Skip to contentSkip to conversation

arm64: dts: sm6125: Remove leading zeroes

PATCH Applied Fabio Estevam 5 participants 5 messages Sep 22, 2021 – Oct 20, 2021

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: sm6125: Remove leading zeroes

dtc complains about the leading zeroes:

arch/arm64/boot/dts/qcom/sm6125.dtsi:497.19-503.6: Warning (unit_address_format): /soc/timer@f120000/frame@0f121000: unit name should not have leading 0s arch/arm64/boot/dts/qcom/sm6125.dtsi:505.19-510.6: Warning (unit_address_format): /soc/timer@f120000/frame@0f123000: unit name should not have leading 0s arch/arm64/boot/dts/qcom/sm6125.dtsi:512.19-517.6: Warning (unit_address_format): /soc/timer@f120000/frame@0f124000: unit name should not have leading 0

Remove them.

---
 arch/arm64/boot/dts/qcom/sm6125.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm64/boot/dts/qcom/sm6125.dtsi +3 -3
index 2b37ce6a9f9c..0c1057456597 100644
@@ -494,7 +494,7 @@ timer@f120000 {
 			reg = <0x0f120000 0x1000>;
 			clock-frequency = <19200000>;
 
-			frame@0f121000 {
+			frame@f121000 {
 				frame-number = <0>;
 				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 						<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -502,14 +502,14 @@ frame@0f121000 {
 				      <0x0f122000 0x1000>;
 			};
 
-			frame@0f123000 {
+			frame@f123000 {
 				frame-number = <1>;
 				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x0f123000 0x1000>;
 				status = "disabled";
 			};
 
-			frame@0f124000 {
+			frame@f124000 {
 				frame-number = <2>;
 				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x0f124000 0x1000>;
Signature · 1 line
2.25.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 45 lines · Fabio Estevam

dtc complains about the leading zeroes:

arch/arm64/boot/dts/qcom/sm6125.dtsi:497.19-503.6: Warning (unit_address_format): /soc/timer@f120000/frame@0f121000: unit name should not have leading 0s arch/arm64/boot/dts/qcom/sm6125.dtsi:505.19-510.6: Warning (unit_address_format): /soc/timer@f120000/frame@0f123000: unit name should not have leading 0s arch/arm64/boot/dts/qcom/sm6125.dtsi:512.19-517.6: Warning (unit_address_format): /soc/timer@f120000/frame@0f124000: unit name should not have leading 0

Remove them.

---
 arch/arm64/boot/dts/qcom/sm6125.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm64/boot/dts/qcom/sm6125.dtsi +3 -4
index 2b37ce6a9f9c..0c1057456597 100644
@@ -494,7 +494,7 @@ timer@f120000 {
 			reg = <0x0f120000 0x1000>;
 			clock-frequency = <19200000>;
 
-			frame@0f121000 {
+			frame@f121000 {
 				frame-number = <0>;
 				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 						<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -502,14 +502,14 @@ frame@0f121000 {
 				      <0x0f122000 0x1000>;
 			};
 
-			frame@0f123000 {
+			frame@f123000 {
 				frame-number = <1>;
 				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x0f123000 0x1000>;
 				status = "disabled";
 			};
 
-			frame@0f124000 {
+			frame@f124000 {
 				frame-number = <2>;
 				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x0f124000 0x1000>;
--

2.25.1

#2 lore raw

Re: (subset) [PATCH] arm64: dts: sm6125: Remove leading zeroes

In reply to Fabio Estevam
Quoted 9 lines · Fabio Estevam

dtc complains about the leading zeroes:

arch/arm64/boot/dts/qcom/sm6125.dtsi:497.19-503.6: Warning (unit_address_format): /soc/timer@f120000/frame@0f121000: unit name should not have leading 0s arch/arm64/boot/dts/qcom/sm6125.dtsi:505.19-510.6: Warning (unit_address_format): /soc/timer@f120000/frame@0f123000: unit name should not have leading 0s arch/arm64/boot/dts/qcom/sm6125.dtsi:512.19-517.6: Warning (unit_address_format): /soc/timer@f120000/frame@0f124000: unit name should not have leading 0

Remove them.

[...]

Applied, thanks!

[1/1] arm64: dts: sm6125: Remove leading zeroes

      commit: 2e7586bab95f5d284867c35ca46c0f0c19ccbf7f

Best regards,

Signature · 1 line
Bjorn Andersson <[email protected]>
#3 lore raw
In reply to Fabio Estevam
This patch was applied to qcom/linux.git (refs/heads/for-next):

Hello:

This patch was applied to qcom/linux.git (refs/heads/for-next):

Quoted 9 lines · On Wed, 22 Sep 2021 16:52:08 -0300 you wrote:

dtc complains about the leading zeroes:

arch/arm64/boot/dts/qcom/sm6125.dtsi:497.19-503.6: Warning (unit_address_format): /soc/timer@f120000/frame@0f121000: unit name should not have leading 0s arch/arm64/boot/dts/qcom/sm6125.dtsi:505.19-510.6: Warning (unit_address_format): /soc/timer@f120000/frame@0f123000: unit name should not have leading 0s arch/arm64/boot/dts/qcom/sm6125.dtsi:512.19-517.6: Warning (unit_address_format): /soc/timer@f120000/frame@0f124000: unit name should not have leading 0

Remove them.

[...]

Here is the summary with links:
- arm64: dts: sm6125: Remove leading zeroes

    https://git.kernel.org/qcom/c/07b2fb604672

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Reviewed-by on v1 1/1
#4 lore raw
In reply to Fabio Estevam
Quoted 9 lines · Fabio Estevam

dtc complains about the leading zeroes:

arch/arm64/boot/dts/qcom/sm6125.dtsi:497.19-503.6: Warning (unit_address_format): /soc/timer@f120000/frame@0f121000: unit name should not have leading 0s arch/arm64/boot/dts/qcom/sm6125.dtsi:505.19-510.6: Warning (unit_address_format): /soc/timer@f120000/frame@0f123000: unit name should not have leading 0s arch/arm64/boot/dts/qcom/sm6125.dtsi:512.19-517.6: Warning (unit_address_format): /soc/timer@f120000/frame@0f124000: unit name should not have leading 0

Remove them.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds