arm64: dts: qcom: Add support for SM8450 SoC and
v3 cover arm64: dts: qcom: Add support for SM8450 SoC and
Snapdragon 8 Gen 1 Mobile Platform [1] (SM8450) is the latest Qualcomm SoC announced today.
This series adds the DTS support including clocks, tlmm, smmu, regulators, ufs, interconnects, pmics and cpufreq found in the SM8450 QRD board.
[1]: https://www.qualcomm.com/products/snapdragon-8-gen-1-mobile-platform
Changes in v3:
- drop spmi and icc patches
- add the tags recieved
Changes in v2:
- add the acks recieved
- move gpio header include to soc dts
- fix the uart node name
- rework pinctrol nodes
- drop cpu clusters
- fix consistency in nodes for reserved mem and icc
- Squash some patches into qrd dts patches
Dmitry Baryshkov (2):
arm64: dts: qcom: sm8450: Add rpmhpd node
arm64: dts: qcom: sm8450: add i2c13 and i2c14 device nodes
Vinod Koul (8):
arm64: dts: qcom: Add base SM8450 DTSI
arm64: dts: qcom: sm8450: Add tlmm nodes
arm64: dts: qcom: sm8450: Add reserved memory nodes
arm64: dts: qcom: sm8450: add smmu nodes
arm64: dts: qcom: Add base SM8450 QRD DTS
arm64: dts: qcom: sm8450-qrd: Add rpmh regulator nodes
arm64: dts: qcom: sm8450: add ufs nodes
arm64: dts: qcom: sm8450-qrd: enable ufs nodes
Vladimir Zapolskiy (1):
arm64: dts: qcom: sm8450: add cpufreq support
arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 375 +++++++++ arch/arm64/boot/dts/qcom/sm8450.dtsi | 1026 +++++++++++++++++++++++ 3 files changed, 1402 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8450-qrd.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8450.dtsi
Signature · 1 line
2.31.1
PATCH v3 1/11 arm64: dts: qcom: Add base SM8450 DTSI
This add based DTSI for SM8450 SoC and includes base description of CPUs, GCC, RPMHCC, UART, interuupt-controller which helps to boot to shell with console on boards with this SoC
--- arch/arm64/boot/dts/qcom/sm8450.dtsi | 476 +++++++++++++++++++++++++++ 1 file changed, 476 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8450.dtsi
arch/arm64/boot/dts/qcom/sm8450.dtsi new file +476 -0
@@ -0,0 +1,476 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-sm8450.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <76800000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <274>; + exit-latency-us = <480>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <327>; + exit-latency-us = <1502>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-l3-off"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <584>; + exit-latency-us = <2332>; + min-residency-us = <6118>; + local-timer-stop; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <2893>; + exit-latency-us = <4023>; + min-residency-us = <9987>; + local-timer-stop; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8450", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@a0000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0xa0000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm8450"; + reg = <0x0 0x00100000 0x0 0x1f4200>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x009c0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + uart7: serial@99c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8450-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; + qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>, + <94 609 31>, <125 63 1>, <126 716 12>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + intc: interrupt-controller@17100000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x40000>; + reg = <0x0 0x17100000 0x0 0x10000>, /* GICD */ + <0x0 0x17180000 0x0 0x200000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer@17420000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + reg = <0x0 0x17420000 0x0 0x1000>; + clock-frequency = <19200000>; + + frame@17421000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17421000 