4.19.216-rc1 review

From: Ming Lei <[email protected]>

commit f2b85040acec9a928b4eb1b57a989324e8e38d3f upstream.

SCSI host release is triggered when SCSI device is freed. We have to make sure that the low-level device driver module won't be unloaded before SCSI host instance is released because shost->hostt is required in the release handler.

Make sure to put LLD module refcnt after SCSI device is released.

Fixes a kernel panic of 'BUG: unable to handle page fault for address' reported by Changhui and Yi.

---
 drivers/scsi/scsi.c       |    4 +++-
 drivers/scsi/scsi_sysfs.c |    9 +++++++++
 2 files changed, 12 insertions(+), 1 deletion(-)

@@ -575,8 +575,10 @@ EXPORT_SYMBOL(scsi_device_get);
  */
 void scsi_device_put(struct scsi_device *sdev)
 {
-	module_put(sdev->host->hostt->module);
+	struct module *mod = sdev->host->hostt->module;
+
 	put_device(&sdev->sdev_gendev);
+	module_put(mod);
 }
 EXPORT_SYMBOL(scsi_device_put);
 

@@ -431,9 +431,12 @@ static void scsi_device_dev_release_user
 	struct list_head *this, *tmp;
 	struct scsi_vpd *vpd_pg80 = NULL, *vpd_pg83 = NULL;
 	unsigned long flags;
+	struct module *mod;
 
 	sdev = container_of(work, struct scsi_device, ew.work);
 
+	mod = sdev->host->hostt->module;
+
 	scsi_dh_release_device(sdev);
 
 	parent = sdev->sdev_gendev.parent;

@@ -474,11 +477,17 @@ static void scsi_device_dev_release_user
 
 	if (parent)
 		put_device(parent);
+	module_put(mod);
 }
 
 static void scsi_device_dev_release(struct device *dev)
 {
 	struct scsi_device *sdp = to_scsi_device(dev);
+
+	/* Set module pointer as NULL in case of module unloading */
+	if (!try_module_get(sdp->host->hostt->module))
+		sdp->host->hostt->module = NULL;
+
 	execute_in_process_context(scsi_device_dev_release_usercontext,
 				   &sdp->ew);
 }

From: Dan Carpenter <[email protected]>

commit 35d2969ea3c7d32aee78066b1f3cf61a0d935a4e upstream.

The bounds checking in avc_ca_pmt() is not strict enough. It should be checking "read_pos + 4" because it's reading 5 bytes. If the "es_info_length" is non-zero then it reads a 6th byte so there needs to be an additional check for that.

I also added checks for the "write_pos". I don't think these are required because "read_pos" and "write_pos" are tied together so checking one ought to be enough. But they make the code easier to understand for me. The check on write_pos is:

	if (write_pos + 4 >= sizeof(c->operand) - 4) {

The first "+ 4" is because we're writing 5 bytes and the last " - 4" is to leave space for the CRC.

The other problem is that "length" can be invalid. It comes from "data_length" in fdtv_ca_pmt().

---
 drivers/media/firewire/firedtv-avc.c |   14 +++++++++++---
 drivers/media/firewire/firedtv-ci.c  |    2 ++
 2 files changed, 13 insertions(+), 3 deletions(-)

@@ -1169,7 +1169,11 @@ int avc_ca_pmt(struct firedtv *fdtv, cha
 		read_pos += program_info_length;
 		write_pos += program_info_length;
 	}
-	while (read_pos < length) {
+	while (read_pos + 4 < length) {
+		if (write_pos + 4 >= sizeof(c->operand) - 4) {
+			ret = -EINVAL;
+			goto out;
+		}
 		c->operand[write_pos++] = msg[read_pos++];
 		c->operand[write_pos++] = msg[read_pos++];
 		c->operand[write_pos++] = msg[read_pos++];

@@ -1181,13 +1185,17 @@ int avc_ca_pmt(struct firedtv *fdtv, cha
 		c->operand[write_pos++] = es_info_length >> 8;
 		c->operand[write_pos++] = es_info_length & 0xff;
 		if (es_info_length > 0) {
+			if (read_pos >= length) {
+				ret = -EINVAL;
+				goto out;
+			}
 			pmt_cmd_id = msg[read_pos++];
 			if (pmt_cmd_id != 1 && pmt_cmd_id != 4)
 				dev_err(fdtv->device, "invalid pmt_cmd_id %d at stream level\n",
 					pmt_cmd_id);
 
-			if (es_info_length > sizeof(c->operand) - 4 -
-					     write_pos) {
+			if (es_info_length > sizeof(c->operand) - 4 - write_pos ||
+			    es_info_length > length - read_pos) {
 				ret = -EINVAL;
 				goto out;
 			}

@@ -138,6 +138,8 @@ static int fdtv_ca_pmt(struct firedtv *f
 	} else {
 		data_length = msg->msg[3];
 	}
+	if (data_length > sizeof(msg->msg) - data_pos)
+		return -EINVAL;
 
 	return avc_ca_pmt(fdtv, &msg->msg[data_pos], data_length);
 }

From: Gustavo A. R. Silva <[email protected]>

commit 829ca44ecf60e9b6f83d0161a6ef10c1304c5060 upstream.

Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used.

So, replace the following form:

sizeof(*pkt) + sizeof(pkt->addr[0])*n

with:

struct_size(pkt, addr, n)

Also, notice that variable size is unnecessary, hence it is removed.

This code was detected with the help of Coccinelle.

---
 drivers/infiniband/hw/qib/qib_user_sdma.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

@@ -908,10 +908,11 @@ static int qib_user_sdma_queue_pkts(cons
 		}
 
 		if (frag_size) {
-			int pktsize, tidsmsize, n;
+			int tidsmsize, n;
+			size_t pktsize;
 
 			n = npages*((2*PAGE_SIZE/frag_size)+1);
-			pktsize = sizeof(*pkt) + sizeof(pkt->addr[0])*n;
+			pktsize = struct_size(pkt, addr, n);
 
 			/*
 			 * Determine if this is tid-sdma or just sdma.

From: Mike Marciniszyn <[email protected]>

commit d39bf40e55e666b5905fdbd46a0dced030ce87be upstream.

Overflowing either addrlimit or bytes_togo can allow userspace to trigger a buffer overflow of kernel memory. Check for overflows in all the places doing math on user controlled buffers.

---
 drivers/infiniband/hw/qib/qib_user_sdma.c |   33 ++++++++++++++++++++----------
 1 file changed, 23 insertions(+), 10 deletions(-)

@@ -606,7 +606,7 @@ done:
 /*
  * How many pages in this iovec element?
  */
-static int qib_user_sdma_num_pages(const struct iovec *iov)
+static size_t qib_user_sdma_num_pages(const struct iovec *iov)
 {
 	const unsigned long addr  = (unsigned long) iov->iov_base;
 	const unsigned long  len  = iov->iov_len;

@@ -662,7 +662,7 @@ static void qib_user_sdma_free_pkt_frag(
 static int qib_user_sdma_pin_pages(const struct qib_devdata *dd,
 				   struct qib_user_sdma_queue *pq,
 				   struct qib_user_sdma_pkt *pkt,
-				   unsigned long addr, int tlen, int npages)
+				   unsigned long addr, int tlen, size_t npages)
 {
 	struct page *pages[8];
 	int i, j;

@@ -726,7 +726,7 @@ static int qib_user_sdma_pin_pkt(const s
 	unsigned long idx;
 
 	for (idx = 0; idx < niov; idx++) {
-		const int npages = qib_user_sdma_num_pages(iov + idx);
+		const size_t npages = qib_user_sdma_num_pages(iov + idx);
 		const unsigned long addr = (unsigned long) iov[idx].iov_base;
 
 		ret = qib_user_sdma_pin_pages(dd, pq, pkt, addr,

@@ -828,8 +828,8 @@ static int qib_user_sdma_queue_pkts(cons
 		unsigned pktnw;
 		unsigned pktnwc;
 		int nfrags = 0;
-		int npages = 0;
-		int bytes_togo = 0;
+		size_t npages = 0;
+		size_t bytes_togo = 0;
 		int tiddma = 0;
 		int cfur;
 

@@ -889,7 +889,11 @@ static int qib_user_sdma_queue_pkts(cons
 
 			npages += qib_user_sdma_num_pages(&iov[idx]);
 
-			bytes_togo += slen;
+			if (check_add_overflow(bytes_togo, slen, &bytes_togo) ||
+			    bytes_togo > type_max(typeof(pkt->bytes_togo))) {
+				ret = -EINVAL;
+				goto free_pbc;
+			}
 			pktnwc += slen >> 2;
 			idx++;
 			nfrags++;

@@ -908,8 +912,7 @@ static int qib_user_sdma_queue_pkts(cons
 		}
 
 		if (frag_size) {
-			int tidsmsize, n;
-			size_t pktsize;
+			size_t tidsmsize, n, pktsize, sz, addrlimit;
 
 			n = npages*((2*PAGE_SIZE/frag_size)+1);
 			pktsize = struct_size(pkt, addr, n);

@@ -927,14 +930,24 @@ static int qib_user_sdma_queue_pkts(cons
 			else
 				tidsmsize = 0;
 
-			pkt = kmalloc(pktsize+tidsmsize, GFP_KERNEL);
+			if (check_add_overflow(pktsize, tidsmsize, &sz)) {
+				ret = -EINVAL;
+				goto free_pbc;
+			}
+			pkt = kmalloc(sz, GFP_KERNEL);
 			if (!pkt) {
 				ret = -ENOMEM;
 				goto free_pbc;
 			}
 			pkt->largepkt = 1;
 			pkt->frag_size = frag_size;
-			pkt->addrlimit = n + ARRAY_SIZE(pkt->addr);
+			if (check_add_overflow(n, ARRAY_SIZE(pkt->addr),
+					       &addrlimit) ||
+			    addrlimit > type_max(typeof(pkt->addrlimit))) {
+				ret = -EINVAL;
+				goto free_pbc;
+			}
+			pkt->addrlimit = addrlimit;
 
 			if (tiddma) {
 				char *tidsm = (char *)pkt + pktsize;

From: Erik Ekman <[email protected]>

commit 041c61488236a5a84789083e3d9f0a51139b6edf upstream.

Everything except the first 32 bits was lost when the pause flags were added. This makes the 50000baseCR2 mode flag (bit 34) not appear.

I have tested this with a 10G card (SFN5122F-R7) by modifying it to return a non-legacy link mode (10000baseCR).

---
 drivers/net/ethernet/sfc/ethtool.c |   10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

@@ -131,20 +131,14 @@ efx_ethtool_get_link_ksettings(struct ne
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
 	struct efx_link_state *link_state = &efx->link_state;
-	u32 supported;
 
 	mutex_lock(&efx->mac_lock);
 	efx->phy_op->get_link_ksettings(efx, cmd);
 	mutex_unlock(&efx->mac_lock);
 
 	/* Both MACs support pause frames (bidirectional and respond-only) */
-	ethtool_convert_link_mode_to_legacy_u32(&supported,
-						cmd->link_modes.supported);
-
-	supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
-
-	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
-						supported);
+	ethtool_link_ksettings_add_link_mode(cmd, supported, Pause);
+	ethtool_link_ksettings_add_link_mode(cmd, supported, Asym_Pause);
 
 	if (LOOPBACK_INTERNAL(efx)) {
 		cmd->base.speed = link_state->speed;

From: Arnd Bergmann <[email protected]>

commit cef397038167ac15d085914493d6c86385773709 upstream.

Stefan Agner reported a bug when using zsram on 32-bit Arm machines with RAM above the 4GB address boundary:

  Unable to handle kernel NULL pointer dereference at virtual address 00000000
  pgd = a27bd01c
  [00000000] *pgd=236a0003, *pmd=1ffa64003
  Internal error: Oops: 207 [#1] SMP ARM
  Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet
  CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1
  Hardware name: BCM2711
  PC is at zs_map_object+0x94/0x338
  LR is at zram_bvec_rw.constprop.0+0x330/0xa64
  pc : [<c0602b38>]    lr : [<c0bda6a0>]    psr: 60000013
  sp : e376bbe0  ip : 00000000  fp : c1e2921c
  r10: 00000002  r9 : c1dda730  r8 : 00000000
  r7 : e8ff7a00  r6 : 00000000  r5 : 02f9ffa0  r4 : e3710000
  r3 : 000fdffe  r2 : c1e0ce80  r1 : ebf979a0  r0 : 00000000
  Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
  Control: 30c5383d  Table: 235c2a80  DAC: fffffffd
  Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6)
  Stack: (0xe376bbe0 to 0xe376c000)

As it turns out, zsram needs to know the maximum memory size, which is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture.

The same problem will be hit on all 32-bit architectures that have a physical address space larger than 4GB and happen to not enable sparsemem and include asm/sparsemem.h from asm/pgtable.h.

After the initial discussion, I suggested just always defining MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is set, or provoking a build error otherwise. This addresses all configurations that can currently have this runtime bug, but leaves all other configurations unchanged.

