2nd set of IIO new device support, features, cleanup for 5.16
The following changes since commit 8135cc5b270b3f224615bdee8bd7d66afee87991:
MAINTAINERS: Update the entry for MHI bus (2021-10-19 15:49:14 +0200)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.16b
for you to fetch changes up to 77af145dc7eadcb78d38912b67d6a68050d21a9b:
dt-bindings: iio: frequency: add adrf6780 doc (2021-10-21 21:00:59 +0100)
----------------------------------------------------------------
2nd set of IIO new driver, cleanups and features for the 5.16 cycle
New device support
* adrf6780 microwave upconverter.
- New driver for this interesting device including bindings.
Features
* lite-on ltr501
- Add dt-bindings including vendor ID and of_device_id table.
- Add regulator support.
* sensiron,scd4x
- Add reporting of channel scale.
Cleanups including fixes for things in this cycle
* Tree wide: Another set of dev_err_probe() introductions to reduce noise in logs when deferred probing is needed and provide more debug info. Devices included this time:
- amlogic,meson_saradc
- capella,cm3605
- fsl,imx7d
- maxim,max1118
- maxim,max1241
- nxp,lpc18xx
- qcom,pm8xxxx-xoadc
- rockchip,saradc
- sharp,gp2ap002
- sterricson,ab8500
- ti,ads7950
* core - iio:buffer
- Fix a path where a ret value is not intialized.
* channel-mux
- Add support to mux core subsystem for a settling delay and use it in the iio-channel-mux driver.
- Fix a few dt binding warnings.
* nxp,lpc18xx
- Convert to devm_ functions for all of probe and drop remove()
* st,lsm6dsx
- Suppress a warning due to lack of handling of an enum *_MAX entry that is just there to get the size.
* st,stm32-adc
- Add generic channel binding, deprecating the old approach.
- Add nvmem support to get calibration data for the vrefint channel and use it to perform such calibration.
- Add a binding for sample-time to the generic channel description as it can be per channel.
* ti,adc128s052
- Use devm_ managed functions and drop remove()
* vti,sca3000
- Use sign_extend32() rather than opencoding.
* xilinx,xadc
- Drop irq field from state structure as now just used in probe.
----------------------------------------------------------------
André Gustavo Nakagomi Lopez (1):
iio: adc: lpc18xx_adc: Convert probe to device managed version
Antoniu Miclaus (2):
iio: frequency: adrf6780: add support for ADRF6780
dt-bindings: iio: frequency: add adrf6780 doc
Cai Huoqing (11):
iio: adc: ab8500-gpadc: Make use of the helper function dev_err_probe()
iio: adc: imx7d_adc: Make use of the helper function dev_err_probe()
iio: adc: lpc18xx_adc: Make use of the helper function dev_err_probe()
iio: adc: max1118: Make use of the helper function dev_err_probe()
iio: adc: max1241: Make use of the helper function dev_err_probe()
iio: adc: meson_saradc: Make use of the helper function dev_err_probe()
iio: adc: qcom-pm8xxx-xoadc: Make use of the helper function dev_err_probe()
iio: adc: rockchip_saradc: Make use of the helper function dev_err_probe()
iio: adc: ti-ads7950: Make use of the helper function dev_err_probe()
iio: light: cm3605: Make use of the helper function dev_err_probe()
iio: light: gp2ap002: Make use of the helper function dev_err_probe()
Christophe JAILLET (1):
iio: adc: adc128s052: Simplify adc128_probe()
Colin Ian King (1):
iio: buffer: Fix uninitialized variable ret
Jonathan Cameron (1):
iio: accel: sca3000: Use sign_extend32() instead of opencoding sign extension.
Lars-Peter Clausen (1):
iio: xilinx-xadc: Remove irq field from state struct
Nikita Travkin (4):
dt-bindings: vendor-prefixes: Document liteon vendor prefix
dt-bindings: iio: light: Document ltr501 light sensor bindings
iio: light: ltr501: Add rudimentary regulator support
iio: light: ltr501: Add of_device_id table
Olivier Moysan (7):
dt-bindings: iio: stm32-adc: add generic channel binding
dt-bindings: iio: stm32-adc: add nvmem support for vrefint internal channel
iio: adc: stm32-adc: split channel init into several routines
iio: adc: stm32-adc: add support of generic channels binding
iio: adc: stm32-adc: add support of internal channels
iio: adc: stm32-adc: add vrefint calibration support
iio: adc: stm32-adc: use generic binding for sample-time
Peter Rosin (2):
dt-bindings: iio: io-channel-mux: add optional #io-channel-cells
dt-bindings: iio: io-channel-mux: allow duplicate channel, labels
Roan van Dijk (1):
iio: chemical: scd4x: Add a scale for the co2 concentration reading
Teng Qi (1):
iio: imu: st_lsm6dsx: Avoid potential array overflow in st_lsm6dsx_set_odr()
Vincent Whitchurch (3):
mux: add support for delay after muxing
dt-bindings: iio: io-channel-mux: Add property for settle time
iio: multiplexer: iio-mux: Support settle-time-us property
.../devicetree/bindings/iio/adc/st,stm32-adc.yaml | 108 ++++- .../bindings/iio/frequency/adi,adrf6780.yaml | 131 +++++ .../bindings/iio/light/liteon,ltr501.yaml | 51 ++ .../bindings/iio/multiplexer/io-channel-mux.yaml | 13 +- .../devicetree/bindings/vendor-prefixes.yaml | 2 + drivers/iio/accel/sca3000.c | 3 +- drivers/iio/adc/ab8500-gpadc.c | 22 +- drivers/iio/adc/imx7d_adc.c | 18 +- drivers/iio/adc/lpc18xx_adc.c | 75 ++- drivers/iio/adc/max1118.c | 7 +- drivers/iio/adc/max1241.c | 17 +- drivers/iio/adc/meson_saradc.c | 39 +- drivers/iio/adc/qcom-pm8xxx-xoadc.c | 9 +- drivers/iio/adc/rockchip_saradc.c | 27 +- drivers/iio/adc/stm32-adc-core.c | 1 + drivers/iio/adc/stm32-adc-core.h | 10 + drivers/iio/adc/stm32-adc.c | 422 +++++++++++++++-- drivers/iio/adc/ti-adc128s052.c | 33 +- drivers/iio/adc/ti-ads7950.c | 4 +- drivers/iio/adc/xilinx-xadc-core.c | 5 +- drivers/iio/adc/xilinx-xadc.h | 1 - drivers/iio/chemical/scd4x.c | 9 +- drivers/iio/frequency/Kconfig | 12 + drivers/iio/frequency/Makefile | 1 + drivers/iio/frequency/adrf6780.c | 527 +++++++++++++++++++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 6 +- drivers/iio/industrialio-buffer.c | 2 +- drivers/iio/light/cm3605.c | 29 +- drivers/iio/light/gp2ap002.c | 24 +- drivers/iio/light/ltr501.c | 37 ++ drivers/iio/multiplexer/iio-mux.c | 7 +- drivers/mux/core.c | 38 +- include/linux/mux/consumer.h | 23 +- include/linux/mux/driver.h | 4 + 34 files changed, 1467 insertions(+), 250 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml create mode 100644 Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml create mode 100644 drivers/iio/frequency/adrf6780.c
Quoted 7 lines · Jonathan Cameron
The following changes since commit
8135cc5b270b3f224615bdee8bd7d66afee87991:
MAINTAINERS: Update the entry for MHI bus (2021-10-19 15:49:14 +0200)are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.16b
Pulled and pushed out, thanks.
greg k-h