PCI Aardvark controller fixes
Subsystems (3)
cover PCI Aardvark controller fixes
Hello Lorenzo, Bjorn,
here are two fixes for pci-aardvark controller.
Marek
Marek Behún (1):
Revert "PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated
bridge"
Pali Rohár (1):
PCI: aardvark: Fix checking for MEM resource type
drivers/pci/controller/pci-aardvark.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-)
Signature · 1 line
2.32.0
PATCH 1/2 PCI: aardvark: Fix checking for MEM resource type
From: Pali Rohár <[email protected]>
IORESOURCE_MEM_64 is not type but type flag. Remove incorrect check for type IORESOURCE_MEM_64.
--- drivers/pci/controller/pci-aardvark.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/pci/controller/pci-aardvark.c +2 -4
@@ -1544,8 +1544,7 @@ static int advk_pcie_probe(struct platform_device *pdev)* only PIO for issuing configuration transfers which does * not use PCIe window configuration. */ -if (type !=IORESOURCE_MEM && type !=IORESOURCE_MEM_64 && - type !=IORESOURCE_IO ) +if (type !=IORESOURCE_MEM && type !=IORESOURCE_IO )continue ;/*
@@ -1553,8 +1552,7 @@ static int advk_pcie_probe(struct platform_device *pdev)* configuration is set to transparent memory access so it * does not need window configuration. */ -if ((type ==IORESOURCE_MEM || type ==IORESOURCE_MEM_64 ) && - entry->offset ==0 ) +if (type ==IORESOURCE_MEM && entry->offset ==0 )continue ;/*
Signature · 1 line
2.32.0
PATCH 2/2 Revert "PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge"
In reply to Marek BehúnThis reverts commit 239edf686c14a9ff926dec2f350289ed7adfefe2.
PCI Bridge which represents aardvark's PCIe Root Port has Expansion ROM Base Address register at offset 0x30, but its meaning is different than PCI's Expansion ROM BAR register, although the layout is the same. (This is why we thought it does the same thing.)
First: there is no ROM (or part of BootROM) in the A3720 SOC dedicated for PCIe Root Port (or controller in RC mode) containing executable code that would initialize the Root Port, suitable for execution in bootloader (this is how Expansion ROM BAR is used on x86).
Second: in A3720 spec the register (address D0070030) is not documented at all for Root Complex mode, but similar to other BAR registers, it has an "entangled partner" in register D0075920, which does address translation for the BAR in D0070030:
- the BAR register sets the address from the view of PCIe bus
- the translation register sets the address from the view of the CPU
The other BAR registers also have this entangled partner, and they can be used to:
- in RC mode: address-checking on the receive side of the RC (they can define address ranges for memory accesses from remote Endpoints to the RC)
- in Endpoint mode: allow the remote CPU to access memory on A3720
The Expansion ROM BAR has only the Endpoint part documented, but from the similarities we think that it can also be used in RC mode in that way.
So either Expansion ROM BAR has different meaning (if the hypothesis above is true), or we don't know it's meaning (since it is not documented for RC mode).
Remove the register from the emulated bridge accessing functions.
--- drivers/pci/controller/pci-aardvark.c | 9 --------- 1 file changed, 9 deletions(-)
drivers/pci/controller/pci-aardvark.c +0 -9
@@ -32,7 +32,6 @@#define PCIE_CORE_DEV_ID_REG 0x0#define PCIE_CORE_CMD_STATUS_REG 0x4#define PCIE_CORE_DEV_REV_REG 0x8 -#define PCIE_CORE_EXP_ROM_BAR_REG 0x30#define PCIE_CORE_PCIEXP_CAP 0xc0#define PCIE_CORE_ERR_CAPCTL_REG 0x118#define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX BIT(5)
@@ -774,10 +773,6 @@ advk_pci_bridge_emul_base_conf_read(struct pci_bridge_emul *bridge, *value =advk_readl (pcie,PCIE_CORE_CMD_STATUS_REG );return PCI_BRIDGE_EMUL_HANDLED ; -case PCI_ROM_ADDRESS1 : - *value =advk_readl (pcie,PCIE_CORE_EXP_ROM_BAR_REG ); -return PCI_BRIDGE_EMUL_HANDLED ; -case PCI_INTERRUPT_LINE : {/* * From the whole 32bit register we support reading from HW only
@@ -810,10 +805,6 @@ advk_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,advk_writel (pcie, new,PCIE_CORE_CMD_STATUS_REG );break ; -case PCI_ROM_ADDRESS1 : -advk_writel (pcie, new,PCIE_CORE_EXP_ROM_BAR_REG ); -break ; -case PCI_INTERRUPT_LINE :if (mask & (PCI_BRIDGE_CTL_BUS_RESET <<16 )) {u32 val =advk_readl (pcie,PCIE_CORE_CTRL1_REG );
Signature · 1 line
2.32.0
Re: [PATCH pci-fixes 2/2] Revert "PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge"
Quoted 34 lines · Marek Behún
This reverts commit
239edf686c14a9ff926dec2f350289ed7adfefe2.PCI Bridge which represents aardvark's PCIe Root Port has Expansion ROM Base Address register at offset
0x30, but its meaning is different than PCI's Expansion ROM BAR register, although the layout is the same. (This is why we thought it does the same thing.)First: there is no ROM (or part of BootROM) in the A3720 SOC dedicated for PCIe Root Port (or controller in RC mode) containing executable code that would initialize the Root Port, suitable for execution in bootloader (this is how Expansion ROM BAR is used on x86).
Second: in A3720 spec the register (address D0070030) is not documented at all for Root Complex mode, but similar to other BAR registers, it has an "entangled partner" in register D0075920, which does address translation for the BAR in D0070030:
- the BAR register sets the address from the view of PCIe bus
- the translation register sets the address from the view of the CPUThe other BAR registers also have this entangled partner, and they can be used to:
- in RC mode: address-checking on the receive side of the RC (they can define address ranges for memory accesses from remote Endpoints to the RC)
- in Endpoint mode: allow the remote CPU to access memory on A3720The Expansion ROM BAR has only the Endpoint part documented, but from the similarities we think that it can also be used in RC mode in that way.
So either Expansion ROM BAR has different meaning (if the hypothesis above is true), or we don't know it's meaning (since it is not documented for RC mode).
Quoted 7 lines
Remove the register from the emulated bridge accessing functions.
Fixes 239edf686c14 ("PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge")Signed-off-by Marek Behún <[email protected]>--- drivers/pci/controller/pci-aardvark.c | 9 --------- 1 file changed, 9 deletions(-)
Bjorn,
this reverts a commit we merged the last merge window so it is a candidate for one of the upcoming -rcX.
Thanks,
Lorenzo
Quoted 37 lines
drivers/pci/controller/pci-aardvark.c +0
-9@@ -32,7 +32,6 @@#define PCIE_CORE_DEV_ID_REG 0x0#define PCIE_CORE_CMD_STATUS_REG 0x4#define PCIE_CORE_DEV_REV_REG 0x8 -#define PCIE_CORE_EXP_ROM_BAR_REG 0x30#define PCIE_CORE_PCIEXP_CAP 0xc0#define PCIE_CORE_ERR_CAPCTL_REG 0x118#define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX BIT(5)@@ -774,10 +773,6 @@ advk_pci_bridge_emul_base_conf_read(struct pci_bridge_emul *bridge, *value =advk_readl (pcie,PCIE_CORE_CMD_STATUS_REG );return PCI_BRIDGE_EMUL_HANDLED ; -case PCI_ROM_ADDRESS1 : - *value =advk_readl (pcie,PCIE_CORE_EXP_ROM_BAR_REG ); -return PCI_BRIDGE_EMUL_HANDLED ; -case PCI_INTERRUPT_LINE : {/* * From the whole 32bit register we support reading from HW only @@ -810,10 +805,6 @@ advk_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,advk_writel (pcie, new,PCIE_CORE_CMD_STATUS_REG );break ; -case PCI_ROM_ADDRESS1 : -advk_writel (pcie, new,PCIE_CORE_EXP_ROM_BAR_REG ); -break ; -case PCI_INTERRUPT_LINE :if (mask & (PCI_BRIDGE_CTL_BUS_RESET <<16 )) {u32 val =advk_readl (pcie,PCIE_CORE_CTRL1_REG );Signature · 1 line
2.32.0
Re: [PATCH pci-fixes 2/2] Revert "PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge"
In reply to Marek BehúnQuoted 30 lines · On Thursday 25 November 2021 17:01:48 Marek Behún wrote:
This reverts commit
239edf686c14a9ff926dec2f350289ed7adfefe2.PCI Bridge which represents aardvark's PCIe Root Port has Expansion ROM Base Address register at offset
0x30, but its meaning is different than PCI's Expansion ROM BAR register, although the layout is the same. (This is why we thought it does the same thing.)First: there is no ROM (or part of BootROM) in the A3720 SOC dedicated for PCIe Root Port (or controller in RC mode) containing executable code that would initialize the Root Port, suitable for execution in bootloader (this is how Expansion ROM BAR is used on x86).
Second: in A3720 spec the register (address D0070030) is not documented at all for Root Complex mode, but similar to other BAR registers, it has an "entangled partner" in register D0075920, which does address translation for the BAR in D0070030:
- the BAR register sets the address from the view of PCIe bus
- the translation register sets the address from the view of the CPUThe other BAR registers also have this entangled partner, and they can be used to:
- in RC mode: address-checking on the receive side of the RC (they can define address ranges for memory accesses from remote Endpoints to the RC)
- in Endpoint mode: allow the remote CPU to access memory on A3720The Expansion ROM BAR has only the Endpoint part documented, but from the similarities we think that it can also be used in RC mode in that way.
Quoted 8 lines
So either Expansion ROM BAR has different meaning (if the hypothesis above is true), or we don't know it's meaning (since it is not documented for RC mode).
Remove the register from the emulated bridge accessing functions.
Fixes 239edf686c14 ("PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge")Signed-off-by Marek Behún <[email protected]>
Seems that there is missing my tag, so I'm adding:
It is really a trap if device has register names and offsets same as in PCIe spec, also syntax/content of registers is same, but then semantic, meaning and usage is totally different.
Quoted 41 lines
--- drivers/pci/controller/pci-aardvark.c | 9 --------- 1 file changed, 9 deletions(-)drivers/pci/controller/pci-aardvark.c +0
-9@@ -32,7 +32,6 @@#define PCIE_CORE_DEV_ID_REG 0x0#define PCIE_CORE_CMD_STATUS_REG 0x4#define PCIE_CORE_DEV_REV_REG 0x8 -#define PCIE_CORE_EXP_ROM_BAR_REG 0x30#define PCIE_CORE_PCIEXP_CAP 0xc0#define PCIE_CORE_ERR_CAPCTL_REG 0x118#define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX BIT(5)@@ -774,10 +773,6 @@ advk_pci_bridge_emul_base_conf_read(struct pci_bridge_emul *bridge, *value =advk_readl (pcie,PCIE_CORE_CMD_STATUS_REG );return PCI_BRIDGE_EMUL_HANDLED ; -case PCI_ROM_ADDRESS1 : - *value =advk_readl (pcie,PCIE_CORE_EXP_ROM_BAR_REG ); -return PCI_BRIDGE_EMUL_HANDLED ; -case PCI_INTERRUPT_LINE : {/* * From the whole 32bit register we support reading from HW only @@ -810,10 +805,6 @@ advk_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,advk_writel (pcie, new,PCIE_CORE_CMD_STATUS_REG );break ; -case PCI_ROM_ADDRESS1 : -advk_writel (pcie, new,PCIE_CORE_EXP_ROM_BAR_REG ); -break ; -case PCI_INTERRUPT_LINE :if (mask & (PCI_BRIDGE_CTL_BUS_RESET <<16 )) {u32 val =advk_readl (pcie,PCIE_CORE_CTRL1_REG );Signature · 1 line
2.32.0
Re: [PATCH pci-fixes 2/2] Revert "PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge"
In reply to Lorenzo PieralisiQuoted 43 lines · Lorenzo Pieralisi
Quoted 34 lines · Marek Behún
This reverts commit
239edf686c14a9ff926dec2f350289ed7adfefe2.PCI Bridge which represents aardvark's PCIe Root Port has Expansion ROM Base Address register at offset
0x30, but its meaning is different than PCI's Expansion ROM BAR register, although the layout is the same. (This is why we thought it does the same thing.)First: there is no ROM (or part of BootROM) in the A3720 SOC dedicated for PCIe Root Port (or controller in RC mode) containing executable code that would initialize the Root Port, suitable for execution in bootloader (this is how Expansion ROM BAR is used on x86).
Second: in A3720 spec the register (address D0070030) is not documented at all for Root Complex mode, but similar to other BAR registers, it has an "entangled partner" in register D0075920, which does address translation for the BAR in D0070030:
- the BAR register sets the address from the view of PCIe bus
- the translation register sets the address from the view of the CPUThe other BAR registers also have this entangled partner, and they can be used to:
- in RC mode: address-checking on the receive side of the RC (they can define address ranges for memory accesses from remote Endpoints to the RC)
- in Endpoint mode: allow the remote CPU to access memory on A3720The Expansion ROM BAR has only the Endpoint part documented, but from the similarities we think that it can also be used in RC mode in that way.
So either Expansion ROM BAR has different meaning (if the hypothesis above is true), or we don't know it's meaning (since it is not documented for RC mode).
Quoted 7 lines
Remove the register from the emulated bridge accessing functions.
Fixes 239edf686c14 ("PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge")Signed-off-by Marek Behún <[email protected]>--- drivers/pci/controller/pci-aardvark.c | 9 --------- 1 file changed, 9 deletions(-)
Quoted 4 lines
Bjorn,
this reverts a commit we merged the last merge window so it is a candidate for one of the upcoming -rcX.
Sure, happy to apply the revert.
What problem does the revert fix? I assume 239edf686c14 ("PCI:
aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge") broke something, but the commit log for the revert doesn't say *what*. How would one notice that something broke?
Quoted 37 lines
Quoted 37 lines
drivers/pci/controller/pci-aardvark.c +0
-9@@ -32,7 +32,6 @@#define PCIE_CORE_DEV_ID_REG 0x0#define PCIE_CORE_CMD_STATUS_REG 0x4#define PCIE_CORE_DEV_REV_REG 0x8 -#define PCIE_CORE_EXP_ROM_BAR_REG 0x30#define PCIE_CORE_PCIEXP_CAP 0xc0#define PCIE_CORE_ERR_CAPCTL_REG 0x118#define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX BIT(5)@@ -774,10 +773,6 @@ advk_pci_bridge_emul_base_conf_read(struct pci_bridge_emul *bridge, *value =advk_readl (pcie,PCIE_CORE_CMD_STATUS_REG );return PCI_BRIDGE_EMUL_HANDLED ; -case PCI_ROM_ADDRESS1 : - *value =advk_readl (pcie,PCIE_CORE_EXP_ROM_BAR_REG ); -return PCI_BRIDGE_EMUL_HANDLED ; -case PCI_INTERRUPT_LINE : {/* * From the whole 32bit register we support reading from HW only @@ -810,10 +805,6 @@ advk_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,advk_writel (pcie, new,PCIE_CORE_CMD_STATUS_REG );break ; -case PCI_ROM_ADDRESS1 : -advk_writel (pcie, new,PCIE_CORE_EXP_ROM_BAR_REG ); -break ; -case PCI_INTERRUPT_LINE :if (mask & (PCI_BRIDGE_CTL_BUS_RESET <<16 )) {u32 val =advk_readl (pcie,PCIE_CORE_CTRL1_REG );Signature · 1 line
2.32.0
Re: [PATCH pci-fixes 2/2] Revert "PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge"
Quoted 49 lines · On Tue, 30 Nov 2021 19:53:08 -0600 Bjorn Helgaas <[email protected]> wrote:
Quoted 43 lines · Lorenzo Pieralisi
Quoted 34 lines · Marek Behún
This reverts commit
239edf686c14a9ff926dec2f350289ed7adfefe2.PCI Bridge which represents aardvark's PCIe Root Port has Expansion ROM Base Address register at offset
0x30, but its meaning is different than PCI's Expansion ROM BAR register, although the layout is the same. (This is why we thought it does the same thing.)First: there is no ROM (or part of BootROM) in the A3720 SOC dedicated for PCIe Root Port (or controller in RC mode) containing executable code that would initialize the Root Port, suitable for execution in bootloader (this is how Expansion ROM BAR is used on x86).