I looked up the possible number of bits in source code and datasheets, here is what I found:

- on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used
- on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never support more than 32 bits, even though supersections in theory allow up to 40 bits as well.
- on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5 XPA supports up to 60 bits in theory, but 40 bits are more than anyone will ever ship
- On PowerPC, there are three different implementations of 36 bit addressing, but 32-bit is used without CONFIG_PTE_64BIT
- On RISC-V, the normal page table format can support 34 bit addressing. There is no highmem support on RISC-V, so anything above 2GB is unused, but it might be useful to eventually support CONFIG_ZRAM for high pages.

---
 arch/arc/include/asm/pgtable.h        |    2 ++
 arch/arm/include/asm/pgtable-2level.h |    2 ++
 arch/arm/include/asm/pgtable-3level.h |    2 ++
 arch/mips/include/asm/pgtable-32.h    |    3 +++
 arch/powerpc/include/asm/pte-common.h |    2 ++
 arch/riscv/include/asm/pgtable-32.h   |    2 ++
 include/asm-generic/pgtable.h         |   13 +++++++++++++
 7 files changed, 26 insertions(+)

@@ -138,8 +138,10 @@
 
 #ifdef CONFIG_ARC_HAS_PAE40
 #define PTE_BITS_NON_RWX_IN_PD1	(0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE)
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
 #else
 #define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK | _PAGE_CACHEABLE)
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #endif
 
 /**************************************************************************

@@ -78,6 +78,8 @@
 #define PTE_HWTABLE_OFF		(PTE_HWTABLE_PTRS * sizeof(pte_t))
 #define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u32))
 
+#define MAX_POSSIBLE_PHYSMEM_BITS	32
+
 /*
  * PMD_SHIFT determines the size of the area a second-level page table can map
  * PGDIR_SHIFT determines what a third-level page table entry can map

@@ -37,6 +37,8 @@
 #define PTE_HWTABLE_OFF		(0)
 #define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u64))
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
+
 /*
  * PGDIR_SHIFT determines the size a top-level page table entry can map.
  */

@@ -111,6 +111,7 @@ static inline void pmd_clear(pmd_t *pmdp
 
 #if defined(CONFIG_XPA)
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
 #define pte_pfn(x)		(((unsigned long)((x).pte_high >> _PFN_SHIFT)) | (unsigned long)((x).pte_low << _PAGE_PRESENT_SHIFT))
 static inline pte_t
 pfn_pte(unsigned long pfn, pgprot_t prot)

@@ -126,6 +127,7 @@ pfn_pte(unsigned long pfn, pgprot_t prot
 
 #elif defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 36
 #define pte_pfn(x)		((unsigned long)((x).pte_high >> 6))
 
 static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)

@@ -140,6 +142,7 @@ static inline pte_t pfn_pte(unsigned lon
 
 #else
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #ifdef CONFIG_CPU_VR41XX
 #define pte_pfn(x)		((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
 #define pfn_pte(pfn, prot)	__pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))

@@ -110,8 +110,10 @@ static inline bool pte_user(pte_t pte)
  */
 #if defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
 #define PTE_RPN_MASK	(~((1ULL<<PTE_RPN_SHIFT)-1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 36
 #else
 #define PTE_RPN_MASK	(~((1UL<<PTE_RPN_SHIFT)-1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #endif
 
 /* _PAGE_CHG_MASK masks of bits that are to be preserved across

@@ -22,4 +22,6 @@
 #define PGDIR_SIZE      (_AC(1, UL) << PGDIR_SHIFT)
 #define PGDIR_MASK      (~(PGDIR_SIZE - 1))
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 34
+
 #endif /* _ASM_RISCV_PGTABLE_32_H */

@@ -1115,6 +1115,19 @@ static inline bool arch_has_pfn_modify_c
 
 #endif /* !__ASSEMBLY__ */
 
+#if !defined(MAX_POSSIBLE_PHYSMEM_BITS) && !defined(CONFIG_64BIT)
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+/*
+ * ZSMALLOC needs to know the highest PFN on 32-bit architectures
+ * with physical address space extension, but falls back to
+ * BITS_PER_LONG otherwise.
+ */
+#error Missing MAX_POSSIBLE_PHYSMEM_BITS definition
+#else
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
+#endif
+#endif
+
 #ifndef has_transparent_hugepage
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define has_transparent_hugepage() 1

From: Wang Kefeng <[email protected]>

commit eb4f756915875b0ea0757751cd29841f0504d547 upstream.

After commit 77a7300abad7 ("of/irq: Get rid of NO_IRQ usage"), no irq case has been removed, irq_of_parse_and_map() will return 0 in all cases when get error from parse and map an interrupt into linux virq space.

amba_device_register() is only used on no-DT initialization, see
s3c64xx_pl080_init() arch/arm/mach-s3c/pl080.c
ep93xx_init_devices() arch/arm/mach-ep93xx/core.c

They won't set -1 to irq[0], so no need the warn.

This reverts commit 2eac58d5026e4ec8b17ff8b62877fea9e1d2f1b3.

---
 drivers/amba/bus.c |    3 ---
 1 file changed, 3 deletions(-)

@@ -360,9 +360,6 @@ static int amba_device_try_add(struct am
 	void __iomem *tmp;
 	int i, ret;
 
-	WARN_ON(dev->irq[0] == (unsigned int)-1);
-	WARN_ON(dev->irq[1] == (unsigned int)-1);
-
 	ret = request_resource(parent, &dev->res);
 	if (ret)
 		goto err_out;

This is the start of the stable review cycle for the 4.19.216 release. There are 7 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 06 Nov 2021 14:11:51 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.216-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.19.216-rc1

Wang Kefeng <[email protected]>
ARM: 9120/1: Revert "amba: make use of -1 IRQs warn"

Arnd Bergmann <[email protected]>
arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed

Erik Ekman <[email protected]>
sfc: Fix reading non-legacy supported link modes

Mike Marciniszyn <[email protected]>
IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields

Gustavo A. R. Silva <[email protected]>
IB/qib: Use struct_size() helper

Dan Carpenter <[email protected]>
media: firewire: firedtv-avc: fix a buffer overflow in avc_ca_pmt()

Ming Lei <[email protected]>
scsi: core: Put LLD module refcnt after SCSI device is released

-------------

Diffstat:

 Makefile                                  |  4 ++--
 arch/arc/include/asm/pgtable.h            |  2 ++
 arch/arm/include/asm/pgtable-2level.h     |  2 ++
 arch/arm/include/asm/pgtable-3level.h     |  2 ++
 arch/mips/include/asm/pgtable-32.h        |  3 +++
 arch/powerpc/include/asm/pte-common.h     |  2 ++
 arch/riscv/include/asm/pgtable-32.h       |  2 ++
 drivers/amba/bus.c                        |  3 ---
 drivers/infiniband/hw/qib/qib_user_sdma.c | 34 ++++++++++++++++++++++---------
 drivers/media/firewire/firedtv-avc.c      | 14 ++++++++++---
 drivers/media/firewire/firedtv-ci.c       |  2 ++
 drivers/net/ethernet/sfc/ethtool.c        | 10 ++-------
 drivers/scsi/scsi.c                       |  4 +++-
 drivers/scsi/scsi_sysfs.c                 |  9 ++++++++
 include/asm-generic/pgtable.h             | 13 ++++++++++++
 15 files changed, 79 insertions(+), 27 deletions(-)

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

All tests passing for Tegra ...

Test results for stable-v4.19:

    10 builds:	10 pass, 0 fail
    22 boots:	22 pass, 0 fail
    40 tests:	40 pass, 0 fail

Linux version: 4.19.216-rc1-gafcee5295c1e
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Jon

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 4.19.216-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.19.y
* git commit: afcee5295c1e9b8651e30edeac3014a1049f15c1
* git describe: v4.19.215-8-gafcee5295c1e
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.215-8-gafcee5295c1e

## No regressions (compared to v4.19.215)

## No fixes (compared to v4.19.215)

## Test result summary
total: 77617, pass: 62224, fail: 825, skip: 12865, xfail: 1703

## Build Summary
* arm: 130 total, 108 passed, 22 failed
* arm64: 38 total, 38 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 31 total, 30 passed, 1 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 27 total, 27 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 22 total, 22 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Hi Greg,

Build test:
mips (gcc version 11.2.1 20211104): 63 configs -> no failure arm (gcc version 11.2.1 20211104): 116 configs -> no new failure arm64 (gcc version 11.2.1 20211104): 2 configs -> no failure x86_64 (gcc version 11.2.1 20211104): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]

[1]. https://openqa.qa.codethink.co.uk/tests/342

--
Regards
Sudip

Hi!

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y

Best regards,
Pavel

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

Build results:

	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 441 pass: 441 fail: 0

Guenter