Skip to contentSkip to conversation

eeprom: 93xx46: Add SPI device ID table

PATCH New Mark Brown 1 participant 1 message Sep 22, 2021 Char and misc drivers

lore
Share & tools
lore

Mark Brown

author
#0 lore raw

PATCH 1/1 eeprom: 93xx46: Add SPI device ID table

Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding a SPI device ID table.

Fixes 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by Mark Brown <[email protected]>
---
 drivers/misc/eeprom/eeprom_93xx46.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
drivers/misc/eeprom/eeprom_93xx46.c +18 -0
index 29d8971ec558..660ee924f8b1 100644
@@ -406,6 +406,23 @@ static const struct of_device_id eeprom_93xx46_of_table[] = {
 };
 MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table);
 
+static const struct spi_device_id eeprom_93xx46_spi_ids[] = {
+	{ .name = "eeprom-93xx46",
+	  .driver_data = (kernel_ulong_t)&at93c46_data, },
+	{ .name = "at93c46",
+	  .driver_data = (kernel_ulong_t)&at93c46_data, },
+	{ .name = "at93c46d",
+	  .driver_data = (kernel_ulong_t)&atmel_at93c46d_data, },
+	{ .name = "at93c56",
+	  .driver_data = (kernel_ulong_t)&at93c56_data, },
+	{ .name = "at93c66",
+	  .driver_data = (kernel_ulong_t)&at93c66_data, },
+	{ .name = "93lc46b",
+	  .driver_data = (kernel_ulong_t)&microchip_93lc46b_data, },
+	{}
+};
+MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table);
+
 static int eeprom_93xx46_probe_dt(struct spi_device *spi)
 {
 	const struct of_device_id *of_id =

@@ -555,6 +572,7 @@ static struct spi_driver eeprom_93xx46_driver = {
 	},
 	.probe		= eeprom_93xx46_probe,
 	.remove		= eeprom_93xx46_remove,
+	.id_table	= eeprom_93xx46_spi_ids,
 };
 
 module_spi_driver(eeprom_93xx46_driver);
Signature · 1 line
2.20.1