Skip to contentSkip to conversation

4.19.219-rc1 review

PATCH In review Greg Kroah-Hartman 8 participants 77 messages Nov 29, 2021 – Nov 30, 2021

Subsystems (3)
lore
Share & tools
lore
author maintainer
#1 lore raw

PATCH 1/69 USB: serial: option: add Telit LE910S1 0x9200 composition

In reply to Greg Kroah-Hartman

From: Daniele Palmas <[email protected]>

commit e353f3e88720300c3d72f49a4bea54f42db1fa5e upstream.

Add the following Telit LE910S1 composition:

0x9200: tty

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/usb/serial/option.c +2 -0
@@ -1267,6 +1267,8 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, 0x9010),				/* Telit SBL FN980 flashing device */
 	  .driver_info = NCTRL(0) | ZLP },
+	{ USB_DEVICE(TELIT_VENDOR_ID, 0x9200),				/* Telit LE910S1 flashing device */
+	  .driver_info = NCTRL(0) | ZLP },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) },
author maintainer
#17 lore raw

PATCH 17/69 PCI: aardvark: Fix a leaked reference by adding missing of_node_put()

In reply to Greg Kroah-Hartman

From: Wen Yang <[email protected]>

commit 3842f5166bf1ef286fe7a39f262b5c9581308366 upstream.

The call to of_get_next_child() returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage.

irq_domain_add_linear() also calls of_node_get() to increase refcount, so irq_domain will not be affected when it is released.

Detected by coccinelle with the following warnings:
./drivers/pci/controller/pci-aardvark.c:826:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 798, but without a corresponding object release within this function.

---
 drivers/pci/controller/pci-aardvark.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
drivers/pci/controller/pci-aardvark.c +8 -5
@@ -754,6 +754,7 @@ static int advk_pcie_init_irq_domain(str
 	struct device_node *node = dev->of_node;
 	struct device_node *pcie_intc_node;
 	struct irq_chip *irq_chip;
+	int ret = 0;
 
 	raw_spin_lock_init(&pcie->irq_lock);
 
@@ -768,8 +769,8 @@ static int advk_pcie_init_irq_domain(str
 	irq_chip->name = devm_kasprintf(dev, GFP_KERNEL, "%s-irq",
 					dev_name(dev));
 	if (!irq_chip->name) {
-		of_node_put(pcie_intc_node);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto out_put_node;
 	}
 
 	irq_chip->irq_mask = advk_pcie_irq_mask;
@@ -781,11 +782,13 @@ static int advk_pcie_init_irq_domain(str
 				      &advk_pcie_irq_domain_ops, pcie);
 	if (!pcie->irq_domain) {
 		dev_err(dev, "Failed to get a INTx IRQ domain\n");
-		of_node_put(pcie_intc_node);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto out_put_node;
 	}
 
-	return 0;
+out_put_node:
+	of_node_put(pcie_intc_node);
+	return ret;
 }
 
 static void advk_pcie_remove_irq_domain(struct advk_pcie *pcie)

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

author maintainer
#2 lore raw

PATCH 2/69 USB: serial: option: add Fibocom FM101-GL variants

In reply to Greg Kroah-Hartman

From: Mingjie Zhang <[email protected]>

commit 88459e3e42760abb2299bbf6cb1026491170e02a upstream.

Update the USB serial option driver support for the Fibocom FM101-GL Cat.6
LTE modules as there are actually several different variants.
- VID:PID 2cb7:01a2, FM101-GL are laptop M.2 cards (with MBIM interfaces for /Linux/Chrome OS)
- VID:PID 2cb7:01a4, FM101-GL for laptop debug M.2 cards(with adb interface for /Linux/Chrome OS)

0x01a2: mbim, tty, tty, diag, gnss
0x01a4: mbim, diag, tty, adb, gnss, gnss

Here are the outputs of lsusb -v and usb-devices:

T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 86 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2cb7 ProdID=01a2 Rev= 5.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=Fibocom FM101-GL Module
S:  SerialNumber=673326ce

C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none) I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none) I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)

Bus 002 Device 084: ID 2cb7:01a2 Fibocom Wireless Inc. Fibocom FM101-GL Module Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.20

  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         9
  idVendor           0x2cb7
  idProduct          0x01a2
  bcdDevice            5.04
  iManufacturer           1 Fibocom Wireless Inc.
  iProduct                2 Fibocom FM101-GL Module
  iSerial                 3 673326ce
  bNumConfigurations      1

Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x015d
bNumInterfaces 6
bConfigurationValue 1
iConfiguration 4 MBIM_DUN_DUN_DIAG_NMEA
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 896mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 14
bFunctionProtocol 0
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 14
bInterfaceProtocol 0
iInterface 5 Fibocom FM101-GL LTE Modem
CDC Header:
bcdCDC 1.10
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC MBIM:
bcdMBIMVersion 1.00
wMaxControlMessage 4096
bNumberFilters 32
bMaxFilterSize 128
wMaxSegmentSize 2048
bmNetworkCapabilities 0x20
8-byte ntb input size
CDC MBIM Extended:
bcdMBIMExtendedVersion 1.00
bMaxOutstandingCommandMessages 64
wMTU 1500
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 9
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 2
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 2
iInterface 6 MBIM Data
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8e EP 14 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 6
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x0f EP 15 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 2
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 48
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 5
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0

T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 85 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2cb7 ProdID=01a4 Rev= 5.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=Fibocom FM101-GL Module
S:  SerialNumber=673326ce

C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=896mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none) I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none) I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)

Bus 002 Device 085: ID 2cb7:01a4 Fibocom Wireless Inc. Fibocom FM101-GL Module Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.20

  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         9
  idVendor           0x2cb7
  idProduct          0x01a4
  bcdDevice            5.04
  iManufacturer           1 Fibocom Wireless Inc.
  iProduct                2 Fibocom FM101-GL Module
  iSerial                 3 673326ce
  bNumConfigurations      1

Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0180
bNumInterfaces 7
bConfigurationValue 1
iConfiguration 4 MBIM_DIAG_DUN_ADB_GNSS_GNSS
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 896mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 14
bFunctionProtocol 0
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 14
bInterfaceProtocol 0
iInterface 5 Fibocom FM101-GL LTE Modem
CDC Header:
bcdCDC 1.10
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC MBIM:
bcdMBIMVersion 1.00
wMaxControlMessage 4096
bNumberFilters 32
bMaxFilterSize 128
wMaxSegmentSize 2048
bmNetworkCapabilities 0x20
8-byte ntb input size
CDC MBIM Extended:
bcdMBIMExtendedVersion 1.00
bMaxOutstandingCommandMessages 64
wMTU 1500
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 9
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 2
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 2
iInterface 6 MBIM Data
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8e EP 14 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 6
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x0f EP 15 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 2
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 48
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 66
bInterfaceProtocol 1
iInterface 8 ADB Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 5
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 6
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x89 EP 9 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0

---
 drivers/usb/serial/option.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/usb/serial/option.c +3 -0
@@ -2096,6 +2096,9 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) },	/* Fibocom FG150 Diag */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) },		/* Fibocom FG150 AT */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) },			/* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a2, 0xff) },			/* Fibocom FM101-GL (laptop MBIM) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff),			/* Fibocom FM101-GL (laptop MBIM) */
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) },			/* LongSung M5710 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */
author maintainer
#22 lore raw

PATCH 22/69 PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

commit 96be36dbffacea0aa9e6ec4839583e79faa141a1 upstream.

PCI-E capability macros are already defined in linux/pci_regs.h. Remove their reimplementation in pcie-aardvark.

---
 drivers/pci/controller/pci-aardvark.c |   42 +++++++++++++++-------------------
 1 file changed, 19 insertions(+), 23 deletions(-)
drivers/pci/controller/pci-aardvark.c +19 -23
@@ -28,17 +28,7 @@
 #define     PCIE_CORE_CMD_IO_ACCESS_EN				BIT(0)
 #define     PCIE_CORE_CMD_MEM_ACCESS_EN				BIT(1)
 #define     PCIE_CORE_CMD_MEM_IO_REQ_EN				BIT(2)
-#define PCIE_CORE_DEV_CTRL_STATS_REG				0xc8
-#define     PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE	(0 << 4)
-#define     PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT	5
-#define     PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE		(0 << 11)
-#define     PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT	12
-#define     PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ		0x2
-#define PCIE_CORE_LINK_CTRL_STAT_REG				0xd0
-#define     PCIE_CORE_LINK_L0S_ENTRY				BIT(0)
-#define     PCIE_CORE_LINK_TRAINING				BIT(5)
-#define     PCIE_CORE_LINK_SPEED_SHIFT				16
-#define     PCIE_CORE_LINK_WIDTH_SHIFT				20
+#define PCIE_CORE_PCIEXP_CAP					0xc0
 #define PCIE_CORE_ERR_CAPCTL_REG				0x118
 #define     PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX			BIT(5)
 #define     PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN			BIT(6)
@@ -210,6 +200,11 @@ static inline u32 advk_readl(struct advk
 	return readl(pcie->base + reg);
 }
 
+static inline u16 advk_read16(struct advk_pcie *pcie, u64 reg)
+{
+	return advk_readl(pcie, (reg & ~0x3)) >> ((reg & 0x3) * 8);
+}
+
 static int advk_pcie_link_up(struct advk_pcie *pcie)
 {
 	u32 val, ltssm_state;
@@ -262,16 +257,16 @@ static int advk_pcie_train_at_gen(struct
 	 * Start link training immediately after enabling it.
 	 * This solves problems for some buggy cards.
 	 */
-	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
-	reg |= PCIE_CORE_LINK_TRAINING;
-	advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
+	reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
+	reg |= PCI_EXP_LNKCTL_RL;
+	advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
 
 	ret = advk_pcie_wait_for_link(pcie);
 	if (ret)
 		return ret;
 
-	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
-	neg_gen = (reg >> PCIE_CORE_LINK_SPEED_SHIFT) & 0xf;
+	reg = advk_read16(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKSTA);
+	neg_gen = reg & PCI_EXP_LNKSTA_CLS;
 
 	return neg_gen;
 }
@@ -356,13 +351,14 @@ static void advk_pcie_setup_hw(struct ad
 		PCIE_CORE_ERR_CAPCTL_ECRC_CHCK_RCV;
 	advk_writel(pcie, reg, PCIE_CORE_ERR_CAPCTL_REG);
 
-	/* Set PCIe Device Control and Status 1 PF0 register */
-	reg = PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE |
-		(7 << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) |
-		PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE |
-		(PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ <<
-		 PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT);
-	advk_writel(pcie, reg, PCIE_CORE_DEV_CTRL_STATS_REG);
+	/* Set PCIe Device Control register */
+	reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
+	reg &= ~PCI_EXP_DEVCTL_RELAX_EN;
+	reg &= ~PCI_EXP_DEVCTL_NOSNOOP_EN;
+	reg &= ~PCI_EXP_DEVCTL_READRQ;
+	reg |= PCI_EXP_DEVCTL_PAYLOAD; /* Set max payload size */
+	reg |= PCI_EXP_DEVCTL_READRQ_512B;
+	advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
 
 	/* Program PCIe Control 2 to disable strict ordering */
 	reg = PCIE_CORE_CTRL2_RESERVED |
author maintainer
#25 lore raw

PATCH 25/69 PCI: aardvark: Fix compilation on s390

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

commit b32c012e4b98f0126aa327be2d1f409963057643 upstream.

Include linux/gpio/consumer.h instead of linux/gpio.h, as is said in the latter file.

This was reported by kernel test bot when compiling for s390.

drivers/pci/controller/pci-aardvark.c:350:2: error: implicit declaration of function 'gpiod_set_value_cansleep' [-Werror,-Wimplicit-function-declaration] drivers/pci/controller/pci-aardvark.c:1074:21: error: implicit declaration of function 'devm_gpiod_get_from_of_node' [-Werror,-Wimplicit-function-declaration] drivers/pci/controller/pci-aardvark.c:1076:14: error: use of undeclared identifier 'GPIOD_OUT_LOW'

---
 drivers/pci/controller/pci-aardvark.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pci/controller/pci-aardvark.c +1 -1
@@ -9,7 +9,7 @@
  */
 
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
author maintainer
#27 lore raw

PATCH 27/69 PCI: aardvark: Update comment about disabling link training

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

commit 1d1cd163d0de22a4041a6f1aeabcf78f80076539 upstream.

According to PCI Express Base Specifications (rev 4.0, 6.6.1 "Conventional reset"), after fundamental reset a 100ms delay is needed prior to enabling link training.

Update comment in code to reflect this requirement.

---
 drivers/pci/controller/pci-aardvark.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/pci/controller/pci-aardvark.c +8 -1
@@ -236,7 +236,14 @@ static void advk_pcie_issue_perst(struct
 	if (!pcie->reset_gpio)
 		return;
 
-	/* PERST does not work for some cards when link training is enabled */
+	/*
+	 * As required by PCI Express spec (PCI Express Base Specification, REV.
+	 * 4.0 PCI Express, February 19 2014, 6.6.1 Conventional Reset) a delay
+	 * for at least 100ms after de-asserting PERST# signal is needed before
+	 * link training is enabled. So ensure that link training is disabled
+	 * prior de-asserting PERST# signal to fulfill that PCI Express spec
+	 * requirement.
+	 */
 	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
 	reg &= ~LINK_TRAINING_EN;
 	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
author maintainer
#28 lore raw

PATCH 28/69 PCI: aardvark: Configure PCIe resources from ranges DT property

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

commit 64f160e19e9264a7f6d89c516baae1473b6f8359 upstream.

In commit 6df6ba974a55 ("PCI: aardvark: Remove PCIe outbound window configuration") was removed aardvark PCIe outbound window configuration and commit description said that was recommended solution by HW designers.

But that commit completely removed support for configuring PCIe IO resources without removing PCIe IO 'ranges' from DTS files. After that commit PCIe IO space started to be treated as PCIe MEM space and accessing it just caused kernel crash.

Moreover implementation of PCIe outbound windows prior that commit was incorrect. It completely ignored offset between CPU address and PCIe bus address and expected that in DTS is CPU address always same as PCIe bus address without doing any checks. Also it completely ignored size of every PCIe resource specified in 'ranges' DTS property and expected that every PCIe resource has size 128 MB (also for PCIe IO range). Again without any check. Apparently none of PCIe resource has in DTS specified size of 128 MB. So it was completely broken and thanks to how aardvark mask works, configuration was completely ignored.

This patch reverts back support for PCIe outbound window configuration but implementation is a new without issues mentioned above. PCIe outbound window is required when DTS specify in 'ranges' property non-zero offset between CPU and PCIe address space. To address recommendation by HW designers as specified in commit description of 6df6ba974a55, set default outbound parameters as PCIe MEM access without translation and therefore for this PCIe 'ranges' it is not needed to configure PCIe outbound window. For PCIe IO space is needed to configure aardvark PCIe outbound window.

This patch fixes kernel crash when trying to access PCIe IO space.

---
 drivers/pci/controller/pci-aardvark.c |  190 +++++++++++++++++++++++++++++++++-
 1 file changed, 189 insertions(+), 1 deletion(-)
drivers/pci/controller/pci-aardvark.c +189 -1
@@ -106,6 +106,46 @@
 #define PCIE_MSI_PAYLOAD_REG			(CONTROL_BASE_ADDR + 0x9C)
 #define     PCIE_MSI_DATA_MASK			GENMASK(15, 0)
 
+/* PCIe window configuration */
+#define OB_WIN_BASE_ADDR			0x4c00
+#define OB_WIN_BLOCK_SIZE			0x20
+#define OB_WIN_COUNT				8
+#define OB_WIN_REG_ADDR(win, offset)		(OB_WIN_BASE_ADDR + \
+						  OB_WIN_BLOCK_SIZE * (win) + \
+						  (offset))
+#define OB_WIN_MATCH_LS(win)			OB_WIN_REG_ADDR(win, 0x00)
+#define     OB_WIN_ENABLE			BIT(0)
+#define OB_WIN_MATCH_MS(win)			OB_WIN_REG_ADDR(win, 0x04)
+#define OB_WIN_REMAP_LS(win)			OB_WIN_REG_ADDR(win, 0x08)
+#define OB_WIN_REMAP_MS(win)			OB_WIN_REG_ADDR(win, 0x0c)
+#define OB_WIN_MASK_LS(win)			OB_WIN_REG_ADDR(win, 0x10)
+#define OB_WIN_MASK_MS(win)			OB_WIN_REG_ADDR(win, 0x14)
+#define OB_WIN_ACTIONS(win)			OB_WIN_REG_ADDR(win, 0x18)
+#define OB_WIN_DEFAULT_ACTIONS			(OB_WIN_ACTIONS(OB_WIN_COUNT-1) + 0x4)
+#define     OB_WIN_FUNC_NUM_MASK		GENMASK(31, 24)
+#define     OB_WIN_FUNC_NUM_SHIFT		24
+#define     OB_WIN_FUNC_NUM_ENABLE		BIT(23)
+#define     OB_WIN_BUS_NUM_BITS_MASK		GENMASK(22, 20)
+#define     OB_WIN_BUS_NUM_BITS_SHIFT		20
+#define     OB_WIN_MSG_CODE_ENABLE		BIT(22)
+#define     OB_WIN_MSG_CODE_MASK		GENMASK(21, 14)
+#define     OB_WIN_MSG_CODE_SHIFT		14
+#define     OB_WIN_MSG_PAYLOAD_LEN		BIT(12)
+#define     OB_WIN_ATTR_ENABLE			BIT(11)
+#define     OB_WIN_ATTR_TC_MASK			GENMASK(10, 8)
+#define     OB_WIN_ATTR_TC_SHIFT		8
+#define     OB_WIN_ATTR_RELAXED			BIT(7)
+#define     OB_WIN_ATTR_NOSNOOP			BIT(6)
+#define     OB_WIN_ATTR_POISON			BIT(5)
+#define     OB_WIN_ATTR_IDO			BIT(4)
+#define     OB_WIN_TYPE_MASK			GENMASK(3, 0)
+#define     OB_WIN_TYPE_SHIFT			0
+#define     OB_WIN_TYPE_MEM			0x0
+#define     OB_WIN_TYPE_IO			0x4
+#define     OB_WIN_TYPE_CONFIG_TYPE0		0x8
+#define     OB_WIN_TYPE_CONFIG_TYPE1		0x9
+#define     OB_WIN_TYPE_MSG			0xc
+
 /* LMI registers base address and register offsets */
 #define LMI_BASE_ADDR				0x6000
 #define CFG_REG					(LMI_BASE_ADDR + 0x0)
@@ -174,6 +214,13 @@ struct advk_pcie {
 	struct platform_device *pdev;
 	void __iomem *base;
 	struct list_head resources;
+	struct {
+		phys_addr_t match;
+		phys_addr_t remap;
+		phys_addr_t mask;
+		u32 actions;
+	} wins[OB_WIN_COUNT];
+	u8 wins_count;
 	struct irq_domain *irq_domain;
 	struct irq_chip irq_chip;
 	raw_spinlock_t irq_lock;
@@ -349,9 +396,39 @@ err:
 	dev_err(dev, "link never came up\n");
 }
 
+/*
+ * Set PCIe address window register which could be used for memory
+ * mapping.
+ */
+static void advk_pcie_set_ob_win(struct advk_pcie *pcie, u8 win_num,
+				 phys_addr_t match, phys_addr_t remap,
+				 phys_addr_t mask, u32 actions)
+{
+	advk_writel(pcie, OB_WIN_ENABLE |
+			  lower_32_bits(match), OB_WIN_MATCH_LS(win_num));
+	advk_writel(pcie, upper_32_bits(match), OB_WIN_MATCH_MS(win_num));
+	advk_writel(pcie, lower_32_bits(remap), OB_WIN_REMAP_LS(win_num));
+	advk_writel(pcie, upper_32_bits(remap), OB_WIN_REMAP_MS(win_num));
+	advk_writel(pcie, lower_32_bits(mask), OB_WIN_MASK_LS(win_num));
+	advk_writel(pcie, upper_32_bits(mask), OB_WIN_MASK_MS(win_num));
+	advk_writel(pcie, actions, OB_WIN_ACTIONS(win_num));
+}
+
+static void advk_pcie_disable_ob_win(struct advk_pcie *pcie, u8 win_num)
+{
+	advk_writel(pcie, 0, OB_WIN_MATCH_LS(win_num));
+	advk_writel(pcie, 0, OB_WIN_MATCH_MS(win_num));
+	advk_writel(pcie, 0, OB_WIN_REMAP_LS(win_num));
+	advk_writel(pcie, 0, OB_WIN_REMAP_MS(win_num));
+	advk_writel(pcie, 0, OB_WIN_MASK_LS(win_num));
+	advk_writel(pcie, 0, OB_WIN_MASK_MS(win_num));
+	advk_writel(pcie, 0, OB_WIN_ACTIONS(win_num));
+}
+
 static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 {
 	u32 reg;
+	int i;
 
 	/* Set to Direct mode */
 	reg = advk_readl(pcie, CTRL_CONFIG_REG);
@@ -415,15 +492,51 @@ static void advk_pcie_setup_hw(struct ad
 	reg = PCIE_IRQ_ALL_MASK & (~PCIE_IRQ_ENABLE_INTS_MASK);
 	advk_writel(pcie, reg, HOST_CTRL_INT_MASK_REG);
 
+	/*
+	 * Enable AXI address window location generation:
+	 * When it is enabled, the default outbound window
+	 * configurations (Default User Field: 0xD0074CFC)
+	 * are used to transparent address translation for
+	 * the outbound transactions. Thus, PCIe address
+	 * windows are not required for transparent memory
+	 * access when default outbound window configuration
+	 * is set for memory access.
+	 */
 	reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
 	reg |= PCIE_CORE_CTRL2_OB_WIN_ENABLE;
 	advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
 
-	/* Bypass the address window mapping for PIO */
+	/*
+	 * Set memory access in Default User Field so it
+	 * is not required to configure PCIe address for
+	 * transparent memory access.
+	 */
+	advk_writel(pcie, OB_WIN_TYPE_MEM, OB_WIN_DEFAULT_ACTIONS);
+
+	/*
+	 * Bypass the address window mapping for PIO:
+	 * Since PIO access already contains all required
+	 * info over AXI interface by PIO registers, the
+	 * address window is not required.
+	 */
 	reg = advk_readl(pcie, PIO_CTRL);
 	reg |= PIO_CTRL_ADDR_WIN_DISABLE;
 	advk_writel(pcie, reg, PIO_CTRL);
 
+	/*
+	 * Configure PCIe address windows for non-memory or
+	 * non-transparent access as by default PCIe uses
+	 * transparent memory access.
+	 */
+	for (i = 0; i < pcie->wins_count; i++)
+		advk_pcie_set_ob_win(pcie, i,
+				     pcie->wins[i].match, pcie->wins[i].remap,
+				     pcie->wins[i].mask, pcie->wins[i].actions);
+
+	/* Disable remaining PCIe outbound windows */
+	for (i = pcie->wins_count; i < OB_WIN_COUNT; i++)
+		advk_pcie_disable_ob_win(pcie, i);
+
 	advk_pcie_train_link(pcie);
 
 	reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
@@ -1038,6 +1151,7 @@ static int advk_pcie_probe(struct platfo
 	struct advk_pcie *pcie;
 	struct resource *res;
 	struct pci_host_bridge *bridge;
+	struct resource_entry *entry;
 	int ret, irq;
 
 	bridge = devm_pci_alloc_host_bridge(dev, sizeof(struct advk_pcie));
@@ -1067,6 +1181,80 @@ static int advk_pcie_probe(struct platfo
 		return ret;
 	}
 
+	resource_list_for_each_entry(entry, &pcie->resources) {
+		resource_size_t start = entry->res->start;
+		resource_size_t size = resource_size(entry->res);
+		unsigned long type = resource_type(entry->res);
+		u64 win_size;
+
+		/*
+		 * Aardvark hardware allows to configure also PCIe window
+		 * for config type 0 and type 1 mapping, but driver uses
+		 * only PIO for issuing configuration transfers which does
+		 * not use PCIe window configuration.
+		 */
+		if (type != IORESOURCE_MEM && type != IORESOURCE_MEM_64 &&
+		    type != IORESOURCE_IO)
+			continue;
+
+		/*
+		 * Skip transparent memory resources. Default outbound access
+		 * configuration is set to transparent memory access so it
+		 * does not need window configuration.
+		 */
+		if ((type == IORESOURCE_MEM || type == IORESOURCE_MEM_64) &&
+		    entry->offset == 0)
+			continue;
+
+		/*
+		 * The n-th PCIe window is configured by tuple (match, remap, mask)
+		 * and an access to address A uses this window if A matches the
+		 * match with given mask.
+		 * So every PCIe window size must be a power of two and every start
+		 * address must be aligned to window size. Minimal size is 64 KiB
+		 * because lower 16 bits of mask must be zero. Remapped address
+		 * may have set only bits from the mask.
+		 */
+		while (pcie->wins_count < OB_WIN_COUNT && size > 0) {
+			/* Calculate the largest aligned window size */
+			win_size = (1ULL << (fls64(size)-1)) |
+				   (start ? (1ULL << __ffs64(start)) : 0);
+			win_size = 1ULL << __ffs64(win_size);
+			if (win_size < 0x10000)
+				break;
+
+			dev_dbg(dev,
+				"Configuring PCIe window %d: [0x%llx-0x%llx] as %lu\n",
+				pcie->wins_count, (unsigned long long)start,
+				(unsigned long long)start + win_size, type);
+
+			if (type == IORESOURCE_IO) {
+				pcie->wins[pcie->wins_count].actions = OB_WIN_TYPE_IO;
+				pcie->wins[pcie->wins_count].match = pci_pio_to_address(start);
+			} else {
+				pcie->wins[pcie->wins_count].actions = OB_WIN_TYPE_MEM;
+				pcie->wins[pcie->wins_count].match = start;
+			}
+			pcie->wins[pcie->wins_count].remap = start - entry->offset;
+			pcie->wins[pcie->wins_count].mask = ~(win_size - 1);
+
+			if (pcie->wins[pcie->wins_count].remap & (win_size - 1))
+				break;
+
+			start += win_size;
+			size -= win_size;
+			pcie->wins_count++;
+		}
+
+		if (size > 0) {
+			dev_err(&pcie->pdev->dev,
+				"Invalid PCIe region [0x%llx-0x%llx]\n",
+				(unsigned long long)entry->res->start,
+				(unsigned long long)entry->res->end + 1);
+			return -EINVAL;
+		}
+	}
+
 	pcie->reset_gpio = devm_gpiod_get_from_of_node(dev, dev->of_node,
 						       "reset-gpios", 0,
 						       GPIOD_OUT_LOW,
author maintainer
#30 lore raw

PATCH 30/69 PCI: aardvark: Fix link training

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

commit f76b36d40beee0a13aa8f6aa011df0d7cbbb8a7f upstream.

Fix multiple link training issues in aardvark driver. The main reason of these issues was misunderstanding of what certain registers do, since their names and comments were misleading: before commit 96be36dbffac ("PCI:
aardvark: Replace custom macros by standard linux/pci_regs.h macros"), the pci-aardvark.c driver used custom macros for accessing standard PCIe Root Bridge registers, and misleading comments did not help to understand what the code was really doing.

After doing more tests and experiments I've come to the conclusion that the SPEED_GEN register in aardvark sets the PCIe revision / generation compliance and forces maximal link speed. Both GEN3 and GEN2 values set the read-only PCI_EXP_FLAGS_VERS bits (PCIe capabilities version of Root Bridge) to value 2, while GEN1 value sets PCI_EXP_FLAGS_VERS to 1, which matches with PCI Express specifications revisions 3, 2 and 1 respectively. Changing SPEED_GEN also sets the read-only bits PCI_EXP_LNKCAP_SLS and PCI_EXP_LNKCAP2_SLS to corresponding speed.

(Note that PCI Express rev 1 specification does not define PCI_EXP_LNKCAP2
and PCI_EXP_LNKCTL2 registers and when SPEED_GEN is set to GEN1 (which also sets PCI_EXP_FLAGS_VERS set to 1), lspci cannot access PCI_EXP_LNKCAP2 and PCI_EXP_LNKCTL2 registers.)

Changing PCIe link speed can be done via PCI_EXP_LNKCTL2_TLS bits of PCI_EXP_LNKCTL2 register. Armada 3700 Functional Specifications says that the default value of PCI_EXP_LNKCTL2_TLS is based on SPEED_GEN value, but tests showed that the default value is always 8.0 GT/s, independently of speed set by SPEED_GEN. So after setting SPEED_GEN, we must also set value in PCI_EXP_LNKCTL2 register via PCI_EXP_LNKCTL2_TLS bits.

Triggering PCI_EXP_LNKCTL_RL bit immediately after setting LINK_TRAINING_EN bit actually doesn't do anything. Tests have shown that a delay is needed after enabling LINK_TRAINING_EN bit. As triggering PCI_EXP_LNKCTL_RL currently does nothing, remove it.

Commit 43fc679ced18 ("PCI: aardvark: Improve link training") introduced code which sets SPEED_GEN register based on negotiated link speed from PCI_EXP_LNKSTA_CLS bits of PCI_EXP_LNKSTA register. This code was added to fix detection of Compex WLE900VX (Atheros QCA9880) WiFi GEN1 PCIe cards, as otherwise these cards were "invisible" on PCIe bus (probably because they crashed). But apparently more people reported the same issues with these cards also with other PCIe controllers [1] and I was able to reproduce this issue also with other "noname" WiFi cards based on Atheros QCA9890 chip (with the same PCI vendor/device ids as Atheros QCA9880). So this is not an issue in aardvark but rather an issue in Atheros QCA98xx chips. Also, this issue only exists if the kernel is compiled with PCIe ASPM support, and a generic workaround for this is to change PCIe Bridge to 2.5 GT/s link speed via PCI_EXP_LNKCTL2_TLS_2_5GT bits in PCI_EXP_LNKCTL2 register [2], before triggering PCI_EXP_LNKCTL_RL bit. This workaround also works when SPEED_GEN is set to value GEN2 (5 GT/s). So remove this hack completely in the aardvark driver and always set SPEED_GEN to value from 'max-link-speed' DT property. Fix for Atheros QCA98xx chips is handled separately by patch [2].

These two things (code for triggering PCI_EXP_LNKCTL_RL bit and changing SPEED_GEN value) also explain why commit 6964494582f5 ("PCI: aardvark:
Train link immediately after enabling training") somehow fixed detection of those problematic Compex cards with Atheros chips: if triggering link retraining (via PCI_EXP_LNKCTL_RL bit) was done immediately after enabling link training (via LINK_TRAINING_EN), it did nothing. If there was a specific delay, aardvark HW already initialized PCIe link and therefore triggering link retraining caused the above issue. Compex cards triggered link down event and disappeared from the PCIe bus.

Commit f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready before training link") added 100ms sleep before calling 'Start link training' command and explained that it is a requirement of PCI Express specification. But the code after this 100ms sleep was not doing 'Start link training', rather it triggered PCI_EXP_LNKCTL_RL bit via PCIe Root Bridge to put link into Recovery state.

The required delay after fundamental reset is already done in function advk_pcie_wait_for_link() which also checks whether PCIe link is up. So after removing the code which triggers PCI_EXP_LNKCTL_RL bit on PCIe Root Bridge, there is no need to wait 100ms again. Remove the extra msleep() call and update comment about the delay required by the PCI Express specification.

According to Marvell Armada 3700 Functional Specifications, Link training should be enabled via aardvark register LINK_TRAINING_EN after selecting PCIe generation and x1 lane. There is no need to disable it prior resetting card via PERST# signal. This disabling code was introduced in commit 5169a9851daa ("PCI: aardvark: Issue PERST via GPIO") as a workaround for some Atheros cards. It turns out that this also is Atheros specific issue and affects any PCIe controller, not only aardvark. Moreover this Atheros issue was triggered by juggling with PCI_EXP_LNKCTL_RL, LINK_TRAINING_EN and SPEED_GEN bits interleaved with sleeps. Now, after removing triggering PCI_EXP_LNKCTL_RL, there is no need to explicitly disable LINK_TRAINING_EN bit. So remove this code too. The problematic Compex cards described in previous git commits are correctly detected in advk_pcie_train_link() function even after applying all these changes.

Note that with this patch, and also prior this patch, some NVMe disks which support PCIe GEN3 with 8 GT/s speed are negotiated only at the lowest link speed 2.5 GT/s, independently of SPEED_GEN value. After manually triggering PCI_EXP_LNKCTL_RL bit (e.g. from userspace via setpci), these NVMe disks change link speed to 5 GT/s when SPEED_GEN was configured to GEN2. This issue first needs to be properly investigated. I will send a fix in the future.

On the other hand, some other GEN2 PCIe cards with 5 GT/s speed are autonomously by HW autonegotiated at full 5 GT/s speed without need of any software interaction.

Armada 3700 Functional Specifications describes the following steps for link training: set SPEED_GEN to GEN2, enable LINK_TRAINING_EN, poll until link training is complete, trigger PCI_EXP_LNKCTL_RL, poll until signal rate is 5 GT/s, poll until link training is complete, enable ASPM L0s.

The requirement for triggering PCI_EXP_LNKCTL_RL can be explained by the need to achieve 5 GT/s speed (as changing link speed is done by throw to recovery state entered by PCI_EXP_LNKCTL_RL) or maybe as a part of enabling ASPM L0s (but in this case ASPM L0s should have been enabled prior PCI_EXP_LNKCTL_RL).

It is unknown why the original pci-aardvark.c driver was triggering PCI_EXP_LNKCTL_RL bit before waiting for the link to be up. This does not align with neither PCIe base specifications nor with Armada 3700 Functional Specification. (Note that in older versions of aardvark, this bit was called incorrectly PCIE_CORE_LINK_TRAINING, so this may be the reason.)

It is also unknown why Armada 3700 Functional Specification says that it is needed to trigger PCI_EXP_LNKCTL_RL for GEN2 mode, as according to PCIe base specification 5 GT/s speed negotiation is supposed to be entirely autonomous, even if initial speed is 2.5 GT/s.

[1] - https://lore.kernel.org/linux-pci/[email protected]/
[2] - https://lore.kernel.org/linux-pci/[email protected]/

---
 drivers/pci/controller/pci-aardvark.c |  119 ++++++++++------------------------
 1 file changed, 35 insertions(+), 84 deletions(-)
drivers/pci/controller/pci-aardvark.c +35 -84
@@ -247,11 +247,6 @@ static inline u32 advk_readl(struct advk
 	return readl(pcie->base + reg);
 }
 
-static inline u16 advk_read16(struct advk_pcie *pcie, u64 reg)
-{
-	return advk_readl(pcie, (reg & ~0x3)) >> ((reg & 0x3) * 8);
-}
-
 static int advk_pcie_link_up(struct advk_pcie *pcie)
 {
 	u32 val, ltssm_state;
@@ -278,23 +273,9 @@ static int advk_pcie_wait_for_link(struc
 
 static void advk_pcie_issue_perst(struct advk_pcie *pcie)
 {
-	u32 reg;
-
 	if (!pcie->reset_gpio)
 		return;
 
-	/*
-	 * As required by PCI Express spec (PCI Express Base Specification, REV.
-	 * 4.0 PCI Express, February 19 2014, 6.6.1 Conventional Reset) a delay
-	 * for at least 100ms after de-asserting PERST# signal is needed before
-	 * link training is enabled. So ensure that link training is disabled
-	 * prior de-asserting PERST# signal to fulfill that PCI Express spec
-	 * requirement.
-	 */
-	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
-	reg &= ~LINK_TRAINING_EN;
-	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
 	/* 10ms delay is needed for some cards */
 	dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for 10ms\n");
 	gpiod_set_value_cansleep(pcie->reset_gpio, 1);
@@ -302,54 +283,47 @@ static void advk_pcie_issue_perst(struct
 	gpiod_set_value_cansleep(pcie->reset_gpio, 0);
 }
 
-static int advk_pcie_train_at_gen(struct advk_pcie *pcie, int gen)
+static void advk_pcie_train_link(struct advk_pcie *pcie)
 {
-	int ret, neg_gen;
+	struct device *dev = &pcie->pdev->dev;
 	u32 reg;
+	int ret;
 
-	/* Setup link speed */
+	/*
+	 * Setup PCIe rev / gen compliance based on device tree property
+	 * 'max-link-speed' which also forces maximal link speed.
+	 */
 	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
 	reg &= ~PCIE_GEN_SEL_MSK;
-	if (gen == 3)
+	if (pcie->link_gen == 3)
 		reg |= SPEED_GEN_3;
-	else if (gen == 2)
+	else if (pcie->link_gen == 2)
 		reg |= SPEED_GEN_2;
 	else
 		reg |= SPEED_GEN_1;
 	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
 
 	/*
-	 * Enable link training. This is not needed in every call to this
-	 * function, just once suffices, but it does not break anything either.
-	 */
+	 * Set maximal link speed value also into PCIe Link Control 2 register.
+	 * Armada 3700 Functional Specification says that default value is based
+	 * on SPEED_GEN but tests showed that default value is always 8.0 GT/s.
+	 */
+	reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL2);
+	reg &= ~PCI_EXP_LNKCTL2_TLS;
+	if (pcie->link_gen == 3)
+		reg |= PCI_EXP_LNKCTL2_TLS_8_0GT;
+	else if (pcie->link_gen == 2)
+		reg |= PCI_EXP_LNKCTL2_TLS_5_0GT;
+	else
+		reg |= PCI_EXP_LNKCTL2_TLS_2_5GT;
+	advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL2);
+
+	/* Enable link training after selecting PCIe generation */
 	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
 	reg |= LINK_TRAINING_EN;
 	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
 
 	/*
-	 * Start link training immediately after enabling it.
-	 * This solves problems for some buggy cards.
-	 */
-	reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
-	reg |= PCI_EXP_LNKCTL_RL;
-	advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
-
-	ret = advk_pcie_wait_for_link(pcie);
-	if (ret)
-		return ret;
-
-	reg = advk_read16(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKSTA);
-	neg_gen = reg & PCI_EXP_LNKSTA_CLS;
-
-	return neg_gen;
-}
-
-static void advk_pcie_train_link(struct advk_pcie *pcie)
-{
-	struct device *dev = &pcie->pdev->dev;
-	int neg_gen = -1, gen;
-
-	/*
 	 * Reset PCIe card via PERST# signal. Some cards are not detected
 	 * during link training when they are in some non-initial state.
 	 */
@@ -359,41 +333,18 @@ static void advk_pcie_train_link(struct
 	 * PERST# signal could have been asserted by pinctrl subsystem before
 	 * probe() callback has been called or issued explicitly by reset gpio
 	 * function advk_pcie_issue_perst(), making the endpoint going into
-	 * fundamental reset. As required by PCI Express spec a delay for at
-	 * least 100ms after such a reset before link training is needed.
-	 */
-	msleep(PCI_PM_D3COLD_WAIT);
-
-	/*
-	 * Try link training at link gen specified by device tree property
-	 * 'max-link-speed'. If this fails, iteratively train at lower gen.
-	 */
-	for (gen = pcie->link_gen; gen > 0; --gen) {
-		neg_gen = advk_pcie_train_at_gen(pcie, gen);
-		if (neg_gen > 0)
-			break;
-	}
-
-	if (neg_gen < 0)
-		goto err;
-
-	/*
-	 * After successful training if negotiated gen is lower than requested,
-	 * train again on negotiated gen. This solves some stability issues for
-	 * some buggy gen1 cards.
+	 * fundamental reset. As required by PCI Express spec (PCI Express
+	 * Base Specification, REV. 4.0 PCI Express, February 19 2014, 6.6.1
+	 * Conventional Reset) a delay for at least 100ms after such a reset
+	 * before sending a Configuration Request to the device is needed.
+	 * So wait until PCIe link is up. Function advk_pcie_wait_for_link()
+	 * waits for link at least 900ms.
 	 */
-	if (neg_gen < gen) {
-		gen = neg_gen;
-		neg_gen = advk_pcie_train_at_gen(pcie, gen);
-	}
-
-	if (neg_gen == gen) {
-		dev_info(dev, "link up at gen %i\n", gen);
-		return;
-	}
-
-err:
-	dev_err(dev, "link never came up\n");
+	ret = advk_pcie_wait_for_link(pcie);
+	if (ret < 0)
+		dev_err(dev, "link never came up\n");
+	else
+		dev_info(dev, "link up\n");
 }
 
 /*
author maintainer
#31 lore raw

PATCH 31/69 PCI: aardvark: Fix checking for link up via LTSSM state

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

commit 661c399a651c11aaf83c45cbfe0b4a1fb7bc3179 upstream.

Current implementation of advk_pcie_link_up() is wrong as it marks also link disabled or hot reset states as link up.

Fix it by marking link up only to those states which are defined in PCIe Base specification 3.0, Table 4-14: Link Status Mapped to the LTSSM.

To simplify implementation, Define macros for every LTSSM state which aardvark hardware can return in CFG_REG register.

Fix also checking for link training according to the same Table 4-14. Define a new function advk_pcie_link_training() for this purpose.

---
 drivers/pci/controller/pci-aardvark.c |   71 ++++++++++++++++++++++++++++++++--
 1 file changed, 67 insertions(+), 4 deletions(-)
drivers/pci/controller/pci-aardvark.c +67 -4
@@ -151,9 +151,50 @@
 #define CFG_REG					(LMI_BASE_ADDR + 0x0)
 #define     LTSSM_SHIFT				24
 #define     LTSSM_MASK				0x3f
-#define     LTSSM_L0				0x10
 #define     RC_BAR_CONFIG			0x300
 
+/* LTSSM values in CFG_REG */
+enum {
+	LTSSM_DETECT_QUIET			= 0x0,
+	LTSSM_DETECT_ACTIVE			= 0x1,
+	LTSSM_POLLING_ACTIVE			= 0x2,
+	LTSSM_POLLING_COMPLIANCE		= 0x3,
+	LTSSM_POLLING_CONFIGURATION		= 0x4,
+	LTSSM_CONFIG_LINKWIDTH_START		= 0x5,
+	LTSSM_CONFIG_LINKWIDTH_ACCEPT		= 0x6,
+	LTSSM_CONFIG_LANENUM_ACCEPT		= 0x7,
+	LTSSM_CONFIG_LANENUM_WAIT		= 0x8,
+	LTSSM_CONFIG_COMPLETE			= 0x9,
+	LTSSM_CONFIG_IDLE			= 0xa,
+	LTSSM_RECOVERY_RCVR_LOCK		= 0xb,
+	LTSSM_RECOVERY_SPEED			= 0xc,
+	LTSSM_RECOVERY_RCVR_CFG			= 0xd,
+	LTSSM_RECOVERY_IDLE			= 0xe,
+	LTSSM_L0				= 0x10,
+	LTSSM_RX_L0S_ENTRY			= 0x11,
+	LTSSM_RX_L0S_IDLE			= 0x12,
+	LTSSM_RX_L0S_FTS			= 0x13,
+	LTSSM_TX_L0S_ENTRY			= 0x14,
+	LTSSM_TX_L0S_IDLE			= 0x15,
+	LTSSM_TX_L0S_FTS			= 0x16,
+	LTSSM_L1_ENTRY				= 0x17,
+	LTSSM_L1_IDLE				= 0x18,
+	LTSSM_L2_IDLE				= 0x19,
+	LTSSM_L2_TRANSMIT_WAKE			= 0x1a,
+	LTSSM_DISABLED				= 0x20,
+	LTSSM_LOOPBACK_ENTRY_MASTER		= 0x21,
+	LTSSM_LOOPBACK_ACTIVE_MASTER		= 0x22,
+	LTSSM_LOOPBACK_EXIT_MASTER		= 0x23,
+	LTSSM_LOOPBACK_ENTRY_SLAVE		= 0x24,
+	LTSSM_LOOPBACK_ACTIVE_SLAVE		= 0x25,
+	LTSSM_LOOPBACK_EXIT_SLAVE		= 0x26,
+	LTSSM_HOT_RESET				= 0x27,
+	LTSSM_RECOVERY_EQUALIZATION_PHASE0	= 0x28,
+	LTSSM_RECOVERY_EQUALIZATION_PHASE1	= 0x29,
+	LTSSM_RECOVERY_EQUALIZATION_PHASE2	= 0x2a,
+	LTSSM_RECOVERY_EQUALIZATION_PHASE3	= 0x2b,
+};
+
 /* PCIe core controller registers */
 #define CTRL_CORE_BASE_ADDR			0x18000
 #define CTRL_CONFIG_REG				(CTRL_CORE_BASE_ADDR + 0x0)
@@ -247,13 +288,35 @@ static inline u32 advk_readl(struct advk
 	return readl(pcie->base + reg);
 }
 
-static int advk_pcie_link_up(struct advk_pcie *pcie)
+static u8 advk_pcie_ltssm_state(struct advk_pcie *pcie)
 {
-	u32 val, ltssm_state;
+	u32 val;
+	u8 ltssm_state;
 
 	val = advk_readl(pcie, CFG_REG);
 	ltssm_state = (val >> LTSSM_SHIFT) & LTSSM_MASK;
-	return ltssm_state >= LTSSM_L0;
+	return ltssm_state;
+}
+
+static inline bool advk_pcie_link_up(struct advk_pcie *pcie)
+{
+	/* check if LTSSM is in normal operation - some L* state */
+	u8 ltssm_state = advk_pcie_ltssm_state(pcie);
+	return ltssm_state >= LTSSM_L0 && ltssm_state < LTSSM_DISABLED;
+}
+
+static inline bool advk_pcie_link_training(struct advk_pcie *pcie)
+{
+	/*
+	  * According to PCIe Base specification 3.0, Table 4-14: Link
+	  * Status Mapped to the LTSSM is Link Training mapped to LTSSM
+	  * Configuration and Recovery states.
+	  */
+	u8 ltssm_state = advk_pcie_ltssm_state(pcie);
+	return ((ltssm_state >= LTSSM_CONFIG_LINKWIDTH_START &&
+		  ltssm_state < LTSSM_L0) ||
+		(ltssm_state >= LTSSM_RECOVERY_EQUALIZATION_PHASE0 &&
+		  ltssm_state <= LTSSM_RECOVERY_EQUALIZATION_PHASE3));
 }
 
 static int advk_pcie_wait_for_link(struct advk_pcie *pcie)
author maintainer
#32 lore raw

PATCH 32/69 pinctrl: armada-37xx: Correct mpp definitions

In reply to Greg Kroah-Hartman

From: Marek Behún <[email protected]>

commit 823868fceae3bac07cf5eccb128d6916e7a5ae9d upstream.

This is a cleanup and fix of the patch by Ken Ma <[email protected]>.

Fix the mpp definitions according to newest revision of the specification:
- northbridge:
fix pmic1 gpio number to 7
fix pmic0 gpio number to 6
- southbridge
split pcie1 group bit mask to BIT(5) and BIT(9) fix ptp group bit mask to BIT(11) | BIT(12) | BIT(13) add smi group with bit mask BIT(4)

[gregory: split the pcie group in 2, as at hardware level they can be configured separately]

---
 Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt |   18 +++++++---
 drivers/pinctrl/mvebu/pinctrl-armada-37xx.c                               |   10 +++--
 2 files changed, 19 insertions(+), 9 deletions(-)
Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt +13 -5
@@ -58,11 +58,11 @@ group pwm3
  - functions pwm, gpio
 
 group pmic1
- - pin 17
+ - pin 7
  - functions pmic, gpio
 
 group pmic0
- - pin 16
+ - pin 6
  - functions pmic, gpio
 
 group i2c2
@@ -112,17 +112,25 @@ group usb2_drvvbus1
  - functions drvbus, gpio
 
 group sdio_sb
- - pins 60-64
+ - pins 60-65
  - functions sdio, gpio
 
 group rgmii
- - pins 42-55
+ - pins 42-53
  - functions mii, gpio
 
 group pcie1
- - pins 39-40
+ - pins 39
+ - functions pcie, gpio
+
+group pcie1_clkreq
+ - pins 40
  - functions pcie, gpio
 
+group smi
+ - pins 54-55
+ - functions smi, gpio
+
 group ptp
  - pins 56-58
  - functions ptp, gpio
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c +6 -4
@@ -170,8 +170,8 @@ static struct armada_37xx_pin_group arma
 	PIN_GRP_GPIO("pwm1", 12, 1, BIT(4), "pwm"),
 	PIN_GRP_GPIO("pwm2", 13, 1, BIT(5), "pwm"),
 	PIN_GRP_GPIO("pwm3", 14, 1, BIT(6), "pwm"),
-	PIN_GRP_GPIO("pmic1", 17, 1, BIT(7), "pmic"),
-	PIN_GRP_GPIO("pmic0", 16, 1, BIT(8), "pmic"),
+	PIN_GRP_GPIO("pmic1", 7, 1, BIT(7), "pmic"),
+	PIN_GRP_GPIO("pmic0", 6, 1, BIT(8), "pmic"),
 	PIN_GRP_GPIO("i2c2", 2, 2, BIT(9), "i2c"),
 	PIN_GRP_GPIO("i2c1", 0, 2, BIT(10), "i2c"),
 	PIN_GRP_GPIO("spi_cs1", 17, 1, BIT(12), "spi"),
@@ -195,8 +195,10 @@ static struct armada_37xx_pin_group arma
 	PIN_GRP_GPIO("usb2_drvvbus1", 1, 1, BIT(1), "drvbus"),
 	PIN_GRP_GPIO("sdio_sb", 24, 6, BIT(2), "sdio"),
 	PIN_GRP_GPIO("rgmii", 6, 12, BIT(3), "mii"),
-	PIN_GRP_GPIO("pcie1", 3, 2, BIT(4), "pcie"),
-	PIN_GRP_GPIO("ptp", 20, 3, BIT(5), "ptp"),
+	PIN_GRP_GPIO("smi", 18, 2, BIT(4), "smi"),
+	PIN_GRP_GPIO("pcie1", 3, 1, BIT(5), "pcie"),
+	PIN_GRP_GPIO("pcie1_clkreq", 4, 1, BIT(9), "pcie"),
+	PIN_GRP_GPIO("ptp", 20, 3, BIT(11) | BIT(12) | BIT(13), "ptp"),
 	PIN_GRP("ptp_clk", 21, 1, BIT(6), "ptp", "mii"),
 	PIN_GRP("ptp_trig", 22, 1, BIT(7), "ptp", "mii"),
 	PIN_GRP_GPIO_3("mii_col", 23, 1, BIT(8) | BIT(14), 0, BIT(8), BIT(14),
author maintainer
#33 lore raw

PATCH 33/69 pinctrl: armada-37xx: add missing pin: PCIe1 Wakeup

In reply to Greg Kroah-Hartman

From: Gregory CLEMENT <[email protected]>

commit 4d98fbaacd79a82f408febb66a9c42fe42361b16 upstream.

Declare the PCIe1 Wakeup which was initially missing.

---
 drivers/pinctrl/mvebu/pinctrl-armada-37xx.c |    1 +
 1 file changed, 1 insertion(+)
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c +1 -0
@@ -198,6 +198,7 @@ static struct armada_37xx_pin_group arma
 	PIN_GRP_GPIO("smi", 18, 2, BIT(4), "smi"),
 	PIN_GRP_GPIO("pcie1", 3, 1, BIT(5), "pcie"),
 	PIN_GRP_GPIO("pcie1_clkreq", 4, 1, BIT(9), "pcie"),
+	PIN_GRP_GPIO("pcie1_wakeup", 5, 1, BIT(10), "pcie"),
 	PIN_GRP_GPIO("ptp", 20, 3, BIT(11) | BIT(12) | BIT(13), "ptp"),
 	PIN_GRP("ptp_clk", 21, 1, BIT(6), "ptp", "mii"),
 	PIN_GRP("ptp_trig", 22, 1, BIT(7), "ptp", "mii"),
author maintainer
#6 lore raw

PATCH 6/69 binder: fix test regression due to sender_euid change

In reply to Greg Kroah-Hartman

From: Todd Kjos <[email protected]>

commit c21a80ca0684ec2910344d72556c816cb8940c01 upstream.

This is a partial revert of commit
29bc22ac5e5b ("binder: use euid from cred instead of using task"). Setting sender_euid using proc->cred caused some Android system test regressions that need further investigation. It is a partial reversion because subsequent patches rely on proc->cred.

Fixes 29bc22ac5e5b ("binder: use euid from cred instead of using task")
Change-Id I9b1769a3510fed250bb21859ef8beebabe034c66
---
 drivers/android/binder.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/android/binder.c +1 -1
@@ -2966,7 +2966,7 @@ static void binder_transaction(struct bi
 		t->from = thread;
 	else
 		t->from = NULL;
-	t->sender_euid = proc->cred->euid;
+	t->sender_euid = task_euid(proc->tsk);
 	t->to_proc = target_proc;
 	t->to_thread = target_thread;
 	t->code = tr->code;
author maintainer
#7 lore raw

PATCH 7/69 ALSA: ctxfi: Fix out-of-range access

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

commit 76c47183224c86e4011048b80f0e2d0d166f01c2 upstream.

The master and next_conj of rcs_ops are used for iterating the resource list entries, and currently those are supposed to return the current value. The problem is that next_conf may go over the last entry before the loop abort condition is evaluated, and it may return the "current" value that is beyond the array size. It was caught recently as a GPF, for example.

Those return values are, however, never actually evaluated, hence basically we don't have to consider the current value as the return at all. By dropping those return values, the potential out-of-range access above is also fixed automatically.

This patch changes the return type of master and next_conj callbacks to void and drop the superfluous code accordingly.

---
 sound/pci/ctxfi/ctamixer.c   |   14 ++++++--------
 sound/pci/ctxfi/ctdaio.c     |   16 ++++++++--------
 sound/pci/ctxfi/ctresource.c |    7 +++----
 sound/pci/ctxfi/ctresource.h |    4 ++--
 sound/pci/ctxfi/ctsrc.c      |    7 +++----
 5 files changed, 22 insertions(+), 26 deletions(-)
sound/pci/ctxfi/ctamixer.c +6 -8
@@ -27,16 +27,15 @@
 
 #define BLANK_SLOT		4094
 
-static int amixer_master(struct rsc *rsc)
+static void amixer_master(struct rsc *rsc)
 {
 	rsc->conj = 0;
-	return rsc->idx = container_of(rsc, struct amixer, rsc)->idx[0];
+	rsc->idx = container_of(rsc, struct amixer, rsc)->idx[0];
 }
 
-static int amixer_next_conj(struct rsc *rsc)
+static void amixer_next_conj(struct rsc *rsc)
 {
 	rsc->conj++;
-	return container_of(rsc, struct amixer, rsc)->idx[rsc->conj];
 }
 
 static int amixer_index(const struct rsc *rsc)
@@ -335,16 +334,15 @@ int amixer_mgr_destroy(struct amixer_mgr
 
 /* SUM resource management */
 
-static int sum_master(struct rsc *rsc)
+static void sum_master(struct rsc *rsc)
 {
 	rsc->conj = 0;
-	return rsc->idx = container_of(rsc, struct sum, rsc)->idx[0];
+	rsc->idx = container_of(rsc, struct sum, rsc)->idx[0];
 }
 
-static int sum_next_conj(struct rsc *rsc)
+static void sum_next_conj(struct rsc *rsc)
 {
 	rsc->conj++;
-	return container_of(rsc, struct sum, rsc)->idx[rsc->conj];
 }
 
 static int sum_index(const struct rsc *rsc)
sound/pci/ctxfi/ctdaio.c +8 -8
@@ -55,12 +55,12 @@ static struct daio_rsc_idx idx_20k2[NUM_
 	[SPDIFIO] = {.left = 0x05, .right = 0x85},
 };
 
-static int daio_master(struct rsc *rsc)
+static void daio_master(struct rsc *rsc)
 {
 	/* Actually, this is not the resource index of DAIO.
 	 * For DAO, it is the input mapper index. And, for DAI,
 	 * it is the output time-slot index. */
-	return rsc->conj = rsc->idx;
+	rsc->conj = rsc->idx;
 }
 
 static int daio_index(const struct rsc *rsc)
@@ -68,19 +68,19 @@ static int daio_index(const struct rsc *
 	return rsc->conj;
 }
 
-static int daio_out_next_conj(struct rsc *rsc)
+static void daio_out_next_conj(struct rsc *rsc)
 {
-	return rsc->conj += 2;
+	rsc->conj += 2;
 }
 
-static int daio_in_next_conj_20k1(struct rsc *rsc)
+static void daio_in_next_conj_20k1(struct rsc *rsc)
 {
-	return rsc->conj += 0x200;
+	rsc->conj += 0x200;
 }
 
-static int daio_in_next_conj_20k2(struct rsc *rsc)
+static void daio_in_next_conj_20k2(struct rsc *rsc)
 {
-	return rsc->conj += 0x100;
+	rsc->conj += 0x100;
 }
 
 static const struct rsc_ops daio_out_rsc_ops = {
sound/pci/ctxfi/ctresource.c +3 -4
@@ -113,18 +113,17 @@ static int audio_ring_slot(const struct
     return (rsc->conj << 4) + offset_in_audio_slot_block[rsc->type];
 }
 
-static int rsc_next_conj(struct rsc *rsc)
+static void rsc_next_conj(struct rsc *rsc)
 {
 	unsigned int i;
 	for (i = 0; (i < 8) && (!(rsc->msr & (0x1 << i))); )
 		i++;
 	rsc->conj += (AUDIO_SLOT_BLOCK_NUM >> i);
-	return rsc->conj;
 }
 
-static int rsc_master(struct rsc *rsc)
+static void rsc_master(struct rsc *rsc)
 {
-	return rsc->conj = rsc->idx;
+	rsc->conj = rsc->idx;
 }
 
 static const struct rsc_ops rsc_generic_ops = {
sound/pci/ctxfi/ctresource.h +2 -2
@@ -43,8 +43,8 @@ struct rsc {
 };
 
 struct rsc_ops {
-	int (*master)(struct rsc *rsc);	/* Move to master resource */
-	int (*next_conj)(struct rsc *rsc); /* Move to next conjugate resource */
+	void (*master)(struct rsc *rsc); /* Move to master resource */
+	void (*next_conj)(struct rsc *rsc); /* Move to next conjugate resource */
 	int (*index)(const struct rsc *rsc); /* Return the index of resource */
 	/* Return the output slot number */
 	int (*output_slot)(const struct rsc *rsc);
sound/pci/ctxfi/ctsrc.c +3 -4
@@ -594,16 +594,15 @@ int src_mgr_destroy(struct src_mgr *src_
 
 /* SRCIMP resource manager operations */
 
-static int srcimp_master(struct rsc *rsc)
+static void srcimp_master(struct rsc *rsc)
 {
 	rsc->conj = 0;
-	return rsc->idx = container_of(rsc, struct srcimp, rsc)->idx[0];
+	rsc->idx = container_of(rsc, struct srcimp, rsc)->idx[0];
 }
 
-static int srcimp_next_conj(struct rsc *rsc)
+static void srcimp_next_conj(struct rsc *rsc)
 {
 	rsc->conj++;
-	return container_of(rsc, struct srcimp, rsc)->idx[rsc->conj];
 }
 
 static int srcimp_index(const struct rsc *rsc)
author maintainer
#8 lore raw

PATCH 8/69 media: cec: copy sequence field for the reply

In reply to Greg Kroah-Hartman

From: Hans Verkuil <[email protected]>

commit 13cbaa4c2b7bf9f8285e1164d005dbf08244ecd5 upstream.

When the reply for a non-blocking transmit arrives, the sequence field for that reply was never filled in, so userspace would have no way of associating the reply to the original transmit.

Copy the sequence field to ensure that this is now possible.

Fixes 0dbacebede1e ([media] cec: move the CEC framework out of staging and to media)
---
 drivers/media/cec/cec-adap.c |    1 +
 1 file changed, 1 insertion(+)
drivers/media/cec/cec-adap.c +1 -0
@@ -1146,6 +1146,7 @@ void cec_received_msg_ts(struct cec_adap
 			if (abort)
 				dst->rx_status |= CEC_RX_STATUS_FEATURE_ABORT;
 			msg->flags = dst->flags;
+			msg->sequence = dst->sequence;
 			/* Remove it from the wait_queue */
 			list_del_init(&data->list);
 
author maintainer
#46 lore raw

PATCH 46/69 scsi: mpt3sas: Fix kernel panic during drive powercycle test

In reply to Greg Kroah-Hartman

From: Sreekanth Reddy <[email protected]>

[ Upstream commit 0ee4ba13e09c9d9c1cb6abb59da8295d9952328b ]

While looping over shost's sdev list it is possible that one of the drives is getting removed and its sas_target object is freed but its sdev object remains intact.

Consequently, a kernel panic can occur while the driver is trying to access the sas_address field of sas_target object without also checking the sas_target object for NULL.

