ae_mask = get_ae_mask;
 	hw_data->get_num_accels = get_num_accels;
drivers/crypto/qat/qat_c62xvf/adf_c62xvf_hw_data.c +2 -2
index 29fd3f1091ab..5e6909d6cfc6 100644
@@ -79,10 +79,10 @@ void adf_init_hw_data_c62xiov(struct adf_hw_device_data *hw_data)
 	hw_data->enable_error_correction = adf_vf_void_noop;
 	hw_data->init_admin_comms = adf_vf_int_noop;
 	hw_data->exit_admin_comms = adf_vf_void_noop;
-	hw_data->send_admin_init = adf_vf2pf_init;
+	hw_data->send_admin_init = adf_vf2pf_notify_init;
 	hw_data->init_arb = adf_vf_int_noop;
 	hw_data->exit_arb = adf_vf_void_noop;
-	hw_data->disable_iov = adf_vf2pf_shutdown;
+	hw_data->disable_iov = adf_vf2pf_notify_shutdown;
 	hw_data->get_accel_mask = get_accel_mask;
 	hw_data->get_ae_mask = get_ae_mask;
 	hw_data->get_num_accels = get_num_accels;
drivers/crypto/qat/qat_common/adf_common_drv.h +4 -4
index f22342f612c1..469e06c93faf 100644
@@ -195,8 +195,8 @@ void adf_enable_vf2pf_interrupts(struct adf_accel_dev *accel_dev,
 void adf_enable_pf2vf_interrupts(struct adf_accel_dev *accel_dev);
 void adf_disable_pf2vf_interrupts(struct adf_accel_dev *accel_dev);
 
-int adf_vf2pf_init(struct adf_accel_dev *accel_dev);
-void adf_vf2pf_shutdown(struct adf_accel_dev *accel_dev);
+int adf_vf2pf_notify_init(struct adf_accel_dev *accel_dev);
+void adf_vf2pf_notify_shutdown(struct adf_accel_dev *accel_dev);
 int adf_init_pf_wq(void);
 void adf_exit_pf_wq(void);
 int adf_init_vf_wq(void);
@@ -219,12 +219,12 @@ static inline void adf_disable_pf2vf_interrupts(struct adf_accel_dev *accel_dev)
 {
 }
 
-static inline int adf_vf2pf_init(struct adf_accel_dev *accel_dev)
+static inline int adf_vf2pf_notify_init(struct adf_accel_dev *accel_dev)
 {
 	return 0;
 }
 
-static inline void adf_vf2pf_shutdown(struct adf_accel_dev *accel_dev)
+static inline void adf_vf2pf_notify_shutdown(struct adf_accel_dev *accel_dev)
 {
 }
 
drivers/crypto/qat/qat_common/adf_vf2pf_msg.c +6 -6
index 2c98fb63f7b7..54b738da829d 100644
@@ -5,14 +5,14 @@
 #include "adf_pf2vf_msg.h"
 
 /**
- * adf_vf2pf_init() - send init msg to PF
+ * adf_vf2pf_notify_init() - send init msg to PF
  * @accel_dev:  Pointer to acceleration VF device.
  *
  * Function sends an init messge from the VF to a PF
  *
  * Return: 0 on success, error code otherwise.
  */
-int adf_vf2pf_init(struct adf_accel_dev *accel_dev)
+int adf_vf2pf_notify_init(struct adf_accel_dev *accel_dev)
 {
 	u32 msg = (ADF_VF2PF_MSGORIGIN_SYSTEM |
 		(ADF_VF2PF_MSGTYPE_INIT << ADF_VF2PF_MSGTYPE_SHIFT));
@@ -25,17 +25,17 @@ int adf_vf2pf_init(struct adf_accel_dev *accel_dev)
 	set_bit(ADF_STATUS_PF_RUNNING, &accel_dev->status);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(adf_vf2pf_init);
+EXPORT_SYMBOL_GPL(adf_vf2pf_notify_init);
 
 /**
- * adf_vf2pf_shutdown() - send shutdown msg to PF
+ * adf_vf2pf_notify_shutdown() - send shutdown msg to PF
  * @accel_dev:  Pointer to acceleration VF device.
  *
  * Function sends a shutdown messge from the VF to a PF
  *
  * Return: void
  */
-void adf_vf2pf_shutdown(struct adf_accel_dev *accel_dev)
+void adf_vf2pf_notify_shutdown(struct adf_accel_dev *accel_dev)
 {
 	u32 msg = (ADF_VF2PF_MSGORIGIN_SYSTEM |
 	    (ADF_VF2PF_MSGTYPE_SHUTDOWN << ADF_VF2PF_MSGTYPE_SHIFT));
@@ -45,4 +45,4 @@ void adf_vf2pf_shutdown(struct adf_accel_dev *accel_dev)
 			dev_err(&GET_DEV(accel_dev),
 				"Failed to send Shutdown event to PF\n");
 }
-EXPORT_SYMBOL_GPL(adf_vf2pf_shutdown);
+EXPORT_SYMBOL_GPL(adf_vf2pf_notify_shutdown);
drivers/crypto/qat/qat_dh895xccvf/adf_dh895xccvf_hw_data.c +2 -2
index 5246f0524ca3..fc4cf141b1de 100644
@@ -79,10 +79,10 @@ void adf_init_hw_data_dh895xcciov(struct adf_hw_device_data *hw_data)
 	hw_data->enable_error_correction = adf_vf_void_noop;
 	hw_data->init_admin_comms = adf_vf_int_noop;
 	hw_data->exit_admin_comms = adf_vf_void_noop;
-	hw_data->send_admin_init = adf_vf2pf_init;
+	hw_data->send_admin_init = adf_vf2pf_notify_init;
 	hw_data->init_arb = adf_vf_int_noop;
 	hw_data->exit_arb = adf_vf_void_noop;
-	hw_data->disable_iov = adf_vf2pf_shutdown;
+	hw_data->disable_iov = adf_vf2pf_notify_shutdown;
 	hw_data->get_accel_mask = get_accel_mask;
 	hw_data->get_ae_mask = get_ae_mask;
 	hw_data->get_num_accels = get_num_accels;
Signature · 1 line
2.30.2
author maintainer
#5 lore raw

PATCH 5/236 sched/deadline: Fix reset_on_fork reporting of DL tasks

In reply to Greg Kroah-Hartman

From: Quentin Perret <[email protected]>

[ Upstream commit f95091536f78971b269ec321b057b8d630b0ad8a ]

It is possible for sched_getattr() to incorrectly report the state of the reset_on_fork flag when called on a deadline task.

Indeed, if the flag was set on a deadline task using sched_setattr() with flags (SCHED_FLAG_RESET_ON_FORK | SCHED_FLAG_KEEP_PARAMS), then p->sched_reset_on_fork will be set, but __setscheduler() will bail out early, which means that the dl_se->flags will not get updated by __setscheduler_params()->__setparam_dl(). Consequently, if sched_getattr() is then called on the task, __getparam_dl() will override kattr.sched_flags with the now out-of-date copy in dl_se->flags and report the stale value to userspace.

To fix this, make sure to only copy the flags that are relevant to sched_deadline to and from the dl_se->flags field.

---
 kernel/sched/deadline.c | 7 ++++---
 kernel/sched/sched.h    | 2 ++
 2 files changed, 6 insertions(+), 3 deletions(-)
kernel/sched/deadline.c +4 -3
index 6b98c1fe6e7f..82c76196a9d2 100644
@@ -2703,7 +2703,7 @@ void __setparam_dl(struct task_struct *p, const struct sched_attr *attr)
 	dl_se->dl_runtime = attr->sched_runtime;
 	dl_se->dl_deadline = attr->sched_deadline;
 	dl_se->dl_period = attr->sched_period ?: dl_se->dl_deadline;
-	dl_se->flags = attr->sched_flags;
+	dl_se->flags = attr->sched_flags & SCHED_DL_FLAGS;
 	dl_se->dl_bw = to_ratio(dl_se->dl_period, dl_se->dl_runtime);
 	dl_se->dl_density = to_ratio(dl_se->dl_deadline, dl_se->dl_runtime);
 }
@@ -2716,7 +2716,8 @@ void __getparam_dl(struct task_struct *p, struct sched_attr *attr)
 	attr->sched_runtime = dl_se->dl_runtime;
 	attr->sched_deadline = dl_se->dl_deadline;
 	attr->sched_period = dl_se->dl_period;
-	attr->sched_flags = dl_se->flags;
+	attr->sched_flags &= ~SCHED_DL_FLAGS;
+	attr->sched_flags |= dl_se->flags;
 }
 
 /*
@@ -2813,7 +2814,7 @@ bool dl_param_changed(struct task_struct *p, const struct sched_attr *attr)
 	if (dl_se->dl_runtime != attr->sched_runtime ||
 	    dl_se->dl_deadline != attr->sched_deadline ||
 	    dl_se->dl_period != attr->sched_period ||
-	    dl_se->flags != attr->sched_flags)
+	    dl_se->flags != (attr->sched_flags & SCHED_DL_FLAGS))
 		return true;
 
 	return false;
kernel/sched/sched.h +2 -0
index 39112ac7ab34..08db8e095e48 100644
@@ -226,6 +226,8 @@ static inline void update_avg(u64 *avg, u64 sample)
  */
 #define SCHED_FLAG_SUGOV	0x10000000
 
+#define SCHED_DL_FLAGS (SCHED_FLAG_RECLAIM | SCHED_FLAG_DL_OVERRUN | SCHED_FLAG_SUGOV)
+
 static inline bool dl_entity_is_special(struct sched_dl_entity *dl_se)
 {
 #ifdef CONFIG_CPU_FREQ_GOV_SCHEDUTIL
Signature · 1 line
2.30.2
author maintainer
#4 lore raw

PATCH 4/236 crypto: mxs-dcp - Check for DMA mapping errors

In reply to Greg Kroah-Hartman

From: Sean Anderson <[email protected]>

[ Upstream commit df6313d707e575a679ada3313358289af24454c0 ]

After calling dma_map_single(), we must also call dma_mapping_error(). This fixes the following warning when compiling with CONFIG_DMA_API_DEBUG:

[  311.241478] WARNING: CPU: 0 PID: 428 at kernel/dma/debug.c:1027 check_unmap+0x79c/0x96c
[  311.249547] DMA-API: mxs-dcp 2280000.crypto: device driver failed to check map error[device address=0x00000000860cb080] [size=32 bytes] [mapped as single]
---
 drivers/crypto/mxs-dcp.c | 45 +++++++++++++++++++++++++++++++---------
 1 file changed, 35 insertions(+), 10 deletions(-)
drivers/crypto/mxs-dcp.c +35 -10
index 909a7eb748e3..7daed8b78ac8 100644
@@ -169,15 +169,19 @@ static struct dcp *global_sdcp;
 
 static int mxs_dcp_start_dma(struct dcp_async_ctx *actx)
 {
+	int dma_err;
 	struct dcp *sdcp = global_sdcp;
 	const int chan = actx->chan;
 	uint32_t stat;
 	unsigned long ret;
 	struct dcp_dma_desc *desc = &sdcp->coh->desc[actx->chan];
-
 	dma_addr_t desc_phys = dma_map_single(sdcp->dev, desc, sizeof(*desc),
 					      DMA_TO_DEVICE);
 
+	dma_err = dma_mapping_error(sdcp->dev, desc_phys);
+	if (dma_err)
+		return dma_err;
+
 	reinit_completion(&sdcp->completion[chan]);
 
 	/* Clear status register. */
@@ -215,18 +219,29 @@ static int mxs_dcp_start_dma(struct dcp_async_ctx *actx)
 static int mxs_dcp_run_aes(struct dcp_async_ctx *actx,
 			   struct skcipher_request *req, int init)
 {
+	dma_addr_t key_phys, src_phys, dst_phys;
 	struct dcp *sdcp = global_sdcp;
 	struct dcp_dma_desc *desc = &sdcp->coh->desc[actx->chan];
 	struct dcp_aes_req_ctx *rctx = skcipher_request_ctx(req);
 	int ret;
 
-	dma_addr_t key_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_key,
-					     2 * AES_KEYSIZE_128,
-					     DMA_TO_DEVICE);
-	dma_addr_t src_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_in_buf,
-					     DCP_BUF_SZ, DMA_TO_DEVICE);
-	dma_addr_t dst_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_out_buf,
-					     DCP_BUF_SZ, DMA_FROM_DEVICE);
+	key_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_key,
+				  2 * AES_KEYSIZE_128, DMA_TO_DEVICE);
+	ret = dma_mapping_error(sdcp->dev, key_phys);
+	if (ret)
+		return ret;
+
+	src_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_in_buf,
+				  DCP_BUF_SZ, DMA_TO_DEVICE);
+	ret = dma_mapping_error(sdcp->dev, src_phys);
+	if (ret)
+		goto err_src;
+
+	dst_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_out_buf,
+				  DCP_BUF_SZ, DMA_FROM_DEVICE);
+	ret = dma_mapping_error(sdcp->dev, dst_phys);
+	if (ret)
+		goto err_dst;
 
 	if (actx->fill % AES_BLOCK_SIZE) {
 		dev_err(sdcp->dev, "Invalid block size!\n");
@@ -264,10 +279,12 @@ static int mxs_dcp_run_aes(struct dcp_async_ctx *actx,
 	ret = mxs_dcp_start_dma(actx);
 
 aes_done_run:
+	dma_unmap_single(sdcp->dev, dst_phys, DCP_BUF_SZ, DMA_FROM_DEVICE);
+err_dst:
+	dma_unmap_single(sdcp->dev, src_phys, DCP_BUF_SZ, DMA_TO_DEVICE);
+err_src:
 	dma_unmap_single(sdcp->dev, key_phys, 2 * AES_KEYSIZE_128,
 			 DMA_TO_DEVICE);
-	dma_unmap_single(sdcp->dev, src_phys, DCP_BUF_SZ, DMA_TO_DEVICE);
-	dma_unmap_single(sdcp->dev, dst_phys, DCP_BUF_SZ, DMA_FROM_DEVICE);
 
 	return ret;
 }
@@ -556,6 +573,10 @@ static int mxs_dcp_run_sha(struct ahash_request *req)
 	dma_addr_t buf_phys = dma_map_single(sdcp->dev, sdcp->coh->sha_in_buf,
 					     DCP_BUF_SZ, DMA_TO_DEVICE);
 
+	ret = dma_mapping_error(sdcp->dev, buf_phys);
+	if (ret)
+		return ret;
+
 	/* Fill in the DMA descriptor. */
 	desc->control0 = MXS_DCP_CONTROL0_DECR_SEMAPHORE |
 		    MXS_DCP_CONTROL0_INTERRUPT |
@@ -588,6 +609,10 @@ static int mxs_dcp_run_sha(struct ahash_request *req)
 	if (rctx->fini) {
 		digest_phys = dma_map_single(sdcp->dev, sdcp->coh->sha_out_buf,
 					     DCP_SHA_PAY_SZ, DMA_FROM_DEVICE);
+		ret = dma_mapping_error(sdcp->dev, digest_phys);
+		if (ret)
+			goto done_run;
+
 		desc->control0 |= MXS_DCP_CONTROL0_HASH_TERM;
 		desc->payload = digest_phys;
 	}
Signature · 1 line
2.30.2
author maintainer
#6 lore raw

PATCH 6/236 power: supply: axp288_fuel_gauge: Report register-address on readb / writeb errors

In reply to Greg Kroah-Hartman

From: Hans de Goede <[email protected]>

[ Upstream commit caa534c3ba40c6e8352b42cbbbca9ba481814ac8 ]

When fuel_gauge_reg_readb()/_writeb() fails, report which register we were trying to read / write when the error happened.

Also reword the message a bit:
- Drop the axp288 prefix, dev_err() already prints this
- Switch from telegram / abbreviated style to a normal sentence, aligning the message with those from fuel_gauge_read_*bit_word()

---
 drivers/power/supply/axp288_fuel_gauge.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/power/supply/axp288_fuel_gauge.c +2 -2
index 148eb8105803..be24529157be 100644
@@ -149,7 +149,7 @@ static int fuel_gauge_reg_readb(struct axp288_fg_info *info, int reg)
 	}
 
 	if (ret < 0) {
-		dev_err(&info->pdev->dev, "axp288 reg read err:%d\n", ret);
+		dev_err(&info->pdev->dev, "Error reading reg 0x%02x err: %d\n", reg, ret);
 		return ret;
 	}
 
@@ -163,7 +163,7 @@ static int fuel_gauge_reg_writeb(struct axp288_fg_info *info, int reg, u8 val)
 	ret = regmap_write(info->regmap, reg, (unsigned int)val);
 
 	if (ret < 0)
-		dev_err(&info->pdev->dev, "axp288 reg write err:%d\n", ret);
+		dev_err(&info->pdev->dev, "Error writing reg 0x%02x err: %d\n", reg, ret);
 
 	return ret;
 }
Signature · 1 line
2.30.2
author maintainer
#7 lore raw

PATCH 7/236 crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop()

In reply to Greg Kroah-Hartman

From: Tony Lindgren <[email protected]>

[ Upstream commit fe28140b3393b0ba1eb95cc109f974a7e58b26fd ]

We should not clear FLAGS_DMA_ACTIVE before omap_sham_update_dma_stop() is done calling dma_unmap_sg(). We already clear FLAGS_DMA_ACTIVE at the end of omap_sham_update_dma_stop().

The early clearing of FLAGS_DMA_ACTIVE is not causing issues as we do not need to defer anything based on FLAGS_DMA_ACTIVE currently. So this can be applied as clean-up.

---
 drivers/crypto/omap-sham.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/crypto/omap-sham.c +1 -1
index 39d17ed1db2f..f6a8ae8a18c2 100644
@@ -1735,7 +1735,7 @@ static void omap_sham_done_task(unsigned long data)
 		if (test_and_clear_bit(FLAGS_OUTPUT_READY, &dd->flags))
 			goto finish;
 	} else if (test_bit(FLAGS_DMA_READY, &dd->flags)) {
-		if (test_and_clear_bit(FLAGS_DMA_ACTIVE, &dd->flags)) {
+		if (test_bit(FLAGS_DMA_ACTIVE, &dd->flags)) {
 			omap_sham_update_dma_stop(dd);
 			if (dd->err) {
 				err = dd->err;
Signature · 1 line
2.30.2
author maintainer
#33 lore raw

PATCH 33/236 fcntl: fix potential deadlock for &fasync_struct.fa_lock

In reply to Greg Kroah-Hartman

From: Desmond Cheong Zhi Xi <[email protected]>

[ Upstream commit 2f488f698fda820f8e6fa0407630154eceb145d6 ]

There is an existing lock hierarchy of &dev->event_lock --> &fasync_struct.fa_lock --> &f->f_owner.lock from the following call chain:

  input_inject_event():
    spin_lock_irqsave(&dev->event_lock,...);
    input_handle_event():
      input_pass_values():
        input_to_handler():
          evdev_events():
            evdev_pass_values():
              spin_lock(&client->buffer_lock);
              __pass_event():
                kill_fasync():
                  kill_fasync_rcu():
                    read_lock(&fa->fa_lock);
                    send_sigio():
                      read_lock_irqsave(&fown->lock,...);

&dev->event_lock is HARDIRQ-safe, so interrupts have to be disabled while grabbing &fasync_struct.fa_lock, otherwise we invert the lock hierarchy. However, since kill_fasync which calls kill_fasync_rcu is an exported symbol, it may not necessarily be called with interrupts disabled.

As kill_fasync_rcu may be called with interrupts disabled (for example, in the call chain above), we replace calls to read_lock/read_unlock on &fasync_struct.fa_lock in kill_fasync_rcu with read_lock_irqsave/read_unlock_irqrestore.

---
 fs/fcntl.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
fs/fcntl.c +3 -2
index 05b36b28f2e8..71b43538fa44 100644
@@ -995,13 +995,14 @@ static void kill_fasync_rcu(struct fasync_struct *fa, int sig, int band)
 {
 	while (fa) {
 		struct fown_struct *fown;
+		unsigned long flags;
 
 		if (fa->magic != FASYNC_MAGIC) {
 			printk(KERN_ERR "kill_fasync: bad magic number in "
 			       "fasync_struct!\n");
 			return;
 		}
-		read_lock(&fa->fa_lock);
+		read_lock_irqsave(&fa->fa_lock, flags);
 		if (fa->fa_file) {
 			fown = &fa->fa_file->f_owner;
 			/* Don't send SIGURG to processes which have not set a
@@ -1010,7 +1011,7 @@ static void kill_fasync_rcu(struct fasync_struct *fa, int sig, int band)
 			if (!(sig == SIGURG && fown->signum == 0))
 				send_sigio(fown, fa->fa_fd, band);
 		}
-		read_unlock(&fa->fa_lock);
+		read_unlock_irqrestore(&fa->fa_lock, flags);
 		fa = rcu_dereference(fa->fa_next);
 	}
 }
Signature · 1 line
2.30.2
author maintainer
#60 lore raw

PATCH 60/236 tpm: ibmvtpm: Avoid error message when process gets signal while waiting

In reply to Greg Kroah-Hartman

From: Stefan Berger <[email protected]>

[ Upstream commit 047d4226b0bca1cda5267dc68bc8291cce5364ac ]

When rngd is run as root then lots of these types of message will appear in the kernel log if the TPM has been configured to provide random bytes:

[ 7406.275163] tpm tpm0: tpm_transmit: tpm_recv: error -4

The issue is caused by the following call that is interrupted while waiting for the TPM's response.

sig = wait_event_interruptible(ibmvtpm->wq, !ibmvtpm->tpm_processing_cmd);

Rather than waiting for the response in the low level driver, have it use the polling loop in tpm_try_transmit() that uses a command's duration to poll until a result has been returned by the TPM, thus ending when the timeout has occurred but not responding to signals and ctrl-c anymore. To stay in this polling loop extend tpm_ibmvtpm_status() to return 'true' for as long as the vTPM is indicated as being busy in tpm_processing_cmd. Since the loop requires the TPM's timeouts, get them now using tpm_get_timeouts() after setting the TPM2 version flag on the chip.

To recreat the resolved issue start rngd like this:

sudo rngd -r /dev/hwrng -t
sudo rngd -r /dev/tpm0 -t

---
 drivers/char/tpm/tpm_ibmvtpm.c | 26 +++++++++++++++-----------
 drivers/char/tpm/tpm_ibmvtpm.h |  2 +-
 2 files changed, 16 insertions(+), 12 deletions(-)
drivers/char/tpm/tpm_ibmvtpm.c +15 -11
index 994385bf37c0..3ca7528322f5 100644
@@ -106,17 +106,12 @@ static int tpm_ibmvtpm_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 {
 	struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
 	u16 len;
-	int sig;
 
 	if (!ibmvtpm->rtce_buf) {
 		dev_err(ibmvtpm->dev, "ibmvtpm device is not ready\n");
 		return 0;
 	}
 
-	sig = wait_event_interruptible(ibmvtpm->wq, !ibmvtpm->tpm_processing_cmd);
-	if (sig)
-		return -EINTR;
-
 	len = ibmvtpm->res_len;
 
 	if (count < len) {
@@ -237,7 +232,7 @@ static int tpm_ibmvtpm_send(struct tpm_chip *chip, u8 *buf, size_t count)
 	 * set the processing flag before the Hcall, since we may get the
 	 * result (interrupt) before even being able to check rc.
 	 */
-	ibmvtpm->tpm_processing_cmd = true;
+	ibmvtpm->tpm_processing_cmd = 1;
 
 again:
 	rc = ibmvtpm_send_crq(ibmvtpm->vdev,
@@ -255,7 +250,7 @@ again:
 			goto again;
 		}
 		dev_err(ibmvtpm->dev, "tpm_ibmvtpm_send failed rc=%d\n", rc);
-		ibmvtpm->tpm_processing_cmd = false;
+		ibmvtpm->tpm_processing_cmd = 0;
 	}
 
 	spin_unlock(&ibmvtpm->rtce_lock);
@@ -269,7 +264,9 @@ static void tpm_ibmvtpm_cancel(struct tpm_chip *chip)
 
 static u8 tpm_ibmvtpm_status(struct tpm_chip *chip)
 {
-	return 0;
+	struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
+
+	return ibmvtpm->tpm_processing_cmd;
 }
 
 /**
@@ -459,7 +456,7 @@ static const struct tpm_class_ops tpm_ibmvtpm = {
 	.send = tpm_ibmvtpm_send,
 	.cancel = tpm_ibmvtpm_cancel,
 	.status = tpm_ibmvtpm_status,
-	.req_complete_mask = 0,
+	.req_complete_mask = 1,
 	.req_complete_val = 0,
 	.req_canceled = tpm_ibmvtpm_req_canceled,
 };
@@ -552,7 +549,7 @@ static void ibmvtpm_crq_process(struct ibmvtpm_crq *crq,
 		case VTPM_TPM_COMMAND_RES:
 			/* len of the data in rtce buffer */
 			ibmvtpm->res_len = be16_to_cpu(crq->len);
-			ibmvtpm->tpm_processing_cmd = false;
+			ibmvtpm->tpm_processing_cmd = 0;
 			wake_up_interruptible(&ibmvtpm->wq);
 			return;
 		default:
@@ -690,8 +687,15 @@ static int tpm_ibmvtpm_probe(struct vio_dev *vio_dev,
 		goto init_irq_cleanup;
 	}
 
-	if (!strcmp(id->compat, "IBM,vtpm20")) {
+
+	if (!strcmp(id->compat, "IBM,vtpm20"))
 		chip->flags |= TPM_CHIP_FLAG_TPM2;
+
+	rc = tpm_get_timeouts(chip);
+	if (rc)
+		goto init_irq_cleanup;
+
+	if (chip->flags & TPM_CHIP_FLAG_TPM2) {
 		rc = tpm2_get_cc_attrs_tbl(chip);
 		if (rc)
 			goto init_irq_cleanup;
drivers/char/tpm/tpm_ibmvtpm.h +1 -1
index b92aa7d3e93e..51198b137461 100644
@@ -41,7 +41,7 @@ struct ibmvtpm_dev {
 	wait_queue_head_t wq;
 	u16 res_len;
 	u32 vtpm_version;
-	bool tpm_processing_cmd;
+	u8 tpm_processing_cmd;
 };
 
 #define CRQ_RES_BUF_SIZE	PAGE_SIZE
Signature · 1 line
2.30.2
author maintainer
#8 lore raw

PATCH 8/236 sched/deadline: Fix missing clock update in migrate_task_rq_dl()

In reply to Greg Kroah-Hartman

From: Dietmar Eggemann <[email protected]>

[ Upstream commit b4da13aa28d4fd0071247b7b41c579ee8a86c81a ]

A missing clock update is causing the following warning:

rq->clock_update_flags < RQCF_ACT_SKIP

WARNING: CPU: 112 PID: 2041 at kernel/sched/sched.h:1453
sub_running_bw.isra.0+0x190/0x1a0
...
CPU: 112 PID: 2041 Comm: sugov:112 Tainted: G W 5.14.0-rc1 #1
Hardware name: WIWYNN Mt.Jade Server System
B81.030Z1.0007/Mt.Jade Motherboard, BIOS 1.6.20210526 (SCP:
1.06.20210526) 2021/05/26
...
Call trace:
  sub_running_bw.isra.0+0x190/0x1a0
  migrate_task_rq_dl+0xf8/0x1e0
  set_task_cpu+0xa8/0x1f0
  try_to_wake_up+0x150/0x3d4
  wake_up_q+0x64/0xc0
  __up_write+0xd0/0x1c0
  up_write+0x4c/0x2b0
  cppc_set_perf+0x120/0x2d0
  cppc_cpufreq_set_target+0xe0/0x1a4 [cppc_cpufreq]
  __cpufreq_driver_target+0x74/0x140
  sugov_work+0x64/0x80
  kthread_worker_fn+0xe0/0x230
  kthread+0x138/0x140
  ret_from_fork+0x10/0x18

The task causing this is the cppc_fie DL task introduced by commit 1eb5dde674f5 ("cpufreq: CPPC: Add support for frequency invariance").

With CONFIG_ACPI_CPPC_CPUFREQ_FIE=y and schedutil cpufreq governor on slow-switching system (like on this Ampere Altra WIWYNN Mt. Jade Arm Server):

DL task curr=sugov:112 lets p=cppc_fie migrate and since the latter is in non_contending state, migrate_task_rq_dl() calls

sub_running_bw()->__sub_running_bw()->cpufreq_update_util()-> rq_clock()->assert_clock_updated()

on p.

Fix this by updating the clock for a non_contending task in migrate_task_rq_dl() before calling sub_running_bw().

---
 kernel/sched/deadline.c | 1 +
 1 file changed, 1 insertion(+)
kernel/sched/deadline.c +1 -0
index 82c76196a9d2..a3ae00c348a8 100644
@@ -1735,6 +1735,7 @@ static void migrate_task_rq_dl(struct task_struct *p, int new_cpu __maybe_unused
 	 */
 	raw_spin_lock(&rq->lock);
 	if (p->dl.dl_non_contending) {
+		update_rq_clock(rq);
 		sub_running_bw(&p->dl, &rq->dl);
 		p->dl.dl_non_contending = 0;
 		/*
Signature · 1 line
2.30.2
author maintainer
#34 lore raw

PATCH 34/236 udf_get_extendedattr() had no boundary checks.

In reply to Greg Kroah-Hartman

From: Stian Skjelstad <[email protected]>

[ Upstream commit 58bc6d1be2f3b0ceecb6027dfa17513ec6aa2abb ]

When parsing the ExtendedAttr data, malicous or corrupt attribute length could cause kernel hangs and buffer overruns in some special cases.

---
 fs/udf/misc.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)
fs/udf/misc.c +11 -2
index eab94527340d..1614d308d0f0 100644
@@ -173,13 +173,22 @@ struct genericFormat *udf_get_extendedattr(struct inode *inode, uint32_t type,
 		else
 			offset = le32_to_cpu(eahd->appAttrLocation);
 
-		while (offset < iinfo->i_lenEAttr) {
+		while (offset + sizeof(*gaf) < iinfo->i_lenEAttr) {
+			uint32_t attrLength;
+
 			gaf = (struct genericFormat *)&ea[offset];
+			attrLength = le32_to_cpu(gaf->attrLength);
+
+			/* Detect undersized elements and buffer overflows */
+			if ((attrLength < sizeof(*gaf)) ||
+			    (attrLength > (iinfo->i_lenEAttr - offset)))
+				break;
+
 			if (le32_to_cpu(gaf->attrType) == type &&
 					gaf->attrSubtype == subtype)
 				return gaf;
 			else
-				offset += le32_to_cpu(gaf->attrLength);
+				offset += attrLength;
 		}
 	}
 
Signature · 1 line
2.30.2
author maintainer
#35 lore raw

PATCH 35/236 s390/kasan: fix large PMD pages address alignment check

In reply to Greg Kroah-Hartman

From: Alexander Gordeev <[email protected]>

[ Upstream commit ddd63c85ef67ea9ea7282ad35eafb6568047126e ]

It is currently possible to initialize a large PMD page when the address is not aligned on page boundary.

---
 arch/s390/mm/kasan_init.c | 41 +++++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 21 deletions(-)
arch/s390/mm/kasan_init.c +20 -21
index 5646b39c728a..e9a9b7b616bc 100644
@@ -108,6 +108,9 @@ static void __init kasan_early_vmemmap_populate(unsigned long address,
 		sgt_prot &= ~_SEGMENT_ENTRY_NOEXEC;
 	}
 
+	/*
+	 * The first 1MB of 1:1 mapping is mapped with 4KB pages
+	 */
 	while (address < end) {
 		pg_dir = pgd_offset_k(address);
 		if (pgd_none(*pg_dir)) {
@@ -165,30 +168,26 @@ static void __init kasan_early_vmemmap_populate(unsigned long address,
 
 		pm_dir = pmd_offset(pu_dir, address);
 		if (pmd_none(*pm_dir)) {
-			if (mode == POPULATE_ZERO_SHADOW &&
-			    IS_ALIGNED(address, PMD_SIZE) &&
+			if (IS_ALIGNED(address, PMD_SIZE) &&
 			    end - address >= PMD_SIZE) {
-				pmd_populate(&init_mm, pm_dir,
-						kasan_early_shadow_pte);
-				address = (address + PMD_SIZE) & PMD_MASK;
-				continue;
-			}
-			/* the first megabyte of 1:1 is mapped with 4k pages */
-			if (has_edat && address && end - address >= PMD_SIZE &&
-			    mode != POPULATE_ZERO_SHADOW) {
-				void *page;
-
-				if (mode == POPULATE_ONE2ONE) {
-					page = (void *)address;
-				} else {
-					page = kasan_early_alloc_segment();
-					memset(page, 0, _SEGMENT_SIZE);
+				if (mode == POPULATE_ZERO_SHADOW) {
+					pmd_populate(&init_mm, pm_dir, kasan_early_shadow_pte);
+					address = (address + PMD_SIZE) & PMD_MASK;
+					continue;
+				} else if (has_edat && address) {
+					void *page;
+
+					if (mode == POPULATE_ONE2ONE) {
+						page = (void *)address;
+					} else {
+						page = kasan_early_alloc_segment();
+						memset(page, 0, _SEGMENT_SIZE);
+					}
+					pmd_val(*pm_dir) = __pa(page) | sgt_prot;
+					address = (address + PMD_SIZE) & PMD_MASK;
+					continue;
 				}
-				pmd_val(*pm_dir) = __pa(page) | sgt_prot;
-				address = (address + PMD_SIZE) & PMD_MASK;
-				continue;
 			}
-
 			pt_dir = kasan_early_pte_alloc();
 			pmd_populate(&init_mm, pm_dir, pt_dir);
 		} else if (pmd_large(*pm_dir)) {
Signature · 1 line
2.30.2
author maintainer
#26 lore raw

PATCH 26/236 libata: fix ata_host_start()

In reply to Greg Kroah-Hartman

From: Damien Le Moal <[email protected]>

[ Upstream commit 355a8031dc174450ccad2a61c513ad7222d87a97 ]

The loop on entry of ata_host_start() may not initialize host->ops to a non NULL value. The test on the host_stop field of host->ops must then be preceded by a check that host->ops is not NULL.

---
 drivers/ata/libata-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/ata/libata-core.c +1 -1
index 61c762961ca8..44f434acfce0 100644
@@ -5573,7 +5573,7 @@ int ata_host_start(struct ata_host *host)
 			have_stop = 1;
 	}
 
-	if (host->ops->host_stop)
+	if (host->ops && host->ops->host_stop)
 		have_stop = 1;
 
 	if (have_stop) {
Signature · 1 line
2.30.2
author maintainer
#62 lore raw

PATCH 62/236 spi: davinci: invoke chipselect callback

In reply to Greg Kroah-Hartman

From: Matija Glavinic Pecotic <[email protected]>

[ Upstream commit ea4ab99cb58cc9f8d64c0961ff9a059825f304cf ]

Davinci needs to configure chipselect on transfer.

---
 drivers/spi/spi-davinci.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)
drivers/spi/spi-davinci.c +1 -7
index 7453a1dbbc06..fda73221f3b7 100644
@@ -213,12 +213,6 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
 	 * line for the controller
 	 */
 	if (spi->cs_gpiod) {
-		/*
-		 * FIXME: is this code ever executed? This host does not
-		 * set SPI_MASTER_GPIO_SS so this chipselect callback should
-		 * not get called from the SPI core when we are using
-		 * GPIOs for chip select.
-		 */
 		if (value == BITBANG_CS_ACTIVE)
 			gpiod_set_value(spi->cs_gpiod, 1);
 		else
@@ -950,7 +944,7 @@ static int davinci_spi_probe(struct platform_device *pdev)
 	master->bus_num = pdev->id;
 	master->num_chipselect = pdata->num_chipselect;
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16);
-	master->flags = SPI_MASTER_MUST_RX;
+	master->flags = SPI_MASTER_MUST_RX | SPI_MASTER_GPIO_SS;
 	master->setup = davinci_spi_setup;
 	master->cleanup = davinci_spi_cleanup;
 	master->can_dma = davinci_spi_can_dma;
Signature · 1 line
2.30.2
author maintainer
#72 lore raw

PATCH 72/236 media: TDA1997x: enable EDID support

In reply to Greg Kroah-Hartman

From: Krzysztof Hałasa <[email protected]>

[ Upstream commit ea3e1c36e38810427485f06c2becc1f29e54521d ]

Without this patch, the TDA19971 chip's EDID is inactive. EDID never worked with this driver, it was all tested with HDMI signal sources which don't need EDID support.

Fixes 9ac0038db9a7 ("media: i2c: Add TDA1997x HDMI receiver driver")
---
 drivers/media/i2c/tda1997x.c | 1 +
 1 file changed, 1 insertion(+)
drivers/media/i2c/tda1997x.c +1 -0
index 89bb7e6dc7a4..9554c8348c02 100644
@@ -2233,6 +2233,7 @@ static int tda1997x_core_init(struct v4l2_subdev *sd)
 	/* get initial HDMI status */
 	state->hdmi_status = io_read(sd, REG_HDMI_FLAGS);
 
+	io_write(sd, REG_EDID_ENABLE, EDID_ENABLE_A_EN | EDID_ENABLE_B_EN);
 	return 0;
 }
 
Signature · 1 line
2.30.2
author maintainer
#73 lore raw

PATCH 73/236 leds: is31fl32xx: Fix missing error code in is31fl32xx_parse_dt()

In reply to Greg Kroah-Hartman

From: Jiapeng Chong <[email protected]>

[ Upstream commit e642197562cd9781453f835e1406cfe0feeb917e ]

The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'ret'.

Eliminate the follow smatch warning:

drivers/leds/leds-is31fl32xx.c:388 is31fl32xx_parse_dt() warn: missing error code 'ret'.

Fixes 9d7cffaf99f5 ("leds: Add driver for the ISSI IS31FL32xx family of LED controllers")
---
 drivers/leds/leds-is31fl32xx.c | 1 +
 1 file changed, 1 insertion(+)
drivers/leds/leds-is31fl32xx.c +1 -0
index 2180255ad339..899ed94b6687 100644
@@ -385,6 +385,7 @@ static int is31fl32xx_parse_dt(struct device *dev,
 			dev_err(dev,
 				"Node %pOF 'reg' conflicts with another LED\n",
 				child);
+			ret = -EINVAL;
 			goto err;
 		}
 
Signature · 1 line
2.30.2
author maintainer
#76 lore raw

PATCH 76/236 drm/of: free the right object

In reply to Greg Kroah-Hartman

From: Julia Lawall <[email protected]>

[ Upstream commit b557a5f8da5798d27370ed6b73e673aae33efd55 ]

There is no need to free a NULL value. Instead, free the object that is leaking due to the iterator.

The semantic patch that finds this problem is as follows:

// <smpl>
@@
expression x,e;
identifier f;
@@
x = f(...);

 if (x == NULL) {
	... when any
	    when != x = e
*	of_node_put(x);
	...

}
// </smpl>

Fixes 6529007522de ("drm: of: Add drm_of_lvds_get_dual_link_pixel_order")
---
 drivers/gpu/drm/drm_of.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/drm_of.c +1 -1
index ca04c34e8251..197c57477344 100644
@@ -315,7 +315,7 @@ static int drm_of_lvds_get_remote_pixels_type(
 
 		remote_port = of_graph_get_remote_port(endpoint);
 		if (!remote_port) {
-			of_node_put(remote_port);
+			of_node_put(endpoint);
 			return -EPIPE;
 		}
 
Signature · 1 line
2.30.2
author maintainer
#77 lore raw

PATCH 77/236 bpf: Fix a typo of reuseport map in bpf.h.

In reply to Greg Kroah-Hartman

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit f170acda7ffaf0473d06e1e17c12cd9fd63904f5 ]

Fix s/BPF_MAP_TYPE_REUSEPORT_ARRAY/BPF_MAP_TYPE_REUSEPORT_SOCKARRAY/ typo in bpf.h.

---
 include/uapi/linux/bpf.h       | 2 +-
 tools/include/uapi/linux/bpf.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
include/uapi/linux/bpf.h +1 -1
index 556216dc9703..762bf87c26a3 100644
@@ -2450,7 +2450,7 @@ union bpf_attr {
  * long bpf_sk_select_reuseport(struct sk_reuseport_md *reuse, struct bpf_map *map, void *key, u64 flags)
  *	Description
  *		Select a **SO_REUSEPORT** socket from a
- *		**BPF_MAP_TYPE_REUSEPORT_ARRAY** *map*.
+ *		**BPF_MAP_TYPE_REUSEPORT_SOCKARRAY** *map*.
  *		It checks the selected socket is matching the incoming
  *		request in the socket buffer.
  *	Return
tools/include/uapi/linux/bpf.h +1 -1
index 556216dc9703..762bf87c26a3 100644
@@ -2450,7 +2450,7 @@ union bpf_attr {
  * long bpf_sk_select_reuseport(struct sk_reuseport_md *reuse, struct bpf_map *map, void *key, u64 flags)
  *	Description
  *		Select a **SO_REUSEPORT** socket from a
- *		**BPF_MAP_TYPE_REUSEPORT_ARRAY** *map*.
+ *		**BPF_MAP_TYPE_REUSEPORT_SOCKARRAY** *map*.
  *		It checks the selected socket is matching the incoming
  *		request in the socket buffer.
  *	Return
Signature · 1 line
2.30.2
author maintainer
#78 lore raw

PATCH 78/236 bpf: Fix potential memleak and UAF in the verifier.

In reply to Greg Kroah-Hartman

From: He Fengqing <[email protected]>

[ Upstream commit 75f0fc7b48ad45a2e5736bcf8de26c8872fe8695 ]

In bpf_patch_insn_data(), we first use the bpf_patch_insn_single() to insert new instructions, then use adjust_insn_aux_data() to adjust insn_aux_data. If the old env->prog have no enough room for new inserted instructions, we use bpf_prog_realloc to construct new_prog and free the old env->prog.

There have two errors here. First, if adjust_insn_aux_data() return ENOMEM, we should free the new_prog. Second, if adjust_insn_aux_data() return ENOMEM, bpf_patch_insn_data() will return NULL, and env->prog has been freed in bpf_prog_realloc, but we will use it in bpf_check().

So in this patch, we make the adjust_insn_aux_data() never fails. In bpf_patch_insn_data(), we first pre-malloc memory for the new insn_aux_data, then call bpf_patch_insn_single() to insert new instructions, at last call adjust_insn_aux_data() to adjust insn_aux_data.

Fixes 8041902dae52 ("bpf: adjust insn_aux_data when patching insns")
---
 kernel/bpf/verifier.c | 27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)
kernel/bpf/verifier.c +16 -11
index 29d4f4e37595..78f24b19f6b1 100644
@@ -10456,10 +10456,11 @@ static void convert_pseudo_ld_imm64(struct bpf_verifier_env *env)
  * insni[off, off + cnt).  Adjust corresponding insn_aux_data by copying
  * [0, off) and [off, end) to new locations, so the patched range stays zero
  */
-static int adjust_insn_aux_data(struct bpf_verifier_env *env,
-				struct bpf_prog *new_prog, u32 off, u32 cnt)
+static void adjust_insn_aux_data(struct bpf_verifier_env *env,
+				 struct bpf_insn_aux_data *new_data,
+				 struct bpf_prog *new_prog, u32 off, u32 cnt)
 {
-	struct bpf_insn_aux_data *new_data, *old_data = env->insn_aux_data;
+	struct bpf_insn_aux_data *old_data = env->insn_aux_data;
 	struct bpf_insn *insn = new_prog->insnsi;
 	u32 old_seen = old_data[off].seen;
 	u32 prog_len;
@@ -10472,12 +10473,9 @@ static int adjust_insn_aux_data(struct bpf_verifier_env *env,
 	old_data[off].zext_dst = insn_has_def32(env, insn + off + cnt - 1);
 
 	if (cnt == 1)
-		return 0;
+		return;
 	prog_len = new_prog->len;
-	new_data = vzalloc(array_size(prog_len,
-				      sizeof(struct bpf_insn_aux_data)));
-	if (!new_data)
-		return -ENOMEM;
+
 	memcpy(new_data, old_data, sizeof(struct bpf_insn_aux_data) * off);
 	memcpy(new_data + off + cnt - 1, old_data + off,
 	       sizeof(struct bpf_insn_aux_data) * (prog_len - off - cnt + 1));
@@ -10488,7 +10486,6 @@ static int adjust_insn_aux_data(struct bpf_verifier_env *env,
 	}
 	env->insn_aux_data = new_data;
 	vfree(old_data);
-	return 0;
 }
 
 static void adjust_subprog_starts(struct bpf_verifier_env *env, u32 off, u32 len)
@@ -10523,6 +10520,14 @@ static struct bpf_prog *bpf_patch_insn_data(struct bpf_verifier_env *env, u32 of
 					    const struct bpf_insn *patch, u32 len)
 {
 	struct bpf_prog *new_prog;
+	struct bpf_insn_aux_data *new_data = NULL;
+
+	if (len > 1) {
+		new_data = vzalloc(array_size(env->prog->len + len - 1,
+					      sizeof(struct bpf_insn_aux_data)));
+		if (!new_data)
+			return NULL;
+	}
 
 	new_prog = bpf_patch_insn_single(env->prog, off, patch, len);
 	if (IS_ERR(new_prog)) {
@@ -10530,10 +10535,10 @@ static struct bpf_prog *bpf_patch_insn_data(struct bpf_verifier_env *env, u32 of
 			verbose(env,
 				"insn %d cannot be patched due to 16-bit range\n",
 				env->insn_aux_data[off].orig_idx);
+		vfree(new_data);
 		return NULL;
 	}
-	if (adjust_insn_aux_data(env, new_prog, off, len))
-		return NULL;
+	adjust_insn_aux_data(env, new_data, new_prog, off, len);
 	adjust_subprog_starts(env, off, len);
 	adjust_poke_descs(new_prog, off, len);
 	return new_prog;
Signature · 1 line
2.30.2
author maintainer
#79 lore raw

PATCH 79/236 drm/of: free the iterator object on failure

In reply to Greg Kroah-Hartman

From: Steven Price <[email protected]>

[ Upstream commit 6f9223a56fabc840836b49de27dc7b27642c6a32 ]

When bailing out due to the sanity check the iterator value needs to be freed because the early return prevents for_each_child_of_node() from doing the dereference itself.

Fixes 6529007522de ("drm: of: Add drm_of_lvds_get_dual_link_pixel_order")
---
 drivers/gpu/drm/drm_of.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/drm_of.c +3 -1
index 197c57477344..997b8827fed2 100644
@@ -331,8 +331,10 @@ static int drm_of_lvds_get_remote_pixels_type(
 		 * configurations by passing the endpoints explicitly to
 		 * drm_of_lvds_get_dual_link_pixel_order().
 		 */
-		if (!current_pt || pixels_type != current_pt)
+		if (!current_pt || pixels_type != current_pt) {
+			of_node_put(endpoint);
 			return -EINVAL;
+		}
 	}
 
 	return pixels_type;
Signature · 1 line
2.30.2
author maintainer
#80 lore raw

PATCH 80/236 gve: fix the wrong AdminQ buffer overflow check

In reply to Greg Kroah-Hartman

From: Haiyue Wang <[email protected]>

[ Upstream commit 63a9192b8fa1ea55efeba1f18fad52bb24d9bf12 ]

The 'tail' pointer is also free-running count, so it needs to be masked as 'adminq_prod_cnt' does, to become an index value of AdminQ buffer.

Fixes 5cdad90de62c ("gve: Batch AQ commands for creating and destroying queues.")
---
 drivers/net/ethernet/google/gve/gve_adminq.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/net/ethernet/google/gve/gve_adminq.c +4 -2
index 24ae6a28a806..6009d76e41fc 100644
@@ -182,7 +182,8 @@ static int gve_adminq_issue_cmd(struct gve_priv *priv,
 	tail = ioread32be(&priv->reg_bar0->adminq_event_counter);
 
 	// Check if next command will overflow the buffer.
-	if (((priv->adminq_prod_cnt + 1) & priv->adminq_mask) == tail) {
+	if (((priv->adminq_prod_cnt + 1) & priv->adminq_mask) ==
+	    (tail & priv->adminq_mask)) {
 		int err;
 
 		// Flush existing commands to make room.
@@ -192,7 +193,8 @@ static int gve_adminq_issue_cmd(struct gve_priv *priv,
 
 		// Retry.
 		tail = ioread32be(&priv->reg_bar0->adminq_event_counter);
-		if (((priv->adminq_prod_cnt + 1) & priv->adminq_mask) == tail) {
+		if (((priv->adminq_prod_cnt + 1) & priv->adminq_mask) ==
+		    (tail & priv->adminq_mask)) {
 			// This should never happen. We just flushed the
 			// command queue so there should be enough space.
 			return -ENOMEM;
Signature · 1 line
2.30.2
author maintainer
#63 lore raw

PATCH 63/236 blk-crypto: fix check for too-large dun_bytes

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

[ Upstream commit cc40b7225151f611ef837f6403cfaeadc7af214a ]

dun_bytes needs to be less than or equal to the IV size of the encryption mode, not just less than or equal to BLK_CRYPTO_MAX_IV_SIZE.

Currently this doesn't matter since blk_crypto_init_key() is never actually passed invalid values, but we might as well fix this.

Fixes a892c8d52c02 ("block: Inline encryption support for blk-mq")
---
 block/blk-crypto.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
block/blk-crypto.c +1 -1
index 5da43f0973b4..5ffa9aab49de 100644
@@ -332,7 +332,7 @@ int blk_crypto_init_key(struct blk_crypto_key *blk_key, const u8 *raw_key,
 	if (mode->keysize == 0)
 		return -EINVAL;
 
-	if (dun_bytes == 0 || dun_bytes > BLK_CRYPTO_MAX_IV_SIZE)
+	if (dun_bytes == 0 || dun_bytes > mode->ivsize)
 		return -EINVAL;
 
 	if (!is_power_of_2(data_unit_size))
Signature · 1 line
2.30.2
author maintainer
#81 lore raw

PATCH 81/236 libbpf: Fix the possible memory leak on error

In reply to Greg Kroah-Hartman

From: Shuyi Cheng <[email protected]>

[ Upstream commit 18353c87e0e0440d4c7c746ed740738bbc1b538e ]

If the strdup() fails then we need to call bpf_object__close(obj) to avoid a resource leak.

Fixes 166750bc1dd2 ("libbpf: Support libbpf-provided extern variables")
---
 tools/lib/bpf/libbpf.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
tools/lib/bpf/libbpf.c +4 -2
index 95eef7ebdac5..04cde732d686 100644
@@ -6907,8 +6907,10 @@ __bpf_object__open(const char *path, const void *obj_buf, size_t obj_buf_sz,
 	kconfig = OPTS_GET(opts, kconfig, NULL);
 	if (kconfig) {
 		obj->kconfig = strdup(kconfig);
-		if (!obj->kconfig)
-			return ERR_PTR(-ENOMEM);
+		if (!obj->kconfig) {
+			err = -ENOMEM;
+			goto out;
+		}
 	}
 
 	err = bpf_object__elf_init(obj);
Signature · 1 line
2.30.2
author maintainer
#82 lore raw

PATCH 82/236 ARM: dts: aspeed-g6: Fix HVI3C function-group in pinctrl dtsi

In reply to Greg Kroah-Hartman

From: Dylan Hung <[email protected]>

[ Upstream commit 8c295b7f3d01359ff4336fcb6e406e6ed37957d6 ]

The HVI3C shall be a group of I3C function, not an independent function. Correct the function name from "HVI3C" to "I3C".

Fixes f510f04c8c83 ("ARM: dts: aspeed: Add AST2600 pinmux nodes")
---
 arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi +2 -2
index 7028e21bdd98..910eacc8ad3b 100644
@@ -208,12 +208,12 @@
 	};
 
 	pinctrl_hvi3c3_default: hvi3c3_default {
-		function = "HVI3C3";
+		function = "I3C3";
 		groups = "HVI3C3";
 	};
 
 	pinctrl_hvi3c4_default: hvi3c4_default {
-		function = "HVI3C4";
+		function = "I3C4";
 		groups = "HVI3C4";
 	};
 
Signature · 1 line
2.30.2
author maintainer
#37 lore raw

PATCH 37/236 s390/debug: keep debug data on resize

In reply to Greg Kroah-Hartman

From: Peter Oberparleiter <[email protected]>

[ Upstream commit 1204777867e8486a88dbb4793fe256b31ea05eeb ]

Any previously recorded s390dbf debug data is reset when a debug area is resized using the 'pages' sysfs attribute. This can make live-debugging unnecessarily complex.

Fix this by copying existing debug data to the newly allocated debug area when resizing.

---
 arch/s390/kernel/debug.c | 74 ++++++++++++++++++++++++++++------------
 1 file changed, 53 insertions(+), 21 deletions(-)
arch/s390/kernel/debug.c +53 -21
index b6619ae9a3e0..e392d3e42b1d 100644
@@ -24,6 +24,7 @@
 #include <linux/export.h>
 #include <linux/init.h>
 #include <linux/fs.h>
+#include <linux/minmax.h>
 #include <linux/debugfs.h>
 
 #include <asm/debug.h>
@@ -92,6 +93,8 @@ static int debug_hex_ascii_format_fn(debug_info_t *id, struct debug_view *view,
 				     char *out_buf, const char *in_buf);
 static int debug_sprintf_format_fn(debug_info_t *id, struct debug_view *view,
 				   char *out_buf, debug_sprintf_entry_t *curr_event);
+static void debug_areas_swap(debug_info_t *a, debug_info_t *b);
+static void debug_events_append(debug_info_t *dest, debug_info_t *src);
 
 /* globals */
 
@@ -726,35 +729,28 @@ EXPORT_SYMBOL(debug_unregister);
  */
 static int debug_set_size(debug_info_t *id, int nr_areas, int pages_per_area)
 {
-	debug_entry_t ***new_areas;
+	debug_info_t *new_id;
 	unsigned long flags;
-	int rc = 0;
 
 	if (!id || (nr_areas <= 0) || (pages_per_area < 0))
 		return -EINVAL;
-	if (pages_per_area > 0) {
-		new_areas = debug_areas_alloc(pages_per_area, nr_areas);
-		if (!new_areas) {
-			pr_info("Allocating memory for %i pages failed\n",
-				pages_per_area);
-			rc = -ENOMEM;
-			goto out;
-		}
-	} else {
-		new_areas = NULL;
+
+	new_id = debug_info_alloc("", pages_per_area, nr_areas, id->buf_size,
+				  id->level, ALL_AREAS);
+	if (!new_id) {
+		pr_info("Allocating memory for %i pages failed\n",
+			pages_per_area);
+		return -ENOMEM;
 	}
+
 	spin_lock_irqsave(&id->lock, flags);
-	debug_areas_free(id);
-	id->areas = new_areas;
-	id->nr_areas = nr_areas;
-	id->pages_per_area = pages_per_area;
-	id->active_area = 0;
-	memset(id->active_entries, 0, sizeof(int)*id->nr_areas);
-	memset(id->active_pages, 0, sizeof(int)*id->nr_areas);
+	debug_events_append(new_id, id);
+	debug_areas_swap(new_id, id);
+	debug_info_free(new_id);
 	spin_unlock_irqrestore(&id->lock, flags);
 	pr_info("%s: set new size (%i pages)\n", id->name, pages_per_area);
-out:
-	return rc;
+
+	return 0;
 }
 
 /**
@@ -821,6 +817,42 @@ static inline debug_entry_t *get_active_entry(debug_info_t *id)
 				  id->active_entries[id->active_area]);
 }
 
+/* Swap debug areas of a and b. */
+static void debug_areas_swap(debug_info_t *a, debug_info_t *b)
+{
+	swap(a->nr_areas, b->nr_areas);
+	swap(a->pages_per_area, b->pages_per_area);
+	swap(a->areas, b->areas);
+	swap(a->active_area, b->active_area);
+	swap(a->active_pages, b->active_pages);
+	swap(a->active_entries, b->active_entries);
+}
+
+/* Append all debug events in active area from source to destination log. */
+static void debug_events_append(debug_info_t *dest, debug_info_t *src)
+{
+	debug_entry_t *from, *to, *last;
+
+	if (!src->areas || !dest->areas)
+		return;
+
+	/* Loop over all entries in src, starting with oldest. */
+	from = get_active_entry(src);
+	last = from;
+	do {
+		if (from->clock != 0LL) {
+			to = get_active_entry(dest);
+			memset(to, 0, dest->entry_size);
+			memcpy(to, from, min(src->entry_size,
+					     dest->entry_size));
+			proceed_active_entry(dest);
+		}
+
+		proceed_active_entry(src);
+		from = get_active_entry(src);
+	} while (from != last);
+}
+
 /*
  * debug_finish_entry:
  * - set timestamp, caller address, cpu number etc.
Signature · 1 line
2.30.2
author maintainer
#38 lore raw

PATCH 38/236 s390/debug: fix debug area life cycle

In reply to Greg Kroah-Hartman

From: Peter Oberparleiter <[email protected]>

[ Upstream commit 9372a82892c2caa6bccab9a4081166fa769699f8 ]

Currently allocation and registration of s390dbf debug areas are tied together. As a result, a debug area cannot be unregistered and re-registered while any process has an associated debugfs file open.

Fix this by splitting alloc/release from register/unregister.

---
 arch/s390/kernel/debug.c | 102 +++++++++++++++++++++------------------
 1 file changed, 56 insertions(+), 46 deletions(-)
arch/s390/kernel/debug.c +56 -46
index e392d3e42b1d..89fbfb3b1e01 100644
@@ -314,24 +314,6 @@ static debug_info_t *debug_info_create(const char *name, int pages_per_area,
 		goto out;
 
 	rc->mode = mode & ~S_IFMT;
-
-	/* create root directory */
-	rc->debugfs_root_entry = debugfs_create_dir(rc->name,
-						    debug_debugfs_root_entry);
-
-	/* append new element to linked list */
-	if (!debug_area_first) {
-		/* first element in list */
-		debug_area_first = rc;
-		rc->prev = NULL;
-	} else {
-		/* append element to end of list */
-		debug_area_last->next = rc;
-		rc->prev = debug_area_last;
-	}
-	debug_area_last = rc;
-	rc->next = NULL;
-
 	refcount_set(&rc->ref_count, 1);
 out:
 	return rc;
@@ -391,27 +373,10 @@ static void debug_info_get(debug_info_t *db_info)
  */
 static void debug_info_put(debug_info_t *db_info)
 {
-	int i;
-
 	if (!db_info)
 		return;
-	if (refcount_dec_and_test(&db_info->ref_count)) {
-		for (i = 0; i < DEBUG_MAX_VIEWS; i++) {
-			if (!db_info->views[i])
-				continue;
-			debugfs_remove(db_info->debugfs_entries[i]);
-		}
-		debugfs_remove(db_info->debugfs_root_entry);
-		if (db_info == debug_area_first)
-			debug_area_first = db_info->next;
-		if (db_info == debug_area_last)
-			debug_area_last = db_info->prev;
-		if (db_info->prev)
-			db_info->prev->next = db_info->next;
-		if (db_info->next)
-			db_info->next->prev = db_info->prev;
+	if (refcount_dec_and_test(&db_info->ref_count))
 		debug_info_free(db_info);
-	}
 }
 
 /*
@@ -635,6 +600,31 @@ static int debug_close(struct inode *inode, struct file *file)
 	return 0; /* success */
 }
 
+/* Create debugfs entries and add to internal list. */
+static void _debug_register(debug_info_t *id)
+{
+	/* create root directory */
+	id->debugfs_root_entry = debugfs_create_dir(id->name,
+						    debug_debugfs_root_entry);
+
+	/* append new element to linked list */
+	if (!debug_area_first) {
+		/* first element in list */
+		debug_area_first = id;
+		id->prev = NULL;
+	} else {
+		/* append element to end of list */
+		debug_area_last->next = id;
+		id->prev = debug_area_last;
+	}
+	debug_area_last = id;
+	id->next = NULL;
+
+	debug_register_view(id, &debug_level_view);
+	debug_register_view(id, &debug_flush_view);
+	debug_register_view(id, &debug_pages_view);
+}
+
 /**
  * debug_register_mode() - creates and initializes debug area.
  *
@@ -664,19 +654,16 @@ debug_info_t *debug_register_mode(const char *name, int pages_per_area,
 	if ((uid != 0) || (gid != 0))
 		pr_warn("Root becomes the owner of all s390dbf files in sysfs\n");
 	BUG_ON(!initialized);
-	mutex_lock(&debug_mutex);
 
 	/* create new debug_info */
 	rc = debug_info_create(name, pages_per_area, nr_areas, buf_size, mode);
-	if (!rc)
-		goto out;
-	debug_register_view(rc, &debug_level_view);
-	debug_register_view(rc, &debug_flush_view);
-	debug_register_view(rc, &debug_pages_view);
-out:
-	if (!rc)
+	if (rc) {
+		mutex_lock(&debug_mutex);
+		_debug_register(rc);
+		mutex_unlock(&debug_mutex);
+	} else {
 		pr_err("Registering debug feature %s failed\n", name);
-	mutex_unlock(&debug_mutex);
+	}
 	return rc;
 }
 EXPORT_SYMBOL(debug_register_mode);
@@ -705,6 +692,27 @@ debug_info_t *debug_register(const char *name, int pages_per_area,
 }
 EXPORT_SYMBOL(debug_register);
 
+/* Remove debugfs entries and remove from internal list. */
+static void _debug_unregister(debug_info_t *id)
+{
+	int i;
+
+	for (i = 0; i < DEBUG_MAX_VIEWS; i++) {
+		if (!id->views[i])
+			continue;
+		debugfs_remove(id->debugfs_entries[i]);
+	}
+	debugfs_remove(id->debugfs_root_entry);
+	if (id == debug_area_first)
+		debug_area_first = id->next;
+	if (id == debug_area_last)
+		debug_area_last = id->prev;
+	if (id->prev)
+		id->prev->next = id->next;
+	if (id->next)
+		id->next->prev = id->prev;
+}
+
 /**
  * debug_unregister() - give back debug area.
  *
@@ -718,8 +726,10 @@ void debug_unregister(debug_info_t *id)
 	if (!id)
 		return;
 	mutex_lock(&debug_mutex);
-	debug_info_put(id);
+	_debug_unregister(id);
 	mutex_unlock(&debug_mutex);
+
+	debug_info_put(id);
 }
 EXPORT_SYMBOL(debug_unregister);
 
Signature · 1 line
2.30.2
author maintainer
#36 lore raw

PATCH 36/236 s390/pci: fix misleading rc in clp_set_pci_fn()

In reply to Greg Kroah-Hartman

From: Niklas Schnelle <[email protected]>

[ Upstream commit f7addcdd527a6dddfebe20c358b87bdb95624612 ]

Currently clp_set_pci_fn() always returns 0 as long as the CLP request itself succeeds even if the operation itself returns a response code other than CLP_RC_OK or CLP_RC_SETPCIFN_ALRDY. This is highly misleading because calling code assumes that a zero rc means that the operation was successful.

Fix this by returning the response code or cc on failure with the exception of the special handling for CLP_RC_SETPCIFN_ALRDY. Also let's not assume that the returned function handle for CLP_RC_SETPCIFN_ALRDY is 0, we don't need it anyway.

---
 arch/s390/pci/pci.c     |  7 ++++---
 arch/s390/pci/pci_clp.c | 33 ++++++++++++++++-----------------
 2 files changed, 20 insertions(+), 20 deletions(-)
arch/s390/pci/pci.c +4 -3
index ca1a105e3b5d..0ddb1fe353dc 100644
@@ -659,9 +659,10 @@ int zpci_enable_device(struct zpci_dev *zdev)
 {
 	int rc;
 
-	rc = clp_enable_fh(zdev, ZPCI_NR_DMA_SPACES);
-	if (rc)
+	if (clp_enable_fh(zdev, ZPCI_NR_DMA_SPACES)) {
+		rc = -EIO;
 		goto out;
+	}
 
 	rc = zpci_dma_init_device(zdev);
 	if (rc)
@@ -684,7 +685,7 @@ int zpci_disable_device(struct zpci_dev *zdev)
 	 * The zPCI function may already be disabled by the platform, this is
 	 * detected in clp_disable_fh() which becomes a no-op.
 	 */
-	return clp_disable_fh(zdev);
+	return clp_disable_fh(zdev) ? -EIO : 0;
 }
 EXPORT_SYMBOL_GPL(zpci_disable_device);
 
arch/s390/pci/pci_clp.c +16 -17
index d3331596ddbe..0a0e8b8293be 100644
@@ -213,15 +213,19 @@ out:
 }
 
 static int clp_refresh_fh(u32 fid);
-/*
- * Enable/Disable a given PCI function and update its function handle if
- * necessary
+/**
+ * clp_set_pci_fn() - Execute a command on a PCI function
+ * @zdev: Function that will be affected
+ * @nr_dma_as: DMA address space number
+ * @command: The command code to execute
+ *
+ * Returns: 0 on success, < 0 for Linux errors (e.g. -ENOMEM), and
+ * > 0 for non-success platform responses
  */
 static int clp_set_pci_fn(struct zpci_dev *zdev, u8 nr_dma_as, u8 command)
 {
 	struct clp_req_rsp_set_pci *rrb;
 	int rc, retries = 100;
-	u32 fid = zdev->fid;
 
 	rrb = clp_alloc_block(GFP_KERNEL);
 	if (!rrb)
@@ -245,17 +249,16 @@ static int clp_set_pci_fn(struct zpci_dev *zdev, u8 nr_dma_as, u8 command)
 		}
 	} while (rrb->response.hdr.rsp == CLP_RC_SETPCIFN_BUSY);
 
-	if (rc || rrb->response.hdr.rsp != CLP_RC_OK) {
-		zpci_err("Set PCI FN:\n");
-		zpci_err_clp(rrb->response.hdr.rsp, rc);
-	}
-
 	if (!rc && rrb->response.hdr.rsp == CLP_RC_OK) {
 		zdev->fh = rrb->response.fh;
-	} else if (!rc && rrb->response.hdr.rsp == CLP_RC_SETPCIFN_ALRDY &&
-			rrb->response.fh == 0) {
+	} else if (!rc && rrb->response.hdr.rsp == CLP_RC_SETPCIFN_ALRDY) {
 		/* Function is already in desired state - update handle */
-		rc = clp_refresh_fh(fid);
+		rc = clp_refresh_fh(zdev->fid);
+	} else {
+		zpci_err("Set PCI FN:\n");
+		zpci_err_clp(rrb->response.hdr.rsp, rc);
+		if (!rc)
+			rc = rrb->response.hdr.rsp;
 	}
 	clp_free_block(rrb);
 	return rc;
@@ -301,17 +304,13 @@ int clp_enable_fh(struct zpci_dev *zdev, u8 nr_dma_as)
 
 	rc = clp_set_pci_fn(zdev, nr_dma_as, CLP_SET_ENABLE_PCI_FN);
 	zpci_dbg(3, "ena fid:%x, fh:%x, rc:%d\n", zdev->fid, zdev->fh, rc);
-	if (rc)
-		goto out;
-
-	if (zpci_use_mio(zdev)) {
+	if (!rc && zpci_use_mio(zdev)) {
 		rc = clp_set_pci_fn(zdev, nr_dma_as, CLP_SET_ENABLE_MIO);
 		zpci_dbg(3, "ena mio fid:%x, fh:%x, rc:%d\n",
 				zdev->fid, zdev->fh, rc);
 		if (rc)
 			clp_disable_fh(zdev);
 	}
-out:
 	return rc;
 }
 
Signature · 1 line
2.30.2
author maintainer
#27 lore raw

PATCH 27/236 crypto: omap - Fix inconsistent locking of device lists

In reply to Greg Kroah-Hartman

From: Ben Hutchings <[email protected]>

[ Upstream commit fe4d55773b879c785ae61da9b1c2160f0110f67e ]

lockdep complains that in omap-aes, the list_lock is taken both with softirqs enabled at probe time, and also in softirq context, which could lead to a deadlock:

    ================================
    WARNING: inconsistent lock state
    5.14.0-rc1-00035-gc836005b01c5-dirty #69 Not tainted
    --------------------------------
    inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
    ksoftirqd/0/7 [HC0[0]:SC1[3]:HE1:SE0] takes:
    bf00e014 (list_lock){+.?.}-{2:2}, at: omap_aes_find_dev+0x18/0x54 [omap_aes_driver]
    {SOFTIRQ-ON-W} state was registered at:
      _raw_spin_lock+0x40/0x50
      omap_aes_probe+0x1d4/0x664 [omap_aes_driver]
      platform_probe+0x58/0xb8
      really_probe+0xbc/0x314
      __driver_probe_device+0x80/0xe4
      driver_probe_device+0x30/0xc8
      __driver_attach+0x70/0xf4
      bus_for_each_dev+0x70/0xb4
      bus_add_driver+0xf0/0x1d4
      driver_register+0x74/0x108
      do_one_initcall+0x84/0x2e4
      do_init_module+0x5c/0x240
      load_module+0x221c/0x2584
      sys_finit_module+0xb0/0xec
      ret_fast_syscall+0x0/0x2c
      0xbed90b30
    irq event stamp: 111800
    hardirqs last  enabled at (111800): [<c02a21e4>] __kmalloc+0x484/0x5ec
    hardirqs last disabled at (111799): [<c02a21f0>] __kmalloc+0x490/0x5ec
    softirqs last  enabled at (111776): [<c01015f0>] __do_softirq+0x2b8/0x4d0
    softirqs last disabled at (111781): [<c0135948>] run_ksoftirqd+0x34/0x50

    other info that might help us debug this:
     Possible unsafe locking scenario:

           CPU0
           ----
      lock(list_lock);
      <Interrupt>
        lock(list_lock);

     *** DEADLOCK ***

    2 locks held by ksoftirqd/0/7:
     #0: c0f5e8c8 (rcu_read_lock){....}-{1:2}, at: netif_receive_skb+0x6c/0x260
     #1: c0f5e8c8 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0x2c/0xdc

    stack backtrace:
    CPU: 0 PID: 7 Comm: ksoftirqd/0 Not tainted 5.14.0-rc1-00035-gc836005b01c5-dirty #69
    Hardware name: Generic AM43 (Flattened Device Tree)
    [<c010e6e0>] (unwind_backtrace) from [<c010b9d0>] (show_stack+0x10/0x14)
    [<c010b9d0>] (show_stack) from [<c017c640>] (mark_lock.part.17+0x5bc/0xd04)
    [<c017c640>] (mark_lock.part.17) from [<c017d9e4>] (__lock_acquire+0x960/0x2fa4)
    [<c017d9e4>] (__lock_acquire) from [<c0180980>] (lock_acquire+0x10c/0x358)
    [<c0180980>] (lock_acquire) from [<c093d324>] (_raw_spin_lock_bh+0x44/0x58)
    [<c093d324>] (_raw_spin_lock_bh) from [<bf00b258>] (omap_aes_find_dev+0x18/0x54 [omap_aes_driver])
    [<bf00b258>] (omap_aes_find_dev [omap_aes_driver]) from [<bf00b328>] (omap_aes_crypt+0x94/0xd4 [omap_aes_driver])
    [<bf00b328>] (omap_aes_crypt [omap_aes_driver]) from [<c08ac6d0>] (esp_input+0x1b0/0x2c8)
    [<c08ac6d0>] (esp_input) from [<c08c9e90>] (xfrm_input+0x410/0x1290)
    [<c08c9e90>] (xfrm_input) from [<c08b6374>] (xfrm4_esp_rcv+0x54/0x11c)
    [<c08b6374>] (xfrm4_esp_rcv) from [<c0838840>] (ip_protocol_deliver_rcu+0x48/0x3bc)
    [<c0838840>] (ip_protocol_deliver_rcu) from [<c0838c50>] (ip_local_deliver_finish+0x9c/0xdc)
    [<c0838c50>] (ip_local_deliver_finish) from [<c0838dd8>] (ip_local_deliver+0x148/0x1b0)
    [<c0838dd8>] (ip_local_deliver) from [<c0838f5c>] (ip_rcv+0x11c/0x180)
    [<c0838f5c>] (ip_rcv) from [<c077e3a4>] (__netif_receive_skb_one_core+0x54/0x74)
    [<c077e3a4>] (__netif_receive_skb_one_core) from [<c077e588>] (netif_receive_skb+0xa8/0x260)
    [<c077e588>] (netif_receive_skb) from [<c068d6d4>] (cpsw_rx_handler+0x224/0x2fc)
    [<c068d6d4>] (cpsw_rx_handler) from [<c0688ccc>] (__cpdma_chan_process+0xf4/0x188)
    [<c0688ccc>] (__cpdma_chan_process) from [<c068a0c0>] (cpdma_chan_process+0x3c/0x5c)
    [<c068a0c0>] (cpdma_chan_process) from [<c0690e14>] (cpsw_rx_mq_poll+0x44/0x98)
    [<c0690e14>] (cpsw_rx_mq_poll) from [<c0780810>] (__napi_poll+0x28/0x268)
    [<c0780810>] (__napi_poll) from [<c0780c64>] (net_rx_action+0xcc/0x204)
    [<c0780c64>] (net_rx_action) from [<c0101478>] (__do_softirq+0x140/0x4d0)
    [<c0101478>] (__do_softirq) from [<c0135948>] (run_ksoftirqd+0x34/0x50)
    [<c0135948>] (run_ksoftirqd) from [<c01583b8>] (smpboot_thread_fn+0xf4/0x1d8)
    [<c01583b8>] (smpboot_thread_fn) from [<c01546dc>] (kthread+0x14c/0x174)
    [<c01546dc>] (kthread) from [<c010013c>] (ret_from_fork+0x14/0x38)
    ...

The omap-des and omap-sham drivers appear to have a similar issue.

Fix this by using spin_{,un}lock_bh() around device list access in all the probe and remove functions.

---
 drivers/crypto/omap-aes.c  |  8 ++++----
 drivers/crypto/omap-des.c  |  8 ++++----
 drivers/crypto/omap-sham.c | 12 ++++++------
 3 files changed, 14 insertions(+), 14 deletions(-)
drivers/crypto/omap-aes.c +4 -4
index 0dd4c6b157de..9b968ac4ee7b 100644
@@ -1175,9 +1175,9 @@ static int omap_aes_probe(struct platform_device *pdev)
 	spin_lock_init(&dd->lock);
 
 	INIT_LIST_HEAD(&dd->list);
-	spin_lock(&list_lock);
+	spin_lock_bh(&list_lock);
 	list_add_tail(&dd->list, &dev_list);
-	spin_unlock(&list_lock);
+	spin_unlock_bh(&list_lock);
 
 	/* Initialize crypto engine */
 	dd->engine = crypto_engine_alloc_init(dev, 1);
@@ -1264,9 +1264,9 @@ static int omap_aes_remove(struct platform_device *pdev)
 	if (!dd)
 		return -ENODEV;
 
-	spin_lock(&list_lock);
+	spin_lock_bh(&list_lock);
 	list_del(&dd->list);
-	spin_unlock(&list_lock);
+	spin_unlock_bh(&list_lock);
 
 	for (i = dd->pdata->algs_info_size - 1; i >= 0; i--)
 		for (j = dd->pdata->algs_info[i].registered - 1; j >= 0; j--) {
drivers/crypto/omap-des.c +4 -4
index c9d38bcfd1c7..7fdf38e07adf 100644
@@ -1035,9 +1035,9 @@ static int omap_des_probe(struct platform_device *pdev)
 
 
 	INIT_LIST_HEAD(&dd->list);
-	spin_lock(&list_lock);
+	spin_lock_bh(&list_lock);
 	list_add_tail(&dd->list, &dev_list);
-	spin_unlock(&list_lock);
+	spin_unlock_bh(&list_lock);
 
 	/* Initialize des crypto engine */
 	dd->engine = crypto_engine_alloc_init(dev, 1);
@@ -1096,9 +1096,9 @@ static int omap_des_remove(struct platform_device *pdev)
 	if (!dd)
 		return -ENODEV;
 
-	spin_lock(&list_lock);
+	spin_lock_bh(&list_lock);
 	list_del(&dd->list);
-	spin_unlock(&list_lock);
+	spin_unlock_bh(&list_lock);
 
 	for (i = dd->pdata->algs_info_size - 1; i >= 0; i--)
 		for (j = dd->pdata->algs_info[i].registered - 1; j >= 0; j--)
drivers/crypto/omap-sham.c +6 -6
index f6a8ae8a18c2..48f78e34cf8d 100644
@@ -2143,9 +2143,9 @@ static int omap_sham_probe(struct platform_device *pdev)
 		(rev & dd->pdata->major_mask) >> dd->pdata->major_shift,
 		(rev & dd->pdata->minor_mask) >> dd->pdata->minor_shift);
 
-	spin_lock(&sham.lock);
+	spin_lock_bh(&sham.lock);
 	list_add_tail(&dd->list, &sham.dev_list);
-	spin_unlock(&sham.lock);
+	spin_unlock_bh(&sham.lock);
 
 	dd->engine = crypto_engine_alloc_init(dev, 1);
 	if (!dd->engine) {
@@ -2193,9 +2193,9 @@ err_algs:
 err_engine_start:
 	crypto_engine_exit(dd->engine);
 err_engine:
-	spin_lock(&sham.lock);
+	spin_lock_bh(&sham.lock);
 	list_del(&dd->list);
-	spin_unlock(&sham.lock);
+	spin_unlock_bh(&sham.lock);
 err_pm:
 	pm_runtime_disable(dev);
 	if (!dd->polling_mode)
@@ -2214,9 +2214,9 @@ static int omap_sham_remove(struct platform_device *pdev)
 	dd = platform_get_drvdata(pdev);
 	if (!dd)
 		return -ENODEV;
-	spin_lock(&sham.lock);
+	spin_lock_bh(&sham.lock);
 	list_del(&dd->list);
-	spin_unlock(&sham.lock);
+	spin_unlock_bh(&sham.lock);
 	for (i = dd->pdata->algs_info_size - 1; i >= 0; i--)
 		for (j = dd->pdata->algs_info[i].registered - 1; j >= 0; j--) {
 			crypto_unregister_ahash(
Signature · 1 line
2.30.2

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 5.10.65-rc1 review

This is the start of the stable review cycle for the 5.10.65 release. There are 236 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 15 Sep 2021 13:10:21 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.65-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.10.65-rc1

Linus Walleij <[email protected]>
clk: kirkwood: Fix a clocking boot regression

Daniel Thompson <[email protected]>
backlight: pwm_bl: Improve bootloader/kernel device handover

Tetsuo Handa <[email protected]>
fbmem: don't allow too huge resolutions

THOBY Simon <[email protected]>
IMA: remove the dependency on CRYPTO_MD5

Austin Kim <[email protected]>
IMA: remove -Wmissing-prototypes warning

Miklos Szeredi <[email protected]>
fuse: flush extending writes

Miklos Szeredi <[email protected]>
fuse: truncate pagecache on atomic_o_trunc

Claudiu Beznea <[email protected]>
ARM: dts: at91: add pinctrl-{names, 0} for all gpios

Sean Christopherson <[email protected]>
KVM: nVMX: Unconditionally clear nested.pi_pending on nested VM-Enter

Maxim Levitsky <[email protected]>
KVM: VMX: avoid running vmx_handle_exit_irqoff in case of emulation

Zelin Deng <[email protected]>
KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted

Halil Pasic <[email protected]>

    KVM: s390: index kvm->arch.idle_mask by vcpu_idx

Sean Christopherson <[email protected]>
Revert "KVM: x86: mmu: Add guest physical address check in translate_gpa()"

Babu Moger <[email protected]>
x86/resctrl: Fix a maybe-uninitialized build warning treated as error

Kim Phillips <[email protected]>
perf/x86/amd/ibs: Extend PERF_PMU_CAP_NO_EXCLUDE to IBS Op

Nguyen Dinh Phi <[email protected]>
tty: Fix data race between tiocsti() and flush_to_ldisc()

Pavel Begunkov <[email protected]>
bio: fix page leak bio_add_hw_page failure

Jens Axboe <[email protected]>
io_uring: IORING_OP_WRITE needs hash_reg_file set

Lukas Hannen <[email protected]>
time: Handle negative seconds correctly in timespec64_to_ns()

Jaegeuk Kim <[email protected]>
f2fs: guarantee to write dirty data when enabling checkpoint back

Justin M. Forbes <[email protected]>
iwlwifi Add support for ax201 in Samsung Galaxy Book Flex2 Alpha

Douglas Anderson <[email protected]>

    ASoC: rt5682: Remove unused variable in rt5682_i2c_remove()

Eric Dumazet <[email protected]>
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()

Sunil Goutham <[email protected]>
octeontx2-af: Set proper errorcode for IPv4 checksum errors

Subbaraya Sundeep <[email protected]>
octeontx2-af: Fix static code analyzer reported issues

Subbaraya Sundeep <[email protected]>
octeontx2-af: Fix loop in free and unmap counter

Stefan Wahren <[email protected]>
net: qualcomm: fix QCA7000 checksum handling

Xiyu Yang <[email protected]>
net: sched: Fix qdisc_rate_table refcount leak when get tcf_block failed

Eric Dumazet <[email protected]>
ipv4: make exception cache less predictible

Eric Dumazet <[email protected]>
ipv6: make exception cache less predictible

Ahmad Fatoum <[email protected]>
brcmfmac: pcie: fix oops on failure to resume and reprobe

Zenghui Yu <[email protected]>
bcma: Fix memory leak for internally-handled cores

Sudarsana Reddy Kalluru <[email protected]>
atlantic: Fix driver resume flow.

Dan Carpenter <[email protected]>
ath6kl: wmi: fix an error code in ath6kl_wmi_sync_point()

Brett Creeley <[email protected]>
ice: Only lock to update netdev dev_addr

Abhishek Naik <[email protected]>
iwlwifi: skip first element in the WTAS ACPI table

Emmanuel Grumbach <[email protected]>
iwlwifi: follow the new inclusive terminology

Christophe JAILLET <[email protected]>
ASoC: wcd9335: Disable irq on slave ports in the remove function

Christophe JAILLET <[email protected]>
ASoC: wcd9335: Fix a memory leak in the error handling path of the probe function

Christophe JAILLET <[email protected]>
ASoC: wcd9335: Fix a double irq free in the remove function

Andy Duan <[email protected]>
tty: serial: fsl_lpuart: fix the wrong mapbase value

Christophe JAILLET <[email protected]>
usb: bdc: Fix a resource leak in the error handling path of 'bdc_probe()'

Christophe JAILLET <[email protected]>
usb: bdc: Fix an error handling path in 'bdc_probe()' when no suitable DMA config is available

Evgeny Novikov <[email protected]>
usb: ehci-orion: Handle errors of clk_prepare_enable() in probe

Sergey Shtylyov <[email protected]>
i2c: xlp9xx: fix main IRQ check

Sergey Shtylyov <[email protected]>
i2c: mt65xx: fix IRQ check

Len Baker <[email protected]>
CIFS: Fix a potencially linear read overflow

Andrey Ignatov <[email protected]>
bpf: Fix possible out of bound write in narrow load handling

Tony Lindgren <[email protected]>
mmc: moxart: Fix issue with uninitialized dma_slave_config

Tony Lindgren <[email protected]>
mmc: dw_mmc: Fix issue with uninitialized dma_slave_config

Tony Lindgren <[email protected]>
mmc: sdhci: Fix issue with uninitialized dma_slave_config

Cezary Rojewski <[email protected]>
ASoC: Intel: Skylake: Fix module resource and format selection

Cezary Rojewski <[email protected]>
ASoC: Intel: Skylake: Leave data as is when invoking TLV IPCs

Cezary Rojewski <[email protected]>

    ASoC: Intel: kbl_da7219_max98927: Fix format selection for max98373

Dan Carpenter <[email protected]>
rsi: fix an error code in rsi_probe()

Dan Carpenter <[email protected]>
rsi: fix error code in rsi_load_9116_firmware()

Bob Peterson <[email protected]>
gfs2: init system threads before freeze lock

Sergey Shtylyov <[email protected]>
i2c: hix5hd2: fix IRQ check

Tian Tao <[email protected]>
i2c: fix platform_get_irq.cocci warnings

Sergey Shtylyov <[email protected]>

    i2c: s3c2410: fix IRQ check

Sergey Shtylyov <[email protected]>
i2c: iop3xx: fix deferred probing

Pavel Skripkin <[email protected]>
Bluetooth: add timeout sanity check to hci_inquiry

Kevin Mitchell <[email protected]>
lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ

Xu Yu <[email protected]>
mm/swap: consider max pages in iomap_swapfile_add_extent

Nadezda Lutovinova <[email protected]>
usb: gadget: mv_u3d: request_irq() after initializing UDC

Christophe JAILLET <[email protected]>
firmware: raspberrypi: Fix a leak in 'rpi_firmware_get()'

Nicolas Saenz Julienne <[email protected]>
firmware: raspberrypi: Keep count of all consumers

Sergey Shtylyov <[email protected]>
i2c: synquacer: fix deferred probing

Lukas Bulwahn <[email protected]>
clk: staging: correct reference to config IOMEM to config HAS_IOMEM

Pali Rohár <[email protected]>
arm64: dts: marvell: armada-37xx: Extend PCIe MEM space

J. Bruce Fields <[email protected]>
nfsd4: Fix forced-expiry locking

Benjamin Coddington <[email protected]>
lockd: Fix invalid lockowner cast after vfs_test_lock

Thomas Gleixner <[email protected]>
locking/local_lock: Add missing owner initialization

Peter Zijlstra <[email protected]>
locking/lockdep: Mark local_lock_t

Chih-Kang Chang <[email protected]>
mac80211: Fix insufficient headroom issue for AMSDU

Andrii Nakryiko <[email protected]>
libbpf: Re-build libbpf.so when libbpf.map changes

Sergey Shtylyov <[email protected]>
usb: phy: tahvo: add IRQ check

Sergey Shtylyov <[email protected]>
usb: host: ohci-tmio: add IRQ check

Valentin Schneider <[email protected]>
PM: cpu: Make notifier chain use a raw_spinlock_t

Kai-Heng Feng <[email protected]>
Bluetooth: Move shutdown callback before flushing tx and rx queue

Juhee Kang <[email protected]>
samples: pktgen: add missing IPv6 option to pktgen scripts

Leon Romanovsky <[email protected]>
devlink: Clear whole devlink_flash_notify struct

Ilya Leoshkevich <[email protected]>
selftests/bpf: Fix test_core_autosize on big-endian machines

Geert Uytterhoeven <[email protected]>
usb: gadget: udc: renesas_usb3: Fix soc_device_match() abuse

Sergey Shtylyov <[email protected]>
usb: phy: twl6030: add IRQ checks

Sergey Shtylyov <[email protected]>
usb: phy: fsl-usb: add IRQ check

Sergey Shtylyov <[email protected]>
usb: gadget: udc: s3c2410: add IRQ check

Sergey Shtylyov <[email protected]>
usb: gadget: udc: at91: add IRQ check

Sergey Shtylyov <[email protected]>
usb: dwc3: qcom: add IRQ check

Sergey Shtylyov <[email protected]>
usb: dwc3: meson-g12a: add IRQ check

Douglas Anderson <[email protected]>
ASoC: rt5682: Properly turn off regulators if wrong device ID

Stephen Boyd <[email protected]>
ASoC: rt5682: Implement remove callback

Parav Pandit <[email protected]>
net/mlx5: Fix unpublish devlink parameters

Aya Levin <[email protected]>
net/mlx5: Register to devlink ingress VLAN filter trap

Christophe JAILLET <[email protected]>
drm/msm/dsi: Fix some reference counted resource leaks

Desmond Cheong Zhi Xi <[email protected]>
Bluetooth: fix repeated calls to sco_sock_kill

Curtis Malainey <[email protected]>
ASoC: Intel: Fix platform ID matching

Waiman Long <[email protected]>
cgroup/cpuset: Fix violation of cpuset locking rule

Waiman Long <[email protected]>
cgroup/cpuset: Miscellaneous code cleanup

William Breathitt Gray <[email protected]>
counter: 104-quad-8: Return error when invalid mode during ceiling_write

Krzysztof Kozlowski <[email protected]>
arm64: dts: exynos: correct GIC CPU interfaces address range on Exynos7

Dmitry Baryshkov <[email protected]>
drm/msm/dpu: make dpu_hw_ctl_clear_all_blendstages clear necessary LMs

David Heidelberg <[email protected]>
drm/msm/mdp4: move HW revision detection to earlier phase

David Heidelberg <[email protected]>
drm/msm/mdp4: refactor HW revision detection into read_mdp_hw_revision

Jose Blanquicet <[email protected]>
selftests/bpf: Fix bpf-iter-tcp4 test to print correctly the dest IP

Lukasz Luba <[email protected]>
PM: EM: Increase energy calculation precision

Colin Ian King <[email protected]>
Bluetooth: increase BTNAMSIZ to 21 chars to fix potential buffer overflow

Sven Eckelmann <[email protected]>
debugfs: Return error during {full/open}_proxy_open() on rmmod

Stephan Gerhold <[email protected]>
soc: qcom: smsm: Fix missed interrupts if state changes while masked

Matthew Cover <[email protected]>
bpf, samples: Add missing mprog-disable to xdp_redirect_cpu's optstring

Rafael J. Wysocki <[email protected]>
PCI: PM: Enable PME if it can be signaled from D3cold

Rafael J. Wysocki <[email protected]>
PCI: PM: Avoid forcing PCI_D0 for wakeup reasons inconsistently

Colin Ian King <[email protected]>
media: venus: venc: Fix potential null pointer dereference on pointer fmt

Dongliang Mu <[email protected]>
media: em28xx-input: fix refcount bug in em28xx_usb_disconnect

Hans de Goede <[email protected]>
leds: trigger: audio: Add an activate callback to ensure the initial brightness is set

Andy Shevchenko <[email protected]>

    leds: lt3593: Put fwnode in any case during ->probe()

Sergey Shtylyov <[email protected]>
i2c: highlander: add IRQ check

Jiapeng Chong <[email protected]>
net/mlx5: Fix missing return value in mlx5_devlink_eswitch_inline_mode_set()

Leon Romanovsky <[email protected]>
devlink: Break parameter notification sequence to be before/after unload/load driver

Biju Das <[email protected]>
arm64: dts: renesas: hihope-rzg2-ex: Add EtherAVB internal rx delay

Geert Uytterhoeven <[email protected]>
arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling

Tedd Ho-Jeong An <[email protected]>
Bluetooth: mgmt: Fix wrong opcode in the response for add_adv cmd

Pavel Skripkin <[email protected]>
net: cipso: fix warnings in netlbl_cipsov4_add_std

Marek Vasut <[email protected]>
drm: mxsfb: Clear FIFO_CLEAR bit

Marek Vasut <[email protected]>
drm: mxsfb: Increase number of outstanding requests on V4 and newer HW

Marek Vasut <[email protected]>
drm: mxsfb: Enable recovery on underflow

Waiman Long <[email protected]>
cgroup/cpuset: Fix a partition bug with hotplug

Maxim Mikityanskiy <[email protected]>
net/mlx5e: Block LRO if firmware asks for tunneled LRO

Maxim Mikityanskiy <[email protected]>
net/mlx5e: Prohibit inner indir TIRs in IPoIB

Anand Moon <[email protected]>
ARM: dts: meson8b: ec100: Fix the pwm regulator supply properties

Anand Moon <[email protected]>
ARM: dts: meson8b: mxq: Fix the pwm regulator supply properties

Anand Moon <[email protected]>
ARM: dts: meson8b: odroidc1: Fix the pwm regulator supply properties

Martin Blumenstingl <[email protected]>
ARM: dts: meson8: Use a higher default GPU clock frequency

Martin KaFai Lau <[email protected]>
tcp: seq_file: Avoid skipping sk during tcp_seek_last_pos

Kai-Heng Feng <[email protected]>
drm/amdgpu/acp: Make PM domain really work

Colin Ian King <[email protected]>
6lowpan: iphc: Fix an off-by-one check of array index

Dan Carpenter <[email protected]>
Bluetooth: sco: prevent information leak in sco_conn_defer_accept()

Yizhuo <[email protected]>
media: atomisp: fix the uninitialized use and rename "retvalue"

Philipp Zabel <[email protected]>
media: coda: fix frame_mem_ctrl for YUV420 and YVU420 formats

Dan Carpenter <[email protected]>
media: rockchip/rga: fix error handling in probe

Mauro Carvalho Chehab <[email protected]>
media: rockchip/rga: use pm_runtime_resume_and_get()

Pavel Skripkin <[email protected]>
media: go7007: remove redundant initialization

Pavel Skripkin <[email protected]>
media: go7007: fix memory leak in go7007_usb_probe

Dongliang Mu <[email protected]>
media: dvb-usb: Fix error handling in dvb_usb_i2c_init

Dongliang Mu <[email protected]>
media: dvb-usb: fix uninit-value in vp702x_read_mac_addr

Dongliang Mu <[email protected]>
media: dvb-usb: fix uninit-value in dvb_usb_adapter_dvb_init

Leon Romanovsky <[email protected]>
ionic: cleanly release devlink instance

Zhen Lei <[email protected]>
driver core: Fix error return code in really_probe()

Zhen Lei <[email protected]>
firmware: fix theoretical UAF race with firmware cache and resume

Colin Ian King <[email protected]>
gfs2: Fix memory leak of object lsi on error return path

Martynas Pumputis <[email protected]>
libbpf: Fix removal of inner map in bpf_object__create_map

Bjorn Andersson <[email protected]>
soc: qcom: rpmhpd: Use corner in power_off

Stefan Assmann <[email protected]>
i40e: improve locking of mac_filter_hash

Geert Uytterhoeven <[email protected]>
arm64: dts: renesas: r8a77995: draak: Remove bogus adv7511w properties

Dylan Hung <[email protected]>
ARM: dts: aspeed-g6: Fix HVI3C function-group in pinctrl dtsi

Shuyi Cheng <[email protected]>
libbpf: Fix the possible memory leak on error

Haiyue Wang <[email protected]>
gve: fix the wrong AdminQ buffer overflow check

Steven Price <[email protected]>
drm/of: free the iterator object on failure

He Fengqing <[email protected]>
bpf: Fix potential memleak and UAF in the verifier.

Kuniyuki Iwashima <[email protected]>
bpf: Fix a typo of reuseport map in bpf.h.

Julia Lawall <[email protected]>
drm/of: free the right object

Christophe JAILLET <[email protected]>
media: cxd2880-spi: Fix an error handling path

Geert Uytterhoeven <[email protected]>
soc: rockchip: ROCKCHIP_GRF should not default to y, unconditionally

Jiapeng Chong <[email protected]>
leds: is31fl32xx: Fix missing error code in is31fl32xx_parse_dt()

Krzysztof Hałasa <[email protected]>
media: TDA1997x: enable EDID support

Zhang Qilong <[email protected]>
ASoC: mediatek: mt8183: Fix Unbalanced pm_runtime_enable in mt8183_afe_pcm_dev_probe

Harshvardhan Jha <[email protected]>
drm/gma500: Fix end of loop tests for list_for_each_entry

Wei Yongjun <[email protected]>
drm/panfrost: Fix missing clk_disable_unprepare() on error in panfrost_clk_init()

Qiuxu Zhuo <[email protected]>
EDAC/i10nm: Fix NVDIMM detection

Quanyang Wang <[email protected]>
spi: spi-zynq-qspi: use wait_for_completion_timeout to make zynq_qspi_exec_mem_op not interruptible

Chunyan Zhang <[email protected]>
spi: sprd: Fix the wrong WDG_LOAD_VAL

Chen-Yu Tsai <[email protected]>
regulator: vctrl: Avoid lockdep warning in enable/disable ops

Chen-Yu Tsai <[email protected]>
regulator: vctrl: Use locked regulator_get_voltage in probe path

Eric Biggers <[email protected]>
blk-crypto: fix check for too-large dun_bytes

Matija Glavinic Pecotic <[email protected]>
spi: davinci: invoke chipselect callback

Borislav Petkov <[email protected]>
x86/mce: Defer processing of early errors

Stefan Berger <[email protected]>
tpm: ibmvtpm: Avoid error message when process gets signal while waiting

Stefan Berger <[email protected]>
certs: Trigger creation of RSA module signing key if it's not an RSA key

Giovanni Cabiddu <[email protected]>
crypto: qat - use proper type for vf_mask

Chen-Yu Tsai <[email protected]>
irqchip/gic-v3: Fix priority comparison when non-secure priorities are used

Christophe JAILLET <[email protected]>
spi: coldfire-qspi: Use clk_disable_unprepare in the remove function

Pavel Skripkin <[email protected]>
block: nbd: add sanity check for first_minor

Phong Hoang <[email protected]>
clocksource/drivers/sh_cmt: Fix wrong setting if don't request IRQ for clock source channel

Hongbo Li <[email protected]>
lib/mpi: use kcalloc in mpi_resize

Huacai Chen <[email protected]>
irqchip/loongson-pch-pic: Improve edge triggered interrupt support

Zhen Lei <[email protected]>
genirq/timings: Fix error return code in irq_timings_test_irqs()

Tony Lindgren <[email protected]>
spi: spi-pic32: Fix issue with uninitialized dma_slave_config

Tony Lindgren <[email protected]>
spi: spi-fsl-dspi: Fix issue with uninitialized dma_slave_config

Ming Lei <[email protected]>
block: return ELEVATOR_DISCARD_MERGE if possible

Geert Uytterhoeven <[email protected]>
m68k: Fix invalid RMW_INSNS on CPUs that lack CAS

Yanfei Xu <[email protected]>

    rcu: Fix stall-warning deadlock due to non-release of rcu_node ->lock

Paul E. McKenney <[email protected]>
rcu: Add lockdep_assert_irqs_disabled() to rcu_sched_clock_irq() and callees

Yanfei Xu <[email protected]>
rcu: Fix to include first blocked task in stall warning

Quentin Perret <[email protected]>
sched: Fix UCLAMP_FLAG_IDLE setting

Mika Penttilä <[email protected]>
sched/numa: Fix is_core_idle()

Pavel Skripkin <[email protected]>
m68k: emu: Fix invalid free in nfeth_cleanup()

Peter Robinson <[email protected]>
power: supply: cw2015: use dev_err_probe to allow deferred probe

Harald Freudenberger <[email protected]>
s390/ap: fix state machine hang after failure to enable irq

Peter Oberparleiter <[email protected]>
s390/debug: fix debug area life cycle

Peter Oberparleiter <[email protected]>
s390/debug: keep debug data on resize

Niklas Schnelle <[email protected]>
s390/pci: fix misleading rc in clp_set_pci_fn()

Alexander Gordeev <[email protected]>
s390/kasan: fix large PMD pages address alignment check

Stian Skjelstad <[email protected]>
udf_get_extendedattr() had no boundary checks.

Desmond Cheong Zhi Xi <[email protected]>
fcntl: fix potential deadlock for &fasync_struct.fa_lock

Giovanni Cabiddu <[email protected]>
crypto: qat - do not export adf_iov_putmsg()

Marco Chiappero <[email protected]>
crypto: qat - fix naming for init/shutdown VF to PF notifications

Marco Chiappero <[email protected]>
crypto: qat - fix reuse of completion variable

Giovanni Cabiddu <[email protected]>
crypto: qat - handle both source of interrupt in VF ISR

Giovanni Cabiddu <[email protected]>
crypto: qat - do not ignore errors from enable_vf2pf_comms()

Ben Hutchings <[email protected]>
crypto: omap - Fix inconsistent locking of device lists

Damien Le Moal <[email protected]>
libata: fix ata_host_start()

Harald Freudenberger <[email protected]>
s390/zcrypt: fix wrong offset index for APKA master key valid state

Vineeth Vijayan <[email protected]>
s390/cio: add dev_busid sysfs entry for each subchannel

Sebastian Krzyszkowiak <[email protected]>

    power: supply: max17042_battery: fix typo in MAx17042_TOFF

Dmitry Osipenko <[email protected]>
power: supply: smb347-charger: Add missing pin control activation

Amit Engel <[email protected]>
nvmet: pass back cntlid on successful completion

Ruozhu Li <[email protected]>
nvme-rdma: don't update queue count when failing to set io queues

Ruozhu Li <[email protected]>
nvme-tcp: don't update queue count when failing to set io queues

Chunguang Xu <[email protected]>
blk-throtl: optimize IOPS throttle for large IO scenarios

Christoph Hellwig <[email protected]>
bcache: add proper error unwinding in bcache_device_init

Pali Rohár <[email protected]>
isofs: joliet: Fix iocharset=utf8 mount option

Pali Rohár <[email protected]>
udf: Fix iocharset=utf8 mount option

Jan Kara <[email protected]>
udf: Check LVID earlier

Thomas Gleixner <[email protected]>
hrtimer: Ensure timerfd notification for HIGHRES=n

Thomas Gleixner <[email protected]>
hrtimer: Avoid double reprogramming in __hrtimer_start_range_ns()

Frederic Weisbecker <[email protected]>
posix-cpu-timers: Force next expiration recalc after itimer reset

Smita Koralahalli <[email protected]>
EDAC/mce_amd: Do not load edac_mce_amd module on guests

Sergey Senozhatsky <[email protected]>
rcu/tree: Handle VM stoppage in stall detection

Dietmar Eggemann <[email protected]>
sched/deadline: Fix missing clock update in migrate_task_rq_dl()

Tony Lindgren <[email protected]>
crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop()

Hans de Goede <[email protected]>
power: supply: axp288_fuel_gauge: Report register-address on readb / writeb errors

Quentin Perret <[email protected]>
sched/deadline: Fix reset_on_fork reporting of DL tasks

Sean Anderson <[email protected]>
crypto: mxs-dcp - Check for DMA mapping errors

Dmitry Osipenko <[email protected]>
regulator: tps65910: Silence deferred probe error

Jeongtae Park <[email protected]>
regmap: fix the offset of register error log

Peter Zijlstra <[email protected]>
locking/mutex: Fix HANDOFF condition

-------------

Diffstat:

 Documentation/fault-injection/provoke-crashes.rst  |   2 +-
 Makefile                                           |   4 +-
 arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi           |   4 +-
 arch/arm/boot/dts/at91-sam9x60ek.dts               |  16 +-
 arch/arm/boot/dts/at91-sama5d3_xplained.dts        |  29 ++++
 arch/arm/boot/dts/at91-sama5d4_xplained.dts        |  19 +++
 arch/arm/boot/dts/meson8.dtsi                      |   5 +
 arch/arm/boot/dts/meson8b-ec100.dts                |   4 +-
 arch/arm/boot/dts/meson8b-mxq.dts                  |   4 +-
 arch/arm/boot/dts/meson8b-odroidc1.dts             |   4 +-
 arch/arm64/boot/dts/exynos/exynos7.dtsi            |   2 +-
 .../boot/dts/marvell/armada-3720-turris-mox.dts    |  17 ++
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi       |  11 +-
 .../arm64/boot/dts/renesas/beacon-renesom-som.dtsi |   3 +-
 arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi    |   3 +-
 arch/arm64/boot/dts/renesas/r8a774a1.dtsi          |   2 +
 arch/arm64/boot/dts/renesas/r8a774b1.dtsi          |   2 +
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi          |   1 +
 arch/arm64/boot/dts/renesas/r8a774e1.dtsi          |   2 +
 arch/arm64/boot/dts/renesas/r8a77995-draak.dts     |   4 -
 arch/m68k/Kconfig.cpu                              |   8 +-
 arch/m68k/emu/nfeth.c                              |   4 +-
 arch/s390/include/asm/kvm_host.h                   |   1 +
 arch/s390/kernel/debug.c                           | 176 +++++++++++++--------
 arch/s390/kvm/interrupt.c                          |  12 +-
 arch/s390/kvm/kvm-s390.c                           |   2 +-
 arch/s390/kvm/kvm-s390.h                           |   2 +-
 arch/s390/mm/kasan_init.c                          |  41 +++--
 arch/s390/pci/pci.c                                |   7 +-
 arch/s390/pci/pci_clp.c                            |  33 ++--
 arch/x86/events/amd/ibs.c                          |   1 +
 arch/x86/include/asm/mce.h                         |   1 +
 arch/x86/kernel/cpu/mce/core.c                     |  11 +-
 arch/x86/kernel/cpu/resctrl/monitor.c              |   6 +
 arch/x86/kvm/mmu/mmu.c                             |   6 -
 arch/x86/kvm/vmx/nested.c                          |   7 +-
 arch/x86/kvm/vmx/vmx.c                             |   3 +
 arch/x86/kvm/x86.c                                 |   4 +
 block/bfq-iosched.c                                |   3 +
 block/bio.c                                        |  15 +-
 block/blk-crypto.c                                 |   2 +-
 block/blk-merge.c                                  |  18 +--
 block/blk-throttle.c                               |  32 ++++
 block/blk.h                                        |   2 +
 block/elevator.c                                   |   3 +
 block/mq-deadline.c                                |   2 +
 certs/Makefile                                     |   8 +
 drivers/ata/libata-core.c                          |   2 +-
 drivers/base/dd.c                                  |  16 +-
 drivers/base/firmware_loader/main.c                |  20 +--
 drivers/base/regmap/regmap.c                       |   2 +-
 drivers/bcma/main.c                                |   6 +-
 drivers/block/nbd.c                                |  10 ++
 drivers/char/tpm/tpm_ibmvtpm.c                     |  26 +--
 drivers/char/tpm/tpm_ibmvtpm.h                     |   2 +-
 drivers/clk/mvebu/kirkwood.c                       |   1 +
 drivers/clocksource/sh_cmt.c                       |  30 ++--
 drivers/counter/104-quad-8.c                       |   5 +-
 drivers/crypto/mxs-dcp.c                           |  45 ++++--
 drivers/crypto/omap-aes.c                          |   8 +-
 drivers/crypto/omap-des.c                          |   8 +-
 drivers/crypto/omap-sham.c                         |  14 +-
 .../crypto/qat/qat_c3xxxvf/adf_c3xxxvf_hw_data.c   |   4 +-
 drivers/crypto/qat/qat_c62xvf/adf_c62xvf_hw_data.c |   4 +-
 drivers/crypto/qat/qat_common/adf_common_drv.h     |   8 +-
 drivers/crypto/qat/qat_common/adf_init.c           |   5 +-
 drivers/crypto/qat/qat_common/adf_isr.c            |   7 +-
 drivers/crypto/qat/qat_common/adf_pf2vf_msg.c      |   3 +-
 drivers/crypto/qat/qat_common/adf_vf2pf_msg.c      |  12 +-
 drivers/crypto/qat/qat_common/adf_vf_isr.c         |   7 +-
 .../qat/qat_dh895xccvf/adf_dh895xccvf_hw_data.c    |   4 +-
 drivers/edac/i10nm_base.c                          |   6 +-
 drivers/edac/mce_amd.c                             |   3 +
 drivers/firmware/raspberrypi.c                     |  46 +++++-
 drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c            |  54 +++----
 drivers/gpu/drm/drm_of.c                           |   6 +-
 drivers/gpu/drm/gma500/oaktrail_lvds.c             |   2 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c         |  10 +-
 drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c           |  68 ++++----
 drivers/gpu/drm/msm/dsi/dsi.c                      |   6 +-
 drivers/gpu/drm/mxsfb/mxsfb_drv.c                  |   3 +
 drivers/gpu/drm/mxsfb/mxsfb_drv.h                  |   1 +
 drivers/gpu/drm/mxsfb/mxsfb_kms.c                  |  40 +++++
 drivers/gpu/drm/mxsfb/mxsfb_regs.h                 |   9 ++
 drivers/gpu/drm/panfrost/panfrost_device.c         |   3 +-
 drivers/i2c/busses/i2c-highlander.c                |   2 +-
 drivers/i2c/busses/i2c-hix5hd2.c                   |   4 +-
 drivers/i2c/busses/i2c-iop3xx.c                    |   6 +-
 drivers/i2c/busses/i2c-mt65xx.c                    |   2 +-
 drivers/i2c/busses/i2c-s3c2410.c                   |   2 +-
 drivers/i2c/busses/i2c-synquacer.c                 |   2 +-
 drivers/i2c/busses/i2c-xlp9xx.c                    |   2 +-
 drivers/irqchip/irq-gic-v3.c                       |  23 ++-
 drivers/irqchip/irq-loongson-pch-pic.c             |  19 ++-
 drivers/leds/leds-is31fl32xx.c                     |   1 +
 drivers/leds/leds-lt3593.c                         |   5 +-
 drivers/leds/trigger/ledtrig-audio.c               |  37 ++++-
 drivers/md/bcache/super.c                          |  16 +-
 drivers/media/i2c/tda1997x.c                       |   1 +
 drivers/media/platform/coda/coda-bit.c             |  18 ++-
 drivers/media/platform/qcom/venus/venc.c           |   2 +
 drivers/media/platform/rockchip/rga/rga-buf.c      |   3 +-
 drivers/media/platform/rockchip/rga/rga.c          |  29 +++-
 drivers/media/spi/cxd2880-spi.c                    |   7 +-
 drivers/media/usb/dvb-usb/dvb-usb-i2c.c            |   9 +-
 drivers/media/usb/dvb-usb/dvb-usb-init.c           |   2 +-
 drivers/media/usb/dvb-usb/nova-t-usb2.c            |   6 +-
 drivers/media/usb/dvb-usb/vp702x.c                 |  12 +-
 drivers/media/usb/em28xx/em28xx-input.c            |   1 -
 drivers/media/usb/go7007/go7007-driver.c           |  26 ---
 drivers/media/usb/go7007/go7007-usb.c              |   2 +-
 drivers/misc/lkdtm/core.c                          |   2 +-
 drivers/mmc/host/dw_mmc.c                          |   1 +
 drivers/mmc/host/moxart-mmc.c                      |   1 +
 drivers/mmc/host/sdhci.c                           |   1 +
 .../net/ethernet/aquantia/atlantic/aq_pci_func.c   |   3 +
 drivers/net/ethernet/google/gve/gve_adminq.c       |   6 +-
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c |  23 ++-
 drivers/net/ethernet/intel/ice/ice_main.c          |  13 +-
 .../net/ethernet/marvell/octeontx2/af/rvu_npc.c    |  16 +-
 drivers/net/ethernet/mellanox/mlx5/core/devlink.c  |  52 ++++++
 drivers/net/ethernet/mellanox/mlx5/core/en/fs.h    |   6 -
 drivers/net/ethernet/mellanox/mlx5/core/en_fs.c    |  10 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c  |  15 ++
 .../ethernet/mellanox/mlx5/core/eswitch_offloads.c |   5 +-
 .../net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c  |  18 +--
 .../net/ethernet/pensando/ionic/ionic_devlink.c    |  14 +-
 drivers/net/ethernet/qualcomm/qca_spi.c            |   2 +-
 drivers/net/ethernet/qualcomm/qca_uart.c           |   2 +-
 drivers/net/wireless/ath/ath6kl/wmi.c              |   4 +-
 .../wireless/broadcom/brcm80211/brcmfmac/pcie.c    |   2 +-
 drivers/net/wireless/intel/iwlwifi/fw/acpi.c       |  32 ++--
 drivers/net/wireless/intel/iwlwifi/fw/acpi.h       |  10 +-
 .../net/wireless/intel/iwlwifi/fw/api/commands.h   |   2 +-
 .../net/wireless/intel/iwlwifi/fw/api/nvm-reg.h    |   8 +-
 drivers/net/wireless/intel/iwlwifi/fw/api/scan.h   |  12 +-
 drivers/net/wireless/intel/iwlwifi/fw/file.h       |   2 +-
 drivers/net/wireless/intel/iwlwifi/iwl-config.h    |   2 +-
 drivers/net/wireless/intel/iwlwifi/mvm/fw.c        |   6 +-
 drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c  |  10 +-
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c  |  13 +-
 drivers/net/wireless/intel/iwlwifi/mvm/scan.c      |  24 +--
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c      |   1 +
 drivers/net/wireless/rsi/rsi_91x_hal.c             |   4 +-
 drivers/net/wireless/rsi/rsi_91x_usb.c             |   1 +
 drivers/nvme/host/rdma.c                           |   4 +-
 drivers/nvme/host/tcp.c                            |   4 +-
 drivers/nvme/target/fabrics-cmd.c                  |   9 +-
 drivers/pci/pci.c                                  |  25 ++-
 drivers/power/supply/axp288_fuel_gauge.c           |   4 +-
 drivers/power/supply/cw2015_battery.c              |   4 +-
 drivers/power/supply/max17042_battery.c            |   2 +-
 drivers/power/supply/smb347-charger.c              |  10 ++
 drivers/regulator/tps65910-regulator.c             |  10 +-
 drivers/regulator/vctrl-regulator.c                |  73 +++++----
 drivers/s390/cio/css.c                             |  17 ++
 drivers/s390/crypto/ap_bus.c                       |  25 +--
 drivers/s390/crypto/ap_bus.h                       |  10 +-
 drivers/s390/crypto/ap_queue.c                     |  20 +--
 drivers/s390/crypto/zcrypt_ccamisc.c               |   8 +-
 drivers/soc/qcom/rpmhpd.c                          |   5 +-
 drivers/soc/qcom/smsm.c                            |  11 +-
 drivers/soc/rockchip/Kconfig                       |   4 +-
 drivers/spi/spi-coldfire-qspi.c                    |   2 +-
 drivers/spi/spi-davinci.c                          |   8 +-
 drivers/spi/spi-fsl-dspi.c                         |   1 +
 drivers/spi/spi-pic32.c                            |   1 +
 drivers/spi/spi-sprd-adi.c                         |   2 +-
 drivers/spi/spi-zynq-qspi.c                        |   8 +-
 drivers/staging/clocking-wizard/Kconfig            |   2 +-
 .../staging/media/atomisp/i2c/atomisp-mt9m114.c    |  11 +-
 drivers/tty/serial/fsl_lpuart.c                    |   2 +-
 drivers/tty/tty_io.c                               |   4 +-
 drivers/usb/dwc3/dwc3-meson-g12a.c                 |   2 +
 drivers/usb/dwc3/dwc3-qcom.c                       |   4 +
 drivers/usb/gadget/udc/at91_udc.c                  |   4 +-
 drivers/usb/gadget/udc/bdc/bdc_core.c              |  30 ++--
 drivers/usb/gadget/udc/mv_u3d_core.c               |  19 +--
 drivers/usb/gadget/udc/renesas_usb3.c              |  17 +-
 drivers/usb/gadget/udc/s3c2410_udc.c               |   4 +
 drivers/usb/host/ehci-orion.c                      |   8 +-
 drivers/usb/host/ohci-tmio.c                       |   3 +
 drivers/usb/phy/phy-fsl-usb.c                      |   2 +
 drivers/usb/phy/phy-tahvo.c                        |   4 +-
 drivers/usb/phy/phy-twl6030-usb.c                  |   5 +
 drivers/video/backlight/pwm_bl.c                   |  54 ++++---
 drivers/video/fbdev/core/fbmem.c                   |   6 +
 fs/cifs/cifs_unicode.c                             |   9 +-
 fs/debugfs/file.c                                  |   8 +-
 fs/f2fs/file.c                                     |   5 +-
 fs/f2fs/super.c                                    |  11 +-
 fs/fcntl.c                                         |   5 +-
 fs/fuse/file.c                                     |   9 +-
 fs/gfs2/ops_fstype.c                               |  43 +++++
 fs/gfs2/super.c                                    |  61 +------
 fs/io_uring.c                                      |   1 +
 fs/iomap/swapfile.c                                |   6 +
 fs/isofs/inode.c                                   |  27 ++--
 fs/isofs/isofs.h                                   |   1 -
 fs/isofs/joliet.c                                  |   4 +-
 fs/lockd/svclock.c                                 |   2 +-
 fs/nfsd/nfs4state.c                                |   4 +-
 fs/udf/misc.c                                      |  13 +-
 fs/udf/super.c                                     |  75 ++++-----
 fs/udf/udf_sb.h                                    |   2 -
 fs/udf/unicode.c                                   |   4 +-
 include/linux/blkdev.h                             |  16 ++
 include/linux/energy_model.h                       |  16 ++
 include/linux/hrtimer.h                            |   5 -
 include/linux/local_lock_internal.h                |  39 +++--
 include/linux/lockdep.h                            |  15 +-
 include/linux/lockdep_types.h                      |  18 ++-
 include/linux/mlx5/mlx5_ifc.h                      |   3 +-
 include/linux/power/max17042_battery.h             |   2 +-
 include/linux/time64.h                             |   9 +-
 include/soc/bcm2835/raspberrypi-firmware.h         |   2 +
 include/uapi/linux/bpf.h                           |   2 +-
 kernel/bpf/verifier.c                              |  31 ++--
 kernel/cgroup/cpuset.c                             |  95 ++++++-----
 kernel/cpu_pm.c                                    |  50 ++++--
 kernel/irq/timings.c                               |   2 +
 kernel/locking/lockdep.c                           |  16 +-
 kernel/locking/mutex.c                             |  15 +-
 kernel/power/energy_model.c                        |   4 +-
 kernel/rcu/tree.c                                  |   4 +
 kernel/rcu/tree_plugin.h                           |   1 +
 kernel/rcu/tree_stall.h                            |  34 +++-
 kernel/sched/core.c                                |  25 ++-
 kernel/sched/deadline.c                            |   8 +-
 kernel/sched/fair.c                                |   2 +-
 kernel/sched/sched.h                               |   2 +
 kernel/time/hrtimer.c                              |  92 ++++++++---
 kernel/time/posix-cpu-timers.c                     |   2 -
 kernel/time/tick-internal.h                        |   3 +
 lib/mpi/mpiutil.c                                  |   2 +-
 net/6lowpan/debugfs.c                              |   3 +-
 net/bluetooth/cmtp/cmtp.h                          |   2 +-
 net/bluetooth/hci_core.c                           |  14 ++
 net/bluetooth/mgmt.c                               |   2 +-
 net/bluetooth/sco.c                                |  11 +-
 net/core/devlink.c                                 |  36 +++--
 net/ipv4/route.c                                   |  48 ++++--
 net/ipv4/tcp_ipv4.c                                |   5 +-
 net/ipv6/route.c                                   |   5 +-
 net/mac80211/tx.c                                  |   4 +-
 net/netlabel/netlabel_cipso_v4.c                   |   8 +-
 net/sched/sch_cbq.c                                |   2 +-
 samples/bpf/xdp_redirect_cpu_user.c                |   2 +-
 samples/pktgen/pktgen_sample04_many_flows.sh       |  12 +-
 samples/pktgen/pktgen_sample05_flow_per_thread.sh  |  12 +-
 security/integrity/ima/Kconfig                     |   1 -
 security/integrity/ima/ima_mok.c                   |   2 +-
 sound/soc/codecs/rt5682-i2c.c                      |  20 +++
 sound/soc/codecs/wcd9335.c                         |  23 ++-
 sound/soc/intel/boards/kbl_da7219_max98927.c       |  55 +------
 sound/soc/intel/common/soc-acpi-intel-cml-match.c  |   2 +-
 sound/soc/intel/common/soc-acpi-intel-kbl-match.c  |   2 +-
 sound/soc/intel/skylake/skl-topology.c             |  25 ++-
 sound/soc/mediatek/mt8183/mt8183-afe-pcm.c         |  43 +++--
 tools/include/uapi/linux/bpf.h                     |   2 +-
 tools/lib/bpf/Makefile                             |  10 +-
 tools/lib/bpf/libbpf.c                             |  16 +-
 tools/testing/selftests/bpf/progs/bpf_iter_tcp4.c  |   2 +-
 .../selftests/bpf/progs/test_core_autosize.c       |  20 ++-
 264 files changed, 2074 insertions(+), 1184 deletions(-)
author maintainer
#9 lore raw

PATCH 9/236 rcu/tree: Handle VM stoppage in stall detection

From: Sergey Senozhatsky <[email protected]>

[ Upstream commit ccfc9dd6914feaa9a81f10f9cce56eb0f7712264 ]

The soft watchdog timer function checks if a virtual machine was suspended and hence what looks like a lockup in fact is a false positive.

This is what kvm_check_and_clear_guest_paused() does: it tests guest PVCLOCK_GUEST_STOPPED (which is set by the host) and if it's set then we need to touch all watchdogs and bail out.

Watchdog timer function runs from IRQ, so PVCLOCK_GUEST_STOPPED check works fine.

There is, however, one more watchdog that runs from IRQ, so watchdog timer fn races with it, and that watchdog is not aware of PVCLOCK_GUEST_STOPPED - RCU stall detector.

apic_timer_interrupt()
smp_apic_timer_interrupt()
hrtimer_interrupt()
__hrtimer_run_queues()
tick_sched_timer()
tick_sched_handle()
update_process_times()
rcu_sched_clock_irq()

This triggers RCU stalls on our devices during VM resume.

If tick_sched_handle()->rcu_sched_clock_irq() runs on a VCPU before watchdog_timer_fn()->kvm_check_and_clear_guest_paused() then there is nothing on this VCPU that touches watchdogs and RCU reads stale gp stall timestamp and new jiffies value, which makes it think that RCU has stalled.

Make RCU stall watchdog aware of PVCLOCK_GUEST_STOPPED and don't report RCU stalls when we resume the VM.

---
 kernel/rcu/tree_stall.h | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
kernel/rcu/tree_stall.h +18 -0
index ca21d28a0f98..0435e5e716a8 100644
@@ -7,6 +7,8 @@
  * Author: Paul E. McKenney <[email protected]>
  */
 
+#include <linux/kvm_para.h>
+
 //////////////////////////////////////////////////////////////////////////////
 //
 // Controlling CPU stall warnings, including delay calculation.
@@ -633,6 +635,14 @@ static void check_cpu_stall(struct rcu_data *rdp)
 	    (READ_ONCE(rnp->qsmask) & rdp->grpmask) &&
 	    cmpxchg(&rcu_state.jiffies_stall, js, jn) == js) {
 
+		/*
+		 * If a virtual machine is stopped by the host it can look to
+		 * the watchdog like an RCU stall. Check to see if the host
+		 * stopped the vm.
+		 */
+		if (kvm_check_and_clear_guest_paused())
+			return;
+
 		/* We haven't checked in, so go dump stack. */
 		print_cpu_stall(gps);
 		if (READ_ONCE(rcu_cpu_stall_ftrace_dump))
@@ -642,6 +652,14 @@ static void check_cpu_stall(struct rcu_data *rdp)
 		   ULONG_CMP_GE(j, js + RCU_STALL_RAT_DELAY) &&
 		   cmpxchg(&rcu_state.jiffies_stall, js, jn) == js) {
 
+		/*
+		 * If a virtual machine is stopped by the host it can look to
+		 * the watchdog like an RCU stall. Check to see if the host
+		 * stopped the vm.
+		 */
+		if (kvm_check_and_clear_guest_paused())
+			return;
+
 		/* They had a few time units to dump stack, so complain. */
 		print_other_cpu_stall(gs2, gps);
 		if (READ_ONCE(rcu_cpu_stall_ftrace_dump))
Signature · 1 line
2.30.2
author maintainer
#3 lore raw

PATCH 3/236 regulator: tps65910: Silence deferred probe error

In reply to Greg Kroah-Hartman

From: Dmitry Osipenko <[email protected]>

[ Upstream commit e301df76472cc929fa62d923bc3892931f7ad71d ]

The TPS65910 regulator now gets a deferred probe until supply regulator is registered. Silence noisy error message about the deferred probe.

---
 drivers/regulator/tps65910-regulator.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
drivers/regulator/tps65910-regulator.c +4 -6
index 1d5b0a1b86f7..06cbe60c990f 100644
@@ -1211,12 +1211,10 @@ static int tps65910_probe(struct platform_device *pdev)
 
 		rdev = devm_regulator_register(&pdev->dev, &pmic->desc[i],
 					       &config);
-		if (IS_ERR(rdev)) {
-			dev_err(tps65910->dev,
-				"failed to register %s regulator\n",
-				pdev->name);
-			return PTR_ERR(rdev);
-		}
+		if (IS_ERR(rdev))
+			return dev_err_probe(tps65910->dev, PTR_ERR(rdev),
+					     "failed to register %s regulator\n",
+					     pdev->name);
 
 		/* Save regulator for cleanup */
 		pmic->rdev[i] = rdev;
Signature · 1 line
2.30.2
author maintainer
#25 lore raw

PATCH 25/236 s390/zcrypt: fix wrong offset index for APKA master key valid state

In reply to Greg Kroah-Hartman

From: Harald Freudenberger <[email protected]>

[ Upstream commit 8617bb74006252cb2286008afe7d6575a6425857 ]

Tests showed a mismatch between what the CCA tool reports about the APKA master key state and what's displayed by the zcrypt dd in sysfs. After some investigation, we found out that the documentation which was the source for the zcrypt dd implementation lacks the listing of 3 fields. So this patch now moves the evaluation of the APKA master key state to the correct offset.

---
 drivers/s390/crypto/zcrypt_ccamisc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/s390/crypto/zcrypt_ccamisc.c +4 -4
index b1046811450f..ffab935ddd95 100644
@@ -1715,10 +1715,10 @@ static int fetch_cca_info(u16 cardnr, u16 domain, struct cca_info *ci)
 	rlen = vlen = PAGE_SIZE/2;
 	rc = cca_query_crypto_facility(cardnr, domain, "STATICSB",
 				       rarray, &rlen, varray, &vlen);
-	if (rc == 0 && rlen >= 10*8 && vlen >= 240) {
-		ci->new_apka_mk_state = (char) rarray[7*8];
-		ci->cur_apka_mk_state = (char) rarray[8*8];
-		ci->old_apka_mk_state = (char) rarray[9*8];
+	if (rc == 0 && rlen >= 13*8 && vlen >= 240) {
+		ci->new_apka_mk_state = (char) rarray[10*8];
+		ci->cur_apka_mk_state = (char) rarray[11*8];
+		ci->old_apka_mk_state = (char) rarray[12*8];
 		if (ci->old_apka_mk_state == '2')
 			memcpy(&ci->old_apka_mkvp, varray + 208, 8);
 		if (ci->cur_apka_mk_state == '2')
Signature · 1 line
2.30.2
author maintainer
#24 lore raw

PATCH 24/236 s390/cio: add dev_busid sysfs entry for each subchannel

In reply to Greg Kroah-Hartman

From: Vineeth Vijayan <[email protected]>

[ Upstream commit d3683c055212bf910d4e318f7944910ce10dbee6 ]

Introduce dev_busid, which exports the device-id associated with the io-subchannel (and message-subchannel). The dev_busid indicates that of the device which may be physically installed on the corrosponding subchannel. The dev_busid value "none" indicates that the subchannel is not valid, there is no I/O device currently associated with the subchannel.

The dev_busid information would be helpful to write device-specific udev-rules associated with the subchannel. The dev_busid interface would be available even when the sch is not bound to any driver or if there is no operational device connected on it. Hence this attribute can be used to write udev-rules which are specific to the device associated with the subchannel.

---
 drivers/s390/cio/css.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
drivers/s390/cio/css.c +17 -0
index cca1a7c4bb33..305db4173dcf 100644
@@ -426,9 +426,26 @@ static ssize_t pimpampom_show(struct device *dev,
 }
 static DEVICE_ATTR_RO(pimpampom);
 
+static ssize_t dev_busid_show(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	struct subchannel *sch = to_subchannel(dev);
+	struct pmcw *pmcw = &sch->schib.pmcw;
+
+	if ((pmcw->st == SUBCHANNEL_TYPE_IO ||
+	     pmcw->st == SUBCHANNEL_TYPE_MSG) && pmcw->dnv)
+		return sysfs_emit(buf, "0.%x.%04x\n", sch->schid.ssid,
+				  pmcw->dev);
+	else
+		return sysfs_emit(buf, "none\n");
+}
+static DEVICE_ATTR_RO(dev_busid);
+
 static struct attribute *io_subchannel_type_attrs[] = {
 	&dev_attr_chpids.attr,
 	&dev_attr_pimpampom.attr,
+	&dev_attr_dev_busid.attr,
 	NULL,
 };
 ATTRIBUTE_GROUPS(io_subchannel_type);
Signature · 1 line
2.30.2
author maintainer
#71 lore raw

PATCH 71/236 ASoC: mediatek: mt8183: Fix Unbalanced pm_runtime_enable in mt8183_afe_pcm_dev_probe

In reply to Greg Kroah-Hartman

From: Zhang Qilong <[email protected]>

[ Upstream commit 19f479c37f76e926a6c0bec974a4d09826e32fc6 ]

Add missing pm_runtime_disable() when probe error out. It could avoid pm_runtime implementation complains when removing and probing again the driver.

