linux-next: build failure after merge of the rtc tree
Hi all,
After merging the rtc tree, today's linux-next build (x86_64 allmodconfig) failed like this:
drivers/rtc/rtc-msc313.c: In function 'msc313_rtc_read_alarm':drivers/rtc/rtc-msc313.c:54:12: error: implicit declaration of function 'readw' [-Werror=implicit-function-declaration]
54 | seconds = readw(priv->rtc_base + REG_RTC_MATCH_VAL_L)
| ^~~~~
drivers/rtc/rtc-msc313.c: In function 'msc313_rtc_alarm_irq_enable':
drivers/rtc/rtc-msc313.c:75:2: error: implicit declaration of function 'writew' [-Werror=implicit-function-declaration]
75 | writew(reg, priv->rtc_base + REG_RTC_CTRL);
| ^~~~~~Caused by commit
be7d9c9161b9 ("rtc: Add support for the MSTAR MSC313 RTC")
I have used the rtc tree from next-20210924 for today.
Signature · 2 lines
Cheers, Stephen Rothwell
Hi,
Whoops, my bad, it is probably caused by missing CONFIG_WERROR on my side. It seems to be fixed by
https://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git/commit/?id=27ff63eb076c31086e0a72d41b5c635193a58516
Regards,
Romain
Quoted 24 lines · Stephen Rothwell
Hi all,
After merging the rtc tree, today's linux-next build (
x86_64allmodconfig) failed like this:
drivers/rtc/rtc-msc313.c: In function 'msc313_rtc_read_alarm':drivers/rtc/rtc-msc313.c:54:12: error: implicit declaration of function 'readw' [-Werror=implicit-function-declaration]
54 | seconds =readw(priv->rtc_base + REG_RTC_MATCH_VAL_L)| ^~~~~ drivers/rtc/rtc-msc313.c: In function 'msc313_rtc_alarm_irq_enable': drivers/rtc/rtc-msc313.c:75:2: error: implicit declaration of function 'writew' [-Werror=implicit-function-declaration] 75 | writew(reg, priv->rtc_base + REG_RTC_CTRL); | ^~~~~~Caused by commit
be7d9c9161b9("rtc: Add support for the MSTAR MSC313 RTC")I have used the rtc tree from next-20210924 for today.
--
Cheers,
Stephen Rothwell