Fixes f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/mpt3sas/mpt3sas_scsih.c +1 -1
index add699b01836f..d899f216245e5 100644
@@ -3364,7 +3364,7 @@ _scsih_ublock_io_device(struct MPT3SAS_ADAPTER *ioc, u64 sas_address)
 
 	shost_for_each_device(sdev, ioc->shost) {
 		sas_device_priv_data = sdev->hostdata;
-		if (!sas_device_priv_data)
+		if (!sas_device_priv_data || !sas_device_priv_data->sas_target)
 			continue;
 		if (sas_device_priv_data->sas_target->sas_address
 		    != sas_address)
Signature · 1 line
2.33.0

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 4.19.219-rc1 review

This is the start of the stable review cycle for the 4.19.219 release. There are 69 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.219-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.19.219-rc1

Juergen Gross <[email protected]>
tty: hvc: replace BUG_ON() with negative return value

Juergen Gross <[email protected]>
xen/netfront: don't trust the backend response data blindly

Juergen Gross <[email protected]>
xen/netfront: disentangle tx_skb_freelist

Juergen Gross <[email protected]>
xen/netfront: don't read data from request on the ring page

Juergen Gross <[email protected]>
xen/netfront: read response from backend only once

Juergen Gross <[email protected]>
xen/blkfront: don't trust the backend response data blindly

Juergen Gross <[email protected]>
xen/blkfront: don't take local copy of a request from the ring page

Juergen Gross <[email protected]>
xen/blkfront: read response from backend only once

Juergen Gross <[email protected]>
xen: sync include/xen/interface/io/ring.h with Xen's newest version

Miklos Szeredi <[email protected]>
fuse: release pipe buf after last use

Lin Ma <[email protected]>
NFC: add NCI_UNREG flag to eliminate the race

Nadav Amit <[email protected]>
hugetlbfs: flush TLBs correctly after huge_pmd_unshare

David Hildenbrand <[email protected]>
s390/mm: validate VMA in PGSTE manipulation functions

Steven Rostedt (VMware) <[email protected]>
tracing: Check pid filtering when creating events

Stefano Garzarella <[email protected]>
vhost/vsock: fix incorrect used length reported to the guest

Guangbin Huang <[email protected]>
net: hns3: fix VF RSS failed problem after PF enable multi-TCs

Tony Lu <[email protected]>
net/smc: Don't call clcsock shutdown twice when smc shutdown

Huang Pei <[email protected]>
MIPS: use 3-level pgtable for 64KB page size on MIPS_VA_BITS_48

Eric Dumazet <[email protected]>
tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows

Thomas Zeitlhofer <[email protected]>
PM: hibernate: use correct mode for swsusp_close()

Tony Lu <[email protected]>
net/smc: Ensure the active closing peer first closes clcsock

Eric Dumazet <[email protected]>
ipv6: fix typos in __ip6_finish_output()

Dan Carpenter <[email protected]>
drm/vc4: fix error code in vc4_create_object()

Sreekanth Reddy <[email protected]>
scsi: mpt3sas: Fix kernel panic during drive powercycle test

Takashi Iwai <[email protected]>
ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE

Trond Myklebust <[email protected]>
NFSv42: Don't fail clone() unless the OP_CLONE operation failed

Peng Fan <[email protected]>
firmware: arm_scmi: pm: Propagate return value to caller

Alexander Aring <[email protected]>

    net: ieee802154: handle iftypes as u32

Takashi Iwai <[email protected]>
ASoC: topology: Add missing rwsem around snd_ctl_remove() calls

Srinivas Kandagatla <[email protected]>
ASoC: qdsp6: q6routing: Conditionally reset FrontEnd Mixer

Florian Fainelli <[email protected]>
ARM: dts: BCM5301X: Add interrupt properties to GPIO node

Florian Fainelli <[email protected]>
ARM: dts: BCM5301X: Fix I2C controller interrupt

yangxingwu <[email protected]>
netfilter: ipvs: Fix reuse connection if RS weight is 0

Marek Behún <[email protected]>
arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function

Miquel Raynal <[email protected]>
arm64: dts: marvell: armada-37xx: declare PCIe reset pin

Marek Behún <[email protected]>
pinctrl: armada-37xx: Correct PWM pins definitions

Gregory CLEMENT <[email protected]>
pinctrl: armada-37xx: add missing pin: PCIe1 Wakeup

Marek Behún <[email protected]>
pinctrl: armada-37xx: Correct mpp definitions

Pali Rohár <[email protected]>
PCI: aardvark: Fix checking for link up via LTSSM state

Pali Rohár <[email protected]>
PCI: aardvark: Fix link training

Pali Rohár <[email protected]>
PCI: aardvark: Fix PCIe Max Payload Size setting

Pali Rohár <[email protected]>
PCI: aardvark: Configure PCIe resources from 'ranges' DT property

Pali Rohár <[email protected]>
PCI: aardvark: Update comment about disabling link training

Pali Rohár <[email protected]>
PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link()

Pali Rohár <[email protected]>
PCI: aardvark: Fix compilation on s390

Pali Rohár <[email protected]>
PCI: aardvark: Don't touch PCIe registers if no card connected

Pali Rohár <[email protected]>
PCI: aardvark: Indicate error in 'val' when config read fails

Pali Rohár <[email protected]>
PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros

Pali Rohár <[email protected]>
PCI: aardvark: Issue PERST via GPIO

Marek Behún <[email protected]>
PCI: aardvark: Improve link training

Pali Rohár <[email protected]>
PCI: aardvark: Train link immediately after enabling training

Remi Pommarel <[email protected]>
PCI: aardvark: Wait for endpoint to be ready before training link

Wen Yang <[email protected]>
PCI: aardvark: Fix a leaked reference by adding missing of_node_put()

David Hildenbrand <[email protected]>
proc/vmcore: fix clearing user buffer by properly using clear_user()

Randy Dunlap <[email protected]>
xtensa: use CONFIG_USE_OF instead of CONFIG_OF

Steven Rostedt (VMware) <[email protected]>
tracing: Fix pid filtering when triggers are attached

Stefano Stabellini <[email protected]>
xen: detect uninitialized xenbus in xenbus_init

Stefano Stabellini <[email protected]>
xen: don't continue xenstore initialization in case of errors

Miklos Szeredi <[email protected]>
fuse: fix page stealing

Dan Carpenter <[email protected]>
staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect()

Jason Gerecke <[email protected]>
HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts

Hans Verkuil <[email protected]>
media: cec: copy sequence field for the reply

Takashi Iwai <[email protected]>
ALSA: ctxfi: Fix out-of-range access

Todd Kjos <[email protected]>
binder: fix test regression due to sender_euid change

Mathias Nyman <[email protected]>
usb: hub: Fix locking issues with address0_mutex

Mathias Nyman <[email protected]>
usb: hub: Fix usb enumeration issue due to address0 race

Nathan Chancellor <[email protected]>
usb: dwc2: hcd_queue: Fix use of floating point literal

Mingjie Zhang <[email protected]>
USB: serial: option: add Fibocom FM101-GL variants

Daniele Palmas <[email protected]>

    USB: serial: option: add Telit LE910S1 0x9200 composition

-------------

Diffstat:

 .../pinctrl/marvell,armada-37xx-pinctrl.txt        |  26 +-
 Documentation/networking/ipvs-sysctl.txt           |   3 +-
 Makefile                                           |   4 +-
 arch/arm/boot/dts/bcm5301x.dtsi                    |   4 +-
 arch/arm/include/asm/tlb.h                         |   8 +
 arch/arm/mach-socfpga/core.h                       |   2 +-
 arch/arm/mach-socfpga/platsmp.c                    |   8 +-
 arch/arm64/boot/dts/marvell/armada-3720-db.dts     |   3 +
 .../boot/dts/marvell/armada-3720-espressobin.dts   |   3 +
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi       |   9 +
 arch/ia64/include/asm/tlb.h                        |  10 +
 arch/mips/Kconfig                                  |   2 +-
 arch/s390/include/asm/tlb.h                        |  16 +
 arch/s390/mm/pgtable.c                             |  13 +
 arch/sh/include/asm/tlb.h                          |  10 +
 arch/um/include/asm/tlb.h                          |  12 +
 arch/xtensa/include/asm/vectors.h                  |   2 +-
 arch/xtensa/kernel/setup.c                         |  12 +-
 arch/xtensa/mm/mmu.c                               |   2 +-
 drivers/android/binder.c                           |   2 +-
 drivers/block/xen-blkfront.c                       | 126 ++++--
 drivers/firmware/arm_scmi/scmi_pm_domain.c         |   4 +-
 drivers/gpu/drm/vc4/vc4_bo.c                       |   2 +-
 drivers/hid/wacom_wac.c                            |   8 +-
 drivers/hid/wacom_wac.h                            |   1 +
 drivers/media/cec/cec-adap.c                       |   1 +
 .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c  |   4 +-
 drivers/net/xen-netfront.c                         | 257 +++++++-----
 drivers/pci/controller/pci-aardvark.c              | 436 ++++++++++++++++++---
 drivers/pinctrl/mvebu/pinctrl-armada-37xx.c        |  28 +-
 drivers/scsi/mpt3sas/mpt3sas_scsih.c               |   2 +-
 drivers/staging/rtl8192e/rtl8192e/rtl_core.c       |   3 +-
 drivers/tty/hvc/hvc_xen.c                          |  17 +-
 drivers/usb/core/hub.c                             |  23 +-
 drivers/usb/dwc2/hcd_queue.c                       |   2 +-
 drivers/usb/serial/option.c                        |   5 +
 drivers/vhost/vsock.c                              |   2 +-
 drivers/xen/xenbus/xenbus_probe.c                  |  27 +-
 fs/fuse/dev.c                                      |  14 +-
 fs/nfs/nfs42xdr.c                                  |   3 +-
 fs/proc/vmcore.c                                   |  15 +-
 include/asm-generic/tlb.h                          |   2 +
 include/net/nfc/nci_core.h                         |   1 +
 include/net/nl802154.h                             |   7 +-
 include/xen/interface/io/ring.h                    | 293 +++++++-------
 kernel/power/hibernate.c                           |   6 +-
 kernel/trace/trace.h                               |  24 +-
 kernel/trace/trace_events.c                        |   7 +
 mm/hugetlb.c                                       |  23 +-
 mm/memory.c                                        |  10 +
 net/ipv4/tcp_cubic.c                               |   5 +-
 net/ipv6/ip6_output.c                              |   2 +-
 net/netfilter/ipvs/ip_vs_core.c                    |   8 +-
 net/nfc/nci/core.c                                 |  19 +-
 net/smc/af_smc.c                                   |   8 +-
 net/smc/smc_close.c                                |   6 +
 sound/pci/ctxfi/ctamixer.c                         |  14 +-
 sound/pci/ctxfi/ctdaio.c                           |  16 +-
 sound/pci/ctxfi/ctresource.c                       |   7 +-
 sound/pci/ctxfi/ctresource.h                       |   4 +-
 sound/pci/ctxfi/ctsrc.c                            |   7 +-
 sound/soc/qcom/qdsp6/q6routing.c                   |   6 +-
 sound/soc/soc-topology.c                           |   3 +
 63 files changed, 1157 insertions(+), 452 deletions(-)
author maintainer
#35 lore raw

PATCH 35/69 arm64: dts: marvell: armada-37xx: declare PCIe reset pin

From: Miquel Raynal <[email protected]>

commit a5470af981a0cc14a650af8da5186668971a4fc8 upstream.

One pin can be muxed as PCIe endpoint card reset.

---
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi |    9 +++++++++
 1 file changed, 9 insertions(+)
arch/arm64/boot/dts/marvell/armada-37xx.dtsi +9 -0
@@ -254,6 +254,15 @@
 					function = "mii";
 				};
 
+				pcie_reset_pins: pcie-reset-pins {
+					groups = "pcie1";
+					function = "pcie";
+				};
+
+				pcie_clkreq_pins: pcie-clkreq-pins {
+					groups = "pcie1_clkreq";
+					function = "pcie";
+				};
 			};
 
 			eth0: ethernet@30000 {
author maintainer
#45 lore raw

PATCH 45/69 ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

[ Upstream commit 187bea472600dcc8d2eb714335053264dd437172 ]

When CONFIG_FORTIFY_SOURCE is set, memcpy() checks the potential buffer overflow and panics. The code in sofcpga bootstrapping contains the memcpy() calls are mistakenly translated as the shorter size, hence it triggers a panic as if it were overflowing.

This patch changes the secondary_trampoline and *_end definitions to arrays for avoiding the false-positive crash above.

---
 arch/arm/mach-socfpga/core.h    | 2 +-
 arch/arm/mach-socfpga/platsmp.c | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)
arch/arm/mach-socfpga/core.h +1 -1
index 65e1817d8afe6..692a287a8712d 100644
@@ -48,7 +48,7 @@ extern void __iomem *sdr_ctl_base_addr;
 u32 socfpga_sdram_self_refresh(u32 sdr_base);
 extern unsigned int socfpga_sdram_self_refresh_sz;
 
-extern char secondary_trampoline, secondary_trampoline_end;
+extern char secondary_trampoline[], secondary_trampoline_end[];
 
 extern unsigned long socfpga_cpu1start_addr;
 
arch/arm/mach-socfpga/platsmp.c +4 -4
index 0ee76772b5074..a272999ce04b9 100644
@@ -31,14 +31,14 @@
 
 static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
+	int trampoline_size = secondary_trampoline_end - secondary_trampoline;
 
 	if (socfpga_cpu1start_addr) {
 		/* This will put CPU #1 into reset. */
 		writel(RSTMGR_MPUMODRST_CPU1,
 		       rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
 
-		memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+		memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);
 
 		writel(__pa_symbol(secondary_startup),
 		       sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff));
@@ -56,12 +56,12 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static int socfpga_a10_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
+	int trampoline_size = secondary_trampoline_end - secondary_trampoline;
 
 	if (socfpga_cpu1start_addr) {
 		writel(RSTMGR_MPUMODRST_CPU1, rst_manager_base_addr +
 		       SOCFPGA_A10_RSTMGR_MODMPURST);
-		memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+		memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);
 
 		writel(__pa_symbol(secondary_startup),
 		       sys_manager_base_addr + (socfpga_cpu1start_addr & 0x00000fff));
Signature · 1 line
2.33.0
author maintainer
#54 lore raw

PATCH 54/69 net: hns3: fix VF RSS failed problem after PF enable multi-TCs

In reply to Greg Kroah-Hartman

From: Guangbin Huang <[email protected]>

[ Upstream commit 8d2ad993aa05c0768f00c886c9d369cd97a337ac ]

When PF is set to multi-TCs and configured mapping relationship between priorities and TCs, the hardware will active these settings for this PF and its VFs.

In this case when VF just uses one TC and its rx packets contain priority, and if the priority is not mapped to TC0, as other TCs of VF is not valid, hardware always put this kind of packets to the queue 0. It cause this kind of packets of VF can not be used RSS function.

To fix this problem, set tc mode of all unused TCs of VF to the setting of TC0, then rx packet with priority which map to unused TC will be direct to TC0.

Fixes e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
---
 drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +2 -2
index fd5375b5991bb..a257bf635bc24 100644
@@ -451,9 +451,9 @@ static int hclgevf_set_rss_tc_mode(struct hclgevf_dev *hdev,  u16 rss_size)
 	roundup_size = ilog2(roundup_size);
 
 	for (i = 0; i < HCLGEVF_MAX_TC_NUM; i++) {
-		tc_valid[i] = !!(hdev->hw_tc_map & BIT(i));
+		tc_valid[i] = 1;
 		tc_size[i] = roundup_size;
-		tc_offset[i] = rss_size * i;
+		tc_offset[i] = (hdev->hw_tc_map & BIT(i)) ? rss_size * i : 0;
 	}
 
 	hclgevf_cmd_setup_basic_desc(&desc, HCLGEVF_OPC_RSS_TC_MODE, false);
Signature · 1 line
2.33.0
author maintainer
#55 lore raw

PATCH 55/69 vhost/vsock: fix incorrect used length reported to the guest

In reply to Greg Kroah-Hartman

From: Stefano Garzarella <[email protected]>

commit 49d8c5ffad07ca014cfae72a1b9b8c52b6ad9cb8 upstream.

The "used length" reported by calling vhost_add_used() must be the number of bytes written by the device (using "in" buffers).

In vhost_vsock_handle_tx_kick() the device only reads the guest buffers (they are all "out" buffers), without writing anything, so we must pass 0 as "used length" to comply virtio spec.

---
 drivers/vhost/vsock.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/vhost/vsock.c +1 -1
@@ -490,7 +490,7 @@ static void vhost_vsock_handle_tx_kick(s
 			virtio_transport_free_pkt(pkt);
 
 		len += sizeof(pkt->hdr);
-		vhost_add_used(vq, head, len);
+		vhost_add_used(vq, head, 0);
 		total_len += len;
 		added = true;
 	} while(likely(!vhost_exceeds_weight(vq, ++pkts, total_len)));
author maintainer
#56 lore raw

PATCH 56/69 tracing: Check pid filtering when creating events

In reply to Greg Kroah-Hartman

From: Steven Rostedt (VMware) <[email protected]>

commit 6cb206508b621a9a0a2c35b60540e399225c8243 upstream.

When pid filtering is activated in an instance, all of the events trace files for that instance has the PID_FILTER flag set. This determines whether or not pid filtering needs to be done on the event, otherwise the event is executed as normal.

If pid filtering is enabled when an event is created (via a dynamic event or modules), its flag is not updated to reflect the current state, and the events are not filtered properly.

Fixes 3fdaf80f4a836 ("tracing: Implement event pid filtering")
---
 kernel/trace/trace_events.c |    7 +++++++
 1 file changed, 7 insertions(+)
kernel/trace/trace_events.c +7 -0
@@ -2255,12 +2255,19 @@ static struct trace_event_file *
 trace_create_new_event(struct trace_event_call *call,
 		       struct trace_array *tr)
 {
+	struct trace_pid_list *pid_list;
 	struct trace_event_file *file;
 
 	file = kmem_cache_alloc(file_cachep, GFP_TRACE);
 	if (!file)
 		return NULL;
 
+	pid_list = rcu_dereference_protected(tr->filtered_pids,
+					     lockdep_is_held(&event_mutex));
+
+	if (pid_list)
+		file->flags |= EVENT_FILE_FL_PID_FILTER;
+
 	file->event_call = call;
 	file->tr = tr;
 	atomic_set(&file->sm_ref, 0);
author maintainer
#59 lore raw

PATCH 59/69 NFC: add NCI_UNREG flag to eliminate the race

In reply to Greg Kroah-Hartman

From: Lin Ma <[email protected]>

commit 48b71a9e66c2eab60564b1b1c85f4928ed04e406 upstream.

There are two sites that calls queue_work() after the destroy_workqueue() and lead to possible UAF.

The first site is nci_send_cmd(), which can happen after the nci_close_device as below

nfcmrvl_nci_unregister_dev   |  nfc_genl_dev_up
  nci_close_device           |
    flush_workqueue          |
    del_timer_sync           |
  nci_unregister_device      |    nfc_get_device
    destroy_workqueue        |    nfc_dev_up
    nfc_unregister_device    |      nci_dev_up
      device_del             |        nci_open_device
                             |          __nci_request
                             |            nci_send_cmd
                             |              queue_work !!!

Another site is nci_cmd_timer, awaked by the nci_cmd_work from the nci_send_cmd.

  ...                        |  ...
  nci_unregister_device      |  queue_work
    destroy_workqueue        |
    nfc_unregister_device    |  ...
      device_del             |  nci_cmd_work
                             |  mod_timer
                             |  ...
                             |  nci_cmd_timer
                             |    queue_work !!!

For the above two UAF, the root cause is that the nfc_dev_up can race between the nci_unregister_device routine. Therefore, this patch introduce NCI_UNREG flag to easily eliminate the possible race. In addition, the mutex_lock in nci_close_device can act as a barrier.

---
 include/net/nfc/nci_core.h |    1 +
 net/nfc/nci/core.c         |   19 +++++++++++++++++--
 2 files changed, 18 insertions(+), 2 deletions(-)
include/net/nfc/nci_core.h +1 -0
@@ -42,6 +42,7 @@ enum nci_flag {
 	NCI_UP,
 	NCI_DATA_EXCHANGE,
 	NCI_DATA_EXCHANGE_TO,
+	NCI_UNREG,
 };
 
 /* NCI device states */
net/nfc/nci/core.c +17 -2
@@ -485,6 +485,11 @@ static int nci_open_device(struct nci_de
 
 	mutex_lock(&ndev->req_lock);
 
+	if (test_bit(NCI_UNREG, &ndev->flags)) {
+		rc = -ENODEV;
+		goto done;
+	}
+
 	if (test_bit(NCI_UP, &ndev->flags)) {
 		rc = -EALREADY;
 		goto done;
@@ -548,6 +553,10 @@ done:
 static int nci_close_device(struct nci_dev *ndev)
 {
 	nci_req_cancel(ndev, ENODEV);
+
+	/* This mutex needs to be held as a barrier for
+	 * caller nci_unregister_device
+	 */
 	mutex_lock(&ndev->req_lock);
 
 	if (!test_and_clear_bit(NCI_UP, &ndev->flags)) {
@@ -585,8 +594,8 @@ static int nci_close_device(struct nci_d
 	/* Flush cmd wq */
 	flush_workqueue(ndev->cmd_wq);
 
-	/* Clear flags */
-	ndev->flags = 0;
+	/* Clear flags except NCI_UNREG */
+	ndev->flags &= BIT(NCI_UNREG);
 
 	mutex_unlock(&ndev->req_lock);
 
@@ -1268,6 +1277,12 @@ void nci_unregister_device(struct nci_de
 {
 	struct nci_conn_info    *conn_info, *n;
 
+	/* This set_bit is not protected with specialized barrier,
+	 * However, it is fine because the mutex_lock(&ndev->req_lock);
+	 * in nci_close_device() will help to emit one.
+	 */
+	set_bit(NCI_UNREG, &ndev->flags);
+
 	nci_close_device(ndev);
 
 	destroy_workqueue(ndev->cmd_wq);
author maintainer
#61 lore raw

PATCH 61/69 xen: sync include/xen/interface/io/ring.h with Xens newest version

In reply to Greg Kroah-Hartman

From: Juergen Gross <[email protected]>

commit 629a5d87e26fe96bcaab44cbb81f5866af6f7008 upstream.

Sync include/xen/interface/io/ring.h with Xen's newest version in order to get the RING_COPY_RESPONSE() and RING_RESPONSE_PROD_OVERFLOW() macros.

Note that this will correct the wrong license info by adding the missing original copyright notice.

---
 include/xen/interface/io/ring.h |  307 +++++++++++++++++++++-------------------
 1 file changed, 165 insertions(+), 142 deletions(-)
include/xen/interface/io/ring.h +165 -142
@@ -1,21 +1,53 @@
-/* SPDX-License-Identifier: GPL-2.0 */
 /******************************************************************************
  * ring.h
  *
  * Shared producer-consumer ring macros.
  *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
  * Tim Deegan and Andrew Warfield November 2004.
  */
 
 #ifndef __XEN_PUBLIC_IO_RING_H__
 #define __XEN_PUBLIC_IO_RING_H__
 
+/*
+ * When #include'ing this header, you need to provide the following
+ * declaration upfront:
+ * - standard integers types (uint8_t, uint16_t, etc)
+ * They are provided by stdint.h of the standard headers.
+ *
+ * In addition, if you intend to use the FLEX macros, you also need to
+ * provide the following, before invoking the FLEX macros:
+ * - size_t
+ * - memcpy
+ * - grant_ref_t
+ * These declarations are provided by string.h of the standard headers,
+ * and grant_table.h from the Xen public headers.
+ */
+
 #include <xen/interface/grant_table.h>
 
 typedef unsigned int RING_IDX;
 
 /* Round a 32-bit unsigned constant down to the nearest power of two. */
-#define __RD2(_x)  (((_x) & 0x00000002) ? 0x2		       : ((_x) & 0x1))
+#define __RD2(_x)  (((_x) & 0x00000002) ? 0x2                  : ((_x) & 0x1))
 #define __RD4(_x)  (((_x) & 0x0000000c) ? __RD2((_x)>>2)<<2    : __RD2(_x))
 #define __RD8(_x)  (((_x) & 0x000000f0) ? __RD4((_x)>>4)<<4    : __RD4(_x))
 #define __RD16(_x) (((_x) & 0x0000ff00) ? __RD8((_x)>>8)<<8    : __RD8(_x))
@@ -27,82 +59,79 @@ typedef unsigned int RING_IDX;
  * A ring contains as many entries as will fit, rounded down to the nearest
  * power of two (so we can mask with (size-1) to loop around).
  */
-#define __CONST_RING_SIZE(_s, _sz)				\
-	(__RD32(((_sz) - offsetof(struct _s##_sring, ring)) /	\
-		sizeof(((struct _s##_sring *)0)->ring[0])))
-
+#define __CONST_RING_SIZE(_s, _sz) \
+    (__RD32(((_sz) - offsetof(struct _s##_sring, ring)) / \
+	    sizeof(((struct _s##_sring *)0)->ring[0])))
 /*
  * The same for passing in an actual pointer instead of a name tag.
  */
-#define __RING_SIZE(_s, _sz)						\
-	(__RD32(((_sz) - (long)&(_s)->ring + (long)(_s)) / sizeof((_s)->ring[0])))
+#define __RING_SIZE(_s, _sz) \
+    (__RD32(((_sz) - (long)(_s)->ring + (long)(_s)) / sizeof((_s)->ring[0])))
 
 /*
  * Macros to make the correct C datatypes for a new kind of ring.
  *
  * To make a new ring datatype, you need to have two message structures,
- * let's say struct request, and struct response already defined.
+ * let's say request_t, and response_t already defined.
  *
  * In a header where you want the ring datatype declared, you then do:
  *
- *     DEFINE_RING_TYPES(mytag, struct request, struct response);
+ *     DEFINE_RING_TYPES(mytag, request_t, response_t);
  *
  * These expand out to give you a set of types, as you can see below.
  * The most important of these are:
  *
- *     struct mytag_sring      - The shared ring.
- *     struct mytag_front_ring - The 'front' half of the ring.
- *     struct mytag_back_ring  - The 'back' half of the ring.
+ *     mytag_sring_t      - The shared ring.
+ *     mytag_front_ring_t - The 'front' half of the ring.
+ *     mytag_back_ring_t  - The 'back' half of the ring.
  *
  * To initialize a ring in your code you need to know the location and size
  * of the shared memory area (PAGE_SIZE, for instance). To initialise
  * the front half:
  *
- *     struct mytag_front_ring front_ring;
- *     SHARED_RING_INIT((struct mytag_sring *)shared_page);
- *     FRONT_RING_INIT(&front_ring, (struct mytag_sring *)shared_page,
- *		       PAGE_SIZE);
+ *     mytag_front_ring_t front_ring;
+ *     SHARED_RING_INIT((mytag_sring_t *)shared_page);
+ *     FRONT_RING_INIT(&front_ring, (mytag_sring_t *)shared_page, PAGE_SIZE);
  *
  * Initializing the back follows similarly (note that only the front
  * initializes the shared ring):
  *
- *     struct mytag_back_ring back_ring;
- *     BACK_RING_INIT(&back_ring, (struct mytag_sring *)shared_page,
- *		      PAGE_SIZE);
+ *     mytag_back_ring_t back_ring;
+ *     BACK_RING_INIT(&back_ring, (mytag_sring_t *)shared_page, PAGE_SIZE);
  */
 
-#define DEFINE_RING_TYPES(__name, __req_t, __rsp_t)			\
-									\
-/* Shared ring entry */							\
-union __name##_sring_entry {						\
-    __req_t req;							\
-    __rsp_t rsp;							\
-};									\
-									\
-/* Shared ring page */							\
-struct __name##_sring {							\
-    RING_IDX req_prod, req_event;					\
-    RING_IDX rsp_prod, rsp_event;					\
-    uint8_t  pad[48];							\
-    union __name##_sring_entry ring[1]; /* variable-length */		\
-};									\
-									\
-/* "Front" end's private variables */					\
-struct __name##_front_ring {						\
-    RING_IDX req_prod_pvt;						\
-    RING_IDX rsp_cons;							\
-    unsigned int nr_ents;						\
-    struct __name##_sring *sring;					\
-};									\
-									\
-/* "Back" end's private variables */					\
-struct __name##_back_ring {						\
-    RING_IDX rsp_prod_pvt;						\
-    RING_IDX req_cons;							\
-    unsigned int nr_ents;						\
-    struct __name##_sring *sring;					\
-};
-
+#define DEFINE_RING_TYPES(__name, __req_t, __rsp_t)                     \
+                                                                        \
+/* Shared ring entry */                                                 \
+union __name##_sring_entry {                                            \
+    __req_t req;                                                        \
+    __rsp_t rsp;                                                        \
+};                                                                      \
+                                                                        \
+/* Shared ring page */                                                  \
+struct __name##_sring {                                                 \
+    RING_IDX req_prod, req_event;                                       \
+    RING_IDX rsp_prod, rsp_event;                                       \
+    uint8_t __pad[48];                                                  \
+    union __name##_sring_entry ring[1]; /* variable-length */           \
+};                                                                      \
+                                                                        \
+/* "Front" end's private variables */                                   \
+struct __name##_front_ring {                                            \
+    RING_IDX req_prod_pvt;                                              \
+    RING_IDX rsp_cons;                                                  \
+    unsigned int nr_ents;                                               \
+    struct __name##_sring *sring;                                       \
+};                                                                      \
+                                                                        \
+/* "Back" end's private variables */                                    \
+struct __name##_back_ring {                                             \
+    RING_IDX rsp_prod_pvt;                                              \
+    RING_IDX req_cons;                                                  \
+    unsigned int nr_ents;                                               \
+    struct __name##_sring *sring;                                       \
+};                                                                      \
+                                                                        \
 /*
  * Macros for manipulating rings.
  *
@@ -119,105 +148,99 @@ struct __name##_back_ring {						\
  */
 
 /* Initialising empty rings */
-#define SHARED_RING_INIT(_s) do {					\
-    (_s)->req_prod  = (_s)->rsp_prod  = 0;				\
-    (_s)->req_event = (_s)->rsp_event = 1;				\
-    memset((_s)->pad, 0, sizeof((_s)->pad));				\
+#define SHARED_RING_INIT(_s) do {                                       \
+    (_s)->req_prod  = (_s)->rsp_prod  = 0;                              \
+    (_s)->req_event = (_s)->rsp_event = 1;                              \
+    (void)memset((_s)->__pad, 0, sizeof((_s)->__pad));                  \
 } while(0)
 
-#define FRONT_RING_INIT(_r, _s, __size) do {				\
-    (_r)->req_prod_pvt = 0;						\
-    (_r)->rsp_cons = 0;							\
-    (_r)->nr_ents = __RING_SIZE(_s, __size);				\
-    (_r)->sring = (_s);							\
+#define FRONT_RING_ATTACH(_r, _s, _i, __size) do {                      \
+    (_r)->req_prod_pvt = (_i);                                          \
+    (_r)->rsp_cons = (_i);                                              \
+    (_r)->nr_ents = __RING_SIZE(_s, __size);                            \
+    (_r)->sring = (_s);                                                 \
 } while (0)
 
-#define BACK_RING_INIT(_r, _s, __size) do {				\
-    (_r)->rsp_prod_pvt = 0;						\
-    (_r)->req_cons = 0;							\
-    (_r)->nr_ents = __RING_SIZE(_s, __size);				\
-    (_r)->sring = (_s);							\
-} while (0)
+#define FRONT_RING_INIT(_r, _s, __size) FRONT_RING_ATTACH(_r, _s, 0, __size)
 
-/* Initialize to existing shared indexes -- for recovery */
-#define FRONT_RING_ATTACH(_r, _s, __size) do {				\
-    (_r)->sring = (_s);							\
-    (_r)->req_prod_pvt = (_s)->req_prod;				\
-    (_r)->rsp_cons = (_s)->rsp_prod;					\
-    (_r)->nr_ents = __RING_SIZE(_s, __size);				\
+#define BACK_RING_ATTACH(_r, _s, _i, __size) do {                       \
+    (_r)->rsp_prod_pvt = (_i);                                          \
+    (_r)->req_cons = (_i);                                              \
+    (_r)->nr_ents = __RING_SIZE(_s, __size);                            \
+    (_r)->sring = (_s);                                                 \
 } while (0)
 