Fixes a94aec035a122 ("ASoC: mediatek: mt8183: add platform driver")
---
 sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 43 ++++++++++++++--------
 1 file changed, 27 insertions(+), 16 deletions(-)
sound/soc/mediatek/mt8183/mt8183-afe-pcm.c +27 -16
index c4a598cbbdaa..14e77df06b01 100644
@@ -1119,25 +1119,26 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev)
 	afe->regmap = syscon_node_to_regmap(dev->parent->of_node);
 	if (IS_ERR(afe->regmap)) {
 		dev_err(dev, "could not get regmap from parent\n");
-		return PTR_ERR(afe->regmap);
+		ret = PTR_ERR(afe->regmap);
+		goto err_pm_disable;
 	}
 	ret = regmap_attach_dev(dev, afe->regmap, &mt8183_afe_regmap_config);
 	if (ret) {
 		dev_warn(dev, "regmap_attach_dev fail, ret %d\n", ret);
-		return ret;
+		goto err_pm_disable;
 	}
 
 	rstc = devm_reset_control_get(dev, "audiosys");
 	if (IS_ERR(rstc)) {
 		ret = PTR_ERR(rstc);
 		dev_err(dev, "could not get audiosys reset:%d\n", ret);
-		return ret;
+		goto err_pm_disable;
 	}
 
 	ret = reset_control_reset(rstc);
 	if (ret) {
 		dev_err(dev, "failed to trigger audio reset:%d\n", ret);
-		return ret;
+		goto err_pm_disable;
 	}
 
 	/* enable clock for regcache get default value from hw */
@@ -1147,7 +1148,7 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev)
 	ret = regmap_reinit_cache(afe->regmap, &mt8183_afe_regmap_config);
 	if (ret) {
 		dev_err(dev, "regmap_reinit_cache fail, ret %d\n", ret);
-		return ret;
+		goto err_pm_disable;
 	}
 
 	pm_runtime_put_sync(&pdev->dev);
@@ -1160,8 +1161,10 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev)
 	afe->memif_size = MT8183_MEMIF_NUM;
 	afe->memif = devm_kcalloc(dev, afe->memif_size, sizeof(*afe->memif),
 				  GFP_KERNEL);
-	if (!afe->memif)
-		return -ENOMEM;
+	if (!afe->memif) {
+		ret = -ENOMEM;
+		goto err_pm_disable;
+	}
 
 	for (i = 0; i < afe->memif_size; i++) {
 		afe->memif[i].data = &memif_data[i];
@@ -1178,22 +1181,26 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev)
 	afe->irqs_size = MT8183_IRQ_NUM;
 	afe->irqs = devm_kcalloc(dev, afe->irqs_size, sizeof(*afe->irqs),
 				 GFP_KERNEL);
-	if (!afe->irqs)
-		return -ENOMEM;
+	if (!afe->irqs) {
+		ret = -ENOMEM;
+		goto err_pm_disable;
+	}
 
 	for (i = 0; i < afe->irqs_size; i++)
 		afe->irqs[i].irq_data = &irq_data[i];
 
 	/* request irq */
 	irq_id = platform_get_irq(pdev, 0);
-	if (irq_id < 0)
-		return irq_id;
+	if (irq_id < 0) {
+		ret = irq_id;
+		goto err_pm_disable;
+	}
 
 	ret = devm_request_irq(dev, irq_id, mt8183_afe_irq_handler,
 			       IRQF_TRIGGER_NONE, "asys-isr", (void *)afe);
 	if (ret) {
 		dev_err(dev, "could not request_irq for asys-isr\n");
-		return ret;
+		goto err_pm_disable;
 	}
 
 	/* init sub_dais */
@@ -1204,7 +1211,7 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev)
 		if (ret) {
 			dev_warn(afe->dev, "dai register i %d fail, ret %d\n",
 				 i, ret);
-			return ret;
+			goto err_pm_disable;
 		}
 	}
 
@@ -1213,7 +1220,7 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_warn(afe->dev, "mtk_afe_combine_sub_dai fail, ret %d\n",
 			 ret);
-		return ret;
+		goto err_pm_disable;
 	}
 
 	afe->mtk_afe_hardware = &mt8183_afe_hardware;
@@ -1229,7 +1236,7 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev)
 					      NULL, 0);
 	if (ret) {
 		dev_warn(dev, "err_platform\n");
-		return ret;
+		goto err_pm_disable;
 	}
 
 	ret = devm_snd_soc_register_component(afe->dev,
@@ -1238,10 +1245,14 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev)
 					      afe->num_dai_drivers);
 	if (ret) {
 		dev_warn(dev, "err_dai_component\n");
-		return ret;
+		goto err_pm_disable;
 	}
 
 	return ret;
+
+err_pm_disable:
+	pm_runtime_disable(&pdev->dev);
+	return ret;
 }
 
 static int mt8183_afe_pcm_dev_remove(struct platform_device *pdev)
Signature · 1 line
2.30.2
author maintainer
#74 lore raw

PATCH 74/236 soc: rockchip: ROCKCHIP_GRF should not default to y, unconditionally

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 2a1c55d4762dd34a8b0f2e36fb01b7b16b60735b ]

Merely enabling CONFIG_COMPILE_TEST should not enable additional code. To fix this, restrict the automatic enabling of ROCKCHIP_GRF to ARCH_ROCKCHIP, and ask the user in case of compile-testing.

Fixes 4c58063d4258f6be ("soc: rockchip: add driver handling grf setup")
---
 drivers/soc/rockchip/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/soc/rockchip/Kconfig +2 -2
index 2c13bf4dd5db..25eb2c1e31bb 100644
@@ -6,8 +6,8 @@ if ARCH_ROCKCHIP || COMPILE_TEST
 #
 
 config ROCKCHIP_GRF
-	bool
-	default y
+	bool "Rockchip General Register Files support" if COMPILE_TEST
+	default y if ARCH_ROCKCHIP
 	help
 	  The General Register Files are a central component providing
 	  special additional settings registers for a lot of soc-components.
Signature · 1 line
2.30.2
author maintainer
#32 lore raw

PATCH 32/236 crypto: qat - do not export adf_iov_putmsg()

In reply to Greg Kroah-Hartman

From: Giovanni Cabiddu <[email protected]>

[ Upstream commit 645ae0af1840199086c33e4f841892ebee73f615 ]

The function adf_iov_putmsg() is only used inside the intel_qat module therefore should not be exported.
Remove EXPORT_SYMBOL for the function adf_iov_putmsg().

---
 drivers/crypto/qat/qat_common/adf_pf2vf_msg.c | 1 -
 1 file changed, 1 deletion(-)
drivers/crypto/qat/qat_common/adf_pf2vf_msg.c +0 -1
index 4c39731c51c8..e829c6aaf16f 100644
@@ -186,7 +186,6 @@ int adf_iov_putmsg(struct adf_accel_dev *accel_dev, u32 msg, u8 vf_nr)
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(adf_iov_putmsg);
 
 void adf_vf2pf_req_hndl(struct adf_accel_vf_info *vf_info)
 {
Signature · 1 line
2.30.2
author maintainer
#75 lore raw

PATCH 75/236 media: cxd2880-spi: Fix an error handling path

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit dcb0145821017e929a733e2271c85c6f82b9c9f8 ]

If an error occurs after a successful 'regulator_enable()' call, 'regulator_disable()' must be called.

Fix the error handling path of the probe accordingly.

Fixes cb496cd472af ("media: cxd2880-spi: Add optional vcc regulator")
---
 drivers/media/spi/cxd2880-spi.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/media/spi/cxd2880-spi.c +5 -2
index 4077217777f9..93194f03764d 100644
@@ -524,13 +524,13 @@ cxd2880_spi_probe(struct spi_device *spi)
 	if (IS_ERR(dvb_spi->vcc_supply)) {
 		if (PTR_ERR(dvb_spi->vcc_supply) == -EPROBE_DEFER) {
 			ret = -EPROBE_DEFER;
-			goto fail_adapter;
+			goto fail_regulator;
 		}
 		dvb_spi->vcc_supply = NULL;
 	} else {
 		ret = regulator_enable(dvb_spi->vcc_supply);
 		if (ret)
-			goto fail_adapter;
+			goto fail_regulator;
 	}
 
 	dvb_spi->spi = spi;
@@ -618,6 +618,9 @@ fail_frontend:
 fail_attach:
 	dvb_unregister_adapter(&dvb_spi->adapter);
 fail_adapter:
+	if (!dvb_spi->vcc_supply)
+		regulator_disable(dvb_spi->vcc_supply);
+fail_regulator:
 	kfree(dvb_spi);
 	return ret;
 }
Signature · 1 line
2.30.2
author maintainer
#91 lore raw

PATCH 91/236 media: dvb-usb: fix uninit-value in dvb_usb_adapter_dvb_init

In reply to Greg Kroah-Hartman

From: Dongliang Mu <[email protected]>

[ Upstream commit c5453769f77ce19a5b03f1f49946fd3f8a374009 ]

If dibusb_read_eeprom_byte fails, the mac address is not initialized. And nova_t_read_mac_address does not handle this failure, which leads to the uninit-value in dvb_usb_adapter_dvb_init.

Fix this by handling the failure of dibusb_read_eeprom_byte.

Reported-by [email protected]
Fixes 786baecfe78f ("[media] dvb-usb: move it to drivers/media/usb/dvb-usb")
---
 drivers/media/usb/dvb-usb/nova-t-usb2.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/media/usb/dvb-usb/nova-t-usb2.c +4 -2
index e7b290552b66..9c0eb0d40822 100644
@@ -130,7 +130,7 @@ ret:
 
 static int nova_t_read_mac_address (struct dvb_usb_device *d, u8 mac[6])
 {
-	int i;
+	int i, ret;
 	u8 b;
 
 	mac[0] = 0x00;
@@ -139,7 +139,9 @@ static int nova_t_read_mac_address (struct dvb_usb_device *d, u8 mac[6])
 
 	/* this is a complete guess, but works for my box */
 	for (i = 136; i < 139; i++) {
-		dibusb_read_eeprom_byte(d,i, &b);
+		ret = dibusb_read_eeprom_byte(d, i, &b);
+		if (ret)
+			return ret;
 
 		mac[5 - (i - 136)] = b;
 	}
Signature · 1 line
2.30.2
author maintainer
#92 lore raw

PATCH 92/236 media: dvb-usb: fix uninit-value in vp702x_read_mac_addr

In reply to Greg Kroah-Hartman

From: Dongliang Mu <[email protected]>

[ Upstream commit 797c061ad715a9a1480eb73f44b6939fbe3209ed ]

If vp702x_usb_in_op fails, the mac address is not initialized. And vp702x_read_mac_addr does not handle this failure, which leads to the uninit-value in dvb_usb_adapter_dvb_init.

Fix this by handling the failure of vp702x_usb_in_op.

Fixes 786baecfe78f ("[media] dvb-usb: move it to drivers/media/usb/dvb-usb")
---
 drivers/media/usb/dvb-usb/vp702x.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/media/usb/dvb-usb/vp702x.c +9 -3
index bf54747e2e01..a1d9e4801a2b 100644
@@ -291,16 +291,22 @@ static int vp702x_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 static int vp702x_read_mac_addr(struct dvb_usb_device *d,u8 mac[6])
 {
 	u8 i, *buf;
+	int ret;
 	struct vp702x_device_state *st = d->priv;
 
 	mutex_lock(&st->buf_mutex);
 	buf = st->buf;
-	for (i = 6; i < 12; i++)
-		vp702x_usb_in_op(d, READ_EEPROM_REQ, i, 1, &buf[i - 6], 1);
+	for (i = 6; i < 12; i++) {
+		ret = vp702x_usb_in_op(d, READ_EEPROM_REQ, i, 1,
+				       &buf[i - 6], 1);
+		if (ret < 0)
+			goto err;
+	}
 
 	memcpy(mac, buf, 6);
+err:
 	mutex_unlock(&st->buf_mutex);
-	return 0;
+	return ret;
 }
 
 static int vp702x_frontend_attach(struct dvb_usb_adapter *adap)
Signature · 1 line
2.30.2
author maintainer
#93 lore raw

PATCH 93/236 media: dvb-usb: Fix error handling in dvb_usb_i2c_init

In reply to Greg Kroah-Hartman

From: Dongliang Mu <[email protected]>

[ Upstream commit 131ae388b88e3daf4cb0721ed4b4cb8bfc201465 ]

In dvb_usb_i2c_init, if i2c_add_adapter fails, it only prints an error message, and then continues to set DVB_USB_STATE_I2C. This affects the logic of dvb_usb_i2c_exit, which leads to that, the deletion of i2c_adap even if the i2c_add_adapter fails.

Fix this by returning at the failure of i2c_add_adapter and then move dvb_usb_i2c_exit out of the error handling code of dvb_usb_i2c_init.

Fixes 13a79f14ab28 ("media: dvb-usb: Fix memory leak at error in dvb_usb_device_init()")
---
 drivers/media/usb/dvb-usb/dvb-usb-i2c.c  | 9 +++++++--
 drivers/media/usb/dvb-usb/dvb-usb-init.c | 2 +-
 2 files changed, 8 insertions(+), 3 deletions(-)
drivers/media/usb/dvb-usb/dvb-usb-i2c.c +7 -2
index 2e07106f4680..bc4b2abdde1a 100644
@@ -17,7 +17,8 @@ int dvb_usb_i2c_init(struct dvb_usb_device *d)
 
 	if (d->props.i2c_algo == NULL) {
 		err("no i2c algorithm specified");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err;
 	}
 
 	strscpy(d->i2c_adap.name, d->desc->name, sizeof(d->i2c_adap.name));
@@ -27,11 +28,15 @@ int dvb_usb_i2c_init(struct dvb_usb_device *d)
 
 	i2c_set_adapdata(&d->i2c_adap, d);
 
-	if ((ret = i2c_add_adapter(&d->i2c_adap)) < 0)
+	ret = i2c_add_adapter(&d->i2c_adap);
+	if (ret < 0) {
 		err("could not add i2c adapter");
+		goto err;
+	}
 
 	d->state |= DVB_USB_STATE_I2C;
 
+err:
 	return ret;
 }
 
drivers/media/usb/dvb-usb/dvb-usb-init.c +1 -1
index 28e1fd64dd3c..61439c8f33ca 100644
@@ -194,8 +194,8 @@ static int dvb_usb_init(struct dvb_usb_device *d, short *adapter_nums)
 
 err_adapter_init:
 	dvb_usb_adapter_exit(d);
-err_i2c_init:
 	dvb_usb_i2c_exit(d);
+err_i2c_init:
 	if (d->priv && d->props.priv_destroy)
 		d->props.priv_destroy(d);
 err_priv_init:
Signature · 1 line
2.30.2
author maintainer
#64 lore raw

PATCH 64/236 regulator: vctrl: Use locked regulator_get_voltage in probe path

In reply to Greg Kroah-Hartman

From: Chen-Yu Tsai <[email protected]>

[ Upstream commit 98e47570ba985f2310586c80409238200fa3170f ]

In commit e9153311491d ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage"), all calls to get/set the voltage of the control regulator were switched to unlocked versions to avoid deadlocks. However, the call in the probe path is done without regulator locks held. In this case the locked version should be used.

Switch back to the locked regulator_get_voltage() in the probe path to avoid any mishaps.

Fixes e9153311491d ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage")
---
 drivers/regulator/vctrl-regulator.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/regulator/vctrl-regulator.c +2 -1
index cbadb1c99679..93d33201ffe0 100644
@@ -490,7 +490,8 @@ static int vctrl_probe(struct platform_device *pdev)
 		if (ret)
 			return ret;
 
-		ctrl_uV = regulator_get_voltage_rdev(vctrl->ctrl_reg->rdev);
+		/* Use locked consumer API when not in regulator framework */
+		ctrl_uV = regulator_get_voltage(vctrl->ctrl_reg);
 		if (ctrl_uV < 0) {
 			dev_err(&pdev->dev, "failed to get control voltage\n");
 			return ctrl_uV;
Signature · 1 line
2.30.2
author maintainer
#94 lore raw

PATCH 94/236 media: go7007: fix memory leak in go7007_usb_probe

In reply to Greg Kroah-Hartman

From: Pavel Skripkin <[email protected]>

[ Upstream commit 47d94dad8e64b2fc1d8f66ce7acf714f9462c60f ]

In commit 137641287eb4 ("go7007: add sanity checking for endpoints") endpoint sanity check was introduced, but if check fails it simply returns with leaked pointers.

Cutted log from my local syzbot instance:

BUG: memory leak
unreferenced object 0xffff8880209f0000 (size 8192):
  comm "kworker/0:4", pid 4916, jiffies 4295263583 (age 29.310s)
  hex dump (first 32 bytes):
    30 b0 27 22 80 88 ff ff 75 73 62 2d 64 75 6d 6d  0.'"....usb-dumm
    79 5f 68 63 64 2e 33 2d 31 00 00 00 00 00 00 00  y_hcd.3-1.......
  backtrace:
    [<ffffffff860ca856>] kmalloc include/linux/slab.h:556 [inline]
    [<ffffffff860ca856>] kzalloc include/linux/slab.h:686 [inline]
    [<ffffffff860ca856>] go7007_alloc+0x46/0xb40 drivers/media/usb/go7007/go7007-driver.c:696
    [<ffffffff860de74e>] go7007_usb_probe+0x13e/0x2200 drivers/media/usb/go7007/go7007-usb.c:1114
    [<ffffffff854a5f74>] usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396
    [<ffffffff845a7151>] really_probe+0x291/0xf60 drivers/base/dd.c:576

BUG: memory leak
unreferenced object 0xffff88801e2f2800 (size 512):
  comm "kworker/0:4", pid 4916, jiffies 4295263583 (age 29.310s)
  hex dump (first 32 bytes):
    00 87 40 8a ff ff ff ff 00 00 00 00 00 00 00 00  ..@.............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff860de794>] kmalloc include/linux/slab.h:556 [inline]
    [<ffffffff860de794>] kzalloc include/linux/slab.h:686 [inline]
    [<ffffffff860de794>] go7007_usb_probe+0x184/0x2200 drivers/media/usb/go7007/go7007-usb.c:1118
    [<ffffffff854a5f74>] usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396
    [<ffffffff845a7151>] really_probe+0x291/0xf60 drivers/base/dd.c:576
Fixes 137641287eb4 ("go7007: add sanity checking for endpoints")
---
 drivers/media/usb/go7007/go7007-usb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/usb/go7007/go7007-usb.c +1 -1
index dbf0455d5d50..eeb85981e02b 100644
@@ -1134,7 +1134,7 @@ static int go7007_usb_probe(struct usb_interface *intf,
 
 	ep = usb->usbdev->ep_in[4];
 	if (!ep)
-		return -ENODEV;
+		goto allocfail;
 
 	/* Allocate the URB and buffer for receiving incoming interrupts */
 	usb->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
Signature · 1 line
2.30.2
author maintainer
#90 lore raw

PATCH 90/236 ionic: cleanly release devlink instance

In reply to Greg Kroah-Hartman

From: Leon Romanovsky <[email protected]>

[ Upstream commit c2255ff47768c94a0ebc3968f007928bb47ea43b ]

The failure to register devlink will leave the system with dangled devlink resource, which is not cleaned if devlink_port_register() fails.

In order to remove access to ".registered" field of struct devlink_port, require both devlink_register and devlink_port_register to success and check it through device pointer.

Fixes fbfb8031533c ("ionic: Add hardware init and device commands")
---
 .../net/ethernet/pensando/ionic/ionic_devlink.c    | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/net/ethernet/pensando/ionic/ionic_devlink.c +7 -7
index 51d64718ed9f..3d94064c685d 100644
@@ -91,20 +91,20 @@ int ionic_devlink_register(struct ionic *ionic)
 	attrs.flavour = DEVLINK_PORT_FLAVOUR_PHYSICAL;
 	devlink_port_attrs_set(&ionic->dl_port, &attrs);
 	err = devlink_port_register(dl, &ionic->dl_port, 0);
-	if (err)
+	if (err) {
 		dev_err(ionic->dev, "devlink_port_register failed: %d\n", err);
-	else
-		devlink_port_type_eth_set(&ionic->dl_port,
-					  ionic->lif->netdev);
+		devlink_unregister(dl);
+		return err;
+	}
 
-	return err;
+	devlink_port_type_eth_set(&ionic->dl_port, ionic->lif->netdev);
+	return 0;
 }
 
 void ionic_devlink_unregister(struct ionic *ionic)
 {
 	struct devlink *dl = priv_to_devlink(ionic);
 
-	if (ionic->dl_port.registered)
-		devlink_port_unregister(&ionic->dl_port);
+	devlink_port_unregister(&ionic->dl_port);
 	devlink_unregister(dl);
 }
Signature · 1 line
2.30.2
author maintainer
#88 lore raw

PATCH 88/236 firmware: fix theoretical UAF race with firmware cache and resume

In reply to Greg Kroah-Hartman

From: Zhen Lei <[email protected]>

[ Upstream commit 3ecc8cb7c092b2f50e21d2aaaae35b8221ee7214 ]

This race was discovered when I carefully analyzed the code to locate another firmware-related UAF issue. It can be triggered only when the firmware load operation is executed during suspend. This possibility is almost impossible because there are few firmware load and suspend actions in the actual environment.

		CPU0			CPU1
__device_uncache_fw_images():		assign_fw():
					fw_cache_piggyback_on_request()
					<----- P0
	spin_lock(&fwc->name_lock);
	...
	list_del(&fce->list);
	spin_unlock(&fwc->name_lock);

	uncache_firmware(fce->name);
					<----- P1
					kref_get(&fw_priv->ref);

If CPU1 is interrupted at position P0, the new 'fce' has been added to the list fwc->fw_names by the fw_cache_piggyback_on_request(). In this case, CPU0 executes __device_uncache_fw_images() and will be able to see it when it traverses list fwc->fw_names. Before CPU1 executes kref_get() at P1, if CPU0 further executes uncache_firmware(), the count of fw_priv->ref may decrease to 0, causing fw_priv to be released in advance.

Move kref_get() to the lock protection range of fwc->name_lock to fix it.

Fixes ac39b3ea73aa ("firmware loader: let caching firmware piggyback on loading firmware")
---
 drivers/base/firmware_loader/main.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)
drivers/base/firmware_loader/main.c +8 -12
index a529235e6bfe..f41e4e4993d3 100644
@@ -164,7 +164,7 @@ static inline int fw_state_wait(struct fw_priv *fw_priv)
 	return __fw_state_wait_common(fw_priv, MAX_SCHEDULE_TIMEOUT);
 }
 
-static int fw_cache_piggyback_on_request(const char *name);
+static void fw_cache_piggyback_on_request(struct fw_priv *fw_priv);
 
 static struct fw_priv *__allocate_fw_priv(const char *fw_name,
 					  struct firmware_cache *fwc,
@@ -705,10 +705,8 @@ int assign_fw(struct firmware *fw, struct device *device)
 	 * on request firmware.
 	 */
 	if (!(fw_priv->opt_flags & FW_OPT_NOCACHE) &&
-	    fw_priv->fwc->state == FW_LOADER_START_CACHE) {
-		if (fw_cache_piggyback_on_request(fw_priv->fw_name))
-			kref_get(&fw_priv->ref);
-	}
+	    fw_priv->fwc->state == FW_LOADER_START_CACHE)
+		fw_cache_piggyback_on_request(fw_priv);
 
 	/* pass the pages buffer to driver at the last minute */
 	fw_set_page_data(fw_priv, fw);
@@ -1257,11 +1255,11 @@ static int __fw_entry_found(const char *name)
 	return 0;
 }
 
-static int fw_cache_piggyback_on_request(const char *name)
+static void fw_cache_piggyback_on_request(struct fw_priv *fw_priv)
 {
-	struct firmware_cache *fwc = &fw_cache;
+	const char *name = fw_priv->fw_name;
+	struct firmware_cache *fwc = fw_priv->fwc;
 	struct fw_cache_entry *fce;
-	int ret = 0;
 
 	spin_lock(&fwc->name_lock);
 	if (__fw_entry_found(name))
@@ -1269,13 +1267,12 @@ static int fw_cache_piggyback_on_request(const char *name)
 
 	fce = alloc_fw_cache_entry(name);
 	if (fce) {
-		ret = 1;
 		list_add(&fce->list, &fwc->fw_names);
+		kref_get(&fw_priv->ref);
 		pr_debug("%s: fw: %s\n", __func__, name);
 	}
 found:
 	spin_unlock(&fwc->name_lock);
-	return ret;
 }
 
 static void free_fw_cache_entry(struct fw_cache_entry *fce)
@@ -1506,9 +1503,8 @@ static inline void unregister_fw_pm_ops(void)
 	unregister_pm_notifier(&fw_cache.pm_notify);
 }
 #else
-static int fw_cache_piggyback_on_request(const char *name)
+static void fw_cache_piggyback_on_request(struct fw_priv *fw_priv)
 {
-	return 0;
 }
 static inline int register_fw_pm_ops(void)
 {
Signature · 1 line
2.30.2
author maintainer
#89 lore raw

PATCH 89/236 driver core: Fix error return code in really_probe()

In reply to Greg Kroah-Hartman

From: Zhen Lei <[email protected]>

[ Upstream commit f04948dea236b000da09c466a7ec931ecd8d7867 ]

In the case of error handling, the error code returned by the subfunction should be propagated instead of 0.

Fixes 1901fb2604fb ("Driver core: fix "driver" symlink timing")
Fixes 23b6904442d0 ("driver core: add dev_groups to all drivers")
Fixes 8fd456ec0cf0 ("driver core: Add state_synced sysfs file for devices that support it")
---
 drivers/base/dd.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)
drivers/base/dd.c +10 -6
index 85bb8742f090..81ad4f867f02 100644
@@ -543,7 +543,8 @@ re_probe:
 			goto probe_failed;
 	}
 
-	if (driver_sysfs_add(dev)) {
+	ret = driver_sysfs_add(dev);
+	if (ret) {
 		pr_err("%s: driver_sysfs_add(%s) failed\n",
 		       __func__, dev_name(dev));
 		goto probe_failed;
@@ -565,15 +566,18 @@ re_probe:
 			goto probe_failed;
 	}
 
-	if (device_add_groups(dev, drv->dev_groups)) {
+	ret = device_add_groups(dev, drv->dev_groups);
+	if (ret) {
 		dev_err(dev, "device_add_groups() failed\n");
 		goto dev_groups_failed;
 	}
 
-	if (dev_has_sync_state(dev) &&
-	    device_create_file(dev, &dev_attr_state_synced)) {
-		dev_err(dev, "state_synced sysfs add failed\n");
-		goto dev_sysfs_state_synced_failed;
+	if (dev_has_sync_state(dev)) {
+		ret = device_create_file(dev, &dev_attr_state_synced);
+		if (ret) {
+			dev_err(dev, "state_synced sysfs add failed\n");
+			goto dev_sysfs_state_synced_failed;
+		}
 	}
 
 	if (test_remove) {
Signature · 1 line
2.30.2
author maintainer
#85 lore raw

PATCH 85/236 soc: qcom: rpmhpd: Use corner in power_off

In reply to Greg Kroah-Hartman

From: Bjorn Andersson <[email protected]>

[ Upstream commit d43b3a989bc8c06fd4bbb69a7500d180db2d68e8 ]

rpmhpd_aggregate_corner() takes a corner as parameter, but in rpmhpd_power_off() the code requests the level of the first corner instead.

In all (known) current cases the first corner has level 0, so this change should be a nop, but in case that there's a power domain with a non-zero lowest level this makes sure that rpmhpd_power_off() actually requests the lowest level - which is the closest to "power off" we can get.

While touching the code, also skip the unnecessary zero-initialization of "ret".

---
 drivers/soc/qcom/rpmhpd.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/soc/qcom/rpmhpd.c +2 -3
index e72426221a69..c8b584d0c8fb 100644
@@ -310,12 +310,11 @@ static int rpmhpd_power_on(struct generic_pm_domain *domain)
 static int rpmhpd_power_off(struct generic_pm_domain *domain)
 {
 	struct rpmhpd *pd = domain_to_rpmhpd(domain);
-	int ret = 0;
+	int ret;
 
 	mutex_lock(&rpmhpd_lock);
 
-	ret = rpmhpd_aggregate_corner(pd, pd->level[0]);
-
+	ret = rpmhpd_aggregate_corner(pd, 0);
 	if (!ret)
 		pd->enabled = false;
 
Signature · 1 line
2.30.2
author maintainer
#86 lore raw

PATCH 86/236 libbpf: Fix removal of inner map in bpf_object__create_map

In reply to Greg Kroah-Hartman

From: Martynas Pumputis <[email protected]>

[ Upstream commit a21ab4c59e09c2a9994a6e393b7484e3b3f78a99 ]

If creating an outer map of a BTF-defined map-in-map fails (via bpf_object__create_map()), then the previously created its inner map won't be destroyed.

Fix this by ensuring that the destroy routines are not bypassed in the case of a failure.

---
 tools/lib/bpf/libbpf.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
tools/lib/bpf/libbpf.c +4 -6
index 04cde732d686..28923b776cdc 100644
@@ -4123,6 +4123,7 @@ static int bpf_object__create_map(struct bpf_object *obj, struct bpf_map *map)
 {
 	struct bpf_create_map_attr create_attr;
 	struct bpf_map_def *def = &map->def;
+	int err = 0;
 
 	memset(&create_attr, 0, sizeof(create_attr));
 
@@ -4165,8 +4166,6 @@ static int bpf_object__create_map(struct bpf_object *obj, struct bpf_map *map)
 
 	if (bpf_map_type__is_map_in_map(def->type)) {
 		if (map->inner_map) {
-			int err;
-
 			err = bpf_object__create_map(obj, map->inner_map);
 			if (err) {
 				pr_warn("map '%s': failed to create inner map: %d\n",
@@ -4183,8 +4182,8 @@ static int bpf_object__create_map(struct bpf_object *obj, struct bpf_map *map)
 	if (map->fd < 0 && (create_attr.btf_key_type_id ||
 			    create_attr.btf_value_type_id)) {
 		char *cp, errmsg[STRERR_BUFSIZE];
-		int err = -errno;
 
+		err = -errno;
 		cp = libbpf_strerror_r(err, errmsg, sizeof(errmsg));
 		pr_warn("Error in bpf_create_map_xattr(%s):%s(%d). Retrying without BTF.\n",
 			map->name, cp, err);
@@ -4196,15 +4195,14 @@ static int bpf_object__create_map(struct bpf_object *obj, struct bpf_map *map)
 		map->fd = bpf_create_map_xattr(&create_attr);
 	}
 
-	if (map->fd < 0)
-		return -errno;
+	err = map->fd < 0 ? -errno : 0;
 
 	if (bpf_map_type__is_map_in_map(def->type) && map->inner_map) {
 		bpf_map__destroy(map->inner_map);
 		zfree(&map->inner_map);
 	}
 
-	return 0;
+	return err;
 }
 
 static int init_map_slots(struct bpf_map *map)
Signature · 1 line
2.30.2
author maintainer
#83 lore raw

PATCH 83/236 arm64: dts: renesas: r8a77995: draak: Remove bogus adv7511w properties

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 4ec82a7bb3db8c6005e715c63224c32d458917a2 ]

The "max-clock" and "min-vrefresh" properties fail to validate with commit cfe34bb7a770c5d8 ("dt-bindings: drm: bridge: adi,adv7511.txt:
convert to yaml"). Drop them, as they are parts of an out-of-tree workaround that is not needed upstream.

---
 arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 4 ----
 1 file changed, 4 deletions(-)
arch/arm64/boot/dts/renesas/r8a77995-draak.dts +0 -4
index 8f471881b7a3..2e4bb7ecd5bd 100644
@@ -277,10 +277,6 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
 
-		/* Depends on LVDS */
-		max-clock = <135000000>;
-		min-vrefresh = <50>;
-
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
Signature · 1 line
2.30.2
author maintainer
#84 lore raw

PATCH 84/236 i40e: improve locking of mac_filter_hash

In reply to Greg Kroah-Hartman

From: Stefan Assmann <[email protected]>

[ Upstream commit 8b4b06919fd66caf49fdf4fe59f9d6312cf7956d ]

i40e_config_vf_promiscuous_mode() calls i40e_getnum_vf_vsi_vlan_filters() without acquiring the mac_filter_hash_lock spinlock.

This is unsafe because mac_filter_hash may get altered in another thread while i40e_getnum_vf_vsi_vlan_filters() traverses the hashes.

Simply adding the spinlock in i40e_getnum_vf_vsi_vlan_filters() is not possible as it already gets called in i40e_get_vlan_list_sync() with the spinlock held. Therefore adding a wrapper that acquires the spinlock and call the correct function where appropriate.

Fixes 37d318d7805f ("i40e: Remove scheduling while atomic possibility")
---
 .../ethernet/intel/i40e/i40e_virtchnl_pf.c    | 23 ++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +20 -3
index e4f13a49c3df..a02167cce81e 100644
@@ -1107,12 +1107,12 @@ static int i40e_quiesce_vf_pci(struct i40e_vf *vf)
 }
 
 /**
- * i40e_getnum_vf_vsi_vlan_filters
+ * __i40e_getnum_vf_vsi_vlan_filters
  * @vsi: pointer to the vsi
  *
  * called to get the number of VLANs offloaded on this VF
  **/
-static int i40e_getnum_vf_vsi_vlan_filters(struct i40e_vsi *vsi)
+static int __i40e_getnum_vf_vsi_vlan_filters(struct i40e_vsi *vsi)
 {
 	struct i40e_mac_filter *f;
 	u16 num_vlans = 0, bkt;
@@ -1125,6 +1125,23 @@ static int i40e_getnum_vf_vsi_vlan_filters(struct i40e_vsi *vsi)
 	return num_vlans;
 }
 
+/**
+ * i40e_getnum_vf_vsi_vlan_filters
+ * @vsi: pointer to the vsi
+ *
+ * wrapper for __i40e_getnum_vf_vsi_vlan_filters() with spinlock held
+ **/
+static int i40e_getnum_vf_vsi_vlan_filters(struct i40e_vsi *vsi)
+{
+	int num_vlans;
+
+	spin_lock_bh(&vsi->mac_filter_hash_lock);
+	num_vlans = __i40e_getnum_vf_vsi_vlan_filters(vsi);
+	spin_unlock_bh(&vsi->mac_filter_hash_lock);
+
+	return num_vlans;
+}
+
 /**
  * i40e_get_vlan_list_sync
  * @vsi: pointer to the VSI
@@ -1142,7 +1159,7 @@ static void i40e_get_vlan_list_sync(struct i40e_vsi *vsi, u16 *num_vlans,
 	int bkt;
 
 	spin_lock_bh(&vsi->mac_filter_hash_lock);
-	*num_vlans = i40e_getnum_vf_vsi_vlan_filters(vsi);
+	*num_vlans = __i40e_getnum_vf_vsi_vlan_filters(vsi);
 	*vlan_list = kcalloc(*num_vlans, sizeof(**vlan_list), GFP_ATOMIC);
 	if (!(*vlan_list))
 		goto err;
Signature · 1 line
2.30.2
author maintainer
#87 lore raw

PATCH 87/236 gfs2: Fix memory leak of object lsi on error return path

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit a6579cbfd7216b071008db13360c322a6b21400b ]

In the case where IS_ERR(lsi->si_sc_inode) is true the error exit path to free_local does not kfree the allocated object lsi leading to a memory leak. Fix this by kfree'ing lst before taking the error exit path.

Addresses-Coverity: ("Resource leak")

Fixes 97fd734ba17e ("gfs2: lookup local statfs inodes prior to journal recovery")
---
 fs/gfs2/ops_fstype.c | 1 +
 1 file changed, 1 insertion(+)
fs/gfs2/ops_fstype.c +1 -0
index ae9c5c1bdc50..52c565ff047c 100644
@@ -660,6 +660,7 @@ static int init_statfs(struct gfs2_sbd *sdp)
 			error = PTR_ERR(lsi->si_sc_inode);
 			fs_err(sdp, "can't find local \"sc\" file#%u: %d\n",
 			       jd->jd_jid, error);
+			kfree(lsi);
 			goto free_local;
 		}
 		lsi->si_jid = jd->jd_jid;
Signature · 1 line
2.30.2
author maintainer
#95 lore raw

PATCH 95/236 media: go7007: remove redundant initialization

In reply to Greg Kroah-Hartman

From: Pavel Skripkin <[email protected]>

[ Upstream commit 6f5885a7750545973bf1a942d2f0f129aef0aa06 ]

In go7007_alloc() kzalloc() is used for struct go7007 allocation. It means that there is no need in zeroing any members, because kzalloc will take care of it.

Removing these reduntant initialization steps increases execution speed a lot:

Before:
+ 86.802 us | go7007_alloc();
After:
+ 29.595 us | go7007_alloc();

Fixes 866b8695d67e8 ("Staging: add the go7007 video driver")
---
 drivers/media/usb/go7007/go7007-driver.c | 26 ------------------------
 1 file changed, 26 deletions(-)
drivers/media/usb/go7007/go7007-driver.c +0 -26
index f1767be9d868..6650eab913d8 100644
@@ -691,49 +691,23 @@ struct go7007 *go7007_alloc(const struct go7007_board_info *board,
 						struct device *dev)
 {
 	struct go7007 *go;
-	int i;
 
 	go = kzalloc(sizeof(struct go7007), GFP_KERNEL);
 	if (go == NULL)
 		return NULL;
 	go->dev = dev;
 	go->board_info = board;
-	go->board_id = 0;
 	go->tuner_type = -1;
-	go->channel_number = 0;
-	go->name[0] = 0;
 	mutex_init(&go->hw_lock);
 	init_waitqueue_head(&go->frame_waitq);
 	spin_lock_init(&go->spinlock);
 	go->status = STATUS_INIT;
-	memset(&go->i2c_adapter, 0, sizeof(go->i2c_adapter));
-	go->i2c_adapter_online = 0;
-	go->interrupt_available = 0;
 	init_waitqueue_head(&go->interrupt_waitq);
-	go->input = 0;
 	go7007_update_board(go);
-	go->encoder_h_halve = 0;
-	go->encoder_v_halve = 0;
-	go->encoder_subsample = 0;
 	go->format = V4L2_PIX_FMT_MJPEG;
 	go->bitrate = 1500000;
 	go->fps_scale = 1;
-	go->pali = 0;
 	go->aspect_ratio = GO7007_RATIO_1_1;
-	go->gop_size = 0;
-	go->ipb = 0;
-	go->closed_gop = 0;
-	go->repeat_seqhead = 0;
-	go->seq_header_enable = 0;
-	go->gop_header_enable = 0;
-	go->dvd_mode = 0;
-	go->interlace_coding = 0;
-	for (i = 0; i < 4; ++i)
-		go->modet[i].enable = 0;
-	for (i = 0; i < 1624; ++i)
-		go->modet_map[i] = 0;
-	go->audio_deliver = NULL;
-	go->audio_enabled = 0;
 
 	return go;
 }
Signature · 1 line
2.30.2
author maintainer
#96 lore raw

PATCH 96/236 media: rockchip/rga: use pm_runtime_resume_and_get()

In reply to Greg Kroah-Hartman

From: Mauro Carvalho Chehab <[email protected]>

[ Upstream commit 0314339a0a49f4a128b61e5e1a0af1df6e64a186 ]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

---
 drivers/media/platform/rockchip/rga/rga-buf.c | 3 +--
 drivers/media/platform/rockchip/rga/rga.c     | 4 +++-
 2 files changed, 4 insertions(+), 3 deletions(-)
drivers/media/platform/rockchip/rga/rga-buf.c +1 -2
index bf9a75b75083..81508ed5abf3 100644
@@ -79,9 +79,8 @@ static int rga_buf_start_streaming(struct vb2_queue *q, unsigned int count)
 	struct rockchip_rga *rga = ctx->rga;
 	int ret;
 
-	ret = pm_runtime_get_sync(rga->dev);
+	ret = pm_runtime_resume_and_get(rga->dev);
 	if (ret < 0) {
-		pm_runtime_put_noidle(rga->dev);
 		rga_buf_return_buffers(q, VB2_BUF_STATE_QUEUED);
 		return ret;
 	}
drivers/media/platform/rockchip/rga/rga.c +3 -1
index 9d122429706e..bf3fd71ec3af 100644
@@ -866,7 +866,9 @@ static int rga_probe(struct platform_device *pdev)
 		goto unreg_video_dev;
 	}
 
-	pm_runtime_get_sync(rga->dev);
+	ret = pm_runtime_resume_and_get(rga->dev);
+	if (ret < 0)
+		goto unreg_video_dev;
 
 	rga->version.major = (rga_read(rga, RGA_VERSION_INFO) >> 24) & 0xFF;
 	rga->version.minor = (rga_read(rga, RGA_VERSION_INFO) >> 20) & 0x0F;
Signature · 1 line
2.30.2
author maintainer
#65 lore raw

PATCH 65/236 regulator: vctrl: Avoid lockdep warning in enable/disable ops

In reply to Greg Kroah-Hartman

From: Chen-Yu Tsai <[email protected]>

[ Upstream commit 21e39809fd7c4b8ff3662f23e0168e87594c8ca8 ]

vctrl_enable() and vctrl_disable() call regulator_enable() and regulator_disable(), respectively. However, vctrl_* are regulator ops and should not be calling the locked regulator APIs. Doing so results in a lockdep warning.

Instead of exporting more internal regulator ops, model the ctrl supply as an actual supply to vctrl-regulator. At probe time this driver still needs to use the consumer API to fetch its constraints, but otherwise lets the regulator core handle the upstream supply for it.

The enable/disable/is_enabled ops are not removed, but now only track state internally. This preserves the original behavior with the ops being available, but one could argue that the original behavior was already incorrect: the internal state would not match the upstream supply if that supply had another consumer that enabled the supply, while vctrl-regulator was not enabled.

