dt-bindings: gpio: Convert TI TPIC2810 GPIO Controller bindings to YAML
Subsystems (2)
PATCH v2 1/1 dt-bindings: gpio: Convert TI TPIC2810 GPIO Controller bindings to YAML
Convert gpio-tpic2810 bindings to yaml format and remove outdated bindings in .txt format.
Signed-off-by Aparna M <[email protected]>
--- .../bindings/gpio/gpio-tpic2810.txt | 16 ------- .../bindings/gpio/gpio-tpic2810.yaml | 48 +++++++++++++++++++ 2 files changed, 48 insertions(+), 16 deletions(-) delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml
Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt deleted +0 -16
@@ -1,16 +0,0 @@ -TPIC2810 GPIO controller bindings - -Required properties: - - compatible : Should be "ti,tpic2810". - - reg : The I2C address of the device - - gpio-controller : Marks the device node as a GPIO controller. - - #gpio-cells : Should be two. For consumer use see gpio.txt. - -Example: - - gpio@60 { - compatible = "ti,tpic2810"; - reg = <0x60>; - gpio-controller; - #gpio-cells = <2>; - };
Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml new file +48 -0
48 lines not on this page · raw message
Signature · 1 line
2.17.1
Hi Aparna,
Quoted 5 lines · Aparna M
Convert gpio-tpic2810 bindings to yaml format and remove outdated bindings in .txt format.
Signed-off-by Aparna M <[email protected]>---
Thank you for making the requested changes.
Reviewed-by Aswath Govindraju <[email protected]>
Thanks,
Aswath
Quoted 83 lines
.../bindings/gpio/gpio-tpic2810.txt | 16 ------- .../bindings/gpio/gpio-tpic2810.yaml | 48 +++++++++++++++++++ 2 files changed, 48 insertions(+), 16 deletions(-) delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tpic2810.yamlDocumentation/devicetree/bindings/gpio/gpio-tpic2810.txt deleted +0
-16@@ -1,16 +0,0 @@ -TPIC2810 GPIO controller bindings - -Required properties: - - compatible : Should be "ti,tpic2810". - - reg : The I2C address of the device - - gpio-controller : Marks the device node as a GPIO controller. - - #gpio-cells : Should be two. For consumer use see gpio.txt. - -Example: - - gpio@60 { - compatible = "ti,tpic2810"; - reg = <0x60>; - gpio-controller; - #gpio-cells = <2>; - };Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml new file +48
-0@@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-tpic2810.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TPIC2810 GPIO controller bindings + +maintainers: + - Aswath Govindraju <[email protected]> + +properties: + compatible: + enum: + - ti,tpic2810 + + reg: + maxItems: 1 + description: The I2C address of the device + + gpio-controller: true + + "#gpio-cells": + const: 2 + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + gpio@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + }; + };
Quoted 48 lines · Aparna M
Convert gpio-tpic2810 bindings to yaml format and remove outdated bindings in .txt format.
Signed-off-by Aparna M <[email protected]>--- .../bindings/gpio/gpio-tpic2810.txt | 16 ------- .../bindings/gpio/gpio-tpic2810.yaml | 48 +++++++++++++++++++ 2 files changed, 48 insertions(+), 16 deletions(-) delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tpic2810.yamlDocumentation/devicetree/bindings/gpio/gpio-tpic2810.txt deleted +0
-16@@ -1,16 +0,0 @@ -TPIC2810 GPIO controller bindings - -Required properties: - - compatible : Should be "ti,tpic2810". - - reg : The I2C address of the device - - gpio-controller : Marks the device node as a GPIO controller. - - #gpio-cells : Should be two. For consumer use see gpio.txt. - -Example: - - gpio@60 { - compatible = "ti,tpic2810"; - reg = <0x60>; - gpio-controller; - #gpio-cells = <2>; - };Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml new file +9
-0@@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-tpic2810.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TPIC2810 GPIO controller bindings + +maintainers:
Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml line 19
Quoted 10 lines
Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml new file +10
-0+ - Aswath Govindraju <[email protected]> + +properties: + compatible: + enum: + - ti,tpic2810 + + reg: + maxItems: 1 + description: The I2C address of the device
Drop generic descriptions.
Quoted 9 lines
Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml new file +9
-0+ + gpio-controller: true + + "#gpio-cells": + const: 2 + +required: + - compatible + - reg
Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml line 38
Quoted 10 lines
Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml new file +10
-0+ - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c1 {
i2c {
With those changes,
Reviewed-by Rob Herring <[email protected]>
Quoted 14 lines
Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml new file +10
-0+ #address-cells = <1>; + #size-cells = <0>; + + gpio@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + }; + };Signature · 1 line
2.17.1