Skip to contentSkip to conversation

staging: r8188eu: odm cleanups

PATCH In review Michael Straube 3 participants 18 messages Oct 15, 2021 – Oct 16, 2021 Staging

lore
Share & tools
lore
#0 lore raw

cover staging: r8188eu: odm cleanups

This series removes:
- empty / unused functions from odm.c
- two never set / unused fields from odm_dm_struct
- the function ODM_CmnInfoPtrArrayHook()

Tested on x86_64 with Inter-Tech DMG-02.

Michael Straube (7):
staging: r8188eu: remove empty functions from odm.c
staging: r8188eu: remove ODM_SingleDualAntennaDefaultSetting()
staging: r8188eu: remove GetPSDData()
staging: r8188eu: remove ODM_AntselStatistics_88C()
staging: r8188eu: pBandType is never set
staging: r8188eu: pMacPhyMode is not used
staging: r8188eu: remove ODM_CmnInfoPtrArrayHook()

 drivers/staging/r8188eu/hal/HalPhyRf_8188e.c  |   2 +-
 drivers/staging/r8188eu/hal/odm.c             | 144 ------------------
 drivers/staging/r8188eu/hal/odm_HWConfig.c    |   7 +-
 drivers/staging/r8188eu/hal/odm_interface.c   |   5 -
 drivers/staging/r8188eu/hal/rtl8188e_dm.c     |   2 +-
 .../staging/r8188eu/hal/rtl8188e_hal_init.c   |   5 +-
 drivers/staging/r8188eu/include/odm.h         |  38 -----
 .../staging/r8188eu/include/odm_interface.h   |   2 -
 drivers/staging/r8188eu/include/odm_precomp.h |   2 -
 9 files changed, 6 insertions(+), 201 deletions(-)
Signature · 1 line
2.33.0
#1 lore raw

PATCH 1/7 staging: r8188eu: remove empty functions from odm.c

Remove empty functions from odm.c.

---
 drivers/staging/r8188eu/hal/odm.c             | 32 -------------------
 drivers/staging/r8188eu/hal/odm_HWConfig.c    |  7 +---
 drivers/staging/r8188eu/include/odm.h         |  7 ----
 drivers/staging/r8188eu/include/odm_precomp.h |  2 --
 4 files changed, 1 insertion(+), 47 deletions(-)
drivers/staging/r8188eu/hal/odm.c +0 -32
index 2178ffe41bb3..627213392795 100644
@@ -196,13 +196,9 @@ void ODM_DMWatchdog(struct odm_dm_struct *pDM_Odm)
 	    (pDM_Odm->AntDivType == CGCS_RX_HW_ANTDIV)	||
 	    (pDM_Odm->AntDivType == CG_TRX_SMART_ANTDIV))
 		odm_HwAntDiv(pDM_Odm);
-	else if (pDM_Odm->AntDivType == CGCS_RX_SW_ANTDIV)
-		odm_SwAntDivChkAntSwitch(pDM_Odm, SWAW_STEP_PEAK);
 
 	ODM_TXPowerTrackingCheck(pDM_Odm);
 	odm_EdcaTurboCheck(pDM_Odm);
-
-	odm_dtc(pDM_Odm);
 }
 
 /*  Init /.. Fixed HW value. Only init time. */
@@ -1023,29 +1019,6 @@ void ODM_TXPowerTrackingCheck(struct odm_dm_struct *pDM_Odm)
 /*  We select left antenna as default antenna in initial process, modify it as needed */
 /*  */
 
-/* 3============================================================ */
-/* 3 SW Antenna Diversity */
-/* 3============================================================ */
-void ODM_SwAntDivChkPerPktRssi(struct odm_dm_struct *pDM_Odm, u8 StationID, struct odm_phy_status_info *pPhyInfo)
-{
-}
-
-void odm_SwAntDivChkAntSwitch(struct odm_dm_struct *pDM_Odm, u8 Step)
-{
-}
-
-void ODM_SwAntDivRestAfterLink(struct odm_dm_struct *pDM_Odm)
-{
-}
-
-void odm_SwAntDivChkAntSwitchCallback(struct timer_list *t)
-{
-}
-
-/* 3============================================================ */
-/* 3 SW Antenna Diversity */
-/* 3============================================================ */
-
 void odm_InitHybridAntDiv(struct odm_dm_struct *pDM_Odm)
 {
 	if (!(pDM_Odm->SupportAbility & ODM_BB_ANT_DIV))
@@ -1228,8 +1201,3 @@ void ODM_SingleDualAntennaDefaultSetting(struct odm_dm_struct *pDM_Odm)
 	pDM_SWAT_Table->ANTA_ON = true;
 	pDM_SWAT_Table->ANTB_ON = true;
 }
-
-/* Justin: According to the current RRSI to adjust Response Frame TX power, 2012/11/05 */
-void odm_dtc(struct odm_dm_struct *pDM_Odm)
-{
-}
drivers/staging/r8188eu/hal/odm_HWConfig.c +1 -6
index b76aa93573dc..3d639b2720b2 100644
@@ -376,13 +376,8 @@ static void ODM_PhyStatusQuery_92CSeries(struct odm_dm_struct *dm_odm,
 {
 	odm_RxPhyStatus92CSeries_Parsing(dm_odm, pPhyInfo, pPhyStatus,
 					 pPktinfo, adapt);
-	if (dm_odm->RSSI_test) {
-		/*  Select the packets to do RSSI checking for antenna switching. */
-		if (pPktinfo->bPacketToSelf || pPktinfo->bPacketBeacon)
-				ODM_SwAntDivChkPerPktRssi(dm_odm, pPktinfo->StationID, pPhyInfo);
-	} else {
+	if (!dm_odm->RSSI_test)
 		odm_Process_RSSIForDM(dm_odm, pPhyInfo, pPktinfo);
-	}
 }
 
 void ODM_PhyStatusQuery(struct odm_dm_struct *dm_odm,
drivers/staging/r8188eu/include/odm.h +0 -7
index 187f872d09b5..435626f05fd2 100644
@@ -875,16 +875,11 @@ void ODM_SetAntenna(struct odm_dm_struct *pDM_Odm, u8 Antenna);
 
 void ODM_RF_Saving(struct odm_dm_struct *pDM_Odm, u8 bForceInNormal);
 
-void ODM_SwAntDivRestAfterLink(struct odm_dm_struct *pDM_Odm);
-
 void ODM_TXPowerTrackingCheck(struct odm_dm_struct *pDM_Odm);
 
 bool ODM_RAStateCheck(struct odm_dm_struct *pDM_Odm, s32 RSSI,
 		      bool bForceUpdate, u8 *pRATRState);
 
-void ODM_SwAntDivChkPerPktRssi(struct odm_dm_struct *pDM_Odm, u8 StationID,
-			       struct odm_phy_status_info *pPhyInfo);
-
 u32 ConvertTo_dB(u32 Value);
 
 u32 GetPSDData(struct odm_dm_struct *pDM_Odm, unsigned int point,
@@ -914,6 +909,4 @@ void ODM_AntselStatistics_88C(struct odm_dm_struct *pDM_Odm, u8 MacId,
 
 void ODM_SingleDualAntennaDefaultSetting(struct odm_dm_struct *pDM_Odm);
 
-void odm_dtc(struct odm_dm_struct *pDM_Odm);
-
 #endif
drivers/staging/r8188eu/include/odm_precomp.h +0 -2
index 892a2501f05a..22299f167af8 100644
@@ -43,13 +43,11 @@ void odm_CommonInfoSelfUpdate(struct odm_dm_struct *pDM_Odm);
 void odm_FalseAlarmCounterStatistics(struct odm_dm_struct *pDM_Odm);
 void odm_DIG(struct odm_dm_struct *pDM_Odm);
 void odm_CCKPacketDetectionThresh(struct odm_dm_struct *pDM_Odm);
-void odm_SwAntDivChkAntSwitch(struct odm_dm_struct *pDM_Odm, u8 Step);
 void odm_EdcaTurboCheck(struct odm_dm_struct *pDM_Odm);
 void odm_CommonInfoSelfInit(struct odm_dm_struct *pDM_Odm);
 void odm_RSSIMonitorCheck(struct odm_dm_struct *pDM_Odm);
 void odm_RefreshRateAdaptiveMask(struct odm_dm_struct *pDM_Odm);
 void odm_TXPowerTrackingThermalMeterInit(struct odm_dm_struct *pDM_Odm);
-void odm_SwAntDivChkAntSwitchCallback(struct timer_list *t);
 void odm_InitHybridAntDiv(struct odm_dm_struct *pDM_Odm);
 void odm_HwAntDiv(struct odm_dm_struct *pDM_Odm);
 
Signature · 1 line
2.33.0
Acked-by on v1 1/7
#2 lore raw

Re: [PATCH 1/7] staging: r8188eu: remove empty functions from odm.c

Thus wrote Michael Straube ([email protected]):

Quoted 15 lines

Remove empty functions from odm.c.

---
 drivers/staging/r8188eu/hal/odm.c             | 32 -------------------
 drivers/staging/r8188eu/hal/odm_HWConfig.c    |  7 +---
 drivers/staging/r8188eu/include/odm.h         |  7 ----
 drivers/staging/r8188eu/include/odm_precomp.h |  2 --
 4 files changed, 1 insertion(+), 47 deletions(-)
drivers/staging/r8188eu/hal/odm.c +0 -0
index 2178ffe41bb3..627213392795 100644

drivers/staging/r8188eu/hal/odm.c void ODM_DMWatchdog(struct odm_dm_struct *pDM_Odm) · line 200

Quoted 5 lines
drivers/staging/r8188eu/hal/odm.c +0 -2
@@ -196,13 +196,9 @@ void ODM_DMWatchdog(struct odm_dm_struct *pDM_Odm)
 	    (pDM_Odm->AntDivType == CGCS_RX_HW_ANTDIV)	||
 	    (pDM_Odm->AntDivType == CG_TRX_SMART_ANTDIV))
 		odm_HwAntDiv(pDM_Odm);
-	else if (pDM_Odm->AntDivType == CGCS_RX_SW_ANTDIV)
-		odm_SwAntDivChkAntSwitch(pDM_Odm, SWAW_STEP_PEAK);

This was the last user of SWAW_STEP_PEAK. The define can be removed now (maybe in a follow-up patch).

#3 lore raw

Re: [PATCH 1/7] staging: r8188eu: remove empty functions from odm.c

Quoted 26 lines · Martin Kaiser

Thus wrote Michael Straube ([email protected]):

Quoted 15 lines

Remove empty functions from odm.c.

---
  drivers/staging/r8188eu/hal/odm.c             | 32 -------------------
  drivers/staging/r8188eu/hal/odm_HWConfig.c    |  7 +---
  drivers/staging/r8188eu/include/odm.h         |  7 ----
  drivers/staging/r8188eu/include/odm_precomp.h |  2 --
  4 files changed, 1 insertion(+), 47 deletions(-)
drivers/staging/r8188eu/hal/odm.c +0 -0
index 2178ffe41bb3..627213392795 100644

drivers/staging/r8188eu/hal/odm.c void ODM_DMWatchdog(struct odm_dm_struct *pDM_Odm) · line 200

Quoted 5 lines
drivers/staging/r8188eu/hal/odm.c +0 -2
@@ -196,13 +196,9 @@ void ODM_DMWatchdog(struct odm_dm_struct *pDM_Odm)
  	    (pDM_Odm->AntDivType == CGCS_RX_HW_ANTDIV)	||
  	    (pDM_Odm->AntDivType == CG_TRX_SMART_ANTDIV))
  		odm_HwAntDiv(pDM_Odm);
-	else if (pDM_Odm->AntDivType == CGCS_RX_SW_ANTDIV)
-		odm_SwAntDivChkAntSwitch(pDM_Odm, SWAW_STEP_PEAK);

This was the last user of SWAW_STEP_PEAK. The define can be removed now (maybe in a follow-up patch).

Quoted 2 lines

Thank you for your review Martin. I'll send follow up patches to remove this and other now unused variables I missed.

Thanks again,
Michael

#4 lore raw

PATCH 2/7 staging: r8188eu: remove ODM_SingleDualAntennaDefaultSetting()

In reply to Michael Straube

Function ODM_SingleDualAntennaDefaultSetting() is not used, remove it.

---
 drivers/staging/r8188eu/hal/odm.c     | 11 -----------
 drivers/staging/r8188eu/include/odm.h |  2 --
 2 files changed, 13 deletions(-)
drivers/staging/r8188eu/hal/odm.c +0 -11
index 627213392795..030bc7bd9905 100644
@@ -1190,14 +1190,3 @@ u32 ConvertTo_dB(u32 Value)
 
 	return dB;
 }
-
-/*  Description: */
-/* 	Set Single/Dual Antenna default setting for products that do not do detection in advance. */
-/*  Added by Joseph, 2012.03.22 */
-void ODM_SingleDualAntennaDefaultSetting(struct odm_dm_struct *pDM_Odm)
-{
-	struct sw_ant_switch *pDM_SWAT_Table = &pDM_Odm->DM_SWAT_Table;
-
-	pDM_SWAT_Table->ANTA_ON = true;
-	pDM_SWAT_Table->ANTB_ON = true;
-}
drivers/staging/r8188eu/include/odm.h +0 -2
index 435626f05fd2..21e08a9f8bf8 100644
@@ -907,6 +907,4 @@ void ODM_CmnInfoUpdate(struct odm_dm_struct *pDM_Odm, u32 CmnInfo, u64 Value);
 void ODM_AntselStatistics_88C(struct odm_dm_struct *pDM_Odm, u8 MacId,
 			      u32 PWDBAll, bool isCCKrate);
 
-void ODM_SingleDualAntennaDefaultSetting(struct odm_dm_struct *pDM_Odm);
-
 #endif
Signature · 1 line
2.33.0
#5 lore raw

Re: [PATCH 2/7] staging: r8188eu: remove ODM_SingleDualAntennaDefaultSetting()

Thus wrote Michael Straube ([email protected]):

Quoted 17 lines

Function ODM_SingleDualAntennaDefaultSetting() is not used, remove it.

