Skip to contentSkip to conversation

soc: tegra: cbb: Add CBB1.0 driver for Tegra194

PATCH Superseded Sumit Gupta 1 participant 1 message Dec 9, 2021 Tegra architecture support

v1 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

PATCH 4/8 soc: tegra: cbb: Add CBB1.0 driver for Tegra194

Adding driver to handle errors from Control Backbone(CBB) which are generated due to illegal accesses. CBB1.0 is used in Tegra194 SOC. When an error is reported from a NOC within CBB, the driver prints debug information about failed transaction like Error Code, Error Description, Master, Address, AXI ID, Cache, Protection, Security Group etc. It then causes system crash using BUG_ON() or call WARN() based on whether the error type is fatal or not.

---
 drivers/soc/tegra/Kconfig            |    9 +
 drivers/soc/tegra/Makefile           |    1 +
 drivers/soc/tegra/cbb/Makefile       |    8 +
 drivers/soc/tegra/cbb/tegra-cbb.c    |  199 +++
 drivers/soc/tegra/cbb/tegra194-cbb.c | 2266 ++++++++++++++++++++++++++
 include/soc/tegra/tegra-cbb.h        |   43 +
 include/soc/tegra/tegra194-cbb.h     |  158 ++
 7 files changed, 2684 insertions(+)
 create mode 100644 drivers/soc/tegra/cbb/Makefile
 create mode 100644 drivers/soc/tegra/cbb/tegra-cbb.c
 create mode 100644 drivers/soc/tegra/cbb/tegra194-cbb.c
 create mode 100644 include/soc/tegra/tegra-cbb.h
 create mode 100644 include/soc/tegra/tegra194-cbb.h
drivers/soc/tegra/Kconfig +9 -0
index 8b53ed1cc67e..0520b9744ec4 100644
@@ -161,3 +161,12 @@ config SOC_TEGRA30_VOLTAGE_COUPLER
 	bool "Voltage scaling support for Tegra30 SoCs"
 	depends on ARCH_TEGRA_3x_SOC || COMPILE_TEST
 	depends on REGULATOR
+
+config SOC_TEGRA_CBB
+	tristate "Tegra driver to handle error from CBB"
+	depends on ARCH_TEGRA_194_SOC
+	default y
+	help
+	  Support for handling error from Tegra Control Backbone(CBB).
+	  This driver handles the errors from CBB and prints debug
+	  information about the failed transactions.
drivers/soc/tegra/Makefile +1 -0
index 054e862b63d8..d722f512dc9d 100644
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-y += fuse/
+obj-y += cbb/
 
 obj-y += common.o
 obj-$(CONFIG_SOC_TEGRA_FLOWCTRL) += flowctrl.o
drivers/soc/tegra/cbb/Makefile new file +8 -0
new file mode 100644
index 000000000000..3f9ff6575628
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Control Backbone Driver code.
+#
+ifdef CONFIG_SOC_TEGRA_CBB
+obj-y += tegra-cbb.o
+obj-$(CONFIG_ARCH_TEGRA_194_SOC)        += tegra194-cbb.o
+endif
drivers/soc/tegra/cbb/tegra-cbb.c new file +199 -0

199 lines not on this page · raw message

drivers/soc/tegra/cbb/tegra194-cbb.c new file +2266 -0

2,266 lines not on this page · raw message

include/soc/tegra/tegra-cbb.h new file +43 -0

43 lines not on this page · raw message

include/soc/tegra/tegra194-cbb.h new file +158 -0

158 lines not on this page · raw message

Signature · 1 line
2.17.1