-#define BACK_RING_ATTACH(_r, _s, __size) do {				\
-    (_r)->sring = (_s);							\
-    (_r)->rsp_prod_pvt = (_s)->rsp_prod;				\
-    (_r)->req_cons = (_s)->req_prod;					\
-    (_r)->nr_ents = __RING_SIZE(_s, __size);				\
-} while (0)
+#define BACK_RING_INIT(_r, _s, __size) BACK_RING_ATTACH(_r, _s, 0, __size)
 
 /* How big is this ring? */
-#define RING_SIZE(_r)							\
+#define RING_SIZE(_r)                                                   \
     ((_r)->nr_ents)
 
 /* Number of free requests (for use on front side only). */
-#define RING_FREE_REQUESTS(_r)						\
+#define RING_FREE_REQUESTS(_r)                                          \
     (RING_SIZE(_r) - ((_r)->req_prod_pvt - (_r)->rsp_cons))
 
 /* Test if there is an empty slot available on the front ring.
  * (This is only meaningful from the front. )
  */
-#define RING_FULL(_r)							\
+#define RING_FULL(_r)                                                   \
     (RING_FREE_REQUESTS(_r) == 0)
 
 /* Test if there are outstanding messages to be processed on a ring. */
-#define RING_HAS_UNCONSUMED_RESPONSES(_r)				\
+#define RING_HAS_UNCONSUMED_RESPONSES(_r)                               \
     ((_r)->sring->rsp_prod - (_r)->rsp_cons)
 
-#define RING_HAS_UNCONSUMED_REQUESTS(_r)				\
-    ({									\
-	unsigned int req = (_r)->sring->req_prod - (_r)->req_cons;	\
-	unsigned int rsp = RING_SIZE(_r) -				\
-			   ((_r)->req_cons - (_r)->rsp_prod_pvt);	\
-	req < rsp ? req : rsp;						\
-    })
+#define RING_HAS_UNCONSUMED_REQUESTS(_r) ({                             \
+    unsigned int req = (_r)->sring->req_prod - (_r)->req_cons;          \
+    unsigned int rsp = RING_SIZE(_r) -                                  \
+        ((_r)->req_cons - (_r)->rsp_prod_pvt);                          \
+    req < rsp ? req : rsp;                                              \
+})
 
 /* Direct access to individual ring elements, by index. */
-#define RING_GET_REQUEST(_r, _idx)					\
+#define RING_GET_REQUEST(_r, _idx)                                      \
     (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].req))
 
+#define RING_GET_RESPONSE(_r, _idx)                                     \
+    (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].rsp))
+
 /*
- * Get a local copy of a request.
+ * Get a local copy of a request/response.
  *
- * Use this in preference to RING_GET_REQUEST() so all processing is
+ * Use this in preference to RING_GET_{REQUEST,RESPONSE}() so all processing is
  * done on a local copy that cannot be modified by the other end.
  *
  * Note that https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145 may cause this
- * to be ineffective where _req is a struct which consists of only bitfields.
+ * to be ineffective where dest is a struct which consists of only bitfields.
  */
-#define RING_COPY_REQUEST(_r, _idx, _req) do {				\
-	/* Use volatile to force the copy into _req. */			\
-	*(_req) = *(volatile typeof(_req))RING_GET_REQUEST(_r, _idx);	\
+#define RING_COPY_(type, r, idx, dest) do {				\
+	/* Use volatile to force the copy into dest. */			\
+	*(dest) = *(volatile typeof(dest))RING_GET_##type(r, idx);	\
 } while (0)
 
-#define RING_GET_RESPONSE(_r, _idx)					\
-    (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].rsp))
+#define RING_COPY_REQUEST(r, idx, req)  RING_COPY_(REQUEST, r, idx, req)
+#define RING_COPY_RESPONSE(r, idx, rsp) RING_COPY_(RESPONSE, r, idx, rsp)
 
 /* Loop termination condition: Would the specified index overflow the ring? */
-#define RING_REQUEST_CONS_OVERFLOW(_r, _cons)				\
+#define RING_REQUEST_CONS_OVERFLOW(_r, _cons)                           \
     (((_cons) - (_r)->rsp_prod_pvt) >= RING_SIZE(_r))
 
 /* Ill-behaved frontend determination: Can there be this many requests? */
-#define RING_REQUEST_PROD_OVERFLOW(_r, _prod)               \
+#define RING_REQUEST_PROD_OVERFLOW(_r, _prod)                           \
     (((_prod) - (_r)->rsp_prod_pvt) > RING_SIZE(_r))
 
-
-#define RING_PUSH_REQUESTS(_r) do {					\
-    virt_wmb(); /* back sees requests /before/ updated producer index */	\
-    (_r)->sring->req_prod = (_r)->req_prod_pvt;				\
+/* Ill-behaved backend determination: Can there be this many responses? */
+#define RING_RESPONSE_PROD_OVERFLOW(_r, _prod)                          \
+    (((_prod) - (_r)->rsp_cons) > RING_SIZE(_r))
+
+#define RING_PUSH_REQUESTS(_r) do {                                     \
+    virt_wmb(); /* back sees requests /before/ updated producer index */\
+    (_r)->sring->req_prod = (_r)->req_prod_pvt;                         \
 } while (0)
 
-#define RING_PUSH_RESPONSES(_r) do {					\
-    virt_wmb(); /* front sees responses /before/ updated producer index */	\
-    (_r)->sring->rsp_prod = (_r)->rsp_prod_pvt;				\
+#define RING_PUSH_RESPONSES(_r) do {                                    \
+    virt_wmb(); /* front sees resps /before/ updated producer index */  \
+    (_r)->sring->rsp_prod = (_r)->rsp_prod_pvt;                         \
 } while (0)
 
 /*
@@ -250,40 +273,40 @@ struct __name##_back_ring {						\
  *  field appropriately.
  */
 
-#define RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(_r, _notify) do {		\
-    RING_IDX __old = (_r)->sring->req_prod;				\
-    RING_IDX __new = (_r)->req_prod_pvt;				\
-    virt_wmb(); /* back sees requests /before/ updated producer index */	\
-    (_r)->sring->req_prod = __new;					\
-    virt_mb(); /* back sees new requests /before/ we check req_event */	\
-    (_notify) = ((RING_IDX)(__new - (_r)->sring->req_event) <		\
-		 (RING_IDX)(__new - __old));				\
-} while (0)
-
-#define RING_PUSH_RESPONSES_AND_CHECK_NOTIFY(_r, _notify) do {		\
-    RING_IDX __old = (_r)->sring->rsp_prod;				\
-    RING_IDX __new = (_r)->rsp_prod_pvt;				\
-    virt_wmb(); /* front sees responses /before/ updated producer index */	\
-    (_r)->sring->rsp_prod = __new;					\
-    virt_mb(); /* front sees new responses /before/ we check rsp_event */	\
-    (_notify) = ((RING_IDX)(__new - (_r)->sring->rsp_event) <		\
-		 (RING_IDX)(__new - __old));				\
-} while (0)
-
-#define RING_FINAL_CHECK_FOR_REQUESTS(_r, _work_to_do) do {		\
-    (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r);			\
-    if (_work_to_do) break;						\
-    (_r)->sring->req_event = (_r)->req_cons + 1;			\
-    virt_mb();								\
-    (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r);			\
-} while (0)
-
-#define RING_FINAL_CHECK_FOR_RESPONSES(_r, _work_to_do) do {		\
-    (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r);			\
-    if (_work_to_do) break;						\
-    (_r)->sring->rsp_event = (_r)->rsp_cons + 1;			\
-    virt_mb();								\
-    (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r);			\
+#define RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(_r, _notify) do {           \
+    RING_IDX __old = (_r)->sring->req_prod;                             \
+    RING_IDX __new = (_r)->req_prod_pvt;                                \
+    virt_wmb(); /* back sees requests /before/ updated producer index */\
+    (_r)->sring->req_prod = __new;                                      \
+    virt_mb(); /* back sees new requests /before/ we check req_event */ \
+    (_notify) = ((RING_IDX)(__new - (_r)->sring->req_event) <           \
+                 (RING_IDX)(__new - __old));                            \
+} while (0)
+
+#define RING_PUSH_RESPONSES_AND_CHECK_NOTIFY(_r, _notify) do {          \
+    RING_IDX __old = (_r)->sring->rsp_prod;                             \
+    RING_IDX __new = (_r)->rsp_prod_pvt;                                \
+    virt_wmb(); /* front sees resps /before/ updated producer index */  \
+    (_r)->sring->rsp_prod = __new;                                      \
+    virt_mb(); /* front sees new resps /before/ we check rsp_event */   \
+    (_notify) = ((RING_IDX)(__new - (_r)->sring->rsp_event) <           \
+                 (RING_IDX)(__new - __old));                            \
+} while (0)
+
+#define RING_FINAL_CHECK_FOR_REQUESTS(_r, _work_to_do) do {             \
+    (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r);                   \
+    if (_work_to_do) break;                                             \
+    (_r)->sring->req_event = (_r)->req_cons + 1;                        \
+    virt_mb();                                                          \
+    (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r);                   \
+} while (0)
+
+#define RING_FINAL_CHECK_FOR_RESPONSES(_r, _work_to_do) do {            \
+    (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r);                  \
+    if (_work_to_do) break;                                             \
+    (_r)->sring->rsp_event = (_r)->rsp_cons + 1;                        \
+    virt_mb();                                                          \
+    (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r);                  \
 } while (0)
 
 
author maintainer
#37 lore raw

PATCH 37/69 netfilter: ipvs: Fix reuse connection if RS weight is 0

In reply to Greg Kroah-Hartman

From: yangxingwu <[email protected]>

[ Upstream commit c95c07836fa4c1767ed11d8eca0769c652760e32 ]

We are changing expire_nodest_conn to work even for reused connections when conn_reuse_mode=0, just as what was done with commit dc7b3eb900aa ("ipvs:
Fix reuse connection if real server is dead").

For controlled and persistent connections, the new connection will get the needed real server depending on the rules in ip_vs_check_template().

Fixes d752c3645717 ("ipvs: allow rescheduling of new connections when port reuse is detected")
---
 Documentation/networking/ipvs-sysctl.txt | 3 +--
 net/netfilter/ipvs/ip_vs_core.c          | 8 ++++----
 2 files changed, 5 insertions(+), 6 deletions(-)
Documentation/networking/ipvs-sysctl.txt +1 -2
index 056898685d408..fc531c29a2e83 100644
@@ -30,8 +30,7 @@ conn_reuse_mode - INTEGER
 
 	0: disable any special handling on port reuse. The new
 	connection will be delivered to the same real server that was
-	servicing the previous connection. This will effectively
-	disable expire_nodest_conn.
+	servicing the previous connection.
 
 	bit 1: enable rescheduling of new connections when it is safe.
 	That is, whenever expire_nodest_conn and for TCP sockets, when
net/netfilter/ipvs/ip_vs_core.c +4 -4
index acaeeaf814415..f20b08db9fe91 100644
@@ -1850,7 +1850,6 @@ ip_vs_in(struct netns_ipvs *ipvs, unsigned int hooknum, struct sk_buff *skb, int
 	struct ip_vs_proto_data *pd;
 	struct ip_vs_conn *cp;
 	int ret, pkts;
-	int conn_reuse_mode;
 	struct sock *sk;
 
 	/* Already marked as IPVS request or reply? */
@@ -1926,15 +1925,16 @@ ip_vs_in(struct netns_ipvs *ipvs, unsigned int hooknum, struct sk_buff *skb, int
 	 */
 	cp = pp->conn_in_get(ipvs, af, skb, &iph);
 
-	conn_reuse_mode = sysctl_conn_reuse_mode(ipvs);
-	if (conn_reuse_mode && !iph.fragoffs && is_new_conn(skb, &iph) && cp) {
+	if (!iph.fragoffs && is_new_conn(skb, &iph) && cp) {
+		int conn_reuse_mode = sysctl_conn_reuse_mode(ipvs);
 		bool old_ct = false, resched = false;
 
 		if (unlikely(sysctl_expire_nodest_conn(ipvs)) && cp->dest &&
 		    unlikely(!atomic_read(&cp->dest->weight))) {
 			resched = true;
 			old_ct = ip_vs_conn_uses_old_conntrack(cp, skb);
-		} else if (is_new_conn_expected(cp, conn_reuse_mode)) {
+		} else if (conn_reuse_mode &&
+			   is_new_conn_expected(cp, conn_reuse_mode)) {
 			old_ct = ip_vs_conn_uses_old_conntrack(cp, skb);
 			if (!atomic_read(&cp->n_control)) {
 				resched = true;
Signature · 1 line
2.33.0
author maintainer
#65 lore raw

PATCH 65/69 xen/netfront: read response from backend only once

In reply to Greg Kroah-Hartman

From: Juergen Gross <[email protected]>

commit 8446066bf8c1f9f7b7412c43fbea0fb87464d75b upstream.

In order to avoid problems in case the backend is modifying a response on the ring page while the frontend has already seen it, just read the response into a local buffer in one go and then operate on that buffer only.

---
 drivers/net/xen-netfront.c |   38 +++++++++++++++++++-------------------
 1 file changed, 19 insertions(+), 19 deletions(-)
drivers/net/xen-netfront.c +19 -19
@@ -389,13 +389,13 @@ static void xennet_tx_buf_gc(struct netf
 		rmb(); /* Ensure we see responses up to 'rp'. */
 
 		for (cons = queue->tx.rsp_cons; cons != prod; cons++) {
-			struct xen_netif_tx_response *txrsp;
+			struct xen_netif_tx_response txrsp;
 
-			txrsp = RING_GET_RESPONSE(&queue->tx, cons);
-			if (txrsp->status == XEN_NETIF_RSP_NULL)
+			RING_COPY_RESPONSE(&queue->tx, cons, &txrsp);
+			if (txrsp.status == XEN_NETIF_RSP_NULL)
 				continue;
 
-			id  = txrsp->id;
+			id  = txrsp.id;
 			skb = queue->tx_skbs[id].skb;
 			if (unlikely(gnttab_query_foreign_access(
 				queue->grant_tx_ref[id]) != 0)) {
@@ -744,7 +744,7 @@ static int xennet_get_extras(struct netf
 			     RING_IDX rp)
 
 {
-	struct xen_netif_extra_info *extra;
+	struct xen_netif_extra_info extra;
 	struct device *dev = &queue->info->netdev->dev;
 	RING_IDX cons = queue->rx.rsp_cons;
 	int err = 0;
@@ -760,24 +760,22 @@ static int xennet_get_extras(struct netf
 			break;
 		}
 
-		extra = (struct xen_netif_extra_info *)
-			RING_GET_RESPONSE(&queue->rx, ++cons);
+		RING_COPY_RESPONSE(&queue->rx, ++cons, &extra);
 
-		if (unlikely(!extra->type ||
-			     extra->type >= XEN_NETIF_EXTRA_TYPE_MAX)) {
+		if (unlikely(!extra.type ||
+			     extra.type >= XEN_NETIF_EXTRA_TYPE_MAX)) {
 			if (net_ratelimit())
 				dev_warn(dev, "Invalid extra type: %d\n",
-					extra->type);
+					 extra.type);
 			err = -EINVAL;
 		} else {
-			memcpy(&extras[extra->type - 1], extra,
-			       sizeof(*extra));
+			extras[extra.type - 1] = extra;
 		}
 
 		skb = xennet_get_rx_skb(queue, cons);
 		ref = xennet_get_rx_ref(queue, cons);
 		xennet_move_rx_slot(queue, skb, ref);
-	} while (extra->flags & XEN_NETIF_EXTRA_FLAG_MORE);
+	} while (extra.flags & XEN_NETIF_EXTRA_FLAG_MORE);
 
 	queue->rx.rsp_cons = cons;
 	return err;
@@ -787,7 +785,7 @@ static int xennet_get_responses(struct n
 				struct netfront_rx_info *rinfo, RING_IDX rp,
 				struct sk_buff_head *list)
 {
-	struct xen_netif_rx_response *rx = &rinfo->rx;
+	struct xen_netif_rx_response *rx = &rinfo->rx, rx_local;
 	struct xen_netif_extra_info *extras = rinfo->extras;
 	struct device *dev = &queue->info->netdev->dev;
 	RING_IDX cons = queue->rx.rsp_cons;
@@ -845,7 +843,8 @@ next:
 			break;
 		}
 
-		rx = RING_GET_RESPONSE(&queue->rx, cons + slots);
+		RING_COPY_RESPONSE(&queue->rx, cons + slots, &rx_local);
+		rx = &rx_local;
 		skb = xennet_get_rx_skb(queue, cons + slots);
 		ref = xennet_get_rx_ref(queue, cons + slots);
 		slots++;
@@ -900,10 +899,11 @@ static int xennet_fill_frags(struct netf
 	struct sk_buff *nskb;
 
 	while ((nskb = __skb_dequeue(list))) {
-		struct xen_netif_rx_response *rx =
-			RING_GET_RESPONSE(&queue->rx, ++cons);
+		struct xen_netif_rx_response rx;
 		skb_frag_t *nfrag = &skb_shinfo(nskb)->frags[0];
 
+		RING_COPY_RESPONSE(&queue->rx, ++cons, &rx);
+
 		if (skb_shinfo(skb)->nr_frags == MAX_SKB_FRAGS) {
 			unsigned int pull_to = NETFRONT_SKB_CB(skb)->pull_to;
 
@@ -918,7 +918,7 @@ static int xennet_fill_frags(struct netf
 
 		skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
 				skb_frag_page(nfrag),
-				rx->offset, rx->status, PAGE_SIZE);
+				rx.offset, rx.status, PAGE_SIZE);
 
 		skb_shinfo(nskb)->nr_frags = 0;
 		kfree_skb(nskb);
@@ -1016,7 +1016,7 @@ static int xennet_poll(struct napi_struc
 	i = queue->rx.rsp_cons;
 	work_done = 0;
 	while ((i != rp) && (work_done < budget)) {
-		memcpy(rx, RING_GET_RESPONSE(&queue->rx, i), sizeof(*rx));
+		RING_COPY_RESPONSE(&queue->rx, i, rx);
 		memset(extras, 0, sizeof(rinfo.extras));
 
 		err = xennet_get_responses(queue, &rinfo, rp, &tmpq);
author maintainer
#69 lore raw

PATCH 69/69 tty: hvc: replace BUG_ON() with negative return value

In reply to Greg Kroah-Hartman

From: Juergen Gross <[email protected]>

commit e679004dec37566f658a255157d3aed9d762a2b7 upstream.

Xen frontends shouldn't BUG() in case of illegal data received from their backends. So replace the BUG_ON()s when reading illegal data from the ring page with negative return values.

---
 drivers/tty/hvc/hvc_xen.c |   17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)
drivers/tty/hvc/hvc_xen.c +14 -3
@@ -86,7 +86,11 @@ static int __write_console(struct xencon
 	cons = intf->out_cons;
 	prod = intf->out_prod;
 	mb();			/* update queue values before going on */
-	BUG_ON((prod - cons) > sizeof(intf->out));
+
+	if ((prod - cons) > sizeof(intf->out)) {
+		pr_err_once("xencons: Illegal ring page indices");
+		return -EINVAL;
+	}
 
 	while ((sent < len) && ((prod - cons) < sizeof(intf->out)))
 		intf->out[MASK_XENCONS_IDX(prod++, intf->out)] = data[sent++];
@@ -114,7 +118,10 @@ static int domU_write_console(uint32_t v
 	 */
 	while (len) {
 		int sent = __write_console(cons, data, len);
-		
+
+		if (sent < 0)
+			return sent;
+
 		data += sent;
 		len -= sent;
 
@@ -138,7 +145,11 @@ static int domU_read_console(uint32_t vt
 	cons = intf->in_cons;
 	prod = intf->in_prod;
 	mb();			/* get pointers before reading ring */
-	BUG_ON((prod - cons) > sizeof(intf->in));
+
+	if ((prod - cons) > sizeof(intf->in)) {
+		pr_err_once("xencons: Illegal ring page indices");
+		return -EINVAL;
+	}
 
 	while (cons != prod && recv < len)
 		buf[recv++] = intf->in[MASK_XENCONS_IDX(cons++, intf->in)];
author maintainer
#39 lore raw

PATCH 39/69 ARM: dts: BCM5301X: Add interrupt properties to GPIO node

In reply to Greg Kroah-Hartman

From: Florian Fainelli <[email protected]>

[ Upstream commit 40f7342f0587639e5ad625adaa15efdd3cffb18f ]

The GPIO controller is also an interrupt controller provider and is currently missing the appropriate 'interrupt-controller' and '#interrupt-cells' properties to denote that.

Fixes fb026d3de33b ("ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file")
---
 arch/arm/boot/dts/bcm5301x.dtsi | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/boot/dts/bcm5301x.dtsi +2 -0
index bb8b15e42fe93..6edc4bd1e7eaf 100644
@@ -239,6 +239,8 @@ chipcommon: chipcommon@0 {
 
 			gpio-controller;
 			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		pcie0: pcie@12000 {
Signature · 1 line
2.33.0
author maintainer
#40 lore raw

PATCH 40/69 ASoC: qdsp6: q6routing: Conditionally reset FrontEnd Mixer

In reply to Greg Kroah-Hartman

From: Srinivas Kandagatla <[email protected]>

[ Upstream commit 861afeac7990587588d057b2c0b3222331c3da29 ]

Stream IDs are reused across multiple BackEnd mixers, do not reset the stream mixers if they are not already set for that particular FrontEnd.

Ex:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1

would set the MultiMedia1 steam for SLIMBUS_0_RX, however doing below command will reset previously setup MultiMedia1 stream, because both of them are using MultiMedia1 PCM stream.

amixer cset iface=MIXER,name='SLIMBUS_2_RX Audio Mixer MultiMedia1' 0

reset the FrontEnd Mixers conditionally to fix this issue.

This is more noticeable in desktop setup, where in alsactl tries to restore the alsa state and overwriting the previous mixer settings.

Fixes e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver")
---
 sound/soc/qcom/qdsp6/q6routing.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
sound/soc/qcom/qdsp6/q6routing.c +5 -1
index 44eee18c658ae..7d2c5de380317 100644
@@ -443,7 +443,11 @@ static int msm_routing_put_audio_mixer(struct snd_kcontrol *kcontrol,
 		session->port_id = be_id;
 		snd_soc_dapm_mixer_update_power(dapm, kcontrol, 1, update);
 	} else {
-		session->port_id = -1;
+		if (session->port_id == be_id) {
+			session->port_id = -1;
+			return 0;
+		}
+
 		snd_soc_dapm_mixer_update_power(dapm, kcontrol, 0, update);
 	}
 
Signature · 1 line
2.33.0
author maintainer
#42 lore raw

PATCH 42/69 net: ieee802154: handle iftypes as u32

In reply to Greg Kroah-Hartman

From: Alexander Aring <[email protected]>

[ Upstream commit 451dc48c806a7ce9fbec5e7a24ccf4b2c936e834 ]

This patch fixes an issue that an u32 netlink value is handled as a signed enum value which doesn't fit into the range of u32 netlink type. If it's handled as -1 value some BIT() evaluation ends in a shift-out-of-bounds issue. To solve the issue we set the to u32 max which is s32 "-1" value to keep backwards compatibility and let the followed enum values start counting at 0. This brings the compiler to never handle the enum as signed and a check if the value is above NL802154_IFTYPE_MAX should filter -1 out.

Fixes f3ea5e44231a ("ieee802154: add new interface command")
---
 include/net/nl802154.h | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
include/net/nl802154.h +4 -3
index ddcee128f5d9a..145acb8f25095 100644
@@ -19,6 +19,8 @@
  *
  */
 
+#include <linux/types.h>
+
 #define NL802154_GENL_NAME "nl802154"
 
 enum nl802154_commands {
@@ -150,10 +152,9 @@ enum nl802154_attrs {
 };
 
 enum nl802154_iftype {
-	/* for backwards compatibility TODO */
-	NL802154_IFTYPE_UNSPEC = -1,
+	NL802154_IFTYPE_UNSPEC = (~(__u32)0),
 
-	NL802154_IFTYPE_NODE,
+	NL802154_IFTYPE_NODE = 0,
 	NL802154_IFTYPE_MONITOR,
 	NL802154_IFTYPE_COORD,
 
Signature · 1 line
2.33.0
author maintainer
#43 lore raw

PATCH 43/69 firmware: arm_scmi: pm: Propagate return value to caller

In reply to Greg Kroah-Hartman

From: Peng Fan <[email protected]>

[ Upstream commit 1446fc6c678e8d8b31606a4b877abe205f344b38 ]

of_genpd_add_provider_onecell may return error, so let's propagate its return value to caller

Fixes 898216c97ed2 ("firmware: arm_scmi: add device power domain support using genpd")
---
 drivers/firmware/arm_scmi/scmi_pm_domain.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/firmware/arm_scmi/scmi_pm_domain.c +1 -3
index 041f8152272bf..177874adccf0d 100644
@@ -106,9 +106,7 @@ static int scmi_pm_domain_probe(struct scmi_device *sdev)
 	scmi_pd_data->domains = domains;
 	scmi_pd_data->num_domains = num_domains;
 
-	of_genpd_add_provider_onecell(np, scmi_pd_data);
-
-	return 0;
+	return of_genpd_add_provider_onecell(np, scmi_pd_data);
 }
 
 static const struct scmi_device_id scmi_id_table[] = {
Signature · 1 line
2.33.0
author maintainer
#16 lore raw

PATCH 16/69 proc/vmcore: fix clearing user buffer by properly using clear_user()

In reply to Greg Kroah-Hartman

From: David Hildenbrand <[email protected]>

commit c1e63117711977cc4295b2ce73de29dd17066c82 upstream.

To clear a user buffer we cannot simply use memset, we have to use clear_user(). With a virtio-mem device that registers a vmcore_cb and has some logically unplugged memory inside an added Linux memory block, I can easily trigger a BUG by copying the vmcore via "cp":

systemd[1]: Starting Kdump Vmcore Save Service...
kdump[420]: Kdump is using the default log level(3).
kdump[453]: saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[465]: saving vmcore-dmesg.txt complete
kdump[467]: saving vmcore

  BUG: unable to handle page fault for address: 00007f2374e01000
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0003) - permissions violation
  PGD 7a523067 P4D 7a523067 PUD 7a528067 PMD 7a525067 PTE 800000007048f867
  Oops: 0003 [#1] PREEMPT SMP NOPTI
  CPU: 0 PID: 468 Comm: cp Not tainted 5.15.0+ #6
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-27-g64f37cc530f1-prebuilt.qemu.org 04/01/2014
  RIP: 0010:read_from_oldmem.part.0.cold+0x1d/0x86
  Code: ff ff ff e8 05 ff fe ff e9 b9 e9 7f ff 48 89 de 48 c7 c7 38 3b 60 82 e8 f1 fe fe ff 83 fd 08 72 3c 49 8d 7d 08 4c 89 e9 89 e8 <49> c7 45 00 00 00 00 00 49 c7 44 05 f8 00 00 00 00 48 83 e7 f81
  RSP: 0018:ffffc9000073be08 EFLAGS: 00010212
  RAX: 0000000000001000 RBX: 00000000002fd000 RCX: 00007f2374e01000
  RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00007f2374e01008
  RBP: 0000000000001000 R08: 0000000000000000 R09: ffffc9000073bc50
  R10: ffffc9000073bc48 R11: ffffffff829461a8 R12: 000000000000f000
  R13: 00007f2374e01000 R14: 0000000000000000 R15: ffff88807bd421e8
  FS:  00007f2374e12140(0000) GS:ffff88807f000000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f2374e01000 CR3: 000000007a4aa000 CR4: 0000000000350eb0
  Call Trace:
   read_vmcore+0x236/0x2c0
   proc_reg_read+0x55/0xa0
   vfs_read+0x95/0x190
   ksys_read+0x4f/0xc0
   do_syscall_64+0x3b/0x90
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Some x86-64 CPUs have a CPU feature called "Supervisor Mode Access Prevention (SMAP)", which is used to detect wrong access from the kernel to user buffers like this: SMAP triggers a permissions violation on wrong access. In the x86-64 variant of clear_user(), SMAP is properly handled via clac()+stac().

To fix, properly use clear_user() when we're dealing with a user buffer.

Fixes 997c136f518c ("fs/proc/vmcore.c: add hook to read_from_oldmem() to check for non-ram pages")
Cc Dave Young <[email protected]>
Cc Baoquan He <[email protected]>
Cc Vivek Goyal <[email protected]>
Cc Philipp Rudo <[email protected]>
---
 fs/proc/vmcore.c |   15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)
fs/proc/vmcore.c +10 -5
@@ -117,14 +117,19 @@ static ssize_t read_from_oldmem(char *bu
 			nr_bytes = count;
 
 		/* If pfn is not ram, return zeros for sparse dump files */
-		if (pfn_is_ram(pfn) == 0)
-			memset(buf, 0, nr_bytes);
-		else {
+		if (pfn_is_ram(pfn) == 0) {
+			tmp = 0;
+			if (!userbuf)
+				memset(buf, 0, nr_bytes);
+			else if (clear_user(buf, nr_bytes))
+				tmp = -EFAULT;
+		} else {
 			tmp = copy_oldmem_page(pfn, buf, nr_bytes,
 						offset, userbuf);
-			if (tmp < 0)
-				return tmp;
 		}
+		if (tmp < 0)
+			return tmp;
+
 		*ppos += nr_bytes;
 		count -= nr_bytes;
 		buf += nr_bytes;
author maintainer
#19 lore raw

PATCH 19/69 PCI: aardvark: Train link immediately after enabling training

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

commit 6964494582f56a3882c2c53b0edbfe99eb32b2e1 upstream.

Adding even 100ms (PCI_PM_D3COLD_WAIT) delay between enabling link training and starting link training causes detection issues with some buggy cards (such as Compex WLE900VX).

Move the code which enables link training immediately before the one which starts link traning.

This fixes detection issues of Compex WLE900VX card on Turris MOX after cold boot.

---
 drivers/pci/controller/pci-aardvark.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)
drivers/pci/controller/pci-aardvark.c +9 -6
@@ -280,11 +280,6 @@ static void advk_pcie_setup_hw(struct ad
 	reg |= LANE_COUNT_1;
 	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
 
-	/* Enable link training */
-	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
-	reg |= LINK_TRAINING_EN;
-	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
 	/* Enable MSI */
 	reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
 	reg |= PCIE_CORE_CTRL2_MSI_ENABLE;
@@ -326,7 +321,15 @@ static void advk_pcie_setup_hw(struct ad
 	 */
 	msleep(PCI_PM_D3COLD_WAIT);
 
-	/* Start link training */
+	/* Enable link training */
+	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+	reg |= LINK_TRAINING_EN;
+	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+	/*
+	 * Start link training immediately after enabling it.
+	 * This solves problems for some buggy cards.
+	 */
 	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
 	reg |= PCIE_CORE_LINK_TRAINING;
 	advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
author maintainer
#23 lore raw

PATCH 23/69 PCI: aardvark: Indicate error in val when config read fails

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

commit b1bd5714472cc72e14409f5659b154c765a76c65 upstream.