---
 drivers/staging/r8188eu/hal/odm.c     | 11 -----------
 drivers/staging/r8188eu/include/odm.h |  2 --
 2 files changed, 13 deletions(-)
drivers/staging/r8188eu/hal/odm.c +0 -0
index 627213392795..030bc7bd9905 100644
@@ -1190,14 +1190,3 @@ u32 ConvertTo_dB(u32 Value)
 
 	return dB;
 }

drivers/staging/r8188eu/hal/odm.c u32 ConvertTo_dB(u32 Value) · line 1202

Quoted 10 lines
drivers/staging/r8188eu/hal/odm.c +0 -10
-
-/*  Description: */
-/* 	Set Single/Dual Antenna default setting for products that do not do detection in advance. */
-/*  Added by Joseph, 2012.03.22 */
-void ODM_SingleDualAntennaDefaultSetting(struct odm_dm_struct *pDM_Odm)
-{
-	struct sw_ant_switch *pDM_SWAT_Table = &pDM_Odm->DM_SWAT_Table;
-
-	pDM_SWAT_Table->ANTA_ON = true;
-	pDM_SWAT_Table->ANTB_ON = true;

ANTA_ON and ANTB_ON can now be removed from struct sw_ant_switch.

#6 lore raw

PATCH 3/7 staging: r8188eu: remove GetPSDData()

In reply to Michael Straube

Function GetPSDData() is not used, remove it. It is the only user of ConvertTo_dB() and ODM_StallExecution(), remove these two functions and the now unused dB_Invert_Table as well.

---
 drivers/staging/r8188eu/hal/odm.c             | 59 -------------------
 drivers/staging/r8188eu/hal/odm_interface.c   |  5 --
 drivers/staging/r8188eu/include/odm.h         |  5 --
 .../staging/r8188eu/include/odm_interface.h   |  2 -
 4 files changed, 71 deletions(-)
drivers/staging/r8188eu/hal/odm.c +0 -59
index 030bc7bd9905..28bd6f36cddd 100644
@@ -5,17 +5,6 @@
 
 #include "../include/odm_precomp.h"
 
-static const u16 dB_Invert_Table[8][12] = {
-	{1, 1, 1, 2, 2, 2, 2, 3, 3, 3, 4, 4},
-	{4, 5, 6, 6, 7, 8, 9, 10, 11, 13, 14, 16},
-	{18, 20, 22, 25, 28, 32, 35, 40, 45, 50, 56, 63},
-	{71, 79, 89, 100, 112, 126, 141, 158, 178, 200, 224, 251},
-	{282, 316, 355, 398, 447, 501, 562, 631, 708, 794, 891, 1000},
-	{1122, 1259, 1413, 1585, 1778, 1995, 2239, 2512, 2818, 3162, 3548, 3981},
-	{4467, 5012, 5623, 6310, 7079, 7943, 8913, 10000, 11220, 12589, 14125, 15849},
-	{17783, 19953, 22387, 25119, 28184, 31623, 35481, 39811, 44668, 50119, 56234, 65535}
-};
-
 /* avoid to warn in FreeBSD ==> To DO modify */
 static u32 EDCAParam[HT_IOT_PEER_MAX][3] = {
 	/*  UL			DL */
@@ -1142,51 +1131,3 @@ void odm_EdcaTurboCheck(struct odm_dm_struct *pDM_Odm)
 	pxmitpriv->last_tx_bytes = pxmitpriv->tx_bytes;
 	precvpriv->last_rx_bytes = precvpriv->rx_bytes;
 }
-
-/*  need to ODM CE Platform */
-/* move to here for ANT detection mechanism using */
-
-u32 GetPSDData(struct odm_dm_struct *pDM_Odm, unsigned int point, u8 initial_gain_psd)
-{
-	u32 psd_report;
-
-	/* Set DCO frequency index, offset=(40MHz/SamplePts)*point */
-	ODM_SetBBReg(pDM_Odm, 0x808, 0x3FF, point);
-
-	/* Start PSD calculation, Reg808[22]=0->1 */
-	ODM_SetBBReg(pDM_Odm, 0x808, BIT(22), 1);
-	/* Need to wait for HW PSD report */
-	ODM_StallExecution(30);
-	ODM_SetBBReg(pDM_Odm, 0x808, BIT(22), 0);
-	/* Read PSD report, Reg8B4[15:0] */
-	psd_report = ODM_GetBBReg(pDM_Odm, 0x8B4, bMaskDWord) & 0x0000FFFF;
-
-	psd_report = (u32)(ConvertTo_dB(psd_report)) + (u32)(initial_gain_psd - 0x1c);
-
-	return psd_report;
-}
-
-u32 ConvertTo_dB(u32 Value)
-{
-	u8 i;
-	u8 j;
-	u32 dB;
-
-	Value = Value & 0xFFFF;
-	for (i = 0; i < 8; i++) {
-		if (Value <= dB_Invert_Table[i][11])
-			break;
-	}
-
-	if (i >= 8)
-		return 96;	/*  maximum 96 dB */
-
-	for (j = 0; j < 12; j++) {
-		if (Value <= dB_Invert_Table[i][j])
-			break;
-	}
-
-	dB = i * 12 + j + 1;
-
-	return dB;
-}
drivers/staging/r8188eu/hal/odm_interface.c +0 -5
index c97104c3682f..7ddba39a0f4b 100644
@@ -77,11 +77,6 @@ s32 ODM_CompareMemory(struct odm_dm_struct *pDM_Odm, void *pBuf1, void *pBuf2, u
 }
 
 /*  ODM Timer relative API. */
-void ODM_StallExecution(u32 usDelay)
-{
-	udelay(usDelay);
-}
-
 void ODM_delay_ms(u32 ms)
 {
 	mdelay(ms);
drivers/staging/r8188eu/include/odm.h +0 -5
index 21e08a9f8bf8..db24678eb0bc 100644
@@ -880,11 +880,6 @@ void ODM_TXPowerTrackingCheck(struct odm_dm_struct *pDM_Odm);
 bool ODM_RAStateCheck(struct odm_dm_struct *pDM_Odm, s32 RSSI,
 		      bool bForceUpdate, u8 *pRATRState);
 
-u32 ConvertTo_dB(u32 Value);
-
-u32 GetPSDData(struct odm_dm_struct *pDM_Odm, unsigned int point,
-	       u8 initial_gain_psd);
-
 u32 ODM_Get_Rate_Bitmap(struct odm_dm_struct *pDM_Odm, u32 macid,
 			u32 ra_mask, u8 rssi_level);
 
drivers/staging/r8188eu/include/odm_interface.h +0 -2
index 3af58e853828..17a315d19a50 100644
@@ -50,8 +50,6 @@ s32 ODM_CompareMemory(struct odm_dm_struct *pDM_Odm, void *pBuf1, void *pBuf2,
 		      u32 length);
 
 /*  ODM Timer relative API. */
-void ODM_StallExecution(u32 usDelay);
-
 void ODM_delay_ms(u32 ms);
 
 void ODM_delay_us(u32 us);
Signature · 1 line
2.33.0
Acked-by on v1 3/7
#7 lore raw

Re: [PATCH 3/7] staging: r8188eu: remove GetPSDData()

Thus wrote Michael Straube ([email protected]):

Quoted 133 lines

Function GetPSDData() is not used, remove it. It is the only user of ConvertTo_dB() and ODM_StallExecution(), remove these two functions and the now unused dB_Invert_Table as well.