Second: in A3720 spec the register (address D0070030) is not documented at all for Root Complex mode, but similar to other BAR registers, it has an "entangled partner" in register D0075920, which does address translation for the BAR in D0070030:
- the BAR register sets the address from the view of PCIe bus
- the translation register sets the address from the view of the CPUThe other BAR registers also have this entangled partner, and they can be used to:
- in RC mode: address-checking on the receive side of the RC (they can define address ranges for memory accesses from remote Endpoints to the RC)
- in Endpoint mode: allow the remote CPU to access memory on A3720The Expansion ROM BAR has only the Endpoint part documented, but from the similarities we think that it can also be used in RC mode in that way.
So either Expansion ROM BAR has different meaning (if the hypothesis above is true), or we don't know it's meaning (since it is not documented for RC mode).
Quoted 7 lines
Remove the register from the emulated bridge accessing functions.
Fixes 239edf686c14 ("PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge")Signed-off-by Marek Behún <[email protected]>--- drivers/pci/controller/pci-aardvark.c | 9 --------- 1 file changed, 9 deletions(-)Quoted 4 lines
Bjorn,
this reverts a commit we merged the last merge window so it is a candidate for one of the upcoming -rcX.
Quoted 6 lines
Sure, happy to apply the revert.
What problem does the revert fix? I assume
239edf686c14("PCI:
aardvark: Fix support forPCI_ROM_ADDRESS1on emulated bridge") broke something, but the commit log for the revert doesn't say *what*. How would one notice that something broke?
Hello Bjorn,
It doesn't break any real functionality that I know of, although it might, since the register is read pci/probe.c pci_setup_device() (pci_read_bases()).
But allowing the access to the register when it has different meaning is wrong in a similar sense that a memory leak is wrong (a memory leak also does not necessarily cause real problems, if it is small, but still we should fix it).
Marek
Re: [PATCH pci-fixes 2/2] Revert "PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge"
Quoted 61 lines · Marek Behún
Quoted 49 lines · On Tue, 30 Nov 2021 19:53:08 -0600 Bjorn Helgaas <[email protected]> wrote:
Quoted 43 lines · Lorenzo Pieralisi
Quoted 34 lines · Marek Behún
This reverts commit
239edf686c14a9ff926dec2f350289ed7adfefe2.PCI Bridge which represents aardvark's PCIe Root Port has Expansion ROM Base Address register at offset
0x30, but its meaning is different than PCI's Expansion ROM BAR register, although the layout is the same. (This is why we thought it does the same thing.)First: there is no ROM (or part of BootROM) in the A3720 SOC dedicated for PCIe Root Port (or controller in RC mode) containing executable code that would initialize the Root Port, suitable for execution in bootloader (this is how Expansion ROM BAR is used on x86).
Second: in A3720 spec the register (address D0070030) is not documented at all for Root Complex mode, but similar to other BAR registers, it has an "entangled partner" in register D0075920, which does address translation for the BAR in D0070030:
- the BAR register sets the address from the view of PCIe bus
- the translation register sets the address from the view of the CPUThe other BAR registers also have this entangled partner, and they can be used to:
- in RC mode: address-checking on the receive side of the RC (they can define address ranges for memory accesses from remote Endpoints to the RC)
- in Endpoint mode: allow the remote CPU to access memory on A3720The Expansion ROM BAR has only the Endpoint part documented, but from the similarities we think that it can also be used in RC mode in that way.
So either Expansion ROM BAR has different meaning (if the hypothesis above is true), or we don't know it's meaning (since it is not documented for RC mode).
Quoted 7 lines
Remove the register from the emulated bridge accessing functions.
Fixes 239edf686c14 ("PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge")Signed-off-by Marek Behún <[email protected]>--- drivers/pci/controller/pci-aardvark.c | 9 --------- 1 file changed, 9 deletions(-)Quoted 4 lines
Bjorn,
this reverts a commit we merged the last merge window so it is a candidate for one of the upcoming -rcX.
