pci: add ECAM generic controller support
PATCH 1/1 pci: add ECAM generic controller support
This has been tested with QEMU AArch64 Virt. The default (-M virt,highmem=on) will have two ranges specified in the device trees for memory bars. One 32-bit and the other 64-bit. As barebox can't yet handle 64-bit BARs, the driver will prefer the 32-bit memory region if available. If none is available, consider using -M virt,highmem=off or fixing 64-bit support.
--- drivers/pci/Kconfig | 8 ++ drivers/pci/Makefile | 1 + drivers/pci/pci-ecam-generic.c | 207 +++++++++++++++++++++++++++++++++ 3 files changed, 216 insertions(+) create mode 100644 drivers/pci/pci-ecam-generic.c
drivers/pci/Kconfig +8 -0
@@ -60,6 +60,14 @@ config PCI_EFI depends on EFI_BOOTUP select PCI +config PCI_ECAM_GENERIC + bool "Generic ECAM-based PCI host controller support" + select OF_PCI + select PCI + help + Say Y here if you want to enable support for generic ECAM-based + PCI host controllers, such as the one emulated by QEMU. + endmenu endif
drivers/pci/Makefile +1 -0
@@ -12,3 +12,4 @@ obj-$(CONFIG_PCIE_DW) += pcie-designware.o pcie-designware-host.o obj-$(CONFIG_PCI_IMX6) += pci-imx6.o obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o obj-$(CONFIG_PCI_EFI) += pci-efi.o +obj-$(CONFIG_PCI_ECAM_GENERIC) += pci-ecam-generic.o
drivers/pci/pci-ecam-generic.c new file +207 -0
207 lines not on this page · raw message
Signature · 7 lines
2.33.0 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Quoted 6 lines · Ahmad Fatoum
This has been tested with QEMU AArch64 Virt. The default (-M virt,highmem=on) will have two ranges specified in the device trees for memory bars. One 32-bit and the other 64-bit. As barebox can't yet handle 64-bit BARs, the driver will prefer the 32-bit memory region if available. If none is available, consider using -M virt,highmem=off or fixing 64-bit support.
Looks straight forward. What can I do with it?
Sascha
Signature · 9 lines
Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Hi,
Quoted 9 lines · Sascha Hauer
Quoted 6 lines · Ahmad Fatoum
This has been tested with QEMU AArch64 Virt. The default (-M virt,highmem=on) will have two ranges specified in the device trees for memory bars. One 32-bit and the other 64-bit. As barebox can't yet handle 64-bit BARs, the driver will prefer the 32-bit memory region if available. If none is available, consider using -M virt,highmem=off or fixing 64-bit support.
Looks straight forward. What can I do with it?
I wanted video output with qemu-system-aarch64 for my EFI loader work. The Bochs PCI driver is the only driver I tested so far:
test/emulate.pl qemu_virt64_defconfig -- -device VGA
You'll need some config changes. See the series, I just sent out.
Cheers,
Ahmad
Quoted 3 lines
Sascha
Signature · 9 lines
Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox