Skip to contentSkip to conversation

ACPI / x86: Add PWM2 on the Xiaomi Mi Pad 2 to the always_present list

PATCH New Hans de Goede 1 participant 2 messages Nov 8, 2021 ACPI

lore
Share & tools
lore
#0 lore raw

cover ACPI / x86: Add PWM2 on the Xiaomi Mi Pad 2 to the always_present list

Hi Rafael,

This patch was previously send as part of a RFC series because I was not sure if there may be needed to be more entries in the always_present list for the Xiaomi Mi Pad 2.

I know have a clear plan forward and we will just need this one entry, so this patch now is ready for merging (for 5.17, though 5.16 is fine too).

Regards,

Hans

Hans de Goede (1):
ACPI / x86: Add PWM2 on the Xiaomi Mi Pad 2 to the always_present list

 drivers/acpi/x86/utils.c | 5 +++++
 1 file changed, 5 insertions(+)
Signature · 1 line
2.31.1
#1 lore raw

PATCH 1/1 ACPI / x86: Add PWM2 on the Xiaomi Mi Pad 2 to the always_present list

The Xiaomi Mi Pad 2 has backlit LEDs behind the capacitive menu, home and back buttons below the screen which are controlled by the PWM2 controller of the CHT SoC. This PWM2 controller gets hidden by the firmware, add it to the always_present_ids table so that we can use the PWM controller to control the backlighting of the buttons.

---
 drivers/acpi/x86/utils.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/acpi/x86/utils.c +5 -0
index f22f23933063..cb988f9b23a1 100644
@@ -58,6 +58,11 @@ static const struct always_present_id always_present_ids[] = {
 	ENTRY("80862289", "2", X86_MATCH(ATOM_AIRMONT), {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X9"),
 		}),
+	/* The Xiaomi Mi Pad 2 uses PWM2 for touchkeys backlight control */
+	ENTRY("80862289", "2", X86_MATCH(ATOM_AIRMONT), {
+		DMI_MATCH(DMI_SYS_VENDOR, "Xiaomi Inc"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Mipad2"),
+	      }),
 	/*
 	 * The INT0002 device is necessary to clear wakeup interrupt sources
 	 * on Cherry Trail devices, without it we get nobody cared IRQ msgs.
Signature · 1 line
2.31.1