Quoted 6 lines
Sure, happy to apply the revert.
What problem does the revert fix? I assume
239edf686c14("PCI:
aardvark: Fix support forPCI_ROM_ADDRESS1on emulated bridge") broke something, but the commit log for the revert doesn't say *what*. How would one notice that something broke?Hello Bjorn,
Quoted 8 lines
It doesn't break any real functionality that I know of, although it might, since the register is read
pci/probe.cpci_setup_device()(pci_read_bases()).But allowing the access to the register when it has different meaning is wrong in a similar sense that a memory leak is wrong (a memory leak also does not necessarily cause real problems, if it is small, but still we should fix it).
What is the new information that led you to conclude that 239edf686c14 is wrong? Apparently you originally thought the bridge had a ROM BAR, but later decided it didn't, based on *something*? New observation? New understanding of the spec?
I need to be able to explain why we should merge this after the merge window, and I'm having a hard time extracting that from the commit log.
Bjorn
Re: [PATCH pci-fixes 2/2] Revert "PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge"
Quoted 71 lines · On Wed, 1 Dec 2021 06:35:18 -0600 Bjorn Helgaas <[email protected]> wrote:
Quoted 61 lines · Marek Behún
Quoted 49 lines · On Tue, 30 Nov 2021 19:53:08 -0600 Bjorn Helgaas <[email protected]> wrote:
Quoted 43 lines · Lorenzo Pieralisi
Quoted 34 lines · Marek Behún
This reverts commit
239edf686c14a9ff926dec2f350289ed7adfefe2.PCI Bridge which represents aardvark's PCIe Root Port has Expansion ROM Base Address register at offset
0x30, but its meaning is different than PCI's Expansion ROM BAR register, although the layout is the same. (This is why we thought it does the same thing.)First: there is no ROM (or part of BootROM) in the A3720 SOC dedicated for PCIe Root Port (or controller in RC mode) containing executable code that would initialize the Root Port, suitable for execution in bootloader (this is how Expansion ROM BAR is used on x86).
Second: in A3720 spec the register (address D0070030) is not documented at all for Root Complex mode, but similar to other BAR registers, it has an "entangled partner" in register D0075920, which does address translation for the BAR in D0070030:
- the BAR register sets the address from the view of PCIe bus
- the translation register sets the address from the view of the CPUThe other BAR registers also have this entangled partner, and they can be used to:
- in RC mode: address-checking on the receive side of the RC (they can define address ranges for memory accesses from remote Endpoints to the RC)
- in Endpoint mode: allow the remote CPU to access memory on A3720The Expansion ROM BAR has only the Endpoint part documented, but from the similarities we think that it can also be used in RC mode in that way.
So either Expansion ROM BAR has different meaning (if the hypothesis above is true), or we don't know it's meaning (since it is not documented for RC mode).
Quoted 7 lines
Remove the register from the emulated bridge accessing functions.
Fixes 239edf686c14 ("PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge")Signed-off-by Marek Behún <[email protected]>--- drivers/pci/controller/pci-aardvark.c | 9 --------- 1 file changed, 9 deletions(-)Quoted 4 lines
Bjorn,
this reverts a commit we merged the last merge window so it is a candidate for one of the upcoming -rcX.
Quoted 6 lines
Sure, happy to apply the revert.
What problem does the revert fix? I assume
239edf686c14("PCI:
aardvark: Fix support forPCI_ROM_ADDRESS1on emulated bridge") broke something, but the commit log for the revert doesn't say *what*. How would one notice that something broke?Hello Bjorn,
Quoted 8 lines
It doesn't break any real functionality that I know of, although it might, since the register is read
pci/probe.cpci_setup_device()(pci_read_bases()).But allowing the access to the register when it has different meaning is wrong in a similar sense that a memory leak is wrong (a memory leak also does not necessarily cause real problems, if it is small, but still we should fix it).
Quoted 4 lines
What is the new information that led you to conclude that
239edf686c14is wrong? Apparently you originally thought the bridge had a ROM BAR, but later decided it didn't, based on *something*? New observation? New understanding of the spec?