0x0 0x1000>, + <0x0 0x17422000 0x0 0x1000>; + }; + + frame@17423000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17423000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17425000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17425000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17427000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17427000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17429000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17429000 0x0 0x1000>; + status = "disabled"; + }; + + frame@1742b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x1742b000 0x0 0x1000>; + status = "disabled"; + }; + + frame@1742d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x1742d000 0x0 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@17a00000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x17a00000 0x0 0x10000>, + <0x0 0x17a10000 0x0 0x10000>, + <0x0 0x17a20000 0x0 0x10000>, + <0x0 0x17a30000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2", "drv-3"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>, + <WAKE_TCS 2>, <CONTROL_TCS 0>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sm8450-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <19200000>; + }; +};
Signature · 1 line
2.31.1
PATCH v3 2/11 arm64: dts: qcom: sm8450: Add tlmm nodes
In reply to Vinod KoulAdd tlmm node found in SM8450 SoC and uart pin configuration
--- arch/arm64/boot/dts/qcom/sm8450.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
arch/arm64/boot/dts/qcom/sm8450.dtsi +28 -0
@@ -343,6 +343,8 @@ uart7: serial@99c000 { reg = <0 0x0099c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>;
@@ -366,6 +368,32 @@ pdc: interrupt-controller@b220000 { interrupt-controller; }; + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8450-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 211>; + wakeup-parent = <&pdc>; + + qup_uart7_rx: qup-uart7-rx { + pins = "gpio26"; + function = "qup7"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart7_tx: qup-uart7-tx { + pins = "gpio27"; + function = "qup7"; + drive-strength = <2>; + bias-disable; + }; + }; + intc: interrupt-controller@17100000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>;
Signature · 1 line
2.31.1
PATCH v3 3/11 arm64: dts: qcom: sm8450: Add reserved memory nodes
In reply to Vinod KoulAdd the reserved memory nodes for SM8450. This is based on the downstream documentation.
--- arch/arm64/boot/dts/qcom/sm8450.dtsi | 221 +++++++++++++++++++++++++++ 1 file changed, 221 insertions(+)
arch/arm64/boot/dts/qcom/sm8450.dtsi +221 -0
@@ -310,6 +310,227 @@ CLUSTER_PD: cpu-cluster0 { }; }; + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_dt_log_mem: memory@80600000 { + reg = <0x0 0x80600000 0x0 0x40000>; + no-map; + }; + + xbl_ramdump_mem: memory@80640000 { + reg = <0x0 0x80640000 0x0 0x180000>; + no-map; + }; + + xbl_sc_mem: memory@807c0000 { + reg = <0x0 0x807c0000 0x0 0x40000>; + no-map; + }; + + aop_image_mem: memory@80800000 { + reg = <0x0 0x80800000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: memory@80860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x80860000 0x0 0x20000>; + no-map; + }; + + aop_config_mem: memory@80880000 { + reg = <0x0 0x80880000 0x0 0x20000>; + no-map; + }; + + tme_crash_dump_mem: memory@808a0000 { + reg = <0x0 0x808a0000 0x0 0x40000>; + no-map; + }; + + tme_log_mem: memory@808e0000 { + reg = <0x0 0x808e0000 0x0 0x4000>; + no-map; + }; + + uefi_log_mem: memory@808e4000 { + reg = <0x0 0x808e4000 0x0 0x10000>; + no-map; + }; + + /* secdata region can be reused by apps */ + smem: memory@80900000 { + compatible = "qcom,smem"; + reg = <0x0 0x80900000 0x0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + cpucp_fw_mem: memory@80b00000 { + reg = <0x0 0x80b00000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap: memory@80c00000 { + reg = <0x0 0x80c00000 0x0 0x4600000>; + no-map; + }; + + camera_mem: memory@85200000 { + reg = <0x0 0x85200000 0x0 0x500000>; + no-map; + }; + + video_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x700000>; + no-map; + }; + + adsp_mem: memory@85e00000 { + reg = <0x0 0x85e00000 0x0 0x2100000>; + no-map; + }; + + slpi_mem: memory@88000000 { + reg = <0x0 0x88000000 0x0 0x1900000>; + no-map; + }; + + cdsp_mem: memory@89900000 { + reg = <0x0 0x89900000 0x0 0x2000000>; + no-map; + }; + + ipa_fw_mem: memory@8b900000 { + reg = <0x0 0x8b900000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@8b910000 { + reg = <0x0 0x8b910000 0x0 0xa000>; + no-map; + }; + + gpu_micro_code_mem: memory@8b91a000 { + reg = <0x0 0x8b91a000 0x0 0x2000>; + no-map; + }; + + spss_region_mem: memory@8ba00000 { + reg = <0x0 0x8ba00000 0x0 0x180000>; + no-map; + }; + + /* First part of the "SPU secure shared memory" region */ + spu_tz_shared_mem: memory@8bb80000 { + reg = <0x0 0x8bb80000 0x0 0x60000>; + no-map; + }; + + /* Second part of the "SPU secure shared memory" region */ + spu_modem_shared_mem: memory@8bbe0000 { + reg = <0x0 0x8bbe0000 0x0 0x20000>; + no-map; + }; + + mpss_mem: memory@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x13200000>; + no-map; + }; + + cvp_mem: memory@9ee00000 { + reg = <0x0 0x9ee00000 0x0 0x700000>; + no-map; + }; + + global_sync_mem: memory@a6f00000 { + reg = <0x0 0xa6f00000 0x0 0x100000>; + no-map; + }; + + /* uefi region can be reused by APPS */ + + /* Linux kernel image is loaded at 0xa0000000 */ + + oem_vm_mem: memory@bb000000 { + reg = <0x0 0xbb000000 0x0 0x5000000>; + no-map; + }; + + mte_mem: memory@c0000000 { + reg = <0x0 0xc0000000 0x0 0x20000000>; + no-map; + }; + + qheebsp_reserved_mem: memory@e0000000 { + reg = <0x0 0xe0000000 0x0 0x600000>; + no-map; + }; + + cpusys_vm_mem: memory@e0600000 { + reg = <0x0 0xe0600000 0x0 0x400000>; + no-map; + }; + + hyp_reserved_mem: memory@e0a00000 { + reg = <0x0 0xe0a00000 0x0 0x100000>; + no-map; + }; + + trust_ui_vm_mem: memory@e0b00000 { + reg = <0x0 0xe0b00000 0x0 0x4af3000>; + no-map; + }; + + trust_ui_vm_qrtr: memory@e55f3000 { + reg = <0x0 0xe55f3000 0x0 0x9000>; + no-map; + }; + + trust_ui_vm_vblk0_ring: memory@e55fc000 { + reg = <0x0 0xe55fc000 0x0 0x4000>; + no-map; + }; + + trust_ui_vm_swiotlb: memory@e5600000 { + reg = <0x0 0xe5600000 0x0 0x100000>; + no-map; + }; + + tz_stat_mem: memory@e8800000 { + reg = <0x0 0xe8800000 0x0 0x100000>; + no-map; + }; + + tags_mem: memory@e8900000 { + reg = <0x0 0xe8900000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: memory@e9b00000 { + reg = <0x0 0xe9b00000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: memory@ea000000 { + reg = <0x0 0xea000000 0x0 0x3900000>; + no-map; + }; + + trusted_apps_ext_mem: memory@ed900000 { + reg = <0x0 0xed900000 0x0 0x3b00000>; + no-map; + }; + }; + soc: soc@0 { #address-cells = <2>; #size-cells = <2>;
Signature · 1 line
2.31.1
PATCH v3 4/11 arm64: dts: qcom: sm8450: add smmu nodes
In reply to Vinod KoulAdd the apps smmu node as found in the SM8450 SoC
--- arch/arm64/boot/dts/qcom/sm8450.dtsi | 103 +++++++++++++++++++++++++++ 1 file changed, 103 insertions(+)
arch/arm64/boot/dts/qcom/sm8450.dtsi +103 -0
@@ -615,6 +615,109 @@ qup_uart7_tx: qup-uart7-tx { }; }; + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8450-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>; + }; + intc: interrupt-controller@17100000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>;
Signature · 1 line
2.31.1
PATCH v3 5/11 arm64: dts: qcom: Add base SM8450 QRD DTS
In reply to Vinod KoulAdd DTS for Qualcomm QRD platform which uses SM8450 SoC and mark the reserved nodes.
--- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 33 +++++++++++++++++++++++++ 2 files changed, 34 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8450-qrd.dts
arch/arm64/boot/dts/qcom/Makefile +1 -0
@@ -107,3 +107,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb
arch/arm64/boot/dts/qcom/sm8450-qrd.dts new file +33 -0
@@ -0,0 +1,33 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +/dts-v1/; + +#include "sm8450.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8450 QRD"; + compatible = "qcom,sm8450-qrd", "qcom,sm8450"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <28 4>, <36 4>; +}; + +&uart7 { + status = "okay"; +};
Signature · 1 line
2.31.1
PATCH v3 6/11 arm64: dts: qcom: sm8450-qrd: Add rpmh regulator nodes
In reply to Vinod KoulAdd the RPMH regulators found in QRD-SM8450 platform
--- arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 322 ++++++++++++++++++++++++ 1 file changed, 322 insertions(+)
arch/arm64/boot/dts/qcom/sm8450-qrd.dts +322 -0
@@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8450.dtsi" / {
@@ -18,6 +19,327 @@ aliases { chosen { stdout-path = "serial0:115200n8"; }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&vreg_s11b_0p95>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&vreg_s12b_1p25>; + vdd-l8-supply = <&vreg_s2h_0p95>; + + vreg_s10b_1p8: smps10 { + regulator-name = "vreg_s10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s11b_0p95: smps11 { + regulator-name = "vreg_s11b_0p95"; + regulator-min-microvolt = <848000>; + regulator-max-microvolt = <1104000>; + }; + + vreg_s12b_1p25: smps12 { + regulator-name = "vreg_s12b_1p25"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_l1b_0p91: ldo1 { + regulator-name = "vreg_l1b_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p07: ldo2 { + regulator-name = "vreg_l2b_3p07"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b_0p9: ldo3 { + regulator-name = "vreg_l3b_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_0p88: ldo5 { + regulator-name = "vreg_l5b_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p5: ldo7 { + regulator-name = "vreg_l7b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_bob>; + vdd-l2-l8-supply = <&vreg_bob>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_1p86: smps1 { + regulator-name = "vreg_s1c_1p86"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2024000>; + }; + + vreg_s10c_1p05: smps10 { + regulator-name = "vreg_s10c_1p05"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_3p0: ldo3 { + regulator-name = "vreg_l3c_3p0"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-name = "vreg_l4c_1p8"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_1p8: ldo6 { + regulator-name = "vreg_l6c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p8: ldo12 { + regulator-name = "vreg_l12c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_3p0: ldo13 { + regulator-name = "vreg_l13c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8450-rpmh-regulators { + compatible = "qcom,pm8450-rpmh-regulators"; + qcom,pmic-id = "h"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vdd-l2-supply = <&vreg_bob>; + vdd-l3-supply = <&vreg_bob>; + vdd-l4-supply = <&vreg_bob>; + + vreg_s2h_0p95: smps2 { + regulator-name = "vreg_s2h_0p95"; + regulator-min-microvolt = <848000>; + regulator-max-microvolt = <1104000>; + }; + + vreg_s3h_0p5: smps3 { + regulator-name = "vreg_s3h_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + }; + + vreg_l2h_0p91: ldo2 { + regulator-name = "vreg_l2h_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3h_0p91: ldo3 { + regulator-name = "vreg_l3h_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + }; + + pmr735a-rpmh-regulators { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&vreg_s2e_0p85>; + vdd-l3-supply = <&vreg_s1e_1p25>; + vdd-l4-supply = <&vreg_s1c_1p86>; + vdd-l5-l6-supply = <&vreg_s1c_1p86>; + vdd-l7-bob-supply = <&vreg_bob>; + + vreg_s1e_1p25: smps1 { + regulator-name = "vreg_s1e_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1296000>; + }; + + vreg_s2e_0p85: smps2 { + regulator-name = "vreg_s2e_0p85"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + vreg_l1e_0p8: ldo1 { + regulator-name = "vreg_l1e_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l4e_1p7: ldo4 { + regulator-name = "vreg_l4e_1p7"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1776000>; + }; + + vreg_l5e_0p88: ldo5 { + regulator-name = "vreg_l5e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + vreg_l6e_1p2: ldo6 { + regulator-name = "vreg_l6e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; }; &qupv3_id_0 {
Signature · 1 line
2.31.1
PATCH v3 7/11 arm64: dts: qcom: sm8450: add ufs nodes
In reply to Vinod KoulAdd the UFS and QMP PHY node for SM8450 SoC
--- arch/arm64/boot/dts/qcom/sm8450.dtsi | 72 ++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+)
