arm64: dts: mediatek: mt8516: remove 2 invalid i2c clocks

The two clocks "main-source" and "main-sel" are not present in the driver and not defined in the binding documentation. Remove them as they are not used and not described in the documentation.

Signed-off-by Fabien Parent <[email protected]>

---
  arch/arm64/boot/dts/mediatek/mt8516.dtsi | 27 ++++++------------------
  1 file changed, 6 insertions(+), 21 deletions(-)

arch/arm64/boot/dts/mediatek/mt8516.dtsi +6 -21

index bbe5a1419eff..d1b67c82d761 100644
@@ -345,14 +345,9 @@ i2c0: i2c@11009000 {
  			reg = <0 0x11009000 0 0x90>,
  			      <0 0x11000180 0 0x80>;
  			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>,
-				 <&infracfg CLK_IFR_I2C0_SEL>,
-				 <&topckgen CLK_TOP_I2C0>,
+			clocks = <&topckgen CLK_TOP_I2C0>,
  				 <&topckgen CLK_TOP_APDMA>;
-			clock-names = "main-source",
-				      "main-sel",
-				      "main",
-				      "dma";
+			clock-names = "main", "dma";
  			#address-cells = <1>;
  			#size-cells = <0>;
  			status = "disabled";

@@ -364,14 +359,9 @@ i2c1: i2c@1100a000 {
  			reg = <0 0x1100a000 0 0x90>,
  			      <0 0x11000200 0 0x80>;
  			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>,
-				 <&infracfg CLK_IFR_I2C1_SEL>,
-				 <&topckgen CLK_TOP_I2C1>,
+			clocks = <&topckgen CLK_TOP_I2C1>,
  				 <&topckgen CLK_TOP_APDMA>;
-			clock-names = "main-source",
-				      "main-sel",
-				      "main",
-				      "dma";
+			clock-names = "main", "dma";
  			#address-cells = <1>;
  			#size-cells = <0>;
  			status = "disabled";

@@ -383,14 +373,9 @@ i2c2: i2c@1100b000 {
  			reg = <0 0x1100b000 0 0x90>,
  			      <0 0x11000280 0 0x80>;
  			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>,
-				 <&infracfg CLK_IFR_I2C2_SEL>,
-				 <&topckgen CLK_TOP_I2C2>,
+			clocks = <&topckgen CLK_TOP_I2C2>,
  				 <&topckgen CLK_TOP_APDMA>;
-			clock-names = "main-source",
-				      "main-sel",
-				      "main",
-				      "dma";
+			clock-names = "main", "dma";
  			#address-cells = <1>;
  			#size-cells = <0>;
  			status = "disabled";