Hi Bjorn,
The new observation is that although the register is defined in register list (together with it's layour), it is not documented in RC mode, although other BAR registers are (and their meaning is something different from standard BAR registers in RC mode). Combined with the fact that there is no ROM containing executable code in the SOC (which we knew even before, but thought that maybe it could be somehow also implemented), we concluded that this register has different meaning from standard Expansion ROM BAR.
Marek
Quoted 5 lines
I need to be able to explain why we should merge this after the merge window, and I'm having a hard time extracting that from the commit log.
Bjorn
Bjorn Helgaas
AppliedRe: [PATCH pci-fixes 2/2] Revert "PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge"
Quoted 81 lines · Marek Behún
Quoted 71 lines · On Wed, 1 Dec 2021 06:35:18 -0600 Bjorn Helgaas <[email protected]> wrote:
Quoted 61 lines · Marek Behún
Quoted 49 lines · On Tue, 30 Nov 2021 19:53:08 -0600 Bjorn Helgaas <[email protected]> wrote:
Quoted 43 lines · Lorenzo Pieralisi
Quoted 34 lines · Marek Behún
This reverts commit
239edf686c14a9ff926dec2f350289ed7adfefe2.PCI Bridge which represents aardvark's PCIe Root Port has Expansion ROM Base Address register at offset
0x30, but its meaning is different than PCI's Expansion ROM BAR register, although the layout is the same. (This is why we thought it does the same thing.)First: there is no ROM (or part of BootROM) in the A3720 SOC dedicated for PCIe Root Port (or controller in RC mode) containing executable code that would initialize the Root Port, suitable for execution in bootloader (this is how Expansion ROM BAR is used on x86).
Second: in A3720 spec the register (address D0070030) is not documented at all for Root Complex mode, but similar to other BAR registers, it has an "entangled partner" in register D0075920, which does address translation for the BAR in D0070030:
- the BAR register sets the address from the view of PCIe bus
- the translation register sets the address from the view of the CPUThe other BAR registers also have this entangled partner, and they can be used to:
- in RC mode: address-checking on the receive side of the RC (they can define address ranges for memory accesses from remote Endpoints to the RC)
- in Endpoint mode: allow the remote CPU to access memory on A3720The Expansion ROM BAR has only the Endpoint part documented, but from the similarities we think that it can also be used in RC mode in that way.
So either Expansion ROM BAR has different meaning (if the hypothesis above is true), or we don't know it's meaning (since it is not documented for RC mode).
Quoted 7 lines
Remove the register from the emulated bridge accessing functions.
Fixes 239edf686c14 ("PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge")Signed-off-by Marek Behún <[email protected]>--- drivers/pci/controller/pci-aardvark.c | 9 --------- 1 file changed, 9 deletions(-)Quoted 4 lines
Bjorn,
this reverts a commit we merged the last merge window so it is a candidate for one of the upcoming -rcX.
Quoted 6 lines
Sure, happy to apply the revert.
What problem does the revert fix? I assume
239edf686c14("PCI:
aardvark: Fix support forPCI_ROM_ADDRESS1on emulated bridge") broke something, but the commit log for the revert doesn't say *what*. How would one notice that something broke?Hello Bjorn,
Quoted 8 lines
It doesn't break any real functionality that I know of, although it might, since the register is read
pci/probe.cpci_setup_device()(pci_read_bases()).But allowing the access to the register when it has different meaning is wrong in a similar sense that a memory leak is wrong (a memory leak also does not necessarily cause real problems, if it is small, but still we should fix it).
Quoted 4 lines
What is the new information that led you to conclude that
239edf686c14is wrong? Apparently you originally thought the bridge had a ROM BAR, but later decided it didn't, based on *something*? New observation? New understanding of the spec?Hi Bjorn,
Quoted 8 lines
The new observation is that although the register is defined in register list (together with it's layour), it is not documented in RC mode, although other BAR registers are (and their meaning is something different from standard BAR registers in RC mode). Combined with the fact that there is no ROM containing executable code in the SOC (which we knew even before, but thought that maybe it could be somehow also implemented), we concluded that this register has different meaning from standard Expansion ROM BAR.
Thanks, applied to for-linus for v5.16!