arch/arm64/boot/dts/qcom/sm8450.dtsi +72 -0
@@ -815,6 +815,78 @@ rpmhcc: clock-controller { clocks = <&xo_board>; }; }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sm8450-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0xe0 0x0>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = + <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm8450-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0xe10>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", "ref_aux", "qref"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_0_CLKREF_EN>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: lanes@1d87400 { + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; + #phy-cells = <0>; + #clock-cells = <0>; + }; + }; }; timer {
Signature · 1 line
2.31.1
PATCH v3 8/11 arm64: dts: qcom: sm8450-qrd: enable ufs nodes
In reply to Vinod KoulEnable the UFS and phy node and add the regulators used by them.
--- arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
arch/arm64/boot/dts/qcom/sm8450-qrd.dts +20 -0
@@ -353,3 +353,23 @@ &tlmm { &uart7 { status = "okay"; }; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b_2p5>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <1200000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + vdda-max-microamp = <173000>; + vdda-pll-max-microamp = <24900>; +};
Signature · 1 line
2.31.1
PATCH v3 9/11 arm64: dts: qcom: sm8450: Add rpmhpd node
In reply to Vinod KoulFrom: Dmitry Baryshkov <[email protected]>
This adds RPMH power domain found in SM8450 SoC
--- arch/arm64/boot/dts/qcom/sm8450.dtsi | 51 ++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+)
arch/arm64/boot/dts/qcom/sm8450.dtsi +51 -0
@@ -7,6 +7,7 @@ #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> / {
@@ -814,6 +815,56 @@ rpmhcc: clock-controller { clock-names = "xo"; clocks = <&xo_board>; }; + + rpmhpd: power-controller { + compatible = "qcom,sm8450-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; }; ufs_mem_hc: ufshc@1d84000 {
Signature · 1 line
2.31.1
PATCH v3 10/11 arm64: dts: qcom: sm8450: add cpufreq support
In reply to Vinod KoulFrom: Vladimir Zapolskiy <[email protected]>
The change adds a description of a SM8450 cpufreq-epss controller and references to it from CPU nodes.
--- arch/arm64/boot/dts/qcom/sm8450.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
arch/arm64/boot/dts/qcom/sm8450.dtsi +23 -0
@@ -44,6 +44,7 @@ CPU0: cpu@0 { next-level-cache = <&L2_0>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; L2_0: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>;
@@ -61,6 +62,7 @@ CPU1: cpu@100 { next-level-cache = <&L2_100>; power-domains = <&CPU_PD1>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; L2_100: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>;
@@ -75,6 +77,7 @@ CPU2: cpu@200 { next-level-cache = <&L2_200>; power-domains = <&CPU_PD2>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; L2_200: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>;
@@ -89,6 +92,7 @@ CPU3: cpu@300 { next-level-cache = <&L2_300>; power-domains = <&CPU_PD3>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; L2_300: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>;
@@ -103,6 +107,7 @@ CPU4: cpu@400 { next-level-cache = <&L2_400>; power-domains = <&CPU_PD4>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; L2_400: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>;
@@ -117,6 +122,7 @@ CPU5: cpu@500 { next-level-cache = <&L2_500>; power-domains = <&CPU_PD5>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; L2_500: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>;
@@ -132,6 +138,7 @@ CPU6: cpu@600 { next-level-cache = <&L2_600>; power-domains = <&CPU_PD6>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; L2_600: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>;
@@ -146,6 +153,7 @@ CPU7: cpu@700 { next-level-cache = <&L2_700>; power-domains = <&CPU_PD7>; power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 2>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>;
@@ -867,6 +875,21 @@ rpmhpd_opp_turbo_l1: opp10 { }; }; + cpufreq_hw: cpufreq@17d91000 { + compatible = "qcom,sm8450-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x17d91000 0 0x1000>, + <0 0x17d92000 0 0x1000>, + <0 0x17d93000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1", "freq-domain2"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; + #freq-domain-cells = <1>; + }; + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8450-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
Signature · 1 line
2.31.1
PATCH v3 11/11 arm64: dts: qcom: sm8450: add i2c13 and i2c14 device nodes
In reply to Vinod KoulFrom: Dmitry Baryshkov <[email protected]>
Add device tree nodes for two i2c blocks: i2c13 and i2c14.