---
 drivers/staging/r8188eu/hal/odm.c             | 59 -------------------
 drivers/staging/r8188eu/hal/odm_interface.c   |  5 --
 drivers/staging/r8188eu/include/odm.h         |  5 --
 .../staging/r8188eu/include/odm_interface.h   |  2 -
 4 files changed, 71 deletions(-)
drivers/staging/r8188eu/hal/odm.c +0 -59
index 030bc7bd9905..28bd6f36cddd 100644
@@ -5,17 +5,6 @@
 
 #include "../include/odm_precomp.h"
 
-static const u16 dB_Invert_Table[8][12] = {
-	{1, 1, 1, 2, 2, 2, 2, 3, 3, 3, 4, 4},
-	{4, 5, 6, 6, 7, 8, 9, 10, 11, 13, 14, 16},
-	{18, 20, 22, 25, 28, 32, 35, 40, 45, 50, 56, 63},
-	{71, 79, 89, 100, 112, 126, 141, 158, 178, 200, 224, 251},
-	{282, 316, 355, 398, 447, 501, 562, 631, 708, 794, 891, 1000},
-	{1122, 1259, 1413, 1585, 1778, 1995, 2239, 2512, 2818, 3162, 3548, 3981},
-	{4467, 5012, 5623, 6310, 7079, 7943, 8913, 10000, 11220, 12589, 14125, 15849},
-	{17783, 19953, 22387, 25119, 28184, 31623, 35481, 39811, 44668, 50119, 56234, 65535}
-};
-
 /* avoid to warn in FreeBSD ==> To DO modify */
 static u32 EDCAParam[HT_IOT_PEER_MAX][3] = {
 	/*  UL			DL */
@@ -1142,51 +1131,3 @@ void odm_EdcaTurboCheck(struct odm_dm_struct *pDM_Odm)
 	pxmitpriv->last_tx_bytes = pxmitpriv->tx_bytes;
 	precvpriv->last_rx_bytes = precvpriv->rx_bytes;
 }
-
-/*  need to ODM CE Platform */
-/* move to here for ANT detection mechanism using */
-
-u32 GetPSDData(struct odm_dm_struct *pDM_Odm, unsigned int point, u8 initial_gain_psd)
-{
-	u32 psd_report;
-
-	/* Set DCO frequency index, offset=(40MHz/SamplePts)*point */
-	ODM_SetBBReg(pDM_Odm, 0x808, 0x3FF, point);
-
-	/* Start PSD calculation, Reg808[22]=0->1 */
-	ODM_SetBBReg(pDM_Odm, 0x808, BIT(22), 1);
-	/* Need to wait for HW PSD report */
-	ODM_StallExecution(30);
-	ODM_SetBBReg(pDM_Odm, 0x808, BIT(22), 0);
-	/* Read PSD report, Reg8B4[15:0] */
-	psd_report = ODM_GetBBReg(pDM_Odm, 0x8B4, bMaskDWord) & 0x0000FFFF;
-
-	psd_report = (u32)(ConvertTo_dB(psd_report)) + (u32)(initial_gain_psd - 0x1c);
-
-	return psd_report;
-}
-
-u32 ConvertTo_dB(u32 Value)
-{
-	u8 i;
-	u8 j;
-	u32 dB;
-
-	Value = Value & 0xFFFF;
-	for (i = 0; i < 8; i++) {
-		if (Value <= dB_Invert_Table[i][11])
-			break;
-	}
-
-	if (i >= 8)
-		return 96;	/*  maximum 96 dB */
-
-	for (j = 0; j < 12; j++) {
-		if (Value <= dB_Invert_Table[i][j])
-			break;
-	}
-
-	dB = i * 12 + j + 1;
-
-	return dB;
-}
drivers/staging/r8188eu/hal/odm_interface.c +0 -5
index c97104c3682f..7ddba39a0f4b 100644
@@ -77,11 +77,6 @@ s32 ODM_CompareMemory(struct odm_dm_struct *pDM_Odm, void *pBuf1, void *pBuf2, u
 }
 
 /*  ODM Timer relative API. */
-void ODM_StallExecution(u32 usDelay)
-{
-	udelay(usDelay);
-}
-
 void ODM_delay_ms(u32 ms)
 {
 	mdelay(ms);
drivers/staging/r8188eu/include/odm.h +0 -5
index 21e08a9f8bf8..db24678eb0bc 100644
@@ -880,11 +880,6 @@ void ODM_TXPowerTrackingCheck(struct odm_dm_struct *pDM_Odm);
 bool ODM_RAStateCheck(struct odm_dm_struct *pDM_Odm, s32 RSSI,
 		      bool bForceUpdate, u8 *pRATRState);
 
-u32 ConvertTo_dB(u32 Value);
-
-u32 GetPSDData(struct odm_dm_struct *pDM_Odm, unsigned int point,
-	       u8 initial_gain_psd);
-
 u32 ODM_Get_Rate_Bitmap(struct odm_dm_struct *pDM_Odm, u32 macid,
 			u32 ra_mask, u8 rssi_level);
 
drivers/staging/r8188eu/include/odm_interface.h +0 -2
index 3af58e853828..17a315d19a50 100644
@@ -50,8 +50,6 @@ s32 ODM_CompareMemory(struct odm_dm_struct *pDM_Odm, void *pBuf1, void *pBuf2,
 		      u32 length);
 
 /*  ODM Timer relative API. */
-void ODM_StallExecution(u32 usDelay);
-
 void ODM_delay_ms(u32 ms);
 
 void ODM_delay_us(u32 us);
Signature · 1 line
2.33.0
#8 lore raw

PATCH 4/7 staging: r8188eu: remove ODM_AntselStatistics_88C()

In reply to Michael Straube

Function ODM_AntselStatistics_88C() is not used, remove it.

---
 drivers/staging/r8188eu/hal/odm.c     | 21 ---------------------
 drivers/staging/r8188eu/include/odm.h |  3 ---
 2 files changed, 24 deletions(-)
drivers/staging/r8188eu/hal/odm.c +0 -21
index 28bd6f36cddd..d3d13164ca8f 100644
@@ -1016,27 +1016,6 @@ void odm_InitHybridAntDiv(struct odm_dm_struct *pDM_Odm)
 	ODM_AntennaDiversityInit_88E(pDM_Odm);
 }
 
-void ODM_AntselStatistics_88C(struct odm_dm_struct *pDM_Odm, u8 MacId, u32 PWDBAll, bool isCCKrate)
-{
-	struct sw_ant_switch *pDM_SWAT_Table = &pDM_Odm->DM_SWAT_Table;
-
-	if (pDM_SWAT_Table->antsel == 1) {
-		if (isCCKrate) {
-			pDM_SWAT_Table->CCK_Ant1_Cnt[MacId]++;
-		} else {
-			pDM_SWAT_Table->OFDM_Ant1_Cnt[MacId]++;
-			pDM_SWAT_Table->RSSI_Ant1_Sum[MacId] += PWDBAll;
-		}
-	} else {
-		if (isCCKrate) {
-			pDM_SWAT_Table->CCK_Ant2_Cnt[MacId]++;
-		} else {
-			pDM_SWAT_Table->OFDM_Ant2_Cnt[MacId]++;
-			pDM_SWAT_Table->RSSI_Ant2_Sum[MacId] += PWDBAll;
-		}
-	}
-}
-
 void odm_HwAntDiv(struct odm_dm_struct *pDM_Odm)
 {
 	if (!(pDM_Odm->SupportAbility & ODM_BB_ANT_DIV))
drivers/staging/r8188eu/include/odm.h +0 -3
index db24678eb0bc..a8e9089433ba 100644
@@ -899,7 +899,4 @@ void ODM_CmnInfoPtrArrayHook(struct odm_dm_struct *pDM_Odm,
 
 void ODM_CmnInfoUpdate(struct odm_dm_struct *pDM_Odm, u32 CmnInfo, u64 Value);
 
-void ODM_AntselStatistics_88C(struct odm_dm_struct *pDM_Odm, u8 MacId,
-			      u32 PWDBAll, bool isCCKrate);
-
 #endif
Signature · 1 line
2.33.0
#9 lore raw

Re: [PATCH 4/7] staging: r8188eu: remove ODM_AntselStatistics_88C()

Thus wrote Michael Straube ([email protected]):

Quoted 27 lines

Function ODM_AntselStatistics_88C() is not used, remove it.