Bjorn
Bjorn Helgaas
AppliedRe: [PATCH pci-fixes 2/2] Revert "PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge"
In reply to Marek BehúnQuoted 30 lines · Marek Behún
This reverts commit
239edf686c14a9ff926dec2f350289ed7adfefe2.PCI Bridge which represents aardvark's PCIe Root Port has Expansion ROM Base Address register at offset
0x30, but its meaning is different than PCI's Expansion ROM BAR register, although the layout is the same. (This is why we thought it does the same thing.)First: there is no ROM (or part of BootROM) in the A3720 SOC dedicated for PCIe Root Port (or controller in RC mode) containing executable code that would initialize the Root Port, suitable for execution in bootloader (this is how Expansion ROM BAR is used on x86).
Second: in A3720 spec the register (address D0070030) is not documented at all for Root Complex mode, but similar to other BAR registers, it has an "entangled partner" in register D0075920, which does address translation for the BAR in D0070030:
- the BAR register sets the address from the view of PCIe bus
- the translation register sets the address from the view of the CPUThe other BAR registers also have this entangled partner, and they can be used to:
- in RC mode: address-checking on the receive side of the RC (they can define address ranges for memory accesses from remote Endpoints to the RC)
- in Endpoint mode: allow the remote CPU to access memory on A3720The Expansion ROM BAR has only the Endpoint part documented, but from the similarities we think that it can also be used in RC mode in that way.
Quoted 8 lines
So either Expansion ROM BAR has different meaning (if the hypothesis above is true), or we don't know it's meaning (since it is not documented for RC mode).
Remove the register from the emulated bridge accessing functions.
Fixes 239edf686c14 ("PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge")Signed-off-by Marek Behún <[email protected]>
Applied this patch (2/2) to for-linus for v5.16, thanks!
Quoted 41 lines
--- drivers/pci/controller/pci-aardvark.c | 9 --------- 1 file changed, 9 deletions(-)drivers/pci/controller/pci-aardvark.c +0
-9@@ -32,7 +32,6 @@#define PCIE_CORE_DEV_ID_REG 0x0#define PCIE_CORE_CMD_STATUS_REG 0x4#define PCIE_CORE_DEV_REV_REG 0x8 -#define PCIE_CORE_EXP_ROM_BAR_REG 0x30#define PCIE_CORE_PCIEXP_CAP 0xc0#define PCIE_CORE_ERR_CAPCTL_REG 0x118#define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX BIT(5)@@ -774,10 +773,6 @@ advk_pci_bridge_emul_base_conf_read(struct pci_bridge_emul *bridge, *value =advk_readl (pcie,PCIE_CORE_CMD_STATUS_REG );return PCI_BRIDGE_EMUL_HANDLED ; -case PCI_ROM_ADDRESS1 : - *value =advk_readl (pcie,PCIE_CORE_EXP_ROM_BAR_REG ); -return PCI_BRIDGE_EMUL_HANDLED ; -case PCI_INTERRUPT_LINE : {/* * From the whole 32bit register we support reading from HW only @@ -810,10 +805,6 @@ advk_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,advk_writel (pcie, new,PCIE_CORE_CMD_STATUS_REG );break ; -case PCI_ROM_ADDRESS1 : -advk_writel (pcie, new,PCIE_CORE_EXP_ROM_BAR_REG ); -break ; -case PCI_INTERRUPT_LINE :if (mask & (PCI_BRIDGE_CTL_BUS_RESET <<16 )) {u32 val =advk_readl (pcie,PCIE_CORE_CTRL1_REG );Signature · 1 line
2.32.0
Lorenzo Pieralisi
AppliedRe: (subset) [PATCH pci-fixes 0/2] PCI Aardvark controller fixes
In reply to Marek BehúnQuoted 9 lines · Marek Behún
here are two fixes for pci-aardvark controller.
Marek
Marek Behún (1):
Revert "PCI: aardvark: Fix support forPCI_ROM_ADDRESS1on emulated
bridge"[...]
Applied to pci/aardvark, thanks!
[1/2] PCI: aardvark: Fix checking for MEM resource type
https://git.kernel.org/lpieralisi/pci/c/2070b2ddea
Thanks,
Lorenzo