The lockdep warning is as follows:

	WARNING: possible circular locking dependency detected
	5.14.0-rc6 #2 Not tainted
	------------------------------------------------------
	swapper/0/1 is trying to acquire lock:
	ffffffc011306d00 (regulator_list_mutex){+.+.}-{3:3}, at:
		regulator_lock_dependent (arch/arm64/include/asm/current.h:19
					  include/linux/ww_mutex.h:111
					  drivers/regulator/core.c:329)

	but task is already holding lock:
	ffffff8004a77160 (regulator_ww_class_mutex){+.+.}-{3:3}, at:
		regulator_lock_recursive (drivers/regulator/core.c:156
					  drivers/regulator/core.c:263)

	which lock already depends on the new lock.

	the existing dependency chain (in reverse order) is:

	-> #2 (regulator_ww_class_mutex){+.+.}-{3:3}:
	__mutex_lock_common (include/asm-generic/atomic-instrumented.h:606
			     include/asm-generic/atomic-long.h:29
			     kernel/locking/mutex.c:103
			     kernel/locking/mutex.c:144
			     kernel/locking/mutex.c:963)
	ww_mutex_lock (kernel/locking/mutex.c:1199)
	regulator_lock_recursive (drivers/regulator/core.c:156
				  drivers/regulator/core.c:263)
	regulator_lock_dependent (drivers/regulator/core.c:343)
	regulator_enable (drivers/regulator/core.c:2808)
	set_machine_constraints (drivers/regulator/core.c:1536)
	regulator_register (drivers/regulator/core.c:5486)
	devm_regulator_register (drivers/regulator/devres.c:196)
	reg_fixed_voltage_probe (drivers/regulator/fixed.c:289)
	platform_probe (drivers/base/platform.c:1427)
	[...]

	-> #1 (regulator_ww_class_acquire){+.+.}-{0:0}:
	regulator_lock_dependent (include/linux/ww_mutex.h:129
				  drivers/regulator/core.c:329)
	regulator_enable (drivers/regulator/core.c:2808)
	set_machine_constraints (drivers/regulator/core.c:1536)
	regulator_register (drivers/regulator/core.c:5486)
	devm_regulator_register (drivers/regulator/devres.c:196)
	reg_fixed_voltage_probe (drivers/regulator/fixed.c:289)
	[...]

	-> #0 (regulator_list_mutex){+.+.}-{3:3}:
	__lock_acquire (kernel/locking/lockdep.c:3052 (discriminator 4)
			kernel/locking/lockdep.c:3174 (discriminator 4)
			kernel/locking/lockdep.c:3789 (discriminator 4)
			kernel/locking/lockdep.c:5015 (discriminator 4))
	lock_acquire (arch/arm64/include/asm/percpu.h:39
		      kernel/locking/lockdep.c:438
		      kernel/locking/lockdep.c:5627)
	__mutex_lock_common (include/asm-generic/atomic-instrumented.h:606
			     include/asm-generic/atomic-long.h:29
			     kernel/locking/mutex.c:103
			     kernel/locking/mutex.c:144
			     kernel/locking/mutex.c:963)
	mutex_lock_nested (kernel/locking/mutex.c:1125)
	regulator_lock_dependent (arch/arm64/include/asm/current.h:19
				  include/linux/ww_mutex.h:111
				  drivers/regulator/core.c:329)
	regulator_enable (drivers/regulator/core.c:2808)
	vctrl_enable (drivers/regulator/vctrl-regulator.c:400)
	_regulator_do_enable (drivers/regulator/core.c:2617)
	_regulator_enable (drivers/regulator/core.c:2764)
	regulator_enable (drivers/regulator/core.c:308
			  drivers/regulator/core.c:2809)
	_set_opp (drivers/opp/core.c:819 drivers/opp/core.c:1072)
	dev_pm_opp_set_rate (drivers/opp/core.c:1164)
	set_target (drivers/cpufreq/cpufreq-dt.c:62)
	__cpufreq_driver_target (drivers/cpufreq/cpufreq.c:2216
				 drivers/cpufreq/cpufreq.c:2271)
	cpufreq_online (drivers/cpufreq/cpufreq.c:1488 (discriminator 2))
	cpufreq_add_dev (drivers/cpufreq/cpufreq.c:1563)
	subsys_interface_register (drivers/base/bus.c:?)
	cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2819)
	dt_cpufreq_probe (drivers/cpufreq/cpufreq-dt.c:344)
	[...]

	other info that might help us debug this:

	Chain exists of:
	  regulator_list_mutex --> regulator_ww_class_acquire --> regulator_ww_class_mutex

	 Possible unsafe locking scenario:

	       CPU0                    CPU1
	       ----                    ----
	  lock(regulator_ww_class_mutex);
				       lock(regulator_ww_class_acquire);
				       lock(regulator_ww_class_mutex);
	  lock(regulator_list_mutex);

	 *** DEADLOCK ***

	6 locks held by swapper/0/1:
	#0: ffffff8002d32188 (&dev->mutex){....}-{3:3}, at:
		__device_driver_lock (drivers/base/dd.c:1030)
	#1: ffffffc0111a0520 (cpu_hotplug_lock){++++}-{0:0}, at:
		cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2792 (discriminator 2))
	#2: ffffff8002a8d918 (subsys mutex#9){+.+.}-{3:3}, at:
		subsys_interface_register (drivers/base/bus.c:1033)
	#3: ffffff800341bb90 (&policy->rwsem){+.+.}-{3:3}, at:
		cpufreq_online (include/linux/bitmap.h:285
				include/linux/cpumask.h:405
				drivers/cpufreq/cpufreq.c:1399)
	#4: ffffffc011f0b7b8 (regulator_ww_class_acquire){+.+.}-{0:0}, at:
		regulator_enable (drivers/regulator/core.c:2808)
	#5: ffffff8004a77160 (regulator_ww_class_mutex){+.+.}-{3:3}, at:
		regulator_lock_recursive (drivers/regulator/core.c:156
		drivers/regulator/core.c:263)

	stack backtrace:
	CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.14.0-rc6 #2 7c8f8996d021ed0f65271e6aeebf7999de74a9fa
	Hardware name: Google Scarlet (DT)
	Call trace:
	dump_backtrace (arch/arm64/kernel/stacktrace.c:161)
	show_stack (arch/arm64/kernel/stacktrace.c:218)
	dump_stack_lvl (lib/dump_stack.c:106 (discriminator 2))
	dump_stack (lib/dump_stack.c:113)
	print_circular_bug (kernel/locking/lockdep.c:?)
	check_noncircular (kernel/locking/lockdep.c:?)
	__lock_acquire (kernel/locking/lockdep.c:3052 (discriminator 4)
			kernel/locking/lockdep.c:3174 (discriminator 4)
			kernel/locking/lockdep.c:3789 (discriminator 4)
			kernel/locking/lockdep.c:5015 (discriminator 4))
	lock_acquire (arch/arm64/include/asm/percpu.h:39
		      kernel/locking/lockdep.c:438
		      kernel/locking/lockdep.c:5627)
	__mutex_lock_common (include/asm-generic/atomic-instrumented.h:606
			     include/asm-generic/atomic-long.h:29
			     kernel/locking/mutex.c:103
			     kernel/locking/mutex.c:144
			     kernel/locking/mutex.c:963)
	mutex_lock_nested (kernel/locking/mutex.c:1125)
	regulator_lock_dependent (arch/arm64/include/asm/current.h:19
				  include/linux/ww_mutex.h:111
				  drivers/regulator/core.c:329)
	regulator_enable (drivers/regulator/core.c:2808)
	vctrl_enable (drivers/regulator/vctrl-regulator.c:400)
	_regulator_do_enable (drivers/regulator/core.c:2617)
	_regulator_enable (drivers/regulator/core.c:2764)
	regulator_enable (drivers/regulator/core.c:308
			  drivers/regulator/core.c:2809)
	_set_opp (drivers/opp/core.c:819 drivers/opp/core.c:1072)
	dev_pm_opp_set_rate (drivers/opp/core.c:1164)
	set_target (drivers/cpufreq/cpufreq-dt.c:62)
	__cpufreq_driver_target (drivers/cpufreq/cpufreq.c:2216
				 drivers/cpufreq/cpufreq.c:2271)
	cpufreq_online (drivers/cpufreq/cpufreq.c:1488 (discriminator 2))
	cpufreq_add_dev (drivers/cpufreq/cpufreq.c:1563)
	subsys_interface_register (drivers/base/bus.c:?)
	cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2819)
	dt_cpufreq_probe (drivers/cpufreq/cpufreq-dt.c:344)
	[...]
Fixes f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking")
Fixes e9153311491d ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage")
---
 drivers/regulator/vctrl-regulator.c | 72 +++++++++++++++++------------
 1 file changed, 42 insertions(+), 30 deletions(-)
drivers/regulator/vctrl-regulator.c +42 -30
index 93d33201ffe0..d2a37978fc3a 100644
@@ -37,7 +37,6 @@ struct vctrl_voltage_table {
 struct vctrl_data {
 	struct regulator_dev *rdev;
 	struct regulator_desc desc;
-	struct regulator *ctrl_reg;
 	bool enabled;
 	unsigned int min_slew_down_rate;
 	unsigned int ovp_threshold;
@@ -82,7 +81,12 @@ static int vctrl_calc_output_voltage(struct vctrl_data *vctrl, int ctrl_uV)
 static int vctrl_get_voltage(struct regulator_dev *rdev)
 {
 	struct vctrl_data *vctrl = rdev_get_drvdata(rdev);
-	int ctrl_uV = regulator_get_voltage_rdev(vctrl->ctrl_reg->rdev);
+	int ctrl_uV;
+
+	if (!rdev->supply)
+		return -EPROBE_DEFER;
+
+	ctrl_uV = regulator_get_voltage_rdev(rdev->supply->rdev);
 
 	return vctrl_calc_output_voltage(vctrl, ctrl_uV);
 }
@@ -92,14 +96,19 @@ static int vctrl_set_voltage(struct regulator_dev *rdev,
 			     unsigned int *selector)
 {
 	struct vctrl_data *vctrl = rdev_get_drvdata(rdev);
-	struct regulator *ctrl_reg = vctrl->ctrl_reg;
-	int orig_ctrl_uV = regulator_get_voltage_rdev(ctrl_reg->rdev);
-	int uV = vctrl_calc_output_voltage(vctrl, orig_ctrl_uV);
+	int orig_ctrl_uV;
+	int uV;
 	int ret;
 
+	if (!rdev->supply)
+		return -EPROBE_DEFER;
+
+	orig_ctrl_uV = regulator_get_voltage_rdev(rdev->supply->rdev);
+	uV = vctrl_calc_output_voltage(vctrl, orig_ctrl_uV);
+
 	if (req_min_uV >= uV || !vctrl->ovp_threshold)
 		/* voltage rising or no OVP */
-		return regulator_set_voltage_rdev(ctrl_reg->rdev,
+		return regulator_set_voltage_rdev(rdev->supply->rdev,
 			vctrl_calc_ctrl_voltage(vctrl, req_min_uV),
 			vctrl_calc_ctrl_voltage(vctrl, req_max_uV),
 			PM_SUSPEND_ON);
@@ -117,7 +126,7 @@ static int vctrl_set_voltage(struct regulator_dev *rdev,
 		next_uV = max_t(int, req_min_uV, uV - max_drop_uV);
 		next_ctrl_uV = vctrl_calc_ctrl_voltage(vctrl, next_uV);
 
-		ret = regulator_set_voltage_rdev(ctrl_reg->rdev,
+		ret = regulator_set_voltage_rdev(rdev->supply->rdev,
 					    next_ctrl_uV,
 					    next_ctrl_uV,
 					    PM_SUSPEND_ON);
@@ -134,7 +143,7 @@ static int vctrl_set_voltage(struct regulator_dev *rdev,
 
 err:
 	/* Try to go back to original voltage */
-	regulator_set_voltage_rdev(ctrl_reg->rdev, orig_ctrl_uV, orig_ctrl_uV,
+	regulator_set_voltage_rdev(rdev->supply->rdev, orig_ctrl_uV, orig_ctrl_uV,
 				   PM_SUSPEND_ON);
 
 	return ret;
@@ -151,16 +160,18 @@ static int vctrl_set_voltage_sel(struct regulator_dev *rdev,
 				 unsigned int selector)
 {
 	struct vctrl_data *vctrl = rdev_get_drvdata(rdev);
-	struct regulator *ctrl_reg = vctrl->ctrl_reg;
 	unsigned int orig_sel = vctrl->sel;
 	int ret;
 
+	if (!rdev->supply)
+		return -EPROBE_DEFER;
+
 	if (selector >= rdev->desc->n_voltages)
 		return -EINVAL;
 
 	if (selector >= vctrl->sel || !vctrl->ovp_threshold) {
 		/* voltage rising or no OVP */
-		ret = regulator_set_voltage_rdev(ctrl_reg->rdev,
+		ret = regulator_set_voltage_rdev(rdev->supply->rdev,
 					    vctrl->vtable[selector].ctrl,
 					    vctrl->vtable[selector].ctrl,
 					    PM_SUSPEND_ON);
@@ -179,7 +190,7 @@ static int vctrl_set_voltage_sel(struct regulator_dev *rdev,
 		else
 			next_sel = vctrl->vtable[vctrl->sel].ovp_min_sel;
 
-		ret = regulator_set_voltage_rdev(ctrl_reg->rdev,
+		ret = regulator_set_voltage_rdev(rdev->supply->rdev,
 					    vctrl->vtable[next_sel].ctrl,
 					    vctrl->vtable[next_sel].ctrl,
 					    PM_SUSPEND_ON);
@@ -202,7 +213,7 @@ static int vctrl_set_voltage_sel(struct regulator_dev *rdev,
 err:
 	if (vctrl->sel != orig_sel) {
 		/* Try to go back to original voltage */
-		if (!regulator_set_voltage_rdev(ctrl_reg->rdev,
+		if (!regulator_set_voltage_rdev(rdev->supply->rdev,
 					   vctrl->vtable[orig_sel].ctrl,
 					   vctrl->vtable[orig_sel].ctrl,
 					   PM_SUSPEND_ON))
@@ -234,10 +245,6 @@ static int vctrl_parse_dt(struct platform_device *pdev,
 	u32 pval;
 	u32 vrange_ctrl[2];
 
-	vctrl->ctrl_reg = devm_regulator_get(&pdev->dev, "ctrl");
-	if (IS_ERR(vctrl->ctrl_reg))
-		return PTR_ERR(vctrl->ctrl_reg);
-
 	ret = of_property_read_u32(np, "ovp-threshold-percent", &pval);
 	if (!ret) {
 		vctrl->ovp_threshold = pval;
@@ -315,11 +322,11 @@ static int vctrl_cmp_ctrl_uV(const void *a, const void *b)
 	return at->ctrl - bt->ctrl;
 }
 
-static int vctrl_init_vtable(struct platform_device *pdev)
+static int vctrl_init_vtable(struct platform_device *pdev,
+			     struct regulator *ctrl_reg)
 {
 	struct vctrl_data *vctrl = platform_get_drvdata(pdev);
 	struct regulator_desc *rdesc = &vctrl->desc;
-	struct regulator *ctrl_reg = vctrl->ctrl_reg;
 	struct vctrl_voltage_range *vrange_ctrl = &vctrl->vrange.ctrl;
 	int n_voltages;
 	int ctrl_uV;
@@ -395,23 +402,19 @@ static int vctrl_init_vtable(struct platform_device *pdev)
 static int vctrl_enable(struct regulator_dev *rdev)
 {
 	struct vctrl_data *vctrl = rdev_get_drvdata(rdev);
-	int ret = regulator_enable(vctrl->ctrl_reg);
 
-	if (!ret)
-		vctrl->enabled = true;
+	vctrl->enabled = true;
 
-	return ret;
+	return 0;
 }
 
 static int vctrl_disable(struct regulator_dev *rdev)
 {
 	struct vctrl_data *vctrl = rdev_get_drvdata(rdev);
-	int ret = regulator_disable(vctrl->ctrl_reg);
 
-	if (!ret)
-		vctrl->enabled = false;
+	vctrl->enabled = false;
 
-	return ret;
+	return 0;
 }
 
 static int vctrl_is_enabled(struct regulator_dev *rdev)
@@ -447,6 +450,7 @@ static int vctrl_probe(struct platform_device *pdev)
 	struct regulator_desc *rdesc;
 	struct regulator_config cfg = { };
 	struct vctrl_voltage_range *vrange_ctrl;
+	struct regulator *ctrl_reg;
 	int ctrl_uV;
 	int ret;
 
@@ -461,15 +465,20 @@ static int vctrl_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	ctrl_reg = devm_regulator_get(&pdev->dev, "ctrl");
+	if (IS_ERR(ctrl_reg))
+		return PTR_ERR(ctrl_reg);
+
 	vrange_ctrl = &vctrl->vrange.ctrl;
 
 	rdesc = &vctrl->desc;
 	rdesc->name = "vctrl";
 	rdesc->type = REGULATOR_VOLTAGE;
 	rdesc->owner = THIS_MODULE;
+	rdesc->supply_name = "ctrl";
 
-	if ((regulator_get_linear_step(vctrl->ctrl_reg) == 1) ||
-	    (regulator_count_voltages(vctrl->ctrl_reg) == -EINVAL)) {
+	if ((regulator_get_linear_step(ctrl_reg) == 1) ||
+	    (regulator_count_voltages(ctrl_reg) == -EINVAL)) {
 		rdesc->continuous_voltage_range = true;
 		rdesc->ops = &vctrl_ops_cont;
 	} else {
@@ -486,12 +495,12 @@ static int vctrl_probe(struct platform_device *pdev)
 	cfg.init_data = init_data;
 
 	if (!rdesc->continuous_voltage_range) {
-		ret = vctrl_init_vtable(pdev);
+		ret = vctrl_init_vtable(pdev, ctrl_reg);
 		if (ret)
 			return ret;
 
 		/* Use locked consumer API when not in regulator framework */
-		ctrl_uV = regulator_get_voltage(vctrl->ctrl_reg);
+		ctrl_uV = regulator_get_voltage(ctrl_reg);
 		if (ctrl_uV < 0) {
 			dev_err(&pdev->dev, "failed to get control voltage\n");
 			return ctrl_uV;
@@ -514,6 +523,9 @@ static int vctrl_probe(struct platform_device *pdev)
 		}
 	}
 
+	/* Drop ctrl-supply here in favor of regulator core managed supply */
+	devm_regulator_put(ctrl_reg);
+
 	vctrl->rdev = devm_regulator_register(&pdev->dev, rdesc, &cfg);
 	if (IS_ERR(vctrl->rdev)) {
 		ret = PTR_ERR(vctrl->rdev);
Signature · 1 line
2.30.2
author maintainer
#66 lore raw

PATCH 66/236 spi: sprd: Fix the wrong WDG_LOAD_VAL

In reply to Greg Kroah-Hartman

From: Chunyan Zhang <[email protected]>

[ Upstream commit 245ca2cc212bb2a078332ec99afbfbb202f44c2d ]

Use 50ms as default timeout value and the time clock is 32768HZ. The original value of WDG_LOAD_VAL is not correct, so this patch fixes it.

Fixes ac1775012058 ("spi: sprd: Add the support of restarting the system")
---
 drivers/spi/spi-sprd-adi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/spi/spi-sprd-adi.c +1 -1
index 392ec5cfa3d6..307c079b938d 100644
@@ -103,7 +103,7 @@
 #define HWRST_STATUS_WATCHDOG		0xf0
 
 /* Use default timeout 50 ms that converts to watchdog values */
-#define WDG_LOAD_VAL			((50 * 1000) / 32768)
+#define WDG_LOAD_VAL			((50 * 32768) / 1000)
 #define WDG_LOAD_MASK			GENMASK(15, 0)
 #define WDG_UNLOCK_KEY			0xe551
 
Signature · 1 line
2.30.2
author maintainer
#67 lore raw

PATCH 67/236 spi: spi-zynq-qspi: use wait_for_completion_timeout to make zynq_qspi_exec_mem_op not interruptible

In reply to Greg Kroah-Hartman

From: Quanyang Wang <[email protected]>

[ Upstream commit 26cfc0dbe43aae60dc03af27077775244f26c167 ]

The function wait_for_completion_interruptible_timeout will return -ERESTARTSYS immediately when receiving SIGKILL signal which is sent by "jffs2_gcd_mtd" during umounting jffs2. This will break the SPI memory operation because the data transmitting may begin before the command or address transmitting completes. Use wait_for_completion_timeout to prevent the process from being interruptible.

Fixes 67dca5e580f1 ("spi: spi-mem: Add support for Zynq QSPI controller")
---
 drivers/spi/spi-zynq-qspi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/spi/spi-zynq-qspi.c +4 -4
index 68193db8b2e3..b635835729d6 100644
@@ -545,7 +545,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
 		zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
 		zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
 				ZYNQ_QSPI_IXR_RXTX_MASK);
-		if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion,
+		if (!wait_for_completion_timeout(&xqspi->data_completion,
 							       msecs_to_jiffies(1000)))
 			err = -ETIMEDOUT;
 	}
@@ -563,7 +563,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
 		zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
 		zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
 				ZYNQ_QSPI_IXR_RXTX_MASK);
-		if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion,
+		if (!wait_for_completion_timeout(&xqspi->data_completion,
 							       msecs_to_jiffies(1000)))
 			err = -ETIMEDOUT;
 	}
@@ -579,7 +579,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
 		zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
 		zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
 				ZYNQ_QSPI_IXR_RXTX_MASK);
-		if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion,
+		if (!wait_for_completion_timeout(&xqspi->data_completion,
 							       msecs_to_jiffies(1000)))
 			err = -ETIMEDOUT;
 
@@ -603,7 +603,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
 		zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
 		zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
 				ZYNQ_QSPI_IXR_RXTX_MASK);
-		if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion,
+		if (!wait_for_completion_timeout(&xqspi->data_completion,
 							       msecs_to_jiffies(1000)))
 			err = -ETIMEDOUT;
 	}
Signature · 1 line
2.30.2
author maintainer
#68 lore raw

PATCH 68/236 EDAC/i10nm: Fix NVDIMM detection

In reply to Greg Kroah-Hartman

From: Qiuxu Zhuo <[email protected]>

[ Upstream commit 2294a7299f5e51667b841f63c6d69474491753fb ]

MCDDRCFG is a per-channel register and uses bit{0,1} to indicate the NVDIMM presence on DIMM slot{0,1}. Current i10nm_edac driver wrongly uses MCDDRCFG as per-DIMM register and fails to detect the NVDIMM.

Fix it by reading MCDDRCFG as per-channel register and using its bit{0,1} to check whether the NVDIMM is populated on DIMM slot{0,1}.

Fixes d4dc89d069aa ("EDAC, i10nm: Add a driver for Intel 10nm server processors")
---
 drivers/edac/i10nm_base.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/edac/i10nm_base.c +3 -3
index 4912a7b88380..3a7362f968c9 100644
@@ -26,8 +26,8 @@
 	pci_read_config_dword((d)->uracu, 0xd8 + (i) * 4, &(reg))
 #define I10NM_GET_DIMMMTR(m, i, j)	\
 	readl((m)->mbase + 0x2080c + (i) * 0x4000 + (j) * 4)
-#define I10NM_GET_MCDDRTCFG(m, i, j)	\
-	readl((m)->mbase + 0x20970 + (i) * 0x4000 + (j) * 4)
+#define I10NM_GET_MCDDRTCFG(m, i)	\
+	readl((m)->mbase + 0x20970 + (i) * 0x4000)
 #define I10NM_GET_MCMTR(m, i)		\
 	readl((m)->mbase + 0x20ef8 + (i) * 0x4000)
 
@@ -170,10 +170,10 @@ static int i10nm_get_dimm_config(struct mem_ctl_info *mci)
 			continue;
 
 		ndimms = 0;
+		mcddrtcfg = I10NM_GET_MCDDRTCFG(imc, i);
 		for (j = 0; j < I10NM_NUM_DIMMS; j++) {
 			dimm = edac_get_dimm(mci, i, j, 0);
 			mtr = I10NM_GET_DIMMMTR(imc, i, j);
-			mcddrtcfg = I10NM_GET_MCDDRTCFG(imc, i, j);
 			edac_dbg(1, "dimmmtr 0x%x mcddrtcfg 0x%x (mc%d ch%d dimm%d)\n",
 				 mtr, mcddrtcfg, imc->mc, i, j);
 
Signature · 1 line
2.30.2
author maintainer
#69 lore raw

PATCH 69/236 drm/panfrost: Fix missing clk_disable_unprepare() on error in panfrost_clk_init()

In reply to Greg Kroah-Hartman

From: Wei Yongjun <[email protected]>

[ Upstream commit f42498705965bd4b026953c1892c686d8b1138e4 ]

Fix the missing clk_disable_unprepare() before return from panfrost_clk_init() in the error handling case.

---
 drivers/gpu/drm/panfrost/panfrost_device.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/panfrost/panfrost_device.c +2 -1
index bf7c34cfb84c..c256929e859b 100644
@@ -60,7 +60,8 @@ static int panfrost_clk_init(struct panfrost_device *pfdev)
 	if (IS_ERR(pfdev->bus_clock)) {
 		dev_err(pfdev->dev, "get bus_clock failed %ld\n",
 			PTR_ERR(pfdev->bus_clock));
-		return PTR_ERR(pfdev->bus_clock);
+		err = PTR_ERR(pfdev->bus_clock);
+		goto disable_clock;
 	}
 
 	if (pfdev->bus_clock) {
Signature · 1 line
2.30.2
author maintainer
#61 lore raw

PATCH 61/236 x86/mce: Defer processing of early errors

In reply to Greg Kroah-Hartman

From: Borislav Petkov <[email protected]>

[ Upstream commit 3bff147b187d5dfccfca1ee231b0761a89f1eff5 ]

When a fatal machine check results in a system reset, Linux does not clear the error(s) from machine check bank(s) - hardware preserves the machine check banks across a warm reset.

During initialization of the kernel after the reboot, Linux reads, logs, and clears all machine check banks.

But there is a problem. In:

5de97c9f6d85 ("x86/mce: Factor out and deprecate the /dev/mcelog driver")

the call to mce_register_decode_chain() moved later in the boot sequence. This means that /dev/mcelog doesn't see those early error logs.

This was partially fixed by:

cd9c57cad3fe ("x86/MCE: Dump MCE to dmesg if no consumers")

which made sure that the logs were not lost completely by printing to the console. But parsing console logs is error prone. Users of /dev/mcelog should expect to find any early errors logged to standard places.

Add a new flag MCP_QUEUE_LOG to machine_check_poll() to be used in early machine check initialization to indicate that any errors found should just be queued to genpool. When mcheck_late_init() is called it will call mce_schedule_work() to actually log and flush any errors queued in the genpool.

[ Based on an original patch, commit message by and completely
productized by Tony Luck. ]

Fixes 5de97c9f6d85 ("x86/mce: Factor out and deprecate the /dev/mcelog driver")
---
 arch/x86/include/asm/mce.h     |  1 +
 arch/x86/kernel/cpu/mce/core.c | 11 ++++++++---
 2 files changed, 9 insertions(+), 3 deletions(-)
arch/x86/include/asm/mce.h +1 -0
index fc25c88c7ff2..9b5ff423e939 100644
@@ -259,6 +259,7 @@ enum mcp_flags {
 	MCP_TIMESTAMP	= BIT(0),	/* log time stamp */
 	MCP_UC		= BIT(1),	/* log uncorrected errors */
 	MCP_DONTLOG	= BIT(2),	/* only clear, don't log */
+	MCP_QUEUE_LOG	= BIT(3),	/* only queue to genpool */
 };
 bool machine_check_poll(enum mcp_flags flags, mce_banks_t *b);
 
arch/x86/kernel/cpu/mce/core.c +8 -3
index b7a27589dfa0..056d0367864e 100644
@@ -817,7 +817,10 @@ log_it:
 		if (mca_cfg.dont_log_ce && !mce_usable_address(&m))
 			goto clear_it;
 
-		mce_log(&m);
+		if (flags & MCP_QUEUE_LOG)
+			mce_gen_pool_add(&m);
+		else
+			mce_log(&m);
 
 clear_it:
 		/*
@@ -1628,10 +1631,12 @@ static void __mcheck_cpu_init_generic(void)
 		m_fl = MCP_DONTLOG;
 
 	/*
-	 * Log the machine checks left over from the previous reset.
+	 * Log the machine checks left over from the previous reset. Log them
+	 * only, do not start processing them. That will happen in mcheck_late_init()
+	 * when all consumers have been registered on the notifier chain.
 	 */
 	bitmap_fill(all_banks, MAX_NR_BANKS);
-	machine_check_poll(MCP_UC | m_fl, &all_banks);
+	machine_check_poll(MCP_UC | MCP_QUEUE_LOG | m_fl, &all_banks);
 
 	cr4_set_bits(X86_CR4_MCE);
 
Signature · 1 line
2.30.2
author maintainer
#70 lore raw

PATCH 70/236 drm/gma500: Fix end of loop tests for list_for_each_entry

In reply to Greg Kroah-Hartman

From: Harshvardhan Jha <[email protected]>

[ Upstream commit ea9a897b8affa0f7b4c90182b785dded74e434aa ]

The list_for_each_entry() iterator, "connector" in this code, can never be NULL. If we exit the loop without finding the correct connector then "connector" points invalid memory that is an offset from the list head. This will eventually lead to memory corruption and presumably a kernel crash.

Fixes 9bd81acdb648 ("gma500: Convert Oaktrail to work with new output handling")
---
 drivers/gpu/drm/gma500/oaktrail_lvds.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/gma500/oaktrail_lvds.c +1 -1
index 2828360153d1..30b949d6856c 100644
@@ -117,7 +117,7 @@ static void oaktrail_lvds_mode_set(struct drm_encoder *encoder,
 			continue;
 	}
 
-	if (!connector) {
+	if (list_entry_is_head(connector, &mode_config->connector_list, head)) {
 		DRM_ERROR("Couldn't find connector when setting mode");
 		gma_power_end(dev);
 		return;
Signature · 1 line
2.30.2
author maintainer
#98 lore raw

PATCH 98/236 media: coda: fix frame_mem_ctrl for YUV420 and YVU420 formats

In reply to Greg Kroah-Hartman

From: Philipp Zabel <[email protected]>

[ Upstream commit 44693d74f5653f82cd7ca0fe730eed0f6b83306a ]

The frame memory control register value is currently determined before userspace selects the final capture format and never corrected. Update ctx->frame_mem_ctrl in __coda_start_decoding() to fix decoding into YUV420 or YVU420 capture buffers.

Fixes 497e6b8559a6 ("media: coda: add sequence initialization work")
---
 drivers/media/platform/coda/coda-bit.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)
drivers/media/platform/coda/coda-bit.c +13 -5
index bf75927bac4e..159c9de85788 100644
@@ -2031,17 +2031,25 @@ static int __coda_start_decoding(struct coda_ctx *ctx)
 	u32 src_fourcc, dst_fourcc;
 	int ret;
 
+	q_data_src = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
+	q_data_dst = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+	src_fourcc = q_data_src->fourcc;
+	dst_fourcc = q_data_dst->fourcc;
+
 	if (!ctx->initialized) {
 		ret = __coda_decoder_seq_init(ctx);
 		if (ret < 0)
 			return ret;
+	} else {
+		ctx->frame_mem_ctrl &= ~(CODA_FRAME_CHROMA_INTERLEAVE | (0x3 << 9) |
+					 CODA9_FRAME_TILED2LINEAR);
+		if (dst_fourcc == V4L2_PIX_FMT_NV12 || dst_fourcc == V4L2_PIX_FMT_YUYV)
+			ctx->frame_mem_ctrl |= CODA_FRAME_CHROMA_INTERLEAVE;
+		if (ctx->tiled_map_type == GDI_TILED_FRAME_MB_RASTER_MAP)
+			ctx->frame_mem_ctrl |= (0x3 << 9) |
+				((ctx->use_vdoa) ? 0 : CODA9_FRAME_TILED2LINEAR);
 	}
 
-	q_data_src = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
-	q_data_dst = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
-	src_fourcc = q_data_src->fourcc;
-	dst_fourcc = q_data_dst->fourcc;
-
 	coda_write(dev, ctx->parabuf.paddr, CODA_REG_BIT_PARA_BUF_ADDR);
 
 	ret = coda_alloc_framebuffers(ctx, q_data_dst, src_fourcc);
Signature · 1 line
2.30.2
author maintainer
#108 lore raw

PATCH 108/236 net/mlx5e: Prohibit inner indir TIRs in IPoIB

In reply to Greg Kroah-Hartman

From: Maxim Mikityanskiy <[email protected]>

[ Upstream commit 9c43f3865c2a03be104f1c1d5e9129c2a2bdba88 ]

TIR's rx_hash_field_selector_inner can be enabled only when tunneled_offload_en = 1. tunneled_offload_en is filled according to the tunneled_offload_en field in struct mlx5e_params, which is false in the IPoIB profile. On the other hand, the IPoIB profile passes inner_ttc = true to mlx5e_create_indirect_tirs, which potentially allows the latter function to attempt to create inner indirect TIRs without having tunneled_offload_en set.

This commit prohibits this behavior by passing inner_ttc = false to mlx5e_create_indirect_tirs. The latter function won't attempt to create inner indirect TIRs.

As inner indirect TIRs are not created in the IPoIB profile (this commit blocks it explicitly, and even before they would have failed to be created), the call to mlx5e_create_inner_ttc_table in mlx5i_create_flow_steering is a no-op and can be removed.

Fixes 46dc933cee82 ("net/mlx5e: Provide explicit directive if to create inner indirect tirs")
Fixes 458821c72bd0 ("net/mlx5e: IPoIB, Add inner TTC table to IPoIB flow steering")
---
 .../net/ethernet/mellanox/mlx5/core/en/fs.h    |  6 ------
 .../net/ethernet/mellanox/mlx5/core/en_fs.c    | 10 +++++-----
 .../ethernet/mellanox/mlx5/core/ipoib/ipoib.c  | 18 ++----------------
 3 files changed, 7 insertions(+), 27 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en/fs.h +0 -6
index dc744702aee4..000ca294b0a0 100644
@@ -262,18 +262,12 @@ struct ttc_params {
 
 void mlx5e_set_ttc_basic_params(struct mlx5e_priv *priv, struct ttc_params *ttc_params);
 void mlx5e_set_ttc_ft_params(struct ttc_params *ttc_params);
-void mlx5e_set_inner_ttc_ft_params(struct ttc_params *ttc_params);
 
 int mlx5e_create_ttc_table(struct mlx5e_priv *priv, struct ttc_params *params,
 			   struct mlx5e_ttc_table *ttc);
 void mlx5e_destroy_ttc_table(struct mlx5e_priv *priv,
 			     struct mlx5e_ttc_table *ttc);
 
-int mlx5e_create_inner_ttc_table(struct mlx5e_priv *priv, struct ttc_params *params,
-				 struct mlx5e_ttc_table *ttc);
-void mlx5e_destroy_inner_ttc_table(struct mlx5e_priv *priv,
-				   struct mlx5e_ttc_table *ttc);
-
 void mlx5e_destroy_flow_table(struct mlx5e_flow_table *ft);
 int mlx5e_ttc_fwd_dest(struct mlx5e_priv *priv, enum mlx5e_traffic_types type,
 		       struct mlx5_flow_destination *new_dest);
drivers/net/ethernet/mellanox/mlx5/core/en_fs.c +5 -5
index 93877becfae2..f405c256b3cd 100644
@@ -1138,7 +1138,7 @@ void mlx5e_set_ttc_basic_params(struct mlx5e_priv *priv,
 	ttc_params->inner_ttc = &priv->fs.inner_ttc;
 }
 
-void mlx5e_set_inner_ttc_ft_params(struct ttc_params *ttc_params)
+static void mlx5e_set_inner_ttc_ft_params(struct ttc_params *ttc_params)
 {
 	struct mlx5_flow_table_attr *ft_attr = &ttc_params->ft_attr;
 
@@ -1157,8 +1157,8 @@ void mlx5e_set_ttc_ft_params(struct ttc_params *ttc_params)
 	ft_attr->prio = MLX5E_NIC_PRIO;
 }
 
-int mlx5e_create_inner_ttc_table(struct mlx5e_priv *priv, struct ttc_params *params,
-				 struct mlx5e_ttc_table *ttc)
+static int mlx5e_create_inner_ttc_table(struct mlx5e_priv *priv, struct ttc_params *params,
+					struct mlx5e_ttc_table *ttc)
 {
 	struct mlx5e_flow_table *ft = &ttc->ft;
 	int err;
@@ -1188,8 +1188,8 @@ err:
 	return err;
 }
 
-void mlx5e_destroy_inner_ttc_table(struct mlx5e_priv *priv,
-				   struct mlx5e_ttc_table *ttc)
+static void mlx5e_destroy_inner_ttc_table(struct mlx5e_priv *priv,
+					  struct mlx5e_ttc_table *ttc)
 {
 	if (!mlx5e_tunnel_inner_ft_supported(priv->mdev))
 		return;
drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c +2 -16
index 97b5fcb1f406..5c6a376aa62e 100644
@@ -337,17 +337,6 @@ static int mlx5i_create_flow_steering(struct mlx5e_priv *priv)
 	}
 
 	mlx5e_set_ttc_basic_params(priv, &ttc_params);
-	mlx5e_set_inner_ttc_ft_params(&ttc_params);
-	for (tt = 0; tt < MLX5E_NUM_INDIR_TIRS; tt++)
-		ttc_params.indir_tirn[tt] = priv->inner_indir_tir[tt].tirn;
-
-	err = mlx5e_create_inner_ttc_table(priv, &ttc_params, &priv->fs.inner_ttc);
-	if (err) {
-		netdev_err(priv->netdev, "Failed to create inner ttc table, err=%d\n",
-			   err);
-		goto err_destroy_arfs_tables;
-	}
-
 	mlx5e_set_ttc_ft_params(&ttc_params);
 	for (tt = 0; tt < MLX5E_NUM_INDIR_TIRS; tt++)
 		ttc_params.indir_tirn[tt] = priv->indir_tir[tt].tirn;
@@ -356,13 +345,11 @@ static int mlx5i_create_flow_steering(struct mlx5e_priv *priv)
 	if (err) {
 		netdev_err(priv->netdev, "Failed to create ttc table, err=%d\n",
 			   err);
-		goto err_destroy_inner_ttc_table;
+		goto err_destroy_arfs_tables;
 	}
 
 	return 0;
 
-err_destroy_inner_ttc_table:
-	mlx5e_destroy_inner_ttc_table(priv, &priv->fs.inner_ttc);
 err_destroy_arfs_tables:
 	mlx5e_arfs_destroy_tables(priv);
 
@@ -372,7 +359,6 @@ err_destroy_arfs_tables:
 static void mlx5i_destroy_flow_steering(struct mlx5e_priv *priv)
 {
 	mlx5e_destroy_ttc_table(priv, &priv->fs.ttc);
-	mlx5e_destroy_inner_ttc_table(priv, &priv->fs.inner_ttc);
 	mlx5e_arfs_destroy_tables(priv);
 }
 
@@ -397,7 +383,7 @@ static int mlx5i_init_rx(struct mlx5e_priv *priv)
 	if (err)
 		goto err_destroy_indirect_rqts;
 
-	err = mlx5e_create_indirect_tirs(priv, true);
+	err = mlx5e_create_indirect_tirs(priv, false);
 	if (err)
 		goto err_destroy_direct_rqts;
 
Signature · 1 line
2.30.2
author maintainer
#107 lore raw

PATCH 107/236 ARM: dts: meson8b: ec100: Fix the pwm regulator supply properties

In reply to Greg Kroah-Hartman

From: Anand Moon <[email protected]>

[ Upstream commit 72ccc373b064ae3ac0c5b5f2306069b60ca118df ]

After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs. Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply instead of dummy regulator.

[    7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree
[    7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed
[    7.117184] VCCK: supplied by regulator-dummy
[    7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT
[    7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled
[    7.118498] VDDEE: will resolve supply early: pwm
[    7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree
[    7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed
[    7.118553] VDDEE: supplied by regulator-dummy
[    7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT
Fixes 087a1d8b4e4c ("ARM: dts: meson8b: ec100: add the VDDEE regulator")
Fixes 3e7db1c1b7a3 ("ARM: dts: meson8b: ec100: improve the description of the regulators")
---
 arch/arm/boot/dts/meson8b-ec100.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/meson8b-ec100.dts +2 -2
index ed06102a4014..c6824d26dbbf 100644
@@ -153,7 +153,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 0 1148 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -237,7 +237,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 1 1148 0>;
 		pwm-dutycycle-range = <100 0>;
Signature · 1 line
2.30.2
author maintainer
#109 lore raw

PATCH 109/236 net/mlx5e: Block LRO if firmware asks for tunneled LRO

In reply to Greg Kroah-Hartman

From: Maxim Mikityanskiy <[email protected]>

[ Upstream commit 26ab7b384525ccfa678c518577f7f0d841209c8b ]

This commit does a cleanup in LRO configuration.

LRO is a parameter of an RQ, but its state is changed by modifying a TIR related to the RQ.

The current status: LRO for tunneled packets is not supported in the driver, inner TIRs may enable LRO on creation, but LRO status of inner TIRs isn't changed in mlx5e_modify_tirs_lro(). This is inconsistent, but as long as the firmware doesn't declare support for tunneled LRO, it works, because the same RQs are shared between the inner and outer TIRs.

This commit does two fixes:

1. If the firmware has the tunneled LRO capability, LRO is blocked altogether, because it's not possible to block it for inner TIRs only, when the same RQs are shared between inner and outer TIRs, and the driver won't be able to handle tunneled LRO traffic.

2. mlx5e_modify_tirs_lro() is patched to modify LRO state for all TIRs, including inner ones, because all TIRs related to an RQ should agree on their LRO state.