---
 drivers/staging/r8188eu/hal/odm.c     | 21 ---------------------
 drivers/staging/r8188eu/include/odm.h |  3 ---
 2 files changed, 24 deletions(-)
drivers/staging/r8188eu/hal/odm.c +0 -11
index 28bd6f36cddd..d3d13164ca8f 100644
@@ -1016,27 +1016,6 @@ void odm_InitHybridAntDiv(struct odm_dm_struct *pDM_Odm)
 	ODM_AntennaDiversityInit_88E(pDM_Odm);
 }
 
-void ODM_AntselStatistics_88C(struct odm_dm_struct *pDM_Odm, u8 MacId, u32 PWDBAll, bool isCCKrate)
-{
-	struct sw_ant_switch *pDM_SWAT_Table = &pDM_Odm->DM_SWAT_Table;
-
-	if (pDM_SWAT_Table->antsel == 1) {
-		if (isCCKrate) {
-			pDM_SWAT_Table->CCK_Ant1_Cnt[MacId]++;
-		} else {
-			pDM_SWAT_Table->OFDM_Ant1_Cnt[MacId]++;
-			pDM_SWAT_Table->RSSI_Ant1_Sum[MacId] += PWDBAll;
-		}

drivers/staging/r8188eu/hal/odm.c void odm_InitHybridAntDiv(struct odm_dm_struct *pDM_Odm) · line 1039

Quoted 10 lines
drivers/staging/r8188eu/hal/odm.c +0 -10
-	} else {
-		if (isCCKrate) {
-			pDM_SWAT_Table->CCK_Ant2_Cnt[MacId]++;
-		} else {
-			pDM_SWAT_Table->OFDM_Ant2_Cnt[MacId]++;
-			pDM_SWAT_Table->RSSI_Ant2_Sum[MacId] += PWDBAll;
-		}
-	}
-}
-

Yet again, that seems to make a bunch of variables unused.
I guess that antsel, CCK_Ant1_Cnt, OFDM_Ant1_Cnt, RSSI_Ant1_Sum and their Ant2 versions can be removed (haven't tried it yet, though).

I'm really curious to see what's left when we're done with all these removals...

Best regards,
Martin

#10 lore raw

PATCH 5/7 staging: r8188eu: pBandType is never set

In reply to Michael Straube

pBandType is never set, it stays at the default value 0. Remove it from odm_dm_struct and remove related unneeded code.

---
 drivers/staging/r8188eu/hal/HalPhyRf_8188e.c | 2 +-
 drivers/staging/r8188eu/hal/odm.c            | 3 ---
 drivers/staging/r8188eu/include/odm.h        | 8 --------
 3 files changed, 1 insertion(+), 12 deletions(-)
drivers/staging/r8188eu/hal/HalPhyRf_8188e.c +1 -1
index f01ee3cd8795..8e9fbc9cf84d 100644
@@ -317,7 +317,7 @@ odm_TXPowerTrackingCallback_ThermalMeter_8188E(
 					X = dm_odm->RFCalibrateInfo.IQKMatrixRegSetting.Value[0][4];
 					Y = dm_odm->RFCalibrateInfo.IQKMatrixRegSetting.Value[0][5];
 
-					if ((X != 0) && (*dm_odm->pBandType == ODM_BAND_2_4G)) {
+					if (X != 0) {
 						if ((X & 0x00000200) != 0)	/* consider minus */
 							X = X | 0xFFFFFC00;
 						ele_A = ((X * ele_D) >> 8) & 0x000003FF;
drivers/staging/r8188eu/hal/odm.c +0 -3
index d3d13164ca8f..85bc5050cda5 100644
@@ -243,9 +243,6 @@ void ODM_CmnInfoHook(struct odm_dm_struct *pDM_Odm, enum odm_common_info_def Cmn
 	case	ODM_CMNINFO_WM_MODE:
 		pDM_Odm->pWirelessMode = (u8 *)pValue;
 		break;
-	case	ODM_CMNINFO_BAND:
-		pDM_Odm->pBandType = (u8 *)pValue;
-		break;
 	case	ODM_CMNINFO_SEC_CHNL_OFFSET:
 		pDM_Odm->pSecChOffset = (u8 *)pValue;
 		break;
drivers/staging/r8188eu/include/odm.h +0 -8
index a8e9089433ba..9745069060d7 100644
@@ -273,7 +273,6 @@ enum odm_common_info_def {
 	ODM_CMNINFO_TX_UNI,
 	ODM_CMNINFO_RX_UNI,
 	ODM_CMNINFO_WM_MODE,		/*  ODM_WIRELESS_MODE_E */
-	ODM_CMNINFO_BAND,		/*  ODM_BAND_TYPE_E */
 	ODM_CMNINFO_SEC_CHNL_OFFSET,	/*  ODM_SEC_CHNL_OFFSET_E */
 	ODM_CMNINFO_SEC_MODE,		/*  ODM_SECURITY_E */
 	ODM_CMNINFO_BW,			/*  ODM_BW_E */
@@ -405,11 +404,6 @@ enum odm_wireless_mode {
 	ODM_WM_AUTO	= BIT(5),
 };
 
-/*  ODM_CMNINFO_BAND */
-enum odm_band_type {
-	ODM_BAND_2_4G	= BIT(0),
-};
-
 /*  ODM_CMNINFO_SEC_CHNL_OFFSET */
 enum odm_sec_chnl_offset {
 	ODM_DONT_CARE	= 0,
@@ -635,8 +629,6 @@ struct odm_dm_struct {
 	u64	*pNumRxBytesUnicast;
 	/*  Wireless mode B/G/A/N = BIT(0)/BIT(1)/BIT(2)/BIT(3) */
 	u8	*pWirelessMode; /* ODM_WIRELESS_MODE_E */
-	/*  Frequence band 2.4G/5G = 0/1 */
-	u8	*pBandType;
 	/*  Secondary channel offset don't_care/below/above = 0/1/2 */
 	u8	*pSecChOffset;
 	/*  Security mode Open/WEP/AES/TKIP = 0/1/2/3 */
Signature · 1 line
2.33.0
Acked-by on v1 5/7
#11 lore raw

Re: [PATCH 5/7] staging: r8188eu: pBandType is never set

Thus wrote Michael Straube ([email protected]):

Quoted 72 lines

pBandType is never set, it stays at the default value 0. Remove it from odm_dm_struct and remove related unneeded code.