Most callers of config read do not check for return value. But most of the ones that do, checks for error indication in 'val' variable.

This patch updates error handling in advk_pcie_rd_conf() function. If PIO transfer fails then 'val' variable is set to 0xffffffff which indicates failture.

---
 drivers/pci/controller/pci-aardvark.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/pci/controller/pci-aardvark.c +3 -1
@@ -596,8 +596,10 @@ static int advk_pcie_rd_conf(struct pci_
 	advk_writel(pcie, 1, PIO_START);
 
 	ret = advk_pcie_wait_pio(pcie);
-	if (ret < 0)
+	if (ret < 0) {
+		*val = 0xffffffff;
 		return PCIBIOS_SET_FAILED;
+	}
 
 	/* Check PIO status and get the read result */
 	ret = advk_pcie_check_pio_status(pcie, val);
author maintainer
#18 lore raw

PATCH 18/69 PCI: aardvark: Wait for endpoint to be ready before training link

In reply to Greg Kroah-Hartman

From: Remi Pommarel <[email protected]>

commit f4c7d053d7f77cd5c1a1ba7c7ce085ddba13d1d7 upstream.

When configuring pcie reset pin from gpio (e.g. initially set by u-boot) to pcie function this pin goes low for a brief moment asserting the PERST# signal. Thus connected device enters fundamental reset process and link configuration can only begin after a minimal 100ms delay (see [1]).

Because the pin configuration comes from the "default" pinctrl it is implicitly configured before the probe callback is called:

driver_probe_device()
really_probe()

    ...
    pinctrl_bind_pins() /* Here pin goes from gpio to PCIE reset
                           function and PERST# is asserted */
    ...
    drv->probe()

[1] "PCI Express Base Specification", REV. 4.0
PCI Express, February 19 2014, 6.6.1 Conventional Reset

---
 drivers/pci/controller/pci-aardvark.c |    8 ++++++++
 1 file changed, 8 insertions(+)
drivers/pci/controller/pci-aardvark.c +8 -0
@@ -318,6 +318,14 @@ static void advk_pcie_setup_hw(struct ad
 	reg |= PIO_CTRL_ADDR_WIN_DISABLE;
 	advk_writel(pcie, reg, PIO_CTRL);
 
+	/*
+	 * PERST# signal could have been asserted by pinctrl subsystem before
+	 * probe() callback has been called, making the endpoint going into
+	 * fundamental reset. As required by PCI Express spec a delay for at
+	 * least 100ms after such a reset before link training is needed.
+	 */
+	msleep(PCI_PM_D3COLD_WAIT);
+
 	/* Start link training */
 	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
 	reg |= PCIE_CORE_LINK_TRAINING;
author maintainer
#21 lore raw

PATCH 21/69 PCI: aardvark: Issue PERST via GPIO

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

commit 5169a9851daaa2782a7bd2bb83d5b1bd224b2879 upstream.

Add support for issuing PERST via GPIO specified in 'reset-gpios' property (as described in PCI device tree bindings).

Some buggy cards (e.g. Compex WLE900VX or WLE1216) are not detected after reboot when PERST is not issued during driver initialization.

If bootloader already enabled link training then issuing PERST has no effect for some buggy cards (e.g. Compex WLE900VX) and these cards are not detected. We therefore clear the LINK_TRAINING_EN register before.

It was observed that Compex WLE900VX card needs to be in PERST reset for at least 10ms if bootloader enabled link training.

Tested on Turris MOX.

---
 drivers/pci/controller/pci-aardvark.c |   43 +++++++++++++++++++++++++++++++++-
 1 file changed, 42 insertions(+), 1 deletion(-)
drivers/pci/controller/pci-aardvark.c +42 -1
@@ -9,6 +9,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
@@ -17,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/of_address.h>
+#include <linux/of_gpio.h>
 #include <linux/of_pci.h>
 
 #include "../pci.h"
@@ -195,6 +197,7 @@ struct advk_pcie {
 	u16 msi_msg;
 	int root_bus_nr;
 	int link_gen;
+	struct gpio_desc *reset_gpio;
 };
 
 static inline void advk_writel(struct advk_pcie *pcie, u32 val, u64 reg)
@@ -310,10 +313,31 @@ err:
 	dev_err(dev, "link never came up\n");
 }
 
+static void advk_pcie_issue_perst(struct advk_pcie *pcie)
+{
+	u32 reg;
+
+	if (!pcie->reset_gpio)
+		return;
+
+	/* PERST does not work for some cards when link training is enabled */
+	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+	reg &= ~LINK_TRAINING_EN;
+	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+	/* 10ms delay is needed for some cards */
+	dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for 10ms\n");
+	gpiod_set_value_cansleep(pcie->reset_gpio, 1);
+	usleep_range(10000, 11000);
+	gpiod_set_value_cansleep(pcie->reset_gpio, 0);
+}
+
 static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 {
 	u32 reg;
 
+	advk_pcie_issue_perst(pcie);
+
 	/* Set to Direct mode */
 	reg = advk_readl(pcie, CTRL_CONFIG_REG);
 	reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
@@ -386,7 +410,8 @@ static void advk_pcie_setup_hw(struct ad
 
 	/*
 	 * PERST# signal could have been asserted by pinctrl subsystem before
-	 * probe() callback has been called, making the endpoint going into
+	 * probe() callback has been called or issued explicitly by reset gpio
+	 * function advk_pcie_issue_perst(), making the endpoint going into
 	 * fundamental reset. As required by PCI Express spec a delay for at
 	 * least 100ms after such a reset before link training is needed.
 	 */
@@ -1026,6 +1051,22 @@ static int advk_pcie_probe(struct platfo
 		return ret;
 	}
 
+	pcie->reset_gpio = devm_gpiod_get_from_of_node(dev, dev->of_node,
+						       "reset-gpios", 0,
+						       GPIOD_OUT_LOW,
+						       "pcie1-reset");
+	ret = PTR_ERR_OR_ZERO(pcie->reset_gpio);
+	if (ret) {
+		if (ret == -ENOENT) {
+			pcie->reset_gpio = NULL;
+		} else {
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "Failed to get reset-gpio: %i\n",
+					ret);
+			return ret;
+		}
+	}
+
 	ret = of_pci_get_max_link_speed(dev->of_node);
 	if (ret <= 0 || ret > 3)
 		pcie->link_gen = 3;
author maintainer
#20 lore raw

PATCH 20/69 PCI: aardvark: Improve link training

In reply to Greg Kroah-Hartman

From: Marek Behún <[email protected]>

commit 43fc679ced18006b12d918d7a8a4af392b7fbfe7 upstream.

Currently the aardvark driver trains link in PCIe gen2 mode. This may cause some buggy gen1 cards (such as Compex WLE900VX) to be unstable or even not detected. Moreover when ASPM code tries to retrain link second time, these cards may stop responding and link goes down. If gen1 is used this does not happen.

Unconditionally forcing gen1 is not a good solution since it may have performance impact on gen2 cards.

To overcome this, read 'max-link-speed' property (as defined in PCI device tree bindings) and use this as max gen mode. Then iteratively try link training at this mode or lower until successful. After successful link training choose final controller gen based on Negotiated Link Speed from Link Status register, which should match card speed.

---
 drivers/pci/controller/pci-aardvark.c |  114 ++++++++++++++++++++++++++--------
 1 file changed, 89 insertions(+), 25 deletions(-)
drivers/pci/controller/pci-aardvark.c +89 -25
@@ -35,6 +35,7 @@
 #define PCIE_CORE_LINK_CTRL_STAT_REG				0xd0
 #define     PCIE_CORE_LINK_L0S_ENTRY				BIT(0)
 #define     PCIE_CORE_LINK_TRAINING				BIT(5)
+#define     PCIE_CORE_LINK_SPEED_SHIFT				16
 #define     PCIE_CORE_LINK_WIDTH_SHIFT				20
 #define PCIE_CORE_ERR_CAPCTL_REG				0x118
 #define     PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX			BIT(5)
@@ -193,6 +194,7 @@ struct advk_pcie {
 	struct mutex msi_used_lock;
 	u16 msi_msg;
 	int root_bus_nr;
+	int link_gen;
 };
 
 static inline void advk_writel(struct advk_pcie *pcie, u32 val, u64 reg)
@@ -216,23 +218,98 @@ static int advk_pcie_link_up(struct advk
 
 static int advk_pcie_wait_for_link(struct advk_pcie *pcie)
 {
-	struct device *dev = &pcie->pdev->dev;
 	int retries;
 
 	/* check if the link is up or not */
 	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
-		if (advk_pcie_link_up(pcie)) {
-			dev_info(dev, "link up\n");
+		if (advk_pcie_link_up(pcie))
 			return 0;
-		}
 
 		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
 	}
 
-	dev_err(dev, "link never came up\n");
 	return -ETIMEDOUT;
 }
 
+static int advk_pcie_train_at_gen(struct advk_pcie *pcie, int gen)
+{
+	int ret, neg_gen;
+	u32 reg;
+
+	/* Setup link speed */
+	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+	reg &= ~PCIE_GEN_SEL_MSK;
+	if (gen == 3)
+		reg |= SPEED_GEN_3;
+	else if (gen == 2)
+		reg |= SPEED_GEN_2;
+	else
+		reg |= SPEED_GEN_1;
+	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+	/*
+	 * Enable link training. This is not needed in every call to this
+	 * function, just once suffices, but it does not break anything either.
+	 */
+	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+	reg |= LINK_TRAINING_EN;
+	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+	/*
+	 * Start link training immediately after enabling it.
+	 * This solves problems for some buggy cards.
+	 */
+	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
+	reg |= PCIE_CORE_LINK_TRAINING;
+	advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
+
+	ret = advk_pcie_wait_for_link(pcie);
+	if (ret)
+		return ret;
+
+	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
+	neg_gen = (reg >> PCIE_CORE_LINK_SPEED_SHIFT) & 0xf;
+
+	return neg_gen;
+}
+
+static void advk_pcie_train_link(struct advk_pcie *pcie)
+{
+	struct device *dev = &pcie->pdev->dev;
+	int neg_gen = -1, gen;
+
+	/*
+	 * Try link training at link gen specified by device tree property
+	 * 'max-link-speed'. If this fails, iteratively train at lower gen.
+	 */
+	for (gen = pcie->link_gen; gen > 0; --gen) {
+		neg_gen = advk_pcie_train_at_gen(pcie, gen);
+		if (neg_gen > 0)
+			break;
+	}
+
+	if (neg_gen < 0)
+		goto err;
+
+	/*
+	 * After successful training if negotiated gen is lower than requested,
+	 * train again on negotiated gen. This solves some stability issues for
+	 * some buggy gen1 cards.
+	 */
+	if (neg_gen < gen) {
+		gen = neg_gen;
+		neg_gen = advk_pcie_train_at_gen(pcie, gen);
+	}
+
+	if (neg_gen == gen) {
+		dev_info(dev, "link up at gen %i\n", gen);
+		return;
+	}
+
+err:
+	dev_err(dev, "link never came up\n");
+}
+
 static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 {
 	u32 reg;
@@ -268,12 +345,6 @@ static void advk_pcie_setup_hw(struct ad
 		PCIE_CORE_CTRL2_TD_ENABLE;
 	advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
 
-	/* Set GEN2 */
-	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
-	reg &= ~PCIE_GEN_SEL_MSK;
-	reg |= SPEED_GEN_2;
-	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
 	/* Set lane X1 */
 	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
 	reg &= ~LANE_CNT_MSK;
@@ -321,20 +392,7 @@ static void advk_pcie_setup_hw(struct ad
 	 */
 	msleep(PCI_PM_D3COLD_WAIT);
 
-	/* Enable link training */
-	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
-	reg |= LINK_TRAINING_EN;
-	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
-	/*
-	 * Start link training immediately after enabling it.
-	 * This solves problems for some buggy cards.
-	 */
-	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
-	reg |= PCIE_CORE_LINK_TRAINING;
-	advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
-
-	advk_pcie_wait_for_link(pcie);
+	advk_pcie_train_link(pcie);
 
 	reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
 	reg |= PCIE_CORE_CMD_MEM_ACCESS_EN |
@@ -968,6 +1026,12 @@ static int advk_pcie_probe(struct platfo
 		return ret;
 	}
 
+	ret = of_pci_get_max_link_speed(dev->of_node);
+	if (ret <= 0 || ret > 3)
+		pcie->link_gen = 3;
+	else
+		pcie->link_gen = ret;
+
 	advk_pcie_setup_hw(pcie);
 
 	ret = advk_pcie_init_irq_domain(pcie);
author maintainer
#26 lore raw

PATCH 26/69 PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link()

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

commit d0c6a3475b033960e85ae2bf176b14cab0a627d2 upstream.

Move code which belongs to link training (delays and resets) into advk_pcie_train_link() function, so everything related to link training, including timings is at one place.

After experiments it can be observed that link training in aardvark hardware is very sensitive to timings and delays, so it is a good idea to have this code at the same place as link training calls.

This patch does not change behavior of aardvark initialization.

---
 drivers/pci/controller/pci-aardvark.c |   64 ++++++++++++++++++----------------
 1 file changed, 34 insertions(+), 30 deletions(-)
drivers/pci/controller/pci-aardvark.c +34 -30
@@ -229,6 +229,25 @@ static int advk_pcie_wait_for_link(struc
 	return -ETIMEDOUT;
 }
 
+static void advk_pcie_issue_perst(struct advk_pcie *pcie)
+{
+	u32 reg;
+
+	if (!pcie->reset_gpio)
+		return;
+
+	/* PERST does not work for some cards when link training is enabled */
+	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+	reg &= ~LINK_TRAINING_EN;
+	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+	/* 10ms delay is needed for some cards */
+	dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for 10ms\n");
+	gpiod_set_value_cansleep(pcie->reset_gpio, 1);
+	usleep_range(10000, 11000);
+	gpiod_set_value_cansleep(pcie->reset_gpio, 0);
+}
+
 static int advk_pcie_train_at_gen(struct advk_pcie *pcie, int gen)
 {
 	int ret, neg_gen;
@@ -277,6 +296,21 @@ static void advk_pcie_train_link(struct
 	int neg_gen = -1, gen;
 
 	/*
+	 * Reset PCIe card via PERST# signal. Some cards are not detected
+	 * during link training when they are in some non-initial state.
+	 */
+	advk_pcie_issue_perst(pcie);
+
+	/*
+	 * PERST# signal could have been asserted by pinctrl subsystem before
+	 * probe() callback has been called or issued explicitly by reset gpio
+	 * function advk_pcie_issue_perst(), making the endpoint going into
+	 * fundamental reset. As required by PCI Express spec a delay for at
+	 * least 100ms after such a reset before link training is needed.
+	 */
+	msleep(PCI_PM_D3COLD_WAIT);
+
+	/*
 	 * Try link training at link gen specified by device tree property
 	 * 'max-link-speed'. If this fails, iteratively train at lower gen.
 	 */
@@ -308,31 +342,10 @@ err:
 	dev_err(dev, "link never came up\n");
 }
 
-static void advk_pcie_issue_perst(struct advk_pcie *pcie)
-{
-	u32 reg;
-
-	if (!pcie->reset_gpio)
-		return;
-
-	/* PERST does not work for some cards when link training is enabled */
-	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
-	reg &= ~LINK_TRAINING_EN;
-	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
-	/* 10ms delay is needed for some cards */
-	dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for 10ms\n");
-	gpiod_set_value_cansleep(pcie->reset_gpio, 1);
-	usleep_range(10000, 11000);
-	gpiod_set_value_cansleep(pcie->reset_gpio, 0);
-}
-
 static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 {
 	u32 reg;
 
-	advk_pcie_issue_perst(pcie);
-
 	/* Set to Direct mode */
 	reg = advk_readl(pcie, CTRL_CONFIG_REG);
 	reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
@@ -404,15 +417,6 @@ static void advk_pcie_setup_hw(struct ad
 	reg |= PIO_CTRL_ADDR_WIN_DISABLE;
 	advk_writel(pcie, reg, PIO_CTRL);
 
-	/*
-	 * PERST# signal could have been asserted by pinctrl subsystem before
-	 * probe() callback has been called or issued explicitly by reset gpio
-	 * function advk_pcie_issue_perst(), making the endpoint going into
-	 * fundamental reset. As required by PCI Express spec a delay for at
-	 * least 100ms after such a reset before link training is needed.
-	 */
-	msleep(PCI_PM_D3COLD_WAIT);
-
 	advk_pcie_train_link(pcie);
 
 	reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
author maintainer
#50 lore raw

PATCH 50/69 PM: hibernate: use correct mode for swsusp_close()

In reply to Greg Kroah-Hartman

From: Thomas Zeitlhofer <[email protected]>

[ Upstream commit cefcf24b4d351daf70ecd945324e200d3736821e ]

Commit 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in swsusp_check()") changed the opening mode of the block device to (FMODE_READ | FMODE_EXCL).

In the corresponding calls to swsusp_close(), the mode is still just FMODE_READ which triggers the warning in blkdev_flush_mapping() on resume from hibernate.

So, use the mode (FMODE_READ | FMODE_EXCL) also when closing the device.

Fixes 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in swsusp_check()")
---
 kernel/power/hibernate.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
kernel/power/hibernate.c +3 -3
index 28db51274ed0e..6670a44ec5d45 100644
@@ -677,7 +677,7 @@ static int load_image_and_restore(void)
 		goto Unlock;
 
 	error = swsusp_read(&flags);
-	swsusp_close(FMODE_READ);
+	swsusp_close(FMODE_READ | FMODE_EXCL);
 	if (!error)
 		hibernation_restore(flags & SF_PLATFORM_MODE);
 
@@ -874,7 +874,7 @@ static int software_resume(void)
 	/* The snapshot device should not be opened while we're running */
 	if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
 		error = -EBUSY;
-		swsusp_close(FMODE_READ);
+		swsusp_close(FMODE_READ | FMODE_EXCL);
 		goto Unlock;
 	}
 
@@ -910,7 +910,7 @@ static int software_resume(void)
 	pm_pr_dbg("Hibernation image not present or could not be loaded.\n");
 	return error;
  Close_Finish:
-	swsusp_close(FMODE_READ);
+	swsusp_close(FMODE_READ | FMODE_EXCL);
 	goto Finish;
 }
 
Signature · 1 line
2.33.0
author maintainer
#52 lore raw

PATCH 52/69 MIPS: use 3-level pgtable for 64KB page size on MIPS_VA_BITS_48

In reply to Greg Kroah-Hartman

From: Huang Pei <[email protected]>

[ Upstream commit 41ce097f714401e6ad8f3f5eb30d7f91b0b5e495 ]

It hangup when booting Loongson 3A1000 with BOTH CONFIG_PAGE_SIZE_64KB and CONFIG_MIPS_VA_BITS_48, that it turn out to use 2-level pgtable instead of 3-level. 64KB page size with 2-level pgtable only cover 42 bits VA, use 3-level pgtable to cover all 48 bits VA(55 bits)

Fixes 1e321fa917fb ("MIPS64: Support of at least 48 bits of SEGBITS)
---
 arch/mips/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/mips/Kconfig +1 -1
index e513528be3ad7..8a227a80f6bd5 100644
@@ -2991,7 +2991,7 @@ config HAVE_LATENCYTOP_SUPPORT
 config PGTABLE_LEVELS
 	int
 	default 4 if PAGE_SIZE_4KB && MIPS_VA_BITS_48
-	default 3 if 64BIT && !PAGE_SIZE_64KB
+	default 3 if 64BIT && (!PAGE_SIZE_64KB || MIPS_VA_BITS_48)
 	default 2
 
 config MIPS_AUTO_PFN_OFFSET
Signature · 1 line
2.33.0
author maintainer
#53 lore raw

PATCH 53/69 net/smc: Dont call clcsock shutdown twice when smc shutdown

In reply to Greg Kroah-Hartman

From: Tony Lu <[email protected]>

[ Upstream commit bacb6c1e47691cda4a95056c21b5487fb7199fcc ]

When applications call shutdown() with SHUT_RDWR in userspace, smc_close_active() calls kernel_sock_shutdown(), and it is called twice in smc_shutdown().

This fixes this by checking sk_state before do clcsock shutdown, and avoids missing the application's call of smc_shutdown().

---
 net/smc/af_smc.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
net/smc/af_smc.c +7 -1
index 9aab4ab8161bd..4c904ab29e0e6 100644
@@ -1589,8 +1589,10 @@ static __poll_t smc_poll(struct file *file, struct socket *sock,
 static int smc_shutdown(struct socket *sock, int how)
 {
 	struct sock *sk = sock->sk;
+	bool do_shutdown = true;
 	struct smc_sock *smc;
 	int rc = -EINVAL;
+	int old_state;
 	int rc1 = 0;
 
 	smc = smc_sk(sk);
@@ -1617,7 +1619,11 @@ static int smc_shutdown(struct socket *sock, int how)
 	}
 	switch (how) {
 	case SHUT_RDWR:		/* shutdown in both directions */
+		old_state = sk->sk_state;
 		rc = smc_close_active(smc);
+		if (old_state == SMC_ACTIVE &&
+		    sk->sk_state == SMC_PEERCLOSEWAIT1)
+			do_shutdown = false;
 		break;
 	case SHUT_WR:
 		rc = smc_close_shutdown_write(smc);
@@ -1627,7 +1633,7 @@ static int smc_shutdown(struct socket *sock, int how)
 		/* nothing more to do because peer is not involved */
 		break;
 	}
-	if (smc->clcsock)
+	if (do_shutdown && smc->clcsock)
 		rc1 = kernel_sock_shutdown(smc->clcsock, how);
 	/* map sock_shutdown_cmd constants to sk_shutdown value range */
 	sk->sk_shutdown |= how + 1;
Signature · 1 line
2.33.0
author maintainer
#49 lore raw

PATCH 49/69 net/smc: Ensure the active closing peer first closes clcsock

In reply to Greg Kroah-Hartman

From: Tony Lu <[email protected]>

[ Upstream commit 606a63c9783a32a45bd2ef0eee393711d75b3284 ]

The side that actively closed socket, it's clcsock doesn't enter TIME_WAIT state, but the passive side does it. It should show the same behavior as TCP sockets.

Consider this, when client actively closes the socket, the clcsock in server enters TIME_WAIT state, which means the address is occupied and won't be reused before TIME_WAIT dismissing. If we restarted server, the service would be unavailable for a long time.

To solve this issue, shutdown the clcsock in [A], perform the TCP active close progress first, before the passive closed side closing it. So that the actively closed side enters TIME_WAIT, not the passive one.

Client                                            |  Server
close() // client actively close                  |
  smc_release()                                   |
      smc_close_active() // PEERCLOSEWAIT1        |
          smc_close_final() // abort or closed = 1|
              smc_cdc_get_slot_and_msg_send()     |
          [A]                                     |
                                                  |smc_cdc_msg_recv_action() // ACTIVE
                                                  |  queue_work(smc_close_wq, &conn->close_work)
                                                  |    smc_close_passive_work() // PROCESSABORT or APPCLOSEWAIT1
                                                  |      smc_close_passive_abort_received() // only in abort
                                                  |
                                                  |close() // server recv zero, close
                                                  |  smc_release() // PROCESSABORT or APPCLOSEWAIT1
                                                  |    smc_close_active()
                                                  |      smc_close_abort() or smc_close_final() // CLOSED
                                                  |        smc_cdc_get_slot_and_msg_send() // abort or closed = 1
smc_cdc_msg_recv_action()                         |    smc_clcsock_release()
  queue_work(smc_close_wq, &conn->close_work)     |      sock_release(tcp) // actively close clc, enter TIME_WAIT
    smc_close_passive_work() // PEERCLOSEWAIT1    |    smc_conn_free()
      smc_close_passive_abort_received() // CLOSED|
      smc_conn_free()                             |
      smc_clcsock_release()                       |
        sock_release(tcp) // passive close clc    |
Fixes b38d732477e4 ("smc: socket closing and linkgroup cleanup")
---
 net/smc/smc_close.c | 6 ++++++
 1 file changed, 6 insertions(+)
net/smc/smc_close.c +6 -0
index ea2b87f294696..e25c023582f9e 100644
@@ -202,6 +202,12 @@ int smc_close_active(struct smc_sock *smc)
 			if (rc)
 				break;
 			sk->sk_state = SMC_PEERCLOSEWAIT1;
+
+			/* actively shutdown clcsock before peer close it,
+			 * prevent peer from entering TIME_WAIT state.
+			 */
+			if (smc->clcsock && smc->clcsock->sk)
+				rc = kernel_sock_shutdown(smc->clcsock, SHUT_RDWR);
 		} else {
 			/* peer event has changed the state */
 			goto again;
Signature · 1 line
2.33.0
author maintainer
#51 lore raw

PATCH 51/69 tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit 4e1fddc98d2585ddd4792b5e44433dcee7ece001 ]

While testing BIG TCP patch series, I was expecting that TCP_RR workloads with 80KB requests/answers would send one 80KB TSO packet, then being received as a single GRO packet.

It turns out this was not happening, and the root cause was that cubic Hystart ACK train was triggering after a few (2 or 3) rounds of RPC.

Hystart was wrongly setting CWND/SSTHRESH to 30, while my RPC needed a budget of ~20 segments.

Ideally these TCP_RR flows should not exit slow start.

Cubic Hystart should reset itself at each round, instead of assuming every TCP flow is a bulk one.

Note that even after this patch, Hystart can still trigger, depending on scheduling artifacts, but at a higher CWND/SSTHRESH threshold, keeping optimal TSO packet sizes.

Tested:

ip link set dev eth0 gro_ipv6_max_size 131072 gso_ipv6_max_size 131072
nstat -n; netperf -H ... -t TCP_RR -l 5 -- -r 80000,80000 -K cubic; nstat|egrep "Ip6InReceives|Hystart|Ip6OutRequests"

Before:

8605

Ip6InReceives                   87541              0.0
Ip6OutRequests                  129496             0.0
TcpExtTCPHystartTrainDetect     1                  0.0
TcpExtTCPHystartTrainCwnd       30                 0.0

After:

8760

Ip6InReceives                   88514              0.0
Ip6OutRequests                  87975              0.0
Fixes ae27e98a5152 ("[TCP] CUBIC v2.3")
Cc Stephen Hemminger <[email protected]>
Cc Yuchung Cheng <[email protected]>
Cc Soheil Hassas Yeganeh <[email protected]>
---
 net/ipv4/tcp_cubic.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
net/ipv4/tcp_cubic.c +3 -2
index 8b5ba0a5cd386..93530bd332470 100644
@@ -340,8 +340,6 @@ static void bictcp_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 		return;
 
 	if (tcp_in_slow_start(tp)) {
-		if (hystart && after(ack, ca->end_seq))
-			bictcp_hystart_reset(sk);
 		acked = tcp_slow_start(tp, acked);
 		if (!acked)
 			return;
@@ -383,6 +381,9 @@ static void hystart_update(struct sock *sk, u32 delay)
 	if (ca->found & hystart_detect)
 		return;
 
+	if (after(tp->snd_una, ca->end_seq))
+		bictcp_hystart_reset(sk);
+
 	if (hystart_detect & HYSTART_ACK_TRAIN) {
 		u32 now = bictcp_clock();
 
Signature · 1 line
2.33.0
author maintainer
#44 lore raw

PATCH 44/69 NFSv42: Dont fail clone() unless the OP_CLONE operation failed

In reply to Greg Kroah-Hartman

From: Trond Myklebust <[email protected]>

[ Upstream commit d3c45824ad65aebf765fcf51366d317a29538820 ]

The failure to retrieve post-op attributes has no bearing on whether or not the clone operation itself was successful. We must therefore ignore the return value of decode_getfattr() when looking at the success or failure of nfs4_xdr_dec_clone().

Fixes 36022770de6c ("nfs42: add CLONE xdr functions")
---
 fs/nfs/nfs42xdr.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
fs/nfs/nfs42xdr.c +1 -2
index ec9803088f6b8..eee011de3f58b 100644
@@ -707,8 +707,7 @@ static int nfs4_xdr_dec_clone(struct rpc_rqst *rqstp,
 	status = decode_clone(xdr);
 	if (status)
 		goto out;
-	status = decode_getfattr(xdr, res->dst_fattr, res->server);
-
+	decode_getfattr(xdr, res->dst_fattr, res->server);
 out:
 	res->rpc_status = status;
 	return status;
Signature · 1 line
2.33.0
author maintainer
#5 lore raw

PATCH 5/69 usb: hub: Fix locking issues with address0_mutex

In reply to Greg Kroah-Hartman

From: Mathias Nyman <[email protected]>

commit 6cca13de26eea6d32a98d96d916a048d16a12822 upstream.

Fix the circular lock dependency and unbalanced unlock of addess0_mutex introduced when fixing an address0_mutex enumeration retry race in commit ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race")

Make sure locking order between port_dev->status_lock and address0_mutex is correct, and that address0_mutex is not unlocked in hub_port_connect "done:" codepath which may be reached without locking address0_mutex

---
 drivers/usb/core/hub.c |   19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)
drivers/usb/core/hub.c +12 -7
@@ -4978,6 +4978,7 @@ static void hub_port_connect(struct usb_
 	struct usb_port *port_dev = hub->ports[port1 - 1];
 	struct usb_device *udev = port_dev->child;
 	static int unreliable_port = -1;
+	bool retry_locked;
 
 	/* Disconnect any existing devices under this port */
 	if (udev) {
@@ -5034,9 +5035,10 @@ static void hub_port_connect(struct usb_
 
 	status = 0;
 
-	mutex_lock(hcd->address0_mutex);
-
 	for (i = 0; i < SET_CONFIG_TRIES; i++) {
+		usb_lock_port(port_dev);
+		mutex_lock(hcd->address0_mutex);
+		retry_locked = true;
 
 		/* reallocate for each attempt, since references
 		 * to the previous one can escape in various ways
@@ -5045,6 +5047,8 @@ static void hub_port_connect(struct usb_
 		if (!udev) {
 			dev_err(&port_dev->dev,
 					"couldn't allocate usb_device\n");
+			mutex_unlock(hcd->address0_mutex);
+			usb_unlock_port(port_dev);
 			goto done;
 		}
 
@@ -5066,13 +5070,13 @@ static void hub_port_connect(struct usb_
 		}
 
 		/* reset (non-USB 3.0 devices) and get descriptor */
-		usb_lock_port(port_dev);
 		status = hub_port_init(hub, udev, port1, i);
-		usb_unlock_port(port_dev);
 		if (status < 0)
 			goto loop;
 
 		mutex_unlock(hcd->address0_mutex);
+		usb_unlock_port(port_dev);
+		retry_locked = false;
 
 		if (udev->quirks & USB_QUIRK_DELAY_INIT)
 			msleep(2000);
@@ -5162,11 +5166,14 @@ static void hub_port_connect(struct usb_
 
 loop_disable:
 		hub_port_disable(hub, port1, 1);
-		mutex_lock(hcd->address0_mutex);
 loop:
 		usb_ep0_reinit(udev);
 		release_devnum(udev);
 		hub_free_dev(udev);
+		if (retry_locked) {
+			mutex_unlock(hcd->address0_mutex);
+			usb_unlock_port(port_dev);
+		}
 		usb_put_dev(udev);
 		if ((status == -ENOTCONN) || (status == -ENOTSUPP))
 			break;
@@ -5189,8 +5196,6 @@ loop:
 	}
 
 done:
-	mutex_unlock(hcd->address0_mutex);
-
 	hub_port_disable(hub, port1, 1);
 	if (hcd->driver->relinquish_port && !hub->hdev->parent) {
 		if (status != -ENOTCONN && status != -ENODEV)
author maintainer
#9 lore raw

PATCH 9/69 HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts

In reply to Greg Kroah-Hartman

From: Jason Gerecke <[email protected]>

commit 7fb0413baa7f8a04caef0c504df9af7e0623d296 upstream.

The HID descriptor of many of Wacom's touch input devices include a "Confidence" usage that signals if a particular touch collection contains useful data. The driver does not look at this flag, however, which causes even invalid contacts to be reported to userspace. A lucky combination of kernel event filtering and device behavior (specifically: contact ID 0 == invalid, contact ID >0 == valid; and order all data so that all valid contacts are reported before any invalid contacts) spare most devices from any visibly-bad behavior.

The DTH-2452 is one example of an unlucky device that misbehaves. It uses ID 0 for both the first valid contact and all invalid contacts. Because we report both the valid and invalid contacts, the kernel reports that contact 0 first goes down (valid) and then goes up (invalid) in every report. This causes ~100 clicks per second simply by touching the screen.

This patch inroduces new confidence flag in our hid_data structure. The value is initially set to true at the start of a report and can be set to false if an invalid touch usage is seen.

---
 drivers/hid/wacom_wac.c |    8 +++++++-
 drivers/hid/wacom_wac.h |    1 +
 2 files changed, 8 insertions(+), 1 deletion(-)
drivers/hid/wacom_wac.c +7 -1
@@ -2538,6 +2538,9 @@ static void wacom_wac_finger_event(struc
 	struct wacom_features *features = &wacom->wacom_wac.features;
 
 	switch (equivalent_usage) {
+	case HID_DG_CONFIDENCE:
+		wacom_wac->hid_data.confidence = value;
+		break;
 	case HID_GD_X:
 		wacom_wac->hid_data.x = value;
 		break;
@@ -2568,7 +2571,8 @@ static void wacom_wac_finger_event(struc
 
 
 	if (usage->usage_index + 1 == field->report_count) {
-		if (equivalent_usage == wacom_wac->hid_data.last_slot_field)
+		if (equivalent_usage == wacom_wac->hid_data.last_slot_field &&
+		    wacom_wac->hid_data.confidence)
 			wacom_wac_finger_slot(wacom_wac, wacom_wac->touch_input);
 	}
 }
@@ -2581,6 +2585,8 @@ static void wacom_wac_finger_pre_report(
 	struct hid_data* hid_data = &wacom_wac->hid_data;
 	int i;
 
+	hid_data->confidence = true;
+
 	for (i = 0; i < report->maxfield; i++) {
 		struct hid_field *field = report->field[i];
 		int j;
drivers/hid/wacom_wac.h +1 -0
@@ -302,6 +302,7 @@ struct hid_data {
 	bool tipswitch;
 	bool barrelswitch;
 	bool barrelswitch2;
+	bool confidence;
 	int x;
 	int y;
 	int pressure;
author maintainer
#24 lore raw

PATCH 24/69 PCI: aardvark: Dont touch PCIe registers if no card connected

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

commit 70e380250c3621c55ff218cbaf2272830d9dbb1d upstream.

When there is no PCIe card connected and advk_pcie_rd_conf() or advk_pcie_wr_conf() is called for PCI bus which doesn't belong to emulated root bridge, the aardvark driver throws the following error message:

advk-pcie d0070000.pcie: config read/write timed out

Obviously accessing PCIe registers of disconnected card is not possible.

Extend check in advk_pcie_valid_device() function for validating availability of PCIe bus. If PCIe link is down, then the device is marked as Not Found and the driver does not try to access these registers.

This is just an optimization to prevent accessing PCIe registers when card is disconnected. Trying to access PCIe registers of disconnected card does not cause any crash, kernel just needs to wait for a timeout. So if card disappear immediately after checking for PCIe link (before accessing PCIe registers), it does not cause any problems.

---
 drivers/pci/controller/pci-aardvark.c |    7 +++++++
 1 file changed, 7 insertions(+)
drivers/pci/controller/pci-aardvark.c +7 -0
@@ -525,6 +525,13 @@ static bool advk_pcie_valid_device(struc
 	if ((bus->number == pcie->root_bus_nr) && PCI_SLOT(devfn) != 0)
 		return false;
 
+	/*
+	 * If the link goes down after we check for link-up, nothing bad
+	 * happens but the config access times out.
+	 */
+	if (bus->number != pcie->root_bus_nr && !advk_pcie_link_up(pcie))
+		return false;
+
 	return true;
 }
 
author maintainer
#47 lore raw

PATCH 47/69 drm/vc4: fix error code in vc4_create_object()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 96c5f82ef0a145d3e56e5b26f2bf6dcd2ffeae1c ]

The ->gem_create_object() functions are supposed to return NULL if there is an error. None of the callers expect error pointers so returing one will lead to an Oops. See drm_gem_vram_create(), for example.

---
 drivers/gpu/drm/vc4/vc4_bo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/vc4/vc4_bo.c +1 -1
index 8dcce7182bb7c..1e28ff9815997 100644
@@ -417,7 +417,7 @@ struct drm_gem_object *vc4_create_object(struct drm_device *dev, size_t size)
 
 	bo = kzalloc(sizeof(*bo), GFP_KERNEL);
 	if (!bo)
-		return ERR_PTR(-ENOMEM);
+		return NULL;
 
 	bo->madv = VC4_MADV_WILLNEED;
 	refcount_set(&bo->usecnt, 0);
Signature · 1 line
2.33.0
author maintainer
#29 lore raw

PATCH 29/69 PCI: aardvark: Fix PCIe Max Payload Size setting

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

commit a4e17d65dafdd3513042d8f00404c9b6068a825c upstream.

Change PCIe Max Payload Size setting in PCIe Device Control register to 512 bytes to align with PCIe Link Initialization sequence as defined in Marvell Armada 3700 Functional Specification. According to the specification, maximal Max Payload Size supported by this device is 512 bytes.

Without this kernel prints suspicious line:

    pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 16384, max 512)

With this change it changes to:

    pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 512, max 512)
---
 drivers/pci/controller/pci-aardvark.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/pci/controller/pci-aardvark.c +2 -1
@@ -452,8 +452,9 @@ static void advk_pcie_setup_hw(struct ad
 	reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
 	reg &= ~PCI_EXP_DEVCTL_RELAX_EN;
 	reg &= ~PCI_EXP_DEVCTL_NOSNOOP_EN;
+	reg &= ~PCI_EXP_DEVCTL_PAYLOAD;
 	reg &= ~PCI_EXP_DEVCTL_READRQ;
-	reg |= PCI_EXP_DEVCTL_PAYLOAD; /* Set max payload size */
+	reg |= PCI_EXP_DEVCTL_PAYLOAD_512B;
 	reg |= PCI_EXP_DEVCTL_READRQ_512B;
 	advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
 
author maintainer
#4 lore raw

PATCH 4/69 usb: hub: Fix usb enumeration issue due to address0 race

In reply to Greg Kroah-Hartman

From: Mathias Nyman <[email protected]>

commit 6ae6dc22d2d1ce6aa77a6da8a761e61aca216f8b upstream.

xHC hardware can only have one slot in default state with address 0 waiting for a unique address at a time, otherwise "undefined behavior may occur" according to xhci spec 5.4.3.4

The address0_mutex exists to prevent this across both xhci roothubs.

If hub_port_init() fails, it may unlock the mutex and exit with a xhci slot in default state. If the other xhci roothub calls hub_port_init() at this point we end up with two slots in default state.

Make sure the address0_mutex protects the slot default state across hub_port_init() retries, until slot is addressed or disabled.

Note, one known minor case is not fixed by this patch.
If device needs to be reset during resume, but fails all hub_port_init() retries in usb_reset_and_verify_device(), then it's possible the slot is still left in default state when address0_mutex is unlocked.

Fixes 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel")
---
 drivers/usb/core/hub.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)
drivers/usb/core/hub.c +11 -3
@@ -4575,8 +4575,6 @@ hub_port_init(struct usb_hub *hub, struc
 	if (oldspeed == USB_SPEED_LOW)
 		delay = HUB_LONG_RESET_TIME;
 
-	mutex_lock(hcd->address0_mutex);
-
 	/* Reset the device; full speed may morph to high speed */
 	/* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
 	retval = hub_port_reset(hub, port1, udev, delay, false);
@@ -4891,7 +4889,6 @@ fail:
 		hub_port_disable(hub, port1, 0);
 		update_devnum(udev, devnum);	/* for disconnect processing */
 	}
-	mutex_unlock(hcd->address0_mutex);
 	return retval;
 }
 
@@ -5036,6 +5033,9 @@ static void hub_port_connect(struct usb_
 		unit_load = 100;
 
 	status = 0;
+
+	mutex_lock(hcd->address0_mutex);
+
 	for (i = 0; i < SET_CONFIG_TRIES; i++) {
 
 		/* reallocate for each attempt, since references
@@ -5072,6 +5072,8 @@ static void hub_port_connect(struct usb_
 		if (status < 0)
 			goto loop;
 
+		mutex_unlock(hcd->address0_mutex);
+
 		if (udev->quirks & USB_QUIRK_DELAY_INIT)
 			msleep(2000);
 
@@ -5160,6 +5162,7 @@ static void hub_port_connect(struct usb_
 
 loop_disable:
 		hub_port_disable(hub, port1, 1);
+		mutex_lock(hcd->address0_mutex);
 loop:
 		usb_ep0_reinit(udev);
 		release_devnum(udev);
@@ -5186,6 +5189,8 @@ loop:
 	}
 
 done:
+	mutex_unlock(hcd->address0_mutex);
+
 	hub_port_disable(hub, port1, 1);
 	if (hcd->driver->relinquish_port && !hub->hdev->parent) {
 		if (status != -ENOTCONN && status != -ENODEV)
@@ -5722,6 +5727,8 @@ static int usb_reset_and_verify_device(s
 	bos = udev->bos;
 	udev->bos = NULL;
 
+	mutex_lock(hcd->address0_mutex);
+
 	for (i = 0; i < SET_CONFIG_TRIES; ++i) {
 
 		/* ep0 maxpacket size may change; let the HCD know about it.
@@ -5731,6 +5738,7 @@ static int usb_reset_and_verify_device(s
 		if (ret >= 0 || ret == -ENOTCONN || ret == -ENODEV)
 			break;
 	}
+	mutex_unlock(hcd->address0_mutex);
 
 	if (ret < 0)
 		goto re_enumerate;
author maintainer
#36 lore raw

PATCH 36/69 arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function

In reply to Greg Kroah-Hartman

From: Marek Behún <[email protected]>

commit 715878016984b2617f6c1f177c50039e12e7bd5b upstream.

We found out that we are unable to control the PERST# signal via the default pin dedicated to be PERST# pin (GPIO2[3] pin) on A3700 SOC when this pin is in EP_PCIE1_Resetn mode. There is a register in the PCIe register space called PERSTN_GPIO_EN (D0088004[3]), but changing the value of this register does not change the pin output when measuring with voltmeter.

We do not know if this is a bug in the SOC, or if it works only when PCIe controller is in a certain state.

Commit f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready before training link") says that when this pin changes pinctrl mode from EP_PCIE1_Resetn to GPIO, the PERST# signal is asserted for a brief moment.

So currently the situation is that on A3700 boards the PERST# signal is asserted in U-Boot (because the code in U-Boot issues reset via this pin via GPIO mode), and then in Linux by the obscure and undocumented mechanism described by the above mentioned commit.

We want to issue PERST# signal in a known way, therefore this patch changes the pcie_reset_pin function from "pcie" to "gpio" and adds the reset-gpios property to the PCIe node in device tree files of EspressoBin and Armada 3720 Dev Board (Turris Mox device tree already has this property and uDPU does not have a PCIe port).

---
 arch/arm64/boot/dts/marvell/armada-3720-db.dts          |    3 +++
 arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts |    3 +++
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi            |    2 +-
 3 files changed, 7 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/marvell/armada-3720-db.dts +3 -0
@@ -128,6 +128,9 @@
 
 /* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */
 &pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +3 -0
@@ -55,6 +55,9 @@
 
 /* J9 */
 &pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
arch/arm64/boot/dts/marvell/armada-37xx.dtsi +1 -1
@@ -256,7 +256,7 @@
 
 				pcie_reset_pins: pcie-reset-pins {
 					groups = "pcie1";
-					function = "pcie";
+					function = "gpio";
 				};
 
 				pcie_clkreq_pins: pcie-clkreq-pins {
author maintainer
#48 lore raw

PATCH 48/69 ipv6: fix typos in __ip6_finish_output()

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit 19d36c5f294879949c9d6f57cb61d39cc4c48553 ]

We deal with IPv6 packets, so we need to use IP6CB(skb)->flags and IP6SKB_REROUTED, instead of IPCB(skb)->flags and IPSKB_REROUTED

Found by code inspection, please double check that fixing this bug does not surface other bugs.

Fixes 09ee9dba9611 ("ipv6: Reinject IPv6 packets if IPsec policy matches after SNAT")
Cc Tobias Brunner <[email protected]>
Cc Steffen Klassert <[email protected]>
Cc David Ahern <[email protected]>
---
 net/ipv6/ip6_output.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/ipv6/ip6_output.c +1 -1
index fc36f3b0dceb3..251ec12517e93 100644
@@ -175,7 +175,7 @@ static int ip6_finish_output(struct net *net, struct sock *sk, struct sk_buff *s
 #if defined(CONFIG_NETFILTER) && defined(CONFIG_XFRM)
 	/* Policy lookup after SNAT yielded a new policy */
 	if (skb_dst(skb)->xfrm) {
-		IPCB(skb)->flags |= IPSKB_REROUTED;
+		IP6CB(skb)->flags |= IP6SKB_REROUTED;
 		return dst_output(net, sk, skb);
 	}
 #endif
Signature · 1 line
2.33.0
author maintainer
#68 lore raw

PATCH 68/69 xen/netfront: dont trust the backend response data blindly

In reply to Greg Kroah-Hartman

From: Juergen Gross <[email protected]>

commit a884daa61a7d91650987e855464526aef219590f upstream.

Today netfront will trust the backend to send only sane response data. In order to avoid privilege escalations or crashes in case of malicious backends verify the data to be within expected limits. Especially make sure that the response always references an outstanding request.

Note that only the tx queue needs special id handling, as for the rx queue the id is equal to the index in the ring page.

Introduce a new indicator for the device whether it is broken and let the device stop working when it is set. Set this indicator in case the backend sets any weird data.

---
 drivers/net/xen-netfront.c |   80 ++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 75 insertions(+), 5 deletions(-)
drivers/net/xen-netfront.c +75 -5
@@ -126,10 +126,12 @@ struct netfront_queue {
 	struct sk_buff *tx_skbs[NET_TX_RING_SIZE];
 	unsigned short tx_link[NET_TX_RING_SIZE];
 #define TX_LINK_NONE 0xffff
+#define TX_PENDING   0xfffe
 	grant_ref_t gref_tx_head;
 	grant_ref_t grant_tx_ref[NET_TX_RING_SIZE];
 	struct page *grant_tx_page[NET_TX_RING_SIZE];
 	unsigned tx_skb_freelist;
+	unsigned int tx_pend_queue;
 
 	spinlock_t   rx_lock ____cacheline_aligned_in_smp;
 	struct xen_netif_rx_front_ring rx;
@@ -155,6 +157,9 @@ struct netfront_info {
 	struct netfront_stats __percpu *rx_stats;
 	struct netfront_stats __percpu *tx_stats;
 
+	/* Is device behaving sane? */
+	bool broken;
+
 	atomic_t rx_gso_checksum_fixup;
 };
 
@@ -339,7 +344,7 @@ static int xennet_open(struct net_device
 	unsigned int i = 0;
 	struct netfront_queue *queue = NULL;
 
-	if (!np->queues)
+	if (!np->queues || np->broken)
 		return -ENODEV;
 
 	for (i = 0; i < num_queues; ++i) {
@@ -367,11 +372,17 @@ static void xennet_tx_buf_gc(struct netf
 	unsigned short id;
 	struct sk_buff *skb;
 	bool more_to_do;
+	const struct device *dev = &queue->info->netdev->dev;
 
 	BUG_ON(!netif_carrier_ok(queue->info->netdev));
 
 	do {
 		prod = queue->tx.sring->rsp_prod;
+		if (RING_RESPONSE_PROD_OVERFLOW(&queue->tx, prod)) {
+			dev_alert(dev, "Illegal number of responses %u\n",
+				  prod - queue->tx.rsp_cons);
+			goto err;
+		}
 		rmb(); /* Ensure we see responses up to 'rp'. */
 
 		for (cons = queue->tx.rsp_cons; cons != prod; cons++) {
@@ -381,14 +392,27 @@ static void xennet_tx_buf_gc(struct netf
 			if (txrsp.status == XEN_NETIF_RSP_NULL)
 				continue;
 
-			id  = txrsp.id;
+			id = txrsp.id;
+			if (id >= RING_SIZE(&queue->tx)) {
+				dev_alert(dev,
+					  "Response has incorrect id (%u)\n",
+					  id);
+				goto err;
+			}
+			if (queue->tx_link[id] != TX_PENDING) {
+				dev_alert(dev,
+					  "Response for inactive request\n");
+				goto err;
+			}
+
+			queue->tx_link[id] = TX_LINK_NONE;
 			skb = queue->tx_skbs[id];
 			queue->tx_skbs[id] = NULL;
 			if (unlikely(gnttab_query_foreign_access(
 				queue->grant_tx_ref[id]) != 0)) {
-				pr_alert("%s: warning -- grant still in use by backend domain\n",
-					 __func__);
-				BUG();
+				dev_alert(dev,
+					  "Grant still in use by backend domain\n");
+				goto err;
 			}
 			gnttab_end_foreign_access_ref(
 				queue->grant_tx_ref[id], GNTMAP_readonly);
@@ -406,6 +430,12 @@ static void xennet_tx_buf_gc(struct netf
 	} while (more_to_do);
 
 	xennet_maybe_wake_tx(queue);
+
+	return;
+
+ err:
+	queue->info->broken = true;
+	dev_alert(dev, "Disabled for further use\n");
 }
 
 struct xennet_gnttab_make_txreq {
@@ -449,6 +479,12 @@ static void xennet_tx_setup_grant(unsign
 
 	*tx = info->tx_local;
 
+	/*
+	 * Put the request in the pending queue, it will be set to be pending
+	 * when the producer index is about to be raised.
+	 */
+	add_id_to_list(&queue->tx_pend_queue, queue->tx_link, id);
+
 	info->tx = tx;
 	info->size += info->tx_local.size;
 }
@@ -542,6 +578,15 @@ static u16 xennet_select_queue(struct ne
 	return queue_idx;
 }
 
+static void xennet_mark_tx_pending(struct netfront_queue *queue)
+{
+	unsigned int i;
+
+	while ((i = get_id_from_list(&queue->tx_pend_queue, queue->tx_link)) !=
+		TX_LINK_NONE)
+		queue->tx_link[i] = TX_PENDING;
+}
+
 #define MAX_XEN_SKB_FRAGS (65536 / XEN_PAGE_SIZE + 1)
 
 static netdev_tx_t xennet_start_xmit(struct sk_buff *skb, struct net_device *dev)
@@ -565,6 +610,8 @@ static netdev_tx_t xennet_start_xmit(str
 	/* Drop the packet if no queues are set up */
 	if (num_queues < 1)
 		goto drop;
+	if (unlikely(np->broken))
+		goto drop;
 	/* Determine which queue to transmit this SKB on */
 	queue_index = skb_get_queue_mapping(skb);
 	queue = &np->queues[queue_index];
@@ -668,6 +715,8 @@ static netdev_tx_t xennet_start_xmit(str
 	/* First request has the packet length. */
 	first_tx->size = skb->len;
 
+	xennet_mark_tx_pending(queue);
+
 	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&queue->tx, notify);
 	if (notify)
 		notify_remote_via_irq(queue->tx_irq);
@@ -992,6 +1041,13 @@ static int xennet_poll(struct napi_struc
 	skb_queue_head_init(&tmpq);
 
 	rp = queue->rx.sring->rsp_prod;
+	if (RING_RESPONSE_PROD_OVERFLOW(&queue->rx, rp)) {
+		dev_alert(&dev->dev, "Illegal number of responses %u\n",
+			  rp - queue->rx.rsp_cons);
+		queue->info->broken = true;
+		spin_unlock(&queue->rx_lock);
+		return 0;
+	}
 	rmb(); /* Ensure we see queued responses up to 'rp'. */
 
 	i = queue->rx.rsp_cons;
@@ -1210,6 +1266,9 @@ static irqreturn_t xennet_tx_interrupt(i
 	struct netfront_queue *queue = dev_id;
 	unsigned long flags;
 
+	if (queue->info->broken)
+		return IRQ_HANDLED;
+
 	spin_lock_irqsave(&queue->tx_lock, flags);
 	xennet_tx_buf_gc(queue);
 	spin_unlock_irqrestore(&queue->tx_lock, flags);
@@ -1222,6 +1281,9 @@ static irqreturn_t xennet_rx_interrupt(i
 	struct netfront_queue *queue = dev_id;
 	struct net_device *dev = queue->info->netdev;
 
+	if (queue->info->broken)
+		return IRQ_HANDLED;
+
 	if (likely(netif_carrier_ok(dev) &&
 		   RING_HAS_UNCONSUMED_RESPONSES(&queue->rx)))
 		napi_schedule(&queue->napi);
@@ -1243,6 +1305,10 @@ static void xennet_poll_controller(struc
 	struct netfront_info *info = netdev_priv(dev);
 	unsigned int num_queues = dev->real_num_tx_queues;
 	unsigned int i;
+
+	if (info->broken)
+		return;
+
 	for (i = 0; i < num_queues; ++i)
 		xennet_interrupt(0, &info->queues[i]);
 }
@@ -1614,6 +1680,7 @@ static int xennet_init_queue(struct netf
 
 	/* Initialise tx_skb_freelist as a free chain containing every entry. */
 	queue->tx_skb_freelist = 0;
+	queue->tx_pend_queue = TX_LINK_NONE;
 	for (i = 0; i < NET_TX_RING_SIZE; i++) {
 		queue->tx_link[i] = i + 1;
 		queue->grant_tx_ref[i] = GRANT_INVALID_REF;
@@ -1824,6 +1891,9 @@ static int talk_to_netback(struct xenbus
 	if (info->queues)
 		xennet_destroy_queues(info);
 
+	/* For the case of a reconnect reset the "broken" indicator. */
+	info->broken = false;
+
 	err = xennet_create_queues(info, &num_queues);
 	if (err < 0) {
 		xenbus_dev_fatal(dev, err, "creating queues");
author maintainer
#67 lore raw

PATCH 67/69 xen/netfront: disentangle tx_skb_freelist

In reply to Greg Kroah-Hartman

From: Juergen Gross <[email protected]>

commit 21631d2d741a64a073e167c27769e73bc7844a2f upstream.

The tx_skb_freelist elements are in a single linked list with the request id used as link reference. The per element link field is in a union with the skb pointer of an in use request.

Move the link reference out of the union in order to enable a later reuse of it for requests which need a populated skb pointer.

Rename add_id_to_freelist() and get_id_from_freelist() to add_id_to_list() and get_id_from_list() in order to prepare using those for other lists as well. Define ~0 as value to indicate the end of a list and place that value into the link for a request not being on the list.

When freeing a skb zero the skb pointer in the request. Use a NULL value of the skb pointer instead of skb_entry_is_link() for deciding whether a request has a skb linked to it.

Remove skb_entry_set_link() and open code it instead as it is really trivial now.

---
 drivers/net/xen-netfront.c |   61 ++++++++++++++++++---------------------------
 1 file changed, 25 insertions(+), 36 deletions(-)
drivers/net/xen-netfront.c +25 -36
@@ -121,17 +121,11 @@ struct netfront_queue {
 
 	/*
 	 * {tx,rx}_skbs store outstanding skbuffs. Free tx_skb entries
-	 * are linked from tx_skb_freelist through skb_entry.link.
-	 *
-	 *  NB. Freelist index entries are always going to be less than
-	 *  PAGE_OFFSET, whereas pointers to skbs will always be equal or
-	 *  greater than PAGE_OFFSET: we use this property to distinguish
-	 *  them.
+	 * are linked from tx_skb_freelist through tx_link.
 	 */
-	union skb_entry {
-		struct sk_buff *skb;
-		unsigned long link;
-	} tx_skbs[NET_TX_RING_SIZE];
+	struct sk_buff *tx_skbs[NET_TX_RING_SIZE];
+	unsigned short tx_link[NET_TX_RING_SIZE];
+#define TX_LINK_NONE 0xffff
 	grant_ref_t gref_tx_head;
 	grant_ref_t grant_tx_ref[NET_TX_RING_SIZE];
 	struct page *grant_tx_page[NET_TX_RING_SIZE];
@@ -169,33 +163,25 @@ struct netfront_rx_info {
 	struct xen_netif_extra_info extras[XEN_NETIF_EXTRA_TYPE_MAX - 1];
 };
 
-static void skb_entry_set_link(union skb_entry *list, unsigned short id)
-{
-	list->link = id;
-}
-
-static int skb_entry_is_link(const union skb_entry *list)
-{
-	BUILD_BUG_ON(sizeof(list->skb) != sizeof(list->link));
-	return (unsigned long)list->skb < PAGE_OFFSET;
-}
-
 /*
  * Access macros for acquiring freeing slots in tx_skbs[].
  */
 
-static void add_id_to_freelist(unsigned *head, union skb_entry *list,
-			       unsigned short id)
+static void add_id_to_list(unsigned *head, unsigned short *list,
+			   unsigned short id)
 {
-	skb_entry_set_link(&list[id], *head);
+	list[id] = *head;
 	*head = id;
 }
 
-static unsigned short get_id_from_freelist(unsigned *head,
-					   union skb_entry *list)
+static unsigned short get_id_from_list(unsigned *head, unsigned short *list)
 {
 	unsigned int id = *head;
-	*head = list[id].link;
+
+	if (id != TX_LINK_NONE) {
+		*head = list[id];
+		list[id] = TX_LINK_NONE;
+	}
 	return id;
 }
 
@@ -396,7 +382,8 @@ static void xennet_tx_buf_gc(struct netf
 				continue;
 
 			id  = txrsp.id;
-			skb = queue->tx_skbs[id].skb;
+			skb = queue->tx_skbs[id];
+			queue->tx_skbs[id] = NULL;
 			if (unlikely(gnttab_query_foreign_access(
 				queue->grant_tx_ref[id]) != 0)) {
 				pr_alert("%s: warning -- grant still in use by backend domain\n",
@@ -409,7 +396,7 @@ static void xennet_tx_buf_gc(struct netf
 				&queue->gref_tx_head, queue->grant_tx_ref[id]);
 			queue->grant_tx_ref[id] = GRANT_INVALID_REF;
 			queue->grant_tx_page[id] = NULL;
-			add_id_to_freelist(&queue->tx_skb_freelist, queue->tx_skbs, id);
+			add_id_to_list(&queue->tx_skb_freelist, queue->tx_link, id);
 			dev_kfree_skb_irq(skb);
 		}
 
@@ -442,7 +429,7 @@ static void xennet_tx_setup_grant(unsign
 	struct netfront_queue *queue = info->queue;
 	struct sk_buff *skb = info->skb;
 
-	id = get_id_from_freelist(&queue->tx_skb_freelist, queue->tx_skbs);
+	id = get_id_from_list(&queue->tx_skb_freelist, queue->tx_link);
 	tx = RING_GET_REQUEST(&queue->tx, queue->tx.req_prod_pvt++);
 	ref = gnttab_claim_grant_reference(&queue->gref_tx_head);
 	WARN_ON_ONCE(IS_ERR_VALUE((unsigned long)(int)ref));
@@ -450,7 +437,7 @@ static void xennet_tx_setup_grant(unsign
 	gnttab_grant_foreign_access_ref(ref, queue->info->xbdev->otherend_id,
 					gfn, GNTMAP_readonly);
 
-	queue->tx_skbs[id].skb = skb;
+	queue->tx_skbs[id] = skb;
 	queue->grant_tx_page[id] = page;
 	queue->grant_tx_ref[id] = ref;
 
@@ -1132,17 +1119,18 @@ static void xennet_release_tx_bufs(struc
 
 	for (i = 0; i < NET_TX_RING_SIZE; i++) {
 		/* Skip over entries which are actually freelist references */
-		if (skb_entry_is_link(&queue->tx_skbs[i]))
+		if (!queue->tx_skbs[i])
 			continue;
 
-		skb = queue->tx_skbs[i].skb;
+		skb = queue->tx_skbs[i];
+		queue->tx_skbs[i] = NULL;
 		get_page(queue->grant_tx_page[i]);
 		gnttab_end_foreign_access(queue->grant_tx_ref[i],
 					  GNTMAP_readonly,
 					  (unsigned long)page_address(queue->grant_tx_page[i]));
 		queue->grant_tx_page[i] = NULL;
 		queue->grant_tx_ref[i] = GRANT_INVALID_REF;
-		add_id_to_freelist(&queue->tx_skb_freelist, queue->tx_skbs, i);
+		add_id_to_list(&queue->tx_skb_freelist, queue->tx_link, i);
 		dev_kfree_skb_irq(skb);
 	}
 }
@@ -1624,13 +1612,14 @@ static int xennet_init_queue(struct netf
 	snprintf(queue->name, sizeof(queue->name), "vif%s-q%u",
 		 devid, queue->id);
 
-	/* Initialise tx_skbs as a free chain containing every entry. */
+	/* Initialise tx_skb_freelist as a free chain containing every entry. */
 	queue->tx_skb_freelist = 0;
 	for (i = 0; i < NET_TX_RING_SIZE; i++) {
-		skb_entry_set_link(&queue->tx_skbs[i], i+1);
+		queue->tx_link[i] = i + 1;
 		queue->grant_tx_ref[i] = GRANT_INVALID_REF;
 		queue->grant_tx_page[i] = NULL;
 	}
+	queue->tx_link[NET_TX_RING_SIZE - 1] = TX_LINK_NONE;
 
 	/* Clear out rx_skbs */
 	for (i = 0; i < NET_RX_RING_SIZE; i++) {
author maintainer
#66 lore raw

PATCH 66/69 xen/netfront: dont read data from request on the ring page

In reply to Greg Kroah-Hartman

From: Juergen Gross <[email protected]>

commit 162081ec33c2686afa29d91bf8d302824aa846c7 upstream.

In order to avoid a malicious backend being able to influence the local processing of a request build the request locally first and then copy it to the ring page. Any reading from the request influencing the processing in the frontend needs to be done on the local instance.

---
 drivers/net/xen-netfront.c |   80 ++++++++++++++++++++-------------------------
 1 file changed, 37 insertions(+), 43 deletions(-)
drivers/net/xen-netfront.c +37 -43
@@ -425,7 +425,8 @@ struct xennet_gnttab_make_txreq {
 	struct netfront_queue *queue;
 	struct sk_buff *skb;
 	struct page *page;
-	struct xen_netif_tx_request *tx; /* Last request */
+	struct xen_netif_tx_request *tx;      /* Last request on ring page */
+	struct xen_netif_tx_request tx_local; /* Last request local copy*/
 	unsigned int size;
 };
 
@@ -453,30 +454,27 @@ static void xennet_tx_setup_grant(unsign
 	queue->grant_tx_page[id] = page;
 	queue->grant_tx_ref[id] = ref;
 
-	tx->id = id;
-	tx->gref = ref;
-	tx->offset = offset;
-	tx->size = len;
-	tx->flags = 0;
+	info->tx_local.id = id;
+	info->tx_local.gref = ref;
+	info->tx_local.offset = offset;
+	info->tx_local.size = len;
+	info->tx_local.flags = 0;
+
+	*tx = info->tx_local;
 
 	info->tx = tx;
-	info->size += tx->size;
+	info->size += info->tx_local.size;
 }
 
 static struct xen_netif_tx_request *xennet_make_first_txreq(
-	struct netfront_queue *queue, struct sk_buff *skb,
-	struct page *page, unsigned int offset, unsigned int len)
+	struct xennet_gnttab_make_txreq *info,
+	unsigned int offset, unsigned int len)
 {
-	struct xennet_gnttab_make_txreq info = {
-		.queue = queue,
-		.skb = skb,
-		.page = page,
-		.size = 0,
-	};
+	info->size = 0;
 
-	gnttab_for_one_grant(page, offset, len, xennet_tx_setup_grant, &info);
+	gnttab_for_one_grant(info->page, offset, len, xennet_tx_setup_grant, info);
 
-	return info.tx;
+	return info->tx;
 }
 
 static void xennet_make_one_txreq(unsigned long gfn, unsigned int offset,
@@ -489,35 +487,27 @@ static void xennet_make_one_txreq(unsign
 	xennet_tx_setup_grant(gfn, offset, len, data);
 }
 
-static struct xen_netif_tx_request *xennet_make_txreqs(
-	struct netfront_queue *queue, struct xen_netif_tx_request *tx,
-	struct sk_buff *skb, struct page *page,
+static void xennet_make_txreqs(
+	struct xennet_gnttab_make_txreq *info,
+	struct page *page,
 	unsigned int offset, unsigned int len)
 {
-	struct xennet_gnttab_make_txreq info = {
-		.queue = queue,
-		.skb = skb,
-		.tx = tx,
-	};
-
 	/* Skip unused frames from start of page */
 	page += offset >> PAGE_SHIFT;
 	offset &= ~PAGE_MASK;
 
 	while (len) {
-		info.page = page;
-		info.size = 0;
+		info->page = page;
+		info->size = 0;
 
 		gnttab_foreach_grant_in_range(page, offset, len,
 					      xennet_make_one_txreq,
-					      &info);
+					      info);
 
 		page++;
 		offset = 0;
-		len -= info.size;
+		len -= info->size;
 	}
-
-	return info.tx;
 }
 
 /*
@@ -571,7 +561,7 @@ static netdev_tx_t xennet_start_xmit(str
 {
 	struct netfront_info *np = netdev_priv(dev);
 	struct netfront_stats *tx_stats = this_cpu_ptr(np->tx_stats);
-	struct xen_netif_tx_request *tx, *first_tx;
+	struct xen_netif_tx_request *first_tx;
 	unsigned int i;
 	int notify;
 	int slots;
@@ -580,6 +570,7 @@ static netdev_tx_t xennet_start_xmit(str
 	unsigned int len;
 	unsigned long flags;
 	struct netfront_queue *queue = NULL;
+	struct xennet_gnttab_make_txreq info = { };
 	unsigned int num_queues = dev->real_num_tx_queues;
 	u16 queue_index;
 	struct sk_buff *nskb;
@@ -637,21 +628,24 @@ static netdev_tx_t xennet_start_xmit(str
 	}
 
 	/* First request for the linear area. */
-	first_tx = tx = xennet_make_first_txreq(queue, skb,
-						page, offset, len);
-	offset += tx->size;
+	info.queue = queue;
+	info.skb = skb;
+	info.page = page;
+	first_tx = xennet_make_first_txreq(&info, offset, len);
+	offset += info.tx_local.size;
 	if (offset == PAGE_SIZE) {
 		page++;
 		offset = 0;
 	}
-	len -= tx->size;
+	len -= info.tx_local.size;
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL)
 		/* local packet? */
-		tx->flags |= XEN_NETTXF_csum_blank | XEN_NETTXF_data_validated;
+		first_tx->flags |= XEN_NETTXF_csum_blank |
+				   XEN_NETTXF_data_validated;
 	else if (skb->ip_summed == CHECKSUM_UNNECESSARY)
 		/* remote but checksummed. */
-		tx->flags |= XEN_NETTXF_data_validated;
+		first_tx->flags |= XEN_NETTXF_data_validated;
 
 	/* Optional extra info after the first request. */
 	if (skb_shinfo(skb)->gso_size) {
@@ -660,7 +654,7 @@ static netdev_tx_t xennet_start_xmit(str
 		gso = (struct xen_netif_extra_info *)
 			RING_GET_REQUEST(&queue->tx, queue->tx.req_prod_pvt++);
 
-		tx->flags |= XEN_NETTXF_extra_info;
+		first_tx->flags |= XEN_NETTXF_extra_info;
 
 		gso->u.gso.size = skb_shinfo(skb)->gso_size;
 		gso->u.gso.type = (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) ?
@@ -674,13 +668,13 @@ static netdev_tx_t xennet_start_xmit(str
 	}
 
 	/* Requests for the rest of the linear area. */
-	tx = xennet_make_txreqs(queue, tx, skb, page, offset, len);
+	xennet_make_txreqs(&info, page, offset, len);
 
 	/* Requests for all the frags. */
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
-		tx = xennet_make_txreqs(queue, tx, skb,
-					skb_frag_page(frag), frag->page_offset,
+		xennet_make_txreqs(&info, skb_frag_page(frag),
+					frag->page_offset,
 					skb_frag_size(frag));
 	}
 
author maintainer
#64 lore raw

PATCH 64/69 xen/blkfront: dont trust the backend response data blindly

In reply to Greg Kroah-Hartman

From: Juergen Gross <[email protected]>

commit b94e4b147fd1992ad450e1fea1fdaa3738753373 upstream.

Today blkfront will trust the backend to send only sane response data. In order to avoid privilege escalations or crashes in case of malicious backends verify the data to be within expected limits. Especially make sure that the response always references an outstanding request.

Introduce a new state of the ring BLKIF_STATE_ERROR which will be switched to in case an inconsistency is being detected. Recovering from this state is possible only via removing and adding the virtual device again (e.g. via a suspend/resume cycle).

Make all warning messages issued due to valid error responses rate limited in order to avoid message floods being triggered by a malicious backend.

---
 drivers/block/xen-blkfront.c |   70 ++++++++++++++++++++++++++++++++-----------
 1 file changed, 53 insertions(+), 17 deletions(-)
drivers/block/xen-blkfront.c +53 -17
@@ -80,6 +80,7 @@ enum blkif_state {
 	BLKIF_STATE_DISCONNECTED,
 	BLKIF_STATE_CONNECTED,
 	BLKIF_STATE_SUSPENDED,
+	BLKIF_STATE_ERROR,
 };
 
 struct grant {
@@ -89,6 +90,7 @@ struct grant {
 };
 
 enum blk_req_status {
+	REQ_PROCESSING,
 	REQ_WAITING,
 	REQ_DONE,
 	REQ_ERROR,
@@ -533,7 +535,7 @@ static unsigned long blkif_ring_get_requ
 
 	id = get_id_from_freelist(rinfo);
 	rinfo->shadow[id].request = req;
-	rinfo->shadow[id].status = REQ_WAITING;
+	rinfo->shadow[id].status = REQ_PROCESSING;
 	rinfo->shadow[id].associated_id = NO_ASSOCIATED_ID;
 
 	rinfo->shadow[id].req.u.rw.id = id;
@@ -562,6 +564,7 @@ static int blkif_queue_discard_req(struc
 
 	/* Copy the request to the ring page. */
 	*final_ring_req = *ring_req;
+	rinfo->shadow[id].status = REQ_WAITING;
 
 	return 0;
 }
@@ -837,8 +840,11 @@ static int blkif_queue_rw_req(struct req
 
 	/* Copy request(s) to the ring page. */
 	*final_ring_req = *ring_req;
-	if (unlikely(require_extra_req))
+	rinfo->shadow[id].status = REQ_WAITING;
+	if (unlikely(require_extra_req)) {
 		*final_extra_ring_req = *extra_ring_req;
+		rinfo->shadow[extra_id].status = REQ_WAITING;
+	}
 
 	if (new_persistent_gnts)
 		gnttab_free_grant_references(setup.gref_head);
@@ -1412,8 +1418,8 @@ static enum blk_req_status blkif_rsp_to_
 static int blkif_get_final_status(enum blk_req_status s1,
 				  enum blk_req_status s2)
 {
-	BUG_ON(s1 == REQ_WAITING);
-	BUG_ON(s2 == REQ_WAITING);
+	BUG_ON(s1 < REQ_DONE);
+	BUG_ON(s2 < REQ_DONE);
 
 	if (s1 == REQ_ERROR || s2 == REQ_ERROR)
 		return BLKIF_RSP_ERROR;
@@ -1446,7 +1452,7 @@ static bool blkif_completion(unsigned lo
 		s->status = blkif_rsp_to_req_status(bret->status);
 
 		/* Wait the second response if not yet here. */
-		if (s2->status == REQ_WAITING)
+		if (s2->status < REQ_DONE)
 			return false;
 
 		bret->status = blkif_get_final_status(s->status,
@@ -1565,11 +1571,17 @@ static irqreturn_t blkif_interrupt(int i
 
 	spin_lock_irqsave(&rinfo->ring_lock, flags);
  again:
-	rp = rinfo->ring.sring->rsp_prod;
-	rmb(); /* Ensure we see queued responses up to 'rp'. */
+	rp = READ_ONCE(rinfo->ring.sring->rsp_prod);
+	virt_rmb(); /* Ensure we see queued responses up to 'rp'. */
+	if (RING_RESPONSE_PROD_OVERFLOW(&rinfo->ring, rp)) {
+		pr_alert("%s: illegal number of responses %u\n",
+			 info->gd->disk_name, rp - rinfo->ring.rsp_cons);
+		goto err;
+	}
 
 	for (i = rinfo->ring.rsp_cons; i != rp; i++) {
 		unsigned long id;
+		unsigned int op;
 
 		RING_COPY_RESPONSE(&rinfo->ring, i, &bret);
 		id = bret.id;
@@ -1580,14 +1592,28 @@ static irqreturn_t blkif_interrupt(int i
 		 * look in get_id_from_freelist.
 		 */
 		if (id >= BLK_RING_SIZE(info)) {
-			WARN(1, "%s: response to %s has incorrect id (%ld)\n",
-			     info->gd->disk_name, op_name(bret.operation), id);
-			/* We can't safely get the 'struct request' as
-			 * the id is busted. */
-			continue;
+			pr_alert("%s: response has incorrect id (%ld)\n",
+				 info->gd->disk_name, id);
+			goto err;
+		}
+		if (rinfo->shadow[id].status != REQ_WAITING) {
+			pr_alert("%s: response references no pending request\n",
+				 info->gd->disk_name);
+			goto err;
 		}
+
+		rinfo->shadow[id].status = REQ_PROCESSING;
 		req  = rinfo->shadow[id].request;
 
+		op = rinfo->shadow[id].req.operation;
+		if (op == BLKIF_OP_INDIRECT)
+			op = rinfo->shadow[id].req.u.indirect.indirect_op;
+		if (bret.operation != op) {
+			pr_alert("%s: response has wrong operation (%u instead of %u)\n",
+				 info->gd->disk_name, bret.operation, op);
+			goto err;
+		}
+
 		if (bret.operation != BLKIF_OP_DISCARD) {
 			/*
 			 * We may need to wait for an extra response if the
@@ -1612,7 +1638,8 @@ static irqreturn_t blkif_interrupt(int i
 		case BLKIF_OP_DISCARD:
 			if (unlikely(bret.status == BLKIF_RSP_EOPNOTSUPP)) {
 				struct request_queue *rq = info->rq;
-				printk(KERN_WARNING "blkfront: %s: %s op failed\n",
+
+				pr_warn_ratelimited("blkfront: %s: %s op failed\n",
 					   info->gd->disk_name, op_name(bret.operation));
 				blkif_req(req)->error = BLK_STS_NOTSUPP;
 				info->feature_discard = 0;
@@ -1624,13 +1651,13 @@ static irqreturn_t blkif_interrupt(int i
 		case BLKIF_OP_FLUSH_DISKCACHE:
 		case BLKIF_OP_WRITE_BARRIER:
 			if (unlikely(bret.status == BLKIF_RSP_EOPNOTSUPP)) {
-				printk(KERN_WARNING "blkfront: %s: %s op failed\n",
+				pr_warn_ratelimited("blkfront: %s: %s op failed\n",
 				       info->gd->disk_name, op_name(bret.operation));
 				blkif_req(req)->error = BLK_STS_NOTSUPP;
 			}
 			if (unlikely(bret.status == BLKIF_RSP_ERROR &&
 				     rinfo->shadow[id].req.u.rw.nr_segments == 0)) {
-				printk(KERN_WARNING "blkfront: %s: empty %s op failed\n",
+				pr_warn_ratelimited("blkfront: %s: empty %s op failed\n",
 				       info->gd->disk_name, op_name(bret.operation));
 				blkif_req(req)->error = BLK_STS_NOTSUPP;
 			}
@@ -1645,8 +1672,9 @@ static irqreturn_t blkif_interrupt(int i
 		case BLKIF_OP_READ:
 		case BLKIF_OP_WRITE:
 			if (unlikely(bret.status != BLKIF_RSP_OKAY))
-				dev_dbg(&info->xbdev->dev, "Bad return from blkdev data "
-					"request: %x\n", bret.status);
+				dev_dbg_ratelimited(&info->xbdev->dev,
+					"Bad return from blkdev data request: %#x\n",
+					bret.status);
 
 			break;
 		default:
@@ -1671,6 +1699,14 @@ static irqreturn_t blkif_interrupt(int i
 	spin_unlock_irqrestore(&rinfo->ring_lock, flags);
 
 	return IRQ_HANDLED;
+
+ err:
+	info->connected = BLKIF_STATE_ERROR;
+
+	spin_unlock_irqrestore(&rinfo->ring_lock, flags);
+
+	pr_alert("%s disabled for further use\n", info->gd->disk_name);
+	return IRQ_HANDLED;
 }
 
 
author maintainer
#34 lore raw

PATCH 34/69 pinctrl: armada-37xx: Correct PWM pins definitions

In reply to Greg Kroah-Hartman

From: "Marek Beh�n" <[email protected]>

commit baf8d6899b1e8906dc076ef26cc633e96a8bb0c3 upstream.

The PWM pins on North Bridge on Armada 37xx can be configured into PWM or GPIO functions. When in PWM function, each pin can also be configured to drive low on 0 and tri-state on 1 (LED mode).

The current definitions handle this by declaring two pin groups for each pin:
- group "pwmN" with functions "pwm" and "gpio"
- group "ledN_od" ("od" for open drain) with functions "led" and "gpio"

This is semantically incorrect. The correct definition for each pin should be one group with three functions: "pwm", "led" and "gpio".

Change the "pwmN" groups to support "led" function.

Remove "ledN_od" groups. This cannot break backwards compatibility with older device trees: no device tree uses it since there is no PWM driver for this SOC yet. Also "ledN_od" groups are not even documented.

---
 Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt |    8 ++--
 drivers/pinctrl/mvebu/pinctrl-armada-37xx.c                               |   17 ++++------
 2 files changed, 12 insertions(+), 13 deletions(-)
Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt +4 -4
@@ -43,19 +43,19 @@ group emmc_nb
 
 group pwm0
  - pin 11 (GPIO1-11)
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm1
  - pin 12
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm2
  - pin 13
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm3
  - pin 14
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pmic1
  - pin 7
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c +8 -9
@@ -166,10 +166,14 @@ static struct armada_37xx_pin_group arma
 	PIN_GRP_GPIO("jtag", 20, 5, BIT(0), "jtag"),
 	PIN_GRP_GPIO("sdio0", 8, 3, BIT(1), "sdio"),
 	PIN_GRP_GPIO("emmc_nb", 27, 9, BIT(2), "emmc"),
-	PIN_GRP_GPIO("pwm0", 11, 1, BIT(3), "pwm"),
-	PIN_GRP_GPIO("pwm1", 12, 1, BIT(4), "pwm"),
-	PIN_GRP_GPIO("pwm2", 13, 1, BIT(5), "pwm"),
-	PIN_GRP_GPIO("pwm3", 14, 1, BIT(6), "pwm"),
+	PIN_GRP_GPIO_3("pwm0", 11, 1, BIT(3) | BIT(20), 0, BIT(20), BIT(3),
+		       "pwm", "led"),
+	PIN_GRP_GPIO_3("pwm1", 12, 1, BIT(4) | BIT(21), 0, BIT(21), BIT(4),
+		       "pwm", "led"),
+	PIN_GRP_GPIO_3("pwm2", 13, 1, BIT(5) | BIT(22), 0, BIT(22), BIT(5),
+		       "pwm", "led"),
+	PIN_GRP_GPIO_3("pwm3", 14, 1, BIT(6) | BIT(23), 0, BIT(23), BIT(6),
+		       "pwm", "led"),
 	PIN_GRP_GPIO("pmic1", 7, 1, BIT(7), "pmic"),
 	PIN_GRP_GPIO("pmic0", 6, 1, BIT(8), "pmic"),
 	PIN_GRP_GPIO("i2c2", 2, 2, BIT(9), "i2c"),
@@ -183,11 +187,6 @@ static struct armada_37xx_pin_group arma
 	PIN_GRP_EXTRA("uart2", 9, 2, BIT(1) | BIT(13) | BIT(14) | BIT(19),
 		      BIT(1) | BIT(13) | BIT(14), BIT(1) | BIT(19),
 		      18, 2, "gpio", "uart"),
-	PIN_GRP_GPIO_2("led0_od", 11, 1, BIT(20), BIT(20), 0, "led"),
-	PIN_GRP_GPIO_2("led1_od", 12, 1, BIT(21), BIT(21), 0, "led"),
-	PIN_GRP_GPIO_2("led2_od", 13, 1, BIT(22), BIT(22), 0, "led"),
-	PIN_GRP_GPIO_2("led3_od", 14, 1, BIT(23), BIT(23), 0, "led"),
-
 };
 
 static struct armada_37xx_pin_group armada_37xx_sb_groups[] = {
author maintainer
#41 lore raw

PATCH 41/69 ASoC: topology: Add missing rwsem around snd_ctl_remove() calls

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

[ Upstream commit 7e567b5ae06315ef2d70666b149962e2bb4b97af ]

snd_ctl_remove() has to be called with card->controls_rwsem held (when called after the card instantiation). This patch add the missing rwsem calls around it.

Fixes 8a9782346dcc ("ASoC: topology: Add topology core")
---
 sound/soc/soc-topology.c | 3 +++
 1 file changed, 3 insertions(+)
sound/soc/soc-topology.c +3 -0
index 2c6598e07dde3..ccf6dd9411975 100644
@@ -2565,6 +2565,7 @@ EXPORT_SYMBOL_GPL(snd_soc_tplg_widget_remove_all);
 /* remove dynamic controls from the component driver */
 int snd_soc_tplg_component_remove(struct snd_soc_component *comp, u32 index)
 {
+	struct snd_card *card = comp->card->snd_card;
 	struct snd_soc_dobj *dobj, *next_dobj;
 	int pass = SOC_TPLG_PASS_END;
 
@@ -2572,6 +2573,7 @@ int snd_soc_tplg_component_remove(struct snd_soc_component *comp, u32 index)
 	while (pass >= SOC_TPLG_PASS_START) {
 
 		/* remove mixer controls */
+		down_write(&card->controls_rwsem);
 		list_for_each_entry_safe(dobj, next_dobj, &comp->dobj_list,
 			list) {
 
@@ -2605,6 +2607,7 @@ int snd_soc_tplg_component_remove(struct snd_soc_component *comp, u32 index)
 				break;
 			}
 		}
+		up_write(&card->controls_rwsem);
 		pass--;
 	}
 
Signature · 1 line
2.33.0
author maintainer
#38 lore raw

PATCH 38/69 ARM: dts: BCM5301X: Fix I2C controller interrupt

In reply to Greg Kroah-Hartman

From: Florian Fainelli <[email protected]>

[ Upstream commit 754c4050a00e802e122690112fc2c3a6abafa7e2 ]

The I2C interrupt controller line is off by 32 because the datasheet describes interrupt inputs into the GIC which are for Shared Peripheral Interrupts and are starting at offset 32. The ARM GIC binding expects the SPI interrupts to be numbered from 0 relative to the SPI base.

Fixes bb097e3e0045 ("ARM: dts: BCM5301X: Add I2C support to the DT")
---
 arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/bcm5301x.dtsi +1 -1
index fa3422c4caec1..bb8b15e42fe93 100644
@@ -384,7 +384,7 @@ usb3_dmp: syscon@18105000 {
 	i2c0: i2c@18009000 {
 		compatible = "brcm,iproc-i2c";
 		reg = <0x18009000 0x50>;
-		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clock-frequency = <100000>;
Signature · 1 line
2.33.0
author maintainer
#62 lore raw

PATCH 62/69 xen/blkfront: read response from backend only once

In reply to Greg Kroah-Hartman

From: Juergen Gross <[email protected]>

commit 71b66243f9898d0e54296b4e7035fb33cdcb0707 upstream.

In order to avoid problems in case the backend is modifying a response on the ring page while the frontend has already seen it, just read the response into a local buffer in one go and then operate on that buffer only.

---
 drivers/block/xen-blkfront.c |   35 ++++++++++++++++++-----------------
 1 file changed, 18 insertions(+), 17 deletions(-)
drivers/block/xen-blkfront.c +18 -17
@@ -1549,7 +1549,7 @@ static bool blkif_completion(unsigned lo
 static irqreturn_t blkif_interrupt(int irq, void *dev_id)
 {
 	struct request *req;
-	struct blkif_response *bret;
+	struct blkif_response bret;
 	RING_IDX i, rp;
 	unsigned long flags;
 	struct blkfront_ring_info *rinfo = (struct blkfront_ring_info *)dev_id;
@@ -1566,8 +1566,9 @@ static irqreturn_t blkif_interrupt(int i
 	for (i = rinfo->ring.rsp_cons; i != rp; i++) {
 		unsigned long id;
 
-		bret = RING_GET_RESPONSE(&rinfo->ring, i);
-		id   = bret->id;
+		RING_COPY_RESPONSE(&rinfo->ring, i, &bret);
+		id = bret.id;
+
 		/*
 		 * The backend has messed up and given us an id that we would
 		 * never have given to it (we stamp it up to BLK_RING_SIZE -
@@ -1575,39 +1576,39 @@ static irqreturn_t blkif_interrupt(int i
 		 */
 		if (id >= BLK_RING_SIZE(info)) {
 			WARN(1, "%s: response to %s has incorrect id (%ld)\n",
-			     info->gd->disk_name, op_name(bret->operation), id);
+			     info->gd->disk_name, op_name(bret.operation), id);
 			/* We can't safely get the 'struct request' as
 			 * the id is busted. */
 			continue;
 		}
 		req  = rinfo->shadow[id].request;
 
-		if (bret->operation != BLKIF_OP_DISCARD) {
+		if (bret.operation != BLKIF_OP_DISCARD) {
 			/*
 			 * We may need to wait for an extra response if the
 			 * I/O request is split in 2
 			 */
-			if (!blkif_completion(&id, rinfo, bret))
+			if (!blkif_completion(&id, rinfo, &bret))
 				continue;
 		}
 
 		if (add_id_to_freelist(rinfo, id)) {
 			WARN(1, "%s: response to %s (id %ld) couldn't be recycled!\n",
-			     info->gd->disk_name, op_name(bret->operation), id);
+			     info->gd->disk_name, op_name(bret.operation), id);
 			continue;
 		}
 
-		if (bret->status == BLKIF_RSP_OKAY)
+		if (bret.status == BLKIF_RSP_OKAY)
 			blkif_req(req)->error = BLK_STS_OK;
 		else
 			blkif_req(req)->error = BLK_STS_IOERR;
 
-		switch (bret->operation) {
+		switch (bret.operation) {
 		case BLKIF_OP_DISCARD:
-			if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
+			if (unlikely(bret.status == BLKIF_RSP_EOPNOTSUPP)) {
 				struct request_queue *rq = info->rq;
 				printk(KERN_WARNING "blkfront: %s: %s op failed\n",
-					   info->gd->disk_name, op_name(bret->operation));
+					   info->gd->disk_name, op_name(bret.operation));
 				blkif_req(req)->error = BLK_STS_NOTSUPP;
 				info->feature_discard = 0;
 				info->feature_secdiscard = 0;
@@ -1617,15 +1618,15 @@ static irqreturn_t blkif_interrupt(int i
 			break;
 		case BLKIF_OP_FLUSH_DISKCACHE:
 		case BLKIF_OP_WRITE_BARRIER:
-			if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
+			if (unlikely(bret.status == BLKIF_RSP_EOPNOTSUPP)) {
 				printk(KERN_WARNING "blkfront: %s: %s op failed\n",
-				       info->gd->disk_name, op_name(bret->operation));
+				       info->gd->disk_name, op_name(bret.operation));
 				blkif_req(req)->error = BLK_STS_NOTSUPP;
 			}
-			if (unlikely(bret->status == BLKIF_RSP_ERROR &&
+			if (unlikely(bret.status == BLKIF_RSP_ERROR &&
 				     rinfo->shadow[id].req.u.rw.nr_segments == 0)) {
 				printk(KERN_WARNING "blkfront: %s: empty %s op failed\n",
-				       info->gd->disk_name, op_name(bret->operation));
+				       info->gd->disk_name, op_name(bret.operation));
 				blkif_req(req)->error = BLK_STS_NOTSUPP;
 			}
 			if (unlikely(blkif_req(req)->error)) {
@@ -1638,9 +1639,9 @@ static irqreturn_t blkif_interrupt(int i
 			/* fall through */
 		case BLKIF_OP_READ:
 		case BLKIF_OP_WRITE:
-			if (unlikely(bret->status != BLKIF_RSP_OKAY))
+			if (unlikely(bret.status != BLKIF_RSP_OKAY))
 				dev_dbg(&info->xbdev->dev, "Bad return from blkdev data "
-					"request: %x\n", bret->status);
+					"request: %x\n", bret.status);
 
 			break;
 		default:
author maintainer
#63 lore raw

PATCH 63/69 xen/blkfront: dont take local copy of a request from the ring page

In reply to Greg Kroah-Hartman

From: Juergen Gross <[email protected]>

commit 8f5a695d99000fc3aa73934d7ced33cfc64dcdab upstream.

In order to avoid a malicious backend being able to influence the local copy of a request build the request locally first and then copy it to the ring page instead of doing it the other way round as today.

---
 drivers/block/xen-blkfront.c |   25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)
drivers/block/xen-blkfront.c +15 -10
@@ -536,7 +536,7 @@ static unsigned long blkif_ring_get_requ
 	rinfo->shadow[id].status = REQ_WAITING;
 	rinfo->shadow[id].associated_id = NO_ASSOCIATED_ID;
 
-	(*ring_req)->u.rw.id = id;
+	rinfo->shadow[id].req.u.rw.id = id;
 
 	return id;
 }
@@ -544,11 +544,12 @@ static unsigned long blkif_ring_get_requ
 static int blkif_queue_discard_req(struct request *req, struct blkfront_ring_info *rinfo)
 {
 	struct blkfront_info *info = rinfo->dev_info;
-	struct blkif_request *ring_req;
+	struct blkif_request *ring_req, *final_ring_req;
 	unsigned long id;
 
 	/* Fill out a communications ring structure. */
-	id = blkif_ring_get_request(rinfo, req, &ring_req);
+	id = blkif_ring_get_request(rinfo, req, &final_ring_req);
+	ring_req = &rinfo->shadow[id].req;
 
 	ring_req->operation = BLKIF_OP_DISCARD;
 	ring_req->u.discard.nr_sectors = blk_rq_sectors(req);
@@ -559,8 +560,8 @@ static int blkif_queue_discard_req(struc
 	else
 		ring_req->u.discard.flag = 0;
 
-	/* Keep a private copy so we can reissue requests when recovering. */
-	rinfo->shadow[id].req = *ring_req;
+	/* Copy the request to the ring page. */
+	*final_ring_req = *ring_req;
 
 	return 0;
 }
@@ -693,6 +694,7 @@ static int blkif_queue_rw_req(struct req
 {
 	struct blkfront_info *info = rinfo->dev_info;
 	struct blkif_request *ring_req, *extra_ring_req = NULL;
+	struct blkif_request *final_ring_req, *final_extra_ring_req = NULL;
 	unsigned long id, extra_id = NO_ASSOCIATED_ID;
 	bool require_extra_req = false;
 	int i;
@@ -737,7 +739,8 @@ static int blkif_queue_rw_req(struct req
 	}
 
 	/* Fill out a communications ring structure. */
-	id = blkif_ring_get_request(rinfo, req, &ring_req);
+	id = blkif_ring_get_request(rinfo, req, &final_ring_req);
+	ring_req = &rinfo->shadow[id].req;
 
 	num_sg = blk_rq_map_sg(req->q, req, rinfo->shadow[id].sg);
 	num_grant = 0;
@@ -788,7 +791,9 @@ static int blkif_queue_rw_req(struct req
 		ring_req->u.rw.nr_segments = num_grant;
 		if (unlikely(require_extra_req)) {
 			extra_id = blkif_ring_get_request(rinfo, req,
-							  &extra_ring_req);
+							  &final_extra_ring_req);
+			extra_ring_req = &rinfo->shadow[extra_id].req;
+
 			/*
 			 * Only the first request contains the scatter-gather
 			 * list.
@@ -830,10 +835,10 @@ static int blkif_queue_rw_req(struct req
 	if (setup.segments)
 		kunmap_atomic(setup.segments);
 
-	/* Keep a private copy so we can reissue requests when recovering. */
-	rinfo->shadow[id].req = *ring_req;
+	/* Copy request(s) to the ring page. */
+	*final_ring_req = *ring_req;
 	if (unlikely(require_extra_req))
-		rinfo->shadow[extra_id].req = *extra_ring_req;
+		*final_extra_ring_req = *extra_ring_req;
 
 	if (new_persistent_gnts)
 		gnttab_free_grant_references(setup.gref_head);
author maintainer
#60 lore raw

PATCH 60/69 fuse: release pipe buf after last use

In reply to Greg Kroah-Hartman

From: Miklos Szeredi <[email protected]>

commit 473441720c8616dfaf4451f9c7ea14f0eb5e5d65 upstream.

