tests: fix raid0 tests for 0.90 metadata
PATCH 2/6 tests: fix raid0 tests for 0.90 metadata
Some of the test cases fail because raid0 creation fails with the error, "0.90 metadata does not support layouts for RAID0" added by commit, 329dfc28debb. Fix some of the test cases by switching from raid0 to linear level for 0.9 metadata where possible.
Signed-off-by Sudhakar Panneerselvam <[email protected]>
--- tests/00raid0 | 4 ++-- tests/00readonly | 4 ++++ tests/03r0assem | 6 +++--- tests/04r0update | 4 ++-- tests/04update-metadata | 2 +- 5 files changed, 12 insertions(+), 8 deletions(-)
tests/00raid0 +2 -2
@@ -20,8 +20,8 @@ mdadm -S $md0 # now same again with different chunk size for chunk in 4 32 256 do - mdadm -CR $md0 -e0.90 -l raid0 --chunk $chunk -n3 $dev0 $dev1 $dev2 - check raid0 + mdadm -CR $md0 -e0.90 -l linear --chunk $chunk -n3 $dev0 $dev1 $dev2 + check linear testdev $md0 3 $mdsize0 $chunk mdadm -S $md0
tests/00readonly +4 -0
@@ -4,6 +4,10 @@ for metadata in 0.9 1.0 1.1 1.2 do for level in linear raid0 raid1 raid4 raid5 raid6 raid10 do + if [[ $metadata == "0.9" && $level == "raid0" ]]; + then + continue + fi mdadm -CR $md0 -l $level -n 4 --metadata=$metadata \ $dev1 $dev2 $dev3 $dev4 --assume-clean check nosync
tests/03r0assem +3 -3
@@ -68,9 +68,9 @@ mdadm -S $md2 ### Now for version 0... mdadm --zero-superblock $dev0 $dev1 $dev2 -mdadm -CR $md2 -l0 --metadata=0.90 -n3 $dev0 $dev1 $dev2 -check raid0 -tst="testdev $md2 3 $mdsize0 512" +mdadm -CR $md2 -llinear --metadata=0.90 -n3 $dev0 $dev1 $dev2 +check linear +tst="testdev $md2 3 $mdsize0 1" $tst uuid=`mdadm -Db $md2 | sed 's/.*UUID=//'`
tests/04r0update +2 -2
@@ -1,7 +1,7 @@ # create a raid0, re-assemble with a different super-minor -mdadm -CR -e 0.90 $md0 -l0 -n3 $dev0 $dev1 $dev2 -testdev $md0 3 $mdsize0 512 +mdadm -CR -e 0.90 $md0 -llinear -n3 $dev0 $dev1 $dev2 +testdev $md0 3 $mdsize0 1 minor1=`mdadm -E $dev0 | sed -n -e 's/.*Preferred Minor : //p'` mdadm -S /dev/md0
tests/04update-metadata +1 -1
@@ -8,7 +8,7 @@ set -xe dlist="$dev0 $dev1 $dev2 $dev3" -for ls in raid0/4 linear/4 raid1/1 raid5/3 raid6/2 +for ls in linear/4 raid1/1 raid5/3 raid6/2 do s=${ls#*/} l=${ls%/*} mdadm -CR --assume-clean -e 0.90 $md0 --level $l -n 4 -c 64 $dlist
Signature · 1 line
1.8.3.1