---
 drivers/staging/r8188eu/hal/HalPhyRf_8188e.c | 2 +-
 drivers/staging/r8188eu/hal/odm.c            | 3 ---
 drivers/staging/r8188eu/include/odm.h        | 8 --------
 3 files changed, 1 insertion(+), 12 deletions(-)
drivers/staging/r8188eu/hal/HalPhyRf_8188e.c +1 -1
index f01ee3cd8795..8e9fbc9cf84d 100644
@@ -317,7 +317,7 @@ odm_TXPowerTrackingCallback_ThermalMeter_8188E(
 					X = dm_odm->RFCalibrateInfo.IQKMatrixRegSetting.Value[0][4];
 					Y = dm_odm->RFCalibrateInfo.IQKMatrixRegSetting.Value[0][5];
 
-					if ((X != 0) && (*dm_odm->pBandType == ODM_BAND_2_4G)) {
+					if (X != 0) {
 						if ((X & 0x00000200) != 0)	/* consider minus */
 							X = X | 0xFFFFFC00;
 						ele_A = ((X * ele_D) >> 8) & 0x000003FF;
drivers/staging/r8188eu/hal/odm.c +0 -3
index d3d13164ca8f..85bc5050cda5 100644
@@ -243,9 +243,6 @@ void ODM_CmnInfoHook(struct odm_dm_struct *pDM_Odm, enum odm_common_info_def Cmn
 	case	ODM_CMNINFO_WM_MODE:
 		pDM_Odm->pWirelessMode = (u8 *)pValue;
 		break;
-	case	ODM_CMNINFO_BAND:
-		pDM_Odm->pBandType = (u8 *)pValue;
-		break;
 	case	ODM_CMNINFO_SEC_CHNL_OFFSET:
 		pDM_Odm->pSecChOffset = (u8 *)pValue;
 		break;
drivers/staging/r8188eu/include/odm.h +0 -8
index a8e9089433ba..9745069060d7 100644
@@ -273,7 +273,6 @@ enum odm_common_info_def {
 	ODM_CMNINFO_TX_UNI,
 	ODM_CMNINFO_RX_UNI,
 	ODM_CMNINFO_WM_MODE,		/*  ODM_WIRELESS_MODE_E */
-	ODM_CMNINFO_BAND,		/*  ODM_BAND_TYPE_E */
 	ODM_CMNINFO_SEC_CHNL_OFFSET,	/*  ODM_SEC_CHNL_OFFSET_E */
 	ODM_CMNINFO_SEC_MODE,		/*  ODM_SECURITY_E */
 	ODM_CMNINFO_BW,			/*  ODM_BW_E */
@@ -405,11 +404,6 @@ enum odm_wireless_mode {
 	ODM_WM_AUTO	= BIT(5),
 };
 
-/*  ODM_CMNINFO_BAND */
-enum odm_band_type {
-	ODM_BAND_2_4G	= BIT(0),
-};
-
 /*  ODM_CMNINFO_SEC_CHNL_OFFSET */
 enum odm_sec_chnl_offset {
 	ODM_DONT_CARE	= 0,
@@ -635,8 +629,6 @@ struct odm_dm_struct {
 	u64	*pNumRxBytesUnicast;
 	/*  Wireless mode B/G/A/N = BIT(0)/BIT(1)/BIT(2)/BIT(3) */
 	u8	*pWirelessMode; /* ODM_WIRELESS_MODE_E */
-	/*  Frequence band 2.4G/5G = 0/1 */
-	u8	*pBandType;
 	/*  Secondary channel offset don't_care/below/above = 0/1/2 */
 	u8	*pSecChOffset;
 	/*  Security mode Open/WEP/AES/TKIP = 0/1/2/3 */
Signature · 1 line
2.33.0
#12 lore raw

PATCH 6/7 staging: r8188eu: pMacPhyMode is not used

In reply to Michael Straube

pMacPhyMode is not used. Remove it from odm_dm_struct and remove related dead code.

---
 drivers/staging/r8188eu/hal/odm.c     | 3 ---
 drivers/staging/r8188eu/include/odm.h | 3 ---
 2 files changed, 6 deletions(-)
drivers/staging/r8188eu/hal/odm.c +0 -3
index 85bc5050cda5..a2cbe727f6e0 100644
@@ -231,9 +231,6 @@ void ODM_CmnInfoHook(struct odm_dm_struct *pDM_Odm, enum odm_common_info_def Cmn
 	/*  */
 	switch	(CmnInfo) {
 	/*  Dynamic call by reference pointer. */
-	case	ODM_CMNINFO_MAC_PHY_MODE:
-		pDM_Odm->pMacPhyMode = (u8 *)pValue;
-		break;
 	case	ODM_CMNINFO_TX_UNI:
 		pDM_Odm->pNumTxBytesUnicast = (u64 *)pValue;
 		break;
drivers/staging/r8188eu/include/odm.h +0 -3
index 9745069060d7..6cbf64df9be7 100644
@@ -269,7 +269,6 @@ enum odm_common_info_def {
 
 	/*  Dynamic value: */
 /*  POINTER REFERENCE-----------  */
-	ODM_CMNINFO_MAC_PHY_MODE,	/*  ODM_MAC_PHY_MODE_E */
 	ODM_CMNINFO_TX_UNI,
 	ODM_CMNINFO_RX_UNI,
 	ODM_CMNINFO_WM_MODE,		/*  ODM_WIRELESS_MODE_E */
@@ -621,8 +620,6 @@ struct odm_dm_struct {
 	bool	bool_temp;
 	struct adapter *adapter_temp;
 
-	/*  MAC PHY Mode SMSP/DMSP/DMDP = 0/1/2 */
-	u8	*pMacPhyMode;
 	/* TX Unicast byte count */
 	u64	*pNumTxBytesUnicast;
 	/* RX Unicast byte count */
Signature · 1 line
2.33.0
Acked-by on v1 6/7
#13 lore raw

Re: [PATCH 6/7] staging: r8188eu: pMacPhyMode is not used

Thus wrote Michael Straube ([email protected]):

Quoted 46 lines

pMacPhyMode is not used. Remove it from odm_dm_struct and remove related dead code.

---
 drivers/staging/r8188eu/hal/odm.c     | 3 ---
 drivers/staging/r8188eu/include/odm.h | 3 ---
 2 files changed, 6 deletions(-)
drivers/staging/r8188eu/hal/odm.c +0 -3
index 85bc5050cda5..a2cbe727f6e0 100644
@@ -231,9 +231,6 @@ void ODM_CmnInfoHook(struct odm_dm_struct *pDM_Odm, enum odm_common_info_def Cmn
 	/*  */
 	switch	(CmnInfo) {
 	/*  Dynamic call by reference pointer. */
-	case	ODM_CMNINFO_MAC_PHY_MODE:
-		pDM_Odm->pMacPhyMode = (u8 *)pValue;
-		break;
 	case	ODM_CMNINFO_TX_UNI:
 		pDM_Odm->pNumTxBytesUnicast = (u64 *)pValue;
 		break;
drivers/staging/r8188eu/include/odm.h +0 -3
index 9745069060d7..6cbf64df9be7 100644
@@ -269,7 +269,6 @@ enum odm_common_info_def {
 
 	/*  Dynamic value: */
 /*  POINTER REFERENCE-----------  */
-	ODM_CMNINFO_MAC_PHY_MODE,	/*  ODM_MAC_PHY_MODE_E */
 	ODM_CMNINFO_TX_UNI,
 	ODM_CMNINFO_RX_UNI,
 	ODM_CMNINFO_WM_MODE,		/*  ODM_WIRELESS_MODE_E */
@@ -621,8 +620,6 @@ struct odm_dm_struct {
 	bool	bool_temp;
 	struct adapter *adapter_temp;
 
-	/*  MAC PHY Mode SMSP/DMSP/DMDP = 0/1/2 */
-	u8	*pMacPhyMode;
 	/* TX Unicast byte count */
 	u64	*pNumTxBytesUnicast;
 	/* RX Unicast byte count */
Signature · 1 line
2.33.0
#14 lore raw

PATCH 7/7 staging: r8188eu: remove ODM_CmnInfoPtrArrayHook()

In reply to Michael Straube

In ODM_CmnInfoPtrArrayHook() there is only the case ODM_CMNINFO_STA_STATUS and the function is called only with this value. Remove ODM_CmnInfoPtrArrayHook() and fix the three places where it is called.