--- arch/arm64/boot/dts/qcom/sm8450.dtsi | 52 ++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+)
arch/arm64/boot/dts/qcom/sm8450.dtsi +52 -0
@@ -582,6 +582,44 @@ uart7: serial@99c000 { }; }; + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_data_clk>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_data_clk>; + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -609,6 +647,20 @@ tlmm: pinctrl@f100000 { gpio-ranges = <&tlmm 0 0 211>; wakeup-parent = <&pdc>; + qup_i2c13_data_clk: qup-i2c13-data-clk { + pins = "gpio48", "gpio49"; + function = "qup13"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk { + pins = "gpio52", "gpio53"; + function = "qup14"; + drive-strength = <2>; + bias-pull-up; + }; + qup_uart7_rx: qup-uart7-rx { pins = "gpio26"; function = "qup7";
Signature · 1 line
2.31.1
Bjorn Andersson
AppliedQuoted 9 lines · Vinod Koul
Snapdragon 8 Gen 1 Mobile Platform [1] (SM8450) is the latest Qualcomm SoC announced today.
This series adds the DTS support including clocks, tlmm, smmu, regulators, ufs, interconnects, pmics and cpufreq found in the SM8450 QRD board.
[1]: https://www.qualcomm.com/products/snapdragon-8-gen-1-mobile-platform
[...]
Applied, thanks!
[01/11] arm64: dts: qcom: Add base SM8450 DTSI
commit: 5188049c9b36d718124e2cce91803a26a34a0ad6
[02/11] arm64: dts: qcom: sm8450: Add tlmm nodes
commit: ec950d55728459248e78f5c70ab3e3c2f7c22e38
[03/11] arm64: dts: qcom: sm8450: Add reserved memory nodes
commit: 285f97bc4b017b013d273a69ba3ee12252990812
[04/11] arm64: dts: qcom: sm8450: add smmu nodes
commit: 892d5395396d5515c42e502810884225776b3b10
[05/11] arm64: dts: qcom: Add base SM8450 QRD DTS
commit: 24de05c38e6bfe80fccc3b632c142accfaa7232d
[06/11] arm64: dts: qcom: sm8450-qrd: Add rpmh regulator nodes
commit: 128914ad230354ab4af9c3b86fdce2147f467553
[07/11] arm64: dts: qcom: sm8450: add ufs nodes
commit: 07fa917a335e139a108e94085c6beac3098e3874
[08/11] arm64: dts: qcom: sm8450-qrd: enable ufs nodes
commit: 8f8f98c881686d21fc937f469d3a198f2f9bb9ba
[09/11] arm64: dts: qcom: sm8450: Add rpmhpd node
commit: 61eba74e473ed4cd64ec17440092f4a98913cda3
[10/11] arm64: dts: qcom: sm8450: add cpufreq support
commit: 015a89f0d317dce4d2174059155c2fc39db7cbc8
[11/11] arm64: dts: qcom: sm8450: add i2c13 and i2c14 device nodes
commit: bf0a257a9418ebcbe6ab2a73728f76969942e52aBest regards,
Signature · 1 line
Bjorn Andersson <[email protected]>