Checking buf->flags should be done before the pipe_buf_release() is called on the pipe buffer, since releasing the buffer might modify the flags.

This is exactly what page_cache_pipe_buf_release() does, and which results in the same VM_BUG_ON_PAGE(PageLRU(page)) that the original patch was trying to fix.

Fixes 712a951025c0 ("fuse: fix page stealing")
Cc <[email protected]> # v2.6.35
---
 fs/fuse/dev.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
fs/fuse/dev.c +5 -5
@@ -905,17 +905,17 @@ static int fuse_try_move_page(struct fus
 		goto out_put_old;
 	}
 
+	get_page(newpage);
+
+	if (!(buf->flags & PIPE_BUF_FLAG_LRU))
+		lru_cache_add_file(newpage);
+
 	/*
 	 * Release while we have extra ref on stolen page.  Otherwise
 	 * anon_pipe_buf_release() might think the page can be reused.
 	 */
 	pipe_buf_release(cs->pipe, buf);
 
-	get_page(newpage);
-
-	if (!(buf->flags & PIPE_BUF_FLAG_LRU))
-		lru_cache_add_file(newpage);
-
 	err = 0;
 	spin_lock(&cs->req->waitq.lock);
 	if (test_bit(FR_ABORTED, &cs->req->flags))
author maintainer
#58 lore raw

PATCH 58/69 hugetlbfs: flush TLBs correctly after huge_pmd_unshare

In reply to Greg Kroah-Hartman

From: Nadav Amit <[email protected]>

commit a4a118f2eead1d6c49e00765de89878288d4b890 upstream.

When __unmap_hugepage_range() calls to huge_pmd_unshare() succeed, a TLB flush is missing. This TLB flush must be performed before releasing the i_mmap_rwsem, in order to prevent an unshared PMDs page from being released and reused before the TLB flush took place.

Arguably, a comprehensive solution would use mmu_gather interface to batch the TLB flushes and the PMDs page release, however it is not an easy solution: (1) try_to_unmap_one() and try_to_migrate_one() also call huge_pmd_unshare() and they cannot use the mmu_gather interface; and (2) deferring the release of the page reference for the PMDs page until after i_mmap_rwsem is dropeed can confuse huge_pmd_unshare() into thinking PMDs are shared when they are not.

Fix __unmap_hugepage_range() by adding the missing TLB flush, and forcing a flush when unshare is successful.

Fixes 24669e58477e ("hugetlb: use mmu_gather instead of a temporary linked list for accumulating pages)" # 3.6
Cc Aneesh Kumar K.V <[email protected]>
Cc KAMEZAWA Hiroyuki <[email protected]>
Cc Andrew Morton <[email protected]>
---
 arch/arm/include/asm/tlb.h  |    8 ++++++++
 arch/ia64/include/asm/tlb.h |   10 ++++++++++
 arch/s390/include/asm/tlb.h |   16 ++++++++++++++++
 arch/sh/include/asm/tlb.h   |   10 ++++++++++
 arch/um/include/asm/tlb.h   |   12 ++++++++++++
 include/asm-generic/tlb.h   |    2 ++
 mm/hugetlb.c                |   23 +++++++++++++++++++----
 mm/memory.c                 |   10 ++++++++++
 8 files changed, 87 insertions(+), 4 deletions(-)
arch/arm/include/asm/tlb.h +8 -0
@@ -280,6 +280,14 @@ tlb_remove_pmd_tlb_entry(struct mmu_gath
 	tlb_add_flush(tlb, addr);
 }
 
+static inline void
+tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address,
+		    unsigned long size)
+{
+	tlb_add_flush(tlb, address);
+	tlb_add_flush(tlb, address + size - PMD_SIZE);
+}
+
 #define pte_free_tlb(tlb, ptep, addr)	__pte_free_tlb(tlb, ptep, addr)
 #define pmd_free_tlb(tlb, pmdp, addr)	__pmd_free_tlb(tlb, pmdp, addr)
 #define pud_free_tlb(tlb, pudp, addr)	pud_free((tlb)->mm, pudp)
arch/ia64/include/asm/tlb.h +10 -0
@@ -268,6 +268,16 @@ __tlb_remove_tlb_entry (struct mmu_gathe
 	tlb->end_addr = address + PAGE_SIZE;
 }
 
+static inline void
+tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address,
+		    unsigned long size)
+{
+	if (tlb->start_addr > address)
+		tlb->start_addr = address;
+	if (tlb->end_addr < address + size)
+		tlb->end_addr = address + size;
+}
+
 #define tlb_migrate_finish(mm)	platform_tlb_migrate_finish(mm)
 
 #define tlb_start_vma(tlb, vma)			do { } while (0)
arch/s390/include/asm/tlb.h +16 -0
@@ -116,6 +116,20 @@ static inline void tlb_remove_page_size(
 	return tlb_remove_page(tlb, page);
 }
 
+static inline void tlb_flush_pmd_range(struct mmu_gather *tlb,
+				unsigned long address, unsigned long size)
+{
+	/*
+	 * the range might exceed the original range that was provided to
+	 * tlb_gather_mmu(), so we need to update it despite the fact it is
+	 * usually not updated.
+	 */
+	if (tlb->start > address)
+		tlb->start = address;
+	if (tlb->end < address + size)
+		tlb->end = address + size;
+}
+
 /*
  * pte_free_tlb frees a pte table and clears the CRSTE for the
  * page table from the tlb.
@@ -177,6 +191,8 @@ static inline void pud_free_tlb(struct m
 #define tlb_remove_tlb_entry(tlb, ptep, addr)	do { } while (0)
 #define tlb_remove_pmd_tlb_entry(tlb, pmdp, addr)	do { } while (0)
 #define tlb_migrate_finish(mm)			do { } while (0)
+#define tlb_flush_pmd_range(tlb, addr, sz)	do { } while (0)
+
 #define tlb_remove_huge_tlb_entry(h, tlb, ptep, address)	\
 	tlb_remove_tlb_entry(tlb, ptep, address)
 
arch/sh/include/asm/tlb.h +10 -0
@@ -127,6 +127,16 @@ static inline void tlb_remove_page_size(
 	return tlb_remove_page(tlb, page);
 }
 
+static inline void
+tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address,
+		    unsigned long size)
+{
+	if (tlb->start > address)
+		tlb->start = address;
+	if (tlb->end < address + size)
+		tlb->end = address + size;
+}
+
 #define tlb_remove_check_page_size_change tlb_remove_check_page_size_change
 static inline void tlb_remove_check_page_size_change(struct mmu_gather *tlb,
 						     unsigned int page_size)
arch/um/include/asm/tlb.h +12 -0
@@ -130,6 +130,18 @@ static inline void tlb_remove_page_size(
 	return tlb_remove_page(tlb, page);
 }
 
+static inline void
+tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address,
+		    unsigned long size)
+{
+	tlb->need_flush = 1;
+
+	if (tlb->start > address)
+		tlb->start = address;
+	if (tlb->end < address + size)
+		tlb->end = address + size;
+}
+
 /**
  * tlb_remove_tlb_entry - remember a pte unmapping for later tlb invalidation.
  *
include/asm-generic/tlb.h +2 -0
@@ -118,6 +118,8 @@ void arch_tlb_gather_mmu(struct mmu_gath
 void tlb_flush_mmu(struct mmu_gather *tlb);
 void arch_tlb_finish_mmu(struct mmu_gather *tlb,
 			 unsigned long start, unsigned long end, bool force);
+void tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address,
+			 unsigned long size);
 extern bool __tlb_remove_page_size(struct mmu_gather *tlb, struct page *page,
 				   int page_size);
 
mm/hugetlb.c +19 -4
@@ -3425,6 +3425,7 @@ void __unmap_hugepage_range(struct mmu_g
 	unsigned long sz = huge_page_size(h);
 	unsigned long mmun_start = start;	/* For mmu_notifiers */
 	unsigned long mmun_end   = end;		/* For mmu_notifiers */
+	bool force_flush = false;
 
 	WARN_ON(!is_vm_hugetlb_page(vma));
 	BUG_ON(start & ~huge_page_mask(h));
@@ -3451,10 +3452,8 @@ void __unmap_hugepage_range(struct mmu_g
 		ptl = huge_pte_lock(h, mm, ptep);
 		if (huge_pmd_unshare(mm, &address, ptep)) {
 			spin_unlock(ptl);
-			/*
-			 * We just unmapped a page of PMDs by clearing a PUD.
-			 * The caller's TLB flush range should cover this area.
-			 */
+			tlb_flush_pmd_range(tlb, address & PUD_MASK, PUD_SIZE);
+			force_flush = true;
 			continue;
 		}
 
@@ -3511,6 +3510,22 @@ void __unmap_hugepage_range(struct mmu_g
 	}
 	mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);
 	tlb_end_vma(tlb, vma);
+
+	/*
+	 * If we unshared PMDs, the TLB flush was not recorded in mmu_gather. We
+	 * could defer the flush until now, since by holding i_mmap_rwsem we
+	 * guaranteed that the last refernece would not be dropped. But we must
+	 * do the flushing before we return, as otherwise i_mmap_rwsem will be
+	 * dropped and the last reference to the shared PMDs page might be
+	 * dropped as well.
+	 *
+	 * In theory we could defer the freeing of the PMD pages as well, but
+	 * huge_pmd_unshare() relies on the exact page_count for the PMD page to
+	 * detect sharing, so we cannot defer the release of the page either.
+	 * Instead, do flush now.
+	 */
+	if (force_flush)
+		tlb_flush_mmu_tlbonly(tlb);
 }
 
 void __unmap_hugepage_range_final(struct mmu_gather *tlb,
mm/memory.c +10 -0
@@ -324,6 +324,16 @@ bool __tlb_remove_page_size(struct mmu_g
 	return false;
 }
 
+void tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address,
+			 unsigned long size)
+{
+	if (tlb->page_size != 0 && tlb->page_size != PMD_SIZE)
+		tlb_flush_mmu(tlb);
+
+	tlb->page_size = PMD_SIZE;
+	tlb->start = min(tlb->start, address);
+	tlb->end = max(tlb->end, address + size);
+}
 #endif /* HAVE_GENERIC_MMU_GATHER */
 
 #ifdef CONFIG_HAVE_RCU_TABLE_FREE
author maintainer
#57 lore raw

PATCH 57/69 s390/mm: validate VMA in PGSTE manipulation functions

In reply to Greg Kroah-Hartman

From: David Hildenbrand <[email protected]>

commit fe3d10024073f06f04c74b9674bd71ccc1d787cf upstream.

We should not walk/touch page tables outside of VMA boundaries when holding only the mmap sem in read mode. Evil user space can modify the VMA layout just before this function runs and e.g., trigger races with page table removal code since commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap"). gfn_to_hva() will only translate using KVM memory regions, but won't validate the VMA.

Further, we should not allocate page tables outside of VMA boundaries: if evil user space decides to map hugetlbfs to these ranges, bad things will happen because we suddenly have PTE or PMD page tables where we shouldn't have them.

Similarly, we have to check if we suddenly find a hugetlbfs VMA, before calling get_locked_pte().

---
 arch/s390/mm/pgtable.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)
arch/s390/mm/pgtable.c +13 -0
@@ -970,6 +970,7 @@ EXPORT_SYMBOL(get_guest_storage_key);
 int pgste_perform_essa(struct mm_struct *mm, unsigned long hva, int orc,
 			unsigned long *oldpte, unsigned long *oldpgste)
 {
+	struct vm_area_struct *vma;
 	unsigned long pgstev;
 	spinlock_t *ptl;
 	pgste_t pgste;
@@ -979,6 +980,10 @@ int pgste_perform_essa(struct mm_struct
 	WARN_ON_ONCE(orc > ESSA_MAX);
 	if (unlikely(orc > ESSA_MAX))
 		return -EINVAL;
+
+	vma = find_vma(mm, hva);
+	if (!vma || hva < vma->vm_start || is_vm_hugetlb_page(vma))
+		return -EFAULT;
 	ptep = get_locked_pte(mm, hva, &ptl);
 	if (unlikely(!ptep))
 		return -EFAULT;
@@ -1071,10 +1076,14 @@ EXPORT_SYMBOL(pgste_perform_essa);
 int set_pgste_bits(struct mm_struct *mm, unsigned long hva,
 			unsigned long bits, unsigned long value)
 {
+	struct vm_area_struct *vma;
 	spinlock_t *ptl;
 	pgste_t new;
 	pte_t *ptep;
 
+	vma = find_vma(mm, hva);
+	if (!vma || hva < vma->vm_start || is_vm_hugetlb_page(vma))
+		return -EFAULT;
 	ptep = get_locked_pte(mm, hva, &ptl);
 	if (unlikely(!ptep))
 		return -EFAULT;
@@ -1099,9 +1108,13 @@ EXPORT_SYMBOL(set_pgste_bits);
  */
 int get_pgste(struct mm_struct *mm, unsigned long hva, unsigned long *pgstep)
 {
+	struct vm_area_struct *vma;
 	spinlock_t *ptl;
 	pte_t *ptep;
 
+	vma = find_vma(mm, hva);
+	if (!vma || hva < vma->vm_start || is_vm_hugetlb_page(vma))
+		return -EFAULT;
 	ptep = get_locked_pte(mm, hva, &ptl);
 	if (unlikely(!ptep))
 		return -EFAULT;
author maintainer
#3 lore raw

PATCH 3/69 usb: dwc2: hcd_queue: Fix use of floating point literal

In reply to Greg Kroah-Hartman

From: Nathan Chancellor <[email protected]>

commit 310780e825f3ffd211b479b8f828885a6faedd63 upstream.

A new commit in LLVM causes an error on the use of 'long double' when '-mno-x87' is used, which the kernel does through an alias, '-mno-80387' (see the LLVM commit below for more details around why it does this).

drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it

                         delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
                                             ^
 drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
 #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
                                 ^

1 error generated.

This happens due to the use of a 'long double' literal. The 'E6' part of '1E6L' causes the literal to be a 'double' then the 'L' suffix promotes it to 'long double'.

There is no visible reason for a floating point value in this driver, as the value is only used as a parameter to a function that expects an integer type. Use NSEC_PER_MSEC, which is the same integer value as '1E6L', to avoid changing functionality but fix the error.

---
 drivers/usb/dwc2/hcd_queue.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/dwc2/hcd_queue.c +1 -1
@@ -59,7 +59,7 @@
 #define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5))
 
 /* If we get a NAK, wait this long before retrying */
-#define DWC2_RETRY_WAIT_DELAY 1*1E6L
+#define DWC2_RETRY_WAIT_DELAY (1 * NSEC_PER_MSEC)
 
 /**
  * dwc2_periodic_channel_available() - Checks that a channel is available for a
author maintainer
#14 lore raw

PATCH 14/69 tracing: Fix pid filtering when triggers are attached

In reply to Greg Kroah-Hartman

From: Steven Rostedt (VMware) <[email protected]>

commit a55f224ff5f238013de8762c4287117e47b86e22 upstream.

If a event is filtered by pid and a trigger that requires processing of the event to happen is a attached to the event, the discard portion does not take the pid filtering into account, and the event will then be recorded when it should not have been.

Fixes 3fdaf80f4a836 ("tracing: Implement event pid filtering")
---
 kernel/trace/trace.h |   24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)
kernel/trace/trace.h +18 -6
@@ -1365,14 +1365,26 @@ __event_trigger_test_discard(struct trac
 	if (eflags & EVENT_FILE_FL_TRIGGER_COND)
 		*tt = event_triggers_call(file, entry, event);
 
-	if (test_bit(EVENT_FILE_FL_SOFT_DISABLED_BIT, &file->flags) ||
-	    (unlikely(file->flags & EVENT_FILE_FL_FILTERED) &&
-	     !filter_match_preds(file->filter, entry))) {
-		__trace_event_discard_commit(buffer, event);
-		return true;
-	}
+	if (likely(!(file->flags & (EVENT_FILE_FL_SOFT_DISABLED |
+				    EVENT_FILE_FL_FILTERED |
+				    EVENT_FILE_FL_PID_FILTER))))
+		return false;
+
+	if (file->flags & EVENT_FILE_FL_SOFT_DISABLED)
+		goto discard;
+
+	if (file->flags & EVENT_FILE_FL_FILTERED &&
+	    !filter_match_preds(file->filter, entry))
+		goto discard;
+
+	if ((file->flags & EVENT_FILE_FL_PID_FILTER) &&
+	    trace_event_ignore_this_pid(file))
+		goto discard;
 
 	return false;
+ discard:
+	__trace_event_discard_commit(buffer, event);
+	return true;
 }
 
 /**
author maintainer
#10 lore raw

PATCH 10/69 staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

commit b535917c51acc97fb0761b1edec85f1f3d02bda4 upstream.

The free_rtllib() function frees the "dev" pointer so there is use after free on the next line. Re-arrange things to avoid that.

Fixes 66898177e7e5 ("staging: rtl8192e: Fix unload/reload problem")
Cc stable <[email protected]>
---
 drivers/staging/rtl8192e/rtl8192e/rtl_core.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/staging/rtl8192e/rtl8192e/rtl_core.c +2 -1
@@ -2579,13 +2579,14 @@ static void _rtl92e_pci_disconnect(struc
 			free_irq(dev->irq, dev);
 			priv->irq = 0;
 		}
-		free_rtllib(dev);
 
 		if (dev->mem_start != 0) {
 			iounmap((void __iomem *)dev->mem_start);
 			release_mem_region(pci_resource_start(pdev, 1),
 					pci_resource_len(pdev, 1));
 		}
+
+		free_rtllib(dev);
 	} else {
 		priv = rtllib_priv(dev);
 	}
author maintainer
#13 lore raw

PATCH 13/69 xen: detect uninitialized xenbus in xenbus_init

In reply to Greg Kroah-Hartman

From: Stefano Stabellini <[email protected]>

commit 36e8f60f0867d3b70d398d653c17108459a04efe upstream.

If the xenstore page hasn't been allocated properly, reading the value of the related hvm_param (HVM_PARAM_STORE_PFN) won't actually return error. Instead, it will succeed and return zero. Instead of attempting to xen_remap a bad guest physical address, detect this condition and return early.

Note that although a guest physical address of zero for HVM_PARAM_STORE_PFN is theoretically possible, it is not a good choice and zero has never been validly used in that capacity.

Also recognize all bits set as an invalid value.

For 32-bit Linux, any pfn above ULONG_MAX would get truncated. Pfns above ULONG_MAX should never be passed by the Xen tools to HVM guests anyway, so check for this condition and return early.

---
 drivers/xen/xenbus/xenbus_probe.c |   23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
drivers/xen/xenbus/xenbus_probe.c +23 -0
@@ -886,6 +886,29 @@ static int __init xenbus_init(void)
 		err = hvm_get_parameter(HVM_PARAM_STORE_PFN, &v);
 		if (err)
 			goto out_error;
+		/*
+		 * Uninitialized hvm_params are zero and return no error.
+		 * Although it is theoretically possible to have
+		 * HVM_PARAM_STORE_PFN set to zero on purpose, in reality it is
+		 * not zero when valid. If zero, it means that Xenstore hasn't
+		 * been properly initialized. Instead of attempting to map a
+		 * wrong guest physical address return error.
+		 *
+		 * Also recognize all bits set as an invalid value.
+		 */
+		if (!v || !~v) {
+			err = -ENOENT;
+			goto out_error;
+		}
+		/* Avoid truncation on 32-bit. */
+#if BITS_PER_LONG == 32
+		if (v > ULONG_MAX) {
+			pr_err("%s: cannot handle HVM_PARAM_STORE_PFN=%llx > ULONG_MAX\n",
+			       __func__, v);
+			err = -EINVAL;
+			goto out_error;
+		}
+#endif
 		xen_store_gfn = (unsigned long)v;
 		xen_store_interface =
 			xen_remap(xen_store_gfn << XEN_PAGE_SHIFT,
author maintainer
#11 lore raw

PATCH 11/69 fuse: fix page stealing

In reply to Greg Kroah-Hartman

From: Miklos Szeredi <[email protected]>

commit 712a951025c0667ff00b25afc360f74e639dfabe upstream.

It is possible to trigger a crash by splicing anon pipe bufs to the fuse device.

The reason for this is that anon_pipe_buf_release() will reuse buf->page if the refcount is 1, but that page might have already been stolen and its flags modified (e.g. PG_lru added).

This happens in the unlikely case of fuse_dev_splice_write() getting around to calling pipe_buf_release() after a page has been stolen, added to the page cache and removed from the page cache.

Fix by calling pipe_buf_release() right after the page was inserted into the page cache. In this case the page has an elevated refcount so any release function will know that the page isn't reusable.

---
 fs/fuse/dev.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
fs/fuse/dev.c +12 -2
@@ -905,6 +905,12 @@ static int fuse_try_move_page(struct fus
 		goto out_put_old;
 	}
 
+	/*
+	 * Release while we have extra ref on stolen page.  Otherwise
+	 * anon_pipe_buf_release() might think the page can be reused.
+	 */
+	pipe_buf_release(cs->pipe, buf);
+
 	get_page(newpage);
 
 	if (!(buf->flags & PIPE_BUF_FLAG_LRU))
@@ -2054,8 +2060,12 @@ static ssize_t fuse_dev_splice_write(str
 
 	pipe_lock(pipe);
 out_free:
-	for (idx = 0; idx < nbuf; idx++)
-		pipe_buf_release(pipe, &bufs[idx]);
+	for (idx = 0; idx < nbuf; idx++) {
+		struct pipe_buffer *buf = &bufs[idx];
+
+		if (buf->ops)
+			pipe_buf_release(pipe, buf);
+	}
 	pipe_unlock(pipe);
 
 	kvfree(bufs);
author maintainer
#15 lore raw

PATCH 15/69 xtensa: use CONFIG_USE_OF instead of CONFIG_OF

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

commit d67ed2510d28a1eb33171010d35cf52178cfcbdd upstream.

CONFIG_OF can be set by a randconfig or by a user -- without setting the early flattree option (OF_EARLY_FLATTREE). This causes build errors. However, if randconfig or a user sets USE_OF in the Xtensa config, the right kconfig symbols are set to fix the build.

Fixes these build errors:

../arch/xtensa/kernel/setup.c:67:19: error: ‘__dtb_start’ undeclared here (not in a function); did you mean ‘dtb_start’?

   67 | void *dtb_start = __dtb_start;
      |                   ^~~~~~~~~~~

../arch/xtensa/kernel/setup.c: In function 'xtensa_dt_io_area':
../arch/xtensa/kernel/setup.c:201:14: error: implicit declaration of function 'of_flat_dt_is_compatible'; did you mean 'of_machine_is_compatible'? [-Werror=implicit-function-declaration]
201 | if (!of_flat_dt_is_compatible(node, "simple-bus"))
../arch/xtensa/kernel/setup.c:204:18: error: implicit declaration of function 'of_get_flat_dt_prop' [-Werror=implicit-function-declaration]
204 | ranges = of_get_flat_dt_prop(node, "ranges", &len);
../arch/xtensa/kernel/setup.c:204:16: error: assignment to 'const __be32 *' {aka 'const unsigned int *'} from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
204 | ranges = of_get_flat_dt_prop(node, "ranges", &len);
| ^
../arch/xtensa/kernel/setup.c: In function 'early_init_devtree':
../arch/xtensa/kernel/setup.c:228:9: error: implicit declaration of function 'early_init_dt_scan'; did you mean 'early_init_devtree'? [-Werror=implicit-function-declaration]
228 | early_init_dt_scan(params);
../arch/xtensa/kernel/setup.c:229:9: error: implicit declaration of function 'of_scan_flat_dt' [-Werror=implicit-function-declaration]
229 | of_scan_flat_dt(xtensa_dt_io_area, NULL);

xtensa-elf-ld: arch/xtensa/mm/mmu.o:(.text+0x0): undefined reference to `xtensa_kio_paddr'

Fixes da844a81779e ("xtensa: add device trees support")
Fixes 6cb971114f63 ("xtensa: remap io area defined in device tree")
---
 arch/xtensa/include/asm/vectors.h |    2 +-
 arch/xtensa/kernel/setup.c        |   12 ++++++------
 arch/xtensa/mm/mmu.c              |    2 +-
 3 files changed, 8 insertions(+), 8 deletions(-)
arch/xtensa/include/asm/vectors.h +1 -1
@@ -31,7 +31,7 @@
 #endif
 #define XCHAL_KIO_SIZE			0x10000000
 
-#if (!XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY) && defined(CONFIG_OF)
+#if (!XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY) && defined(CONFIG_USE_OF)
 #define XCHAL_KIO_PADDR			xtensa_get_kio_paddr()
 #ifndef __ASSEMBLY__
 extern unsigned long xtensa_kio_paddr;
arch/xtensa/kernel/setup.c +6 -6
@@ -65,7 +65,7 @@ int initrd_is_mapped = 0;
 extern int initrd_below_start_ok;
 #endif
 
-#ifdef CONFIG_OF
+#ifdef CONFIG_USE_OF
 void *dtb_start = __dtb_start;
 #endif
 
@@ -127,7 +127,7 @@ __tagtable(BP_TAG_INITRD, parse_tag_init
 
 #endif /* CONFIG_BLK_DEV_INITRD */
 
-#ifdef CONFIG_OF
+#ifdef CONFIG_USE_OF
 
 static int __init parse_tag_fdt(const bp_tag_t *tag)
 {
@@ -137,7 +137,7 @@ static int __init parse_tag_fdt(const bp
 
 __tagtable(BP_TAG_FDT, parse_tag_fdt);
 
-#endif /* CONFIG_OF */
+#endif /* CONFIG_USE_OF */
 
 static int __init parse_tag_cmdline(const bp_tag_t* tag)
 {
@@ -185,7 +185,7 @@ static int __init parse_bootparam(const
 }
 #endif
 
-#ifdef CONFIG_OF
+#ifdef CONFIG_USE_OF
 
 #if !XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY
 unsigned long xtensa_kio_paddr = XCHAL_KIO_DEFAULT_PADDR;
@@ -234,7 +234,7 @@ void __init early_init_devtree(void *par
 		strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 }
 
-#endif /* CONFIG_OF */
+#endif /* CONFIG_USE_OF */
 
 /*
  * Initialize architecture. (Early stage)
@@ -255,7 +255,7 @@ void __init init_arch(bp_tag_t *bp_start
 	if (bp_start)
 		parse_bootparam(bp_start);
 
-#ifdef CONFIG_OF
+#ifdef CONFIG_USE_OF
 	early_init_devtree(dtb_start);
 #endif
 
arch/xtensa/mm/mmu.c +1 -1
@@ -98,7 +98,7 @@ void init_mmu(void)
 
 void init_kio(void)
 {
-#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF)
+#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_USE_OF)
 	/*
 	 * Update the IO area mapping in case xtensa_kio_paddr has changed
 	 */
author maintainer
#12 lore raw

PATCH 12/69 xen: dont continue xenstore initialization in case of errors

In reply to Greg Kroah-Hartman

From: Stefano Stabellini <[email protected]>

commit 08f6c2b09ebd4b326dbe96d13f94fee8f9814c78 upstream.

In case of errors in xenbus_init (e.g. missing xen_store_gfn parameter), we goto out_error but we forget to reset xen_store_domain_type to XS_UNKNOWN. As a consequence xenbus_probe_initcall and other initcalls will still try to initialize xenstore resulting into a crash at boot.

[    2.479830] Call trace:
[    2.482314]  xb_init_comms+0x18/0x150
[    2.486354]  xs_init+0x34/0x138
[    2.489786]  xenbus_probe+0x4c/0x70
[    2.498432]  xenbus_probe_initcall+0x2c/0x7c
[    2.503944]  do_one_initcall+0x54/0x1b8
[    2.507358]  kernel_init_freeable+0x1ac/0x210
[    2.511617]  kernel_init+0x28/0x130
[    2.516112]  ret_from_fork+0x10/0x20
---
 drivers/xen/xenbus/xenbus_probe.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/xen/xenbus/xenbus_probe.c +3 -1
@@ -846,7 +846,7 @@ static struct notifier_block xenbus_resu
 
 static int __init xenbus_init(void)
 {
-	int err = 0;
+	int err;
 	uint64_t v = 0;
 	xen_store_domain_type = XS_UNKNOWN;
 
@@ -920,8 +920,10 @@ static int __init xenbus_init(void)
 	 */
 	proc_create_mount_point("xen");
 #endif
+	return 0;
 
 out_error:
+	xen_store_domain_type = XS_UNKNOWN;
 	return err;
 }
 
Tested-by on the v1 series
#70 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.19.219 release. There are 69 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.219-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Tested-by Hulk Robot on the v1 series
#71 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.19.219 release. There are 69 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.219-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

Tested on arm64 and x86 for 4.19.219-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.19.y
Version: 4.19.219-rc1
Commit: 64a98a60fb8990a42d2afcd274b7419ca74e42bf
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8943
passed: 8943
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8943
passed: 8943
failed: 0
timeout: 0
--------------------------------------------------------------------

maintainer Tested-by on the v1 series
#72 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.19.219 release. There are 69 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.219-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

All tests passing for Tegra ...

Test results for stable-v4.19:

    10 builds:	10 pass, 0 fail
    22 boots:	22 pass, 0 fail
    40 tests:	40 pass, 0 fail

Linux version: 4.19.219-rc1-g969701714472
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Jon

Tested-by Linux Kernel Functional Testing on the v1 series
#73 lore raw
In reply to Greg Kroah-Hartman
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.19.219 release. There are 69 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.219-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 4.19.219-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.19.y
* git commit: 9697017144726ee73f348d6bb4c549151f92320a
* git describe: v4.19.218-70-g969701714472
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.218-70-g969701714472

## No regressions (compared to v4.19.217-321-g078e3b8561f3)

## No fixes (compared to v4.19.217-321-g078e3b8561f3)

## Test result summary
total: 66999, pass: 54132, fail: 570, skip: 10820, xfail: 1477

## Build Summary
* arm: 130 total, 130 passed, 0 failed
* arm64: 35 total, 35 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 19 total, 19 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 26 total, 26 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 22 total, 22 passed, 0 failed

## Test suites summary
* fwts
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Tested-by on the v1 series
#74 lore raw
In reply to Greg Kroah-Hartman

Hi Greg,

Quoted 7 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.19.219 release. There are 69 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000. Anything received after that time might be too late.

Build test:
mips (gcc version 11.2.1 20211112): 63 configs -> no failure arm (gcc version 11.2.1 20211112): 116 configs -> no new failure arm64 (gcc version 11.2.1 20211112): 2 configs -> no failure x86_64 (gcc version 11.2.1 20211112): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]

[1]. https://openqa.qa.codethink.co.uk/tests/452

--
Regards
Sudip

Tested-by on the v1 series
#75 lore raw
In reply to Greg Kroah-Hartman

Hi!

Quoted 4 lines

This is the start of the stable review cycle for the 4.19.219 release. There are 69 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y

Best regards,
Pavel

Signature · 2 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Tested-by on the v1 series
#76 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.19.219 release. There are 69 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 01 Dec 2021 18:16:51 +0000. Anything received after that time might be too late.

Build results:

	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 441 pass: 441 fail: 0

Guenter