Skip to contentSkip to conversation

dt-bindings: Add YAML bindings for NVENC and NVJPG

PATCH In review Jon Hunter 2 participants 3 messages Nov 17, 2021 – Nov 29, 2021

Subsystems (5)
lore
Share & tools
lore

Jon Hunter

author maintainer
#0 lore raw

PATCH v3 1/2 dt-bindings: Add YAML bindings for NVENC and NVJPG

Add YAML device tree bindings for the Tegra NVENC and NVJPG Host1x engines.

---
Changes since V2:
- Fixed indentation
Changes since V1:
- Fixed errors reported by Rob's bot

 .../gpu/host1x/nvidia,tegra210-nvenc.yaml     | 135 ++++++++++++++++++
 .../gpu/host1x/nvidia,tegra210-nvjpg.yaml     |  94 ++++++++++++
 2 files changed, 229 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml
 create mode 100644 Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml
Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml new file +135 -0
new file mode 100644
index 000000000000..e63ae1a00818
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvenc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Device tree binding for NVIDIA Tegra NVENC
+
+description: |
+  NVENC is the hardware video encoder present on NVIDIA Tegra210
+  and newer chips. It is located on the Host1x bus and typically
+  programmed through Host1x channels.
+
+maintainers:
+  - Thierry Reding <[email protected]>
+  - Mikko Perttunen <[email protected]>
+
+properties:
+  $nodename:
+    pattern: "^nvenc@[0-9a-f]*$"
+
+  compatible:
+    enum:
+      - nvidia,tegra210-nvenc
+      - nvidia,tegra186-nvenc
+      - nvidia,tegra194-nvenc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: nvenc
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: nvenc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interconnects:
+    minItems: 2
+    maxItems: 3
+
+  interconnect-names:
+    minItems: 2
+    maxItems: 3
+
+  nvidia,host1x-class:
+    description: |
+      Host1x class of the engine, used to specify the targeted engine
+      when programming the engine through Host1x channels or when
+      configuring engine-specific behavior in Host1x.
+    default: 0x21
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - nvidia,tegra210-nvenc
+            - nvidia,tegra186-nvenc
+    then:
+      properties:
+        interconnects:
+          items:
+            - description: DMA read memory client
+            - description: DMA write memory client
+        interconnect-names:
+          items:
+            - const: dma-mem
+            - const: write
+  - if:
+      properties:
+        compatible:
+          enum:
+            - nvidia,tegra194-nvenc
+    then:
+      properties:
+        interconnects:
+          items:
+            - description: DMA read memory client
+            - description: DMA read 2 memory client
+            - description: DMA write memory client
+        interconnect-names:
+          items:
+            - const: dma-mem
+            - const: read-1
+            - const: write
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    nvenc@154c0000 {
+            compatible = "nvidia,tegra186-nvenc";
+            reg = <0x154c0000 0x40000>;
+            clocks = <&bpmp TEGRA186_CLK_NVENC>;
+            clock-names = "nvenc";
+            resets = <&bpmp TEGRA186_RESET_NVENC>;
+            reset-names = "nvenc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_MPE>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVENCSRD &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVENCSWR &emc>;
+            interconnect-names = "dma-mem", "write";
+            iommus = <&smmu TEGRA186_SID_NVENC>;
+    };
Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml new file +94 -0

94 lines not on this page · raw message

Signature · 1 line
2.25.1
author maintainer
#1 lore raw

PATCH v3 2/2 arm64: tegra: Add NVENC and NVJPG nodes for Tegra186 and Tegra194

Populate the device-tree nodes for NVENC and NVJPG Host1x engines on Tegra186 and Tegra194.

---
Changes since V1:
- None

 arch/arm64/boot/dts/nvidia/tegra186.dtsi | 30 +++++++++++++
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 54 ++++++++++++++++++++++++
 2 files changed, 84 insertions(+)
arch/arm64/boot/dts/nvidia/tegra186.dtsi +30 -0
index 9ac4f0140700..f21cfcaab2a6 100644
@@ -1538,6 +1538,21 @@ vic@15340000 {
 			iommus = <&smmu TEGRA186_SID_VIC>;
 		};
 
+		nvjpg@15380000 {
+			compatible = "nvidia,tegra186-nvjpg";
+			reg = <0x15380000 0x40000>;
+			clocks = <&bpmp TEGRA186_CLK_NVJPG>;
+			clock-names = "nvjpg";
+			resets = <&bpmp TEGRA186_RESET_NVJPG>;
+			reset-names = "nvjpg";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVJPG>;
+			interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVJPGSRD &emc>,
+					<&mc TEGRA186_MEMORY_CLIENT_NVJPGSWR &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA186_SID_NVJPG>;
+		};
+
 		dsib: dsi@15400000 {
 			compatible = "nvidia,tegra186-dsi";
 			reg = <0x15400000 0x10000>;
@@ -1569,6 +1584,21 @@ nvdec@15480000 {
 			iommus = <&smmu TEGRA186_SID_NVDEC>;
 		};
 
+		nvenc@154c0000 {
+			compatible = "nvidia,tegra186-nvenc";
+			reg = <0x154c0000 0x40000>;
+			clocks = <&bpmp TEGRA186_CLK_NVENC>;
+			clock-names = "nvenc";
+			resets = <&bpmp TEGRA186_RESET_NVENC>;
+			reset-names = "nvenc";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_MPE>;
+			interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVENCSRD &emc>,
+					<&mc TEGRA186_MEMORY_CLIENT_NVENCSWR &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA186_SID_NVENC>;
+		};
+
 		sor0: sor@15540000 {
 			compatible = "nvidia,tegra186-sor";
 			reg = <0x15540000 0x10000>;
arch/arm64/boot/dts/nvidia/tegra194.dtsi +54 -0

72 lines not on this page · raw message

Signature · 1 line
2.25.1
maintainer Reviewed-by on v3 1/2
#2 lore raw
In reply to Jon Hunter
Quoted 10 lines · Jon Hunter

Add YAML device tree bindings for the Tegra NVENC and NVJPG Host1x engines.

---
Changes since V2:
- Fixed indentation
Changes since V1:
- Fixed errors reported by Rob's bot

Quoted 6 lines
 .../gpu/host1x/nvidia,tegra210-nvenc.yaml     | 135 ++++++++++++++++++
 .../gpu/host1x/nvidia,tegra210-nvjpg.yaml     |  94 ++++++++++++
 2 files changed, 229 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml
 create mode 100644 Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml