Skip to contentSkip to conversation

arc: perf: Move static structs to where they're really used

PATCH In review Alexey Brodkin 2 participants 2 messages Nov 29, 2021 – Dec 29, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arc: perf: Move static structs to where they're really used

It is all well described by Stephen Rothwell who initially spotted that:
----------------------------->8---------------------------- After merging the origin tree, today's linux-next build (arc haps_hs_smp_defconfig+kselftest) produced these warnings:

arch/arc/include/asm/perf_event.h:126:27: warning: 'arc_pmu_cache_map' defined but not used [-Wunused-const-variable=] arch/arc/include/asm/perf_event.h:91:27: warning: 'arc_pmu_ev_hw_map' defined but not used [-Wunused-const-variable=]

Introduced by commit 0dd450fe13da ("ARC: Add perf support for ARC700 cores")

The 2 static arrays should be moved into arch/arc/kernel/perf_event.c (the only place that uses them). We get the warning because perf_event.h is also included by arch/arc/kernel/unaligned.c. ----------------------------->8----------------------------

Could be easily reproduced by running make with "W=1" on any up-to-date sources, when extra warnings get enabled (in particular "-Wunused-const-variable"), otherwise disabled by default in the top-level Makefile as "These warnings generated too much noise in a regular build".

Cc Stephen Rothwell <[email protected]>
Cc Mischa Jonker <[email protected]>
Cc Vineet Gupta <[email protected]>
---
 arch/arc/include/asm/perf_event.h | 162 --------------------------------------
 arch/arc/kernel/perf_event.c      | 162 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 162 insertions(+), 162 deletions(-)
arch/arc/include/asm/perf_event.h +0 -162
index e1971d34ef30..4c919c0f4b30 100644
@@ -63,166 +63,4 @@ struct arc_reg_cc_build {
 
 #define PERF_COUNT_ARC_HW_MAX	(PERF_COUNT_HW_MAX + 8)
 
-/*
- * Some ARC pct quirks:
- *
- * PERF_COUNT_HW_STALLED_CYCLES_BACKEND
- * PERF_COUNT_HW_STALLED_CYCLES_FRONTEND
- *	The ARC 700 can either measure stalls per pipeline stage, or all stalls
- *	combined; for now we assign all stalls to STALLED_CYCLES_BACKEND
- *	and all pipeline flushes (e.g. caused by mispredicts, etc.) to
- *	STALLED_CYCLES_FRONTEND.
- *
- *	We could start multiple performance counters and combine everything
- *	afterwards, but that makes it complicated.
- *
- *	Note that I$ cache misses aren't counted by either of the two!
- */
-
-/*
- * ARC PCT has hardware conditions with fixed "names" but variable "indexes"
- * (based on a specific RTL build)
- * Below is the static map between perf generic/arc specific event_id and
- * h/w condition names.
- * At the time of probe, we loop thru each index and find it's name to
- * complete the mapping of perf event_id to h/w index as latter is needed
- * to program the counter really
- */
-static const char * const arc_pmu_ev_hw_map[] = {
-	/* count cycles */
-	[PERF_COUNT_HW_CPU_CYCLES] = "crun",
-	[PERF_COUNT_HW_REF_CPU_CYCLES] = "crun",
-	[PERF_COUNT_HW_BUS_CYCLES] = "crun",
-
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = "bflush",
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = "bstall",
-
-	/* counts condition */
-	[PERF_COUNT_HW_INSTRUCTIONS] = "iall",
-	/* All jump instructions that are taken */
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmptak",
-#ifdef CONFIG_ISA_ARCV2
-	[PERF_COUNT_HW_BRANCH_MISSES] = "bpmp",
-#else
-	[PERF_COUNT_ARC_BPOK]         = "bpok",	  /* NP-NT, PT-T, PNT-NT */
-	[PERF_COUNT_HW_BRANCH_MISSES] = "bpfail", /* NP-T, PT-NT, PNT-T */
-#endif
-	[PERF_COUNT_ARC_LDC] = "imemrdc",	/* Instr: mem read cached */
-	[PERF_COUNT_ARC_STC] = "imemwrc",	/* Instr: mem write cached */
-
-	[PERF_COUNT_ARC_DCLM] = "dclm",		/* D-cache Load Miss */
-	[PERF_COUNT_ARC_DCSM] = "dcsm",		/* D-cache Store Miss */
-	[PERF_COUNT_ARC_ICM] = "icm",		/* I-cache Miss */
-	[PERF_COUNT_ARC_EDTLB] = "edtlb",	/* D-TLB Miss */
-	[PERF_COUNT_ARC_EITLB] = "eitlb",	/* I-TLB Miss */
-
-	[PERF_COUNT_HW_CACHE_REFERENCES] = "imemrdc",	/* Instr: mem read cached */
-	[PERF_COUNT_HW_CACHE_MISSES] = "dclm",		/* D-cache Load Miss */
-};
-
-#define C(_x)			PERF_COUNT_HW_CACHE_##_x
-#define CACHE_OP_UNSUPPORTED	0xffff
-
-static const unsigned int arc_pmu_cache_map[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
-	[C(L1D)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_LDC,
-			[C(RESULT_MISS)]	= PERF_COUNT_ARC_DCLM,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_STC,
-			[C(RESULT_MISS)]	= PERF_COUNT_ARC_DCSM,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= PERF_COUNT_HW_INSTRUCTIONS,
-			[C(RESULT_MISS)]	= PERF_COUNT_ARC_ICM,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_LDC,
-			[C(RESULT_MISS)]	= PERF_COUNT_ARC_EDTLB,
-		},
-			/* DTLB LD/ST Miss not segregated by h/w*/
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= PERF_COUNT_ARC_EITLB,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] = PERF_COUNT_HW_BRANCH_INSTRUCTIONS,
-			[C(RESULT_MISS)]	= PERF_COUNT_HW_BRANCH_MISSES,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(NODE)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
 #endif /* __ASM_PERF_EVENT_H */
arch/arc/kernel/perf_event.c +162 -0

168 lines not on this page · raw message

Signature · 1 line
2.16.2
maintainer
#1 lore raw
Quoted 20 lines · Alexey Brodkin

It is all well described by Stephen Rothwell who initially spotted that:
----------------------------->8---------------------------- After merging the origin tree, today's linux-next build (arc haps_hs_smp_defconfig+kselftest) produced these warnings:

arch/arc/include/asm/perf_event.h:126:27: warning: 'arc_pmu_cache_map' defined but not used [-Wunused-const-variable=] arch/arc/include/asm/perf_event.h:91:27: warning: 'arc_pmu_ev_hw_map' defined but not used [-Wunused-const-variable=]

Introduced by commit 0dd450fe13da ("ARC: Add perf support for ARC700 cores")

The 2 static arrays should be moved into arch/arc/kernel/perf_event.c (the only place that uses them). We get the warning because perf_event.h is also included by arch/arc/kernel/unaligned.c. ----------------------------->8----------------------------

Could be easily reproduced by running make with "W=1" on any up-to-date sources, when extra warnings get enabled (in particular "-Wunused-const-variable"), otherwise disabled by default in the top-level Makefile as "These warnings generated too much noise in a regular build".

Quoted 4 lines
Cc Stephen Rothwell<[email protected]>
Cc Mischa Jonker<[email protected]>
Cc Vineet Gupta<[email protected]>

Added to ARC tree.

Thx,
-Vineet