staging: r8188eu: remove unused hal fields
PATCH 1/1 staging: r8188eu: remove unused hal fields
Several HAL related fields are never used or are useless. This removes those fields and any code that is now safe to remove from the field deletion.
The fields that are referenced but are useless are:
* interfaceIndex: only written to, never read.
* CurrentCckTxPwrIdx: only written to, never read.
* CurrentOfdm24GTxPwrIdx: only written to, never read.
* CurrentBW2024GTxPwrIdx: only written to, never read.
* CurrentBW4024GTxPwrIdx: only written to, never read.
* bRDGEnable: never initialized, always false.
--- drivers/staging/r8188eu/hal/rtl8188e_phycfg.c | 13 ------ drivers/staging/r8188eu/hal/usb_halinit.c | 12 ------ .../staging/r8188eu/include/rtl8188e_hal.h | 40 ------------------- 3 files changed, 65 deletions(-)
drivers/staging/r8188eu/hal/rtl8188e_phycfg.c +0 -13
@@ -685,17 +685,6 @@ static void getTxPowerIndex88E(struct adapter *Adapter, u8 channel, u8 *cckPower } } -static void phy_PowerIndexCheck88E (struct adapter *Adapter,u8 channel,u8 *cckPowerLevel, -u8 *ofdmPowerLevel,u8 *BW20PowerLevel,u8 *BW40PowerLevel) -{ -struct hal_data_8188e *pHalData =GET_HAL_DATA (Adapter); - - pHalData->CurrentCckTxPwrIdx = cckPowerLevel[0 ]; - pHalData->CurrentOfdm24GTxPwrIdx = ofdmPowerLevel[0 ]; - pHalData->CurrentBW2024GTxPwrIdx = BW20PowerLevel[0 ]; - pHalData->CurrentBW4024GTxPwrIdx = BW40PowerLevel[0 ]; -} -/*----------------------------------------------------------------------------- * Function: SetTxPowerLevel8190() *
@@ -726,8 +715,6 @@ PHY_SetTxPowerLevel8188E(getTxPowerIndex88E (Adapter, channel, &cckPowerLevel[0 ], &ofdmPowerLevel[0 ], &BW20PowerLevel[0 ], &BW40PowerLevel[0 ]); -phy_PowerIndexCheck88E (Adapter, channel, &cckPowerLevel[0 ], &ofdmPowerLevel[0 ], &BW20PowerLevel[0 ], &BW40PowerLevel[0 ]); -rtl8188e_PHY_RF6052SetCckTxPower (Adapter, &cckPowerLevel[0 ]);rtl8188e_PHY_RF6052SetOFDMTxPower (Adapter, &ofdmPowerLevel[0 ], &BW20PowerLevel[0 ], &BW40PowerLevel[0 ], channel); }
drivers/staging/r8188eu/hal/usb_halinit.c +0 -12
@@ -70,8 +70,6 @@ void rtl8188eu_interface_configure(struct adapter *adapt)else haldata->UsbBulkOutSize =USB_FULL_SPEED_BULK_SIZE ;/* 64 bytes */ - haldata->interfaceIndex = pdvobjpriv->InterfaceNumber; - haldata->UsbTxAggMode =1 ; haldata->UsbTxAggDescNum =0x6 ;/* only 4 bits */
@@ -400,13 +398,6 @@ static void _InitEDCA(struct adapter *Adapter)rtw_write32 (Adapter,REG_EDCA_VO_PARAM ,0x002FA226 ); } -static void _InitRDGSetting (struct adapter *Adapter) -{ -rtw_write8 (Adapter,REG_RD_CTRL ,0xFF ); -rtw_write16 (Adapter,REG_RD_NAV_NXT ,0x200 ); -rtw_write8 (Adapter,REG_RD_RESP_PKT_TH ,0x05 ); -} -static void _InitRetryFunction (struct adapter *Adapter) {u8 value8;