Fixes 7b3722fa9ef6 ("net/mlx5e: Support RSS for GRE tunneled packets")
---
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 15 +++++++++++++++
 include/linux/mlx5/mlx5_ifc.h                     |  3 ++-
 2 files changed, 17 insertions(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/en_main.c +15 -0
index 6b4a3d90c9f7..6974090a7efa 100644
@@ -2803,6 +2803,14 @@ static int mlx5e_modify_tirs_lro(struct mlx5e_priv *priv)
 		err = mlx5_core_modify_tir(mdev, priv->indir_tir[tt].tirn, in);
 		if (err)
 			goto free_in;
+
+		/* Verify inner tirs resources allocated */
+		if (!priv->inner_indir_tir[0].tirn)
+			continue;
+
+		err = mlx5_core_modify_tir(mdev, priv->inner_indir_tir[tt].tirn, in);
+		if (err)
+			goto free_in;
 	}
 
 	for (ix = 0; ix < priv->max_nch; ix++) {
@@ -4928,7 +4936,14 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
 	netdev->hw_enc_features  |= NETIF_F_HW_VLAN_CTAG_TX;
 	netdev->hw_enc_features  |= NETIF_F_HW_VLAN_CTAG_RX;
 
+	/* Tunneled LRO is not supported in the driver, and the same RQs are
+	 * shared between inner and outer TIRs, so the driver can't disable LRO
+	 * for inner TIRs while having it enabled for outer TIRs. Due to this,
+	 * block LRO altogether if the firmware declares tunneled LRO support.
+	 */
 	if (!!MLX5_CAP_ETH(mdev, lro_cap) &&
+	    !MLX5_CAP_ETH(mdev, tunnel_lro_vxlan) &&
+	    !MLX5_CAP_ETH(mdev, tunnel_lro_gre) &&
 	    mlx5e_check_fragmented_striding_rq_cap(mdev))
 		netdev->vlan_features    |= NETIF_F_LRO;
 
include/linux/mlx5/mlx5_ifc.h +2 -1
index af8f4e2cf21d..70a3664785f8 100644
@@ -876,7 +876,8 @@ struct mlx5_ifc_per_protocol_networking_offload_caps_bits {
 	u8         scatter_fcs[0x1];
 	u8         enhanced_multi_pkt_send_wqe[0x1];
 	u8         tunnel_lso_const_out_ip_id[0x1];
-	u8         reserved_at_1c[0x2];
+	u8         tunnel_lro_gre[0x1];
+	u8         tunnel_lro_vxlan[0x1];
 	u8         tunnel_stateless_gre[0x1];
 	u8         tunnel_stateless_vxlan[0x1];
 
Signature · 1 line
2.30.2
author maintainer
#110 lore raw

PATCH 110/236 cgroup/cpuset: Fix a partition bug with hotplug

In reply to Greg Kroah-Hartman

From: Waiman Long <[email protected]>

[ Upstream commit 15d428e6fe77fffc3f4fff923336036f5496ef17 ]

In cpuset_hotplug_workfn(), the detection of whether the cpu list has been changed is done by comparing the effective cpus of the top cpuset with the cpu_active_mask. However, in the rare case that just all the CPUs in the subparts_cpus are offlined, the detection fails and the partition states are not updated correctly. Fix it by forcing the cpus_updated flag to true in this particular case.

Fixes 4b842da276a8 ("cpuset: Make CPU hotplug work with partition")
---
 kernel/cgroup/cpuset.c | 7 +++++++
 1 file changed, 7 insertions(+)
kernel/cgroup/cpuset.c +7 -0
index 53c70c470a38..e1601d8dac29 100644
@@ -3168,6 +3168,13 @@ static void cpuset_hotplug_workfn(struct work_struct *work)
 	cpus_updated = !cpumask_equal(top_cpuset.effective_cpus, &new_cpus);
 	mems_updated = !nodes_equal(top_cpuset.effective_mems, new_mems);
 
+	/*
+	 * In the rare case that hotplug removes all the cpus in subparts_cpus,
+	 * we assumed that cpus are updated.
+	 */
+	if (!cpus_updated && top_cpuset.nr_subparts_cpus)
+		cpus_updated = true;
+
 	/* synchronize cpus_allowed to cpu_active_mask */
 	if (cpus_updated) {
 		spin_lock_irq(&callback_lock);
Signature · 1 line
2.30.2
author maintainer
#112 lore raw

PATCH 112/236 drm: mxsfb: Increase number of outstanding requests on V4 and newer HW

In reply to Greg Kroah-Hartman

From: Marek Vasut <[email protected]>

[ Upstream commit 9891cb54445bc65bf156bda416b6215048c7f617 ]

In case the DRAM is under high load, the MXSFB FIFO might underflow and that causes visible artifacts. This could be triggered on i.MX8MM using e.g. "$ memtester 128M" on a device with 1920x1080 panel. The first "Stuck Address" test of the memtester will completely corrupt the image on the panel and leave the MXSFB FIFO in odd state.

To avoid this underflow, increase number of outstanding requests to DRAM from 2 to 16, which is the maximum. This mitigates the issue and it can no longer be triggered.

Fixes 45d59d704080 ("drm: Add new driver for MXSFB controller")
Cc Daniel Abrecht <[email protected]>
Cc Emil Velikov <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Lucas Stach <[email protected]>
Cc Stefan Agner <[email protected]>
---
 drivers/gpu/drm/mxsfb/mxsfb_drv.c  | 3 +++
 drivers/gpu/drm/mxsfb/mxsfb_drv.h  | 1 +
 drivers/gpu/drm/mxsfb/mxsfb_kms.c  | 8 ++++++++
 drivers/gpu/drm/mxsfb/mxsfb_regs.h | 8 ++++++++
 4 files changed, 20 insertions(+)
drivers/gpu/drm/mxsfb/mxsfb_drv.c +3 -0
index 17f26052e845..f31e8ef3c258 100644
@@ -51,6 +51,7 @@ static const struct mxsfb_devdata mxsfb_devdata[] = {
 		.hs_wdth_mask	= 0xff,
 		.hs_wdth_shift	= 24,
 		.has_overlay	= false,
+		.has_ctrl2	= false,
 	},
 	[MXSFB_V4] = {
 		.transfer_count	= LCDC_V4_TRANSFER_COUNT,
@@ -59,6 +60,7 @@ static const struct mxsfb_devdata mxsfb_devdata[] = {
 		.hs_wdth_mask	= 0x3fff,
 		.hs_wdth_shift	= 18,
 		.has_overlay	= false,
+		.has_ctrl2	= true,
 	},
 	[MXSFB_V6] = {
 		.transfer_count	= LCDC_V4_TRANSFER_COUNT,
@@ -67,6 +69,7 @@ static const struct mxsfb_devdata mxsfb_devdata[] = {
 		.hs_wdth_mask	= 0x3fff,
 		.hs_wdth_shift	= 18,
 		.has_overlay	= true,
+		.has_ctrl2	= true,
 	},
 };
 
drivers/gpu/drm/mxsfb/mxsfb_drv.h +1 -0
index 399d23e91ed1..7c720e226fdf 100644
@@ -22,6 +22,7 @@ struct mxsfb_devdata {
 	unsigned int	hs_wdth_mask;
 	unsigned int	hs_wdth_shift;
 	bool		has_overlay;
+	bool		has_ctrl2;
 };
 
 struct mxsfb_drm_private {
drivers/gpu/drm/mxsfb/mxsfb_kms.c +8 -0
index bc6d19d999ac..007ea29abfcc 100644
@@ -107,6 +107,14 @@ static void mxsfb_enable_controller(struct mxsfb_drm_private *mxsfb)
 		clk_prepare_enable(mxsfb->clk_disp_axi);
 	clk_prepare_enable(mxsfb->clk);
 
+	/* Increase number of outstanding requests on all supported IPs */
+	if (mxsfb->devdata->has_ctrl2) {
+		reg = readl(mxsfb->base + LCDC_V4_CTRL2);
+		reg &= ~CTRL2_SET_OUTSTANDING_REQS_MASK;
+		reg |= CTRL2_SET_OUTSTANDING_REQS_16;
+		writel(reg, mxsfb->base + LCDC_V4_CTRL2);
+	}
+
 	/* If it was disabled, re-enable the mode again */
 	writel(CTRL_DOTCLK_MODE, mxsfb->base + LCDC_CTRL + REG_SET);
 
drivers/gpu/drm/mxsfb/mxsfb_regs.h +8 -0
index df90e960f495..694fea13e893 100644
@@ -15,6 +15,7 @@
 #define LCDC_CTRL			0x00
 #define LCDC_CTRL1			0x10
 #define LCDC_V3_TRANSFER_COUNT		0x20
+#define LCDC_V4_CTRL2			0x20
 #define LCDC_V4_TRANSFER_COUNT		0x30
 #define LCDC_V4_CUR_BUF			0x40
 #define LCDC_V4_NEXT_BUF		0x50
@@ -61,6 +62,13 @@
 #define CTRL1_CUR_FRAME_DONE_IRQ_EN	BIT(13)
 #define CTRL1_CUR_FRAME_DONE_IRQ	BIT(9)
 
+#define CTRL2_SET_OUTSTANDING_REQS_1	0
+#define CTRL2_SET_OUTSTANDING_REQS_2	(0x1 << 21)
+#define CTRL2_SET_OUTSTANDING_REQS_4	(0x2 << 21)
+#define CTRL2_SET_OUTSTANDING_REQS_8	(0x3 << 21)
+#define CTRL2_SET_OUTSTANDING_REQS_16	(0x4 << 21)
+#define CTRL2_SET_OUTSTANDING_REQS_MASK	(0x7 << 21)
+
 #define TRANSFER_COUNT_SET_VCOUNT(x)	(((x) & 0xffff) << 16)
 #define TRANSFER_COUNT_GET_VCOUNT(x)	(((x) >> 16) & 0xffff)
 #define TRANSFER_COUNT_SET_HCOUNT(x)	((x) & 0xffff)
Signature · 1 line
2.30.2
author maintainer
#114 lore raw

PATCH 114/236 net: cipso: fix warnings in netlbl_cipsov4_add_std

In reply to Greg Kroah-Hartman

From: Pavel Skripkin <[email protected]>

[ Upstream commit 8ca34a13f7f9b3fa2c464160ffe8cc1a72088204 ]

Syzbot reported warning in netlbl_cipsov4_add(). The problem was in too big doi_def->map.std->lvl.local_size passed to kcalloc(). Since this value comes from userpace there is no need to warn if value is not correct.

The same problem may occur with other kcalloc() calls in this function, so, I've added __GFP_NOWARN flag to all kcalloc() calls there.

Reported-and-tested-by [email protected]
Fixes 96cb8e3313c7 ("[NetLabel]: CIPSOv4 and Unlabeled packet integration")
---
 net/netlabel/netlabel_cipso_v4.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
net/netlabel/netlabel_cipso_v4.c +4 -4
index 4f50a64315cf..50f40943c815 100644
@@ -187,14 +187,14 @@ static int netlbl_cipsov4_add_std(struct genl_info *info,
 		}
 	doi_def->map.std->lvl.local = kcalloc(doi_def->map.std->lvl.local_size,
 					      sizeof(u32),
-					      GFP_KERNEL);
+					      GFP_KERNEL | __GFP_NOWARN);
 	if (doi_def->map.std->lvl.local == NULL) {
 		ret_val = -ENOMEM;
 		goto add_std_failure;
 	}
 	doi_def->map.std->lvl.cipso = kcalloc(doi_def->map.std->lvl.cipso_size,
 					      sizeof(u32),
-					      GFP_KERNEL);
+					      GFP_KERNEL | __GFP_NOWARN);
 	if (doi_def->map.std->lvl.cipso == NULL) {
 		ret_val = -ENOMEM;
 		goto add_std_failure;
@@ -263,7 +263,7 @@ static int netlbl_cipsov4_add_std(struct genl_info *info,
 		doi_def->map.std->cat.local = kcalloc(
 					      doi_def->map.std->cat.local_size,
 					      sizeof(u32),
-					      GFP_KERNEL);
+					      GFP_KERNEL | __GFP_NOWARN);
 		if (doi_def->map.std->cat.local == NULL) {
 			ret_val = -ENOMEM;
 			goto add_std_failure;
@@ -271,7 +271,7 @@ static int netlbl_cipsov4_add_std(struct genl_info *info,
 		doi_def->map.std->cat.cipso = kcalloc(
 					      doi_def->map.std->cat.cipso_size,
 					      sizeof(u32),
-					      GFP_KERNEL);
+					      GFP_KERNEL | __GFP_NOWARN);
 		if (doi_def->map.std->cat.cipso == NULL) {
 			ret_val = -ENOMEM;
 			goto add_std_failure;
Signature · 1 line
2.30.2
author maintainer
#111 lore raw

PATCH 111/236 drm: mxsfb: Enable recovery on underflow

In reply to Greg Kroah-Hartman

From: Marek Vasut <[email protected]>

[ Upstream commit 0c9856e4edcdcac22d65618e8ceff9eb41447880 ]

There is some sort of corner case behavior of the controller, which could rarely be triggered at least on i.MX6SX connected to 800x480 DPI panel and i.MX8MM connected to DPI->DSI->LVDS bridged 1920x1080 panel (and likely on other setups too), where the image on the panel shifts to the right and wraps around. This happens either when the controller is enabled on boot or even later during run time. The condition does not correct itself automatically, i.e. the display image remains shifted.

It seems this problem is known and is due to sporadic underflows of the LCDIF FIFO. While the LCDIF IP does have underflow/overflow IRQs, neither of the IRQs trigger and neither IRQ status bit is asserted when this condition occurs.

All known revisions of the LCDIF IP have CTRL1 RECOVER_ON_UNDERFLOW bit, which is described in the reference manual since i.MX23 as "
Set this bit to enable the LCDIF block to recover in the next field/frame if there was an underflow in the current field/frame.
"
Enable this bit to mitigate the sporadic underflows.

Fixes 45d59d704080 ("drm: Add new driver for MXSFB controller")
Cc Daniel Abrecht <[email protected]>
Cc Emil Velikov <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Lucas Stach <[email protected]>
Cc Stefan Agner <[email protected]>
---
 drivers/gpu/drm/mxsfb/mxsfb_kms.c  | 29 +++++++++++++++++++++++++++++
 drivers/gpu/drm/mxsfb/mxsfb_regs.h |  1 +
 2 files changed, 30 insertions(+)
drivers/gpu/drm/mxsfb/mxsfb_kms.c +29 -0
index 9e1224d54729..bc6d19d999ac 100644
@@ -115,6 +115,35 @@ static void mxsfb_enable_controller(struct mxsfb_drm_private *mxsfb)
 	reg |= VDCTRL4_SYNC_SIGNALS_ON;
 	writel(reg, mxsfb->base + LCDC_VDCTRL4);
 
+	/*
+	 * Enable recovery on underflow.
+	 *
+	 * There is some sort of corner case behavior of the controller,
+	 * which could rarely be triggered at least on i.MX6SX connected
+	 * to 800x480 DPI panel and i.MX8MM connected to DPI->DSI->LVDS
+	 * bridged 1920x1080 panel (and likely on other setups too), where
+	 * the image on the panel shifts to the right and wraps around.
+	 * This happens either when the controller is enabled on boot or
+	 * even later during run time. The condition does not correct
+	 * itself automatically, i.e. the display image remains shifted.
+	 *
+	 * It seems this problem is known and is due to sporadic underflows
+	 * of the LCDIF FIFO. While the LCDIF IP does have underflow/overflow
+	 * IRQs, neither of the IRQs trigger and neither IRQ status bit is
+	 * asserted when this condition occurs.
+	 *
+	 * All known revisions of the LCDIF IP have CTRL1 RECOVER_ON_UNDERFLOW
+	 * bit, which is described in the reference manual since i.MX23 as
+	 * "
+	 *   Set this bit to enable the LCDIF block to recover in the next
+	 *   field/frame if there was an underflow in the current field/frame.
+	 * "
+	 * Enable this bit to mitigate the sporadic underflows.
+	 */
+	reg = readl(mxsfb->base + LCDC_CTRL1);
+	reg |= CTRL1_RECOVER_ON_UNDERFLOW;
+	writel(reg, mxsfb->base + LCDC_CTRL1);
+
 	writel(CTRL_RUN, mxsfb->base + LCDC_CTRL + REG_SET);
 }
 
drivers/gpu/drm/mxsfb/mxsfb_regs.h +1 -0
index 55d28a27f912..df90e960f495 100644
@@ -54,6 +54,7 @@
 #define CTRL_DF24			BIT(1)
 #define CTRL_RUN			BIT(0)
 
+#define CTRL1_RECOVER_ON_UNDERFLOW	BIT(24)
 #define CTRL1_FIFO_CLEAR		BIT(21)
 #define CTRL1_SET_BYTE_PACKAGING(x)	(((x) & 0xf) << 16)
 #define CTRL1_GET_BYTE_PACKAGING(x)	(((x) >> 16) & 0xf)
Signature · 1 line
2.30.2
author maintainer
#113 lore raw

PATCH 113/236 drm: mxsfb: Clear FIFO_CLEAR bit

In reply to Greg Kroah-Hartman

From: Marek Vasut <[email protected]>

[ Upstream commit 5e23c98178eb1a2cdb7c4fee9a39baf8cabf282d ]

Make sure the FIFO_CLEAR bit is latched in when configuring the controller, so that the FIFO is really cleared. And then clear the FIFO_CLEAR bit, since it is not self-clearing.

---
 drivers/gpu/drm/mxsfb/mxsfb_kms.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/mxsfb/mxsfb_kms.c +3 -0
index 007ea29abfcc..b535621f4f78 100644
@@ -243,6 +243,9 @@ static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb)
 
 	/* Clear the FIFOs */
 	writel(CTRL1_FIFO_CLEAR, mxsfb->base + LCDC_CTRL1 + REG_SET);
+	readl(mxsfb->base + LCDC_CTRL1);
+	writel(CTRL1_FIFO_CLEAR, mxsfb->base + LCDC_CTRL1 + REG_CLR);
+	readl(mxsfb->base + LCDC_CTRL1);
 
 	if (mxsfb->devdata->has_overlay)
 		writel(0, mxsfb->base + LCDC_AS_CTRL);
Signature · 1 line
2.30.2
author maintainer
#115 lore raw

PATCH 115/236 Bluetooth: mgmt: Fix wrong opcode in the response for add_adv cmd

In reply to Greg Kroah-Hartman

From: Tedd Ho-Jeong An <[email protected]>

[ Upstream commit a25fca4d3c18766b6f7a3c95fa8faec23ef464c5 ]

This patch fixes the MGMT add_advertising command repsones with the wrong opcode when it is trying to return the not supported error.

Fixes cbbdfa6f33198 ("Bluetooth: Enable controller RPA resolution using Experimental feature")
---
 net/bluetooth/mgmt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/bluetooth/mgmt.c +1 -1
index 31a585fe0c7c..08f67f91d427 100644
@@ -7464,7 +7464,7 @@ static int add_advertising(struct sock *sk, struct hci_dev *hdev,
 	 * advertising.
 	 */
 	if (hci_dev_test_flag(hdev, HCI_ENABLE_LL_PRIVACY))
-		return mgmt_cmd_status(sk, hdev->id, MGMT_OP_SET_ADVERTISING,
+		return mgmt_cmd_status(sk, hdev->id, MGMT_OP_ADD_ADVERTISING,
 				       MGMT_STATUS_NOT_SUPPORTED);
 
 	if (cp->instance < 1 || cp->instance > hdev->le_num_of_adv_sets)
Signature · 1 line
2.30.2
author maintainer
#116 lore raw

PATCH 116/236 arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit a5200e63af57d05ed8bf0ffd9a6ffefc40e01e89 ]

Some EtherAVB variants support internal clock delay configuration, which can add larger delays than the delays that are typically supported by the PHY (using an "rgmii-*id" PHY mode, and/or "[rt]xc-skew-ps" properties).

Historically, the EtherAVB driver configured these delays based on the "rgmii-*id" PHY mode. This was wrong, as these are meant solely for the PHY, not for the MAC. Hence properties were introduced for explicit configuration of these delays.

Convert the RZ/G2 DTS files from the old to the new scheme:
- Add default "rx-internal-delay-ps" and "tx-internal-delay-ps" properties to the SoC .dtsi files, to be overridden by board files where needed,
- Convert board files from "rgmii-*id" PHY modes to "rgmii", adding the appropriate "rx-internal-delay-ps" and/or "tx-internal-delay-ps" overrides.

Notes:
- RZ/G2E does not support TX internal delay handling.

---
 arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi | 3 ++-
 arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi     | 2 +-
 arch/arm64/boot/dts/renesas/r8a774a1.dtsi           | 2 ++
 arch/arm64/boot/dts/renesas/r8a774b1.dtsi           | 2 ++
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi           | 1 +
 arch/arm64/boot/dts/renesas/r8a774e1.dtsi           | 2 ++
 6 files changed, 10 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi +2 -1
index e3773b05c403..3c73dfc430af 100644
@@ -55,7 +55,8 @@
 	pinctrl-0 = <&avb_pins>;
 	pinctrl-names = "default";
 	phy-handle = <&phy0>;
-	phy-mode = "rgmii-id";
+	rx-internal-delay-ps = <1800>;
+	tx-internal-delay-ps = <2000>;
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi +1 -1
index b9e46aed5336..202c4fc88bd5 100644
@@ -19,7 +19,7 @@
 	pinctrl-0 = <&avb_pins>;
 	pinctrl-names = "default";
 	phy-handle = <&phy0>;
-	phy-mode = "rgmii-txid";
+	tx-internal-delay-ps = <2000>;
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
arch/arm64/boot/dts/renesas/r8a774a1.dtsi +2 -0
index c58a0846db50..a5ebe574fbac 100644
@@ -1131,6 +1131,8 @@
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds0 16>;
 			#address-cells = <1>;
 			#size-cells = <0>;
arch/arm64/boot/dts/renesas/r8a774b1.dtsi +2 -0
index 9ebf6e58ba31..20003a41a706 100644
@@ -1004,6 +1004,8 @@
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds0 16>;
 			#address-cells = <1>;
 			#size-cells = <0>;
arch/arm64/boot/dts/renesas/r8a774c0.dtsi +1 -0
index f27d9b2eb996..e0e54342cd4c 100644
@@ -960,6 +960,7 @@
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds0 16>;
 			#address-cells = <1>;
 			#size-cells = <0>;
arch/arm64/boot/dts/renesas/r8a774e1.dtsi +2 -0
index 708258696b4f..2e6c12a46daf 100644
@@ -1233,6 +1233,8 @@
 			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds0 16>;
 			#address-cells = <1>;
 			#size-cells = <0>;
Signature · 1 line
2.30.2
author maintainer
#99 lore raw

PATCH 99/236 media: atomisp: fix the uninitialized use and rename "retvalue"

In reply to Greg Kroah-Hartman

From: Yizhuo <[email protected]>

[ Upstream commit c275e5d349b0d2b1143607d28b9c7c14a8a0a9b4 ]

Inside function mt9m114_detect(), variable "retvalue" could be uninitialized if mt9m114_read_reg() returns error, however, it is used in the later if statement, which is potentially unsafe.

The local variable "retvalue" is renamed to "model" to avoid confusion.

Fixes ad85094 (media / atomisp: fix the uninitialized use of model ID)
---
 drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c +7 -4
index f5de81132177..77293579a134 100644
@@ -1533,16 +1533,19 @@ static struct v4l2_ctrl_config mt9m114_controls[] = {
 static int mt9m114_detect(struct mt9m114_device *dev, struct i2c_client *client)
 {
 	struct i2c_adapter *adapter = client->adapter;
-	u32 retvalue;
+	u32 model;
+	int ret;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
 		dev_err(&client->dev, "%s: i2c error", __func__);
 		return -ENODEV;
 	}
-	mt9m114_read_reg(client, MISENSOR_16BIT, (u32)MT9M114_PID, &retvalue);
-	dev->real_model_id = retvalue;
+	ret = mt9m114_read_reg(client, MISENSOR_16BIT, MT9M114_PID, &model);
+	if (ret)
+		return ret;
+	dev->real_model_id = model;
 
-	if (retvalue != MT9M114_MOD_ID) {
+	if (model != MT9M114_MOD_ID) {
 		dev_err(&client->dev, "%s: failed: client->addr = %x\n",
 			__func__, client->addr);
 		return -ENODEV;
Signature · 1 line
2.30.2
author maintainer
#119 lore raw

PATCH 119/236 net/mlx5: Fix missing return value in mlx5_devlink_eswitch_inline_mode_set()

In reply to Greg Kroah-Hartman

From: Jiapeng Chong <[email protected]>

[ Upstream commit bcd68c04c7692416206414dc8971730aa140eba7 ]

The return value is missing in this code scenario, add the return value '0' to the return value 'err'.

Eliminate the follow smatch warning:

drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c:3083 mlx5_devlink_eswitch_inline_mode_set() warn: missing error code 'err'.

Fixes 8e0aa4bc959c ("net/mlx5: E-switch, Protect eswitch mode changes")
---
 drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +4 -1
index c9c2962ad49f..5801f55ff077 100644
@@ -2564,8 +2564,11 @@ int mlx5_devlink_eswitch_inline_mode_set(struct devlink *devlink, u8 mode,
 
 	switch (MLX5_CAP_ETH(dev, wqe_inline_mode)) {
 	case MLX5_CAP_INLINE_MODE_NOT_REQUIRED:
-		if (mode == DEVLINK_ESWITCH_INLINE_MODE_NONE)
+		if (mode == DEVLINK_ESWITCH_INLINE_MODE_NONE) {
+			err = 0;
 			goto out;
+		}
+
 		fallthrough;
 	case MLX5_CAP_INLINE_MODE_L2:
 		NL_SET_ERR_MSG_MOD(extack, "Inline mode can't be set");
Signature · 1 line
2.30.2
author maintainer
#118 lore raw

PATCH 118/236 devlink: Break parameter notification sequence to be before/after unload/load driver

In reply to Greg Kroah-Hartman

From: Leon Romanovsky <[email protected]>

[ Upstream commit 05a7f4a8dff19999ca8a83a35ff4782689de7bfc ]

The change of namespaces during devlink reload calls to driver unload before it accesses devlink parameters. The commands below causes to use-after-free bug when trying to get flow steering mode.

* ip netns add n1
* devlink dev reload pci/0000:00:09.0 netns n1

==================================================================

 BUG: KASAN: use-after-free in mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
 Read of size 4 at addr ffff888009d04308 by task devlink/275

 CPU: 6 PID: 275 Comm: devlink Not tainted 5.12.0-rc2+ #2853
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 Call Trace:
  dump_stack+0x93/0xc2
  print_address_description.constprop.0+0x18/0x140
  ? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
  ? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
  kasan_report.cold+0x7c/0xd8
  ? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
  mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
  devlink_nl_param_fill+0x1c8/0xe80
  ? __free_pages_ok+0x37a/0x8a0
  ? devlink_flash_update_timeout_notify+0xd0/0xd0
  ? lock_acquire+0x1a9/0x6d0
  ? fs_reclaim_acquire+0xb7/0x160
  ? lock_is_held_type+0x98/0x110
  ? 0xffffffff81000000
  ? lock_release+0x1f9/0x6c0
  ? fs_reclaim_release+0xa1/0xf0
  ? lock_downgrade+0x6d0/0x6d0
  ? lock_is_held_type+0x98/0x110
  ? lock_is_held_type+0x98/0x110
  ? memset+0x20/0x40
  ? __build_skb_around+0x1f8/0x2b0
  devlink_param_notify+0x6d/0x180
  devlink_reload+0x1c3/0x520
  ? devlink_remote_reload_actions_performed+0x30/0x30
  ? mutex_trylock+0x24b/0x2d0
  ? devlink_nl_cmd_reload+0x62b/0x1070
  devlink_nl_cmd_reload+0x66d/0x1070
  ? devlink_reload+0x520/0x520
  ? devlink_get_from_attrs+0x1bc/0x260
  ? devlink_nl_pre_doit+0x64/0x4d0
  genl_family_rcv_msg_doit+0x1e9/0x2f0
  ? mutex_lock_io_nested+0x1130/0x1130
  ? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240
  ? security_capable+0x51/0x90
  genl_rcv_msg+0x27f/0x4a0
  ? genl_get_cmd+0x3c0/0x3c0
  ? lock_acquire+0x1a9/0x6d0
  ? devlink_reload+0x520/0x520
  ? lock_release+0x6c0/0x6c0
  netlink_rcv_skb+0x11d/0x340
  ? genl_get_cmd+0x3c0/0x3c0
  ? netlink_ack+0x9f0/0x9f0
  ? lock_release+0x1f9/0x6c0
  genl_rcv+0x24/0x40
  netlink_unicast+0x433/0x700
  ? netlink_attachskb+0x730/0x730
  ? _copy_from_iter_full+0x178/0x650
  ? __alloc_skb+0x113/0x2b0
  netlink_sendmsg+0x6f1/0xbd0
  ? netlink_unicast+0x700/0x700
  ? lock_is_held_type+0x98/0x110
  ? netlink_unicast+0x700/0x700
  sock_sendmsg+0xb0/0xe0
  __sys_sendto+0x193/0x240
  ? __x64_sys_getpeername+0xb0/0xb0
  ? do_sys_openat2+0x10b/0x370
  ? __up_read+0x1a1/0x7b0
  ? do_user_addr_fault+0x219/0xdc0
  ? __x64_sys_openat+0x120/0x1d0
  ? __x64_sys_open+0x1a0/0x1a0
  __x64_sys_sendto+0xdd/0x1b0
  ? syscall_enter_from_user_mode+0x1d/0x50
  do_syscall_64+0x2d/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7fc69d0af14a
 Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c
 RSP: 002b:00007ffc1d8292f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fc69d0af14a
 RDX: 0000000000000038 RSI: 0000555f57c56440 RDI: 0000000000000003
 RBP: 0000555f57c56410 R08: 00007fc69d17b200 R09: 000000000000000c
 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

 Allocated by task 146:
  kasan_save_stack+0x1b/0x40
  __kasan_kmalloc+0x99/0xc0
  mlx5_init_fs+0xf0/0x1c50 [mlx5_core]
  mlx5_load+0xd2/0x180 [mlx5_core]
  mlx5_init_one+0x2f6/0x450 [mlx5_core]
  probe_one+0x47d/0x6e0 [mlx5_core]
  pci_device_probe+0x2a0/0x4a0
  really_probe+0x20a/0xc90
  driver_probe_device+0xd8/0x380
  device_driver_attach+0x1df/0x250
  __driver_attach+0xff/0x240
  bus_for_each_dev+0x11e/0x1a0
  bus_add_driver+0x309/0x570
  driver_register+0x1ee/0x380
  0xffffffffa06b8062
  do_one_initcall+0xd5/0x410
  do_init_module+0x1c8/0x760
  load_module+0x6d8b/0x9650
  __do_sys_finit_module+0x118/0x1b0
  do_syscall_64+0x2d/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xae

 Freed by task 275:
  kasan_save_stack+0x1b/0x40
  kasan_set_track+0x1c/0x30
  kasan_set_free_info+0x20/0x30
  __kasan_slab_free+0x102/0x140
  slab_free_freelist_hook+0x74/0x1b0
  kfree+0xd7/0x2a0
  mlx5_unload+0x16/0xb0 [mlx5_core]
  mlx5_unload_one+0xae/0x120 [mlx5_core]
  mlx5_devlink_reload_down+0x1bc/0x380 [mlx5_core]
  devlink_reload+0x141/0x520
  devlink_nl_cmd_reload+0x66d/0x1070
  genl_family_rcv_msg_doit+0x1e9/0x2f0
  genl_rcv_msg+0x27f/0x4a0
  netlink_rcv_skb+0x11d/0x340
  genl_rcv+0x24/0x40
  netlink_unicast+0x433/0x700
  netlink_sendmsg+0x6f1/0xbd0
  sock_sendmsg+0xb0/0xe0
  __sys_sendto+0x193/0x240
  __x64_sys_sendto+0xdd/0x1b0
  do_syscall_64+0x2d/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xae

 The buggy address belongs to the object at ffff888009d04300
  which belongs to the cache kmalloc-128 of size 128
 The buggy address is located 8 bytes inside of
  128-byte region [ffff888009d04300, ffff888009d04380)
 The buggy address belongs to the page:
 page:0000000086a64ecc refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888009d04000 pfn:0x9d04
 head:0000000086a64ecc order:1 compound_mapcount:0
 flags: 0x4000000000010200(slab|head)
 raw: 4000000000010200 ffffea0000203980 0000000200000002 ffff8880050428c0
 raw: ffff888009d04000 000000008020001d 00000001ffffffff 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  ffff888009d04200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff888009d04280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 >ffff888009d04300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                       ^
  ffff888009d04380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffff888009d04400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ==================================================================

The right solution to devlink reload is to notify about deletion of parameters, unload driver, change net namespaces, load driver and notify about addition of parameters.

Fixes 070c63f20f6c ("net: devlink: allow to change namespaces during reload")
---
 net/core/devlink.c | 32 ++++++++++++++++++++------------
 1 file changed, 20 insertions(+), 12 deletions(-)
net/core/devlink.c +20 -12
index 90badb6f7227..6cc8c64ed62a 100644
@@ -3079,10 +3079,12 @@ static void devlink_param_notify(struct devlink *devlink,
 				 struct devlink_param_item *param_item,
 				 enum devlink_command cmd);
 
-static void devlink_reload_netns_change(struct devlink *devlink,
-					struct net *dest_net)
+static void devlink_ns_change_notify(struct devlink *devlink,
+				     struct net *dest_net, struct net *curr_net,
+				     bool new)
 {
 	struct devlink_param_item *param_item;
+	enum devlink_command cmd;
 
 	/* Userspace needs to be notified about devlink objects
 	 * removed from original and entering new network namespace.
@@ -3090,17 +3092,18 @@ static void devlink_reload_netns_change(struct devlink *devlink,
 	 * reload process so the notifications are generated separatelly.
 	 */
 
-	list_for_each_entry(param_item, &devlink->param_list, list)
-		devlink_param_notify(devlink, 0, param_item,
-				     DEVLINK_CMD_PARAM_DEL);
-	devlink_notify(devlink, DEVLINK_CMD_DEL);
+	if (!dest_net || net_eq(dest_net, curr_net))
+		return;
 
-	__devlink_net_set(devlink, dest_net);
+	if (new)
+		devlink_notify(devlink, DEVLINK_CMD_NEW);
 
-	devlink_notify(devlink, DEVLINK_CMD_NEW);
+	cmd = new ? DEVLINK_CMD_PARAM_NEW : DEVLINK_CMD_PARAM_DEL;
 	list_for_each_entry(param_item, &devlink->param_list, list)
-		devlink_param_notify(devlink, 0, param_item,
-				     DEVLINK_CMD_PARAM_NEW);
+		devlink_param_notify(devlink, 0, param_item, cmd);
+
+	if (!new)
+		devlink_notify(devlink, DEVLINK_CMD_DEL);
 }
 
 static bool devlink_reload_supported(const struct devlink_ops *ops)
@@ -3180,6 +3183,7 @@ static int devlink_reload(struct devlink *devlink, struct net *dest_net,
 			  u32 *actions_performed, struct netlink_ext_ack *extack)
 {
 	u32 remote_reload_stats[DEVLINK_RELOAD_STATS_ARRAY_SIZE];
+	struct net *curr_net;
 	int err;
 
 	if (!devlink->reload_enabled)
@@ -3187,18 +3191,22 @@ static int devlink_reload(struct devlink *devlink, struct net *dest_net,
 
 	memcpy(remote_reload_stats, devlink->stats.remote_reload_stats,
 	       sizeof(remote_reload_stats));
+
+	curr_net = devlink_net(devlink);
+	devlink_ns_change_notify(devlink, dest_net, curr_net, false);
 	err = devlink->ops->reload_down(devlink, !!dest_net, action, limit, extack);
 	if (err)
 		return err;
 
-	if (dest_net && !net_eq(dest_net, devlink_net(devlink)))
-		devlink_reload_netns_change(devlink, dest_net);
+	if (dest_net && !net_eq(dest_net, curr_net))
+		__devlink_net_set(devlink, dest_net);
 
 	err = devlink->ops->reload_up(devlink, action, limit, actions_performed, extack);
 	devlink_reload_failed_set(devlink, !!err);
 	if (err)
 		return err;
 
+	devlink_ns_change_notify(devlink, dest_net, curr_net, true);
 	WARN_ON(!(*actions_performed & BIT(action)));
 	/* Catch driver on updating the remote action within devlink reload */
 	WARN_ON(memcmp(remote_reload_stats, devlink->stats.remote_reload_stats,
Signature · 1 line
2.30.2
author maintainer
#117 lore raw

PATCH 117/236 arm64: dts: renesas: hihope-rzg2-ex: Add EtherAVB internal rx delay

In reply to Greg Kroah-Hartman

From: Biju Das <[email protected]>

[ Upstream commit c96ca5604a889a142d6b60889cc6da48498806e9 ]

Hihope boards use Realtek PHY. From the very beginning it use only tx delays. However the phy driver commit bbc4d71d63549bcd003 ("net: phy: realtek: fix rtl8211e rx/tx delay config") introduced NFS mount failure. Now it needs rx delay inaddition to tx delay for NFS mount to work. This patch fixes NFS mount failure issue by adding MAC internal rx delay.

Fixes bbc4d71d63549bcd ("net: phy: realtek: fix rtl8211e rx/tx delay config")
---
 arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi +1 -0
index 202c4fc88bd5..dde3a07bc417 100644
@@ -20,6 +20,7 @@
 	pinctrl-names = "default";
 	phy-handle = <&phy0>;
 	tx-internal-delay-ps = <2000>;
+	rx-internal-delay-ps = <1800>;
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
Signature · 1 line
2.30.2
author maintainer
#121 lore raw

PATCH 121/236 leds: lt3593: Put fwnode in any case during ->probe()

In reply to Greg Kroah-Hartman

From: Andy Shevchenko <[email protected]>

[ Upstream commit 7e1baaaa2407a642ea19b58e214fab9a69cda1d7 ]

device_get_next_child_node() bumps a reference counting of a returned variable. We have to balance it whenever we return to the caller.

Fixes 8cd7d6daba93 ("leds: lt3593: Add device tree probing glue")
Cc Daniel Mack <[email protected]>
---
 drivers/leds/leds-lt3593.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/leds/leds-lt3593.c +2 -3
index 68e06434ac08..7dab08773a34 100644
@@ -99,10 +99,9 @@ static int lt3593_led_probe(struct platform_device *pdev)
 	init_data.default_label = ":";
 
 	ret = devm_led_classdev_register_ext(dev, &led_data->cdev, &init_data);
-	if (ret < 0) {
-		fwnode_handle_put(child);
+	fwnode_handle_put(child);
+	if (ret < 0)
 		return ret;
-	}
 
 	platform_set_drvdata(pdev, led_data);
 
Signature · 1 line
2.30.2
author maintainer
#120 lore raw

PATCH 120/236 i2c: highlander: add IRQ check

In reply to Greg Kroah-Hartman

From: Sergey Shtylyov <[email protected]>

[ Upstream commit f16a3bb69aa6baabf8f0aca982c8cf21e2a4f6bc ]

The driver is written as if platform_get_irq() returns 0 on errors (while actually it returns a negative error code), blithely passing these error codes to request_irq() (which takes *unsigned* IRQ #) -- which fails with -EINVAL. Add the necessary error check to the pre-existing *if* statement forcing the driver into the polling mode...

Fixes 4ad48e6ab18c ("i2c: Renesas Highlander FPGA SMBus support")
---
 drivers/i2c/busses/i2c-highlander.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/i2c/busses/i2c-highlander.c +1 -1
index 803dad70e2a7..a2add128d084 100644
@@ -379,7 +379,7 @@ static int highlander_i2c_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, dev);
 
 	dev->irq = platform_get_irq(pdev, 0);
-	if (iic_force_poll)
+	if (dev->irq < 0 || iic_force_poll)
 		dev->irq = 0;
 
 	if (dev->irq) {
Signature · 1 line
2.30.2
author maintainer
#122 lore raw

PATCH 122/236 leds: trigger: audio: Add an activate callback to ensure the initial brightness is set

In reply to Greg Kroah-Hartman

From: Hans de Goede <[email protected]>

[ Upstream commit 64f67b5240db79eceb0bd57dae8e591fd3103ba0 ]

Some 2-in-1s with a detachable (USB) keyboard(dock) have mute-LEDs in the speaker- and/or mic-mute keys on the keyboard.

Examples of this are the Lenovo Thinkpad10 tablet (with its USB kbd-dock) and the HP x2 10 series.

The detachable nature of these keyboards means that the keyboard and thus the mute LEDs may show up after the user (or userspace restoring old mixer settings) has muted the speaker and/or mic.

Current LED-class devices with a default_trigger of "audio-mute" or "audio-micmute" initialize the brightness member of led_classdev with ledtrig_audio_get() before registering the LED.

This makes the software state after attaching the keyboard match the actual audio mute state, e.g. cat /sys/class/leds/foo/brightness will show the right value.

But before this commit nothing was actually calling the led_classdev's brightness_set[_blocking] callback so the value returned by ledtrig_audio_get() was never actually being sent to the hw, leading to the mute LEDs staying in their default power-on state, after attaching the keyboard, even if ledtrig_audio_get() returned a different state.

This could be fixed by having the individual LED drivers call brightness_set[_blocking] themselves after registering the LED, but this really is something which should be done by a led-trigger activate callback.

Add an activate callback for this, fixing the issue of the mute LEDs being out of sync after (re)attaching the keyboard.

Cc Takashi Iwai <[email protected]>
Fixes faa2541f5b1a ("leds: trigger: Introduce audio mute LED trigger")
---
 drivers/leds/trigger/ledtrig-audio.c | 37 ++++++++++++++++++++++------
 1 file changed, 29 insertions(+), 8 deletions(-)
drivers/leds/trigger/ledtrig-audio.c +29 -8
index f76621e88482..c6b437e6369b 100644
@@ -6,10 +6,33 @@
 #include <linux/kernel.h>
 #include <linux/leds.h>
 #include <linux/module.h>
+#include "../leds.h"
 
-static struct led_trigger *ledtrig_audio[NUM_AUDIO_LEDS];
 static enum led_brightness audio_state[NUM_AUDIO_LEDS];
 
+static int ledtrig_audio_mute_activate(struct led_classdev *led_cdev)
+{
+	led_set_brightness_nosleep(led_cdev, audio_state[LED_AUDIO_MUTE]);
+	return 0;
+}
+
+static int ledtrig_audio_micmute_activate(struct led_classdev *led_cdev)
+{
+	led_set_brightness_nosleep(led_cdev, audio_state[LED_AUDIO_MICMUTE]);
+	return 0;
+}
+
+static struct led_trigger ledtrig_audio[NUM_AUDIO_LEDS] = {
+	[LED_AUDIO_MUTE] = {
+		.name     = "audio-mute",
+		.activate = ledtrig_audio_mute_activate,
+	},
+	[LED_AUDIO_MICMUTE] = {
+		.name     = "audio-micmute",
+		.activate = ledtrig_audio_micmute_activate,
+	},
+};
+
 enum led_brightness ledtrig_audio_get(enum led_audio type)
 {
 	return audio_state[type];
@@ -19,24 +42,22 @@ EXPORT_SYMBOL_GPL(ledtrig_audio_get);
 void ledtrig_audio_set(enum led_audio type, enum led_brightness state)
 {
 	audio_state[type] = state;
-	led_trigger_event(ledtrig_audio[type], state);
+	led_trigger_event(&ledtrig_audio[type], state);
 }
 EXPORT_SYMBOL_GPL(ledtrig_audio_set);
 
 static int __init ledtrig_audio_init(void)
 {
-	led_trigger_register_simple("audio-mute",
-				    &ledtrig_audio[LED_AUDIO_MUTE]);
-	led_trigger_register_simple("audio-micmute",
-				    &ledtrig_audio[LED_AUDIO_MICMUTE]);
+	led_trigger_register(&ledtrig_audio[LED_AUDIO_MUTE]);
+	led_trigger_register(&ledtrig_audio[LED_AUDIO_MICMUTE]);
 	return 0;
 }
 module_init(ledtrig_audio_init);
 
 static void __exit ledtrig_audio_exit(void)
 {
-	led_trigger_unregister_simple(ledtrig_audio[LED_AUDIO_MUTE]);
-	led_trigger_unregister_simple(ledtrig_audio[LED_AUDIO_MICMUTE]);
+	led_trigger_unregister(&ledtrig_audio[LED_AUDIO_MUTE]);
+	led_trigger_unregister(&ledtrig_audio[LED_AUDIO_MICMUTE]);
 }
 module_exit(ledtrig_audio_exit);
 
Signature · 1 line
2.30.2
author maintainer
#100 lore raw

PATCH 100/236 Bluetooth: sco: prevent information leak in sco_conn_defer_accept()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 59da0b38bc2ea570ede23a3332ecb3e7574ce6b2 ]

Smatch complains that some of these struct members are not initialized leading to a stack information disclosure:

net/bluetooth/sco.c:778 sco_conn_defer_accept() warn:
check that 'cp.retrans_effort' doesn't leak information

This seems like a valid warning. I've added a default case to fix this issue.

Fixes 2f69a82acf6f ("Bluetooth: Use voice setting in deferred SCO connection request")
---
 net/bluetooth/sco.c | 5 +++++
 1 file changed, 5 insertions(+)
net/bluetooth/sco.c +5 -0
index 22a110f37abc..8ae8af33ae91 100644
@@ -773,6 +773,11 @@ static void sco_conn_defer_accept(struct hci_conn *conn, u16 setting)
 			cp.max_latency = cpu_to_le16(0xffff);
 			cp.retrans_effort = 0xff;
 			break;
+		default:
+			/* use CVSD settings as fallback */
+			cp.max_latency = cpu_to_le16(0xffff);
+			cp.retrans_effort = 0xff;
+			break;
 		}
 
 		hci_send_cmd(hdev, HCI_OP_ACCEPT_SYNC_CONN_REQ,
Signature · 1 line
2.30.2
author maintainer
#123 lore raw

PATCH 123/236 media: em28xx-input: fix refcount bug in em28xx_usb_disconnect

In reply to Greg Kroah-Hartman

From: Dongliang Mu <[email protected]>

[ Upstream commit 6fa54bc713c262e1cfbc5613377ef52280d7311f ]

If em28xx_ir_init fails, it would decrease the refcount of dev. However, in the em28xx_ir_fini, when ir is NULL, it goes to ref_put and decrease the refcount of dev. This will lead to a refcount bug.

Fix this bug by removing the kref_put in the error handling code of em28xx_ir_init.

refcount_t: underflow; use-after-free.

WARNING: CPU: 0 PID: 7 at lib/refcount.c:28 refcount_warn_saturate+0x18e/0x1a0 lib/refcount.c:28
Modules linked in:
CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.13.0 #3
Workqueue: usb_hub_wq hub_event
RIP: 0010:refcount_warn_saturate+0x18e/0x1a0 lib/refcount.c:28
Call Trace:
  kref_put.constprop.0+0x60/0x85 include/linux/kref.h:69
  em28xx_usb_disconnect.cold+0xd7/0xdc drivers/media/usb/em28xx/em28xx-cards.c:4150
  usb_unbind_interface+0xbf/0x3a0 drivers/usb/core/driver.c:458
  __device_release_driver drivers/base/dd.c:1201 [inline]
  device_release_driver_internal+0x22a/0x230 drivers/base/dd.c:1232
  bus_remove_device+0x108/0x160 drivers/base/bus.c:529
  device_del+0x1fe/0x510 drivers/base/core.c:3540
  usb_disable_device+0xd1/0x1d0 drivers/usb/core/message.c:1419
  usb_disconnect+0x109/0x330 drivers/usb/core/hub.c:2221
  hub_port_connect drivers/usb/core/hub.c:5151 [inline]
  hub_port_connect_change drivers/usb/core/hub.c:5440 [inline]
  port_event drivers/usb/core/hub.c:5586 [inline]
  hub_event+0xf81/0x1d40 drivers/usb/core/hub.c:5668
  process_one_work+0x2c9/0x610 kernel/workqueue.c:2276
  process_scheduled_works kernel/workqueue.c:2338 [inline]
  worker_thread+0x333/0x5b0 kernel/workqueue.c:2424
  kthread+0x188/0x1d0 kernel/kthread.c:319
  ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
Fixes ac5688637144 ("media: em28xx: Fix possible memory leak of em28xx struct")
---
 drivers/media/usb/em28xx/em28xx-input.c | 1 -
 1 file changed, 1 deletion(-)
drivers/media/usb/em28xx/em28xx-input.c +0 -1
index 59529cbf9cd0..0b6d77c3bec8 100644
@@ -842,7 +842,6 @@ error:
 	kfree(ir);
 ref_put:
 	em28xx_shutdown_buttons(dev);
-	kref_put(&dev->ref, em28xx_free_device);
 	return err;
 }
 
Signature · 1 line
2.30.2
author maintainer
#124 lore raw

PATCH 124/236 media: venus: venc: Fix potential null pointer dereference on pointer fmt

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit 09ea9719a423fc675d40dd05407165e161ea0c48 ]

Currently the call to find_format can potentially return a NULL to fmt and the nullpointer is later dereferenced on the assignment of pixmp->num_planes = fmt->num_planes. Fix this by adding a NULL pointer check and returning NULL for the failure case.

Addresses-Coverity: ("Dereference null return")

Fixes aaaa93eda64b ("[media] media: venus: venc: add video encoder files")
---
 drivers/media/platform/qcom/venus/venc.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/media/platform/qcom/venus/venc.c +2 -0
index 47246528ac7e..e2d0fd5eaf29 100644
@@ -183,6 +183,8 @@ venc_try_fmt_common(struct venus_inst *inst, struct v4l2_format *f)
 		else
 			return NULL;
 		fmt = find_format(inst, pixmp->pixelformat, f->type);
+		if (!fmt)
+			return NULL;
 	}
 
 	pixmp->width = clamp(pixmp->width, frame_width_min(inst),
Signature · 1 line
2.30.2
author maintainer
#125 lore raw

PATCH 125/236 PCI: PM: Avoid forcing PCI_D0 for wakeup reasons inconsistently

In reply to Greg Kroah-Hartman

From: Rafael J. Wysocki <[email protected]>

[ Upstream commit da9f2150684ea684a7ddd6d7f0e38b2bdf43dcd8 ]

It is inconsistent to return PCI_D0 from pci_target_state() instead of the original target state if 'wakeup' is true and the device cannot signal PME from D0.

This only happens when the device cannot signal PME from the original target state and any shallower power states (including D0) and that case is effectively equivalent to the one in which PME singaling is not supported at all. Since the original target state is returned in the latter case, make the function do that in the former one too.

---
 drivers/pci/pci.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)
drivers/pci/pci.c +10 -6
index 9e971fffeb6a..d864f964bcae 100644
@@ -2573,16 +2573,20 @@ static pci_power_t pci_target_state(struct pci_dev *dev, bool wakeup)
 	if (dev->current_state == PCI_D3cold)
 		target_state = PCI_D3cold;
 
-	if (wakeup) {
+	if (wakeup && dev->pme_support) {
+		pci_power_t state = target_state;
+
 		/*
 		 * Find the deepest state from which the device can generate
 		 * PME#.
 		 */
-		if (dev->pme_support) {
-			while (target_state
-			      && !(dev->pme_support & (1 << target_state)))
-				target_state--;
-		}
+		while (state && !(dev->pme_support & (1 << state)))
+			state--;
+
+		if (state)
+			return state;
+		else if (dev->pme_support & 1)
+			return PCI_D0;
 	}
 
 	return target_state;
Signature · 1 line
2.30.2
author maintainer
#126 lore raw

PATCH 126/236 PCI: PM: Enable PME if it can be signaled from D3cold

In reply to Greg Kroah-Hartman

From: Rafael J. Wysocki <[email protected]>

[ Upstream commit 0e00392a895c95c6d12d42158236c8862a2f43f2 ]

PME signaling is only enabled by __pci_enable_wake() if the target device can signal PME from the given target power state (to avoid pointless reconfiguration of the device), but if the hierarchy above the device goes into D3cold, the device itself will end up in D3cold too, so if it can signal PME from D3cold, it should be enabled to do so in __pci_enable_wake().

[Note that if the device does not end up in D3cold and it cannot
signal PME from the original target power state, it will not signal PME, so in that case the behavior does not change.]

---
 drivers/pci/pci.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/pci/pci.c +8 -1
index d864f964bcae..29f5d699fa06 100644
@@ -2469,7 +2469,14 @@ static int __pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable
 	if (enable) {
 		int error;
 
-		if (pci_pme_capable(dev, state))
+		/*
+		 * Enable PME signaling if the device can signal PME from
+		 * D3cold regardless of whether or not it can signal PME from
+		 * the current target state, because that will allow it to
+		 * signal PME when the hierarchy above it goes into D3cold and
+		 * the device itself ends up in D3cold as a result of that.
+		 */
+		if (pci_pme_capable(dev, state) || pci_pme_capable(dev, PCI_D3cold))
 			pci_pme_active(dev, true);
 		else
 			ret = 1;
Signature · 1 line
2.30.2
author maintainer
#127 lore raw

PATCH 127/236 bpf, samples: Add missing mprog-disable to xdp_redirect_cpus optstring

In reply to Greg Kroah-Hartman

From: Matthew Cover <[email protected]>

[ Upstream commit 34ad6d9d8c27293e1895b448af7d6cf5d351ad8d ]

Commit ce4dade7f12a ("samples/bpf: xdp_redirect_cpu: Load a eBPF program on cpumap") added the following option, but missed adding it to optstring:

- mprog-disable: disable loading XDP program on cpumap entries

Fix it and add the missing option character.

Fixes ce4dade7f12a ("samples/bpf: xdp_redirect_cpu: Load a eBPF program on cpumap")
---
 samples/bpf/xdp_redirect_cpu_user.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
samples/bpf/xdp_redirect_cpu_user.c +1 -1
index f78cb18319aa..16eb839e71f0 100644
@@ -837,7 +837,7 @@ int main(int argc, char **argv)
 	memset(cpu, 0, n_cpus * sizeof(int));
 
 	/* Parse commands line args */
-	while ((opt = getopt_long(argc, argv, "hSd:s:p:q:c:xzFf:e:r:m:",
+	while ((opt = getopt_long(argc, argv, "hSd:s:p:q:c:xzFf:e:r:m:n",
 				  long_options, &longindex)) != -1) {
 		switch (opt) {
 		case 'd':
Signature · 1 line
2.30.2
author maintainer
#128 lore raw

PATCH 128/236 soc: qcom: smsm: Fix missed interrupts if state changes while masked

In reply to Greg Kroah-Hartman

From: Stephan Gerhold <[email protected]>

[ Upstream commit e3d4571955050736bbf3eda0a9538a09d9fcfce8 ]

The SMSM driver detects interrupt edges by tracking the last state it has seen (and has triggered the interrupt handler for). This works fine, but only if the interrupt does not change state while masked.

For example, if an interrupt is unmasked while the state is HIGH, the stored last_value for that interrupt might still be LOW. Then, when the remote processor triggers smsm_intr() we assume that nothing has changed, even though the state might have changed from HIGH to LOW.

Attempt to fix this by checking the current remote state before unmasking an IRQ. Use atomic operations to avoid the interrupt handler from interfering with the unmask function.

This fixes modem crashes in some edge cases with the BAM-DMUX driver. Specifically, the BAM-DMUX interrupt handler is not called for the HIGH -> LOW smsm state transition if the BAM-DMUX driver is loaded (and therefore unmasks the interrupt) after the modem was already started:

qcom-q6v5-mss 4080000.remoteproc: fatal error received: a2_task.c:3188:
Assert FALSE failed: A2 DL PER deadlock timer expired waiting for Apps ACK

Fixes c97c4090ff72 ("soc: qcom: smsm: Add driver for Qualcomm SMSM")
---
 drivers/soc/qcom/smsm.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/soc/qcom/smsm.c +8 -3
index 70c3c90b997c..c428d0f78816 100644
@@ -109,7 +109,7 @@ struct smsm_entry {
 	DECLARE_BITMAP(irq_enabled, 32);
 	DECLARE_BITMAP(irq_rising, 32);
 	DECLARE_BITMAP(irq_falling, 32);
-	u32 last_value;
+	unsigned long last_value;
 
 	u32 *remote_state;
 	u32 *subscription;
@@ -204,8 +204,7 @@ static irqreturn_t smsm_intr(int irq, void *data)
 	u32 val;
 
 	val = readl(entry->remote_state);
-	changed = val ^ entry->last_value;
-	entry->last_value = val;
+	changed = val ^ xchg(&entry->last_value, val);
 
 	for_each_set_bit(i, entry->irq_enabled, 32) {
 		if (!(changed & BIT(i)))
@@ -266,6 +265,12 @@ static void smsm_unmask_irq(struct irq_data *irqd)
 	struct qcom_smsm *smsm = entry->smsm;
 	u32 val;
 
+	/* Make sure our last cached state is up-to-date */
+	if (readl(entry->remote_state) & BIT(irq))
+		set_bit(irq, &entry->last_value);
+	else
+		clear_bit(irq, &entry->last_value);
+
 	set_bit(irq, entry->irq_enabled);
 
 	if (entry->subscription) {
Signature · 1 line
2.30.2
author maintainer
#129 lore raw

PATCH 129/236 debugfs: Return error during {full/open}_proxy_open() on rmmod

In reply to Greg Kroah-Hartman

From: Sven Eckelmann <[email protected]>

[ Upstream commit 112cedc8e600b668688eb809bf11817adec58ddc ]

If a kernel module gets unloaded then it printed report about a leak before commit 275678e7a9be ("debugfs: Check module state before warning in {full/open}_proxy_open()"). An additional check was added in this commit to avoid this printing. But it was forgotten that the function must return an error in this case because it was not actually opened.

As result, the systems started to crash or to hang when a module was unloaded while something was trying to open a file.

Fixes 275678e7a9be ("debugfs: Check module state before warning in {full/open}_proxy_open()")
Cc Taehee Yoo <[email protected]>
---
 fs/debugfs/file.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
fs/debugfs/file.c +6 -2
index 686e0ad28788..3aa5eb9ce498 100644
@@ -179,8 +179,10 @@ static int open_proxy_open(struct inode *inode, struct file *filp)
 	if (!fops_get(real_fops)) {
 #ifdef CONFIG_MODULES
 		if (real_fops->owner &&
-		    real_fops->owner->state == MODULE_STATE_GOING)
+		    real_fops->owner->state == MODULE_STATE_GOING) {
+			r = -ENXIO;
 			goto out;
+		}
 #endif
 
 		/* Huh? Module did not clean up after itself at exit? */
@@ -314,8 +316,10 @@ static int full_proxy_open(struct inode *inode, struct file *filp)
 	if (!fops_get(real_fops)) {
 #ifdef CONFIG_MODULES
 		if (real_fops->owner &&
-		    real_fops->owner->state == MODULE_STATE_GOING)
+		    real_fops->owner->state == MODULE_STATE_GOING) {
+			r = -ENXIO;
 			goto out;
+		}
 #endif
 
 		/* Huh? Module did not cleanup after itself at exit? */
Signature · 1 line
2.30.2
author maintainer
#131 lore raw

PATCH 131/236 PM: EM: Increase energy calculation precision

In reply to Greg Kroah-Hartman

From: Lukasz Luba <[email protected]>

[ Upstream commit 7fcc17d0cb12938d2b3507973a6f93fc9ed2c7a1 ]

The Energy Model (EM) provides useful information about device power in each performance state to other subsystems like: Energy Aware Scheduler (EAS). The energy calculation in EAS does arithmetic operation based on the EM em_cpu_energy(). Current implementation of that function uses em_perf_state::cost as a pre-computed cost coefficient equal to:
cost = power * max_frequency / frequency.
The 'power' is expressed in milli-Watts (or in abstract scale).

There are corner cases when the EAS energy calculation for two Performance Domains (PDs) return the same value. The EAS compares these values to choose smaller one. It might happen that this values are equal due to rounding error. In such scenario, we need better resolution, e.g. 1000 times better. To provide this possibility increase the resolution in the em_perf_state::cost for 64-bit architectures. The cost of increasing resolution on 32-bit is pretty high (64-bit division) and is not justified since there are no new 32bit big.LITTLE EAS systems expected which would benefit from this higher resolution.

This patch allows to avoid the rounding to milli-Watt errors, which might occur in EAS energy estimation for each PD. The rounding error is common for small tasks which have small utilization value.

There are two places in the code where it makes a difference:
1. In the find_energy_efficient_cpu() where we are searching for best_delta. We might suffer there when two PDs return the same result, like in the example below.

Scenario:
Low utilized system e.g. ~200 sum_util for PD0 and ~220 for PD1. There are quite a few small tasks ~10-15 util. These tasks would suffer for the rounding error. These utilization values are typical when running games on Android. One of our partners has reported 5..10mA less battery drain when running with increased resolution.

Some details:
We have two PDs: PD0 (big) and PD1 (little)
Let's compare w/o patch set ('old') and w/ patch set ('new') We are comparing energy w/ task and w/o task placed in the PDs

a) 'old' w/o patch set, PD0
task_util = 13
cost = 480
sum_util_w/o_task = 215
sum_util_w_task = 228
scale_cpu = 1024
energy_w/o_task = 480 * 215 / 1024 = 100.78 => 100 energy_w_task = 480 * 228 / 1024 = 106.87 => 106 energy_diff = 106 - 100 = 6
(this is equal to 'old' PD1's energy_diff in 'c)')

b) 'new' w/ patch set, PD0
task_util = 13
cost = 480 * 1000 = 480000
sum_util_w/o_task = 215
sum_util_w_task = 228
energy_w/o_task = 480000 * 215 / 1024 = 100781 energy_w_task = 480000 * 228 / 1024 = 106875 energy_diff = 106875 - 100781 = 6094
(this is not equal to 'new' PD1's energy_diff in 'd)')

c) 'old' w/o patch set, PD1
task_util = 13
cost = 160
sum_util_w/o_task = 283
sum_util_w_task = 293
scale_cpu = 355
energy_w/o_task = 160 * 283 / 355 = 127.55 => 127 energy_w_task = 160 * 296 / 355 = 133.41 => 133 energy_diff = 133 - 127 = 6
(this is equal to 'old' PD0's energy_diff in 'a)')

d) 'new' w/ patch set, PD1
task_util = 13
cost = 160 * 1000 = 160000
sum_util_w/o_task = 283
sum_util_w_task = 293
scale_cpu = 355
energy_w/o_task = 160000 * 283 / 355 = 127549
energy_w_task = 160000 * 296 / 355 = 133408
energy_diff = 133408 - 127549 = 5859
(this is not equal to 'new' PD0's energy_diff in 'b)')

2. Difference in the 6% energy margin filter at the end of find_energy_efficient_cpu(). With this patch the margin comparison also has better resolution, so it's possible to have better task placement thanks to that.

Fixes 27871f7a8a341ef ("PM: Introduce an Energy Model management framework")
---
 include/linux/energy_model.h | 16 ++++++++++++++++
 kernel/power/energy_model.c  |  4 +++-
 2 files changed, 19 insertions(+), 1 deletion(-)
include/linux/energy_model.h +16 -0
index b67a51c574b9..5f04a2b35e80 100644
@@ -51,6 +51,22 @@ struct em_perf_domain {
 #ifdef CONFIG_ENERGY_MODEL
 #define EM_MAX_POWER 0xFFFF
 
+/*
+ * Increase resolution of energy estimation calculations for 64-bit
+ * architectures. The extra resolution improves decision made by EAS for the
+ * task placement when two Performance Domains might provide similar energy
+ * estimation values (w/o better resolution the values could be equal).
+ *
+ * We increase resolution only if we have enough bits to allow this increased
+ * resolution (i.e. 64-bit). The costs for increasing resolution when 32-bit
+ * are pretty high and the returns do not justify the increased costs.
+ */
+#ifdef CONFIG_64BIT
+#define em_scale_power(p) ((p) * 1000)
+#else
+#define em_scale_power(p) (p)
+#endif
+
 struct em_data_callback {
 	/**
 	 * active_power() - Provide power at the next performance state of
kernel/power/energy_model.c +3 -1
index 994ca8353543..be381eb6116a 100644
@@ -157,7 +157,9 @@ static int em_create_perf_table(struct device *dev, struct em_perf_domain *pd,
 	/* Compute the cost of each performance state. */
 	fmax = (u64) table[nr_states - 1].frequency;
 	for (i = 0; i < nr_states; i++) {
-		table[i].cost = div64_u64(fmax * table[i].power,
+		unsigned long power_res = em_scale_power(table[i].power);
+
+		table[i].cost = div64_u64(fmax * power_res,
 					  table[i].frequency);
 	}
 
Signature · 1 line
2.30.2
author maintainer
#130 lore raw

PATCH 130/236 Bluetooth: increase BTNAMSIZ to 21 chars to fix potential buffer overflow

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit 713baf3dae8f45dc8ada4ed2f5fdcbf94a5c274d ]

An earlier commit replaced using batostr to using %pMR sprintf for the construction of session->name. Static analysis detected that this new method can use a total of 21 characters (including the trailing '\0') so we need to increase the BTNAMSIZ from 18 to 21 to fix potential buffer overflows.

Addresses-Coverity: ("Out-of-bounds write")

Fixes fcb73338ed53 ("Bluetooth: Use %pMR in sprintf/seq_printf instead of batostr")
---
 net/bluetooth/cmtp/cmtp.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/bluetooth/cmtp/cmtp.h +1 -1
index c32638dddbf9..f6b9dc4e408f 100644
@@ -26,7 +26,7 @@
 #include <linux/types.h>
 #include <net/bluetooth/bluetooth.h>
 
-#define BTNAMSIZ 18
+#define BTNAMSIZ 21
 
 /* CMTP ioctl defines */
 #define CMTPCONNADD	_IOW('C', 200, int)
Signature · 1 line
2.30.2
author maintainer
#102 lore raw

PATCH 102/236 drm/amdgpu/acp: Make PM domain really work

In reply to Greg Kroah-Hartman

From: Kai-Heng Feng <[email protected]>

[ Upstream commit aff890288de2d818e4f83ec40c9315e2d735df07 ]

Devices created by mfd_add_hotplug_devices() don't really increase the index of its name, so get_mfd_cell_dev() cannot find any device, hence a NULL dev is passed to pm_genpd_add_device():

[   56.974926] (NULL device *): amdgpu: device acp_audio_dma.0.auto added to pm domain
[   56.974933] (NULL device *): amdgpu: Failed to add dev to genpd
[   56.974941] [drm:amdgpu_device_ip_init [amdgpu]] *ERROR* hw_init of IP block <acp_ip> failed -22
[   56.975810] amdgpu 0000:00:01.0: amdgpu: amdgpu_device_ip_init failed
[   56.975839] amdgpu 0000:00:01.0: amdgpu: Fatal error during GPU init
[   56.977136] ------------[ cut here ]------------
[   56.977143] kernel BUG at mm/slub.c:4206!
[   56.977158] invalid opcode: 0000 [#1] SMP NOPTI
[   56.977167] CPU: 1 PID: 1648 Comm: modprobe Not tainted 5.12.0-051200rc8-generic #202104182230
[   56.977175] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./FM2A68M-HD+, BIOS P5.20 02/13/2019
[   56.977180] RIP: 0010:kfree+0x3bf/0x410
[   56.977195] Code: 89 e7 48 d3 e2 f7 da e8 5f 0d 02 00 80 e7 02 75 3e 44 89 ee 4c 89 e7 e8 ef 5f fd ff e9 fa fe ff ff 49 8b 44 24 08 a8 01 75 b7 <0f> 0b 4c 8b 4d b0 48 8b 4d a8 48 89 da 4c 89 e6 41 b8 01 00 00 00
[   56.977202] RSP: 0018:ffffa48640ff79f0 EFLAGS: 00010246
[   56.977210] RAX: 0000000000000000 RBX: ffff9286127d5608 RCX: 0000000000000000
[   56.977215] RDX: 0000000000000000 RSI: ffffffffc099d0fb RDI: ffff9286127d5608
[   56.977220] RBP: ffffa48640ff7a48 R08: 0000000000000001 R09: 0000000000000001
[   56.977224] R10: 0000000000000000 R11: ffff9286087d8458 R12: fffff3ae0449f540
[   56.977229] R13: 0000000000000000 R14: dead000000000122 R15: dead000000000100
[   56.977234] FS:  00007f9de5929540(0000) GS:ffff928612e80000(0000) knlGS:0000000000000000
[   56.977240] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   56.977245] CR2: 00007f697dd97160 CR3: 00000001110f0000 CR4: 00000000001506e0
[   56.977251] Call Trace:
[   56.977261]  amdgpu_dm_encoder_destroy+0x1b/0x30 [amdgpu]
[   56.978056]  drm_mode_config_cleanup+0x4f/0x2e0 [drm]
[   56.978147]  ? kfree+0x3dd/0x410
[   56.978157]  ? drm_managed_release+0xc8/0x100 [drm]
[   56.978232]  drm_mode_config_init_release+0xe/0x10 [drm]
[   56.978311]  drm_managed_release+0x9d/0x100 [drm]
[   56.978388]  devm_drm_dev_init_release+0x4d/0x70 [drm]
[   56.978450]  devm_action_release+0x15/0x20
[   56.978459]  release_nodes+0x77/0xc0
[   56.978469]  devres_release_all+0x3f/0x50
[   56.978477]  really_probe+0x245/0x460
[   56.978485]  driver_probe_device+0xe9/0x160
[   56.978492]  device_driver_attach+0xab/0xb0
[   56.978499]  __driver_attach+0x8f/0x150
[   56.978506]  ? device_driver_attach+0xb0/0xb0
[   56.978513]  bus_for_each_dev+0x7e/0xc0
[   56.978521]  driver_attach+0x1e/0x20
[   56.978528]  bus_add_driver+0x135/0x1f0
[   56.978534]  driver_register+0x91/0xf0
[   56.978540]  __pci_register_driver+0x54/0x60
[   56.978549]  amdgpu_init+0x77/0x1000 [amdgpu]
[   56.979246]  ? 0xffffffffc0dbc000
[   56.979254]  do_one_initcall+0x48/0x1d0
[   56.979265]  ? kmem_cache_alloc_trace+0x120/0x230
[   56.979274]  ? do_init_module+0x28/0x280
[   56.979282]  do_init_module+0x62/0x280
[   56.979288]  load_module+0x71c/0x7a0
[   56.979296]  __do_sys_finit_module+0xc2/0x120
[   56.979305]  __x64_sys_finit_module+0x1a/0x20
[   56.979311]  do_syscall_64+0x38/0x90
[   56.979319]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   56.979328] RIP: 0033:0x7f9de54f989d
[   56.979335] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 f5 0c 00 f7 d8 64 89 01 48
[   56.979342] RSP: 002b:00007ffe3c395a28 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[   56.979350] RAX: ffffffffffffffda RBX: 0000560df3ef4330 RCX: 00007f9de54f989d
[   56.979355] RDX: 0000000000000000 RSI: 0000560df3a07358 RDI: 000000000000000f
[   56.979360] RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000000
[   56.979365] R10: 000000000000000f R11: 0000000000000246 R12: 0000560df3a07358
[   56.979369] R13: 0000000000000000 R14: 0000560df3ef4460 R15: 0000560df3ef4330
[   56.979377] Modules linked in: amdgpu(+) iommu_v2 gpu_sched drm_ttm_helper ttm drm_kms_helper cec rc_core i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt nft_counter xt_tcpudp ipt_REJECT nf_reject_ipv4 xt_conntrack iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_raw iptable_security ip_set nf_tables libcrc32c nfnetlink ip6_tables iptable_filter bpfilter input_leds binfmt_misc edac_mce_amd kvm_amd ccp kvm snd_hda_codec_realtek snd_hda_codec_generic crct10dif_pclmul snd_hda_codec_hdmi ledtrig_audio ghash_clmulni_intel aesni_intel snd_hda_intel snd_intel_dspcfg snd_seq_midi crypto_simd snd_intel_sdw_acpi cryptd snd_hda_codec snd_seq_midi_event snd_rawmidi snd_hda_core snd_hwdep snd_seq fam15h_power k10temp snd_pcm snd_seq_device snd_timer snd mac_hid soundcore sch_fq_codel nct6775 hwmon_vid drm ip_tables x_tables autofs4 dm_mirror dm_region_hash dm_log hid_generic usbhid hid uas usb_storage r8169 crc32_pclmul realtek ahci xhci_pci i2c_piix4
[   56.979521]  xhci_pci_renesas libahci video
[   56.979541] ---[ end trace cb8f6a346f18da7b ]---

Instead of finding MFD hotplugged device by its name, simply iterate over the child devices to avoid the issue.

Squash in unused variable removal (Alex)

Fixes 25030321ba28 ("drm/amd: add pm domain for ACP IP sub blocks")
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c | 54 ++++++++++++-------------
 1 file changed, 26 insertions(+), 28 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c +26 -28
index d3e51d361179..eb68b0f1da82 100644
@@ -160,17 +160,28 @@ static int acp_poweron(struct generic_pm_domain *genpd)
 	return 0;
 }
 
-static struct device *get_mfd_cell_dev(const char *device_name, int r)
+static int acp_genpd_add_device(struct device *dev, void *data)
 {
-	char auto_dev_name[25];
-	struct device *dev;
+	struct generic_pm_domain *gpd = data;
+	int ret;
 
-	snprintf(auto_dev_name, sizeof(auto_dev_name),
-		 "%s.%d.auto", device_name, r);
-	dev = bus_find_device_by_name(&platform_bus_type, NULL, auto_dev_name);
-	dev_info(dev, "device %s added to pm domain\n", auto_dev_name);
+	ret = pm_genpd_add_device(gpd, dev);
+	if (ret)
+		dev_err(dev, "Failed to add dev to genpd %d\n", ret);
 
-	return dev;
+	return ret;
+}
+
+static int acp_genpd_remove_device(struct device *dev, void *data)
+{
+	int ret;
+
+	ret = pm_genpd_remove_device(dev);
+	if (ret)
+		dev_err(dev, "Failed to remove dev from genpd %d\n", ret);
+
+	/* Continue to remove */
+	return 0;
 }
 
 /**
@@ -181,11 +192,10 @@ static struct device *get_mfd_cell_dev(const char *device_name, int r)
  */
 static int acp_hw_init(void *handle)
 {
-	int r, i;
+	int r;
 	uint64_t acp_base;
 	u32 val = 0;
 	u32 count = 0;
-	struct device *dev;
 	struct i2s_platform_data *i2s_pdata = NULL;
 
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
@@ -341,15 +351,10 @@ static int acp_hw_init(void *handle)
 	if (r)
 		goto failure;
 
-	for (i = 0; i < ACP_DEVS ; i++) {
-		dev = get_mfd_cell_dev(adev->acp.acp_cell[i].name, i);
-		r = pm_genpd_add_device(&adev->acp.acp_genpd->gpd, dev);
-		if (r) {
-			dev_err(dev, "Failed to add dev to genpd\n");
-			goto failure;
-		}
-	}
-
+	r = device_for_each_child(adev->acp.parent, &adev->acp.acp_genpd->gpd,
+				  acp_genpd_add_device);
+	if (r)
+		goto failure;
 
 	/* Assert Soft reset of ACP */
 	val = cgs_read_register(adev->acp.cgs_device, mmACP_SOFT_RESET);
@@ -410,10 +415,8 @@ failure:
  */
 static int acp_hw_fini(void *handle)
 {
-	int i, ret;
 	u32 val = 0;
 	u32 count = 0;
-	struct device *dev;
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
 
 	/* return early if no ACP */
@@ -458,13 +461,8 @@ static int acp_hw_fini(void *handle)
 		udelay(100);
 	}
 
-	for (i = 0; i < ACP_DEVS ; i++) {
-		dev = get_mfd_cell_dev(adev->acp.acp_cell[i].name, i);
-		ret = pm_genpd_remove_device(dev);
-		/* If removal fails, dont giveup and try rest */
-		if (ret)
-			dev_err(dev, "remove dev from genpd failed\n");
-	}
+	device_for_each_child(adev->acp.parent, NULL,
+			      acp_genpd_remove_device);
 
 	mfd_remove_devices(adev->acp.parent);
 	kfree(adev->acp.acp_res);
Signature · 1 line
2.30.2
author maintainer
#101 lore raw

PATCH 101/236 6lowpan: iphc: Fix an off-by-one check of array index

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit 9af417610b6142e826fd1ee8ba7ff3e9a2133a5a ]

The bounds check of id is off-by-one and the comparison should be >= rather >. Currently the WARN_ON_ONCE check does not stop the out of range indexing of &ldev->ctx.table[id] so also add a return path if the bounds are out of range.

Addresses-Coverity: ("Illegal address computation").

Fixes 5609c185f24d ("6lowpan: iphc: add support for stateful compression")
---
 net/6lowpan/debugfs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/6lowpan/debugfs.c +2 -1
index 1c140af06d52..600b9563bfc5 100644
@@ -170,7 +170,8 @@ static void lowpan_dev_debugfs_ctx_init(struct net_device *dev,
 	struct dentry *root;
 	char buf[32];
 
-	WARN_ON_ONCE(id > LOWPAN_IPHC_CTX_TABLE_SIZE);
+	if (WARN_ON_ONCE(id >= LOWPAN_IPHC_CTX_TABLE_SIZE))
+		return;
 
 	sprintf(buf, "%d", id);
 
Signature · 1 line
2.30.2
author maintainer
#103 lore raw

PATCH 103/236 tcp: seq_file: Avoid skipping sk during tcp_seek_last_pos

In reply to Greg Kroah-Hartman

From: Martin KaFai Lau <[email protected]>

[ Upstream commit 525e2f9fd0229eb10cb460a9e6d978257f24804e ]

st->bucket stores the current bucket number.
st->offset stores the offset within this bucket that is the sk to be seq_show(). Thus, st->offset only makes sense within the same st->bucket.

These two variables are an optimization for the common no-lseek case. When resuming the seq_file iteration (i.e. seq_start()), tcp_seek_last_pos() tries to continue from the st->offset at bucket st->bucket.

However, it is possible that the bucket pointed by st->bucket has changed and st->offset may end up skipping the whole st->bucket without finding a sk. In this case, tcp_seek_last_pos() currently continues to satisfy the offset condition in the next (and incorrect) bucket. Instead, regardless of the offset value, the first sk of the next bucket should be returned. Thus, "bucket == st->bucket" check is added to tcp_seek_last_pos().

The chance of hitting this is small and the issue is a decade old, so targeting for the next tree.

---
 net/ipv4/tcp_ipv4.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
net/ipv4/tcp_ipv4.c +3 -2
index 04e259a04443..71395e745bc5 100644
@@ -2417,6 +2417,7 @@ static void *tcp_get_idx(struct seq_file *seq, loff_t pos)
 static void *tcp_seek_last_pos(struct seq_file *seq)
 {
 	struct tcp_iter_state *st = seq->private;
+	int bucket = st->bucket;
 	int offset = st->offset;
 	int orig_num = st->num;
 	void *rc = NULL;
@@ -2427,7 +2428,7 @@ static void *tcp_seek_last_pos(struct seq_file *seq)
 			break;
 		st->state = TCP_SEQ_STATE_LISTENING;
 		rc = listening_get_next(seq, NULL);
-		while (offset-- && rc)
+		while (offset-- && rc && bucket == st->bucket)
 			rc = listening_get_next(seq, rc);
 		if (rc)
 			break;
@@ -2438,7 +2439,7 @@ static void *tcp_seek_last_pos(struct seq_file *seq)
 		if (st->bucket > tcp_hashinfo.ehash_mask)
 			break;
 		rc = established_get_first(seq);
-		while (offset-- && rc)
+		while (offset-- && rc && bucket == st->bucket)
 			rc = established_get_next(seq, rc);
 	}
 
Signature · 1 line
2.30.2
author maintainer
#104 lore raw

PATCH 104/236 ARM: dts: meson8: Use a higher default GPU clock frequency

In reply to Greg Kroah-Hartman

From: Martin Blumenstingl <[email protected]>

[ Upstream commit 44cf630bcb8c5ec78125805c9447dd5766792224 ]

We are seeing "imprecise external abort (0x1406)" errors during boot (which then cause the whole board to hang) on Meson8 (but not Meson8m2). These are observed while trying to access the GPU's registers when the MALI clock is running at it's default setting of 24MHz. The 3.10 vendor kernel uses 318.75MHz as "default" GPU frequency. Using that makes the "imprecise external aborts" go away.
Add the assigned-clocks and assigned-clock-rates properties to also bump the MALI clock to 318.75MHz before accessing any of it's registers.

---
 arch/arm/boot/dts/meson8.dtsi | 5 +++++
 1 file changed, 5 insertions(+)
arch/arm/boot/dts/meson8.dtsi +5 -0
index 04688e8abce2..740a6c816266 100644
@@ -251,8 +251,13 @@
 					  "pp2", "ppmmu2", "pp4", "ppmmu4",
 					  "pp5", "ppmmu5", "pp6", "ppmmu6";
 			resets = <&reset RESET_MALI>;
+
 			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
 			clock-names = "bus", "core";
+
+			assigned-clocks = <&clkc CLKID_MALI>;
+			assigned-clock-rates = <318750000>;
+
 			operating-points-v2 = <&gpu_opp_table>;
 		};
 	};
Signature · 1 line
2.30.2
author maintainer
#106 lore raw

PATCH 106/236 ARM: dts: meson8b: mxq: Fix the pwm regulator supply properties

In reply to Greg Kroah-Hartman

From: Anand Moon <[email protected]>

[ Upstream commit 632062e540becbbcb067523ec8bcadb1239d9578 ]

After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs. Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply instead of dummy regulator.
Add missing pwm-supply for regulator-vcck regulator node.

[    7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree
[    7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed
[    7.117184] VCCK: supplied by regulator-dummy
[    7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT
[    7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled
[    7.118498] VDDEE: will resolve supply early: pwm
[    7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree
[    7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed
[    7.118553] VDDEE: supplied by regulator-dummy
[    7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT
Fixes dee51cd0d2e8 ("ARM: dts: meson8b: mxq: add the VDDEE regulator")
Fixes d94f60e3dfa0 ("ARM: dts: meson8b: mxq: improve support for the TRONFY MXQ S805")
---
 arch/arm/boot/dts/meson8b-mxq.dts | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
arch/arm/boot/dts/meson8b-mxq.dts +3 -1
index 33037ef62d0a..b2edac1fce6d 100644
@@ -39,6 +39,8 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
+		pwm-supply = <&vcc_5v>;
+
 		pwms = <&pwm_cd 0 1148 0>;
 		pwm-dutycycle-range = <100 0>;
 
@@ -84,7 +86,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 1 1148 0>;
 		pwm-dutycycle-range = <100 0>;
Signature · 1 line
2.30.2
author maintainer
#105 lore raw

PATCH 105/236 ARM: dts: meson8b: odroidc1: Fix the pwm regulator supply properties

In reply to Greg Kroah-Hartman

From: Anand Moon <[email protected]>

[ Upstream commit 876228e9f935f19c7afc7ba394d17e2ec9143b65 ]

After enabling CONFIG_REGULATOR_DEBUG=y we observe below debug logs. Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply instead of dummy regulator.

[    7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree
[    7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed
[    7.117184] VCCK: supplied by regulator-dummy
[    7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT
[    7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled
[    7.118498] VDDEE: will resolve supply early: pwm
[    7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree
[    7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed
[    7.118553] VDDEE: supplied by regulator-dummy
[    7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT
Fixes 524d96083b66 ("ARM: dts: meson8b: odroidc1: add the CPU voltage regulator")
Fixes 8bdf38be712d ("ARM: dts: meson8b: odroidc1: add the VDDEE regulator")
---
 arch/arm/boot/dts/meson8b-odroidc1.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/meson8b-odroidc1.dts +2 -2
index 5963566dbcc9..73ce1c13da24 100644
@@ -136,7 +136,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&p5v0>;
+		pwm-supply = <&p5v0>;
 
 		pwms = <&pwm_cd 0 12218 0>;
 		pwm-dutycycle-range = <91 0>;
@@ -168,7 +168,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&p5v0>;
+		pwm-supply = <&p5v0>;
 
 		pwms = <&pwm_cd 1 12218 0>;
 		pwm-dutycycle-range = <91 0>;
Signature · 1 line
2.30.2
author maintainer
#143 lore raw

PATCH 143/236 net/mlx5: Register to devlink ingress VLAN filter trap

In reply to Greg Kroah-Hartman

From: Aya Levin <[email protected]>

[ Upstream commit 82e6c96f04e13c72d91777455836ffd012853caa ]

Add traps registration to mlx5_core devlink register/unregister flow. This patch registers INGRESS_VLAN_FILTER trap.

---
 .../net/ethernet/mellanox/mlx5/core/devlink.c | 51 +++++++++++++++++++
 1 file changed, 51 insertions(+)
drivers/net/ethernet/mellanox/mlx5/core/devlink.c +51 -0
index bf5cf022e279..2c7f2eff1e17 100644
@@ -376,6 +376,48 @@ static void mlx5_devlink_set_params_init_values(struct devlink *devlink)
 #endif
 }
 
+#define MLX5_TRAP_DROP(_id, _group_id)					\
+	DEVLINK_TRAP_GENERIC(DROP, DROP, _id,				\
+			     DEVLINK_TRAP_GROUP_GENERIC_ID_##_group_id, \
+			     DEVLINK_TRAP_METADATA_TYPE_F_IN_PORT)
+
+static const struct devlink_trap mlx5_traps_arr[] = {
+	MLX5_TRAP_DROP(INGRESS_VLAN_FILTER, L2_DROPS),
+};
+
+static const struct devlink_trap_group mlx5_trap_groups_arr[] = {
+	DEVLINK_TRAP_GROUP_GENERIC(L2_DROPS, 0),
+};
+
+static int mlx5_devlink_traps_register(struct devlink *devlink)
+{
+	struct mlx5_core_dev *core_dev = devlink_priv(devlink);
+	int err;
+
+	err = devlink_trap_groups_register(devlink, mlx5_trap_groups_arr,
+					   ARRAY_SIZE(mlx5_trap_groups_arr));
+	if (err)
+		return err;
+
+	err = devlink_traps_register(devlink, mlx5_traps_arr, ARRAY_SIZE(mlx5_traps_arr),
+				     &core_dev->priv);
+	if (err)
+		goto err_trap_group;
+	return 0;
+
+err_trap_group:
+	devlink_trap_groups_unregister(devlink, mlx5_trap_groups_arr,
+				       ARRAY_SIZE(mlx5_trap_groups_arr));
+	return err;
+}
+
+static void mlx5_devlink_traps_unregister(struct devlink *devlink)
+{
+	devlink_traps_unregister(devlink, mlx5_traps_arr, ARRAY_SIZE(mlx5_traps_arr));
+	devlink_trap_groups_unregister(devlink, mlx5_trap_groups_arr,
+				       ARRAY_SIZE(mlx5_trap_groups_arr));
+}
+
 int mlx5_devlink_register(struct devlink *devlink, struct device *dev)
 {
 	int err;
@@ -390,8 +432,16 @@ int mlx5_devlink_register(struct devlink *devlink, struct device *dev)
 		goto params_reg_err;
 	mlx5_devlink_set_params_init_values(devlink);
 	devlink_params_publish(devlink);
+
+	err = mlx5_devlink_traps_register(devlink);
+	if (err)
+		goto traps_reg_err;
+
 	return 0;
 
+traps_reg_err:
+	devlink_params_unregister(devlink, mlx5_devlink_params,
+				  ARRAY_SIZE(mlx5_devlink_params));
 params_reg_err:
 	devlink_unregister(devlink);
 	return err;
@@ -399,6 +449,7 @@ params_reg_err:
 
 void mlx5_devlink_unregister(struct devlink *devlink)
 {
+	mlx5_devlink_traps_unregister(devlink);
 	devlink_params_unregister(devlink, mlx5_devlink_params,
 				  ARRAY_SIZE(mlx5_devlink_params));
 	devlink_unregister(devlink);
Signature · 1 line
2.30.2
author maintainer
#144 lore raw

PATCH 144/236 net/mlx5: Fix unpublish devlink parameters

In reply to Greg Kroah-Hartman

From: Parav Pandit <[email protected]>

[ Upstream commit 6f35723864b42ec9e9bb95a503449633395c4975 ]

Cleanup routine missed to unpublish the parameters. Add it.

Fixes e890acd5ff18 ("net/mlx5: Add devlink flow_steering_mode parameter")
---
 drivers/net/ethernet/mellanox/mlx5/core/devlink.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/mellanox/mlx5/core/devlink.c +1 -0
index 2c7f2eff1e17..4cba110f6ef8 100644
@@ -450,6 +450,7 @@ params_reg_err:
 void mlx5_devlink_unregister(struct devlink *devlink)
 {
 	mlx5_devlink_traps_unregister(devlink);
+	devlink_params_unpublish(devlink);
 	devlink_params_unregister(devlink, mlx5_devlink_params,
 				  ARRAY_SIZE(mlx5_devlink_params));
 	devlink_unregister(devlink);
Signature · 1 line
2.30.2
author maintainer
#148 lore raw

PATCH 148/236 usb: dwc3: qcom: add IRQ check

In reply to Greg Kroah-Hartman

From: Sergey Shtylyov <[email protected]>

[ Upstream commit 175006956740f70ca23394c58f8d7804776741bd ]

In dwc3_qcom_acpi_register_core(), the driver neglects to check the result of platform_get_irq()'s call and blithely assigns the negative error codes to the allocated child device's IRQ resource and then passing this resource to platform_device_add_resources() and later causing dwc3_otg_get_irq() to fail anyway. Stop calling platform_device_add_resources() with the invalid IRQ #s, so that there's less complexity in the IRQ error checking.

Fixes 2bc02355f8ba ("usb: dwc3: qcom: Add support for booting with ACPI")
---
 drivers/usb/dwc3/dwc3-qcom.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/usb/dwc3/dwc3-qcom.c +4 -0
index 8bd077fb1190..2a29e2f681fe 100644
@@ -610,6 +610,10 @@ static int dwc3_qcom_acpi_register_core(struct platform_device *pdev)
 		qcom->acpi_pdata->dwc3_core_base_size;
 
 	irq = platform_get_irq(pdev_irq, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto out;
+	}
 	child_res[1].flags = IORESOURCE_IRQ;
 	child_res[1].start = child_res[1].end = irq;
 
Signature · 1 line
2.30.2
author maintainer
#145 lore raw

PATCH 145/236 ASoC: rt5682: Implement remove callback

In reply to Greg Kroah-Hartman

From: Stephen Boyd <[email protected]>

[ Upstream commit 87b42abae99d3d851aec64cd4d0f7def8113950e ]

Let's implement a remove callback for this driver that's similar to the shutdown hook, but also disables the regulators before they're put by devm code.

Cc Jairaj Arava <[email protected]>
Cc Sathyanarayana Nujella <[email protected]>
Cc Pierre-Louis Bossart <[email protected]>
Cc Shuming Fan <[email protected]>
Cc Ranjani Sridharan <[email protected]>
---
 sound/soc/codecs/rt5682-i2c.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
sound/soc/codecs/rt5682-i2c.c +11 -0
index 547445d1e3c6..e2b4b10e679a 100644
@@ -275,6 +275,16 @@ static void rt5682_i2c_shutdown(struct i2c_client *client)
 	rt5682_reset(rt5682);
 }
 
+static int rt5682_i2c_remove(struct i2c_client *client)
+{
+	struct rt5682_priv *rt5682 = i2c_get_clientdata(client);
+
+	rt5682_i2c_shutdown(client);
+	regulator_bulk_disable(ARRAY_SIZE(rt5682->supplies), rt5682->supplies);
+
+	return 0;
+}
+
 static const struct of_device_id rt5682_of_match[] = {
 	{.compatible = "realtek,rt5682i"},
 	{},
@@ -301,6 +311,7 @@ static struct i2c_driver rt5682_i2c_driver = {
 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
 	},
 	.probe = rt5682_i2c_probe,
+	.remove = rt5682_i2c_remove,
 	.shutdown = rt5682_i2c_shutdown,
 	.id_table = rt5682_i2c_id,
 };
Signature · 1 line
2.30.2
author maintainer
#146 lore raw

PATCH 146/236 ASoC: rt5682: Properly turn off regulators if wrong device ID

In reply to Greg Kroah-Hartman

From: Douglas Anderson <[email protected]>

[ Upstream commit 772d44526e203c062171786e514373f129616278 ]

When I booted up on a board that had a slightly different codec stuffed on it, I got this message at bootup:

rt5682 9-001a: Device with ID register 6749 is not rt5682

That's normal/expected, but what wasn't normal was the splat that I got after:

  WARNING: CPU: 7 PID: 176 at drivers/regulator/core.c:2151 _regulator_put+0x150/0x158
  pc : _regulator_put+0x150/0x158
  ...
  Call trace:
   _regulator_put+0x150/0x158
   regulator_bulk_free+0x48/0x70
   devm_regulator_bulk_release+0x20/0x2c
   release_nodes+0x1cc/0x244
   devres_release_all+0x44/0x60
   really_probe+0x17c/0x378
   ...

This is because the error paths don't turn off the regulator. Let's fix that.

Fixes 0ddce71c21f0 ("ASoC: rt5682: add rt5682 codec driver")
Fixes 87b42abae99d ("ASoC: rt5682: Implement remove callback")
---
 sound/soc/codecs/rt5682-i2c.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
sound/soc/codecs/rt5682-i2c.c +12 -1
index e2b4b10e679a..464f2c27f71a 100644
@@ -117,6 +117,13 @@ static struct snd_soc_dai_driver rt5682_dai[] = {
 	},
 };
 
+static void rt5682_i2c_disable_regulators(void *data)
+{
+	struct rt5682_priv *rt5682 = data;
+
+	regulator_bulk_disable(ARRAY_SIZE(rt5682->supplies), rt5682->supplies);
+}
+
 static int rt5682_i2c_probe(struct i2c_client *i2c,
 		const struct i2c_device_id *id)
 {
@@ -157,6 +164,11 @@ static int rt5682_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
+	ret = devm_add_action_or_reset(&i2c->dev, rt5682_i2c_disable_regulators,
+				       rt5682);
+	if (ret)
+		return ret;
+
 	ret = regulator_bulk_enable(ARRAY_SIZE(rt5682->supplies),
 				    rt5682->supplies);
 	if (ret) {
@@ -280,7 +292,6 @@ static int rt5682_i2c_remove(struct i2c_client *client)
 	struct rt5682_priv *rt5682 = i2c_get_clientdata(client);
 
 	rt5682_i2c_shutdown(client);
-	regulator_bulk_disable(ARRAY_SIZE(rt5682->supplies), rt5682->supplies);
 
 	return 0;
 }
Signature · 1 line
2.30.2
author maintainer
#147 lore raw

PATCH 147/236 usb: dwc3: meson-g12a: add IRQ check

In reply to Greg Kroah-Hartman

From: Sergey Shtylyov <[email protected]>

[ Upstream commit baa2986bda3f7b2386607587a4185e3dff8f98df ]

The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to devm_request_threaded_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original error code. Stop calling devm_request_threaded_irq() with the invalid IRQ #s.

---
 drivers/usb/dwc3/dwc3-meson-g12a.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/usb/dwc3/dwc3-meson-g12a.c +2 -0
index ffe301d6ea35..d0f9b7c296b0 100644
@@ -598,6 +598,8 @@ static int dwc3_meson_g12a_otg_init(struct platform_device *pdev,
 				   USB_R5_ID_DIG_IRQ, 0);
 
 		irq = platform_get_irq(pdev, 0);
+		if (irq < 0)
+			return irq;
 		ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 						dwc3_meson_g12a_irq_thread,
 						IRQF_ONESHOT, pdev->name, priv);
Signature · 1 line
2.30.2
author maintainer
#149 lore raw

PATCH 149/236 usb: gadget: udc: at91: add IRQ check

In reply to Greg Kroah-Hartman

From: Sergey Shtylyov <[email protected]>

[ Upstream commit 50855c31573b02963f0aa2aacfd4ea41c31ae0e0 ]

The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original error code. Stop calling devm_request_irq() with the invalid IRQ #s.

---
 drivers/usb/gadget/udc/at91_udc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/gadget/udc/at91_udc.c +3 -1
index eede5cedacb4..d9ad9adf7348 100644
@@ -1876,7 +1876,9 @@ static int at91udc_probe(struct platform_device *pdev)
 	clk_disable(udc->iclk);
 
 	/* request UDC and maybe VBUS irqs */
-	udc->udp_irq = platform_get_irq(pdev, 0);
+	udc->udp_irq = retval = platform_get_irq(pdev, 0);
+	if (retval < 0)
+		goto err_unprepare_iclk;
 	retval = devm_request_irq(dev, udc->udp_irq, at91_udc_irq, 0,
 				  driver_name, udc);
 	if (retval) {
Signature · 1 line
2.30.2
author maintainer
#150 lore raw

PATCH 150/236 usb: gadget: udc: s3c2410: add IRQ check

In reply to Greg Kroah-Hartman

From: Sergey Shtylyov <[email protected]>

[ Upstream commit ecff88e819e31081d41cd05bb199b9bd10e13e90 ]

The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original error code. Stop calling request_irq() with the invalid IRQ #s.

---
 drivers/usb/gadget/udc/s3c2410_udc.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/usb/gadget/udc/s3c2410_udc.c +4 -0
index b154b62abefa..82c4f3fb2dae 100644
@@ -1784,6 +1784,10 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
 	s3c2410_udc_reinit(udc);
 
 	irq_usbd = platform_get_irq(pdev, 0);
+	if (irq_usbd < 0) {
+		retval = irq_usbd;
+		goto err_udc_clk;
+	}
 
 	/* irq setup after old hardware state is cleaned up */
 	retval = request_irq(irq_usbd, s3c2410_udc_irq,
Signature · 1 line
2.30.2
author maintainer
#151 lore raw

PATCH 151/236 usb: phy: fsl-usb: add IRQ check

In reply to Greg Kroah-Hartman

From: Sergey Shtylyov <[email protected]>

[ Upstream commit ecc2f30dbb25969908115c81ec23650ed982b004 ]

The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original error code. Stop calling request_irq() with the invalid IRQ #s.

---
 drivers/usb/phy/phy-fsl-usb.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/usb/phy/phy-fsl-usb.c +2 -0
index f34c9437a182..972704262b02 100644
@@ -873,6 +873,8 @@ int usb_otg_start(struct platform_device *pdev)
 
 	/* request irq */
 	p_otg->irq = platform_get_irq(pdev, 0);
+	if (p_otg->irq < 0)
+		return p_otg->irq;
 	status = request_irq(p_otg->irq, fsl_otg_isr,
 				IRQF_SHARED, driver_name, p_otg);
 	if (status) {
Signature · 1 line
2.30.2
author maintainer
#97 lore raw

PATCH 97/236 media: rockchip/rga: fix error handling in probe

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit e58430e1d4fd01b74475d2fbe2e25b5817b729a9 ]

There are a few bugs in this code. 1) No checks for whether dma_alloc_attrs() or __get_free_pages() failed. 2) If video_register_device() fails it doesn't clean up the dma attrs or the free pages. 3) The video_device_release() function frees "vfd" which leads to a use after free on the next line. The call to video_unregister_device() is not required so I have just removed that.

Fixes f7e7b48e6d79 ("[media] rockchip/rga: v4l2 m2m support")
---
 drivers/media/platform/rockchip/rga/rga.c | 27 ++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)
drivers/media/platform/rockchip/rga/rga.c +22 -5
index bf3fd71ec3af..6759091b15e0 100644
@@ -863,12 +863,12 @@ static int rga_probe(struct platform_device *pdev)
 	if (IS_ERR(rga->m2m_dev)) {
 		v4l2_err(&rga->v4l2_dev, "Failed to init mem2mem device\n");
 		ret = PTR_ERR(rga->m2m_dev);
-		goto unreg_video_dev;
+		goto rel_vdev;
 	}
 
 	ret = pm_runtime_resume_and_get(rga->dev);
 	if (ret < 0)
-		goto unreg_video_dev;
+		goto rel_vdev;
 
 	rga->version.major = (rga_read(rga, RGA_VERSION_INFO) >> 24) & 0xFF;
 	rga->version.minor = (rga_read(rga, RGA_VERSION_INFO) >> 20) & 0x0F;
@@ -882,11 +882,23 @@ static int rga_probe(struct platform_device *pdev)
 	rga->cmdbuf_virt = dma_alloc_attrs(rga->dev, RGA_CMDBUF_SIZE,
 					   &rga->cmdbuf_phy, GFP_KERNEL,
 					   DMA_ATTR_WRITE_COMBINE);
+	if (!rga->cmdbuf_virt) {
+		ret = -ENOMEM;
+		goto rel_vdev;
+	}
 
 	rga->src_mmu_pages =
 		(unsigned int *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, 3);
+	if (!rga->src_mmu_pages) {
+		ret = -ENOMEM;
+		goto free_dma;
+	}
 	rga->dst_mmu_pages =
 		(unsigned int *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, 3);
+	if (rga->dst_mmu_pages) {
+		ret = -ENOMEM;
+		goto free_src_pages;
+	}
 
 	def_frame.stride = (def_frame.width * def_frame.fmt->depth) >> 3;
 	def_frame.size = def_frame.stride * def_frame.height;
@@ -894,7 +906,7 @@ static int rga_probe(struct platform_device *pdev)
 	ret = video_register_device(vfd, VFL_TYPE_VIDEO, -1);
 	if (ret) {
 		v4l2_err(&rga->v4l2_dev, "Failed to register video device\n");
-		goto rel_vdev;
+		goto free_dst_pages;
 	}
 
 	v4l2_info(&rga->v4l2_dev, "Registered %s as /dev/%s\n",
@@ -902,10 +914,15 @@ static int rga_probe(struct platform_device *pdev)
 
 	return 0;
 
+free_dst_pages:
+	free_pages((unsigned long)rga->dst_mmu_pages, 3);
+free_src_pages:
+	free_pages((unsigned long)rga->src_mmu_pages, 3);
+free_dma:
+	dma_free_attrs(rga->dev, RGA_CMDBUF_SIZE, rga->cmdbuf_virt,
+		       rga->cmdbuf_phy, DMA_ATTR_WRITE_COMBINE);
 rel_vdev:
 	video_device_release(vfd);
-unreg_video_dev:
-	video_unregister_device(rga->vfd);
 unreg_v4l2_dev:
 	v4l2_device_unregister(&rga->v4l2_dev);
 err_put_clk:
Signature · 1 line
2.30.2
author maintainer
#133 lore raw

PATCH 133/236 drm/msm/mdp4: refactor HW revision detection into read_mdp_hw_revision

In reply to Greg Kroah-Hartman

From: David Heidelberg <[email protected]>

[ Upstream commit 4d319afe666b0fc9a9855ba9bdf9ae3710ecf431 ]

Inspired by MDP5 code.
Also use DRM_DEV_INFO for MDP version as MDP5 does.

Cosmetic change: uint32_t -> u32 - checkpatch suggestion.

---
 drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c | 27 ++++++++++++++++--------
 1 file changed, 18 insertions(+), 9 deletions(-)
drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c +18 -9
index 2f75e3905202..b73af9ddcf72 100644
@@ -19,20 +19,13 @@ static int mdp4_hw_init(struct msm_kms *kms)
 {
 	struct mdp4_kms *mdp4_kms = to_mdp4_kms(to_mdp_kms(kms));
 	struct drm_device *dev = mdp4_kms->dev;
-	uint32_t version, major, minor, dmap_cfg, vg_cfg;
+	u32 major, minor, dmap_cfg, vg_cfg;
 	unsigned long clk;
 	int ret = 0;
 
 	pm_runtime_get_sync(dev->dev);
 
-	mdp4_enable(mdp4_kms);
-	version = mdp4_read(mdp4_kms, REG_MDP4_VERSION);
-	mdp4_disable(mdp4_kms);
-
-	major = FIELD(version, MDP4_VERSION_MAJOR);
-	minor = FIELD(version, MDP4_VERSION_MINOR);
-
-	DBG("found MDP4 version v%d.%d", major, minor);
+	read_mdp_hw_revision(mdp4_kms, &major, &minor);
 
 	if (major != 4) {
 		DRM_DEV_ERROR(dev->dev, "unexpected MDP version: v%d.%d\n",
@@ -409,6 +402,22 @@ fail:
 	return ret;
 }
 
+static void read_mdp_hw_revision(struct mdp4_kms *mdp4_kms,
+				 u32 *major, u32 *minor)
+{
+	struct drm_device *dev = mdp4_kms->dev;
+	u32 version;
+
+	mdp4_enable(mdp4_kms);
+	version = mdp4_read(mdp4_kms, REG_MDP4_VERSION);
+	mdp4_disable(mdp4_kms);
+
+	*major = FIELD(version, MDP4_VERSION_MAJOR);
+	*minor = FIELD(version, MDP4_VERSION_MINOR);
+
+	DRM_DEV_INFO(dev->dev, "MDP4 version v%d.%d", *major, *minor);
+}
+
 struct msm_kms *mdp4_kms_init(struct drm_device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev->dev);
Signature · 1 line
2.30.2
author maintainer
#142 lore raw

PATCH 142/236 drm/msm/dsi: Fix some reference counted resource leaks

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 6977cc89c87506ff17e6c05f0e37f46752256e82 ]

'of_find_device_by_node()' takes a reference that must be released when not needed anymore.
This is expected to be done in 'dsi_destroy()'.

However, there are 2 issues in 'dsi_get_phy()'.

First, if 'of_find_device_by_node()' succeeds but 'platform_get_drvdata()' returns NULL, 'msm_dsi->phy_dev' will still be NULL, and the reference won't be released in 'dsi_destroy()'.

Secondly, as 'of_find_device_by_node()' already takes a reference, there is no need for an additional 'get_device()'.

Move the assignment to 'msm_dsi->phy_dev' a few lines above and remove the unneeded 'get_device()' to solve both issues.

---
 drivers/gpu/drm/msm/dsi/dsi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/msm/dsi/dsi.c +3 -3
index 627048851d99..7e364b9c9f9e 100644
@@ -26,8 +26,10 @@ static int dsi_get_phy(struct msm_dsi *msm_dsi)
 	}
 
 	phy_pdev = of_find_device_by_node(phy_node);
-	if (phy_pdev)
+	if (phy_pdev) {
 		msm_dsi->phy = platform_get_drvdata(phy_pdev);
+		msm_dsi->phy_dev = &phy_pdev->dev;
+	}
 
 	of_node_put(phy_node);
 
@@ -36,8 +38,6 @@ static int dsi_get_phy(struct msm_dsi *msm_dsi)
 		return -EPROBE_DEFER;
 	}
 
-	msm_dsi->phy_dev = get_device(&phy_pdev->dev);
-
 	return 0;
 }
 
Signature · 1 line
2.30.2
author maintainer
#152 lore raw

PATCH 152/236 usb: phy: twl6030: add IRQ checks

In reply to Greg Kroah-Hartman

From: Sergey Shtylyov <[email protected]>

[ Upstream commit 0881e22c06e66af0b64773c91c8868ead3d01aa1 ]

The driver neglects to check the result of platform_get_irq()'s calls and blithely passes the negative error codes to request_threaded_irq() (which takes *unsigned* IRQ #), causing them both to fail with -EINVAL, overriding an original error code. Stop calling request_threaded_irq() with the invalid IRQ #s.

Fixes c33fad0c3748 ("usb: otg: Adding twl6030-usb transceiver driver for OMAP4430")
---
 drivers/usb/phy/phy-twl6030-usb.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/usb/phy/phy-twl6030-usb.c +5 -0
index 8ba6c5a91557..ab3c38a7d8ac 100644
@@ -348,6 +348,11 @@ static int twl6030_usb_probe(struct platform_device *pdev)
 	twl->irq2		= platform_get_irq(pdev, 1);
 	twl->linkstat		= MUSB_UNKNOWN;
 
+	if (twl->irq1 < 0)
+		return twl->irq1;
+	if (twl->irq2 < 0)
+		return twl->irq2;
+
 	twl->comparator.set_vbus	= twl6030_set_vbus;
 	twl->comparator.start_srp	= twl6030_start_srp;
 
Signature · 1 line
2.30.2
author maintainer
#134 lore raw

PATCH 134/236 drm/msm/mdp4: move HW revision detection to earlier phase

In reply to Greg Kroah-Hartman

From: David Heidelberg <[email protected]>

[ Upstream commit 4af4fc92939dc811ef291c0673946555aa4fb71f ]

Fixes if condition, which never worked inside mdp4_kms_init, since HW detection has been done later in mdp4_hw_init.

Fixes eb2b47bb9a03 ("drm/msm/mdp4: only use lut_clk on mdp4.2+")
---
 drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c | 45 ++++++++++++------------
 1 file changed, 22 insertions(+), 23 deletions(-)
drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c +22 -23
index b73af9ddcf72..c1c152e39918 100644
@@ -19,23 +19,12 @@ static int mdp4_hw_init(struct msm_kms *kms)
 {
 	struct mdp4_kms *mdp4_kms = to_mdp4_kms(to_mdp_kms(kms));
 	struct drm_device *dev = mdp4_kms->dev;
-	u32 major, minor, dmap_cfg, vg_cfg;
+	u32 dmap_cfg, vg_cfg;
 	unsigned long clk;
 	int ret = 0;
 
 	pm_runtime_get_sync(dev->dev);
 
-	read_mdp_hw_revision(mdp4_kms, &major, &minor);
-
-	if (major != 4) {
-		DRM_DEV_ERROR(dev->dev, "unexpected MDP version: v%d.%d\n",
-				major, minor);
-		ret = -ENXIO;
-		goto out;
-	}
-
-	mdp4_kms->rev = minor;
-
 	if (mdp4_kms->rev > 1) {
 		mdp4_write(mdp4_kms, REG_MDP4_CS_CONTROLLER0, 0x0707ffff);
 		mdp4_write(mdp4_kms, REG_MDP4_CS_CONTROLLER1, 0x03073f3f);
@@ -81,7 +70,6 @@ static int mdp4_hw_init(struct msm_kms *kms)
 	if (mdp4_kms->rev > 1)
 		mdp4_write(mdp4_kms, REG_MDP4_RESET_STATUS, 1);
 
-out:
 	pm_runtime_put_sync(dev->dev);
 
 	return ret;
@@ -426,6 +414,7 @@ struct msm_kms *mdp4_kms_init(struct drm_device *dev)
 	struct msm_kms *kms = NULL;
 	struct msm_gem_address_space *aspace;
 	int irq, ret;
+	u32 major, minor;
 
 	mdp4_kms = kzalloc(sizeof(*mdp4_kms), GFP_KERNEL);
 	if (!mdp4_kms) {
@@ -482,15 +471,6 @@ struct msm_kms *mdp4_kms_init(struct drm_device *dev)
 	if (IS_ERR(mdp4_kms->pclk))
 		mdp4_kms->pclk = NULL;
 
-	if (mdp4_kms->rev >= 2) {
-		mdp4_kms->lut_clk = devm_clk_get(&pdev->dev, "lut_clk");
-		if (IS_ERR(mdp4_kms->lut_clk)) {
-			DRM_DEV_ERROR(dev->dev, "failed to get lut_clk\n");
-			ret = PTR_ERR(mdp4_kms->lut_clk);
-			goto fail;
-		}
-	}
-
 	mdp4_kms->axi_clk = devm_clk_get(&pdev->dev, "bus_clk");
 	if (IS_ERR(mdp4_kms->axi_clk)) {
 		DRM_DEV_ERROR(dev->dev, "failed to get axi_clk\n");
@@ -499,8 +479,27 @@ struct msm_kms *mdp4_kms_init(struct drm_device *dev)
 	}
 
 	clk_set_rate(mdp4_kms->clk, config->max_clk);
-	if (mdp4_kms->lut_clk)
+
+	read_mdp_hw_revision(mdp4_kms, &major, &minor);
+
+	if (major != 4) {
+		DRM_DEV_ERROR(dev->dev, "unexpected MDP version: v%d.%d\n",
+			      major, minor);
+		ret = -ENXIO;
+		goto fail;
+	}
+
+	mdp4_kms->rev = minor;
+
+	if (mdp4_kms->rev >= 2) {
+		mdp4_kms->lut_clk = devm_clk_get(&pdev->dev, "lut_clk");
+		if (IS_ERR(mdp4_kms->lut_clk)) {
+			DRM_DEV_ERROR(dev->dev, "failed to get lut_clk\n");
+			ret = PTR_ERR(mdp4_kms->lut_clk);
+			goto fail;
+		}
 		clk_set_rate(mdp4_kms->lut_clk, config->max_clk);
+	}
 
 	pm_runtime_enable(dev->dev);
 	mdp4_kms->rpm_enabled = true;
Signature · 1 line
2.30.2
author maintainer
#154 lore raw

PATCH 154/236 selftests/bpf: Fix test_core_autosize on big-endian machines

In reply to Greg Kroah-Hartman

From: Ilya Leoshkevich <[email protected]>

[ Upstream commit d164dd9a5c08c16a883b3de97d13948c7be7fa4d ]

The "probed" part of test_core_autosize copies an integer using bpf_core_read() into an integer of a potentially different size. On big-endian machines a destination offset is required for this to produce a sensible result.

Fixes 888d83b961f6 ("selftests/bpf: Validate libbpf's auto-sizing of LD/ST/STX instructions")
---
 .../selftests/bpf/progs/test_core_autosize.c  | 20 ++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)
tools/testing/selftests/bpf/progs/test_core_autosize.c +15 -5
index 44f5aa2e8956..9a7829c5e4a7 100644
@@ -125,6 +125,16 @@ int handle_downsize(void *ctx)
 	return 0;
 }
 
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+#define bpf_core_read_int bpf_core_read
+#else
+#define bpf_core_read_int(dst, sz, src) ({ \
+	/* Prevent "subtraction from stack pointer prohibited" */ \
+	volatile long __off = sizeof(*dst) - (sz); \
+	bpf_core_read((char *)(dst) + __off, sz, src); \
+})
+#endif
+
 SEC("raw_tp/sys_enter")
 int handle_probed(void *ctx)
 {
@@ -132,23 +142,23 @@ int handle_probed(void *ctx)
 	__u64 tmp;
 
 	tmp = 0;
-	bpf_core_read(&tmp, bpf_core_field_size(in->ptr), &in->ptr);
+	bpf_core_read_int(&tmp, bpf_core_field_size(in->ptr), &in->ptr);
 	ptr_probed = tmp;
 
 	tmp = 0;
-	bpf_core_read(&tmp, bpf_core_field_size(in->val1), &in->val1);
+	bpf_core_read_int(&tmp, bpf_core_field_size(in->val1), &in->val1);
 	val1_probed = tmp;
 
 	tmp = 0;
-	bpf_core_read(&tmp, bpf_core_field_size(in->val2), &in->val2);
+	bpf_core_read_int(&tmp, bpf_core_field_size(in->val2), &in->val2);
 	val2_probed = tmp;
 
 	tmp = 0;
-	bpf_core_read(&tmp, bpf_core_field_size(in->val3), &in->val3);
+	bpf_core_read_int(&tmp, bpf_core_field_size(in->val3), &in->val3);
 	val3_probed = tmp;
 
 	tmp = 0;
-	bpf_core_read(&tmp, bpf_core_field_size(in->val4), &in->val4);
+	bpf_core_read_int(&tmp, bpf_core_field_size(in->val4), &in->val4);
 	val4_probed = tmp;
 
 	return 0;
Signature · 1 line
2.30.2
author maintainer
#153 lore raw

PATCH 153/236 usb: gadget: udc: renesas_usb3: Fix soc_device_match() abuse

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit cea45a3bd2dd4d9c35581328f571afd32b3c9f48 ]

soc_device_match() is intended as a last resort, to handle e.g. quirks that cannot be handled by matching based on a compatible value.

As the device nodes for the Renesas USB 3.0 Peripheral Controller on R-Car E3 and RZ/G2E do have SoC-specific compatible values, the latter can and should be used to match against these devices.

This also fixes support for the USB 3.0 Peripheral Controller on the R-Car E3e (R8A779M6) SoC, which is a different grading of the R-Car E3 (R8A77990) SoC, using the same SoC-specific compatible value.

Fixes 30025efa8b5e75f5 ("usb: gadget: udc: renesas_usb3: add support for r8a77990")
Fixes 546970fdab1da5fe ("usb: gadget: udc: renesas_usb3: add support for r8a774c0")
---
 drivers/usb/gadget/udc/renesas_usb3.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)
drivers/usb/gadget/udc/renesas_usb3.c +7 -10
index f1b35a39d1ba..57d417a7c3e0 100644
@@ -2707,10 +2707,15 @@ static const struct renesas_usb3_priv renesas_usb3_priv_r8a77990 = {
 
 static const struct of_device_id usb3_of_match[] = {
 	{
+		.compatible = "renesas,r8a774c0-usb3-peri",
+		.data = &renesas_usb3_priv_r8a77990,
+	}, {
 		.compatible = "renesas,r8a7795-usb3-peri",
 		.data = &renesas_usb3_priv_gen3,
-	},
-	{
+	}, {
+		.compatible = "renesas,r8a77990-usb3-peri",
+		.data = &renesas_usb3_priv_r8a77990,
+	}, {
 		.compatible = "renesas,rcar-gen3-usb3-peri",
 		.data = &renesas_usb3_priv_gen3,
 	},
@@ -2719,18 +2724,10 @@ static const struct of_device_id usb3_of_match[] = {
 MODULE_DEVICE_TABLE(of, usb3_of_match);
 
 static const struct soc_device_attribute renesas_usb3_quirks_match[] = {
-	{
-		.soc_id = "r8a774c0",
-		.data = &renesas_usb3_priv_r8a77990,
-	},
 	{
 		.soc_id = "r8a7795", .revision = "ES1.*",
 		.data = &renesas_usb3_priv_r8a7795_es1,
 	},
-	{
-		.soc_id = "r8a77990",
-		.data = &renesas_usb3_priv_r8a77990,
-	},
 	{ /* sentinel */ },
 };
 
Signature · 1 line
2.30.2
author maintainer
#155 lore raw

PATCH 155/236 devlink: Clear whole devlink_flash_notify struct

In reply to Greg Kroah-Hartman

From: Leon Romanovsky <[email protected]>

[ Upstream commit ed43fbac717882165a2a4bd64f7b1f56f7467bb7 ]

The { 0 } doesn't clear all fields in the struct, but tells to the compiler to set all fields to zero and doesn't touch any sub-fields if they exists.

The {} is an empty initialiser that instructs to fully initialize whole struct including sub-fields, which is error-prone for future devlink_flash_notify extensions.

Fixes 6700acc5f1fe ("devlink: collect flash notify params into a struct")
---
 net/core/devlink.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/core/devlink.c +2 -2
index 6cc8c64ed62a..96cf4bc1f958 100644
@@ -3403,7 +3403,7 @@ out_free_msg:
 
 void devlink_flash_update_begin_notify(struct devlink *devlink)
 {
-	struct devlink_flash_notify params = { 0 };
+	struct devlink_flash_notify params = {};
 
 	__devlink_flash_update_notify(devlink,
 				      DEVLINK_CMD_FLASH_UPDATE,
@@ -3413,7 +3413,7 @@ EXPORT_SYMBOL_GPL(devlink_flash_update_begin_notify);
 
 void devlink_flash_update_end_notify(struct devlink *devlink)
 {
-	struct devlink_flash_notify params = { 0 };
+	struct devlink_flash_notify params = {};
 
 	__devlink_flash_update_notify(devlink,
 				      DEVLINK_CMD_FLASH_UPDATE_END,
Signature · 1 line
2.30.2
author maintainer
#156 lore raw

PATCH 156/236 samples: pktgen: add missing IPv6 option to pktgen scripts

In reply to Greg Kroah-Hartman

From: Juhee Kang <[email protected]>

[ Upstream commit 0f0c4f1b72e090b23131700bb155944cc28b2a7b ]

Currently, "sample04" and "sample05" are not working properly when running with an IPv6 option("-6"). The commit 0f06a6787e05 ("samples:
Add an IPv6 "-6" option to the pktgen scripts") has omitted the addition of this option at "sample04" and "sample05".

In order to support IPv6 option, this commit adds logic related to IPv6 option.

Fixes 0f06a6787e05 ("samples: Add an IPv6 "-6" option to the pktgen scripts")
---
 samples/pktgen/pktgen_sample04_many_flows.sh      | 12 +++++++-----
 samples/pktgen/pktgen_sample05_flow_per_thread.sh | 12 +++++++-----
 2 files changed, 14 insertions(+), 10 deletions(-)
samples/pktgen/pktgen_sample04_many_flows.sh +7 -5
index 2cd6b701400d..9db1ecf8de8b 100755
@@ -13,13 +13,15 @@ root_check_run_with_sudo "$@"
 # Parameter parsing via include
 source ${basedir}/parameters.sh
 # Set some default params, if they didn't get set
-[ -z "$DEST_IP" ]   && DEST_IP="198.18.0.42"
+if [ -z "$DEST_IP" ]; then
+    [ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1"
+fi
 [ -z "$DST_MAC" ]   && DST_MAC="90:e2:ba:ff:ff:ff"
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0"
 [ -z "$COUNT" ]     && COUNT="0" # Zero means indefinitely
 if [ -n "$DEST_IP" ]; then
-    validate_addr $DEST_IP
-    read -r DST_MIN DST_MAX <<< $(parse_addr $DEST_IP)
+    validate_addr${IP6} $DEST_IP
+    read -r DST_MIN DST_MAX <<< $(parse_addr${IP6} $DEST_IP)
 fi
 if [ -n "$DST_PORT" ]; then
     read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
@@ -65,8 +67,8 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
 
     # Single destination
     pg_set $dev "dst_mac $DST_MAC"
-    pg_set $dev "dst_min $DST_MIN"
-    pg_set $dev "dst_max $DST_MAX"
+    pg_set $dev "dst${IP6}_min $DST_MIN"
+    pg_set $dev "dst${IP6}_max $DST_MAX"
 
     if [ -n "$DST_PORT" ]; then
 	# Single destination port or random port range
samples/pktgen/pktgen_sample05_flow_per_thread.sh +7 -5
index 4cb6252ade39..9fc6c6da028a 100755
@@ -17,14 +17,16 @@ root_check_run_with_sudo "$@"
 # Parameter parsing via include
 source ${basedir}/parameters.sh
 # Set some default params, if they didn't get set
-[ -z "$DEST_IP" ]   && DEST_IP="198.18.0.42"
+if [ -z "$DEST_IP" ]; then
+    [ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1"
+fi
 [ -z "$DST_MAC" ]   && DST_MAC="90:e2:ba:ff:ff:ff"
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0"
 [ -z "$BURST" ]     && BURST=32
 [ -z "$COUNT" ]     && COUNT="0" # Zero means indefinitely
 if [ -n "$DEST_IP" ]; then
-    validate_addr $DEST_IP
-    read -r DST_MIN DST_MAX <<< $(parse_addr $DEST_IP)
+    validate_addr${IP6} $DEST_IP
+    read -r DST_MIN DST_MAX <<< $(parse_addr${IP6} $DEST_IP)
 fi
 if [ -n "$DST_PORT" ]; then
     read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
@@ -55,8 +57,8 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
 
     # Single destination
     pg_set $dev "dst_mac $DST_MAC"
-    pg_set $dev "dst_min $DST_MIN"
-    pg_set $dev "dst_max $DST_MAX"
+    pg_set $dev "dst${IP6}_min $DST_MIN"
+    pg_set $dev "dst${IP6}_max $DST_MAX"
 
     if [ -n "$DST_PORT" ]; then
 	# Single destination port or random port range
Signature · 1 line
2.30.2
author maintainer
#162 lore raw

PATCH 158/236 PM: cpu: Make notifier chain use a raw_spinlock_t

In reply to Greg Kroah-Hartman

From: Valentin Schneider <[email protected]>

[ Upstream commit b2f6662ac08d0e7c25574ce53623c71bdae9dd78 ]

Invoking atomic_notifier_chain_notify() requires acquiring a spinlock_t, which can block under CONFIG_PREEMPT_RT. Notifications for members of the cpu_pm notification chain will be issued by the idle task, which can never block.

Making *all* atomic_notifiers use a raw_spinlock is too big of a hammer, as only notifications issued by the idle task are problematic.

Special-case cpu_pm_notifier_chain by kludging a raw_notifier and raw_spinlock_t together, matching the atomic_notifier behavior with a raw_spinlock_t.

Fixes 70d932985757 ("notifier: Fix broken error handling pattern")
---
 kernel/cpu_pm.c | 50 +++++++++++++++++++++++++++++++++++++------------
 1 file changed, 38 insertions(+), 12 deletions(-)
kernel/cpu_pm.c +38 -12
index f7e1d0eccdbc..246efc74e3f3 100644
@@ -13,19 +13,32 @@
 #include <linux/spinlock.h>
 #include <linux/syscore_ops.h>
 
-static ATOMIC_NOTIFIER_HEAD(cpu_pm_notifier_chain);
+/*
+ * atomic_notifiers use a spinlock_t, which can block under PREEMPT_RT.
+ * Notifications for cpu_pm will be issued by the idle task itself, which can
+ * never block, IOW it requires using a raw_spinlock_t.
+ */
+static struct {
+	struct raw_notifier_head chain;
+	raw_spinlock_t lock;
+} cpu_pm_notifier = {
+	.chain = RAW_NOTIFIER_INIT(cpu_pm_notifier.chain),
+	.lock  = __RAW_SPIN_LOCK_UNLOCKED(cpu_pm_notifier.lock),
+};
 
 static int cpu_pm_notify(enum cpu_pm_event event)
 {
 	int ret;
 
 	/*
-	 * atomic_notifier_call_chain has a RCU read critical section, which
-	 * could be disfunctional in cpu idle. Copy RCU_NONIDLE code to let
-	 * RCU know this.
+	 * This introduces a RCU read critical section, which could be
+	 * disfunctional in cpu idle. Copy RCU_NONIDLE code to let RCU know
+	 * this.
 	 */
 	rcu_irq_enter_irqson();
-	ret = atomic_notifier_call_chain(&cpu_pm_notifier_chain, event, NULL);
+	rcu_read_lock();
+	ret = raw_notifier_call_chain(&cpu_pm_notifier.chain, event, NULL);
+	rcu_read_unlock();
 	rcu_irq_exit_irqson();
 
 	return notifier_to_errno(ret);
@@ -33,10 +46,13 @@ static int cpu_pm_notify(enum cpu_pm_event event)
 
 static int cpu_pm_notify_robust(enum cpu_pm_event event_up, enum cpu_pm_event event_down)
 {
+	unsigned long flags;
 	int ret;
 
 	rcu_irq_enter_irqson();
-	ret = atomic_notifier_call_chain_robust(&cpu_pm_notifier_chain, event_up, event_down, NULL);
+	raw_spin_lock_irqsave(&cpu_pm_notifier.lock, flags);
+	ret = raw_notifier_call_chain_robust(&cpu_pm_notifier.chain, event_up, event_down, NULL);
+	raw_spin_unlock_irqrestore(&cpu_pm_notifier.lock, flags);
 	rcu_irq_exit_irqson();
 
 	return notifier_to_errno(ret);
@@ -49,12 +65,17 @@ static int cpu_pm_notify_robust(enum cpu_pm_event event_up, enum cpu_pm_event ev
  * Add a driver to a list of drivers that are notified about
  * CPU and CPU cluster low power entry and exit.
  *
- * This function may sleep, and has the same return conditions as
- * raw_notifier_chain_register.
+ * This function has the same return conditions as raw_notifier_chain_register.
  */
 int cpu_pm_register_notifier(struct notifier_block *nb)
 {
-	return atomic_notifier_chain_register(&cpu_pm_notifier_chain, nb);
+	unsigned long flags;
+	int ret;
+
+	raw_spin_lock_irqsave(&cpu_pm_notifier.lock, flags);
+	ret = raw_notifier_chain_register(&cpu_pm_notifier.chain, nb);
+	raw_spin_unlock_irqrestore(&cpu_pm_notifier.lock, flags);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(cpu_pm_register_notifier);
 
@@ -64,12 +85,17 @@ EXPORT_SYMBOL_GPL(cpu_pm_register_notifier);
  *
  * Remove a driver from the CPU PM notifier list.
  *
- * This function may sleep, and has the same return conditions as
- * raw_notifier_chain_unregister.
+ * This function has the same return conditions as raw_notifier_chain_unregister.
  */
 int cpu_pm_unregister_notifier(struct notifier_block *nb)
 {
-	return atomic_notifier_chain_unregister(&cpu_pm_notifier_chain, nb);
+	unsigned long flags;
+	int ret;
+
+	raw_spin_lock_irqsave(&cpu_pm_notifier.lock, flags);
+	ret = raw_notifier_chain_unregister(&cpu_pm_notifier.chain, nb);
+	raw_spin_unlock_irqrestore(&cpu_pm_notifier.lock, flags);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(cpu_pm_unregister_notifier);
 
Signature · 1 line
2.30.2