x86/sgx: Rename fallback labels in sgx_init()
Subsystems (3)
Jarkko Sakkinen
maintainerPATCH v12 1/2 x86/sgx: Rename fallback labels in sgx_init()
It's hard to add new content to this function because it is time consuming to match fallback and its cause. Rename labels in a way that the name of error label refers to the site where failure happened. This way it is easier to keep on track what is going on.
---
v5:
* A new patch.
--- arch/x86/kernel/cpu/sgx/main.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
arch/x86/kernel/cpu/sgx/main.c +6 -6
@@ -803,12 +803,12 @@ static int __init sgx_init(void)if (!sgx_page_reclaimer_init ()) { ret = -ENOMEM ; - goto err_page_cache; + goto err_reclaimer; } ret =misc_register (&sgx_dev_provision);if (ret) - goto err_kthread; + goto err_provision;/* * Always try to initialize the native *and* KVM drivers.
@@ -821,17 +821,17 @@ static int __init sgx_init(void) ret =sgx_drv_init ();if (sgx_vepc_init () && ret) - goto err_provision; + goto err_driver;return 0 ; -err_provision: +err_driver:misc_deregister (&sgx_dev_provision); -err_kthread: +err_provision:kthread_stop (ksgxd_tsk); -err_page_cache: +err_reclaimer:for (i =0 ; i < sgx_nr_epc_sections; i++) {vfree (sgx_epc_sections[i].pages);memunmap (sgx_epc_sections[i].virt_addr);
Signature · 1 line
2.32.0
Jarkko Sakkinen
maintainerPATCH v12 2/2 x86/sgx: Add an attribute for the amount of SGX memory in a NUMA node
The amount of SGX memory on the system is determined by the BIOS and it varies wildly between systems. It can be from dozens of MB's on desktops or VM's, up to many GB's on servers. Just like for regular memory, it is sometimes useful to know the amount of usable SGX memory in the system.
Introduce CONFIG_HAVE_ARCH_NODE_DEV_GROUP opt-in flag to expose an arch specific attribute group, and add an attribute for the amount of SGX memory in bytes to each NUMA node:
/sys/devices/system/node/nodeX/x86/sgx_total_bytes
---
v12:
* Device ID is set to same as NUMA node ID. Use that to get the correct NUMA node ID in sgx_total_bytes_show().
v11:
* Fix documentation and the commit message.
v10:
* Change DEVICE_ATTR_RO() to static (Greg K-H)
* Change the attribute name as sgx_total_bytes, and attribute group name as "x86" (Dave).
* Add a new config flag HAVE_ARCH_NODE_DEV_GROUP to identify, whether an arch exports arch specific attribute group for NUMA nodes.
v9:
* Fix racy initialization of sysfs attributes:
https://lore.kernel.org/linux-sgx/[email protected]/
v8:
* Fix a bug in sgx_numa_init(): node->dev should be only set after sysfe_create_group(). Otherwise, sysfs_remove_group() will issue a warning in sgx_numa_exit(), when sgx_create_group() is unsuccessful, because the group does not exist.
v7:
* Shorten memory_size to size. The prefix makes the name only longer but does not clarify things more than "size" would.
* Use device_attribute instead of kobj_attribute.
* Use named attribute group instead of creating raw kobject just for the "sgx" subdirectory.
v6:
* Initialize node->size to zero in sgx_setup_epc_section(), when the node is first accessed.
v5
* A new patch based on the discussion on
https://lore.kernel.org/linux-sgx/[email protected]/T/#t
--- Documentation/ABI/stable/sysfs-devices-node | 6 ++++++ arch/Kconfig | 4 ++++ arch/x86/Kconfig | 1 + arch/x86/kernel/cpu/sgx/main.c | 20 ++++++++++++++++++++ arch/x86/kernel/cpu/sgx/sgx.h | 1 + drivers/base/node.c | 13 ++++++++++++- include/linux/numa.h | 4 ++++ 7 files changed, 48 insertions(+), 1 deletion(-)
Documentation/ABI/stable/sysfs-devices-node +6 -0
@@ -176,3 +176,9 @@ Contact: Keith Busch <[email protected]> Description: The cache write policy: 0 for write-back, 1 for write-through, other or unknown. + +What: /sys/devices/system/node/nodeX/x86/sgx_total_bytes +Date: November 2021 +Contact: Jarkko Sakkinen <[email protected]> +Description: + The total amount of SGX physical memory in bytes.
arch/Kconfig +4 -0
@@ -1285,6 +1285,10 @@ config ARCH_HAS_ELFCORE_COMPAT config ARCH_HAS_PARANOID_L1D_FLUSH bool +# Select, if arch has a named attribute group bound to NUMA device nodes. +config HAVE_ARCH_NODE_DEV_GROUP + bool + source "kernel/gcov/Kconfig" source "scripts/gcc-plugins/Kconfig"
arch/x86/Kconfig +1 -0
@@ -266,6 +266,7 @@ config X86 select HAVE_ARCH_KCSAN if X86_64 select X86_FEATURE_NAMES if PROC_FS select PROC_PID_ARCH_STATUS if PROC_FS + select HAVE_ARCH_NODE_DEV_GROUP if X86_SGX imply IMA_SECURE_AND_OR_TRUSTED_BOOT if EFI config INSTRUCTION_DECODER
arch/x86/kernel/cpu/sgx/main.c +20 -0
@@ -714,9 +714,11 @@ static bool __init sgx_page_cache_init(void)spin_lock_init (&sgx_numa_nodes[nid].lock);INIT_LIST_HEAD (&sgx_numa_nodes[nid].free_page_list);node_set (nid, sgx_numa_mask); + sgx_numa_nodes[nid].size =0 ; } sgx_epc_sections[i].node = &sgx_numa_nodes[nid]; + sgx_numa_nodes[nid].size += size; sgx_nr_epc_sections++; }
@@ -790,6 +792,24 @@ int sgx_set_attribute(unsigned long *allowed_attributes, }EXPORT_SYMBOL_GPL (sgx_set_attribute); +#ifdef CONFIG_NUMA +static ssize_t sgx_total_bytes_show (struct device *dev,struct device_attribute *attr,char *buf) +{ +return sysfs_emit (buf,"%lu\n" , sgx_numa_nodes[dev->id].size); +} +static DEVICE_ATTR_RO (sgx_total_bytes); + +static struct attribute *arch_node_dev_attrs[] = { + &dev_attr_sgx_total_bytes.attr, +NULL , +}; + +const struct attribute_group arch_node_dev_group = { + .name ="x86" , + .attrs = arch_node_dev_attrs, +}; +#endif /* CONFIG_NUMA */ +static int __init sgx_init (void ) {int ret;
arch/x86/kernel/cpu/sgx/sgx.h +1 -0
@@ -39,6 +39,7 @@ struct sgx_epc_page {*/ struct sgx_numa_node {struct list_head free_page_list; +unsigned long size;spinlock_t lock; };
drivers/base/node.c +12 -1
@@ -565,7 +565,18 @@ static struct attribute *node_dev_attrs[] = { &dev_attr_vmstat.attr,NULL }; -ATTRIBUTE_GROUPS (node_dev); + +static const struct attribute_group node_dev_group = { + .attrs = node_dev_attrs, +}; + +static const struct attribute_group *node_dev_groups[] = { + &node_dev_group, +#ifdef CONFIG_HAVE_ARCH_NODE_DEV_GROUP + &arch_node_dev_group, +#endif +NULL , +};#ifdef CONFIG_HUGETLBFS /*
include/linux/numa.h +4 -0
@@ -58,4 +58,8 @@ static inline int phys_to_target_node(u64 start) }#endif +#ifdef CONFIG_HAVE_ARCH_NODE_DEV_GROUP +extern const struct attribute_group arch_node_dev_group; +#endif +#endif /* _LINUX_NUMA_H */
Signature · 1 line
2.32.0
Re: [PATCH v12 2/2] x86/sgx: Add an attribute for the amount of SGX memory in a NUMA node
Quoted 5 lines · Jarkko Sakkinen
The amount of SGX memory on the system is determined by the BIOS and it varies wildly between systems. It can be from dozens of MB's on desktops or VM's, up to many GB's on servers. Just like for regular memory, it is sometimes useful to know the amount of usable SGX memory in the system.
Quoted 8 lines
Introduce
CONFIG_HAVE_ARCH_NODE_DEV_GROUPopt-in flag to expose an arch specific attribute group, and add an attribute for the amount of SGX memory in bytes to each NUMA node:
/sys/devices/system/node/nodeX/x86/sgx_total_bytesCc Greg Kroah-Hartman <[email protected]>Signed-off-by Jarkko Sakkinen <[email protected]>