ARM: tegra: Add compatible string for built-in ASIX on Colibri boards
Subsystems (2)
PATCH 1/1 ARM: tegra: Add compatible string for built-in ASIX on Colibri boards
From: Thierry Reding <[email protected]>
The device tree node for the built-in ASIX Ethernet device on Colibri boards needs a compatible string in order to pass DT schema validation. Add the USB VID,PID compatible string as required by the DT schema for USB devices.
---
Marcel, Philippe, I've used the USB vendor and device IDs from the ASIX driver match entry for the AX88772B module, but do you have a quick way of verifying that that's indeed the ID that the device reports in those systems?
Rob, I do get a checkpatch.pl warning for this new compatible string, but I'm not sure there's anything easy that could be done about this, other than perhaps making checkpatch.pl aware of the special USB (and potentially PCI) compatible strings as well.
--- arch/arm/boot/dts/tegra20-colibri.dtsi | 1 + arch/arm/boot/dts/tegra30-colibri.dtsi | 1 + 2 files changed, 2 insertions(+)
arch/arm/boot/dts/tegra20-colibri.dtsi +1 -0
@@ -689,6 +689,7 @@ usb@c5004000 { #size-cells = <0>; asix@1 { + compatible = "usbb95,772b"; reg = <1>; local-mac-address = [00 00 00 00 00 00]; };
arch/arm/boot/dts/tegra30-colibri.dtsi +1 -0
@@ -950,6 +950,7 @@ usb@7d004000 { #size-cells = <0>; asix@1 { + compatible = "usbb95,772b"; reg = <1>; local-mac-address = [00 00 00 00 00 00]; };
Signature · 1 line
2.33.1
Quoted 8 lines · Thierry Reding
From: Thierry Reding <[email protected]>
The device tree node for the built-in ASIX Ethernet device on Colibri boards needs a compatible string in order to pass DT schema validation. Add the USB VID,PID compatible string as required by the DT schema for USB devices.
Signed-off-by Thierry Reding <[email protected]>
Quoted 5 lines
---
Marcel, Philippe, I've used the USB vendor and device IDs from the ASIX driver match entry for the AX88772B module, but do you have a quick way of verifying that that's indeed the ID that the device reports in those systems?
Yes, that looks fine:
root@colibri-t30:~# uname -a Linux colibri-t30 5.16.0-rc4-next-20211207-00025-g122da7b0a9d4 #2 SMP PREEMPT Tue Dec 7 16:54:46 CET 2021 armv7l GNU/Linux root@colibri-t30:~# lsusb Bus 003 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 0b95:772b ASIX Electronics Corp. AX88772B Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Thanks, Thierry!
Quoted 33 lines
Rob, I do get a checkpatch.pl warning for this new compatible string, but I'm not sure there's anything easy that could be done about this, other than perhaps making checkpatch.pl aware of the special USB (and potentially PCI) compatible strings as well.
---
arch/arm/boot/dts/tegra20-colibri.dtsi | 1 +arch/arm/boot/dts/tegra30-colibri.dtsi| 1 +2 files changed, 2 insertions(+)arch/arm/boot/dts/tegra20-colibri.dtsi +0
-0@@ -689,6 +689,7 @@ usb@c5004000 { #size-cells = <0>;
asix@1 {
+ compatible = "usbb95,772b"; reg = <1>;
local-mac-address = [00 00 00 00 00 00]; };arch/arm/boot/dts/tegra30-colibri.dtsi +0
-0@@ -950,6 +950,7 @@ usb@7d004000 { #size-cells = <0>;
asix@1 {
+ compatible = "usbb95,772b"; reg = <1>;
local-mac-address = [00 00 00 00 00 00]; };