---
 drivers/staging/r8188eu/hal/odm.c               | 15 ---------------
 drivers/staging/r8188eu/hal/rtl8188e_dm.c       |  2 +-
 drivers/staging/r8188eu/hal/rtl8188e_hal_init.c |  5 +++--
 drivers/staging/r8188eu/include/odm.h           | 10 ----------
 4 files changed, 4 insertions(+), 28 deletions(-)
drivers/staging/r8188eu/hal/odm.c +0 -15
index a2cbe727f6e0..0987ff3e382a 100644
@@ -292,21 +292,6 @@ void ODM_CmnInfoHook(struct odm_dm_struct *pDM_Odm, enum odm_common_info_def Cmn
 	}
 }
 
-void ODM_CmnInfoPtrArrayHook(struct odm_dm_struct *pDM_Odm, enum odm_common_info_def CmnInfo, u16 Index, void *pValue)
-{
-	/*  Hook call by reference pointer. */
-	switch	(CmnInfo) {
-	/*  Dynamic call by reference pointer. */
-	case	ODM_CMNINFO_STA_STATUS:
-		pDM_Odm->pODM_StaInfo[Index] = (struct sta_info *)pValue;
-		break;
-	/* To remove the compiler warning, must add an empty default statement to handle the other values. */
-	default:
-		/* do nothing */
-		break;
-	}
-}
-
 /*  Update Band/CHannel/.. The values are dynamic but non-per-packet. */
 void ODM_CmnInfoUpdate(struct odm_dm_struct *pDM_Odm, u32 CmnInfo, u64 Value)
 {
drivers/staging/r8188eu/hal/rtl8188e_dm.c +1 -1
index 1ca24a507d6d..f1a1015eedfb 100644
@@ -90,7 +90,7 @@ static void Update_ODM_ComInfo_88E(struct adapter *Adapter)
 	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_RF_ANTENNA_TYPE, hal_data->TRxAntDivType);
 
 	for (i = 0; i < NUM_STA; i++)
-		ODM_CmnInfoPtrArrayHook(dm_odm, ODM_CMNINFO_STA_STATUS, i, NULL);
+		dm_odm->pODM_StaInfo[i] = NULL;
 }
 
 void rtl8188e_InitHalDm(struct adapter *Adapter)
drivers/staging/r8188eu/hal/rtl8188e_hal_init.c +3 -2
index dd8d6b4a9d48..8c00f2dd67da 100644
@@ -1671,13 +1671,14 @@ void rtl8188e_SetHalODMVar(struct adapter *Adapter, enum hal_odm_variable eVaria
 	case HAL_ODM_STA_INFO:
 		{
 			struct sta_info *psta = (struct sta_info *)pValue1;
+
 			if (bSet) {
 				DBG_88E("### Set STA_(%d) info\n", psta->mac_id);
-				ODM_CmnInfoPtrArrayHook(podmpriv, ODM_CMNINFO_STA_STATUS, psta->mac_id, psta);
+				podmpriv->pODM_StaInfo[psta->mac_id] = psta;
 				ODM_RAInfo_Init(podmpriv, psta->mac_id);
 			} else {
 				DBG_88E("### Clean STA_(%d) info\n", psta->mac_id);
-				ODM_CmnInfoPtrArrayHook(podmpriv, ODM_CMNINFO_STA_STATUS, psta->mac_id, NULL);
+				podmpriv->pODM_StaInfo[psta->mac_id] = NULL;
 		       }
 		}
 		break;
drivers/staging/r8188eu/include/odm.h +0 -10
index 6cbf64df9be7..841603b341bd 100644
@@ -305,12 +305,6 @@ enum odm_common_info_def {
 	ODM_CMNINFO_BT_BUSY,			/* Check Bt is using or not */
 	ODM_CMNINFO_BT_DISABLE_EDCA,
 /* CALL BY VALUE-------------*/
-
-	/*  Dynamic ptr array hook itms. */
-	ODM_CMNINFO_STA_STATUS,
-	ODM_CMNINFO_PHY_STATUS,
-	ODM_CMNINFO_MAC_STATUS,
-	ODM_CMNINFO_MAX,
 };
 
 /*  2011/10/20 MH Define ODM support ability.  ODM_CMNINFO_ABILITY */
@@ -882,10 +876,6 @@ void ODM_CmnInfoInit(struct odm_dm_struct *pDM_Odm,
 void ODM_CmnInfoHook(struct odm_dm_struct *pDM_Odm,
 		     enum odm_common_info_def CmnInfo, void *pValue);
 
-void ODM_CmnInfoPtrArrayHook(struct odm_dm_struct *pDM_Odm,
-			     enum odm_common_info_def CmnInfo,
-			     u16 Index, void *pValue);
-
 void ODM_CmnInfoUpdate(struct odm_dm_struct *pDM_Odm, u32 CmnInfo, u64 Value);
 
 #endif
Signature · 1 line
2.33.0
Acked-by on v1 7/7
#15 lore raw

Re: [PATCH 7/7] staging: r8188eu: remove ODM_CmnInfoPtrArrayHook()

Thus wrote Michael Straube ([email protected]):

Quoted 103 lines

In ODM_CmnInfoPtrArrayHook() there is only the case ODM_CMNINFO_STA_STATUS and the function is called only with this value. Remove ODM_CmnInfoPtrArrayHook() and fix the three places where it is called.

---
 drivers/staging/r8188eu/hal/odm.c               | 15 ---------------
 drivers/staging/r8188eu/hal/rtl8188e_dm.c       |  2 +-
 drivers/staging/r8188eu/hal/rtl8188e_hal_init.c |  5 +++--
 drivers/staging/r8188eu/include/odm.h           | 10 ----------
 4 files changed, 4 insertions(+), 28 deletions(-)
drivers/staging/r8188eu/hal/odm.c +0 -15
index a2cbe727f6e0..0987ff3e382a 100644
@@ -292,21 +292,6 @@ void ODM_CmnInfoHook(struct odm_dm_struct *pDM_Odm, enum odm_common_info_def Cmn
 	}
 }
 