@@ -743,9 +734,6 @@ u32 rtl8188eu_hal_init(struct adapter *Adapter) value16 |= (MACTXEN |MACRXEN );rtw_write8 (Adapter,REG_CR , value16); -if (haldata->bRDGEnable) -_InitRDGSetting (Adapter); -/* Enable TX Report */ /* Enable Tx Report Timer */ value8 =rtw_read8 (Adapter,REG_TX_RPT_CTRL );
drivers/staging/r8188eu/include/rtl8188e_hal.h +0 -40
@@ -112,21 +112,6 @@ enum usb_rx_agg_mode {#include "HalVerDef.h" #include "hal_com.h" -/* Channel Plan */ -enum ChannelPlan { -CHPL_FCC =0 , -CHPL_IC =1 , -CHPL_ETSI =2 , -CHPL_SPA =3 , -CHPL_FRANCE =4 , -CHPL_MKK =5 , -CHPL_MKK1 =6 , -CHPL_ISRAEL =7 , -CHPL_TELEC =8 , -CHPL_GLOBAL =9 , -CHPL_WORLD =10 , -}; -struct txpowerinfo24g {u8 IndexCCK_Base[RF_PATH_MAX ][MAX_CHNL_GROUP_24G ];u8 IndexBW40_Base[RF_PATH_MAX ][MAX_CHNL_GROUP_24G ];
@@ -206,18 +191,7 @@ struct hal_data_8188e {u8 PwrGroupHT20[RF_PATH_MAX ][CHANNEL_MAX_NUMBER ];u8 PwrGroupHT40[RF_PATH_MAX ][CHANNEL_MAX_NUMBER ]; -u8 LegacyHTTxPowerDiff;/* Legacy to HT rate power diff */ -/* The current Tx Power Level */ -u8 CurrentCckTxPwrIdx; -u8 CurrentOfdm24GTxPwrIdx; -u8 CurrentBW2024GTxPwrIdx; -u8 CurrentBW4024GTxPwrIdx; -/* Read/write are allow for following hardware information variables */ -u8 framesync; -u32 framesyncC34; -u8 framesyncMonitor; -u8 DefaultInitialGain[4 ];u8 pwrGroupCnt;u32 MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP ][16 ];u32 CCKTxPowerLevelOriginalOffset;
@@ -237,9 +211,6 @@ struct hal_data_8188e {u32 RfRegChnlVal[2 ]; -/* RDG enable */ -bool bRDGEnable; -/* for host message to fw */ u8 LastHMEBoxNum;
@@ -260,23 +231,12 @@ struct hal_data_8188e {u8 FwRsvdPageStartOffset;/* Reserve page start offset except * beacon in TxQ. */ -/* 2010/08/09 MH Add CU power down mode. */ -bool pwrdown; - -/* Add for dual MAC 0--Mac0 1--Mac1 */ -u32 interfaceIndex; -u8 OutEpQueueSel;u8 OutEpNumber;/* Add for USB aggreation mode dynamic shceme. */ bool UsbRxHighSpeedMode; -/* 2010/11/22 MH Add for slim combo debug mode selective. */ -/* This is used for fix the drawback of CU TSMC-A/UMC-A cut. -* HW auto suspend ability. Close BT clock. */ -bool SlimComboDbg; -u16 EfuseUsedBytes;struct P2P_PS_Offload_t p2p_ps_offload;
Signature · 1 line
2.25.1
Greg KH
maintainerQuoted 11 lines · Zameer Manji
Several HAL related fields are never used or are useless. This removes those fields and any code that is now safe to remove from the field deletion.
The fields that are referenced but are useless are:
* interfaceIndex: only written to, never read.
* CurrentCckTxPwrIdx: only written to, never read.
* CurrentOfdm24GTxPwrIdx: only written to, never read.
* CurrentBW2024GTxPwrIdx: only written to, never read.
* CurrentBW4024GTxPwrIdx: only written to, never read.
* bRDGEnable: never initialized, always false.
Please split this up into one-patch-per-thing, this is very hard to read and verify that this is all correct when it is lumped together.
Make it a patch series and resend please.
thanks,
greg k-h