-void ODM_CmnInfoPtrArrayHook(struct odm_dm_struct *pDM_Odm, enum odm_common_info_def CmnInfo, u16 Index, void *pValue)
-{
-	/*  Hook call by reference pointer. */
-	switch	(CmnInfo) {
-	/*  Dynamic call by reference pointer. */
-	case	ODM_CMNINFO_STA_STATUS:
-		pDM_Odm->pODM_StaInfo[Index] = (struct sta_info *)pValue;
-		break;
-	/* To remove the compiler warning, must add an empty default statement to handle the other values. */
-	default:
-		/* do nothing */
-		break;
-	}
-}
-
 /*  Update Band/CHannel/.. The values are dynamic but non-per-packet. */
 void ODM_CmnInfoUpdate(struct odm_dm_struct *pDM_Odm, u32 CmnInfo, u64 Value)
 {
drivers/staging/r8188eu/hal/rtl8188e_dm.c +1 -1
index 1ca24a507d6d..f1a1015eedfb 100644
@@ -90,7 +90,7 @@ static void Update_ODM_ComInfo_88E(struct adapter *Adapter)
 	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_RF_ANTENNA_TYPE, hal_data->TRxAntDivType);
 
 	for (i = 0; i < NUM_STA; i++)
-		ODM_CmnInfoPtrArrayHook(dm_odm, ODM_CMNINFO_STA_STATUS, i, NULL);
+		dm_odm->pODM_StaInfo[i] = NULL;
 }
 
 void rtl8188e_InitHalDm(struct adapter *Adapter)
drivers/staging/r8188eu/hal/rtl8188e_hal_init.c +3 -2
index dd8d6b4a9d48..8c00f2dd67da 100644
@@ -1671,13 +1671,14 @@ void rtl8188e_SetHalODMVar(struct adapter *Adapter, enum hal_odm_variable eVaria
 	case HAL_ODM_STA_INFO:
 		{
 			struct sta_info *psta = (struct sta_info *)pValue1;
+
 			if (bSet) {
 				DBG_88E("### Set STA_(%d) info\n", psta->mac_id);
-				ODM_CmnInfoPtrArrayHook(podmpriv, ODM_CMNINFO_STA_STATUS, psta->mac_id, psta);
+				podmpriv->pODM_StaInfo[psta->mac_id] = psta;
 				ODM_RAInfo_Init(podmpriv, psta->mac_id);
 			} else {
 				DBG_88E("### Clean STA_(%d) info\n", psta->mac_id);
-				ODM_CmnInfoPtrArrayHook(podmpriv, ODM_CMNINFO_STA_STATUS, psta->mac_id, NULL);
+				podmpriv->pODM_StaInfo[psta->mac_id] = NULL;
 		       }
 		}
 		break;
drivers/staging/r8188eu/include/odm.h +0 -10
index 6cbf64df9be7..841603b341bd 100644
@@ -305,12 +305,6 @@ enum odm_common_info_def {
 	ODM_CMNINFO_BT_BUSY,			/* Check Bt is using or not */
 	ODM_CMNINFO_BT_DISABLE_EDCA,
 /* CALL BY VALUE-------------*/
-
-	/*  Dynamic ptr array hook itms. */
-	ODM_CMNINFO_STA_STATUS,
-	ODM_CMNINFO_PHY_STATUS,
-	ODM_CMNINFO_MAC_STATUS,
-	ODM_CMNINFO_MAX,
 };
 
 /*  2011/10/20 MH Define ODM support ability.  ODM_CMNINFO_ABILITY */
@@ -882,10 +876,6 @@ void ODM_CmnInfoInit(struct odm_dm_struct *pDM_Odm,
 void ODM_CmnInfoHook(struct odm_dm_struct *pDM_Odm,
 		     enum odm_common_info_def CmnInfo, void *pValue);
 
-void ODM_CmnInfoPtrArrayHook(struct odm_dm_struct *pDM_Odm,
-			     enum odm_common_info_def CmnInfo,
-			     u16 Index, void *pValue);
-
 void ODM_CmnInfoUpdate(struct odm_dm_struct *pDM_Odm, u32 CmnInfo, u64 Value);
 
 #endif
Signature · 1 line
2.33.0
Acked-by on the v1 series
#16 lore raw
In reply to Michael Straube
Quoted 16 lines · Michael Straube

This series removes:
- empty / unused functions from odm.c
- two never set / unused fields from odm_dm_struct
- the function ODM_CmnInfoPtrArrayHook()

Tested on x86_64 with Inter-Tech DMG-02.

Michael Straube (7):
staging: r8188eu: remove empty functions from odm.c
staging: r8188eu: remove ODM_SingleDualAntennaDefaultSetting()
staging: r8188eu: remove GetPSDData()
staging: r8188eu: remove ODM_AntselStatistics_88C()
staging: r8188eu: pBandType is never set
staging: r8188eu: pMacPhyMode is not used
staging: r8188eu: remove ODM_CmnInfoPtrArrayHook()

Quoted 14 lines
 drivers/staging/r8188eu/hal/HalPhyRf_8188e.c  |   2 +-
 drivers/staging/r8188eu/hal/odm.c             | 144 ------------------
 drivers/staging/r8188eu/hal/odm_HWConfig.c    |   7 +-
 drivers/staging/r8188eu/hal/odm_interface.c   |   5 -
 drivers/staging/r8188eu/hal/rtl8188e_dm.c     |   2 +-
 .../staging/r8188eu/hal/rtl8188e_hal_init.c   |   5 +-
 drivers/staging/r8188eu/include/odm.h         |  38 -----
 .../staging/r8188eu/include/odm_interface.h   |   2 -
 drivers/staging/r8188eu/include/odm_precomp.h |   2 -
 9 files changed, 6 insertions(+), 201 deletions(-)
Signature · 1 line
2.33.0

Dear Michael,

Looks good to me. Built and tested on my USB-N10 Nano, works well. Many thanks.

For whole series:

Regards,
Phil

#17 lore raw
Quoted 34 lines · Phillip Potter
Quoted 16 lines · Michael Straube

This series removes:
- empty / unused functions from odm.c
- two never set / unused fields from odm_dm_struct
- the function ODM_CmnInfoPtrArrayHook()

Tested on x86_64 with Inter-Tech DMG-02.

Michael Straube (7):
staging: r8188eu: remove empty functions from odm.c
staging: r8188eu: remove ODM_SingleDualAntennaDefaultSetting()
staging: r8188eu: remove GetPSDData()
staging: r8188eu: remove ODM_AntselStatistics_88C()
staging: r8188eu: pBandType is never set
staging: r8188eu: pMacPhyMode is not used
staging: r8188eu: remove ODM_CmnInfoPtrArrayHook()

Quoted 14 lines
  drivers/staging/r8188eu/hal/HalPhyRf_8188e.c  |   2 +-
  drivers/staging/r8188eu/hal/odm.c             | 144 ------------------
  drivers/staging/r8188eu/hal/odm_HWConfig.c    |   7 +-
  drivers/staging/r8188eu/hal/odm_interface.c   |   5 -
  drivers/staging/r8188eu/hal/rtl8188e_dm.c     |   2 +-
  .../staging/r8188eu/hal/rtl8188e_hal_init.c   |   5 +-
  drivers/staging/r8188eu/include/odm.h         |  38 -----
  .../staging/r8188eu/include/odm_interface.h   |   2 -
  drivers/staging/r8188eu/include/odm_precomp.h |   2 -
  9 files changed, 6 insertions(+), 201 deletions(-)
Signature · 1 line
2.33.0

Dear Michael,

Quoted 9 lines

Looks good to me. Built and tested on my USB-N10 Nano, works well. Many thanks.

For whole series:

Regards,
Phil

Thank you for testing and your ack Phillip.

Regards,
Michael